diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net')
26 files changed, 703 insertions, 78 deletions
diff --git a/Documentation/devicetree/bindings/net/airoha,en8811h.yaml b/Documentation/devicetree/bindings/net/airoha,en8811h.yaml new file mode 100644 index 0000000000..ecb5149ec6 --- /dev/null +++ b/Documentation/devicetree/bindings/net/airoha,en8811h.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/airoha,en8811h.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Airoha EN8811H PHY + +maintainers: + - Eric Woudstra <ericwouds@gmail.com> + +description: + The Airoha EN8811H PHY has the ability to reverse polarity + on the lines to and/or from the MAC. It is reversed by + the booleans in the devicetree node of the phy. + +allOf: + - $ref: ethernet-phy.yaml# + +properties: + compatible: + enum: + - ethernet-phy-id03a2.a411 + + reg: + maxItems: 1 + + airoha,pnswap-rx: + type: boolean + description: + Reverse rx polarity of the SERDES. This is the receiving + side of the lines from the MAC towards the EN881H. + + airoha,pnswap-tx: + type: boolean + description: + Reverse tx polarity of SERDES. This is the transmitting + side of the lines from EN8811H towards the MAC. + +required: + - reg + +unevaluatedProperties: false + +examples: + - | + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@1 { + compatible = "ethernet-phy-id03a2.a411"; + reg = <1>; + airoha,pnswap-rx; + }; + }; diff --git a/Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7921s-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7921s-bluetooth.yaml new file mode 100644 index 0000000000..67ff7caad5 --- /dev/null +++ b/Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7921s-bluetooth.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/bluetooth/mediatek,mt7921s-bluetooth.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT7921S Bluetooth + +maintainers: + - Sean Wang <sean.wang@mediatek.com> + +description: + MT7921S is an SDIO-attached dual-radio WiFi+Bluetooth Combo chip; each + function is its own SDIO function on a shared SDIO interface. The chip + has two dedicated reset lines, one for each function core. + This binding only covers the Bluetooth SDIO function, with one device + node describing only this SDIO function. + +allOf: + - $ref: bluetooth-controller.yaml# + +properties: + compatible: + enum: + - mediatek,mt7921s-bluetooth + + reg: + const: 2 + + reset-gpios: + maxItems: 1 + description: + An active-low reset line for the Bluetooth core; on typical M.2 + key E modules this is the W_DISABLE2# pin. + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + mmc { + #address-cells = <1>; + #size-cells = <0>; + + bluetooth@2 { + compatible = "mediatek,mt7921s-bluetooth"; + reg = <2>; + reset-gpios = <&pio 8 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml b/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml index cc70b00c6c..4a1bfc2b35 100644 --- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml @@ -14,20 +14,25 @@ description: properties: compatible: - enum: - - brcm,bcm20702a1 - - brcm,bcm4329-bt - - brcm,bcm4330-bt - - brcm,bcm4334-bt - - brcm,bcm43430a0-bt - - brcm,bcm43430a1-bt - - brcm,bcm43438-bt - - brcm,bcm4345c5 - - brcm,bcm43540-bt - - brcm,bcm4335a0 - - brcm,bcm4349-bt - - cypress,cyw4373a0-bt - - infineon,cyw55572-bt + oneOf: + - items: + - enum: + - infineon,cyw43439-bt + - const: brcm,bcm4329-bt + - enum: + - brcm,bcm20702a1 + - brcm,bcm4329-bt + - brcm,bcm4330-bt + - brcm,bcm4334-bt + - brcm,bcm43430a0-bt + - brcm,bcm43430a1-bt + - brcm,bcm43438-bt + - brcm,bcm4345c5 + - brcm,bcm43540-bt + - brcm,bcm4335a0 + - brcm,bcm4349-bt + - cypress,cyw4373a0-bt + - infineon,cyw55572-bt shutdown-gpios: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml index f9ffb963d6..c4887522e8 100644 --- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml +++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml @@ -118,6 +118,10 @@ properties: phys: maxItems: 1 + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml b/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml index c80c880a9d..60aaf30d68 100644 --- a/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml +++ b/Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml @@ -128,7 +128,6 @@ required: - cell-index - reg - fsl,fman-ports - - ptp-timer dependencies: pcs-handle-names: diff --git a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml index 4c01cae7c9..87bc4416ea 100644 --- a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml +++ b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml @@ -66,6 +66,10 @@ properties: Should be phandle/offset pair. The phandle to the syscon node which encompases the GPR register, and the offset of the GPR register. + nvmem-cells: true + + nvmem-cell-names: true + snps,rmii_refclk_ext: $ref: /schemas/types.yaml#/definitions/flag description: diff --git a/Documentation/devicetree/bindings/net/pse-pd/microchip,pd692x0.yaml b/Documentation/devicetree/bindings/net/pse-pd/microchip,pd692x0.yaml new file mode 100644 index 0000000000..fd4244fcec --- /dev/null +++ b/Documentation/devicetree/bindings/net/pse-pd/microchip,pd692x0.yaml @@ -0,0 +1,176 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/pse-pd/microchip,pd692x0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PD692x0 Power Sourcing Equipment controller + +maintainers: + - Kory Maincent <kory.maincent@bootlin.com> + +allOf: + - $ref: pse-controller.yaml# + +properties: + compatible: + enum: + - microchip,pd69200 + - microchip,pd69210 + - microchip,pd69220 + + reg: + maxItems: 1 + + managers: + type: object + additionalProperties: false + description: + List of the PD69208T4/PD69204T4/PD69208M PSE managers. Each manager + have 4 or 8 physical ports according to the chip version. No need to + specify the SPI chip select as it is automatically detected by the + PD692x0 PSE controller. The PSE managers have to be described from + the lowest chip select to the greatest one, which is the detection + behavior of the PD692x0 PSE controller. The PD692x0 support up to + 12 PSE managers which can expose up to 96 physical ports. All + physical ports available on a manager have to be described in the + incremental order even if they are not used. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + required: + - "#address-cells" + - "#size-cells" + + patternProperties: + "^manager@[0-9a-b]$": + type: object + additionalProperties: false + description: + PD69208T4/PD69204T4/PD69208M PSE manager exposing 4 or 8 physical + ports. + + properties: + reg: + description: + Incremental index of the PSE manager starting from 0, ranging + from lowest to highest chip select, up to 11. + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + '^port@[0-7]$': + type: object + additionalProperties: false + + properties: + reg: + maxItems: 1 + + required: + - reg + + required: + - reg + - "#address-cells" + - "#size-cells" + +required: + - compatible + - reg + - pse-pis + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-pse@3c { + compatible = "microchip,pd69200"; + reg = <0x3c>; + + managers { + #address-cells = <1>; + #size-cells = <0>; + + manager@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + phys0: port@0 { + reg = <0>; + }; + + phys1: port@1 { + reg = <1>; + }; + + phys2: port@2 { + reg = <2>; + }; + + phys3: port@3 { + reg = <3>; + }; + }; + + manager@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + phys4: port@0 { + reg = <0>; + }; + + phys5: port@1 { + reg = <1>; + }; + + phys6: port@2 { + reg = <2>; + }; + + phys7: port@3 { + reg = <3>; + }; + }; + }; + + pse-pis { + #address-cells = <1>; + #size-cells = <0>; + + pse_pi0: pse-pi@0 { + reg = <0>; + #pse-cells = <0>; + pairset-names = "alternative-a", "alternative-b"; + pairsets = <&phys0>, <&phys1>; + polarity-supported = "MDI", "S"; + vpwr-supply = <&vpwr1>; + }; + pse_pi1: pse-pi@1 { + reg = <1>; + #pse-cells = <0>; + pairset-names = "alternative-a"; + pairsets = <&phys2>; + polarity-supported = "MDI"; + vpwr-supply = <&vpwr2>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml b/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml index 2d382faca0..a12cda8aa7 100644 --- a/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml +++ b/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml @@ -13,6 +13,7 @@ description: Binding for the Power Sourcing Equipment (PSE) as defined in the maintainers: - Oleksij Rempel <o.rempel@pengutronix.de> + - Kory Maincent <kory.maincent@bootlin.com> properties: $nodename: @@ -22,11 +23,105 @@ properties: description: Used to uniquely identify a PSE instance within an IC. Will be 0 on PSE nodes with only a single output and at least 1 on nodes - controlling several outputs. + controlling several outputs which are not described in the pse-pis + subnode. This property is deprecated, please use pse-pis instead. enum: [0, 1] -required: - - "#pse-cells" + pse-pis: + type: object + description: + Overview of the PSE PIs provided by the controller. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + required: + - "#address-cells" + - "#size-cells" + + patternProperties: + "^pse-pi@[0-9a-f]+$": + type: object + description: + PSE PI for power delivery via pairsets, compliant with IEEE + 802.3-2022, Section 145.2.4. Each pairset comprises a positive and + a negative VPSE pair, adhering to the pinout configurations + detailed in the standard. + See Documentation/networking/pse-pd/pse-pi.rst for details. + + properties: + reg: + description: + Address describing the PSE PI index. + maxItems: 1 + + "#pse-cells": + const: 0 + + pairset-names: + $ref: /schemas/types.yaml#/definitions/string-array + description: + Names of the pairsets as per IEEE 802.3-2022, Section 145.2.4. + Each name should correspond to a phandle in the 'pairset' + property pointing to the power supply for that pairset. + minItems: 1 + maxItems: 2 + items: + enum: + - alternative-a + - alternative-b + + pairsets: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + List of phandles, each pointing to the power supply for the + corresponding pairset named in 'pairset-names'. This property + aligns with IEEE 802.3-2022, Section 33.2.3 and 145.2.4. + PSE Pinout Alternatives (as per IEEE 802.3-2022 Table 145\u20133) + |-----------|---------------|---------------|---------------|---------------| + | Conductor | Alternative A | Alternative A | Alternative B | Alternative B | + | | (MDI-X) | (MDI) | (X) | (S) | + |-----------|---------------|---------------|---------------|---------------| + | 1 | Negative VPSE | Positive VPSE | - | - | + | 2 | Negative VPSE | Positive VPSE | - | - | + | 3 | Positive VPSE | Negative VPSE | - | - | + | 4 | - | - | Negative VPSE | Positive VPSE | + | 5 | - | - | Negative VPSE | Positive VPSE | + | 6 | Positive VPSE | Negative VPSE | - | - | + | 7 | - | - | Positive VPSE | Negative VPSE | + | 8 | - | - | Positive VPSE | Negative VPSE | + minItems: 1 + maxItems: 2 + + polarity-supported: + $ref: /schemas/types.yaml#/definitions/string-array + description: + Polarity configuration supported by the PSE PI pairsets. + minItems: 1 + maxItems: 4 + items: + enum: + - MDI-X + - MDI + - X + - S + + vpwr-supply: + description: Regulator power supply for the PSE PI. + + required: + - reg + - "#pse-cells" + +oneOf: + - required: + - "#pse-cells" + - required: + - pse-pis additionalProperties: true diff --git a/Documentation/devicetree/bindings/net/pse-pd/ti,tps23881.yaml b/Documentation/devicetree/bindings/net/pse-pd/ti,tps23881.yaml new file mode 100644 index 0000000000..6992d56832 --- /dev/null +++ b/Documentation/devicetree/bindings/net/pse-pd/ti,tps23881.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/pse-pd/ti,tps23881.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI TPS23881 Power Sourcing Equipment controller + +maintainers: + - Kory Maincent <kory.maincent@bootlin.com> + +allOf: + - $ref: pse-controller.yaml# + +properties: + compatible: + enum: + - ti,tps23881 + + reg: + maxItems: 1 + + '#pse-cells': + const: 1 + + channels: + description: each set of 8 ports can be assigned to one physical + channels or two for PoE4. This parameter describes the configuration + of the ports conversion matrix that establishes relationship between + the logical ports and the physical channels. + type: object + additionalProperties: false + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + '^channel@[0-7]$': + type: object + additionalProperties: false + + properties: + reg: + maxItems: 1 + + required: + - reg + + required: + - "#address-cells" + - "#size-cells" + +unevaluatedProperties: false + +required: + - compatible + - reg + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-pse@20 { + compatible = "ti,tps23881"; + reg = <0x20>; + + channels { + #address-cells = <1>; + #size-cells = <0>; + + phys0: channel@0 { + reg = <0>; + }; + + phys1: channel@1 { + reg = <1>; + }; + + phys2: channel@2 { + reg = <2>; + }; + }; + + pse-pis { + #address-cells = <1>; + #size-cells = <0>; + + pse_pi0: pse-pi@0 { + reg = <0>; + #pse-cells = <0>; + pairset-names = "alternative-a", "alternative-b"; + pairsets = <&phys0>, <&phys1>; + polarity-supported = "MDI", "S"; + vpwr-supply = <&vpwr1>; + }; + + pse_pi1: pse-pi@1 { + reg = <1>; + #pse-cells = <0>; + pairset-names = "alternative-a"; + pairsets = <&phys2>; + polarity-supported = "MDI"; + vpwr-supply = <&vpwr2>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml index 69a337c7e3..6672327358 100644 --- a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml @@ -61,6 +61,8 @@ properties: iommus: maxItems: 1 + dma-coherent: true + phys: true phy-names: diff --git a/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml index 0029e197a8..a94480e819 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml @@ -20,6 +20,7 @@ properties: - enum: - qcom,ipq6018-mdio - qcom,ipq8074-mdio + - qcom,ipq9574-mdio - const: qcom,ipq4019-mdio "#address-cells": @@ -76,6 +77,7 @@ allOf: - qcom,ipq5018-mdio - qcom,ipq6018-mdio - qcom,ipq8074-mdio + - qcom,ipq9574-mdio then: required: - clocks diff --git a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml index de7ba7f345..21a92f1790 100644 --- a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml +++ b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml @@ -88,10 +88,16 @@ properties: '#address-cells': description: Number of address cells for the MDIO bus. const: 1 + deprecated: true '#size-cells': description: Number of size cells on the MDIO bus. const: 0 + deprecated: true + + mdio: + $ref: /schemas/net/mdio.yaml# + unevaluatedProperties: false renesas,no-ether-link: type: boolean @@ -110,9 +116,13 @@ properties: tx-internal-delay-ps: enum: [0, 2000] +# In older bindings there where no mdio child-node to describe the MDIO bus +# and the PHY. To not fail older bindings accept any node with an address. New +# users should describe the PHY inside the mdio child-node. patternProperties: "@[0-9a-f]$": type: object + deprecated: true required: - compatible @@ -123,8 +133,6 @@ required: - resets - phy-mode - phy-handle - - '#address-cells' - - '#size-cells' allOf: - $ref: ethernet-controller.yaml# diff --git a/Documentation/devicetree/bindings/net/renesas,ethertsn.yaml b/Documentation/devicetree/bindings/net/renesas,ethertsn.yaml index ea35d19be8..b4680a1d0a 100644 --- a/Documentation/devicetree/bindings/net/renesas,ethertsn.yaml +++ b/Documentation/devicetree/bindings/net/renesas,ethertsn.yaml @@ -71,16 +71,8 @@ properties: enum: [0, 2000] default: 0 - '#address-cells': - const: 1 - - '#size-cells': - const: 0 - -patternProperties: - "^ethernet-phy@[0-9a-f]$": - type: object - $ref: ethernet-phy.yaml# + mdio: + $ref: /schemas/net/mdio.yaml# unevaluatedProperties: false required: @@ -94,8 +86,7 @@ required: - resets - phy-mode - phy-handle - - '#address-cells' - - '#size-cells' + - mdio additionalProperties: false @@ -122,14 +113,18 @@ examples: tx-internal-delay-ps = <2000>; phy-handle = <&phy3>; - #address-cells = <1>; - #size-cells = <0>; + mdio { + #address-cells = <1>; + #size-cells = <0>; - phy3: ethernet-phy@3 { - compatible = "ethernet-phy-ieee802.3-c45"; - reg = <0>; - interrupt-parent = <&gpio4>; - interrupts = <3 IRQ_TYPE_LEVEL_LOW>; reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; + reset-post-delay-us = <4000>; + + phy3: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0>; + interrupt-parent = <&gpio4>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + }; }; }; diff --git a/Documentation/devicetree/bindings/net/renesas,rzn1-gmac.yaml b/Documentation/devicetree/bindings/net/renesas,rzn1-gmac.yaml new file mode 100644 index 0000000000..d9a8d586e2 --- /dev/null +++ b/Documentation/devicetree/bindings/net/renesas,rzn1-gmac.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/renesas,rzn1-gmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas GMAC + +maintainers: + - Romain Gantois <romain.gantois@bootlin.com> + +select: + properties: + compatible: + contains: + enum: + - renesas,r9a06g032-gmac + - renesas,rzn1-gmac + required: + - compatible + +allOf: + - $ref: snps,dwmac.yaml# + +properties: + compatible: + items: + - enum: + - renesas,r9a06g032-gmac + - const: renesas,rzn1-gmac + - const: snps,dwmac + + pcs-handle: + description: + phandle pointing to a PCS sub-node compatible with + renesas,rzn1-miic.yaml# + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/r9a06g032-sysctrl.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + ethernet@44000000 { + compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac"; + reg = <0x44000000 0x2000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; + clock-names = "stmmaceth"; + clocks = <&sysctrl R9A06G032_HCLK_GMAC0>; + power-domains = <&sysctrl>; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; + tx-fifo-depth = <2048>; + rx-fifo-depth = <4096>; + pcs-handle = <&mii_conv1>; + phy-mode = "mii"; + }; + +... diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml index 70bbc4220e..6bbe96e352 100644 --- a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml @@ -137,8 +137,6 @@ examples: assigned-clock-parents = <&ext_gmac>; rockchip,grf = <&grf>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; clock_in_out = "input"; - tx_delay = <0x30>; - rx_delay = <0x10>; }; diff --git a/Documentation/devicetree/bindings/net/sff,sfp.yaml b/Documentation/devicetree/bindings/net/sff,sfp.yaml index bf6cbc7c2b..90611b598d 100644 --- a/Documentation/devicetree/bindings/net/sff,sfp.yaml +++ b/Documentation/devicetree/bindings/net/sff,sfp.yaml @@ -29,39 +29,39 @@ properties: allowable by a module in the slot, in milli-Watts. Presently, modules can be up to 1W, 1.5W or 2W. - "mod-def0-gpios": + mod-def0-gpios: maxItems: 1 description: GPIO phandle and a specifier of the MOD-DEF0 (AKA Mod_ABS) module presence input gpio signal, active (module absent) high. Must not be present for SFF modules - "los-gpios": + los-gpios: maxItems: 1 description: GPIO phandle and a specifier of the Receiver Loss of Signal Indication input gpio signal, active (signal lost) high - "tx-fault-gpios": + tx-fault-gpios: maxItems: 1 description: GPIO phandle and a specifier of the Module Transmitter Fault input gpio signal, active (fault condition) high - "tx-disable-gpios": + tx-disable-gpios: maxItems: 1 description: GPIO phandle and a specifier of the Transmitter Disable output gpio signal, active (Tx disable) high - "rate-select0-gpios": + rate-select0-gpios: maxItems: 1 description: GPIO phandle and a specifier of the Rx Signaling Rate Select (AKA RS0) output gpio signal, low - low Rx rate, high - high Rx rate Must not be present for SFF modules - "rate-select1-gpios": + rate-select1-gpios: maxItems: 1 description: GPIO phandle and a specifier of the Tx Signaling Rate Select (AKA RS1) diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 6b0341a8e0..21cc27e75f 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -242,7 +242,8 @@ properties: type: boolean description: Multicast & Broadcast Packets snps,priority: - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 1 description: Bitmask of the tagged frames priorities assigned to the queue allOf: - if: @@ -327,9 +328,6 @@ properties: snps,tx-sched-dwrr: type: boolean description: Deficit Weighted Round Robin - snps,tx-sched-sp: - type: boolean - description: Strict priority allOf: - if: required: @@ -338,7 +336,6 @@ properties: properties: snps,tx-sched-wfq: false snps,tx-sched-dwrr: false - snps,tx-sched-sp: false - if: required: - snps,tx-sched-wfq @@ -346,7 +343,6 @@ properties: properties: snps,tx-sched-wrr: false snps,tx-sched-dwrr: false - snps,tx-sched-sp: false - if: required: - snps,tx-sched-dwrr @@ -354,15 +350,6 @@ properties: properties: snps,tx-sched-wrr: false snps,tx-sched-wfq: false - snps,tx-sched-sp: false - - if: - required: - - snps,tx-sched-sp - then: - properties: - snps,tx-sched-wrr: false - snps,tx-sched-wfq: false - snps,tx-sched-dwrr: false patternProperties: "^queue[0-9]$": description: Each subnode represents a queue. @@ -393,7 +380,8 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 description: max read outstanding req. limit snps,priority: - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 1 description: Bitmask of the tagged frames priorities assigned to the queue. When a PFC frame is received with priorities matching the bitmask, diff --git a/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml b/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml index 0d1962980f..313a153316 100644 --- a/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.yaml @@ -30,6 +30,10 @@ properties: - items: - const: starfive,jh7110-dwmac - const: snps,dwmac-5.20 + - items: + - const: starfive,jh8100-dwmac + - const: starfive,jh7110-dwmac + - const: snps,dwmac-5.20 reg: maxItems: 1 @@ -116,11 +120,25 @@ allOf: minItems: 3 maxItems: 3 - resets: - minItems: 2 - - reset-names: - minItems: 2 + if: + properties: + compatible: + contains: + const: starfive,jh8100-dwmac + then: + properties: + resets: + maxItems: 1 + + reset-names: + const: stmmaceth + else: + properties: + resets: + minItems: 2 + + reset-names: + minItems: 2 unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml index fc8c96b08d..7ccf75676b 100644 --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml @@ -82,6 +82,13 @@ properties: Should be phandle/offset pair. The phandle to the syscon node which encompases the glue register, and the offset of the control register + st,ext-phyclk: + description: + set this property in RMII mode when you have PHY without crystal 50MHz and want to + select RCC clock instead of ETH_REF_CLK. OR in RGMII mode when you want to select + RCC clock instead of ETH_CLK125. + type: boolean + st,eth-clk-sel: description: set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125. @@ -93,6 +100,10 @@ properties: select RCC clock instead of ETH_REF_CLK. type: boolean + access-controllers: + minItems: 1 + maxItems: 2 + required: - compatible - clocks diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml index d5bd93ee4d..d14ca81f70 100644 --- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml @@ -8,7 +8,6 @@ title: TI SoC Ethernet Switch Controller (CPSW) maintainers: - Siddharth Vadapalli <s-vadapalli@ti.com> - - Ravi Gunasekaran <r-gunasekaran@ti.com> - Roger Quadros <rogerq@kernel.org> description: diff --git a/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml b/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml index 229c8f3201..e253fa7860 100644 --- a/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml +++ b/Documentation/devicetree/bindings/net/ti,icssg-prueth.yaml @@ -13,14 +13,12 @@ description: Ethernet based on the Programmable Real-Time Unit and Industrial Communication Subsystem. -allOf: - - $ref: /schemas/remoteproc/ti,pru-consumer.yaml# - properties: compatible: enum: - - ti,am642-icssg-prueth # for AM64x SoC family - - ti,am654-icssg-prueth # for AM65x SoC family + - ti,am642-icssg-prueth # for AM64x SoC family + - ti,am654-icssg-prueth # for AM65x SoC family + - ti,am654-sr1-icssg-prueth # for AM65x SoC family, SR1.0 sram: $ref: /schemas/types.yaml#/definitions/phandle @@ -28,9 +26,11 @@ properties: phandle to MSMC SRAM node dmas: - maxItems: 10 + minItems: 10 + maxItems: 12 dma-names: + minItems: 10 items: - const: tx0-0 - const: tx0-1 @@ -42,6 +42,8 @@ properties: - const: tx1-3 - const: rx0 - const: rx1 + - const: rxmgm0 + - const: rxmgm1 ti,mii-g-rt: $ref: /schemas/types.yaml#/definitions/phandle @@ -132,6 +134,27 @@ required: - interrupts - interrupt-names +allOf: + - $ref: /schemas/remoteproc/ti,pru-consumer.yaml# + + - if: + properties: + compatible: + contains: + const: ti,am654-sr1-icssg-prueth + then: + properties: + dmas: + minItems: 12 + dma-names: + minItems: 12 + else: + properties: + dmas: + maxItems: 10 + dma-names: + maxItems: 10 + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml index 73ed5951d2..02b6d32003 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml @@ -8,7 +8,6 @@ title: The TI AM654x/J721E/AM642x SoC Gigabit Ethernet MAC (Media Access Control maintainers: - Siddharth Vadapalli <s-vadapalli@ti.com> - - Ravi Gunasekaran <r-gunasekaran@ti.com> - Roger Quadros <rogerq@kernel.org> description: diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml index b1c8753257..3888692275 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml @@ -8,7 +8,6 @@ title: The TI AM654x/J721E Common Platform Time Sync (CPTS) module maintainers: - Siddharth Vadapalli <s-vadapalli@ti.com> - - Ravi Gunasekaran <r-gunasekaran@ti.com> - Roger Quadros <rogerq@kernel.org> description: |+ diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml index 4aa521f1be..e564f20d8f 100644 --- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml +++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml @@ -44,6 +44,7 @@ properties: - brcm,bcm4366-fmac - cypress,cyw4373-fmac - cypress,cyw43012-fmac + - infineon,cyw43439-fmac - const: brcm,bcm4329-fmac - enum: - brcm,bcm4329-fmac diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml index 9b3ef4bc37..5c4498b762 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml @@ -73,6 +73,12 @@ properties: - sky85703-11 - sky85803 + firmware-name: + maxItems: 1 + description: + If present, a board or platform specific string used to lookup firmware + files for the device. + wifi-firmware: type: object additionalProperties: false diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml index 672282cdfc..a2d55bf4c7 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml @@ -59,6 +59,8 @@ properties: minItems: 1 maxItems: 2 + ieee80211-freq-limit: true + wifi-firmware: type: object description: | @@ -88,6 +90,7 @@ required: additionalProperties: false allOf: + - $ref: ieee80211.yaml# - if: properties: compatible: |