summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml')
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml49
1 files changed, 4 insertions, 45 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
index 4b4be7efc1..750c996c10 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
@@ -30,16 +30,6 @@ properties:
- const: core
- const: audio
- gpio-controller: true
-
- "#gpio-cells":
- description: Specifying the pin number and flags, as defined in
- include/dt-bindings/gpio/gpio.h
- const: 2
-
- gpio-ranges:
- maxItems: 1
-
patternProperties:
"-state$":
oneOf:
@@ -55,7 +45,8 @@ $defs:
description:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
- $ref: /schemas/pinctrl/pincfg-node.yaml
+ $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
properties:
pins:
@@ -78,48 +69,16 @@ $defs:
Specify the alternative function to be configured for the specified
pins.
- drive-strength:
- enum: [2, 4, 6, 8, 10, 12, 14, 16]
- default: 2
- description:
- Selects the drive strength for the specified pins, in mA.
-
- slew-rate:
- enum: [0, 1, 2, 3]
- default: 0
- description: |
- 0: No adjustments
- 1: Higher Slew rate (faster edges)
- 2: Lower Slew rate (slower edges)
- 3: Reserved (No adjustments)
-
- bias-pull-down: true
- bias-pull-up: true
- bias-bus-hold: true
- bias-disable: true
- input-enable: true
- output-high: true
- output-low: true
-
- required:
- - pins
- - function
-
- additionalProperties: false
-
allOf:
- - $ref: pinctrl.yaml#
+ - $ref: qcom,lpass-lpi-common.yaml#
required:
- compatible
- reg
- clocks
- clock-names
- - gpio-controller
- - "#gpio-cells"
- - gpio-ranges
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |