diff options
Diffstat (limited to 'Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml')
-rw-r--r-- | Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml | 79 |
1 files changed, 79 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml b/Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml new file mode 100644 index 0000000000..2127a5732f --- /dev/null +++ b/Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2023 MediaTek, BayLibre +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/mediatek,mt8365-csi-rx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek Sensor Interface MIPI CSI CD-PHY + +maintainers: + - Julien Stephan <jstephan@baylibre.com> + - Andy Hsieh <andy.hsieh@mediatek.com> + +description: + The SENINF CD-PHY is a set of CD-PHY connected to the SENINF CSI-2 + receivers. The number of PHYs depends on the SoC model. + Depending on the SoC model, each PHYs can be either CD-PHY or D-PHY only + capable. + +properties: + compatible: + enum: + - mediatek,mt8365-csi-rx + + reg: + maxItems: 1 + + num-lanes: + enum: [2, 3, 4] + + '#phy-cells': + enum: [0, 1] + description: | + If the PHY doesn't support mode selection then #phy-cells must be 0 and + PHY mode is described using phy-type property. + If the PHY supports mode selection, then #phy-cells must be 1 and mode + is set in the PHY cells. Supported modes are: + - PHY_TYPE_DPHY + - PHY_TYPE_CPHY + See include/dt-bindings/phy/phy.h for constants. + + phy-type: + description: + If the PHY doesn't support mode selection then this set the operating mode. + See include/dt-bindings/phy/phy.h for constants. + const: 10 + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - num-lanes + - '#phy-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/phy/phy.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + + csi0_rx: phy@11c10000 { + compatible = "mediatek,mt8365-csi-rx"; + reg = <0 0x11c10000 0 0x2000>; + num-lanes = <2>; + #phy-cells = <1>; + }; + + csi1_rx: phy@11c12000 { + compatible = "mediatek,mt8365-csi-rx"; + reg = <0 0x11c12000 0 0x2000>; + phy-type = <PHY_TYPE_DPHY>; + num-lanes = <2>; + #phy-cells = <0>; + }; + }; +... |