summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml')
-rw-r--r--Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml468
1 files changed, 468 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
new file mode 100644
index 0000000000..7d5f982a3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
@@ -0,0 +1,468 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/wireless/qcom,ath11k.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies ath11k wireless devices
+
+maintainers:
+ - Kalle Valo <kvalo@kernel.org>
+
+description: |
+ These are dt entries for Qualcomm Technologies, Inc. IEEE 802.11ax
+ devices, for example like AHB based IPQ8074.
+
+properties:
+ compatible:
+ enum:
+ - qcom,ipq8074-wifi
+ - qcom,ipq6018-wifi
+ - qcom,wcn6750-wifi
+ - qcom,ipq5018-wifi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 32
+ maxItems: 52
+
+ interrupt-names:
+ maxItems: 52
+
+ qcom,rproc:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ DT entry of q6v5-wcss remoteproc driver.
+ Phandle to a node that can contain the following properties
+ * compatible
+ * reg
+ * reg-names
+
+ qcom,ath11k-calibration-variant:
+ $ref: /schemas/types.yaml#/definitions/string
+ description:
+ string to uniquely identify variant of the calibration data in the
+ board-2.bin for designs with colliding bus and device specific ids
+
+ memory-region:
+ minItems: 1
+ maxItems: 2
+ description:
+ phandle to a node describing reserved memory (System RAM memory)
+ used by ath11k firmware (see bindings/reserved-memory/reserved-memory.txt)
+
+ iommus:
+ minItems: 1
+ maxItems: 2
+
+ wifi-firmware:
+ type: object
+ description: |
+ WCN6750 wifi node can contain one optional firmware subnode.
+ Firmware subnode is needed when the platform does not have Trustzone.
+ required:
+ - iommus
+
+ qcom,smem-states:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: State bits used by the AP to signal the WLAN Q6.
+ items:
+ - description: Signal bits used to enable/disable low power mode
+ on WCN6750 in the case of WoW (Wake on Wireless).
+
+ qcom,smem-state-names:
+ description: The names of the state bits used for SMP2P output.
+ items:
+ - const: wlan-smp2p-out
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - qcom,rproc
+
+additionalProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,ipq8074-wifi
+ - qcom,ipq6018-wifi
+ then:
+ properties:
+ interrupts:
+ items:
+ - description: misc-pulse1 interrupt events
+ - description: misc-latch interrupt events
+ - description: sw exception interrupt events
+ - description: watchdog interrupt events
+ - description: interrupt event for ring CE0
+ - description: interrupt event for ring CE1
+ - description: interrupt event for ring CE2
+ - description: interrupt event for ring CE3
+ - description: interrupt event for ring CE4
+ - description: interrupt event for ring CE5
+ - description: interrupt event for ring CE6
+ - description: interrupt event for ring CE7
+ - description: interrupt event for ring CE8
+ - description: interrupt event for ring CE9
+ - description: interrupt event for ring CE10
+ - description: interrupt event for ring CE11
+ - description: interrupt event for ring host2wbm-desc-feed
+ - description: interrupt event for ring host2reo-re-injection
+ - description: interrupt event for ring host2reo-command
+ - description: interrupt event for ring host2rxdma-monitor-ring3
+ - description: interrupt event for ring host2rxdma-monitor-ring2
+ - description: interrupt event for ring host2rxdma-monitor-ring1
+ - description: interrupt event for ring reo2ost-exception
+ - description: interrupt event for ring wbm2host-rx-release
+ - description: interrupt event for ring reo2host-status
+ - description: interrupt event for ring reo2host-destination-ring4
+ - description: interrupt event for ring reo2host-destination-ring3
+ - description: interrupt event for ring reo2host-destination-ring2
+ - description: interrupt event for ring reo2host-destination-ring1
+ - description: interrupt event for ring rxdma2host-monitor-destination-mac3
+ - description: interrupt event for ring rxdma2host-monitor-destination-mac2
+ - description: interrupt event for ring rxdma2host-monitor-destination-mac1
+ - description: interrupt event for ring ppdu-end-interrupts-mac3
+ - description: interrupt event for ring ppdu-end-interrupts-mac2
+ - description: interrupt event for ring ppdu-end-interrupts-mac1
+ - description: interrupt event for ring rxdma2host-monitor-status-ring-mac3
+ - description: interrupt event for ring rxdma2host-monitor-status-ring-mac2
+ - description: interrupt event for ring rxdma2host-monitor-status-ring-mac1
+ - description: interrupt event for ring host2rxdma-host-buf-ring-mac3
+ - description: interrupt event for ring host2rxdma-host-buf-ring-mac2
+ - description: interrupt event for ring host2rxdma-host-buf-ring-mac1
+ - description: interrupt event for ring rxdma2host-destination-ring-mac3
+ - description: interrupt event for ring rxdma2host-destination-ring-mac2
+ - description: interrupt event for ring rxdma2host-destination-ring-mac1
+ - description: interrupt event for ring host2tcl-input-ring4
+ - description: interrupt event for ring host2tcl-input-ring3
+ - description: interrupt event for ring host2tcl-input-ring2
+ - description: interrupt event for ring host2tcl-input-ring1
+ - description: interrupt event for ring wbm2host-tx-completions-ring3
+ - description: interrupt event for ring wbm2host-tx-completions-ring2
+ - description: interrupt event for ring wbm2host-tx-completions-ring1
+ - description: interrupt event for ring tcl2host-status-ring
+ interrupt-names:
+ items:
+ - const: misc-pulse1
+ - const: misc-latch
+ - const: sw-exception
+ - const: watchdog
+ - const: ce0
+ - const: ce1
+ - const: ce2
+ - const: ce3
+ - const: ce4
+ - const: ce5
+ - const: ce6
+ - const: ce7
+ - const: ce8
+ - const: ce9
+ - const: ce10
+ - const: ce11
+ - const: host2wbm-desc-feed
+ - const: host2reo-re-injection
+ - const: host2reo-command
+ - const: host2rxdma-monitor-ring3
+ - const: host2rxdma-monitor-ring2
+ - const: host2rxdma-monitor-ring1
+ - const: reo2ost-exception
+ - const: wbm2host-rx-release
+ - const: reo2host-status
+ - const: reo2host-destination-ring4
+ - const: reo2host-destination-ring3
+ - const: reo2host-destination-ring2
+ - const: reo2host-destination-ring1
+ - const: rxdma2host-monitor-destination-mac3
+ - const: rxdma2host-monitor-destination-mac2
+ - const: rxdma2host-monitor-destination-mac1
+ - const: ppdu-end-interrupts-mac3
+ - const: ppdu-end-interrupts-mac2
+ - const: ppdu-end-interrupts-mac1
+ - const: rxdma2host-monitor-status-ring-mac3
+ - const: rxdma2host-monitor-status-ring-mac2
+ - const: rxdma2host-monitor-status-ring-mac1
+ - const: host2rxdma-host-buf-ring-mac3
+ - const: host2rxdma-host-buf-ring-mac2
+ - const: host2rxdma-host-buf-ring-mac1
+ - const: rxdma2host-destination-ring-mac3
+ - const: rxdma2host-destination-ring-mac2
+ - const: rxdma2host-destination-ring-mac1
+ - const: host2tcl-input-ring4
+ - const: host2tcl-input-ring3
+ - const: host2tcl-input-ring2
+ - const: host2tcl-input-ring1
+ - const: wbm2host-tx-completions-ring3
+ - const: wbm2host-tx-completions-ring2
+ - const: wbm2host-tx-completions-ring1
+ - const: tcl2host-status-ring
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,ipq8074-wifi
+ - qcom,ipq6018-wifi
+ then:
+ required:
+ - interrupt-names
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,wcn6750-wifi
+ then:
+ properties:
+ interrupts:
+ items:
+ - description: interrupt event for ring CE1
+ - description: interrupt event for ring CE2
+ - description: interrupt event for ring CE3
+ - description: interrupt event for ring CE4
+ - description: interrupt event for ring CE5
+ - description: interrupt event for ring CE6
+ - description: interrupt event for ring CE7
+ - description: interrupt event for ring CE8
+ - description: interrupt event for ring CE9
+ - description: interrupt event for ring CE10
+ - description: interrupt event for ring DP1
+ - description: interrupt event for ring DP2
+ - description: interrupt event for ring DP3
+ - description: interrupt event for ring DP4
+ - description: interrupt event for ring DP5
+ - description: interrupt event for ring DP6
+ - description: interrupt event for ring DP7
+ - description: interrupt event for ring DP8
+ - description: interrupt event for ring DP9
+ - description: interrupt event for ring DP10
+ - description: interrupt event for ring DP11
+ - description: interrupt event for ring DP12
+ - description: interrupt event for ring DP13
+ - description: interrupt event for ring DP14
+ - description: interrupt event for ring DP15
+ - description: interrupt event for ring DP16
+ - description: interrupt event for ring DP17
+ - description: interrupt event for ring DP18
+ - description: interrupt event for ring DP19
+ - description: interrupt event for ring DP20
+ - description: interrupt event for ring DP21
+ - description: interrupt event for ring DP22
+
+examples:
+ - |
+
+ q6v5_wcss: remoteproc@cd00000 {
+ compatible = "qcom,ipq8074-wcss-pil";
+ reg = <0xcd00000 0x4040>,
+ <0x4ab000 0x20>;
+ reg-names = "qdsp6",
+ "rmb";
+ };
+
+ wifi0: wifi@c000000 {
+ compatible = "qcom,ipq8074-wifi";
+ reg = <0xc000000 0x2000000>;
+ interrupts = <0 320 1>,
+ <0 319 1>,
+ <0 318 1>,
+ <0 317 1>,
+ <0 316 1>,
+ <0 315 1>,
+ <0 314 1>,
+ <0 311 1>,
+ <0 310 1>,
+ <0 411 1>,
+ <0 410 1>,
+ <0 40 1>,
+ <0 39 1>,
+ <0 302 1>,
+ <0 301 1>,
+ <0 37 1>,
+ <0 36 1>,
+ <0 296 1>,
+ <0 295 1>,
+ <0 294 1>,
+ <0 293 1>,
+ <0 292 1>,
+ <0 291 1>,
+ <0 290 1>,
+ <0 289 1>,
+ <0 288 1>,
+ <0 239 1>,
+ <0 236 1>,
+ <0 235 1>,
+ <0 234 1>,
+ <0 233 1>,
+ <0 232 1>,
+ <0 231 1>,
+ <0 230 1>,
+ <0 229 1>,
+ <0 228 1>,
+ <0 224 1>,
+ <0 223 1>,
+ <0 203 1>,
+ <0 183 1>,
+ <0 180 1>,
+ <0 179 1>,
+ <0 178 1>,
+ <0 177 1>,
+ <0 176 1>,
+ <0 163 1>,
+ <0 162 1>,
+ <0 160 1>,
+ <0 159 1>,
+ <0 158 1>,
+ <0 157 1>,
+ <0 156 1>;
+ interrupt-names = "misc-pulse1",
+ "misc-latch",
+ "sw-exception",
+ "watchdog",
+ "ce0",
+ "ce1",
+ "ce2",
+ "ce3",
+ "ce4",
+ "ce5",
+ "ce6",
+ "ce7",
+ "ce8",
+ "ce9",
+ "ce10",
+ "ce11",
+ "host2wbm-desc-feed",
+ "host2reo-re-injection",
+ "host2reo-command",
+ "host2rxdma-monitor-ring3",
+ "host2rxdma-monitor-ring2",
+ "host2rxdma-monitor-ring1",
+ "reo2ost-exception",
+ "wbm2host-rx-release",
+ "reo2host-status",
+ "reo2host-destination-ring4",
+ "reo2host-destination-ring3",
+ "reo2host-destination-ring2",
+ "reo2host-destination-ring1",
+ "rxdma2host-monitor-destination-mac3",
+ "rxdma2host-monitor-destination-mac2",
+ "rxdma2host-monitor-destination-mac1",
+ "ppdu-end-interrupts-mac3",
+ "ppdu-end-interrupts-mac2",
+ "ppdu-end-interrupts-mac1",
+ "rxdma2host-monitor-status-ring-mac3",
+ "rxdma2host-monitor-status-ring-mac2",
+ "rxdma2host-monitor-status-ring-mac1",
+ "host2rxdma-host-buf-ring-mac3",
+ "host2rxdma-host-buf-ring-mac2",
+ "host2rxdma-host-buf-ring-mac1",
+ "rxdma2host-destination-ring-mac3",
+ "rxdma2host-destination-ring-mac2",
+ "rxdma2host-destination-ring-mac1",
+ "host2tcl-input-ring4",
+ "host2tcl-input-ring3",
+ "host2tcl-input-ring2",
+ "host2tcl-input-ring1",
+ "wbm2host-tx-completions-ring3",
+ "wbm2host-tx-completions-ring2",
+ "wbm2host-tx-completions-ring1",
+ "tcl2host-status-ring";
+ qcom,rproc = <&q6v5_wcss>;
+ };
+
+ - |
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ qcn9074_0: wifi@51100000 {
+ no-map;
+ reg = <0x0 0x51100000 0x0 0x03500000>;
+ };
+ };
+
+ pci {
+ pcie0 {
+ #size-cells = <2>;
+ #address-cells = <3>;
+
+ wifi_0: wifi@0 {
+ reg = <0 0 0 0 0>;
+ memory-region = <&qcn9074_0>;
+ };
+ };
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ wlan_ce_mem: memory@4cd000 {
+ no-map;
+ reg = <0x0 0x004cd000 0x0 0x1000>;
+ };
+
+ wlan_fw_mem: memory@80c00000 {
+ no-map;
+ reg = <0x0 0x80c00000 0x0 0xc00000>;
+ };
+ };
+
+ wifi: wifi@17a10040 {
+ compatible = "qcom,wcn6750-wifi";
+ reg = <0x17a10040 0x0>;
+ iommus = <&apps_smmu 0x1c00 0x1>;
+ interrupts = <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 769 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 770 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 771 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 773 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 774 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 775 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 776 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 777 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 778 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 779 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 780 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 781 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 782 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 783 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 784 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 785 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 786 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 787 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 788 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 789 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 790 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 791 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 792 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 793 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 794 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 795 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 796 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 797 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 798 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 799 IRQ_TYPE_EDGE_RISING>;
+ qcom,rproc = <&remoteproc_wpss>;
+ memory-region = <&wlan_fw_mem>, <&wlan_ce_mem>;
+ qcom,smem-states = <&wlan_smp2p_out 0>;
+ qcom,smem-state-names = "wlan-smp2p-out";
+ wifi-firmware {
+ iommus = <&apps_smmu 0x1c02 0x1>;
+ };
+ };