diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml | 194 |
1 files changed, 194 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml new file mode 100644 index 0000000000..8fc2151691 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml @@ -0,0 +1,194 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/snps,dw-pcie-ep.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DesignWare PCIe endpoint interface + +maintainers: + - Jingoo Han <jingoohan1@gmail.com> + - Gustavo Pimentel <gustavo.pimentel@synopsys.com> + +description: | + Synopsys DesignWare PCIe host controller endpoint + +# Please create a separate DT-schema for your DWC PCIe Endpoint controller +# and make sure it's assigned with the vendor-specific compatible string. +select: + properties: + compatible: + const: snps,dw-pcie-ep + required: + - compatible + +allOf: + - $ref: /schemas/pci/pci-ep.yaml# + - $ref: /schemas/pci/snps,dw-pcie-common.yaml# + +properties: + reg: + description: + DBI, DBI2 reg-spaces and outbound memory window are required for the + normal controller functioning. iATU memory IO region is also required + if the space is unrolled (IP-core version >= 4.80a). + minItems: 2 + maxItems: 5 + + reg-names: + minItems: 2 + maxItems: 5 + items: + oneOf: + - description: + Basic DWC PCIe controller configuration-space accessible over + the DBI interface. This memory space is either activated with + CDM/ELBI = 0 and CS2 = 0 or is a contiguous memory region + with all spaces. Note iATU/eDMA CSRs are indirectly accessible + via the PL viewports on the DWC PCIe controllers older than + v4.80a. + const: dbi + - description: + Shadow DWC PCIe config-space registers. This space is selected + by setting CDM/ELBI = 0 and CS2 = 1. This is an intermix of + the PCI-SIG PCIe CFG-space with the shadow registers for some + PCI Header space, PCI Standard and Extended Structures. It's + mainly relevant for the end-point controller configuration, + but still there are some shadow registers available for the + Root Port mode too. + const: dbi2 + - description: + External Local Bus registers. It's an application-dependent + registers normally defined by the platform engineers. The space + can be selected by setting CDM/ELBI = 1 and CS2 = 0 wires or can + be accessed over some platform-specific means (for instance + as a part of a system controller). + enum: [ elbi, app ] + - description: + iATU/eDMA registers common for all device functions. It's an + unrolled memory space with the internal Address Translation + Unit and Enhanced DMA, which is selected by setting CDM/ELBI = 1 + and CS2 = 1. For IP-core releases prior v4.80a, these registers + have been programmed via an indirect addressing scheme using a + set of viewport CSRs mapped into the PL space. Note iATU is + normally mapped to the 0x0 address of this region, while eDMA + is available at 0x80000 base address. + const: atu + - description: + Platform-specific eDMA registers. Some platforms may have eDMA + CSRs mapped in a non-standard base address. The registers offset + can be changed or the MS/LS-bits of the address can be attached + in an additional RTL block before the MEM-IO transactions reach + the DW PCIe slave interface. + const: dma + - description: + PHY/PCS configuration registers. Some platforms can have the + PCS and PHY CSRs accessible over a dedicated memory mapped + region, but mainly these registers are indirectly accessible + either by means of the embedded PHY viewport schema or by some + platform-specific method. + const: phy + - description: + Outbound iATU-capable memory-region which will be used to + generate various application-specific traffic on the PCIe bus + hierarchy. It's usage scenario depends on the endpoint + functionality, for instance it can be used to create MSI(X) + messages. + const: addr_space + - description: + Vendor-specific CSR names. Consider using the generic names above + for new bindings. + oneOf: + - description: See native 'elbi/app' CSR region for details. + enum: [ link, appl ] + - description: See native 'atu' CSR region for details. + enum: [ atu_dma ] + allOf: + - contains: + const: dbi + - contains: + const: addr_space + + interrupts: + description: + There is no mandatory IRQ signals for the normal controller functioning, + but in addition to the native set the platforms may have a link- or + PM-related IRQs specified. + minItems: 1 + maxItems: 20 + + interrupt-names: + minItems: 1 + maxItems: 20 + items: + oneOf: + - description: + Controller request to read or write virtual product data + from/to the VPD capability registers. + const: vpd + - description: + Link Equalization Request flag is set in the Link Status 2 + register (applicable if the corresponding IRQ is enabled in + the Link Control 3 register). + const: l_eq + - description: + Indicates that the eDMA Tx/Rx transfer is complete or that an + error has occurred on the corresponding channel. eDMA can have + eight Tx (Write) and Rx (Read) eDMA channels thus supporting up + to 16 IRQ signals all together. Write eDMA channels shall go + first in the ordered row as per default edma_int[*] bus setup. + pattern: '^dma([0-9]|1[0-5])?$' + - description: + PCIe protocol correctable error or a Data Path protection + correctable error is detected by the automotive/safety + feature. + const: sft_ce + - description: + Indicates that the internal safety mechanism has detected an + uncorrectable error. + const: sft_ue + - description: + Application-specific IRQ raised depending on the vendor-specific + events basis. + const: app + - description: + Vendor-specific IRQ names. Consider using the generic names above + for new bindings. + oneOf: + - description: See native "app" IRQ for details + enum: [ intr ] + + max-functions: + maximum: 32 + +required: + - compatible + - reg + - reg-names + +additionalProperties: true + +examples: + - | + pcie-ep@dfd00000 { + compatible = "snps,dw-pcie-ep"; + reg = <0xdfc00000 0x0001000>, /* IP registers 1 */ + <0xdfc01000 0x0001000>, /* IP registers 2 */ + <0xd0000000 0x2000000>; /* Configuration space */ + reg-names = "dbi", "dbi2", "addr_space"; + + interrupts = <23>, <24>; + interrupt-names = "dma0", "dma1"; + + clocks = <&sys_clk 12>, <&sys_clk 24>; + clock-names = "dbi", "ref"; + + resets = <&sys_rst 12>, <&sys_rst 24>; + reset-names = "dbi", "phy"; + + phys = <&pcie_phy0>, <&pcie_phy1>, <&pcie_phy2>, <&pcie_phy3>; + phy-names = "pcie0", "pcie1", "pcie2", "pcie3"; + + max-link-speed = <3>; + max-functions = /bits/ 8 <4>; + }; |