1 files changed, 158 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
new file mode 100644
index 0000000000..833d2f68da
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/renesas,rzn1-a5psw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1 Advanced 5 ports ethernet switch
+
+maintainers:
+  - Clément Léger <clement.leger@bootlin.com>
+
+description: |
+  The advanced 5 ports switch is present on the Renesas RZ/N1 SoC family and
+  handles 4 ports + 1 CPU management port.
+
+allOf:
+  - $ref: dsa.yaml#/$defs/ethernet-ports
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a06g032-a5psw
+      - const: renesas,rzn1-a5psw
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Device Level Ring (DLR) interrupt
+      - description: Switch interrupt
+      - description: Parallel Redundancy Protocol (PRP) interrupt
+      - description: Integrated HUB module interrupt
+      - description: Receive Pattern Match interrupt
+
+  interrupt-names:
+    items:
+      - const: dlr
+      - const: switch
+      - const: prp
+      - const: hub
+      - const: ptrn
+
+  power-domains:
+    maxItems: 1
+
+  mdio:
+    $ref: /schemas/net/mdio.yaml#
+    unevaluatedProperties: false
+
+  clocks:
+    items:
+      - description: AHB clock used for the switch register interface
+      - description: Switch system clock
+
+  clock-names:
+    items:
+      - const: hclk
+      - const: clk
+
+  ethernet-ports:
+    type: object
+    properties:
+      '#address-cells':
+        const: 1
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      "^(ethernet-)?port@[0-4]$":
+        type: object
+        description: Ethernet switch ports
+
+        properties:
+          pcs-handle:
+            maxItems: 1
+            description:
+              phandle pointing to a PCS sub-node compatible with
+              renesas,rzn1-miic.yaml#
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    switch@44050000 {
+        compatible = "renesas,r9a06g032-a5psw", "renesas,rzn1-a5psw";
+        reg = <0x44050000 0x10000>;
+        clocks = <&sysctrl R9A06G032_HCLK_SWITCH>, <&sysctrl R9A06G032_CLK_SWITCH>;
+        clock-names = "hclk", "clk";
+        power-domains = <&sysctrl>;
+        interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "dlr", "switch", "prp", "hub", "ptrn";
+
+        dsa,member = <0 0>;
+
+        ethernet-ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                label = "lan0";
+                phy-handle = <&switch0phy3>;
+                pcs-handle = <&mii_conv4>;
+            };
+
+            port@1 {
+                reg = <1>;
+                label = "lan1";
+                phy-handle = <&switch0phy1>;
+                pcs-handle = <&mii_conv3>;
+            };
+
+            port@4 {
+                reg = <4>;
+                ethernet = <&gmac2>;
+                phy-mode = "internal";
+
+                fixed-link {
+                  speed = <1000>;
+                  full-duplex;
+                };
+            };
+        };
+
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            reset-gpios = <&gpio0a 2 GPIO_ACTIVE_HIGH>;
+            reset-delay-us = <15>;
+            clock-frequency = <2500000>;
+
+            switch0phy1: ethernet-phy@1{
+                reg = <1>;
+            };
+
+            switch0phy3: ethernet-phy@3{
+                reg = <3>;
+            };
+        };
+    };