summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/pci
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/pci')
-rw-r--r--Documentation/devicetree/bindings/pci/83xx-512x-pci.txt39
-rw-r--r--Documentation/devicetree/bindings/pci/aardvark-pci.txt59
-rw-r--r--Documentation/devicetree/bindings/pci/altera-pcie-msi.txt27
-rw-r--r--Documentation/devicetree/bindings/pci/altera-pcie.txt50
-rw-r--r--Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml134
-rw-r--r--Documentation/devicetree/bindings/pci/apple,pcie.yaml175
-rw-r--r--Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt50
-rw-r--r--Documentation/devicetree/bindings/pci/baikal,bt1-pcie.yaml168
-rw-r--r--Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml173
-rw-r--r--Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml185
-rw-r--r--Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml50
-rw-r--r--Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml75
-rw-r--r--Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml24
-rw-r--r--Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml37
-rw-r--r--Documentation/devicetree/bindings/pci/cdns-pcie.yaml25
-rw-r--r--Documentation/devicetree/bindings/pci/faraday,ftpci100.yaml174
-rw-r--r--Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml270
-rw-r--r--Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml123
-rw-r--r--Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml190
-rw-r--r--Documentation/devicetree/bindings/pci/fsl,pci.txt27
-rw-r--r--Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml180
-rw-r--r--Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt69
-rw-r--r--Documentation/devicetree/bindings/pci/host-generic-pci.yaml177
-rw-r--r--Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml100
-rw-r--r--Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml69
-rw-r--r--Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml97
-rw-r--r--Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml117
-rw-r--r--Documentation/devicetree/bindings/pci/layerscape-pci.txt79
-rw-r--r--Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt52
-rw-r--r--Documentation/devicetree/bindings/pci/loongson.yaml63
-rw-r--r--Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml145
-rw-r--r--Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml39
-rw-r--r--Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml242
-rw-r--r--Documentation/devicetree/bindings/pci/mediatek-pcie.txt289
-rw-r--r--Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml140
-rw-r--r--Documentation/devicetree/bindings/pci/mobiveil-pcie.txt72
-rw-r--r--Documentation/devicetree/bindings/pci/mvebu-pci.txt310
-rw-r--r--Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml319
-rw-r--r--Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml380
-rw-r--r--Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt670
-rw-r--r--Documentation/devicetree/bindings/pci/pci-armada8k.txt48
-rw-r--r--Documentation/devicetree/bindings/pci/pci-ep.yaml47
-rw-r--r--Documentation/devicetree/bindings/pci/pci-iommu.txt171
-rw-r--r--Documentation/devicetree/bindings/pci/pci-msi.txt220
-rw-r--r--Documentation/devicetree/bindings/pci/pci.txt84
-rw-r--r--Documentation/devicetree/bindings/pci/pcie-al.txt46
-rw-r--r--Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml223
-rw-r--r--Documentation/devicetree/bindings/pci/qcom,pcie.yaml981
-rw-r--r--Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt187
-rw-r--r--Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml93
-rw-r--r--Documentation/devicetree/bindings/pci/rcar-pci-host.yaml125
-rw-r--r--Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml186
-rw-r--r--Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-common.yaml69
-rw-r--r--Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml70
-rw-r--r--Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml132
-rw-r--r--Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml215
-rw-r--r--Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml119
-rw-r--r--Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml120
-rw-r--r--Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml266
-rw-r--r--Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml194
-rw-r--r--Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml242
-rw-r--r--Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml130
-rw-r--r--Documentation/devicetree/bindings/pci/socionext,uniphier-pcie.yaml117
-rw-r--r--Documentation/devicetree/bindings/pci/spear13xx-pcie.txt14
-rw-r--r--Documentation/devicetree/bindings/pci/ti,am65-pci-ep.yaml76
-rw-r--r--Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml106
-rw-r--r--Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml110
-rw-r--r--Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml155
-rw-r--r--Documentation/devicetree/bindings/pci/ti-pci.txt102
-rw-r--r--Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml111
-rw-r--r--Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt76
-rw-r--r--Documentation/devicetree/bindings/pci/versatile.yaml94
-rw-r--r--Documentation/devicetree/bindings/pci/xgene-pci-msi.txt68
-rw-r--r--Documentation/devicetree/bindings/pci/xgene-pci.txt50
-rw-r--r--Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml134
-rw-r--r--Documentation/devicetree/bindings/pci/xlnx,axi-pcie-host.yaml88
-rw-r--r--Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml149
77 files changed, 11082 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt b/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt
new file mode 100644
index 0000000000..3abeecf498
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt
@@ -0,0 +1,39 @@
+* Freescale 83xx and 512x PCI bridges
+
+Freescale 83xx and 512x SOCs include the same PCI bridge core.
+
+83xx/512x specific notes:
+- reg: should contain two address length tuples
+ The first is for the internal PCI bridge registers
+ The second is for the PCI config space access registers
+
+Example (MPC8313ERDB)
+ pci0: pci@e0008500 {
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x0E -mini PCI */
+ 0x7000 0x0 0x0 0x1 &ipic 18 0x8
+ 0x7000 0x0 0x0 0x2 &ipic 18 0x8
+ 0x7000 0x0 0x0 0x3 &ipic 18 0x8
+ 0x7000 0x0 0x0 0x4 &ipic 18 0x8
+
+ /* IDSEL 0x0F - PCI slot */
+ 0x7800 0x0 0x0 0x1 &ipic 17 0x8
+ 0x7800 0x0 0x0 0x2 &ipic 18 0x8
+ 0x7800 0x0 0x0 0x3 &ipic 17 0x8
+ 0x7800 0x0 0x0 0x4 &ipic 18 0x8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <66 0x8>;
+ bus-range = <0x0 0x0>;
+ ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+ 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+ 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+ clock-frequency = <66666666>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xe0008500 0x100 /* internal registers */
+ 0xe0008300 0x8>; /* config space access registers */
+ compatible = "fsl,mpc8349-pci";
+ device_type = "pci";
+ };
diff --git a/Documentation/devicetree/bindings/pci/aardvark-pci.txt b/Documentation/devicetree/bindings/pci/aardvark-pci.txt
new file mode 100644
index 0000000000..2b8ca920a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/aardvark-pci.txt
@@ -0,0 +1,59 @@
+Aardvark PCIe controller
+
+This PCIe controller is used on the Marvell Armada 3700 ARM64 SoC.
+
+The Device Tree node describing an Aardvark PCIe controller must
+contain the following properties:
+
+ - compatible: Should be "marvell,armada-3700-pcie"
+ - reg: range of registers for the PCIe controller
+ - interrupts: the interrupt line of the PCIe controller
+ - #address-cells: set to <3>
+ - #size-cells: set to <2>
+ - device_type: set to "pci"
+ - ranges: ranges for the PCI memory and I/O regions
+ - #interrupt-cells: set to <1>
+ - msi-controller: indicates that the PCIe controller can itself
+ handle MSI interrupts
+ - msi-parent: pointer to the MSI controller to be used
+ - interrupt-map-mask and interrupt-map: standard PCI properties to
+ define the mapping of the PCIe interface to interrupt numbers.
+ - bus-range: PCI bus numbers covered
+ - phys: the PCIe PHY handle
+ - max-link-speed: see pci.txt
+ - reset-gpios: see pci.txt
+
+In addition, the Device Tree describing an Aardvark PCIe controller
+must include a sub-node that describes the legacy interrupt controller
+built into the PCIe controller. This sub-node must have the following
+properties:
+
+ - interrupt-controller
+ - #interrupt-cells: set to <1>
+
+Example:
+
+ pcie0: pcie@d0070000 {
+ compatible = "marvell,armada-3700-pcie";
+ device_type = "pci";
+ reg = <0 0xd0070000 0 0x20000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x00 0xff>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ msi-controller;
+ msi-parent = <&pcie0>;
+ ranges = <0x82000000 0 0xe8000000 0 0xe8000000 0 0x1000000 /* Port 0 MEM */
+ 0x81000000 0 0xe9000000 0 0xe9000000 0 0x10000>; /* Port 0 IO*/
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc 0>,
+ <0 0 0 2 &pcie_intc 1>,
+ <0 0 0 3 &pcie_intc 2>,
+ <0 0 0 4 &pcie_intc 3>;
+ phys = <&comphy1 0>;
+ pcie_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt b/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt
new file mode 100644
index 0000000000..9514c327d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/altera-pcie-msi.txt
@@ -0,0 +1,27 @@
+* Altera PCIe MSI controller
+
+Required properties:
+- compatible: should contain "altr,msi-1.0"
+- reg: specifies the physical base address of the controller and
+ the length of the memory mapped region.
+- reg-names: must include the following entries:
+ "csr": CSR registers
+ "vector_slave": vectors slave port region
+- interrupts: specifies the interrupt source of the parent interrupt
+ controller. The format of the interrupt specifier depends on the
+ parent interrupt controller.
+- num-vectors: number of vectors, range 1 to 32.
+- msi-controller: indicates that this is MSI controller node
+
+
+Example
+msi0: msi@0xFF200000 {
+ compatible = "altr,msi-1.0";
+ reg = <0xFF200000 0x00000010
+ 0xFF200010 0x00000080>;
+ reg-names = "csr", "vector_slave";
+ interrupt-parent = <&hps_0_arm_gic_0>;
+ interrupts = <0 42 4>;
+ msi-controller;
+ num-vectors = <32>;
+};
diff --git a/Documentation/devicetree/bindings/pci/altera-pcie.txt b/Documentation/devicetree/bindings/pci/altera-pcie.txt
new file mode 100644
index 0000000000..816b244a22
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/altera-pcie.txt
@@ -0,0 +1,50 @@
+* Altera PCIe controller
+
+Required properties:
+- compatible : should contain "altr,pcie-root-port-1.0" or "altr,pcie-root-port-2.0"
+- reg: a list of physical base address and length for TXS and CRA.
+ For "altr,pcie-root-port-2.0", additional HIP base address and length.
+- reg-names: must include the following entries:
+ "Txs": TX slave port region
+ "Cra": Control register access region
+ "Hip": Hard IP region (if "altr,pcie-root-port-2.0")
+- interrupts: specifies the interrupt source of the parent interrupt
+ controller. The format of the interrupt specifier depends
+ on the parent interrupt controller.
+- device_type: must be "pci"
+- #address-cells: set to <3>
+- #size-cells: set to <2>
+- #interrupt-cells: set to <1>
+- ranges: describes the translation of addresses for root ports and
+ standard PCI regions.
+- interrupt-map-mask and interrupt-map: standard PCI properties to define the
+ mapping of the PCIe interface to interrupt numbers.
+
+Optional properties:
+- msi-parent: Link to the hardware entity that serves as the MSI controller
+ for this PCIe controller.
+- bus-range: PCI bus numbers covered
+
+Example
+ pcie_0: pcie@c00000000 {
+ compatible = "altr,pcie-root-port-1.0";
+ reg = <0xc0000000 0x20000000>,
+ <0xff220000 0x00004000>;
+ reg-names = "Txs", "Cra";
+ interrupt-parent = <&hps_0_arm_gic_0>;
+ interrupts = <0 40 4>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ bus-range = <0x0 0xFF>;
+ device_type = "pci";
+ msi-parent = <&msi_to_gic_gen_0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_0 1>,
+ <0 0 0 2 &pcie_0 2>,
+ <0 0 0 3 &pcie_0 3>,
+ <0 0 0 4 &pcie_0 4>;
+ ranges = <0x82000000 0x00000000 0x00000000 0xc0000000 0x00000000 0x10000000
+ 0x82000000 0x00000000 0x10000000 0xd0000000 0x00000000 0x10000000>;
+ };
diff --git a/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml b/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml
new file mode 100644
index 0000000000..a5bd90bc07
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/amlogic,axg-pcie.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/amlogic,axg-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson AXG DWC PCIe SoC controller
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+description:
+ Amlogic Meson PCIe host controller is based on the Synopsys DesignWare PCI core.
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: /schemas/pci/snps,dw-pcie-common.yaml#
+
+# We need a select here so we don't match all nodes with 'snps,dw-pcie'
+select:
+ properties:
+ compatible:
+ enum:
+ - amlogic,axg-pcie
+ - amlogic,g12a-pcie
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - amlogic,axg-pcie
+ - amlogic,g12a-pcie
+ - const: snps,dw-pcie
+
+ reg:
+ items:
+ - description: External local bus interface registers
+ - description: Meson designed configuration registers
+ - description: PCIe configuration space
+
+ reg-names:
+ items:
+ - const: elbi
+ - const: cfg
+ - const: config
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: PCIe GEN 100M PLL clock
+ - description: PCIe RC clock gate
+ - description: PCIe PHY clock
+
+ clock-names:
+ items:
+ - const: pclk
+ - const: port
+ - const: general
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ const: pcie
+
+ resets:
+ items:
+ - description: Port Reset
+ - description: Shared APB reset
+
+ reset-names:
+ items:
+ - const: port
+ - const: apb
+
+ num-lanes:
+ const: 1
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - clock
+ - clock-names
+ - "#address-cells"
+ - "#size-cells"
+ - "#interrupt-cells"
+ - interrupt-map
+ - interrupt-map-mask
+ - ranges
+ - bus-range
+ - device_type
+ - num-lanes
+ - phys
+ - phy-names
+ - resets
+ - reset-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ pcie: pcie@f9800000 {
+ compatible = "amlogic,axg-pcie", "snps,dw-pcie";
+ reg = <0xf9800000 0x400000>, <0xff646000 0x2000>, <0xf9f00000 0x100000>;
+ reg-names = "elbi", "cfg", "config";
+ interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&pclk>, <&clk_port>, <&clk_phy>;
+ clock-names = "pclk", "port", "general";
+ resets = <&reset_pcie_port>, <&reset_pcie_apb>;
+ reset-names = "port", "apb";
+ phys = <&pcie_phy>;
+ phy-names = "pcie";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
+ bus-range = <0x0 0xff>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ num-lanes = <1>;
+ ranges = <0x82000000 0 0 0xf9c00000 0 0x00300000>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/pci/apple,pcie.yaml b/Documentation/devicetree/bindings/pci/apple,pcie.yaml
new file mode 100644
index 0000000000..215ff9a9c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/apple,pcie.yaml
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/apple,pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple PCIe host controller
+
+maintainers:
+ - Mark Kettenis <kettenis@openbsd.org>
+
+description: |
+ The Apple PCIe host controller is a PCIe host controller with
+ multiple root ports present in Apple ARM SoC platforms, including
+ various iPhone and iPad devices and the "Apple Silicon" Macs.
+ The controller incorporates Synopsys DesigWare PCIe logic to
+ implements its root ports. But the ATU found on most DesignWare
+ PCIe host bridges is absent.
+
+ All root ports share a single ECAM space, but separate GPIOs are
+ used to take the PCI devices on those ports out of reset. Therefore
+ the standard "reset-gpios" and "max-link-speed" properties appear on
+ the child nodes that represent the PCI bridges that correspond to
+ the individual root ports.
+
+ MSIs are handled by the PCIe controller and translated into regular
+ interrupts. A range of 32 MSIs is provided. These 32 MSIs can be
+ distributed over the root ports as the OS sees fit by programming
+ the PCIe controller's port registers.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - apple,t8103-pcie
+ - apple,t8112-pcie
+ - apple,t6000-pcie
+ - const: apple,pcie
+
+ reg:
+ minItems: 3
+ maxItems: 6
+
+ reg-names:
+ minItems: 3
+ items:
+ - const: config
+ - const: rc
+ - const: port0
+ - const: port1
+ - const: port2
+ - const: port3
+
+ ranges:
+ minItems: 2
+ maxItems: 2
+
+ interrupts:
+ description:
+ Interrupt specifiers, one for each root port.
+ minItems: 1
+ maxItems: 4
+
+ msi-parent: true
+
+ msi-ranges:
+ maxItems: 1
+
+ iommu-map: true
+ iommu-map-mask: true
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - bus-range
+ - interrupts
+ - msi-controller
+ - msi-parent
+ - msi-ranges
+
+unevaluatedProperties: false
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: apple,t8103-pcie
+ then:
+ properties:
+ reg:
+ maxItems: 5
+ interrupts:
+ maxItems: 3
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/apple-aic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie0: pcie@690000000 {
+ compatible = "apple,t8103-pcie", "apple,pcie";
+ device_type = "pci";
+
+ reg = <0x6 0x90000000 0x0 0x1000000>,
+ <0x6 0x80000000 0x0 0x100000>,
+ <0x6 0x81000000 0x0 0x4000>,
+ <0x6 0x82000000 0x0 0x4000>,
+ <0x6 0x83000000 0x0 0x4000>;
+ reg-names = "config", "rc", "port0", "port1", "port2";
+
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 695 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 698 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 701 IRQ_TYPE_LEVEL_HIGH>;
+
+ msi-controller;
+ msi-parent = <&pcie0>;
+ msi-ranges = <&aic AIC_IRQ 704 IRQ_TYPE_EDGE_RISING 32>;
+
+ iommu-map = <0x100 &dart0 1 1>,
+ <0x200 &dart1 1 1>,
+ <0x300 &dart2 1 1>;
+ iommu-map-mask = <0xff00>;
+
+ bus-range = <0 3>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x43000000 0x6 0xa0000000 0x6 0xa0000000 0x0 0x20000000>,
+ <0x02000000 0x0 0xc0000000 0x6 0xc0000000 0x0 0x40000000>;
+
+ power-domains = <&ps_apcie_gp>;
+ pinctrl-0 = <&pcie_pins>;
+ pinctrl-names = "default";
+
+ pci@0,0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ reset-gpios = <&pinctrl_ap 152 0>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
+
+ pci@1,0 {
+ device_type = "pci";
+ reg = <0x800 0x0 0x0 0x0 0x0>;
+ reset-gpios = <&pinctrl_ap 153 0>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
+
+ pci@2,0 {
+ device_type = "pci";
+ reg = <0x1000 0x0 0x0 0x0 0x0>;
+ reset-gpios = <&pinctrl_ap 33 0>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
new file mode 100644
index 0000000000..cc6dcdb676
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
@@ -0,0 +1,50 @@
+* Axis ARTPEC-6 PCIe interface
+
+This PCIe host controller is based on the Synopsys DesignWare PCIe IP
+and thus inherits all the common properties defined in snps,dw-pcie.yaml.
+
+Required properties:
+- compatible: "axis,artpec6-pcie", "snps,dw-pcie" for ARTPEC-6 in RC mode;
+ "axis,artpec6-pcie-ep", "snps,dw-pcie" for ARTPEC-6 in EP mode;
+ "axis,artpec7-pcie", "snps,dw-pcie" for ARTPEC-7 in RC mode;
+ "axis,artpec7-pcie-ep", "snps,dw-pcie" for ARTPEC-7 in EP mode;
+- reg: base addresses and lengths of the PCIe controller (DBI),
+ the PHY controller, and configuration address space.
+- reg-names: Must include the following entries:
+ - "dbi"
+ - "phy"
+ - "config"
+- interrupts: A list of interrupt outputs of the controller. Must contain an
+ entry for each entry in the interrupt-names property.
+- interrupt-names: Must include the following entries:
+ - "msi": The interrupt that is asserted when an MSI is received
+- axis,syscon-pcie: A phandle pointing to the ARTPEC-6 system controller,
+ used to enable and control the Synopsys IP.
+
+Example:
+
+ pcie@f8050000 {
+ compatible = "axis,artpec6-pcie", "snps,dw-pcie";
+ reg = <0xf8050000 0x2000
+ 0xf8040000 0x1000
+ 0xc0000000 0x2000>;
+ reg-names = "dbi", "phy", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ /* downstream I/O */
+ ranges = <0x81000000 0 0 0xc0002000 0 0x00010000
+ /* non-prefetchable memory */
+ 0x82000000 0 0xc0012000 0xc0012000 0 0x1ffee000>;
+ num-lanes = <2>;
+ bus-range = <0x00 0xff>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ axis,syscon-pcie = <&syscon>;
+ };
diff --git a/Documentation/devicetree/bindings/pci/baikal,bt1-pcie.yaml b/Documentation/devicetree/bindings/pci/baikal,bt1-pcie.yaml
new file mode 100644
index 0000000000..8eaa07ae97
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/baikal,bt1-pcie.yaml
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/baikal,bt1-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 PCIe Root Port Controller
+
+maintainers:
+ - Serge Semin <fancer.lancer@gmail.com>
+
+description:
+ Embedded into Baikal-T1 SoC Root Complex controller with a single port
+ activated. It's based on the DWC RC PCIe v4.60a IP-core, which is configured
+ to have just a single Root Port function and is capable of establishing the
+ link up to Gen.3 speed on x4 lanes. It doesn't have embedded clock and reset
+ control module, so the proper interface initialization is supposed to be
+ performed by software. There four in- and four outbound iATU regions
+ which can be used to emit all required TLP types on the PCIe bus.
+
+allOf:
+ - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+ compatible:
+ const: baikal,bt1-pcie
+
+ reg:
+ description:
+ DBI, DBI2 and at least 4KB outbound iATU-capable region for the
+ peripheral devices CFG-space access.
+ maxItems: 3
+
+ reg-names:
+ items:
+ - const: dbi
+ - const: dbi2
+ - const: config
+
+ interrupts:
+ description:
+ MSI, AER, PME, Hot-plug, Link Bandwidth Management, Link Equalization
+ request and eight Read/Write eDMA IRQ lines are available.
+ maxItems: 14
+
+ interrupt-names:
+ items:
+ - const: dma0
+ - const: dma1
+ - const: dma2
+ - const: dma3
+ - const: dma4
+ - const: dma5
+ - const: dma6
+ - const: dma7
+ - const: msi
+ - const: aer
+ - const: pme
+ - const: hp
+ - const: bw_mg
+ - const: l_eq
+
+ clocks:
+ description:
+ DBI (attached to the APB bus), AXI-bus master and slave interfaces
+ are fed up by the dedicated application clocks. A common reference
+ clock signal is supposed to be attached to the corresponding Ref-pad
+ of the SoC. It will be redistributed amongst the controller core
+ sub-modules (pipe, core, aux, etc).
+ maxItems: 4
+
+ clock-names:
+ items:
+ - const: dbi
+ - const: mstr
+ - const: slv
+ - const: ref
+
+ resets:
+ description:
+ A comprehensive controller reset logic is supposed to be implemented
+ by software, so almost all the possible application and core reset
+ signals are exposed via the system CCU module.
+ maxItems: 9
+
+ reset-names:
+ items:
+ - const: mstr
+ - const: slv
+ - const: pwr
+ - const: hot
+ - const: phy
+ - const: core
+ - const: pipe
+ - const: sticky
+ - const: non-sticky
+
+ baikal,bt1-syscon:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to the Baikal-T1 System Controller DT node. It's required to
+ access some additional PM, Reset-related and LTSSM signals.
+
+ num-lanes:
+ maximum: 4
+
+ max-link-speed:
+ maximum: 3
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - interrupt-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/mips-gic.h>
+ #include <dt-bindings/gpio/gpio.h>
+
+ pcie@1f052000 {
+ compatible = "baikal,bt1-pcie";
+ device_type = "pci";
+ reg = <0x1f052000 0x1000>, <0x1f053000 0x1000>, <0x1bdbf000 0x1000>;
+ reg-names = "dbi", "dbi2", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x81000000 0 0x00000000 0x1bdb0000 0 0x00008000>,
+ <0x82000000 0 0x20000000 0x08000000 0 0x13db0000>;
+ bus-range = <0x0 0xff>;
+
+ interrupts = <GIC_SHARED 80 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 81 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 82 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 83 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 84 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 85 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 86 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 87 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 88 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 89 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 90 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 91 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 92 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 93 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "dma0", "dma1", "dma2", "dma3",
+ "dma4", "dma5", "dma6", "dma7",
+ "msi", "aer", "pme", "hp", "bw_mg",
+ "l_eq";
+
+ clocks = <&ccu_sys 1>, <&ccu_axi 6>, <&ccu_axi 7>, <&clk_pcie>;
+ clock-names = "dbi", "mstr", "slv", "ref";
+
+ resets = <&ccu_axi 6>, <&ccu_axi 7>, <&ccu_sys 7>, <&ccu_sys 10>,
+ <&ccu_sys 4>, <&ccu_sys 6>, <&ccu_sys 5>, <&ccu_sys 8>,
+ <&ccu_sys 9>;
+ reset-names = "mstr", "slv", "pwr", "hot", "phy", "core", "pipe",
+ "sticky", "non-sticky";
+
+ reset-gpios = <&port0 0 GPIO_ACTIVE_LOW>;
+
+ num-lanes = <4>;
+ max-link-speed = <3>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml
new file mode 100644
index 0000000000..0e07ab61a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.yaml
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/brcm,iproc-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom iProc PCIe controller with the platform bus interface
+
+maintainers:
+ - Ray Jui <ray.jui@broadcom.com>
+ - Scott Branden <scott.branden@broadcom.com>
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ # for the first generation of PAXB based controller, used in SoCs
+ # including NSP, Cygnus, NS2, and Pegasus
+ - brcm,iproc-pcie
+ # for the second generation of PAXB-based controllers, used in
+ # Stingray
+ - brcm,iproc-pcie-paxb-v2
+ # For the first generation of PAXC based controller, used in NS2
+ - brcm,iproc-pcie-paxc
+ # For the second generation of PAXC based controller, used in Stingray
+ - brcm,iproc-pcie-paxc-v2
+
+ reg:
+ maxItems: 1
+ description: >
+ Base address and length of the PCIe controller I/O register space
+
+ ranges:
+ minItems: 1
+ maxItems: 2
+ description: >
+ Ranges for the PCI memory and I/O regions
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ items:
+ - const: pcie-phy
+
+ dma-coherent: true
+
+ brcm,pcie-ob:
+ type: boolean
+ description: >
+ Some iProc SoCs do not have the outbound address mapping done by the
+ ASIC after power on reset. In this case, SW needs to configure it
+
+ brcm,pcie-ob-axi-offset:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: >
+ The offset from the AXI address to the internal address used by the
+ iProc PCIe core (not the PCIe address)
+
+ msi:
+ type: object
+ $ref: /schemas/interrupt-controller/msi-controller.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ compatible:
+ items:
+ - const: brcm,iproc-msi
+
+ interrupts:
+ maxItems: 4
+
+ brcm,pcie-msi-inten:
+ type: boolean
+ description:
+ Needs to be present for some older iProc platforms that require the
+ interrupt enable registers to be set explicitly to enable MSI
+
+ msi-parent: true
+
+dependencies:
+ brcm,pcie-ob-axi-offset: ["brcm,pcie-ob"]
+ brcm,pcie-msi-inten: [msi-controller]
+
+required:
+ - compatible
+ - reg
+ - ranges
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - brcm,iproc-pcie
+then:
+ required:
+ - interrupt-map
+ - interrupt-map-mask
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ gic: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ pcie@18012000 {
+ compatible = "brcm,iproc-pcie";
+ reg = <0x18012000 0x1000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
+
+ linux,pci-domain = <0>;
+
+ bus-range = <0x00 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0 0x28000000 0 0x00010000>,
+ <0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
+
+ phys = <&phy 0 5>;
+ phy-names = "pcie-phy";
+
+ brcm,pcie-ob;
+ brcm,pcie-ob-axi-offset = <0x00000000>;
+
+ msi-parent = <&msi0>;
+
+ /* iProc event queue based MSI */
+ msi0: msi {
+ compatible = "brcm,iproc-msi";
+ msi-controller;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>,
+ <GIC_SPI 97 IRQ_TYPE_NONE>,
+ <GIC_SPI 98 IRQ_TYPE_NONE>,
+ <GIC_SPI 99 IRQ_TYPE_NONE>;
+ };
+ };
+ - |
+ pcie@18013000 {
+ compatible = "brcm,iproc-pcie";
+ reg = <0x18013000 0x1000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
+
+ linux,pci-domain = <1>;
+
+ bus-range = <0x00 0xff>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0 0x48000000 0 0x00010000>,
+ <0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
+
+ phys = <&phy 1 6>;
+ phy-names = "pcie-phy";
+ };
diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
new file mode 100644
index 0000000000..7e15aae7d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
@@ -0,0 +1,185 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Brcmstb PCIe Host Controller
+
+maintainers:
+ - Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - brcm,bcm2711-pcie # The Raspberry Pi 4
+ - brcm,bcm4908-pcie
+ - brcm,bcm7211-pcie # Broadcom STB version of RPi4
+ - brcm,bcm7278-pcie # Broadcom 7278 Arm
+ - brcm,bcm7216-pcie # Broadcom 7216 Arm
+ - brcm,bcm7445-pcie # Broadcom 7445 Arm
+ - brcm,bcm7425-pcie # Broadcom 7425 MIPs
+ - brcm,bcm7435-pcie # Broadcom 7435 MIPs
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ items:
+ - description: PCIe host controller
+ - description: builtin MSI controller
+
+ interrupt-names:
+ minItems: 1
+ items:
+ - const: pcie
+ - const: msi
+
+ ranges:
+ minItems: 1
+ maxItems: 4
+
+ dma-ranges:
+ minItems: 1
+ maxItems: 6
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: sw_pcie
+
+ msi-controller:
+ description: Identifies the node as an MSI controller.
+
+ msi-parent:
+ description: MSI controller the device is capable of using.
+
+ brcm,enable-ssc:
+ description: Indicates usage of spread-spectrum clocking.
+ type: boolean
+
+ aspm-no-l0s: true
+
+ brcm,scb-sizes:
+ description: u64 giving the 64bit PCIe memory
+ viewport size of a memory controller. There may be up to
+ three controllers, and each size must be a power of two
+ with a size greater or equal to the amount of memory the
+ controller supports. Note that each memory controller
+ may have two component regions -- base and extended -- so
+ this information cannot be deduced from the dma-ranges.
+ $ref: /schemas/types.yaml#/definitions/uint64-array
+ items:
+ minItems: 1
+ maxItems: 3
+
+required:
+ - compatible
+ - reg
+ - ranges
+ - dma-ranges
+ - "#interrupt-cells"
+ - interrupts
+ - interrupt-names
+ - interrupt-map-mask
+ - interrupt-map
+ - msi-controller
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: brcm,bcm4908-pcie
+ then:
+ properties:
+ resets:
+ items:
+ - description: reset controller handling the PERST# signal
+
+ reset-names:
+ items:
+ - const: perst
+
+ required:
+ - resets
+ - reset-names
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: brcm,bcm7216-pcie
+ then:
+ properties:
+ resets:
+ items:
+ - description: phandle pointing to the RESCAL reset controller
+
+ reset-names:
+ items:
+ - const: rescal
+
+ required:
+ - resets
+ - reset-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ scb {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ pcie0: pcie@7d500000 {
+ compatible = "brcm,bcm2711-pcie";
+ reg = <0x0 0x7d500000 0x9310>;
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pcie", "msi";
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH
+ 0 0 0 2 &gicv2 GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH
+ 0 0 0 3 &gicv2 GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH
+ 0 0 0 4 &gicv2 GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+
+ msi-parent = <&pcie0>;
+ msi-controller;
+ ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
+ dma-ranges = <0x42000000 0x1 0x00000000 0x0 0x40000000 0x0 0x80000000>,
+ <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>;
+ brcm,enable-ssc;
+ brcm,scb-sizes = <0x0000000080000000 0x0000000080000000>;
+
+ /* PCIe bridge, Root Port */
+ pci@0,0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ compatible = "pciclass,0604";
+ device_type = "pci";
+ vpcie3v3-supply = <&vreg7>;
+ ranges;
+
+ /* PCIe endpoint */
+ pci-ep@0,0 {
+ assigned-addresses =
+ <0x82010000 0x0 0xf8000000 0x6 0x00000000 0x0 0x2000>;
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ compatible = "pci14e4,1688";
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml
new file mode 100644
index 0000000000..98651ab221
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/cdns,cdns-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence PCIe EP Controller
+
+maintainers:
+ - Tom Joseph <tjoseph@cadence.com>
+
+allOf:
+ - $ref: cdns-pcie-ep.yaml#
+
+properties:
+ compatible:
+ const: cdns,cdns-pcie-ep
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: reg
+ - const: mem
+
+required:
+ - reg
+ - reg-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie-ep@fc000000 {
+ compatible = "cdns,cdns-pcie-ep";
+ reg = <0x0 0xfc000000 0x0 0x01000000>,
+ <0x0 0x80000000 0x0 0x40000000>;
+ reg-names = "reg", "mem";
+ cdns,max-outbound-regions = <16>;
+ max-functions = /bits/ 8 <8>;
+ phys = <&pcie_phy0>;
+ phy-names = "pcie-phy";
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml
new file mode 100644
index 0000000000..bc3c48f60f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/cdns,cdns-pcie-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence PCIe host controller
+
+maintainers:
+ - Tom Joseph <tjoseph@cadence.com>
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: cdns-pcie-host.yaml#
+
+properties:
+ compatible:
+ const: cdns,cdns-pcie-host
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: reg
+ - const: cfg
+
+ msi-parent: true
+
+required:
+ - reg
+ - reg-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie@fb000000 {
+ compatible = "cdns,cdns-pcie-host";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x0 0xff>;
+ linux,pci-domain = <0>;
+ vendor-id = <0x17cd>;
+ device-id = <0x0200>;
+
+ reg = <0x0 0xfb000000 0x0 0x01000000>,
+ <0x0 0x41000000 0x0 0x00001000>;
+ reg-names = "reg", "cfg";
+
+ ranges = <0x02000000 0x0 0x42000000 0x0 0x42000000 0x0 0x1000000>,
+ <0x01000000 0x0 0x43000000 0x0 0x43000000 0x0 0x0010000>;
+ dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x1 0x00000000>;
+
+ #interrupt-cells = <0x1>;
+
+ interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 14 0x1>,
+ <0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 15 0x1>,
+ <0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 16 0x1>,
+ <0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 17 0x1>;
+
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+
+ msi-parent = <&its_pci>;
+
+ phys = <&pcie_phy0>;
+ phy-names = "pcie-phy";
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
new file mode 100644
index 0000000000..47a302ba4a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/cdns-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence PCIe Device
+
+maintainers:
+ - Tom Joseph <tjoseph@cadence.com>
+
+allOf:
+ - $ref: cdns-pcie.yaml#
+ - $ref: pci-ep.yaml#
+
+properties:
+ cdns,max-outbound-regions:
+ description: maximum number of outbound regions
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 32
+ default: 32
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
new file mode 100644
index 0000000000..a6b494401e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/cdns-pcie-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence PCIe Host
+
+maintainers:
+ - Tom Joseph <tjoseph@cadence.com>
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: cdns-pcie.yaml#
+
+properties:
+ cdns,max-outbound-regions:
+ description: maximum number of outbound regions
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 32
+ default: 32
+ deprecated: true
+
+ cdns,no-bar-match-nbits:
+ description:
+ Set into the no BAR match register to configure the number of least
+ significant bits kept during inbound (PCIe -> AXI) address translations
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 64
+ default: 32
+ deprecated: true
+
+ msi-parent: true
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml
new file mode 100644
index 0000000000..2e14f422e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/cdns-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence PCIe Core
+
+maintainers:
+ - Tom Joseph <tjoseph@cadence.com>
+
+properties:
+ phys:
+ description:
+ One per lane if more than one in the list. If only one PHY listed it must
+ manage all lanes.
+ minItems: 1
+ maxItems: 16
+
+ phy-names:
+ items:
+ - const: pcie-phy
+ # FIXME: names when more than 1
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/pci/faraday,ftpci100.yaml b/Documentation/devicetree/bindings/pci/faraday,ftpci100.yaml
new file mode 100644
index 0000000000..92efbf0f12
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/faraday,ftpci100.yaml
@@ -0,0 +1,174 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/faraday,ftpci100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Faraday Technology FTPCI100 PCI Host Bridge
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+ This PCI bridge is found inside that Cortina Systems Gemini SoC platform and
+ is a generic IP block from Faraday Technology. It exists in two variants:
+ plain and dual PCI. The plain version embeds a cascading interrupt controller
+ into the host bridge. The dual version routes the interrupts to the host
+ chips interrupt controller.
+ The host controller appear on the PCI bus with vendor ID 0x159b (Faraday
+ Technology) and product ID 0x4321.
+ I/O space considerations:
+ The plain variant has 128MiB of non-prefetchable memory space, whereas the
+ "dual" variant has 64MiB. Take this into account when describing the ranges.
+
+ Interrupt map considerations:
+
+ The "dual" variant will get INT A, B, C, D from the system interrupt controller
+ and should point to respective interrupt in that controller in its interrupt-map.
+
+ The code which is the only documentation of how the Faraday PCI (the non-dual
+ variant) interrupts assigns the default interrupt mapping/swizzling has
+ typically been like this, doing the swizzling on the interrupt controller side
+ rather than in the interconnect:
+
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map =
+ <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
+ <0x4800 0 0 2 &pci_intc 1>,
+ <0x4800 0 0 3 &pci_intc 2>,
+ <0x4800 0 0 4 &pci_intc 3>,
+ <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
+ <0x5000 0 0 2 &pci_intc 2>,
+ <0x5000 0 0 3 &pci_intc 3>,
+ <0x5000 0 0 4 &pci_intc 0>,
+ <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
+ <0x5800 0 0 2 &pci_intc 3>,
+ <0x5800 0 0 3 &pci_intc 0>,
+ <0x5800 0 0 4 &pci_intc 1>,
+ <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
+ <0x6000 0 0 2 &pci_intc 0>,
+ <0x6000 0 0 3 &pci_intc 1>,
+ <0x6000 0 0 4 &pci_intc 2>;
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: cortina,gemini-pci
+ - const: faraday,ftpci100
+ - items:
+ - const: cortina,gemini-pci-dual
+ - const: faraday,ftpci100-dual
+ - const: faraday,ftpci100
+ - const: faraday,ftpci100-dual
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ const: 3
+
+ "#interrupt-cells":
+ const: 1
+
+ ranges:
+ minItems: 2
+
+ dma-ranges:
+ minItems: 3
+ description: |
+ three ranges for the inbound memory region. The ranges must
+ be aligned to a 1MB boundary, and may be 1MB, 2MB, 4MB, 8MB, 16MB, 32MB, 64MB,
+ 128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked as
+ pre-fetchable.
+
+ clocks:
+ items:
+ - description: peripheral clock (PCLK)
+ - description: PCI clock (PCICLK).
+ description: |
+ If these are not present, they are assumed to be
+ hard-wired enabled and always on. The PCI clock will be 33 or 66 MHz.
+
+ clock-names:
+ items:
+ - const: PCLK
+ - const: PCICLK
+
+ interrupt-controller:
+ type: object
+
+required:
+ - reg
+ - compatible
+ - "#interrupt-cells"
+ - interrupt-map-mask
+ - interrupt-map
+ - dma-ranges
+
+if:
+ properties:
+ compatible:
+ contains:
+ const: faraday,ftpci100
+then:
+ required:
+ - interrupt-controller
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ pci@50000000 {
+ compatible = "cortina,gemini-pci", "faraday,ftpci100";
+ reg = <0x50000000 0x100>;
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ bus-range = <0x00 0xff>;
+ ranges = /* 1MiB I/O space 0x50000000-0x500fffff */
+ <0x01000000 0 0 0x50000000 0 0x00100000>,
+ /* 128MiB non-prefetchable memory 0x58000000-0x5fffffff */
+ <0x02000000 0 0x58000000 0x58000000 0 0x08000000>;
+
+ /* DMA ranges */
+ dma-ranges =
+ /* 128MiB at 0x00000000-0x07ffffff */
+ <0x02000000 0 0x00000000 0x00000000 0 0x08000000>,
+ /* 64MiB at 0x00000000-0x03ffffff */
+ <0x02000000 0 0x00000000 0x00000000 0 0x04000000>,
+ /* 64MiB at 0x00000000-0x03ffffff */
+ <0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
+
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map =
+ <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
+ <0x4800 0 0 2 &pci_intc 1>,
+ <0x4800 0 0 3 &pci_intc 2>,
+ <0x4800 0 0 4 &pci_intc 3>,
+ <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
+ <0x5000 0 0 2 &pci_intc 2>,
+ <0x5000 0 0 3 &pci_intc 3>,
+ <0x5000 0 0 4 &pci_intc 0>,
+ <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
+ <0x5800 0 0 2 &pci_intc 3>,
+ <0x5800 0 0 3 &pci_intc 0>,
+ <0x5800 0 0 4 &pci_intc 1>,
+ <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
+ <0x6000 0 0 2 &pci_intc 0>,
+ <0x6000 0 0 3 &pci_intc 0>,
+ <0x6000 0 0 4 &pci_intc 0>;
+ pci_intc: interrupt-controller {
+ interrupt-parent = <&intcon>;
+ interrupt-controller;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
new file mode 100644
index 0000000000..d91b639ae7
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-common.yaml
@@ -0,0 +1,270 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/fsl,imx6q-pcie-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6 PCIe RC/EP controller
+
+maintainers:
+ - Lucas Stach <l.stach@pengutronix.de>
+ - Richard Zhu <hongxing.zhu@nxp.com>
+
+description:
+ Generic Freescale i.MX PCIe Root Port and Endpoint controller
+ properties.
+
+properties:
+ clocks:
+ minItems: 3
+ maxItems: 4
+
+ clock-names:
+ minItems: 3
+ maxItems: 4
+
+ num-lanes:
+ const: 1
+
+ fsl,imx7d-pcie-phy:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: A phandle to an fsl,imx7d-pcie-phy node. Additional
+ required properties for imx7d-pcie, imx7d-pcie-ep, imx8mq-pcie,
+ and imx8mq-pcie-ep.
+
+ power-domains:
+ minItems: 1
+ items:
+ - description: The phandle pointing to the DISPLAY domain for
+ imx6sx-pcie, imx6sx-pcie-ep, to PCIE_PHY power domain for
+ imx7d-pcie, imx7d-pcie-ep, imx8mq-pcie and imx8mq-pcie-ep.
+ - description: The phandle pointing to the PCIE_PHY power domains
+ for imx6sx-pcie and imx6sx-pcie-ep.
+
+ power-domain-names:
+ minItems: 1
+ items:
+ - const: pcie
+ - const: pcie_phy
+
+ resets:
+ minItems: 2
+ maxItems: 3
+ description: Phandles to PCIe-related reset lines exposed by SRC
+ IP block. Additional required by imx7d-pcie, imx7d-pcie-ep,
+ imx8mq-pcie, and imx8mq-pcie-ep.
+
+ reset-names:
+ minItems: 2
+ maxItems: 3
+
+ fsl,tx-deemph-gen1:
+ description: Gen1 De-emphasis value (optional required).
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0
+
+ fsl,tx-deemph-gen2-3p5db:
+ description: Gen2 (3.5db) De-emphasis value (optional required).
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0
+
+ fsl,tx-deemph-gen2-6db:
+ description: Gen2 (6db) De-emphasis value (optional required).
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 20
+
+ fsl,tx-swing-full:
+ description: Gen2 TX SWING FULL value (optional required).
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 127
+
+ fsl,tx-swing-low:
+ description: TX launch amplitude swing_low value (optional required).
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 127
+
+ fsl,max-link-speed:
+ description: Specify PCI Gen for link capability (optional required).
+ Note that the IMX6 LVDS clock outputs do not meet gen2 jitter
+ requirements and thus for gen2 capability a gen2 compliant clock
+ generator should be used and configured.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 2, 3, 4]
+ default: 1
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ const: pcie-phy
+
+ vpcie-supply:
+ description: Should specify the regulator in charge of PCIe port power.
+ The regulator will be enabled when initializing the PCIe host and
+ disabled either as part of the init process or when shutting down
+ the host (optional required).
+
+ vph-supply:
+ description: Should specify the regulator in charge of VPH one of
+ the three PCIe PHY powers. This regulator can be supplied by both
+ 1.8v and 3.3v voltage supplies (optional required).
+
+required:
+ - clocks
+ - clock-names
+ - num-lanes
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx6sx-pcie
+ - fsl,imx6sx-pcie-ep
+ then:
+ properties:
+ clock-names:
+ items:
+ - {}
+ - {}
+ - const: pcie_phy
+ - const: pcie_inbound_axi
+ power-domains:
+ minItems: 2
+ power-domain-names:
+ minItems: 2
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx8mq-pcie
+ - fsl,imx8mq-pcie-ep
+ then:
+ properties:
+ clock-names:
+ items:
+ - {}
+ - {}
+ - const: pcie_phy
+ - const: pcie_aux
+ - if:
+ properties:
+ compatible:
+ not:
+ contains:
+ enum:
+ - fsl,imx6sx-pcie
+ - fsl,imx8mq-pcie
+ - fsl,imx6sx-pcie-ep
+ - fsl,imx8mq-pcie-ep
+ then:
+ properties:
+ clocks:
+ maxItems: 3
+ clock-names:
+ maxItems: 3
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx6q-pcie
+ - fsl,imx6qp-pcie
+ - fsl,imx7d-pcie
+ - fsl,imx6q-pcie-ep
+ - fsl,imx6qp-pcie-ep
+ - fsl,imx7d-pcie-ep
+ then:
+ properties:
+ clock-names:
+ maxItems: 3
+ contains:
+ const: pcie_phy
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx8mm-pcie
+ - fsl,imx8mp-pcie
+ - fsl,imx8mm-pcie-ep
+ - fsl,imx8mp-pcie-ep
+ then:
+ properties:
+ clock-names:
+ maxItems: 3
+ contains:
+ const: pcie_aux
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx6q-pcie
+ - fsl,imx6qp-pcie
+ - fsl,imx6q-pcie-ep
+ - fsl,imx6qp-pcie-ep
+ then:
+ properties:
+ power-domains: false
+ power-domain-names: false
+
+ - if:
+ not:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx6sx-pcie
+ - fsl,imx6q-pcie
+ - fsl,imx6qp-pcie
+ - fsl,imx6sx-pcie-ep
+ - fsl,imx6q-pcie-ep
+ - fsl,imx6qp-pcie-ep
+ then:
+ properties:
+ power-domains:
+ maxItems: 1
+ power-domain-names: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx6q-pcie
+ - fsl,imx6sx-pcie
+ - fsl,imx6qp-pcie
+ - fsl,imx7d-pcie
+ - fsl,imx8mq-pcie
+ - fsl,imx6q-pcie-ep
+ - fsl,imx6sx-pcie-ep
+ - fsl,imx6qp-pcie-ep
+ - fsl,imx7d-pcie-ep
+ - fsl,imx8mq-pcie-ep
+ then:
+ properties:
+ resets:
+ minItems: 3
+ reset-names:
+ items:
+ - const: pciephy
+ - const: apps
+ - const: turnoff
+ else:
+ properties:
+ resets:
+ maxItems: 2
+ reset-names:
+ items:
+ - const: apps
+ - const: turnoff
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
new file mode 100644
index 0000000000..ee155ed5f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/fsl,imx6q-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6 PCIe Endpoint controller
+
+maintainers:
+ - Lucas Stach <l.stach@pengutronix.de>
+ - Richard Zhu <hongxing.zhu@nxp.com>
+
+description: |+
+ This PCIe controller is based on the Synopsys DesignWare PCIe IP and
+ thus inherits all the common properties defined in snps,dw-pcie-ep.yaml.
+ The controller instances are dual mode where in they can work either in
+ Root Port mode or Endpoint mode but one at a time.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx8mm-pcie-ep
+ - fsl,imx8mq-pcie-ep
+ - fsl,imx8mp-pcie-ep
+
+ reg:
+ minItems: 2
+
+ reg-names:
+ items:
+ - const: dbi
+ - const: addr_space
+
+ clocks:
+ minItems: 3
+ items:
+ - description: PCIe bridge clock.
+ - description: PCIe bus clock.
+ - description: PCIe PHY clock.
+ - description: Additional required clock entry for imx6sx-pcie,
+ imx6sx-pcie-ep, imx8mq-pcie, imx8mq-pcie-ep.
+
+ clock-names:
+ minItems: 3
+ maxItems: 4
+
+ interrupts:
+ items:
+ - description: builtin eDMA interrupter.
+
+ interrupt-names:
+ items:
+ - const: dma
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - interrupt-names
+
+allOf:
+ - $ref: /schemas/pci/snps,dw-pcie-ep.yaml#
+ - $ref: /schemas/pci/fsl,imx6q-pcie-common.yaml#
+ - if:
+ properties:
+ compatible:
+ enum:
+ - fsl,imx8mq-pcie-ep
+ then:
+ properties:
+ clocks:
+ minItems: 4
+ clock-names:
+ items:
+ - const: pcie
+ - const: pcie_bus
+ - const: pcie_phy
+ - const: pcie_aux
+ else:
+ properties:
+ clocks:
+ maxItems: 3
+ clock-names:
+ items:
+ - const: pcie
+ - const: pcie_bus
+ - const: pcie_aux
+
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8mp-clock.h>
+ #include <dt-bindings/power/imx8mp-power.h>
+ #include <dt-bindings/reset/imx8mp-reset.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ pcie_ep: pcie-ep@33800000 {
+ compatible = "fsl,imx8mp-pcie-ep";
+ reg = <0x33800000 0x000400000>, <0x18000000 0x08000000>;
+ reg-names = "dbi", "addr_space";
+ clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+ <&clk IMX8MP_CLK_HSIO_AXI>,
+ <&clk IMX8MP_CLK_PCIE_ROOT>;
+ clock-names = "pcie", "pcie_bus", "pcie_aux";
+ assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>;
+ assigned-clock-rates = <10000000>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>;
+ num-lanes = <1>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; /* eDMA */
+ interrupt-names = "dma";
+ fsl,max-link-speed = <3>;
+ power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE>;
+ resets = <&src IMX8MP_RESET_PCIE_CTRL_APPS_EN>,
+ <&src IMX8MP_RESET_PCIE_CTRL_APPS_TURNOFF>;
+ reset-names = "apps", "turnoff";
+ phys = <&pcie_phy>;
+ phy-names = "pcie-phy";
+ num-ib-windows = <4>;
+ num-ob-windows = <4>;
+ };
diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
new file mode 100644
index 0000000000..81bbb8728f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
@@ -0,0 +1,190 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/fsl,imx6q-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX6 PCIe host controller
+
+maintainers:
+ - Lucas Stach <l.stach@pengutronix.de>
+ - Richard Zhu <hongxing.zhu@nxp.com>
+
+description: |+
+ This PCIe host controller is based on the Synopsys DesignWare PCIe IP
+ and thus inherits all the common properties defined in snps,dw-pcie.yaml.
+ The controller instances are dual mode where in they can work either in
+ Root Port mode or Endpoint mode but one at a time.
+
+ See fsl,imx6q-pcie-ep.yaml for details on the Endpoint mode device tree
+ bindings.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx6q-pcie
+ - fsl,imx6sx-pcie
+ - fsl,imx6qp-pcie
+ - fsl,imx7d-pcie
+ - fsl,imx8mq-pcie
+ - fsl,imx8mm-pcie
+ - fsl,imx8mp-pcie
+
+ reg:
+ items:
+ - description: Data Bus Interface (DBI) registers.
+ - description: PCIe configuration space region.
+
+ reg-names:
+ items:
+ - const: dbi
+ - const: config
+
+ clocks:
+ minItems: 3
+ items:
+ - description: PCIe bridge clock.
+ - description: PCIe bus clock.
+ - description: PCIe PHY clock.
+ - description: Additional required clock entry for imx6sx-pcie,
+ imx6sx-pcie-ep, imx8mq-pcie, imx8mq-pcie-ep.
+
+ clock-names:
+ minItems: 3
+ maxItems: 4
+
+ interrupts:
+ items:
+ - description: builtin MSI controller.
+
+ interrupt-names:
+ items:
+ - const: msi
+
+ reset-gpio:
+ description: Should specify the GPIO for controlling the PCI bus device
+ reset signal. It's not polarity aware and defaults to active-low reset
+ sequence (L=reset state, H=operation state) (optional required).
+
+ reset-gpio-active-high:
+ description: If present then the reset sequence using the GPIO
+ specified in the "reset-gpio" property is reversed (H=reset state,
+ L=operation state) (optional required).
+ type: boolean
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - "#address-cells"
+ - "#size-cells"
+ - device_type
+ - bus-range
+ - ranges
+ - interrupts
+ - interrupt-names
+ - "#interrupt-cells"
+ - interrupt-map-mask
+ - interrupt-map
+
+allOf:
+ - $ref: /schemas/pci/snps,dw-pcie.yaml#
+ - $ref: /schemas/pci/fsl,imx6q-pcie-common.yaml#
+ - if:
+ properties:
+ compatible:
+ enum:
+ - fsl,imx6sx-pcie
+ then:
+ properties:
+ clocks:
+ minItems: 4
+ clock-names:
+ items:
+ - const: pcie
+ - const: pcie_bus
+ - const: pcie_phy
+ - const: pcie_inbound_axi
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - fsl,imx8mq-pcie
+ then:
+ properties:
+ clocks:
+ minItems: 4
+ clock-names:
+ items:
+ - const: pcie
+ - const: pcie_bus
+ - const: pcie_phy
+ - const: pcie_aux
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - fsl,imx6q-pcie
+ - fsl,imx6qp-pcie
+ - fsl,imx7d-pcie
+ then:
+ properties:
+ clocks:
+ maxItems: 3
+ clock-names:
+ items:
+ - const: pcie
+ - const: pcie_bus
+ - const: pcie_phy
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - fsl,imx8mm-pcie
+ - fsl,imx8mp-pcie
+ then:
+ properties:
+ clocks:
+ maxItems: 3
+ clock-names:
+ items:
+ - const: pcie
+ - const: pcie_bus
+ - const: pcie_aux
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx6qdl-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ pcie: pcie@1ffc000 {
+ compatible = "fsl,imx6q-pcie";
+ reg = <0x01ffc000 0x04000>,
+ <0x01f00000 0x80000>;
+ reg-names = "dbi", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ bus-range = <0x00 0xff>;
+ ranges = <0x81000000 0 0 0x01f80000 0 0x00010000>,
+ <0x82000000 0 0x01000000 0x01000000 0 0x00f00000>;
+ num-lanes = <1>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6QDL_CLK_PCIE_AXI>,
+ <&clks IMX6QDL_CLK_LVDS1_GATE>,
+ <&clks IMX6QDL_CLK_PCIE_REF_125M>;
+ clock-names = "pcie", "pcie_bus", "pcie_phy";
+ };
+...
diff --git a/Documentation/devicetree/bindings/pci/fsl,pci.txt b/Documentation/devicetree/bindings/pci/fsl,pci.txt
new file mode 100644
index 0000000000..d8ac4a768e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/fsl,pci.txt
@@ -0,0 +1,27 @@
+* Bus Enumeration by Freescale PCI-X Agent
+
+Typically any Freescale PCI-X bridge hardware strapped into Agent mode
+is prevented from enumerating the bus. The PrPMC form-factor requires
+all mezzanines to be PCI-X Agents, but one per system may still
+enumerate the bus.
+
+The property defined below will allow a PCI-X bridge to be used for bus
+enumeration despite being strapped into Agent mode.
+
+Required properties:
+- fsl,pci-agent-force-enum : There is no value associated with this
+ property. The property itself is treated as a boolean.
+
+Example:
+
+ /* PCI-X bridge known to be PrPMC Monarch */
+ pci0: pci@ef008000 {
+ fsl,pci-agent-force-enum;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+ device_type = "pci";
+ ...
+ ...
+ };
diff --git a/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml b/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml
new file mode 100644
index 0000000000..c9f04999c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/hisilicon,kirin-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon Kirin SoCs PCIe host DT description
+
+maintainers:
+ - Xiaowei Song <songxiaowei@hisilicon.com>
+ - Binghui Wang <wangbinghui@hisilicon.com>
+
+description: |
+ Kirin PCIe host controller is based on the Synopsys DesignWare PCI core.
+ It shares common functions with the PCIe DesignWare core driver and
+ inherits common properties defined in
+ Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
+
+allOf:
+ - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+ compatible:
+ contains:
+ enum:
+ - hisilicon,kirin960-pcie
+ - hisilicon,kirin970-pcie
+
+ reg:
+ description: |
+ Should contain dbi, apb, config registers location and length.
+ For hisilicon,kirin960-pcie, it should also contain phy.
+ minItems: 3
+ maxItems: 4
+
+ reg-names:
+ minItems: 3
+ maxItems: 4
+
+ clocks: true
+
+ clock-names:
+ items:
+ - const: pcie_phy_ref
+ - const: pcie_aux
+ - const: pcie_apb_phy
+ - const: pcie_apb_sys
+ - const: pcie_aclk
+
+ phys:
+ maxItems: 1
+
+ hisilicon,clken-gpios:
+ description: |
+ Clock input enablement GPIOs from PCI devices like Ethernet, M.2 and
+ mini-PCIe slots.
+
+required:
+ - compatible
+ - reg
+ - reg-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/hi3660-clock.h>
+ #include <dt-bindings/clock/hi3670-clock.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie@f4000000 {
+ compatible = "hisilicon,kirin960-pcie";
+ reg = <0x0 0xf4000000 0x0 0x1000>,
+ <0x0 0xff3fe000 0x0 0x1000>,
+ <0x0 0xf3f20000 0x0 0x40000>,
+ <0x0 0xf5000000 0x0 0x2000>;
+ reg-names = "dbi", "apb", "phy", "config";
+ bus-range = <0x0 0xff>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x02000000 0x0 0x00000000
+ 0x0 0xf6000000
+ 0x0 0x02000000>;
+ num-lanes = <1>;
+ #interrupt-cells = <1>;
+ interrupts = <0 283 4>;
+ interrupt-names = "msi";
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0x0 0 0 1 &gic GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+ <0x0 0 0 2 &gic GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+ <0x0 0 0 3 &gic GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+ <0x0 0 0 4 &gic GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg_ctrl HI3660_PCIEPHY_REF>,
+ <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>,
+ <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>,
+ <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>,
+ <&crg_ctrl HI3660_ACLK_GATE_PCIE>;
+ clock-names = "pcie_phy_ref", "pcie_aux", "pcie_apb_phy",
+ "pcie_apb_sys", "pcie_aclk";
+ };
+
+ pcie@f5000000 {
+ compatible = "hisilicon,kirin970-pcie";
+ reg = <0x0 0xf4000000 0x0 0x1000000>,
+ <0x0 0xfc180000 0x0 0x1000>,
+ <0x0 0xf5000000 0x0 0x2000>;
+ reg-names = "dbi", "apb", "config";
+ bus-range = <0x0 0xff>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ phys = <&pcie_phy>;
+ ranges = <0x02000000 0x0 0x00000000
+ 0x0 0xf6000000
+ 0x0 0x02000000>;
+ num-lanes = <1>;
+ #interrupt-cells = <1>;
+ interrupts = <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0x0 0 0 1 &gic GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+ <0x0 0 0 2 &gic GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+ <0x0 0 0 3 &gic GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+ <0x0 0 0 4 &gic GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
+ reset-gpios = <&gpio7 0 0>;
+ hisilicon,clken-gpios = <&gpio27 3 0>, <&gpio17 0 0>, <&gpio20 6 0>;
+ pcie@0,0 { // Lane 0: PCIe switch: Bus 1, Device 0
+ reg = <0 0 0 0 0>;
+ compatible = "pciclass,0604";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ pcie@0,0 { // Lane 0: upstream
+ reg = <0 0 0 0 0>;
+ compatible = "pciclass,0604";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ pcie@1,0 { // Lane 4: M.2
+ reg = <0x0800 0 0 0 0>;
+ compatible = "pciclass,0604";
+ device_type = "pci";
+ reset-gpios = <&gpio3 1 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
+
+ pcie@5,0 { // Lane 5: Mini PCIe
+ reg = <0x2800 0 0 0 0>;
+ compatible = "pciclass,0604";
+ device_type = "pci";
+ reset-gpios = <&gpio27 4 0 >;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
+
+ pcie@7,0 { // Lane 6: Ethernet
+ reg = <0x03800 0 0 0 0>;
+ compatible = "pciclass,0604";
+ device_type = "pci";
+ reset-gpios = <&gpio25 2 0 >;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt
new file mode 100644
index 0000000000..5f0cf6c2fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt
@@ -0,0 +1,69 @@
+HiSilicon STB PCIe host bridge DT description
+
+The HiSilicon STB PCIe host controller is based on the DesignWare PCIe core.
+It shares common functions with the DesignWare PCIe core driver and inherits
+common properties defined in
+Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
+
+Additional properties are described here:
+
+Required properties
+- compatible: Should be one of the following strings:
+ "hisilicon,hi3798cv200-pcie"
+- reg: Should contain sysctl, rc_dbi, config registers location and length.
+- reg-names: Must include the following entries:
+ "control": control registers of PCIe controller;
+ "rc-dbi": configuration space of PCIe controller;
+ "config": configuration transaction space of PCIe controller.
+- bus-range: PCI bus numbers covered.
+- interrupts: MSI interrupt.
+- interrupt-names: Must include "msi" entries.
+- clocks: List of phandle and clock specifier pairs as listed in clock-names
+ property.
+- clock-name: Must include the following entries:
+ "aux": auxiliary gate clock;
+ "pipe": pipe gate clock;
+ "sys": sys gate clock;
+ "bus": bus gate clock.
+- resets: List of phandle and reset specifier pairs as listed in reset-names
+ property.
+- reset-names: Must include the following entries:
+ "soft": soft reset;
+ "sys": sys reset;
+ "bus": bus reset.
+
+Optional properties:
+- reset-gpios: The gpio to generate PCIe PERST# assert and deassert signal.
+- vpcie-supply: The regulator in charge of PCIe port power.
+- phys: List of phandle and phy mode specifier, should be 0.
+- phy-names: Must be "phy".
+
+Example:
+ pcie@f9860000 {
+ compatible = "hisilicon,hi3798cv200-pcie";
+ reg = <0xf9860000 0x1000>,
+ <0xf0000000 0x2000>,
+ <0xf2000000 0x01000000>;
+ reg-names = "control", "rc-dbi", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ bus-range = <0 15>;
+ num-lanes = <1>;
+ ranges=<0x81000000 0 0 0xf4000000 0 0x00010000
+ 0x82000000 0 0xf3000000 0xf3000000 0 0x01000000>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&crg PCIE_AUX_CLK>,
+ <&crg PCIE_PIPE_CLK>,
+ <&crg PCIE_SYS_CLK>,
+ <&crg PCIE_BUS_CLK>;
+ clock-names = "aux", "pipe", "sys", "bus";
+ resets = <&crg 0x18c 6>, <&crg 0x18c 5>, <&crg 0x18c 4>;
+ reset-names = "soft", "sys", "bus";
+ phys = <&combphy1 PHY_TYPE_PCIE>;
+ phy-names = "phy";
+ };
diff --git a/Documentation/devicetree/bindings/pci/host-generic-pci.yaml b/Documentation/devicetree/bindings/pci/host-generic-pci.yaml
new file mode 100644
index 0000000000..d25423aa71
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/host-generic-pci.yaml
@@ -0,0 +1,177 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/host-generic-pci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic PCI host controller
+
+maintainers:
+ - Will Deacon <will@kernel.org>
+
+description: |
+ Firmware-initialised PCI host controllers and PCI emulations, such as the
+ virtio-pci implementations found in kvmtool and other para-virtualised
+ systems, do not require driver support for complexities such as regulator
+ and clock management. In fact, the controller may not even require the
+ configuration of a control interface by the operating system, instead
+ presenting a set of fixed windows describing a subset of IO, Memory and
+ Configuration Spaces.
+
+ Configuration Space is assumed to be memory-mapped (as opposed to being
+ accessed via an ioport) and laid out with a direct correspondence to the
+ geography of a PCI bus address by concatenating the various components to
+ form an offset.
+
+ For CAM, this 24-bit offset is:
+
+ cfg_offset(bus, device, function, register) =
+ bus << 16 | device << 11 | function << 8 | register
+
+ While ECAM extends this by 4 bits to accommodate 4k of function space:
+
+ cfg_offset(bus, device, function, register) =
+ bus << 20 | device << 15 | function << 12 | register
+
+properties:
+ compatible:
+ description: Depends on the layout of configuration space (CAM vs ECAM
+ respectively). May also have more specific compatibles.
+ oneOf:
+ - description:
+ PCIe host controller in Arm Juno based on PLDA XpressRICH3-AXI IP
+ items:
+ - const: arm,juno-r1-pcie
+ - const: plda,xpressrich3-axi
+ - const: pci-host-ecam-generic
+ - description: |
+ ThunderX PCI host controller for pass-1.x silicon
+
+ Firmware-initialized PCI host controller to on-chip devices found on
+ some Cavium ThunderX processors. These devices have ECAM-based config
+ access, but the BARs are all at fixed addresses. We handle the fixed
+ addresses by synthesizing Enhanced Allocation (EA) capabilities for
+ these devices.
+ const: cavium,pci-host-thunder-ecam
+ - description:
+ Cavium ThunderX PEM firmware-initialized PCIe host controller
+ const: cavium,pci-host-thunder-pem
+ - description:
+ HiSilicon Hip06/Hip07 PCIe host bridge in almost-ECAM mode. Some
+ firmware places the host controller in a mode where it is ECAM
+ compliant for all devices other than the root complex.
+ enum:
+ - hisilicon,hip06-pcie-ecam
+ - hisilicon,hip07-pcie-ecam
+ - description: |
+ In some cases, firmware may already have configured the Synopsys
+ DesignWare PCIe controller in RC mode with static ATU window mappings
+ that cover all config, MMIO and I/O spaces in a [mostly] ECAM
+ compatible fashion. In this case, there is no need for the OS to
+ perform any low level setup of clocks, PHYs or device registers, nor
+ is there any reason for the driver to reconfigure ATU windows for
+ config and/or IO space accesses at runtime.
+
+ In cases where the IP was synthesized with a minimum ATU window size
+ of 64 KB, it cannot be supported by the generic ECAM driver, because
+ it requires special config space accessors that filter accesses to
+ device #1 and beyond on the first bus.
+ items:
+ - enum:
+ - marvell,armada8k-pcie-ecam
+ - socionext,synquacer-pcie-ecam
+ - const: snps,dw-pcie-ecam
+ - description:
+ CAM or ECAM compliant PCI host controllers without any quirks
+ enum:
+ - pci-host-cam-generic
+ - pci-host-ecam-generic
+
+ reg:
+ description:
+ The Configuration Space base address and size, as accessed from the parent
+ bus. The base address corresponds to the first bus in the "bus-range"
+ property. If no "bus-range" is specified, this will be bus 0 (the
+ default). Some host controllers have a 2nd non-compliant address range,
+ so 2 entries are allowed.
+ minItems: 1
+ maxItems: 2
+
+ ranges:
+ description:
+ As described in IEEE Std 1275-1994, but must provide at least a
+ definition of non-prefetchable memory. One or both of prefetchable Memory
+ and IO Space may also be provided.
+ minItems: 1
+ maxItems: 3
+
+ dma-coherent: true
+ iommu-map: true
+ iommu-map-mask: true
+ msi-parent: true
+
+required:
+ - compatible
+ - reg
+ - ranges
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: arm,juno-r1-pcie
+ then:
+ required:
+ - dma-coherent
+
+ - if:
+ properties:
+ compatible:
+ not:
+ contains:
+ enum:
+ - cavium,pci-host-thunder-pem
+ - hisilicon,hip06-pcie-ecam
+ - hisilicon,hip07-pcie-ecam
+ then:
+ properties:
+ reg:
+ maxItems: 1
+
+unevaluatedProperties: false
+
+examples:
+ - |
+
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ pcie@40000000 {
+ compatible = "pci-host-cam-generic";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x0 0x1>;
+
+ // CPU_PHYSICAL(2) SIZE(2)
+ reg = <0x0 0x40000000 0x0 0x1000000>;
+
+ // BUS_ADDRESS(3) CPU_PHYSICAL(2) SIZE(2)
+ ranges = <0x01000000 0x0 0x01000000 0x0 0x01000000 0x0 0x00010000>,
+ <0x02000000 0x0 0x41000000 0x0 0x41000000 0x0 0x3f000000>;
+
+ #interrupt-cells = <0x1>;
+
+ // PCI_DEVICE(3) INT#(1) CONTROLLER(PHANDLE) CONTROLLER_DATA(3)
+ interrupt-map = < 0x0 0x0 0x0 0x1 &gic 0x0 0x4 0x1>,
+ < 0x800 0x0 0x0 0x1 &gic 0x0 0x5 0x1>,
+ <0x1000 0x0 0x0 0x1 &gic 0x0 0x6 0x1>,
+ <0x1800 0x0 0x0 0x1 &gic 0x0 0x7 0x1>;
+
+ // PCI_DEVICE(3) INT#(1)
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml b/Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml
new file mode 100644
index 0000000000..debfb54a80
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/intel,ixp4xx-pci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP4xx PCI controller
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+description: PCI host controller found in the Intel IXP4xx SoC series.
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - intel,ixp42x-pci
+ - intel,ixp43x-pci
+ description: The two supported variants are ixp42x and ixp43x,
+ though more variants may exist.
+
+ reg:
+ items:
+ - description: IXP4xx-specific registers
+
+ interrupts:
+ items:
+ - description: Main PCI interrupt
+ - description: PCI DMA interrupt 1
+ - description: PCI DMA interrupt 2
+
+ ranges:
+ maxItems: 2
+ description: Typically one memory range of 64MB and one IO
+ space range of 64KB.
+
+ dma-ranges:
+ maxItems: 1
+ description: The DMA range tells the PCI host which addresses
+ the RAM is at. It can map only 64MB so if the RAM is bigger
+ than 64MB the DMA access has to be restricted to these
+ addresses.
+
+ "#interrupt-cells": true
+
+ interrupt-map: true
+
+ interrupt-map-mask:
+ items:
+ - const: 0xf800
+ - const: 0
+ - const: 0
+ - const: 7
+
+required:
+ - compatible
+ - reg
+ - dma-ranges
+ - "#interrupt-cells"
+ - interrupt-map
+ - interrupt-map-mask
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ pci@c0000000 {
+ compatible = "intel,ixp43x-pci";
+ reg = <0xc0000000 0x1000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ bus-range = <0x00 0xff>;
+
+ ranges =
+ <0x02000000 0 0x48000000 0x48000000 0 0x04000000>,
+ <0x01000000 0 0x00000000 0x4c000000 0 0x00010000>;
+ dma-ranges =
+ <0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map =
+ <0x0800 0 0 1 &gpio0 11 3>, /* INT A on slot 1 is irq 11 */
+ <0x0800 0 0 2 &gpio0 10 3>, /* INT B on slot 1 is irq 10 */
+ <0x0800 0 0 3 &gpio0 9 3>, /* INT C on slot 1 is irq 9 */
+ <0x0800 0 0 4 &gpio0 8 3>, /* INT D on slot 1 is irq 8 */
+ <0x1000 0 0 1 &gpio0 10 3>, /* INT A on slot 2 is irq 10 */
+ <0x1000 0 0 2 &gpio0 9 3>, /* INT B on slot 2 is irq 9 */
+ <0x1000 0 0 3 &gpio0 8 3>, /* INT C on slot 2 is irq 8 */
+ <0x1000 0 0 4 &gpio0 11 3>, /* INT D on slot 2 is irq 11 */
+ <0x1800 0 0 1 &gpio0 9 3>, /* INT A on slot 3 is irq 9 */
+ <0x1800 0 0 2 &gpio0 8 3>, /* INT B on slot 3 is irq 8 */
+ <0x1800 0 0 3 &gpio0 11 3>, /* INT C on slot 3 is irq 11 */
+ <0x1800 0 0 4 &gpio0 10 3>; /* INT D on slot 3 is irq 10 */
+ };
diff --git a/Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml
new file mode 100644
index 0000000000..730e63fd76
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/intel,keembay-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Keem Bay PCIe controller Endpoint mode
+
+maintainers:
+ - Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
+ - Srikanth Thokala <srikanth.thokala@intel.com>
+
+properties:
+ compatible:
+ const: intel,keembay-pcie-ep
+
+ reg:
+ maxItems: 5
+
+ reg-names:
+ items:
+ - const: dbi
+ - const: dbi2
+ - const: atu
+ - const: addr_space
+ - const: apb
+
+ interrupts:
+ maxItems: 4
+
+ interrupt-names:
+ items:
+ - const: pcie
+ - const: pcie_ev
+ - const: pcie_err
+ - const: pcie_mem_access
+
+ num-lanes:
+ description: Number of lanes to use.
+ enum: [ 1, 2 ]
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - interrupt-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ pcie-ep@37000000 {
+ compatible = "intel,keembay-pcie-ep";
+ reg = <0x37000000 0x00001000>,
+ <0x37100000 0x00001000>,
+ <0x37300000 0x00001000>,
+ <0x36000000 0x01000000>,
+ <0x37800000 0x00000200>;
+ reg-names = "dbi", "dbi2", "atu", "addr_space", "apb";
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pcie", "pcie_ev", "pcie_err", "pcie_mem_access";
+ num-lanes = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml b/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml
new file mode 100644
index 0000000000..505acc4f3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/intel,keembay-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Keem Bay PCIe controller Root Complex mode
+
+maintainers:
+ - Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
+ - Srikanth Thokala <srikanth.thokala@intel.com>
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+ compatible:
+ const: intel,keembay-pcie
+
+ ranges:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ reg:
+ maxItems: 4
+
+ reg-names:
+ items:
+ - const: dbi
+ - const: atu
+ - const: config
+ - const: apb
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: master
+ - const: aux
+
+ interrupts:
+ maxItems: 3
+
+ interrupt-names:
+ items:
+ - const: pcie
+ - const: pcie_ev
+ - const: pcie_err
+
+ num-lanes:
+ description: Number of lanes to use.
+ enum: [ 1, 2 ]
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - ranges
+ - clocks
+ - clock-names
+ - interrupts
+ - interrupt-names
+ - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #define KEEM_BAY_A53_PCIE
+ #define KEEM_BAY_A53_AUX_PCIE
+ pcie@37000000 {
+ compatible = "intel,keembay-pcie";
+ reg = <0x37000000 0x00001000>,
+ <0x37300000 0x00001000>,
+ <0x36e00000 0x00200000>,
+ <0x37800000 0x00000200>;
+ reg-names = "dbi", "atu", "config", "apb";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x02000000 0 0x36000000 0x36000000 0 0x00e00000>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pcie", "pcie_ev", "pcie_err";
+ clocks = <&scmi_clk KEEM_BAY_A53_PCIE>,
+ <&scmi_clk KEEM_BAY_A53_AUX_PCIE>;
+ clock-names = "master", "aux";
+ reset-gpios = <&pca2 9 GPIO_ACTIVE_LOW>;
+ num-lanes = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
new file mode 100644
index 0000000000..54e2890ae6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/intel-gw-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PCIe RC controller on Intel Gateway SoCs
+
+maintainers:
+ - Rahul Tanwar <rtanwar@maxlinear.com>
+
+select:
+ properties:
+ compatible:
+ contains:
+ const: intel,lgm-pcie
+ required:
+ - compatible
+
+allOf:
+ - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: intel,lgm-pcie
+ - const: snps,dw-pcie
+
+ reg:
+ items:
+ - description: Controller control and status registers.
+ - description: PCIe configuration registers.
+ - description: Controller application registers.
+
+ reg-names:
+ items:
+ - const: dbi
+ - const: config
+ - const: app
+
+ ranges:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ const: pcie
+
+ reset-gpios:
+ maxItems: 1
+
+ num-lanes:
+ maximum: 2
+
+ max-link-speed:
+ enum: [1, 2, 3, 4]
+ default: 1
+
+ reset-assert-ms:
+ description: |
+ Delay after asserting reset to the PCIe device.
+ maximum: 500
+ default: 100
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - ranges
+ - resets
+ - clocks
+ - phys
+ - phy-names
+ - reset-gpios
+ - '#interrupt-cells'
+ - interrupt-map
+ - interrupt-map-mask
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ pcie10: pcie@d0e00000 {
+ compatible = "intel,lgm-pcie", "snps,dw-pcie";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ reg = <0xd0e00000 0x1000>,
+ <0xd2000000 0x800000>,
+ <0xd0a41000 0x1000>;
+ reg-names = "dbi", "config", "app";
+ linux,pci-domain = <0>;
+ max-link-speed = <4>;
+ bus-range = <0x00 0x08>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &ioapic1 27 1>,
+ <0 0 0 2 &ioapic1 28 1>,
+ <0 0 0 3 &ioapic1 29 1>,
+ <0 0 0 4 &ioapic1 30 1>;
+ ranges = <0x02000000 0 0xd4000000 0xd4000000 0 0x04000000>;
+ resets = <&rcu0 0x50 0>;
+ clocks = <&cgu0 120>;
+ phys = <&cb0phy0>;
+ phy-names = "pcie";
+ reset-assert-ms = <500>;
+ reset-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ num-lanes = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
new file mode 100644
index 0000000000..ee8a4791a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
@@ -0,0 +1,79 @@
+Freescale Layerscape PCIe controller
+
+This PCIe host controller is based on the Synopsys DesignWare PCIe IP
+and thus inherits all the common properties defined in snps,dw-pcie.yaml.
+
+This controller derives its clocks from the Reset Configuration Word (RCW)
+which is used to describe the PLL settings at the time of chip-reset.
+
+Also as per the available Reference Manuals, there is no specific 'version'
+register available in the Freescale PCIe controller register set,
+which can allow determining the underlying DesignWare PCIe controller version
+information.
+
+Required properties:
+- compatible: should contain the platform identifier such as:
+ RC mode:
+ "fsl,ls1021a-pcie"
+ "fsl,ls2080a-pcie", "fsl,ls2085a-pcie"
+ "fsl,ls2088a-pcie"
+ "fsl,ls1088a-pcie"
+ "fsl,ls1046a-pcie"
+ "fsl,ls1043a-pcie"
+ "fsl,ls1012a-pcie"
+ "fsl,ls1028a-pcie"
+ EP mode:
+ "fsl,ls1028a-pcie-ep", "fsl,ls-pcie-ep"
+ "fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
+ "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"
+ "fsl,ls2088a-pcie-ep", "fsl,ls-pcie-ep"
+ "fsl,lx2160ar2-pcie-ep", "fsl,ls-pcie-ep"
+- reg: base addresses and lengths of the PCIe controller register blocks.
+- interrupts: A list of interrupt outputs of the controller. Must contain an
+ entry for each entry in the interrupt-names property.
+- interrupt-names: It could include the following entries:
+ "aer": Used for interrupt line which reports AER events when
+ non MSI/MSI-X/INTx mode is used
+ "pme": Used for interrupt line which reports PME events when
+ non MSI/MSI-X/INTx mode is used
+ "intr": Used for SoCs(like ls2080a, lx2160a, ls2080a, ls2088a, ls1088a)
+ which has a single interrupt line for miscellaneous controller
+ events(could include AER and PME events).
+- fsl,pcie-scfg: Must include two entries.
+ The first entry must be a link to the SCFG device node
+ The second entry is the physical PCIe controller index starting from '0'.
+ This is used to get SCFG PEXN registers
+- dma-coherent: Indicates that the hardware IP block can ensure the coherency
+ of the data transferred from/to the IP block. This can avoid the software
+ cache flush/invalid actions, and improve the performance significantly.
+
+Optional properties:
+- big-endian: If the PEX_LUT and PF register block is in big-endian, specify
+ this property.
+
+Example:
+
+ pcie@3400000 {
+ compatible = "fsl,ls1088a-pcie";
+ reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
+ <0x20 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+ interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
+ interrupt-names = "aer";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ dma-coherent;
+ num-viewport = <256>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
+ msi-parent = <&its>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 0 0 109 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 2 &gic 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 3 &gic 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 4 &gic 0 0 0 112 IRQ_TYPE_LEVEL_HIGH>;
+ iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
+ };
diff --git a/Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt b/Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt
new file mode 100644
index 0000000000..b40fb5d15d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt
@@ -0,0 +1,52 @@
+NXP Layerscape PCIe Gen4 controller
+
+This PCIe controller is based on the Mobiveil PCIe IP and thus inherits all
+the common properties defined in mobiveil-pcie.txt.
+
+Required properties:
+- compatible: should contain the platform identifier such as:
+ "fsl,lx2160a-pcie"
+- reg: base addresses and lengths of the PCIe controller register blocks.
+ "csr_axi_slave": Bridge config registers
+ "config_axi_slave": PCIe controller registers
+- interrupts: A list of interrupt outputs of the controller. Must contain an
+ entry for each entry in the interrupt-names property.
+- interrupt-names: It could include the following entries:
+ "intr": The interrupt that is asserted for controller interrupts
+ "aer": Asserted for aer interrupt when chip support the aer interrupt with
+ none MSI/MSI-X/INTx mode,but there is interrupt line for aer.
+ "pme": Asserted for pme interrupt when chip support the pme interrupt with
+ none MSI/MSI-X/INTx mode,but there is interrupt line for pme.
+- dma-coherent: Indicates that the hardware IP block can ensure the coherency
+ of the data transferred from/to the IP block. This can avoid the software
+ cache flush/invalid actions, and improve the performance significantly.
+- msi-parent : See the generic MSI binding described in
+ Documentation/devicetree/bindings/interrupt-controller/msi.txt.
+
+Example:
+
+ pcie@3400000 {
+ compatible = "fsl,lx2160a-pcie";
+ reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
+ 0x80 0x00000000 0x0 0x00001000>; /* configuration space */
+ reg-names = "csr_axi_slave", "config_axi_slave";
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+ interrupt-names = "aer", "pme", "intr";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ apio-wins = <8>;
+ ppio-wins = <8>;
+ dma-coherent;
+ bus-range = <0x0 0xff>;
+ msi-parent = <&its>;
+ ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+ <0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ };
diff --git a/Documentation/devicetree/bindings/pci/loongson.yaml b/Documentation/devicetree/bindings/pci/loongson.yaml
new file mode 100644
index 0000000000..a8324a9bd0
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/loongson.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/loongson.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson PCI Host Controller
+
+maintainers:
+ - Jiaxun Yang <jiaxun.yang@flygoat.com>
+
+description: |+
+ PCI host controller found on Loongson PCHs and SoCs.
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+ compatible:
+ enum:
+ - loongson,ls2k-pci
+ - loongson,ls7a-pci
+ - loongson,rs780e-pci
+
+ reg:
+ minItems: 1
+ items:
+ - description: CFG0 standard config space register
+ - description: CFG1 extended config space register
+
+ ranges:
+ minItems: 1
+ maxItems: 3
+
+
+required:
+ - compatible
+ - reg
+ - ranges
+
+unevaluatedProperties: false
+
+examples:
+ - |
+
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ pcie@1a000000 {
+ compatible = "loongson,rs780e-pci";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ // CPU_PHYSICAL(2) SIZE(2)
+ reg = <0x0 0x1a000000 0x0 0x2000000>;
+
+ // BUS_ADDRESS(3) CPU_PHYSICAL(2) SIZE(2)
+ ranges = <0x01000000 0x0 0x00004000 0x0 0x00004000 0x0 0x00004000>,
+ <0x02000000 0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml b/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml
new file mode 100644
index 0000000000..e63e6458ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/mediatek,mt7621-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7621 PCIe controller
+
+maintainers:
+ - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |+
+ MediaTek MT7621 PCIe subsys supports a single Root Complex (RC)
+ with 3 Root Ports. Each Root Port supports a Gen1 1-lane Link
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+ compatible:
+ const: mediatek,mt7621-pci
+
+ reg:
+ items:
+ - description: host-pci bridge registers
+ - description: pcie port 0 RC control registers
+ - description: pcie port 1 RC control registers
+ - description: pcie port 2 RC control registers
+
+ ranges:
+ maxItems: 2
+
+patternProperties:
+ '^pcie@[0-2],0$':
+ type: object
+ $ref: /schemas/pci/pci-bus.yaml#
+
+ properties:
+ resets:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ pattern: '^pcie-phy[0-2]$'
+
+ required:
+ - "#interrupt-cells"
+ - interrupt-map-mask
+ - interrupt-map
+ - resets
+ - clocks
+ - phys
+ - phy-names
+ - ranges
+
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - ranges
+ - "#interrupt-cells"
+ - interrupt-map-mask
+ - interrupt-map
+ - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/mips-gic.h>
+
+ pcie: pcie@1e140000 {
+ compatible = "mediatek,mt7621-pci";
+ reg = <0x1e140000 0x100>,
+ <0x1e142000 0x100>,
+ <0x1e143000 0x100>,
+ <0x1e144000 0x100>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_pins>;
+ device_type = "pci";
+ ranges = <0x02000000 0 0x60000000 0x60000000 0 0x10000000>, /* pci memory */
+ <0x01000000 0 0x1e160000 0x1e160000 0 0x00010000>; /* io space */
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xF800 0 0 0>;
+ interrupt-map = <0x0000 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>,
+ <0x0800 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>,
+ <0x1000 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
+ reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+
+ pcie@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rstctrl 24>;
+ clocks = <&clkctrl 24>;
+ phys = <&pcie0_phy 1>;
+ phy-names = "pcie-phy0";
+ ranges;
+ };
+
+ pcie@1,0 {
+ reg = <0x0800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rstctrl 25>;
+ clocks = <&clkctrl 25>;
+ phys = <&pcie0_phy 1>;
+ phy-names = "pcie-phy1";
+ ranges;
+ };
+
+ pcie@2,0 {
+ reg = <0x1000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rstctrl 26>;
+ clocks = <&clkctrl 26>;
+ phys = <&pcie2_phy 0>;
+ phy-names = "pcie-phy2";
+ ranges;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml
new file mode 100644
index 0000000000..841a3d284b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/mediatek-pcie-cfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek PCIECFG controller
+
+maintainers:
+ - Chuanjia Liu <chuanjia.liu@mediatek.com>
+ - Jianjun Wang <jianjun.wang@mediatek.com>
+
+description: |
+ The MediaTek PCIECFG controller controls some feature about
+ LTSSM, ASPM and so on.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - mediatek,generic-pciecfg
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ pciecfg: pciecfg@1a140000 {
+ compatible = "mediatek,generic-pciecfg", "syscon";
+ reg = <0x1a140000 0x1000>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
new file mode 100644
index 0000000000..7e8c7a2a5f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml
@@ -0,0 +1,242 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/mediatek-pcie-gen3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Gen3 PCIe controller on MediaTek SoCs
+
+maintainers:
+ - Jianjun Wang <jianjun.wang@mediatek.com>
+
+description: |+
+ PCIe Gen3 MAC controller for MediaTek SoCs, it supports Gen3 speed
+ and compatible with Gen2, Gen1 speed.
+
+ This PCIe controller supports up to 256 MSI vectors, the MSI hardware
+ block diagram is as follows:
+
+ +-----+
+ | GIC |
+ +-----+
+ ^
+ |
+ port->irq
+ |
+ +-+-+-+-+-+-+-+-+
+ |0|1|2|3|4|5|6|7| (PCIe intc)
+ +-+-+-+-+-+-+-+-+
+ ^ ^ ^
+ | | ... |
+ +-------+ +------+ +-----------+
+ | | |
+ +-+-+---+--+--+ +-+-+---+--+--+ +-+-+---+--+--+
+ |0|1|...|30|31| |0|1|...|30|31| |0|1|...|30|31| (MSI sets)
+ +-+-+---+--+--+ +-+-+---+--+--+ +-+-+---+--+--+
+ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^
+ | | | | | | | | | | | | (MSI vectors)
+ | | | | | | | | | | | |
+
+ (MSI SET0) (MSI SET1) ... (MSI SET7)
+
+ With 256 MSI vectors supported, the MSI vectors are composed of 8 sets,
+ each set has its own address for MSI message, and supports 32 MSI vectors
+ to generate interrupt.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - mediatek,mt7986-pcie
+ - mediatek,mt8188-pcie
+ - mediatek,mt8195-pcie
+ - const: mediatek,mt8192-pcie
+ - const: mediatek,mt8192-pcie
+
+ reg:
+ maxItems: 1
+
+ reg-names:
+ items:
+ - const: pcie-mac
+
+ interrupts:
+ maxItems: 1
+
+ ranges:
+ minItems: 1
+ maxItems: 8
+
+ iommu-map:
+ maxItems: 1
+
+ iommu-map-mask:
+ const: 0
+
+ resets:
+ minItems: 1
+ maxItems: 2
+
+ reset-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ enum: [ phy, mac ]
+
+ clocks:
+ minItems: 4
+ maxItems: 6
+
+ clock-names:
+ minItems: 4
+ maxItems: 6
+
+ assigned-clocks:
+ maxItems: 1
+
+ assigned-clock-parents:
+ maxItems: 1
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ items:
+ - const: pcie-phy
+
+ power-domains:
+ maxItems: 1
+
+ '#interrupt-cells':
+ const: 1
+
+ interrupt-controller:
+ description: Interrupt controller node for handling legacy PCI interrupts.
+ type: object
+ properties:
+ '#address-cells':
+ const: 0
+ '#interrupt-cells':
+ const: 1
+ interrupt-controller: true
+
+ required:
+ - '#address-cells'
+ - '#interrupt-cells'
+ - interrupt-controller
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - ranges
+ - clocks
+ - clock-names
+ - '#interrupt-cells'
+ - interrupt-controller
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+ - if:
+ properties:
+ compatible:
+ const: mediatek,mt8192-pcie
+ then:
+ properties:
+ clock-names:
+ items:
+ - const: pl_250m
+ - const: tl_26m
+ - const: tl_96m
+ - const: tl_32k
+ - const: peri_26m
+ - const: top_133m
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - mediatek,mt8188-pcie
+ - mediatek,mt8195-pcie
+ then:
+ properties:
+ clock-names:
+ items:
+ - const: pl_250m
+ - const: tl_26m
+ - const: tl_96m
+ - const: tl_32k
+ - const: peri_26m
+ - const: peri_mem
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - mediatek,mt7986-pcie
+ then:
+ properties:
+ clock-names:
+ items:
+ - const: pl_250m
+ - const: tl_26m
+ - const: peri_26m
+ - const: top_133m
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie: pcie@11230000 {
+ compatible = "mediatek,mt8192-pcie";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ reg = <0x00 0x11230000 0x00 0x4000>;
+ reg-names = "pcie-mac";
+ interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH 0>;
+ bus-range = <0x00 0xff>;
+ ranges = <0x82000000 0x00 0x12000000 0x00
+ 0x12000000 0x00 0x1000000>;
+ clocks = <&infracfg 44>,
+ <&infracfg 40>,
+ <&infracfg 43>,
+ <&infracfg 97>,
+ <&infracfg 99>,
+ <&infracfg 111>;
+ clock-names = "pl_250m", "tl_26m", "tl_96m",
+ "tl_32k", "peri_26m", "top_133m";
+ assigned-clocks = <&topckgen 50>;
+ assigned-clock-parents = <&topckgen 91>;
+
+ phys = <&pciephy>;
+ phy-names = "pcie-phy";
+
+ resets = <&infracfg_rst 2>,
+ <&infracfg_rst 3>;
+ reset-names = "phy", "mac";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &pcie_intc 0>,
+ <0 0 0 2 &pcie_intc 1>,
+ <0 0 0 3 &pcie_intc 2>,
+ <0 0 0 4 &pcie_intc 3>;
+ pcie_intc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
new file mode 100644
index 0000000000..6842275222
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
@@ -0,0 +1,289 @@
+MediaTek Gen2 PCIe controller
+
+Required properties:
+- compatible: Should contain one of the following strings:
+ "mediatek,mt2701-pcie"
+ "mediatek,mt2712-pcie"
+ "mediatek,mt7622-pcie"
+ "mediatek,mt7623-pcie"
+ "mediatek,mt7629-pcie"
+ "airoha,en7523-pcie"
+- device_type: Must be "pci"
+- reg: Base addresses and lengths of the root ports.
+- reg-names: Names of the above areas to use during resource lookup.
+- #address-cells: Address representation for root ports (must be 3)
+- #size-cells: Size representation for root ports (must be 2)
+- clocks: Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names:
+ Mandatory entries:
+ - sys_ckN :transaction layer and data link layer clock
+ Required entries for MT2701/MT7623:
+ - free_ck :for reference clock of PCIe subsys
+ Required entries for MT2712/MT7622:
+ - ahb_ckN :AHB slave interface operating clock for CSR access and RC
+ initiated MMIO access
+ Required entries for MT7622:
+ - axi_ckN :application layer MMIO channel operating clock
+ - aux_ckN :pe2_mac_bridge and pe2_mac_core operating clock when
+ pcie_mac_ck/pcie_pipe_ck is turned off
+ - obff_ckN :OBFF functional block operating clock
+ - pipe_ckN :LTSSM and PHY/MAC layer operating clock
+ where N starting from 0 to one less than the number of root ports.
+- phys: List of PHY specifiers (used by generic PHY framework).
+- phy-names : Must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the
+ number of PHYs as specified in *phys* property.
+- power-domains: A phandle and power domain specifier pair to the power domain
+ which is responsible for collapsing and restoring power to the peripheral.
+- bus-range: Range of bus numbers associated with this controller.
+- ranges: Ranges for the PCI memory and I/O regions.
+
+Required properties for MT7623/MT2701:
+- #interrupt-cells: Size representation for interrupts (must be 1)
+- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
+ Please refer to the standard PCI bus binding document for a more detailed
+ explanation.
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names: Must be "pcie-rst0", "pcie-rst1", "pcie-rstN".. based on the
+ number of root ports.
+
+Required properties for MT2712/MT7622/MT7629:
+-interrupts: A list of interrupt outputs of the controller, must have one
+ entry for each PCIe port
+- interrupt-names: Must include the following entries:
+ - "pcie_irq": The interrupt that is asserted when an MSI/INTX is received
+- linux,pci-domain: PCI domain ID. Should be unique for each host controller
+
+In addition, the device tree node must have sub-nodes describing each
+PCIe port interface, having the following mandatory properties:
+
+Required properties:
+- device_type: Must be "pci"
+- reg: Only the first four bytes are used to refer to the correct bus number
+ and device number.
+- #address-cells: Must be 3
+- #size-cells: Must be 2
+- #interrupt-cells: Must be 1
+- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
+ Please refer to the standard PCI bus binding document for a more detailed
+ explanation.
+- ranges: Sub-ranges distributed from the PCIe controller node. An empty
+ property is sufficient.
+
+Examples for MT7623:
+
+ hifsys: syscon@1a000000 {
+ compatible = "mediatek,mt7623-hifsys",
+ "mediatek,mt2701-hifsys",
+ "syscon";
+ reg = <0 0x1a000000 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ pcie: pcie@1a140000 {
+ compatible = "mediatek,mt7623-pcie";
+ device_type = "pci";
+ reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */
+ <0 0x1a142000 0 0x1000>, /* Port0 registers */
+ <0 0x1a143000 0 0x1000>, /* Port1 registers */
+ <0 0x1a144000 0 0x1000>; /* Port2 registers */
+ reg-names = "subsys", "port0", "port1", "port2";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 0>;
+ interrupt-map = <0x0000 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>,
+ <0x0800 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>,
+ <0x1000 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
+ <&hifsys CLK_HIFSYS_PCIE0>,
+ <&hifsys CLK_HIFSYS_PCIE1>,
+ <&hifsys CLK_HIFSYS_PCIE2>;
+ clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2";
+ resets = <&hifsys MT2701_HIFSYS_PCIE0_RST>,
+ <&hifsys MT2701_HIFSYS_PCIE1_RST>,
+ <&hifsys MT2701_HIFSYS_PCIE2_RST>;
+ reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2";
+ phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>,
+ <&pcie2_phy PHY_TYPE_PCIE>;
+ phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+ bus-range = <0x00 0xff>;
+ ranges = <0x81000000 0 0x1a160000 0 0x1a160000 0 0x00010000 /* I/O space */
+ 0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>; /* memory space */
+
+ pcie@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>;
+ ranges;
+ };
+
+ pcie@1,0 {
+ reg = <0x0800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>;
+ ranges;
+ };
+
+ pcie@2,0 {
+ reg = <0x1000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+ ranges;
+ };
+ };
+
+Examples for MT2712:
+
+ pcie1: pcie@112ff000 {
+ compatible = "mediatek,mt2712-pcie";
+ device_type = "pci";
+ reg = <0 0x112ff000 0 0x1000>;
+ reg-names = "port1";
+ linux,pci-domain = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pcie_irq";
+ clocks = <&topckgen CLK_TOP_PE2_MAC_P1_SEL>,
+ <&pericfg CLK_PERI_PCIE1>;
+ clock-names = "sys_ck1", "ahb_ck1";
+ phys = <&u3port1 PHY_TYPE_PCIE>;
+ phy-names = "pcie-phy1";
+ bus-range = <0x00 0xff>;
+ ranges = <0x82000000 0 0x11400000 0x0 0x11400000 0 0x300000>;
+ status = "disabled";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+ <0 0 0 2 &pcie_intc1 1>,
+ <0 0 0 3 &pcie_intc1 2>,
+ <0 0 0 4 &pcie_intc1 3>;
+ pcie_intc1: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ pcie0: pcie@11700000 {
+ compatible = "mediatek,mt2712-pcie";
+ device_type = "pci";
+ reg = <0 0x11700000 0 0x1000>;
+ reg-names = "port0";
+ linux,pci-domain = <0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pcie_irq";
+ clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>,
+ <&pericfg CLK_PERI_PCIE0>;
+ clock-names = "sys_ck0", "ahb_ck0";
+ phys = <&u3port0 PHY_TYPE_PCIE>;
+ phy-names = "pcie-phy0";
+ bus-range = <0x00 0xff>;
+ ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>;
+ status = "disabled";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+ <0 0 0 2 &pcie_intc0 1>,
+ <0 0 0 3 &pcie_intc0 2>,
+ <0 0 0 4 &pcie_intc0 3>;
+ pcie_intc0: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
+Examples for MT7622:
+
+ pcie0: pcie@1a143000 {
+ compatible = "mediatek,mt7622-pcie";
+ device_type = "pci";
+ reg = <0 0x1a143000 0 0x1000>;
+ reg-names = "port0";
+ linux,pci-domain = <0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "pcie_irq";
+ clocks = <&pciesys CLK_PCIE_P0_MAC_EN>,
+ <&pciesys CLK_PCIE_P0_AHB_EN>,
+ <&pciesys CLK_PCIE_P0_AUX_EN>,
+ <&pciesys CLK_PCIE_P0_AXI_EN>,
+ <&pciesys CLK_PCIE_P0_OBFF_EN>,
+ <&pciesys CLK_PCIE_P0_PIPE_EN>;
+ clock-names = "sys_ck0", "ahb_ck0", "aux_ck0",
+ "axi_ck0", "obff_ck0", "pipe_ck0";
+
+ power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+ bus-range = <0x00 0xff>;
+ ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x8000000>;
+ status = "disabled";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+ <0 0 0 2 &pcie_intc0 1>,
+ <0 0 0 3 &pcie_intc0 2>,
+ <0 0 0 4 &pcie_intc0 3>;
+ pcie_intc0: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ pcie1: pcie@1a145000 {
+ compatible = "mediatek,mt7622-pcie";
+ device_type = "pci";
+ reg = <0 0x1a145000 0 0x1000>;
+ reg-names = "port1";
+ linux,pci-domain = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "pcie_irq";
+ clocks = <&pciesys CLK_PCIE_P1_MAC_EN>,
+ /* designer has connect RC1 with p0_ahb clock */
+ <&pciesys CLK_PCIE_P0_AHB_EN>,
+ <&pciesys CLK_PCIE_P1_AUX_EN>,
+ <&pciesys CLK_PCIE_P1_AXI_EN>,
+ <&pciesys CLK_PCIE_P1_OBFF_EN>,
+ <&pciesys CLK_PCIE_P1_PIPE_EN>;
+ clock-names = "sys_ck1", "ahb_ck1", "aux_ck1",
+ "axi_ck1", "obff_ck1", "pipe_ck1";
+
+ power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+ bus-range = <0x00 0xff>;
+ ranges = <0x82000000 0 0x28000000 0x0 0x28000000 0 0x8000000>;
+ status = "disabled";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+ <0 0 0 2 &pcie_intc1 1>,
+ <0 0 0 3 &pcie_intc1 2>,
+ <0 0 0 4 &pcie_intc1 3>;
+ pcie_intc1: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
new file mode 100644
index 0000000000..f7a3c26363
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/microchip,pcie-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip PCIe Root Port Bridge Controller
+
+maintainers:
+ - Daire McNamara <daire.mcnamara@microchip.com>
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+
+properties:
+ compatible:
+ const: microchip,pcie-host-1.0 # PolarFire
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: cfg
+ - const: apb
+
+ clocks:
+ description:
+ Fabric Interface Controllers, FICs, are the interface between the FPGA
+ fabric and the core complex on PolarFire SoC. The FICs require two clocks,
+ one from each side of the interface. The "FIC clocks" described by this
+ property are on the core complex side & communication through a FIC is not
+ possible unless it's corresponding clock is enabled. A clock must be
+ enabled for each of the interfaces the root port is connected through.
+ This could in theory be all 4 interfaces, one interface or any combination
+ in between.
+ minItems: 1
+ items:
+ - description: FIC0's clock
+ - description: FIC1's clock
+ - description: FIC2's clock
+ - description: FIC3's clock
+
+ clock-names:
+ description:
+ As any FIC connection combination is possible, the names should match the
+ order in the clocks property and take the form "ficN" where N is a number
+ 0-3
+ minItems: 1
+ maxItems: 4
+ items:
+ pattern: '^fic[0-3]$'
+
+ interrupts:
+ minItems: 1
+ items:
+ - description: PCIe host controller
+ - description: builtin MSI controller
+
+ interrupt-names:
+ minItems: 1
+ items:
+ - const: pcie
+ - const: msi
+
+ ranges:
+ maxItems: 1
+
+ dma-ranges:
+ minItems: 1
+ maxItems: 6
+
+ msi-controller:
+ description: Identifies the node as an MSI controller.
+
+ msi-parent:
+ description: MSI controller the device is capable of using.
+
+ interrupt-controller:
+ type: object
+ properties:
+ '#address-cells':
+ const: 0
+
+ '#interrupt-cells':
+ const: 1
+
+ interrupt-controller: true
+
+ required:
+ - '#address-cells'
+ - '#interrupt-cells'
+ - interrupt-controller
+
+ additionalProperties: false
+
+required:
+ - reg
+ - reg-names
+ - "#interrupt-cells"
+ - interrupts
+ - interrupt-map-mask
+ - interrupt-map
+ - msi-controller
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ pcie0: pcie@2030000000 {
+ compatible = "microchip,pcie-host-1.0";
+ reg = <0x0 0x70000000 0x0 0x08000000>,
+ <0x0 0x43000000 0x0 0x00010000>;
+ reg-names = "cfg", "apb";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupts = <119>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+ <0 0 0 2 &pcie_intc0 1>,
+ <0 0 0 3 &pcie_intc0 2>,
+ <0 0 0 4 &pcie_intc0 3>;
+ interrupt-parent = <&plic0>;
+ msi-parent = <&pcie0>;
+ msi-controller;
+ bus-range = <0x00 0x7f>;
+ ranges = <0x03000000 0x0 0x78000000 0x0 0x78000000 0x0 0x04000000>;
+ pcie_intc0: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt b/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
new file mode 100644
index 0000000000..64156993e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
@@ -0,0 +1,72 @@
+* Mobiveil AXI PCIe Root Port Bridge DT description
+
+Mobiveil's GPEX 4.0 is a PCIe Gen4 root port bridge IP. This configurable IP
+has up to 8 outbound and inbound windows for the address translation.
+
+Required properties:
+- #address-cells: Address representation for root ports, set to <3>
+- #size-cells: Size representation for root ports, set to <2>
+- #interrupt-cells: specifies the number of cells needed to encode an
+ interrupt source. The value must be 1.
+- compatible: Should contain "mbvl,gpex40-pcie"
+- reg: Should contain PCIe registers location and length
+ Mandatory:
+ "config_axi_slave": PCIe controller registers
+ "csr_axi_slave" : Bridge config registers
+ Optional:
+ "gpio_slave" : GPIO registers to control slot power
+ "apb_csr" : MSI registers
+
+- device_type: must be "pci"
+- apio-wins : number of requested apio outbound windows
+ default 2 outbound windows are configured -
+ 1. Config window
+ 2. Memory window
+- ppio-wins : number of requested ppio inbound windows
+ default 1 inbound memory window is configured.
+- bus-range: PCI bus numbers covered
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells: specifies the number of cells needed to encode an
+ interrupt source. The value must be 1.
+- interrupts: The interrupt line of the PCIe controller
+ last cell of this field is set to 4 to
+ denote it as IRQ_TYPE_LEVEL_HIGH type interrupt.
+- interrupt-map-mask,
+ interrupt-map: standard PCI properties to define the mapping of the
+ PCI interface to interrupt numbers.
+- ranges: ranges for the PCI memory regions (I/O space region is not
+ supported by hardware)
+ Please refer to the standard PCI bus binding document for a more
+ detailed explanation
+
+
+Example:
+++++++++
+ pcie0: pcie@a0000000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ compatible = "mbvl,gpex40-pcie";
+ reg = <0xa0000000 0x00001000>,
+ <0xb0000000 0x00010000>,
+ <0xff000000 0x00200000>,
+ <0xb0010000 0x00001000>;
+ reg-names = "config_axi_slave",
+ "csr_axi_slave",
+ "gpio_slave",
+ "apb_csr";
+ device_type = "pci";
+ apio-wins = <2>;
+ ppio-wins = <1>;
+ bus-range = <0x00000000 0x000000ff>;
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ #interrupt-cells = <1>;
+ interrupts = < 0 89 4 >;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 0 &pci_express 0>,
+ <0 0 0 1 &pci_express 1>,
+ <0 0 0 2 &pci_express 2>,
+ <0 0 0 3 &pci_express 3>;
+ ranges = < 0x83000000 0 0x00000000 0xa8000000 0 0x8000000>;
+
+ };
diff --git a/Documentation/devicetree/bindings/pci/mvebu-pci.txt b/Documentation/devicetree/bindings/pci/mvebu-pci.txt
new file mode 100644
index 0000000000..6d022a9d36
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/mvebu-pci.txt
@@ -0,0 +1,310 @@
+* Marvell EBU PCIe interfaces
+
+Mandatory properties:
+
+- compatible: one of the following values:
+ marvell,armada-370-pcie
+ marvell,armada-xp-pcie
+ marvell,dove-pcie
+ marvell,kirkwood-pcie
+- #address-cells, set to <3>
+- #size-cells, set to <2>
+- #interrupt-cells, set to <1>
+- bus-range: PCI bus numbers covered
+- device_type, set to "pci"
+- ranges: ranges describing the MMIO registers to control the PCIe
+ interfaces, and ranges describing the MBus windows needed to access
+ the memory and I/O regions of each PCIe interface.
+- msi-parent: Link to the hardware entity that serves as the Message
+ Signaled Interrupt controller for this PCI controller.
+
+The ranges describing the MMIO registers have the following layout:
+
+ 0x82000000 0 r MBUS_ID(0xf0, 0x01) r 0 s
+
+where:
+
+ * r is a 32-bits value that gives the offset of the MMIO
+ registers of this PCIe interface, from the base of the internal
+ registers.
+
+ * s is a 32-bits value that give the size of this MMIO
+ registers area. This range entry translates the '0x82000000 0 r' PCI
+ address into the 'MBUS_ID(0xf0, 0x01) r' CPU address, which is part
+ of the internal register window (as identified by MBUS_ID(0xf0,
+ 0x01)).
+
+The ranges describing the MBus windows have the following layout:
+
+ 0x8t000000 s 0 MBUS_ID(w, a) 0 1 0
+
+where:
+
+ * t is the type of the MBus window (as defined by the standard PCI DT
+ bindings), 1 for I/O and 2 for memory.
+
+ * s is the PCI slot that corresponds to this PCIe interface
+
+ * w is the 'target ID' value for the MBus window
+
+ * a the 'attribute' value for the MBus window.
+
+Since the location and size of the different MBus windows is not fixed in
+hardware, and only determined in runtime, those ranges cover the full first
+4 GB of the physical address space, and do not translate into a valid CPU
+address.
+
+In addition, the device tree node must have sub-nodes describing each
+PCIe interface, having the following mandatory properties:
+
+- reg: used only for interrupt mapping, so only the first four bytes
+ are used to refer to the correct bus number and device number.
+- assigned-addresses: reference to the MMIO registers used to control
+ this PCIe interface.
+- clocks: the clock associated to this PCIe interface
+- marvell,pcie-port: the physical PCIe port number
+- status: either "disabled" or "okay"
+- device_type, set to "pci"
+- #address-cells, set to <3>
+- #size-cells, set to <2>
+- #interrupt-cells, set to <1>
+- ranges, translating the MBus windows ranges of the parent node into
+ standard PCI addresses.
+- interrupt-map-mask and interrupt-map, standard PCI properties to
+ define the mapping of the PCIe interface to interrupt numbers.
+
+and the following optional properties:
+- marvell,pcie-lane: the physical PCIe lane number, for ports having
+ multiple lanes. If this property is not found, we assume that the
+ value is 0.
+- num-lanes: number of SerDes PCIe lanes for this link (1 or 4)
+- reset-gpios: optional GPIO to PERST#
+- reset-delay-us: delay in us to wait after reset de-assertion, if not
+ specified will default to 100ms, as required by the PCIe specification.
+- interrupt-names: list of interrupt names, supported are:
+ - "intx" - interrupt line triggered by one of the legacy interrupt
+- interrupts or interrupts-extended: List of the interrupt sources which
+ corresponding to the "interrupt-names". If non-empty then also additional
+ 'interrupt-controller' subnode must be defined.
+
+Example:
+
+pcie-controller {
+ compatible = "marvell,armada-xp-pcie";
+ device_type = "pci";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ bus-range = <0x00 0xff>;
+ msi-parent = <&mpic>;
+
+ ranges =
+ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
+ 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */
+ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */
+ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
+ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
+ 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */
+ 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */
+ 0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */
+ 0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */
+ 0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */
+ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
+ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
+ 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */
+ 0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
+ 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */
+ 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
+ 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */
+
+ 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+ 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */
+ 0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
+ 0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */
+ 0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
+ 0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */
+ 0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
+ 0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */
+
+ 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
+ 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */
+
+ 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
+ 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>;
+
+ pcie@1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+ reg = <0x0800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+ 0x81000000 0 0 0x81000000 0x1 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 58>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <0>;
+ num-lanes = <1>;
+ /* low-active PERST# reset on GPIO 25 */
+ reset-gpios = <&gpio0 25 1>;
+ /* wait 20ms for device settle after reset deassertion */
+ reset-delay-us = <20000>;
+ clocks = <&gateclk 5>;
+ };
+
+ pcie@2,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
+ reg = <0x1000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+ 0x81000000 0 0 0x81000000 0x2 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 59>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <1>;
+ num-lanes = <1>;
+ clocks = <&gateclk 6>;
+ };
+
+ pcie@3,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
+ reg = <0x1800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
+ 0x81000000 0 0 0x81000000 0x3 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 60>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <2>;
+ num-lanes = <1>;
+ clocks = <&gateclk 7>;
+ };
+
+ pcie@4,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
+ reg = <0x2000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
+ 0x81000000 0 0 0x81000000 0x4 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 61>;
+ marvell,pcie-port = <0>;
+ marvell,pcie-lane = <3>;
+ num-lanes = <1>;
+ clocks = <&gateclk 8>;
+ };
+
+ pcie@5,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+ reg = <0x2800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+ 0x81000000 0 0 0x81000000 0x5 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 62>;
+ marvell,pcie-port = <1>;
+ marvell,pcie-lane = <0>;
+ num-lanes = <1>;
+ clocks = <&gateclk 9>;
+ };
+
+ pcie@6,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
+ reg = <0x3000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
+ 0x81000000 0 0 0x81000000 0x6 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 63>;
+ marvell,pcie-port = <1>;
+ marvell,pcie-lane = <1>;
+ num-lanes = <1>;
+ clocks = <&gateclk 10>;
+ };
+
+ pcie@7,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
+ reg = <0x3800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
+ 0x81000000 0 0 0x81000000 0x7 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 64>;
+ marvell,pcie-port = <1>;
+ marvell,pcie-lane = <2>;
+ num-lanes = <1>;
+ clocks = <&gateclk 11>;
+ };
+
+ pcie@8,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
+ reg = <0x4000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
+ 0x81000000 0 0 0x81000000 0x8 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 65>;
+ marvell,pcie-port = <1>;
+ marvell,pcie-lane = <3>;
+ num-lanes = <1>;
+ clocks = <&gateclk 12>;
+ };
+
+ pcie@9,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
+ reg = <0x4800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+ 0x81000000 0 0 0x81000000 0x9 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 99>;
+ marvell,pcie-port = <2>;
+ marvell,pcie-lane = <0>;
+ num-lanes = <1>;
+ clocks = <&gateclk 26>;
+ };
+
+ pcie@a,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
+ reg = <0x5000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
+ 0x81000000 0 0 0x81000000 0xa 0 1 0>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &mpic 103>;
+ marvell,pcie-port = <3>;
+ marvell,pcie-lane = <0>;
+ num-lanes = <1>;
+ clocks = <&gateclk 27>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml
new file mode 100644
index 0000000000..a24fb8307d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml
@@ -0,0 +1,319 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/nvidia,tegra194-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra194 (and later) PCIe Endpoint controller (Synopsys DesignWare Core based)
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+ - Vidya Sagar <vidyas@nvidia.com>
+
+description: |
+ This PCIe controller is based on the Synopsys DesignWare PCIe IP and thus
+ inherits all the common properties defined in snps,dw-pcie-ep.yaml. Some
+ of the controller instances are dual mode; they can work either in Root
+ Port mode or Endpoint mode but one at a time.
+
+ On Tegra194, controllers C0, C4 and C5 support Endpoint mode.
+ On Tegra234, controllers C5, C6, C7 and C10 support Endpoint mode.
+
+ Note: On Tegra194's P2972-0000 platform, only C5 controller can be enabled to
+ operate in the Endpoint mode because of the way the platform is designed.
+
+properties:
+ compatible:
+ enum:
+ - nvidia,tegra194-pcie-ep
+ - nvidia,tegra234-pcie-ep
+
+ reg:
+ items:
+ - description: controller's application logic registers
+ - description: iATU and DMA registers. This is where the iATU (internal
+ Address Translation Unit) registers of the PCIe core are made
+ available for software access.
+ - description: aperture where the Root Port's own configuration
+ registers are available.
+ - description: aperture used to map the remote Root Complex address space
+
+ reg-names:
+ items:
+ - const: appl
+ - const: atu_dma
+ - const: dbi
+ - const: addr_space
+
+ interrupts:
+ items:
+ - description: controller interrupt
+
+ interrupt-names:
+ items:
+ - const: intr
+
+ clocks:
+ items:
+ - description: module clock
+
+ clock-names:
+ items:
+ - const: core
+
+ resets:
+ items:
+ - description: APB bus interface reset
+ - description: module reset
+
+ reset-names:
+ items:
+ - const: apb
+ - const: core
+
+ reset-gpios:
+ description: Must contain a phandle to a GPIO controller followed by GPIO
+ that is being used as PERST input signal. Please refer to pci.txt.
+
+ phys:
+ minItems: 1
+ maxItems: 8
+
+ phy-names:
+ minItems: 1
+ items:
+ - const: p2u-0
+ - const: p2u-1
+ - const: p2u-2
+ - const: p2u-3
+ - const: p2u-4
+ - const: p2u-5
+ - const: p2u-6
+ - const: p2u-7
+
+ power-domains:
+ maxItems: 1
+ description: |
+ A phandle to the node that controls power to the respective PCIe
+ controller and a specifier name for the PCIe controller.
+
+ Tegra194 specifiers are defined in "include/dt-bindings/power/tegra194-powergate.h"
+ Tegra234 specifiers are defined in "include/dt-bindings/power/tegra234-powergate.h"
+
+ interconnects:
+ items:
+ - description: memory read client
+ - description: memory write client
+
+ interconnect-names:
+ items:
+ - const: dma-mem # read
+ - const: write
+
+ dma-coherent: true
+
+ nvidia,bpmp:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: |
+ Must contain a pair of phandles to BPMP controller node followed by
+ controller ID. Following are the controller IDs for each controller:
+
+ Tegra194
+
+ 0: C0
+ 1: C1
+ 2: C2
+ 3: C3
+ 4: C4
+ 5: C5
+
+ Tegra234
+
+ 0 : C0
+ 1 : C1
+ 2 : C2
+ 3 : C3
+ 4 : C4
+ 5 : C5
+ 6 : C6
+ 7 : C7
+ 8 : C8
+ 9 : C9
+ 10: C10
+
+ items:
+ - items:
+ - description: phandle to BPMP controller node
+ - description: PCIe controller ID
+ maximum: 10
+
+ nvidia,aspm-cmrt-us:
+ description: Common Mode Restore Time for proper operation of ASPM to be
+ specified in microseconds
+
+ nvidia,aspm-pwr-on-t-us:
+ description: Power On time for proper operation of ASPM to be specified in
+ microseconds
+
+ nvidia,aspm-l0s-entrance-latency-us:
+ description: ASPM L0s entrance latency to be specified in microseconds
+
+ vddio-pex-ctl-supply:
+ description: A phandle to the regulator supply for PCIe side band signals
+
+ nvidia,refclk-select-gpios:
+ maxItems: 1
+ description: GPIO used to enable REFCLK to controller from the host
+
+ nvidia,enable-ext-refclk:
+ description: |
+ This boolean property needs to be present if the controller is configured
+ to receive Reference Clock from the host.
+ NOTE: This is applicable only for Tegra234.
+
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ nvidia,enable-srns:
+ description: |
+ This boolean property needs to be present if the controller is
+ configured to operate in SRNS (Separate Reference Clocks with No
+ Spread-Spectrum Clocking). NOTE: This is applicable only for
+ Tegra234.
+
+ $ref: /schemas/types.yaml#/definitions/flag
+
+allOf:
+ - $ref: /schemas/pci/snps,dw-pcie-ep.yaml#
+
+unevaluatedProperties: false
+
+required:
+ - interrupts
+ - interrupt-names
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - power-domains
+ - reset-gpios
+ - vddio-pex-ctl-supply
+ - num-lanes
+ - phys
+ - phy-names
+ - nvidia,bpmp
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra194-clock.h>
+ #include <dt-bindings/gpio/tegra194-gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/tegra194-powergate.h>
+ #include <dt-bindings/reset/tegra194-reset.h>
+
+ bus@0 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0x8 0x0>;
+
+ pcie-ep@141a0000 {
+ compatible = "nvidia,tegra194-pcie-ep";
+ reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */
+ <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */
+ <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K) */
+ <0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G) */
+ reg-names = "appl", "atu_dma", "dbi", "addr_space";
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+ interrupt-names = "intr";
+
+ clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>;
+ clock-names = "core";
+
+ resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>,
+ <&bpmp TEGRA194_RESET_PEX1_CORE_5>;
+ reset-names = "apb", "core";
+
+ power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&clkreq_c5_bi_dir_state>;
+
+ nvidia,bpmp = <&bpmp 5>;
+
+ nvidia,aspm-cmrt-us = <60>;
+ nvidia,aspm-pwr-on-t-us = <20>;
+ nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+ vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+ reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>;
+
+ nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5)
+ GPIO_ACTIVE_HIGH>;
+
+ num-lanes = <8>;
+
+ phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+ <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+ <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+
+ phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+ "p2u-5", "p2u-6", "p2u-7";
+ };
+ };
+
+ - |
+ #include <dt-bindings/clock/tegra234-clock.h>
+ #include <dt-bindings/gpio/tegra234-gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/tegra234-powergate.h>
+ #include <dt-bindings/reset/tegra234-reset.h>
+
+ bus@0 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0x8 0x0>;
+
+ pcie-ep@141a0000 {
+ compatible = "nvidia,tegra234-pcie-ep";
+ power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8A>;
+ reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */
+ <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */
+ <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K) */
+ <0x27 0x40000000 0x4 0x00000000>; /* Address Space (16G) */
+ reg-names = "appl", "atu_dma", "dbi", "addr_space";
+
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+ interrupt-names = "intr";
+
+ clocks = <&bpmp TEGRA234_CLK_PEX1_C5_CORE>;
+ clock-names = "core";
+
+ resets = <&bpmp TEGRA234_RESET_PEX1_CORE_5_APB>,
+ <&bpmp TEGRA234_RESET_PEX1_CORE_5>;
+ reset-names = "apb", "core";
+
+ nvidia,bpmp = <&bpmp 5>;
+
+ nvidia,enable-ext-refclk;
+ nvidia,aspm-cmrt-us = <60>;
+ nvidia,aspm-pwr-on-t-us = <20>;
+ nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+ vddio-pex-ctl-supply = <&p3701_vdd_1v8_ls>;
+
+ reset-gpios = <&gpio TEGRA234_MAIN_GPIO(AF, 1) GPIO_ACTIVE_LOW>;
+
+ nvidia,refclk-select-gpios = <&gpio_aon
+ TEGRA234_AON_GPIO(AA, 4)
+ GPIO_ACTIVE_HIGH>;
+
+ num-lanes = <8>;
+
+ phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+ <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+ <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+
+ phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+ "p2u-5", "p2u-6", "p2u-7";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml
new file mode 100644
index 0000000000..fe81d52c72
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.yaml
@@ -0,0 +1,380 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/nvidia,tegra194-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra194 (and later) PCIe controller (Synopsys DesignWare Core based)
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+ - Vidya Sagar <vidyas@nvidia.com>
+
+description: |
+ This PCIe controller is based on the Synopsys DesignWare PCIe IP and thus
+ inherits all the common properties defined in snps,dw-pcie.yaml. Some of
+ the controller instances are dual mode where in they can work either in
+ Root Port mode or Endpoint mode but one at a time.
+
+ See nvidia,tegra194-pcie-ep.yaml for details on the Endpoint mode device
+ tree bindings.
+
+properties:
+ compatible:
+ enum:
+ - nvidia,tegra194-pcie
+ - nvidia,tegra234-pcie
+
+ reg:
+ minItems: 4
+ items:
+ - description: controller's application logic registers
+ - description: configuration registers
+ - description: iATU and DMA registers. This is where the iATU (internal
+ Address Translation Unit) registers of the PCIe core are made
+ available for software access.
+ - description: aperture where the Root Port's own configuration
+ registers are available.
+ - description: aperture to access the configuration space through ECAM.
+
+ reg-names:
+ minItems: 4
+ items:
+ - const: appl
+ - const: config
+ - const: atu_dma
+ - const: dbi
+ - const: ecam
+
+ interrupts:
+ items:
+ - description: controller interrupt
+ - description: MSI interrupt
+
+ interrupt-names:
+ items:
+ - const: intr
+ - const: msi
+
+ clocks:
+ items:
+ - description: module clock
+
+ clock-names:
+ items:
+ - const: core
+
+ resets:
+ items:
+ - description: APB bus interface reset
+ - description: module reset
+
+ reset-names:
+ items:
+ - const: apb
+ - const: core
+
+ phys:
+ minItems: 1
+ maxItems: 8
+
+ phy-names:
+ minItems: 1
+ items:
+ - const: p2u-0
+ - const: p2u-1
+ - const: p2u-2
+ - const: p2u-3
+ - const: p2u-4
+ - const: p2u-5
+ - const: p2u-6
+ - const: p2u-7
+
+ power-domains:
+ maxItems: 1
+ description: |
+ A phandle to the node that controls power to the respective PCIe
+ controller and a specifier name for the PCIe controller.
+
+ Tegra194 specifiers defined in "include/dt-bindings/power/tegra194-powergate.h"
+ Tegra234 specifiers defined in "include/dt-bindings/power/tegra234-powergate.h"
+
+ interconnects:
+ items:
+ - description: memory read client
+ - description: memory write client
+
+ interconnect-names:
+ items:
+ - const: dma-mem # read
+ - const: write
+
+ dma-coherent: true
+
+ nvidia,bpmp:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: |
+ Must contain a pair of phandles to BPMP controller node followed by
+ controller ID. Following are the controller IDs for each controller:
+
+ Tegra194
+
+ 0: C0
+ 1: C1
+ 2: C2
+ 3: C3
+ 4: C4
+ 5: C5
+
+ Tegra234
+
+ 0 : C0
+ 1 : C1
+ 2 : C2
+ 3 : C3
+ 4 : C4
+ 5 : C5
+ 6 : C6
+ 7 : C7
+ 8 : C8
+ 9 : C9
+ 10: C10
+
+ items:
+ - items:
+ - description: phandle to BPMP controller node
+ - description: PCIe controller ID
+ maximum: 10
+
+ nvidia,update-fc-fixup:
+ description: |
+ This is a boolean property and needs to be present to improve performance
+ when a platform is designed in such a way that it satisfies at least one
+ of the following conditions thereby enabling Root Port to exchange
+ optimum number of FC (Flow Control) credits with downstream devices:
+
+ NOTE: This is applicable only for Tegra194.
+
+ 1. If C0/C4/C5 run at x1/x2 link widths (irrespective of speed and MPS)
+ 2. If C0/C1/C2/C3/C4/C5 operate at their respective max link widths and
+ a) speed is Gen-2 and MPS is 256B
+ b) speed is >= Gen-3 with any MPS
+
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ nvidia,aspm-cmrt-us:
+ description: Common Mode Restore Time for proper operation of ASPM to be
+ specified in microseconds
+
+ nvidia,aspm-pwr-on-t-us:
+ description: Power On time for proper operation of ASPM to be specified in
+ microseconds
+
+ nvidia,aspm-l0s-entrance-latency-us:
+ description: ASPM L0s entrance latency to be specified in microseconds
+
+ vddio-pex-ctl-supply:
+ description: A phandle to the regulator supply for PCIe side band signals.
+
+ vpcie3v3-supply:
+ description: A phandle to the regulator node that supplies 3.3V to the slot
+ if the platform has one such slot, e.g., x16 slot owned by C5 controller
+ in p2972-0000 platform.
+
+ vpcie12v-supply:
+ description: A phandle to the regulator node that supplies 12V to the slot
+ if the platform has one such slot, e.g., x16 slot owned by C5 controller
+ in p2972-0000 platform.
+
+ nvidia,enable-srns:
+ description: |
+ This boolean property needs to be present if the controller is
+ configured to operate in SRNS (Separate Reference Clocks with No
+ Spread-Spectrum Clocking). NOTE: This is applicable only for
+ Tegra234.
+
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ nvidia,enable-ext-refclk:
+ description: |
+ This boolean property needs to be present if the controller is
+ configured to use the reference clocking coming in from an external
+ clock source instead of using the internal clock source.
+
+ $ref: /schemas/types.yaml#/definitions/flag
+
+allOf:
+ - $ref: /schemas/pci/snps,dw-pcie.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra194-pcie
+ then:
+ properties:
+ reg:
+ maxItems: 4
+ reg-names:
+ maxItems: 4
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - nvidia,tegra234-pcie
+ then:
+ properties:
+ reg:
+ minItems: 5
+ reg-names:
+ minItems: 5
+
+unevaluatedProperties: false
+
+required:
+ - interrupts
+ - interrupt-names
+ - interrupt-map
+ - interrupt-map-mask
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - power-domains
+ - vddio-pex-ctl-supply
+ - num-lanes
+ - phys
+ - phy-names
+ - nvidia,bpmp
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra194-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/tegra194-powergate.h>
+ #include <dt-bindings/reset/tegra194-reset.h>
+
+ bus@0 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0x8 0x0>;
+
+ pcie@14180000 {
+ compatible = "nvidia,tegra194-pcie";
+ power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
+ reg = <0x0 0x14180000 0x0 0x00020000>, /* appl registers (128K) */
+ <0x0 0x38000000 0x0 0x00040000>, /* configuration space (256K) */
+ <0x0 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */
+ <0x0 0x38080000 0x0 0x00040000>; /* DBI reg space (256K) */
+ reg-names = "appl", "config", "atu_dma", "dbi";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ num-lanes = <8>;
+ linux,pci-domain = <0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pex_rst_c5_out_state>, <&clkreq_c5_bi_dir_state>;
+
+ clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>;
+ clock-names = "core";
+
+ resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>,
+ <&bpmp TEGRA194_RESET_PEX0_CORE_0>;
+ reset-names = "apb", "core";
+
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+ interrupt-names = "intr", "msi";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+ nvidia,bpmp = <&bpmp 0>;
+
+ supports-clkreq;
+ nvidia,aspm-cmrt-us = <60>;
+ nvidia,aspm-pwr-on-t-us = <20>;
+ nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x38100000 0x0 0x38100000 0x0 0x00100000>, /* downstream I/O */
+ <0x82000000 0x0 0x38200000 0x0 0x38200000 0x0 0x01e00000>, /* non-prefetch memory */
+ <0xc2000000 0x18 0x00000000 0x18 0x00000000 0x4 0x00000000>; /* prefetchable memory */
+
+ vddio-pex-ctl-supply = <&vdd_1v8ao>;
+ vpcie3v3-supply = <&vdd_3v3_pcie>;
+ vpcie12v-supply = <&vdd_12v_pcie>;
+
+ phys = <&p2u_hsio_2>, <&p2u_hsio_3>, <&p2u_hsio_4>,
+ <&p2u_hsio_5>;
+ phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
+ };
+ };
+
+ - |
+ #include <dt-bindings/clock/tegra234-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/tegra234-powergate.h>
+ #include <dt-bindings/reset/tegra234-reset.h>
+
+ bus@0 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0x8 0x0>;
+
+ pcie@14160000 {
+ compatible = "nvidia,tegra234-pcie";
+ power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4BB>;
+ reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K) */
+ <0x00 0x36000000 0x0 0x00040000>, /* configuration space (256K) */
+ <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */
+ <0x00 0x36080000 0x0 0x00040000>, /* DBI reg space (256K) */
+ <0x24 0x30000000 0x0 0x10000000>; /* ECAM (256MB) */
+ reg-names = "appl", "config", "atu_dma", "dbi", "ecam";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ num-lanes = <4>;
+ num-viewport = <8>;
+ linux,pci-domain = <4>;
+
+ clocks = <&bpmp TEGRA234_CLK_PEX0_C4_CORE>;
+ clock-names = "core";
+
+ resets = <&bpmp TEGRA234_RESET_PEX0_CORE_4_APB>,
+ <&bpmp TEGRA234_RESET_PEX0_CORE_4>;
+ reset-names = "apb", "core";
+
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+ <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+ interrupt-names = "intr", "msi";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+
+ nvidia,bpmp = <&bpmp 4>;
+
+ nvidia,aspm-cmrt-us = <60>;
+ nvidia,aspm-pwr-on-t-us = <20>;
+ nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+ bus-range = <0x0 0xff>;
+ ranges = <0x43000000 0x21 0x40000000 0x21 0x40000000 0x2 0xe8000000>, /* prefetchable */
+ <0x02000000 0x0 0x40000000 0x24 0x28000000 0x0 0x08000000>, /* non-prefetchable */
+ <0x01000000 0x0 0x36100000 0x00 0x36100000 0x0 0x00100000>; /* downstream I/O */
+
+ vddio-pex-ctl-supply = <&p3701_vdd_AO_1v8>;
+
+ phys = <&p2u_hsio_4>, <&p2u_hsio_5>, <&p2u_hsio_6>,
+ <&p2u_hsio_7>;
+ phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
new file mode 100644
index 0000000000..d099f3476c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt
@@ -0,0 +1,670 @@
+NVIDIA Tegra PCIe controller
+
+Required properties:
+- compatible: Must be:
+ - "nvidia,tegra20-pcie": for Tegra20
+ - "nvidia,tegra30-pcie": for Tegra30
+ - "nvidia,tegra124-pcie": for Tegra124 and Tegra132
+ - "nvidia,tegra210-pcie": for Tegra210
+ - "nvidia,tegra186-pcie": for Tegra186
+- power-domains: To ungate power partition by BPMP powergate driver. Must
+ contain BPMP phandle and PCIe power partition ID. This is required only
+ for Tegra186.
+- device_type: Must be "pci"
+- reg: A list of physical base address and length for each set of controller
+ registers. Must contain an entry for each entry in the reg-names property.
+- reg-names: Must include the following entries:
+ "pads": PADS registers
+ "afi": AFI registers
+ "cs": configuration space region
+- interrupts: A list of interrupt outputs of the controller. Must contain an
+ entry for each entry in the interrupt-names property.
+- interrupt-names: Must include the following entries:
+ "intr": The Tegra interrupt that is asserted for controller interrupts
+ "msi": The Tegra interrupt that is asserted when an MSI is received
+- bus-range: Range of bus numbers associated with this controller
+- #address-cells: Address representation for root ports (must be 3)
+ - cell 0 specifies the bus and device numbers of the root port:
+ [23:16]: bus number
+ [15:11]: device number
+ - cell 1 denotes the upper 32 address bits and should be 0
+ - cell 2 contains the lower 32 address bits and is used to translate to the
+ CPU address space
+- #size-cells: Size representation for root ports (must be 2)
+- ranges: Describes the translation of addresses for root ports and standard
+ PCI regions. The entries must be 6 cells each, where the first three cells
+ correspond to the address as described for the #address-cells property
+ above, the fourth cell is the physical CPU address to translate to and the
+ fifth and six cells are as described for the #size-cells property above.
+ - The first two entries are expected to translate the addresses for the root
+ port registers, which are referenced by the assigned-addresses property of
+ the root port nodes (see below).
+ - The remaining entries setup the mapping for the standard I/O, memory and
+ prefetchable PCI regions. The first cell determines the type of region
+ that is setup:
+ - 0x81000000: I/O memory region
+ - 0x82000000: non-prefetchable memory region
+ - 0xc2000000: prefetchable memory region
+ Please refer to the standard PCI bus binding document for a more detailed
+ explanation.
+- #interrupt-cells: Size representation for interrupts (must be 1)
+- interrupt-map-mask and interrupt-map: Standard PCI IRQ mapping properties
+ Please refer to the standard PCI bus binding document for a more detailed
+ explanation.
+- clocks: Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+ - pex
+ - afi
+ - pll_e
+ - cml (not required for Tegra20)
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+ - pex
+ - afi
+ - pcie_x
+
+Optional properties:
+- pinctrl-names: A list of pinctrl state names. Must contain the following
+ entries:
+ - "default": active state, puts PCIe I/O out of deep power down state
+ - "idle": puts PCIe I/O into deep power down state
+- pinctrl-0: phandle for the default/active state of pin configurations.
+- pinctrl-1: phandle for the idle state of pin configurations.
+
+Required properties on Tegra124 and later (deprecated):
+- phys: Must contain an entry for each entry in phy-names.
+- phy-names: Must include the following entries:
+ - pcie
+
+These properties are deprecated in favour of per-lane PHYs define in each of
+the root ports (see below).
+
+Power supplies for Tegra20:
+- avdd-pex-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
+- vdd-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
+- avdd-pex-pll-supply: Power supply for dedicated (internal) PCIe PLL. Must
+ supply 1.05 V.
+- avdd-plle-supply: Power supply for PLLE, which is shared with SATA. Must
+ supply 1.05 V.
+- vddio-pex-clk-supply: Power supply for PCIe clock. Must supply 3.3 V.
+
+Power supplies for Tegra30:
+- Required:
+ - avdd-pex-pll-supply: Power supply for dedicated (internal) PCIe PLL. Must
+ supply 1.05 V.
+ - avdd-plle-supply: Power supply for PLLE, which is shared with SATA. Must
+ supply 1.05 V.
+ - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must
+ supply 1.8 V.
+ - hvdd-pex-supply: High-voltage supply for PCIe I/O and PCIe output clocks.
+ Must supply 3.3 V.
+- Optional:
+ - If lanes 0 to 3 are used:
+ - avdd-pexa-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
+ - vdd-pexa-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
+ - If lanes 4 or 5 are used:
+ - avdd-pexb-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
+ - vdd-pexb-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
+
+Power supplies for Tegra124:
+- Required:
+ - avddio-pex-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
+ - dvddio-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
+ - hvdd-pex-supply: High-voltage supply for PCIe I/O and PCIe output clocks.
+ Must supply 3.3 V.
+ - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must
+ supply 2.8-3.3 V.
+
+Power supplies for Tegra210:
+- Required:
+ - hvddio-pex-supply: High-voltage supply for PCIe I/O and PCIe output
+ clocks. Must supply 1.8 V.
+ - dvddio-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
+ - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must
+ supply 1.8 V.
+
+Power supplies for Tegra186:
+- Required:
+ - dvdd-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
+ - hvdd-pex-pll-supply: High-voltage supply for PLLE (shared with USB3). Must
+ supply 1.8 V.
+ - hvdd-pex-supply: High-voltage supply for PCIe I/O and PCIe output clocks.
+ Must supply 1.8 V.
+ - vddio-pexctl-aud-supply: Power supply for PCIe side band signals. Must
+ supply 1.8 V.
+
+Root ports are defined as subnodes of the PCIe controller node.
+
+Required properties:
+- device_type: Must be "pci"
+- assigned-addresses: Address and size of the port configuration registers
+- reg: PCI bus address of the root port
+- #address-cells: Must be 3
+- #size-cells: Must be 2
+- ranges: Sub-ranges distributed from the PCIe controller node. An empty
+ property is sufficient.
+- nvidia,num-lanes: Number of lanes to use for this port. Valid combinations
+ are:
+ - Root port 0 uses 4 lanes, root port 1 is unused.
+ - Both root ports use 2 lanes.
+
+Required properties for Tegra124 and later:
+- phys: Must contain an phandle to a PHY for each entry in phy-names.
+- phy-names: Must include an entry for each active lane. Note that the number
+ of entries does not have to (though usually will) be equal to the specified
+ number of lanes in the nvidia,num-lanes property. Entries are of the form
+ "pcie-N": where N ranges from 0 to the value specified in nvidia,num-lanes.
+
+Examples:
+=========
+
+Tegra20:
+--------
+
+SoC DTSI:
+
+ pcie-controller@80003000 {
+ compatible = "nvidia,tegra20-pcie";
+ device_type = "pci";
+ reg = <0x80003000 0x00000800 /* PADS registers */
+ 0x80003800 0x00000200 /* AFI registers */
+ 0x90000000 0x10000000>; /* configuration space */
+ reg-names = "pads", "afi", "cs";
+ interrupts = <0 98 0x04 /* controller interrupt */
+ 0 99 0x04>; /* MSI interrupt */
+ interrupt-names = "intr", "msi";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+ bus-range = <0x00 0xff>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x82000000 0 0x80000000 0x80000000 0 0x00001000 /* port 0 registers */
+ 0x82000000 0 0x80001000 0x80001000 0 0x00001000 /* port 1 registers */
+ 0x81000000 0 0 0x82000000 0 0x00010000 /* downstream I/O */
+ 0x82000000 0 0xa0000000 0xa0000000 0 0x10000000 /* non-prefetchable memory */
+ 0xc2000000 0 0xb0000000 0xb0000000 0 0x10000000>; /* prefetchable memory */
+
+ clocks = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 118>;
+ clock-names = "pex", "afi", "pll_e";
+ resets = <&tegra_car 70>, <&tegra_car 72>, <&tegra_car 74>;
+ reset-names = "pex", "afi", "pcie_x";
+ status = "disabled";
+
+ pci@1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x80000000 0 0x1000>;
+ reg = <0x000800 0 0 0 0>;
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges;
+
+ nvidia,num-lanes = <2>;
+ };
+
+ pci@2,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82001000 0 0x80001000 0 0x1000>;
+ reg = <0x001000 0 0 0 0>;
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges;
+
+ nvidia,num-lanes = <2>;
+ };
+ };
+
+Board DTS:
+
+ pcie-controller@80003000 {
+ status = "okay";
+
+ vdd-supply = <&pci_vdd_reg>;
+ pex-clk-supply = <&pci_clk_reg>;
+
+ /* root port 00:01.0 */
+ pci@1,0 {
+ status = "okay";
+
+ /* bridge 01:00.0 (optional) */
+ pci@0,0 {
+ reg = <0x010000 0 0 0 0>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ device_type = "pci";
+
+ /* endpoint 02:00.0 */
+ pci@0,0 {
+ reg = <0x020000 0 0 0 0>;
+ };
+ };
+ };
+ };
+
+Note that devices on the PCI bus are dynamically discovered using PCI's bus
+enumeration and therefore don't need corresponding device nodes in DT. However
+if a device on the PCI bus provides a non-probeable bus such as I2C or SPI,
+device nodes need to be added in order to allow the bus' children to be
+instantiated at the proper location in the operating system's device tree (as
+illustrated by the optional nodes in the example above).
+
+Tegra30:
+--------
+
+SoC DTSI:
+
+ pcie-controller@3000 {
+ compatible = "nvidia,tegra30-pcie";
+ device_type = "pci";
+ reg = <0x00003000 0x00000800 /* PADS registers */
+ 0x00003800 0x00000200 /* AFI registers */
+ 0x10000000 0x10000000>; /* configuration space */
+ reg-names = "pads", "afi", "cs";
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH /* controller interrupt */
+ GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+ interrupt-names = "intr", "msi";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &intc GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+ bus-range = <0x00 0xff>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x82000000 0 0x00000000 0x00000000 0 0x00001000 /* port 0 configuration space */
+ 0x82000000 0 0x00001000 0x00001000 0 0x00001000 /* port 1 configuration space */
+ 0x82000000 0 0x00004000 0x00004000 0 0x00001000 /* port 2 configuration space */
+ 0x81000000 0 0 0x02000000 0 0x00010000 /* downstream I/O */
+ 0x82000000 0 0x20000000 0x20000000 0 0x08000000 /* non-prefetchable memory */
+ 0xc2000000 0 0x28000000 0x28000000 0 0x18000000>; /* prefetchable memory */
+
+ clocks = <&tegra_car TEGRA30_CLK_PCIE>,
+ <&tegra_car TEGRA30_CLK_AFI>,
+ <&tegra_car TEGRA30_CLK_PLL_E>,
+ <&tegra_car TEGRA30_CLK_CML0>;
+ clock-names = "pex", "afi", "pll_e", "cml";
+ resets = <&tegra_car 70>,
+ <&tegra_car 72>,
+ <&tegra_car 74>;
+ reset-names = "pex", "afi", "pcie_x";
+ status = "disabled";
+
+ pci@1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x00000000 0 0x1000>;
+ reg = <0x000800 0 0 0 0>;
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvidia,num-lanes = <2>;
+ };
+
+ pci@2,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82001000 0 0x00001000 0 0x1000>;
+ reg = <0x001000 0 0 0 0>;
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvidia,num-lanes = <2>;
+ };
+
+ pci@3,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82001800 0 0x00004000 0 0x1000>;
+ reg = <0x001800 0 0 0 0>;
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvidia,num-lanes = <2>;
+ };
+ };
+
+Board DTS:
+
+ pcie-controller@3000 {
+ status = "okay";
+
+ avdd-pexa-supply = <&ldo1_reg>;
+ vdd-pexa-supply = <&ldo1_reg>;
+ avdd-pexb-supply = <&ldo1_reg>;
+ vdd-pexb-supply = <&ldo1_reg>;
+ avdd-pex-pll-supply = <&ldo1_reg>;
+ avdd-plle-supply = <&ldo1_reg>;
+ vddio-pex-ctl-supply = <&sys_3v3_reg>;
+ hvdd-pex-supply = <&sys_3v3_pexs_reg>;
+
+ pci@1,0 {
+ status = "okay";
+ };
+
+ pci@3,0 {
+ status = "okay";
+ };
+ };
+
+Tegra124:
+---------
+
+SoC DTSI:
+
+ pcie-controller@1003000 {
+ compatible = "nvidia,tegra124-pcie";
+ device_type = "pci";
+ reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */
+ 0x0 0x01003800 0x0 0x00000800 /* AFI registers */
+ 0x0 0x02000000 0x0 0x10000000>; /* configuration space */
+ reg-names = "pads", "afi", "cs";
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+ interrupt-names = "intr", "msi";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+ bus-range = <0x00 0xff>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000 /* port 0 configuration space */
+ 0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000 /* port 1 configuration space */
+ 0x81000000 0 0x0 0x0 0x12000000 0 0x00010000 /* downstream I/O (64 KiB) */
+ 0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000 /* non-prefetchable memory (208 MiB) */
+ 0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
+
+ clocks = <&tegra_car TEGRA124_CLK_PCIE>,
+ <&tegra_car TEGRA124_CLK_AFI>,
+ <&tegra_car TEGRA124_CLK_PLL_E>,
+ <&tegra_car TEGRA124_CLK_CML0>;
+ clock-names = "pex", "afi", "pll_e", "cml";
+ resets = <&tegra_car 70>,
+ <&tegra_car 72>,
+ <&tegra_car 74>;
+ reset-names = "pex", "afi", "pcie_x";
+ status = "disabled";
+
+ pci@1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
+ reg = <0x000800 0 0 0 0>;
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvidia,num-lanes = <2>;
+ };
+
+ pci@2,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
+ reg = <0x001000 0 0 0 0>;
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvidia,num-lanes = <1>;
+ };
+ };
+
+Board DTS:
+
+ pcie-controller@1003000 {
+ status = "okay";
+
+ avddio-pex-supply = <&vdd_1v05_run>;
+ dvddio-pex-supply = <&vdd_1v05_run>;
+ avdd-pex-pll-supply = <&vdd_1v05_run>;
+ hvdd-pex-supply = <&vdd_3v3_lp0>;
+ hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>;
+ vddio-pex-ctl-supply = <&vdd_3v3_lp0>;
+ avdd-pll-erefe-supply = <&avdd_1v05_run>;
+
+ /* Mini PCIe */
+ pci@1,0 {
+ phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>;
+ phy-names = "pcie-0";
+ status = "okay";
+ };
+
+ /* Gigabit Ethernet */
+ pci@2,0 {
+ phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>;
+ phy-names = "pcie-0";
+ status = "okay";
+ };
+ };
+
+Tegra210:
+---------
+
+SoC DTSI:
+
+ pcie-controller@1003000 {
+ compatible = "nvidia,tegra210-pcie";
+ device_type = "pci";
+ reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */
+ 0x0 0x01003800 0x0 0x00000800 /* AFI registers */
+ 0x0 0x02000000 0x0 0x10000000>; /* configuration space */
+ reg-names = "pads", "afi", "cs";
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+ interrupt-names = "intr", "msi";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+ bus-range = <0x00 0xff>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000 /* port 0 configuration space */
+ 0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000 /* port 1 configuration space */
+ 0x81000000 0 0x0 0x0 0x12000000 0 0x00010000 /* downstream I/O (64 KiB) */
+ 0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000 /* non-prefetchable memory (208 MiB) */
+ 0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
+
+ clocks = <&tegra_car TEGRA210_CLK_PCIE>,
+ <&tegra_car TEGRA210_CLK_AFI>,
+ <&tegra_car TEGRA210_CLK_PLL_E>,
+ <&tegra_car TEGRA210_CLK_CML0>;
+ clock-names = "pex", "afi", "pll_e", "cml";
+ resets = <&tegra_car 70>,
+ <&tegra_car 72>,
+ <&tegra_car 74>;
+ reset-names = "pex", "afi", "pcie_x";
+ status = "disabled";
+
+ pci@1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
+ reg = <0x000800 0 0 0 0>;
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvidia,num-lanes = <4>;
+ };
+
+ pci@2,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>;
+ reg = <0x001000 0 0 0 0>;
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvidia,num-lanes = <1>;
+ };
+ };
+
+Board DTS:
+
+ pcie-controller@1003000 {
+ status = "okay";
+
+ avdd-pll-uerefe-supply = <&avdd_1v05_pll>;
+ hvddio-pex-supply = <&vdd_1v8>;
+ dvddio-pex-supply = <&vdd_pex_1v05>;
+ dvdd-pex-pll-supply = <&vdd_pex_1v05>;
+ hvdd-pex-pll-e-supply = <&vdd_1v8>;
+ vddio-pex-ctl-supply = <&vdd_1v8>;
+
+ pci@1,0 {
+ phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>,
+ <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>,
+ <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>,
+ <&{/padctl@7009f000/pads/pcie/lanes/pcie-3}>;
+ phy-names = "pcie-0", "pcie-1", "pcie-2", "pcie-3";
+ status = "okay";
+ };
+
+ pci@2,0 {
+ phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>;
+ phy-names = "pcie-0";
+ status = "okay";
+ };
+ };
+
+Tegra186:
+---------
+
+SoC DTSI:
+
+ pcie@10003000 {
+ compatible = "nvidia,tegra186-pcie";
+ power-domains = <&bpmp TEGRA186_POWER_DOMAIN_PCX>;
+ device_type = "pci";
+ reg = <0x0 0x10003000 0x0 0x00000800 /* PADS registers */
+ 0x0 0x10003800 0x0 0x00000800 /* AFI registers */
+ 0x0 0x40000000 0x0 0x10000000>; /* configuration space */
+ reg-names = "pads", "afi", "cs";
+
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+ interrupt-names = "intr", "msi";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+ bus-range = <0x00 0xff>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x82000000 0 0x10000000 0x0 0x10000000 0 0x00001000 /* port 0 configuration space */
+ 0x82000000 0 0x10001000 0x0 0x10001000 0 0x00001000 /* port 1 configuration space */
+ 0x82000000 0 0x10004000 0x0 0x10004000 0 0x00001000 /* port 2 configuration space */
+ 0x81000000 0 0x0 0x0 0x50000000 0 0x00010000 /* downstream I/O (64 KiB) */
+ 0x82000000 0 0x50100000 0x0 0x50100000 0 0x07F00000 /* non-prefetchable memory (127 MiB) */
+ 0xc2000000 0 0x58000000 0x0 0x58000000 0 0x28000000>; /* prefetchable memory (640 MiB) */
+
+ clocks = <&bpmp TEGRA186_CLK_AFI>,
+ <&bpmp TEGRA186_CLK_PCIE>,
+ <&bpmp TEGRA186_CLK_PLLE>;
+ clock-names = "afi", "pex", "pll_e";
+
+ resets = <&bpmp TEGRA186_RESET_AFI>,
+ <&bpmp TEGRA186_RESET_PCIE>,
+ <&bpmp TEGRA186_RESET_PCIEXCLK>;
+ reset-names = "afi", "pex", "pcie_x";
+
+ status = "disabled";
+
+ pci@1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x10000000 0 0x1000>;
+ reg = <0x000800 0 0 0 0>;
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvidia,num-lanes = <2>;
+ };
+
+ pci@2,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82001000 0 0x10001000 0 0x1000>;
+ reg = <0x001000 0 0 0 0>;
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvidia,num-lanes = <1>;
+ };
+
+ pci@3,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82001800 0 0x10004000 0 0x1000>;
+ reg = <0x001800 0 0 0 0>;
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvidia,num-lanes = <1>;
+ };
+ };
+
+Board DTS:
+
+ pcie@10003000 {
+ status = "okay";
+
+ dvdd-pex-supply = <&vdd_pex>;
+ hvdd-pex-pll-supply = <&vdd_1v8>;
+ hvdd-pex-supply = <&vdd_1v8>;
+ vddio-pexctl-aud-supply = <&vdd_1v8>;
+
+ pci@1,0 {
+ nvidia,num-lanes = <4>;
+ status = "okay";
+ };
+
+ pci@2,0 {
+ nvidia,num-lanes = <0>;
+ status = "disabled";
+ };
+
+ pci@3,0 {
+ nvidia,num-lanes = <1>;
+ status = "disabled";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/pci-armada8k.txt b/Documentation/devicetree/bindings/pci/pci-armada8k.txt
new file mode 100644
index 0000000000..ff25a134be
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/pci-armada8k.txt
@@ -0,0 +1,48 @@
+* Marvell Armada 7K/8K PCIe interface
+
+This PCIe host controller is based on the Synopsys DesignWare PCIe IP
+and thus inherits all the common properties defined in snps,dw-pcie.yaml.
+
+Required properties:
+- compatible: "marvell,armada8k-pcie"
+- reg: must contain two register regions
+ - the control register region
+ - the config space region
+- reg-names:
+ - "ctrl" for the control register region
+ - "config" for the config space region
+- interrupts: Interrupt specifier for the PCIe controller
+- clocks: reference to the PCIe controller clocks
+- clock-names: mandatory if there is a second clock, in this case the
+ name must be "core" for the first clock and "reg" for the second
+ one
+
+Optional properties:
+- phys: phandle(s) to PHY node(s) following the generic PHY bindings.
+ Either 1, 2 or 4 PHYs might be needed depending on the number of
+ PCIe lanes.
+- phy-names: names of the PHYs corresponding to the number of lanes.
+ Must be "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy" for
+ 2 PHYs.
+
+Example:
+
+ pcie@f2600000 {
+ compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+ reg = <0 0xf2600000 0 0x10000>, <0 0xf6f00000 0 0x80000>;
+ reg-names = "ctrl", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ dma-coherent;
+
+ bus-range = <0 0xff>;
+ ranges = <0x81000000 0 0xf9000000 0 0xf9000000 0 0x10000 /* downstream I/O */
+ 0x82000000 0 0xf6000000 0 0xf6000000 0 0xf00000>; /* non-prefetchable memory */
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ num-lanes = <1>;
+ clocks = <&cpm_syscon0 1 13>;
+ };
diff --git a/Documentation/devicetree/bindings/pci/pci-ep.yaml b/Documentation/devicetree/bindings/pci/pci-ep.yaml
new file mode 100644
index 0000000000..d1eef48252
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/pci-ep.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/pci-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PCI Endpoint Controller
+
+description: |
+ Common properties for PCI Endpoint Controller Nodes.
+
+maintainers:
+ - Kishon Vijay Abraham I <kishon@ti.com>
+
+properties:
+ $nodename:
+ pattern: "^pcie-ep@"
+
+ max-functions:
+ description: Maximum number of functions that can be configured
+ $ref: /schemas/types.yaml#/definitions/uint8
+ minimum: 1
+ default: 1
+ maximum: 255
+
+ max-virtual-functions:
+ description: Array representing the number of virtual functions corresponding to each physical
+ function
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ minItems: 1
+ maxItems: 255
+
+ max-link-speed:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 1, 2, 3, 4 ]
+
+ num-lanes:
+ description: maximum number of lanes
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ default: 1
+ maximum: 16
+
+required:
+ - compatible
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/pci/pci-iommu.txt b/Documentation/devicetree/bindings/pci/pci-iommu.txt
new file mode 100644
index 0000000000..0def586fdc
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/pci-iommu.txt
@@ -0,0 +1,171 @@
+This document describes the generic device tree binding for describing the
+relationship between PCI(e) devices and IOMMU(s).
+
+Each PCI(e) device under a root complex is uniquely identified by its Requester
+ID (AKA RID). A Requester ID is a triplet of a Bus number, Device number, and
+Function number.
+
+For the purpose of this document, when treated as a numeric value, a RID is
+formatted such that:
+
+* Bits [15:8] are the Bus number.
+* Bits [7:3] are the Device number.
+* Bits [2:0] are the Function number.
+* Any other bits required for padding must be zero.
+
+IOMMUs may distinguish PCI devices through sideband data derived from the
+Requester ID. While a given PCI device can only master through one IOMMU, a
+root complex may split masters across a set of IOMMUs (e.g. with one IOMMU per
+bus).
+
+The generic 'iommus' property is insufficient to describe this relationship,
+and a mechanism is required to map from a PCI device to its IOMMU and sideband
+data.
+
+For generic IOMMU bindings, see
+Documentation/devicetree/bindings/iommu/iommu.txt.
+
+
+PCI root complex
+================
+
+Optional properties
+-------------------
+
+- iommu-map: Maps a Requester ID to an IOMMU and associated IOMMU specifier
+ data.
+
+ The property is an arbitrary number of tuples of
+ (rid-base,iommu,iommu-base,length).
+
+ Any RID r in the interval [rid-base, rid-base + length) is associated with
+ the listed IOMMU, with the IOMMU specifier (r - rid-base + iommu-base).
+
+- iommu-map-mask: A mask to be applied to each Requester ID prior to being
+ mapped to an IOMMU specifier per the iommu-map property.
+
+
+Example (1)
+===========
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ iommu: iommu@a {
+ reg = <0xa 0x1>;
+ compatible = "vendor,some-iommu";
+ #iommu-cells = <1>;
+ };
+
+ pci: pci@f {
+ reg = <0xf 0x1>;
+ compatible = "vendor,pcie-root-complex";
+ device_type = "pci";
+
+ /*
+ * The sideband data provided to the IOMMU is the RID,
+ * identity-mapped.
+ */
+ iommu-map = <0x0 &iommu 0x0 0x10000>;
+ };
+};
+
+
+Example (2)
+===========
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ iommu: iommu@a {
+ reg = <0xa 0x1>;
+ compatible = "vendor,some-iommu";
+ #iommu-cells = <1>;
+ };
+
+ pci: pci@f {
+ reg = <0xf 0x1>;
+ compatible = "vendor,pcie-root-complex";
+ device_type = "pci";
+
+ /*
+ * The sideband data provided to the IOMMU is the RID with the
+ * function bits masked out.
+ */
+ iommu-map = <0x0 &iommu 0x0 0x10000>;
+ iommu-map-mask = <0xfff8>;
+ };
+};
+
+
+Example (3)
+===========
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ iommu: iommu@a {
+ reg = <0xa 0x1>;
+ compatible = "vendor,some-iommu";
+ #iommu-cells = <1>;
+ };
+
+ pci: pci@f {
+ reg = <0xf 0x1>;
+ compatible = "vendor,pcie-root-complex";
+ device_type = "pci";
+
+ /*
+ * The sideband data provided to the IOMMU is the RID,
+ * but the high bits of the bus number are flipped.
+ */
+ iommu-map = <0x0000 &iommu 0x8000 0x8000>,
+ <0x8000 &iommu 0x0000 0x8000>;
+ };
+};
+
+
+Example (4)
+===========
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ iommu_a: iommu@a {
+ reg = <0xa 0x1>;
+ compatible = "vendor,some-iommu";
+ #iommu-cells = <1>;
+ };
+
+ iommu_b: iommu@b {
+ reg = <0xb 0x1>;
+ compatible = "vendor,some-iommu";
+ #iommu-cells = <1>;
+ };
+
+ iommu_c: iommu@c {
+ reg = <0xc 0x1>;
+ compatible = "vendor,some-iommu";
+ #iommu-cells = <1>;
+ };
+
+ pci: pci@f {
+ reg = <0xf 0x1>;
+ compatible = "vendor,pcie-root-complex";
+ device_type = "pci";
+
+ /*
+ * Devices with bus number 0-127 are mastered via IOMMU
+ * a, with sideband data being RID[14:0].
+ * Devices with bus number 128-255 are mastered via
+ * IOMMU b, with sideband data being RID[14:0].
+ * No devices master via IOMMU c.
+ */
+ iommu-map = <0x0000 &iommu_a 0x0000 0x8000>,
+ <0x8000 &iommu_b 0x0000 0x8000>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/pci/pci-msi.txt b/Documentation/devicetree/bindings/pci/pci-msi.txt
new file mode 100644
index 0000000000..b73d839657
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/pci-msi.txt
@@ -0,0 +1,220 @@
+This document describes the generic device tree binding for describing the
+relationship between PCI devices and MSI controllers.
+
+Each PCI device under a root complex is uniquely identified by its Requester ID
+(AKA RID). A Requester ID is a triplet of a Bus number, Device number, and
+Function number.
+
+For the purpose of this document, when treated as a numeric value, a RID is
+formatted such that:
+
+* Bits [15:8] are the Bus number.
+* Bits [7:3] are the Device number.
+* Bits [2:0] are the Function number.
+* Any other bits required for padding must be zero.
+
+MSIs may be distinguished in part through the use of sideband data accompanying
+writes. In the case of PCI devices, this sideband data may be derived from the
+Requester ID. A mechanism is required to associate a device with both the MSI
+controllers it can address, and the sideband data that will be associated with
+its writes to those controllers.
+
+For generic MSI bindings, see
+Documentation/devicetree/bindings/interrupt-controller/msi.txt.
+
+
+PCI root complex
+================
+
+Optional properties
+-------------------
+
+- msi-map: Maps a Requester ID to an MSI controller and associated
+ msi-specifier data. The property is an arbitrary number of tuples of
+ (rid-base,msi-controller,msi-base,length), where:
+
+ * rid-base is a single cell describing the first RID matched by the entry.
+
+ * msi-controller is a single phandle to an MSI controller
+
+ * msi-base is an msi-specifier describing the msi-specifier produced for the
+ first RID matched by the entry.
+
+ * length is a single cell describing how many consecutive RIDs are matched
+ following the rid-base.
+
+ Any RID r in the interval [rid-base, rid-base + length) is associated with
+ the listed msi-controller, with the msi-specifier (r - rid-base + msi-base).
+
+- msi-map-mask: A mask to be applied to each Requester ID prior to being mapped
+ to an msi-specifier per the msi-map property.
+
+- msi-parent: Describes the MSI parent of the root complex itself. Where
+ the root complex and MSI controller do not pass sideband data with MSI
+ writes, this property may be used to describe the MSI controller(s)
+ used by PCI devices under the root complex, if defined as such in the
+ binding for the root complex.
+
+
+Example (1)
+===========
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ msi: msi-controller@a {
+ reg = <0xa 0x1>;
+ compatible = "vendor,some-controller";
+ msi-controller;
+ #msi-cells = <1>;
+ };
+
+ pci: pci@f {
+ reg = <0xf 0x1>;
+ compatible = "vendor,pcie-root-complex";
+ device_type = "pci";
+
+ /*
+ * The sideband data provided to the MSI controller is
+ * the RID, identity-mapped.
+ */
+ msi-map = <0x0 &msi_a 0x0 0x10000>,
+ };
+};
+
+
+Example (2)
+===========
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ msi: msi-controller@a {
+ reg = <0xa 0x1>;
+ compatible = "vendor,some-controller";
+ msi-controller;
+ #msi-cells = <1>;
+ };
+
+ pci: pci@f {
+ reg = <0xf 0x1>;
+ compatible = "vendor,pcie-root-complex";
+ device_type = "pci";
+
+ /*
+ * The sideband data provided to the MSI controller is
+ * the RID, masked to only the device and function bits.
+ */
+ msi-map = <0x0 &msi_a 0x0 0x100>,
+ msi-map-mask = <0xff>
+ };
+};
+
+
+Example (3)
+===========
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ msi: msi-controller@a {
+ reg = <0xa 0x1>;
+ compatible = "vendor,some-controller";
+ msi-controller;
+ #msi-cells = <1>;
+ };
+
+ pci: pci@f {
+ reg = <0xf 0x1>;
+ compatible = "vendor,pcie-root-complex";
+ device_type = "pci";
+
+ /*
+ * The sideband data provided to the MSI controller is
+ * the RID, but the high bit of the bus number is
+ * ignored.
+ */
+ msi-map = <0x0000 &msi 0x0000 0x8000>,
+ <0x8000 &msi 0x0000 0x8000>;
+ };
+};
+
+
+Example (4)
+===========
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ msi: msi-controller@a {
+ reg = <0xa 0x1>;
+ compatible = "vendor,some-controller";
+ msi-controller;
+ #msi-cells = <1>;
+ };
+
+ pci: pci@f {
+ reg = <0xf 0x1>;
+ compatible = "vendor,pcie-root-complex";
+ device_type = "pci";
+
+ /*
+ * The sideband data provided to the MSI controller is
+ * the RID, but the high bit of the bus number is
+ * negated.
+ */
+ msi-map = <0x0000 &msi 0x8000 0x8000>,
+ <0x8000 &msi 0x0000 0x8000>;
+ };
+};
+
+
+Example (5)
+===========
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ msi_a: msi-controller@a {
+ reg = <0xa 0x1>;
+ compatible = "vendor,some-controller";
+ msi-controller;
+ #msi-cells = <1>;
+ };
+
+ msi_b: msi-controller@b {
+ reg = <0xb 0x1>;
+ compatible = "vendor,some-controller";
+ msi-controller;
+ #msi-cells = <1>;
+ };
+
+ msi_c: msi-controller@c {
+ reg = <0xc 0x1>;
+ compatible = "vendor,some-controller";
+ msi-controller;
+ #msi-cells = <1>;
+ };
+
+ pci: pci@f {
+ reg = <0xf 0x1>;
+ compatible = "vendor,pcie-root-complex";
+ device_type = "pci";
+
+ /*
+ * The sideband data provided to MSI controller a is the
+ * RID, but the high bit of the bus number is negated.
+ * The sideband data provided to MSI controller b is the
+ * RID, identity-mapped.
+ * MSI controller c is not addressable.
+ */
+ msi-map = <0x0000 &msi_a 0x8000 0x08000>,
+ <0x8000 &msi_a 0x0000 0x08000>,
+ <0x0000 &msi_b 0x0000 0x10000>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/pci/pci.txt b/Documentation/devicetree/bindings/pci/pci.txt
new file mode 100644
index 0000000000..6a8f2874a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/pci.txt
@@ -0,0 +1,84 @@
+PCI bus bridges have standardized Device Tree bindings:
+
+PCI Bus Binding to: IEEE Std 1275-1994
+https://www.devicetree.org/open-firmware/bindings/pci/pci2_1.pdf
+
+And for the interrupt mapping part:
+
+Open Firmware Recommended Practice: Interrupt Mapping
+https://www.devicetree.org/open-firmware/practice/imap/imap0_9d.pdf
+
+Additionally to the properties specified in the above standards a host bridge
+driver implementation may support the following properties:
+
+- linux,pci-domain:
+ If present this property assigns a fixed PCI domain number to a host bridge,
+ otherwise an unstable (across boots) unique number will be assigned.
+ It is required to either not set this property at all or set it for all
+ host bridges in the system, otherwise potentially conflicting domain numbers
+ may be assigned to root buses behind different host bridges. The domain
+ number for each host bridge in the system must be unique.
+- max-link-speed:
+ If present this property specifies PCI gen for link capability. Host
+ drivers could add this as a strategy to avoid unnecessary operation for
+ unsupported link speed, for instance, trying to do training for
+ unsupported link speed, etc. Must be '4' for gen4, '3' for gen3, '2'
+ for gen2, and '1' for gen1. Any other values are invalid.
+- reset-gpios:
+ If present this property specifies PERST# GPIO. Host drivers can parse the
+ GPIO and apply fundamental reset to endpoints.
+- supports-clkreq:
+ If present this property specifies that CLKREQ signal routing exists from
+ root port to downstream device and host bridge drivers can do programming
+ which depends on CLKREQ signal existence. For example, programming root port
+ not to advertise ASPM L1 Sub-States support if there is no CLKREQ signal.
+
+PCI-PCI Bridge properties
+-------------------------
+
+PCIe root ports and switch ports may be described explicitly in the device
+tree, as children of the host bridge node. Even though those devices are
+discoverable by probing, it might be necessary to describe properties that
+aren't provided by standard PCIe capabilities.
+
+Required properties:
+
+- reg:
+ Identifies the PCI-PCI bridge. As defined in the IEEE Std 1275-1994
+ document, it is a five-cell address encoded as (phys.hi phys.mid
+ phys.lo size.hi size.lo). phys.hi should contain the device's BDF as
+ 0b00000000 bbbbbbbb dddddfff 00000000. The other cells should be zero.
+
+ The bus number is defined by firmware, through the standard bridge
+ configuration mechanism. If this port is a switch port, then firmware
+ allocates the bus number and writes it into the Secondary Bus Number
+ register of the bridge directly above this port. Otherwise, the bus
+ number of a root port is the first number in the bus-range property,
+ defaulting to zero.
+
+ If firmware leaves the ARI Forwarding Enable bit set in the bridge
+ above this port, then phys.hi contains the 8-bit function number as
+ 0b00000000 bbbbbbbb ffffffff 00000000. Note that the PCIe specification
+ recommends that firmware only leaves ARI enabled when it knows that the
+ OS is ARI-aware.
+
+Optional properties:
+
+- external-facing:
+ When present, the port is external-facing. All bridges and endpoints
+ downstream of this port are external to the machine. The OS can, for
+ example, use this information to identify devices that cannot be
+ trusted with relaxed DMA protection, as users could easily attach
+ malicious devices to this port.
+
+Example:
+
+pcie@10000000 {
+ compatible = "pci-host-ecam-generic";
+ ...
+ pcie@0008 {
+ /* Root port 00:01.0 is external-facing */
+ reg = <0x00000800 0 0 0 0>;
+ external-facing;
+ };
+};
diff --git a/Documentation/devicetree/bindings/pci/pcie-al.txt b/Documentation/devicetree/bindings/pci/pcie-al.txt
new file mode 100644
index 0000000000..2ad1fe466e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/pcie-al.txt
@@ -0,0 +1,46 @@
+* Amazon Annapurna Labs PCIe host bridge
+
+Amazon's Annapurna Labs PCIe Host Controller is based on the Synopsys DesignWare
+PCI core. It inherits common properties defined in
+Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
+
+Properties of the host controller node that differ from it are:
+
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Definition: Value should contain
+ - "amazon,al-alpine-v2-pcie" for alpine_v2
+ - "amazon,al-alpine-v3-pcie" for alpine_v3
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: Register ranges as listed in the reg-names property
+
+- reg-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: Must include the following entries
+ - "config" PCIe ECAM space
+ - "controller" AL proprietary registers
+ - "dbi" Designware PCIe registers
+
+Example:
+
+ pcie-external0: pcie@fb600000 {
+ compatible = "amazon,al-alpine-v3-pcie";
+ reg = <0x0 0xfb600000 0x0 0x00100000
+ 0x0 0xfd800000 0x0 0x00010000
+ 0x0 0xfd810000 0x0 0x00001000>;
+ reg-names = "config", "controller", "dbi";
+ bus-range = <0 255>;
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0x00 0 0 7>;
+ interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; /* INTa */
+ ranges = <0x02000000 0x0 0xc0010000 0x0 0xc0010000 0x0 0x07ff0000>;
+ };
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
new file mode 100644
index 0000000000..a223ce029c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
@@ -0,0 +1,223 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PCIe Endpoint Controller
+
+maintainers:
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - qcom,sdx55-pcie-ep
+ - qcom,sm8450-pcie-ep
+ - items:
+ - const: qcom,sdx65-pcie-ep
+ - const: qcom,sdx55-pcie-ep
+
+ reg:
+ items:
+ - description: Qualcomm-specific PARF configuration registers
+ - description: DesignWare PCIe registers
+ - description: External local bus interface registers
+ - description: Address Translation Unit (ATU) registers
+ - description: Memory region used to map remote RC address space
+ - description: BAR memory region
+
+ reg-names:
+ items:
+ - const: parf
+ - const: dbi
+ - const: elbi
+ - const: atu
+ - const: addr_space
+ - const: mmio
+
+ clocks:
+ minItems: 7
+ maxItems: 8
+
+ clock-names:
+ minItems: 7
+ maxItems: 8
+
+ qcom,perst-regs:
+ description: Reference to a syscon representing TCSR followed by the two
+ offsets within syscon for Perst enable and Perst separation
+ enable registers
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: Syscon to TCSR system registers
+ - description: Perst enable offset
+ - description: Perst separation enable offset
+
+ interrupts:
+ items:
+ - description: PCIe Global interrupt
+ - description: PCIe Doorbell interrupt
+
+ interrupt-names:
+ items:
+ - const: global
+ - const: doorbell
+
+ reset-gpios:
+ description: GPIO used as PERST# input signal
+ maxItems: 1
+
+ wake-gpios:
+ description: GPIO used as WAKE# output signal
+ maxItems: 1
+
+ interconnects:
+ maxItems: 2
+
+ interconnect-names:
+ items:
+ - const: pcie-mem
+ - const: cpu-pcie
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: core
+
+ power-domains:
+ maxItems: 1
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ const: pciephy
+
+ num-lanes:
+ default: 2
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - interrupts
+ - interrupt-names
+ - reset-gpios
+ - interconnects
+ - interconnect-names
+ - resets
+ - reset-names
+ - power-domains
+
+allOf:
+ - $ref: pci-ep.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sdx55-pcie-ep
+ then:
+ properties:
+ clocks:
+ items:
+ - description: PCIe Auxiliary clock
+ - description: PCIe CFG AHB clock
+ - description: PCIe Master AXI clock
+ - description: PCIe Slave AXI clock
+ - description: PCIe Slave Q2A AXI clock
+ - description: PCIe Sleep clock
+ - description: PCIe Reference clock
+ clock-names:
+ items:
+ - const: aux
+ - const: cfg
+ - const: bus_master
+ - const: bus_slave
+ - const: slave_q2a
+ - const: sleep
+ - const: ref
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sm8450-pcie-ep
+ then:
+ properties:
+ clocks:
+ items:
+ - description: PCIe Auxiliary clock
+ - description: PCIe CFG AHB clock
+ - description: PCIe Master AXI clock
+ - description: PCIe Slave AXI clock
+ - description: PCIe Slave Q2A AXI clock
+ - description: PCIe Reference clock
+ - description: PCIe DDRSS SF TBU clock
+ - description: PCIe AGGRE NOC AXI clock
+ clock-names:
+ items:
+ - const: aux
+ - const: cfg
+ - const: bus_master
+ - const: bus_slave
+ - const: slave_q2a
+ - const: ref
+ - const: ddrss_sf_tbu
+ - const: aggre_noc_axi
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sdx55.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interconnect/qcom,sdx55.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ pcie_ep: pcie-ep@1c00000 {
+ compatible = "qcom,sdx55-pcie-ep";
+ reg = <0x01c00000 0x3000>,
+ <0x40000000 0xf1d>,
+ <0x40000f20 0xc8>,
+ <0x40001000 0x1000>,
+ <0x40002000 0x1000>,
+ <0x01c03000 0x3000>;
+ reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
+ "mmio";
+
+ clocks = <&gcc GCC_PCIE_AUX_CLK>,
+ <&gcc GCC_PCIE_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_PCIE_SLEEP_CLK>,
+ <&gcc GCC_PCIE_0_CLKREF_CLK>;
+ clock-names = "aux", "cfg", "bus_master", "bus_slave",
+ "slave_q2a", "sleep", "ref";
+
+ qcom,perst-regs = <&tcsr 0xb258 0xb270>;
+
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "global", "doorbell";
+ interconnects = <&system_noc MASTER_PCIE &mc_virt SLAVE_EBI_CH0>,
+ <&mem_noc MASTER_AMPSS_M0 &system_noc SLAVE_PCIE_0>;
+ interconnect-names = "pcie-mem", "cpu-pcie";
+ reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>;
+ resets = <&gcc GCC_PCIE_BCR>;
+ reset-names = "core";
+ power-domains = <&gcc PCIE_GDSC>;
+ phys = <&pcie0_lane>;
+ phy-names = "pciephy";
+ max-link-speed = <3>;
+ num-lanes = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
new file mode 100644
index 0000000000..eadba38171
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
@@ -0,0 +1,981 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PCI express root complex
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description: |
+ Qualcomm PCIe root complex controller is based on the Synopsys DesignWare
+ PCIe IP.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - qcom,pcie-apq8064
+ - qcom,pcie-apq8084
+ - qcom,pcie-ipq4019
+ - qcom,pcie-ipq6018
+ - qcom,pcie-ipq8064
+ - qcom,pcie-ipq8064-v2
+ - qcom,pcie-ipq8074
+ - qcom,pcie-ipq8074-gen3
+ - qcom,pcie-msm8996
+ - qcom,pcie-qcs404
+ - qcom,pcie-sa8540p
+ - qcom,pcie-sa8775p
+ - qcom,pcie-sc7280
+ - qcom,pcie-sc8180x
+ - qcom,pcie-sc8280xp
+ - qcom,pcie-sdm845
+ - qcom,pcie-sdx55
+ - qcom,pcie-sm8150
+ - qcom,pcie-sm8250
+ - qcom,pcie-sm8350
+ - qcom,pcie-sm8450-pcie0
+ - qcom,pcie-sm8450-pcie1
+ - qcom,pcie-sm8550
+ - items:
+ - const: qcom,pcie-msm8998
+ - const: qcom,pcie-msm8996
+
+ reg:
+ minItems: 4
+ maxItems: 6
+
+ reg-names:
+ minItems: 4
+ maxItems: 6
+
+ interrupts:
+ minItems: 1
+ maxItems: 8
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 8
+
+ iommu-map:
+ maxItems: 2
+
+ # Common definitions for clocks, clock-names and reset.
+ # Platform constraints are described later.
+ clocks:
+ minItems: 3
+ maxItems: 13
+
+ clock-names:
+ minItems: 3
+ maxItems: 13
+
+ dma-coherent: true
+
+ interconnects:
+ maxItems: 2
+
+ interconnect-names:
+ items:
+ - const: pcie-mem
+ - const: cpu-pcie
+
+ resets:
+ minItems: 1
+ maxItems: 12
+
+ resets-names:
+ minItems: 1
+ maxItems: 12
+
+ vdda-supply:
+ description: A phandle to the core analog power supply
+
+ vdda_phy-supply:
+ description: A phandle to the core analog power supply for PHY
+
+ vdda_refclk-supply:
+ description: A phandle to the core analog power supply for IC which generates reference clock
+
+ vddpe-3v3-supply:
+ description: A phandle to the PCIe endpoint power supply
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ items:
+ - const: pciephy
+
+ power-domains:
+ maxItems: 1
+
+ perst-gpios:
+ description: GPIO controlled connection to PERST# signal
+ maxItems: 1
+
+ wake-gpios:
+ description: GPIO controlled connection to WAKE# signal
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupt-map-mask
+ - interrupt-map
+ - clocks
+ - clock-names
+
+anyOf:
+ - required:
+ - interrupts
+ - interrupt-names
+ - "#interrupt-cells"
+ - required:
+ - msi-map
+ - msi-map-mask
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pcie-apq8064
+ - qcom,pcie-ipq4019
+ - qcom,pcie-ipq8064
+ - qcom,pcie-ipq8064v2
+ - qcom,pcie-ipq8074
+ - qcom,pcie-qcs404
+ then:
+ properties:
+ reg:
+ minItems: 4
+ maxItems: 4
+ reg-names:
+ items:
+ - const: dbi # DesignWare PCIe registers
+ - const: elbi # External local bus interface registers
+ - const: parf # Qualcomm specific registers
+ - const: config # PCIe configuration space
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pcie-ipq6018
+ - qcom,pcie-ipq8074-gen3
+ then:
+ properties:
+ reg:
+ minItems: 5
+ maxItems: 5
+ reg-names:
+ items:
+ - const: dbi # DesignWare PCIe registers
+ - const: elbi # External local bus interface registers
+ - const: atu # ATU address space
+ - const: parf # Qualcomm specific registers
+ - const: config # PCIe configuration space
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pcie-apq8084
+ - qcom,pcie-msm8996
+ - qcom,pcie-sdm845
+ then:
+ properties:
+ reg:
+ minItems: 4
+ maxItems: 5
+ reg-names:
+ minItems: 4
+ items:
+ - const: parf # Qualcomm specific registers
+ - const: dbi # DesignWare PCIe registers
+ - const: elbi # External local bus interface registers
+ - const: config # PCIe configuration space
+ - const: mhi # MHI registers
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pcie-sa8775p
+ - qcom,pcie-sc7280
+ - qcom,pcie-sc8180x
+ - qcom,pcie-sc8280xp
+ - qcom,pcie-sdx55
+ - qcom,pcie-sm8250
+ - qcom,pcie-sm8350
+ - qcom,pcie-sm8450-pcie0
+ - qcom,pcie-sm8450-pcie1
+ - qcom,pcie-sm8550
+ then:
+ properties:
+ reg:
+ minItems: 5
+ maxItems: 6
+ reg-names:
+ minItems: 5
+ items:
+ - const: parf # Qualcomm specific registers
+ - const: dbi # DesignWare PCIe registers
+ - const: elbi # External local bus interface registers
+ - const: atu # ATU address space
+ - const: config # PCIe configuration space
+ - const: mhi # MHI registers
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pcie-apq8064
+ - qcom,pcie-ipq8064
+ - qcom,pcie-ipq8064v2
+ then:
+ properties:
+ clocks:
+ minItems: 3
+ maxItems: 5
+ clock-names:
+ minItems: 3
+ items:
+ - const: core # Clocks the pcie hw block
+ - const: iface # Configuration AHB clock
+ - const: phy # Clocks the pcie PHY block
+ - const: aux # Clocks the pcie AUX block, not on apq8064
+ - const: ref # Clocks the pcie ref block, not on apq8064
+ resets:
+ minItems: 5
+ maxItems: 6
+ reset-names:
+ minItems: 5
+ items:
+ - const: axi # AXI reset
+ - const: ahb # AHB reset
+ - const: por # POR reset
+ - const: pci # PCI reset
+ - const: phy # PHY reset
+ - const: ext # EXT reset, not on apq8064
+ required:
+ - vdda-supply
+ - vdda_phy-supply
+ - vdda_refclk-supply
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pcie-apq8084
+ then:
+ properties:
+ clocks:
+ minItems: 4
+ maxItems: 4
+ clock-names:
+ items:
+ - const: iface # Configuration AHB clock
+ - const: master_bus # Master AXI clock
+ - const: slave_bus # Slave AXI clock
+ - const: aux # Auxiliary (AUX) clock
+ resets:
+ maxItems: 1
+ reset-names:
+ items:
+ - const: core # Core reset
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pcie-ipq4019
+ then:
+ properties:
+ clocks:
+ minItems: 3
+ maxItems: 3
+ clock-names:
+ items:
+ - const: aux # Auxiliary (AUX) clock
+ - const: master_bus # Master AXI clock
+ - const: slave_bus # Slave AXI clock
+ resets:
+ minItems: 12
+ maxItems: 12
+ reset-names:
+ items:
+ - const: axi_m # AXI master reset
+ - const: axi_s # AXI slave reset
+ - const: pipe # PIPE reset
+ - const: axi_m_vmid # VMID reset
+ - const: axi_s_xpu # XPU reset
+ - const: parf # PARF reset
+ - const: phy # PHY reset
+ - const: axi_m_sticky # AXI sticky reset
+ - const: pipe_sticky # PIPE sticky reset
+ - const: pwr # PWR reset
+ - const: ahb # AHB reset
+ - const: phy_ahb # PHY AHB reset
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pcie-msm8996
+ then:
+ properties:
+ clocks:
+ minItems: 5
+ maxItems: 5
+ clock-names:
+ items:
+ - const: pipe # Pipe Clock driving internal logic
+ - const: aux # Auxiliary (AUX) clock
+ - const: cfg # Configuration clock
+ - const: bus_master # Master AXI clock
+ - const: bus_slave # Slave AXI clock
+ resets: false
+ reset-names: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pcie-ipq8074
+ then:
+ properties:
+ clocks:
+ minItems: 5
+ maxItems: 5
+ clock-names:
+ items:
+ - const: iface # PCIe to SysNOC BIU clock
+ - const: axi_m # AXI Master clock
+ - const: axi_s # AXI Slave clock
+ - const: ahb # AHB clock
+ - const: aux # Auxiliary clock
+ resets:
+ minItems: 7
+ maxItems: 7
+ reset-names:
+ items:
+ - const: pipe # PIPE reset
+ - const: sleep # Sleep reset
+ - const: sticky # Core Sticky reset
+ - const: axi_m # AXI Master reset
+ - const: axi_s # AXI Slave reset
+ - const: ahb # AHB Reset
+ - const: axi_m_sticky # AXI Master Sticky reset
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pcie-ipq6018
+ - qcom,pcie-ipq8074-gen3
+ then:
+ properties:
+ clocks:
+ minItems: 5
+ maxItems: 5
+ clock-names:
+ items:
+ - const: iface # PCIe to SysNOC BIU clock
+ - const: axi_m # AXI Master clock
+ - const: axi_s # AXI Slave clock
+ - const: axi_bridge # AXI bridge clock
+ - const: rchng
+ resets:
+ minItems: 8
+ maxItems: 8
+ reset-names:
+ items:
+ - const: pipe # PIPE reset
+ - const: sleep # Sleep reset
+ - const: sticky # Core Sticky reset
+ - const: axi_m # AXI Master reset
+ - const: axi_s # AXI Slave reset
+ - const: ahb # AHB Reset
+ - const: axi_m_sticky # AXI Master Sticky reset
+ - const: axi_s_sticky # AXI Slave Sticky reset
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pcie-qcs404
+ then:
+ properties:
+ clocks:
+ minItems: 4
+ maxItems: 4
+ clock-names:
+ items:
+ - const: iface # AHB clock
+ - const: aux # Auxiliary clock
+ - const: master_bus # AXI Master clock
+ - const: slave_bus # AXI Slave clock
+ resets:
+ minItems: 6
+ maxItems: 6
+ reset-names:
+ items:
+ - const: axi_m # AXI Master reset
+ - const: axi_s # AXI Slave reset
+ - const: axi_m_sticky # AXI Master Sticky reset
+ - const: pipe_sticky # PIPE sticky reset
+ - const: pwr # PWR reset
+ - const: ahb # AHB reset
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pcie-sc7280
+ then:
+ properties:
+ clocks:
+ minItems: 13
+ maxItems: 13
+ clock-names:
+ items:
+ - const: pipe # PIPE clock
+ - const: pipe_mux # PIPE MUX
+ - const: phy_pipe # PIPE output clock
+ - const: ref # REFERENCE clock
+ - const: aux # Auxiliary clock
+ - const: cfg # Configuration clock
+ - const: bus_master # Master AXI clock
+ - const: bus_slave # Slave AXI clock
+ - const: slave_q2a # Slave Q2A clock
+ - const: tbu # PCIe TBU clock
+ - const: ddrss_sf_tbu # PCIe SF TBU clock
+ - const: aggre0 # Aggre NoC PCIe CENTER SF AXI clock
+ - const: aggre1 # Aggre NoC PCIe1 AXI clock
+ resets:
+ maxItems: 1
+ reset-names:
+ items:
+ - const: pci # PCIe core reset
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pcie-sdm845
+ then:
+ oneOf:
+ # Unfortunately the "optional" ref clock is used in the middle of the list
+ - properties:
+ clocks:
+ minItems: 8
+ maxItems: 8
+ clock-names:
+ items:
+ - const: pipe # PIPE clock
+ - const: aux # Auxiliary clock
+ - const: cfg # Configuration clock
+ - const: bus_master # Master AXI clock
+ - const: bus_slave # Slave AXI clock
+ - const: slave_q2a # Slave Q2A clock
+ - const: ref # REFERENCE clock
+ - const: tbu # PCIe TBU clock
+ - properties:
+ clocks:
+ minItems: 7
+ maxItems: 7
+ clock-names:
+ items:
+ - const: pipe # PIPE clock
+ - const: aux # Auxiliary clock
+ - const: cfg # Configuration clock
+ - const: bus_master # Master AXI clock
+ - const: bus_slave # Slave AXI clock
+ - const: slave_q2a # Slave Q2A clock
+ - const: tbu # PCIe TBU clock
+ properties:
+ resets:
+ maxItems: 1
+ reset-names:
+ items:
+ - const: pci # PCIe core reset
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pcie-sc8180x
+ - qcom,pcie-sm8150
+ - qcom,pcie-sm8250
+ then:
+ oneOf:
+ # Unfortunately the "optional" ref clock is used in the middle of the list
+ - properties:
+ clocks:
+ minItems: 9
+ maxItems: 9
+ clock-names:
+ items:
+ - const: pipe # PIPE clock
+ - const: aux # Auxiliary clock
+ - const: cfg # Configuration clock
+ - const: bus_master # Master AXI clock
+ - const: bus_slave # Slave AXI clock
+ - const: slave_q2a # Slave Q2A clock
+ - const: ref # REFERENCE clock
+ - const: tbu # PCIe TBU clock
+ - const: ddrss_sf_tbu # PCIe SF TBU clock
+ - properties:
+ clocks:
+ minItems: 8
+ maxItems: 8
+ clock-names:
+ items:
+ - const: pipe # PIPE clock
+ - const: aux # Auxiliary clock
+ - const: cfg # Configuration clock
+ - const: bus_master # Master AXI clock
+ - const: bus_slave # Slave AXI clock
+ - const: slave_q2a # Slave Q2A clock
+ - const: tbu # PCIe TBU clock
+ - const: ddrss_sf_tbu # PCIe SF TBU clock
+ properties:
+ resets:
+ maxItems: 1
+ reset-names:
+ items:
+ - const: pci # PCIe core reset
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pcie-sm8350
+ then:
+ properties:
+ clocks:
+ minItems: 8
+ maxItems: 9
+ clock-names:
+ minItems: 8
+ items:
+ - const: aux # Auxiliary clock
+ - const: cfg # Configuration clock
+ - const: bus_master # Master AXI clock
+ - const: bus_slave # Slave AXI clock
+ - const: slave_q2a # Slave Q2A clock
+ - const: tbu # PCIe TBU clock
+ - const: ddrss_sf_tbu # PCIe SF TBU clock
+ - const: aggre1 # Aggre NoC PCIe1 AXI clock
+ - const: aggre0 # Aggre NoC PCIe0 AXI clock
+ resets:
+ maxItems: 1
+ reset-names:
+ items:
+ - const: pci # PCIe core reset
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pcie-sm8450-pcie0
+ then:
+ properties:
+ clocks:
+ minItems: 12
+ maxItems: 12
+ clock-names:
+ items:
+ - const: pipe # PIPE clock
+ - const: pipe_mux # PIPE MUX
+ - const: phy_pipe # PIPE output clock
+ - const: ref # REFERENCE clock
+ - const: aux # Auxiliary clock
+ - const: cfg # Configuration clock
+ - const: bus_master # Master AXI clock
+ - const: bus_slave # Slave AXI clock
+ - const: slave_q2a # Slave Q2A clock
+ - const: ddrss_sf_tbu # PCIe SF TBU clock
+ - const: aggre0 # Aggre NoC PCIe0 AXI clock
+ - const: aggre1 # Aggre NoC PCIe1 AXI clock
+ resets:
+ maxItems: 1
+ reset-names:
+ items:
+ - const: pci # PCIe core reset
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pcie-sm8450-pcie1
+ then:
+ properties:
+ clocks:
+ minItems: 11
+ maxItems: 11
+ clock-names:
+ items:
+ - const: pipe # PIPE clock
+ - const: pipe_mux # PIPE MUX
+ - const: phy_pipe # PIPE output clock
+ - const: ref # REFERENCE clock
+ - const: aux # Auxiliary clock
+ - const: cfg # Configuration clock
+ - const: bus_master # Master AXI clock
+ - const: bus_slave # Slave AXI clock
+ - const: slave_q2a # Slave Q2A clock
+ - const: ddrss_sf_tbu # PCIe SF TBU clock
+ - const: aggre1 # Aggre NoC PCIe1 AXI clock
+ resets:
+ maxItems: 1
+ reset-names:
+ items:
+ - const: pci # PCIe core reset
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pcie-sm8550
+ then:
+ properties:
+ clocks:
+ minItems: 7
+ maxItems: 8
+ clock-names:
+ minItems: 7
+ items:
+ - const: aux # Auxiliary clock
+ - const: cfg # Configuration clock
+ - const: bus_master # Master AXI clock
+ - const: bus_slave # Slave AXI clock
+ - const: slave_q2a # Slave Q2A clock
+ - const: ddrss_sf_tbu # PCIe SF TBU clock
+ - const: noc_aggr # Aggre NoC PCIe AXI clock
+ - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock
+ resets:
+ minItems: 1
+ maxItems: 2
+ reset-names:
+ minItems: 1
+ items:
+ - const: pci # PCIe core reset
+ - const: link_down # PCIe link down reset
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pcie-sa8540p
+ - qcom,pcie-sc8280xp
+ then:
+ properties:
+ clocks:
+ minItems: 8
+ maxItems: 9
+ clock-names:
+ minItems: 8
+ items:
+ - const: aux # Auxiliary clock
+ - const: cfg # Configuration clock
+ - const: bus_master # Master AXI clock
+ - const: bus_slave # Slave AXI clock
+ - const: slave_q2a # Slave Q2A clock
+ - const: ddrss_sf_tbu # PCIe SF TBU clock
+ - const: noc_aggr_4 # NoC aggregate 4 clock
+ - const: noc_aggr_south_sf # NoC aggregate South SF clock
+ - const: cnoc_qx # Configuration NoC QX clock
+ resets:
+ maxItems: 1
+ reset-names:
+ items:
+ - const: pci # PCIe core reset
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pcie-sdx55
+ then:
+ properties:
+ clocks:
+ minItems: 7
+ maxItems: 7
+ clock-names:
+ items:
+ - const: pipe # PIPE clock
+ - const: aux # Auxiliary clock
+ - const: cfg # Configuration clock
+ - const: bus_master # Master AXI clock
+ - const: bus_slave # Slave AXI clock
+ - const: slave_q2a # Slave Q2A clock
+ - const: sleep # PCIe Sleep clock
+ resets:
+ maxItems: 1
+ reset-names:
+ items:
+ - const: pci # PCIe core reset
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pcie-sa8775p
+ then:
+ properties:
+ clocks:
+ minItems: 5
+ maxItems: 5
+ clock-names:
+ items:
+ - const: aux # Auxiliary clock
+ - const: cfg # Configuration clock
+ - const: bus_master # Master AXI clock
+ - const: bus_slave # Slave AXI clock
+ - const: slave_q2a # Slave Q2A clock
+ resets:
+ maxItems: 1
+ reset-names:
+ items:
+ - const: pci # PCIe core reset
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pcie-sa8540p
+ - qcom,pcie-sa8775p
+ - qcom,pcie-sc8280xp
+ then:
+ required:
+ - interconnects
+ - interconnect-names
+
+ - if:
+ not:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pcie-apq8064
+ - qcom,pcie-ipq4019
+ - qcom,pcie-ipq8064
+ - qcom,pcie-ipq8064v2
+ - qcom,pcie-ipq8074
+ - qcom,pcie-ipq8074-gen3
+ - qcom,pcie-qcs404
+ then:
+ required:
+ - power-domains
+
+ - if:
+ not:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pcie-msm8996
+ then:
+ required:
+ - resets
+ - reset-names
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pcie-msm8996
+ - qcom,pcie-sa8775p
+ - qcom,pcie-sc7280
+ - qcom,pcie-sc8180x
+ - qcom,pcie-sdm845
+ - qcom,pcie-sm8150
+ - qcom,pcie-sm8250
+ - qcom,pcie-sm8350
+ - qcom,pcie-sm8450-pcie0
+ - qcom,pcie-sm8450-pcie1
+ - qcom,pcie-sm8550
+ then:
+ oneOf:
+ - properties:
+ interrupts:
+ maxItems: 1
+ interrupt-names:
+ items:
+ - const: msi
+ - properties:
+ interrupts:
+ minItems: 8
+ interrupt-names:
+ items:
+ - const: msi0
+ - const: msi1
+ - const: msi2
+ - const: msi3
+ - const: msi4
+ - const: msi5
+ - const: msi6
+ - const: msi7
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pcie-sc8280xp
+ then:
+ properties:
+ interrupts:
+ minItems: 4
+ maxItems: 4
+ interrupt-names:
+ items:
+ - const: msi0
+ - const: msi1
+ - const: msi2
+ - const: msi3
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pcie-apq8064
+ - qcom,pcie-apq8084
+ - qcom,pcie-ipq4019
+ - qcom,pcie-ipq6018
+ - qcom,pcie-ipq8064
+ - qcom,pcie-ipq8064-v2
+ - qcom,pcie-ipq8074
+ - qcom,pcie-ipq8074-gen3
+ - qcom,pcie-qcs404
+ - qcom,pcie-sa8540p
+ then:
+ properties:
+ interrupts:
+ maxItems: 1
+ interrupt-names:
+ items:
+ - const: msi
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ pcie@1b500000 {
+ compatible = "qcom,pcie-ipq8064";
+ reg = <0x1b500000 0x1000>,
+ <0x1b502000 0x80>,
+ <0x1b600000 0x100>,
+ <0x0ff00000 0x100000>;
+ reg-names = "dbi", "elbi", "parf", "config";
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000>,
+ <0x82000000 0 0 0x08000000 0 0x07e00000>;
+ interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc 41>,
+ <&gcc 43>,
+ <&gcc 44>,
+ <&gcc 42>,
+ <&gcc 248>;
+ clock-names = "core", "iface", "phy", "aux", "ref";
+ resets = <&gcc 27>,
+ <&gcc 26>,
+ <&gcc 25>,
+ <&gcc 24>,
+ <&gcc 23>,
+ <&gcc 22>;
+ reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+ pinctrl-0 = <&pcie_pins_default>;
+ pinctrl-names = "default";
+ vdda-supply = <&pm8921_s3>;
+ vdda_phy-supply = <&pm8921_lvs6>;
+ vdda_refclk-supply = <&ext_3p3v>;
+ };
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/gpio/gpio.h>
+ pcie@fc520000 {
+ compatible = "qcom,pcie-apq8084";
+ reg = <0xfc520000 0x2000>,
+ <0xff000000 0x1000>,
+ <0xff001000 0x1000>,
+ <0xff002000 0x2000>;
+ reg-names = "parf", "dbi", "elbi", "config";
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x81000000 0 0 0xff200000 0 0x00100000>,
+ <0x82000000 0 0x00300000 0xff300000 0 0x00d00000>;
+ interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc 324>,
+ <&gcc 325>,
+ <&gcc 327>,
+ <&gcc 323>;
+ clock-names = "iface", "master_bus", "slave_bus", "aux";
+ resets = <&gcc 81>;
+ reset-names = "core";
+ power-domains = <&gcc 1>;
+ vdda-supply = <&pma8084_l3>;
+ phys = <&pciephy0>;
+ phy-names = "pciephy";
+ perst-gpios = <&tlmm 70 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&pcie0_pins_default>;
+ pinctrl-names = "default";
+ };
+...
diff --git a/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt b/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt
new file mode 100644
index 0000000000..ffba4f63d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt
@@ -0,0 +1,187 @@
+* Mediatek/Ralink RT3883 PCI controller
+
+1) Main node
+
+ Required properties:
+
+ - compatible: must be "ralink,rt3883-pci"
+
+ - reg: specifies the physical base address of the controller and
+ the length of the memory mapped region.
+
+ - #address-cells: specifies the number of cells needed to encode an
+ address. The value must be 1.
+
+ - #size-cells: specifies the number of cells used to represent the size
+ of an address. The value must be 1.
+
+ - ranges: specifies the translation between child address space and parent
+ address space
+
+ Optional properties:
+
+ - status: indicates the operational status of the device.
+ Value must be either "disabled" or "okay".
+
+2) Child nodes
+
+ The main node must have two child nodes which describes the built-in
+ interrupt controller and the PCI host bridge.
+
+ a) Interrupt controller:
+
+ Required properties:
+
+ - interrupt-controller: identifies the node as an interrupt controller
+
+ - #address-cells: specifies the number of cells needed to encode an
+ address. The value must be 0. As such, 'interrupt-map' nodes do not
+ have to specify a parent unit address.
+
+ - #interrupt-cells: specifies the number of cells needed to encode an
+ interrupt source. The value must be 1.
+
+ - interrupts: specifies the interrupt source of the parent interrupt
+ controller. The format of the interrupt specifier depends on the
+ parent interrupt controller.
+
+ b) PCI host bridge:
+
+ Required properties:
+
+ - #address-cells: specifies the number of cells needed to encode an
+ address. The value must be 0.
+
+ - #size-cells: specifies the number of cells used to represent the size
+ of an address. The value must be 2.
+
+ - #interrupt-cells: specifies the number of cells needed to encode an
+ interrupt source. The value must be 1.
+
+ - device_type: must be "pci"
+
+ - bus-range: PCI bus numbers covered
+
+ - ranges: specifies the ranges for the PCI memory and I/O regions
+
+ - interrupt-map-mask,
+ - interrupt-map: standard PCI properties to define the mapping of the
+ PCI interface to interrupt numbers.
+
+ The PCI host bridge node might have additional sub-nodes representing
+ the onboard PCI devices/PCI slots. Each such sub-node must have the
+ following mandatory properties:
+
+ - reg: used only for interrupt mapping, so only the first four bytes
+ are used to refer to the correct bus number and device number.
+
+ - device_type: must be "pci"
+
+ If a given sub-node represents a PCI bridge it must have following
+ mandatory properties as well:
+
+ - #address-cells: must be set to <3>
+
+ - #size-cells: must set to <2>
+
+ - #interrupt-cells: must be set to <1>
+
+ - interrupt-map-mask,
+ - interrupt-map: standard PCI properties to define the mapping of the
+ PCI interface to interrupt numbers.
+
+ Besides the required properties the sub-nodes may have these optional
+ properties:
+
+ - status: indicates the operational status of the sub-node.
+ Value must be either "disabled" or "okay".
+
+3) Example:
+
+ a) SoC specific dtsi file:
+
+ pci@10140000 {
+ compatible = "ralink,rt3883-pci";
+ reg = <0x10140000 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges; /* direct mapping */
+
+ status = "disabled";
+
+ pciintc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <4>;
+ };
+
+ host-bridge {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ device_type = "pci";
+
+ bus-range = <0 255>;
+ ranges = <
+ 0x02000000 0 0x00000000 0x20000000 0 0x10000000 /* pci memory */
+ 0x01000000 0 0x00000000 0x10160000 0 0x00010000 /* io space */
+ >;
+
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 17 */
+ 0x8800 0 0 1 &pciintc 18
+ 0x8800 0 0 2 &pciintc 18
+ 0x8800 0 0 3 &pciintc 18
+ 0x8800 0 0 4 &pciintc 18
+ /* IDSEL 18 */
+ 0x9000 0 0 1 &pciintc 19
+ 0x9000 0 0 2 &pciintc 19
+ 0x9000 0 0 3 &pciintc 19
+ 0x9000 0 0 4 &pciintc 19
+ >;
+
+ pci-bridge@1 {
+ reg = <0x0800 0 0 0 0>;
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ interrupt-map-mask = <0x0 0 0 0>;
+ interrupt-map = <0x0 0 0 0 &pciintc 20>;
+
+ status = "disabled";
+ };
+
+ pci-slot@17 {
+ reg = <0x8800 0 0 0 0>;
+ device_type = "pci";
+
+ status = "disabled";
+ };
+
+ pci-slot@18 {
+ reg = <0x9000 0 0 0 0>;
+ device_type = "pci";
+
+ status = "disabled";
+ };
+ };
+ };
+
+ b) Board specific dts file:
+
+ pci@10140000 {
+ status = "okay";
+
+ host-bridge {
+ pci-bridge@1 {
+ status = "okay";
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml b/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml
new file mode 100644
index 0000000000..32a3b7665f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Renesas Electronics Europe GmbH - https://www.renesas.com/eu/en/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rcar-pci-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car PCIe Endpoint
+
+maintainers:
+ - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+ - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,r8a774a1-pcie-ep # RZ/G2M
+ - renesas,r8a774b1-pcie-ep # RZ/G2N
+ - renesas,r8a774c0-pcie-ep # RZ/G2E
+ - renesas,r8a774e1-pcie-ep # RZ/G2H
+ - renesas,r8a7795-pcie-ep # R-Car H3
+ - const: renesas,rcar-gen3-pcie-ep # R-Car Gen3 and RZ/G2
+
+ reg:
+ maxItems: 5
+
+ reg-names:
+ items:
+ - const: apb-base
+ - const: memory0
+ - const: memory1
+ - const: memory2
+ - const: memory3
+
+ interrupts:
+ minItems: 3
+ maxItems: 3
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: pcie
+
+ max-functions:
+ minimum: 1
+ maximum: 1
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - resets
+ - power-domains
+ - clocks
+ - clock-names
+ - max-functions
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a774c0-cpg-mssr.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/r8a774c0-sysc.h>
+
+ pcie0_ep: pcie-ep@fe000000 {
+ compatible = "renesas,r8a774c0-pcie-ep",
+ "renesas,rcar-gen3-pcie-ep";
+ reg = <0xfe000000 0x80000>,
+ <0xfe100000 0x100000>,
+ <0xfe200000 0x200000>,
+ <0x30000000 0x8000000>,
+ <0x38000000 0x8000000>;
+ reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3";
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&cpg 319>;
+ power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
+ clocks = <&cpg CPG_MOD 319>;
+ clock-names = "pcie";
+ max-functions = /bits/ 8 <1>;
+ };
diff --git a/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml b/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
new file mode 100644
index 0000000000..8fdfbc763d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Renesas Electronics Corp.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rcar-pci-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car PCIe Host
+
+maintainers:
+ - Marek Vasut <marek.vasut+renesas@gmail.com>
+ - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+allOf:
+ - $ref: pci-bus.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: renesas,pcie-r8a7779 # R-Car H1
+ - items:
+ - enum:
+ - renesas,pcie-r8a7742 # RZ/G1H
+ - renesas,pcie-r8a7743 # RZ/G1M
+ - renesas,pcie-r8a7744 # RZ/G1N
+ - renesas,pcie-r8a7790 # R-Car H2
+ - renesas,pcie-r8a7791 # R-Car M2-W
+ - renesas,pcie-r8a7793 # R-Car M2-N
+ - const: renesas,pcie-rcar-gen2 # R-Car Gen2 and RZ/G1
+ - items:
+ - enum:
+ - renesas,pcie-r8a774a1 # RZ/G2M
+ - renesas,pcie-r8a774b1 # RZ/G2N
+ - renesas,pcie-r8a774c0 # RZ/G2E
+ - renesas,pcie-r8a774e1 # RZ/G2H
+ - renesas,pcie-r8a7795 # R-Car H3
+ - renesas,pcie-r8a7796 # R-Car M3-W
+ - renesas,pcie-r8a77961 # R-Car M3-W+
+ - renesas,pcie-r8a77965 # R-Car M3-N
+ - renesas,pcie-r8a77980 # R-Car V3H
+ - renesas,pcie-r8a77990 # R-Car E3
+ - const: renesas,pcie-rcar-gen3 # R-Car Gen3 and RZ/G2
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 3
+ maxItems: 3
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: pcie
+ - const: pcie_bus
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ const: pcie
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - power-domains
+
+if:
+ not:
+ properties:
+ compatible:
+ contains:
+ const: renesas,pcie-r8a7779
+then:
+ required:
+ - resets
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a7791-cpg-mssr.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/r8a7791-sysc.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie: pcie@fe000000 {
+ compatible = "renesas,pcie-r8a7791", "renesas,pcie-rcar-gen2";
+ reg = <0 0xfe000000 0 0x80000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+ <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+ <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>,
+ <0x42000000 2 0x00000000 2 0x00000000 0 0x40000000>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+ clock-names = "pcie", "pcie_bus";
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 319>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml b/Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml
new file mode 100644
index 0000000000..5a0d64d3ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml
@@ -0,0 +1,186 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/renesas,pci-rcar-gen2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas AHB to PCI bridge
+
+maintainers:
+ - Marek Vasut <marek.vasut+renesas@gmail.com>
+ - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
+
+description: |
+ This is the bridge used internally to connect the USB controllers to the
+ AHB. There is one bridge instance per USB port connected to the internal
+ OHCI and EHCI controllers.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - renesas,pci-r8a7742 # RZ/G1H
+ - renesas,pci-r8a7743 # RZ/G1M
+ - renesas,pci-r8a7744 # RZ/G1N
+ - renesas,pci-r8a7745 # RZ/G1E
+ - renesas,pci-r8a7790 # R-Car H2
+ - renesas,pci-r8a7791 # R-Car M2-W
+ - renesas,pci-r8a7793 # R-Car M2-N
+ - renesas,pci-r8a7794 # R-Car E2
+ - const: renesas,pci-rcar-gen2 # R-Car Gen2 and RZ/G1
+ - items:
+ - enum:
+ - renesas,pci-r9a06g032 # RZ/N1D
+ - const: renesas,pci-rzn1 # RZ/N1
+
+ reg:
+ items:
+ - description: Operational registers for the OHCI/EHCI controllers.
+ - description: Bridge configuration and control registers.
+
+ interrupts:
+ maxItems: 1
+
+ clocks: true
+
+ clock-names: true
+
+ resets:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ bus-range:
+ description: |
+ The PCI bus number range; as this is a single bus, the range
+ should be specified as the same value twice.
+
+ dma-ranges:
+ description: |
+ A single range for the inbound memory region. If not supplied,
+ defaults to 1GiB at 0x40000000. Note there are hardware restrictions on
+ the allowed combinations of address and size.
+ maxItems: 1
+
+patternProperties:
+ '^usb@[0-1],0$':
+ type: object
+
+ description:
+ This a USB controller PCI device
+
+ properties:
+ reg:
+ description:
+ Identify the correct bus, device and function number in the
+ form <bdf 0 0 0 0>.
+
+ items:
+ minItems: 5
+ maxItems: 5
+
+ phys:
+ description:
+ Reference to the USB phy
+ maxItems: 1
+
+ phy-names:
+ maxItems: 1
+
+ required:
+ - reg
+ - phys
+ - phy-names
+
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-map
+ - interrupt-map-mask
+ - clocks
+ - power-domains
+ - bus-range
+ - "#address-cells"
+ - "#size-cells"
+ - "#interrupt-cells"
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,pci-rzn1
+ then:
+ properties:
+ clocks:
+ items:
+ - description: Internal bus clock (AHB) for HOST
+ - description: Internal bus clock (AHB) Power Management
+ - description: PCI clock for USB subsystem
+ clock-names:
+ items:
+ - const: hclkh
+ - const: hclkpm
+ - const: pciclk
+ required:
+ - clock-names
+ else:
+ properties:
+ clocks:
+ items:
+ - description: Device clock
+ clock-names:
+ items:
+ - const: pclk
+ required:
+ - resets
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+ #include <dt-bindings/power/r8a7790-sysc.h>
+
+ pci@ee090000 {
+ compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2";
+ device_type = "pci";
+ reg = <0xee090000 0xc00>,
+ <0xee080000 0x1100>;
+ clocks = <&cpg CPG_MOD 703>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 703>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+
+ bus-range = <0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x02000000 0 0xee080000 0xee080000 0 0x00010000>;
+ dma-ranges = <0x42000000 0 0x40000000 0x40000000 0 0x40000000>;
+ interrupt-map-mask = <0xf800 0 0 0x7>;
+ interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+
+ usb@1,0 {
+ reg = <0x800 0 0 0 0>;
+ phys = <&usb0 0>;
+ phy-names = "usb";
+ };
+
+ usb@2,0 {
+ reg = <0x1000 0 0 0 0>;
+ phys = <&usb0 0>;
+ phy-names = "usb";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-common.yaml b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-common.yaml
new file mode 100644
index 0000000000..a8574f8a84
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-common.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rockchip,rk3399-pcie-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip AXI PCIe Bridge Common Properties
+
+maintainers:
+ - Shawn Lin <shawn.lin@rock-chips.com>
+
+properties:
+ reg:
+ maxItems: 2
+
+ clocks:
+ maxItems: 4
+
+ clock-names:
+ items:
+ - const: aclk
+ - const: aclk-perf
+ - const: hclk
+ - const: pm
+
+ num-lanes:
+ maximum: 4
+
+ phys:
+ oneOf:
+ - maxItems: 1
+ - maxItems: 4
+
+ phy-names:
+ oneOf:
+ - const: pcie-phy
+ - items:
+ - const: pcie-phy-0
+ - const: pcie-phy-1
+ - const: pcie-phy-2
+ - const: pcie-phy-3
+
+ resets:
+ maxItems: 7
+
+ reset-names:
+ items:
+ - const: core
+ - const: mgmt
+ - const: mgmt-sticky
+ - const: pipe
+ - const: pm
+ - const: pclk
+ - const: aclk
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - phys
+ - phy-names
+ - resets
+ - reset-names
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml
new file mode 100644
index 0000000000..6b62f6f58e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie-ep.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rockchip,rk3399-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip AXI PCIe Endpoint
+
+maintainers:
+ - Shawn Lin <shawn.lin@rock-chips.com>
+
+allOf:
+ - $ref: /schemas/pci/pci-ep.yaml#
+ - $ref: rockchip,rk3399-pcie-common.yaml#
+
+properties:
+ compatible:
+ const: rockchip,rk3399-pcie-ep
+
+ reg: true
+
+ reg-names:
+ items:
+ - const: apb-base
+ - const: mem-base
+
+ rockchip,max-outbound-regions:
+ description: Maximum number of outbound regions
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maximum: 32
+ default: 32
+
+required:
+ - rockchip,max-outbound-regions
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/clock/rk3399-cru.h>
+
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie-ep@f8000000 {
+ compatible = "rockchip,rk3399-pcie-ep";
+ reg = <0x0 0xfd000000 0x0 0x1000000>, <0x0 0xfa000000 0x0 0x2000000>;
+ reg-names = "apb-base", "mem-base";
+ clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
+ <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
+ clock-names = "aclk", "aclk-perf",
+ "hclk", "pm";
+ max-functions = /bits/ 8 <8>;
+ num-lanes = <4>;
+ resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
+ <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE> ,
+ <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>;
+ reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
+ "pm", "pclk", "aclk";
+ phys = <&pcie_phy 0>, <&pcie_phy 1>, <&pcie_phy 2>, <&pcie_phy 3>;
+ phy-names = "pcie-phy-0", "pcie-phy-1", "pcie-phy-2", "pcie-phy-3";
+ rockchip,max-outbound-regions = <16>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_clkreqnb_cpm>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml
new file mode 100644
index 0000000000..531008f0b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rockchip,rk3399-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip AXI PCIe Root Port Bridge Host
+
+maintainers:
+ - Shawn Lin <shawn.lin@rock-chips.com>
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: rockchip,rk3399-pcie-common.yaml#
+
+properties:
+ compatible:
+ const: rockchip,rk3399-pcie
+
+ reg: true
+
+ reg-names:
+ items:
+ - const: axi-base
+ - const: apb-base
+
+ interrupts:
+ maxItems: 3
+
+ interrupt-names:
+ items:
+ - const: sys
+ - const: legacy
+ - const: client
+
+ aspm-no-l0s:
+ description: This property is needed if using 24MHz OSC for RC's PHY.
+
+ ep-gpios:
+ description: pre-reset GPIO
+
+ vpcie12v-supply:
+ description: The 12v regulator to use for PCIe.
+
+ vpcie3v3-supply:
+ description: The 3.3v regulator to use for PCIe.
+
+ vpcie1v8-supply:
+ description: The 1.8v regulator to use for PCIe.
+
+ vpcie0v9-supply:
+ description: The 0.9v regulator to use for PCIe.
+
+ interrupt-controller:
+ type: object
+ additionalProperties: false
+
+ properties:
+ '#address-cells':
+ const: 0
+
+ '#interrupt-cells':
+ const: 1
+
+ interrupt-controller: true
+
+required:
+ - ranges
+ - "#interrupt-cells"
+ - interrupts
+ - interrupt-controller
+ - interrupt-map
+ - interrupt-map-mask
+ - msi-map
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/clock/rk3399-cru.h>
+
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie@f8000000 {
+ compatible = "rockchip,rk3399-pcie";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
+ <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
+ clock-names = "aclk", "aclk-perf",
+ "hclk", "pm";
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>,
+ <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "sys", "legacy", "client";
+ ep-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+ ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000
+ 0x81000000 0x0 0xfa600000 0x0 0xfa600000 0x0 0x100000>;
+ num-lanes = <4>;
+ msi-map = <0x0 &its 0x0 0x1000>;
+ reg = <0x0 0xf8000000 0x0 0x2000000>, <0x0 0xfd000000 0x0 0x1000000>;
+ reg-names = "axi-base", "apb-base";
+ resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
+ <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE> ,
+ <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>;
+ reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
+ "pm", "pclk", "aclk";
+ /* deprecated legacy PHY model */
+ phys = <&pcie_phy>;
+ phy-names = "pcie-phy";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_clkreq>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+ <0 0 0 2 &pcie0_intc 1>,
+ <0 0 0 3 &pcie0_intc 2>,
+ <0 0 0 4 &pcie0_intc 3>;
+
+ pcie0_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
new file mode 100644
index 0000000000..1ae8dcfa07
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
@@ -0,0 +1,215 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rockchip-dw-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DesignWare based PCIe controller on Rockchip SoCs
+
+maintainers:
+ - Shawn Lin <shawn.lin@rock-chips.com>
+ - Simon Xue <xxm@rock-chips.com>
+ - Heiko Stuebner <heiko@sntech.de>
+
+description: |+
+ RK3568 SoC PCIe host controller is based on the Synopsys DesignWare
+ PCIe IP and thus inherits all the common properties defined in
+ snps,dw-pcie.yaml.
+
+allOf:
+ - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: rockchip,rk3568-pcie
+ - items:
+ - enum:
+ - rockchip,rk3588-pcie
+ - const: rockchip,rk3568-pcie
+
+ reg:
+ items:
+ - description: Data Bus Interface (DBI) registers
+ - description: Rockchip designed configuration registers
+ - description: Config registers
+
+ reg-names:
+ items:
+ - const: dbi
+ - const: apb
+ - const: config
+
+ clocks:
+ minItems: 5
+ items:
+ - description: AHB clock for PCIe master
+ - description: AHB clock for PCIe slave
+ - description: AHB clock for PCIe dbi
+ - description: APB clock for PCIe
+ - description: Auxiliary clock for PCIe
+ - description: PIPE clock
+
+ clock-names:
+ minItems: 5
+ items:
+ - const: aclk_mst
+ - const: aclk_slv
+ - const: aclk_dbi
+ - const: pclk
+ - const: aux
+ - const: pipe
+
+ interrupts:
+ items:
+ - description:
+ Combined system interrupt, which is used to signal the following
+ interrupts - phy_link_up, dll_link_up, link_req_rst_not, hp_pme,
+ hp, hp_msi, link_auto_bw, link_auto_bw_msi, bw_mgt, bw_mgt_msi,
+ edma_wr, edma_rd, dpa_sub_upd, rbar_update, link_eq_req, ep_elbi_app
+ - description:
+ Combined PM interrupt, which is used to signal the following
+ interrupts - linkst_in_l1sub, linkst_in_l1, linkst_in_l2,
+ linkst_in_l0s, linkst_out_l1sub, linkst_out_l1, linkst_out_l2,
+ linkst_out_l0s, pm_dstate_update
+ - description:
+ Combined message interrupt, which is used to signal the following
+ interrupts - ven_msg, unlock_msg, ltr_msg, cfg_pme, cfg_pme_msi,
+ pm_pme, pm_to_ack, pm_turnoff, obff_idle, obff_obff, obff_cpu_active
+ - description:
+ Combined legacy interrupt, which is used to signal the following
+ interrupts - inta, intb, intc, intd
+ - description:
+ Combined error interrupt, which is used to signal the following
+ interrupts - aer_rc_err, aer_rc_err_msi, rx_cpl_timeout,
+ tx_cpl_timeout, cor_err_sent, nf_err_sent, f_err_sent, cor_err_rx,
+ nf_err_rx, f_err_rx, radm_qoverflow
+
+ interrupt-names:
+ items:
+ - const: sys
+ - const: pmc
+ - const: msg
+ - const: legacy
+ - const: err
+
+ legacy-interrupt-controller:
+ description: Interrupt controller node for handling legacy PCI interrupts.
+ type: object
+ additionalProperties: false
+ properties:
+ "#address-cells":
+ const: 0
+
+ "#interrupt-cells":
+ const: 1
+
+ interrupt-controller: true
+
+ interrupts:
+ items:
+ - description: combined legacy interrupt
+ required:
+ - "#address-cells"
+ - "#interrupt-cells"
+ - interrupt-controller
+ - interrupts
+
+ msi-map: true
+
+ num-lanes: true
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ const: pcie-phy
+
+ power-domains:
+ maxItems: 1
+
+ ranges:
+ minItems: 2
+ maxItems: 3
+
+ resets:
+ minItems: 1
+ maxItems: 2
+
+ reset-names:
+ oneOf:
+ - const: pipe
+ - items:
+ - const: pwr
+ - const: pipe
+
+ vpcie3v3-supply: true
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - msi-map
+ - num-lanes
+ - phys
+ - phy-names
+ - power-domains
+ - resets
+ - reset-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie3x2: pcie@fe280000 {
+ compatible = "rockchip,rk3568-pcie";
+ reg = <0x3 0xc0800000 0x0 0x390000>,
+ <0x0 0xfe280000 0x0 0x10000>,
+ <0x3 0x80000000 0x0 0x100000>;
+ reg-names = "dbi", "apb", "config";
+ bus-range = <0x20 0x2f>;
+ clocks = <&cru 143>, <&cru 144>,
+ <&cru 145>, <&cru 146>,
+ <&cru 147>;
+ clock-names = "aclk_mst", "aclk_slv",
+ "aclk_dbi", "pclk",
+ "aux";
+ device_type = "pci";
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+ linux,pci-domain = <2>;
+ max-link-speed = <2>;
+ msi-map = <0x2000 &its 0x2000 0x1000>;
+ num-lanes = <2>;
+ phys = <&pcie30phy>;
+ phy-names = "pcie-phy";
+ power-domains = <&power 15>;
+ ranges = <0x81000000 0x0 0x80800000 0x3 0x80800000 0x0 0x100000>,
+ <0x83000000 0x0 0x80900000 0x3 0x80900000 0x0 0x3f700000>;
+ resets = <&cru 193>;
+ reset-names = "pipe";
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ legacy-interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml b/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml
new file mode 100644
index 0000000000..f20ed7e709
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/samsung,exynos-pcie.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/samsung,exynos-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC series PCIe Host Controller
+
+maintainers:
+ - Marek Szyprowski <m.szyprowski@samsung.com>
+ - Jaehoon Chung <jh80.chung@samsung.com>
+
+description: |+
+ Exynos5433 SoC PCIe host controller is based on the Synopsys DesignWare
+ PCIe IP and thus inherits all the common properties defined in
+ snps,dw-pcie.yaml.
+
+allOf:
+ - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+ compatible:
+ const: samsung,exynos5433-pcie
+
+ reg:
+ items:
+ - description: Data Bus Interface (DBI) registers.
+ - description: External Local Bus interface (ELBI) registers.
+ - description: PCIe configuration space region.
+
+ reg-names:
+ items:
+ - const: dbi
+ - const: elbi
+ - const: config
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: PCIe bridge clock
+ - description: PCIe bus clock
+
+ clock-names:
+ items:
+ - const: pcie
+ - const: pcie_bus
+
+ phys:
+ maxItems: 1
+
+ vdd10-supply:
+ description:
+ Phandle to a regulator that provides 1.0V power to the PCIe block.
+
+ vdd18-supply:
+ description:
+ Phandle to a regulator that provides 1.8V power to the PCIe block.
+
+ num-lanes:
+ const: 1
+
+ num-viewport:
+ const: 3
+
+required:
+ - reg
+ - reg-names
+ - interrupts
+ - "#address-cells"
+ - "#size-cells"
+ - "#interrupt-cells"
+ - interrupt-map
+ - interrupt-map-mask
+ - ranges
+ - bus-range
+ - device_type
+ - num-lanes
+ - num-viewport
+ - clocks
+ - clock-names
+ - phys
+ - vdd10-supply
+ - vdd18-supply
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/exynos5433.h>
+
+ pcie: pcie@15700000 {
+ compatible = "samsung,exynos5433-pcie";
+ reg = <0x15700000 0x1000>, <0x156b0000 0x1000>, <0x0c000000 0x1000>;
+ reg-names = "dbi", "elbi", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cmu_fsys CLK_PCIE>, <&cmu_fsys CLK_PCLK_PCIE_PHY>;
+ clock-names = "pcie", "pcie_bus";
+ phys = <&pcie_phy>;
+ pinctrl-0 = <&pcie_bus &pcie_wlanen>;
+ pinctrl-names = "default";
+ num-lanes = <1>;
+ num-viewport = <3>;
+ bus-range = <0x00 0xff>;
+ ranges = <0x81000000 0 0 0x0c001000 0 0x00010000>,
+ <0x82000000 0 0x0c011000 0x0c011000 0 0x03feefff>;
+ vdd10-supply = <&ldo6_reg>;
+ vdd18-supply = <&ldo7_reg>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml b/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
new file mode 100644
index 0000000000..844fc71423
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/sifive,fu740-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive FU740 PCIe host controller
+
+description: |+
+ SiFive FU740 PCIe host controller is based on the Synopsys DesignWare
+ PCI core. It shares common features with the PCIe DesignWare core and
+ inherits common properties defined in
+ Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
+
+maintainers:
+ - Paul Walmsley <paul.walmsley@sifive.com>
+ - Greentime Hu <greentime.hu@sifive.com>
+
+allOf:
+ - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+ compatible:
+ const: sifive,fu740-pcie
+
+ reg:
+ maxItems: 3
+
+ reg-names:
+ items:
+ - const: dbi
+ - const: config
+ - const: mgmt
+
+ dma-coherent: true
+
+ num-lanes:
+ const: 8
+
+ msi-parent: true
+
+ interrupt-names:
+ items:
+ - const: msi
+ - const: inta
+ - const: intb
+ - const: intc
+ - const: intd
+
+ resets:
+ description: A phandle to the PCIe power up reset line.
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: pcie_aux
+
+ pwren-gpios:
+ description: Should specify the GPIO for controlling the PCI bus device power on.
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+required:
+ - dma-coherent
+ - num-lanes
+ - interrupts
+ - interrupt-names
+ - interrupt-map-mask
+ - interrupt-map
+ - clocks
+ - clock-names
+ - resets
+ - pwren-gpios
+ - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ #include <dt-bindings/clock/sifive-fu740-prci.h>
+
+ pcie@e00000000 {
+ compatible = "sifive,fu740-pcie";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ reg = <0xe 0x00000000 0x0 0x80000000>,
+ <0xd 0xf0000000 0x0 0x10000000>,
+ <0x0 0x100d0000 0x0 0x1000>;
+ reg-names = "dbi", "config", "mgmt";
+ device_type = "pci";
+ dma-coherent;
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x60080000 0x0 0x60080000 0x0 0x10000>, /* I/O */
+ <0x82000000 0x0 0x60090000 0x0 0x60090000 0x0 0xff70000>, /* mem */
+ <0x82000000 0x0 0x70000000 0x0 0x70000000 0x0 0x1000000>, /* mem */
+ <0xc3000000 0x20 0x00000000 0x20 0x00000000 0x20 0x00000000>; /* mem prefetchable */
+ num-lanes = <0x8>;
+ interrupts = <56>, <57>, <58>, <59>, <60>, <61>, <62>, <63>, <64>;
+ interrupt-names = "msi", "inta", "intb", "intc", "intd";
+ interrupt-parent = <&plic0>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &plic0 57>,
+ <0x0 0x0 0x0 0x2 &plic0 58>,
+ <0x0 0x0 0x0 0x3 &plic0 59>,
+ <0x0 0x0 0x0 0x4 &plic0 60>;
+ clock-names = "pcie_aux";
+ clocks = <&prci FU740_PRCI_CLK_PCIE_AUX>;
+ resets = <&prci 4>;
+ pwren-gpios = <&gpio 5 0>;
+ reset-gpios = <&gpio 8 0>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml
new file mode 100644
index 0000000000..d87e134968
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml
@@ -0,0 +1,266 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/snps,dw-pcie-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DWC PCIe RP/EP controller
+
+maintainers:
+ - Jingoo Han <jingoohan1@gmail.com>
+ - Gustavo Pimentel <gustavo.pimentel@synopsys.com>
+
+description:
+ Generic Synopsys DesignWare PCIe Root Port and Endpoint controller
+ properties.
+
+select: false
+
+properties:
+ reg:
+ description:
+ DWC PCIe CSR space is normally accessed over the dedicated Data Bus
+ Interface - DBI. In accordance with the reference manual the register
+ configuration space belongs to the Configuration-Dependent Module (CDM)
+ and is split up into several sub-parts Standard PCIe configuration
+ space, Port Logic Registers (PL), Shadow Config-space Registers,
+ iATU/eDMA registers. The particular sub-space is selected by the
+ CDM/ELBI (dbi_cs) and CS2 (dbi_cs2) signals (selector bits). Such
+ configuration provides a flexible interface for the system engineers to
+ either map the particular space at a desired MMIO address or just leave
+ them in a contiguous memory space if pure Native or AXI Bridge DBI access
+ is selected. Note the PCIe CFG-space, PL and Shadow registers are
+ specific for each activated function, while the rest of the sub-spaces
+ are common for all of them (if there are more than one).
+ minItems: 2
+ maxItems: 6
+
+ reg-names:
+ minItems: 2
+ maxItems: 6
+
+ interrupts:
+ description:
+ There are two main sub-blocks which are normally capable of
+ generating interrupts. It's System Information Interface and MSI
+ interface. While the former one has some common for the Host and
+ Endpoint controllers IRQ-signals, the later interface is obviously
+ Root Complex specific since it's responsible for the incoming MSI
+ messages signalling. The System Information IRQ signals are mainly
+ responsible for reporting the generic PCIe hierarchy and Root
+ Complex events like VPD IO request, general AER, PME, Hot-plug, link
+ bandwidth change, link equalization request, INTx asserted/deasserted
+ Message detection, embedded DMA Tx/Rx/Error.
+ minItems: 1
+ maxItems: 26
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 26
+
+ clocks:
+ description:
+ DWC PCIe reference manual explicitly defines a set of the clocks required
+ to get the controller working correctly. In general all of them can
+ be divided into two groups':' application and core clocks. Note the
+ platforms may have some of the clock sources unspecified in case if the
+ corresponding domains are fed up from a common clock source.
+ minItems: 1
+ maxItems: 7
+
+ clock-names:
+ minItems: 1
+ maxItems: 7
+ items:
+ oneOf:
+ - description:
+ Data Bus Interface (DBI) clock. Clock signal for the AXI-bus
+ interface of the Configuration-Dependent Module, which is
+ basically the set of the controller CSRs.
+ const: dbi
+ - description:
+ Application AXI-bus Master interface clock. Basically this is
+ a clock for the controller DMA interface (PCI-to-CPU).
+ const: mstr
+ - description:
+ Application AXI-bus Slave interface clock. This is a clock for
+ the CPU-to-PCI memory IO interface.
+ const: slv
+ - description:
+ Controller Core-PCS PIPE interface clock. It's normally
+ supplied by an external PCS-PHY.
+ const: pipe
+ - description:
+ Controller Primary clock. It's assumed that all controller input
+ signals (except resets) are synchronous to this clock.
+ const: core
+ - description:
+ Auxiliary clock for the controller PMC domain. The controller
+ partitioning implies having some parts to operate with this
+ clock in some power management states.
+ const: aux
+ - description:
+ Generic reference clock. In case if there are several
+ interfaces fed up with a common clock source it's advisable to
+ define it with this name (for instance pipe, core and aux can
+ be connected to a single source of the periodic signal).
+ const: ref
+ - description:
+ Clock for the PHY registers interface. Originally this is
+ a PHY-viewport-based interface, but some platform may have
+ specifically designed one.
+ const: phy_reg
+ - description:
+ Vendor-specific clock names. Consider using the generic names
+ above for new bindings.
+ oneOf:
+ - description: See native 'dbi' clock for details
+ enum: [ pcie, pcie_apb_sys, aclk_dbi ]
+ - description: See native 'mstr/slv' clock for details
+ enum: [ pcie_bus, pcie_inbound_axi, pcie_aclk, aclk_mst, aclk_slv ]
+ - description: See native 'pipe' clock for details
+ enum: [ pcie_phy, pcie_phy_ref, link ]
+ - description: See native 'aux' clock for details
+ enum: [ pcie_aux ]
+ - description: See native 'ref' clock for details.
+ enum: [ gio ]
+ - description: See nativs 'phy_reg' clock for details
+ enum: [ pcie_apb_phy, pclk ]
+
+ resets:
+ description:
+ DWC PCIe reference manual explicitly defines a set of the reset
+ signals required to be de-asserted to properly activate the controller
+ sub-parts. All of these signals can be divided into two sub-groups':'
+ application and core resets with respect to the main sub-domains they
+ are supposed to reset. Note the platforms may have some of these signals
+ unspecified in case if they are automatically handled or aggregated into
+ a comprehensive control module.
+ minItems: 1
+ maxItems: 10
+
+ reset-names:
+ minItems: 1
+ maxItems: 10
+ items:
+ oneOf:
+ - description: Data Bus Interface (DBI) domain reset
+ const: dbi
+ - description: AXI-bus Master interface reset
+ const: mstr
+ - description: AXI-bus Slave interface reset
+ const: slv
+ - description: Application-dependent interface reset
+ const: app
+ - description: Controller Non-sticky CSR flags reset
+ const: non-sticky
+ - description: Controller sticky CSR flags reset
+ const: sticky
+ - description: PIPE-interface (Core-PCS) logic reset
+ const: pipe
+ - description:
+ Controller primary reset (resets everything except PMC module)
+ const: core
+ - description: PCS/PHY block reset
+ const: phy
+ - description: PMC hot reset signal
+ const: hot
+ - description: Cold reset signal
+ const: pwr
+ - description:
+ Vendor-specific reset names. Consider using the generic names
+ above for new bindings.
+ oneOf:
+ - description: See native 'app' reset for details
+ enum: [ apps, gio, apb ]
+ - description: See native 'phy' reset for details
+ enum: [ pciephy, link ]
+ - description: See native 'pwr' reset for details
+ enum: [ turnoff ]
+
+ phys:
+ description:
+ There can be up to the number of possible lanes PHYs specified placed in
+ the phandle array in the line-based order. Obviously each the specified
+ PHYs are supposed to be able to work in the PCIe mode with a speed
+ implied by the DWC PCIe controller they are attached to.
+ minItems: 1
+ maxItems: 16
+
+ phy-names:
+ minItems: 1
+ maxItems: 16
+ oneOf:
+ - description: Generic PHY names
+ items:
+ pattern: '^pcie[0-9]+$'
+ - description:
+ Vendor-specific PHY names. Consider using the generic
+ names above for new bindings.
+ items:
+ oneOf:
+ - pattern: '^pcie(-?phy[0-9]*)?$'
+ - pattern: '^p2u-[0-7]$'
+
+ reset-gpio:
+ deprecated: true
+ description:
+ Reference to the GPIO-controlled PERST# signal. It is used to reset all
+ the peripheral devices available on the PCIe bus.
+ maxItems: 1
+
+ reset-gpios:
+ description:
+ Reference to the GPIO-controlled PERST# signal. It is used to reset all
+ the peripheral devices available on the PCIe bus.
+ maxItems: 1
+
+ max-link-speed:
+ maximum: 5
+
+ num-lanes:
+ description:
+ Number of PCIe link lanes to use. Can be omitted if the already brought
+ up link is supposed to be preserved.
+ maximum: 16
+
+ num-ob-windows:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ deprecated: true
+ description:
+ Number of outbound address translation windows. This parameter can be
+ auto-detected based on the iATU memory writability. So there is no
+ point in having a dedicated DT-property for it.
+ maximum: 256
+
+ num-ib-windows:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ deprecated: true
+ description:
+ Number of inbound address translation windows. In the same way as
+ for the outbound AT windows, this parameter can be auto-detected based
+ on the iATU memory writability. There is no point having a dedicated
+ DT-property for it either.
+ maximum: 256
+
+ num-viewport:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ deprecated: true
+ description:
+ Number of outbound view ports configured in hardware. It's the same as
+ the number of outbound AT windows.
+ maximum: 256
+
+ snps,enable-cdm-check:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Enable automatic checking of CDM (Configuration Dependent Module)
+ registers for data corruption. CDM registers include standard PCIe
+ configuration space registers, Port Logic registers, DMA and iATU
+ registers. This feature has been available since DWC PCIe v4.80a.
+
+ dma-coherent: true
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
new file mode 100644
index 0000000000..8fc2151691
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
@@ -0,0 +1,194 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/snps,dw-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare PCIe endpoint interface
+
+maintainers:
+ - Jingoo Han <jingoohan1@gmail.com>
+ - Gustavo Pimentel <gustavo.pimentel@synopsys.com>
+
+description: |
+ Synopsys DesignWare PCIe host controller endpoint
+
+# Please create a separate DT-schema for your DWC PCIe Endpoint controller
+# and make sure it's assigned with the vendor-specific compatible string.
+select:
+ properties:
+ compatible:
+ const: snps,dw-pcie-ep
+ required:
+ - compatible
+
+allOf:
+ - $ref: /schemas/pci/pci-ep.yaml#
+ - $ref: /schemas/pci/snps,dw-pcie-common.yaml#
+
+properties:
+ reg:
+ description:
+ DBI, DBI2 reg-spaces and outbound memory window are required for the
+ normal controller functioning. iATU memory IO region is also required
+ if the space is unrolled (IP-core version >= 4.80a).
+ minItems: 2
+ maxItems: 5
+
+ reg-names:
+ minItems: 2
+ maxItems: 5
+ items:
+ oneOf:
+ - description:
+ Basic DWC PCIe controller configuration-space accessible over
+ the DBI interface. This memory space is either activated with
+ CDM/ELBI = 0 and CS2 = 0 or is a contiguous memory region
+ with all spaces. Note iATU/eDMA CSRs are indirectly accessible
+ via the PL viewports on the DWC PCIe controllers older than
+ v4.80a.
+ const: dbi
+ - description:
+ Shadow DWC PCIe config-space registers. This space is selected
+ by setting CDM/ELBI = 0 and CS2 = 1. This is an intermix of
+ the PCI-SIG PCIe CFG-space with the shadow registers for some
+ PCI Header space, PCI Standard and Extended Structures. It's
+ mainly relevant for the end-point controller configuration,
+ but still there are some shadow registers available for the
+ Root Port mode too.
+ const: dbi2
+ - description:
+ External Local Bus registers. It's an application-dependent
+ registers normally defined by the platform engineers. The space
+ can be selected by setting CDM/ELBI = 1 and CS2 = 0 wires or can
+ be accessed over some platform-specific means (for instance
+ as a part of a system controller).
+ enum: [ elbi, app ]
+ - description:
+ iATU/eDMA registers common for all device functions. It's an
+ unrolled memory space with the internal Address Translation
+ Unit and Enhanced DMA, which is selected by setting CDM/ELBI = 1
+ and CS2 = 1. For IP-core releases prior v4.80a, these registers
+ have been programmed via an indirect addressing scheme using a
+ set of viewport CSRs mapped into the PL space. Note iATU is
+ normally mapped to the 0x0 address of this region, while eDMA
+ is available at 0x80000 base address.
+ const: atu
+ - description:
+ Platform-specific eDMA registers. Some platforms may have eDMA
+ CSRs mapped in a non-standard base address. The registers offset
+ can be changed or the MS/LS-bits of the address can be attached
+ in an additional RTL block before the MEM-IO transactions reach
+ the DW PCIe slave interface.
+ const: dma
+ - description:
+ PHY/PCS configuration registers. Some platforms can have the
+ PCS and PHY CSRs accessible over a dedicated memory mapped
+ region, but mainly these registers are indirectly accessible
+ either by means of the embedded PHY viewport schema or by some
+ platform-specific method.
+ const: phy
+ - description:
+ Outbound iATU-capable memory-region which will be used to
+ generate various application-specific traffic on the PCIe bus
+ hierarchy. It's usage scenario depends on the endpoint
+ functionality, for instance it can be used to create MSI(X)
+ messages.
+ const: addr_space
+ - description:
+ Vendor-specific CSR names. Consider using the generic names above
+ for new bindings.
+ oneOf:
+ - description: See native 'elbi/app' CSR region for details.
+ enum: [ link, appl ]
+ - description: See native 'atu' CSR region for details.
+ enum: [ atu_dma ]
+ allOf:
+ - contains:
+ const: dbi
+ - contains:
+ const: addr_space
+
+ interrupts:
+ description:
+ There is no mandatory IRQ signals for the normal controller functioning,
+ but in addition to the native set the platforms may have a link- or
+ PM-related IRQs specified.
+ minItems: 1
+ maxItems: 20
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 20
+ items:
+ oneOf:
+ - description:
+ Controller request to read or write virtual product data
+ from/to the VPD capability registers.
+ const: vpd
+ - description:
+ Link Equalization Request flag is set in the Link Status 2
+ register (applicable if the corresponding IRQ is enabled in
+ the Link Control 3 register).
+ const: l_eq
+ - description:
+ Indicates that the eDMA Tx/Rx transfer is complete or that an
+ error has occurred on the corresponding channel. eDMA can have
+ eight Tx (Write) and Rx (Read) eDMA channels thus supporting up
+ to 16 IRQ signals all together. Write eDMA channels shall go
+ first in the ordered row as per default edma_int[*] bus setup.
+ pattern: '^dma([0-9]|1[0-5])?$'
+ - description:
+ PCIe protocol correctable error or a Data Path protection
+ correctable error is detected by the automotive/safety
+ feature.
+ const: sft_ce
+ - description:
+ Indicates that the internal safety mechanism has detected an
+ uncorrectable error.
+ const: sft_ue
+ - description:
+ Application-specific IRQ raised depending on the vendor-specific
+ events basis.
+ const: app
+ - description:
+ Vendor-specific IRQ names. Consider using the generic names above
+ for new bindings.
+ oneOf:
+ - description: See native "app" IRQ for details
+ enum: [ intr ]
+
+ max-functions:
+ maximum: 32
+
+required:
+ - compatible
+ - reg
+ - reg-names
+
+additionalProperties: true
+
+examples:
+ - |
+ pcie-ep@dfd00000 {
+ compatible = "snps,dw-pcie-ep";
+ reg = <0xdfc00000 0x0001000>, /* IP registers 1 */
+ <0xdfc01000 0x0001000>, /* IP registers 2 */
+ <0xd0000000 0x2000000>; /* Configuration space */
+ reg-names = "dbi", "dbi2", "addr_space";
+
+ interrupts = <23>, <24>;
+ interrupt-names = "dma0", "dma1";
+
+ clocks = <&sys_clk 12>, <&sys_clk 24>;
+ clock-names = "dbi", "ref";
+
+ resets = <&sys_rst 12>, <&sys_rst 24>;
+ reset-names = "dbi", "phy";
+
+ phys = <&pcie_phy0>, <&pcie_phy1>, <&pcie_phy2>, <&pcie_phy3>;
+ phy-names = "pcie0", "pcie1", "pcie2", "pcie3";
+
+ max-link-speed = <3>;
+ max-functions = /bits/ 8 <4>;
+ };
diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
new file mode 100644
index 0000000000..8bbdeb8821
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
@@ -0,0 +1,242 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/snps,dw-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare PCIe interface
+
+maintainers:
+ - Jingoo Han <jingoohan1@gmail.com>
+ - Gustavo Pimentel <gustavo.pimentel@synopsys.com>
+
+description: |
+ Synopsys DesignWare PCIe host controller
+
+# Please create a separate DT-schema for your DWC PCIe Root Port controller
+# and make sure it's assigned with the vendor-specific compatible string.
+select:
+ properties:
+ compatible:
+ const: snps,dw-pcie
+ required:
+ - compatible
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: /schemas/pci/snps,dw-pcie-common.yaml#
+ - if:
+ not:
+ required:
+ - msi-map
+ then:
+ properties:
+ interrupt-names:
+ contains:
+ const: msi
+
+properties:
+ reg:
+ description:
+ At least DBI reg-space and peripheral devices CFG-space outbound window
+ are required for the normal controller work. iATU memory IO region is
+ also required if the space is unrolled (IP-core version >= 4.80a).
+ minItems: 2
+ maxItems: 5
+
+ reg-names:
+ minItems: 2
+ maxItems: 5
+ items:
+ oneOf:
+ - description:
+ Basic DWC PCIe controller configuration-space accessible over
+ the DBI interface. This memory space is either activated with
+ CDM/ELBI = 0 and CS2 = 0 or is a contiguous memory region
+ with all spaces. Note iATU/eDMA CSRs are indirectly accessible
+ via the PL viewports on the DWC PCIe controllers older than
+ v4.80a.
+ const: dbi
+ - description:
+ Shadow DWC PCIe config-space registers. This space is selected
+ by setting CDM/ELBI = 0 and CS2 = 1. This is an intermix of
+ the PCI-SIG PCIe CFG-space with the shadow registers for some
+ PCI Header space, PCI Standard and Extended Structures. It's
+ mainly relevant for the end-point controller configuration,
+ but still there are some shadow registers available for the
+ Root Port mode too.
+ const: dbi2
+ - description:
+ External Local Bus registers. It's an application-dependent
+ registers normally defined by the platform engineers. The space
+ can be selected by setting CDM/ELBI = 1 and CS2 = 0 wires or can
+ be accessed over some platform-specific means (for instance
+ as a part of a system controller).
+ enum: [ elbi, app ]
+ - description:
+ iATU/eDMA registers common for all device functions. It's an
+ unrolled memory space with the internal Address Translation
+ Unit and Enhanced DMA, which is selected by setting CDM/ELBI = 1
+ and CS2 = 1. For IP-core releases prior v4.80a, these registers
+ have been programmed via an indirect addressing scheme using a
+ set of viewport CSRs mapped into the PL space. Note iATU is
+ normally mapped to the 0x0 address of this region, while eDMA
+ is available at 0x80000 base address.
+ const: atu
+ - description:
+ Platform-specific eDMA registers. Some platforms may have eDMA
+ CSRs mapped in a non-standard base address. The registers offset
+ can be changed or the MS/LS-bits of the address can be attached
+ in an additional RTL block before the MEM-IO transactions reach
+ the DW PCIe slave interface.
+ const: dma
+ - description:
+ PHY/PCS configuration registers. Some platforms can have the
+ PCS and PHY CSRs accessible over a dedicated memory mapped
+ region, but mainly these registers are indirectly accessible
+ either by means of the embedded PHY viewport schema or by some
+ platform-specific method.
+ const: phy
+ - description:
+ Outbound iATU-capable memory-region which will be used to access
+ the peripheral PCIe devices configuration space.
+ const: config
+ - description:
+ Vendor-specific CSR names. Consider using the generic names above
+ for new bindings.
+ oneOf:
+ - description: See native 'elbi/app' CSR region for details.
+ enum: [ apb, mgmt, link, ulreg, appl ]
+ - description: See native 'atu' CSR region for details.
+ enum: [ atu_dma ]
+ - description: Syscon-related CSR regions.
+ enum: [ smu, mpu ]
+ - description: Tegra234 aperture
+ enum: [ ecam ]
+ allOf:
+ - contains:
+ const: dbi
+ - contains:
+ const: config
+
+ interrupts:
+ description:
+ DWC PCIe Root Port/Complex specific IRQ signals. At least MSI interrupt
+ signal is supposed to be specified for the host controller.
+ minItems: 1
+ maxItems: 26
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 26
+ items:
+ oneOf:
+ - description:
+ Controller request to read or write virtual product data
+ from/to the VPD capability registers.
+ const: vpd
+ - description:
+ Link Equalization Request flag is set in the Link Status 2
+ register (applicable if the corresponding IRQ is enabled in
+ the Link Control 3 register).
+ const: l_eq
+ - description:
+ Indicates that the eDMA Tx/Rx transfer is complete or that an
+ error has occurred on the corresponding channel. eDMA can have
+ eight Tx (Write) and Rx (Read) eDMA channels thus supporting up
+ to 16 IRQ signals all together. Write eDMA channels shall go
+ first in the ordered row as per default edma_int[*] bus setup.
+ pattern: '^dma([0-9]|1[0-5])?$'
+ - description:
+ PCIe protocol correctable error or a Data Path protection
+ correctable error is detected by the automotive/safety
+ feature.
+ const: sft_ce
+ - description:
+ Indicates that the internal safety mechanism has detected an
+ uncorrectable error.
+ const: sft_ue
+ - description:
+ Application-specific IRQ raised depending on the vendor-specific
+ events basis.
+ const: app
+ - description:
+ DSP AXI MSI Interrupt detected. It gets de-asserted when there is
+ no more MSI interrupt pending. The interrupt is relevant to the
+ iMSI-RX - Integrated MSI Receiver (AXI bridge).
+ const: msi
+ - description:
+ Legacy A/B/C/D interrupt signal. Basically it's triggered by
+ receiving a Assert_INT{A,B,C,D}/Desassert_INT{A,B,C,D} message
+ from the downstream device.
+ pattern: "^int(a|b|c|d)$"
+ - description:
+ Error condition detected and a flag is set in the Root Error Status
+ register of the AER capability. It's asserted when the RC
+ internally generated an error or an error message is received by
+ the RC.
+ const: aer
+ - description:
+ PME message is received by the port. That means having the PME
+ status bit set in the Root Status register (the event is
+ supposed to be unmasked in the Root Control register).
+ const: pme
+ - description:
+ Hot-plug event is detected. That is a bit has been set in the
+ Slot Status register and the corresponding event is enabled in
+ the Slot Control register.
+ const: hp
+ - description:
+ Link Autonomous Bandwidth Status flag has been set in the Link
+ Status register (the event is supposed to be unmasked in the
+ Link Control register).
+ const: bw_au
+ - description:
+ Bandwidth Management Status flag has been set in the Link
+ Status register (the event is supposed to be unmasked in the
+ Link Control register).
+ const: bw_mg
+ - description:
+ Combined Legacy A/B/C/D interrupt signal. See "^int(a|b|c|d)$" for
+ details.
+ const: legacy
+ - description:
+ Vendor-specific IRQ names. Consider using the generic names above
+ for new bindings.
+ oneOf:
+ - description: See native "app" IRQ for details
+ enum: [ intr, sys, pmc, msg, err ]
+
+additionalProperties: true
+
+required:
+ - compatible
+ - reg
+ - reg-names
+
+examples:
+ - |
+ pcie@dfc00000 {
+ compatible = "snps,dw-pcie";
+ device_type = "pci";
+ reg = <0xdfc00000 0x0001000>, /* IP registers */
+ <0xd0000000 0x0002000>; /* Configuration space */
+ reg-names = "dbi", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000>,
+ <0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>;
+ bus-range = <0x0 0xff>;
+
+ interrupts = <25>, <24>;
+ interrupt-names = "msi", "hp";
+ #interrupt-cells = <1>;
+
+ reset-gpios = <&port0 0 1>;
+
+ phys = <&pcie_phy>;
+ phy-names = "pcie";
+
+ num-lanes = <1>;
+ max-link-speed = <3>;
+ };
diff --git a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml
new file mode 100644
index 0000000000..f0d8e486a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/socionext,uniphier-pcie-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier PCIe endpoint controller
+
+description: |
+ UniPhier PCIe endpoint controller is based on the Synopsys DesignWare
+ PCI core. It shares common features with the PCIe DesignWare core and
+ inherits common properties defined in
+ Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml.
+
+maintainers:
+ - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+properties:
+ compatible:
+ enum:
+ - socionext,uniphier-pro5-pcie-ep
+ - socionext,uniphier-nx1-pcie-ep
+
+ reg:
+ minItems: 4
+ maxItems: 5
+
+ reg-names:
+ minItems: 4
+ items:
+ - const: dbi
+ - const: dbi2
+ - const: link
+ - const: addr_space
+ - const: atu
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names: true
+
+ resets:
+ minItems: 1
+ maxItems: 2
+
+ reset-names: true
+
+ num-ib-windows:
+ const: 16
+
+ num-ob-windows:
+ const: 16
+
+ num-lanes: true
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ const: pcie-phy
+
+allOf:
+ - $ref: /schemas/pci/snps,dw-pcie-ep.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: socionext,uniphier-pro5-pcie-ep
+ then:
+ properties:
+ reg:
+ maxItems: 4
+ reg-names:
+ maxItems: 4
+ clocks:
+ minItems: 2
+ clock-names:
+ items:
+ - const: gio
+ - const: link
+ resets:
+ minItems: 2
+ reset-names:
+ items:
+ - const: gio
+ - const: link
+ else:
+ properties:
+ reg:
+ minItems: 5
+ reg-names:
+ minItems: 5
+ clocks:
+ maxItems: 1
+ clock-names:
+ const: link
+ resets:
+ maxItems: 1
+ reset-names:
+ const: link
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ pcie_ep: pcie-ep@66000000 {
+ compatible = "socionext,uniphier-pro5-pcie-ep";
+ reg-names = "dbi", "dbi2", "link", "addr_space";
+ reg = <0x66000000 0x1000>, <0x66001000 0x1000>,
+ <0x66010000 0x10000>, <0x67000000 0x400000>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 24>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 24>;
+ num-ib-windows = <16>;
+ num-ob-windows = <16>;
+ num-lanes = <4>;
+ phy-names = "pcie-phy";
+ phys = <&pcie_phy>;
+ };
diff --git a/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie.yaml b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie.yaml
new file mode 100644
index 0000000000..638b99db04
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/socionext,uniphier-pcie.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/socionext,uniphier-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier PCIe host controller
+
+description: |
+ UniPhier PCIe host controller is based on the Synopsys DesignWare
+ PCI core. It shares common features with the PCIe DesignWare core and
+ inherits common properties defined in
+ Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
+
+maintainers:
+ - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+
+allOf:
+ - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+ compatible:
+ enum:
+ - socionext,uniphier-pcie
+
+ reg:
+ minItems: 3
+ maxItems: 4
+
+ reg-names:
+ minItems: 3
+ items:
+ - const: dbi
+ - const: link
+ - const: config
+ - const: atu
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ num-viewport: true
+
+ num-lanes: true
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ const: pcie-phy
+
+ interrupt-controller:
+ type: object
+ additionalProperties: false
+
+ properties:
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - resets
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ bus {
+ gic: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+ };
+
+ pcie: pcie@66000000 {
+ compatible = "socionext,uniphier-pcie";
+ reg-names = "dbi", "link", "config";
+ reg = <0x66000000 0x1000>, <0x66010000 0x10000>, <0x2fff0000 0x10000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ clocks = <&sys_clk 24>;
+ resets = <&sys_rst 24>;
+ num-lanes = <1>;
+ num-viewport = <1>;
+ bus-range = <0x0 0xff>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0x00000000 0x2ffe0000 0 0x00010000>,
+ <0x82000000 0 0x00000000 0x20000000 0 0x0ffe0000>;
+ phy-names = "pcie-phy";
+ phys = <&pcie_phy>;
+ #interrupt-cells = <1>;
+ interrupt-names = "dma", "msi";
+ interrupt-parent = <&gic>;
+ interrupts = <0 224 4>, <0 225 4>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc 0>,
+ <0 0 0 2 &pcie_intc 1>,
+ <0 0 0 3 &pcie_intc 2>,
+ <0 0 0 4 &pcie_intc 3>;
+
+ pcie_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 226 4>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt b/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt
new file mode 100644
index 0000000000..d5a14f5dad
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt
@@ -0,0 +1,14 @@
+SPEAr13XX PCIe DT detail:
+================================
+
+SPEAr13XX uses the Synopsys DesignWare PCIe controller and ST MiPHY as PHY
+controller.
+
+Required properties:
+- compatible : should be "st,spear1340-pcie", "snps,dw-pcie".
+- phys : phandle to PHY node associated with PCIe controller
+- phy-names : must be "pcie-phy"
+- All other definitions as per generic PCI bindings
+
+ Optional properties:
+- st,pcie-is-gen1 indicates that forced gen1 initialization is needed.
diff --git a/Documentation/devicetree/bindings/pci/ti,am65-pci-ep.yaml b/Documentation/devicetree/bindings/pci/ti,am65-pci-ep.yaml
new file mode 100644
index 0000000000..74195c1f52
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/ti,am65-pci-ep.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2021 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/ti,am65-pci-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI AM65 PCI Endpoint
+
+maintainers:
+ - Kishon Vijay Abraham I <kishon@ti.com>
+
+allOf:
+ - $ref: pci-ep.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ti,am654-pcie-ep
+
+ reg:
+ maxItems: 4
+
+ reg-names:
+ items:
+ - const: app
+ - const: dbics
+ - const: addr_space
+ - const: atu
+
+ power-domains:
+ maxItems: 1
+
+ ti,syscon-pcie-mode:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: Phandle to the SYSCON entry
+ - description: pcie_ctrl register offset within SYSCON
+ description: Phandle to the SYSCON entry required for configuring PCIe in RC or EP mode.
+
+ interrupts:
+ minItems: 1
+
+ dma-coherent: true
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - max-link-speed
+ - power-domains
+ - ti,syscon-pcie-mode
+ - dma-coherent
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+ pcie0_ep: pcie-ep@5500000 {
+ compatible = "ti,am654-pcie-ep";
+ reg = <0x5500000 0x1000>,
+ <0x5501000 0x1000>,
+ <0x10000000 0x8000000>,
+ <0x5506000 0x1000>;
+ reg-names = "app", "dbics", "addr_space", "atu";
+ power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
+ ti,syscon-pcie-mode = <&scm_conf 0x4060>;
+ max-link-speed = <2>;
+ dma-coherent;
+ interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+ };
diff --git a/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml
new file mode 100644
index 0000000000..a20dccbafd
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2021 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/ti,am65-pci-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI AM65 PCI Host
+
+maintainers:
+ - Kishon Vijay Abraham I <kishon@ti.com>
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ti,am654-pcie-rc
+ - ti,keystone-pcie
+
+ reg:
+ maxItems: 4
+
+ reg-names:
+ items:
+ - const: app
+ - const: dbics
+ - const: config
+ - const: atu
+
+ interrupts:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ ti,syscon-pcie-id:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: Phandle to the SYSCON entry
+ - description: pcie_device_id register offset within SYSCON
+ description: Phandle to the SYSCON entry required for getting PCIe device/vendor ID
+
+ ti,syscon-pcie-mode:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: Phandle to the SYSCON entry
+ - description: pcie_ctrl register offset within SYSCON
+ description: Phandle to the SYSCON entry required for configuring PCIe in RC or EP mode.
+
+ msi-map: true
+
+ dma-coherent: true
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - max-link-speed
+ - ti,syscon-pcie-id
+ - ti,syscon-pcie-mode
+ - ranges
+
+if:
+ properties:
+ compatible:
+ enum:
+ - ti,am654-pcie-rc
+then:
+ required:
+ - dma-coherent
+ - power-domains
+ - msi-map
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+ pcie0_rc: pcie@5500000 {
+ compatible = "ti,am654-pcie-rc";
+ reg = <0x5500000 0x1000>,
+ <0x5501000 0x1000>,
+ <0x10000000 0x2000>,
+ <0x5506000 0x1000>;
+ reg-names = "app", "dbics", "config", "atu";
+ power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x81000000 0 0 0x10020000 0 0x00010000>,
+ <0x82000000 0 0x10030000 0x10030000 0 0x07FD0000>;
+ ti,syscon-pcie-id = <&scm_conf 0x0210>;
+ ti,syscon-pcie-mode = <&scm_conf 0x4060>;
+ bus-range = <0x0 0xff>;
+ max-link-speed = <2>;
+ dma-coherent;
+ interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+ msi-map = <0x0 &gic_its 0x0 0x10000>;
+ device_type = "pci";
+ };
diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml
new file mode 100644
index 0000000000..62292185fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/ti,j721e-pci-ep.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI J721E PCI EP (PCIe Wrapper)
+
+maintainers:
+ - Kishon Vijay Abraham I <kishon@ti.com>
+
+allOf:
+ - $ref: cdns-pcie-ep.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: ti,j721e-pcie-ep
+ - description: PCIe EP controller in AM64
+ items:
+ - const: ti,am64-pcie-ep
+ - const: ti,j721e-pcie-ep
+ - description: PCIe EP controller in J7200
+ items:
+ - const: ti,j7200-pcie-ep
+ - const: ti,j721e-pcie-ep
+
+ reg:
+ maxItems: 4
+
+ reg-names:
+ items:
+ - const: intd_cfg
+ - const: user_cfg
+ - const: reg
+ - const: mem
+
+ ti,syscon-pcie-ctrl:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: Phandle to the SYSCON entry
+ - description: pcie_ctrl register offset within SYSCON
+ description: Specifier for configuring PCIe mode and link speed.
+
+ power-domains:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+ description: clock-specifier to represent input to the PCIe
+
+ clock-names:
+ items:
+ - const: fck
+
+ dma-coherent:
+ description: Indicates that the PCIe IP block can ensure the coherency
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ items:
+ - const: link_state
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - ti,syscon-pcie-ctrl
+ - max-link-speed
+ - num-lanes
+ - power-domains
+ - clocks
+ - clock-names
+ - max-functions
+ - phys
+ - phy-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie0_ep: pcie-ep@d000000 {
+ compatible = "ti,j721e-pcie-ep";
+ reg = <0x00 0x02900000 0x00 0x1000>,
+ <0x00 0x02907000 0x00 0x400>,
+ <0x00 0x0d000000 0x00 0x00800000>,
+ <0x00 0x10000000 0x00 0x08000000>;
+ reg-names = "intd_cfg", "user_cfg", "reg", "mem";
+ ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x4070>;
+ max-link-speed = <3>;
+ num-lanes = <2>;
+ power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 239 1>;
+ clock-names = "fck";
+ max-functions = /bits/ 8 <6>;
+ dma-coherent;
+ phys = <&serdes0_pcie_link>;
+ phy-names = "pcie-phy";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
new file mode 100644
index 0000000000..a2c5eaea57
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/ti,j721e-pci-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI J721E PCI Host (PCIe Wrapper)
+
+maintainers:
+ - Kishon Vijay Abraham I <kishon@ti.com>
+
+allOf:
+ - $ref: cdns-pcie-host.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: ti,j721e-pcie-host
+ - description: PCIe controller in AM64
+ items:
+ - const: ti,am64-pcie-host
+ - const: ti,j721e-pcie-host
+ - description: PCIe controller in J7200
+ items:
+ - const: ti,j7200-pcie-host
+ - const: ti,j721e-pcie-host
+
+ reg:
+ maxItems: 4
+
+ reg-names:
+ items:
+ - const: intd_cfg
+ - const: user_cfg
+ - const: reg
+ - const: cfg
+
+ ti,syscon-pcie-ctrl:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: Phandle to the SYSCON entry
+ - description: pcie_ctrl register offset within SYSCON
+ description: Specifier for configuring PCIe mode and link speed.
+
+ power-domains:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+ description: |+
+ clock-specifier to represent input to the PCIe for 1 item.
+ 2nd item if present represents reference clock to the connector.
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: fck
+ - const: pcie_refclk
+
+ dma-coherent: true
+
+ vendor-id:
+ const: 0x104c
+
+ device-id:
+ enum:
+ - 0xb00d
+ - 0xb00f
+ - 0xb010
+ - 0xb013
+
+ msi-map: true
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ items:
+ - const: link_state
+
+ interrupt-controller:
+ type: object
+ additionalProperties: false
+
+ properties:
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - ti,syscon-pcie-ctrl
+ - max-link-speed
+ - num-lanes
+ - power-domains
+ - clocks
+ - clock-names
+ - vendor-id
+ - device-id
+ - msi-map
+ - dma-ranges
+ - ranges
+ - reset-gpios
+ - phys
+ - phy-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/soc/ti,sci_pm_domain.h>
+ #include <dt-bindings/gpio/gpio.h>
+
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie0_rc: pcie@2900000 {
+ compatible = "ti,j721e-pcie-host";
+ reg = <0x00 0x02900000 0x00 0x1000>,
+ <0x00 0x02907000 0x00 0x400>,
+ <0x00 0x0d000000 0x00 0x00800000>,
+ <0x00 0x10000000 0x00 0x00001000>;
+ reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+ ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x4070>;
+ max-link-speed = <3>;
+ num-lanes = <2>;
+ power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 239 1>;
+ clock-names = "fck";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x0 0xf>;
+ vendor-id = <0x104c>;
+ device-id = <0xb00d>;
+ msi-map = <0x0 &gic_its 0x0 0x10000>;
+ dma-coherent;
+ reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>;
+ phys = <&serdes0_pcie_link>;
+ phy-names = "pcie-phy";
+ ranges = <0x01000000 0x0 0x10001000 0x00 0x10001000 0x0 0x0010000>,
+ <0x02000000 0x0 0x10011000 0x00 0x10011000 0x0 0x7fef000>;
+ dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt
new file mode 100644
index 0000000000..8147e3e3e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/ti-pci.txt
@@ -0,0 +1,102 @@
+TI PCI Controllers
+
+PCIe DesignWare Controller
+ - compatible: Should be "ti,dra7-pcie" for RC (deprecated)
+ Should be "ti,dra7-pcie-ep" for EP (deprecated)
+ Should be "ti,dra746-pcie-rc" for dra74x/dra76 in RC mode
+ Should be "ti,dra746-pcie-ep" for dra74x/dra76 in EP mode
+ Should be "ti,dra726-pcie-rc" for dra72x in RC mode
+ Should be "ti,dra726-pcie-ep" for dra72x in EP mode
+ - phys : list of PHY specifiers (used by generic PHY framework)
+ - phy-names : must be "pcie-phy0", "pcie-phy1", "pcie-phyN".. based on the
+ number of PHYs as specified in *phys* property.
+ - ti,hwmods : Name of the hwmod associated to the pcie, "pcie<X>",
+ where <X> is the instance number of the pcie from the HW spec.
+ - num-lanes as specified in ../snps,dw-pcie.yaml
+ - ti,syscon-lane-sel : phandle/offset pair. Phandle to the system control
+ module and the register offset to specify lane
+ selection.
+
+HOST MODE
+=========
+ - reg : Two register ranges as listed in the reg-names property
+ - reg-names : The first entry must be "ti-conf" for the TI-specific registers
+ The second entry must be "rc-dbics" for the DesignWare PCIe
+ registers
+ The third entry must be "config" for the PCIe configuration space
+ - interrupts : Two interrupt entries must be specified. The first one is for
+ main interrupt line and the second for MSI interrupt line.
+ - #address-cells,
+ #size-cells,
+ #interrupt-cells,
+ device_type,
+ ranges,
+ interrupt-map-mask,
+ interrupt-map : as specified in ../snps,dw-pcie.yaml
+ - ti,syscon-unaligned-access: phandle to the syscon DT node. The 1st argument
+ should contain the register offset within syscon
+ and the 2nd argument should contain the bit field
+ for setting the bit to enable unaligned
+ access.
+
+DEVICE MODE
+===========
+ - reg : Four register ranges as listed in the reg-names property
+ - reg-names : "ti-conf" for the TI-specific registers
+ "ep_dbics" for the standard configuration registers as
+ they are locally accessed within the DIF CS space
+ "ep_dbics2" for the standard configuration registers as
+ they are locally accessed within the DIF CS2 space
+ "addr_space" used to map remote RC address space
+ - interrupts : one interrupt entries must be specified for main interrupt.
+ - num-ib-windows : number of inbound address translation windows
+ - num-ob-windows : number of outbound address translation windows
+ - ti,syscon-unaligned-access: phandle to the syscon DT node. The 1st argument
+ should contain the register offset within syscon
+ and the 2nd argument should contain the bit field
+ for setting the bit to enable unaligned
+ access.
+
+Optional Property:
+ - gpios : Should be added if a GPIO line is required to drive PERST# line
+
+NOTE: Two DT nodes may be added for each PCI controller; one for host
+mode and another for device mode. So in order for PCI to
+work in host mode, EP mode DT node should be disabled and in order to PCI to
+work in EP mode, host mode DT node should be disabled. Host mode and EP
+mode are mutually exclusive.
+
+Example:
+axi {
+ compatible = "simple-bus";
+ #size-cells = <1>;
+ #address-cells = <1>;
+ ranges = <0x51000000 0x51000000 0x3000
+ 0x0 0x20000000 0x10000000>;
+ pcie@51000000 {
+ compatible = "ti,dra7-pcie";
+ reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
+ reg-names = "rc_dbics", "ti_conf", "config";
+ interrupts = <0 232 0x4>, <0 233 0x4>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0 0x03000 0 0x00010000
+ 0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+ #interrupt-cells = <1>;
+ num-lanes = <1>;
+ ti,hwmods = "pcie1";
+ phys = <&pcie1_phy>;
+ phy-names = "pcie-phy0";
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc 1>,
+ <0 0 0 2 &pcie_intc 2>,
+ <0 0 0 3 &pcie_intc 3>,
+ <0 0 0 4 &pcie_intc 4>;
+ pcie_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
new file mode 100644
index 0000000000..53da2edd7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/toshiba,visconti-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti5 SoC PCIe Host Controller
+
+maintainers:
+ - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+description:
+ Toshiba Visconti5 SoC PCIe host controller is based on the Synopsys DesignWare PCIe IP.
+
+allOf:
+ - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+ compatible:
+ const: toshiba,visconti-pcie
+
+ reg:
+ items:
+ - description: Data Bus Interface (DBI) registers.
+ - description: PCIe configuration space region.
+ - description: Visconti specific additional registers.
+ - description: Visconti specific SMU registers
+ - description: Visconti specific memory protection unit registers (MPU)
+
+ reg-names:
+ items:
+ - const: dbi
+ - const: config
+ - const: ulreg
+ - const: smu
+ - const: mpu
+
+ interrupts:
+ maxItems: 2
+
+ clocks:
+ items:
+ - description: PCIe reference clock
+ - description: PCIe system clock
+ - description: Auxiliary clock
+
+ clock-names:
+ items:
+ - const: ref
+ - const: core
+ - const: aux
+
+ num-lanes:
+ const: 2
+
+required:
+ - reg
+ - reg-names
+ - interrupts
+ - "#interrupt-cells"
+ - interrupt-map
+ - interrupt-map-mask
+ - num-lanes
+ - clocks
+ - clock-names
+ - max-link-speed
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pcie: pcie@28400000 {
+ compatible = "toshiba,visconti-pcie";
+ reg = <0x0 0x28400000 0x0 0x00400000>,
+ <0x0 0x70000000 0x0 0x10000000>,
+ <0x0 0x28050000 0x0 0x00010000>,
+ <0x0 0x24200000 0x0 0x00002000>,
+ <0x0 0x24162000 0x0 0x00001000>;
+ reg-names = "dbi", "config", "ulreg", "smu", "mpu";
+ device_type = "pci";
+ bus-range = <0x00 0xff>;
+ num-lanes = <2>;
+ num-viewport = <8>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ ranges = <0x81000000 0 0x40000000 0 0x40000000 0 0x00010000>,
+ <0x82000000 0 0x50000000 0 0x50000000 0 0x20000000>;
+ interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi", "intr";
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map =
+ <0 0 0 1 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
+ 0 0 0 2 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
+ 0 0 0 3 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH
+ 0 0 0 4 &gic GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&extclk100mhz>, <&clk600mhz>, <&clk25mhz>;
+ clock-names = "ref", "core", "aux";
+ max-link-speed = <2>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt b/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt
new file mode 100644
index 0000000000..11063293f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt
@@ -0,0 +1,76 @@
+V3 Semiconductor V360 EPC PCI bridge
+
+This bridge is found in the ARM Integrator/AP (Application Platform)
+
+Required properties:
+- compatible: should be one of:
+ "v3,v360epc-pci"
+ "arm,integrator-ap-pci", "v3,v360epc-pci"
+- reg: should contain two register areas:
+ first the base address of the V3 host bridge controller, 64KB
+ second the configuration area register space, 16MB
+- interrupts: should contain a reference to the V3 error interrupt
+ as routed on the system.
+- bus-range: see pci.txt
+- ranges: this follows the standard PCI bindings in the IEEE Std
+ 1275-1994 (see pci.txt) with the following restriction:
+ - The non-prefetchable and prefetchable memory windows must
+ each be exactly 256MB (0x10000000) in size.
+ - The prefetchable memory window must be immediately adjacent
+ to the non-prefetcable memory window
+- dma-ranges: three ranges for the inbound memory region. The ranges must
+ be aligned to a 1MB boundary, and may be 1MB, 2MB, 4MB, 8MB, 16MB, 32MB,
+ 64MB, 128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked
+ as pre-fetchable. Two ranges are supported by the hardware.
+
+Integrator-specific required properties:
+- syscon: should contain a link to the syscon device node, since
+ on the Integrator, some registers in the syscon are required to
+ operate the V3 host bridge.
+
+Example:
+
+pci: pciv3@62000000 {
+ compatible = "arm,integrator-ap-pci", "v3,v360epc-pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0x62000000 0x10000>, <0x61000000 0x01000000>;
+ interrupt-parent = <&pic>;
+ interrupts = <17>; /* Bus error IRQ */
+ clocks = <&pciclk>;
+ bus-range = <0x00 0xff>;
+ ranges = 0x01000000 0 0x00000000 /* I/O space @00000000 */
+ 0x60000000 0 0x01000000 /* 16 MiB @ LB 60000000 */
+ 0x02000000 0 0x40000000 /* non-prefectable memory @40000000 */
+ 0x40000000 0 0x10000000 /* 256 MiB @ LB 40000000 1:1 */
+ 0x42000000 0 0x50000000 /* prefetchable memory @50000000 */
+ 0x50000000 0 0x10000000>; /* 256 MiB @ LB 50000000 1:1 */
+ dma-ranges = <0x02000000 0 0x20000000 /* EBI memory space */
+ 0x20000000 0 0x20000000 /* 512 MB @ LB 20000000 1:1 */
+ 0x02000000 0 0x80000000 /* Core module alias memory */
+ 0x80000000 0 0x40000000>; /* 1GB @ LB 80000000 */
+ interrupt-map-mask = <0xf800 0 0 0x7>;
+ interrupt-map = <
+ /* IDSEL 9 */
+ 0x4800 0 0 1 &pic 13 /* INT A on slot 9 is irq 13 */
+ 0x4800 0 0 2 &pic 14 /* INT B on slot 9 is irq 14 */
+ 0x4800 0 0 3 &pic 15 /* INT C on slot 9 is irq 15 */
+ 0x4800 0 0 4 &pic 16 /* INT D on slot 9 is irq 16 */
+ /* IDSEL 10 */
+ 0x5000 0 0 1 &pic 14 /* INT A on slot 10 is irq 14 */
+ 0x5000 0 0 2 &pic 15 /* INT B on slot 10 is irq 15 */
+ 0x5000 0 0 3 &pic 16 /* INT C on slot 10 is irq 16 */
+ 0x5000 0 0 4 &pic 13 /* INT D on slot 10 is irq 13 */
+ /* IDSEL 11 */
+ 0x5800 0 0 1 &pic 15 /* INT A on slot 11 is irq 15 */
+ 0x5800 0 0 2 &pic 16 /* INT B on slot 11 is irq 16 */
+ 0x5800 0 0 3 &pic 13 /* INT C on slot 11 is irq 13 */
+ 0x5800 0 0 4 &pic 14 /* INT D on slot 11 is irq 14 */
+ /* IDSEL 12 */
+ 0x6000 0 0 1 &pic 16 /* INT A on slot 12 is irq 16 */
+ 0x6000 0 0 2 &pic 13 /* INT B on slot 12 is irq 13 */
+ 0x6000 0 0 3 &pic 14 /* INT C on slot 12 is irq 14 */
+ 0x6000 0 0 4 &pic 15 /* INT D on slot 12 is irq 15 */
+ >;
+};
diff --git a/Documentation/devicetree/bindings/pci/versatile.yaml b/Documentation/devicetree/bindings/pci/versatile.yaml
new file mode 100644
index 0000000000..09748ef6b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/versatile.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/versatile.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM Versatile Platform Baseboard PCI interface
+
+maintainers:
+ - Rob Herring <robh@kernel.org>
+
+description: |+
+ PCI host controller found on the ARM Versatile PB board's FPGA.
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+ compatible:
+ const: arm,versatile-pci
+
+ reg:
+ items:
+ - description: Versatile-specific registers
+ - description: Self Config space
+ - description: Config space
+
+ ranges:
+ maxItems: 3
+
+ "#interrupt-cells": true
+
+ interrupt-map:
+ maxItems: 16
+
+ interrupt-map-mask:
+ items:
+ - const: 0x1800
+ - const: 0
+ - const: 0
+ - const: 7
+
+required:
+ - compatible
+ - reg
+ - ranges
+ - "#interrupt-cells"
+ - interrupt-map
+ - interrupt-map-mask
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ pci@10001000 {
+ compatible = "arm,versatile-pci";
+ device_type = "pci";
+ reg = <0x10001000 0x1000>,
+ <0x41000000 0x10000>,
+ <0x42000000 0x100000>;
+ bus-range = <0 0xff>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+
+ ranges =
+ <0x01000000 0 0x00000000 0x43000000 0 0x00010000>, /* downstream I/O */
+ <0x02000000 0 0x50000000 0x50000000 0 0x10000000>, /* non-prefetchable memory */
+ <0x42000000 0 0x60000000 0x60000000 0 0x10000000>; /* prefetchable memory */
+
+ interrupt-map-mask = <0x1800 0 0 7>;
+ interrupt-map = <0x1800 0 0 1 &sic 28>,
+ <0x1800 0 0 2 &sic 29>,
+ <0x1800 0 0 3 &sic 30>,
+ <0x1800 0 0 4 &sic 27>,
+
+ <0x1000 0 0 1 &sic 27>,
+ <0x1000 0 0 2 &sic 28>,
+ <0x1000 0 0 3 &sic 29>,
+ <0x1000 0 0 4 &sic 30>,
+
+ <0x0800 0 0 1 &sic 30>,
+ <0x0800 0 0 2 &sic 27>,
+ <0x0800 0 0 3 &sic 28>,
+ <0x0800 0 0 4 &sic 29>,
+
+ <0x0000 0 0 1 &sic 29>,
+ <0x0000 0 0 2 &sic 30>,
+ <0x0000 0 0 3 &sic 27>,
+ <0x0000 0 0 4 &sic 28>;
+ };
+
+
+...
diff --git a/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt b/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt
new file mode 100644
index 0000000000..85d9b95234
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt
@@ -0,0 +1,68 @@
+* AppliedMicro X-Gene v1 PCIe MSI controller
+
+Required properties:
+
+- compatible: should be "apm,xgene1-msi" to identify
+ X-Gene v1 PCIe MSI controller block.
+- msi-controller: indicates that this is an X-Gene v1 PCIe MSI controller node
+- reg: physical base address (0x79000000) and length (0x900000) for controller
+ registers. These registers include the MSI termination address and data
+ registers as well as the MSI interrupt status registers.
+- reg-names: not required
+- interrupts: A list of 16 interrupt outputs of the controller, starting from
+ interrupt number 0x10 to 0x1f.
+- interrupt-names: not required
+
+Each PCIe node needs to have property msi-parent that points to an MSI
+controller node
+
+Examples:
+
+SoC DTSI:
+
+ + MSI node:
+ msi@79000000 {
+ compatible = "apm,xgene1-msi";
+ msi-controller;
+ reg = <0x00 0x79000000 0x0 0x900000>;
+ interrupts = <0x0 0x10 0x4>
+ <0x0 0x11 0x4>
+ <0x0 0x12 0x4>
+ <0x0 0x13 0x4>
+ <0x0 0x14 0x4>
+ <0x0 0x15 0x4>
+ <0x0 0x16 0x4>
+ <0x0 0x17 0x4>
+ <0x0 0x18 0x4>
+ <0x0 0x19 0x4>
+ <0x0 0x1a 0x4>
+ <0x0 0x1b 0x4>
+ <0x0 0x1c 0x4>
+ <0x0 0x1d 0x4>
+ <0x0 0x1e 0x4>
+ <0x0 0x1f 0x4>;
+ };
+
+ + PCIe controller node with msi-parent property pointing to MSI node:
+ pcie0: pcie@1f2b0000 {
+ device_type = "pci";
+ compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */
+ 0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+ reg-names = "csr", "cfg";
+ ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000 /* io */
+ 0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */
+ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+ 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1
+ 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1
+ 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1
+ 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>;
+ dma-coherent;
+ clocks = <&pcie0clk 0>;
+ msi-parent= <&msi>;
+ };
diff --git a/Documentation/devicetree/bindings/pci/xgene-pci.txt b/Documentation/devicetree/bindings/pci/xgene-pci.txt
new file mode 100644
index 0000000000..92490330dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/xgene-pci.txt
@@ -0,0 +1,50 @@
+* AppliedMicro X-Gene PCIe interface
+
+Required properties:
+- device_type: set to "pci"
+- compatible: should contain "apm,xgene-pcie" to identify the core.
+- reg: A list of physical base address and length for each set of controller
+ registers. Must contain an entry for each entry in the reg-names
+ property.
+- reg-names: Must include the following entries:
+ "csr": controller configuration registers.
+ "cfg": PCIe configuration space registers.
+- #address-cells: set to <3>
+- #size-cells: set to <2>
+- ranges: ranges for the outbound memory, I/O regions.
+- dma-ranges: ranges for the inbound memory regions.
+- #interrupt-cells: set to <1>
+- interrupt-map-mask and interrupt-map: standard PCI properties
+ to define the mapping of the PCIe interface to interrupt
+ numbers.
+- clocks: from common clock binding: handle to pci clock.
+
+Optional properties:
+- status: Either "ok" or "disabled".
+- dma-coherent: Present if DMA operations are coherent
+
+Example:
+
+ pcie0: pcie@1f2b0000 {
+ status = "disabled";
+ device_type = "pci";
+ compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */
+ 0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+ reg-names = "csr", "cfg";
+ ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000 /* io */
+ 0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */
+ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+ 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1
+ 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1
+ 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1
+ 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>;
+ dma-coherent;
+ clocks = <&pcie0clk 0>;
+ };
+
diff --git a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
new file mode 100644
index 0000000000..4734be456b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/xilinx-versal-cpm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CPM Host Controller device tree for Xilinx Versal SoCs
+
+maintainers:
+ - Bharat Kumar Gogada <bharat.kumar.gogada@amd.com>
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+ compatible:
+ enum:
+ - xlnx,versal-cpm-host-1.00
+ - xlnx,versal-cpm5-host
+
+ reg:
+ items:
+ - description: CPM system level control and status registers.
+ - description: Configuration space region and bridge registers.
+ - description: CPM5 control and status registers.
+ minItems: 2
+
+ reg-names:
+ items:
+ - const: cpm_slcr
+ - const: cfg
+ - const: cpm_csr
+ minItems: 2
+
+ interrupts:
+ maxItems: 1
+
+ msi-map:
+ description:
+ Maps a Requester ID to an MSI controller and associated MSI sideband data.
+
+ ranges:
+ maxItems: 2
+
+ "#interrupt-cells":
+ const: 1
+
+ interrupt-controller:
+ description: Interrupt controller node for handling legacy PCI interrupts.
+ type: object
+ properties:
+ "#address-cells":
+ const: 0
+ "#interrupt-cells":
+ const: 1
+ "interrupt-controller": true
+ additionalProperties: false
+
+required:
+ - reg
+ - reg-names
+ - "#interrupt-cells"
+ - interrupts
+ - interrupt-map
+ - interrupt-map-mask
+ - bus-range
+ - msi-map
+ - interrupt-controller
+
+unevaluatedProperties: false
+
+examples:
+ - |
+
+ versal {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ cpm_pcie: pcie@fca10000 {
+ compatible = "xlnx,versal-cpm-host-1.00";
+ device_type = "pci";
+ #address-cells = <3>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ interrupts = <0 72 4>;
+ interrupt-parent = <&gic>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc_0 0>,
+ <0 0 0 2 &pcie_intc_0 1>,
+ <0 0 0 3 &pcie_intc_0 2>,
+ <0 0 0 4 &pcie_intc_0 3>;
+ bus-range = <0x00 0xff>;
+ ranges = <0x02000000 0x0 0xe0000000 0x0 0xe0000000 0x0 0x10000000>,
+ <0x43000000 0x80 0x00000000 0x80 0x00000000 0x0 0x80000000>;
+ msi-map = <0x0 &its_gic 0x0 0x10000>;
+ reg = <0x0 0xfca10000 0x0 0x1000>,
+ <0x6 0x00000000 0x0 0x10000000>;
+ reg-names = "cpm_slcr", "cfg";
+ pcie_intc_0: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+
+ cpm5_pcie: pcie@fcdd0000 {
+ compatible = "xlnx,versal-cpm5-host";
+ device_type = "pci";
+ #address-cells = <3>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ interrupts = <0 72 4>;
+ interrupt-parent = <&gic>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc_1 0>,
+ <0 0 0 2 &pcie_intc_1 1>,
+ <0 0 0 3 &pcie_intc_1 2>,
+ <0 0 0 4 &pcie_intc_1 3>;
+ bus-range = <0x00 0xff>;
+ ranges = <0x02000000 0x0 0xe0000000 0x0 0xe0000000 0x0 0x10000000>,
+ <0x43000000 0x80 0x00000000 0x80 0x00000000 0x0 0x80000000>;
+ msi-map = <0x0 &its_gic 0x0 0x10000>;
+ reg = <0x00 0xfcdd0000 0x00 0x1000>,
+ <0x06 0x00000000 0x00 0x1000000>,
+ <0x00 0xfce20000 0x00 0x1000000>;
+ reg-names = "cpm_slcr", "cfg", "cpm_csr";
+
+ pcie_intc_1: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+
+ };
diff --git a/Documentation/devicetree/bindings/pci/xlnx,axi-pcie-host.yaml b/Documentation/devicetree/bindings/pci/xlnx,axi-pcie-host.yaml
new file mode 100644
index 0000000000..69b7decabd
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/xlnx,axi-pcie-host.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/xlnx,axi-pcie-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx AXI PCIe Root Port Bridge
+
+maintainers:
+ - Thippeswamy Havalige <thippeswamy.havalige@amd.com>
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+ compatible:
+ const: xlnx,axi-pcie-host-1.00.a
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ ranges:
+ items:
+ - description: |
+ ranges for the PCI memory regions (I/O space region is not
+ supported by hardware)
+
+ "#interrupt-cells":
+ const: 1
+
+ interrupt-controller:
+ description: identifies the node as an interrupt controller
+ type: object
+ properties:
+ interrupt-controller: true
+
+ "#address-cells":
+ const: 0
+
+ "#interrupt-cells":
+ const: 1
+
+ required:
+ - interrupt-controller
+ - "#address-cells"
+ - "#interrupt-cells"
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - ranges
+ - interrupts
+ - interrupt-map
+ - "#interrupt-cells"
+ - interrupt-controller
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ pcie@50000000 {
+ compatible = "xlnx,axi-pcie-host-1.00.a";
+ reg = <0x50000000 0x1000000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc 1>,
+ <0 0 0 2 &pcie_intc 2>,
+ <0 0 0 3 &pcie_intc 3>,
+ <0 0 0 4 &pcie_intc 4>;
+ ranges = <0x02000000 0 0x60000000 0x60000000 0 0x10000000>;
+ pcie_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml b/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml
new file mode 100644
index 0000000000..897602559b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/xlnx,nwl-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx NWL PCIe Root Port Bridge
+
+maintainers:
+ - Thippeswamy Havalige <thippeswamy.havalige@amd.com>
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+ - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+
+properties:
+ compatible:
+ const: xlnx,nwl-pcie-2.11
+
+ reg:
+ items:
+ - description: PCIe bridge registers location.
+ - description: PCIe Controller registers location.
+ - description: PCIe Configuration space region.
+
+ reg-names:
+ items:
+ - const: breg
+ - const: pcireg
+ - const: cfg
+
+ interrupts:
+ items:
+ - description: interrupt asserted when miscellaneous interrupt is received
+ - description: unused interrupt(dummy)
+ - description: interrupt asserted when a legacy interrupt is received
+ - description: msi1 interrupt asserted when an MSI is received
+ - description: msi0 interrupt asserted when an MSI is received
+
+ interrupt-names:
+ items:
+ - const: misc
+ - const: dummy
+ - const: intx
+ - const: msi1
+ - const: msi0
+
+ interrupt-map-mask:
+ items:
+ - const: 0
+ - const: 0
+ - const: 0
+ - const: 7
+
+ "#interrupt-cells":
+ const: 1
+
+ msi-parent:
+ description: MSI controller the device is capable of using.
+
+ interrupt-map:
+ maxItems: 4
+
+ power-domains:
+ maxItems: 1
+
+ iommus:
+ maxItems: 1
+
+ dma-coherent:
+ description: optional, only needed if DMA operations are coherent.
+
+ clocks:
+ maxItems: 1
+ description: optional, input clock specifier.
+
+ legacy-interrupt-controller:
+ description: Interrupt controller node for handling legacy PCI interrupts.
+ type: object
+ properties:
+ "#address-cells":
+ const: 0
+
+ "#interrupt-cells":
+ const: 1
+
+ "interrupt-controller": true
+
+ required:
+ - "#address-cells"
+ - "#interrupt-cells"
+ - interrupt-controller
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - "#interrupt-cells"
+ - interrupt-map
+ - interrupt-map-mask
+ - msi-controller
+ - power-domains
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/power/xlnx-zynqmp-power.h>
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ nwl_pcie: pcie@fd0e0000 {
+ compatible = "xlnx,nwl-pcie-2.11";
+ reg = <0x0 0xfd0e0000 0x0 0x1000>,
+ <0x0 0xfd480000 0x0 0x1000>,
+ <0x80 0x00000000 0x0 0x1000000>;
+ reg-names = "breg", "pcireg", "cfg";
+ ranges = <0x02000000 0x0 0xe0000000 0x0 0xe0000000 0x0 0x10000000>,
+ <0x43000000 0x00000006 0x0 0x00000006 0x0 0x00000002 0x0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ msi-controller;
+ device_type = "pci";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 116 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 115 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "misc", "dummy", "intx", "msi1", "msi0";
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
+ <0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
+ <0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
+ <0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
+ msi-parent = <&nwl_pcie>;
+ power-domains = <&zynqmp_firmware PD_PCIE>;
+ iommus = <&smmu 0x4d0>;
+ pcie_intc: legacy-interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+ };