diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pci/layerscape-pci.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/pci/layerscape-pci.txt | 79 |
1 files changed, 79 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt new file mode 100644 index 0000000000..ee8a4791a7 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt @@ -0,0 +1,79 @@ +Freescale Layerscape PCIe controller + +This PCIe host controller is based on the Synopsys DesignWare PCIe IP +and thus inherits all the common properties defined in snps,dw-pcie.yaml. + +This controller derives its clocks from the Reset Configuration Word (RCW) +which is used to describe the PLL settings at the time of chip-reset. + +Also as per the available Reference Manuals, there is no specific 'version' +register available in the Freescale PCIe controller register set, +which can allow determining the underlying DesignWare PCIe controller version +information. + +Required properties: +- compatible: should contain the platform identifier such as: + RC mode: + "fsl,ls1021a-pcie" + "fsl,ls2080a-pcie", "fsl,ls2085a-pcie" + "fsl,ls2088a-pcie" + "fsl,ls1088a-pcie" + "fsl,ls1046a-pcie" + "fsl,ls1043a-pcie" + "fsl,ls1012a-pcie" + "fsl,ls1028a-pcie" + EP mode: + "fsl,ls1028a-pcie-ep", "fsl,ls-pcie-ep" + "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep" + "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep" + "fsl,ls2088a-pcie-ep", "fsl,ls-pcie-ep" + "fsl,lx2160ar2-pcie-ep", "fsl,ls-pcie-ep" +- reg: base addresses and lengths of the PCIe controller register blocks. +- interrupts: A list of interrupt outputs of the controller. Must contain an + entry for each entry in the interrupt-names property. +- interrupt-names: It could include the following entries: + "aer": Used for interrupt line which reports AER events when + non MSI/MSI-X/INTx mode is used + "pme": Used for interrupt line which reports PME events when + non MSI/MSI-X/INTx mode is used + "intr": Used for SoCs(like ls2080a, lx2160a, ls2080a, ls2088a, ls1088a) + which has a single interrupt line for miscellaneous controller + events(could include AER and PME events). +- fsl,pcie-scfg: Must include two entries. + The first entry must be a link to the SCFG device node + The second entry is the physical PCIe controller index starting from '0'. + This is used to get SCFG PEXN registers +- dma-coherent: Indicates that the hardware IP block can ensure the coherency + of the data transferred from/to the IP block. This can avoid the software + cache flush/invalid actions, and improve the performance significantly. + +Optional properties: +- big-endian: If the PEX_LUT and PF register block is in big-endian, specify + this property. + +Example: + + pcie@3400000 { + compatible = "fsl,ls1088a-pcie"; + reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ + <0x20 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ + interrupt-names = "aer"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + num-viewport = <256>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>, + <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>; + iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */ + }; |