summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/devicetree/bindings/pci/mediatek-pcie.txt289
1 files changed, 289 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
new file mode 100644
index 0000000000..6842275222
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
@@ -0,0 +1,289 @@
+MediaTek Gen2 PCIe controller
+
+Required properties:
+- compatible: Should contain one of the following strings:
+ "mediatek,mt2701-pcie"
+ "mediatek,mt2712-pcie"
+ "mediatek,mt7622-pcie"
+ "mediatek,mt7623-pcie"
+ "mediatek,mt7629-pcie"
+ "airoha,en7523-pcie"
+- device_type: Must be "pci"
+- reg: Base addresses and lengths of the root ports.
+- reg-names: Names of the above areas to use during resource lookup.
+- #address-cells: Address representation for root ports (must be 3)
+- #size-cells: Size representation for root ports (must be 2)
+- clocks: Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names:
+ Mandatory entries:
+ - sys_ckN :transaction layer and data link layer clock
+ Required entries for MT2701/MT7623:
+ - free_ck :for reference clock of PCIe subsys
+ Required entries for MT2712/MT7622:
+ - ahb_ckN :AHB slave interface operating clock for CSR access and RC
+ initiated MMIO access
+ Required entries for MT7622:
+ - axi_ckN :application layer MMIO channel operating clock
+ - aux_ckN :pe2_mac_bridge and pe2_mac_core operating clock when
+ pcie_mac_ck/pcie_pipe_ck is turned off
+ - obff_ckN :OBFF functional block operating clock
+ - pipe_ckN :LTSSM and PHY/MAC layer operating clock
+ where N starting from 0 to one less than the number of root ports.
+- phys: List of PHY specifiers (used by generic PHY framework).
+- phy-names : Must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the
+ number of PHYs as specified in *phys* property.
+- power-domains: A phandle and power domain specifier pair to the power domain
+ which is responsible for collapsing and restoring power to the peripheral.
+- bus-range: Range of bus numbers associated with this controller.
+- ranges: Ranges for the PCI memory and I/O regions.
+
+Required properties for MT7623/MT2701:
+- #interrupt-cells: Size representation for interrupts (must be 1)
+- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
+ Please refer to the standard PCI bus binding document for a more detailed
+ explanation.
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names: Must be "pcie-rst0", "pcie-rst1", "pcie-rstN".. based on the
+ number of root ports.
+
+Required properties for MT2712/MT7622/MT7629:
+-interrupts: A list of interrupt outputs of the controller, must have one
+ entry for each PCIe port
+- interrupt-names: Must include the following entries:
+ - "pcie_irq": The interrupt that is asserted when an MSI/INTX is received
+- linux,pci-domain: PCI domain ID. Should be unique for each host controller
+
+In addition, the device tree node must have sub-nodes describing each
+PCIe port interface, having the following mandatory properties:
+
+Required properties:
+- device_type: Must be "pci"
+- reg: Only the first four bytes are used to refer to the correct bus number
+ and device number.
+- #address-cells: Must be 3
+- #size-cells: Must be 2
+- #interrupt-cells: Must be 1
+- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
+ Please refer to the standard PCI bus binding document for a more detailed
+ explanation.
+- ranges: Sub-ranges distributed from the PCIe controller node. An empty
+ property is sufficient.
+
+Examples for MT7623:
+
+ hifsys: syscon@1a000000 {
+ compatible = "mediatek,mt7623-hifsys",
+ "mediatek,mt2701-hifsys",
+ "syscon";
+ reg = <0 0x1a000000 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ pcie: pcie@1a140000 {
+ compatible = "mediatek,mt7623-pcie";
+ device_type = "pci";
+ reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */
+ <0 0x1a142000 0 0x1000>, /* Port0 registers */
+ <0 0x1a143000 0 0x1000>, /* Port1 registers */
+ <0 0x1a144000 0 0x1000>; /* Port2 registers */
+ reg-names = "subsys", "port0", "port1", "port2";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 0>;
+ interrupt-map = <0x0000 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>,
+ <0x0800 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>,
+ <0x1000 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
+ <&hifsys CLK_HIFSYS_PCIE0>,
+ <&hifsys CLK_HIFSYS_PCIE1>,
+ <&hifsys CLK_HIFSYS_PCIE2>;
+ clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2";
+ resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>,
+ <&hifsys MT2701_HIFSYS_PCIE1_RST>,
+ <&hifsys MT2701_HIFSYS_PCIE2_RST>;
+ reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2";
+ phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>,
+ <&pcie2_phy PHY_TYPE_PCIE>;
+ phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+ bus-range = <0x00 0xff>;
+ ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000 /* I/O space */
+ 0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>; /* memory space */
+
+ pcie@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>;
+ ranges;
+ };
+
+ pcie@1,0 {
+ reg = <0x0800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+ ranges;
+ };
+
+ pcie@2,0 {
+ reg = <0x1000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+ ranges;
+ };
+ };
+
+Examples for MT2712:
+
+ pcie1: pcie@112ff000 {
+ compatible = "mediatek,mt2712-pcie";
+ device_type = "pci";
+ reg = <0 0x112ff000 0 0x1000>;
+ reg-names = "port1";
+ linux,pci-domain = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pcie_irq";
+ clocks = <&topckgen CLK_TOP_PE2_MAC_P1_SEL>,
+ <&pericfg CLK_PERI_PCIE1>;
+ clock-names = "sys_ck1", "ahb_ck1";
+ phys = <&u3port1 PHY_TYPE_PCIE>;
+ phy-names = "pcie-phy1";
+ bus-range = <0x00 0xff>;
+ ranges = <0x82000000 0 0x11400000 0x0 0x11400000 0 0x300000>;
+ status = "disabled";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+ <0 0 0 2 &pcie_intc1 1>,
+ <0 0 0 3 &pcie_intc1 2>,
+ <0 0 0 4 &pcie_intc1 3>;
+ pcie_intc1: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ pcie0: pcie@11700000 {
+ compatible = "mediatek,mt2712-pcie";
+ device_type = "pci";
+ reg = <0 0x11700000 0 0x1000>;
+ reg-names = "port0";
+ linux,pci-domain = <0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pcie_irq";
+ clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>,
+ <&pericfg CLK_PERI_PCIE0>;
+ clock-names = "sys_ck0", "ahb_ck0";
+ phys = <&u3port0 PHY_TYPE_PCIE>;
+ phy-names = "pcie-phy0";
+ bus-range = <0x00 0xff>;
+ ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>;
+ status = "disabled";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+ <0 0 0 2 &pcie_intc0 1>,
+ <0 0 0 3 &pcie_intc0 2>,
+ <0 0 0 4 &pcie_intc0 3>;
+ pcie_intc0: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
+Examples for MT7622:
+
+ pcie0: pcie@1a143000 {
+ compatible = "mediatek,mt7622-pcie";
+ device_type = "pci";
+ reg = <0 0x1a143000 0 0x1000>;
+ reg-names = "port0";
+ linux,pci-domain = <0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "pcie_irq";
+ clocks = <&pciesys CLK_PCIE_P0_MAC_EN>,
+ <&pciesys CLK_PCIE_P0_AHB_EN>,
+ <&pciesys CLK_PCIE_P0_AUX_EN>,
+ <&pciesys CLK_PCIE_P0_AXI_EN>,
+ <&pciesys CLK_PCIE_P0_OBFF_EN>,
+ <&pciesys CLK_PCIE_P0_PIPE_EN>;
+ clock-names = "sys_ck0", "ahb_ck0", "aux_ck0",
+ "axi_ck0", "obff_ck0", "pipe_ck0";
+
+ power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+ bus-range = <0x00 0xff>;
+ ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x8000000>;
+ status = "disabled";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+ <0 0 0 2 &pcie_intc0 1>,
+ <0 0 0 3 &pcie_intc0 2>,
+ <0 0 0 4 &pcie_intc0 3>;
+ pcie_intc0: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ pcie1: pcie@1a145000 {
+ compatible = "mediatek,mt7622-pcie";
+ device_type = "pci";
+ reg = <0 0x1a145000 0 0x1000>;
+ reg-names = "port1";
+ linux,pci-domain = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "pcie_irq";
+ clocks = <&pciesys CLK_PCIE_P1_MAC_EN>,
+ /* designer has connect RC1 with p0_ahb clock */
+ <&pciesys CLK_PCIE_P0_AHB_EN>,
+ <&pciesys CLK_PCIE_P1_AUX_EN>,
+ <&pciesys CLK_PCIE_P1_AXI_EN>,
+ <&pciesys CLK_PCIE_P1_OBFF_EN>,
+ <&pciesys CLK_PCIE_P1_PIPE_EN>;
+ clock-names = "sys_ck1", "ahb_ck1", "aux_ck1",
+ "axi_ck1", "obff_ck1", "pipe_ck1";
+
+ power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+ bus-range = <0x00 0xff>;
+ ranges = <0x82000000 0 0x28000000 0x0 0x28000000 0 0x8000000>;
+ status = "disabled";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+ <0 0 0 2 &pcie_intc1 1>,
+ <0 0 0 3 &pcie_intc1 2>,
+ <0 0 0 4 &pcie_intc1 3>;
+ pcie_intc1: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };