diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml')
-rw-r--r-- | Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml | 49 |
1 files changed, 4 insertions, 45 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml index 1eefa9aa6a..e7565592da 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml @@ -32,16 +32,6 @@ properties: - const: core - const: audio - gpio-controller: true - - "#gpio-cells": - description: Specifying the pin number and flags, as defined in - include/dt-bindings/gpio/gpio.h - const: 2 - - gpio-ranges: - maxItems: 1 - patternProperties: "-state$": oneOf: @@ -57,7 +47,8 @@ $defs: description: Pinctrl node's client devices use subnodes for desired pin configuration. Client device subnodes use below standard properties. - $ref: /schemas/pinctrl/pincfg-node.yaml + $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false properties: pins: @@ -81,48 +72,16 @@ $defs: Specify the alternative function to be configured for the specified pins. - drive-strength: - enum: [2, 4, 6, 8, 10, 12, 14, 16] - default: 2 - description: - Selects the drive strength for the specified pins, in mA. - - slew-rate: - enum: [0, 1, 2, 3] - default: 0 - description: | - 0: No adjustments - 1: Higher Slew rate (faster edges) - 2: Lower Slew rate (slower edges) - 3: Reserved (No adjustments) - - bias-bus-hold: true - bias-pull-down: true - bias-pull-up: true - bias-disable: true - input-enable: true - output-high: true - output-low: true - - required: - - pins - - function - - additionalProperties: false - allOf: - - $ref: pinctrl.yaml# + - $ref: qcom,lpass-lpi-common.yaml# required: - compatible - reg - clocks - clock-names - - gpio-controller - - "#gpio-cells" - - gpio-ranges -additionalProperties: false +unevaluatedProperties: false examples: - | |