diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/dsa/ar9331.txt')
-rw-r--r-- | Documentation/devicetree/bindings/net/dsa/ar9331.txt | 147 |
1 files changed, 0 insertions, 147 deletions
diff --git a/Documentation/devicetree/bindings/net/dsa/ar9331.txt b/Documentation/devicetree/bindings/net/dsa/ar9331.txt deleted file mode 100644 index f824fdae0d..0000000000 --- a/Documentation/devicetree/bindings/net/dsa/ar9331.txt +++ /dev/null @@ -1,147 +0,0 @@ -Atheros AR9331 built-in switch -============================= - -It is a switch built-in to Atheros AR9331 WiSoC and addressable over internal -MDIO bus. All PHYs are built-in as well. - -Required properties: - - - compatible: should be: "qca,ar9331-switch" - - reg: Address on the MII bus for the switch. - - resets : Must contain an entry for each entry in reset-names. - - reset-names : Must include the following entries: "switch" - - interrupt-parent: Phandle to the parent interrupt controller - - interrupts: IRQ line for the switch - - interrupt-controller: Indicates the switch is itself an interrupt - controller. This is used for the PHY interrupts. - - #interrupt-cells: must be 1 - - mdio: Container of PHY and devices on the switches MDIO bus. - -See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional -required and optional properties. -Examples: - -eth0: ethernet@19000000 { - compatible = "qca,ar9330-eth"; - reg = <0x19000000 0x200>; - interrupts = <4>; - - resets = <&rst 9>, <&rst 22>; - reset-names = "mac", "mdio"; - clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>; - clock-names = "eth", "mdio"; - - phy-mode = "mii"; - phy-handle = <&phy_port4>; -}; - -eth1: ethernet@1a000000 { - compatible = "qca,ar9330-eth"; - reg = <0x1a000000 0x200>; - interrupts = <5>; - resets = <&rst 13>, <&rst 23>; - reset-names = "mac", "mdio"; - clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>; - clock-names = "eth", "mdio"; - - phy-mode = "gmii"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - switch10: switch@10 { - #address-cells = <1>; - #size-cells = <0>; - - compatible = "qca,ar9331-switch"; - reg = <0x10>; - resets = <&rst 8>; - reset-names = "switch"; - - interrupt-parent = <&miscintc>; - interrupts = <12>; - - interrupt-controller; - #interrupt-cells = <1>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - switch_port0: port@0 { - reg = <0x0>; - ethernet = <ð1>; - - phy-mode = "gmii"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - switch_port1: port@1 { - reg = <0x1>; - phy-handle = <&phy_port0>; - phy-mode = "internal"; - }; - - switch_port2: port@2 { - reg = <0x2>; - phy-handle = <&phy_port1>; - phy-mode = "internal"; - }; - - switch_port3: port@3 { - reg = <0x3>; - phy-handle = <&phy_port2>; - phy-mode = "internal"; - }; - - switch_port4: port@4 { - reg = <0x4>; - phy-handle = <&phy_port3>; - phy-mode = "internal"; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - interrupt-parent = <&switch10>; - - phy_port0: phy@0 { - reg = <0x0>; - interrupts = <0>; - }; - - phy_port1: phy@1 { - reg = <0x1>; - interrupts = <0>; - }; - - phy_port2: phy@2 { - reg = <0x2>; - interrupts = <0>; - }; - - phy_port3: phy@3 { - reg = <0x3>; - interrupts = <0>; - }; - - phy_port4: phy@4 { - reg = <0x4>; - interrupts = <0>; - }; - }; - }; - }; -}; |