summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/pinctrl
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl')
-rw-r--r--Documentation/devicetree/bindings/pinctrl/abilis,tb10x-iomux.txt80
-rw-r--r--Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml242
-rw-r--r--Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.txt170
-rw-r--r--Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt204
-rw-r--r--Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml302
-rw-r--r--Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml72
-rw-r--r--Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml64
-rw-r--r--Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml71
-rw-r--r--Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml75
-rw-r--r--Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml80
-rw-r--r--Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml82
-rw-r--r--Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml125
-rw-r--r--Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml86
-rw-r--r--Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml103
-rw-r--r--Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml117
-rw-r--r--Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt176
-rw-r--r--Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt98
-rw-r--r--Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt87
-rw-r--r--Documentation/devicetree/bindings/pinctrl/berlin,pinctrl.txt47
-rw-r--r--Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.txt126
-rw-r--r--Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.yaml259
-rw-r--r--Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt99
-rw-r--r--Documentation/devicetree/bindings/pinctrl/brcm,bcm4908-pinctrl.yaml73
-rw-r--r--Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml146
-rw-r--r--Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml167
-rw-r--r--Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml130
-rw-r--r--Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml96
-rw-r--r--Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml209
-rw-r--r--Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml220
-rw-r--r--Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinmux.txt132
-rw-r--r--Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt123
-rw-r--r--Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml90
-rw-r--r--Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt102
-rw-r--r--Documentation/devicetree/bindings/pinctrl/brcm,nsp-gpio.txt80
-rw-r--r--Documentation/devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt79
-rw-r--r--Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml180
-rw-r--r--Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml186
-rw-r--r--Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml113
-rw-r--r--Documentation/devicetree/bindings/pinctrl/cnxt,cx92755-pinctrl.txt86
-rw-r--r--Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt68
-rw-r--r--Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml138
-rw-r--r--Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt93
-rw-r--r--Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt23
-rw-r--r--Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt121
-rw-r--r--Documentation/devicetree/bindings/pinctrl/fsl,imx35-pinctrl.txt33
-rw-r--r--Documentation/devicetree/bindings/pinctrl/fsl,imx50-pinctrl.txt32
-rw-r--r--Documentation/devicetree/bindings/pinctrl/fsl,imx51-pinctrl.txt32
-rw-r--r--Documentation/devicetree/bindings/pinctrl/fsl,imx53-pinctrl.txt32
-rw-r--r--Documentation/devicetree/bindings/pinctrl/fsl,imx6dl-pinctrl.txt38
-rw-r--r--Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt38
-rw-r--r--Documentation/devicetree/bindings/pinctrl/fsl,imx6sl-pinctrl.txt39
-rw-r--r--Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt40
-rw-r--r--Documentation/devicetree/bindings/pinctrl/fsl,imx6sx-pinctrl.txt36
-rw-r--r--Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt37
-rw-r--r--Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml113
-rw-r--r--Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-pinctrl.txt53
-rw-r--r--Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml90
-rw-r--r--Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml82
-rw-r--r--Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml85
-rw-r--r--Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.yaml79
-rw-r--r--Documentation/devicetree/bindings/pinctrl/fsl,imxrt1170.yaml77
-rw-r--r--Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt127
-rw-r--r--Documentation/devicetree/bindings/pinctrl/fsl,scu-pinctrl.yaml74
-rw-r--r--Documentation/devicetree/bindings/pinctrl/fsl,vf610-pinctrl.txt41
-rw-r--r--Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt217
-rw-r--r--Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml189
-rw-r--r--Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml76
-rw-r--r--Documentation/devicetree/bindings/pinctrl/intel,pinctrl-keembay.yaml136
-rw-r--r--Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-falcon.txt83
-rw-r--r--Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt158
-rw-r--r--Documentation/devicetree/bindings/pinctrl/loongson,ls2k-pinctrl.yaml123
-rw-r--r--Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml73
-rw-r--r--Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt99
-rw-r--r--Documentation/devicetree/bindings/pinctrl/marvell,armada-375-pinctrl.txt82
-rw-r--r--Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt195
-rw-r--r--Documentation/devicetree/bindings/pinctrl/marvell,armada-38x-pinctrl.txt80
-rw-r--r--Documentation/devicetree/bindings/pinctrl/marvell,armada-39x-pinctrl.txt84
-rw-r--r--Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt46
-rw-r--r--Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt99
-rw-r--r--Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt90
-rw-r--r--Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt359
-rw-r--r--Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt46
-rw-r--r--Documentation/devicetree/bindings/pinctrl/marvell,orion-pinctrl.txt93
-rw-r--r--Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml210
-rw-r--r--Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml253
-rw-r--r--Documentation/devicetree/bindings/pinctrl/mediatek,mt6795-pinctrl.yaml228
-rw-r--r--Documentation/devicetree/bindings/pinctrl/mediatek,mt7620-pinctrl.yaml298
-rw-r--r--Documentation/devicetree/bindings/pinctrl/mediatek,mt7621-pinctrl.yaml261
-rw-r--r--Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml376
-rw-r--r--Documentation/devicetree/bindings/pinctrl/mediatek,mt76x8-pinctrl.yaml450
-rw-r--r--Documentation/devicetree/bindings/pinctrl/mediatek,mt7981-pinctrl.yaml480
-rw-r--r--Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml462
-rw-r--r--Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml237
-rw-r--r--Documentation/devicetree/bindings/pinctrl/mediatek,mt8186-pinctrl.yaml275
-rw-r--r--Documentation/devicetree/bindings/pinctrl/mediatek,mt8188-pinctrl.yaml232
-rw-r--r--Documentation/devicetree/bindings/pinctrl/mediatek,mt8192-pinctrl.yaml184
-rw-r--r--Documentation/devicetree/bindings/pinctrl/mediatek,mt8195-pinctrl.yaml286
-rw-r--r--Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml230
-rw-r--r--Documentation/devicetree/bindings/pinctrl/microchip,pic32-pinctrl.txt60
-rw-r--r--Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml168
-rw-r--r--Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml116
-rw-r--r--Documentation/devicetree/bindings/pinctrl/nuvoton,npcm7xx-pinctrl.txt216
-rw-r--r--Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml161
-rw-r--r--Documentation/devicetree/bindings/pinctrl/nvidia,tegra-pinmux-common.yaml178
-rw-r--r--Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.yaml153
-rw-r--r--Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.yaml174
-rw-r--r--Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt135
-rw-r--r--Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.yaml282
-rw-r--r--Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.yaml110
-rw-r--r--Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml140
-rw-r--r--Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml78
-rw-r--r--Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml66
-rw-r--r--Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml139
-rw-r--r--Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.yaml174
-rw-r--r--Documentation/devicetree/bindings/pinctrl/nxp,lpc1850-scu.txt71
-rw-r--r--Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml123
-rw-r--r--Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml153
-rw-r--r--Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt109
-rw-r--r--Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt127
-rw-r--r--Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt148
-rw-r--r--Documentation/devicetree/bindings/pinctrl/pinctrl-palmas.txt105
-rw-r--r--Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt63
-rw-r--r--Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml207
-rw-r--r--Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt47
-rw-r--r--Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt174
-rw-r--r--Documentation/devicetree/bindings/pinctrl/pinctrl-vt8500.txt57
-rw-r--r--Documentation/devicetree/bindings/pinctrl/pinctrl.yaml45
-rw-r--r--Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt155
-rw-r--r--Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml133
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt95
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt188
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt85
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml127
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml125
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml124
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt101
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml128
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml121
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml124
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml112
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml107
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml117
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml144
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml159
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml141
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml157
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml172
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml129
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml155
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml175
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml164
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml572
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml191
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml129
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml169
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml125
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml129
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml151
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml134
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml152
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml144
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml155
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml143
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml181
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml119
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml162
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml128
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml159
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml137
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml135
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml144
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml143
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml156
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml148
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml153
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml166
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml161
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml127
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml143
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml143
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml164
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml142
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml150
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml154
-rw-r--r--Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml101
-rw-r--r--Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml141
-rw-r--r--Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml206
-rw-r--r--Documentation/devicetree/bindings/pinctrl/ralink,rt3352-pinctrl.yaml243
-rw-r--r--Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml261
-rw-r--r--Documentation/devicetree/bindings/pinctrl/ralink,rt5350-pinctrl.yaml206
-rw-r--r--Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml194
-rw-r--r--Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml190
-rw-r--r--Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml98
-rw-r--r--Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml180
-rw-r--r--Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-poeg.yaml86
-rw-r--r--Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml128
-rw-r--r--Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml166
-rw-r--r--Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml188
-rw-r--r--Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml52
-rw-r--r--Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml80
-rw-r--r--Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml106
-rw-r--r--Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml387
-rw-r--r--Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml208
-rw-r--r--Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml84
-rw-r--r--Documentation/devicetree/bindings/pinctrl/sprd,pinctrl.txt83
-rw-r--r--Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.txt70
-rw-r--r--Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml288
-rw-r--r--Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml307
-rw-r--r--Documentation/devicetree/bindings/pinctrl/starfive,jh7110-aon-pinctrl.yaml124
-rw-r--r--Documentation/devicetree/bindings/pinctrl/starfive,jh7110-sys-pinctrl.yaml142
-rw-r--r--Documentation/devicetree/bindings/pinctrl/ste,abx500.txt318
-rw-r--r--Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt148
-rw-r--r--Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml377
-rw-r--r--Documentation/devicetree/bindings/pinctrl/ti,da850-pupd.txt55
-rw-r--r--Documentation/devicetree/bindings/pinctrl/ti,iodelay.txt47
-rw-r--r--Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml96
-rw-r--r--Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml217
-rw-r--r--Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml342
218 files changed, 31633 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/abilis,tb10x-iomux.txt b/Documentation/devicetree/bindings/pinctrl/abilis,tb10x-iomux.txt
new file mode 100644
index 0000000000..c591b9cb5b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/abilis,tb10x-iomux.txt
@@ -0,0 +1,80 @@
+Abilis Systems TB10x pin controller
+===================================
+
+Required properties
+-------------------
+
+- compatible: should be "abilis,tb10x-iomux";
+- reg: should contain the physical address and size of the pin controller's
+ register range.
+
+
+Function definitions
+--------------------
+
+Functions are defined (and referenced) by sub-nodes of the pin controller.
+Every sub-node defines exactly one function (implying a set of pins).
+Every function is associated to one named pin group inside the pin controller
+driver and these names are used to associate pin group predefinitions to pin
+controller sub-nodes.
+
+Required function definition subnode properties:
+ - abilis,function: should be set to the name of the function's pin group.
+
+The following pin groups are available:
+ - GPIO ports: gpioa, gpiob, gpioc, gpiod, gpioe, gpiof, gpiog,
+ gpioh, gpioi, gpioj, gpiok, gpiol, gpiom, gpion
+ - Serial TS input ports: mis0, mis1, mis2, mis3, mis4, mis5, mis6, mis7
+ - Parallel TS input ports: mip1, mip3, mip5, mip7
+ - Serial TS output ports: mos0, mos1, mos2, mos3
+ - Parallel TS output port: mop
+ - CI+ port: ciplus
+ - CableCard (Mcard) port: mcard
+ - Smart card ports: stc0, stc1
+ - UART ports: uart0, uart1
+ - SPI ports: spi1, spi3
+ - JTAG: jtag
+
+All other ports of the chip are not multiplexed and thus not managed by this
+driver.
+
+
+GPIO ranges definition
+----------------------
+
+The named pin groups of GPIO ports can be used to define GPIO ranges as
+explained in Documentation/devicetree/bindings/gpio/gpio.txt.
+
+
+Example
+-------
+
+iomux: iomux@ff10601c {
+ compatible = "abilis,tb10x-iomux";
+ reg = <0xFF10601c 0x4>;
+ pctl_gpio_a: pctl-gpio-a {
+ abilis,function = "gpioa";
+ };
+ pctl_uart0: pctl-uart0 {
+ abilis,function = "uart0";
+ };
+};
+uart@ff100000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xFF100000 0x100>;
+ clock-frequency = <166666666>;
+ interrupts = <25 1>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pctl_uart0>;
+};
+gpioa: gpio@ff140000 {
+ compatible = "abilis,tb10x-gpio";
+ reg = <0xFF140000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpio = <3>;
+ gpio-ranges = <&iomux 0 0>;
+ gpio-ranges-group-names = "gpioa";
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
new file mode 100644
index 0000000000..7cb8a747fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
@@ -0,0 +1,242 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/actions,s500-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Actions Semi S500 SoC pinmux & GPIO controller
+
+maintainers:
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ - Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
+
+description: |
+ Pinmux & GPIO controller manages pin multiplexing & configuration including
+ GPIO function selection & GPIO attributes configuration. Please refer to
+ pinctrl-bindings.txt in this directory for common binding part and usage.
+
+properties:
+ compatible:
+ const: actions,s500-pinctrl
+
+ reg:
+ items:
+ - description: GPIO Output + GPIO Input + GPIO Data
+ - description: Multiplexing Control
+ - description: PAD Pull Control + PAD Schmitt Trigger Enable + PAD Control
+ - description: PAD Drive Capacity Select
+ minItems: 1
+
+ clocks:
+ maxItems: 1
+
+ gpio-controller: true
+
+ gpio-ranges:
+ maxItems: 1
+
+ '#gpio-cells':
+ description:
+ Specifies the pin number and flags, as defined in
+ include/dt-bindings/gpio/gpio.h
+ const: 2
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ description:
+ Specifies the pin number and flags, as defined in
+ include/dt-bindings/interrupt-controller/irq.h
+ const: 2
+
+ interrupts:
+ description:
+ One interrupt per each of the 5 GPIO ports supported by the controller,
+ sorted by port number ascending order.
+ minItems: 5
+ maxItems: 5
+
+patternProperties:
+ '-pins$':
+ type: object
+ patternProperties:
+ '^(.*-)?pinmux$':
+ type: object
+ description:
+ Pinctrl node's client devices specify pin muxes using subnodes,
+ which in turn use the standard properties below.
+ $ref: pinmux-node.yaml#
+
+ properties:
+ groups:
+ description:
+ List of gpio pin groups affected by the functions specified in
+ this subnode.
+ items:
+ oneOf:
+ - enum: [lcd0_d18_mfp, rmii_crs_dv_mfp, rmii_txd0_mfp,
+ rmii_txd1_mfp, rmii_txen_mfp, rmii_rxen_mfp, rmii_rxd1_mfp,
+ rmii_rxd0_mfp, rmii_ref_clk_mfp, i2s_d0_mfp, i2s_pcm1_mfp,
+ i2s0_pcm0_mfp, i2s1_pcm0_mfp, i2s_d1_mfp, ks_in2_mfp,
+ ks_in1_mfp, ks_in0_mfp, ks_in3_mfp, ks_out0_mfp,
+ ks_out1_mfp, ks_out2_mfp, lvds_o_pn_mfp, dsi_dn0_mfp,
+ dsi_dp2_mfp, lcd0_d17_mfp, dsi_dp3_mfp, dsi_dn3_mfp,
+ dsi_dp0_mfp, lvds_ee_pn_mfp, spi0_i2c_pcm_mfp,
+ spi0_i2s_pcm_mfp, dsi_dnp1_cp_mfp, lvds_e_pn_mfp,
+ dsi_dn2_mfp, uart2_rtsb_mfp, uart2_ctsb_mfp, uart3_rtsb_mfp,
+ uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp, sd0_d2_d3_mfp,
+ sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp,
+ uart0_rx_mfp, clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp,
+ uart0_tx_mfp, i2c0_mfp, csi_dn_dp_mfp, sen0_pclk_mfp,
+ pcm1_in_mfp, pcm1_clk_mfp, pcm1_sync_mfp, pcm1_out_mfp,
+ dnand_data_wr_mfp, dnand_acle_ce0_mfp, nand_ceb2_mfp,
+ nand_ceb3_mfp]
+ minItems: 1
+ maxItems: 32
+
+ function:
+ description:
+ Specify the alternative function to be configured for the
+ given gpio pin groups.
+ enum: [nor, eth_rmii, eth_smii, spi0, spi1, spi2, spi3, sens0,
+ sens1, uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0,
+ i2s1, pcm1, pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5,
+ p0, sd0, sd1, sd2, i2c0, i2c1, i2c3, dsi, lvds, usb30, clko_25m,
+ mipi_csi, nand, spdif, ts, lcd0]
+
+ required:
+ - groups
+ - function
+
+ additionalProperties: false
+
+ '^(.*-)?pinconf$':
+ type: object
+ description:
+ Pinctrl node's client devices specify pin configurations using
+ subnodes, which in turn use the standard properties below.
+ $ref: pincfg-node.yaml#
+
+ properties:
+ groups:
+ description:
+ List of gpio pin groups affected by the drive-strength property
+ specified in this subnode.
+ items:
+ oneOf:
+ - enum: [sirq_drv, rmii_txd01_txen_drv, rmii_rxer_drv,
+ rmii_crs_drv, rmii_rxd10_drv, rmii_ref_clk_drv,
+ smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv, i2s3_drv,
+ i2s13_drv, pcm1_drv, ks_in_drv, ks_out_drv, lvds_all_drv,
+ lcd_dsi_drv, dsi_drv, sd0_d0_d3_drv, sd1_d0_d3_drv,
+ sd0_cmd_drv, sd0_clk_drv, sd1_cmd_drv, sd1_clk_drv,
+ spi0_all_drv, uart0_rx_drv, uart0_tx_drv, uart2_all_drv,
+ i2c0_all_drv, i2c12_all_drv, sens0_pclk_drv,
+ sens0_ckout_drv, uart3_all_drv]
+ minItems: 1
+ maxItems: 32
+
+ pins:
+ description:
+ List of gpio pins affected by the bias-pull-* and
+ input-schmitt-* properties specified in this subnode.
+ items:
+ oneOf:
+ - enum: [dnand_dqs, dnand_dqsn, eth_txd0, eth_txd1, eth_txen,
+ eth_rxer, eth_crs_dv, eth_rxd1, eth_rxd0, eth_ref_clk,
+ eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0,
+ i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1,
+ i2s_mclk1, ks_in0, ks_in1, ks_in2, ks_in3, ks_out0, ks_out1,
+ ks_out2, lvds_oep, lvds_oen, lvds_odp, lvds_odn, lvds_ocp,
+ lvds_ocn, lvds_obp, lvds_obn, lvds_oap, lvds_oan, lvds_eep,
+ lvds_een, lvds_edp, lvds_edn, lvds_ecp, lvds_ecn, lvds_ebp,
+ lvds_ebn, lvds_eap, lvds_ean, lcd0_d18, lcd0_d17, dsi_dp3,
+ dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, dsi_cn, dsi_dp0, dsi_dn0,
+ dsi_dp2, dsi_dn2, sd0_d0, sd0_d1, sd0_d2, sd0_d3, sd1_d0,
+ sd1_d1, sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd, sd1_clk,
+ spi0_sclk, spi0_ss, spi0_miso, spi0_mosi, uart0_rx,
+ uart0_tx, i2c0_sclk, i2c0_sdata, sensor0_pclk,
+ sensor0_ckout, dnand_ale, dnand_cle, dnand_ceb0, dnand_ceb1,
+ dnand_ceb2, dnand_ceb3, uart2_rx, uart2_tx, uart2_rtsb,
+ uart2_ctsb, uart3_rx, uart3_tx, uart3_rtsb, uart3_ctsb,
+ pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, i2c1_sclk,
+ i2c1_sdata, i2c2_sclk, i2c2_sdata, csi_dn0, csi_dp0,
+ csi_dn1, csi_dp1, csi_dn2, csi_dp2, csi_dn3, csi_dp3,
+ csi_cn, csi_cp, dnand_d0, dnand_d1, dnand_d2, dnand_d3,
+ dnand_d4, dnand_d5, dnand_d6, dnand_d7, dnand_rb, dnand_rdb,
+ dnand_rdbn, dnand_wrb, porb, clko_25m, bsel, pkg0, pkg1,
+ pkg2, pkg3]
+ minItems: 1
+ maxItems: 64
+
+ bias-pull-up: true
+ bias-pull-down: true
+
+ drive-strength:
+ description:
+ Selects the drive strength for the specified pins, in mA.
+ enum: [2, 4, 8, 12]
+
+ input-schmitt-enable: true
+ input-schmitt-disable: true
+
+ additionalProperties: false
+
+ additionalProperties: false
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - gpio-controller
+ - gpio-ranges
+ - '#gpio-cells'
+ - interrupt-controller
+ - '#interrupt-cells'
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ pinctrl: pinctrl@b01b0000 {
+ compatible = "actions,s500-pinctrl";
+ reg = <0xb01b0000 0x40>, <0xb01b0040 0x10>,
+ <0xb01b0060 0x18>, <0xb01b0080 0xc>;
+ clocks = <&cmu 55>;
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 132>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+
+ mmc0_pins: mmc0-pins {
+ pinmux {
+ groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp",
+ "sd0_cmd_mfp", "sd0_clk_mfp";
+ function = "sd0";
+ };
+
+ drv-pinconf {
+ groups = "sd0_d0_d3_drv", "sd0_cmd_drv", "sd0_clk_drv";
+ drive-strength = <8>;
+ };
+
+ bias-pinconf {
+ pins = "sd0_d0", "sd0_d1", "sd0_d2",
+ "sd0_d3", "sd0_cmd";
+ bias-pull-up;
+ };
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.txt
new file mode 100644
index 0000000000..d13ff82f85
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.txt
@@ -0,0 +1,170 @@
+Actions Semi S700 Pin Controller
+
+This binding describes the pin controller found in the S700 SoC.
+
+Required Properties:
+
+- compatible: Should be "actions,s700-pinctrl"
+- reg: Should contain the register base address and size of
+ the pin controller.
+- clocks: phandle of the clock feeding the pin controller
+- gpio-controller: Marks the device node as a GPIO controller.
+- gpio-ranges: Specifies the mapping between gpio controller and
+ pin-controller pins.
+- #gpio-cells: Should be two. The first cell is the gpio pin number
+ and the second cell is used for optional parameters.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Specifies the number of cells needed to encode an
+ interrupt. Shall be set to 2. The first cell
+ defines the interrupt number, the second encodes
+ the trigger flags described in
+ bindings/interrupt-controller/interrupts.txt
+- interrupts: The interrupt outputs from the controller. There is one GPIO
+ interrupt per GPIO bank. The number of interrupts listed depends
+ on the number of GPIO banks on the SoC. The interrupts must be
+ ordered by bank, starting with bank 0.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+PIN CONFIGURATION NODES:
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+Pinmux functions are available only for the pin groups while pinconf
+parameters are available for both pin groups and individual pins.
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+Required Properties:
+
+- pins: An array of strings, each string containing the name of a pin.
+ These pins are used for selecting the pull control and schmitt
+ trigger parameters. The following are the list of pins
+ available:
+
+ eth_txd0, eth_txd1, eth_txd2, eth_txd3, eth_txen, eth_rxer,
+ eth_crs_dv, eth_rxd1, eth_rxd0, eth_rxd2, eth_rxd3, eth_ref_clk,
+ eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0,
+ i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1, i2s_mclk1,
+ pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, ks_in0, ks_in1, ks_in2,
+ ks_in3, ks_out0, ks_out1, ks_out2, lvds_oep, lvds_oen, lvds_odp,
+ lvds_odn, lvds_ocp, lvds_ocn, lvds_obp, lvds_obn, lvds_oap,
+ lvds_oan, lvds_eep, lvds_een, lvds_edp, lvds_edn, lvds_ecp,
+ lvds_ecn, lvds_ebp, lvds_ebn, lvds_eap, lvds_ean, lcd0_d18,
+ lcd0_d2, dsi_dp3, dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, dsi_cn,
+ dsi_dp0, dsi_dn0, dsi_dp2, dsi_dn2, sd0_d0, sd0_d1, sd0_d2,
+ sd0_d3, sd1_d0, sd1_d1, sd1_d2, sd1_d3, sd0_cmd, sd0_clk,
+ sd1_cmd, sd1_clk, spi0_ss, spi0_miso, uart0_rx, uart0_tx,
+ uart2_rx, uart2_tx, uart2_rtsb, uart2_ctsb, uart3_rx, uart3_tx,
+ uart3_rtsb, uart3_ctsb, i2c0_sclk, i2c0_sdata, i2c1_sclk,
+ i2c1_sdata, i2c2_sdata, csi_dn0, csi_dp0, csi_dn1, csi_dp1,
+ csi_cn, csi_cp, csi_dn2, csi_dp2, csi_dn3, csi_dp3,
+ sensor0_pclk, sensor0_ckout, dnand_d0, dnand_d1, dnand_d2,
+ dnand_d3, dnand_d4, dnand_d5, dnand_d6, dnand_d7, dnand_wrb,
+ dnand_rdb, dnand_rdbn, dnand_dqs, dnand_dqsn, dnand_rb0,
+ dnand_ale, dnand_cle, dnand_ceb0, dnand_ceb1, dnand_ceb2,
+ dnand_ceb3, porb, clko_25m, bsel, pkg0, pkg1, pkg2, pkg3
+
+- groups: An array of strings, each string containing the name of a pin
+ group. These pin groups are used for selecting the pinmux
+ functions.
+ rgmii_txd23_mfp, rgmii_rxd2_mfp, rgmii_rxd3_mfp, lcd0_d18_mfp,
+ rgmii_txd01_mfp, rgmii_txd0_mfp, rgmii_txd1_mfp, rgmii_txen_mfp,
+ rgmii_rxen_mfp, rgmii_rxd1_mfp, rgmii_rxd0_mfp, rgmii_ref_clk_mfp,
+ i2s_d0_mfp, i2s_pcm1_mfp, i2s0_pcm0_mfp, i2s1_pcm0_mfp,
+ i2s_d1_mfp, ks_in2_mfp, ks_in1_mfp, ks_in0_mfp, ks_in3_mfp,
+ ks_out0_mfp, ks_out1_mfp, ks_out2_mfp, lvds_o_pn_mfp, dsi_dn0_mfp,
+ dsi_dp2_mfp, lcd0_d2_mfp, dsi_dp3_mfp, dsi_dn3_mfp, dsi_dp0_mfp,
+ lvds_ee_pn_mfp, uart2_rx_tx_mfp, spi0_i2c_pcm_mfp, dsi_dnp1_cp_d2_mfp,
+ dsi_dnp1_cp_d17_mfp, lvds_e_pn_mfp, dsi_dn2_mfp, uart2_rtsb_mfp,
+ uart2_ctsb_mfp, uart3_rtsb_mfp, uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp,
+ sd0_d2_d3_mfp, sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp,
+ uart0_rx_mfp, clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp, uart0_tx_mfp,
+ i2c0_mfp, csi_dn_dp_mfp, sen0_pclk_mfp, pcm1_in_mfp, pcm1_clk_mfp,
+ pcm1_sync_mfp, pcm1_out_mfp, dnand_data_wr_mfp, dnand_acle_ce0_mfp,
+ nand_ceb2_mfp, nand_ceb3_mfp
+
+ These pin groups are used for selecting the drive strength
+ parameters.
+
+ sirq_drv, rgmii_txd23_drv, rgmii_rxd23_drv, rgmii_txd01_txen_drv,
+ rgmii_rxer_drv, rgmii_crs_drv, rgmii_rxd10_drv, rgmii_ref_clk_drv,
+ smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv, i2s3_drv, i2s13_drv,
+ pcm1_drv, ks_in_drv, ks_out_drv, lvds_all_drv, lcd_d18_d2_drv,
+ dsi_all_drv, sd0_d0_d3_drv, sd0_cmd_drv, sd0_clk_drv, spi0_all_drv,
+ uart0_rx_drv, uart0_tx_drv, uart2_all_drv, i2c0_all_drv, i2c12_all_drv,
+ sens0_pclk_drv, sens0_ckout_drv, uart3_all_drv
+
+- function: An array of strings, each string containing the name of the
+ pinmux functions. These functions can only be selected by
+ the corresponding pin groups. The following are the list of
+ pinmux functions available:
+
+ nor, eth_rgmii, eth_sgmii, spi0, spi1, spi2, spi3, seNs0, sens1,
+ uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0, i2s1,
+ pcm1, pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, p0,
+ sd0, sd1, sd2, i2c0, i2c1, i2c2, i2c3, dsi, lvds, usb30,
+ clko_25m, mipi_csi, nand, spdif, sirq0, sirq1, sirq2, bt, lcd0
+
+Optional Properties:
+
+- bias-pull-down: No arguments. The specified pins should be configured as
+ pull down.
+- bias-pull-up: No arguments. The specified pins should be configured as
+ pull up.
+- input-schmitt-enable: No arguments: Enable schmitt trigger for the specified
+ pins
+- input-schmitt-disable: No arguments: Disable schmitt trigger for the specified
+ pins
+- drive-strength: Integer. Selects the drive strength for the specified
+ pins in mA.
+ Valid values are:
+ <2>
+ <4>
+ <8>
+ <12>
+
+Example:
+
+ pinctrl: pinctrl@e01b0000 {
+ compatible = "actions,s700-pinctrl";
+ reg = <0x0 0xe01b0000 0x0 0x1000>;
+ clocks = <&cmu CLK_GPIO>;
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 136>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+
+ uart3-default: uart3-default {
+ pinmux {
+ groups = "uart3_rtsb_mfp", "uart3_ctsb_mfp";
+ function = "uart3";
+ };
+ pinconf {
+ groups = "uart3_all_drv";
+ drive-strength = <2>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt
new file mode 100644
index 0000000000..81b58dddd3
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt
@@ -0,0 +1,204 @@
+Actions Semi S900 Pin Controller
+
+This binding describes the pin controller found in the S900 SoC.
+
+Required Properties:
+
+- compatible: Should be "actions,s900-pinctrl"
+- reg: Should contain the register base address and size of
+ the pin controller.
+- clocks: phandle of the clock feeding the pin controller
+- gpio-controller: Marks the device node as a GPIO controller.
+- gpio-ranges: Specifies the mapping between gpio controller and
+ pin-controller pins.
+- #gpio-cells: Should be two. The first cell is the gpio pin number
+ and the second cell is used for optional parameters.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Specifies the number of cells needed to encode an
+ interrupt. Shall be set to 2. The first cell
+ defines the interrupt number, the second encodes
+ the trigger flags described in
+ bindings/interrupt-controller/interrupts.txt
+- interrupts: The interrupt outputs from the controller. There is one GPIO
+ interrupt per GPIO bank. The number of interrupts listed depends
+ on the number of GPIO banks on the SoC. The interrupts must be
+ ordered by bank, starting with bank 0.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+PIN CONFIGURATION NODES:
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+Pinmux functions are available only for the pin groups while pinconf
+parameters are available for both pin groups and individual pins.
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+Required Properties:
+
+- pins: An array of strings, each string containing the name of a pin.
+ These pins are used for selecting the pull control and schmitt
+ trigger parameters. The following are the list of pins
+ available:
+
+ eth_txd0, eth_txd1, eth_txen, eth_rxer, eth_crs_dv,
+ eth_rxd1, eth_rxd0, eth_ref_clk, eth_mdc, eth_mdio,
+ sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0, i2s_lrclk0,
+ i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1, i2s_mclk1,
+ pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, eram_a5,
+ eram_a6, eram_a7, eram_a8, eram_a9, eram_a10, eram_a11,
+ lvds_oep, lvds_oen, lvds_odp, lvds_odn, lvds_ocp,
+ lvds_ocn, lvds_obp, lvds_obn, lvds_oap, lvds_oan,
+ lvds_eep, lvds_een, lvds_edp, lvds_edn, lvds_ecp,
+ lvds_ecn, lvds_ebp, lvds_ebn, lvds_eap, lvds_ean,
+ sd0_d0, sd0_d1, sd0_d2, sd0_d3, sd1_d0, sd1_d1,
+ sd1_d2, sd1_d3, sd0_cmd, sd0_clk, sd1_cmd, sd1_clk,
+ spi0_sclk, spi0_ss, spi0_miso, spi0_mosi, uart0_rx,
+ uart0_tx, uart2_rx, uart2_tx, uart2_rtsb, uart2_ctsb,
+ uart3_rx, uart3_tx, uart3_rtsb, uart3_ctsb, uart4_rx,
+ uart4_tx, i2c0_sclk, i2c0_sdata, i2c1_sclk, i2c1_sdata,
+ i2c2_sclk, i2c2_sdata, csi0_dn0, csi0_dp0, csi0_dn1,
+ csi0_dp1, csi0_cn, csi0_cp, csi0_dn2, csi0_dp2, csi0_dn3,
+ csi0_dp3, dsi_dp3, dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp,
+ dsi_cn, dsi_dp0, dsi_dn0, dsi_dp2, dsi_dn2, sensor0_pclk,
+ csi1_dn0,csi1_dp0,csi1_dn1, csi1_dp1, csi1_cn, csi1_cp,
+ sensor0_ckout, nand0_d0, nand0_d1, nand0_d2, nand0_d3,
+ nand0_d4, nand0_d5, nand0_d6, nand0_d7, nand0_dqs,
+ nand0_dqsn, nand0_ale, nand0_cle, nand0_ceb0, nand0_ceb1,
+ nand0_ceb2, nand0_ceb3, nand1_d0, nand1_d1, nand1_d2,
+ nand1_d3, nand1_d4, nand1_d5, nand1_d6, nand1_d7, nand1_dqs,
+ nand1_dqsn, nand1_ale, nand1_cle, nand1_ceb0, nand1_ceb1,
+ nand1_ceb2, nand1_ceb3, sgpio0, sgpio1, sgpio2, sgpio3
+
+- groups: An array of strings, each string containing the name of a pin
+ group. These pin groups are used for selecting the pinmux
+ functions.
+
+ lvds_oxx_uart4_mfp, rmii_mdc_mfp, rmii_mdio_mfp, sirq0_mfp,
+ sirq1_mfp, rmii_txd0_mfp, rmii_txd1_mfp, rmii_txen_mfp,
+ rmii_rxer_mfp, rmii_crs_dv_mfp, rmii_rxd1_mfp, rmii_rxd0_mfp,
+ rmii_ref_clk_mfp, i2s_d0_mfp, i2s_d1_mfp, i2s_lr_m_clk0_mfp,
+ i2s_bclk0_mfp, i2s_bclk1_mclk1_mfp, pcm1_in_out_mfp,
+ pcm1_clk_mfp, pcm1_sync_mfp, eram_a5_mfp, eram_a6_mfp,
+ eram_a7_mfp, eram_a8_mfp, eram_a9_mfp, eram_a10_mfp,
+ eram_a11_mfp, lvds_oep_odn_mfp, lvds_ocp_obn_mfp,
+ lvds_oap_oan_mfp, lvds_e_mfp, spi0_sclk_mosi_mfp, spi0_ss_mfp,
+ spi0_miso_mfp, uart2_rtsb_mfp, uart2_ctsb_mfp, uart3_rtsb_mfp,
+ uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp, sd0_d2_d3_mfp,
+ sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_clk_mfp,
+ uart0_rx_mfp, nand0_d0_ceb3_mfp, uart0_tx_mfp, i2c0_mfp,
+ csi0_cn_cp_mfp, csi0_dn0_dp3_mfp, csi1_dn0_cp_mfp,
+ dsi_dp3_dn1_mfp, dsi_cp_dn0_mfp, dsi_dp2_dn2_mfp,
+ nand1_d0_ceb1_mfp, nand1_ceb3_mfp, nand1_ceb0_mfp,
+ csi1_dn0_dp0_mfp, uart4_rx_tx_mfp
+
+
+ These pin groups are used for selecting the drive strength
+ parameters.
+
+ sgpio3_drv, sgpio2_drv, sgpio1_drv, sgpio0_drv,
+ rmii_tx_d0_d1_drv, rmii_txen_rxer_drv, rmii_crs_dv_drv,
+ rmii_rx_d1_d0_drv, rmii_ref_clk_drv, rmii_mdc_mdio_drv,
+ sirq_0_1_drv, sirq2_drv, i2s_d0_d1_drv, i2s_lr_m_clk0_drv,
+ i2s_blk1_mclk1_drv, pcm1_in_out_drv, lvds_oap_oan_drv,
+ lvds_oep_odn_drv, lvds_ocp_obn_drv, lvds_e_drv, sd0_d3_d0_drv,
+ sd1_d3_d0_drv, sd0_sd1_cmd_clk_drv, spi0_sclk_mosi_drv,
+ spi0_ss_miso_drv, uart0_rx_tx_drv, uart4_rx_tx_drv, uart2_drv,
+ uart3_drv, i2c0_drv, i2c1_drv, i2c2_drv, sensor0_drv
+
+ These pin groups are used for selecting the slew rate
+ parameters.
+
+ sgpio3_sr, sgpio2_sr, sgpio1_sr, sgpio0_sr, rmii_tx_d0_d1_sr,
+ rmii_txen_rxer_sr, rmii_crs_dv_sr, rmii_rx_d1_d0_sr,
+ rmii_ref_clk_sr, rmii_mdc_mdio_sr, sirq_0_1_sr, sirq2_sr,
+ i2s_do_d1_sr, i2s_lr_m_clk0_sr, i2s_bclk0_mclk1_sr,
+ pcm1_in_out_sr, sd1_d3_d0_sr, sd0_sd1_clk_cmd_sr,
+ spi0_sclk_mosi_sr, spi0_ss_miso_sr, uart0_rx_tx_sr,
+ uart4_rx_tx_sr, uart2_sr, uart3_sr, i2c0_sr, i2c1_sr, i2c2_sr,
+ sensor0_sr
+
+- function: An array of strings, each string containing the name of the
+ pinmux functions. These functions can only be selected by
+ the corresponding pin groups. The following are the list of
+ pinmux functions available:
+
+ eram, eth_rmii, eth_smii, spi0, spi1, spi2, spi3, sens0,
+ uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0, i2s1,
+ pcm0, pcm1, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, sd0,
+ sd1, sd2, sd3, i2c0, i2c1, i2c2, i2c3, i2c4, i2c5, lvds,
+ usb30, usb20, gpu, mipi_csi0, mipi_csi1, mipi_dsi, nand0,
+ nand1, spdif, sirq0, sirq1, sirq2
+
+Optional Properties:
+
+- bias-bus-hold: No arguments. The specified pins should retain the previous
+ state value.
+- bias-high-impedance: No arguments. The specified pins should be configured
+ as high impedance.
+- bias-pull-down: No arguments. The specified pins should be configured as
+ pull down.
+- bias-pull-up: No arguments. The specified pins should be configured as
+ pull up.
+- input-schmitt-enable: No arguments: Enable schmitt trigger for the specified
+ pins
+- input-schmitt-disable: No arguments: Disable schmitt trigger for the specified
+ pins
+- slew-rate: Integer. Sets slew rate for the specified pins.
+ Valid values are:
+ <0> - Slow
+ <1> - Fast
+- drive-strength: Integer. Selects the drive strength for the specified
+ pins in mA.
+ Valid values are:
+ <2>
+ <4>
+ <8>
+ <12>
+
+Example:
+
+ pinctrl: pinctrl@e01b0000 {
+ compatible = "actions,s900-pinctrl";
+ reg = <0x0 0xe01b0000 0x0 0x1000>;
+ clocks = <&cmu CLK_GPIO>;
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 146>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+
+ uart2-default: uart2-default {
+ pinmux {
+ groups = "lvds_oep_odn_mfp";
+ function = "uart2";
+ };
+ pinconf {
+ groups = "lvds_oep_odn_drv";
+ drive-strength = <12>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
new file mode 100644
index 0000000000..4502405703
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
@@ -0,0 +1,302 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/allwinner,sun4i-a10-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Pin Controller
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ "#gpio-cells":
+ const: 3
+ description:
+ GPIO consumers must use three arguments, first the number of the
+ bank, then the pin number inside that bank, and finally the GPIO
+ flags.
+
+ "#interrupt-cells":
+ const: 3
+ description:
+ Interrupts consumers must use three arguments, first the number
+ of the bank, then the pin number inside that bank, and finally
+ the interrupts flags.
+
+ compatible:
+ enum:
+ - allwinner,sun4i-a10-pinctrl
+ - allwinner,sun5i-a10s-pinctrl
+ - allwinner,sun5i-a13-pinctrl
+ - allwinner,sun6i-a31-pinctrl
+ - allwinner,sun6i-a31-r-pinctrl
+ - allwinner,sun6i-a31s-pinctrl
+ - allwinner,sun7i-a20-pinctrl
+ - allwinner,sun8i-a23-pinctrl
+ - allwinner,sun8i-a23-r-pinctrl
+ - allwinner,sun8i-a33-pinctrl
+ - allwinner,sun8i-a83t-pinctrl
+ - allwinner,sun8i-a83t-r-pinctrl
+ - allwinner,sun8i-h3-pinctrl
+ - allwinner,sun8i-h3-r-pinctrl
+ - allwinner,sun8i-r40-pinctrl
+ - allwinner,sun8i-v3-pinctrl
+ - allwinner,sun8i-v3s-pinctrl
+ - allwinner,sun9i-a80-pinctrl
+ - allwinner,sun9i-a80-r-pinctrl
+ - allwinner,sun20i-d1-pinctrl
+ - allwinner,sun50i-a64-pinctrl
+ - allwinner,sun50i-a64-r-pinctrl
+ - allwinner,sun50i-a100-pinctrl
+ - allwinner,sun50i-a100-r-pinctrl
+ - allwinner,sun50i-h5-pinctrl
+ - allwinner,sun50i-h6-pinctrl
+ - allwinner,sun50i-h6-r-pinctrl
+ - allwinner,sun50i-h616-pinctrl
+ - allwinner,sun50i-h616-r-pinctrl
+ - allwinner,suniv-f1c100s-pinctrl
+ - nextthing,gr8-pinctrl
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 8
+ description:
+ One interrupt per external interrupt bank supported on the
+ controller, sorted by bank number ascending order.
+
+ clocks:
+ items:
+ - description: Bus Clock
+ - description: High Frequency Oscillator
+ - description: Low Frequency Oscillator
+
+ clock-names:
+ items:
+ - const: apb
+ - const: hosc
+ - const: losc
+
+ gpio-controller: true
+ interrupt-controller: true
+ gpio-line-names: true
+
+ input-debounce:
+ description:
+ Debouncing periods in microseconds, one period per interrupt
+ bank found in the controller
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 8
+
+patternProperties:
+ # It's pretty scary, but the basic idea is that:
+ # - One node name can start with either s- or r- for PRCM nodes,
+ # - Then, the name itself can be any repetition of <string>- (to
+ # accommodate with nodes like uart4-rts-cts-pins), where each
+ # string can be either starting with 'p' but in a string longer
+ # than 3, or something that doesn't start with 'p',
+ # - Then, the bank name is optional and will be between pa and pg,
+ # pl or pm. Some pins groups that have several options will have
+ # the pin numbers then,
+ # - Finally, the name will end with either -pin or pins.
+
+ "^([rs]-)?(([a-z0-9]{3,}|[a-oq-z][a-z0-9]*?)?-)+?(p[a-ilm][0-9]*?-)??pins?$":
+ type: object
+
+ properties:
+ pins: true
+ function: true
+ bias-disable: true
+ bias-pull-up: true
+ bias-pull-down: true
+
+ drive-strength:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [10, 20, 30, 40]
+
+ required:
+ - pins
+ - function
+
+ additionalProperties: false
+
+ "^vcc-p[a-ilm]-supply$":
+ description:
+ Power supplies for pin banks.
+
+required:
+ - "#gpio-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - gpio-controller
+
+allOf:
+ # FIXME: We should have the pin bank supplies here, but not a lot of
+ # boards are defining it at the moment so it would generate a lot of
+ # warnings.
+
+ - $ref: pinctrl.yaml#
+ - if:
+ not:
+ properties:
+ compatible:
+ enum:
+ - allwinner,sun50i-h616-r-pinctrl
+
+ then:
+ required:
+ - "#interrupt-cells"
+ - interrupts
+ - interrupt-controller
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - allwinner,sun50i-h616-pinctrl
+
+ then:
+ properties:
+ interrupts:
+ minItems: 8
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - allwinner,sun50i-a100-pinctrl
+
+ then:
+ properties:
+ interrupts:
+ minItems: 7
+ maxItems: 7
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - allwinner,sun20i-d1-pinctrl
+
+ then:
+ properties:
+ interrupts:
+ minItems: 6
+ maxItems: 6
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - allwinner,sun9i-a80-pinctrl
+
+ then:
+ properties:
+ interrupts:
+ minItems: 5
+ maxItems: 5
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - allwinner,sun6i-a31-pinctrl
+ - allwinner,sun6i-a31s-pinctrl
+ - allwinner,sun50i-h6-pinctrl
+
+ then:
+ properties:
+ interrupts:
+ minItems: 4
+ maxItems: 4
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - allwinner,sun8i-a23-pinctrl
+ - allwinner,sun8i-a83t-pinctrl
+ - allwinner,sun50i-a64-pinctrl
+ - allwinner,sun50i-h5-pinctrl
+ - allwinner,suniv-f1c100s-pinctrl
+
+ then:
+ properties:
+ interrupts:
+ minItems: 3
+ maxItems: 3
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - allwinner,sun6i-a31-r-pinctrl
+ - allwinner,sun8i-a33-pinctrl
+ - allwinner,sun8i-h3-pinctrl
+ - allwinner,sun8i-v3-pinctrl
+ - allwinner,sun8i-v3s-pinctrl
+ - allwinner,sun9i-a80-r-pinctrl
+ - allwinner,sun50i-h6-r-pinctrl
+
+ then:
+ properties:
+ interrupts:
+ minItems: 2
+ maxItems: 2
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - allwinner,sun4i-a10-pinctrl
+ - allwinner,sun5i-a10s-pinctrl
+ - allwinner,sun5i-a13-pinctrl
+ - allwinner,sun7i-a20-pinctrl
+ - allwinner,sun8i-a23-r-pinctrl
+ - allwinner,sun8i-a83t-r-pinctrl
+ - allwinner,sun8i-h3-r-pinctrl
+ - allwinner,sun8i-r40-pinctrl
+ - allwinner,sun50i-a64-r-pinctrl
+ - allwinner,sun50i-a100-r-pinctrl
+ - nextthing,gr8-pinctrl
+
+ then:
+ properties:
+ interrupts:
+ minItems: 1
+ maxItems: 1
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/sun5i-ccu.h>
+
+ pio: pinctrl@1c20800 {
+ compatible = "allwinner,sun5i-a13-pinctrl";
+ reg = <0x01c20800 0x400>;
+ interrupts = <28>;
+ clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
+ clock-names = "apb", "hosc", "losc";
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #gpio-cells = <3>;
+
+ uart1_pe_pins: uart1-pe-pins {
+ pins = "PE10", "PE11";
+ function = "uart1";
+ };
+
+ uart1_pg_pins: uart1-pg-pins {
+ pins = "PG3", "PG4";
+ function = "uart1";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml
new file mode 100644
index 0000000000..4e7a456ea4
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/amlogic,meson-pinctrl-a1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson A1 pinmux controller
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+ - $ref: amlogic,meson-pinctrl-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - amlogic,c3-periphs-pinctrl
+ - amlogic,meson-a1-periphs-pinctrl
+ - amlogic,meson-s4-periphs-pinctrl
+
+required:
+ - compatible
+
+patternProperties:
+ "^bank@[0-9a-z]+$":
+ $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
+
+ unevaluatedProperties: false
+
+ properties:
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: mux
+ - const: gpio
+
+ gpio-line-names:
+ minItems: 62 # A1
+ maxItems: 82 # S4
+
+unevaluatedProperties:
+ type: object
+ $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins
+
+examples:
+ - |
+ periphs_pinctrl: pinctrl {
+ compatible = "amlogic,meson-a1-periphs-pinctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ bank@400 {
+ reg = <0x0400 0x003c>,
+ <0x0480 0x0118>;
+ reg-names = "mux", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 0 62>;
+ };
+
+ cec_ao_a_h_pins: cec_ao_a_h {
+ mux {
+ groups = "cec_ao_a_h";
+ function = "cec_ao_a_h";
+ bias-disable;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml
new file mode 100644
index 0000000000..e707c222a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-common.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/amlogic,meson-pinctrl-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson pinmux controller
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+properties:
+ ranges: true
+
+ "#address-cells":
+ enum: [1, 2]
+
+ "#size-cells":
+ enum: [1, 2]
+
+required:
+ - ranges
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: true
+
+$defs:
+ meson-gpio:
+ type: object
+
+ properties:
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ patternProperties:
+ "^.+-hog(-[0-9]+)?$":
+ type: object
+
+ required:
+ - gpio-hog
+
+ required:
+ - reg
+ - reg-names
+ - gpio-controller
+ - "#gpio-cells"
+ - gpio-ranges
+
+ meson-pins:
+ type: object
+ additionalProperties:
+ type: object
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml
new file mode 100644
index 0000000000..0942ea60c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/amlogic,meson-pinctrl-g12a-aobus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson G12 AOBUS pinmux controller
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+ - $ref: amlogic,meson-pinctrl-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - amlogic,meson-g12a-aobus-pinctrl
+
+required:
+ - compatible
+
+patternProperties:
+ "^bank@[0-9a-z]+$":
+ $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
+
+ unevaluatedProperties: false
+
+ properties:
+ reg:
+ maxItems: 3
+
+ reg-names:
+ items:
+ - const: mux
+ - const: ds
+ - const: gpio
+
+ gpio-line-names:
+ maxItems: 15
+
+unevaluatedProperties:
+ type: object
+ $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins
+
+examples:
+ - |
+ ao_pinctrl: pinctrl {
+ compatible = "amlogic,meson-g12a-aobus-pinctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ bank@14 {
+ reg = <0x14 0x8>,
+ <0x1c 0x8>,
+ <0x24 0x14>;
+ reg-names = "mux", "ds", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&ao_pinctrl 0 0 15>;
+ };
+
+ cec_ao_a_h_pins: cec_ao_a_h {
+ mux {
+ groups = "cec_ao_a_h";
+ function = "cec_ao_a_h";
+ bias-disable;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml
new file mode 100644
index 0000000000..e3c8bde305
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/amlogic,meson-pinctrl-g12a-periphs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson G12 PERIPHS pinmux controller
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+ - $ref: amlogic,meson-pinctrl-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - amlogic,meson-g12a-periphs-pinctrl
+
+required:
+ - compatible
+
+patternProperties:
+ "^bank@[0-9a-z]+$":
+ $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
+
+ unevaluatedProperties: false
+
+ properties:
+ reg:
+ maxItems: 5
+
+ reg-names:
+ items:
+ - const: gpio
+ - const: pull
+ - const: pull-enable
+ - const: mux
+ - const: ds
+
+ gpio-line-names:
+ maxItems: 85
+
+unevaluatedProperties:
+ type: object
+ $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins
+
+examples:
+ - |
+ periphs_pinctrl: pinctrl {
+ compatible = "amlogic,meson-g12a-periphs-pinctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ bank@40 {
+ reg = <0x40 0x4c>,
+ <0xe8 0x18>,
+ <0x120 0x18>,
+ <0x2c0 0x40>,
+ <0x340 0x1c>;
+ reg-names = "gpio", "pull", "pull-enable", "mux", "ds";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 0 86>;
+ };
+
+ cec_ao_a_h_pins: cec_ao_a_h {
+ mux {
+ groups = "cec_ao_a_h";
+ function = "cec_ao_a_h";
+ bias-disable;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml
new file mode 100644
index 0000000000..c1b03147e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-aobus.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/amlogic,meson8-pinctrl-aobus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson8 AOBUS pinmux controller
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+ - $ref: amlogic,meson-pinctrl-common.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - amlogic,meson8-aobus-pinctrl
+ - amlogic,meson8b-aobus-pinctrl
+ - amlogic,meson-gxbb-aobus-pinctrl
+ - amlogic,meson-gxl-aobus-pinctrl
+ - amlogic,meson-axg-aobus-pinctrl
+ - items:
+ - const: amlogic,meson8m2-aobus-pinctrl
+ - const: amlogic,meson8-aobus-pinctrl
+
+required:
+ - compatible
+
+patternProperties:
+ "^bank@[0-9a-z]+$":
+ $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
+
+ unevaluatedProperties: false
+
+ properties:
+ reg:
+ maxItems: 3
+
+ reg-names:
+ items:
+ - const: mux
+ - const: pull
+ - const: gpio
+
+ gpio-line-names:
+ minItems: 11 # GXL
+ maxItems: 16 # Meson8
+
+unevaluatedProperties:
+ type: object
+ $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins
+
+examples:
+ - |
+ pinctrl_aobus: pinctrl {
+ compatible = "amlogic,meson8-aobus-pinctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ bank@14 {
+ reg = <0x14 0x4>,
+ <0x2c 0x4>,
+ <0x24 0x8>;
+ reg-names = "mux", "pull", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl_aobus 0 0 16>;
+ };
+
+ cec_ao_a_h_pins: cec_ao_a_h {
+ mux {
+ groups = "cec_ao_a_h";
+ function = "cec_ao_a_h";
+ bias-disable;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml
new file mode 100644
index 0000000000..4ec85b8248
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson8-pinctrl-cbus.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/amlogic,meson8-pinctrl-cbus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson8 CBUS pinmux controller
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+allOf:
+ - $ref: amlogic,meson-pinctrl-common.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - amlogic,meson8-cbus-pinctrl
+ - amlogic,meson8b-cbus-pinctrl
+ - amlogic,meson-gxbb-periphs-pinctrl
+ - amlogic,meson-gxl-periphs-pinctrl
+ - amlogic,meson-axg-periphs-pinctrl
+ - items:
+ - const: amlogic,meson8m2-cbus-pinctrl
+ - const: amlogic,meson8-cbus-pinctrl
+
+required:
+ - compatible
+
+patternProperties:
+ "^bank@[0-9a-z]+$":
+ $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-gpio
+
+ unevaluatedProperties: false
+
+ properties:
+ reg:
+ maxItems: 4
+
+ reg-names:
+ items:
+ - const: mux
+ - const: pull
+ - const: pull-enable
+ - const: gpio
+
+ gpio-line-names:
+ minItems: 86 # AXG
+ maxItems: 120 # Meson8
+
+unevaluatedProperties:
+ type: object
+ $ref: amlogic,meson-pinctrl-common.yaml#/$defs/meson-pins
+
+examples:
+ - |
+ pinctrl_cbus: pinctrl {
+ compatible = "amlogic,meson8-cbus-pinctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ bank@80b0 {
+ reg = <0x80b0 0x28>,
+ <0x80e8 0x18>,
+ <0x8120 0x18>,
+ <0x8030 0x30>;
+ reg-names = "mux", "pull", "pull-enable", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl_cbus 0 0 120>;
+ };
+
+ cec_ao_a_h_pins: cec_ao_a_h {
+ mux {
+ groups = "cec_ao_a_h";
+ function = "cec_ao_a_h";
+ bias-disable;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
new file mode 100644
index 0000000000..9c07935919
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/apple,pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple GPIO controller
+
+maintainers:
+ - Mark Kettenis <kettenis@openbsd.org>
+
+description: |
+ The Apple GPIO controller is a simple combined pin and GPIO
+ controller present on Apple ARM SoC platforms, including various
+ iPhone and iPad devices and the "Apple Silicon" Macs.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - apple,t8103-pinctrl
+ - apple,t8112-pinctrl
+ - apple,t6000-pinctrl
+ - const: apple,pinctrl
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ apple,npins:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: The number of pins in this GPIO controller.
+
+ interrupts:
+ description: One interrupt for each of the (up to 7) interrupt
+ groups supported by the controller sorted by interrupt group
+ number in ascending order.
+ minItems: 1
+ maxItems: 7
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+ power-domains:
+ maxItems: 1
+
+patternProperties:
+ '-pins$':
+ type: object
+ $ref: pinmux-node.yaml#
+
+ properties:
+ pinmux:
+ description:
+ Values are constructed from pin number and alternate function
+ configuration number using the APPLE_PINMUX() helper macro
+ defined in include/dt-bindings/pinctrl/apple.h.
+
+ required:
+ - pinmux
+
+ additionalProperties: false
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+ - apple,npins
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/apple-aic.h>
+ #include <dt-bindings/pinctrl/apple.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pinctrl: pinctrl@23c100000 {
+ compatible = "apple,t8103-pinctrl", "apple,pinctrl";
+ reg = <0x2 0x3c100000 0x0 0x100000>;
+ clocks = <&gpio_clk>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 0 212>;
+ apple,npins = <212>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&aic>;
+ interrupts = <AIC_IRQ 16 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 17 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 18 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 19 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 20 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 21 IRQ_TYPE_LEVEL_HIGH>,
+ <AIC_IRQ 22 IRQ_TYPE_LEVEL_HIGH>;
+
+ pcie_pins: pcie-pins {
+ pinmux = <APPLE_PINMUX(150, 1)>,
+ <APPLE_PINMUX(151, 1)>,
+ <APPLE_PINMUX(32, 1)>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
new file mode 100644
index 0000000000..37c0a74c7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/aspeed,ast2400-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED AST2400 Pin Controller
+
+maintainers:
+ - Andrew Jeffery <andrew@aj.id.au>
+
+description: |+
+ The pin controller node should be the child of a syscon node with the
+ required property:
+
+ - compatible: Should be one of the following:
+ "aspeed,ast2400-scu", "syscon", "simple-mfd"
+
+ Refer to the bindings described in
+ Documentation/devicetree/bindings/mfd/syscon.yaml
+
+properties:
+ compatible:
+ const: aspeed,ast2400-pinctrl
+ reg:
+ maxItems: 2
+
+additionalProperties:
+ $ref: pinmux-node.yaml#
+ additionalProperties: false
+
+ properties:
+ pins: true
+ bias-disable: true
+
+ patternProperties:
+ "^function|groups$":
+ enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
+ ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
+ EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0,
+ GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4,
+ I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK,
+ MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2,
+ NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4,
+ NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0,
+ PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1,
+ RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3,
+ RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD,
+ SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO,
+ SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU,
+ SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2,
+ TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM,
+ VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2]
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+
+examples:
+ - |
+ syscon: scu@1e6e2000 {
+ compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
+ reg = <0x1e6e2000 0x1a8>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1e6e2000 0x1000>;
+
+ pinctrl: pinctrl {
+ compatible = "aspeed,ast2400-pinctrl";
+
+ pinctrl_i2c3_default: i2c3_default {
+ function = "I2C3";
+ groups = "I2C3";
+ };
+
+ pinctrl_gpioh0_unbiased_default: gpioh0 {
+ pins = "A8";
+ bias-disable;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
new file mode 100644
index 0000000000..863da5d808
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/aspeed,ast2500-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED AST2500 Pin Controller
+
+maintainers:
+ - Andrew Jeffery <andrew@aj.id.au>
+
+description: |+
+ The pin controller node should be the child of a syscon node with the
+ required property:
+
+ - compatible: Should be one of the following:
+ "aspeed,ast2500-scu", "syscon", "simple-mfd"
+ "aspeed,g5-scu", "syscon", "simple-mfd"
+
+ Refer to the bindings described in
+ Documentation/devicetree/bindings/mfd/syscon.yaml
+
+properties:
+ compatible:
+ const: aspeed,ast2500-pinctrl
+ reg:
+ maxItems: 2
+
+ aspeed,external-nodes:
+ minItems: 2
+ maxItems: 2
+ items:
+ maxItems: 1
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: |
+ A cell of phandles to external controller nodes:
+ 0: compatible with "aspeed,ast2500-gfx", "syscon"
+ 1: compatible with "aspeed,ast2500-lhc", "syscon"
+
+additionalProperties:
+ $ref: pinmux-node.yaml#
+ additionalProperties: false
+
+ properties:
+ pins: true
+ bias-disable: true
+
+ patternProperties:
+ "^function|groups$":
+ enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15,
+ ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT,
+ ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2,
+ GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5,
+ I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC,
+ LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK,
+ MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4,
+ NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2,
+ NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0,
+ PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1,
+ RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13,
+ SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1,
+ SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO,
+ SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG,
+ SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3,
+ TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6,
+ USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS,
+ VGAVS, VPI24, VPO, WDTRST1, WDTRST2]
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - aspeed,external-nodes
+
+examples:
+ - |
+ #include <dt-bindings/clock/aspeed-clock.h>
+ scu@1e6e2000 {
+ compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
+ reg = <0x1e6e2000 0x1a8>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1e6e2000 0x1000>;
+
+ pinctrl: pinctrl {
+ compatible = "aspeed,ast2500-pinctrl";
+ aspeed,external-nodes = <&gfx>, <&lhc>;
+
+ pinctrl_i2c3_default: i2c3_default {
+ function = "I2C3";
+ groups = "I2C3";
+ };
+
+ pinctrl_gpioh0_unbiased_default: gpioh0 {
+ pins = "A18";
+ bias-disable;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
new file mode 100644
index 0000000000..612464aef9
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: GPL-2.0+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/aspeed,ast2600-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED AST2600 Pin Controller
+
+maintainers:
+ - Andrew Jeffery <andrew@aj.id.au>
+
+description: |+
+ The pin controller node should be the child of a syscon node with the
+ required property:
+
+ - compatible: Should be one of the following:
+ "aspeed,ast2600-scu", "syscon", "simple-mfd"
+
+ Refer to the bindings described in
+ Documentation/devicetree/bindings/mfd/syscon.yaml
+
+properties:
+ compatible:
+ const: aspeed,ast2600-pinctrl
+
+additionalProperties:
+ $ref: pinmux-node.yaml#
+ additionalProperties: false
+
+ properties:
+ function:
+ enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
+ ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT,
+ FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3,
+ GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5,
+ GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16,
+ I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5,
+ I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ,
+ MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4,
+ NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2,
+ NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4,
+ NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11,
+ PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8,
+ PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4,
+ RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14,
+ SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8,
+ SALT9, SD1, SD2, SGPM1, SGPM2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO,
+ SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2,
+ SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14,
+ TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0,
+ THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12,
+ UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP,
+ USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4 ]
+
+ groups:
+ enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
+ ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4,
+ EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP,
+ GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
+ GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10,
+ I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5,
+ I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ,
+ LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3,
+ MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4,
+ NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2,
+ NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4,
+ OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0,
+ PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2,
+ PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1,
+ QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4,
+ RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1,
+ SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0,
+ SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6,
+ SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPM2, SGPS1, SGPS2,
+ SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1,
+ SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11,
+ TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6,
+ TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3,
+ TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6,
+ UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2,
+ WDTRST3, WDTRST4]
+
+ pins: true
+ bias-disable: true
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+
+examples:
+ - |
+ syscon: scu@1e6e2000 {
+ compatible = "aspeed,ast2600-scu", "syscon", "simple-mfd";
+ reg = <0x1e6e2000 0xf6c>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x1e6e2000 0x1000>;
+
+ pinctrl: pinctrl {
+ compatible = "aspeed,ast2600-pinctrl";
+
+ pinctrl_pwm10g1_default: pwm10g1_default {
+ function = "PWM10";
+ groups = "PWM10G1";
+ };
+
+ pinctrl_gpioh0_unbiased_default: gpioh0 {
+ pins = "A18";
+ bias-disable;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
new file mode 100644
index 0000000000..e8abbdad7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
@@ -0,0 +1,176 @@
+* Atmel AT91 Pinmux Controller
+
+The AT91 Pinmux Controller, enables the IC
+to share one PAD to several functional blocks. The sharing is done by
+multiplexing the PAD input/output signals. For each PAD there are up to
+8 muxing options (called periph modes). Since different modules require
+different PAD settings (like pull up, keeper, etc) the controller controls
+also the PAD settings parameters.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Atmel AT91 pin configuration node is a node of a group of pins which can be
+used for a specific device or function. This node represents both mux and config
+of the pins in that group. The 'pins' selects the function mode(also named pin
+mode) this pin can work on and the 'config' configures various pad settings
+such as pull-up, multi drive, etc.
+
+Required properties for iomux controller:
+- compatible: "atmel,at91rm9200-pinctrl" or "atmel,at91sam9x5-pinctrl"
+ or "atmel,sama5d3-pinctrl" or "microchip,sam9x60-pinctrl"
+- atmel,mux-mask: array of mask (periph per bank) to describe if a pin can be
+ configured in this periph mode. All the periph and bank need to be describe.
+
+How to create such array:
+
+Each column will represent the possible peripheral of the pinctrl
+Each line will represent a pio bank
+
+Take an example on the 9260
+Peripheral: 2 ( A and B)
+Bank: 3 (A, B and C)
+=>
+
+ /* A B */
+ 0xffffffff 0xffc00c3b /* pioA */
+ 0xffffffff 0x7fff3ccf /* pioB */
+ 0xffffffff 0x007fffff /* pioC */
+
+For each peripheral/bank we will describe in a u32 if a pin can be
+configured in it by putting 1 to the pin bit (1 << pin)
+
+Let's take the pioA on peripheral B
+From the datasheet Table 10-2.
+Peripheral B
+PA0 MCDB0
+PA1 MCCDB
+PA2
+PA3 MCDB3
+PA4 MCDB2
+PA5 MCDB1
+PA6
+PA7
+PA8
+PA9
+PA10 ETX2
+PA11 ETX3
+PA12
+PA13
+PA14
+PA15
+PA16
+PA17
+PA18
+PA19
+PA20
+PA21
+PA22 ETXER
+PA23 ETX2
+PA24 ETX3
+PA25 ERX2
+PA26 ERX3
+PA27 ERXCK
+PA28 ECRS
+PA29 ECOL
+PA30 RXD4
+PA31 TXD4
+
+=> 0xffc00c3b
+
+Required properties for pin configuration node:
+- atmel,pins: 4 integers array, represents a group of pins mux and config
+ setting. The format is atmel,pins = <PIN_BANK PIN_BANK_NUM PERIPH CONFIG>.
+ The PERIPH 0 means gpio, PERIPH 1 is periph A, PERIPH 2 is periph B...
+ PIN_BANK 0 is pioA, PIN_BANK 1 is pioB...
+
+Bits used for CONFIG:
+PULL_UP (1 << 0): indicate this pin needs a pull up.
+MULTIDRIVE (1 << 1): indicate this pin needs to be configured as multi-drive.
+ Multi-drive is equivalent to open-drain type output.
+DEGLITCH (1 << 2): indicate this pin needs deglitch.
+PULL_DOWN (1 << 3): indicate this pin needs a pull down.
+DIS_SCHMIT (1 << 4): indicate this pin needs to the disable schmitt trigger.
+DRIVE_STRENGTH (3 << 5): indicate the drive strength of the pin using the
+ following values:
+ 00 - No change (reset state value kept)
+ 01 - Low
+ 10 - Medium
+ 11 - High
+OUTPUT (1 << 7): indicate this pin need to be configured as an output.
+OUTPUT_VAL (1 << 8): output val (1 = high, 0 = low)
+SLEWRATE (1 << 9): slew rate of the pin: 0 = disable, 1 = enable
+DEBOUNCE (1 << 16): indicate this pin needs debounce.
+DEBOUNCE_VAL (0x3fff << 17): debounce value.
+
+NOTE:
+Some requirements for using atmel,at91rm9200-pinctrl binding:
+1. We have pin function node defined under at91 controller node to represent
+ what pinmux functions this SoC supports.
+2. The driver can use the function node's name and pin configuration node's
+ name describe the pin function and group hierarchy.
+ For example, Linux at91 pinctrl driver takes the function node's name
+ as the function name and pin configuration node's name as group name to
+ create the map table.
+3. Each pin configuration node should have a phandle, devices can set pins
+ configurations by referring to the phandle of that pin configuration node.
+4. The gpio controller must be describe in the pinctrl simple-bus.
+
+For each bank the required properties are:
+- compatible: "atmel,at91sam9x5-gpio" or "atmel,at91rm9200-gpio" or
+ "microchip,sam9x60-gpio"
+- reg: physical base address and length of the controller's registers
+- interrupts: interrupt outputs from the controller
+- interrupt-controller: marks the device node as an interrupt controller
+- #interrupt-cells: should be 2; refer to ../interrupt-controller/interrupts.txt
+ for more details.
+- gpio-controller
+- #gpio-cells: should be 2; the first cell is the GPIO number and the second
+ cell specifies GPIO flags as defined in <dt-bindings/gpio/gpio.h>.
+- clocks: bank clock
+
+Examples:
+
+pinctrl@fffff400 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+ reg = <0xfffff400 0x600>;
+
+ pioA: gpio@fffff400 {
+ compatible = "atmel,at91sam9x5-gpio";
+ reg = <0xfffff400 0x200>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+ };
+
+ atmel,mux-mask = <
+ /* A B */
+ 0xffffffff 0xffc00c3b /* pioA */
+ 0xffffffff 0x7fff3ccf /* pioB */
+ 0xffffffff 0x007fffff /* pioC */
+ >;
+
+ /* shared pinctrl settings */
+ dbgu {
+ pinctrl_dbgu: dbgu-0 {
+ atmel,pins =
+ <1 14 0x1 0x0 /* PB14 periph A */
+ 1 15 0x1 0x1>; /* PB15 periph A with pullup */
+ };
+ };
+};
+
+dbgu: serial@fffff200 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffff200 0x200>;
+ interrupts = <1 4 7>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dbgu>;
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
new file mode 100644
index 0000000000..774c3c269c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pio4-pinctrl.txt
@@ -0,0 +1,98 @@
+* Atmel PIO4 Controller
+
+The Atmel PIO4 controller is used to select the function of a pin and to
+configure it.
+
+Required properties:
+- compatible:
+ "atmel,sama5d2-pinctrl"
+ "microchip,sama7g5-pinctrl"
+- reg: base address and length of the PIO controller.
+- interrupts: interrupt outputs from the controller, one for each bank.
+- interrupt-controller: mark the device node as an interrupt controller.
+- #interrupt-cells: should be two.
+- gpio-controller: mark the device node as a gpio controller.
+- #gpio-cells: should be two.
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices.
+
+Subnode format
+Each node (or subnode) will list the pins it needs and how to configured these
+pins.
+
+ node {
+ pinmux = <PIN_NUMBER_PINMUX>;
+ GENERIC_PINCONFIG;
+ };
+
+Required properties:
+- pinmux: integer array. Each integer represents a pin number plus mux and
+ioset settings. Use the macros from boot/dts/<soc>-pinfunc.h file to get the
+right representation of the pin.
+
+Optional properties:
+- GENERIC_PINCONFIG: generic pinconfig options to use:
+ - bias-disable, bias-pull-down, bias-pull-up, drive-open-drain,
+ drive-push-pull input-schmitt-enable, input-debounce, output-low,
+ output-high.
+ - for microchip,sama7g5-pinctrl only:
+ - slew-rate: 0 - disabled, 1 - enabled (default)
+- atmel,drive-strength: 0 or 1 for low drive, 2 for medium drive and 3 for
+high drive. The default value is low drive.
+
+Example:
+
+#include <sama5d2-pinfunc.h>
+
+...
+{
+ pioA: pinctrl@fc038000 {
+ compatible = "atmel,sama5d2-pinctrl";
+ reg = <0xfc038000 0x600>;
+ interrupts = <18 IRQ_TYPE_LEVEL_HIGH 7>,
+ <68 IRQ_TYPE_LEVEL_HIGH 7>,
+ <69 IRQ_TYPE_LEVEL_HIGH 7>,
+ <70 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&pioA_clk>;
+
+ pinctrl_i2c0_default: i2c0_default {
+ pinmux = <PIN_PD21__TWD0>,
+ <PIN_PD22__TWCK0>;
+ bias-disable;
+ };
+
+ pinctrl_led_gpio_default: led_gpio_default {
+ pinmux = <PIN_PB0>,
+ <PIN_PB5>;
+ bias-pull-up;
+ atmel,drive-strength = <ATMEL_PIO_DRVSTR_ME>;
+ };
+
+ pinctrl_sdmmc1_default: sdmmc1_default {
+ cmd_data {
+ pinmux = <PIN_PA28__SDMMC1_CMD>,
+ <PIN_PA18__SDMMC1_DAT0>,
+ <PIN_PA19__SDMMC1_DAT1>,
+ <PIN_PA20__SDMMC1_DAT2>,
+ <PIN_PA21__SDMMC1_DAT3>;
+ bias-pull-up;
+ };
+
+ ck_cd {
+ pinmux = <PIN_PA22__SDMMC1_CK>,
+ <PIN_PA30__SDMMC1_CD>;
+ bias-disable;
+ };
+ };
+ ...
+ };
+};
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt
new file mode 100644
index 0000000000..678f509705
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt
@@ -0,0 +1,87 @@
+Axis ARTPEC-6 Pin Controller
+
+Required properties:
+- compatible: "axis,artpec6-pinctrl".
+- reg: Should contain the register physical address and length for the pin
+ controller.
+
+A pinctrl node should contain at least one subnode representing the pinctrl
+groups available on the machine. Each subnode will list the mux function
+required and what pin group it will use. Each subnode will also configure the
+drive strength and bias pullup of the pin group. If either of these options is
+not set, its actual value will be unspecified.
+
+
+Required subnode-properties:
+- function: Function to mux.
+- groups: Name of the pin group to use for the function above.
+
+ Available functions and groups (function: group0, group1...):
+ gpio: cpuclkoutgrp0, udlclkoutgrp0, i2c1grp0, i2c2grp0,
+ i2c3grp0, i2s0grp0, i2s1grp0, i2srefclkgrp0, spi0grp0,
+ spi1grp0, pciedebuggrp0, uart0grp0, uart0grp1, uart0grp2,
+ uart1grp0, uart1grp1, uart2grp0, uart2grp1, uart2grp2,
+ uart3grp0, uart4grp0, uart4grp1, uart5grp0, uart5grp1,
+ uart5nocts
+ cpuclkout: cpuclkoutgrp0
+ udlclkout: udlclkoutgrp0
+ i2c1: i2c1grp0
+ i2c2: i2c2grp0
+ i2c3: i2c3grp0
+ i2s0: i2s0grp0
+ i2s1: i2s1grp0
+ i2srefclk: i2srefclkgrp0
+ spi0: spi0grp0
+ spi1: spi1grp0
+ pciedebug: pciedebuggrp0
+ uart0: uart0grp0, uart0grp1, uart0grp2
+ uart1: uart1grp0, uart1grp1
+ uart2: uart2grp0, uart2grp1, uart2grp2
+ uart3: uart3grp0
+ uart4: uart4grp0, uart4grp1
+ uart5: uart5grp0, uart5grp1, uart5nocts
+ nand: nandgrp0
+ sdio0: sdio0grp0
+ sdio1: sdio1grp0
+ ethernet: ethernetgrp0
+
+
+Optional subnode-properties (see pinctrl-bindings.txt):
+- drive-strength: 4, 6, 8, 9 mA. For SD and NAND pins, this is for 3.3V VCCQ3.
+- bias-pull-up
+- bias-disable
+
+Examples:
+pinctrl@f801d000 {
+ compatible = "axis,artpec6-pinctrl";
+ reg = <0xf801d000 0x400>;
+
+ pinctrl_uart0: uart0grp {
+ function = "uart0";
+ groups = "uart0grp0";
+ drive-strength = <4>;
+ bias-pull-up;
+ };
+ pinctrl_uart3: uart3grp {
+ function = "uart3";
+ groups = "uart3grp0";
+ };
+};
+uart0: uart@f8036000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xf8036000 0x1000>;
+ interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pll2div24>, <&apb_pclk>;
+ clock-names = "uart_clk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+};
+uart3: uart@f8039000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xf8039000 0x1000>;
+ interrupts = <0 128 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pll2div24>, <&apb_pclk>;
+ clock-names = "uart_clk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/berlin,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/berlin,pinctrl.txt
new file mode 100644
index 0000000000..0a2d5516e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/berlin,pinctrl.txt
@@ -0,0 +1,47 @@
+* Pin-controller driver for the Marvell Berlin SoCs
+
+Pin control registers are part of both chip controller and system
+controller register sets. Pin controller nodes should be a sub-node of
+either the chip controller or system controller node. The pins
+controlled are organized in groups, so no actual pin information is
+needed.
+
+A pin-controller node should contain subnodes representing the pin group
+configurations, one per function. Each subnode has the group name and
+the muxing function used.
+
+Be aware the Marvell Berlin datasheets use the keyword 'mode' for what
+is called a 'function' in the pin-controller subsystem.
+
+Required properties:
+- compatible: should be one of:
+ "marvell,berlin2-soc-pinctrl",
+ "marvell,berlin2-system-pinctrl",
+ "marvell,berlin2cd-soc-pinctrl",
+ "marvell,berlin2cd-system-pinctrl",
+ "marvell,berlin2q-soc-pinctrl",
+ "marvell,berlin2q-system-pinctrl",
+ "marvell,berlin4ct-avio-pinctrl",
+ "marvell,berlin4ct-soc-pinctrl",
+ "marvell,berlin4ct-system-pinctrl",
+ "syna,as370-soc-pinctrl"
+
+Required subnode-properties:
+- groups: a list of strings describing the group names.
+- function: a string describing the function used to mux the groups.
+
+Example:
+
+sys_pinctrl: pin-controller {
+ compatible = "marvell,berlin2q-system-pinctrl";
+
+ uart0_pmux: uart0-pmux {
+ groups = "GSM12";
+ function = "uart0";
+ };
+};
+
+&uart0 {
+ pinctrl-0 = <&uart0_pmux>;
+ pinctrl-names = "default";
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.txt
new file mode 100644
index 0000000000..4980776122
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.txt
@@ -0,0 +1,126 @@
+Bitmain BM1880 Pin Controller
+
+This binding describes the pin controller found in the BM1880 SoC.
+
+Required Properties:
+
+- compatible: Should be "bitmain,bm1880-pinctrl"
+- reg: Offset and length of pinctrl space in SCTRL.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration for BM1880 SoC
+includes pinmux and various pin configuration parameters, such as pull-up,
+slew rate etc...
+
+Each configuration node can consist of multiple nodes describing the pinmux
+options. The name of each subnode is not important; all subnodes should be
+enumerated and processed purely based on their content.
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pinmux subnode:
+
+Required Properties:
+
+- pins: An array of strings, each string containing the name of a pin.
+ Valid values for pins are:
+
+ MIO0 - MIO111
+
+- groups: An array of strings, each string containing the name of a pin
+ group. Valid values for groups are:
+
+ nand_grp, spi_grp, emmc_grp, sdio_grp, eth0_grp, pwm0_grp,
+ pwm1_grp, pwm2_grp, pwm3_grp, pwm4_grp, pwm5_grp, pwm6_grp,
+ pwm7_grp, pwm8_grp, pwm9_grp, pwm10_grp, pwm11_grp, pwm12_grp,
+ pwm13_grp, pwm14_grp, pwm15_grp, pwm16_grp, pwm17_grp,
+ pwm18_grp, pwm19_grp, pwm20_grp, pwm21_grp, pwm22_grp,
+ pwm23_grp, pwm24_grp, pwm25_grp, pwm26_grp, pwm27_grp,
+ pwm28_grp, pwm29_grp, pwm30_grp, pwm31_grp, pwm32_grp,
+ pwm33_grp, pwm34_grp, pwm35_grp, pwm36_grp, i2c0_grp,
+ i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp, uart0_grp, uart1_grp,
+ uart2_grp, uart3_grp, uart4_grp, uart5_grp, uart6_grp,
+ uart7_grp, uart8_grp, uart9_grp, uart10_grp, uart11_grp,
+ uart12_grp, uart13_grp, uart14_grp, uart15_grp, gpio0_grp,
+ gpio1_grp, gpio2_grp, gpio3_grp, gpio4_grp, gpio5_grp,
+ gpio6_grp, gpio7_grp, gpio8_grp, gpio9_grp, gpio10_grp,
+ gpio11_grp, gpio12_grp, gpio13_grp, gpio14_grp, gpio15_grp,
+ gpio16_grp, gpio17_grp, gpio18_grp, gpio19_grp, gpio20_grp,
+ gpio21_grp, gpio22_grp, gpio23_grp, gpio24_grp, gpio25_grp,
+ gpio26_grp, gpio27_grp, gpio28_grp, gpio29_grp, gpio30_grp,
+ gpio31_grp, gpio32_grp, gpio33_grp, gpio34_grp, gpio35_grp,
+ gpio36_grp, gpio37_grp, gpio38_grp, gpio39_grp, gpio40_grp,
+ gpio41_grp, gpio42_grp, gpio43_grp, gpio44_grp, gpio45_grp,
+ gpio46_grp, gpio47_grp, gpio48_grp, gpio49_grp, gpio50_grp,
+ gpio51_grp, gpio52_grp, gpio53_grp, gpio54_grp, gpio55_grp,
+ gpio56_grp, gpio57_grp, gpio58_grp, gpio59_grp, gpio60_grp,
+ gpio61_grp, gpio62_grp, gpio63_grp, gpio64_grp, gpio65_grp,
+ gpio66_grp, gpio67_grp, eth1_grp, i2s0_grp, i2s0_mclkin_grp,
+ i2s1_grp, i2s1_mclkin_grp, spi0_grp
+
+- function: An array of strings, each string containing the name of the
+ pinmux functions. The following are the list of pinmux
+ functions available:
+
+ nand, spi, emmc, sdio, eth0, pwm0, pwm1, pwm2, pwm3, pwm4,
+ pwm5, pwm6, pwm7, pwm8, pwm9, pwm10, pwm11, pwm12, pwm13,
+ pwm14, pwm15, pwm16, pwm17, pwm18, pwm19, pwm20, pwm21, pwm22,
+ pwm23, pwm24, pwm25, pwm26, pwm27, pwm28, pwm29, pwm30, pwm31,
+ pwm32, pwm33, pwm34, pwm35, pwm36, i2c0, i2c1, i2c2, i2c3,
+ i2c4, uart0, uart1, uart2, uart3, uart4, uart5, uart6, uart7,
+ uart8, uart9, uart10, uart11, uart12, uart13, uart14, uart15,
+ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, gpio8,
+ gpio9, gpio10, gpio11, gpio12, gpio13, gpio14, gpio15, gpio16,
+ gpio17, gpio18, gpio19, gpio20, gpio21, gpio22, gpio23,
+ gpio24, gpio25, gpio26, gpio27, gpio28, gpio29, gpio30,
+ gpio31, gpio32, gpio33, gpio34, gpio35, gpio36, gpio37,
+ gpio38, gpio39, gpio40, gpio41, gpio42, gpio43, gpio44,
+ gpio45, gpio46, gpio47, gpio48, gpio49, gpio50, gpio51,
+ gpio52, gpio53, gpio54, gpio55, gpio56, gpio57, gpio58,
+ gpio59, gpio60, gpio61, gpio62, gpio63, gpio64, gpio65,
+ gpio66, gpio67, eth1, i2s0, i2s0_mclkin, i2s1, i2s1_mclkin,
+ spi0
+
+Optional Properties:
+
+- bias-disable: No arguments. Disable pin bias.
+- bias-pull-down: No arguments. The specified pins should be configured as
+ pull down.
+- bias-pull-up: No arguments. The specified pins should be configured as
+ pull up.
+- input-schmitt-enable: No arguments: Enable schmitt trigger for the specified
+ pins
+- input-schmitt-disable: No arguments: Disable schmitt trigger for the specified
+ pins
+- slew-rate: Integer. Sets slew rate for the specified pins.
+ Valid values are:
+ <0> - Slow
+ <1> - Fast
+- drive-strength: Integer. Selects the drive strength for the specified
+ pins in mA.
+ Valid values are:
+ <4>
+ <8>
+ <12>
+ <16>
+ <20>
+ <24>
+ <28>
+ <32>
+
+Example:
+ pinctrl: pinctrl@400 {
+ compatible = "bitmain,bm1880-pinctrl";
+ reg = <0x400 0x120>;
+
+ pinctrl_uart0_default: uart0-default {
+ pinmux {
+ groups = "uart0_grp";
+ function = "uart0";
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.yaml
new file mode 100644
index 0000000000..90c2752951
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.yaml
@@ -0,0 +1,259 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm11351-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM281xx pin controller
+
+maintainers:
+ - Florian Fainelli <florian.fainelli@broadcom.com>
+ - Ray Jui <rjui@broadcom.com>
+ - Scott Branden <sbranden@broadcom.com>
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+properties:
+ compatible:
+ const: brcm,bcm11351-pinctrl
+
+ reg:
+ maxItems: 1
+
+patternProperties:
+ '-pins$':
+ type: object
+ additionalProperties: false
+
+ patternProperties:
+ '-grp[0-9]$':
+ type: object
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ Specifies the name(s) of one or more pins to be configured by
+ this node.
+ items:
+ enum: [ adcsync, bat_rm, bsc1_scl, bsc1_sda, bsc2_scl, bsc2_sda,
+ classgpwr, clk_cx8, clkout_0, clkout_1, clkout_2,
+ clkout_3, clkreq_in_0, clkreq_in_1, cws_sys_req1,
+ cws_sys_req2, cws_sys_req3, digmic1_clk, digmic1_dq,
+ digmic2_clk, digmic2_dq, gpen13, gpen14, gpen15, gpio00,
+ gpio01, gpio02, gpio03, gpio04, gpio05, gpio06, gpio07,
+ gpio08, gpio09, gpio10, gpio11, gpio12, gpio13, gpio14,
+ gps_pablank, gps_tmark, hdmi_scl, hdmi_sda, ic_dm, ic_dp,
+ kp_col_ip_0, kp_col_ip_1, kp_col_ip_2, kp_col_ip_3,
+ kp_row_op_0, kp_row_op_1, kp_row_op_2, kp_row_op_3,
+ lcd_b_0, lcd_b_1, lcd_b_2, lcd_b_3, lcd_b_4, lcd_b_5,
+ lcd_b_6, lcd_b_7, lcd_g_0, lcd_g_1, lcd_g_2, lcd_g_3,
+ lcd_g_4, lcd_g_5, lcd_g_6, lcd_g_7, lcd_hsync, lcd_oe,
+ lcd_pclk, lcd_r_0, lcd_r_1, lcd_r_2, lcd_r_3, lcd_r_4,
+ lcd_r_5, lcd_r_6, lcd_r_7, lcd_vsync, mdmgpio0, mdmgpio1,
+ mdmgpio2, mdmgpio3, mdmgpio4, mdmgpio5, mdmgpio6,
+ mdmgpio7, mdmgpio8, mphi_data_0, mphi_data_1, mphi_data_2,
+ mphi_data_3, mphi_data_4, mphi_data_5, mphi_data_6,
+ mphi_data_7, mphi_data_8, mphi_data_9, mphi_data_10,
+ mphi_data_11, mphi_data_12, mphi_data_13, mphi_data_14,
+ mphi_data_15, mphi_ha0, mphi_hat0, mphi_hat1, mphi_hce0_n,
+ mphi_hce1_n, mphi_hrd_n, mphi_hwr_n, mphi_run0, mphi_run1,
+ mtx_scan_clk, mtx_scan_data, nand_ad_0, nand_ad_1,
+ nand_ad_2, nand_ad_3, nand_ad_4, nand_ad_5, nand_ad_6,
+ nand_ad_7, nand_ale, nand_cen_0, nand_cen_1, nand_cle,
+ nand_oen, nand_rdy_0, nand_rdy_1, nand_wen, nand_wp, pc1,
+ pc2, pmu_int, pmu_scl, pmu_sda, rfst2g_mtsloten3g,
+ rgmii_0_rx_ctl, rgmii_0_rxc, rgmii_0_rxd_0, rgmii_0_rxd_1,
+ rgmii_0_rxd_2, rgmii_0_rxd_3, rgmii_0_tx_ctl, rgmii_0_txc,
+ rgmii_0_txd_0, rgmii_0_txd_1, rgmii_0_txd_2,
+ rgmii_0_txd_3, rgmii_1_rx_ctl, rgmii_1_rxc, rgmii_1_rxd_0,
+ rgmii_1_rxd_1, rgmii_1_rxd_2, rgmii_1_rxd_3,
+ rgmii_1_tx_ctl, rgmii_1_txc, rgmii_1_txd_0, rgmii_1_txd_1,
+ rgmii_1_txd_2, rgmii_1_txd_3, rgmii_gpio_0, rgmii_gpio_1,
+ rgmii_gpio_2, rgmii_gpio_3, rtxdata2g_txdata3g1,
+ rtxen2g_txdata3g2, rxdata3g0, rxdata3g1, rxdata3g2,
+ sdio1_clk, sdio1_cmd, sdio1_data_0, sdio1_data_1,
+ sdio1_data_2, sdio1_data_3, sdio4_clk, sdio4_cmd,
+ sdio4_data_0, sdio4_data_1, sdio4_data_2, sdio4_data_3,
+ sim_clk, sim_data, sim_det, sim_resetn, sim2_clk,
+ sim2_data, sim2_det, sim2_resetn, sri_c, sri_d, sri_e,
+ ssp_extclk, ssp0_clk, ssp0_fs, ssp0_rxd, ssp0_txd,
+ ssp2_clk, ssp2_fs_0, ssp2_fs_1, ssp2_fs_2, ssp2_fs_3,
+ ssp2_rxd_0, ssp2_rxd_1, ssp2_txd_0, ssp2_txd_1, ssp3_clk,
+ ssp3_fs, ssp3_rxd, ssp3_txd, ssp4_clk, ssp4_fs, ssp4_rxd,
+ ssp4_txd, ssp5_clk, ssp5_fs, ssp5_rxd, ssp5_txd, ssp6_clk,
+ ssp6_fs, ssp6_rxd, ssp6_txd, stat_1, stat_2, sysclken,
+ traceclk, tracedt00, tracedt01, tracedt02, tracedt03,
+ tracedt04, tracedt05, tracedt06, tracedt07, tracedt08
+ tracedt09, tracedt10, tracedt11, tracedt12, tracedt13
+ tracedt14, tracedt15, txdata3g0, txpwrind, uartb1_ucts,
+ uartb1_urts, uartb1_urxd, uartb1_utxd, uartb2_urxd,
+ uartb2_utxd, uartb3_ucts, uartb3_urts, uartb3_urxd,
+ uartb3_utxd, uartb4_ucts, uartb4_urts, uartb4_urxd,
+ uartb4_utxd, vc_cam1_scl, vc_cam1_sda, vc_cam2_scl,
+ vc_cam2_sda, vc_cam3_scl, vc_cam3_sda ]
+
+ function:
+ description:
+ Specifies the pin mux selection.
+ enum: [ alt1, alt2, alt3, alt4 ]
+
+ slew-rate:
+ description: |
+ Meaning depends on configured pin mux:
+ *_scl or *_sda:
+ 0: Standard (100 kbps) & Fast (400 kbps) mode
+ 1: Highspeed (3.4 Mbps) mode
+ ic_dm or ic_dp:
+ 0: normal slew rate
+ 1: fast slew rate
+ Otherwise:
+ 0: fast slew rate
+ 1: normal slew rate
+
+ bias-disable: true
+ input-disable: true
+ input-enable: true
+
+ required:
+ - pins
+
+ allOf:
+ - $ref: pincfg-node.yaml#
+
+ # Optional properties for standard pins
+ - if:
+ properties:
+ pins:
+ contains:
+ enum: [ adcsync, bat_rm, classgpwr, clk_cx8, clkout_0,
+ clkout_1, clkout_2, clkout_3, clkreq_in_0,
+ clkreq_in_1, cws_sys_req1, cws_sys_req2,
+ cws_sys_req3, digmic1_clk, digmic1_dq, digmic2_clk,
+ digmic2_dq, gpen13, gpen14, gpen15, gpio00, gpio01,
+ gpio02, gpio03, gpio04, gpio05, gpio06, gpio07,
+ gpio08, gpio09, gpio10, gpio11, gpio12, gpio13,
+ gpio14, gps_pablank, gps_tmark, ic_dm, ic_dp,
+ kp_col_ip_0, kp_col_ip_1, kp_col_ip_2, kp_col_ip_3,
+ kp_row_op_0, kp_row_op_1, kp_row_op_2, kp_row_op_3,
+ lcd_b_0, lcd_b_1, lcd_b_2, lcd_b_3, lcd_b_4, lcd_b_5,
+ lcd_b_6, lcd_b_7, lcd_g_0, lcd_g_1, lcd_g_2, lcd_g_3,
+ lcd_g_4, lcd_g_5, lcd_g_6, lcd_g_7, lcd_hsync,
+ lcd_oe, lcd_pclk, lcd_r_0, lcd_r_1, lcd_r_2,
+ lcd_r_3, lcd_r_4, lcd_r_5, lcd_r_6, lcd_r_7,
+ lcd_vsync, mdmgpio0, mdmgpio1, mdmgpio2, mdmgpio3,
+ mdmgpio4, mdmgpio5, mdmgpio6, mdmgpio7, mdmgpio8,
+ mphi_data_0, mphi_data_1, mphi_data_2, mphi_data_3,
+ mphi_data_4, mphi_data_5, mphi_data_6, mphi_data_7,
+ mphi_data_8, mphi_data_9, mphi_data_10,
+ mphi_data_11, mphi_data_12, mphi_data_13,
+ mphi_data_14, mphi_data_15, mphi_ha0, mphi_hat0,
+ mphi_hat1, mphi_hce0_n, mphi_hce1_n, mphi_hrd_n,
+ mphi_hwr_n, mphi_run0, mphi_run1, mtx_scan_clk,
+ mtx_scan_data, nand_ad_0, nand_ad_1, nand_ad_2,
+ nand_ad_3, nand_ad_4, nand_ad_5, nand_ad_6,
+ nand_ad_7, nand_ale, nand_cen_0, nand_cen_1,
+ nand_cle, nand_oen, nand_rdy_0, nand_rdy_1,
+ nand_wen, nand_wp, pc1, pc2, pmu_int,
+ rfst2g_mtsloten3g, rgmii_0_rx_ctl, rgmii_0_rxc,
+ rgmii_0_rxd_0, rgmii_0_rxd_1, rgmii_0_rxd_2,
+ rgmii_0_rxd_3, rgmii_0_tx_ctl, rgmii_0_txc,
+ rgmii_0_txd_0, rgmii_0_txd_1, rgmii_0_txd_2,
+ rgmii_0_txd_3, rgmii_1_rx_ctl, rgmii_1_rxc,
+ rgmii_1_rxd_0, rgmii_1_rxd_1, rgmii_1_rxd_2,
+ rgmii_1_rxd_3, rgmii_1_tx_ctl, rgmii_1_txc,
+ rgmii_1_txd_0, rgmii_1_txd_1, rgmii_1_txd_2,
+ rgmii_1_txd_3, rgmii_gpio_0, rgmii_gpio_1,
+ rgmii_gpio_2, rgmii_gpio_3, rtxdata2g_txdata3g1,
+ rtxen2g_txdata3g2, rxdata3g0, rxdata3g1, rxdata3g2,
+ sdio1_clk, sdio1_cmd, sdio1_data_0, sdio1_data_1,
+ sdio1_data_2, sdio1_data_3, sdio4_clk, sdio4_cmd,
+ sdio4_data_0, sdio4_data_1, sdio4_data_2,
+ sdio4_data_3, sim_clk, sim_data, sim_det,
+ sim_resetn, sim2_clk, sim2_data, sim2_det,
+ sim2_resetn, sri_c, sri_d, sri_e, ssp_extclk,
+ ssp0_clk, ssp0_fs, ssp0_rxd, ssp0_txd, ssp2_clk,
+ ssp2_fs_0, ssp2_fs_1, ssp2_fs_2, ssp2_fs_3,
+ ssp2_rxd_0, ssp2_rxd_1, ssp2_txd_0, ssp2_txd_1,
+ ssp3_clk, ssp3_fs, ssp3_rxd, ssp3_txd, ssp4_clk,
+ ssp4_fs, ssp4_rxd, ssp4_txd, ssp5_clk, ssp5_fs,
+ ssp5_rxd, ssp5_txd, ssp6_clk, ssp6_fs, ssp6_rxd,
+ ssp6_txd, stat_1, stat_2, sysclken, traceclk,
+ tracedt00, tracedt01, tracedt02, tracedt03,
+ tracedt04, tracedt05, tracedt06, tracedt07,
+ tracedt08, tracedt09, tracedt10, tracedt11,
+ tracedt12, tracedt13, tracedt14, tracedt15,
+ txdata3g0, txpwrind, uartb1_ucts, uartb1_urts,
+ uartb1_urxd, uartb1_utxd, uartb2_urxd, uartb2_utxd,
+ uartb3_ucts, uartb3_urts, uartb3_urxd, uartb3_utxd,
+ uartb4_ucts, uartb4_urts, uartb4_urxd, uartb4_utxd ]
+ then:
+ properties:
+ drive-strength:
+ enum: [ 2, 4, 6, 8, 10, 12, 14, 16 ]
+
+ bias-disable: true
+ bias-pull-up: true
+ bias-pull-down: true
+ input-schmitt-enable: true
+ input-schmitt-disable: true
+
+ # Optional properties for I2C pins
+ - if:
+ properties:
+ pins:
+ contains:
+ enum: [ bsc1_scl, bsc1_sda, bsc2_scl, bsc2_sda, pmu_scl,
+ pmu_sda, vc_cam1_scl, vc_cam1_sda, vc_cam2_scl,
+ vc_cam2_sda, vc_cam3_scl, vc_cam3_sda ]
+ then:
+ properties:
+ bias-pull-up:
+ description:
+ There are 3 pull-up resistors (1.2k, 1.8k, 2.7k) available
+ in parallel for I2C pins.
+ enum: [ 568, 720, 831, 1080, 1200, 1800, 2700 ]
+
+ bias-disable: true
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ pinctrl@35004800 {
+ compatible = "brcm,bcm11351-pinctrl";
+ reg = <0x35004800 0x430>;
+
+ dev-a-active-pins {
+ /* group node defining 1 standard pin */
+ std-grp0 {
+ pins = "gpio00";
+ function = "alt1";
+ input-schmitt-enable;
+ bias-disable;
+ slew-rate = <1>;
+ drive-strength = <4>;
+ };
+
+ /* group node defining 2 I2C pins */
+ i2c-grp0 {
+ pins = "bsc1_scl", "bsc1_sda";
+ function = "alt2";
+ bias-pull-up = <720>;
+ input-enable;
+ };
+
+ /* group node defining 2 HDMI pins */
+ hdmi-grp0 {
+ pins = "hdmi_scl", "hdmi_sda";
+ function = "alt3";
+ slew-rate = <1>;
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
new file mode 100644
index 0000000000..5682b2010e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
@@ -0,0 +1,99 @@
+Broadcom BCM2835 GPIO (and pinmux) controller
+
+The BCM2835 GPIO module is a combined GPIO controller, (GPIO) interrupt
+controller, and pinmux/control device.
+
+Required properties:
+- compatible: "brcm,bcm2835-gpio"
+- compatible: should be one of:
+ "brcm,bcm2835-gpio" - BCM2835 compatible pinctrl
+ "brcm,bcm7211-gpio" - BCM7211 compatible pinctrl
+ "brcm,bcm2711-gpio" - BCM2711 compatible pinctrl
+ "brcm,bcm7211-gpio" - BCM7211 compatible pinctrl
+- reg: Should contain the physical address of the GPIO module's registers.
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells : Should be two. The first cell is the pin number and the
+ second cell is used to specify optional parameters:
+ - bit 0 specifies polarity (0 for normal, 1 for inverted)
+- interrupts : The interrupt outputs from the controller. One interrupt per
+ individual bank followed by the "all banks" interrupt. For BCM7211, an
+ additional set of per-bank interrupt line and an "all banks" wake-up
+ interrupt may be specified.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells : Should be 2.
+ The first cell is the GPIO number.
+ The second cell is used to specify flags:
+ bits[3:0] trigger type and level flags:
+ 1 = low-to-high edge triggered.
+ 2 = high-to-low edge triggered.
+ 4 = active high level-sensitive.
+ 8 = active low level-sensitive.
+ Valid combinations are 1, 2, 3, 4, 8.
+
+Please refer to ../gpio/gpio.txt for a general description of GPIO bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Each pin configuration node lists the pin(s) to which it applies, and one or
+more of the mux function to select on those pin(s), and pull-up/down
+configuration. Each subnode only affects those parameters that are explicitly
+listed. In other words, a subnode that lists only a mux function implies no
+information about any pull configuration. Similarly, a subnode that lists only
+a pul parameter implies no information about the mux function.
+
+The BCM2835 pin configuration and multiplexing supports the generic bindings.
+For details on each properties, you can refer to ./pinctrl-bindings.txt.
+
+Required sub-node properties:
+ - pins
+ - function
+
+Optional sub-node properties:
+ - bias-disable
+ - bias-pull-up
+ - bias-pull-down
+ - output-high
+ - output-low
+
+Legacy pin configuration and multiplexing binding:
+*** (Its use is deprecated, use generic multiplexing and configuration
+bindings instead)
+
+Required subnode-properties:
+- brcm,pins: An array of cells. Each cell contains the ID of a pin. Valid IDs
+ are the integer GPIO IDs; 0==GPIO0, 1==GPIO1, ... 53==GPIO53.
+
+Optional subnode-properties:
+- brcm,function: Integer, containing the function to mux to the pin(s):
+ 0: GPIO in
+ 1: GPIO out
+ 2: alt5
+ 3: alt4
+ 4: alt0
+ 5: alt1
+ 6: alt2
+ 7: alt3
+- brcm,pull: Integer, representing the pull-down/up to apply to the pin(s):
+ 0: none
+ 1: down
+ 2: up
+
+Each of brcm,function and brcm,pull may contain either a single value which
+will be applied to all pins in brcm,pins, or 1 value for each entry in
+brcm,pins.
+
+Example:
+
+ gpio: gpio {
+ compatible = "brcm,bcm2835-gpio";
+ reg = <0x2200000 0xb4>;
+ interrupts = <2 17>, <2 19>, <2 18>, <2 20>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm4908-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm4908-pinctrl.yaml
new file mode 100644
index 0000000000..8a9fb9b433
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm4908-pinctrl.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm4908-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM4908 pin controller
+
+maintainers:
+ - Rafał Miłecki <rafal@milecki.pl>
+
+description:
+ Binding for pin controller present on BCM4908 family SoCs.
+
+properties:
+ compatible:
+ const: brcm,bcm4908-pinctrl
+
+ reg:
+ maxItems: 1
+
+patternProperties:
+ '-pins$':
+ type: object
+ $ref: pinmux-node.yaml#
+ additionalProperties: false
+
+ properties:
+ function:
+ enum: [ led_0, led_1, led_2, led_3, led_4, led_5, led_6, led_7, led_8,
+ led_9, led_10, led_11, led_12, led_13, led_14, led_15, led_16,
+ led_17, led_18, led_19, led_20, led_21, led_22, led_23, led_24,
+ led_25, led_26, led_27, led_28, led_29, led_30, led_31,
+ hs_uart, i2c, i2s, nand_ctrl, nand_data, emmc_ctrl, usb0_pwr,
+ usb1_pwr ]
+
+ groups:
+ minItems: 1
+ maxItems: 2
+ items:
+ enum: [ led_0_grp_a, led_1_grp_a, led_2_grp_a, led_3_grp_a,
+ led_4_grp_a, led_5_grp_a, led_6_grp_a, led_7_grp_a,
+ led_8_grp_a, led_9_grp_a, led_10_grp_a, led_10_grp_b,
+ led_11_grp_a, led_11_grp_b, led_12_grp_a, led_12_grp_b,
+ led_13_grp_a, led_13_grp_b, led_14_grp_a, led_15_grp_a,
+ led_16_grp_a, led_17_grp_a, led_18_grp_a, led_19_grp_a,
+ led_20_grp_a, led_21_grp_a, led_22_grp_a, led_23_grp_a,
+ led_24_grp_a, led_25_grp_a, led_26_grp_a, led_27_grp_a,
+ led_28_grp_a, led_29_grp_a, led_30_grp_a, led_31_grp_a,
+ led_31_grp_b, hs_uart_grp, i2c_grp_a, i2c_grp_b, i2s_grp,
+ nand_ctrl_grp, nand_data_grp, emmc_ctrl_grp, usb0_pwr_grp,
+ usb1_pwr_grp ]
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ pinctrl@ff800560 {
+ compatible = "brcm,bcm4908-pinctrl";
+ reg = <0xff800560 0x10>;
+
+ led_0-a-pins {
+ function = "led_0";
+ groups = "led_0_grp_a";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
new file mode 100644
index 0000000000..4478a76171
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6318-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6318 pin controller
+
+maintainers:
+ - Álvaro Fernández Rojas <noltari@gmail.com>
+ - Jonas Gorski <jonas.gorski@gmail.com>
+
+description:
+ Bindings for Broadcom's BCM6318 memory-mapped pin controller.
+
+properties:
+ compatible:
+ const: brcm,bcm6318-pinctrl
+
+ reg:
+ maxItems: 2
+
+patternProperties:
+ '-pins$':
+ type: object
+ $ref: pinmux-node.yaml#
+
+ properties:
+ function:
+ enum: [ ephy0_spd_led, ephy1_spd_led, ephy2_spd_led, ephy3_spd_led,
+ ephy0_act_led, ephy1_act_led, ephy2_act_led, ephy3_act_led,
+ serial_led_data, serial_led_clk, inet_act_led, inet_fail_led,
+ dsl_led, post_fail_led, wlan_wps_led, usb_pwron,
+ usb_device_led, usb_active ]
+
+ pins:
+ enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7,
+ gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio40 ]
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ pinctrl@18 {
+ compatible = "brcm,bcm6318-pinctrl";
+ reg = <0x18 0x10>, <0x54 0x18>;
+
+ pinctrl_ephy0_spd_led: ephy0_spd_led-pins {
+ function = "ephy0_spd_led";
+ pins = "gpio0";
+ };
+
+ pinctrl_ephy1_spd_led: ephy1_spd_led-pins {
+ function = "ephy1_spd_led";
+ pins = "gpio1";
+ };
+
+ pinctrl_ephy2_spd_led: ephy2_spd_led-pins {
+ function = "ephy2_spd_led";
+ pins = "gpio2";
+ };
+
+ pinctrl_ephy3_spd_led: ephy3_spd_led-pins {
+ function = "ephy3_spd_led";
+ pins = "gpio3";
+ };
+
+ pinctrl_ephy0_act_led: ephy0_act_led-pins {
+ function = "ephy0_act_led";
+ pins = "gpio4";
+ };
+
+ pinctrl_ephy1_act_led: ephy1_act_led-pins {
+ function = "ephy1_act_led";
+ pins = "gpio5";
+ };
+
+ pinctrl_ephy2_act_led: ephy2_act_led-pins {
+ function = "ephy2_act_led";
+ pins = "gpio6";
+ };
+
+ pinctrl_ephy3_act_led: ephy3_act_led-pins {
+ function = "ephy3_act_led";
+ pins = "gpio7";
+ };
+
+ pinctrl_serial_led: serial_led-pins {
+ pinctrl_serial_led_data: serial_led_data-pins {
+ function = "serial_led_data";
+ pins = "gpio6";
+ };
+
+ pinctrl_serial_led_clk: serial_led_clk-pins {
+ function = "serial_led_clk";
+ pins = "gpio7";
+ };
+ };
+
+ pinctrl_inet_act_led: inet_act_led-pins {
+ function = "inet_act_led";
+ pins = "gpio8";
+ };
+
+ pinctrl_inet_fail_led: inet_fail_led-pins {
+ function = "inet_fail_led";
+ pins = "gpio9";
+ };
+
+ pinctrl_dsl_led: dsl_led-pins {
+ function = "dsl_led";
+ pins = "gpio10";
+ };
+
+ pinctrl_post_fail_led: post_fail_led-pins {
+ function = "post_fail_led";
+ pins = "gpio11";
+ };
+
+ pinctrl_wlan_wps_led: wlan_wps_led-pins {
+ function = "wlan_wps_led";
+ pins = "gpio12";
+ };
+
+ pinctrl_usb_pwron: usb_pwron-pins {
+ function = "usb_pwron";
+ pins = "gpio13";
+ };
+
+ pinctrl_usb_device_led: usb_device_led-pins {
+ function = "usb_device_led";
+ pins = "gpio13";
+ };
+
+ pinctrl_usb_active: usb_active-pins {
+ function = "usb_active";
+ pins = "gpio40";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml
new file mode 100644
index 0000000000..73e1caa7c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml
@@ -0,0 +1,167 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm63268-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM63268 pin controller
+
+maintainers:
+ - Álvaro Fernández Rojas <noltari@gmail.com>
+ - Jonas Gorski <jonas.gorski@gmail.com>
+
+description:
+ Bindings for Broadcom's BCM63268 memory-mapped pin controller.
+
+properties:
+ compatible:
+ const: brcm,bcm63268-pinctrl
+
+ reg:
+ maxItems: 3
+
+patternProperties:
+ '-pins$':
+ type: object
+ $ref: pinmux-node.yaml#
+
+ properties:
+ function:
+ enum: [ serial_led_clk, serial_led_data, hsspi_cs4, hsspi_cs5,
+ hsspi_cs6, hsspi_cs7, adsl_spi_miso, adsl_spi_mosi,
+ vreq_clk, pcie_clkreq_b, robosw_led_clk, robosw_led_data,
+ nand, gpio35_alt, dectpd, vdsl_phy_override_0,
+ vdsl_phy_override_1, vdsl_phy_override_2,
+ vdsl_phy_override_3, dsl_gpio8, dsl_gpio9 ]
+
+ pins:
+ enum: [ gpio0, gpio1, gpio16, gpio17, gpio8, gpio9, gpio18, gpio19,
+ gpio22, gpio23, gpio30, gpio31, nand_grp, gpio35
+ dectpd_grp, vdsl_phy_override_0_grp,
+ vdsl_phy_override_1_grp, vdsl_phy_override_2_grp,
+ vdsl_phy_override_3_grp, dsl_gpio8, dsl_gpio9 ]
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ pinctrl@10 {
+ compatible = "brcm,bcm63268-pinctrl";
+ reg = <0x10 0x4>, <0x18 0x8>, <0x38 0x4>;
+
+ pinctrl_serial_led: serial_led-pins {
+ pinctrl_serial_led_clk: serial_led_clk-pins {
+ function = "serial_led_clk";
+ pins = "gpio0";
+ };
+
+ pinctrl_serial_led_data: serial_led_data-pins {
+ function = "serial_led_data";
+ pins = "gpio1";
+ };
+ };
+
+ pinctrl_hsspi_cs4: hsspi_cs4-pins {
+ function = "hsspi_cs4";
+ pins = "gpio16";
+ };
+
+ pinctrl_hsspi_cs5: hsspi_cs5-pins {
+ function = "hsspi_cs5";
+ pins = "gpio17";
+ };
+
+ pinctrl_hsspi_cs6: hsspi_cs6-pins {
+ function = "hsspi_cs6";
+ pins = "gpio8";
+ };
+
+ pinctrl_hsspi_cs7: hsspi_cs7-pins {
+ function = "hsspi_cs7";
+ pins = "gpio9";
+ };
+
+ pinctrl_adsl_spi: adsl_spi-pins {
+ pinctrl_adsl_spi_miso: adsl_spi_miso-pins {
+ function = "adsl_spi_miso";
+ pins = "gpio18";
+ };
+
+ pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins {
+ function = "adsl_spi_mosi";
+ pins = "gpio19";
+ };
+ };
+
+ pinctrl_vreq_clk: vreq_clk-pins {
+ function = "vreq_clk";
+ pins = "gpio22";
+ };
+
+ pinctrl_pcie_clkreq_b: pcie_clkreq_b-pins {
+ function = "pcie_clkreq_b";
+ pins = "gpio23";
+ };
+
+ pinctrl_robosw_led_clk: robosw_led_clk-pins {
+ function = "robosw_led_clk";
+ pins = "gpio30";
+ };
+
+ pinctrl_robosw_led_data: robosw_led_data-pins {
+ function = "robosw_led_data";
+ pins = "gpio31";
+ };
+
+ pinctrl_nand: nand-pins {
+ function = "nand";
+ group = "nand_grp";
+ };
+
+ pinctrl_gpio35_alt: gpio35_alt-pins {
+ function = "gpio35_alt";
+ pin = "gpio35";
+ };
+
+ pinctrl_dectpd: dectpd-pins {
+ function = "dectpd";
+ group = "dectpd_grp";
+ };
+
+ pinctrl_vdsl_phy_override_0: vdsl_phy_override_0-pins {
+ function = "vdsl_phy_override_0";
+ group = "vdsl_phy_override_0_grp";
+ };
+
+ pinctrl_vdsl_phy_override_1: vdsl_phy_override_1-pins {
+ function = "vdsl_phy_override_1";
+ group = "vdsl_phy_override_1_grp";
+ };
+
+ pinctrl_vdsl_phy_override_2: vdsl_phy_override_2-pins {
+ function = "vdsl_phy_override_2";
+ group = "vdsl_phy_override_2_grp";
+ };
+
+ pinctrl_vdsl_phy_override_3: vdsl_phy_override_3-pins {
+ function = "vdsl_phy_override_3";
+ group = "vdsl_phy_override_3_grp";
+ };
+
+ pinctrl_dsl_gpio8: dsl_gpio8-pins {
+ function = "dsl_gpio8";
+ group = "dsl_gpio8";
+ };
+
+ pinctrl_dsl_gpio9: dsl_gpio9-pins {
+ function = "dsl_gpio9";
+ group = "dsl_gpio9";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
new file mode 100644
index 0000000000..2750ba42ae
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6328-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6328 pin controller
+
+maintainers:
+ - Álvaro Fernández Rojas <noltari@gmail.com>
+ - Jonas Gorski <jonas.gorski@gmail.com>
+
+description:
+ Bindings for Broadcom's BCM6328 memory-mapped pin controller.
+
+properties:
+ compatible:
+ const: brcm,bcm6328-pinctrl
+
+ reg:
+ maxItems: 1
+
+patternProperties:
+ '-pins$':
+ type: object
+ $ref: pinmux-node.yaml#
+
+ properties:
+ function:
+ enum: [ serial_led_data, serial_led_clk, inet_act_led, pcie_clkreq,
+ led, ephy0_act_led, ephy1_act_led, ephy2_act_led,
+ ephy3_act_led, hsspi_cs1, usb_device_port, usb_host_port ]
+
+ pins:
+ enum: [ gpio6, gpio7, gpio11, gpio16, gpio17, gpio18, gpio19,
+ gpio20, gpio25, gpio26, gpio27, gpio28, hsspi_cs1,
+ usb_port1 ]
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ pinctrl@18 {
+ compatible = "brcm,bcm6328-pinctrl";
+ reg = <0x18 0x10>;
+
+ pinctrl_serial_led: serial_led-pins {
+ pinctrl_serial_led_data: serial_led_data-pins {
+ function = "serial_led_data";
+ pins = "gpio6";
+ };
+
+ pinctrl_serial_led_clk: serial_led_clk-pins {
+ function = "serial_led_clk";
+ pins = "gpio7";
+ };
+ };
+
+ pinctrl_inet_act_led: inet_act_led-pins {
+ function = "inet_act_led";
+ pins = "gpio11";
+ };
+
+ pinctrl_pcie_clkreq: pcie_clkreq-pins {
+ function = "pcie_clkreq";
+ pins = "gpio16";
+ };
+
+ pinctrl_ephy0_spd_led: ephy0_spd_led-pins {
+ function = "led";
+ pins = "gpio17";
+ };
+
+ pinctrl_ephy1_spd_led: ephy1_spd_led-pins {
+ function = "led";
+ pins = "gpio18";
+ };
+
+ pinctrl_ephy2_spd_led: ephy2_spd_led-pins {
+ function = "led";
+ pins = "gpio19";
+ };
+
+ pinctrl_ephy3_spd_led: ephy3_spd_led-pins {
+ function = "led";
+ pins = "gpio20";
+ };
+
+ pinctrl_ephy0_act_led: ephy0_act_led-pins {
+ function = "ephy0_act_led";
+ pins = "gpio25";
+ };
+
+ pinctrl_ephy1_act_led: ephy1_act_led-pins {
+ function = "ephy1_act_led";
+ pins = "gpio26";
+ };
+
+ pinctrl_ephy2_act_led: ephy2_act_led-pins {
+ function = "ephy2_act_led";
+ pins = "gpio27";
+ };
+
+ pinctrl_ephy3_act_led: ephy3_act_led-pins {
+ function = "ephy3_act_led";
+ pins = "gpio28";
+ };
+
+ pinctrl_hsspi_cs1: hsspi_cs1-pins {
+ function = "hsspi_cs1";
+ pins = "hsspi_cs1";
+ };
+
+ pinctrl_usb_port1_device: usb_port1_device-pins {
+ function = "usb_device_port";
+ pins = "usb_port1";
+ };
+
+ pinctrl_usb_port1_host: usb_port1_host-pins {
+ function = "usb_host_port";
+ pins = "usb_port1";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml
new file mode 100644
index 0000000000..2f6c540498
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6358-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6358 pin controller
+
+maintainers:
+ - Álvaro Fernández Rojas <noltari@gmail.com>
+ - Jonas Gorski <jonas.gorski@gmail.com>
+
+description:
+ Bindings for Broadcom's BCM6358 memory-mapped pin controller.
+
+properties:
+ compatible:
+ const: brcm,bcm6358-pinctrl
+
+ reg:
+ maxItems: 1
+
+patternProperties:
+ '-pins$':
+ type: object
+ $ref: pinmux-node.yaml#
+
+ properties:
+ function:
+ enum: [ ebi_cs, uart1, serial_led, legacy_led, led, spi_cs, utopia,
+ pwm_syn_clk, sys_irq ]
+
+ pins:
+ enum: [ ebi_cs_grp, uart1_grp, serial_led_grp, legacy_led_grp,
+ led_grp, spi_cs_grp, utopia_grp, pwm_syn_clk, sys_irq_grp ]
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ pinctrl@18 {
+ compatible = "brcm,bcm6358-pinctrl";
+ reg = <0x18 0x4>;
+
+ pinctrl_ebi_cs: ebi_cs-pins {
+ function = "ebi_cs";
+ groups = "ebi_cs_grp";
+ };
+
+ pinctrl_uart1: uart1-pins {
+ function = "uart1";
+ groups = "uart1_grp";
+ };
+
+ pinctrl_serial_led: serial_led-pins {
+ function = "serial_led";
+ groups = "serial_led_grp";
+ };
+
+ pinctrl_legacy_led: legacy_led-pins {
+ function = "legacy_led";
+ groups = "legacy_led_grp";
+ };
+
+ pinctrl_led: led-pins {
+ function = "led";
+ groups = "led_grp";
+ };
+
+ pinctrl_spi_cs_23: spi_cs-pins {
+ function = "spi_cs";
+ groups = "spi_cs_grp";
+ };
+
+ pinctrl_utopia: utopia-pins {
+ function = "utopia";
+ groups = "utopia_grp";
+ };
+
+ pinctrl_pwm_syn_clk: pwm_syn_clk-pins {
+ function = "pwm_syn_clk";
+ groups = "pwm_syn_clk_grp";
+ };
+
+ pinctrl_sys_irq: sys_irq-pins {
+ function = "sys_irq";
+ groups = "sys_irq_grp";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml
new file mode 100644
index 0000000000..b3044f8057
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml
@@ -0,0 +1,209 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6362-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6362 pin controller
+
+maintainers:
+ - Álvaro Fernández Rojas <noltari@gmail.com>
+ - Jonas Gorski <jonas.gorski@gmail.com>
+
+description:
+ Bindings for Broadcom's BCM6362 memory-mapped pin controller.
+
+properties:
+ compatible:
+ const: brcm,bcm6362-pinctrl
+
+ reg:
+ maxItems: 2
+
+patternProperties:
+ '-pins$':
+ type: object
+ $ref: pinmux-node.yaml#
+
+ properties:
+ function:
+ enum: [ usb_device_led, sys_irq, serial_led_clk, serial_led_data,
+ robosw_led_data, robosw_led_clk, robosw_led0, robosw_led1,
+ inet_led, spi_cs2, spi_cs3, ntr_pulse, uart1_scts,
+ uart1_srts, uart1_sdin, uart1_sdout, adsl_spi_miso,
+ adsl_spi_mosi, adsl_spi_clk, adsl_spi_cs, ephy0_led,
+ ephy1_led, ephy2_led, ephy3_led, ext_irq0, ext_irq1,
+ ext_irq2, ext_irq3, nand ]
+
+ pins:
+ enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7,
+ gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio14,
+ gpio15, gpio16, gpio17, gpio18, gpio19, gpio20, gpio21,
+ gpio22, gpio23, gpio24, gpio25, gpio26, gpio27, nand_grp ]
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ pinctrl@18 {
+ compatible = "brcm,bcm6362-pinctrl";
+ reg = <0x18 0x10>, <0x38 0x4>;
+
+ pinctrl_usb_device_led: usb_device_led-pins {
+ function = "usb_device_led";
+ pins = "gpio0";
+ };
+
+ pinctrl_sys_irq: sys_irq-pins {
+ function = "sys_irq";
+ pins = "gpio1";
+ };
+
+ pinctrl_serial_led: serial_led-pins {
+ pinctrl_serial_led_clk: serial_led_clk-pins {
+ function = "serial_led_clk";
+ pins = "gpio2";
+ };
+
+ pinctrl_serial_led_data: serial_led_data-pins {
+ function = "serial_led_data";
+ pins = "gpio3";
+ };
+ };
+
+ pinctrl_robosw_led_data: robosw_led_data-pins {
+ function = "robosw_led_data";
+ pins = "gpio4";
+ };
+
+ pinctrl_robosw_led_clk: robosw_led_clk-pins {
+ function = "robosw_led_clk";
+ pins = "gpio5";
+ };
+
+ pinctrl_robosw_led0: robosw_led0-pins {
+ function = "robosw_led0";
+ pins = "gpio6";
+ };
+
+ pinctrl_robosw_led1: robosw_led1-pins {
+ function = "robosw_led1";
+ pins = "gpio7";
+ };
+
+ pinctrl_inet_led: inet_led-pins {
+ function = "inet_led";
+ pins = "gpio8";
+ };
+
+ pinctrl_spi_cs2: spi_cs2-pins {
+ function = "spi_cs2";
+ pins = "gpio9";
+ };
+
+ pinctrl_spi_cs3: spi_cs3-pins {
+ function = "spi_cs3";
+ pins = "gpio10";
+ };
+
+ pinctrl_ntr_pulse: ntr_pulse-pins {
+ function = "ntr_pulse";
+ pins = "gpio11";
+ };
+
+ pinctrl_uart1_scts: uart1_scts-pins {
+ function = "uart1_scts";
+ pins = "gpio12";
+ };
+
+ pinctrl_uart1_srts: uart1_srts-pins {
+ function = "uart1_srts";
+ pins = "gpio13";
+ };
+
+ pinctrl_uart1: uart1-pins {
+ pinctrl_uart1_sdin: uart1_sdin-pins {
+ function = "uart1_sdin";
+ pins = "gpio14";
+ };
+
+ pinctrl_uart1_sdout: uart1_sdout-pins {
+ function = "uart1_sdout";
+ pins = "gpio15";
+ };
+ };
+
+ pinctrl_adsl_spi: adsl_spi-pins {
+ pinctrl_adsl_spi_miso: adsl_spi_miso-pins {
+ function = "adsl_spi_miso";
+ pins = "gpio16";
+ };
+
+ pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins {
+ function = "adsl_spi_mosi";
+ pins = "gpio17";
+ };
+
+ pinctrl_adsl_spi_clk: adsl_spi_clk-pins {
+ function = "adsl_spi_clk";
+ pins = "gpio18";
+ };
+
+ pinctrl_adsl_spi_cs: adsl_spi_cs-pins {
+ function = "adsl_spi_cs";
+ pins = "gpio19";
+ };
+ };
+
+ pinctrl_ephy0_led: ephy0_led-pins {
+ function = "ephy0_led";
+ pins = "gpio20";
+ };
+
+ pinctrl_ephy1_led: ephy1_led-pins {
+ function = "ephy1_led";
+ pins = "gpio21";
+ };
+
+ pinctrl_ephy2_led: ephy2_led-pins {
+ function = "ephy2_led";
+ pins = "gpio22";
+ };
+
+ pinctrl_ephy3_led: ephy3_led-pins {
+ function = "ephy3_led";
+ pins = "gpio23";
+ };
+
+ pinctrl_ext_irq0: ext_irq0-pins {
+ function = "ext_irq0";
+ pins = "gpio24";
+ };
+
+ pinctrl_ext_irq1: ext_irq1-pins {
+ function = "ext_irq1";
+ pins = "gpio25";
+ };
+
+ pinctrl_ext_irq2: ext_irq2-pins {
+ function = "ext_irq2";
+ pins = "gpio26";
+ };
+
+ pinctrl_ext_irq3: ext_irq3-pins {
+ function = "ext_irq3";
+ pins = "gpio27";
+ };
+
+ pinctrl_nand: nand-pins {
+ function = "nand";
+ group = "nand_grp";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml
new file mode 100644
index 0000000000..3236871827
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml
@@ -0,0 +1,220 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6368-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6368 pin controller
+
+maintainers:
+ - Álvaro Fernández Rojas <noltari@gmail.com>
+ - Jonas Gorski <jonas.gorski@gmail.com>
+
+description:
+ Bindings for Broadcom's BCM6368 memory-mapped pin controller.
+
+properties:
+ compatible:
+ const: brcm,bcm6368-pinctrl
+
+ reg:
+ maxItems: 2
+
+patternProperties:
+ '-pins$':
+ type: object
+ $ref: pinmux-node.yaml#
+
+ properties:
+ function:
+ enum: [ analog_afe_0, analog_afe_1, sys_irq, serial_led_data,
+ serial_led_clk, inet_led, ephy0_led, ephy1_led, ephy2_led,
+ ephy3_led, robosw_led_data, robosw_led_clk, robosw_led0,
+ robosw_led1, usb_device_led, pci_req1, pci_gnt1, pci_intb,
+ pci_req0, pci_gnt0, pcmcia_cd1, pcmcia_cd2, pcmcia_vs1,
+ pcmcia_vs2, ebi_cs2, ebi_cs3, spi_cs2, spi_cs3, spi_cs4,
+ spi_cs5, uart1 ]
+
+ pins:
+ enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7,
+ gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio14,
+ gpio16, gpio17, gpio18, gpio19, gpio20, gpio22, gpio23,
+ gpio24, gpio25, gpio26, gpio27, gpio28, gpio29, gpio30,
+ gpio31, uart1_grp ]
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ pinctrl@18 {
+ compatible = "brcm,bcm6368-pinctrl";
+ reg = <0x18 0x4>, <0x38 0x4>;
+
+ pinctrl_analog_afe_0: analog_afe_0-pins {
+ function = "analog_afe_0";
+ pins = "gpio0";
+ };
+
+ pinctrl_analog_afe_1: analog_afe_1-pins {
+ function = "analog_afe_1";
+ pins = "gpio1";
+ };
+
+ pinctrl_sys_irq: sys_irq-pins {
+ function = "sys_irq";
+ pins = "gpio2";
+ };
+
+ pinctrl_serial_led: serial_led-pins {
+ pinctrl_serial_led_data: serial_led_data-pins {
+ function = "serial_led_data";
+ pins = "gpio3";
+ };
+
+ pinctrl_serial_led_clk: serial_led_clk-pins {
+ function = "serial_led_clk";
+ pins = "gpio4";
+ };
+ };
+
+ pinctrl_inet_led: inet_led-pins {
+ function = "inet_led";
+ pins = "gpio5";
+ };
+
+ pinctrl_ephy0_led: ephy0_led-pins {
+ function = "ephy0_led";
+ pins = "gpio6";
+ };
+
+ pinctrl_ephy1_led: ephy1_led-pins {
+ function = "ephy1_led";
+ pins = "gpio7";
+ };
+
+ pinctrl_ephy2_led: ephy2_led-pins {
+ function = "ephy2_led";
+ pins = "gpio8";
+ };
+
+ pinctrl_ephy3_led: ephy3_led-pins {
+ function = "ephy3_led";
+ pins = "gpio9";
+ };
+
+ pinctrl_robosw_led_data: robosw_led_data-pins {
+ function = "robosw_led_data";
+ pins = "gpio10";
+ };
+
+ pinctrl_robosw_led_clk: robosw_led_clk-pins {
+ function = "robosw_led_clk";
+ pins = "gpio11";
+ };
+
+ pinctrl_robosw_led0: robosw_led0-pins {
+ function = "robosw_led0";
+ pins = "gpio12";
+ };
+
+ pinctrl_robosw_led1: robosw_led1-pins {
+ function = "robosw_led1";
+ pins = "gpio13";
+ };
+
+ pinctrl_usb_device_led: usb_device_led-pins {
+ function = "usb_device_led";
+ pins = "gpio14";
+ };
+
+ pinctrl_pci: pci-pins {
+ pinctrl_pci_req1: pci_req1-pins {
+ function = "pci_req1";
+ pins = "gpio16";
+ };
+
+ pinctrl_pci_gnt1: pci_gnt1-pins {
+ function = "pci_gnt1";
+ pins = "gpio17";
+ };
+
+ pinctrl_pci_intb: pci_intb-pins {
+ function = "pci_intb";
+ pins = "gpio18";
+ };
+
+ pinctrl_pci_req0: pci_req0-pins {
+ function = "pci_req0";
+ pins = "gpio19";
+ };
+
+ pinctrl_pci_gnt0: pci_gnt0-pins {
+ function = "pci_gnt0";
+ pins = "gpio20";
+ };
+ };
+
+ pinctrl_pcmcia: pcmcia-pins {
+ pinctrl_pcmcia_cd1: pcmcia_cd1-pins {
+ function = "pcmcia_cd1";
+ pins = "gpio22";
+ };
+
+ pinctrl_pcmcia_cd2: pcmcia_cd2-pins {
+ function = "pcmcia_cd2";
+ pins = "gpio23";
+ };
+
+ pinctrl_pcmcia_vs1: pcmcia_vs1-pins {
+ function = "pcmcia_vs1";
+ pins = "gpio24";
+ };
+
+ pinctrl_pcmcia_vs2: pcmcia_vs2-pins {
+ function = "pcmcia_vs2";
+ pins = "gpio25";
+ };
+ };
+
+ pinctrl_ebi_cs2: ebi_cs2-pins {
+ function = "ebi_cs2";
+ pins = "gpio26";
+ };
+
+ pinctrl_ebi_cs3: ebi_cs3-pins {
+ function = "ebi_cs3";
+ pins = "gpio27";
+ };
+
+ pinctrl_spi_cs2: spi_cs2-pins {
+ function = "spi_cs2";
+ pins = "gpio28";
+ };
+
+ pinctrl_spi_cs3: spi_cs3-pins {
+ function = "spi_cs3";
+ pins = "gpio29";
+ };
+
+ pinctrl_spi_cs4: spi_cs4-pins {
+ function = "spi_cs4";
+ pins = "gpio30";
+ };
+
+ pinctrl_spi_cs5: spi_cs5-pins {
+ function = "spi_cs5";
+ pins = "gpio31";
+ };
+
+ pinctrl_uart1: uart1-pins {
+ function = "uart1";
+ group = "uart1_grp";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinmux.txt
new file mode 100644
index 0000000000..3914529a32
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-pinmux.txt
@@ -0,0 +1,132 @@
+Broadcom Cygnus IOMUX Controller
+
+The Cygnus IOMUX controller supports group based mux configuration. In
+addition, certain pins can be muxed to GPIO function individually.
+
+Required properties:
+
+- compatible:
+ Must be "brcm,cygnus-pinmux"
+
+- reg:
+ Define the base and range of the I/O address space that contains the Cygnus
+IOMUX registers
+
+Properties in subnodes:
+
+- function:
+ The mux function to select
+
+- groups:
+ The list of groups to select with a given function
+
+For more details, refer to
+Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+For example:
+
+ pinmux: pinmux@0301d0c8 {
+ compatible = "brcm,cygnus-pinmux";
+ reg = <0x0301d0c8 0x1b0>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_default>;
+
+ i2s0_default: i2s0_default {
+ mux {
+ function = "i2s0";
+ groups = "i2s0_0_grp", "i2s0_1_grp";
+ };
+ };
+ };
+
+List of supported functions and groups in Cygnus:
+
+"i2s0": "i2s0_0_grp", "i2s0_1_grp"
+
+"i2s1": "i2s1_0_grp", "i2s1_1_grp"
+
+"i2s2": "i2s2_0_grp", "i2s2_1_grp", "i2s2_2_grp", "i2s2_3_grp", "i2s2_4_grp"
+
+"spdif": "spdif_grp"
+
+"pwm0": "pwm0_grp"
+
+"pwm1": "pwm1_grp"
+
+"pwm2": "pwm2_grp"
+
+"pwm3": "pwm3_grp"
+
+"pwm4": "pwm4_grp"
+
+"pwm5": "pwm5_grp"
+
+"key": "key0_grp", "key1_grp", "key2_grp", "key3_grp", "key4_grp", "key5_grp",
+"key6_grp", "key7_grp", "key8_grp", "key9_grp", "key10_grp", "key11_grp",
+"key12_grp", "key13_grp", "key14_grp", "key15_grp"
+
+"audio_dte": "audio_dte0_grp", "audio_dte1_grp", "audio_dte2_grp", "audio_dte3_grp"
+
+"smart_card0": "smart_card0_grp", "smart_card0_fcb_grp"
+
+"smart_card1": "smart_card1_grp", "smart_card1_fcb_grp"
+
+"spi0": "spi0_grp"
+
+"spi1": "spi1_grp"
+
+"spi2": "spi2_grp"
+
+"spi3": "spi3_grp"
+
+"spi4": "spi4_0_grp", "spi4_1_grp"
+
+"spi5": "spi5_grp"
+
+"sw_led0": "sw_led0_0_grp", "sw_led0_1_grp"
+
+"sw_led1": "sw_led1_grp"
+
+"sw_led2": "sw_led2_0_grp", "sw_led2_1_grp"
+
+"d1w": "d1w_grp"
+
+"lcd": "lcd_grp"
+
+"sram": "sram_0_grp", "sram_1_grp"
+
+"uart0": "uart0_grp"
+
+"uart1": "uart1_grp", "uart1_dte_grp"
+
+"uart2": "uart2_grp"
+
+"uart3": "uart3_grp"
+
+"uart4": "uart4_grp"
+
+"qspi": "qspi_0_grp", "qspi_1_grp"
+
+"nand": "nand_grp"
+
+"sdio0": "sdio0_grp", "sdio0_cd_grp", "sdio0_mmc_grp"
+
+"sdio1": "sdio1_data_0_grp", "sdio1_data_1_grp", "sdio1_cd_grp",
+"sdio1_led_grp", "sdio1_mmc_grp"
+
+"can0": "can0_grp"
+
+"can1": "can1_grp"
+
+"cam": "cam_led_grp", "cam_0_grp", "cam_1_grp"
+
+"bsc1": "bsc1_grp"
+
+"pcie_clkreq": "pcie_clkreq_grp"
+
+"usb0_oc": "usb0_oc_grp"
+
+"usb1_oc": "usb1_oc_grp"
+
+"usb2_oc": "usb2_oc_grp"
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
new file mode 100644
index 0000000000..a73cbeb0f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
@@ -0,0 +1,123 @@
+Broadcom iProc GPIO/PINCONF Controller
+
+Required properties:
+
+- compatible:
+ "brcm,iproc-gpio" for the generic iProc based GPIO controller IP that
+ supports full-featured pinctrl and GPIO functions used in various iProc
+ based SoCs
+
+ May contain an SoC-specific compatibility string to accommodate any
+ SoC-specific features
+
+ "brcm,cygnus-ccm-gpio", "brcm,cygnus-asiu-gpio", or
+ "brcm,cygnus-crmu-gpio" for Cygnus SoCs
+
+ "brcm,iproc-nsp-gpio" for the iProc NSP SoC that has drive strength support
+ disabled
+
+ "brcm,iproc-stingray-gpio" for the iProc Stingray SoC that has the general
+ pinctrl support completely disabled in this IP block. In Stingray, a
+ different IP block is used to handle pinctrl related functions
+
+- reg:
+ Define the base and range of the I/O address space that contains SoC
+GPIO/PINCONF controller registers
+
+- ngpios:
+ Total number of in-use slots in GPIO controller
+
+- #gpio-cells:
+ Must be two. The first cell is the GPIO pin number (within the
+controller's pin space) and the second cell is used for the following:
+ bit[0]: polarity (0 for active high and 1 for active low)
+
+- gpio-controller:
+ Specifies that the node is a GPIO controller
+
+Optional properties:
+
+- interrupts:
+ Interrupt ID
+
+- interrupt-controller:
+ Specifies that the node is an interrupt controller
+
+- gpio-ranges:
+ Specifies the mapping between gpio controller and pin-controllers pins.
+ This requires 4 fields in cells defined as -
+ 1. Phandle of pin-controller.
+ 2. GPIO base pin offset.
+ 3 Pin-control base pin offset.
+ 4. number of gpio pins which are linearly mapped from pin base.
+
+Supported generic PINCONF properties in child nodes:
+
+- pins:
+ The list of pins (within the controller's own pin space) that properties
+in the node apply to. Pin names are "gpio-<pin>"
+
+- bias-disable:
+ Disable pin bias
+
+- bias-pull-up:
+ Enable internal pull up resistor
+
+- bias-pull-down:
+ Enable internal pull down resistor
+
+- drive-strength:
+ Valid drive strength values include 2, 4, 6, 8, 10, 12, 14, 16 (mA)
+
+Example:
+ gpio_ccm: gpio@1800a000 {
+ compatible = "brcm,cygnus-ccm-gpio";
+ reg = <0x1800a000 0x50>,
+ <0x0301d164 0x20>;
+ ngpios = <24>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+
+ touch_pins: touch_pins {
+ pwr: pwr {
+ pins = "gpio-0";
+ drive-strength = <16>;
+ };
+
+ event: event {
+ pins = "gpio-1";
+ bias-pull-up;
+ };
+ };
+ };
+
+ gpio_asiu: gpio@180a5000 {
+ compatible = "brcm,cygnus-asiu-gpio";
+ reg = <0x180a5000 0x668>;
+ ngpios = <146>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ gpio-ranges = <&pinctrl 0 42 1>,
+ <&pinctrl 1 44 3>;
+ };
+
+ /*
+ * Touchscreen that uses the CCM GPIO 0 and 1
+ */
+ tsc {
+ ...
+ ...
+ gpio-pwr = <&gpio_ccm 0 0>;
+ gpio-event = <&gpio_ccm 1 0>;
+ };
+
+ /* Bluetooth that uses the ASIU GPIO 5, with polarity inverted */
+ bluetooth {
+ ...
+ ...
+ bcm,rfkill-bank-sel = <&gpio_asiu 5 1>
+ }
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml
new file mode 100644
index 0000000000..0a39dd26ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,ns-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Northstar pins mux controller
+
+maintainers:
+ - Rafał Miłecki <rafal@milecki.pl>
+
+description:
+ Some of Northstar SoCs's pins can be used for various purposes thanks to the
+ mux controller. This binding allows describing mux controller and listing
+ available functions. They can be referenced later by other bindings to let
+ system configure controller correctly.
+
+ A list of pins varies across chipsets so few bindings are available.
+
+properties:
+ compatible:
+ enum:
+ - brcm,bcm4708-pinmux
+ - brcm,bcm4709-pinmux
+ - brcm,bcm53012-pinmux
+
+ reg:
+ maxItems: 1
+
+ reg-names:
+ const: cru_gpio_control
+
+patternProperties:
+ '-pins$':
+ type: object
+ description: pin node
+ $ref: pinmux-node.yaml#
+
+ properties:
+ function:
+ enum: [ spi, i2c, pwm, uart1, mdio, uart2, sdio ]
+ groups:
+ minItems: 1
+ maxItems: 4
+ items:
+ enum: [ spi_grp, i2c_grp, pwm0_grp, pwm1_grp, pwm2_grp, pwm3_grp,
+ uart1_grp, mdio_grp, uart2_grp, sdio_pwr_grp, sdio_1p8v_grp ]
+
+ required:
+ - function
+ - groups
+
+ additionalProperties: false
+
+allOf:
+ - $ref: pinctrl.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: brcm,bcm4708-pinmux
+ then:
+ patternProperties:
+ '-pins$':
+ properties:
+ function:
+ enum: [ spi, i2c, pwm, uart1 ]
+ groups:
+ items:
+ enum: [ spi_grp, i2c_grp, pwm0_grp, pwm1_grp, pwm2_grp, pwm3_grp,
+ uart1_grp ]
+
+required:
+ - reg
+ - reg-names
+
+additionalProperties: false
+
+examples:
+ - |
+ pinctrl@1800c1c0 {
+ compatible = "brcm,bcm4708-pinmux";
+ reg = <0x1800c1c0 0x24>;
+ reg-names = "cru_gpio_control";
+
+ spi-pins {
+ function = "spi";
+ groups = "spi_grp";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt
new file mode 100644
index 0000000000..40e0a9a195
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,ns2-pinmux.txt
@@ -0,0 +1,102 @@
+Broadcom Northstar2 IOMUX Controller
+
+The Northstar2 IOMUX controller supports group based mux configuration. There
+are some individual pins that support modifying the pinconf parameters.
+
+Required properties:
+
+- compatible:
+ Must be "brcm,ns2-pinmux"
+
+- reg:
+ Define the base and range of the I/O address space that contains the
+ Northstar2 IOMUX and pin configuration registers.
+
+Properties in sub nodes:
+
+- function:
+ The mux function to select
+
+- groups:
+ The list of groups to select with a given function
+
+- pins:
+ List of pin names to change configuration
+
+The generic properties bias-disable, bias-pull-down, bias-pull-up,
+drive-strength, slew-rate, input-enable, input-disable are supported
+for some individual pins listed at the end.
+
+For more details, refer to
+Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+For example:
+
+ pinctrl: pinctrl@6501d130 {
+ compatible = "brcm,ns2-pinmux";
+ reg = <0x6501d130 0x08>,
+ <0x660a0028 0x04>,
+ <0x660009b0 0x40>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_sel>, <&uart3_rx>, <&sdio0_d4>;
+
+ /* Select nand function */
+ nand_sel: nand_sel {
+ function = "nand";
+ groups = "nand_grp";
+ };
+
+ /* Pull up the uart3 rx pin */
+ uart3_rx: uart3_rx {
+ pins = "uart3_sin";
+ bias-pull-up;
+ };
+
+ /* Set the drive strength of sdio d4 pin */
+ sdio0_d4: sdio0_d4 {
+ pins = "sdio0_data4";
+ drive-strength = <8>;
+ };
+ };
+
+List of supported functions and groups in Northstar2:
+
+"nand": "nand_grp"
+
+"nor": "nor_data_grp", "nor_adv_grp", "nor_addr_0_3_grp", "nor_addr_4_5_grp",
+ "nor_addr_6_7_grp", "nor_addr_8_9_grp", "nor_addr_10_11_grp",
+ "nor_addr_12_15_grp"
+
+"gpio": "gpio_0_1_grp", "gpio_2_5_grp", "gpio_6_7_grp", "gpio_8_9_grp",
+ "gpio_10_11_grp", "gpio_12_13_grp", "gpio_14_17_grp", "gpio_18_19_grp",
+ "gpio_20_21_grp", "gpio_22_23_grp", "gpio_24_25_grp", "gpio_26_27_grp",
+ "gpio_28_29_grp", "gpio_30_31_grp"
+
+"pcie": "pcie_ab1_clk_wak_grp", "pcie_a3_clk_wak_grp", "pcie_b3_clk_wak_grp",
+ "pcie_b2_clk_wak_grp", "pcie_a2_clk_wak_grp"
+
+"uart0": "uart0_modem_grp", "uart0_rts_cts_grp", "uart0_in_out_grp"
+
+"uart1": "uart1_ext_clk_grp", "uart1_dcd_dsr_grp", "uart1_ri_dtr_grp",
+ "uart1_rts_cts_grp", "uart1_in_out_grp"
+
+"uart2": "uart2_rts_cts_grp"
+
+"pwm": "pwm_0_grp", "pwm_1_grp", "pwm_2_grp", "pwm_3_grp"
+
+
+List of pins that support pinconf parameters:
+
+"qspi_wp", "qspi_hold", "qspi_cs", "qspi_sck", "uart3_sin", "uart3_sout",
+"qspi_mosi", "qspi_miso", "spi0_fss", "spi0_rxd", "spi0_txd", "spi0_sck",
+"spi1_fss", "spi1_rxd", "spi1_txd", "spi1_sck", "sdio0_data7",
+"sdio0_emmc_rst", "sdio0_led_on", "sdio0_wp", "sdio0_data3", "sdio0_data4",
+"sdio0_data5", "sdio0_data6", "sdio0_cmd", "sdio0_data0", "sdio0_data1",
+"sdio0_data2", "sdio1_led_on", "sdio1_wp", "sdio0_cd_l", "sdio0_clk",
+"sdio1_data5", "sdio1_data6", "sdio1_data7", "sdio1_emmc_rst", "sdio1_data1",
+"sdio1_data2", "sdio1_data3", "sdio1_data4", "sdio1_cd_l", "sdio1_clk",
+"sdio1_cmd", "sdio1_data0", "ext_mdio_0", "ext_mdc_0", "usb3_p1_vbus_ppc",
+"usb3_p1_overcurrent", "usb3_p0_vbus_ppc", "usb3_p0_overcurrent",
+"usb2_presence_indication", "usb2_vbus_present", "usb2_vbus_ppc",
+"usb2_overcurrent", "sata_led1", "sata_led0"
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,nsp-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,nsp-gpio.txt
new file mode 100644
index 0000000000..0844168a6d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,nsp-gpio.txt
@@ -0,0 +1,80 @@
+Broadcom Northstar plus (NSP) GPIO/PINCONF Controller
+
+Required properties:
+- compatible:
+ Must be "brcm,nsp-gpio-a"
+
+- reg:
+ Should contain the register physical address and length for each of
+ GPIO base, IO control registers
+
+- #gpio-cells:
+ Must be two. The first cell is the GPIO pin number (within the
+ controller's pin space) and the second cell is used for the following:
+ bit[0]: polarity (0 for active high and 1 for active low)
+
+- gpio-controller:
+ Specifies that the node is a GPIO controller
+
+- ngpios:
+ Number of gpios supported (58x25 supports 32 and 58x23 supports 24)
+
+Optional properties:
+- interrupts:
+ Interrupt ID
+
+- interrupt-controller:
+ Specifies that the node is an interrupt controller
+
+- gpio-ranges:
+ Specifies the mapping between gpio controller and pin-controllers pins.
+ This requires 4 fields in cells defined as -
+ 1. Phandle of pin-controller.
+ 2. GPIO base pin offset.
+ 3 Pin-control base pin offset.
+ 4. number of gpio pins which are linearly mapped from pin base.
+
+Supported generic PINCONF properties in child nodes:
+- pins:
+ The list of pins (within the controller's own pin space) that properties
+ in the node apply to. Pin names are "gpio-<pin>"
+
+- bias-disable:
+ Disable pin bias
+
+- bias-pull-up:
+ Enable internal pull up resistor
+
+- bias-pull-down:
+ Enable internal pull down resistor
+
+- drive-strength:
+ Valid drive strength values include 2, 4, 6, 8, 10, 12, 14, 16 (mA)
+
+Example:
+
+ gpioa: gpio@18000020 {
+ compatible = "brcm,nsp-gpio-a";
+ reg = <0x18000020 0x100>,
+ <0x1803f1c4 0x1c>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ ngpios = <32>;
+ gpio-ranges = <&pinctrl 0 0 31>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+
+ /* Hog a few default settings */
+ pinctrl-names = "default";
+ pinctrl-0 = <&led>;
+ led: led {
+ pins = "gpio-1";
+ bias-pull-up;
+ };
+
+ pwr: pwr {
+ gpio-hog;
+ gpios = <3 1>;
+ output-high;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt
new file mode 100644
index 0000000000..dede11e4ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt
@@ -0,0 +1,79 @@
+Broadcom NSP (Northstar plus) IOMUX Controller
+
+The NSP IOMUX controller supports group based mux configuration. In
+addition, certain pins can be muxed to GPIO function individually.
+
+Required properties:
+- compatible:
+ Must be "brcm,nsp-pinmux"
+
+- reg:
+ Should contain the register physical address and length for each of
+ GPIO_CONTROL0, GP_AUX_SEL and IPROC_CONFIG IOMUX registers
+
+Properties in subnodes:
+- function:
+ The mux function to select
+
+- groups:
+ The list of groups to select with a given function
+
+For more details, refer to
+Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+For example:
+
+ pinmux: pinmux@1803f1c0 {
+ compatible = "brcm,nsp-pinmux";
+ reg = <0x1803f1c0 0x04>,
+ <0x18030028 0x04>,
+ <0x1803f408 0x04>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm>, <&gpio_b>, <&nand_sel>;
+
+ pwm: pwm {
+ function = "pwm";
+ groups = "pwm0_grp", "pwm1_grp";
+ };
+
+ gpio_b: gpio_b {
+ function = "gpio_b";
+ groups = "gpio_b_0_grp", "gpio_b_1_grp";
+ };
+
+ nand_sel: nand_sel {
+ function = "nand";
+ groups = "nand_grp";
+ };
+ };
+
+List of supported functions and groups in Northstar Plus:
+
+"spi": "spi_grp"
+
+"i2c": "i2c_grp"
+
+"mdio": "mdio_grp"
+
+"pwm": "pwm0_grp", "pwm1_grp", "pwm2_grp", "pwm3_grp"
+
+"gpio_b": "gpio_b_0_grp", "gpio_b_1_grp", "gpio_b_2_grp", "gpio_b_3_grp"
+
+"uart1": "uart1_grp"
+
+"uart2": "uart2_grp"
+
+"synce": "synce_grp"
+
+"sata_led_grps": "sata0_led_grp", "sata1_led_grp"
+
+"xtal_out": "xtal_out_grp"
+
+"sdio": "sdio_pwr_grp", "sdio_1p8v_grp"
+
+"switch_led": "switch_p05_led0_grp", "switch_p05_led1_grp"
+
+"nand": "nand_grp"
+
+"emmc": "emmc_grp"
diff --git a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml
new file mode 100644
index 0000000000..beb769e887
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/canaan,k210-fpioa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Canaan Kendryte K210 FPIOA
+
+maintainers:
+ - Damien Le Moal <dlemoal@kernel.org>
+
+description:
+ The Canaan Kendryte K210 SoC Fully Programmable IO Array (FPIOA)
+ controller allows assigning any of 256 possible functions to any of
+ 48 IO pins of the SoC. Pin function configuration is performed on
+ a per-pin basis.
+
+properties:
+ compatible:
+ const: canaan,k210-fpioa
+
+ reg:
+ maxItems: 1
+ description:
+ Address and length of the register set for the FPIOA controller.
+
+ clocks:
+ items:
+ - description: Controller reference clock source
+ - description: APB interface clock source
+
+ clock-names:
+ items:
+ - const: ref
+ - const: pclk
+
+ resets:
+ maxItems: 1
+
+ canaan,k210-sysctl-power:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: phandle of the K210 system controller node
+ - description: offset of its power domain control register
+ description: |
+ phandle of the K210 system controller node and offset of its
+ power domain control register.
+
+patternProperties:
+ '-pinmux$':
+ type: object
+ $ref: /schemas/pinctrl/pinmux-node.yaml
+ description:
+ FPIOA client devices use sub-nodes to define the desired pin
+ configuration. Client device sub-nodes use the pinux property
+ below.
+
+ properties:
+ pinmux:
+ description:
+ List of IO pins alternate functions. The values for each IO
+ pin is a combination of an IO pin number (0 to 47) with the
+ desired function for the IO pin. Functions are defined as
+ macros in include/dt-bindings/pinctrl/k210-fpioa.h.
+ The K210_FPIOA(IO pin, function) macro is provided to
+ facilitate the combination of IO pin numbers and functions.
+
+ required:
+ - pinmux
+
+ additionalProperties: false
+
+ '-pins$':
+ type: object
+ $ref: /schemas/pinctrl/pincfg-node.yaml
+ description:
+ FPIOA client devices use sub-nodes to define the desired
+ configuration of pins. Client device sub-nodes use the
+ properties below.
+
+ properties:
+ pins:
+ description:
+ List of IO pins affected by the properties specified in this
+ subnode. IO pins are identified using the pin names "IO_xx".
+ Pin configuration nodes can also define the power domain to
+ be used for the SoC pin groups A0 (IO pins 0-5),
+ A1 (IO pins 6-11), A2 (IO pins 12-17), B0 (IO pins 18-23),
+ B1 (IO pins 24-29), B2 (IO pins 30-35), B3 (IO pins 30-35),
+ C0 (IO pins 36-41) and C1 (IO pins 42-47) using the
+ power-source property.
+ items:
+ anyOf:
+ - pattern: "^(IO_([0-9]*))|(A[0-2])|(B[3-5])|(C[6-7])$"
+ - enum: [ IO_0, IO_1, IO_2, IO_3, IO_4, IO_5, IO_6, IO_7,
+ IO_8, IO_9, IO_10, IO_11, IO_12, IO_13, IO_14,
+ IO_15, IO_16, IO_17, IO_18, IO_19, IO_20, IO_21,
+ IO_22, IO_23, IO_24, IO_25, IO_26, IO_27, IO_28,
+ IO_29, IO_30, IO_31, IO_32, IO_33, IO_34, IO_35,
+ IO_36, IO_37, IO_38, IO_39, IO_40, IO_41, IO_42,
+ IO_43, IO_44, IO_45, IO_46, IO_47,
+ A0, A1, A2, B3, B4, B5, C6, C7 ]
+ bias-disable: true
+
+ bias-pull-down: true
+
+ bias-pull-up: true
+
+ drive-strength: true
+
+ drive-strength-microamp: true
+
+ input-enable: true
+
+ input-disable: true
+
+ input-schmitt-enable: true
+
+ input-schmitt-disable: true
+
+ input-polarity-invert:
+ type: boolean
+ description:
+ Enable or disable pin input polarity inversion.
+
+ output-enable: true
+
+ output-disable: true
+
+ output-high: true
+
+ output-low: true
+
+ output-polarity-invert:
+ type: boolean
+ description:
+ Enable or disable pin output polarity inversion.
+
+ slew-rate: true
+
+ power-source: true
+
+ additionalProperties: false
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - canaan,k210-sysctl-power
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/k210-fpioa.h>
+ #include <dt-bindings/clock/k210-clk.h>
+ #include <dt-bindings/reset/k210-rst.h>
+
+ fpioa: pinmux@502b0000 {
+ compatible = "canaan,k210-fpioa";
+ reg = <0x502b0000 0x100>;
+ clocks = <&sysclk K210_CLK_FPIOA>,
+ <&sysclk K210_CLK_APB0>;
+ clock-names = "ref", "pclk";
+ resets = <&sysrst K210_RST_FPIOA>;
+ canaan,k210-sysctl-power = <&sysctl 108>;
+ pinctrl-0 = <&jtag_pinctrl>;
+ pinctrl-names = "default";
+
+ jtag_pinctrl: jtag-pinmux {
+ pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
+ <K210_FPIOA(1, K210_PCF_JTAG_TDI)>,
+ <K210_FPIOA(2, K210_PCF_JTAG_TMS)>,
+ <K210_FPIOA(3, K210_PCF_JTAG_TDO)>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml
new file mode 100644
index 0000000000..5e000b3fad
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml
@@ -0,0 +1,186 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/cirrus,lochnagar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Lochnagar Audio Development Board
+
+maintainers:
+ - patches@opensource.cirrus.com
+
+description: |
+ Lochnagar is an evaluation and development board for Cirrus Logic
+ Smart CODEC and Amp devices. It allows the connection of most Cirrus
+ Logic devices on mini-cards, as well as allowing connection of various
+ application processor systems to provide a full evaluation platform.
+ Audio system topology, clocking and power can all be controlled through
+ the Lochnagar, allowing the device under test to be used in a variety of
+ possible use cases.
+
+ This binding document describes the binding for the pinctrl portion of
+ the driver.
+
+ Also see these documents for generic binding information:
+ [1] GPIO : ../gpio/gpio.txt
+ [2] Pinctrl: ../pinctrl/pinctrl-bindings.txt
+
+ And these for relevant defines:
+ [3] include/dt-bindings/pinctrl/lochnagar.h
+
+ This binding must be part of the Lochnagar MFD binding:
+ [4] ../mfd/cirrus,lochnagar.yaml
+
+properties:
+ compatible:
+ enum:
+ - cirrus,lochnagar-pinctrl
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ description:
+ The first cell is the pin number and the second cell is used
+ to specify optional parameters.
+ const: 2
+
+ gpio-ranges:
+ description:
+ Range of pins managed by the GPIO controller, see [1]. Both the
+ GPIO and Pinctrl base should be set to zero and the count to the
+ appropriate of the LOCHNAGARx_PIN_NUM_GPIOS define, see [3].
+ maxItems: 1
+
+ pin-settings:
+ type: object
+ patternProperties:
+ '-pins$':
+ description:
+ The pin configurations are defined as a child of the pinctrl
+ states node, see [2]. Each sub-node can have the following
+ properties.
+ type: object
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+ properties:
+ groups:
+ description:
+ A list of groups to select (either this or "pins" must be
+ specified), available groups.
+ enum: [ codec-aif1, codec-aif2, codec-aif3, dsp-aif1,
+ dsp-aif2, psia1, psia2, gf-aif1, gf-aif2, gf-aif3,
+ gf-aif4, spdif-aif, usb-aif1, usb-aif2, adat-aif,
+ soundcard-aif ]
+
+ pins:
+ description:
+ A list of pin names to select (either this or "groups" must
+ be specified), available pins.
+ enum: [ fpga-gpio1, fpga-gpio2, fpga-gpio3, fpga-gpio4,
+ fpga-gpio5, fpga-gpio6, codec-gpio1, codec-gpio2,
+ codec-gpio3, codec-gpio4, codec-gpio5, codec-gpio6,
+ codec-gpio7, codec-gpio8, dsp-gpio1, dsp-gpio2,
+ dsp-gpio3, dsp-gpio4, dsp-gpio5, dsp-gpio6,
+ gf-gpio2, gf-gpio3, gf-gpio7, codec-aif1-bclk,
+ codec-aif1-rxdat, codec-aif1-lrclk, codec-aif1-txdat,
+ codec-aif2-bclk, codec-aif2-rxdat, codec-aif2-lrclk,
+ codec-aif2-txdat, codec-aif3-bclk, codec-aif3-rxdat,
+ codec-aif3-lrclk, codec-aif3-txdat, dsp-aif1-bclk,
+ dsp-aif1-rxdat, dsp-aif1-lrclk, dsp-aif1-txdat,
+ dsp-aif2-bclk, dsp-aif2-rxdat, dsp-aif2-lrclk,
+ dsp-aif2-txdat, psia1-bclk, psia1-rxdat, psia1-lrclk,
+ psia1-txdat, psia2-bclk, psia2-rxdat, psia2-lrclk,
+ psia2-txdat, gf-aif3-bclk, gf-aif3-rxdat,
+ gf-aif3-lrclk, gf-aif3-txdat, gf-aif4-bclk,
+ gf-aif4-rxdat, gf-aif4-lrclk, gf-aif4-txdat,
+ gf-aif1-bclk, gf-aif1-rxdat, gf-aif1-lrclk,
+ gf-aif1-txdat, gf-aif2-bclk, gf-aif2-rxdat,
+ gf-aif2-lrclk, gf-aif2-txdat, dsp-uart1-rx,
+ dsp-uart1-tx, dsp-uart2-rx, dsp-uart2-tx,
+ gf-uart2-rx, gf-uart2-tx, usb-uart-rx, codec-pdmclk1,
+ codec-pdmdat1, codec-pdmclk2, codec-pdmdat2,
+ codec-dmicclk1, codec-dmicdat1, codec-dmicclk2,
+ codec-dmicdat2, codec-dmicclk3, codec-dmicdat3,
+ codec-dmicclk4, codec-dmicdat4, dsp-dmicclk1,
+ dsp-dmicdat1, dsp-dmicclk2, dsp-dmicdat2, i2c2-scl,
+ i2c2-sda, i2c3-scl, i2c3-sda, i2c4-scl, i2c4-sda,
+ dsp-standby, codec-mclk1, codec-mclk2, dsp-clkin,
+ psia1-mclk, psia2-mclk, gf-gpio1, gf-gpio5,
+ dsp-gpio20, led1, led2 ]
+
+ function:
+ description:
+ The mux function to select, available functions.
+ enum: [ aif, fpga-gpio1, fpga-gpio2, fpga-gpio3, fpga-gpio4,
+ fpga-gpio5, fpga-gpio6, codec-gpio1, codec-gpio2,
+ codec-gpio3, codec-gpio4, codec-gpio5, codec-gpio6,
+ codec-gpio7, codec-gpio8, dsp-gpio1, dsp-gpio2,
+ dsp-gpio3, dsp-gpio4, dsp-gpio5, dsp-gpio6,
+ gf-gpio2, gf-gpio3, gf-gpio7, gf-gpio1, gf-gpio5,
+ dsp-gpio20, codec-clkout, dsp-clkout, pmic-32k,
+ spdif-clkout, clk-12m288, clk-11m2986, clk-24m576,
+ clk-22m5792, xmos-mclk, gf-clkout1, gf-mclk1,
+ gf-mclk3, gf-mclk2, gf-clkout2, codec-mclk1,
+ codec-mclk2, dsp-clkin, psia1-mclk, psia2-mclk,
+ spdif-mclk, codec-irq, codec-reset, dsp-reset,
+ dsp-irq, dsp-standby, codec-pdmclk1, codec-pdmdat1,
+ codec-pdmclk2, codec-pdmdat2, codec-dmicclk1,
+ codec-dmicdat1, codec-dmicclk2, codec-dmicdat2,
+ codec-dmicclk3, codec-dmicdat3, codec-dmicclk4,
+ codec-dmicdat4, dsp-dmicclk1, dsp-dmicdat1,
+ dsp-dmicclk2, dsp-dmicdat2, dsp-uart1-rx,
+ dsp-uart1-tx, dsp-uart2-rx, dsp-uart2-tx,
+ gf-uart2-rx, gf-uart2-tx, usb-uart-rx, usb-uart-tx,
+ i2c2-scl, i2c2-sda, i2c3-scl, i2c3-sda, i2c4-scl,
+ i2c4-sda, spdif-aif, psia1, psia1-bclk, psia1-lrclk,
+ psia1-rxdat, psia1-txdat, psia2, psia2-bclk,
+ psia2-lrclk, psia2-rxdat, psia2-txdat, codec-aif1,
+ codec-aif1-bclk, codec-aif1-lrclk, codec-aif1-rxdat,
+ codec-aif1-txdat, codec-aif2, codec-aif2-bclk,
+ codec-aif2-lrclk, codec-aif2-rxdat, codec-aif2-txdat,
+ codec-aif3, codec-aif3-bclk, codec-aif3-lrclk,
+ codec-aif3-rxdat, codec-aif3-txdat, dsp-aif1,
+ dsp-aif1-bclk, dsp-aif1-lrclk, dsp-aif1-rxdat,
+ dsp-aif1-txdat, dsp-aif2, dsp-aif2-bclk,
+ dsp-aif2-lrclk, dsp-aif2-rxdat, dsp-aif2-txdat,
+ gf-aif3, gf-aif3-bclk, gf-aif3-lrclk, gf-aif3-rxdat,
+ gf-aif3-txdat, gf-aif4, gf-aif4-bclk, gf-aif4-lrclk,
+ gf-aif4-rxdat, gf-aif4-txdat, gf-aif1, gf-aif1-bclk,
+ gf-aif1-lrclk, gf-aif1-rxdat, gf-aif1-txdat, gf-aif2,
+ gf-aif2-bclk, gf-aif2-lrclk, gf-aif2-rxdat,
+ gf-aif2-txdat, usb-aif1, usb-aif2, adat-aif,
+ soundcard-aif ]
+
+ output-enable:
+ description:
+ Specifies that an AIF group will be used as a master
+ interface (either this or input-enable is required if a
+ group is being muxed to an AIF)
+
+ input-enable:
+ description:
+ Specifies that an AIF group will be used as a slave
+ interface (either this or output-enable is required if a
+ group is being muxed to an AIF)
+
+ additionalProperties: false
+
+ required:
+ - function
+
+ additionalProperties: false
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+ - pinctrl-0
+ - pinctrl-names
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml
new file mode 100644
index 0000000000..bb61a30321
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/cirrus,madera.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Madera class audio CODECs pinctrl driver
+
+maintainers:
+ - patches@opensource.cirrus.com
+
+description: |
+ The Cirrus Logic Madera codecs provide a number of GPIO functions for
+ interfacing to external hardware and to provide logic outputs to other devices.
+ Certain groups of GPIO pins also have an alternate function, normally as an
+ audio interface.
+
+ The set of available GPIOs, functions and alternate function groups differs
+ between CODECs so refer to the datasheet for the CODEC for further information
+ on what is supported on that device.
+
+ The properties for this driver exist within the parent MFD driver node.
+
+ See also the core bindings for the parent MFD driver:
+
+ Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
+
+ And the generic pinmix bindings:
+
+ Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+properties:
+ pin-settings:
+ description:
+ One subnode is required to contain the default settings. It
+ contains an arbitrary number of configuration subnodes, one for
+ each group or pin configuration you want to apply as a default.
+ type: object
+ patternProperties:
+ '-pins$':
+ type: object
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+ properties:
+ groups:
+ description:
+ Name of one pin group to configure.
+ enum: [ aif1, aif2, aif3, aif4, mif1, mif2, mif3, pdmspk1,
+ pdmspk2, dmic4, dmic5, dmic6, gpio1, gpio2, gpio3,
+ gpio4, gpio5, gpio6, gpio7, gpio8, gpio9,
+ gpio10, gpio11, gpio12, gpio13, gpio14, gpio15,
+ gpio16, gpio17, gpio18, gpio19, gpio20, gpio21,
+ gpio22, gpio23, gpio24, gpio25, gpio26, gpio27,
+ gpio28, gpio29, gpio30, gpio31, gpio32, gpio33,
+ gpio34, gpio35, gpio36, gpio37, gpio38, gpio39 ]
+
+ function:
+ description:
+ Name of function to assign to this group.
+ enum: [ aif1, aif2, aif3, aif4, mif1, mif2, mif3,
+ pdmspk1, pdmspk2, dmic3, dmic4, dmic5,
+ dmic6, io, dsp-gpio, irq1, irq2, fll1-clk,
+ fll1-lock, fll2-clk, fll2-lock, fll3-clk,
+ fll3-lock, fllao-clk, fllao-lock, opclk,
+ opclk-async, pwm1, pwm2, spdif, asrc1-in1-lock,
+ asrc1-in2-lock, asrc2-in1-lock, asrc2-in2-lock,
+ spkl-short-circuit, spkr-short-circuit,
+ spk-shutdown, spk-overheat-shutdown,
+ spk-overheat-warn, timer1-sts, timer2-sts,
+ timer3-sts, timer4-sts, timer5-sts, timer6-sts,
+ timer7-sts, timer8-sts, log1-fifo-ne,
+ log2-fifo-ne, log3-fifo-ne, log4-fifo-ne,
+ log5-fifo-ne, log6-fifo-ne, log7-fifo-ne,
+ log8-fifo-ne ]
+
+ bias-disable: true
+
+ bias-bus-hold: true
+
+ bias-pull-up: true
+
+ bias-pull-down: true
+
+ drive-push-pull: true
+
+ drive-open-drain: true
+
+ drive-strength:
+ enum: [ 4, 8 ]
+
+ input-schmitt-enable: true
+
+ input-schmitt-disable: true
+
+ input-debounce: true
+
+ output-low: true
+
+ output-high: true
+
+ additionalProperties: false
+
+ required:
+ - groups
+
+ additionalProperties: false
+
+required:
+ - pinctrl-0
+ - pinctrl-names
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/pinctrl/cnxt,cx92755-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/cnxt,cx92755-pinctrl.txt
new file mode 100644
index 0000000000..23ce8dc269
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/cnxt,cx92755-pinctrl.txt
@@ -0,0 +1,86 @@
+Conexant Digicolor CX92755 General Purpose Pin Mapping
+
+This document describes the device tree binding of the pin mapping hardware
+modules in the Conexant Digicolor CX92755 SoCs. The CX92755 in one of the
+Digicolor series of SoCs.
+
+=== Pin Controller Node ===
+
+Required Properties:
+
+- compatible: Must be "cnxt,cx92755-pinctrl"
+- reg: Base address of the General Purpose Pin Mapping register block and the
+ size of the block.
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells: Must be <2>. The first cell is the pin number and the
+ second cell is used to specify flags. See include/dt-bindings/gpio/gpio.h
+ for possible values.
+
+For example, the following is the bare minimum node:
+
+ pinctrl: pinctrl@f0000e20 {
+ compatible = "cnxt,cx92755-pinctrl";
+ reg = <0xf0000e20 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+As a pin controller device, in addition to the required properties, this node
+should also contain the pin configuration nodes that client devices reference,
+if any.
+
+For a general description of GPIO bindings, please refer to ../gpio/gpio.txt.
+
+=== Pin Configuration Node ===
+
+Each pin configuration node is a sub-node of the pin controller node and is a
+container of an arbitrary number of subnodes, called pin group nodes in this
+document.
+
+Please refer to the pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the definition of a
+"pin configuration node".
+
+=== Pin Group Node ===
+
+A pin group node specifies the desired pin mux for an arbitrary number of
+pins. The name of the pin group node is optional and not used.
+
+A pin group node only affects the properties specified in the node, and has no
+effect on any properties that are omitted.
+
+The pin group node accepts a subset of the generic pin config properties. For
+details generic pin config properties, please refer to pinctrl-bindings.txt
+and <include/linux/pinctrl/pinconfig-generic.h>.
+
+Required Pin Group Node Properties:
+
+- pins: Multiple strings. Specifies the name(s) of one or more pins to be
+ configured by this node. The format of a pin name string is "GP_xy", where x
+ is an uppercase character from 'A' to 'R', and y is a digit from 0 to 7.
+- function: String. Specifies the pin mux selection. Values must be one of:
+ "gpio", "client_a", "client_b", "client_c"
+
+Example:
+ pinctrl: pinctrl@f0000e20 {
+ compatible = "cnxt,cx92755-pinctrl";
+ reg = <0xf0000e20 0x100>;
+
+ uart0_default: uart0_active {
+ data_signals {
+ pins = "GP_O0", "GP_O1";
+ function = "client_b";
+ };
+ };
+ };
+
+ uart0: uart@f0000740 {
+ compatible = "cnxt,cx92755-usart";
+ ...
+ pinctrl-0 = <&uart0_default>;
+ pinctrl-names = "default";
+ };
+
+In the example above, a single pin group configuration node defines the
+"client select" for the Rx and Tx signals of uart0. The uart0 node references
+that pin configuration node using the &uart0_default phandle.
diff --git a/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt
new file mode 100644
index 0000000000..4346ff2dd8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt
@@ -0,0 +1,68 @@
+Cortina Systems Gemini pin controller
+
+This pin controller is found in the Cortina Systems Gemini SoC family,
+see further arm/gemini.txt. It is a purely group-based multiplexing pin
+controller.
+
+The pin controller node must be a subnode of the system controller node.
+
+Required properties:
+- compatible: "cortina,gemini-pinctrl"
+
+Subnodes of the pin controller contain pin control multiplexing set-up
+and pin configuration of individual pins.
+
+Please refer to pinctrl-bindings.txt for generic pin multiplexing nodes
+and generic pin config nodes.
+
+Supported configurations:
+- skew-delay is supported on the Ethernet pins
+- drive-strength with 4, 8, 12 or 16 mA as argument is supported for
+ entire groups on the groups "idegrp", "gmii_gmac0_grp", "gmii_gmac1_grp"
+ and "pcigrp".
+
+Example:
+
+
+syscon {
+ compatible = "cortina,gemini-syscon";
+ ...
+ pinctrl {
+ compatible = "cortina,gemini-pinctrl";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dram_default_pins>, <&system_default_pins>,
+ <&vcontrol_default_pins>;
+
+ dram_default_pins: pinctrl-dram {
+ mux {
+ function = "dram";
+ groups = "dramgrp";
+ };
+ };
+ rtc_default_pins: pinctrl-rtc {
+ mux {
+ function = "rtc";
+ groups = "rtcgrp";
+ };
+ };
+ power_default_pins: pinctrl-power {
+ mux {
+ function = "power";
+ groups = "powergrp";
+ };
+ };
+ system_default_pins: pinctrl-system {
+ mux {
+ function = "system";
+ groups = "systemgrp";
+ };
+ };
+ (...)
+ uart_default_pins: pinctrl-uart {
+ mux {
+ function = "uart";
+ groups = "uartrxtxgrp";
+ };
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml b/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml
new file mode 100644
index 0000000000..7f30ec2f1e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/cypress,cy8c95x0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress CY8C95X0 I2C GPIO expander
+
+maintainers:
+ - Patrick Rudolph <patrick.rudolph@9elements.com>
+
+description: |
+ This supports the 20/40/60 pin Cypress CYC95x0 GPIO I2C expanders.
+ Pin function configuration is performed on a per-pin basis.
+
+properties:
+ compatible:
+ enum:
+ - cypress,cy8c9520
+ - cypress,cy8c9540
+ - cypress,cy8c9560
+
+ reg:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ description:
+ The first cell is the GPIO number and the second cell specifies GPIO
+ flags, as defined in <dt-bindings/gpio/gpio.h>.
+ const: 2
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+ gpio-line-names: true
+
+ gpio-ranges:
+ maxItems: 1
+
+ gpio-reserved-ranges:
+ maxItems: 1
+
+ vdd-supply:
+ description:
+ Optional power supply.
+
+ reset-gpios:
+ description: GPIO connected to the XRES pin
+ maxItems: 1
+
+patternProperties:
+ '-pins$':
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: pincfg-node.yaml#
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ pattern: '^gp([0-7][0-7])$'
+ minItems: 1
+ maxItems: 60
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+ enum: [ gpio, pwm ]
+
+ bias-pull-down: true
+
+ bias-pull-up: true
+
+ bias-disable: true
+
+ output-high: true
+
+ output-low: true
+
+ drive-push-pull: true
+
+ drive-open-drain: true
+
+ drive-open-source: true
+
+ required:
+ - pins
+ - function
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+ - gpio-controller
+ - '#gpio-cells'
+
+additionalProperties: false
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl@20 {
+ compatible = "cypress,cy8c9520";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ vdd-supply = <&p3v3>;
+ gpio-reserved-ranges = <5 1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
new file mode 100644
index 0000000000..a1050b5982
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
@@ -0,0 +1,93 @@
+* Freescale IOMUX Controller (IOMUXC) for i.MX
+
+The IOMUX Controller (IOMUXC), together with the IOMUX, enables the IC
+to share one PAD to several functional blocks. The sharing is done by
+multiplexing the PAD input/output signals. For each PAD there are up to
+8 muxing options (called ALT modes). Since different modules require
+different PAD settings (like pull up, keeper, etc) the IOMUXC controls
+also the PAD settings parameters.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Freescale IMX pin configuration node is a node of a group of pins which can be
+used for a specific device or function. This node represents both mux and config
+of the pins in that group. The 'mux' selects the function mode(also named mux
+mode) this pin can work on and the 'config' configures various pad settings
+such as pull-up, open drain, drive strength, etc.
+
+Required properties for iomux controller:
+- compatible: "fsl,<soc>-iomuxc"
+ Please refer to each fsl,<soc>-pinctrl.txt binding doc for supported SoCs.
+
+Required properties for pin configuration node:
+- fsl,pins: each entry consists of 6 integers and represents the mux and config
+ setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val
+ input_val> are specified using a PIN_FUNC_ID macro, which can be found in
+ imx*-pinfunc.h under device tree source folder. The last integer CONFIG is
+ the pad setting value like pull-up on this pin. And that's why fsl,pins entry
+ looks like <PIN_FUNC_ID CONFIG> in the example below.
+
+Bits used for CONFIG:
+NO_PAD_CTL(1 << 31): indicate this pin does not need config.
+
+SION(1 << 30): Software Input On Field.
+Force the selected mux mode input path no matter of MUX_MODE functionality.
+By default the input path is determined by functionality of the selected
+mux mode (regular).
+
+Other bits are used for PAD setting.
+Please refer to each fsl,<soc>-pinctrl,txt binding doc for SoC specific part
+of bits definitions.
+
+NOTE:
+Some requirements for using fsl,imx-pinctrl binding:
+1. We have pin function node defined under iomux controller node to represent
+ what pinmux functions this SoC supports.
+2. The pin configuration node intends to work on a specific function should
+ to be defined under that specific function node.
+ The function node's name should represent well about what function
+ this group of pins in this pin configuration node are working on.
+3. The driver can use the function node's name and pin configuration node's
+ name describe the pin function and group hierarchy.
+ For example, Linux IMX pinctrl driver takes the function node's name
+ as the function name and pin configuration node's name as group name to
+ create the map table.
+4. Each pin configuration node should have a phandle, devices can set pins
+ configurations by referring to the phandle of that pin configuration node.
+
+Examples:
+usdhc@219c000 { /* uSDHC4 */
+ non-removable;
+ vmmc-supply = <&reg_3p3v>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4_1>;
+};
+
+iomuxc@20e0000 {
+ compatible = "fsl,imx6q-iomuxc";
+ reg = <0x020e0000 0x4000>;
+
+ /* shared pinctrl settings */
+ usdhc4 {
+ pinctrl_usdhc4_1: usdhc4grp-1 {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+ MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
+ MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
+ MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
+ MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
+ >;
+ };
+ ....
+};
+Refer to the IOMUXC controller chapter in imx6q datasheet,
+0x17059 means enable hysteresis, 47KOhm Pull Up, 50Mhz speed,
+80Ohm driver strength and Fast Slew Rate.
+User should refer to each SoC spec to set the correct value.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt
new file mode 100644
index 0000000000..fd653bde18
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt
@@ -0,0 +1,23 @@
+* Freescale IMX25 IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+CONFIG bits definition:
+PAD_CTL_HYS (1 << 8)
+PAD_CTL_PKE (1 << 7)
+PAD_CTL_PUE (1 << 6)
+PAD_CTL_PUS_100K_DOWN (0 << 4)
+PAD_CTL_PUS_47K_UP (1 << 4)
+PAD_CTL_PUS_100K_UP (2 << 4)
+PAD_CTL_PUS_22K_UP (3 << 4)
+PAD_CTL_ODE_CMOS (0 << 3)
+PAD_CTL_ODE_OPENDRAIN (1 << 3)
+PAD_CTL_DSE_NOMINAL (0 << 1)
+PAD_CTL_DSE_HIGH (1 << 1)
+PAD_CTL_DSE_MAX (2 << 1)
+PAD_CTL_SRE_FAST (1 << 0)
+PAD_CTL_SRE_SLOW (0 << 0)
+
+Refer to imx25-pinfunc.h in device tree source folder for all available
+imx25 PIN_FUNC_ID.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt
new file mode 100644
index 0000000000..d1706ea825
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt
@@ -0,0 +1,121 @@
+* Freescale IMX27 IOMUX Controller
+
+Required properties:
+- compatible: "fsl,imx27-iomuxc"
+
+The iomuxc driver node should define subnodes containing of pinctrl configuration subnodes.
+
+Required properties for pin configuration node:
+- fsl,pins: three integers array, represents a group of pins mux and config
+ setting. The format is fsl,pins = <PIN MUX_ID CONFIG>.
+
+ PIN is an integer between 0 and 0xbf. imx27 has 6 ports with 32 configurable
+ configurable pins each. PIN is PORT * 32 + PORT_PIN, PORT_PIN is the pin
+ number on the specific port (between 0 and 31).
+
+ MUX_ID is
+ function + (direction << 2) + (gpio_oconf << 4) + (gpio_iconfa << 8) + (gpio_iconfb << 10)
+
+ function value is used to select the pin function.
+ Possible values:
+ 0 - Primary function
+ 1 - Alternate function
+ 2 - GPIO
+ Registers: GIUS (GPIO In Use), GPR (General Purpose Register)
+
+ direction defines the data direction of the pin.
+ Possible values:
+ 0 - Input
+ 1 - Output
+ Register: DDIR
+
+ gpio_oconf configures the gpio submodule output signal. This does not
+ have any effect unless GPIO function is selected. A/B/C_IN are output
+ signals of function blocks A,B and C. Specific function blocks are
+ described in the reference manual.
+ Possible values:
+ 0 - A_IN
+ 1 - B_IN
+ 2 - C_IN
+ 3 - Data Register
+ Registers: OCR1, OCR2
+
+ gpio_iconfa/b configures the gpio submodule input to functionblocks A and
+ B. GPIO function should be selected if this is configured.
+ Possible values:
+ 0 - GPIO_IN
+ 1 - Interrupt Status Register
+ 2 - Pulldown
+ 3 - Pullup
+ Registers ICONFA1, ICONFA2, ICONFB1 and ICONFB2
+
+ CONFIG can be 0 or 1, meaning Pullup disable/enable.
+
+
+The iomux controller has gpio child nodes which are embedded in the iomux
+control registers. They have to be defined as child nodes of the iomux device
+node. If gpio subnodes are defined "#address-cells", "#size-cells" and "ranges"
+properties for the iomux device node are required.
+
+Example:
+
+iomuxc: iomuxc@10015000 {
+ compatible = "fsl,imx27-iomuxc";
+ reg = <0x10015000 0x600>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio1: gpio@10015000 {
+ ...
+ };
+
+ ...
+
+ uart {
+ pinctrl_uart1: uart-1 {
+ fsl,pins = <
+ 0x8c 0x004 0x0 /* UART1_TXD__UART1_TXD */
+ 0x8d 0x000 0x0 /* UART1_RXD__UART1_RXD */
+ 0x8e 0x004 0x0 /* UART1_CTS__UART1_CTS */
+ 0x8f 0x000 0x0 /* UART1_RTS__UART1_RTS */
+ >;
+ };
+
+ ...
+ };
+};
+
+
+For convenience there are macros defined in imx27-pinfunc.h which provide PIN
+and MUX_ID. They are structured as MX27_PAD_<Pad name>__<Signal name>. The names
+are defined in the i.MX27 reference manual.
+
+The above example using macros:
+
+iomuxc: iomuxc@10015000 {
+ compatible = "fsl,imx27-iomuxc";
+ reg = <0x10015000 0x600>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio1: gpio@10015000 {
+ ...
+ };
+
+ ...
+
+ uart {
+ pinctrl_uart1: uart-1 {
+ fsl,pins = <
+ MX27_PAD_UART1_TXD__UART1_TXD 0x0
+ MX27_PAD_UART1_RXD__UART1_RXD 0x0
+ MX27_PAD_UART1_CTS__UART1_CTS 0x0
+ MX27_PAD_UART1_RTS__UART1_RTS 0x0
+ >;
+ };
+
+ ...
+ };
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx35-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx35-pinctrl.txt
new file mode 100644
index 0000000000..c083dfd25d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx35-pinctrl.txt
@@ -0,0 +1,33 @@
+* Freescale IMX35 IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx35-iomuxc"
+- fsl,pins: two integers array, represents a group of pins mux and config
+ setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
+ pin working on a specific function, CONFIG is the pad setting value like
+ pull-up for this pin. Please refer to imx35 datasheet for the valid pad
+ config settings.
+
+CONFIG bits definition:
+PAD_CTL_DRIVE_VOLAGAGE_18 (1 << 13)
+PAD_CTL_DRIVE_VOLAGAGE_33 (0 << 13)
+PAD_CTL_HYS (1 << 8)
+PAD_CTL_PKE (1 << 7)
+PAD_CTL_PUE (1 << 6)
+PAD_CTL_PUS_100K_DOWN (0 << 4)
+PAD_CTL_PUS_47K_UP (1 << 4)
+PAD_CTL_PUS_100K_UP (2 << 4)
+PAD_CTL_PUS_22K_UP (3 << 4)
+PAD_CTL_ODE_CMOS (0 << 3)
+PAD_CTL_ODE_OPENDRAIN (1 << 3)
+PAD_CTL_DSE_NOMINAL (0 << 1)
+PAD_CTL_DSE_HIGH (1 << 1)
+PAD_CTL_DSE_MAX (2 << 1)
+PAD_CTL_SRE_FAST (1 << 0)
+PAD_CTL_SRE_SLOW (0 << 0)
+
+Refer to imx35-pinfunc.h in device tree source folder for all available
+imx35 PIN_FUNC_ID.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx50-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx50-pinctrl.txt
new file mode 100644
index 0000000000..6da01d619d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx50-pinctrl.txt
@@ -0,0 +1,32 @@
+* Freescale IMX50 IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx50-iomuxc"
+- fsl,pins: two integers array, represents a group of pins mux and config
+ setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
+ pin working on a specific function, CONFIG is the pad setting value like
+ pull-up for this pin. Please refer to imx50 datasheet for the valid pad
+ config settings.
+
+CONFIG bits definition:
+PAD_CTL_HVE (1 << 13)
+PAD_CTL_HYS (1 << 8)
+PAD_CTL_PKE (1 << 7)
+PAD_CTL_PUE (1 << 6)
+PAD_CTL_PUS_100K_DOWN (0 << 4)
+PAD_CTL_PUS_47K_UP (1 << 4)
+PAD_CTL_PUS_100K_UP (2 << 4)
+PAD_CTL_PUS_22K_UP (3 << 4)
+PAD_CTL_ODE (1 << 3)
+PAD_CTL_DSE_LOW (0 << 1)
+PAD_CTL_DSE_MED (1 << 1)
+PAD_CTL_DSE_HIGH (2 << 1)
+PAD_CTL_DSE_MAX (3 << 1)
+PAD_CTL_SRE_FAST (1 << 0)
+PAD_CTL_SRE_SLOW (0 << 0)
+
+Refer to imx50-pinfunc.h in device tree source folder for all available
+imx50 PIN_FUNC_ID.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx51-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx51-pinctrl.txt
new file mode 100644
index 0000000000..4d1408fcc9
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx51-pinctrl.txt
@@ -0,0 +1,32 @@
+* Freescale IMX51 IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx51-iomuxc"
+- fsl,pins: two integers array, represents a group of pins mux and config
+ setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
+ pin working on a specific function, CONFIG is the pad setting value like
+ pull-up for this pin. Please refer to imx51 datasheet for the valid pad
+ config settings.
+
+CONFIG bits definition:
+PAD_CTL_HVE (1 << 13)
+PAD_CTL_HYS (1 << 8)
+PAD_CTL_PKE (1 << 7)
+PAD_CTL_PUE (1 << 6)
+PAD_CTL_PUS_100K_DOWN (0 << 4)
+PAD_CTL_PUS_47K_UP (1 << 4)
+PAD_CTL_PUS_100K_UP (2 << 4)
+PAD_CTL_PUS_22K_UP (3 << 4)
+PAD_CTL_ODE (1 << 3)
+PAD_CTL_DSE_LOW (0 << 1)
+PAD_CTL_DSE_MED (1 << 1)
+PAD_CTL_DSE_HIGH (2 << 1)
+PAD_CTL_DSE_MAX (3 << 1)
+PAD_CTL_SRE_FAST (1 << 0)
+PAD_CTL_SRE_SLOW (0 << 0)
+
+Refer to imx51-pinfunc.h in device tree source folder for all available
+imx51 PIN_FUNC_ID.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx53-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx53-pinctrl.txt
new file mode 100644
index 0000000000..25dcb77cfa
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx53-pinctrl.txt
@@ -0,0 +1,32 @@
+* Freescale IMX53 IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx53-iomuxc"
+- fsl,pins: two integers array, represents a group of pins mux and config
+ setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
+ pin working on a specific function, CONFIG is the pad setting value like
+ pull-up for this pin. Please refer to imx53 datasheet for the valid pad
+ config settings.
+
+CONFIG bits definition:
+PAD_CTL_HVE (1 << 13)
+PAD_CTL_HYS (1 << 8)
+PAD_CTL_PKE (1 << 7)
+PAD_CTL_PUE (1 << 6)
+PAD_CTL_PUS_100K_DOWN (0 << 4)
+PAD_CTL_PUS_47K_UP (1 << 4)
+PAD_CTL_PUS_100K_UP (2 << 4)
+PAD_CTL_PUS_22K_UP (3 << 4)
+PAD_CTL_ODE (1 << 3)
+PAD_CTL_DSE_LOW (0 << 1)
+PAD_CTL_DSE_MED (1 << 1)
+PAD_CTL_DSE_HIGH (2 << 1)
+PAD_CTL_DSE_MAX (3 << 1)
+PAD_CTL_SRE_FAST (1 << 0)
+PAD_CTL_SRE_SLOW (0 << 0)
+
+Refer to imx53-pinfunc.h in device tree source folder for all available
+imx53 PIN_FUNC_ID.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6dl-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6dl-pinctrl.txt
new file mode 100644
index 0000000000..0ac5bee875
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6dl-pinctrl.txt
@@ -0,0 +1,38 @@
+* Freescale IMX6 DualLite/Solo IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx6dl-iomuxc"
+- fsl,pins: two integers array, represents a group of pins mux and config
+ setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
+ pin working on a specific function, CONFIG is the pad setting value like
+ pull-up for this pin. Please refer to imx6dl datasheet for the valid pad
+ config settings.
+
+CONFIG bits definition:
+PAD_CTL_HYS (1 << 16)
+PAD_CTL_PUS_100K_DOWN (0 << 14)
+PAD_CTL_PUS_47K_UP (1 << 14)
+PAD_CTL_PUS_100K_UP (2 << 14)
+PAD_CTL_PUS_22K_UP (3 << 14)
+PAD_CTL_PUE (1 << 13)
+PAD_CTL_PKE (1 << 12)
+PAD_CTL_ODE (1 << 11)
+PAD_CTL_SPEED_LOW (1 << 6)
+PAD_CTL_SPEED_MED (2 << 6)
+PAD_CTL_SPEED_HIGH (3 << 6)
+PAD_CTL_DSE_DISABLE (0 << 3)
+PAD_CTL_DSE_240ohm (1 << 3)
+PAD_CTL_DSE_120ohm (2 << 3)
+PAD_CTL_DSE_80ohm (3 << 3)
+PAD_CTL_DSE_60ohm (4 << 3)
+PAD_CTL_DSE_48ohm (5 << 3)
+PAD_CTL_DSE_40ohm (6 << 3)
+PAD_CTL_DSE_34ohm (7 << 3)
+PAD_CTL_SRE_FAST (1 << 0)
+PAD_CTL_SRE_SLOW (0 << 0)
+
+Refer to imx6dl-pinfunc.h in device tree source folder for all available
+imx6dl PIN_FUNC_ID.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt
new file mode 100644
index 0000000000..546610cf2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt
@@ -0,0 +1,38 @@
+* Freescale IMX6Q IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx6q-iomuxc"
+- fsl,pins: two integers array, represents a group of pins mux and config
+ setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
+ pin working on a specific function, CONFIG is the pad setting value like
+ pull-up for this pin. Please refer to imx6q datasheet for the valid pad
+ config settings.
+
+CONFIG bits definition:
+PAD_CTL_HYS (1 << 16)
+PAD_CTL_PUS_100K_DOWN (0 << 14)
+PAD_CTL_PUS_47K_UP (1 << 14)
+PAD_CTL_PUS_100K_UP (2 << 14)
+PAD_CTL_PUS_22K_UP (3 << 14)
+PAD_CTL_PUE (1 << 13)
+PAD_CTL_PKE (1 << 12)
+PAD_CTL_ODE (1 << 11)
+PAD_CTL_SPEED_LOW (1 << 6)
+PAD_CTL_SPEED_MED (2 << 6)
+PAD_CTL_SPEED_HIGH (3 << 6)
+PAD_CTL_DSE_DISABLE (0 << 3)
+PAD_CTL_DSE_240ohm (1 << 3)
+PAD_CTL_DSE_120ohm (2 << 3)
+PAD_CTL_DSE_80ohm (3 << 3)
+PAD_CTL_DSE_60ohm (4 << 3)
+PAD_CTL_DSE_48ohm (5 << 3)
+PAD_CTL_DSE_40ohm (6 << 3)
+PAD_CTL_DSE_34ohm (7 << 3)
+PAD_CTL_SRE_FAST (1 << 0)
+PAD_CTL_SRE_SLOW (0 << 0)
+
+Refer to imx6q-pinfunc.h in device tree source folder for all available
+imx6q PIN_FUNC_ID.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6sl-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sl-pinctrl.txt
new file mode 100644
index 0000000000..e5f6d1f065
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sl-pinctrl.txt
@@ -0,0 +1,39 @@
+* Freescale IMX6 SoloLite IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx6sl-iomuxc"
+- fsl,pins: two integers array, represents a group of pins mux and config
+ setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is a
+ pin working on a specific function, CONFIG is the pad setting value like
+ pull-up for this pin. Please refer to imx6sl datasheet for the valid pad
+ config settings.
+
+CONFIG bits definition:
+PAD_CTL_LVE (1 << 22)
+PAD_CTL_HYS (1 << 16)
+PAD_CTL_PUS_100K_DOWN (0 << 14)
+PAD_CTL_PUS_47K_UP (1 << 14)
+PAD_CTL_PUS_100K_UP (2 << 14)
+PAD_CTL_PUS_22K_UP (3 << 14)
+PAD_CTL_PUE (1 << 13)
+PAD_CTL_PKE (1 << 12)
+PAD_CTL_ODE (1 << 11)
+PAD_CTL_SPEED_LOW (1 << 6)
+PAD_CTL_SPEED_MED (2 << 6)
+PAD_CTL_SPEED_HIGH (3 << 6)
+PAD_CTL_DSE_DISABLE (0 << 3)
+PAD_CTL_DSE_240ohm (1 << 3)
+PAD_CTL_DSE_120ohm (2 << 3)
+PAD_CTL_DSE_80ohm (3 << 3)
+PAD_CTL_DSE_60ohm (4 << 3)
+PAD_CTL_DSE_48ohm (5 << 3)
+PAD_CTL_DSE_40ohm (6 << 3)
+PAD_CTL_DSE_34ohm (7 << 3)
+PAD_CTL_SRE_FAST (1 << 0)
+PAD_CTL_SRE_SLOW (0 << 0)
+
+Refer to imx6sl-pinfunc.h in device tree source folder for all available
+imx6sl PIN_FUNC_ID.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt
new file mode 100644
index 0000000000..175e8939a3
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt
@@ -0,0 +1,40 @@
+* Freescale i.MX6 SLL IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx6sll-iomuxc"
+- fsl,pins: each entry consists of 6 integers and represents the mux and config
+ setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val
+ input_val> are specified using a PIN_FUNC_ID macro, which can be found in
+ imx6sll-pinfunc.h under device tree source folder. The last integer CONFIG is
+ the pad setting value like pull-up on this pin. Please refer to i.MX6SLL
+ Reference Manual for detailed CONFIG settings.
+
+CONFIG bits definition:
+PAD_CTL_LVE (1 << 22)
+PAD_CTL_HYS (1 << 16)
+PAD_CTL_PUS_100K_DOWN (0 << 14)
+PAD_CTL_PUS_47K_UP (1 << 14)
+PAD_CTL_PUS_100K_UP (2 << 14)
+PAD_CTL_PUS_22K_UP (3 << 14)
+PAD_CTL_PUE (1 << 13)
+PAD_CTL_PKE (1 << 12)
+PAD_CTL_ODE (1 << 11)
+PAD_CTL_SPEED_LOW (0 << 6)
+PAD_CTL_SPEED_MED (1 << 6)
+PAD_CTL_SPEED_HIGH (3 << 6)
+PAD_CTL_DSE_DISABLE (0 << 3)
+PAD_CTL_DSE_260ohm (1 << 3)
+PAD_CTL_DSE_130ohm (2 << 3)
+PAD_CTL_DSE_87ohm (3 << 3)
+PAD_CTL_DSE_65ohm (4 << 3)
+PAD_CTL_DSE_52ohm (5 << 3)
+PAD_CTL_DSE_43ohm (6 << 3)
+PAD_CTL_DSE_37ohm (7 << 3)
+PAD_CTL_SRE_FAST (1 << 0)
+PAD_CTL_SRE_SLOW (0 << 0)
+
+Refer to imx6sll-pinfunc.h in device tree source folder for all available
+imx6sll PIN_FUNC_ID.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6sx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sx-pinctrl.txt
new file mode 100644
index 0000000000..b1b595220f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6sx-pinctrl.txt
@@ -0,0 +1,36 @@
+* Freescale i.MX6 SoloX IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx6sx-iomuxc"
+- fsl,pins: each entry consists of 6 integers and represents the mux and config
+ setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val
+ input_val> are specified using a PIN_FUNC_ID macro, which can be found in
+ imx6sx-pinfunc.h under device tree source folder. The last integer CONFIG is
+ the pad setting value like pull-up on this pin. Please refer to i.MX6 SoloX
+ Reference Manual for detailed CONFIG settings.
+
+CONFIG bits definition:
+PAD_CTL_HYS (1 << 16)
+PAD_CTL_PUS_100K_DOWN (0 << 14)
+PAD_CTL_PUS_47K_UP (1 << 14)
+PAD_CTL_PUS_100K_UP (2 << 14)
+PAD_CTL_PUS_22K_UP (3 << 14)
+PAD_CTL_PUE (1 << 13)
+PAD_CTL_PKE (1 << 12)
+PAD_CTL_ODE (1 << 11)
+PAD_CTL_SPEED_LOW (0 << 6)
+PAD_CTL_SPEED_MED (1 << 6)
+PAD_CTL_SPEED_HIGH (3 << 6)
+PAD_CTL_DSE_DISABLE (0 << 3)
+PAD_CTL_DSE_260ohm (1 << 3)
+PAD_CTL_DSE_130ohm (2 << 3)
+PAD_CTL_DSE_87ohm (3 << 3)
+PAD_CTL_DSE_65ohm (4 << 3)
+PAD_CTL_DSE_52ohm (5 << 3)
+PAD_CTL_DSE_43ohm (6 << 3)
+PAD_CTL_DSE_37ohm (7 << 3)
+PAD_CTL_SRE_FAST (1 << 0)
+PAD_CTL_SRE_SLOW (0 << 0)
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt
new file mode 100644
index 0000000000..7ca4f6118d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6ul-pinctrl.txt
@@ -0,0 +1,37 @@
+* Freescale i.MX6 UltraLite IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,imx6ul-iomuxc" for main IOMUX controller or
+ "fsl,imx6ull-iomuxc-snvs" for i.MX 6ULL's SNVS IOMUX controller.
+- fsl,pins: each entry consists of 6 integers and represents the mux and config
+ setting for one pin. The first 5 integers <mux_reg conf_reg input_reg mux_val
+ input_val> are specified using a PIN_FUNC_ID macro, which can be found in
+ imx6ul-pinfunc.h under device tree source folder. The last integer CONFIG is
+ the pad setting value like pull-up on this pin. Please refer to i.MX6 UltraLite
+ Reference Manual for detailed CONFIG settings.
+
+CONFIG bits definition:
+PAD_CTL_HYS (1 << 16)
+PAD_CTL_PUS_100K_DOWN (0 << 14)
+PAD_CTL_PUS_47K_UP (1 << 14)
+PAD_CTL_PUS_100K_UP (2 << 14)
+PAD_CTL_PUS_22K_UP (3 << 14)
+PAD_CTL_PUE (1 << 13)
+PAD_CTL_PKE (1 << 12)
+PAD_CTL_ODE (1 << 11)
+PAD_CTL_SPEED_LOW (0 << 6)
+PAD_CTL_SPEED_MED (1 << 6)
+PAD_CTL_SPEED_HIGH (3 << 6)
+PAD_CTL_DSE_DISABLE (0 << 3)
+PAD_CTL_DSE_260ohm (1 << 3)
+PAD_CTL_DSE_130ohm (2 << 3)
+PAD_CTL_DSE_87ohm (3 << 3)
+PAD_CTL_DSE_65ohm (4 << 3)
+PAD_CTL_DSE_52ohm (5 << 3)
+PAD_CTL_DSE_43ohm (6 << 3)
+PAD_CTL_DSE_37ohm (7 << 3)
+PAD_CTL_SRE_FAST (1 << 0)
+PAD_CTL_SRE_SLOW (0 << 0)
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml
new file mode 100644
index 0000000000..7bd723ab12
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.yaml
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imx7d-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IMX7D IOMUX Controller
+
+maintainers:
+ - Dong Aisheng <aisheng.dong@nxp.com>
+
+description:
+ Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+ for common binding part and usage.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - fsl,imx7d-iomuxc
+ - fsl,imx7d-iomuxc-lpsr
+
+ reg:
+ maxItems: 1
+
+ fsl,input-sel:
+ description:
+ phandle for main iomuxc controller which shares the input select
+ register for daisy chain settings.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+# Client device subnode's properties
+patternProperties:
+ 'grp$':
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+
+ properties:
+ fsl,pins:
+ description:
+ each entry consists of 6 integers and represents the mux and config
+ setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+ mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+ be found in <arch/arm/boot/dts/imx7d-pinfunc.h>. The last integer
+ CONFIG is the pad setting value like pull-up on this pin. Please
+ refer to i.MX7D Reference Manual for detailed CONFIG settings.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ items:
+ - description: |
+ "mux_reg" indicates the offset of mux register.
+ - description: |
+ "conf_reg" indicates the offset of pad configuration register.
+ - description: |
+ "input_reg" indicates the offset of select input register.
+ - description: |
+ "mux_val" indicates the mux value to be applied.
+ - description: |
+ "input_val" indicates the select input value to be applied.
+ - description: |
+ "pad_setting" indicates the pad configuration value to be applied.
+
+ required:
+ - fsl,pins
+
+ additionalProperties: false
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx7d-iomuxc-lpsr
+
+then:
+ required:
+ - fsl,input-sel
+
+additionalProperties: false
+
+examples:
+ - |
+ iomuxc: pinctrl@30330000 {
+ compatible = "fsl,imx7d-iomuxc";
+ reg = <0x30330000 0x10000>;
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins =
+ <0x0160 0x03D0 0x0714 0x1 0x0 0x7e>,
+ <0x0164 0x03D4 0x0000 0x1 0x0 0x76>;
+ };
+ };
+ - |
+ iomuxc_lpsr: pinctrl@302c0000 {
+ compatible = "fsl,imx7d-iomuxc-lpsr";
+ reg = <0x302c0000 0x10000>;
+ fsl,input-sel = <&iomuxc>;
+
+ pinctrl_gpio_lpsr: gpio1-grp {
+ fsl,pins =
+ <0x0008 0x0038 0x0000 0x0 0x0 0x59>,
+ <0x000C 0x003C 0x0000 0x0 0x0 0x59>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-pinctrl.txt
new file mode 100644
index 0000000000..bfa3703a74
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx7ulp-pinctrl.txt
@@ -0,0 +1,53 @@
+* Freescale i.MX7ULP IOMUX Controller
+
+i.MX 7ULP has three IOMUXC instances: IOMUXC0 for M4 ports, IOMUXC1 for A7
+ports and IOMUXC DDR for DDR interface.
+
+Note:
+This binding doc is only for the IOMUXC1 support in A7 Domain and it only
+supports generic pin config.
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "fsl,imx7ulp-iomuxc1".
+- fsl,pins: Each entry consists of 5 integers which represents the mux
+ and config setting for one pin. The first 4 integers
+ <mux_conf_reg input_reg mux_mode input_val> are specified
+ using a PIN_FUNC_ID macro, which can be found in
+ imx7ulp-pinfunc.h in the device tree source folder.
+ The last integer CONFIG is the pad setting value like
+ pull-up on this pin.
+
+ Please refer to i.MX7ULP Reference Manual for detailed
+ CONFIG settings.
+
+CONFIG bits definition:
+PAD_CTL_OBE (1 << 17)
+PAD_CTL_IBE (1 << 16)
+PAD_CTL_LK (1 << 16)
+PAD_CTL_DSE_HI (1 << 6)
+PAD_CTL_DSE_STD (0 << 6)
+PAD_CTL_ODE (1 << 5)
+PAD_CTL_PUSH_PULL (0 << 5)
+PAD_CTL_SRE_SLOW (1 << 2)
+PAD_CTL_SRE_STD (0 << 2)
+PAD_CTL_PE (1 << 0)
+
+Examples:
+#include "imx7ulp-pinfunc.h"
+
+/* Pin Controller Node */
+iomuxc1: pinctrl@40ac0000 {
+ compatible = "fsl,imx7ulp-iomuxc1";
+ reg = <0x40ac0000 0x1000>;
+
+ /* Pin Configuration Node */
+ pinctrl_lpuart4: lpuart4grp {
+ fsl,pins = <
+ IMX7ULP_PAD_PTC3__LPUART4_RX 0x1
+ IMX7ULP_PAD_PTC2__LPUART4_TX 0x1
+ >;
+ };
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml
new file mode 100644
index 0000000000..6068be11df
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imx8m-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IMX8M IOMUX Controller
+
+maintainers:
+ - Peng Fan <peng.fan@nxp.com>
+
+description:
+ Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+ for common binding part and usage.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx8mm-iomuxc
+ - fsl,imx8mn-iomuxc
+ - fsl,imx8mp-iomuxc
+ - fsl,imx8mq-iomuxc
+
+ reg:
+ maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+ 'grp$':
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+
+ properties:
+ fsl,pins:
+ description:
+ each entry consists of 6 integers and represents the mux and config
+ setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+ mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+ be found in <arch/arm64/boot/dts/freescale/imx8m[m,n,p,q]-pinfunc.h>.
+ The last integer CONFIG is the pad setting value like pull-up on this
+ pin. Please refer to i.MX8M Mini/Nano/Plus/Quad Reference Manual for
+ detailed CONFIG settings.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ items:
+ - description: |
+ "mux_reg" indicates the offset of mux register.
+ - description: |
+ "conf_reg" indicates the offset of pad configuration register.
+ - description: |
+ "input_reg" indicates the offset of select input register.
+ - description: |
+ "mux_val" indicates the mux value to be applied.
+ - description: |
+ "input_val" indicates the select input value to be applied.
+ - description: |
+ "pad_setting" indicates the pad configuration value to be
+ applied.
+
+ required:
+ - fsl,pins
+
+ additionalProperties: false
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ # Pinmux controller node
+ - |
+ iomuxc: pinctrl@30330000 {
+ compatible = "fsl,imx8mm-iomuxc";
+ reg = <0x30330000 0x10000>;
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins =
+ <0x23C 0x4A4 0x4FC 0x0 0x0 0x140>,
+ <0x240 0x4A8 0x000 0x0 0x0 0x140>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml
new file mode 100644
index 0000000000..7dcf681271
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imx8ulp-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IMX8ULP IOMUX Controller
+
+maintainers:
+ - Jacky Bai <ping.bai@nxp.com>
+
+description:
+ Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+ for common binding part and usage.
+
+properties:
+ compatible:
+ const: fsl,imx8ulp-iomuxc1
+
+ reg:
+ maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+ 'grp$':
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+
+ properties:
+ fsl,pins:
+ description:
+ each entry consists of 5 integers and represents the mux and config
+ setting for one pin. The first 4 integers <mux_config_reg input_reg
+ mux_mode input_val> are specified using a PIN_FUNC_ID macro, which can
+ be found in <arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h>. The last
+ integer CONFIG is the pad setting value like pull-up on this pin. Please
+ refer to i.MX8ULP Reference Manual for detailed CONFIG settings.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ items:
+ - description: |
+ "mux_config_reg" indicates the offset of mux register.
+ - description: |
+ "input_reg" indicates the offset of select input register.
+ - description: |
+ "mux_mode" indicates the mux value to be applied.
+ - description: |
+ "input_val" indicates the select input value to be applied.
+ - description: |
+ "pad_setting" indicates the pad configuration value to be applied.
+
+ required:
+ - fsl,pins
+
+ additionalProperties: false
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ # Pinmux controller node
+ - |
+ iomuxc: pinctrl@298c0000 {
+ compatible = "fsl,imx8ulp-iomuxc1";
+ reg = <0x298c0000 0x10000>;
+
+ pinctrl_lpuart5: lpuart5grp {
+ fsl,pins =
+ <0x0138 0x08F0 0x4 0x3 0x3>,
+ <0x013C 0x08EC 0x4 0x3 0x3>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml
new file mode 100644
index 0000000000..2f24051029
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imx93-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IMX93 IOMUX Controller
+
+maintainers:
+ - Peng Fan <peng.fan@nxp.com>
+
+description:
+ Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+ for common binding part and usage.
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+properties:
+ compatible:
+ const: fsl,imx93-iomuxc
+
+ reg:
+ maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+ 'grp$':
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+
+ properties:
+ fsl,pins:
+ description:
+ each entry consists of 6 integers and represents the mux and config
+ setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+ mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+ be found in <arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h>. The last
+ integer CONFIG is the pad setting value like pull-up on this pin. Please
+ refer to i.MX8M Plus Reference Manual for detailed CONFIG settings.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ items:
+ - description: |
+ "mux_reg" indicates the offset of mux register.
+ - description: |
+ "conf_reg" indicates the offset of pad configuration register.
+ - description: |
+ "input_reg" indicates the offset of select input register.
+ - description: |
+ "mux_val" indicates the mux value to be applied.
+ - description: |
+ "input_val" indicates the select input value to be applied.
+ - description: |
+ "pad_setting" indicates the pad configuration value to be applied.
+
+
+ required:
+ - fsl,pins
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ # Pinmux controller node
+ - |
+ iomuxc: pinctrl@443c0000 {
+ compatible = "fsl,imx93-iomuxc";
+ reg = <0x30330000 0x10000>;
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins =
+ <0x48 0x1f8 0x41c 0x1 0x0 0x49>,
+ <0x4c 0x1fc 0x418 0x1 0x0 0x49>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.yaml
new file mode 100644
index 0000000000..db5fe66ad8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1050.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imxrt1050.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IMXRT1050 IOMUX Controller
+
+maintainers:
+ - Giulio Benetti <giulio.benetti@benettiengineering.com>
+ - Jesse Taube <Mr.Bossman075@gmail.com>
+
+description:
+ Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+ for common binding part and usage.
+
+properties:
+ compatible:
+ const: fsl,imxrt1050-iomuxc
+
+ reg:
+ maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+ 'grp$':
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+
+ properties:
+ fsl,pins:
+ description:
+ each entry consists of 6 integers and represents the mux and config
+ setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+ mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+ be found in <arch/arm/boot/dts/imxrt1050-pinfunc.h>. The last
+ integer CONFIG is the pad setting value like pull-up on this pin. Please
+ refer to i.MXRT1050 Reference Manual for detailed CONFIG settings.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ items:
+ - description: |
+ "mux_reg" indicates the offset of mux register.
+ - description: |
+ "conf_reg" indicates the offset of pad configuration register.
+ - description: |
+ "input_reg" indicates the offset of select input register.
+ - description: |
+ "mux_val" indicates the mux value to be applied.
+ - description: |
+ "input_val" indicates the select input value to be applied.
+ - description: |
+ "pad_setting" indicates the pad configuration value to be applied.
+
+ required:
+ - fsl,pins
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ iomuxc: iomuxc@401f8000 {
+ compatible = "fsl,imxrt1050-iomuxc";
+ reg = <0x401f8000 0x4000>;
+
+ pinctrl_lpuart1: lpuart1grp {
+ fsl,pins =
+ <0x0EC 0x2DC 0x000 0x2 0x0 0xf1>,
+ <0x0F0 0x2E0 0x000 0x2 0x0 0xf1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1170.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1170.yaml
new file mode 100644
index 0000000000..2e880b3e53
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imxrt1170.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imxrt1170.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MXRT1170 IOMUX Controller
+
+maintainers:
+ - Giulio Benetti <giulio.benetti@benettiengineering.com>
+ - Jesse Taube <Mr.Bossman075@gmail.com>
+
+description:
+ Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+ for common binding part and usage.
+
+properties:
+ compatible:
+ const: fsl,imxrt1170-iomuxc
+
+ reg:
+ maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+ 'grp$':
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+
+ properties:
+ fsl,pins:
+ description:
+ each entry consists of 6 integers and represents the mux and config
+ setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+ mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+ be found in <arch/arm/boot/dts/imxrt1170-pinfunc.h>. The last
+ integer CONFIG is the pad setting value like pull-up on this pin. Please
+ refer to i.MXRT1170 Reference Manual for detailed CONFIG settings.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ items:
+ - description: |
+ "mux_reg" indicates the offset of mux register.
+ - description: |
+ "conf_reg" indicates the offset of pad configuration register.
+ - description: |
+ "input_reg" indicates the offset of select input register.
+ - description: |
+ "mux_val" indicates the mux value to be applied.
+ - description: |
+ "input_val" indicates the select input value to be applied.
+ - description: |
+ "pad_setting" indicates the pad configuration value to be applied.
+ required:
+ - fsl,pins
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ iomuxc: iomuxc@400e8000 {
+ compatible = "fsl,imxrt1170-iomuxc";
+ reg = <0x400e8000 0x4000>;
+ pinctrl_lpuart1: lpuart1grp {
+ fsl,pins =
+ <0x16C 0x3B0 0x620 0x0 0x0 0xf1>,
+ <0x170 0x3B4 0x61C 0x0 0x0 0xf1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt
new file mode 100644
index 0000000000..1e70a8aff2
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt
@@ -0,0 +1,127 @@
+* Freescale MXS Pin Controller
+
+The pins controlled by mxs pin controller are organized in banks, each bank
+has 32 pins. Each pin has 4 multiplexing functions, and generally, the 4th
+function is GPIO. The configuration on the pins includes drive strength,
+voltage and pull-up.
+
+Required properties:
+- compatible: "fsl,imx23-pinctrl" or "fsl,imx28-pinctrl"
+- reg: Should contain the register physical address and length for the
+ pin controller.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices.
+
+The node of mxs pin controller acts as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for
+a group of pins, and only affects those parameters that are explicitly listed.
+In other words, a subnode that describes a drive strength parameter implies no
+information about pull-up. For this reason, even seemingly boolean values are
+actually tristates in this binding: unspecified, off, or on. Unspecified is
+represented as an absent property, and off/on are represented as integer
+values 0 and 1.
+
+Those subnodes under mxs pin controller node will fall into two categories.
+One is to set up a group of pins for a function, both mux selection and pin
+configurations, and it's called group node in the binding document. The other
+one is to adjust the pin configuration for some particular pins that need a
+different configuration than what is defined in group node. The binding
+document calls this type of node config node.
+
+On mxs, there is no hardware pin group. The pin group in this binding only
+means a group of pins put together for particular peripheral to work in
+particular function, like SSP0 functioning as mmc0-8bit. That said, the
+group node should include all the pins needed for one function rather than
+having these pins defined in several group nodes. It also means each of
+"pinctrl-*" phandle in client device node should only have one group node
+pointed in there, while the phandle can have multiple config node referenced
+there to adjust configurations for some pins in the group.
+
+Required subnode-properties:
+- fsl,pinmux-ids: An integer array. Each integer in the array specify a pin
+ with given mux function, with bank, pin and mux packed as below.
+
+ [15..12] : bank number
+ [11..4] : pin number
+ [3..0] : mux selection
+
+ This integer with mux selection packed is used as an entity by both group
+ and config nodes to identify a pin. The mux selection in the integer takes
+ effects only on group node, and will get ignored by driver with config node,
+ since config node is only meant to set up pin configurations.
+
+ Valid values for these integers are listed below.
+
+- reg: Should be the index of the group nodes for same function. This property
+ is required only for group nodes, and should not be present in any config
+ nodes.
+
+Optional subnode-properties:
+- fsl,drive-strength: Integer.
+ 0: MXS_DRIVE_4mA
+ 1: MXS_DRIVE_8mA
+ 2: MXS_DRIVE_12mA
+ 3: MXS_DRIVE_16mA
+- fsl,voltage: Integer.
+ 0: MXS_VOLTAGE_LOW - 1.8 V
+ 1: MXS_VOLTAGE_HIGH - 3.3 V
+- fsl,pull-up: Integer.
+ 0: MXS_PULL_DISABLE - Disable the internal pull-up
+ 1: MXS_PULL_ENABLE - Enable the internal pull-up
+
+Note that when enabling the pull-up, the internal pad keeper gets disabled.
+Also, some pins doesn't have a pull up, in that case, setting the fsl,pull-up
+will only disable the internal pad keeper.
+
+Examples:
+
+pinctrl@80018000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx28-pinctrl";
+ reg = <0x80018000 2000>;
+
+ mmc0_8bit_pins_a: mmc0-8bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX28_PAD_SSP0_DATA0__SSP0_D0
+ MX28_PAD_SSP0_DATA1__SSP0_D1
+ MX28_PAD_SSP0_DATA2__SSP0_D2
+ MX28_PAD_SSP0_DATA3__SSP0_D3
+ MX28_PAD_SSP0_DATA4__SSP0_D4
+ MX28_PAD_SSP0_DATA5__SSP0_D5
+ MX28_PAD_SSP0_DATA6__SSP0_D6
+ MX28_PAD_SSP0_DATA7__SSP0_D7
+ MX28_PAD_SSP0_CMD__SSP0_CMD
+ MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
+ MX28_PAD_SSP0_SCK__SSP0_SCK
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ mmc_cd_cfg: mmc-cd-cfg {
+ fsl,pinmux-ids = <MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
+ mmc_sck_cfg: mmc-sck-cfg {
+ fsl,pinmux-ids = <MX28_PAD_SSP0_SCK__SSP0_SCK>;
+ fsl,drive-strength = <MXS_DRIVE_12mA>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+};
+
+In this example, group node mmc0-8bit defines a group of pins for mxs SSP0
+to function as a 8-bit mmc device, with 8mA, 3.3V and pull-up configurations
+applied on all these pins. And config nodes mmc-cd-cfg and mmc-sck-cfg are
+adjusting the configuration for pins card-detection and clock from what group
+node mmc0-8bit defines. Only the configuration properties to be adjusted need
+to be listed in the config nodes.
+
+Valid values for i.MX28/i.MX23 pinmux-id are defined in
+arch/arm/boot/dts/imx28-pinfunc.h and arch/arm/boot/dts/imx23-pinfunc.h.
+The definitions for the padconfig properties can be found in
+arch/arm/boot/dts/mxs-pinfunc.h.
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,scu-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,scu-pinctrl.yaml
new file mode 100644
index 0000000000..fcd729afee
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,scu-pinctrl.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,scu-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - Pinctrl Based on SCU Message Protocol
+
+maintainers:
+ - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: i.MX SCU Client Device Node
+ Client nodes are maintained as children of the relevant IMX-SCU device node.
+ This binding uses the i.MX common pinctrl binding.
+ (Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt)
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx8qm-iomuxc
+ - fsl,imx8qxp-iomuxc
+ - fsl,imx8dxl-iomuxc
+
+patternProperties:
+ 'grp$':
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+
+ properties:
+ fsl,pins:
+ description:
+ each entry consists of 3 integers and represents the pin ID, the mux value
+ and pad setting for the pin. The first 2 integers - pin_id and mux_val - are
+ specified using a PIN_FUNC_ID macro, which can be found in
+ <include/dt-bindings/pinctrl/pads-imx8qxp.h>. The last integer is
+ the pad setting value like pull-up on this pin. Please refer to the
+ appropriate i.MX8 Reference Manual for detailed pad CONFIG settings.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ items:
+ - description: |
+ "pin_id" indicates the pin ID
+ - description: |
+ "mux_val" indicates the mux value to be applied.
+ - description: |
+ "pad_setting" indicates the pad configuration value to be applied.
+
+ required:
+ - fsl,pins
+
+ additionalProperties: false
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ pinctrl {
+ compatible = "fsl,imx8qxp-iomuxc";
+
+ pinctrl_lpuart0: lpuart0grp {
+ fsl,pins = <
+ 111 0 0x06000020
+ 112 0 0x06000020
+ >;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,vf610-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,vf610-pinctrl.txt
new file mode 100644
index 0000000000..ddcdeb697c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,vf610-pinctrl.txt
@@ -0,0 +1,41 @@
+Freescale Vybrid VF610 IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: "fsl,vf610-iomuxc"
+- fsl,pins: two integers array, represents a group of pins mux and config
+ setting. The format is fsl,pins = <PIN_FUNC_ID CONFIG>, PIN_FUNC_ID is
+ a pin working on a specific function, CONFIG is the pad setting value
+ such as pull-up, speed, ode for this pin. Please refer to Vybrid VF610
+ datasheet for the valid pad config settings.
+
+CONFIG bits definition:
+PAD_CTL_SPEED_LOW (1 << 12)
+PAD_CTL_SPEED_MED (2 << 12)
+PAD_CTL_SPEED_HIGH (3 << 12)
+PAD_CTL_SRE_FAST (1 << 11)
+PAD_CTL_SRE_SLOW (0 << 11)
+PAD_CTL_ODE (1 << 10)
+PAD_CTL_HYS (1 << 9)
+PAD_CTL_DSE_DISABLE (0 << 6)
+PAD_CTL_DSE_150ohm (1 << 6)
+PAD_CTL_DSE_75ohm (2 << 6)
+PAD_CTL_DSE_50ohm (3 << 6)
+PAD_CTL_DSE_37ohm (4 << 6)
+PAD_CTL_DSE_30ohm (5 << 6)
+PAD_CTL_DSE_25ohm (6 << 6)
+PAD_CTL_DSE_20ohm (7 << 6)
+PAD_CTL_PUS_100K_DOWN (0 << 4)
+PAD_CTL_PUS_47K_UP (1 << 4)
+PAD_CTL_PUS_100K_UP (2 << 4)
+PAD_CTL_PUS_22K_UP (3 << 4)
+PAD_CTL_PKE (1 << 3)
+PAD_CTL_PUE (1 << 2)
+PAD_CTL_OBE_ENABLE (1 << 1)
+PAD_CTL_IBE_ENABLE (1 << 0)
+PAD_CTL_OBE_IBE_ENABLE (3 << 0)
+
+Please refer to vf610-pinfunc.h in device tree source folder
+for all available PIN_FUNC_ID for Vybrid VF610.
diff --git a/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt
new file mode 100644
index 0000000000..a72dc31781
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt
@@ -0,0 +1,217 @@
+Imagination Technologies Pistachio SoC pin controllers
+======================================================
+
+The pin controllers on Pistachio are a combined GPIO controller, (GPIO)
+interrupt controller, and pinmux + pinconf device. The system ("east") pin
+controller on Pistachio has 99 pins, 90 of which are MFIOs which can be
+configured as GPIOs. The 90 GPIOs are divided into 6 banks of up to 16 GPIOs
+each. The GPIO banks are represented as sub-nodes of the pad controller node.
+
+Please refer to pinctrl-bindings.txt, ../gpio/gpio.txt, and
+../interrupt-controller/interrupts.txt for generic information regarding
+pin controller, GPIO, and interrupt bindings.
+
+Required properties for pin controller node:
+--------------------------------------------
+ - compatible: "img,pistachio-system-pinctrl".
+ - reg: Address range of the pinctrl registers.
+
+Required properties for GPIO bank sub-nodes:
+--------------------------------------------
+ - interrupts: Interrupt line for the GPIO bank.
+ - gpio-controller: Indicates the device is a GPIO controller.
+ - #gpio-cells: Must be two. The first cell is the GPIO pin number and the
+ second cell indicates the polarity. See <dt-bindings/gpio/gpio.h> for
+ a list of possible values.
+ - interrupt-controller: Indicates the device is an interrupt controller.
+ - #interrupt-cells: Must be two. The first cell is the GPIO pin number and
+ the second cell encodes the interrupt flags. See
+ <dt-bindings/interrupt-controller/irq.h> for a list of valid flags.
+
+Note that the N GPIO bank sub-nodes *must* be named gpio0, gpio1, ... gpioN-1.
+
+Required properties for pin configuration sub-nodes:
+----------------------------------------------------
+ - pins: List of pins to which the configuration applies. See below for a
+ list of possible pins.
+
+Optional properties for pin configuration sub-nodes:
+----------------------------------------------------
+ - function: Mux function for the specified pins. This is not applicable for
+ non-MFIO pins. See below for a list of valid functions for each pin.
+ - bias-high-impedance: Enable high-impedance mode.
+ - bias-pull-up: Enable weak pull-up.
+ - bias-pull-down: Enable weak pull-down.
+ - bias-bus-hold: Enable bus-keeper mode.
+ - drive-strength: Drive strength in mA. Supported values: 2, 4, 8, 12.
+ - input-schmitt-enable: Enable Schmitt trigger.
+ - input-schmitt-disable: Disable Schmitt trigger.
+ - slew-rate: Slew rate control. 0 for slow, 1 for fast.
+
+Pin Functions
+--- ---------
+mfio0 spim1
+mfio1 spim1, spim0, uart1
+mfio2 spim1, spim0, uart1
+mfio3 spim1
+mfio4 spim1
+mfio5 spim1
+mfio6 spim1
+mfio7 spim1
+mfio8 spim0
+mfio9 spim0
+mfio10 spim0
+mfio11 spis
+mfio12 spis
+mfio13 spis
+mfio14 spis
+mfio15 sdhost, mips_trace_clk, mips_trace_data
+mfio16 sdhost, mips_trace_dint, mips_trace_data
+mfio17 sdhost, mips_trace_trigout, mips_trace_data
+mfio18 sdhost, mips_trace_trigin, mips_trace_data
+mfio19 sdhost, mips_trace_dm, mips_trace_data
+mfio20 sdhost, mips_trace_probe_n, mips_trace_data
+mfio21 sdhost, mips_trace_data
+mfio22 sdhost, mips_trace_data
+mfio23 sdhost
+mfio24 sdhost
+mfio25 sdhost
+mfio26 sdhost
+mfio27 sdhost
+mfio28 i2c0, spim0
+mfio29 i2c0, spim0
+mfio30 i2c1, spim0
+mfio31 i2c1, spim1
+mfio32 i2c2
+mfio33 i2c2
+mfio34 i2c3
+mfio35 i2c3
+mfio36 i2s_out, audio_clk_in
+mfio37 i2s_out, debug_raw_cca_ind
+mfio38 i2s_out, debug_ed_sec20_cca_ind
+mfio39 i2s_out, debug_ed_sec40_cca_ind
+mfio40 i2s_out, debug_agc_done_0
+mfio41 i2s_out, debug_agc_done_1
+mfio42 i2s_out, debug_ed_cca_ind
+mfio43 i2s_out, debug_s2l_done
+mfio44 i2s_out
+mfio45 i2s_dac_clk, audio_sync
+mfio46 audio_trigger
+mfio47 i2s_in
+mfio48 i2s_in
+mfio49 i2s_in
+mfio50 i2s_in
+mfio51 i2s_in
+mfio52 i2s_in
+mfio53 i2s_in
+mfio54 i2s_in, spdif_in
+mfio55 uart0, spim0, spim1
+mfio56 uart0, spim0, spim1
+mfio57 uart0, spim0, spim1
+mfio58 uart0, spim1
+mfio59 uart1
+mfio60 uart1
+mfio61 spdif_out
+mfio62 spdif_in
+mfio63 eth, mips_trace_clk, mips_trace_data
+mfio64 eth, mips_trace_dint, mips_trace_data
+mfio65 eth, mips_trace_trigout, mips_trace_data
+mfio66 eth, mips_trace_trigin, mips_trace_data
+mfio67 eth, mips_trace_dm, mips_trace_data
+mfio68 eth, mips_trace_probe_n, mips_trace_data
+mfio69 eth, mips_trace_data
+mfio70 eth, mips_trace_data
+mfio71 eth
+mfio72 ir
+mfio73 pwmpdm, mips_trace_clk, sram_debug
+mfio74 pwmpdm, mips_trace_dint, sram_debug
+mfio75 pwmpdm, mips_trace_trigout, rom_debug
+mfio76 pwmpdm, mips_trace_trigin, rom_debug
+mfio77 mdc_debug, mips_trace_dm, rpu_debug
+mfio78 mdc_debug, mips_trace_probe_n, rpu_debug
+mfio79 ddr_debug, mips_trace_data, mips_debug
+mfio80 ddr_debug, mips_trace_data, mips_debug
+mfio81 dreq0, mips_trace_data, eth_debug
+mfio82 dreq1, mips_trace_data, eth_debug
+mfio83 mips_pll_lock, mips_trace_data, usb_debug
+mfio84 audio_pll_lock, mips_trace_data, usb_debug
+mfio85 rpu_v_pll_lock, mips_trace_data, sdhost_debug
+mfio86 rpu_l_pll_lock, mips_trace_data, sdhost_debug
+mfio87 sys_pll_lock, dreq2, socif_debug
+mfio88 wifi_pll_lock, dreq3, socif_debug
+mfio89 bt_pll_lock, dreq4, dreq5
+tck
+trstn
+tdi
+tms
+tdo
+jtag_comply
+safe_mode
+por_disable
+resetn
+
+Example:
+--------
+pinctrl@18101c00 {
+ compatible = "img,pistachio-system-pinctrl";
+ reg = <0x18101C00 0x400>;
+
+ gpio0: gpio0 {
+ interrupts = <GIC_SHARED 71 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ ...
+
+ gpio5: gpio5 {
+ interrupts = <GIC_SHARED 76 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ ...
+
+ uart0_xfer: uart0-xfer {
+ uart0-rxd {
+ pins = "mfio55";
+ function = "uart0";
+ };
+ uart0-txd {
+ pins = "mfio56";
+ function = "uart0";
+ };
+ };
+
+ uart0_rts_cts: uart0-rts-cts {
+ uart0-rts {
+ pins = "mfio57";
+ function = "uart0";
+ };
+ uart0-cts {
+ pins = "mfio58";
+ function = "uart0";
+ };
+ };
+};
+
+uart@... {
+ ...
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer>, <&uart0_rts_cts>;
+ ...
+};
+
+usb_vbus: fixed-regulator {
+ ...
+ gpio = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+ ...
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml
new file mode 100644
index 0000000000..890961826c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml
@@ -0,0 +1,189 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ingenic,pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs pin controller
+
+description: >
+ Please refer to pinctrl-bindings.txt in this directory for details of the
+ common pinctrl bindings used by client devices, including the meaning of the
+ phrase "pin configuration node".
+
+ For the Ingenic SoCs, pin control is tightly bound with GPIO ports. All pins
+ may be used as GPIOs, multiplexed device functions are configured within the
+ GPIO port configuration registers and it is typical to refer to pins using the
+ naming scheme "PxN" where x is a character identifying the GPIO port with
+ which the pin is associated and N is an integer from 0 to 31 identifying the
+ pin within that GPIO port. For example PA0 is the first pin in GPIO port A,
+ and PB31 is the last pin in GPIO port B. The JZ4730, the JZ4740, the JZ4725B,
+ the X1000 and the X1830 contains 4 GPIO ports, PA to PD, for a total of 128
+ pins. The X2000 and the X2100 contains 5 GPIO ports, PA to PE, for a total of
+ 160 pins. The JZ4750, the JZ4755 the JZ4760, the JZ4770 and the JZ4780 contains
+ 6 GPIO ports, PA to PF, for a total of 192 pins. The JZ4775 contains 7 GPIO
+ ports, PA to PG, for a total of 224 pins.
+
+maintainers:
+ - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - ingenic,jz4730-pinctrl
+ - ingenic,jz4740-pinctrl
+ - ingenic,jz4725b-pinctrl
+ - ingenic,jz4750-pinctrl
+ - ingenic,jz4755-pinctrl
+ - ingenic,jz4760-pinctrl
+ - ingenic,jz4770-pinctrl
+ - ingenic,jz4775-pinctrl
+ - ingenic,jz4780-pinctrl
+ - ingenic,x1000-pinctrl
+ - ingenic,x1500-pinctrl
+ - ingenic,x1830-pinctrl
+ - ingenic,x2000-pinctrl
+ - ingenic,x2100-pinctrl
+ - items:
+ - const: ingenic,jz4760b-pinctrl
+ - const: ingenic,jz4760-pinctrl
+ - items:
+ - const: ingenic,x1000e-pinctrl
+ - const: ingenic,x1000-pinctrl
+ - items:
+ - const: ingenic,x2000e-pinctrl
+ - const: ingenic,x2000-pinctrl
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "^gpio@[0-9]$":
+ type: object
+ properties:
+ compatible:
+ enum:
+ - ingenic,jz4730-gpio
+ - ingenic,jz4740-gpio
+ - ingenic,jz4725b-gpio
+ - ingenic,jz4750-gpio
+ - ingenic,jz4755-gpio
+ - ingenic,jz4760-gpio
+ - ingenic,jz4770-gpio
+ - ingenic,jz4775-gpio
+ - ingenic,jz4780-gpio
+ - ingenic,x1000-gpio
+ - ingenic,x1500-gpio
+ - ingenic,x1830-gpio
+ - ingenic,x2000-gpio
+ - ingenic,x2100-gpio
+
+ reg:
+ items:
+ - description: The GPIO bank number
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+ description:
+ Refer to ../interrupt-controller/interrupts.txt for more details.
+
+ interrupts:
+ maxItems: 1
+
+ required:
+ - compatible
+ - reg
+ - gpio-controller
+ - "#gpio-cells"
+ - interrupts
+ - interrupt-controller
+ - "#interrupt-cells"
+
+ additionalProperties: false
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties:
+ anyOf:
+ - type: object
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+ properties:
+ function: true
+ groups: true
+ pins: true
+ bias-disable: true
+ bias-pull-up: true
+ bias-pull-down: true
+ output-low: true
+ output-high: true
+ additionalProperties: false
+
+ - type: object
+ additionalProperties:
+ type: object
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+ properties:
+ function: true
+ groups: true
+ pins: true
+ bias-disable: true
+ bias-pull-up: true
+ bias-pull-down: true
+ output-low: true
+ output-high: true
+ additionalProperties: false
+
+examples:
+ - |
+ pinctrl@10010000 {
+ compatible = "ingenic,jz4770-pinctrl";
+ reg = <0x10010000 0x600>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio@0 {
+ compatible = "ingenic,jz4770-gpio";
+ reg = <0>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 32>;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <17>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml b/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml
new file mode 100644
index 0000000000..1144ca2896
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/intel,lgm-io.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/intel,lgm-io.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Lightning Mountain SoC pinmux & GPIO controller
+
+maintainers:
+ - Rahul Tanwar <rahul.tanwar@linux.intel.com>
+
+description: |
+ Pinmux & GPIO controller controls pin multiplexing & configuration including
+ GPIO function selection & GPIO attributes configuration.
+
+properties:
+ compatible:
+ const: intel,lgm-io
+
+ reg:
+ maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+ '-pins$':
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: pinmux-node.yaml#
+
+ properties:
+ function: true
+ groups: true
+ pins: true
+ pinmux: true
+ bias-pull-up: true
+ bias-pull-down: true
+ drive-strength: true
+ slew-rate: true
+ drive-open-drain: true
+ output-enable: true
+
+ required:
+ - function
+ - groups
+
+ additionalProperties: false
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ # Pinmux controller node
+ - |
+ pinctrl: pinctrl@e2880000 {
+ compatible = "intel,lgm-io";
+ reg = <0xe2880000 0x100000>;
+
+ uart0-pins {
+ pins = <64>, /* UART_RX0 */
+ <65>; /* UART_TX0 */
+ function = "CONSOLE_UART0";
+ pinmux = <1>,
+ <1>;
+ groups = "CONSOLE_UART0";
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/intel,pinctrl-keembay.yaml b/Documentation/devicetree/bindings/pinctrl/intel,pinctrl-keembay.yaml
new file mode 100644
index 0000000000..005d95a9e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/intel,pinctrl-keembay.yaml
@@ -0,0 +1,136 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/intel,pinctrl-keembay.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Keem Bay pin controller
+
+maintainers:
+ - Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
+
+description: |
+ Intel Keem Bay SoC integrates a pin controller which enables control
+ of pin directions, input/output values and configuration
+ for a total of 80 pins.
+
+properties:
+ compatible:
+ const: intel,keembay-pinctrl
+
+ reg:
+ maxItems: 2
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ ngpios:
+ description: The number of GPIOs exposed.
+ const: 80
+
+ interrupts:
+ description:
+ Specifies the interrupt lines to be used by the controller.
+ Each interrupt line is shared by upto 4 GPIO lines.
+ maxItems: 8
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+patternProperties:
+ '^gpio@[0-9a-f]*$':
+ type: object
+ additionalProperties: false
+
+ description:
+ Child nodes can be specified to contain pin configuration information,
+ which can then be utilized by pinctrl client devices.
+ The following properties are supported.
+
+ properties:
+ pins:
+ description: |
+ The name(s) of the pins to be configured in the child node.
+ Supported pin names are "GPIO0" up to "GPIO79".
+
+ bias-disable: true
+
+ bias-pull-down: true
+
+ bias-pull-up: true
+
+ drive-strength:
+ description: IO pads drive strength in milli Ampere.
+ enum: [2, 4, 8, 12]
+
+ bias-bus-hold:
+ type: boolean
+
+ input-schmitt-enable:
+ type: boolean
+
+ slew-rate:
+ description: GPIO slew rate control.
+ 0 - Fast(~100MHz)
+ 1 - Slow(~50MHz)
+ enum: [0, 1]
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - ngpios
+ - '#gpio-cells'
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ // Example 1
+ gpio@0 {
+ compatible = "intel,keembay-pinctrl";
+ reg = <0x600b0000 0x88>,
+ <0x600b0190 0x1ac>;
+ gpio-controller;
+ ngpios = <0x50>;
+ #gpio-cells = <0x2>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ // Example 2
+ gpio@1 {
+ compatible = "intel,keembay-pinctrl";
+ reg = <0x600c0000 0x88>,
+ <0x600c0190 0x1ac>;
+ gpio-controller;
+ ngpios = <0x50>;
+ #gpio-cells = <0x2>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-falcon.txt b/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-falcon.txt
new file mode 100644
index 0000000000..ac4da9fe07
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-falcon.txt
@@ -0,0 +1,83 @@
+Lantiq FALCON pinmux controller
+
+Required properties:
+- compatible: "lantiq,pinctrl-falcon"
+- reg: Should contain the physical address and length of the gpio/pinmux
+ register range
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Lantiq's pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those group(s), and two pin configuration parameters:
+pull-up and open-drain
+
+The name of each subnode is not important as long as it is unique; all subnodes
+should be enumerated and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+We support 2 types of nodes.
+
+Definition of mux function groups:
+
+Required subnode-properties:
+- lantiq,groups : An array of strings. Each string contains the name of a group.
+ Valid values for these names are listed below.
+- lantiq,function: A string containing the name of the function to mux to the
+ group. Valid values for function names are listed below.
+
+Valid values for group and function names:
+
+ mux groups:
+ por, ntr, ntr8k, hrst, mdio, bootled, asc0, spi, spi cs0, spi cs1, i2c,
+ jtag, slic, pcm, asc1
+
+ functions:
+ rst, ntr, mdio, led, asc, spi, i2c, jtag, slic, pcm
+
+
+Definition of pin configurations:
+
+Required subnode-properties:
+- lantiq,pins : An array of strings. Each string contains the name of a pin.
+ Valid values for these names are listed below.
+
+Optional subnode-properties:
+- lantiq,pull: Integer, representing the pull-down/up to apply to the pin.
+ 0: none, 1: down
+- lantiq,drive-current: Boolean, enables drive-current
+- lantiq,slew-rate: Boolean, enables slew-rate
+
+Example:
+ pinmux0 {
+ compatible = "lantiq,pinctrl-falcon";
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ asc0 {
+ lantiq,groups = "asc0";
+ lantiq,function = "asc";
+ };
+ ntr {
+ lantiq,groups = "ntr8k";
+ lantiq,function = "ntr";
+ };
+ i2c {
+ lantiq,groups = "i2c";
+ lantiq,function = "i2c";
+ };
+ hrst {
+ lantiq,groups = "hrst";
+ lantiq,function = "rst";
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt b/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt
new file mode 100644
index 0000000000..6bd9bc61be
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/lantiq,pinctrl-xway.txt
@@ -0,0 +1,158 @@
+Lantiq XWAY pinmux controller
+
+Required properties:
+- compatible: "lantiq,<chip>-pinctrl", where <chip> is:
+ "ase" (XWAY AMAZON Family)
+ "danube" (XWAY DANUBE Family)
+ "xrx100" (XWAY xRX100 Family)
+ "xrx200" (XWAY xRX200 Family)
+ "xrx300" (XWAY xRX300 Family)
+- reg: Should contain the physical address and length of the gpio/pinmux
+ register range
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Lantiq's pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those group(s), and two pin configuration parameters:
+pull-up and open-drain
+
+The name of each subnode is not important as long as it is unique; all subnodes
+should be enumerated and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+We support 2 types of nodes.
+
+Definition of mux function groups:
+
+Required subnode-properties:
+- lantiq,groups : An array of strings. Each string contains the name of a group.
+ Valid values for these names are listed below.
+- lantiq,function: A string containing the name of the function to mux to the
+ group. Valid values for function names are listed below.
+
+Valid values for group and function names:
+
+AMAZON:
+ mux groups:
+ exin0, exin1, exin2, jtag, spi_di, spi_do, spi_clk, spi_cs1, spi_cs2,
+ spi_cs3, spi_cs4, spi_cs5, spi_cs6, asc, stp, gpt1, gpt2, gpt3, clkout0,
+ clkout1, clkout2, mdio, dfe led0, dfe led1, ephy led0, ephy led1, ephy led2
+
+ functions:
+ spi, asc, cgu, jtag, exin, stp, gpt, mdio, ephy, dfe
+
+DANUBE:
+ mux groups:
+ exin0, exin1, exin2, jtag, ebu a23, ebu a24, ebu a25, ebu clk, ebu cs1,
+ ebu wait, nand ale, nand cs1, nand cle, spi_di, spi_do, spi_clk, spi_cs1,
+ spi_cs2, spi_cs3, spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi,
+ gpt1, gpt2, gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3,
+ req1, req2, req3, dfe led0, dfe led1
+
+ functions:
+ spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, dfe
+
+xRX100:
+ mux groups:
+ exin0, exin1, exin2, exin3, exin4, ebu a23, ebu a24, ebu a25, ebu clk,
+ ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, nand rd,
+ spi_di, spi_do, spi_clk, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5,
+ spi_cs6, asc0, asc0 cts rts, stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1,
+ clkout2, clkout3, gnt1, gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio,
+ dfe led0, dfe led1
+
+ functions:
+ spi, asc, cgu, exin, stp, gpt, nmi, pci, ebu, mdio, dfe
+
+xRX200:
+ mux groups:
+ exin0, exin1, exin2, exin3, exin4, ebu a23, ebu a24, ebu a25, ebu clk,
+ ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, nand rd,
+ spi_di, spi_do, spi_clk, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5,
+ spi_cs6, usif uart_rx, usif uart_tx, usif uart_rts, usif uart_cts,
+ usif uart_dtr, usif uart_dsr, usif uart_dcd, usif uart_ri, usif spi_di,
+ usif spi_do, usif spi_clk, usif spi_cs0, usif spi_cs1, usif spi_cs2,
+ stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1, clkout2, clkout3, gnt1,
+ gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio, dfe led0, dfe led1,
+ gphy0 led0, gphy0 led1, gphy0 led2, gphy1 led0, gphy1 led1, gphy1 led2
+
+ functions:
+ spi, usif, cgu, exin, stp, gpt, nmi, pci, ebu, mdio, dfe, gphy
+
+xRX300:
+ mux groups:
+ exin0, exin1, exin2, exin4, nand ale, nand cs0, nand cs1, nand cle,
+ nand rdy, nand rd, nand_d0, nand_d1, nand_d2, nand_d3, nand_d4, nand_d5,
+ nand_d6, nand_d7, nand_d1, nand wr, nand wp, nand se, spi_di, spi_do,
+ spi_clk, spi_cs1, spi_cs4, spi_cs6, usif uart_rx, usif uart_tx,
+ usif spi_di, usif spi_do, usif spi_clk, usif spi_cs0, stp, clkout2,
+ mdio, dfe led0, dfe led1, ephy0 led0, ephy0 led1, ephy1 led0, ephy1 led1
+
+ functions:
+ spi, usif, cgu, exin, stp, ebu, mdio, dfe, ephy
+
+
+Definition of pin configurations:
+
+Required subnode-properties:
+- lantiq,pins : An array of strings. Each string contains the name of a pin.
+ Valid values for these names are listed below.
+
+Optional subnode-properties:
+- lantiq,pull: Integer, representing the pull-down/up to apply to the pin.
+ 0: none, 1: down, 2: up.
+- lantiq,open-drain: Boolean, enables open-drain on the defined pin.
+
+Valid values for AMAZON pin names:
+ Pinconf pins can be referenced via the names io0-io31.
+
+Valid values for DANUBE pin names:
+ Pinconf pins can be referenced via the names io0-io31.
+
+Valid values for xRX100 pin names:
+ Pinconf pins can be referenced via the names io0-io55.
+
+Valid values for xRX200 pin names:
+ Pinconf pins can be referenced via the names io0-io49.
+
+Valid values for xRX300 pin names:
+ Pinconf pins can be referenced via the names io0-io1,io3-io6,io8-io11,
+ io13-io19,io23-io27,io34-io36,
+ io42-io43,io48-io61.
+
+Example:
+ gpio: pinmux@e100b10 {
+ compatible = "lantiq,danube-pinctrl";
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+ reg = <0xE100B10 0xA0>;
+
+ state_default: pinmux {
+ stp {
+ lantiq,groups = "stp";
+ lantiq,function = "stp";
+ };
+ pci {
+ lantiq,groups = "gnt1";
+ lantiq,function = "pci";
+ };
+ conf_out {
+ lantiq,pins = "io4", "io5", "io6"; /* stp */
+ lantiq,open-drain;
+ lantiq,pull = <0>;
+ };
+ };
+ };
+
diff --git a/Documentation/devicetree/bindings/pinctrl/loongson,ls2k-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/loongson,ls2k-pinctrl.yaml
new file mode 100644
index 0000000000..bd8a458435
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/loongson,ls2k-pinctrl.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/loongson,ls2k-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson-2 SoC Pinctrl Controller
+
+maintainers:
+ - zhanghongchen <zhanghongchen@loongson.cn>
+ - Yinbo Zhu <zhuyinbo@loongson.cn>
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+properties:
+ compatible:
+ const: loongson,ls2k-pinctrl
+
+ reg:
+ maxItems: 1
+
+patternProperties:
+ '-pins$':
+ type: object
+
+ additionalProperties: false
+
+ patternProperties:
+ 'pinmux$':
+ type: object
+ description: node for pinctrl.
+ $ref: pinmux-node.yaml#
+
+ unevaluatedProperties: false
+
+ properties:
+ groups:
+ description:
+ One or more groups of pins to mux to a certain function
+ items:
+ enum: [gpio, sdio, can1, can0, pwm3, pwm2, pwm1, pwm0, i2c1, i2c0,
+ nand, sata_led, i2s, hda]
+ function:
+ description:
+ The function that a group of pins is muxed to
+ enum: [gpio, sdio, can1, can0, pwm3, pwm2, pwm1, pwm0, i2c1, i2c0,
+ nand, sata_led, i2s, hda]
+
+ required:
+ - groups
+ - function
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ pctrl: pinctrl@1fe00420 {
+ compatible = "loongson,ls2k-pinctrl";
+ reg = <0x1fe00420 0x18>;
+ sdio_pins_default: sdio-pins {
+ sdio-pinmux {
+ groups = "sdio";
+ function = "sdio";
+ };
+
+ sdio-det-pinmux {
+ groups = "pwm2";
+ function = "gpio";
+ };
+ };
+
+ pwm1_pins_default: pwm1-pins {
+ pinmux {
+ groups = "pwm1";
+ function = "pwm1";
+ };
+ };
+
+ pwm0_pins_default: pwm0-pins {
+ pinmux {
+ groups = "pwm0";
+ function = "pwm0";
+ };
+ };
+
+ i2c1_pins_default: i2c1-pins {
+ pinmux {
+ groups = "i2c1";
+ function = "i2c1";
+ };
+ };
+
+ i2c0_pins_default: i2c0-pins {
+ pinmux {
+ groups = "i2c0";
+ function = "i2c0";
+ };
+ };
+
+ nand_pins_default: nand-pins {
+ pinmux {
+ groups = "nand";
+ function = "nand";
+ };
+ };
+
+ hda_pins_default: hda-pins {
+ grp0-pinmux {
+ groups = "hda";
+ function = "hda";
+ };
+
+ grp1-pinmux {
+ groups = "i2s";
+ function = "gpio";
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml
new file mode 100644
index 0000000000..afea9424c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/marvell,ac5-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell AC5 pin controller
+
+maintainers:
+ - Chris Packham <chris.packham@alliedtelesis.co.nz>
+
+description:
+ Bindings for Marvell's AC5 memory-mapped pin controller.
+
+properties:
+ compatible:
+ items:
+ - const: marvell,ac5-pinctrl
+
+ reg:
+ maxItems: 1
+
+patternProperties:
+ '-pins$':
+ type: object
+ $ref: pinmux-node.yaml#
+ additionalProperties: false
+
+ properties:
+ marvell,function:
+ $ref: /schemas/types.yaml#/definitions/string
+ description:
+ Indicates the function to select.
+ enum: [ dev_init_done, ge, gpio, i2c0, i2c1, int_out, led, nand, pcie, ptp, sdio,
+ spi0, spi1, synce, tsen_int, uart0, uart1, uart2, uart3, uartsd, wd_int, xg ]
+
+ marvell,pins:
+ $ref: /schemas/types.yaml#/definitions/string-array
+ description:
+ Array of MPP pins to be used for the given function.
+ minItems: 1
+ items:
+ enum: [ mpp0, mpp1, mpp2, mpp3, mpp4, mpp5, mpp6, mpp7, mpp8, mpp9,
+ mpp10, mpp11, mpp12, mpp13, mpp14, mpp15, mpp16, mpp17, mpp18, mpp19,
+ mpp20, mpp21, mpp22, mpp23, mpp24, mpp25, mpp26, mpp27, mpp28, mpp29,
+ mpp30, mpp31, mpp32, mpp33, mpp34, mpp35, mpp36, mpp37, mpp38, mpp39,
+ mpp40, mpp41, mpp42, mpp43, mpp44, mpp45 ]
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ pinctrl@80020100 {
+ compatible = "marvell,ac5-pinctrl";
+ reg = <0x80020100 0x20>;
+
+ i2c0_pins: i2c0-pins {
+ marvell,pins = "mpp26", "mpp27";
+ marvell,function = "i2c0";
+ };
+
+ i2c0_gpio: i2c0-gpio-pins {
+ marvell,pins = "mpp26", "mpp27";
+ marvell,function = "gpio";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt
new file mode 100644
index 0000000000..8662f3aaf3
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt
@@ -0,0 +1,99 @@
+* Marvell Armada 370 SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,88f6710-pinctrl"
+- reg: register specifier of MPP registers
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+name pins functions
+================================================================================
+mpp0 0 gpio, uart0(rxd)
+mpp1 1 gpo, uart0(txd)
+mpp2 2 gpio, i2c0(sck), uart0(txd)
+mpp3 3 gpio, i2c0(sda), uart0(rxd)
+mpp4 4 gpio, vdd(cpu-pd)
+mpp5 5 gpo, ge0(txclkout), uart1(txd), spi1(sck), audio(mclk)
+mpp6 6 gpio, ge0(txd0), sata0(prsnt), tdm(rst), audio(sdo)
+mpp7 7 gpo, ge0(txd1), tdm(dtx), audio(lrclk)
+mpp8 8 gpio, ge0(txd2), uart0(rts), tdm(drx), audio(bclk)
+mpp9 9 gpo, ge0(txd3), uart1(txd), sd0(clk), audio(spdifo)
+mpp10 10 gpio, ge0(txctl), uart0(cts), tdm(fsync), audio(sdi)
+mpp11 11 gpio, ge0(rxd0), uart1(rxd), sd0(cmd), spi0(cs1),
+ sata1(prsnt), spi1(cs1)
+mpp12 12 gpio, ge0(rxd1), i2c1(sda), sd0(d0), spi1(cs0),
+ audio(spdifi)
+mpp13 13 gpio, ge0(rxd2), i2c1(sck), sd0(d1), tdm(pclk),
+ audio(rmclk)
+mpp14 14 gpio, ge0(rxd3), pcie(clkreq0), sd0(d2), spi1(mosi),
+ spi0(cs2)
+mpp15 15 gpio, ge0(rxctl), pcie(clkreq1), sd0(d3), spi1(miso),
+ spi0(cs3)
+mpp16 16 gpio, ge0(rxclk), uart1(rxd), tdm(int), audio(extclk)
+mpp17 17 gpo, ge(mdc)
+mpp18 18 gpio, ge(mdio)
+mpp19 19 gpio, ge0(txclk), ge1(txclkout), tdm(pclk)
+mpp20 20 gpo, ge0(txd4), ge1(txd0)
+mpp21 21 gpo, ge0(txd5), ge1(txd1), uart1(txd)
+mpp22 22 gpo, ge0(txd6), ge1(txd2), uart0(rts)
+mpp23 23 gpo, ge0(txd7), ge1(txd3), spi1(mosi)
+mpp24 24 gpio, ge0(col), ge1(txctl), spi1(cs0)
+mpp25 25 gpio, ge0(rxerr), ge1(rxd0), uart1(rxd)
+mpp26 26 gpio, ge0(crs), ge1(rxd1), spi1(miso)
+mpp27 27 gpio, ge0(rxd4), ge1(rxd2), uart0(cts)
+mpp28 28 gpio, ge0(rxd5), ge1(rxd3)
+mpp29 29 gpio, ge0(rxd6), ge1(rxctl), i2c1(sda)
+mpp30 30 gpio, ge0(rxd7), ge1(rxclk), i2c1(sck)
+mpp31 31 gpio, tclk, ge0(txerr)
+mpp32 32 gpio, spi0(cs0)
+mpp33 33 gpio, dev(bootcs), spi0(cs0)
+mpp34 34 gpo, dev(we0), spi0(mosi)
+mpp35 35 gpo, dev(oe), spi0(sck)
+mpp36 36 gpo, dev(a1), spi0(miso)
+mpp37 37 gpo, dev(a0), sata0(prsnt)
+mpp38 38 gpio, dev(ready), uart1(cts), uart0(cts)
+mpp39 39 gpo, dev(ad0), audio(spdifo)
+mpp40 40 gpio, dev(ad1), uart1(rts), uart0(rts)
+mpp41 41 gpio, dev(ad2), uart1(rxd)
+mpp42 42 gpo, dev(ad3), uart1(txd)
+mpp43 43 gpo, dev(ad4), audio(bclk)
+mpp44 44 gpo, dev(ad5), audio(mclk)
+mpp45 45 gpo, dev(ad6), audio(lrclk)
+mpp46 46 gpo, dev(ad7), audio(sdo)
+mpp47 47 gpo, dev(ad8), sd0(clk), audio(spdifo)
+mpp48 48 gpio, dev(ad9), uart0(rts), sd0(cmd), sata1(prsnt),
+ spi0(cs1)
+mpp49 49 gpio, dev(ad10), pcie(clkreq1), sd0(d0), spi1(cs0),
+ audio(spdifi)
+mpp50 50 gpio, dev(ad11), uart0(cts), sd0(d1), spi1(miso),
+ audio(rmclk)
+mpp51 51 gpio, dev(ad12), i2c1(sda), sd0(d2), spi1(mosi)
+mpp52 52 gpio, dev(ad13), i2c1(sck), sd0(d3), spi1(sck)
+mpp53 53 gpio, dev(ad14), sd0(clk), tdm(pclk), spi0(cs2),
+ pcie(clkreq1)
+mpp54 54 gpo, dev(ad15), tdm(dtx)
+mpp55 55 gpio, dev(cs1), uart1(txd), tdm(rst), sata1(prsnt),
+ sata0(prsnt)
+mpp56 56 gpio, dev(cs2), uart1(cts), uart0(cts), spi0(cs3),
+ pcie(clkreq0), spi1(cs1)
+mpp57 57 gpio, dev(cs3), uart1(rxd), tdm(fsync), sata0(prsnt),
+ audio(sdo)
+mpp58 58 gpio, dev(cs0), uart1(rts), tdm(int), audio(extclk),
+ uart0(rts)
+mpp59 59 gpo, dev(ale0), uart1(rts), uart0(rts), audio(bclk)
+mpp60 60 gpio, dev(ale1), uart1(rxd), sata0(prsnt), pcie(rstout),
+ audio(sdi)
+mpp61 61 gpo, dev(we1), uart1(txd), audio(lrclk)
+mpp62 62 gpio, dev(a2), uart1(cts), tdm(drx), pcie(clkreq0),
+ audio(mclk), uart0(cts)
+mpp63 63 gpio, spi0(sck), tclk
+mpp64 64 gpio, spi0(miso), spi0(cs1)
+mpp65 65 gpio, spi0(mosi), spi0(cs2)
+
+Note: According to the datasheet mpp63 is a gpo but there is at least
+one example of a gpio usage on the board D-Link DNS-327L
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-375-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-375-pinctrl.txt
new file mode 100644
index 0000000000..06e5bb0367
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-375-pinctrl.txt
@@ -0,0 +1,82 @@
+* Marvell Armada 375 SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,88f6720-pinctrl"
+- reg: register specifier of MPP registers
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+name pins functions
+================================================================================
+mpp0 0 gpio, dev(ad2), spi0(cs1), spi1(cs1)
+mpp1 1 gpio, dev(ad3), spi0(mosi), spi1(mosi)
+mpp2 2 gpio, dev(ad4), ptp(evreq), led(c0), audio(sdi)
+mpp3 3 gpio, dev(ad5), ptp(trig), led(p3), audio(mclk)
+mpp4 4 gpio, dev(ad6), spi0(miso), spi1(miso)
+mpp5 5 gpio, dev(ad7), spi0(cs2), spi1(cs2)
+mpp6 6 gpio, dev(ad0), led(p1), audio(lrclk)
+mpp7 7 gpio, dev(ad1), ptp(clk), led(p2), audio(extclk)
+mpp8 8 gpio, dev (bootcs), spi0(cs0), spi1(cs0)
+mpp9 9 gpio, spi0(sck), spi1(sck), nand(we)
+mpp10 10 gpio, dram(vttctrl), led(c1), nand(re)
+mpp11 11 gpio, dev(a0), led(c2), audio(sdo)
+mpp12 12 gpio, dev(a1), audio(bclk)
+mpp13 13 gpio, dev(ready), pcie0(rstout), pcie1(rstout)
+mpp14 14 gpio, i2c0(sda), uart1(txd)
+mpp15 15 gpio, i2c0(sck), uart1(rxd)
+mpp16 16 gpio, uart0(txd)
+mpp17 17 gpio, uart0(rxd)
+mpp18 18 gpio, tdm(int)
+mpp19 19 gpio, tdm(rst)
+mpp20 20 gpio, tdm(pclk)
+mpp21 21 gpio, tdm(fsync)
+mpp22 22 gpio, tdm(drx)
+mpp23 23 gpio, tdm(dtx)
+mpp24 24 gpio, led(p0), ge1(rxd0), sd(cmd), uart0(rts)
+mpp25 25 gpio, led(p2), ge1(rxd1), sd(d0), uart0(cts)
+mpp26 26 gpio, pcie0(clkreq), ge1(rxd2), sd(d2), uart1(rts)
+mpp27 27 gpio, pcie1(clkreq), ge1(rxd3), sd(d1), uart1(cts)
+mpp28 28 gpio, led(p3), ge1(txctl), sd(clk)
+mpp29 29 gpio, pcie1(clkreq), ge1(rxclk), sd(d3)
+mpp30 30 gpio, ge1(txd0), spi1(cs0)
+mpp31 31 gpio, ge1(txd1), spi1(mosi)
+mpp32 32 gpio, ge1(txd2), spi1(sck), ptp(trig)
+mpp33 33 gpio, ge1(txd3), spi1(miso)
+mpp34 34 gpio, ge1(txclkout), spi1(sck)
+mpp35 35 gpio, ge1(rxctl), spi1(cs1), spi0(cs2)
+mpp36 36 gpio, pcie0(clkreq)
+mpp37 37 gpio, pcie0(clkreq), tdm(int), ge(mdc)
+mpp38 38 gpio, pcie1(clkreq), ge(mdio)
+mpp39 39 gpio, ref(clkout)
+mpp40 40 gpio, uart1(txd)
+mpp41 41 gpio, uart1(rxd)
+mpp42 42 gpio, spi1(cs2), led(c0)
+mpp43 43 gpio, sata0(prsnt), dram(vttctrl)
+mpp44 44 gpio, sata0(prsnt)
+mpp45 45 gpio, spi0(cs2), pcie0(rstout)
+mpp46 46 gpio, led(p0), ge0(txd0), ge1(txd0), dev(we1)
+mpp47 47 gpio, led(p1), ge0(txd1), ge1(txd1)
+mpp48 48 gpio, led(p2), ge0(txd2), ge1(txd2)
+mpp49 49 gpio, led(p3), ge0(txd3), ge1(txd3)
+mpp50 50 gpio, led(c0), ge0(rxd0), ge1(rxd0)
+mpp51 51 gpio, led(c1), ge0(rxd1), ge1(rxd1)
+mpp52 52 gpio, led(c2), ge0(rxd2), ge1(rxd2)
+mpp53 53 gpio, pcie1(rstout), ge0(rxd3), ge1(rxd3)
+mpp54 54 gpio, pcie0(rstout), ge0(rxctl), ge1(rxctl)
+mpp55 55 gpio, ge0(rxclk), ge1(rxclk)
+mpp56 56 gpio, ge0(txclkout), ge1(txclkout)
+mpp57 57 gpio, ge0(txctl), ge1(txctl), dev(we0)
+mpp58 58 gpio, led(c0)
+mpp59 59 gpio, led(c1)
+mpp60 60 gpio, uart1(txd), led(c2)
+mpp61 61 gpio, i2c1(sda), uart1(rxd), spi1(cs2), led(p0)
+mpp62 62 gpio, i2c1(sck), led(p1)
+mpp63 63 gpio, ptp(trig), led(p2), dev(burst/last)
+mpp64 64 gpio, dram(vttctrl), led(p3)
+mpp65 65 gpio, sata1(prsnt)
+mpp66 66 gpio, ptp(evreq), spi1(cs3)
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
new file mode 100644
index 0000000000..ecec514b31
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
@@ -0,0 +1,195 @@
+* Marvell Armada 37xx SoC pin and gpio controller
+
+Each Armada 37xx SoC come with two pin and gpio controller one for the
+south bridge and the other for the north bridge.
+
+Inside this set of register the gpio latch allows exposing some
+configuration of the SoC and especially the clock frequency of the
+xtal. Hence, this node is a represent as syscon allowing sharing the
+register between multiple hardware block.
+
+GPIO and pin controller:
+------------------------
+
+Main node:
+
+Refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning
+of the phrase "pin configuration node".
+
+Required properties for pinctrl driver:
+
+- compatible: "marvell,armada3710-sb-pinctrl", "syscon, "simple-mfd"
+ for the south bridge
+ "marvell,armada3710-nb-pinctrl", "syscon, "simple-mfd"
+ for the north bridge
+- reg: The first set of register are for pinctrl/gpio and the second
+ set for the interrupt controller
+- interrupts: list of the interrupt use by the gpio
+
+Available groups and functions for the North bridge:
+
+group: jtag
+ - pins 20-24
+ - functions jtag, gpio
+
+group sdio0
+ - pins 8-10
+ - functions sdio, gpio
+
+group emmc_nb
+ - pins 27-35
+ - functions emmc, gpio
+
+group pwm0
+ - pin 11 (GPIO1-11)
+ - functions pwm, led, gpio
+
+group pwm1
+ - pin 12
+ - functions pwm, led, gpio
+
+group pwm2
+ - pin 13
+ - functions pwm, led, gpio
+
+group pwm3
+ - pin 14
+ - functions pwm, led, gpio
+
+group pmic1
+ - pin 7
+ - functions pmic, gpio
+
+group pmic0
+ - pin 6
+ - functions pmic, gpio
+
+group i2c2
+ - pins 2-3
+ - functions i2c, gpio
+
+group i2c1
+ - pins 0-1
+ - functions i2c, gpio
+
+group spi_cs1
+ - pin 17
+ - functions spi, gpio
+
+group spi_cs2
+ - pin 18
+ - functions spi, gpio
+
+group spi_cs3
+ - pin 19
+ - functions spi, gpio
+
+group onewire
+ - pin 4
+ - functions onewire, gpio
+
+group uart1
+ - pins 25-26
+ - functions uart, gpio
+
+group spi_quad
+ - pins 15-16
+ - functions spi, gpio
+
+group uart2
+ - pins 9-10 and 18-19
+ - functions uart, gpio
+
+Available groups and functions for the South bridge:
+
+group usb32_drvvbus0
+ - pin 36
+ - functions drvbus, gpio
+
+group usb2_drvvbus1
+ - pin 37
+ - functions drvbus, gpio
+
+group sdio_sb
+ - pins 60-65
+ - functions sdio, gpio
+
+group rgmii
+ - pins 42-53
+ - functions mii, gpio
+
+group pcie1
+ - pins 39
+ - functions pcie, gpio
+
+group pcie1_clkreq
+ - pins 40
+ - functions pcie, gpio
+
+group pcie1_wakeup
+ - pins 41
+ - functions pcie, gpio
+
+group smi
+ - pins 54-55
+ - functions smi, gpio
+
+group ptp
+ - pins 56
+ - functions ptp, gpio
+
+group ptp_clk
+ - pin 57
+ - functions ptp, mii
+
+group ptp_trig
+ - pin 58
+ - functions ptp, mii
+
+group mii_col
+ - pin 59
+ - functions mii, mii_err
+
+GPIO subnode:
+
+Please refer to gpio.txt in this directory for details of gpio-ranges property
+and the common GPIO bindings used by client devices.
+
+Required properties for gpio driver under the gpio subnode:
+- interrupts: List of interrupt specifier for the controllers interrupt.
+- gpio-controller: Marks the device node as a gpio controller.
+- #gpio-cells: Should be 2. The first cell is the GPIO number and the
+ second cell specifies GPIO flags, as defined in
+ <dt-bindings/gpio/gpio.h>. Only the GPIO_ACTIVE_HIGH and
+ GPIO_ACTIVE_LOW flags are supported.
+- gpio-ranges: Range of pins managed by the GPIO controller.
+
+Xtal Clock bindings for Marvell Armada 37xx SoCs
+------------------------------------------------
+
+see Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt
+
+
+Example:
+pinctrl_sb: pinctrl-sb@18800 {
+ compatible = "marvell,armada3710-sb-pinctrl", "syscon", "simple-mfd";
+ reg = <0x18800 0x100>, <0x18C00 0x20>;
+ gpio {
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl_sb 0 0 29>;
+ gpio-controller;
+ interrupts =
+ <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ rgmii_pins: mii-pins {
+ groups = "rgmii";
+ function = "mii";
+ };
+
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-38x-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-38x-pinctrl.txt
new file mode 100644
index 0000000000..54ec4c0a0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-38x-pinctrl.txt
@@ -0,0 +1,80 @@
+* Marvell Armada 380/385 SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,88f6810-pinctrl", "marvell,88f6820-pinctrl" or
+ "marvell,88f6828-pinctrl" depending on the specific variant of the
+ SoC being used.
+- reg: register specifier of MPP registers
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+name pins functions
+================================================================================
+mpp0 0 gpio, ua0(rxd)
+mpp1 1 gpio, ua0(txd)
+mpp2 2 gpio, i2c0(sck)
+mpp3 3 gpio, i2c0(sda)
+mpp4 4 gpio, ge(mdc), ua1(txd), ua0(rts)
+mpp5 5 gpio, ge(mdio), ua1(rxd), ua0(cts)
+mpp6 6 gpio, ge0(txclkout), ge0(crs), dev(cs3)
+mpp7 7 gpio, ge0(txd0), dev(ad9)
+mpp8 8 gpio, ge0(txd1), dev(ad10)
+mpp9 9 gpio, ge0(txd2), dev(ad11)
+mpp10 10 gpio, ge0(txd3), dev(ad12)
+mpp11 11 gpio, ge0(txctl), dev(ad13)
+mpp12 12 gpio, ge0(rxd0), pcie0(rstout), spi0(cs1), dev(ad14), pcie3(clkreq)
+mpp13 13 gpio, ge0(rxd1), pcie0(clkreq), pcie1(clkreq) [1], spi0(cs2), dev(ad15), pcie2(clkreq)
+mpp14 14 gpio, ge0(rxd2), ptp(clk), dram(vttctrl), spi0(cs3), dev(we1), pcie3(clkreq)
+mpp15 15 gpio, ge0(rxd3), ge(mdc slave), pcie0(rstout), spi0(mosi)
+mpp16 16 gpio, ge0(rxctl), ge(mdio slave), dram(deccerr), spi0(miso), pcie0(clkreq), pcie1(clkreq) [1]
+mpp17 17 gpio, ge0(rxclk), ptp(clk), ua1(rxd), spi0(sck), sata1(prsnt), sata0(prsnt)
+mpp18 18 gpio, ge0(rxerr), ptp(trig), ua1(txd), spi0(cs0)
+mpp19 19 gpio, ge0(col), ptp(evreq), ge0(txerr), sata1(prsnt), ua0(cts)
+mpp20 20 gpio, ge0(txclk), ptp(clk), sata0(prsnt), ua0(rts)
+mpp21 21 gpio, spi0(cs1), ge1(rxd0), sata0(prsnt), sd0(cmd), dev(bootcs), sata1(prsnt)
+mpp22 22 gpio, spi0(mosi), dev(ad0)
+mpp23 23 gpio, spi0(sck), dev(ad2)
+mpp24 24 gpio, spi0(miso), ua0(cts), ua1(rxd), sd0(d4), dev(ready)
+mpp25 25 gpio, spi0(cs0), ua0(rts), ua1(txd), sd0(d5), dev(cs0)
+mpp26 26 gpio, spi0(cs2), i2c1(sck), sd0(d6), dev(cs1)
+mpp27 27 gpio, spi0(cs3), ge1(txclkout), i2c1(sda), sd0(d7), dev(cs2)
+mpp28 28 gpio, ge1(txd0), sd0(clk), dev(ad5)
+mpp29 29 gpio, ge1(txd1), dev(ale0)
+mpp30 30 gpio, ge1(txd2), dev(oe)
+mpp31 31 gpio, ge1(txd3), dev(ale1)
+mpp32 32 gpio, ge1(txctl), dev(we0)
+mpp33 33 gpio, dram(deccerr), dev(ad3)
+mpp34 34 gpio, dev(ad1)
+mpp35 35 gpio, ref(clk_out1), dev(a1)
+mpp36 36 gpio, ptp(trig), dev(a0)
+mpp37 37 gpio, ptp(clk), ge1(rxclk), sd0(d3), dev(ad8)
+mpp38 38 gpio, ptp(evreq), ge1(rxd1), ref(clk_out0), sd0(d0), dev(ad4)
+mpp39 39 gpio, i2c1(sck), ge1(rxd2), ua0(cts), sd0(d1), dev(a2)
+mpp40 40 gpio, i2c1(sda), ge1(rxd3), ua0(rts), sd0(d2), dev(ad6)
+mpp41 41 gpio, ua1(rxd), ge1(rxctl), ua0(cts), spi1(cs3), dev(burst/last), nand(rb0)
+mpp42 42 gpio, ua1(txd), ua0(rts), dev(ad7)
+mpp43 43 gpio, pcie0(clkreq), dram(vttctrl), dram(deccerr), spi1(cs2), dev(clkout), nand(rb1)
+mpp44 44 gpio, sata0(prsnt), sata1(prsnt), sata2(prsnt) [2], sata3(prsnt) [3]
+mpp45 45 gpio, ref(clk_out0), pcie0(rstout), ua1(rxd)
+mpp46 46 gpio, ref(clk_out1), pcie0(rstout), ua1(txd)
+mpp47 47 gpio, sata0(prsnt), sata1(prsnt), sata2(prsnt) [2], sata3(prsnt) [2]
+mpp48 48 gpio, sata0(prsnt), dram(vttctrl), tdm(pclk), audio(mclk), sd0(d4), pcie0(clkreq)
+mpp49 49 gpio, sata2(prsnt) [2], sata3(prsnt) [2], tdm(fsync), audio(lrclk), sd0(d5), pcie1(clkreq)
+mpp50 50 gpio, pcie0(rstout), tdm(drx), audio(extclk), sd0(cmd)
+mpp51 51 gpio, tdm(dtx), audio(sdo), dram(deccerr), ptp(trig)
+mpp52 52 gpio, pcie0(rstout), tdm(int), audio(sdi), sd0(d6), ptp(clk)
+mpp53 53 gpio, sata1(prsnt), sata0(prsnt), tdm(rst), audio(bclk), sd0(d7), ptp(evreq)
+mpp54 54 gpio, sata0(prsnt), sata1(prsnt), pcie0(rstout), ge0(txerr), sd0(d3)
+mpp55 55 gpio, ua1(cts), ge(mdio), pcie1(clkreq) [1], spi1(cs1), sd0(d0), ua1(rxd)
+mpp56 56 gpio, ua1(rts), ge(mdc), dram(deccerr), spi1(mosi), ua1(txd)
+mpp57 57 gpio, spi1(sck), sd0(clk), ua1(txd)
+mpp58 58 gpio, pcie1(clkreq) [1], i2c1(sck), pcie2(clkreq), spi1(miso), sd0(d1), ua1(rxd)
+mpp59 59 gpio, pcie0(rstout), i2c1(sda), spi1(cs0), sd0(d2)
+
+[1]: only available on 88F6820 and 88F6828
+[2]: only available on 88F6828
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-39x-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-39x-pinctrl.txt
new file mode 100644
index 0000000000..a40b60f1ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-39x-pinctrl.txt
@@ -0,0 +1,84 @@
+* Marvell Armada 39x SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,88f6920-pinctrl", "marvell,88f6925-pinctrl" or
+ "marvell,88f6928-pinctrl" depending on the specific variant of the
+ SoC being used.
+- reg: register specifier of MPP registers
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+name pins functions
+================================================================================
+mpp0 0 gpio, ua0(rxd)
+mpp1 1 gpio, ua0(txd)
+mpp2 2 gpio, i2c0(sck)
+mpp3 3 gpio, i2c0(sda)
+mpp4 4 gpio, ua1(txd), ua0(rts), smi(mdc)
+mpp5 5 gpio, ua1(rxd), ua0(cts), smi(mdio)
+mpp6 6 gpio, dev(cs3), xsmi(mdio)
+mpp7 7 gpio, dev(ad9), xsmi(mdc)
+mpp8 8 gpio, dev(ad10), ptp(trig)
+mpp9 9 gpio, dev(ad11), ptp(clk)
+mpp10 10 gpio, dev(ad12), ptp(evreq)
+mpp11 11 gpio, dev(ad13), led(clk)
+mpp12 12 gpio, pcie0(rstout), dev(ad14), led(stb)
+mpp13 13 gpio, dev(ad15), pcie2(clkreq), led(data)
+mpp14 14 gpio, dram(vttctrl), dev(we1), ua1(txd)
+mpp15 15 gpio, pcie0(rstout), spi0(mosi), i2c1(sck)
+mpp16 16 gpio, dram(deccerr), spi0(miso), pcie0(clkreq), i2c1(sda)
+mpp17 17 gpio, ua1(rxd), spi0(sck), sata1(prsnt) [1], sata0(prsnt) [1], smi(mdio)
+mpp18 18 gpio, ua1(txd), spi0(cs0), i2c2(sck)
+mpp19 19 gpio, sata1(prsnt) [1], ua0(cts), ua1(rxd), i2c2(sda)
+mpp20 20 gpio, sata0(prsnt) [1], ua0(rts), ua1(txd), smi(mdc)
+mpp21 21 gpio, spi0(cs1), sata0(prsnt) [1], sd0(cmd), dev(bootcs),
+ sata1(prsnt) [1], ge(rxd0)
+mpp22 22 gpio, spi0(mosi), dev(ad0)
+mpp23 23 gpio, spi0(sck), dev(ad2)
+mpp24 24 gpio, spi0(miso), ua0(cts), ua1(rxd), sd0(d4), dev(ready)
+mpp25 25 gpio, spi0(cs0), ua0(rts), ua1(txd), sd0(d5), dev(cs0)
+mpp26 26 gpio, spi0(cs2), i2c1(sck), sd0(d6), dev(cs1)
+mpp27 27 gpio, spi0(cs3), i2c1(sda), sd0(d7), dev(cs2), ge(txclkout)
+mpp28 28 gpio, sd0(clk), dev(ad5), ge(txd0)
+mpp29 29 gpio, dev(ale0), ge(txd1)
+mpp30 30 gpio, dev(oe), ge(txd2)
+mpp31 31 gpio, dev(ale1), ge(txd3)
+mpp32 32 gpio, dev(we0), ge(txctl)
+mpp33 33 gpio, dram(deccerr), dev(ad3)
+mpp34 34 gpio, dev(ad1)
+mpp35 35 gpio, ref(clk), dev(a1)
+mpp36 36 gpio, dev(a0)
+mpp37 37 gpio, sd0(d3), dev(ad8), ge(rxclk)
+mpp38 38 gpio, ref(clk), sd0(d0), dev(ad4), ge(rxd1)
+mpp39 39 gpio, i2c1(sck), ua0(cts), sd0(d1), dev(a2), ge(rxd2)
+mpp40 40 gpio, i2c1(sda), ua0(rts), sd0(d2), dev(ad6), ge(rxd3)
+mpp41 41 gpio, ua1(rxd), ua0(cts), spi1(cs3), dev(burst/last), nand(rb0), ge(rxctl)
+mpp42 42 gpio, ua1(txd), ua0(rts), dev(ad7)
+mpp43 43 gpio, pcie0(clkreq), dram(vttctrl), dram(deccerr), spi1(cs2), dev(clkout), nand(rb1)
+mpp44 44 gpio, sata0(prsnt) [1], sata1(prsnt) [1], sata2(prsnt) [2],
+ sata3(prsnt) [2], led(clk)
+mpp45 45 gpio, ref(clk), pcie0(rstout), ua1(rxd)
+mpp46 46 gpio, ref(clk), pcie0(rstout), ua1(txd), led(stb)
+mpp47 47 gpio, sata0(prsnt) [1], sata1(prsnt) [1], sata2(prsnt) [2],
+ sata3(prsnt) [2], led(data)
+mpp48 48 gpio, sata0(prsnt) [1], dram(vttctrl), tdm(pclk) [2], audio(mclk) [2], sd0(d4), pcie0(clkreq), ua1(txd)
+mpp49 49 gpio, sata2(prsnt) [2], sata3(prsnt) [2], tdm(fsync) [2],
+ audio(lrclk) [2], sd0(d5), ua2(rxd)
+mpp50 50 gpio, pcie0(rstout), tdm(drx) [2], audio(extclk) [2], sd0(cmd), ua2(rxd)
+mpp51 51 gpio, tdm(dtx) [2], audio(sdo) [2], dram(deccerr), ua2(txd)
+mpp52 52 gpio, pcie0(rstout), tdm(int) [2], audio(sdi) [2], sd0(d6), i2c3(sck)
+mpp53 53 gpio, sata1(prsnt) [1], sata0(prsnt) [1], tdm(rst) [2], audio(bclk) [2], sd0(d7), i2c3(sda)
+mpp54 54 gpio, sata0(prsnt) [1], sata1(prsnt) [1], pcie0(rstout), sd0(d3), ua3(txd)
+mpp55 55 gpio, ua1(cts), spi1(cs1), sd0(d0), ua1(rxd), ua3(rxd)
+mpp56 56 gpio, ua1(rts), dram(deccerr), spi1(mosi), ua1(txd)
+mpp57 57 gpio, spi1(sck), sd0(clk), ua1(txd)
+mpp58 58 gpio, i2c1(sck), pcie2(clkreq), spi1(miso), sd0(d1), ua1(rxd)
+mpp59 59 gpio, pcie0(rstout), i2c1(sda), spi1(cs0), sd0(d2)
+
+[1]: only available on 88F6925/88F6928
+[2]: only available on 88F6928
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
new file mode 100644
index 0000000000..97aef67ee7
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-98dx3236-pinctrl.txt
@@ -0,0 +1,46 @@
+* Marvell 98dx3236 pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage
+
+Required properties:
+- compatible: "marvell,98dx3236-pinctrl" or "marvell,98dx4251-pinctrl"
+- reg: register specifier of MPP registers
+
+This driver supports all 98dx3236, 98dx3336 and 98dx4251 variants
+
+name pins functions
+================================================================================
+mpp0 0 gpo, spi0(mosi), dev(ad8)
+mpp1 1 gpio, spi0(miso), dev(ad9)
+mpp2 2 gpo, spi0(sck), dev(ad10)
+mpp3 3 gpio, spi0(cs0), dev(ad11)
+mpp4 4 gpio, spi0(cs1), smi(mdc), dev(cs0)
+mpp5 5 gpio, pex(rsto), sd0(cmd), dev(bootcs)
+mpp6 6 gpo, sd0(clk), dev(a2)
+mpp7 7 gpio, sd0(d0), dev(ale0)
+mpp8 8 gpio, sd0(d1), dev(ale1)
+mpp9 9 gpio, sd0(d2), dev(ready0)
+mpp10 10 gpio, sd0(d3), dev(ad12)
+mpp11 11 gpio, uart1(rxd), uart0(cts), dev(ad13)
+mpp12 12 gpo, uart1(txd), uart0(rts), dev(ad14)
+mpp13 13 gpio, intr(out), dev(ad15)
+mpp14 14 gpio, i2c0(sck)
+mpp15 15 gpio, i2c0(sda)
+mpp16 16 gpo, dev(oe)
+mpp17 17 gpo, dev(clkout)
+mpp18 18 gpio, uart1(txd)
+mpp19 19 gpio, uart1(rxd), dev(rb)
+mpp20 20 gpo, dev(we0)
+mpp21 21 gpo, dev(ad0)
+mpp22 22 gpo, dev(ad1)
+mpp23 23 gpo, dev(ad2)
+mpp24 24 gpo, dev(ad3)
+mpp25 25 gpo, dev(ad4)
+mpp26 26 gpo, dev(ad5)
+mpp27 27 gpo, dev(ad6)
+mpp28 28 gpo, dev(ad7)
+mpp29 29 gpo, dev(a0)
+mpp30 30 gpo, dev(a1)
+mpp31 31 gpio, slv_smi(mdc), smi(mdc), dev(we1)
+mpp32 32 gpio, slv_smi(mdio), smi(mdio), dev(cs1)
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt
new file mode 100644
index 0000000000..76da7222ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt
@@ -0,0 +1,99 @@
+* Marvell Armada XP SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,mv78230-pinctrl", "marvell,mv78260-pinctrl",
+ "marvell,mv78460-pinctrl"
+- reg: register specifier of MPP registers
+
+This driver supports all Armada XP variants, i.e. mv78230, mv78260, and mv78460.
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+* Marvell Armada XP (all variants)
+
+name pins functions
+================================================================================
+mpp0 0 gpio, ge0(txclkout), lcd(d0)
+mpp1 1 gpio, ge0(txd0), lcd(d1)
+mpp2 2 gpio, ge0(txd1), lcd(d2)
+mpp3 3 gpio, ge0(txd2), lcd(d3)
+mpp4 4 gpio, ge0(txd3), lcd(d4)
+mpp5 5 gpio, ge0(txctl), lcd(d5)
+mpp6 6 gpio, ge0(rxd0), lcd(d6)
+mpp7 7 gpio, ge0(rxd1), lcd(d7)
+mpp8 8 gpio, ge0(rxd2), lcd(d8)
+mpp9 9 gpio, ge0(rxd3), lcd(d9)
+mpp10 10 gpio, ge0(rxctl), lcd(d10)
+mpp11 11 gpio, ge0(rxclk), lcd(d11)
+mpp12 12 gpio, ge0(txd4), ge1(txclkout), lcd(d12)
+mpp13 13 gpio, ge0(txd5), ge1(txd0), spi1(mosi), lcd(d13)
+mpp14 14 gpio, ge0(txd6), ge1(txd1), spi1(sck), lcd(d15)
+mpp15 15 gpio, ge0(txd7), ge1(txd2), lcd(d16)
+mpp16 16 gpio, ge0(txd7), ge1(txd3), spi1(cs0), lcd(d16)
+mpp17 17 gpio, ge0(col), ge1(txctl), spi1(miso), lcd(d17)
+mpp18 18 gpio, ge0(rxerr), ge1(rxd0), lcd(d18), ptp(trig)
+mpp19 19 gpio, ge0(crs), ge1(rxd1), lcd(d19), ptp(evreq)
+mpp20 20 gpio, ge0(rxd4), ge1(rxd2), lcd(d20), ptp(clk)
+mpp21 21 gpio, ge0(rxd5), ge1(rxd3), lcd(d21), dram(bat)
+mpp22 22 gpio, ge0(rxd6), ge1(rxctl), lcd(d22), sata0(prsnt)
+mpp23 23 gpio, ge0(rxd7), ge1(rxclk), lcd(d23), sata1(prsnt)
+mpp24 24 gpio, lcd(hsync), sata1(prsnt), tdm(rst)
+mpp25 25 gpio, lcd(vsync), sata0(prsnt), tdm(pclk)
+mpp26 26 gpio, lcd(clk), tdm(fsync)
+mpp27 27 gpio, lcd(e), tdm(dtx), ptp(trig)
+mpp28 28 gpio, lcd(pwm), tdm(drx), ptp(evreq)
+mpp29 29 gpio, lcd(ref-clk), tdm(int0), ptp(clk)
+mpp30 30 gpio, tdm(int1), sd0(clk)
+mpp31 31 gpio, tdm(int2), sd0(cmd)
+mpp32 32 gpio, tdm(int3), sd0(d0)
+mpp33 33 gpio, tdm(int4), sd0(d1), dram(bat), dram(vttctrl)
+mpp34 34 gpio, tdm(int5), sd0(d2), sata0(prsnt), dram(deccerr)
+mpp35 35 gpio, tdm(int6), sd0(d3), sata1(prsnt)
+mpp36 36 gpio, spi0(mosi)
+mpp37 37 gpio, spi0(miso)
+mpp38 38 gpio, spi0(sck)
+mpp39 39 gpio, spi0(cs0)
+mpp40 40 gpio, spi0(cs1), uart2(cts), lcd(vga-hsync), pcie(clkreq0),
+ spi1(cs1)
+mpp41 41 gpio, spi0(cs2), uart2(rts), lcd(vga-vsync), sata1(prsnt),
+ pcie(clkreq1), spi1(cs2)
+mpp42 42 gpio, uart2(rxd), uart0(cts), tdm(int7), tdm(timer)
+mpp43 43 gpio, uart2(txd), uart0(rts), spi0(cs3), pcie(rstout),
+ spi1(cs3)
+mpp44 44 gpio, uart2(cts), uart3(rxd), spi0(cs4), pcie(clkreq2),
+ dram(bat), spi1(cs4)
+mpp45 45 gpio, uart2(rts), uart3(txd), spi0(cs5), sata1(prsnt),
+ spi1(cs5), dram(vttctrl)
+mpp46 46 gpio, uart3(rts), uart1(rts), spi0(cs6), sata0(prsnt),
+ spi1(cs6)
+mpp47 47 gpio, uart3(cts), uart1(cts), spi0(cs7), pcie(clkreq3),
+ ref(clkout), spi1(cs7)
+mpp48 48 gpio, dev(clkout), dev(burst/last), nand(rb)
+
+* Marvell Armada XP (mv78260 and mv78460 only)
+
+name pins functions
+================================================================================
+mpp49 49 gpio, dev(we3)
+mpp50 50 gpio, dev(we2)
+mpp51 51 gpio, dev(ad16)
+mpp52 52 gpio, dev(ad17)
+mpp53 53 gpio, dev(ad18)
+mpp54 54 gpio, dev(ad19)
+mpp55 55 gpio, dev(ad20)
+mpp56 56 gpio, dev(ad21)
+mpp57 57 gpio, dev(ad22)
+mpp58 58 gpio, dev(ad23)
+mpp59 59 gpio, dev(ad24)
+mpp60 60 gpio, dev(ad25)
+mpp61 61 gpio, dev(ad26)
+mpp62 62 gpio, dev(ad27)
+mpp63 63 gpio, dev(ad28)
+mpp64 64 gpio, dev(ad29)
+mpp65 65 gpio, dev(ad30)
+mpp66 66 gpio, dev(ad31)
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt
new file mode 100644
index 0000000000..cf52477cc7
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt
@@ -0,0 +1,90 @@
+* Marvell Dove SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,dove-pinctrl"
+- clocks: (optional) phandle of pdma clock
+- reg: register specifiers of MPP, MPP4, and PMU MPP registers
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+Note: pmu* also allows for Power Management functions listed below
+
+name pins functions
+================================================================================
+mpp0 0 gpio, pmu, uart2(rts), sdio0(cd), lcd0(pwm), pmu*
+mpp1 1 gpio, pmu, uart2(cts), sdio0(wp), lcd1(pwm), pmu*
+mpp2 2 gpio, pmu, uart2(txd), sdio0(buspwr), sata(prsnt),
+ uart1(rts), pmu*
+mpp3 3 gpio, pmu, uart2(rxd), sdio0(ledctrl), sata(act),
+ uart1(cts), lcd-spi(cs1), pmu*
+mpp4 4 gpio, pmu, uart3(rts), sdio1(cd), spi1(miso), pmu*
+mpp5 5 gpio, pmu, uart3(cts), sdio1(wp), spi1(cs), pmu*
+mpp6 6 gpio, pmu, uart3(txd), sdio1(buspwr), spi1(mosi), pmu*
+mpp7 7 gpio, pmu, uart3(rxd), sdio1(ledctrl), spi1(sck), pmu*
+mpp8 8 gpio, pmu, watchdog(rstout), pmu*
+mpp9 9 gpio, pmu, pex1(clkreq), pmu*
+mpp10 10 gpio, pmu, ssp(sclk), pmu*
+mpp11 11 gpio, pmu, sata(prsnt), sata-1(act), sdio0(ledctrl),
+ sdio1(ledctrl), pex0(clkreq), pmu*
+mpp12 12 gpio, pmu, uart2(rts), audio0(extclk), sdio1(cd),
+ sata(act), pmu*
+mpp13 13 gpio, pmu, uart2(cts), audio1(extclk), sdio1(wp),
+ ssp(extclk), pmu*
+mpp14 14 gpio, pmu, uart2(txd), sdio1(buspwr), ssp(rxd), pmu*
+mpp15 15 gpio, pmu, uart2(rxd), sdio1(ledctrl), ssp(sfrm), pmu*
+mpp16 16 gpio, uart3(rts), sdio0(cd), ac97(sdi1), lcd-spi(cs1)
+mpp17 17 gpio, uart3(cts), sdio0(wp), ac97(sdi2), twsi(sda),
+ ac97-1(sysclko)
+mpp18 18 gpio, uart3(txd), sdio0(buspwr), ac97(sdi3), lcd0(pwm)
+mpp19 19 gpio, uart3(rxd), sdio0(ledctrl), twsi(sck)
+mpp20 20 gpio, sdio0(cd), sdio1(cd), spi1(miso), lcd-spi(miso),
+ ac97(sysclko)
+mpp21 21 gpio, sdio0(wp), sdio1(wp), spi1(cs), lcd-spi(cs0),
+ uart1(cts), ssp(sfrm)
+mpp22 22 gpio, sdio0(buspwr), sdio1(buspwr), spi1(mosi),
+ lcd-spi(mosi), uart1(cts), ssp(txd)
+mpp23 23 gpio, sdio0(ledctrl), sdio1(ledctrl), spi1(sck),
+ lcd-spi(sck), ssp(sclk)
+mpp_camera 24-39 gpio, camera
+mpp_sdio0 40-45 gpio, sdio0
+mpp_sdio1 46-51 gpio, sdio1
+mpp_audio1 52-57 gpio, i2s1/spdifo, i2s1, spdifo, twsi, ssp/spdifo, ssp,
+ ssp/twsi
+mpp_spi0 58-61 gpio, spi0
+mpp_uart1 62-63 gpio, uart1
+mpp_nand 64-71 gpo, nand
+audio0 - i2s, ac97
+twsi - none, opt1, opt2, opt3
+
+Power Management functions (pmu*):
+pmu-nc Pin not driven by any PM function
+pmu-low Pin driven low (0)
+pmu-high Pin driven high (1)
+pmic(sdi) Pin is used for PMIC SDI
+cpu-pwr-down Pin is used for CPU_PWRDWN
+standby-pwr-down Pin is used for STBY_PWRDWN
+core-pwr-good Pin is used for CORE_PWR_GOOD (Pins 0-7 only)
+cpu-pwr-good Pin is used for CPU_PWR_GOOD (Pins 8-15 only)
+bat-fault Pin is used for BATTERY_FAULT
+ext0-wakeup Pin is used for EXT0_WU
+ext1-wakeup Pin is used for EXT0_WU
+ext2-wakeup Pin is used for EXT0_WU
+pmu-blink Pin is used for blink function
+
+Notes:
+* group "mpp_audio1" allows the following functions and gpio pins:
+ - gpio : gpio on pins 52-57
+ - i2s1/spdifo : audio1 i2s on pins 52-55 and spdifo on 57, no gpios
+ - i2s1 : audio1 i2s on pins 52-55, gpio on pins 56,57
+ - spdifo : spdifo on pin 57, gpio on pins 52-55
+ - twsi : twsi on pins 56,57, gpio on pins 52-55
+ - ssp/spdifo : ssp on pins 52-55, spdifo on pin 57, no gpios
+ - ssp : ssp on pins 52-55, gpio on pins 56,57
+ - ssp/twsi : ssp on pins 52-55, twsi on pins 56,57, no gpios
+* group "audio0" internally muxes i2s0 or ac97 controller to the dedicated
+ audio0 pins.
+* group "twsi" internally muxes twsi controller to the dedicated or option pins.
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt
new file mode 100644
index 0000000000..2932f171ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt
@@ -0,0 +1,359 @@
+* Marvell Kirkwood SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,88f6180-pinctrl",
+ "marvell,88f6190-pinctrl", "marvell,88f6192-pinctrl",
+ "marvell,88f6281-pinctrl", "marvell,88f6282-pinctrl",
+ "marvell,98dx4122-pinctrl", "marvell,98dx1135-pinctrl"
+- reg: register specifier of MPP registers
+
+This driver supports all kirkwood variants, i.e. 88f6180, 88f619x, and 88f628x.
+It also support the 88f6281-based variant in the 98dx412x Bobcat SoCs.
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+* Marvell Kirkwood 88f6180
+
+name pins functions
+================================================================================
+mpp0 0 gpio, nand(io2), spi(cs)
+mpp1 1 gpo, nand(io3), spi(mosi)
+mpp2 2 gpo, nand(io4), spi(sck)
+mpp3 3 gpo, nand(io5), spi(miso)
+mpp4 4 gpio, nand(io6), uart0(rxd), ptp(clk)
+mpp5 5 gpo, nand(io7), uart0(txd), ptp(trig)
+mpp6 6 sysrst(out), spi(mosi), ptp(trig)
+mpp7 7 gpo, pex(rsto), spi(cs), ptp(trig)
+mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk),
+ mii(col)
+mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq),
+ mii(crs)
+mpp10 10 gpo, spi(sck), uart0(txd), ptp(trig)
+mpp11 11 gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq),
+ ptp-2(trig)
+mpp12 12 gpo, sdio(clk)
+mpp13 13 gpio, sdio(cmd), uart1(txd)
+mpp14 14 gpio, sdio(d0), uart1(rxd), mii(col)
+mpp15 15 gpio, sdio(d1), uart0(rts), uart1(txd)
+mpp16 16 gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs)
+mpp17 17 gpio, sdio(d3)
+mpp18 18 gpo, nand(io0)
+mpp19 19 gpo, nand(io1)
+mpp35 35 gpio, mii(rxerr)
+mpp36 36 gpio, audio(spdifi)
+mpp37 37 gpio, audio(spdifo)
+mpp38 38 gpio, audio(rmclk)
+mpp39 39 gpio, audio(bclk)
+mpp40 40 gpio, audio(sdo)
+mpp41 41 gpio, audio(lrclk)
+mpp42 42 gpio, audio(mclk)
+mpp43 43 gpio, audio(sdi)
+mpp44 44 gpio, audio(extclk)
+
+* Marvell Kirkwood 88f6190
+
+name pins functions
+================================================================================
+mpp0 0 gpio, nand(io2), spi(cs)
+mpp1 1 gpo, nand(io3), spi(mosi)
+mpp2 2 gpo, nand(io4), spi(sck)
+mpp3 3 gpo, nand(io5), spi(miso)
+mpp4 4 gpio, nand(io6), uart0(rxd), ptp(clk)
+mpp5 5 gpo, nand(io7), uart0(txd), ptp(trig), sata0(act)
+mpp6 6 sysrst(out), spi(mosi), ptp(trig)
+mpp7 7 gpo, pex(rsto), spi(cs), ptp(trig)
+mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk),
+ mii(col), mii-1(rxerr)
+mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq),
+ mii(crs), sata0(prsnt)
+mpp10 10 gpo, spi(sck), uart0(txd), ptp(trig)
+mpp11 11 gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq),
+ ptp-2(trig), sata0(act)
+mpp12 12 gpo, sdio(clk)
+mpp13 13 gpio, sdio(cmd), uart1(txd)
+mpp14 14 gpio, sdio(d0), uart1(rxd), mii(col)
+mpp15 15 gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act)
+mpp16 16 gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs)
+mpp17 17 gpio, sdio(d3), sata0(prsnt)
+mpp18 18 gpo, nand(io0)
+mpp19 19 gpo, nand(io1)
+mpp20 20 gpio, ge1(txd0)
+mpp21 21 gpio, ge1(txd1), sata0(act)
+mpp22 22 gpio, ge1(txd2)
+mpp23 23 gpio, ge1(txd3), sata0(prsnt)
+mpp24 24 gpio, ge1(rxd0)
+mpp25 25 gpio, ge1(rxd1)
+mpp26 26 gpio, ge1(rxd2)
+mpp27 27 gpio, ge1(rxd3)
+mpp28 28 gpio, ge1(col)
+mpp29 29 gpio, ge1(txclk)
+mpp30 30 gpio, ge1(rxclk)
+mpp31 31 gpio, ge1(rxclk)
+mpp32 32 gpio, ge1(txclko)
+mpp33 33 gpo, ge1(txclk)
+mpp34 34 gpio, ge1(txen)
+mpp35 35 gpio, ge1(rxerr), sata0(act), mii(rxerr)
+
+* Marvell Kirkwood 88f6192
+
+name pins functions
+================================================================================
+mpp0 0 gpio, nand(io2), spi(cs)
+mpp1 1 gpo, nand(io3), spi(mosi)
+mpp2 2 gpo, nand(io4), spi(sck)
+mpp3 3 gpo, nand(io5), spi(miso)
+mpp4 4 gpio, nand(io6), uart0(rxd), ptp(clk), sata1(act)
+mpp5 5 gpo, nand(io7), uart0(txd), ptp(trig), sata0(act)
+mpp6 6 sysrst(out), spi(mosi), ptp(trig)
+mpp7 7 gpo, pex(rsto), spi(cs), ptp(trig)
+mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk),
+ mii(col), mii-1(rxerr), sata1(prsnt)
+mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq),
+ mii(crs), sata0(prsnt)
+mpp10 10 gpo, spi(sck), uart0(txd), ptp(trig), sata1(act)
+mpp11 11 gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq),
+ ptp-2(trig), sata0(act)
+mpp12 12 gpo, sdio(clk)
+mpp13 13 gpio, sdio(cmd), uart1(txd)
+mpp14 14 gpio, sdio(d0), uart1(rxd), mii(col), sata1(prsnt)
+mpp15 15 gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act)
+mpp16 16 gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs),
+ sata1(act)
+mpp17 17 gpio, sdio(d3), sata0(prsnt)
+mpp18 18 gpo, nand(io0)
+mpp19 19 gpo, nand(io1)
+mpp20 20 gpio, ge1(txd0), ts(mp0), tdm(tx0ql), audio(spdifi),
+ sata1(act)
+mpp21 21 gpio, ge1(txd1), sata0(act), ts(mp1), tdm(rx0ql),
+ audio(spdifo)
+mpp22 22 gpio, ge1(txd2), ts(mp2), tdm(tx2ql), audio(rmclk),
+ sata1(prsnt)
+mpp23 23 gpio, ge1(txd3), sata0(prsnt), ts(mp3), tdm(rx2ql),
+ audio(bclk)
+mpp24 24 gpio, ge1(rxd0), ts(mp4), tdm(spi-cs0), audio(sdo)
+mpp25 25 gpio, ge1(rxd1), ts(mp5), tdm(spi-sck), audio(lrclk)
+mpp26 26 gpio, ge1(rxd2), ts(mp6), tdm(spi-miso), audio(mclk)
+mpp27 27 gpio, ge1(rxd3), ts(mp7), tdm(spi-mosi), audio(sdi)
+mpp28 28 gpio, ge1(col), ts(mp8), tdm(int), audio(extclk)
+mpp29 29 gpio, ge1(txclk), ts(mp9), tdm(rst)
+mpp30 30 gpio, ge1(rxclk), ts(mp10), tdm(pclk)
+mpp31 31 gpio, ge1(rxclk), ts(mp11), tdm(fs)
+mpp32 32 gpio, ge1(txclko), ts(mp12), tdm(drx)
+mpp33 33 gpo, ge1(txclk), tdm(drx)
+mpp34 34 gpio, ge1(txen), tdm(spi-cs1)
+mpp35 35 gpio, ge1(rxerr), sata0(act), mii(rxerr), tdm(tx0ql)
+
+* Marvell Kirkwood 88f6281
+
+name pins functions
+================================================================================
+mpp0 0 gpio, nand(io2), spi(cs)
+mpp1 1 gpo, nand(io3), spi(mosi)
+mpp2 2 gpo, nand(io4), spi(sck)
+mpp3 3 gpo, nand(io5), spi(miso)
+mpp4 4 gpio, nand(io6), uart0(rxd), ptp(clk), sata1(act)
+mpp5 5 gpo, nand(io7), uart0(txd), ptp(trig), sata0(act)
+mpp6 6 sysrst(out), spi(mosi), ptp(trig)
+mpp7 7 gpo, pex(rsto), spi(cs), ptp(trig)
+mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk),
+ mii(col), mii-1(rxerr), sata1(prsnt)
+mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq),
+ mii(crs), sata0(prsnt)
+mpp10 10 gpo, spi(sck), uart0(txd), ptp(trig), sata1(act)
+mpp11 11 gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq),
+ ptp-2(trig), sata0(act)
+mpp12 12 gpio, sdio(clk)
+mpp13 13 gpio, sdio(cmd), uart1(txd)
+mpp14 14 gpio, sdio(d0), uart1(rxd), mii(col), sata1(prsnt)
+mpp15 15 gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act)
+mpp16 16 gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs),
+ sata1(act)
+mpp17 17 gpio, sdio(d3), sata0(prsnt)
+mpp18 18 gpo, nand(io0)
+mpp19 19 gpo, nand(io1)
+mpp20 20 gpio, ge1(txd0), ts(mp0), tdm(tx0ql), audio(spdifi),
+ sata1(act)
+mpp21 21 gpio, ge1(txd1), sata0(act), ts(mp1), tdm(rx0ql),
+ audio(spdifo)
+mpp22 22 gpio, ge1(txd2), ts(mp2), tdm(tx2ql), audio(rmclk),
+ sata1(prsnt)
+mpp23 23 gpio, ge1(txd3), sata0(prsnt), ts(mp3), tdm(rx2ql),
+ audio(bclk)
+mpp24 24 gpio, ge1(rxd0), ts(mp4), tdm(spi-cs0), audio(sdo)
+mpp25 25 gpio, ge1(rxd1), ts(mp5), tdm(spi-sck), audio(lrclk)
+mpp26 26 gpio, ge1(rxd2), ts(mp6), tdm(spi-miso), audio(mclk)
+mpp27 27 gpio, ge1(rxd3), ts(mp7), tdm(spi-mosi), audio(sdi)
+mpp28 28 gpio, ge1(col), ts(mp8), tdm(int), audio(extclk)
+mpp29 29 gpio, ge1(txclk), ts(mp9), tdm(rst)
+mpp30 30 gpio, ge1(rxclk), ts(mp10), tdm(pclk)
+mpp31 31 gpio, ge1(rxclk), ts(mp11), tdm(fs)
+mpp32 32 gpio, ge1(txclko), ts(mp12), tdm(drx)
+mpp33 33 gpo, ge1(txclk), tdm(drx)
+mpp34 34 gpio, ge1(txen), tdm(spi-cs1), sata1(act)
+mpp35 35 gpio, ge1(rxerr), sata0(act), mii(rxerr), tdm(tx0ql)
+mpp36 36 gpio, ts(mp0), tdm(spi-cs1), audio(spdifi)
+mpp37 37 gpio, ts(mp1), tdm(tx2ql), audio(spdifo)
+mpp38 38 gpio, ts(mp2), tdm(rx2ql), audio(rmclk)
+mpp39 39 gpio, ts(mp3), tdm(spi-cs0), audio(bclk)
+mpp40 40 gpio, ts(mp4), tdm(spi-sck), audio(sdo)
+mpp41 41 gpio, ts(mp5), tdm(spi-miso), audio(lrclk)
+mpp42 42 gpio, ts(mp6), tdm(spi-mosi), audio(mclk)
+mpp43 43 gpio, ts(mp7), tdm(int), audio(sdi)
+mpp44 44 gpio, ts(mp8), tdm(rst), audio(extclk)
+mpp45 45 gpio, ts(mp9), tdm(pclk)
+mpp46 46 gpio, ts(mp10), tdm(fs)
+mpp47 47 gpio, ts(mp11), tdm(drx)
+mpp48 48 gpio, ts(mp12), tdm(dtx)
+mpp49 49 gpio, ts(mp9), tdm(rx0ql), ptp(clk)
+
+* Marvell Kirkwood 88f6282
+
+name pins functions
+================================================================================
+mpp0 0 gpio, nand(io2), spi(cs)
+mpp1 1 gpo, nand(io3), spi(mosi)
+mpp2 2 gpo, nand(io4), spi(sck)
+mpp3 3 gpo, nand(io5), spi(miso)
+mpp4 4 gpio, nand(io6), uart0(rxd), sata1(act), lcd(hsync)
+mpp5 5 gpo, nand(io7), uart0(txd), sata0(act), lcd(vsync)
+mpp6 6 sysrst(out), spi(mosi)
+mpp7 7 gpo, spi(cs), lcd(pwm)
+mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts), mii(col),
+ mii-1(rxerr), sata1(prsnt)
+mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts), mii(crs),
+ sata0(prsnt)
+mpp10 10 gpo, spi(sck), uart0(txd), sata1(act)
+mpp11 11 gpio, spi(miso), uart0(rxd), sata0(act)
+mpp12 12 gpo, sdio(clk), audio(spdifo), spi(mosi), twsi(sda)
+mpp13 13 gpio, sdio(cmd), uart1(txd), audio(rmclk), lcd(pwm)
+mpp14 14 gpio, sdio(d0), uart1(rxd), mii(col), sata1(prsnt),
+ audio(spdifi), audio-1(sdi)
+mpp15 15 gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act),
+ spi(cs)
+mpp16 16 gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs),
+ sata1(act), lcd(extclk)
+mpp17 17 gpio, sdio(d3), sata0(prsnt), sata1(act), twsi1(sck)
+mpp18 18 gpo, nand(io0), pex(clkreq)
+mpp19 19 gpo, nand(io1)
+mpp20 20 gpio, ge1(txd0), ts(mp0), tdm(tx0ql), audio(spdifi),
+ sata1(act), lcd(d0)
+mpp21 21 gpio, ge1(txd1), sata0(act), ts(mp1), tdm(rx0ql),
+ audio(spdifo), lcd(d1)
+mpp22 22 gpio, ge1(txd2), ts(mp2), tdm(tx2ql), audio(rmclk),
+ sata1(prsnt), lcd(d2)
+mpp23 23 gpio, ge1(txd3), sata0(prsnt), ts(mp3), tdm(rx2ql),
+ audio(bclk), lcd(d3)
+mpp24 24 gpio, ge1(rxd0), ts(mp4), tdm(spi-cs0), audio(sdo),
+ lcd(d4)
+mpp25 25 gpio, ge1(rxd1), ts(mp5), tdm(spi-sck), audio(lrclk),
+ lcd(d5)
+mpp26 26 gpio, ge1(rxd2), ts(mp6), tdm(spi-miso), audio(mclk),
+ lcd(d6)
+mpp27 27 gpio, ge1(rxd3), ts(mp7), tdm(spi-mosi), audio(sdi),
+ lcd(d7)
+mpp28 28 gpio, ge1(col), ts(mp8), tdm(int), audio(extclk),
+ lcd(d8)
+mpp29 29 gpio, ge1(txclk), ts(mp9), tdm(rst), lcd(d9)
+mpp30 30 gpio, ge1(rxclk), ts(mp10), tdm(pclk), lcd(d10)
+mpp31 31 gpio, ge1(rxclk), ts(mp11), tdm(fs), lcd(d11)
+mpp32 32 gpio, ge1(txclko), ts(mp12), tdm(drx), lcd(d12)
+mpp33 33 gpo, ge1(txclk), tdm(drx), lcd(d13)
+mpp34 34 gpio, ge1(txen), tdm(spi-cs1), sata1(act), lcd(d14)
+mpp35 35 gpio, ge1(rxerr), sata0(act), mii(rxerr), tdm(tx0ql),
+ lcd(d15)
+mpp36 36 gpio, ts(mp0), tdm(spi-cs1), audio(spdifi), twsi1(sda)
+mpp37 37 gpio, ts(mp1), tdm(tx2ql), audio(spdifo), twsi1(sck)
+mpp38 38 gpio, ts(mp2), tdm(rx2ql), audio(rmclk), lcd(d18)
+mpp39 39 gpio, ts(mp3), tdm(spi-cs0), audio(bclk), lcd(d19)
+mpp40 40 gpio, ts(mp4), tdm(spi-sck), audio(sdo), lcd(d20)
+mpp41 41 gpio, ts(mp5), tdm(spi-miso), audio(lrclk), lcd(d21)
+mpp42 42 gpio, ts(mp6), tdm(spi-mosi), audio(mclk), lcd(d22)
+mpp43 43 gpio, ts(mp7), tdm(int), audio(sdi), lcd(d23)
+mpp44 44 gpio, ts(mp8), tdm(rst), audio(extclk), lcd(clk)
+mpp45 45 gpio, ts(mp9), tdm(pclk), lcd(e)
+mpp46 46 gpio, ts(mp10), tdm(fs), lcd(hsync)
+mpp47 47 gpio, ts(mp11), tdm(drx), lcd(vsync)
+mpp48 48 gpio, ts(mp12), tdm(dtx), lcd(d16)
+mpp49 49 gpo, tdm(rx0ql), pex(clkreq), lcd(d17)
+
+* Marvell Bobcat 98dx4122
+
+name pins functions
+================================================================================
+mpp0 0 gpio, nand(io2), spi(cs)
+mpp1 1 gpo, nand(io3), spi(mosi)
+mpp2 2 gpo, nand(io4), spi(sck)
+mpp3 3 gpo, nand(io5), spi(miso)
+mpp4 4 gpio, nand(io6), uart0(rxd)
+mpp5 5 gpo, nand(io7), uart0(txd)
+mpp6 6 sysrst(out), spi(mosi)
+mpp7 7 gpo, pex(rsto), spi(cs)
+mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts)
+mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts)
+mpp10 10 gpo, spi(sck), uart0(txd)
+mpp11 11 gpio, spi(miso), uart0(rxd)
+mpp13 13 gpio, uart1(txd)
+mpp14 14 gpio, uart1(rxd)
+mpp15 15 gpio, uart0(rts)
+mpp16 16 gpio, uart0(cts)
+mpp18 18 gpo, nand(io0)
+mpp19 19 gpo, nand(io1)
+mpp34 34 gpio
+mpp35 35 gpio
+mpp36 36 gpio
+mpp37 37 gpio
+mpp38 38 gpio
+mpp39 39 gpio
+mpp40 40 gpio
+mpp41 41 gpio
+mpp42 42 gpio
+mpp43 43 gpio
+mpp44 44 gpio
+mpp45 45 gpio
+mpp49 49 gpio
+
+* Marvell Poncat2 98dx1135
+
+name pins functions
+================================================================================
+
+mpp0 0 gpio, nand(io2), spi(cs)
+mpp1 1 gpo, nand(io3), spi(mosi)
+mpp2 2 gpo, nand(io4), spi(sck)
+mpp3 3 gpo, nand(io5), spi(miso)
+mpp4 4 gpio, nand(io6), uart0(rxd)
+mpp5 5 gpo, nand(io7), uart0(txd)
+mpp6 6 sysrst(out)
+mpp7 7 gpo, spi(cs)
+mpp8 8 gpio, twsi0(sda), uart1(rts)
+mpp9 9 gpio, twsi(sck), uart1(cts)
+mpp10 10 gpo, uart0(txd)
+mpp11 11 gpio, uart0(rxd)
+mpp13 13 gpio, uart1(txd)
+mpp14 14 gpio, uart1(rxd)
+mpp15 15 gpio, uart0(rts)
+mpp16 16 gpio, uart0(cts)
+mpp17 17 gpio, nand(cle)
+mpp18 18 gpo, nand(io0)
+mpp19 19 gpo, nand(io1)
+mpp20 20 gpio
+mpp21 21 gpio
+mpp22 22 gpio
+mpp23 23 gpio
+mpp24 24 gpio
+mpp25 25 gpio
+mpp26 26 gpio
+mpp27 27 gpio
+mpp28 28 gpio, nand(ren)
+mpp29 29 gpio, nand(wen)
+mpp30 30 gpio
+mpp31 31 gpio
+mpp32 32 gpio
+mpp33 33 gpio
+mpp34 34 gpio, nand(ale)
+mpp35 35 gpio, nand(cen)
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt
new file mode 100644
index 0000000000..0c09f4eb2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt
@@ -0,0 +1,46 @@
+* Marvell SoC pinctrl core driver for mpp
+
+The pinctrl driver enables Marvell SoCs to configure the multi-purpose pins
+(mpp) to a specific function. For each SoC family there is a SoC specific
+driver using this core driver.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+A Marvell SoC pin configuration node is a node of a group of pins which can
+be used for a specific device or function. Each node requires one or more
+mpp pins or group of pins and a mpp function common to all pins.
+
+Required properties for pinctrl driver:
+- compatible: "marvell,<soc>-pinctrl"
+ Please refer to each marvell,<soc>-pinctrl.txt binding doc for supported SoCs.
+
+Required properties for pin configuration node:
+- marvell,pins: string array of mpp pins or group of pins to be muxed.
+- marvell,function: string representing a function to mux to for all
+ marvell,pins given in this pin configuration node. The function has to be
+ common for all marvell,pins. Please refer to marvell,<soc>-pinctrl.txt for
+ valid pin/pin group names and available function names for each SoC.
+
+Examples:
+
+uart1: serial@12100 {
+ compatible = "ns16550a";
+ reg = <0x12100 0x100>;
+ reg-shift = <2>;
+ interrupts = <7>;
+
+ pinctrl-0 = <&pmx_uart1_sw>;
+ pinctrl-names = "default";
+};
+
+pinctrl: pinctrl@d0200 {
+ compatible = "marvell,dove-pinctrl";
+ reg = <0xd0200 0x14>, <0xd0440 0x04>, <0xd802c 0x08>;
+
+ pmx_uart1_sw: pmx-uart1-sw {
+ marvell,pins = "mpp_uart1";
+ marvell,function = "uart1";
+ };
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,orion-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,orion-pinctrl.txt
new file mode 100644
index 0000000000..ec8aa3c693
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,orion-pinctrl.txt
@@ -0,0 +1,93 @@
+* Marvell Orion SoC pinctrl driver for mpp
+
+Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
+part and usage.
+
+Required properties:
+- compatible: "marvell,88f5181-pinctrl",
+ "marvell,88f5181l-pinctrl",
+ "marvell,88f5182-pinctrl",
+ "marvell,88f5281-pinctrl"
+
+- reg: two register areas, the first one describing the first two
+ contiguous MPP registers, and the second one describing the single
+ final MPP register, separated from the previous one.
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+* Marvell Orion 88f5181l
+
+name pins functions
+================================================================================
+mpp0 0 pcie(rstout), pci(req2), gpio
+mpp1 1 gpio, pci(gnt2)
+mpp2 2 gpio, pci(req3), pci-1(pme)
+mpp3 3 gpio, pci(gnt3)
+mpp4 4 gpio, pci(req4)
+mpp5 5 gpio, pci(gnt4)
+mpp6 6 gpio, pci(req5), pci-1(clk)
+mpp7 7 gpio, pci(gnt5), pci-1(clk)
+mpp8 8 gpio, ge(col)
+mpp9 9 gpio, ge(rxerr)
+mpp10 10 gpio, ge(crs)
+mpp11 11 gpio, ge(txerr)
+mpp12 12 gpio, ge(txd4)
+mpp13 13 gpio, ge(txd5)
+mpp14 14 gpio, ge(txd6)
+mpp15 15 gpio, ge(txd7)
+mpp16 16 ge(rxd4)
+mpp17 17 ge(rxd5)
+mpp18 18 ge(rxd6)
+mpp19 19 ge(rxd7)
+
+* Marvell Orion 88f5182
+
+name pins functions
+================================================================================
+mpp0 0 pcie(rstout), pci(req2), gpio
+mpp1 1 gpio, pci(gnt2)
+mpp2 2 gpio, pci(req3), pci-1(pme)
+mpp3 3 gpio, pci(gnt3)
+mpp4 4 gpio, pci(req4), bootnand(re), sata0(prsnt)
+mpp5 5 gpio, pci(gnt4), bootnand(we), sata1(prsnt)
+mpp6 6 gpio, pci(req5), nand(re0), sata0(act)
+mpp7 7 gpio, pci(gnt5), nand(we0), sata1(act)
+mpp8 8 gpio, ge(col)
+mpp9 9 gpio, ge(rxerr)
+mpp10 10 gpio, ge(crs)
+mpp11 11 gpio, ge(txerr)
+mpp12 12 gpio, ge(txd4), nand(re1), sata0(ledprsnt)
+mpp13 13 gpio, ge(txd5), nand(we1), sata1(ledprsnt)
+mpp14 14 gpio, ge(txd6), nand(re2), sata0(ledact)
+mpp15 15 gpio, ge(txd7), nand(we2), sata1(ledact)
+mpp16 16 uart1(rxd), ge(rxd4), gpio
+mpp17 17 uart1(txd), ge(rxd5), gpio
+mpp18 18 uart1(cts), ge(rxd6), gpio
+mpp19 19 uart1(rts), ge(rxd7), gpio
+
+* Marvell Orion 88f5281
+
+name pins functions
+================================================================================
+mpp0 0 pcie(rstout), pci(req2), gpio
+mpp1 1 gpio, pci(gnt2)
+mpp2 2 gpio, pci(req3), pci(pme)
+mpp3 3 gpio, pci(gnt3)
+mpp4 4 gpio, pci(req4), bootnand(re)
+mpp5 5 gpio, pci(gnt4), bootnand(we)
+mpp6 6 gpio, pci(req5), nand(re0)
+mpp7 7 gpio, pci(gnt5), nand(we0)
+mpp8 8 gpio, ge(col)
+mpp9 9 gpio, ge(rxerr)
+mpp10 10 gpio, ge(crs)
+mpp11 11 gpio, ge(txerr)
+mpp12 12 gpio, ge(txd4), nand(re1)
+mpp13 13 gpio, ge(txd5), nand(we1)
+mpp14 14 gpio, ge(txd6), nand(re2)
+mpp15 15 gpio, ge(txd7), nand(we2)
+mpp16 16 uart1(rxd), ge(rxd4)
+mpp17 17 uart1(txd), ge(rxd5)
+mpp18 18 uart1(cts), ge(rxd6)
+mpp19 19 uart1(rts), ge(rxd7)
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
new file mode 100644
index 0000000000..bccff08a5b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
@@ -0,0 +1,210 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt65xx-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT65xx Pin Controller
+
+maintainers:
+ - Sean Wang <sean.wang@kernel.org>
+
+description:
+ The MediaTek's MT65xx Pin controller is used to control SoC pins.
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt2701-pinctrl
+ - mediatek,mt2712-pinctrl
+ - mediatek,mt6397-pinctrl
+ - mediatek,mt7623-pinctrl
+ - mediatek,mt8127-pinctrl
+ - mediatek,mt8135-pinctrl
+ - mediatek,mt8167-pinctrl
+ - mediatek,mt8173-pinctrl
+ - mediatek,mt8516-pinctrl
+
+ reg:
+ maxItems: 1
+
+ pins-are-numbered:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Specify the subnodes are using numbered pinmux to specify pins. (UNUSED)
+ deprecated: true
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+ description:
+ Number of cells in GPIO specifier. Since the generic GPIO binding is used,
+ the amount of cells must be specified as 2. See the below mentioned gpio
+ binding representation for description of particular cells.
+
+ mediatek,pctl-regmap:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ maxItems: 1
+ minItems: 1
+ maxItems: 2
+ description:
+ Should be phandles of the syscfg node.
+
+ interrupt-controller: true
+
+ interrupts:
+ minItems: 1
+ maxItems: 3
+
+ "#interrupt-cells":
+ const: 2
+
+required:
+ - compatible
+ - gpio-controller
+ - "#gpio-cells"
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+patternProperties:
+ 'pins$':
+ type: object
+ additionalProperties: false
+ patternProperties:
+ '(^pins|pins?$)':
+ type: object
+ additionalProperties: false
+ description:
+ A pinctrl node should contain at least one subnodes representing the
+ pinctrl groups available on the machine. Each subnode will list the
+ pins it needs, and how they should be configured, with regard to muxer
+ configuration, pullups, drive strength, input enable/disable and input
+ schmitt.
+ $ref: /schemas/pinctrl/pincfg-node.yaml
+
+ properties:
+ pinmux:
+ description:
+ Integer array, represents gpio pin number and mux setting.
+ Supported pin number and mux varies for different SoCs, and are
+ defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly.
+
+ bias-disable: true
+
+ bias-pull-up:
+ description:
+ Besides generic pinconfig options, it can be used as the pull up
+ settings for 2 pull resistors, R0 and R1. User can configure those
+ special pins. Some macros have been defined for this usage, such
+ as MTK_PUPD_SET_R1R0_00. See dt-bindings/pinctrl/mt65xx.h for
+ valid arguments.
+
+ bias-pull-down: true
+
+ input-enable: true
+
+ input-disable: true
+
+ output-low: true
+
+ output-high: true
+
+ input-schmitt-enable: true
+
+ input-schmitt-disable: true
+
+ drive-strength:
+ description:
+ Can support some arguments, such as MTK_DRIVE_4mA, MTK_DRIVE_6mA,
+ etc. See dt-bindings/pinctrl/mt65xx.h for valid arguments.
+
+ required:
+ - pinmux
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/pinctrl/mt8135-pinfunc.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ syscfg_pctl_a: syscfg-pctl-a@10005000 {
+ compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon";
+ reg = <0 0x10005000 0 0x1000>;
+ };
+
+ syscfg_pctl_b: syscfg-pctl-b@1020c020 {
+ compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon";
+ reg = <0 0x1020C020 0 0x1000>;
+ };
+
+ pinctrl@1c20800 {
+ compatible = "mediatek,mt8135-pinctrl";
+ reg = <0 0x1000B000 0 0x1000>;
+ mediatek,pctl-regmap = <&syscfg_pctl_a>, <&syscfg_pctl_b>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+
+ i2c0_pins_a: i2c0-pins {
+ pins1 {
+ pinmux = <MT8135_PIN_100_SDA0__FUNC_SDA0>,
+ <MT8135_PIN_101_SCL0__FUNC_SCL0>;
+ bias-disable;
+ };
+ };
+
+ i2c1_pins_a: i2c1-pins {
+ pins {
+ pinmux = <MT8135_PIN_195_SDA1__FUNC_SDA1>,
+ <MT8135_PIN_196_SCL1__FUNC_SCL1>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+ };
+
+ i2c2_pins_a: i2c2-pins {
+ pins1 {
+ pinmux = <MT8135_PIN_193_SDA2__FUNC_SDA2>;
+ bias-pull-down;
+ };
+
+ pins2 {
+ pinmux = <MT8135_PIN_49_WATCHDOG__FUNC_GPIO49>;
+ bias-pull-up;
+ };
+ };
+
+ i2c3_pins_a: i2c3-pins {
+ pins1 {
+ pinmux = <MT8135_PIN_40_DAC_CLK__FUNC_GPIO40>,
+ <MT8135_PIN_41_DAC_WS__FUNC_GPIO41>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins2 {
+ pinmux = <MT8135_PIN_35_SCL3__FUNC_SCL3>,
+ <MT8135_PIN_36_SDA3__FUNC_SDA3>;
+ output-low;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins3 {
+ pinmux = <MT8135_PIN_57_JTCK__FUNC_GPIO57>,
+ <MT8135_PIN_60_JTDI__FUNC_JTDI>;
+ drive-strength = <32>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
new file mode 100644
index 0000000000..3bbc00df55
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
@@ -0,0 +1,253 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt6779-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6779 Pin Controller
+
+maintainers:
+ - Andy Teng <andy.teng@mediatek.com>
+ - Sean Wang <sean.wang@kernel.org>
+
+description:
+ The MediaTek pin controller on MT6779 is used to control pin functions, pull
+ up/down resistance and drive strength options.
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt6779-pinctrl
+ - mediatek,mt6797-pinctrl
+
+ reg:
+ description: Physical addresses for GPIO base(s) and EINT registers.
+
+ reg-names: true
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+ description:
+ Number of cells in GPIO specifier. Since the generic GPIO binding is used,
+ the amount of cells must be specified as 2. See the below mentioned gpio
+ binding representation for description of particular cells.
+
+ gpio-ranges:
+ minItems: 1
+ maxItems: 5
+ description:
+ GPIO valid number range.
+
+ interrupt-controller: true
+
+ interrupts:
+ maxItems: 1
+ description:
+ Specifies the summary IRQ.
+
+ "#interrupt-cells":
+ const: 2
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - gpio-controller
+ - "#gpio-cells"
+
+allOf:
+ - $ref: pinctrl.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: mediatek,mt6779-pinctrl
+ then:
+ properties:
+ reg:
+ minItems: 9
+ maxItems: 9
+
+ reg-names:
+ items:
+ - const: gpio
+ - const: iocfg_rm
+ - const: iocfg_br
+ - const: iocfg_lm
+ - const: iocfg_lb
+ - const: iocfg_rt
+ - const: iocfg_lt
+ - const: iocfg_tl
+ - const: eint
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: mediatek,mt6797-pinctrl
+ then:
+ properties:
+ reg:
+ minItems: 5
+ maxItems: 5
+
+ reg-names:
+ items:
+ - const: gpio
+ - const: iocfgl
+ - const: iocfgb
+ - const: iocfgr
+ - const: iocfgt
+ - if:
+ properties:
+ reg-names:
+ contains:
+ const: eint
+ then:
+ required:
+ - interrupts
+ - interrupt-controller
+ - "#interrupt-cells"
+
+patternProperties:
+ '-[0-9]*$':
+ type: object
+ additionalProperties: false
+
+ patternProperties:
+ '-pins*$':
+ type: object
+ description:
+ A pinctrl node should contain at least one subnodes representing the
+ pinctrl groups available on the machine. Each subnode will list the
+ pins it needs, and how they should be configured, with regard to muxer
+ configuration, pullups, drive strength, input enable/disable and input
+ schmitt.
+ $ref: /schemas/pinctrl/pincfg-node.yaml
+
+ properties:
+ pinmux:
+ description:
+ Integer array, represents gpio pin number and mux setting.
+ Supported pin number and mux varies for different SoCs, and are
+ defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly.
+
+ bias-disable: true
+
+ bias-pull-up: true
+
+ bias-pull-down: true
+
+ input-enable: true
+
+ input-disable: true
+
+ output-low: true
+
+ output-high: true
+
+ input-schmitt-enable: true
+
+ input-schmitt-disable: true
+
+ drive-strength:
+ enum: [2, 4, 8, 12, 16]
+
+ slew-rate:
+ enum: [0, 1]
+
+ mediatek,pull-up-adv:
+ description: |
+ Pull up settings for 2 pull resistors, R0 and R1. User can
+ configure those special pins. Valid arguments are described as
+ below:
+ 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+ 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+ 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+ 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+
+ mediatek,pull-down-adv:
+ description: |
+ Pull down settings for 2 pull resistors, R0 and R1. User can
+ configure those special pins. Valid arguments are described as
+ below:
+ 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+ 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+ 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+ 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+
+ required:
+ - pinmux
+
+ additionalProperties: false
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/pinctrl/mt6779-pinfunc.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pio: pinctrl@10005000 {
+ compatible = "mediatek,mt6779-pinctrl";
+ reg = <0 0x10005000 0 0x1000>,
+ <0 0x11c20000 0 0x1000>,
+ <0 0x11d10000 0 0x1000>,
+ <0 0x11e20000 0 0x1000>,
+ <0 0x11e70000 0 0x1000>,
+ <0 0x11ea0000 0 0x1000>,
+ <0 0x11f20000 0 0x1000>,
+ <0 0x11f30000 0 0x1000>,
+ <0 0x1000b000 0 0x1000>;
+ reg-names = "gpio", "iocfg_rm",
+ "iocfg_br", "iocfg_lm",
+ "iocfg_lb", "iocfg_rt",
+ "iocfg_lt", "iocfg_tl",
+ "eint";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pio 0 0 210>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+
+ mmc0_pins_default: mmc0-0 {
+ cmd-dat-pins {
+ pinmux = <PINMUX_GPIO168__FUNC_MSDC0_DAT0>,
+ <PINMUX_GPIO172__FUNC_MSDC0_DAT1>,
+ <PINMUX_GPIO169__FUNC_MSDC0_DAT2>,
+ <PINMUX_GPIO177__FUNC_MSDC0_DAT3>,
+ <PINMUX_GPIO170__FUNC_MSDC0_DAT4>,
+ <PINMUX_GPIO173__FUNC_MSDC0_DAT5>,
+ <PINMUX_GPIO171__FUNC_MSDC0_DAT6>,
+ <PINMUX_GPIO174__FUNC_MSDC0_DAT7>,
+ <PINMUX_GPIO167__FUNC_MSDC0_CMD>;
+ input-enable;
+ mediatek,pull-up-adv = <1>;
+ };
+ clk-pins {
+ pinmux = <PINMUX_GPIO176__FUNC_MSDC0_CLK>;
+ mediatek,pull-down-adv = <2>;
+ };
+ rst-pins {
+ pinmux = <PINMUX_GPIO178__FUNC_MSDC0_RSTB>;
+ mediatek,pull-up-adv = <0>;
+ };
+ };
+ };
+
+ mmc0 {
+ pinctrl-0 = <&mmc0_pins_default>;
+ pinctrl-names = "default";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6795-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6795-pinctrl.yaml
new file mode 100644
index 0000000000..68e91c05f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6795-pinctrl.yaml
@@ -0,0 +1,228 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt6795-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6795 Pin Controller
+
+maintainers:
+ - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ - Sean Wang <sean.wang@kernel.org>
+
+description:
+ The MediaTek's MT6795 Pin controller is used to control SoC pins.
+
+properties:
+ compatible:
+ const: mediatek,mt6795-pinctrl
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ description:
+ Number of cells in GPIO specifier. Since the generic GPIO binding is used,
+ the amount of cells must be specified as 2. See the below mentioned gpio
+ binding representation for description of particular cells.
+ const: 2
+
+ gpio-ranges:
+ description: GPIO valid number range.
+ maxItems: 1
+
+ reg:
+ description:
+ Physical address base for GPIO base and eint registers.
+ minItems: 2
+
+ reg-names:
+ items:
+ - const: base
+ - const: eint
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+ interrupts:
+ description: Interrupt outputs to the system interrupt controller (sysirq).
+ minItems: 1
+ items:
+ - description: EINT interrupt
+ - description: EINT event_b interrupt
+
+# PIN CONFIGURATION NODES
+patternProperties:
+ '-pins$':
+ type: object
+ additionalProperties: false
+ patternProperties:
+ '^pins':
+ type: object
+ additionalProperties: false
+ description: |
+ A pinctrl node should contain at least one subnodes representing the
+ pinctrl groups available on the machine. Each subnode will list the
+ pins it needs, and how they should be configured, with regard to muxer
+ configuration, pullups, drive strength, input enable/disable and input
+ schmitt.
+ An example of using macro:
+ pincontroller {
+ /* GPIO0 set as multifunction GPIO0 */
+ gpio-pins {
+ pins {
+ pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
+ }
+ };
+ /* GPIO45 set as multifunction SDA0 */
+ i2c0-pins {
+ pins {
+ pinmux = <PINMUX_GPIO45__FUNC_SDA0>;
+ }
+ };
+ };
+ $ref: pinmux-node.yaml
+
+ properties:
+ pinmux:
+ description:
+ Integer array, represents gpio pin number and mux setting.
+ Supported pin number and mux varies for different SoCs, and are
+ defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly.
+
+ drive-strength:
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+ bias-pull-down:
+ oneOf:
+ - type: boolean
+ - enum: [100, 101, 102, 103]
+ description: mt6795 pull down PUPD/R0/R1 type define value.
+ description:
+ For normal pull down type, it is not necessary to specify R1R0
+ values; When pull down type is PUPD/R0/R1, adding R1R0 defines
+ will set different resistance values.
+
+ bias-pull-up:
+ oneOf:
+ - type: boolean
+ - enum: [100, 101, 102, 103]
+ description: mt6795 pull up PUPD/R0/R1 type define value.
+ description:
+ For normal pull up type, it is not necessary to specify R1R0
+ values; When pull up type is PUPD/R0/R1, adding R1R0 defines will
+ set different resistance values.
+
+ bias-disable: true
+
+ output-high: true
+
+ output-low: true
+
+ input-enable: true
+
+ input-disable: true
+
+ input-schmitt-enable: true
+
+ input-schmitt-disable: true
+
+ mediatek,pull-up-adv:
+ description: |
+ Pull up settings for 2 pull resistors, R0 and R1. User can
+ configure those special pins. Valid arguments are described as
+ below:
+ 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+ 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+ 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+ 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+
+ mediatek,pull-down-adv:
+ description: |
+ Pull down settings for 2 pull resistors, R0 and R1. User can
+ configure those special pins. Valid arguments are described as
+ below:
+ 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+ 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+ 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+ 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+
+ required:
+ - pinmux
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/pinctrl/mt6795-pinfunc.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pio: pinctrl@10005000 {
+ compatible = "mediatek,mt6795-pinctrl";
+ reg = <0 0x10005000 0 0x1000>, <0 0x1000b000 0 0x1000>;
+ reg-names = "base", "eint";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pio 0 0 196>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+
+ i2c0-pins {
+ pins-sda-scl {
+ pinmux = <PINMUX_GPIO45__FUNC_SDA0>,
+ <PINMUX_GPIO46__FUNC_SCL0>;
+ };
+ };
+
+ mmc0-pins {
+ pins-cmd-dat {
+ pinmux = <PINMUX_GPIO154__FUNC_MSDC0_DAT0>,
+ <PINMUX_GPIO155__FUNC_MSDC0_DAT1>,
+ <PINMUX_GPIO156__FUNC_MSDC0_DAT2>,
+ <PINMUX_GPIO157__FUNC_MSDC0_DAT3>,
+ <PINMUX_GPIO158__FUNC_MSDC0_DAT4>,
+ <PINMUX_GPIO159__FUNC_MSDC0_DAT5>,
+ <PINMUX_GPIO160__FUNC_MSDC0_DAT6>,
+ <PINMUX_GPIO161__FUNC_MSDC0_DAT7>,
+ <PINMUX_GPIO162__FUNC_MSDC0_CMD>;
+ input-enable;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins-clk {
+ pinmux = <PINMUX_GPIO163__FUNC_MSDC0_CLK>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins-rst {
+ pinmux = <PINMUX_GPIO165__FUNC_MSDC0_RSTB>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7620-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7620-pinctrl.yaml
new file mode 100644
index 0000000000..591bc0664e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7620-pinctrl.yaml
@@ -0,0 +1,298 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt7620-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7620 Pin Controller
+
+maintainers:
+ - Arınç ÜNAL <arinc.unal@arinc9.com>
+ - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |
+ MediaTek MT7620 pin controller for MT7620 SoC.
+ The pin controller can only set the muxing of pin groups. Muxing individual
+ pins is not supported. There is no pinconf support.
+
+properties:
+ compatible:
+ const: ralink,mt7620-pinctrl
+
+patternProperties:
+ '-pins$':
+ type: object
+ additionalProperties: false
+
+ patternProperties:
+ '^(.*-)?pinmux$':
+ type: object
+ description: node for pinctrl.
+ $ref: pinmux-node.yaml#
+ additionalProperties: false
+
+ properties:
+ function:
+ description:
+ A string containing the name of the function to mux to the group.
+ enum: [ephy, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, mdio, nand,
+ pa, pcie refclk, pcie rst, pcm gpio, pcm i2s, pcm uartf,
+ refclk, rgmii1, rgmii2, sd, spi, spi refclk, uartf, uartlite,
+ wdt refclk, wdt rst, wled]
+
+ groups:
+ description:
+ An array of strings. Each string contains the name of a group.
+ maxItems: 1
+
+ required:
+ - groups
+ - function
+
+ allOf:
+ - if:
+ properties:
+ function:
+ const: ephy
+ then:
+ properties:
+ groups:
+ enum: [ephy]
+
+ - if:
+ properties:
+ function:
+ const: gpio
+ then:
+ properties:
+ groups:
+ enum: [ephy, i2c, mdio, nd_sd, pa, pcie, rgmii1, rgmii2, spi,
+ spi refclk, uartf, uartlite, wdt, wled]
+
+ - if:
+ properties:
+ function:
+ const: gpio i2s
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: gpio uartf
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: i2c
+ then:
+ properties:
+ groups:
+ enum: [i2c]
+
+ - if:
+ properties:
+ function:
+ const: i2s uartf
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: mdio
+ then:
+ properties:
+ groups:
+ enum: [mdio]
+
+ - if:
+ properties:
+ function:
+ const: nand
+ then:
+ properties:
+ groups:
+ enum: [nd_sd]
+
+ - if:
+ properties:
+ function:
+ const: pa
+ then:
+ properties:
+ groups:
+ enum: [pa]
+
+ - if:
+ properties:
+ function:
+ const: pcie refclk
+ then:
+ properties:
+ groups:
+ enum: [pcie]
+
+ - if:
+ properties:
+ function:
+ const: pcie rst
+ then:
+ properties:
+ groups:
+ enum: [pcie]
+
+ - if:
+ properties:
+ function:
+ const: pcm gpio
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: pcm i2s
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: pcm uartf
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: refclk
+ then:
+ properties:
+ groups:
+ enum: [mdio]
+
+ - if:
+ properties:
+ function:
+ const: rgmii1
+ then:
+ properties:
+ groups:
+ enum: [rgmii1]
+
+ - if:
+ properties:
+ function:
+ const: rgmii2
+ then:
+ properties:
+ groups:
+ enum: [rgmii2]
+
+ - if:
+ properties:
+ function:
+ const: sd
+ then:
+ properties:
+ groups:
+ enum: [nd_sd]
+
+ - if:
+ properties:
+ function:
+ const: spi
+ then:
+ properties:
+ groups:
+ enum: [spi]
+
+ - if:
+ properties:
+ function:
+ const: spi refclk
+ then:
+ properties:
+ groups:
+ enum: [spi refclk]
+
+ - if:
+ properties:
+ function:
+ const: uartf
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: uartlite
+ then:
+ properties:
+ groups:
+ enum: [uartlite]
+
+ - if:
+ properties:
+ function:
+ const: wdt refclk
+ then:
+ properties:
+ groups:
+ enum: [wdt]
+
+ - if:
+ properties:
+ function:
+ const: wdt rst
+ then:
+ properties:
+ groups:
+ enum: [wdt]
+
+ - if:
+ properties:
+ function:
+ const: wled
+ then:
+ properties:
+ groups:
+ enum: [wled]
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ pinctrl {
+ compatible = "ralink,mt7620-pinctrl";
+
+ i2c_pins: i2c0-pins {
+ pinmux {
+ groups = "i2c";
+ function = "i2c";
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7621-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7621-pinctrl.yaml
new file mode 100644
index 0000000000..e568b9c137
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7621-pinctrl.yaml
@@ -0,0 +1,261 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt7621-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7621 Pin Controller
+
+maintainers:
+ - Arınç ÜNAL <arinc.unal@arinc9.com>
+ - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |
+ MediaTek MT7621 pin controller for MT7621 SoC.
+ The pin controller can only set the muxing of pin groups. Muxing individual
+ pins is not supported. There is no pinconf support.
+
+properties:
+ compatible:
+ const: ralink,mt7621-pinctrl
+
+patternProperties:
+ '-pins$':
+ type: object
+ additionalProperties: false
+
+ patternProperties:
+ '^(.*-)?pinmux$':
+ type: object
+ description: node for pinctrl.
+ $ref: pinmux-node.yaml#
+ additionalProperties: false
+
+ properties:
+ function:
+ description:
+ A string containing the name of the function to mux to the group.
+ enum: [gpio, i2c, i2s, jtag, mdio, nand1, nand2, pcie refclk,
+ pcie rst, pcm, rgmii1, rgmii2, sdhci, spdif2, spdif3, spi,
+ uart1, uart2, uart3, wdt refclk, wdt rst]
+
+ groups:
+ description:
+ An array of strings. Each string contains the name of a group.
+ maxItems: 1
+
+ required:
+ - groups
+ - function
+
+ allOf:
+ - if:
+ properties:
+ function:
+ const: gpio
+ then:
+ properties:
+ groups:
+ enum: [i2c, jtag, mdio, pcie, rgmii1, rgmii2, sdhci, spi,
+ uart1, uart2, uart3, wdt]
+
+ - if:
+ properties:
+ function:
+ const: i2c
+ then:
+ properties:
+ groups:
+ enum: [i2c]
+
+ - if:
+ properties:
+ function:
+ const: i2s
+ then:
+ properties:
+ groups:
+ enum: [uart3]
+
+ - if:
+ properties:
+ function:
+ const: jtag
+ then:
+ properties:
+ groups:
+ enum: [jtag]
+
+ - if:
+ properties:
+ function:
+ const: mdio
+ then:
+ properties:
+ groups:
+ enum: [mdio]
+
+ - if:
+ properties:
+ function:
+ const: nand1
+ then:
+ properties:
+ groups:
+ enum: [spi]
+
+ - if:
+ properties:
+ function:
+ const: nand2
+ then:
+ properties:
+ groups:
+ enum: [sdhci]
+
+ - if:
+ properties:
+ function:
+ const: pcie refclk
+ then:
+ properties:
+ groups:
+ enum: [pcie]
+
+ - if:
+ properties:
+ function:
+ const: pcie rst
+ then:
+ properties:
+ groups:
+ enum: [pcie]
+
+ - if:
+ properties:
+ function:
+ const: pcm
+ then:
+ properties:
+ groups:
+ enum: [uart2]
+
+ - if:
+ properties:
+ function:
+ const: rgmii1
+ then:
+ properties:
+ groups:
+ enum: [rgmii1]
+
+ - if:
+ properties:
+ function:
+ const: rgmii2
+ then:
+ properties:
+ groups:
+ enum: [rgmii2]
+
+ - if:
+ properties:
+ function:
+ const: sdhci
+ then:
+ properties:
+ groups:
+ enum: [sdhci]
+
+ - if:
+ properties:
+ function:
+ const: spdif2
+ then:
+ properties:
+ groups:
+ enum: [uart2]
+
+ - if:
+ properties:
+ function:
+ const: spdif3
+ then:
+ properties:
+ groups:
+ enum: [uart3]
+
+ - if:
+ properties:
+ function:
+ const: spi
+ then:
+ properties:
+ groups:
+ enum: [spi]
+
+ - if:
+ properties:
+ function:
+ const: uart1
+ then:
+ properties:
+ groups:
+ enum: [uart1]
+
+ - if:
+ properties:
+ function:
+ const: uart2
+ then:
+ properties:
+ groups:
+ enum: [uart2]
+
+ - if:
+ properties:
+ function:
+ const: uart3
+ then:
+ properties:
+ groups:
+ enum: [uart3]
+
+ - if:
+ properties:
+ function:
+ const: wdt refclk
+ then:
+ properties:
+ groups:
+ enum: [wdt]
+
+ - if:
+ properties:
+ function:
+ const: wdt rst
+ then:
+ properties:
+ groups:
+ enum: [wdt]
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ pinctrl {
+ compatible = "ralink,mt7621-pinctrl";
+
+ i2c_pins: i2c0-pins {
+ pinmux {
+ groups = "i2c";
+ function = "i2c";
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
new file mode 100644
index 0000000000..bd72a326e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
@@ -0,0 +1,376 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt7622-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7622 Pin Controller
+
+maintainers:
+ - Sean Wang <sean.wang@kernel.org>
+
+description:
+ The MediaTek's MT7622 Pin controller is used to control SoC pins.
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt7622-pinctrl
+ - mediatek,mt7629-pinctrl
+
+ reg:
+ maxItems: 1
+
+ reg-names:
+ items:
+ - const: eint
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+ description:
+ Number of cells in GPIO specifier. Since the generic GPIO binding is used,
+ the amount of cells must be specified as 2. See the below mentioned gpio
+ binding representation for description of particular cells.
+
+ interrupt-controller: true
+
+ interrupts:
+ maxItems: 1
+
+ "#interrupt-cells":
+ const: 2
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - "#gpio-cells"
+
+if:
+ required:
+ - interrupt-controller
+then:
+ required:
+ - reg-names
+ - interrupts
+ - "#interrupt-cells"
+
+patternProperties:
+ '-pins(-[a-z]+)?$':
+ type: object
+ additionalProperties: false
+ patternProperties:
+ '^mux(-|$)':
+ type: object
+ additionalProperties: false
+ description:
+ pinmux configuration nodes.
+ $ref: /schemas/pinctrl/pinmux-node.yaml
+ properties:
+ function:
+ description:
+ A string containing the name of the function to mux to the group.
+ enum: [emmc, eth, i2c, i2s, ir, led, flash, pcie, pmic, pwm, sd,
+ spi, tdm, uart, watchdog, wifi]
+
+ groups:
+ description:
+ An array of strings. Each string contains the name of a group.
+
+ drive-strength:
+ enum: [4, 8, 12, 16]
+
+ required:
+ - groups
+ - function
+
+ allOf:
+ - if:
+ properties:
+ function:
+ const: emmc
+ then:
+ properties:
+ groups:
+ enum: [emmc, emmc_rst]
+ - if:
+ properties:
+ function:
+ const: eth
+ then:
+ properties:
+ groups:
+ enum: [esw, esw_p0_p1, esw_p2_p3_p4, rgmii_via_esw,
+ rgmii_via_gmac1, rgmii_via_gmac2, mdc_mdio]
+ - if:
+ properties:
+ function:
+ const: i2c
+ then:
+ properties:
+ groups:
+ enum: [i2c0, i2c_0, i2c_1, i2c1_0, i2c1_1, i2c1_2, i2c2_0,
+ i2c2_1, i2c2_2]
+ - if:
+ properties:
+ function:
+ const: i2s
+ then:
+ properties:
+ groups:
+ enum: [i2s_in_mclk_bclk_ws, i2s1_in_data, i2s2_in_data,
+ i2s3_in_data, i2s4_in_data, i2s_out_mclk_bclk_ws,
+ i2s1_out_data, i2s2_out_data, i2s3_out_data,
+ i2s4_out_data]
+ - if:
+ properties:
+ function:
+ const: ir
+ then:
+ properties:
+ groups:
+ enum: [ir_0_tx, ir_1_tx, ir_2_tx, ir_0_rx, ir_1_rx, ir_2_rx]
+ - if:
+ properties:
+ function:
+ const: led
+ then:
+ properties:
+ groups:
+ enum: [ephy_leds, ephy0_led, ephy1_led, ephy2_led, ephy3_led,
+ ephy4_led, wled, wf2g_led, wf5g_led]
+ - if:
+ properties:
+ function:
+ const: flash
+ then:
+ properties:
+ groups:
+ enum: [par_nand, snfi, spi_nor]
+ - if:
+ properties:
+ function:
+ const: pcie
+ then:
+ properties:
+ groups:
+ enum: [pcie0_0_waken, pcie0_1_waken, pcie1_0_waken,
+ pcie0_0_clkreq, pcie0_1_clkreq, pcie1_0_clkreq,
+ pcie0_pad_perst, pcie1_pad_perst, pcie_pereset,
+ pcie_wake, pcie_clkreq]
+ - if:
+ properties:
+ function:
+ const: pmic
+ then:
+ properties:
+ groups:
+ enum: [pmic_bus]
+ - if:
+ properties:
+ function:
+ const: pwm
+ then:
+ properties:
+ groups:
+ enum: [pwm_ch1_0, pwm_ch1_1, pwm_ch1_2, pwm_ch2_0, pwm_ch2_1,
+ pwm_ch2_2, pwm_ch3_0, pwm_ch3_1, pwm_ch3_2, pwm_ch4_0,
+ pwm_ch4_1, pwm_ch4_2, pwm_ch4_3, pwm_ch5_0, pwm_ch5_1,
+ pwm_ch5_2, pwm_ch6_0, pwm_ch6_1, pwm_ch6_2, pwm_ch6_3,
+ pwm_ch7_0, pwm_0, pwm_1]
+ - if:
+ properties:
+ function:
+ const: sd
+ then:
+ properties:
+ groups:
+ enum: [sd_0, sd_1]
+ - if:
+ properties:
+ function:
+ const: spi
+ then:
+ properties:
+ groups:
+ enum: [spic0_0, spic0_1, spic1_0, spic1_1, spic2_0_wp_hold,
+ spic2_0, spi_0, spi_1, spi_wp, spi_hold]
+ - if:
+ properties:
+ function:
+ const: tdm
+ then:
+ properties:
+ groups:
+ enum: [tdm_0_out_mclk_bclk_ws, tdm_0_in_mclk_bclk_ws,
+ tdm_0_out_data, tdm_0_in_data, tdm_1_out_mclk_bclk_ws,
+ tdm_1_in_mclk_bclk_ws, tdm_1_out_data, tdm_1_in_data]
+ - if:
+ properties:
+ function:
+ const: uart
+ then:
+ properties:
+ groups:
+ enum: [uart0_0_tx_rx, uart1_0_tx_rx, uart1_0_rts_cts,
+ uart1_1_tx_rx, uart1_1_rts_cts, uart2_0_tx_rx,
+ uart2_0_rts_cts, uart2_1_tx_rx, uart2_1_rts_cts,
+ uart2_2_tx_rx, uart2_2_rts_cts, uart2_3_tx_rx,
+ uart3_0_tx_rx, uart3_1_tx_rx, uart3_1_rts_cts,
+ uart4_0_tx_rx, uart4_1_tx_rx, uart4_1_rts_cts,
+ uart4_2_tx_rx, uart4_2_rts_cts, uart0_txd_rxd,
+ uart1_0_txd_rxd, uart1_0_cts_rts, uart1_1_txd_rxd,
+ uart1_1_cts_rts, uart2_0_txd_rxd, uart2_0_cts_rts,
+ uart2_1_txd_rxd, uart2_1_cts_rts]
+ - if:
+ properties:
+ function:
+ const: watchdog
+ then:
+ properties:
+ groups:
+ enum: [watchdog]
+ - if:
+ properties:
+ function:
+ const: wifi
+ then:
+ properties:
+ groups:
+ enum: [wf0_2g, wf0_5g]
+
+ '^conf(-|$)':
+ type: object
+ additionalProperties: false
+ description:
+ pinconf configuration nodes.
+ $ref: /schemas/pinctrl/pincfg-node.yaml
+
+ properties:
+ groups:
+ description:
+ An array of strings. Each string contains the name of a group.
+ Valid values are the same as the pinmux node.
+
+ pins:
+ description:
+ An array of strings. Each string contains the name of a pin.
+ enum: [GPIO_A, I2S1_IN, I2S1_OUT, I2S_BCLK, I2S_WS, I2S_MCLK, TXD0,
+ RXD0, SPI_WP, SPI_HOLD, SPI_CLK, SPI_MOSI, SPI_MISO, SPI_CS,
+ I2C_SDA, I2C_SCL, I2S2_IN, I2S3_IN, I2S4_IN, I2S2_OUT,
+ I2S3_OUT, I2S4_OUT, GPIO_B, MDC, MDIO, G2_TXD0, G2_TXD1,
+ G2_TXD2, G2_TXD3, G2_TXEN, G2_TXC, G2_RXD0, G2_RXD1, G2_RXD2,
+ G2_RXD3, G2_RXDV, G2_RXC, NCEB, NWEB, NREB, NDL4, NDL5, NDL6,
+ NDL7, NRB, NCLE, NALE, NDL0, NDL1, NDL2, NDL3, MDI_TP_P0,
+ MDI_TN_P0, MDI_RP_P0, MDI_RN_P0, MDI_TP_P1, MDI_TN_P1,
+ MDI_RP_P1, MDI_RN_P1, MDI_RP_P2, MDI_RN_P2, MDI_TP_P2,
+ MDI_TN_P2, MDI_TP_P3, MDI_TN_P3, MDI_RP_P3, MDI_RN_P3,
+ MDI_RP_P4, MDI_RN_P4, MDI_TP_P4, MDI_TN_P4, PMIC_SCL,
+ PMIC_SDA, SPIC1_CLK, SPIC1_MOSI, SPIC1_MISO, SPIC1_CS,
+ GPIO_D, WATCHDOG, RTS3_N, CTS3_N, TXD3, RXD3, PERST0_N,
+ PERST1_N, WLED_N, EPHY_LED0_N, AUXIN0, AUXIN1, AUXIN2,
+ AUXIN3, TXD4, RXD4, RTS4_N, CST4_N, PWM1, PWM2, PWM3, PWM4,
+ PWM5, PWM6, PWM7, GPIO_E, TOP_5G_CLK, TOP_5G_DATA,
+ WF0_5G_HB0, WF0_5G_HB1, WF0_5G_HB2, WF0_5G_HB3, WF0_5G_HB4,
+ WF0_5G_HB5, WF0_5G_HB6, XO_REQ, TOP_RST_N, SYS_WATCHDOG,
+ EPHY_LED0_N_JTDO, EPHY_LED1_N_JTDI, EPHY_LED2_N_JTMS,
+ EPHY_LED3_N_JTCLK, EPHY_LED4_N_JTRST_N, WF2G_LED_N,
+ WF5G_LED_N, GPIO_9, GPIO_10, GPIO_11, GPIO_12, UART1_TXD,
+ UART1_RXD, UART1_CTS, UART1_RTS, UART2_TXD, UART2_RXD,
+ UART2_CTS, UART2_RTS, SMI_MDC, SMI_MDIO, PCIE_PERESET_N,
+ PWM_0, GPIO_0, GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5,
+ GPIO_6, GPIO_7, GPIO_8, UART0_TXD, UART0_RXD, TOP_2G_CLK,
+ TOP_2G_DATA, WF0_2G_HB0, WF0_2G_HB1, WF0_2G_HB2, WF0_2G_HB3,
+ WF0_2G_HB4, WF0_2G_HB5, WF0_2G_HB6]
+
+ bias-disable: true
+
+ bias-pull-up: true
+
+ bias-pull-down: true
+
+ input-enable: true
+
+ input-disable: true
+
+ output-enable: true
+
+ output-low: true
+
+ output-high: true
+
+ input-schmitt-enable: true
+
+ input-schmitt-disable: true
+
+ drive-strength:
+ enum: [4, 8, 12, 16]
+
+ slew-rate:
+ enum: [0, 1]
+
+ mediatek,tdsel:
+ description:
+ An integer describing the steps for output level shifter duty
+ cycle when asserted (high pulse width adjustment). Valid arguments
+ are from 0 to 15.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ mediatek,rdsel:
+ description:
+ An integer describing the steps for input level shifter duty cycle
+ when asserted (high pulse width adjustment). Valid arguments are
+ from 0 to 63.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ required:
+ - pins
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pio: pinctrl@10211000 {
+ compatible = "mediatek,mt7622-pinctrl";
+ reg = <0 0x10211000 0 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ pinctrl_eth_default: eth-pins {
+ mux-mdio {
+ groups = "mdc_mdio";
+ function = "eth";
+ drive-strength = <12>;
+ };
+
+ mux-gmac2 {
+ groups = "rgmii_via_gmac2";
+ function = "eth";
+ drive-strength = <12>;
+ };
+
+ mux-esw {
+ groups = "esw";
+ function = "eth";
+ drive-strength = <8>;
+ };
+
+ conf-mdio {
+ pins = "MDC";
+ bias-pull-up;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt76x8-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt76x8-pinctrl.yaml
new file mode 100644
index 0000000000..31849dd594
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt76x8-pinctrl.yaml
@@ -0,0 +1,450 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt76x8-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT76X8 Pin Controller
+
+maintainers:
+ - Arınç ÜNAL <arinc.unal@arinc9.com>
+ - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |
+ MediaTek MT76X8 pin controller for MT7628 and MT7688 SoCs.
+ The pin controller can only set the muxing of pin groups. Muxing individual
+ pins is not supported. There is no pinconf support.
+
+properties:
+ compatible:
+ const: ralink,mt76x8-pinctrl
+
+patternProperties:
+ '-pins$':
+ type: object
+ additionalProperties: false
+
+ patternProperties:
+ '^(.*-)?pinmux$':
+ type: object
+ description: node for pinctrl.
+ $ref: pinmux-node.yaml#
+ additionalProperties: false
+
+ properties:
+ function:
+ description:
+ A string containing the name of the function to mux to the group.
+ enum: [antenna, debug, gpio, i2c, i2s, jtag, p0led_an, p0led_kn,
+ p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an, p3led_kn,
+ p4led_an, p4led_kn, pcie, pcm, perst, pwm, pwm0, pwm1,
+ pwm_uart2, refclk, rsvd, sdxc, sdxc d5 d4, sdxc d6, sdxc d7,
+ spi, spi cs1, spis, sw_r, uart0, uart1, uart2, utif, wdt,
+ wled_an, wled_kn, -]
+
+ groups:
+ description:
+ An array of strings. Each string contains the name of a group.
+ maxItems: 1
+
+ required:
+ - groups
+ - function
+
+ allOf:
+ - if:
+ properties:
+ function:
+ const: antenna
+ then:
+ properties:
+ groups:
+ enum: [i2s]
+
+ - if:
+ properties:
+ function:
+ const: debug
+ then:
+ properties:
+ groups:
+ enum: [i2c]
+
+ - if:
+ properties:
+ function:
+ const: gpio
+ then:
+ properties:
+ groups:
+ enum: [gpio, i2c, i2s, p0led_an, p0led_kn, p1led_an, p1led_kn,
+ p2led_an, p2led_kn, p3led_an, p3led_kn, p4led_an,
+ p4led_kn, perst, pwm0, pwm1, refclk, sdmode, spi,
+ spi cs1, spis, uart0, uart1, uart2, wdt, wled_an,
+ wled_kn]
+
+ - if:
+ properties:
+ function:
+ const: i2c
+ then:
+ properties:
+ groups:
+ enum: [i2c]
+
+ - if:
+ properties:
+ function:
+ const: i2s
+ then:
+ properties:
+ groups:
+ enum: [i2s]
+
+ - if:
+ properties:
+ function:
+ const: jtag
+ then:
+ properties:
+ groups:
+ enum: [p0led_an, p0led_kn, p1led_an, p1led_kn, p2led_an,
+ p2led_kn, p3led_an, p3led_kn, p4led_an, p4led_kn,
+ sdmode]
+
+ - if:
+ properties:
+ function:
+ const: p0led_an
+ then:
+ properties:
+ groups:
+ enum: [p0led_an]
+
+ - if:
+ properties:
+ function:
+ const: p0led_kn
+ then:
+ properties:
+ groups:
+ enum: [p0led_kn]
+
+ - if:
+ properties:
+ function:
+ const: p1led_an
+ then:
+ properties:
+ groups:
+ enum: [p1led_an]
+
+ - if:
+ properties:
+ function:
+ const: p1led_kn
+ then:
+ properties:
+ groups:
+ enum: [p1led_kn]
+
+ - if:
+ properties:
+ function:
+ const: p2led_an
+ then:
+ properties:
+ groups:
+ enum: [p2led_an]
+
+ - if:
+ properties:
+ function:
+ const: p2led_kn
+ then:
+ properties:
+ groups:
+ enum: [p2led_kn]
+
+ - if:
+ properties:
+ function:
+ const: p3led_an
+ then:
+ properties:
+ groups:
+ enum: [p3led_an]
+
+ - if:
+ properties:
+ function:
+ const: p3led_kn
+ then:
+ properties:
+ groups:
+ enum: [p3led_kn]
+
+ - if:
+ properties:
+ function:
+ const: p4led_an
+ then:
+ properties:
+ groups:
+ enum: [p4led_an]
+
+ - if:
+ properties:
+ function:
+ const: p4led_kn
+ then:
+ properties:
+ groups:
+ enum: [p4led_kn]
+
+ - if:
+ properties:
+ function:
+ const: pcie
+ then:
+ properties:
+ groups:
+ enum: [gpio]
+
+ - if:
+ properties:
+ function:
+ const: pcm
+ then:
+ properties:
+ groups:
+ enum: [i2s]
+
+ - if:
+ properties:
+ function:
+ const: perst
+ then:
+ properties:
+ groups:
+ enum: [perst]
+
+ - if:
+ properties:
+ function:
+ const: pwm
+ then:
+ properties:
+ groups:
+ enum: [uart1, uart2]
+
+ - if:
+ properties:
+ function:
+ const: pwm0
+ then:
+ properties:
+ groups:
+ enum: [pwm0]
+
+ - if:
+ properties:
+ function:
+ const: pwm1
+ then:
+ properties:
+ groups:
+ enum: [pwm1]
+
+ - if:
+ properties:
+ function:
+ const: pwm_uart2
+ then:
+ properties:
+ groups:
+ enum: [spis]
+
+ - if:
+ properties:
+ function:
+ const: refclk
+ then:
+ properties:
+ groups:
+ enum: [gpio, refclk, spi cs1]
+
+ - if:
+ properties:
+ function:
+ const: rsvd
+ then:
+ properties:
+ groups:
+ enum: [p0led_an, p0led_kn, wled_an, wled_kn]
+
+ - if:
+ properties:
+ function:
+ const: sdxc
+ then:
+ properties:
+ groups:
+ enum: [sdmode]
+
+ - if:
+ properties:
+ function:
+ const: sdxc d5 d4
+ then:
+ properties:
+ groups:
+ enum: [uart2]
+
+ - if:
+ properties:
+ function:
+ const: sdxc d6
+ then:
+ properties:
+ groups:
+ enum: [pwm1]
+
+ - if:
+ properties:
+ function:
+ const: sdxc d7
+ then:
+ properties:
+ groups:
+ enum: [pwm0]
+
+ - if:
+ properties:
+ function:
+ const: spi
+ then:
+ properties:
+ groups:
+ enum: [spi]
+
+ - if:
+ properties:
+ function:
+ const: spi cs1
+ then:
+ properties:
+ groups:
+ enum: [spi cs1]
+
+ - if:
+ properties:
+ function:
+ const: spis
+ then:
+ properties:
+ groups:
+ enum: [spis]
+
+ - if:
+ properties:
+ function:
+ const: sw_r
+ then:
+ properties:
+ groups:
+ enum: [uart1]
+
+ - if:
+ properties:
+ function:
+ const: uart0
+ then:
+ properties:
+ groups:
+ enum: [uart0]
+
+ - if:
+ properties:
+ function:
+ const: uart1
+ then:
+ properties:
+ groups:
+ enum: [uart1]
+
+ - if:
+ properties:
+ function:
+ const: uart2
+ then:
+ properties:
+ groups:
+ enum: [uart2]
+
+ - if:
+ properties:
+ function:
+ const: utif
+ then:
+ properties:
+ groups:
+ enum: [p1led_an, p1led_kn, p2led_an, p2led_kn, p3led_an,
+ p3led_kn, p4led_an, p4led_kn, pwm0, pwm1, sdmode, spis]
+
+ - if:
+ properties:
+ function:
+ const: wdt
+ then:
+ properties:
+ groups:
+ enum: [wdt]
+
+ - if:
+ properties:
+ function:
+ const: wled_an
+ then:
+ properties:
+ groups:
+ enum: [wled_an]
+
+ - if:
+ properties:
+ function:
+ const: wled_kn
+ then:
+ properties:
+ groups:
+ enum: [wled_kn]
+
+ - if:
+ properties:
+ function:
+ const: "-"
+ then:
+ properties:
+ groups:
+ enum: [i2c, spi cs1, uart0]
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ pinctrl {
+ compatible = "ralink,mt76x8-pinctrl";
+
+ i2c_pins: i2c0-pins {
+ pinmux {
+ groups = "i2c";
+ function = "i2c";
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7981-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7981-pinctrl.yaml
new file mode 100644
index 0000000000..74d52a741f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7981-pinctrl.yaml
@@ -0,0 +1,480 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt7981-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7981 Pin Controller
+
+maintainers:
+ - Daniel Golle <daniel@makrotopia.org>
+
+description:
+ The MediaTek's MT7981 Pin controller is used to control SoC pins.
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt7981-pinctrl
+
+ reg:
+ minItems: 9
+ maxItems: 9
+
+ reg-names:
+ items:
+ - const: gpio
+ - const: iocfg_rt
+ - const: iocfg_rm
+ - const: iocfg_rb
+ - const: iocfg_lb
+ - const: iocfg_bl
+ - const: iocfg_tm
+ - const: iocfg_tl
+ - const: eint
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+ description:
+ Number of cells in GPIO specifier. Since the generic GPIO binding is used,
+ the amount of cells must be specified as 2. See the below mentioned gpio
+ binding representation for description of particular cells.
+
+ gpio-ranges:
+ minItems: 1
+ maxItems: 5
+ description: GPIO valid number range.
+
+ interrupt-controller: true
+
+ interrupts:
+ maxItems: 1
+
+ "#interrupt-cells":
+ const: 2
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - gpio-controller
+ - "#gpio-cells"
+
+patternProperties:
+ '-pins$':
+ type: object
+ additionalProperties: false
+
+ patternProperties:
+ '^.*mux.*$':
+ type: object
+ additionalProperties: false
+ description: |
+ pinmux configuration nodes.
+
+ The following table shows the effective values of "group", "function"
+ properties and chip pinout pins
+
+ groups function pins (in pin#)
+ ---------------------------------------------------------------------
+ "wa_aice1" "wa_aice" 0, 1
+ "wa_aice2" "wa_aice" 0, 1
+ "wm_uart_0" "uart" 0, 1
+ "dfd" "dfd" 0, 1, 4, 5
+ "watchdog" "watchdog" 2
+ "pcie_pereset" "pcie" 3
+ "jtag" "jtag" 4, 5, 6, 7, 8
+ "wm_jtag_0" "jtag" 4, 5, 6, 7, 8
+ "wo0_jtag_0" "jtag" 9, 10, 11, 12, 13
+ "uart2_0" "uart" 4, 5, 6, 7
+ "gbe_led0" "led" 8
+ "pta_ext_0" "pta" 4, 5, 6
+ "pwm2" "pwm" 7
+ "net_wo0_uart_txd_0" "uart" 8
+ "spi1_0" "spi" 4, 5, 6, 7
+ "i2c0_0" "i2c" 6, 7
+ "dfd_ntrst" "dfd" 8
+ "wm_aice1" "wa_aice" 9, 10
+ "pwm0_0" "pwm" 13
+ "pwm0_1" "pwm" 15
+ "pwm1_0" "pwm" 14
+ "pwm1_1" "pwm" 15
+ "net_wo0_uart_txd_1" "uart" 14
+ "net_wo0_uart_txd_2" "uart" 15
+ "gbe_led1" "led" 13
+ "pcm" "pcm" 9, 10, 11, 12, 13, 25
+ "watchdog1" "watchdog" 13
+ "udi" "udi" 9, 10, 11, 12, 13
+ "drv_vbus" "usb" 14
+ "emmc_45" "flash" 15, 16, 17, 18, 19, 20, 21, 22, 23,
+ 24, 25
+
+ "snfi" "flash" 16, 17, 18, 19, 20, 21
+ "spi0" "spi" 16, 17, 18, 19
+ "spi0_wp_hold" "spi" 20, 21
+ "spi1_1" "spi" 22, 23, 24, 25
+ "spi2" "spi" 26, 27, 28, 29
+ "spi2_wp_hold" "spi" 30, 31
+ "uart1_0" "uart" 16, 17, 18, 19
+ "uart1_1" "uart" 26, 27, 28, 29
+ "uart2_1" "uart" 22, 23, 24, 25
+ "pta_ext_1" "pta" 22, 23, 24
+ "wm_aurt_1" "uart" 20, 21
+ "wm_aurt_2" "uart" 30, 31
+ "wm_jtag_1" "jtag" 20, 21, 22, 23, 24
+ "wo0_jtag_1" "jtag" 25, 26, 27, 28, 29
+ "wa_aice3" "wa_aice" 28, 20
+ "wm_aice2" "wa_aice" 30, 31
+ "i2c0_1" "i2c" 30, 31
+ "u2_phy_i2c" "i2c" 30, 31
+ "uart0" "uart" 32, 33
+ "sgmii1_phy_i2c" "i2c" 32, 33
+ "u3_phy_i2c" "i2c" 32, 33
+ "sgmii0_phy_i2c" "i2c" 32, 33
+ "pcie_clk" "pcie" 34
+ "pcie_wake" "pcie" 35
+ "i2c0_2" "i2c" 36, 37
+ "smi_mdc_mdio" "eth" 36, 37
+ "gbe_ext_mdc_mdio" "eth" 36, 37
+ "wf0_mode1" "eth" 40, 41, 42, 43, 44, 45, 46, 47, 48,
+ 49, 50, 51, 52, 53, 54, 55, 56
+
+ "wf0_mode3" "eth" 45, 46, 47, 48, 49, 51
+ "wf2g_led0" "led" 30
+ "wf2g_led1" "led" 34
+ "wf5g_led0" "led" 31
+ "wf5g_led1" "led" 35
+ "mt7531_int" "eth" 38
+ "ant_sel" "ant" 14, 15, 16, 17, 18, 19, 20, 21, 22,
+ 23, 24, 25, 34, 35
+
+ $ref: /schemas/pinctrl/pinmux-node.yaml
+ properties:
+ function:
+ description:
+ A string containing the name of the function to mux to the group.
+ enum: [wa_aice, dfd, jtag, pta, pcm, udi, usb, ant, eth, i2c, led,
+ pwm, spi, uart, watchdog, flash, pcie]
+ groups:
+ description:
+ An array of strings. Each string contains the name of a group.
+
+ required:
+ - function
+ - groups
+
+ allOf:
+ - if:
+ properties:
+ function:
+ const: wa_aice
+ then:
+ properties:
+ groups:
+ enum: [wa_aice1, wa_aice2, wm_aice1_1, wa_aice3, wm_aice1_2]
+ - if:
+ properties:
+ function:
+ const: dfd
+ then:
+ properties:
+ groups:
+ enum: [dfd, dfd_ntrst]
+ - if:
+ properties:
+ function:
+ const: jtag
+ then:
+ properties:
+ groups:
+ enum: [jtag, wm_jtag_0, wo0_jtag_0, wo0_jtag_1, wm_jtag_1]
+ - if:
+ properties:
+ function:
+ const: pta
+ then:
+ properties:
+ groups:
+ enum: [pta_ext_0, pta_ext_1]
+ - if:
+ properties:
+ function:
+ const: pcm
+ then:
+ properties:
+ groups:
+ enum: [pcm]
+ - if:
+ properties:
+ function:
+ const: udi
+ then:
+ properties:
+ groups:
+ enum: [udi]
+ - if:
+ properties:
+ function:
+ const: usb
+ then:
+ properties:
+ groups:
+ enum: [drv_vbus]
+ - if:
+ properties:
+ function:
+ const: ant
+ then:
+ properties:
+ groups:
+ enum: [ant_sel]
+ - if:
+ properties:
+ function:
+ const: eth
+ then:
+ properties:
+ groups:
+ enum: [smi_mdc_mdio, gbe_ext_mdc_mdio, wf0_mode1, wf0_mode3,
+ mt7531_int]
+ - if:
+ properties:
+ function:
+ const: i2c
+ then:
+ properties:
+ groups:
+ enum: [i2c0_0, i2c0_1, u2_phy_i2c, sgmii1_phy_i2c, u3_phy_i2c,
+ sgmii0_phy_i2c, i2c0_2]
+ - if:
+ properties:
+ function:
+ const: led
+ then:
+ properties:
+ groups:
+ enum: [gbe_led0, gbe_led1, wf2g_led0, wf2g_led1, wf5g_led0,
+ wf5g_led1]
+ - if:
+ properties:
+ function:
+ const: pwm
+ then:
+ properties:
+ groups:
+ items:
+ enum: [pwm2, pwm0_0, pwm0_1, pwm1_0, pwm1_1]
+ maxItems: 3
+ - if:
+ properties:
+ function:
+ const: spi
+ then:
+ properties:
+ groups:
+ items:
+ enum: [spi1_0, spi0, spi0_wp_hold, spi1_1, spi2,
+ spi2_wp_hold]
+ maxItems: 4
+ - if:
+ properties:
+ function:
+ const: uart
+ then:
+ properties:
+ groups:
+ items:
+ enum: [wm_uart_0, uart2_0, net_wo0_uart_txd_0,
+ net_wo0_uart_txd_1, net_wo0_uart_txd_2, uart1_0,
+ uart1_1, uart2_1, wm_aurt_1, wm_aurt_2, uart0]
+ - if:
+ properties:
+ function:
+ const: watchdog
+ then:
+ properties:
+ groups:
+ enum: [watchdog]
+ - if:
+ properties:
+ function:
+ const: flash
+ then:
+ properties:
+ groups:
+ items:
+ enum: [emmc_45, snfi]
+ maxItems: 1
+ - if:
+ properties:
+ function:
+ const: pcie
+ then:
+ properties:
+ groups:
+ items:
+ enum: [pcie_clk, pcie_wake, pcie_pereset]
+ maxItems: 3
+
+ '^.*conf.*$':
+ type: object
+ additionalProperties: false
+ description: pinconf configuration nodes.
+ $ref: /schemas/pinctrl/pincfg-node.yaml
+
+ properties:
+ pins:
+ description:
+ An array of strings. Each string contains the name of a pin.
+ items:
+ enum: [GPIO_WPS, GPIO_RESET, SYS_WATCHDOG, PCIE_PERESET_N,
+ JTAG_JTDO, JTAG_JTDI, JTAG_JTMS, JTAG_JTCLK, JTAG_JTRST_N,
+ WO_JTAG_JTDO, WO_JTAG_JTDI, WO_JTAG_JTMS, WO_JTAG_JTCLK,
+ WO_JTAG_JTRST_N, USB_VBUS, PWM0, SPI0_CLK, SPI0_MOSI,
+ SPI0_MISO, SPI0_CS, SPI0_HOLD, SPI0_WP, SPI1_CLK,
+ SPI1_MOSI, SPI1_MISO, SPI1_CS, SPI2_CLK, SPI2_MOSI,
+ SPI2_MISO, SPI2_CS, SPI2_HOLD, SPI2_WP, UART0_RXD,
+ UART0_TXD, PCIE_CLK_REQ, PCIE_WAKE_N, SMI_MDC, SMI_MDIO,
+ GBE_INT, GBE_RESET, WF_DIG_RESETB, WF_CBA_RESETB,
+ WF_XO_REQ, WF_TOP_CLK, WF_TOP_DATA, WF_HB1, WF_HB2, WF_HB3,
+ WF_HB4, WF_HB0, WF_HB0_B, WF_HB5, WF_HB6, WF_HB7, WF_HB8,
+ WF_HB9, WF_HB10]
+ maxItems: 57
+
+ bias-disable: true
+
+ bias-pull-up:
+ oneOf:
+ - type: boolean
+ description: normal pull up.
+ - enum: [100, 101, 102, 103]
+ description:
+ PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0 defines in
+ dt-bindings/pinctrl/mt65xx.h.
+
+ bias-pull-down:
+ oneOf:
+ - type: boolean
+ description: normal pull down.
+ - enum: [100, 101, 102, 103]
+ description:
+ PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0 defines in
+ dt-bindings/pinctrl/mt65xx.h.
+
+ input-enable: true
+
+ input-disable: true
+
+ output-enable: true
+
+ output-low: true
+
+ output-high: true
+
+ input-schmitt-enable: true
+
+ input-schmitt-disable: true
+
+ drive-strength:
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+ mediatek,pull-up-adv:
+ description: |
+ Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3'
+ Pull up settings for 2 pull resistors, R0 and R1. Valid arguments
+ are described as below:
+ 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+ 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+ 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+ 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+
+ mediatek,pull-down-adv:
+ description: |
+ Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3'
+ Pull down settings for 2 pull resistors, R0 and R1. Valid arguments
+ are described as below:
+ 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+ 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+ 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+ 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+
+ required:
+ - pins
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/pinctrl/mt65xx.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ pio: pinctrl@11d00000 {
+ compatible = "mediatek,mt7981-pinctrl";
+ reg = <0 0x11d00000 0 0x1000>,
+ <0 0x11c00000 0 0x1000>,
+ <0 0x11c10000 0 0x1000>,
+ <0 0x11d20000 0 0x1000>,
+ <0 0x11e00000 0 0x1000>,
+ <0 0x11e20000 0 0x1000>,
+ <0 0x11f00000 0 0x1000>,
+ <0 0x11f10000 0 0x1000>,
+ <0 0x1000b000 0 0x1000>;
+ reg-names = "gpio", "iocfg_rt", "iocfg_rm",
+ "iocfg_rb", "iocfg_lb", "iocfg_bl",
+ "iocfg_tm", "iocfg_tl", "eint";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pio 0 0 56>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ #interrupt-cells = <2>;
+
+ mdio_pins: mdio-pins {
+ mux {
+ function = "eth";
+ groups = "smi_mdc_mdio";
+ };
+ };
+
+ spi0_flash_pins: spi0-pins {
+ mux {
+ function = "spi";
+ groups = "spi0", "spi0_wp_hold";
+ };
+
+ conf-pu {
+ pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
+ };
+
+ conf-pd {
+ pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
+ };
+ };
+
+ pcie_pins: pcie-pins {
+ mux {
+ function = "pcie";
+ groups = "pcie_clk", "pcie_wake", "pcie_pereset";
+ };
+ };
+
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
new file mode 100644
index 0000000000..5ad65135fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
@@ -0,0 +1,462 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt7986-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT7986 Pin Controller
+
+maintainers:
+ - Sean Wang <sean.wang@kernel.org>
+
+description:
+ The MediaTek's MT7986 Pin controller is used to control SoC pins.
+
+properties:
+ compatible:
+ enum:
+ - mediatek,mt7986a-pinctrl
+ - mediatek,mt7986b-pinctrl
+
+ reg:
+ minItems: 8
+ maxItems: 8
+
+ reg-names:
+ items:
+ - const: gpio
+ - const: iocfg_rt
+ - const: iocfg_rb
+ - const: iocfg_lt
+ - const: iocfg_lb
+ - const: iocfg_tr
+ - const: iocfg_tl
+ - const: eint
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+ description:
+ Number of cells in GPIO specifier. Since the generic GPIO binding is used,
+ the amount of cells must be specified as 2. See the below mentioned gpio
+ binding representation for description of particular cells.
+
+ gpio-ranges:
+ minItems: 1
+ maxItems: 5
+ description:
+ GPIO valid number range.
+
+ interrupt-controller: true
+
+ interrupts:
+ maxItems: 1
+
+ "#interrupt-cells":
+ const: 2
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - gpio-controller
+ - "#gpio-cells"
+
+patternProperties:
+ '-pins$':
+ type: object
+ additionalProperties: false
+
+ patternProperties:
+ '^.*mux.*$':
+ type: object
+ additionalProperties: false
+ description: |
+ pinmux configuration nodes.
+
+ The following table shows the effective values of "group", "function"
+ properties and chip pinout pins
+
+ groups function pins (in pin#)
+ ---------------------------------------------------------------------
+ "watchdog" "watchdog" 0
+ "wifi_led" "led" 1, 2
+ "i2c" "i2c" 3, 4
+ "uart1_0" "uart" 7, 8, 9, 10
+ "uart1_rx_tx" "uart" 42, 43
+ "uart1_cts_rts" "uart" 44, 45
+ "pcie_clk" "pcie" 9
+ "pcie_wake" "pcie" 10
+ "spi1_0" "spi" 11, 12, 13, 14
+ "pwm1_1" "pwm" 20,
+ "pwm0" "pwm" 21,
+ "pwm1_0" "pwm" 22,
+ "snfi" "flash" 23, 24, 25, 26, 27, 28
+ "spi1_2" "spi" 29, 30, 31, 32
+ "emmc_45" "emmc" 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+ 32
+
+ "spi1_1" "spi" 23, 24, 25, 26
+ "uart1_2_rx_tx" "uart" 29, 30
+ "uart1_2_cts_rts" "uart" 31, 32
+ "uart1_1" "uart" 23, 24, 25, 26
+ "uart2_0_rx_tx" "uart" 29, 30
+ "uart2_0_cts_rts" "uart" 31, 32
+ "spi0" "spi" 33, 34, 35, 36
+ "spi0_wp_hold" "spi" 37, 38
+ "uart1_3_rx_tx" "uart" 35, 36
+ "uart1_3_cts_rts" "uart" 37, 38
+ "uart2_1" "uart" 33, 34, 35, 36
+ "spi1_3" "spi" 33, 34, 35, 36
+ "uart0" "uart" 39, 40
+ "pcie_pereset" "pcie" 41
+ "uart1" "uart" 42, 43, 44, 45
+ "uart2" "uart" 46, 47, 48, 49
+ "emmc_51" "emmc" 50, 51, 52, 53, 54, 55, 56, 57, 58, 59,
+ 60, 61
+
+ "pcm" "audio" 62, 63, 64, 65
+ "i2s" "audio" 62, 63, 64, 65
+ "switch_int" "eth" 66
+ "mdc_mdio" "eth" 67
+ "wf_2g" "wifi" 74, 75, 76, 77, 78, 79, 80, 81, 82, 83
+ "wf_5g" "wifi" 91, 92, 93, 94, 95, 96, 97, 98, 99, 100
+ "wf_dbdc" "wifi" 74, 75, 76, 77, 78, 79, 80, 81, 82, 83,
+ 84, 85
+
+ $ref: /schemas/pinctrl/pinmux-node.yaml
+ properties:
+ function:
+ description:
+ A string containing the name of the function to mux to the group.
+ There is no "audio", "pcie" functions on mt7986b, you can only use
+ those functions on mt7986a.
+ enum: [audio, emmc, eth, i2c, led, flash, pcie, pwm, spi, uart,
+ watchdog, wifi]
+ groups:
+ description:
+ An array of strings. Each string contains the name of a group.
+ There is no "pcie_pereset", "uart1", "uart2" "emmc_51", "pcm", and
+ "i2s" groups on mt7986b, you can only use those groups on mt7986a.
+ required:
+ - function
+ - groups
+
+ allOf:
+ - if:
+ properties:
+ function:
+ const: audio
+ then:
+ properties:
+ groups:
+ enum: [pcm, i2s]
+ - if:
+ properties:
+ function:
+ const: emmc
+ then:
+ properties:
+ groups:
+ enum: [emmc_45, emmc_51]
+ - if:
+ properties:
+ function:
+ const: eth
+ then:
+ properties:
+ groups:
+ enum: [switch_int, mdc_mdio]
+ - if:
+ properties:
+ function:
+ const: i2c
+ then:
+ properties:
+ groups:
+ enum: [i2c]
+ - if:
+ properties:
+ function:
+ const: led
+ then:
+ properties:
+ groups:
+ enum: [wifi_led]
+ - if:
+ properties:
+ function:
+ const: flash
+ then:
+ properties:
+ groups:
+ enum: [snfi]
+ - if:
+ properties:
+ function:
+ const: pcie
+ then:
+ properties:
+ groups:
+ items:
+ enum: [pcie_clk, pcie_wake, pcie_pereset]
+ maxItems: 3
+ - if:
+ properties:
+ function:
+ const: pwm
+ then:
+ properties:
+ groups:
+ items:
+ enum: [pwm0, pwm1_0, pwm1_1]
+ maxItems: 2
+ - if:
+ properties:
+ function:
+ const: spi
+ then:
+ properties:
+ groups:
+ items:
+ enum: [spi0, spi0_wp_hold, spi1_0, spi1_1, spi1_2, spi1_3]
+ maxItems: 2
+ - if:
+ properties:
+ function:
+ const: uart
+ then:
+ properties:
+ groups:
+ items:
+ enum: [uart1_0, uart1_rx_tx, uart1_cts_rts, uart1_1,
+ uart1_2_rx_tx, uart1_2_cts_rts, uart1_3_rx_tx,
+ uart1_3_cts_rts, uart2_0_rx_tx, uart2_0_cts_rts,
+ uart2_1, uart0, uart1, uart2]
+ maxItems: 2
+ - if:
+ properties:
+ function:
+ const: watchdog
+ then:
+ properties:
+ groups:
+ enum: [watchdog]
+ - if:
+ properties:
+ function:
+ const: wifi
+ then:
+ properties:
+ groups:
+ items:
+ enum: [wf_2g, wf_5g, wf_dbdc]
+ maxItems: 3
+ '^.*conf.*$':
+ type: object
+ additionalProperties: false
+ description:
+ pinconf configuration nodes.
+ $ref: /schemas/pinctrl/pincfg-node.yaml
+
+ properties:
+ pins:
+ description:
+ An array of strings. Each string contains the name of a pin. There
+ is no PIN 41 to PIN 65 above on mt7686b, you can only use those
+ pins on mt7986a.
+ items:
+ enum: [SYS_WATCHDOG, WF2G_LED, WF5G_LED, I2C_SCL, I2C_SDA, GPIO_0,
+ GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5, GPIO_6, GPIO_7,
+ GPIO_8, GPIO_9, GPIO_10, GPIO_11, GPIO_12, GPIO_13,
+ GPIO_14, GPIO_15, PWM0, PWM1, SPI0_CLK, SPI0_MOSI,
+ SPI0_MISO, SPI0_CS, SPI0_HOLD, SPI0_WP, SPI1_CLK,
+ SPI1_MOSI, SPI1_MISO, SPI1_CS, SPI2_CLK, SPI2_MOSI,
+ SPI2_MISO, SPI2_CS, SPI2_HOLD, SPI2_WP, UART0_RXD,
+ UART0_TXD, PCIE_PERESET_N, UART1_RXD, UART1_TXD, UART1_CTS,
+ UART1_RTS, UART2_RXD, UART2_TXD, UART2_CTS, UART2_RTS,
+ EMMC_DATA_0, EMMC_DATA_1, EMMC_DATA_2, EMMC_DATA_3,
+ EMMC_DATA_4, EMMC_DATA_5, EMMC_DATA_6, EMMC_DATA_7,
+ EMMC_CMD, EMMC_CK, EMMC_DSL, EMMC_RSTB, PCM_DTX, PCM_DRX,
+ PCM_CLK, PCM_FS, MT7531_INT, SMI_MDC, SMI_MDIO,
+ WF0_DIG_RESETB, WF0_CBA_RESETB, WF0_XO_REQ, WF0_TOP_CLK,
+ WF0_TOP_DATA, WF0_HB1, WF0_HB2, WF0_HB3, WF0_HB4, WF0_HB0,
+ WF0_HB0_B, WF0_HB5, WF0_HB6, WF0_HB7, WF0_HB8, WF0_HB9,
+ WF0_HB10, WF1_DIG_RESETB, WF1_CBA_RESETB, WF1_XO_REQ,
+ WF1_TOP_CLK, WF1_TOP_DATA, WF1_HB1, WF1_HB2, WF1_HB3,
+ WF1_HB4, WF1_HB0, WF1_HB0_B, WF1_HB5, WF1_HB6, WF1_HB7,
+ WF1_HB8]
+ maxItems: 101
+
+ bias-disable: true
+
+ bias-pull-up:
+ oneOf:
+ - type: boolean
+ description: normal pull up.
+ - enum: [100, 101, 102, 103]
+ description:
+ PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0 defines in
+ dt-bindings/pinctrl/mt65xx.h.
+
+ bias-pull-down:
+ oneOf:
+ - type: boolean
+ description: normal pull down.
+ - enum: [100, 101, 102, 103]
+ description:
+ PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0 defines in
+ dt-bindings/pinctrl/mt65xx.h.
+
+ input-enable: true
+
+ input-disable: true
+
+ output-enable: true
+
+ output-low: true
+
+ output-high: true
+
+ input-schmitt-enable: true
+
+ input-schmitt-disable: true
+
+ drive-strength:
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+ mediatek,pull-up-adv:
+ description: |
+ Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3'
+ Pull up settings for 2 pull resistors, R0 and R1. Valid arguments
+ are described as below:
+ 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+ 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+ 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+ 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+
+ mediatek,pull-down-adv:
+ description: |
+ Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3'
+ Pull down settings for 2 pull resistors, R0 and R1. Valid arguments
+ are described as below:
+ 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+ 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+ 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+ 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+
+ required:
+ - pins
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/pinctrl/mt65xx.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ pio: pinctrl@1001f000 {
+ compatible = "mediatek,mt7986a-pinctrl";
+ reg = <0 0x1001f000 0 0x1000>,
+ <0 0x11c30000 0 0x1000>,
+ <0 0x11c40000 0 0x1000>,
+ <0 0x11e20000 0 0x1000>,
+ <0 0x11e30000 0 0x1000>,
+ <0 0x11f00000 0 0x1000>,
+ <0 0x11f10000 0 0x1000>,
+ <0 0x1000b000 0 0x1000>;
+ reg-names = "gpio", "iocfg_rt", "iocfg_rb", "iocfg_lt",
+ "iocfg_lb", "iocfg_tr", "iocfg_tl", "eint";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pio 0 0 100>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ #interrupt-cells = <2>;
+
+ pcie_pins: pcie-pins {
+ mux {
+ function = "pcie";
+ groups = "pcie_clk", "pcie_wake", "pcie_pereset";
+ };
+ };
+
+ pwm_pins: pwm-pins {
+ mux {
+ function = "pwm";
+ groups = "pwm0", "pwm1_0";
+ };
+ };
+
+ spi0_pins: spi0-pins {
+ mux {
+ function = "spi";
+ groups = "spi0", "spi0_wp_hold";
+ };
+ };
+
+ uart1_pins: uart1-pins {
+ mux {
+ function = "uart";
+ groups = "uart1";
+ };
+ };
+
+ uart1_3_pins: uart1-3-pins {
+ mux {
+ function = "uart";
+ groups = "uart1_3_rx_tx", "uart1_3_cts_rts";
+ };
+ };
+
+ uart2_pins: uart2-pins {
+ mux {
+ function = "uart";
+ groups = "uart2";
+ };
+ };
+
+ mmc0_pins_default: mmc0-pins {
+ mux {
+ function = "emmc";
+ groups = "emmc_51";
+ };
+ conf-cmd-dat {
+ pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
+ "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
+ "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
+ input-enable;
+ drive-strength = <4>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+ };
+ conf-clk {
+ pins = "EMMC_CK";
+ drive-strength = <6>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+ };
+ conf-ds {
+ pins = "EMMC_DSL";
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
+ };
+ conf-rst {
+ pins = "EMMC_RSTB";
+ drive-strength = <4>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
+ };
+ };
+
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
new file mode 100644
index 0000000000..8507bd15f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
@@ -0,0 +1,237 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8183-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT8183 Pin Controller
+
+maintainers:
+ - Sean Wang <sean.wang@kernel.org>
+
+description:
+ The MediaTek's MT8183 Pin controller is used to control SoC pins.
+
+properties:
+ compatible:
+ const: mediatek,mt8183-pinctrl
+
+ reg:
+ minItems: 10
+ maxItems: 10
+
+ reg-names:
+ items:
+ - const: iocfg0
+ - const: iocfg1
+ - const: iocfg2
+ - const: iocfg3
+ - const: iocfg4
+ - const: iocfg5
+ - const: iocfg6
+ - const: iocfg7
+ - const: iocfg8
+ - const: eint
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+ description:
+ Number of cells in GPIO specifier. Since the generic GPIO binding is used,
+ the amount of cells must be specified as 2. See the below mentioned gpio
+ binding representation for description of particular cells.
+
+ gpio-ranges:
+ minItems: 1
+ maxItems: 5
+ description:
+ GPIO valid number range.
+
+ interrupt-controller: true
+
+ interrupts:
+ maxItems: 1
+
+ "#interrupt-cells":
+ const: 2
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - "#gpio-cells"
+ - gpio-ranges
+
+patternProperties:
+ '-pins(-[a-z]+)?$':
+ type: object
+ additionalProperties: false
+ patternProperties:
+ '^pins':
+ type: object
+ additionalProperties: false
+ description:
+ A pinctrl node should contain at least one subnodes representing the
+ pinctrl groups available on the machine. Each subnode will list the
+ pins it needs, and how they should be configured, with regard to muxer
+ configuration, pullups, drive strength, input enable/disable and input
+ schmitt.
+ $ref: /schemas/pinctrl/pincfg-node.yaml
+
+ properties:
+ pinmux:
+ description:
+ Integer array, represents gpio pin number and mux setting.
+ Supported pin number and mux varies for different SoCs, and are
+ defined as macros in <soc>-pinfunc.h directly.
+
+ bias-disable: true
+
+ bias-pull-up: true
+
+ bias-pull-down: true
+
+ input-enable: true
+
+ input-disable: true
+
+ output-low: true
+
+ output-high: true
+
+ input-schmitt-enable: true
+
+ input-schmitt-disable: true
+
+ drive-strength:
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+ drive-strength-microamp:
+ enum: [125, 250, 500, 1000]
+
+ mediatek,drive-strength-adv:
+ deprecated: true
+ description: |
+ DEPRECATED: Please use drive-strength-microamp instead.
+ Describe the specific driving setup property.
+ For I2C pins, the existing generic driving setup can only support
+ 2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they
+ can support 0.125/0.25/0.5/1mA adjustment. If we enable specific
+ driving setup, the existing generic setup will be disabled.
+ The specific driving setup is controlled by E1E0EN.
+ When E1=0/E0=0, the strength is 0.125mA.
+ When E1=0/E0=1, the strength is 0.25mA.
+ When E1=1/E0=0, the strength is 0.5mA.
+ When E1=1/E0=1, the strength is 1mA.
+ EN is used to enable or disable the specific driving setup.
+ Valid arguments are described as below:
+ 0: (E1, E0, EN) = (0, 0, 0)
+ 1: (E1, E0, EN) = (0, 0, 1)
+ 2: (E1, E0, EN) = (0, 1, 0)
+ 3: (E1, E0, EN) = (0, 1, 1)
+ 4: (E1, E0, EN) = (1, 0, 0)
+ 5: (E1, E0, EN) = (1, 0, 1)
+ 6: (E1, E0, EN) = (1, 1, 0)
+ 7: (E1, E0, EN) = (1, 1, 1)
+ So the valid arguments are from 0 to 7.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3, 4, 5, 6, 7]
+
+ mediatek,pull-up-adv:
+ description: |
+ Pull up settings for 2 pull resistors, R0 and R1. User can
+ configure those special pins. Valid arguments are described as
+ below:
+ 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+ 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+ 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+ 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+
+ mediatek,pull-down-adv:
+ description: |
+ Pull down settings for 2 pull resistors, R0 and R1. User can
+ configure those special pins. Valid arguments are described as
+ below:
+ 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+ 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+ 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+ 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+
+ mediatek,tdsel:
+ description:
+ An integer describing the steps for output level shifter duty
+ cycle when asserted (high pulse width adjustment). Valid arguments
+ are from 0 to 15.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ mediatek,rdsel:
+ description:
+ An integer describing the steps for input level shifter duty cycle
+ when asserted (high pulse width adjustment). Valid arguments are
+ from 0 to 63.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ required:
+ - pinmux
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/pinctrl/mt8183-pinfunc.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pio: pinctrl@10005000 {
+ compatible = "mediatek,mt8183-pinctrl";
+ reg = <0 0x10005000 0 0x1000>,
+ <0 0x11f20000 0 0x1000>,
+ <0 0x11e80000 0 0x1000>,
+ <0 0x11e70000 0 0x1000>,
+ <0 0x11e90000 0 0x1000>,
+ <0 0x11d30000 0 0x1000>,
+ <0 0x11d20000 0 0x1000>,
+ <0 0x11c50000 0 0x1000>,
+ <0 0x11f30000 0 0x1000>,
+ <0 0x1000b000 0 0x1000>;
+ reg-names = "iocfg0", "iocfg1", "iocfg2",
+ "iocfg3", "iocfg4", "iocfg5",
+ "iocfg6", "iocfg7", "iocfg8",
+ "eint";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pio 0 0 192>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+
+ i2c0_pins_a: i2c0-pins {
+ pins1 {
+ pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
+ <PINMUX_GPIO49__FUNC_SDA5>;
+ mediatek,pull-up-adv = <3>;
+ drive-strength-microamp = <1000>;
+ };
+ };
+
+ i2c1_pins_a: i2c1-pins {
+ pins {
+ pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
+ <PINMUX_GPIO51__FUNC_SDA3>;
+ mediatek,pull-down-adv = <2>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8186-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8186-pinctrl.yaml
new file mode 100644
index 0000000000..69136ddd0b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8186-pinctrl.yaml
@@ -0,0 +1,275 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8186-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT8186 Pin Controller
+
+maintainers:
+ - Sean Wang <sean.wang@mediatek.com>
+
+description:
+ The MediaTek's MT8186 Pin controller is used to control SoC pins.
+
+properties:
+ compatible:
+ const: mediatek,mt8186-pinctrl
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ description:
+ Number of cells in GPIO specifier. Since the generic GPIO binding is used,
+ the amount of cells must be specified as 2. See the below mentioned gpio
+ binding representation for description of particular cells.
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ gpio-line-names: true
+
+ reg:
+ description:
+ Physical address base for GPIO base registers. There are 8 different GPIO
+ physical address base in mt8186.
+ maxItems: 8
+
+ reg-names:
+ description:
+ GPIO base register names.
+ items:
+ - const: iocfg0
+ - const: iocfg_lt
+ - const: iocfg_lm
+ - const: iocfg_lb
+ - const: iocfg_bl
+ - const: iocfg_rb
+ - const: iocfg_rt
+ - const: eint
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+ interrupts:
+ description: The interrupt outputs to sysirq
+ maxItems: 1
+
+ mediatek,rsel-resistance-in-si-unit:
+ type: boolean
+ description:
+ Identifying i2c pins pull up/down type which is RSEL. It can support RSEL
+ define or si unit value(ohm) to set different resistance.
+
+# PIN CONFIGURATION NODES
+patternProperties:
+ '-pins$':
+ type: object
+ additionalProperties: false
+ patternProperties:
+ '^pins':
+ type: object
+ additionalProperties: false
+ description: |
+ A pinctrl node should contain at least one subnodes representing the
+ pinctrl groups available on the machine. Each subnode will list the
+ pins it needs, and how they should be configured, with regard to muxer
+ configuration, pullups, drive strength, input enable/disable and input
+ schmitt.
+ An example of using macro:
+ pincontroller {
+ /* GPIO0 set as multifunction GPIO0 */
+ gpio-pins {
+ pins {
+ pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
+ }
+ };
+ /* GPIO128 set as multifunction SDA0 */
+ i2c0-pins {
+ pins {
+ pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
+ }
+ };
+ };
+ $ref: pinmux-node.yaml
+
+ properties:
+ pinmux:
+ description:
+ Integer array, represents gpio pin number and mux setting.
+ Supported pin number and mux varies for different SoCs, and are
+ defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly.
+
+ drive-strength:
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+ drive-strength-microamp:
+ enum: [125, 250, 500, 1000]
+
+ bias-pull-down:
+ oneOf:
+ - type: boolean
+ - enum: [100, 101, 102, 103]
+ description: mt8186 pull down PUPD/R0/R1 type define value.
+ - enum: [200, 201, 202, 203]
+ description: mt8186 pull down RSEL type define value.
+ - enum: [75000, 5000]
+ description: mt8186 pull down RSEL type si unit value(ohm).
+ description: |
+ For pull down type is normal, it don't need add RSEL & R1R0 define
+ and resistance value.
+ For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
+ set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+ "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
+ "MTK_PUPD_SET_R1R0_11" define in mt8186.
+ For pull down type is RSEL, it can add RSEL define & resistance
+ value(ohm) to set different resistance by identifying property
+ "mediatek,rsel-resistance-in-si-unit".
+ It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" &
+ "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" define in
+ mt8186. It can also support resistance value(ohm) "75000" & "5000"
+ in mt8186.
+ An example of using RSEL define:
+ pincontroller {
+ i2c0_pin {
+ pins {
+ pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
+ bias-pull-down = <MTK_PULL_SET_RSEL_001>;
+ }
+ };
+ };
+ An example of using si unit resistance value(ohm):
+ &pio {
+ mediatek,rsel-resistance-in-si-unit;
+ }
+ pincontroller {
+ i2c0_pin {
+ pins {
+ pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
+ bias-pull-down = <75000>;
+ }
+ };
+ };
+
+ bias-pull-up:
+ oneOf:
+ - type: boolean
+ - enum: [100, 101, 102, 103]
+ description: mt8186 pull up PUPD/R0/R1 type define value.
+ - enum: [200, 201, 202, 203]
+ description: mt8186 pull up RSEL type define value.
+ - enum: [1000, 5000, 10000, 75000]
+ description: mt8186 pull up RSEL type si unit value(ohm).
+ description: |
+ For pull up type is normal, it don't need add RSEL & R1R0 define
+ and resistance value.
+ For pull up type is PUPD/R0/R1 type, it can add R1R0 define to
+ set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+ "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
+ "MTK_PUPD_SET_R1R0_11" define in mt8186.
+ For pull up type is RSEL, it can add RSEL define & resistance
+ value(ohm) to set different resistance by identifying property
+ "mediatek,rsel-resistance-in-si-unit".
+ It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" &
+ "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" define in
+ mt8186. It can also support resistance value(ohm) "1000" & "5000"
+ & "10000" & "75000" in mt8186.
+ An example of using si unit resistance value(ohm):
+ &pio {
+ mediatek,rsel-resistance-in-si-unit;
+ }
+ pincontroller {
+ i2c0-pins {
+ pins {
+ pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
+ bias-pull-up = <1000>;
+ }
+ };
+ };
+
+ bias-disable: true
+
+ output-high: true
+
+ output-low: true
+
+ input-enable: true
+
+ input-disable: true
+
+ input-schmitt-enable: true
+
+ input-schmitt-disable: true
+
+ required:
+ - pinmux
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/mt8186-pinfunc.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ pio: pinctrl@10005000 {
+ compatible = "mediatek,mt8186-pinctrl";
+ reg = <0x10005000 0x1000>,
+ <0x10002000 0x0200>,
+ <0x10002200 0x0200>,
+ <0x10002400 0x0200>,
+ <0x10002600 0x0200>,
+ <0x10002A00 0x0200>,
+ <0x10002c00 0x0200>,
+ <0x1000b000 0x1000>;
+ reg-names = "iocfg0", "iocfg_lt", "iocfg_lm",
+ "iocfg_lb", "iocfg_bl", "iocfg_rb",
+ "iocfg_rt", "eint";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pio 0 0 185>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>;
+ #interrupt-cells = <2>;
+
+ pio-pins {
+ pins {
+ pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
+ output-low;
+ };
+ };
+
+ spi0-pins {
+ pins-spi {
+ pinmux = <PINMUX_GPIO0__FUNC_SPI0_CLK_B>,
+ <PINMUX_GPIO1__FUNC_SPI0_CSB_B>,
+ <PINMUX_GPIO2__FUNC_SPI0_MO_B>;
+ bias-disable;
+ };
+ pins-spi-mi {
+ pinmux = <PINMUX_GPIO3__FUNC_SPI0_MI_B>;
+ bias-pull-down;
+ };
+ };
+
+ i2c0-pins {
+ pins {
+ pinmux = <PINMUX_GPIO127__FUNC_SCL0>,
+ <PINMUX_GPIO128__FUNC_SDA0>;
+ bias-pull-up = <MTK_PULL_SET_RSEL_001>;
+ drive-strength-microamp = <1000>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8188-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8188-pinctrl.yaml
new file mode 100644
index 0000000000..e994b0c70d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8188-pinctrl.yaml
@@ -0,0 +1,232 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8188-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT8188 Pin Controller
+
+maintainers:
+ - Hui Liu <hui.liu@mediatek.com>
+
+description:
+ The MediaTek's MT8188 Pin controller is used to control SoC pins.
+
+properties:
+ compatible:
+ const: mediatek,mt8188-pinctrl
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ description:
+ Number of cells in GPIO specifier, should be two. The first cell is the
+ pin number, the second cell is used to specify optional parameters which
+ are defined in <dt-bindings/gpio/gpio.h>.
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ gpio-line-names: true
+
+ reg:
+ items:
+ - description: gpio registers base address
+ - description: rm group io configuration registers base address
+ - description: lt group io configuration registers base address
+ - description: lm group io configuration registers base address
+ - description: rt group io configuration registers base address
+ - description: eint registers base address
+
+ reg-names:
+ items:
+ - const: iocfg0
+ - const: iocfg_rm
+ - const: iocfg_lt
+ - const: iocfg_lm
+ - const: iocfg_rt
+ - const: eint
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+ interrupts:
+ description: The interrupt outputs to sysirq.
+ maxItems: 1
+
+ mediatek,rsel-resistance-in-si-unit:
+ type: boolean
+ description:
+ We provide two methods to select the resistance for I2C when pull up or
+ pull down. The first is by RSEL definition value, another one is by
+ resistance value(ohm). This flag is used to identify if the method is
+ resistance(si unit) value.
+
+# PIN CONFIGURATION NODES
+patternProperties:
+ '-pins$':
+ type: object
+ additionalProperties: false
+
+ patternProperties:
+ '^pins':
+ type: object
+ $ref: /schemas/pinctrl/pincfg-node.yaml
+ additionalProperties: false
+ description:
+ A pinctrl node should contain at least one subnode representing the
+ pinctrl groups available on the machine. Each subnode will list the
+ pins it needs, and how they should be configured, with regard to muxer
+ configuration, pullups, drive strength, input enable/disable and input
+ schmitt.
+
+ properties:
+ pinmux:
+ description:
+ Integer array, represents gpio pin number and mux setting.
+ Supported pin number and mux varies for different SoCs, and are
+ defined as macros in dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h
+ directly, for this SoC.
+
+ drive-strength:
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+ drive-strength-microamp:
+ enum: [125, 250, 500, 1000]
+
+ bias-pull-down:
+ oneOf:
+ - type: boolean
+ - enum: [100, 101, 102, 103]
+ description: mt8188 pull down PUPD/R0/R1 type define value.
+ - enum: [200, 201, 202, 203, 204, 205, 206, 207]
+ description: mt8188 pull down RSEL type define value.
+ - enum: [75000, 5000]
+ description: mt8188 pull down RSEL type si unit value(ohm).
+ description: |
+ For pull down type is normal, it doesn't need add RSEL & R1R0
+ define and resistance value.
+ For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
+ set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+ "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
+ "MTK_PUPD_SET_R1R0_11" define in mt8188.
+ For pull down type is RSEL, it can add RSEL define & resistance
+ value(ohm) to set different resistance by identifying property
+ "mediatek,rsel-resistance-in-si-unit". It can support
+ "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" &
+ "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" &
+ "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101" &
+ "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111" define in
+ mt8188. It can also support resistance value(ohm) "75000" & "5000"
+ in mt8188.
+
+ bias-pull-up:
+ oneOf:
+ - type: boolean
+ - enum: [100, 101, 102, 103]
+ description: mt8188 pull up PUPD/R0/R1 type define value.
+ - enum: [200, 201, 202, 203, 204, 205, 206, 207]
+ description: mt8188 pull up RSEL type define value.
+ - enum: [1000, 1500, 2000, 3000, 4000, 5000, 10000, 75000]
+ description: mt8188 pull up RSEL type si unit value(ohm).
+ description: |
+ For pull up type is normal, it don't need add RSEL & R1R0 define
+ and resistance value.
+ For pull up type is PUPD/R0/R1 type, it can add R1R0 define to set
+ different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+ "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
+ "MTK_PUPD_SET_R1R0_11" define in mt8188.
+ For pull up type is RSEL, it can add RSEL define & resistance
+ value(ohm) to set different resistance by identifying property
+ "mediatek,rsel-resistance-in-si-unit". It can support
+ "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" &
+ "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" &
+ "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101" &
+ "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111" define in
+ mt8188. It can also support resistance value(ohm) "1000" & "1500"
+ & "2000" & "3000" & "4000" & "5000" & "10000" & "75000" in mt8188.
+
+ bias-disable: true
+
+ output-high: true
+
+ output-low: true
+
+ input-enable: true
+
+ input-disable: true
+
+ input-schmitt-enable: true
+
+ input-schmitt-disable: true
+
+ required:
+ - pinmux
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ pio: pinctrl@10005000 {
+ compatible = "mediatek,mt8188-pinctrl";
+ reg = <0x10005000 0x1000>,
+ <0x11c00000 0x1000>,
+ <0x11e10000 0x1000>,
+ <0x11e20000 0x1000>,
+ <0x11ea0000 0x1000>,
+ <0x1000b000 0x1000>;
+ reg-names = "iocfg0", "iocfg_rm",
+ "iocfg_lt", "iocfg_lm", "iocfg_rt",
+ "eint";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pio 0 0 176>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH 0>;
+ #interrupt-cells = <2>;
+
+ pio-pins {
+ pins {
+ pinmux = <PINMUX_GPIO0__FUNC_B_GPIO0>;
+ output-low;
+ };
+ };
+
+ spi0-pins {
+ pins-spi {
+ pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>,
+ <PINMUX_GPIO76__FUNC_O_SPIM1_CLK>,
+ <PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>;
+ drive-strength = <6>;
+ };
+ pins-spi-mi {
+ pinmux = <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+ };
+
+ i2c0-pins {
+ pins {
+ pinmux = <PINMUX_GPIO55__FUNC_B1_SCL0>,
+ <PINMUX_GPIO56__FUNC_B1_SDA0>;
+ bias-disable;
+ drive-strength-microamp = <1000>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8192-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8192-pinctrl.yaml
new file mode 100644
index 0000000000..1686427eb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8192-pinctrl.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8192-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT8192 Pin Controller
+
+maintainers:
+ - Sean Wang <sean.wang@mediatek.com>
+
+description:
+ The MediaTek's MT8192 Pin controller is used to control SoC pins.
+
+properties:
+ compatible:
+ const: mediatek,mt8192-pinctrl
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ description:
+ Number of cells in GPIO specifier. Since the generic GPIO binding is used,
+ the amount of cells must be specified as 2. See the below mentioned gpio
+ binding representation for description of particular cells.
+ const: 2
+
+ gpio-ranges:
+ description: GPIO valid number range.
+ maxItems: 1
+
+ gpio-line-names: true
+
+ reg:
+ description:
+ Physical address base for GPIO base registers. There are 11 GPIO physical
+ address base in mt8192.
+ maxItems: 11
+
+ reg-names:
+ description:
+ GPIO base register names.
+ maxItems: 11
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+ interrupts:
+ description: The interrupt outputs to sysirq.
+ maxItems: 1
+
+# PIN CONFIGURATION NODES
+patternProperties:
+ '-pins$':
+ type: object
+ additionalProperties: false
+ patternProperties:
+ '^pins':
+ type: object
+ description:
+ A pinctrl node should contain at least one subnodes representing the
+ pinctrl groups available on the machine. Each subnode will list the
+ pins it needs, and how they should be configured, with regard to muxer
+ configuration, pullups, drive strength, input enable/disable and input
+ schmitt.
+ $ref: pinmux-node.yaml
+
+ properties:
+ pinmux:
+ description:
+ Integer array, represents gpio pin number and mux setting.
+ Supported pin number and mux varies for different SoCs, and are
+ defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly.
+
+ drive-strength:
+ description:
+ It can support some arguments, such as MTK_DRIVE_4mA,
+ MTK_DRIVE_6mA, etc. See dt-bindings/pinctrl/mt65xx.h. It can only
+ support 2/4/6/8/10/12/14/16mA in mt8192.
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+ drive-strength-microamp:
+ enum: [125, 250, 500, 1000]
+
+ bias-pull-down:
+ oneOf:
+ - type: boolean
+ description: normal pull down.
+ - enum: [100, 101, 102, 103]
+ description: PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0_
+ defines in dt-bindings/pinctrl/mt65xx.h.
+ - enum: [200, 201, 202, 203]
+ description: RSEL pull down type. See MTK_PULL_SET_RSEL_ defines
+ in dt-bindings/pinctrl/mt65xx.h.
+
+ bias-pull-up:
+ oneOf:
+ - type: boolean
+ description: normal pull up.
+ - enum: [100, 101, 102, 103]
+ description: PUPD/R1/R0 pull up type. See MTK_PUPD_SET_R1R0_
+ defines in dt-bindings/pinctrl/mt65xx.h.
+ - enum: [200, 201, 202, 203]
+ description: RSEL pull up type. See MTK_PULL_SET_RSEL_ defines
+ in dt-bindings/pinctrl/mt65xx.h.
+
+ bias-disable: true
+
+ output-high: true
+
+ output-low: true
+
+ input-enable: true
+
+ input-disable: true
+
+ input-schmitt-enable: true
+
+ input-schmitt-disable: true
+
+ required:
+ - pinmux
+
+ additionalProperties: false
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/mt8192-pinfunc.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ pio: pinctrl@10005000 {
+ compatible = "mediatek,mt8192-pinctrl";
+ reg = <0x10005000 0x1000>,
+ <0x11c20000 0x1000>,
+ <0x11d10000 0x1000>,
+ <0x11d30000 0x1000>,
+ <0x11d40000 0x1000>,
+ <0x11e20000 0x1000>,
+ <0x11e70000 0x1000>,
+ <0x11ea0000 0x1000>,
+ <0x11f20000 0x1000>,
+ <0x11f30000 0x1000>,
+ <0x1000b000 0x1000>;
+ reg-names = "iocfg0", "iocfg_rm", "iocfg_bm",
+ "iocfg_bl", "iocfg_br", "iocfg_lm",
+ "iocfg_lb", "iocfg_rt", "iocfg_lt",
+ "iocfg_tl", "eint";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pio 0 0 220>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH 0>;
+ #interrupt-cells = <2>;
+
+ spi1-default-pins {
+ pins-cs-mosi-clk {
+ pinmux = <PINMUX_GPIO157__FUNC_SPI1_A_CSB>,
+ <PINMUX_GPIO159__FUNC_SPI1_A_MO>,
+ <PINMUX_GPIO156__FUNC_SPI1_A_CLK>;
+ bias-disable;
+ };
+
+ pins-miso {
+ pinmux = <PINMUX_GPIO158__FUNC_SPI1_A_MI>;
+ bias-pull-down;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8195-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8195-pinctrl.yaml
new file mode 100644
index 0000000000..33cb71775d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8195-pinctrl.yaml
@@ -0,0 +1,286 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8195-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT8195 Pin Controller
+
+maintainers:
+ - Sean Wang <sean.wang@mediatek.com>
+
+description:
+ The MediaTek's MT8195 Pin controller is used to control SoC pins.
+
+properties:
+ compatible:
+ const: mediatek,mt8195-pinctrl
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ description:
+ Number of cells in GPIO specifier. Since the generic GPIO binding is used,
+ the amount of cells must be specified as 2. See the below mentioned gpio
+ binding representation for description of particular cells.
+ const: 2
+
+ gpio-ranges:
+ description: GPIO valid number range.
+ maxItems: 1
+
+ gpio-line-names: true
+
+ reg:
+ description:
+ Physical address base for GPIO base registers. There are 8 GPIO physical
+ address base in mt8195.
+ maxItems: 8
+
+ reg-names:
+ description:
+ GPIO base register names.
+ maxItems: 8
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+ interrupts:
+ description: The interrupt outputs to sysirq.
+ maxItems: 1
+
+ mediatek,rsel-resistance-in-si-unit:
+ type: boolean
+ description:
+ Identifying i2c pins pull up/down type which is RSEL. It can support RSEL
+ define or si unit value(ohm) to set different resistance.
+
+# PIN CONFIGURATION NODES
+patternProperties:
+ '-pins$':
+ type: object
+ additionalProperties: false
+ patternProperties:
+ '^pins':
+ type: object
+ additionalProperties: false
+ description: |
+ A pinctrl node should contain at least one subnodes representing the
+ pinctrl groups available on the machine. Each subnode will list the
+ pins it needs, and how they should be configured, with regard to muxer
+ configuration, pullups, drive strength, input enable/disable and input
+ schmitt.
+ An example of using macro:
+ pincontroller {
+ /* GPIO0 set as multifunction GPIO0 */
+ gpio-pins {
+ pins {
+ pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
+ }
+ };
+ /* GPIO8 set as multifunction SDA0 */
+ i2c0-pins {
+ pins {
+ pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+ }
+ };
+ };
+ $ref: pinmux-node.yaml
+
+ properties:
+ pinmux:
+ description:
+ Integer array, represents gpio pin number and mux setting.
+ Supported pin number and mux varies for different SoCs, and are
+ defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly.
+
+ drive-strength:
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+ drive-strength-microamp:
+ enum: [125, 250, 500, 1000]
+
+ bias-pull-down:
+ oneOf:
+ - type: boolean
+ - enum: [100, 101, 102, 103]
+ description: mt8195 pull down PUPD/R0/R1 type define value.
+ - enum: [200, 201, 202, 203, 204, 205, 206, 207]
+ description: mt8195 pull down RSEL type define value.
+ - enum: [75000, 5000]
+ description: mt8195 pull down RSEL type si unit value(ohm).
+ description: |
+ For pull down type is normal, it don't need add RSEL & R1R0 define
+ and resistance value.
+ For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
+ set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+ "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
+ "MTK_PUPD_SET_R1R0_11" define in mt8195.
+ For pull down type is RSEL, it can add RSEL define & resistance
+ value(ohm) to set different resistance by identifying property
+ "mediatek,rsel-resistance-in-si-unit".
+ It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
+ & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011"
+ & "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101"
+ & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
+ define in mt8195. It can also support resistance value(ohm)
+ "75000" & "5000" in mt8195.
+
+ An example of using RSEL define:
+ pincontroller {
+ i2c0_pin {
+ pins {
+ pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+ bias-pull-down = <MTK_PULL_SET_RSEL_001>;
+ }
+ };
+ };
+ An example of using si unit resistance value(ohm):
+ &pio {
+ mediatek,rsel-resistance-in-si-unit;
+ }
+ pincontroller {
+ i2c0_pin {
+ pins {
+ pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+ bias-pull-down = <75000>;
+ }
+ };
+ };
+
+ bias-pull-up:
+ oneOf:
+ - type: boolean
+ - enum: [100, 101, 102, 103]
+ description: mt8195 pull up PUPD/R0/R1 type define value.
+ - enum: [200, 201, 202, 203, 204, 205, 206, 207]
+ description: mt8195 pull up RSEL type define value.
+ - enum: [1000, 1500, 2000, 3000, 4000, 5000, 10000, 75000]
+ description: mt8195 pull up RSEL type si unit value(ohm).
+ description: |
+ For pull up type is normal, it don't need add RSEL & R1R0 define
+ and resistance value.
+ For pull up type is PUPD/R0/R1 type, it can add R1R0 define to
+ set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+ "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
+ "MTK_PUPD_SET_R1R0_11" define in mt8195.
+ For pull up type is RSEL, it can add RSEL define & resistance
+ value(ohm) to set different resistance by identifying property
+ "mediatek,rsel-resistance-in-si-unit".
+ It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
+ & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011"
+ & "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101"
+ & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
+ define in mt8195. It can also support resistance value(ohm) "1000"
+ & "1500" & "2000" & "3000" & "4000" & "5000" & "10000" & "75000"
+ in mt8195.
+ An example of using RSEL define:
+ pincontroller {
+ i2c0-pins {
+ pins {
+ pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+ bias-pull-up = <MTK_PULL_SET_RSEL_001>;
+ }
+ };
+ };
+ An example of using si unit resistance value(ohm):
+ &pio {
+ mediatek,rsel-resistance-in-si-unit;
+ }
+ pincontroller {
+ i2c0-pins {
+ pins {
+ pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+ bias-pull-up = <1000>;
+ }
+ };
+ };
+
+ bias-disable: true
+
+ output-high: true
+
+ output-low: true
+
+ input-enable: true
+
+ input-disable: true
+
+ input-schmitt-enable: true
+
+ input-schmitt-disable: true
+
+ required:
+ - pinmux
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #
+ pio: pinctrl@10005000 {
+ compatible = "mediatek,mt8195-pinctrl";
+ reg = <0x10005000 0x1000>,
+ <0x11d10000 0x1000>,
+ <0x11d30000 0x1000>,
+ <0x11d40000 0x1000>,
+ <0x11e20000 0x1000>,
+ <0x11eb0000 0x1000>,
+ <0x11f40000 0x1000>,
+ <0x1000b000 0x1000>;
+ reg-names = "iocfg0", "iocfg_bm", "iocfg_bl",
+ "iocfg_br", "iocfg_lm", "iocfg_rb",
+ "iocfg_tl", "eint";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pio 0 0 144>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH 0>;
+ #interrupt-cells = <2>;
+
+ pio-pins {
+ pins {
+ pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
+ output-low;
+ };
+ };
+
+ spi0-pins {
+ pins-spi {
+ pinmux = <PINMUX_GPIO132__FUNC_SPIM0_CSB>,
+ <PINMUX_GPIO134__FUNC_SPIM0_MO>,
+ <PINMUX_GPIO133__FUNC_SPIM0_CLK>;
+ bias-disable;
+ };
+ pins-spi-mi {
+ pinmux = <PINMUX_GPIO135__FUNC_SPIM0_MI>;
+ bias-pull-down;
+ };
+ };
+
+ i2c0-pins {
+ pins {
+ pinmux = <PINMUX_GPIO8__FUNC_SDA0>,
+ <PINMUX_GPIO9__FUNC_SCL0>;
+ bias-disable;
+ drive-strength-microamp = <1000>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml
new file mode 100644
index 0000000000..7b43e78572
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml
@@ -0,0 +1,230 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8365-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT8365 Pin Controller
+
+maintainers:
+ - Zhiyong Tao <zhiyong.tao@mediatek.com>
+ - Bernhard Rosenkränzer <bero@baylibre.com>
+
+description:
+ The MediaTek's MT8365 Pin controller is used to control SoC pins.
+
+properties:
+ compatible:
+ const: mediatek,mt8365-pinctrl
+
+ reg:
+ maxItems: 1
+
+ mediatek,pctl-regmap:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ maxItems: 1
+ minItems: 1
+ maxItems: 2
+ description:
+ Should be phandles of the syscfg node.
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+ description:
+ Number of cells in GPIO specifier. Since the generic GPIO binding is used,
+ the amount of cells must be specified as 2. See the below mentioned gpio
+ binding representation for description of particular cells.
+
+ interrupt-controller: true
+
+ interrupts:
+ maxItems: 1
+
+ "#interrupt-cells":
+ const: 2
+
+patternProperties:
+ "-pins$":
+ type: object
+ additionalProperties: false
+ patternProperties:
+ "pins$":
+ type: object
+ additionalProperties: false
+ description:
+ A pinctrl node should contain at least one subnode representing the
+ pinctrl groups available on the machine. Each subnode will list the
+ pins it needs, and how they should be configured, with regard to muxer
+ configuration, pullups, drive strength, input enable/disable and input
+ schmitt.
+ $ref: /schemas/pinctrl/pincfg-node.yaml
+
+ properties:
+ pinmux:
+ description:
+ Integer array, represents gpio pin number and mux setting.
+ Supported pin number and mux varies for different SoCs, and are
+ defined as macros in <soc>-pinfunc.h directly.
+
+ bias-disable: true
+
+ bias-pull-up:
+ oneOf:
+ - type: boolean
+ - enum: [100, 101, 102, 103]
+ description: Pull up R1/R0 type define value.
+ description: |
+ For pull up type is normal, it don't need add R1/R0 define.
+ For pull up type is R1/R0 type, it can add value to set different
+ resistance. Valid arguments are described as below:
+ 100: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+ 101: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+ 102: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+ 103: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+
+ bias-pull-down:
+ oneOf:
+ - type: boolean
+ - enum: [100, 101, 102, 103]
+ description: Pull down R1/R0 type define value.
+ description: |
+ For pull down type is normal, it don't need add R1/R0 define.
+ For pull down type is R1/R0 type, it can add value to set
+ different resistance. Valid arguments are described as below:
+ 100: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+ 101: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+ 102: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+ 103: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+
+ drive-strength:
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+ input-enable: true
+
+ input-disable: true
+
+ output-low: true
+
+ output-high: true
+
+ input-schmitt-enable: true
+
+ input-schmitt-disable: true
+
+ drive-strength-microamp:
+ enum: [125, 250, 500, 1000]
+
+ mediatek,drive-strength-adv:
+ deprecated: true
+ description: |
+ DEPRECATED: Please use drive-strength-microamp instead.
+ Describe the specific driving setup property.
+ For I2C pins, the existing generic driving setup can only support
+ 2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they
+ can support 0.125/0.25/0.5/1mA adjustment. If we enable specific
+ driving setup, the existing generic setup will be disabled.
+ The specific driving setup is controlled by E1E0EN.
+ When E1=0/E0=0, the strength is 0.125mA.
+ When E1=0/E0=1, the strength is 0.25mA.
+ When E1=1/E0=0, the strength is 0.5mA.
+ When E1=1/E0=1, the strength is 1mA.
+ EN is used to enable or disable the specific driving setup.
+ Valid arguments are described as below:
+ 0: (E1, E0, EN) = (0, 0, 0)
+ 1: (E1, E0, EN) = (0, 0, 1)
+ 2: (E1, E0, EN) = (0, 1, 0)
+ 3: (E1, E0, EN) = (0, 1, 1)
+ 4: (E1, E0, EN) = (1, 0, 0)
+ 5: (E1, E0, EN) = (1, 0, 1)
+ 6: (E1, E0, EN) = (1, 1, 0)
+ 7: (E1, E0, EN) = (1, 1, 1)
+ So the valid arguments are from 0 to 7.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3, 4, 5, 6, 7]
+
+ mediatek,pull-up-adv:
+ deprecated: true
+ description: |
+ DEPRECATED: Please use bias-pull-up instead.
+ Pull up settings for 2 pull resistors, R0 and R1. User can
+ configure those special pins. Valid arguments are described as
+ below:
+ 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+ 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+ 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+ 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+
+ mediatek,pull-down-adv:
+ deprecated: true
+ description: |
+ DEPRECATED: Please use bias-pull-down instead.
+ Pull down settings for 2 pull resistors, R0 and R1. User can
+ configure those special pins. Valid arguments are described as
+ below:
+ 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+ 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+ 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+ 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+
+ mediatek,tdsel:
+ description:
+ An integer describing the steps for output level shifter duty
+ cycle when asserted (high pulse width adjustment). Valid arguments
+ are from 0 to 15.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ mediatek,rdsel:
+ description:
+ An integer describing the steps for input level shifter duty cycle
+ when asserted (high pulse width adjustment). Valid arguments are
+ from 0 to 63.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ required:
+ - pinmux
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - "#gpio-cells"
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/pinctrl/mt8365-pinfunc.h>
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pio: pinctrl@1000b000 {
+ compatible = "mediatek,mt8365-pinctrl";
+ reg = <0 0x1000b000 0 0x1000>;
+ mediatek,pctl-regmap = <&syscfg_pctl>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+
+ pio-pins {
+ pins {
+ pinmux = <MT8365_PIN_59_SDA1__FUNC_SDA1_0>, <MT8365_PIN_60_SCL1__FUNC_SCL1_0>;
+ mediatek,pull-up-adv = <3>;
+ bias-pull-up;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/microchip,pic32-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/microchip,pic32-pinctrl.txt
new file mode 100644
index 0000000000..51efd20851
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/microchip,pic32-pinctrl.txt
@@ -0,0 +1,60 @@
+* Microchip PIC32 Pin Controller
+
+Please refer to pinctrl-bindings.txt, ../gpio/gpio.txt, and
+../interrupt-controller/interrupts.txt for generic information regarding
+pin controller, GPIO, and interrupt bindings.
+
+PIC32 'pin configuration node' is a node of a group of pins which can be
+used for a specific device or function. This node represents configurations of
+pins, optional function, and optional mux related configuration.
+
+Required properties for pin controller node:
+ - compatible: "microchip,pic32mada-pinctrl"
+ - reg: Address range of the pinctrl registers.
+ - clocks: Clock specifier (see clock bindings for details)
+
+Required properties for pin configuration sub-nodes:
+ - pins: List of pins to which the configuration applies.
+
+Optional properties for pin configuration sub-nodes:
+----------------------------------------------------
+ - function: Mux function for the specified pins.
+ - bias-pull-up: Enable weak pull-up.
+ - bias-pull-down: Enable weak pull-down.
+ - input-enable: Set the pin as an input.
+ - output-low: Set the pin as an output level low.
+ - output-high: Set the pin as an output level high.
+ - microchip,digital: Enable digital I/O.
+ - microchip,analog: Enable analog I/O.
+
+Example:
+
+pic32_pinctrl: pinctrl@1f801400{
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "microchip,pic32mzda-pinctrl";
+ reg = <0x1f801400 0x400>;
+ clocks = <&rootclk PB1CLK>;
+
+ pinctrl_uart2: pinctrl_uart2 {
+ uart2-tx {
+ pins = "G9";
+ function = "U2TX";
+ microchip,digital;
+ output-low;
+ };
+ uart2-rx {
+ pins = "B0";
+ function = "U2RX";
+ microchip,digital;
+ input-enable;
+ };
+ };
+};
+
+uart2: serial@1f822200 {
+ compatible = "microchip,pic32mzda-uart";
+ reg = <0x1f822200 0x50>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml b/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
new file mode 100644
index 0000000000..0df4e114fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml
@@ -0,0 +1,168 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/microchip,sparx5-sgpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microsemi/Microchip Serial GPIO controller
+
+maintainers:
+ - Lars Povlsen <lars.povlsen@microchip.com>
+
+description: |
+ By using a serial interface, the SIO controller significantly extend
+ the number of available GPIOs with a minimum number of additional
+ pins on the device. The primary purpose of the SIO controllers is to
+ connect control signals from SFP modules and to act as an LED
+ controller.
+
+properties:
+ $nodename:
+ pattern: "^gpio@[0-9a-f]+$"
+
+ compatible:
+ enum:
+ - microchip,sparx5-sgpio
+ - mscc,ocelot-sgpio
+ - mscc,luton-sgpio
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ microchip,sgpio-port-ranges:
+ description: This is a sequence of tuples, defining intervals of
+ enabled ports in the serial input stream. The enabled ports must
+ match the hardware configuration in order for signals to be
+ properly written/read to/from the controller holding
+ registers. Being tuples, then number of arguments must be
+ even. The tuples mast be ordered (low, high) and are
+ inclusive.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ items:
+ - description: |
+ "low" indicates start bit number of range
+ minimum: 0
+ maximum: 31
+ - description: |
+ "high" indicates end bit number of range
+ minimum: 0
+ maximum: 31
+ minItems: 1
+ maxItems: 32
+
+ bus-frequency:
+ description: The sgpio controller frequency (Hz). This dictates
+ the serial bitstream speed, which again affects the latency in
+ getting control signals back and forth between external shift
+ registers. The speed must be no larger than half the system
+ clock, and larger than zero.
+ default: 12500000
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: switch
+
+patternProperties:
+ "^gpio@[0-1]$":
+ type: object
+ properties:
+ compatible:
+ const: microchip,sparx5-sgpio-bank
+
+ reg:
+ description: |
+ The GPIO bank number. "0" is designates the input pin bank,
+ "1" the output bank.
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ description: |
+ Specifies the pin (port and bit) and flags. Note that the
+ SGIO pin is defined by *2* numbers, a port number between 0
+ and 31, and a bit index, 0 to 3. The maximum bit number is
+ controlled indirectly by the "ngpios" property: (ngpios/32).
+ const: 3
+
+ interrupts:
+ description: Specifies the sgpio IRQ (in parent controller)
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ description:
+ Specifies the pin (port and bit) and flags, as defined in
+ defined in include/dt-bindings/interrupt-controller/irq.h
+ const: 3
+
+ ngpios:
+ description: The numbers of GPIO's exposed. This must be a
+ multiple of 32.
+ minimum: 32
+ maximum: 128
+
+ required:
+ - compatible
+ - reg
+ - gpio-controller
+ - '#gpio-cells'
+ - ngpios
+
+ additionalProperties: false
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - microchip,sgpio-port-ranges
+ - "#address-cells"
+ - "#size-cells"
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ sgpio2: gpio@1101059c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "microchip,sparx5-sgpio";
+ clocks = <&sys_clk>;
+ pinctrl-0 = <&sgpio2_pins>;
+ pinctrl-names = "default";
+ reg = <0x1101059c 0x118>;
+ microchip,sgpio-port-ranges = <0 0>, <16 18>, <28 31>;
+ bus-frequency = <25000000>;
+ sgpio_in2: gpio@0 {
+ reg = <0>;
+ compatible = "microchip,sparx5-sgpio-bank";
+ gpio-controller;
+ #gpio-cells = <3>;
+ ngpios = <96>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+ sgpio_out2: gpio@1 {
+ compatible = "microchip,sparx5-sgpio-bank";
+ reg = <1>;
+ gpio-controller;
+ #gpio-cells = <3>;
+ ngpios = <96>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml
new file mode 100644
index 0000000000..dbb3e1bd58
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mscc,ocelot-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microsemi Ocelot pin controller
+
+maintainers:
+ - Alexandre Belloni <alexandre.belloni@bootlin.com>
+ - Lars Povlsen <lars.povlsen@microchip.com>
+
+properties:
+ compatible:
+ enum:
+ - microchip,lan966x-pinctrl
+ - microchip,sparx5-pinctrl
+ - mscc,jaguar2-pinctrl
+ - mscc,luton-pinctrl
+ - mscc,ocelot-pinctrl
+ - mscc,serval-pinctrl
+ - mscc,servalt-pinctrl
+
+ reg:
+ items:
+ - description: Base address
+ - description: Extended pin configuration registers
+ minItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ gpio-ranges: true
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ description: Optional shared switch reset.
+ items:
+ - const: switch
+
+patternProperties:
+ '-pins$':
+ type: object
+ allOf:
+ - $ref: pinmux-node.yaml
+ - $ref: pincfg-node.yaml
+
+ properties:
+ function: true
+ pins: true
+ output-high: true
+ output-low: true
+ drive-strength: true
+
+ required:
+ - function
+ - pins
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+
+allOf:
+ - $ref: pinctrl.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - microchip,lan966x-pinctrl
+ - microchip,sparx5-pinctrl
+ then:
+ properties:
+ reg:
+ minItems: 2
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio: pinctrl@71070034 {
+ compatible = "mscc,ocelot-pinctrl";
+ reg = <0x71070034 0x28>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&gpio 0 0 22>;
+
+ uart_pins: uart-pins {
+ pins = "GPIO_6", "GPIO_7";
+ function = "uart";
+ };
+
+ uart2_pins: uart2-pins {
+ pins = "GPIO_12", "GPIO_13";
+ function = "uart2";
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm7xx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm7xx-pinctrl.txt
new file mode 100644
index 0000000000..a1264cc866
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm7xx-pinctrl.txt
@@ -0,0 +1,216 @@
+Nuvoton NPCM7XX Pin Controllers
+
+The Nuvoton BMC NPCM7XX Pin Controller multi-function routed through
+the multiplexing block, Each pin supports GPIO functionality (GPIOx)
+and multiple functions that directly connect the pin to different
+hardware blocks.
+
+Required properties:
+- #address-cells : should be 1.
+- #size-cells : should be 1.
+- compatible : "nuvoton,npcm750-pinctrl" for Poleg NPCM7XX.
+- ranges : defines mapping ranges between pin controller node (parent)
+ to GPIO bank node (children).
+
+=== GPIO Bank Subnode ===
+
+The NPCM7XX has 8 GPIO Banks each GPIO bank supports 32 GPIO.
+
+Required GPIO Bank subnode-properties:
+- reg : specifies physical base address and size of the GPIO
+ bank registers.
+- gpio-controller : Marks the device node as a GPIO controller.
+- #gpio-cells : Must be <2>. The first cell is the gpio pin number
+ and the second cell is used for optional parameters.
+- interrupts : contain the GPIO bank interrupt with flags for falling edge.
+- gpio-ranges : defines the range of pins managed by the GPIO bank controller.
+
+For example, GPIO bank subnodes like the following:
+ gpio0: gpio@f0010000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x0 0x80>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-ranges = <&pinctrl 0 0 32>;
+ };
+
+=== Pin Mux Subnode ===
+
+- pin: A string containing the name of the pin
+ An array of strings, each string containing the name of a pin.
+ These pin are used for selecting pin configuration.
+
+The following are the list of pins available:
+ "GPIO0/IOX1DI", "GPIO1/IOX1LD", "GPIO2/IOX1CK", "GPIO3/IOX1D0",
+ "GPIO4/IOX2DI/SMB1DSDA", "GPIO5/IOX2LD/SMB1DSCL", "GPIO6/IOX2CK/SMB2DSDA",
+ "GPIO7/IOX2D0/SMB2DSCL", "GPIO8/LKGPO1", "GPIO9/LKGPO2", "GPIO10/IOXHLD",
+ "GPIO11/IOXHCK", "GPIO12/GSPICK/SMB5BSCL", "GPIO13/GSPIDO/SMB5BSDA",
+ "GPIO14/GSPIDI/SMB5CSCL", "GPIO15/GSPICS/SMB5CSDA", "GPIO16/LKGPO0",
+ "GPIO17/PSPI2DI/SMB4DEN","GPIO18/PSPI2D0/SMB4BSDA", "GPIO19/PSPI2CK/SMB4BSCL",
+ "GPIO20/SMB4CSDA/SMB15SDA", "GPIO21/SMB4CSCL/SMB15SCL", "GPIO22/SMB4DSDA/SMB14SDA",
+ "GPIO23/SMB4DSCL/SMB14SCL", "GPIO24/IOXHDO", "GPIO25/IOXHDI", "GPIO26/SMB5SDA",
+ "GPIO27/SMB5SCL", "GPIO28/SMB4SDA", "GPIO29/SMB4SCL", "GPIO30/SMB3SDA",
+ "GPIO31/SMB3SCL", "GPIO32/nSPI0CS1","SPI0D2", "SPI0D3", "GPIO37/SMB3CSDA",
+ "GPIO38/SMB3CSCL", "GPIO39/SMB3BSDA", "GPIO40/SMB3BSCL", "GPIO41/BSPRXD",
+ "GPO42/BSPTXD/STRAP11", "GPIO43/RXD1/JTMS2/BU1RXD", "GPIO44/nCTS1/JTDI2/BU1CTS",
+ "GPIO45/nDCD1/JTDO2", "GPIO46/nDSR1/JTCK2", "GPIO47/nRI1/JCP_RDY2",
+ "GPIO48/TXD2/BSPTXD", "GPIO49/RXD2/BSPRXD", "GPIO50/nCTS2", "GPO51/nRTS2/STRAP2",
+ "GPIO52/nDCD2", "GPO53/nDTR2_BOUT2/STRAP1", "GPIO54/nDSR2", "GPIO55/nRI2",
+ "GPIO56/R1RXERR", "GPIO57/R1MDC", "GPIO58/R1MDIO", "GPIO59/SMB3DSDA",
+ "GPIO60/SMB3DSCL", "GPO61/nDTR1_BOUT1/STRAP6", "GPO62/nRTST1/STRAP5",
+ "GPO63/TXD1/STRAP4", "GPIO64/FANIN0", "GPIO65/FANIN1", "GPIO66/FANIN2",
+ "GPIO67/FANIN3", "GPIO68/FANIN4", "GPIO69/FANIN5", "GPIO70/FANIN6", "GPIO71/FANIN7",
+ "GPIO72/FANIN8", "GPIO73/FANIN9", "GPIO74/FANIN10", "GPIO75/FANIN11",
+ "GPIO76/FANIN12", "GPIO77/FANIN13","GPIO78/FANIN14", "GPIO79/FANIN15",
+ "GPIO80/PWM0", "GPIO81/PWM1", "GPIO82/PWM2", "GPIO83/PWM3", "GPIO84/R2TXD0",
+ "GPIO85/R2TXD1", "GPIO86/R2TXEN", "GPIO87/R2RXD0", "GPIO88/R2RXD1", "GPIO89/R2CRSDV",
+ "GPIO90/R2RXERR", "GPIO91/R2MDC", "GPIO92/R2MDIO", "GPIO93/GA20/SMB5DSCL",
+ "GPIO94/nKBRST/SMB5DSDA", "GPIO95/nLRESET/nESPIRST", "GPIO96/RG1TXD0",
+ "GPIO97/RG1TXD1", "GPIO98/RG1TXD2", "GPIO99/RG1TXD3","GPIO100/RG1TXC",
+ "GPIO101/RG1TXCTL", "GPIO102/RG1RXD0", "GPIO103/RG1RXD1", "GPIO104/RG1RXD2",
+ "GPIO105/RG1RXD3", "GPIO106/RG1RXC", "GPIO107/RG1RXCTL", "GPIO108/RG1MDC",
+ "GPIO109/RG1MDIO", "GPIO110/RG2TXD0/DDRV0", "GPIO111/RG2TXD1/DDRV1",
+ "GPIO112/RG2TXD2/DDRV2", "GPIO113/RG2TXD3/DDRV3", "GPIO114/SMB0SCL",
+ "GPIO115/SMB0SDA", "GPIO116/SMB1SCL", "GPIO117/SMB1SDA", "GPIO118/SMB2SCL",
+ "GPIO119/SMB2SDA", "GPIO120/SMB2CSDA", "GPIO121/SMB2CSCL", "GPIO122/SMB2BSDA",
+ "GPIO123/SMB2BSCL", "GPIO124/SMB1CSDA", "GPIO125/SMB1CSCL","GPIO126/SMB1BSDA",
+ "GPIO127/SMB1BSCL", "GPIO128/SMB8SCL", "GPIO129/SMB8SDA", "GPIO130/SMB9SCL",
+ "GPIO131/SMB9SDA", "GPIO132/SMB10SCL", "GPIO133/SMB10SDA","GPIO134/SMB11SCL",
+ "GPIO135/SMB11SDA", "GPIO136/SD1DT0", "GPIO137/SD1DT1", "GPIO138/SD1DT2",
+ "GPIO139/SD1DT3", "GPIO140/SD1CLK", "GPIO141/SD1WP", "GPIO142/SD1CMD",
+ "GPIO143/SD1CD/SD1PWR", "GPIO144/PWM4", "GPIO145/PWM5", "GPIO146/PWM6",
+ "GPIO147/PWM7", "GPIO148/MMCDT4", "GPIO149/MMCDT5", "GPIO150/MMCDT6",
+ "GPIO151/MMCDT7", "GPIO152/MMCCLK", "GPIO153/MMCWP", "GPIO154/MMCCMD",
+ "GPIO155/nMMCCD/nMMCRST", "GPIO156/MMCDT0", "GPIO157/MMCDT1", "GPIO158/MMCDT2",
+ "GPIO159/MMCDT3", "GPIO160/CLKOUT/RNGOSCOUT", "GPIO161/nLFRAME/nESPICS",
+ "GPIO162/SERIRQ", "GPIO163/LCLK/ESPICLK", "GPIO164/LAD0/ESPI_IO0",
+ "GPIO165/LAD1/ESPI_IO1", "GPIO166/LAD2/ESPI_IO2", "GPIO167/LAD3/ESPI_IO3",
+ "GPIO168/nCLKRUN/nESPIALERT", "GPIO169/nSCIPME", "GPIO170/nSMI", "GPIO171/SMB6SCL",
+ "GPIO172/SMB6SDA", "GPIO173/SMB7SCL", "GPIO174/SMB7SDA", "GPIO175/PSPI1CK/FANIN19",
+ "GPIO176/PSPI1DO/FANIN18", "GPIO177/PSPI1DI/FANIN17", "GPIO178/R1TXD0",
+ "GPIO179/R1TXD1", "GPIO180/R1TXEN", "GPIO181/R1RXD0", "GPIO182/R1RXD1",
+ "GPIO183/SPI3CK", "GPO184/SPI3D0/STRAP9", "GPO185/SPI3D1/STRAP10",
+ "GPIO186/nSPI3CS0", "GPIO187/nSPI3CS1", "GPIO188/SPI3D2/nSPI3CS2",
+ "GPIO189/SPI3D3/nSPI3CS3", "GPIO190/nPRD_SMI", "GPIO191", "GPIO192", "GPIO193/R1CRSDV",
+ "GPIO194/SMB0BSCL", "GPIO195/SMB0BSDA", "GPIO196/SMB0CSCL", "GPIO197/SMB0DEN",
+ "GPIO198/SMB0DSDA", "GPIO199/SMB0DSCL", "GPIO200/R2CK", "GPIO201/R1CK",
+ "GPIO202/SMB0CSDA", "GPIO203/FANIN16", "GPIO204/DDC2SCL", "GPIO205/DDC2SDA",
+ "GPIO206/HSYNC2", "GPIO207/VSYNC2", "GPIO208/RG2TXC/DVCK", "GPIO209/RG2TXCTL/DDRV4",
+ "GPIO210/RG2RXD0/DDRV5", "GPIO211/RG2RXD1/DDRV6", "GPIO212/RG2RXD2/DDRV7",
+ "GPIO213/RG2RXD3/DDRV8", "GPIO214/RG2RXC/DDRV9", "GPIO215/RG2RXCTL/DDRV10",
+ "GPIO216/RG2MDC/DDRV11", "GPIO217/RG2MDIO/DVHSYNC", "GPIO218/nWDO1",
+ "GPIO219/nWDO2", "GPIO220/SMB12SCL", "GPIO221/SMB12SDA", "GPIO222/SMB13SCL",
+ "GPIO223/SMB13SDA", "GPIO224/SPIXCK", "GPO225/SPIXD0/STRAP12", "GPO226/SPIXD1/STRAP13",
+ "GPIO227/nSPIXCS0", "GPIO228/nSPIXCS1", "GPO229/SPIXD2/STRAP3", "GPIO230/SPIXD3",
+ "GPIO231/nCLKREQ", "GPI255/DACOSEL"
+
+Optional Properties:
+ bias-disable, bias-pull-down, bias-pull-up, input-enable,
+ input-disable, output-high, output-low, drive-push-pull,
+ drive-open-drain, input-debounce, slew-rate, drive-strength
+
+ slew-rate valid arguments are:
+ <0> - slow
+ <1> - fast
+ drive-strength valid arguments are:
+ <2> - 2mA
+ <4> - 4mA
+ <8> - 8mA
+ <12> - 12mA
+ <16> - 16mA
+ <24> - 24mA
+
+For example, pinctrl might have pinmux subnodes like the following:
+
+ gpio0_iox1d1_pin: gpio0-iox1d1-pin {
+ pins = "GPIO0/IOX1DI";
+ output-high;
+ };
+ gpio0_iox1ck_pin: gpio0-iox1ck-pin {
+ pins = "GPIO2/IOX1CK";
+ output_high;
+ };
+
+=== Pin Group Subnode ===
+
+Required pin group subnode-properties:
+- groups : A string containing the name of the group to mux.
+- function: A string containing the name of the function to mux to the
+ group.
+
+The following are the list of the available groups and functions :
+ smb0, smb0b, smb0c, smb0d, smb0den, smb1, smb1b, smb1c, smb1d,
+ smb2, smb2b, smb2c, smb2d, smb3, smb3b, smb3c, smb3d, smb4, smb4b,
+ smb4c, smb4d, smb4den, smb5, smb5b, smb5c, smb5d, ga20kbc, smb6,
+ smb7, smb8, smb9, smb10, smb11, smb12, smb13, smb14, smb15, fanin0,
+ fanin1, fanin2, fanin3, fanin4, fanin5, fanin6, fanin7, fanin8,
+ fanin9, fanin10, fanin11 fanin12 fanin13, fanin14, fanin15, faninx,
+ pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, pwm6, pwm7, rg1, rg1mdio, rg2,
+ rg2mdio, ddr, uart1, uart2, bmcuart0a, bmcuart0b, bmcuart1, iox1,
+ iox2, ioxh, gspi, mmc, mmcwp, mmccd, mmcrst, mmc8, r1, r1err, r1md,
+ r2, r2err, r2md, sd1, sd1pwr, wdog1, wdog2, scipme, sci, serirq,
+ jtag2, spix, spixcs1, pspi1, pspi2, ddc, clkreq, clkout, spi3, spi3cs1,
+ spi3quad, spi3cs2, spi3cs3, spi0cs1, lpc, lpcclk, espi, lkgpo0, lkgpo1,
+ lkgpo2, nprd_smi
+
+For example, pinctrl might have group subnodes like the following:
+ r1err_pins: r1err-pins {
+ groups = "r1err";
+ function = "r1err";
+ };
+ r1md_pins: r1md-pins {
+ groups = "r1md";
+ function = "r1md";
+ };
+ r1_pins: r1-pins {
+ groups = "r1";
+ function = "r1";
+ };
+
+Examples
+========
+pinctrl: pinctrl@f0800000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "nuvoton,npcm750-pinctrl";
+ ranges = <0 0xf0010000 0x8000>;
+
+ gpio0: gpio@f0010000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x0 0x80>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-ranges = <&pinctrl 0 0 32>;
+ };
+
+ ....
+
+ gpio7: gpio@f0017000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x7000 0x80>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-ranges = <&pinctrl 0 224 32>;
+ };
+
+ gpio0_iox1d1_pin: gpio0-iox1d1-pin {
+ pins = "GPIO0/IOX1DI";
+ output-high;
+ };
+
+ iox1_pins: iox1-pins {
+ groups = "iox1";
+ function = "iox1";
+ };
+ iox2_pins: iox2-pins {
+ groups = "iox2";
+ function = "iox2";
+ };
+
+ ....
+
+ clkreq_pins: clkreq-pins {
+ groups = "clkreq";
+ function = "clkreq";
+ };
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml
new file mode 100644
index 0000000000..7b7f840ffc
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nuvoton,wpcm450-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton WPCM450 pin control and GPIO
+
+maintainers:
+ - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+
+properties:
+ compatible:
+ const: nuvoton,wpcm450-pinctrl
+
+ reg:
+ maxItems: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+patternProperties:
+ # There are three kinds of subnodes:
+ # 1. a GPIO controller node for each GPIO bank
+ # 2. a pinmux node configures pin muxing for a group of pins (e.g. rmii2)
+ # 3. a pinconf node configures properties of a single pin
+
+ "^gpio@[0-7]$":
+ type: object
+ additionalProperties: false
+
+ description:
+ Eight GPIO banks (gpio@0 to gpio@7), that each contain between 14 and 18
+ GPIOs. Some GPIOs support interrupts.
+
+ properties:
+ reg:
+ minimum: 0
+ maximum: 7
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+
+ interrupts:
+ maxItems: 3
+ description:
+ The interrupts associated with this GPIO bank
+
+ required:
+ - reg
+ - gpio-controller
+ - '#gpio-cells'
+
+ "^mux-":
+ $ref: pinmux-node.yaml#
+
+ properties:
+ groups:
+ description:
+ One or more groups of pins to mux to a certain function
+ items:
+ enum: [ smb3, smb4, smb5, scs1, scs2, scs3, smb0, smb1, smb2, bsp,
+ hsp1, hsp2, r1err, r1md, rmii2, r2err, r2md, kbcc, dvo,
+ clko, smi, uinc, gspi, mben, xcs2, xcs1, sdio, sspi, fi0,
+ fi1, fi2, fi3, fi4, fi5, fi6, fi7, fi8, fi9, fi10, fi11,
+ fi12, fi13, fi14, fi15, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5,
+ pwm6, pwm7, hg0, hg1, hg2, hg3, hg4, hg5, hg6, hg7 ]
+ function:
+ description:
+ The function that a group of pins is muxed to
+ enum: [ smb3, smb4, smb5, scs1, scs2, scs3, smb0, smb1, smb2, bsp,
+ hsp1, hsp2, r1err, r1md, rmii2, r2err, r2md, kbcc, dvo0,
+ dvo1, dvo2, dvo3, dvo4, dvo5, dvo6, dvo7, clko, smi, uinc,
+ gspi, mben, xcs2, xcs1, sdio, sspi, fi0, fi1, fi2, fi3, fi4,
+ fi5, fi6, fi7, fi8, fi9, fi10, fi11, fi12, fi13, fi14, fi15,
+ pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, pwm6, pwm7, hg0, hg1,
+ hg2, hg3, hg4, hg5, hg6, hg7, gpio ]
+
+ dependencies:
+ groups: [ function ]
+ function: [ groups ]
+
+ additionalProperties: false
+
+ "^cfg-":
+ $ref: pincfg-node.yaml#
+
+ properties:
+ pins:
+ description:
+ A list of pins to configure in certain ways, such as enabling
+ debouncing
+ items:
+ pattern: "^gpio1?[0-9]{1,2}$"
+
+ input-debounce: true
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+ pinctrl: pinctrl@b8003000 {
+ compatible = "nuvoton,wpcm450-pinctrl";
+ reg = <0xb8003000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio0: gpio@0 {
+ reg = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+ <3 IRQ_TYPE_LEVEL_HIGH>,
+ <4 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ mux-rmii2 {
+ groups = "rmii2";
+ function = "rmii2";
+ };
+
+ pinmux_uid: mux-uid {
+ groups = "gspi", "sspi";
+ function = "gpio";
+ };
+
+ pinctrl_uid: cfg-uid {
+ pins = "gpio14";
+ input-debounce = <1>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uid>, <&pinmux_uid>;
+
+ button-uid {
+ label = "UID";
+ linux,code = <102>;
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra-pinmux-common.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra-pinmux-common.yaml
new file mode 100644
index 0000000000..96c608bcb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra-pinmux-common.yaml
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra-pinmux-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Pinmux Controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jonathan Hunter <jonathanh@nvidia.com>
+
+description: |
+ Please refer to pinctrl-bindings.txt in this directory for details of the
+ common pinctrl bindings used by client devices, including the meaning of
+ the phrase "pin configuration node".
+
+ Tegra's pin configuration nodes act as a container for an arbitrary number
+ of subnodes. Each of these subnodes represents some desired configuration
+ for a pin, a group, or a list of pins or groups. This configuration can
+ include the mux function to select on those pin(s)/ group(s), and various
+ pin configuration parameters, such as pull-up, tristate, drive strength,
+ etc.
+
+ The name of each subnode is not important; all subnodes should be
+ enumerated and processed purely based on their content.
+
+ Each subnode only affects those parameters that are explicitly listed. In
+ other words, a subnode that lists a mux function but no pin configuration
+ parameters implies no information about any pin configuration parameters.
+
+ Similarly, a pin subnode that describes a pullup parameter implies no
+ information about e.g. the mux function or tristate parameter. For this
+ reason, even seemingly boolean values are actually tristates in this
+ binding: unspecified, off, or on. Unspecified is represented as an absent
+ property, and off/on are represented as integer values 0 and 1.
+
+ Note that many of these properties are only valid for certain specific pins
+ or groups. See the Tegra TRM and various pinmux spreadsheets for complete
+ details regarding which groups support which functionality. The Linux
+ pinctrl driver may also be a useful reference, since it consolidates,
+ disambiguates, and corrects data from all those sources.
+
+properties:
+ nvidia,pins:
+ $ref: /schemas/types.yaml#/definitions/string-array
+ description: An array of strings. Each string contains the name of a pin
+ or group. Valid values for these names are listed below.
+
+ nvidia,function:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: A string containing the name of the function to mux to the
+ pin or group. Valid values for function names are listed below. See the
+ Tegra TRM to determine which are valid for each pin or group.
+
+ nvidia,pull:
+ description: Pull-down/up setting to apply to the pin.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ oneOf:
+ - description: none
+ const: 0
+ - description: down
+ const: 1
+ - description: up
+ const: 2
+
+ nvidia,tristate:
+ description: Tristate setting to apply to the pin.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ oneOf:
+ - description: drive
+ const: 0
+ - description: tristate
+ const: 1
+
+ nvidia,schmitt:
+ description: Enable Schmitt trigger on the input.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ oneOf:
+ - description: disable Schmitt trigger on the input
+ const: 0
+ - description: enable Schmitt trigger on the input
+ const: 1
+
+ nvidia,pull-down-strength:
+ description: Controls drive strength. 0 is weakest. The range of valid
+ values depends on the pingroup. See "CAL_DRVDN" in the Tegra TRM.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ nvidia,pull-up-strength:
+ description: Controls drive strength. 0 is weakest. The range of valid
+ values depends on the pingroup. See "CAL_DRVUP" in the Tegra TRM.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ nvidia,high-speed-mode:
+ description: Enable high speed mode the pins.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ oneOf:
+ - description: normal speed mode
+ const: 0
+ - description: high speed mode
+ const: 1
+
+ nvidia,low-power-mode:
+ description: Controls the drive power or current. Valid values are from 0
+ through 3, where 0 specifies the least power and 3 specifies the most
+ power. See "Low Power Mode" or "LPMD1" and "LPMD0" in the Tegra TRM.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1, 2, 3 ]
+
+ nvidia,enable-input:
+ description: Enable the pin's input path.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ oneOf:
+ - description: disable input (i.e. output only)
+ const: 0
+ - description: enable input
+ const: 1
+
+ nvidia,open-drain:
+ description: Open-drain configuration for the pin.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ oneOf:
+ - description: disable open-drain
+ const: 0
+ - description: enable open-drain
+ const: 1
+
+ nvidia,lock:
+ description: Lock the pin configuration against further changes until
+ reset.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ oneOf:
+ - description: disable pin configuration lock
+ const: 0
+ - description: enable pin configuration lock
+ const: 1
+
+ nvidia,io-reset:
+ description: reset the I/O path
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1 ]
+
+ nvidia,rcv-sel:
+ description: select VIL/VIH receivers
+ $ref: /schemas/types.yaml#/definitions/uint32
+ oneOf:
+ - description: normal receivers
+ const: 0
+ - description: high-voltage receivers
+ const: 1
+
+ nvidia,drive-type:
+ description: Drive type to configure for the pin.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1, 2, 3 ]
+
+ nvidia,io-hv:
+ description: Select high-voltage receivers.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ oneOf:
+ - description: Use normal receivers.
+ const: 0
+ - description: Use high-voltage receivers.
+ const: 1
+
+ nvidia,slew-rate-rising:
+ description: Controls rising signal slew rate. 0 is fastest. The range of
+ valid values depends on the pingroup. See "DRVDN_SLWR" in the Tegra TRM.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ nvidia,slew-rate-falling:
+ description: Controls falling signal slew rate. 0 is fastest. The range of
+ valid values depends on the pingroup. See "DRVUP_SLWF" in the Tegra TRM.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+additionalProperties: true
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.yaml
new file mode 100644
index 0000000000..1690c0ef55
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra114-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra114 pinmux Controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+ compatible:
+ const: nvidia,tegra114-pinmux
+
+ reg:
+ items:
+ - description: pad control registers
+ - description: mux registers
+
+patternProperties:
+ "^pinmux(-[a-z0-9-_]+)?$":
+ type: object
+
+ # pin groups
+ additionalProperties:
+ $ref: nvidia,tegra-pinmux-common.yaml
+ additionalProperties: false
+ properties:
+ nvidia,pins:
+ items:
+ enum: [ ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3,
+ ulpi_data3_po4, ulpi_data4_po5, ulpi_data5_po6,
+ ulpi_data6_po7, ulpi_data7_po0, ulpi_clk_py0, ulpi_dir_py1,
+ ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0, dap3_din_pp1,
+ dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0,
+ sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5,
+ sdmmc1_dat1_py6, sdmmc1_dat0_py7, clk2_out_pw5,
+ clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4, ddc_sda_pv5,
+ uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6,
+ uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7,
+ uart3_cts_n_pa1, uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4,
+ pu5, pu6, gen1_i2c_sda_pc5, gen1_i2c_scl_pc4, dap4_fs_pp4,
+ dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7, clk3_out_pee0,
+ clk3_req_pee1, gmi_wp_n_pc7, gmi_iordy_pi5, gmi_wait_pi7,
+ gmi_adv_n_pk0, gmi_clk_pk1, gmi_cs0_n_pj0, gmi_cs1_n_pj2,
+ gmi_cs2_n_pk3, gmi_cs3_n_pk4, gmi_cs4_n_pk2, gmi_cs6_n_pi3,
+ gmi_cs7_n_pi6, gmi_ad0_pg0, gmi_ad1_pg1, gmi_ad2_pg2,
+ gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5, gmi_ad6_pg6,
+ gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2,
+ gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6,
+ gmi_ad15_ph7, gmi_a16_pj7, gmi_a17_pb0, gmi_a18_pb1,
+ gmi_a19_pk7, gmi_wr_n_pi0, gmi_oe_n_pi1, gmi_dqs_p_pj3,
+ gmi_rst_n_pi4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6,
+ sdmmc4_clk_pcc4, sdmmc4_cmd_pt7, sdmmc4_dat0_paa0,
+ sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3,
+ sdmmc4_dat4_paa4, sdmmc4_dat5_paa5, sdmmc4_dat6_paa6,
+ sdmmc4_dat7_paa7, cam_mclk_pcc0, pcc1, pbb0,
+ cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6,
+ pbb7, pcc2, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, kb_row0_pr0,
+ kb_row1_pr1, kb_row2_pr2, kb_row3_pr3, kb_row4_pr4,
+ kb_row5_pr5, kb_row6_pr6, kb_row7_pr7, kb_row8_ps0,
+ kb_row9_ps1, kb_row10_ps2, kb_col0_pq0, kb_col1_pq1,
+ kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5,
+ kb_col6_pq6, kb_col7_pq7, clk_32k_out_pa0, sys_clk_req_pz5,
+ core_pwr_req, cpu_pwr_req, pwr_int_n, owr, dap1_fs_pn0,
+ dap1_din_pn1, dap1_dout_pn2, dap1_sclk_pn3, clk1_req_pee2,
+ clk1_out_pw4, spdif_in_pk6, spdif_out_pk5, dap2_fs_pa2,
+ dap2_din_pa4, dap2_dout_pa5, dap2_sclk_pa3, dvfs_pwm_px0,
+ gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2,
+ gpio_x4_aud_px4, gpio_x5_aud_px5, gpio_x6_aud_px6,
+ gpio_x7_aud_px7, sdmmc3_clk_pa6, sdmmc3_cmd_pa7,
+ sdmmc3_dat0_pb7, sdmmc3_dat1_pb6, sdmmc3_dat2_pb5,
+ sdmmc3_dat3_pb4, hdmi_cec_pee3, sdmmc1_wp_n_pv3,
+ sdmmc3_cd_n_pv2, gpio_w2_aud_pw2, gpio_w3_aud_pw3,
+ usb_vbus_en0_pn4, usb_vbus_en1_pn5, sdmmc3_clk_lb_in_pee5,
+ sdmmc3_clk_lb_out_pee4, reset_out_n,
+ # drive groups
+ drive_ao1, drive_ao2, drive_at1, drive_at2, drive_at3,
+ drive_at4, drive_at5, drive_cdev1, drive_cdev2, drive_dap1,
+ drive_dap2, drive_dap3, drive_dap4, drive_dbg, drive_sdio3,
+ drive_spi, drive_uaa, drive_uab, drive_uart2, drive_uart3,
+ drive_sdio1, drive_ddc, drive_gma, drive_gme, drive_gmf,
+ drive_gmg, drive_gmh, drive_owr, drive_uda ]
+
+ nvidia,function:
+ enum: [ blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3,
+ displaya, displaya_alt, displayb, dtv, emc_dll, extperiph1,
+ extperiph2, extperiph3, gmi, gmi_alt, hda, hsi, i2c1, i2c2,
+ i2c3, i2c4, i2cpwr, i2s0, i2s1, i2s2, i2s3, i2s4, irda, kbc,
+ nand, nand_alt, owr, pmi, pwm0, pwm1, pwm2, pwm3, pwron,
+ reset_out_n, rsvd1, rsvd2, rsvd3, rsvd4, sdmmc1, sdmmc2,
+ sdmmc3, sdmmc4, soc, spdif, spi1, spi2, spi3, spi4, spi5,
+ spi6, sysclk, trace, uarta, uartb, uartc, uartd, ulpi, usb,
+ vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, vi, vi_alt1, vi_alt3 ]
+
+ nvidia,pull: true
+ nvidia,tristate: true
+ nvidia,schmitt: true
+ nvidia,pull-down-strength: true
+ nvidia,pull-up-strength: true
+ nvidia,high-speed-mode: true
+ nvidia,low-power-mode: true
+ nvidia,enable-input: true
+ nvidia,open-drain: true
+ nvidia,lock: true
+ nvidia,io-reset: true
+ nvidia,rcv-sel: true
+ nvidia,drive-type: true
+ nvidia,slew-rate-rising: true
+ nvidia,slew-rate-falling: true
+
+ required:
+ - nvidia,pins
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ pinmux@70000868 {
+ compatible = "nvidia,tegra114-pinmux";
+ reg = <0x70000868 0x148>, /* Pad control registers */
+ <0x70003000 0x40c>; /* PinMux registers */
+
+ pinmux {
+ sdmmc4_clk_pcc4 {
+ nvidia,pins = "sdmmc4_clk_pcc4";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
+
+ sdmmc4_dat0_paa0 {
+ nvidia,pins = "sdmmc4_dat0_paa0",
+ "sdmmc4_dat1_paa1",
+ "sdmmc4_dat2_paa2",
+ "sdmmc4_dat3_paa3",
+ "sdmmc4_dat4_paa4",
+ "sdmmc4_dat5_paa5",
+ "sdmmc4_dat6_paa6",
+ "sdmmc4_dat7_paa7";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.yaml
new file mode 100644
index 0000000000..9b7368bd38
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.yaml
@@ -0,0 +1,174 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra124-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra124 Pinmux Controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+description: The Tegra124 pinctrl binding is very similar to the Tegra20 and
+ Tegra30 pinctrl binding, as described in nvidia,tegra20-pinmux.yaml and
+ nvidia,tegra30-pinmux.yaml. In fact, this document assumes that binding as a
+ baseline, and only documents the differences between the two bindings.
+
+properties:
+ compatible:
+ oneOf:
+ - const: nvidia,tegra124-pinmux
+ - items:
+ - const: nvidia,tegra132-pinmux
+ - const: nvidia,tegra124-pinmux
+
+ reg:
+ items:
+ - description: driver strength and pad control registers
+ - description: pinmux registers
+ - description: MIPI_PAD_CTRL registers
+
+patternProperties:
+ "^pinmux(-[a-z0-9-_]+)?$":
+ type: object
+
+ # pin groups
+ additionalProperties:
+ $ref: nvidia,tegra-pinmux-common.yaml
+ additionalProperties: false
+ properties:
+ nvidia,pins:
+ $ref: /schemas/types.yaml#/definitions/string-array
+ items:
+ enum: [ ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3,
+ ulpi_data3_po4, ulpi_data4_po5, ulpi_data5_po6,
+ ulpi_data6_po7, ulpi_data7_po0, ulpi_clk_py0, ulpi_dir_py1,
+ ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0, dap3_din_pp1,
+ dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0,
+ sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5,
+ sdmmc1_dat1_py6, sdmmc1_dat0_py7, clk2_out_pw5,
+ clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4, ddc_sda_pv5,
+ uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6,
+ uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7,
+ uart3_cts_n_pa1, uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4,
+ pu5, pu6, gen1_i2c_scl_pc4, gen1_i2c_sda_pc5, dap4_fs_pp4,
+ dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7, clk3_out_pee0,
+ clk3_req_pee1, pc7, pi5, pi7, pk0, pk1, pj0, pj2, pk3, pk4,
+ pk2, pi3, pi6, pg0, pg1, pg2, pg3, pg4, pg5, pg6, pg7, ph0,
+ ph1, ph2, ph3, ph4, ph5, ph6, ph7, pj7, pb0, pb1, pk7, pi0,
+ pi1, pi2, pi4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6,
+ sdmmc4_clk_pcc4, sdmmc4_cmd_pt7, sdmmc4_dat0_paa0,
+ sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3,
+ sdmmc4_dat4_paa4, sdmmc4_dat5_paa5, sdmmc4_dat6_paa6,
+ sdmmc4_dat7_paa7, cam_mclk_pcc0, pcc1, pbb0,
+ cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6,
+ pbb7, pcc2, jtag_rtck, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7,
+ kb_row0_pr0, kb_row1_pr1, kb_row2_pr2, kb_row3_pr3,
+ kb_row4_pr4, kb_row5_pr5, kb_row6_pr6, kb_row7_pr7,
+ kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_row11_ps3,
+ kb_row12_ps4, kb_row13_ps5, kb_row14_ps6, kb_row15_ps7,
+ kb_col0_pq0, kb_col1_pq1, kb_col2_pq2, kb_col3_pq3,
+ kb_col4_pq4, kb_col5_pq5, kb_col6_pq6, kb_col7_pq7,
+ clk_32k_out_pa0, core_pwr_req, cpu_pwr_req, pwr_int_n,
+ clk_32k_in, owr, dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2,
+ dap1_sclk_pn3, dap_mclk1_req_pee2, dap_mclk1_pw4,
+ spdif_in_pk6, spdif_out_pk5, dap2_fs_pa2, dap2_din_pa4,
+ dap2_dout_pa5, dap2_sclk_pa3, dvfs_pwm_px0,
+ gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2,
+ gpio_x4_aud_px4, gpio_x5_aud_px5, gpio_x6_aud_px6,
+ gpio_x7_aud_px7, sdmmc3_clk_pa6, sdmmc3_cmd_pa7,
+ sdmmc3_dat0_pb7, sdmmc3_dat1_pb6, sdmmc3_dat2_pb5,
+ sdmmc3_dat3_pb4, pex_l0_rst_n_pdd1, pex_l0_clkreq_n_pdd2,
+ pex_wake_n_pdd3, pex_l1_rst_n_pdd5, pex_l1_clkreq_n_pdd6,
+ hdmi_cec_pee3, sdmmc1_wp_n_pv3, sdmmc3_cd_n_pv2,
+ gpio_w2_aud_pw2, gpio_w3_aud_pw3, usb_vbus_en0_pn4,
+ usb_vbus_en1_pn5, sdmmc3_clk_lb_out_pee4,
+ sdmmc3_clk_lb_in_pee5, gmi_clk_lb, reset_out_n,
+ kb_row16_pt0, kb_row17_pt1, usb_vbus_en2_pff1, pff2,
+ dp_hpd_pff0,
+ # drive groups
+ drive_ao1, drive_ao2, drive_at1, drive_at2, drive_at3,
+ drive_at4, drive_at5, drive_cdev1, drive_cdev2, drive_dap1,
+ drive_dap2, drive_dap3, drive_dap4, drive_dbg, drive_sdio3,
+ drive_spi, drive_uaa, drive_uab, drive_uart2, drive_uart3,
+ drive_sdio1, drive_ddc, drive_gma, drive_gme, drive_gmf,
+ drive_gmg, drive_gmh, drive_owr, drive_uda, drive_gpv,
+ drive_dev3, drive_cec, drive_usb_vbus_en, drive_ao3,
+ drive_ao0, drive_hv0, drive_sdio4, drive_ao4,
+ # MIPI pad control groups
+ mipi_pad_ctrl_dsi_b ]
+
+ nvidia,function:
+ enum: [ blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3,
+ displaya, displaya_alt, displayb, dtv, extperiph1,
+ extperiph2, extperiph3, gmi, gmi_alt, hda, hsi, i2c1, i2c2,
+ i2c3, i2c4, i2cpwr, i2s0, i2s1, i2s2, i2s3, i2s4, irda, kbc,
+ owr, pmi, pwm0, pwm1, pwm2, pwm3, pwron, reset_out_n, rsvd1,
+ rsvd2, rsvd3, rsvd4, sdmmc1, sdmmc2, sdmmc3, sdmmc4, soc,
+ spdif, spi1, spi2, spi3, spi4, spi5, spi6, trace, uarta,
+ uartb, uartc, uartd, ulpi, usb, vgp1, vgp2, vgp3, vgp4, vgp5,
+ vgp6, vi, vi_alt1, vi_alt3, vimclk2, vimclk2_alt, sata, ccla,
+ pe0, pe, pe1, dp, rtck, sys, clk, tmds, csi, dsi_b ]
+
+ nvidia,pull: true
+ nvidia,tristate: true
+ nvidia,schmitt: true
+ nvidia,pull-down-strength: true
+ nvidia,pull-up-strength: true
+ nvidia,high-speed-mode: true
+ nvidia,low-power-mode: true
+ nvidia,enable-input: true
+ nvidia,open-drain: true
+ nvidia,lock: true
+ nvidia,io-reset: true
+ nvidia,rcv-sel: true
+ nvidia,drive-type: true
+ nvidia,slew-rate-rising: true
+ nvidia,slew-rate-falling: true
+
+ required:
+ - nvidia,pins
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra124-car.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/pinctrl/pinctrl-tegra.h>
+
+ pinmux@70000868 {
+ compatible = "nvidia,tegra124-pinmux";
+ reg = <0x70000868 0x164>, /* Pad control registers */
+ <0x70003000 0x434>, /* Mux registers */
+ <0x70000820 0x8>; /* MIPI pad control */
+
+ sdmmc4_default: pinmux {
+ sdmmc4_clk_pcc4 {
+ nvidia,pins = "sdmmc4_clk_pcc4";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ sdmmc4_dat0_paa0 {
+ nvidia,pins = "sdmmc4_dat0_paa0",
+ "sdmmc4_dat1_paa1",
+ "sdmmc4_dat2_paa2",
+ "sdmmc4_dat3_paa3",
+ "sdmmc4_dat4_paa4",
+ "sdmmc4_dat5_paa5",
+ "sdmmc4_dat6_paa6",
+ "sdmmc4_dat7_paa7";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt
new file mode 100644
index 0000000000..02e971c39d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt
@@ -0,0 +1,135 @@
+Device tree binding for NVIDIA Tegra XUSB pad controller
+========================================================
+
+NOTE: It turns out that this binding isn't an accurate description of the XUSB
+pad controller. While the description is good enough for the functional subset
+required for PCIe and SATA, it lacks the flexibility to represent the features
+needed for USB. For the new binding, see ../phy/nvidia,tegra-xusb-padctl.txt.
+The binding described in this file is deprecated and should not be used.
+
+The Tegra XUSB pad controller manages a set of lanes, each of which can be
+assigned to one out of a set of different pads. Some of these pads have an
+associated PHY that must be powered up before the pad can be used.
+
+This document defines the device-specific binding for the XUSB pad controller.
+
+Refer to pinctrl-bindings.txt in this directory for generic information about
+pin controller device tree bindings and ../phy/phy-bindings.txt for details on
+how to describe and reference PHYs in device trees.
+
+Required properties:
+--------------------
+- compatible: For Tegra124, must contain "nvidia,tegra124-xusb-padctl".
+ Otherwise, must contain '"nvidia,<chip>-xusb-padctl",
+ "nvidia-tegra124-xusb-padctl"', where <chip> is tegra132 or tegra210.
+- reg: Physical base address and length of the controller's registers.
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+ - padctl
+- #phy-cells: Should be 1. The specifier is the index of the PHY to reference.
+ See <dt-bindings/pinctrl/pinctrl-tegra-xusb.h> for the list of valid values.
+
+Lane muxing:
+------------
+
+Child nodes contain the pinmux configurations following the conventions from
+the pinctrl-bindings.txt document. Typically a single, static configuration is
+given and applied at boot time.
+
+Each subnode describes groups of lanes along with parameters and pads that
+they should be assigned to. The name of these subnodes is not important. All
+subnodes should be parsed solely based on their content.
+
+Each subnode only applies the parameters that are explicitly listed. In other
+words, if a subnode that lists a function but no pin configuration parameters
+implies no information about any pin configuration parameters. Similarly, a
+subnode that describes only an IDDQ parameter implies no information about
+what function the pins are assigned to. For this reason even seemingly boolean
+values are actually tristates in this binding: unspecified, off or on.
+Unspecified is represented as an absent property, and off/on are represented
+as integer values 0 and 1.
+
+Required properties:
+- nvidia,lanes: An array of strings. Each string is the name of a lane.
+
+Optional properties:
+- nvidia,function: A string that is the name of the function (pad) that the
+ pin or group should be assigned to. Valid values for function names are
+ listed below.
+- nvidia,iddq: Enables IDDQ mode of the lane. (0: no, 1: yes)
+
+Note that not all of these properties are valid for all lanes. Lanes can be
+divided into three groups:
+
+ - otg-0, otg-1, otg-2:
+
+ Valid functions for this group are: "snps", "xusb", "uart", "rsvd".
+
+ The nvidia,iddq property does not apply to this group.
+
+ - ulpi-0, hsic-0, hsic-1:
+
+ Valid functions for this group are: "snps", "xusb".
+
+ The nvidia,iddq property does not apply to this group.
+
+ - pcie-0, pcie-1, pcie-2, pcie-3, pcie-4, sata-0:
+
+ Valid functions for this group are: "pcie", "usb3", "sata", "rsvd".
+
+
+Example:
+========
+
+SoC file extract:
+-----------------
+
+ padctl@7009f000 {
+ compatible = "nvidia,tegra124-xusb-padctl";
+ reg = <0x0 0x7009f000 0x0 0x1000>;
+ resets = <&tegra_car 142>;
+ reset-names = "padctl";
+
+ #phy-cells = <1>;
+ };
+
+Board file extract:
+-------------------
+
+ pcie-controller@1003000 {
+ ...
+
+ phys = <&padctl 0>;
+ phy-names = "pcie";
+
+ ...
+ };
+
+ ...
+
+ padctl: padctl@7009f000 {
+ pinctrl-0 = <&padctl_default>;
+ pinctrl-names = "default";
+
+ padctl_default: pinmux {
+ usb3 {
+ nvidia,lanes = "pcie-0", "pcie-1";
+ nvidia,function = "usb3";
+ nvidia,iddq = <0>;
+ };
+
+ pcie {
+ nvidia,lanes = "pcie-2", "pcie-3",
+ "pcie-4";
+ nvidia,function = "pcie";
+ nvidia,iddq = <0>;
+ };
+
+ sata {
+ nvidia,lanes = "sata-0";
+ nvidia,function = "sata";
+ nvidia,iddq = <0>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.yaml
new file mode 100644
index 0000000000..87b6f4f42f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra194-pinmux.yaml
@@ -0,0 +1,282 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra194-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra194 Pinmux Controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+ compatible:
+ enum:
+ - nvidia,tegra194-pinmux
+ - nvidia,tegra194-pinmux-aon
+
+ reg:
+ items:
+ - description: pinmux registers
+
+patternProperties:
+ "^pinmux(-[a-z0-9-_]+)?$":
+ type: object
+
+ # pin groups
+ additionalProperties:
+ $ref: nvidia,tegra-pinmux-common.yaml
+ unevaluatedProperties: false
+ properties:
+ nvidia,function:
+ enum: [ aud, can0, can1, ccla, dca, dcb, dgpu, directdc, directdc1,
+ displaya, displayb, dmic1, dmic2, dmic3, dmic4, dmic5, dp,
+ dspk0, dspk1, eqos, extperiph1, extperiph2, extperiph3,
+ extperiph4, gp, gpio, hdmi, i2c1, i2c2, i2c3, i2c5, i2c8,
+ i2s1, i2s2, i2s3, i2s4, i2s5, i2s6, igpu, iqc1, iqc2, mipi,
+ nv, pe0, pe1, pe2, pe3, pe4, pe5, qspi, qspi0, qspi1, rsvd0,
+ rsvd1, rsvd2, rsvd3, sata, sce, sdmmc1, sdmmc3, sdmmc4, slvs,
+ soc, spdif, spi1, spi2, spi3, touch, uarta, uartb, uartc,
+ uartd, uarte, uartg, ufs0, usb, vgp1, vgp2, vgp3, vgp4, vgp5,
+ vgp6, wdt ]
+
+ nvidia,pull: true
+ nvidia,tristate: true
+ nvidia,schmitt: true
+ nvidia,enable-input: true
+ nvidia,open-drain: true
+ nvidia,lock: true
+ nvidia,drive-type: true
+ nvidia,io-hv: true
+
+ required:
+ - nvidia,pins
+
+additionalProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ const: nvidia,tegra194-pinmux
+ then:
+ patternProperties:
+ "^pinmux(-[a-z0-9-_]+)?$":
+ type: object
+ additionalProperties:
+ properties:
+ nvidia,pins:
+ description: An array of strings. Each string contains the name
+ of a pin or group. Valid values for these names are listed
+ below.
+
+ Note that the pex_l5_clkreq_n_pgg0 and pex_l5_rst_n_pgg1 pins
+ are part of PCIE C5 power partition. Client devices must
+ enable this partition before accessing the configuration for
+ these pins.
+ items:
+ enum: [ dap6_sclk_pa0, dap6_dout_pa1, dap6_din_pa2,
+ dap6_fs_pa3, dap4_sclk_pa4, dap4_dout_pa5,
+ dap4_din_pa6, dap4_fs_pa7, cpu_pwr_req_0_pb0,
+ cpu_pwr_req_1_pb1, qspi0_sck_pc0, qspi0_cs_n_pc1,
+ qspi0_io0_pc2, qspi0_io1_pc3, qspi0_io2_pc4,
+ qspi0_io3_pc5, qspi1_sck_pc6, qspi1_cs_n_pc7,
+ qspi1_io0_pd0, qspi1_io1_pd1, qspi1_io2_pd2,
+ qspi1_io3_pd3, eqos_txc_pe0, eqos_td0_pe1,
+ eqos_td1_pe2, eqos_td2_pe3, eqos_td3_pe4,
+ eqos_tx_ctl_pe5, eqos_rd0_pe6, eqos_rd1_pe7,
+ eqos_rd2_pf0, eqos_rd3_pf1, eqos_rx_ctl_pf2,
+ eqos_rxc_pf3, eqos_sma_mdio_pf4, eqos_sma_mdc_pf5,
+ soc_gpio00_pg0, soc_gpio01_pg1, soc_gpio02_pg2,
+ soc_gpio03_pg3, soc_gpio08_pg4, soc_gpio09_pg5,
+ soc_gpio10_pg6, soc_gpio11_pg7, soc_gpio12_ph0,
+ soc_gpio13_ph1, soc_gpio14_ph2, uart4_tx_ph3,
+ uart4_rx_ph4, uart4_rts_ph5, uart4_cts_ph6,
+ dap2_sclk_ph7, dap2_dout_pi0, dap2_din_pi1,
+ dap2_fs_pi2, gen1_i2c_scl_pi3, gen1_i2c_sda_pi4,
+ sdmmc1_clk_pj0, sdmmc1_cmd_pj1, sdmmc1_dat0_pj2,
+ sdmmc1_dat1_pj3, sdmmc1_dat2_pj4, sdmmc1_dat3_pj5,
+ pex_l0_clkreq_n_pk0, pex_l0_rst_n_pk1,
+ pex_l1_clkreq_n_pk2, pex_l1_rst_n_pk3,
+ pex_l2_clkreq_n_pk4, pex_l2_rst_n_pk5,
+ pex_l3_clkreq_n_pk6, pex_l3_rst_n_pk7,
+ pex_l4_clkreq_n_pl0, pex_l4_rst_n_pl1,
+ pex_wake_n_pl2, sata_dev_slp_pl3, dp_aux_ch0_hpd_pm0,
+ dp_aux_ch1_hpd_pm1, dp_aux_ch2_hpd_pm2,
+ dp_aux_ch3_hpd_pm3, hdmi_cec_pm4, soc_gpio50_pm5,
+ soc_gpio51_pm6, soc_gpio52_pm7, soc_gpio53_pn0,
+ soc_gpio54_pn1, soc_gpio55_pn2, sdmmc3_clk_po0,
+ sdmmc3_cmd_po1, sdmmc3_dat0_po2, sdmmc3_dat1_po3,
+ sdmmc3_dat2_po4, sdmmc3_dat3_po5, extperiph1_clk_pp0,
+ extperiph2_clk_pp1, cam_i2c_scl_pp2, cam_i2c_sda_pp3,
+ soc_gpio04_pp4, soc_gpio05_pp5, soc_gpio06_pp6,
+ soc_gpio07_pp7, soc_gpio20_pq0, soc_gpio21_pq1,
+ soc_gpio22_pq2, soc_gpio23_pq3, soc_gpio40_pq4,
+ soc_gpio41_pq5, soc_gpio42_pq6, soc_gpio43_pq7,
+ soc_gpio44_pr0, soc_gpio45_pr1, uart1_tx_pr2,
+ uart1_rx_pr3, uart1_rts_pr4, uart1_cts_pr5,
+ dap1_sclk_ps0, dap1_dout_ps1, dap1_din_ps2,
+ dap1_fs_ps3, aud_mclk_ps4, soc_gpio30_ps5,
+ soc_gpio31_ps6, soc_gpio32_ps7, soc_gpio33_pt0,
+ dap3_sclk_pt1, dap3_dout_pt2, dap3_din_pt3,
+ dap3_fs_pt4, dap5_sclk_pt5, dap5_dout_pt6,
+ dap5_din_pt7, dap5_fs_pu0, directdc1_clk_pv0,
+ directdc1_in_pv1, directdc1_out0_pv2,
+ directdc1_out1_pv3, directdc1_out2_pv4,
+ directdc1_out3_pv5, directdc1_out4_pv6,
+ directdc1_out5_pv7, directdc1_out6_pw0,
+ directdc1_out7_pw1, gpu_pwr_req_px0, cv_pwr_req_px1,
+ gp_pwm2_px2, gp_pwm3_px3, uart2_tx_px4, uart2_rx_px5,
+ uart2_rts_px6, uart2_cts_px7, spi3_sck_py0,
+ spi3_miso_py1, spi3_mosi_py2, spi3_cs0_py3,
+ spi3_cs1_py4, uart5_tx_py5, uart5_rx_py6,
+ uart5_rts_py7, uart5_cts_pz0, usb_vbus_en0_pz1,
+ usb_vbus_en1_pz2, spi1_sck_pz3, spi1_miso_pz4,
+ spi1_mosi_pz5, spi1_cs0_pz6, spi1_cs1_pz7,
+ ufs0_ref_clk_pff0, ufs0_rst_pff1,
+ pex_l5_clkreq_n_pgg0, pex_l5_rst_n_pgg1,
+ directdc_comp, sdmmc4_clk, sdmmc4_cmd, sdmmc4_dqs,
+ sdmmc4_dat7, sdmmc4_dat6, sdmmc4_dat5, sdmmc4_dat4,
+ sdmmc4_dat3, sdmmc4_dat2, sdmmc4_dat1, sdmmc4_dat0,
+ sdmmc1_comp, sdmmc1_hv_trim, sdmmc3_comp,
+ sdmmc3_hv_trim, eqos_comp, qspi_comp,
+ # drive groups
+ drive_soc_gpio33_pt0, drive_soc_gpio32_ps7,
+ drive_soc_gpio31_ps6, drive_soc_gpio30_ps5,
+ drive_aud_mclk_ps4, drive_dap1_fs_ps3,
+ drive_dap1_din_ps2, drive_dap1_dout_ps1,
+ drive_dap1_sclk_ps0, drive_dap3_fs_pt4,
+ drive_dap3_din_pt3, drive_dap3_dout_pt2,
+ drive_dap3_sclk_pt1, drive_dap5_fs_pu0,
+ drive_dap5_din_pt7, drive_dap5_dout_pt6,
+ drive_dap5_sclk_pt5, drive_dap6_fs_pa3,
+ drive_dap6_din_pa2, drive_dap6_dout_pa1,
+ drive_dap6_sclk_pa0, drive_dap4_fs_pa7,
+ drive_dap4_din_pa6, drive_dap4_dout_pa5,
+ drive_dap4_sclk_pa4, drive_extperiph2_clk_pp1,
+ drive_extperiph1_clk_pp0, drive_cam_i2c_sda_pp3,
+ drive_cam_i2c_scl_pp2, drive_soc_gpio40_pq4,
+ drive_soc_gpio41_pq5, drive_soc_gpio42_pq6,
+ drive_soc_gpio43_pq7, drive_soc_gpio44_pr0,
+ drive_soc_gpio45_pr1, drive_soc_gpio20_pq0,
+ drive_soc_gpio21_pq1, drive_soc_gpio22_pq2,
+ drive_soc_gpio23_pq3, drive_soc_gpio04_pp4,
+ drive_soc_gpio05_pp5, drive_soc_gpio06_pp6,
+ drive_soc_gpio07_pp7, drive_uart1_cts_pr5,
+ drive_uart1_rts_pr4, drive_uart1_rx_pr3,
+ drive_uart1_tx_pr2, drive_dap2_din_pi1,
+ drive_dap2_dout_pi0, drive_dap2_fs_pi2,
+ drive_dap2_sclk_ph7, drive_uart4_cts_ph6,
+ drive_uart4_rts_ph5, drive_uart4_rx_ph4,
+ drive_uart4_tx_ph3, drive_soc_gpio03_pg3,
+ drive_soc_gpio02_pg2, drive_soc_gpio01_pg1,
+ drive_soc_gpio00_pg0, drive_gen1_i2c_scl_pi3,
+ drive_gen1_i2c_sda_pi4, drive_soc_gpio08_pg4,
+ drive_soc_gpio09_pg5, drive_soc_gpio10_pg6,
+ drive_soc_gpio11_pg7, drive_soc_gpio12_ph0,
+ drive_soc_gpio13_ph1, drive_soc_gpio14_ph2,
+ drive_soc_gpio50_pm5, drive_soc_gpio51_pm6,
+ drive_soc_gpio52_pm7, drive_soc_gpio53_pn0,
+ drive_soc_gpio54_pn1, drive_soc_gpio55_pn2,
+ drive_dp_aux_ch0_hpd_pm0, drive_dp_aux_ch1_hpd_pm1,
+ drive_dp_aux_ch2_hpd_pm2, drive_dp_aux_ch3_hpd_pm3,
+ drive_hdmi_cec_pm4, drive_pex_l2_clkreq_n_pk4,
+ drive_pex_wake_n_pl2, drive_pex_l1_clkreq_n_pk2,
+ drive_pex_l1_rst_n_pk3, drive_pex_l0_clkreq_n_pk0,
+ drive_pex_l0_rst_n_pk1, drive_pex_l2_rst_n_pk5,
+ drive_pex_l3_clkreq_n_pk6, drive_pex_l3_rst_n_pk7,
+ drive_pex_l4_clkreq_n_pl0, drive_pex_l4_rst_n_pl1,
+ drive_sata_dev_slp_pl3, drive_pex_l5_clkreq_n_pgg0,
+ drive_pex_l5_rst_n_pgg1, drive_cpu_pwr_req_1_pb1,
+ drive_cpu_pwr_req_0_pb0, drive_sdmmc1_clk_pj0,
+ drive_sdmmc1_cmd_pj1, drive_sdmmc1_dat3_pj5,
+ drive_sdmmc1_dat2_pj4, drive_sdmmc1_dat1_pj3,
+ drive_sdmmc1_dat0_pj2, drive_sdmmc3_dat3_po5,
+ drive_sdmmc3_dat2_po4, drive_sdmmc3_dat1_po3,
+ drive_sdmmc3_dat0_po2, drive_sdmmc3_cmd_po1,
+ drive_sdmmc3_clk_po0, drive_gpu_pwr_req_px0,
+ drive_spi3_miso_py1, drive_spi1_cs0_pz6,
+ drive_spi3_cs0_py3, drive_spi1_miso_pz4,
+ drive_spi3_cs1_py4, drive_gp_pwm3_px3,
+ drive_gp_pwm2_px2, drive_spi1_sck_pz3,
+ drive_spi3_sck_py0, drive_spi1_cs1_pz7,
+ drive_spi1_mosi_pz5, drive_spi3_mosi_py2,
+ drive_cv_pwr_req_px1, drive_uart2_tx_px4,
+ drive_uart2_rx_px5, drive_uart2_rts_px6,
+ drive_uart2_cts_px7, drive_uart5_rx_py6,
+ drive_uart5_tx_py5, drive_uart5_rts_py7,
+ drive_uart5_cts_pz0, drive_usb_vbus_en0_pz1,
+ drive_usb_vbus_en1_pz2, drive_ufs0_rst_pff1,
+ drive_ufs0_ref_clk_pff0 ]
+
+ - if:
+ properties:
+ compatible:
+ const: nvidia,tegra194-pinmux-aon
+ then:
+ patternProperties:
+ "^pinmux(-[a-z0-9-_]+)?$":
+ type: object
+ additionalProperties:
+ properties:
+ nvidia,pins:
+ items:
+ enum: [ can1_dout_paa0, can1_din_paa1, can0_dout_paa2,
+ can0_din_paa3, can0_stb_paa4, can0_en_paa5,
+ can0_wake_paa6, can0_err_paa7, can1_stb_pbb0,
+ can1_en_pbb1, can1_wake_pbb2, can1_err_pbb3,
+ spi2_sck_pcc0, spi2_miso_pcc1, spi2_mosi_pcc2,
+ spi2_cs0_pcc3, touch_clk_pcc4, uart3_tx_pcc5,
+ uart3_rx_pcc6, gen2_i2c_scl_pcc7, gen2_i2c_sda_pdd0,
+ gen8_i2c_scl_pdd1, gen8_i2c_sda_pdd2,
+ safe_state_pee0, vcomp_alert_pee1,
+ ao_retention_n_pee2, batt_oc_pee3, power_on_pee4,
+ pwr_i2c_scl_pee5, pwr_i2c_sda_pee6, sys_reset_n,
+ shutdown_n, pmu_int_n, soc_pwr_req, clk_32k_in,
+ # drive groups
+ drive_shutdown_n, drive_pmu_int_n,
+ drive_safe_state_pee0, drive_vcomp_alert_pee1,
+ drive_soc_pwr_req, drive_batt_oc_pee3,
+ drive_clk_32k_in, drive_power_on_pee4,
+ drive_pwr_i2c_scl_pee5, drive_pwr_i2c_sda_pee6,
+ drive_ao_retention_n_pee2, drive_touch_clk_pcc4,
+ drive_uart3_rx_pcc6, drive_uart3_tx_pcc5,
+ drive_gen8_i2c_sda_pdd2, drive_gen8_i2c_scl_pdd1,
+ drive_spi2_mosi_pcc2, drive_gen2_i2c_scl_pcc7,
+ drive_spi2_cs0_pcc3, drive_gen2_i2c_sda_pdd0,
+ drive_spi2_sck_pcc0, drive_spi2_miso_pcc1,
+ drive_can1_dout_paa0, drive_can1_din_paa1,
+ drive_can0_dout_paa2, drive_can0_din_paa3,
+ drive_can0_stb_paa4, drive_can0_en_paa5,
+ drive_can0_wake_paa6, drive_can0_err_paa7,
+ drive_can1_stb_pbb0, drive_can1_en_pbb1,
+ drive_can1_wake_pbb2, drive_can1_err_pbb3 ]
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/pinctrl-tegra.h>
+
+ pinmux@2430000 {
+ compatible = "nvidia,tegra194-pinmux";
+ reg = <0x2430000 0x17000>;
+
+ pinctrl-names = "pex_rst";
+ pinctrl-0 = <&pex_rst_c5_out_state>;
+
+ pex_rst_c5_out_state: pinmux-pex-rst-c5-out {
+ pex_rst {
+ nvidia,pins = "pex_l5_rst_n_pgg1";
+ nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.yaml
new file mode 100644
index 0000000000..63cd743a30
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.yaml
@@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra20-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra20 Pinmux Controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+ compatible:
+ const: nvidia,tegra20-pinmux
+
+ reg:
+ items:
+ - description: tri-state registers
+ - description: mux register
+ - description: pull-up/down registers
+ - description: pad control registers
+
+patternProperties:
+ "^pinmux(-[a-z0-9-_]+)?$":
+ type: object
+
+ # pin groups
+ additionalProperties:
+ $ref: nvidia,tegra-pinmux-common.yaml
+ additionalProperties: false
+ properties:
+ nvidia,pins:
+ items:
+ enum: [ ata, atb, atc, atd, ate, cdev1, cdev2, crtp, csus, dap1,
+ dap2, dap3, dap4, ddc, dta, dtb, dtc, dtd, dte, dtf, gma,
+ gmb, gmc, gmd, gme, gpu, gpu7, gpv, hdint, i2cp, irrx,
+ irtx, kbca, kbcb, kbcc, kbcd, kbce, kbcf, lcsn, ld0, ld1,
+ ld2, ld3, ld4, ld5, ld6, ld7, ld8, ld9, ld10, ld11, ld12,
+ ld13, ld14, ld15, ld16, ld17, ldc, ldi, lhp0, lhp1, lhp2,
+ lhs, lm0, lm1, lpp, lpw0, lpw1, lpw2, lsc0, lsc1, lsck,
+ lsda, lsdi, lspi, lvp0, lvp1, lvs, owc, pmc, pta, rm, sdb,
+ sdc, sdd, sdio1, slxa, slxc, slxd, slxk, spdi, spdo, spia,
+ spib, spic, spid, spie, spif, spig, spih, uaa, uab, uac,
+ uad, uca, ucb, uda,
+ # tristate groups
+ ck32, ddrc, pmca, pmcb, pmcc, pmcd, pmce, xm2c, xm2d, ls,
+ lc, ld17_0, ld19_18, ld21_20, ld23_22,
+ # drive groups
+ drive_ao1, drive_ao2, drive_at1, drive_at2, drive_cdev1,
+ drive_cdev2, drive_csus, drive_dap1, drive_dap2,
+ drive_dap3, drive_dap4, drive_dbg, drive_lcd1, drive_lcd2,
+ drive_sdmmc2, drive_sdmmc3, drive_spi, drive_uaa,
+ drive_uab, drive_uart2, drive_uart3, drive_vi1, drive_vi2,
+ drive_xm2a, drive_xm2c, drive_xm2d, drive_xm2clk,
+ drive_sdio1, drive_crt, drive_ddc, drive_gma, drive_gmb,
+ drive_gmc, drive_gmd, drive_gme, drive_owr, drive_uda ]
+
+ nvidia,function:
+ enum: [ ahb_clk, apb_clk, audio_sync, crt, dap1, dap2, dap3, dap4,
+ dap5, displaya, displayb, emc_test0_dll, emc_test1_dll, gmi,
+ gmi_int, hdmi, i2cp, i2c1, i2c2, i2c3, ide, irda, kbc, mio,
+ mipi_hs, nand, osc, owr, pcie, plla_out, pllc_out1,
+ pllm_out1, pllp_out2, pllp_out3, pllp_out4, pwm, pwr_intr,
+ pwr_on, rsvd1, rsvd2, rsvd3, rsvd4, rtck, sdio1, sdio2,
+ sdio3, sdio4, sflash, spdif, spi1, spi2, spi2_alt, spi3,
+ spi4, trace, twc, uarta, uartb, uartc, uartd, uarte, ulpi,
+ vi, vi_sensor_clk, xio ]
+
+ nvidia,pull: true
+ nvidia,tristate: true
+ nvidia,schmitt: true
+ nvidia,pull-down-strength: true
+ nvidia,pull-up-strength: true
+ nvidia,high-speed-mode: true
+ nvidia,low-power-mode: true
+ nvidia,slew-rate-rising: true
+ nvidia,slew-rate-falling: true
+
+ required:
+ - nvidia,pins
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra20-car.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ pinctrl@70000000 {
+ compatible = "nvidia,tegra20-pinmux";
+ reg = <0x70000014 0x10>, /* Tri-state registers */
+ <0x70000080 0x20>, /* Mux registers */
+ <0x700000a0 0x14>, /* Pull-up/down registers */
+ <0x70000868 0xa8>; /* Pad control registers */
+
+ pinmux {
+ atb {
+ nvidia,pins = "atb", "gma", "gme";
+ nvidia,function = "sdio4";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml
new file mode 100644
index 0000000000..e99387a6da
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra210-pinmux.yaml
@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra210-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra210 Pinmux Controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+ compatible:
+ const: nvidia,tegra210-pinmux
+
+ reg:
+ items:
+ - description: APB_MISC_GP_*_PADCTRL register (pad control)
+ - description: PINMUX_AUX_* registers (pinmux)
+
+patternProperties:
+ "^pinmux(-[a-z0-9-_]+)?$":
+ type: object
+
+ # pin groups
+ additionalProperties:
+ $ref: nvidia,tegra-pinmux-common.yaml
+ additionalProperties: false
+ properties:
+ nvidia,pins:
+ items:
+ enum: [ als_prox_int_px3, ap_ready_pv5, ap_wake_bt_ph3,
+ ap_wake_nfc_ph7, aud_mclk_pbb0, batt_bcl, bt_rst_ph4,
+ bt_wake_ap_ph5, button_home_py1, button_power_on_px5,
+ button_slide_sw_py0, button_vol_down_px7,
+ button_vol_up_px6, cam1_mclk_ps0, cam1_pwdn_ps7,
+ cam1_strobe_pt1, cam2_mclk_ps1, cam2_pwdn_pt0,
+ cam_af_en_ps5, cam_flash_en_ps6, cam_i2c_scl_ps2,
+ cam_i2c_sda_ps3, cam_rst_ps4, clk_32k_in, clk_32k_out_py5,
+ clk_req, core_pwr_req, cpu_pwr_req, dap1_din_pb1,
+ dap1_dout_pb2, dap1_fs_pb0, dap1_sclk_pb3, dap2_din_paa2,
+ dap2_dout_paa3, dap2_fs_paa0, dap2_sclk_paa1, dap4_din_pj5,
+ dap4_dout_pj6, dap4_fs_pj4, dap4_sclk_pj7, dmic1_clk_pe0,
+ dmic1_dat_pe1, dmic2_clk_pe2, dmic2_dat_pe3, dmic3_clk_pe4,
+ dmic3_dat_pe5, dp_hpd0_pcc6, dvfs_clk_pbb2, dvfs_pwm_pbb1,
+ gen1_i2c_scl_pj1, gen1_i2c_sda_pj0, gen2_i2c_scl_pj2,
+ gen2_i2c_sda_pj3, gen3_i2c_scl_pf0, gen3_i2c_sda_pf1,
+ gpio_x1_aud_pbb3, gpio_x3_aud_pbb4, gps_en_pi2,
+ gps_rst_pi3, hdmi_cec_pcc0, hdmi_int_dp_hpd_pcc1,
+ jtag_rtck, lcd_bl_en_pv1, lcd_bl_pwm_pv0, lcd_gpio1_pv3,
+ lcd_gpio2_pv4, lcd_rst_pv2, lcd_te_py2, modem_wake_ap_px0,
+ motion_int_px2, nfc_en_pi0, nfc_int_pi1, pa6, pcc7, pe6,
+ pe7, pex_l0_clkreq_n_pa1, pex_l0_rst_n_pa0,
+ pex_l1_clkreq_n_pa4, pex_l1_rst_n_pa3, pex_wake_n_pa2, ph6,
+ pk0, pk1, pk2, pk3, pk4, pk5, pk6, pk7, pl0, pl1,
+ pwr_i2c_scl_py3, pwr_i2c_sda_py4, pwr_int_n, pz0, pz1, pz2,
+ pz3, pz4, pz5, qspi_cs_n_pee1, qspi_io0_pee2,
+ qspi_io1_pee3, qspi_io2_pee4, qspi_io3_pee5, qspi_sck_pee0,
+ sata_led_active_pa5, sdmmc1_clk_pm0, sdmmc1_cmd_pm1,
+ sdmmc1_dat0_pm5, sdmmc1_dat1_pm4, sdmmc1_dat2_pm3,
+ sdmmc1_dat3_pm2, sdmmc3_clk_pp0, sdmmc3_cmd_pp1,
+ sdmmc3_dat0_pp5, sdmmc3_dat1_pp4, sdmmc3_dat2_pp3,
+ sdmmc3_dat3_pp2, shutdown, spdif_in_pcc3, spdif_out_pcc2,
+ spi1_cs0_pc3, spi1_cs1_pc4, spi1_miso_pc1, spi1_mosi_pc0,
+ spi1_sck_pc2, spi2_cs0_pb7, spi2_cs1_pdd0, spi2_miso_pb5,
+ spi2_mosi_pb4, spi2_sck_pb6, spi4_cs0_pc6, spi4_miso_pd0,
+ spi4_mosi_pc7, spi4_sck_pc5, temp_alert_px4, touch_clk_pv7,
+ touch_int_px1, touch_rst_pv6, uart1_cts_pu3, uart1_rts_pu2,
+ uart1_rx_pu1, uart1_tx_pu0, uart2_cts_pg3, uart2_rts_pg2,
+ uart2_rx_pg1, uart2_tx_pg0, uart3_cts_pd4, uart3_rts_pd3,
+ uart3_rx_pd2, uart3_tx_pd1, uart4_cts_pi7, uart4_rts_pi6,
+ uart4_rx_pi5, uart4_tx_pi4, usb_vbus_en0_pcc4,
+ usb_vbus_en1_pcc5, wifi_en_ph0, wifi_rst_ph1,
+ wifi_wake_ap_ph2,
+ # drive groups
+ drive_pa6, drive_pcc7, drive_pe6, drive_pe7, drive_ph6,
+ drive_pk0, drive_pk1, drive_pk2, drive_pk3, drive_pk4,
+ drive_pk5, drive_pk6, drive_pk7, drive_pl0, drive_pl1,
+ drive_pz0, drive_pz1, drive_pz2, drive_pz3, drive_pz4,
+ drive_pz5, drive_sdmmc1, drive_sdmmc2, drive_sdmmc3,
+ drive_sdmmc4 ]
+
+ nvidia,function:
+ enum: [ aud, bcl, blink, ccla, cec, cldvfs, clk, core, cpu, displaya,
+ displayb, dmic1, dmic2, dmic3, dp, dtv, extperiph3, i2c1,
+ i2c2, i2c3, i2cpmu, i2cvi, i2s1, i2s2, i2s3, i2s4a, i2s4b,
+ i2s5a, i2s5b, iqc0, iqc1, jtag, pe, pe0, pe1, pmi, pwm0,
+ pwm1, pwm2, pwm3, qspi, rsvd0, rsvd1, rsvd2, rsvd3, sata,
+ sdmmc1, sdmmc3, shutdown, soc, sor0, sor1, spdif, spi1, spi2,
+ spi3, spi4, sys, touch, uart, uarta, uartb, uartc, uartd,
+ usb, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, vimclk, vimclk2 ]
+
+ nvidia,pull: true
+ nvidia,tristate: true
+ nvidia,pull-down-strength: true
+ nvidia,pull-up-strength: true
+ nvidia,high-speed-mode: true
+ nvidia,enable-input: true
+ nvidia,open-drain: true
+ nvidia,lock: true
+ nvidia,drive-type: true
+ nvidia,io-hv: true
+ nvidia,slew-rate-rising: true
+ nvidia,slew-rate-falling: true
+
+ required:
+ - nvidia,pins
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/pinctrl-tegra.h>
+
+ pinmux: pinmux@70000800 {
+ compatible = "nvidia,tegra210-pinmux";
+ reg = <0x700008d4 0x02a8>, /* Pad control registers */
+ <0x70003000 0x1000>; /* Mux registers */
+
+ pinctrl-names = "boot";
+ pinctrl-0 = <&state_boot>;
+
+ state_boot: pinmux {
+ gen1_i2c_scl_pj1 {
+ nvidia,pins = "gen1_i2c_scl_pj1";
+ nvidia,function = "i2c1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml
new file mode 100644
index 0000000000..f3deda9f71
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-aon.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra234-pinmux-aon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra234 AON Pinmux Controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+$ref: nvidia,tegra234-pinmux-common.yaml
+
+properties:
+ compatible:
+ const: nvidia,tegra234-pinmux-aon
+
+patternProperties:
+ "^pinmux(-[a-z0-9-]+)?$":
+ type: object
+
+ # pin groups
+ additionalProperties:
+ properties:
+ nvidia,pins:
+ items:
+ enum: [ can0_dout_paa0, can0_din_paa1, can1_dout_paa2,
+ can1_din_paa3, can0_stb_paa4, can0_en_paa5,
+ soc_gpio49_paa6, can0_err_paa7, can1_stb_pbb0,
+ can1_en_pbb1, soc_gpio50_pbb2, can1_err_pbb3,
+ spi2_sck_pcc0, spi2_miso_pcc1, spi2_mosi_pcc2,
+ spi2_cs0_pcc3, touch_clk_pcc4, uart3_tx_pcc5,
+ uart3_rx_pcc6, gen2_i2c_scl_pcc7, gen2_i2c_sda_pdd0,
+ gen8_i2c_scl_pdd1, gen8_i2c_sda_pdd2,
+ sce_error_pee0, vcomp_alert_pee1,
+ ao_retention_n_pee2, batt_oc_pee3, power_on_pee4,
+ soc_gpio26_pee5, soc_gpio27_pee6, bootv_ctl_n_pee7,
+ hdmi_cec_pgg0,
+ # drive groups
+ drive_touch_clk_pcc4, drive_uart3_rx_pcc6,
+ drive_uart3_tx_pcc5, drive_gen8_i2c_sda_pdd2,
+ drive_gen8_i2c_scl_pdd1, drive_spi2_mosi_pcc2,
+ drive_gen2_i2c_scl_pcc7, drive_spi2_cs0_pcc3,
+ drive_gen2_i2c_sda_pdd0, drive_spi2_sck_pcc0,
+ drive_spi2_miso_pcc1, drive_can1_dout_paa2,
+ drive_can1_din_paa3, drive_can0_dout_paa0,
+ drive_can0_din_paa1, drive_can0_stb_paa4,
+ drive_can0_en_paa5, drive_soc_gpio49_paa6,
+ drive_can0_err_paa7, drive_can1_stb_pbb0,
+ drive_can1_en_pbb1, drive_soc_gpio50_pbb2,
+ drive_can1_err_pbb3, drive_sce_error_pee0,
+ drive_batt_oc_pee3, drive_bootv_ctl_n_pee7,
+ drive_power_on_pee4, drive_soc_gpio26_pee5,
+ drive_soc_gpio27_pee6, drive_ao_retention_n_pee2,
+ drive_vcomp_alert_pee1, drive_hdmi_cec_pgg0 ]
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/pinctrl-tegra.h>
+
+ pinmux@c300000 {
+ compatible = "nvidia,tegra234-pinmux-aon";
+ reg = <0xc300000 0x4000>;
+
+ pinctrl-names = "cec";
+ pinctrl-0 = <&cec_state>;
+
+ cec_state: pinmux-cec {
+ cec {
+ nvidia,pins = "hdmi_cec_pgg0";
+ nvidia,function = "gp";
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml
new file mode 100644
index 0000000000..4f9de78085
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux-common.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra234-pinmux-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra234 Pinmux Controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+ reg:
+ items:
+ - description: pinmux registers
+
+patternProperties:
+ "^pinmux(-[a-z0-9-]+)?$":
+ type: object
+
+ # pin groups
+ additionalProperties:
+ $ref: nvidia,tegra-pinmux-common.yaml
+ # We would typically use unevaluatedProperties here but that has the
+ # downside that all the properties in the common bindings become valid
+ # for all chip generations. In this case, however, we want the per-SoC
+ # bindings to be able to override which of the common properties are
+ # allowed, since not all pinmux generations support the same sets of
+ # properties. This way, the common bindings define the format of the
+ # properties but the per-SoC bindings define which of them apply to a
+ # given chip.
+ additionalProperties: false
+ properties:
+ nvidia,function:
+ enum: [ gp, uartc, i2c8, spi2, i2c2, can1, can0, rsvd0, eth0, eth2,
+ eth1, dp, eth3, i2c4, i2c7, i2c9, eqos, pe2, pe1, pe0, pe3,
+ pe4, pe5, pe6, pe7, pe8, pe9, pe10, qspi0, qspi1, qpsi,
+ sdmmc1, sce, soc, gpio, hdmi, ufs0, spi3, spi1, uartb, uarte,
+ usb, extperiph2, extperiph1, i2c3, vi0, i2c5, uarta, uartd,
+ i2c1, i2s4, i2s6, aud, spi5, touch, uartj, rsvd1, wdt, tsc,
+ dmic3, led, vi0_alt, i2s5, nv, extperiph3, extperiph4, spi4,
+ ccla, i2s1, i2s2, i2s3, i2s8, rsvd2, dmic5, dca, displayb,
+ displaya, vi1, dcb, dmic1, dmic4, i2s7, dmic2, dspk0, rsvd3,
+ tsc_alt, istctrl, vi1_alt, dspk1, igpu ]
+
+ # out of the common properties, only these are allowed for Tegra234
+ nvidia,pins: true
+ nvidia,pull: true
+ nvidia,tristate: true
+ nvidia,schmitt: true
+ nvidia,enable-input: true
+ nvidia,open-drain: true
+ nvidia,lock: true
+ nvidia,drive-type: true
+ nvidia,io-hv: true
+
+ required:
+ - nvidia,pins
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: true
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml
new file mode 100644
index 0000000000..17b865ecfc
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra234-pinmux.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra234-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra234 Pinmux Controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+$ref: nvidia,tegra234-pinmux-common.yaml
+
+properties:
+ compatible:
+ const: nvidia,tegra234-pinmux
+
+patternProperties:
+ "^pinmux(-[a-z0-9-]+)?$":
+ type: object
+
+ # pin groups
+ additionalProperties:
+ properties:
+ nvidia,pins:
+ items:
+ enum: [ dap6_sclk_pa0, dap6_dout_pa1, dap6_din_pa2,
+ dap6_fs_pa3, dap4_sclk_pa4, dap4_dout_pa5,
+ dap4_din_pa6, dap4_fs_pa7, soc_gpio08_pb0,
+ qspi0_sck_pc0, qspi0_cs_n_pc1,
+ qspi0_io0_pc2, qspi0_io1_pc3, qspi0_io2_pc4,
+ qspi0_io3_pc5, qspi1_sck_pc6, qspi1_cs_n_pc7,
+ qspi1_io0_pd0, qspi1_io1_pd1, qspi1_io2_pd2,
+ qspi1_io3_pd3, eqos_txc_pe0, eqos_td0_pe1,
+ eqos_td1_pe2, eqos_td2_pe3, eqos_td3_pe4,
+ eqos_tx_ctl_pe5, eqos_rd0_pe6, eqos_rd1_pe7,
+ eqos_rd2_pf0, eqos_rd3_pf1, eqos_rx_ctl_pf2,
+ eqos_rxc_pf3, eqos_sma_mdio_pf4, eqos_sma_mdc_pf5,
+ soc_gpio13_pg0, soc_gpio14_pg1, soc_gpio15_pg2,
+ soc_gpio16_pg3, soc_gpio17_pg4, soc_gpio18_pg5,
+ soc_gpio19_pg6, soc_gpio20_pg7, soc_gpio21_ph0,
+ soc_gpio22_ph1, soc_gpio06_ph2, uart4_tx_ph3,
+ uart4_rx_ph4, uart4_rts_ph5, uart4_cts_ph6,
+ soc_gpio41_ph7, soc_gpio42_pi0, soc_gpio43_pi1,
+ soc_gpio44_pi2, gen1_i2c_scl_pi3, gen1_i2c_sda_pi4,
+ cpu_pwr_req_pi5, soc_gpio07_pi6,
+ sdmmc1_clk_pj0, sdmmc1_cmd_pj1, sdmmc1_dat0_pj2,
+ sdmmc1_dat1_pj3, sdmmc1_dat2_pj4, sdmmc1_dat3_pj5,
+ pex_l0_clkreq_n_pk0, pex_l0_rst_n_pk1,
+ pex_l1_clkreq_n_pk2, pex_l1_rst_n_pk3,
+ pex_l2_clkreq_n_pk4, pex_l2_rst_n_pk5,
+ pex_l3_clkreq_n_pk6, pex_l3_rst_n_pk7,
+ pex_l4_clkreq_n_pl0, pex_l4_rst_n_pl1,
+ pex_wake_n_pl2, soc_gpio34_pl3, dp_aux_ch0_hpd_pm0,
+ dp_aux_ch1_hpd_pm1, dp_aux_ch2_hpd_pm2,
+ dp_aux_ch3_hpd_pm3, soc_gpio55_pm4, soc_gpio36_pm5,
+ soc_gpio53_pm6, soc_gpio38_pm7, dp_aux_ch3_n_pn0,
+ soc_gpio39_pn1, soc_gpio40_pn2, dp_aux_ch1_p_pn3,
+ dp_aux_ch1_n_pn4, dp_aux_ch2_p_pn5, dp_aux_ch2_n_pn6,
+ dp_aux_ch3_p_pn7, extperiph1_clk_pp0,
+ extperiph2_clk_pp1, cam_i2c_scl_pp2, cam_i2c_sda_pp3,
+ soc_gpio23_pp4, soc_gpio24_pp5, soc_gpio25_pp6,
+ pwr_i2c_scl_pp7, pwr_i2c_sda_pq0, soc_gpio28_pq1,
+ soc_gpio29_pq2, soc_gpio30_pq3, soc_gpio31_pq4,
+ soc_gpio32_pq5, soc_gpio33_pq6, soc_gpio35_pq7,
+ soc_gpio37_pr0, soc_gpio56_pr1, uart1_tx_pr2,
+ uart1_rx_pr3, uart1_rts_pr4, uart1_cts_pr5,
+ soc_gpio61_pw0, soc_gpio62_pw1, gpu_pwr_req_px0,
+ cv_pwr_req_px1, gp_pwm2_px2, gp_pwm3_px3, uart2_tx_px4,
+ uart2_rx_px5, uart2_rts_px6, uart2_cts_px7, spi3_sck_py0,
+ spi3_miso_py1, spi3_mosi_py2, spi3_cs0_py3,
+ spi3_cs1_py4, uart5_tx_py5, uart5_rx_py6,
+ uart5_rts_py7, uart5_cts_pz0, usb_vbus_en0_pz1,
+ usb_vbus_en1_pz2, spi1_sck_pz3, spi1_miso_pz4,
+ spi1_mosi_pz5, spi1_cs0_pz6, spi1_cs1_pz7,
+ spi5_sck_pac0, spi5_miso_pac1, spi5_mosi_pac2,
+ spi5_cs0_pac3, soc_gpio57_pac4, soc_gpio58_pac5,
+ soc_gpio59_pac6, soc_gpio60_pac7, soc_gpio45_pad0,
+ soc_gpio46_pad1, soc_gpio47_pad2, soc_gpio48_pad3,
+ ufs0_ref_clk_pae0, ufs0_rst_n_pae1,
+ pex_l5_clkreq_n_paf0, pex_l5_rst_n_paf1,
+ pex_l6_clkreq_n_paf2, pex_l6_rst_n_paf3,
+ pex_l7_clkreq_n_pag0, pex_l7_rst_n_pag1,
+ pex_l8_clkreq_n_pag2, pex_l8_rst_n_pag3,
+ pex_l9_clkreq_n_pag4, pex_l9_rst_n_pag5,
+ pex_l10_clkreq_n_pag6, pex_l10_rst_n_pag7,
+ sdmmc1_comp, eqos_comp, qspi_comp,
+ # drive groups
+ drive_soc_gpio08_pb0, drive_soc_gpio36_pm5,
+ drive_soc_gpio53_pm6, drive_soc_gpio55_pm4,
+ drive_soc_gpio38_pm7, drive_soc_gpio39_pn1,
+ drive_soc_gpio40_pn2, drive_dp_aux_ch0_hpd_pm0,
+ drive_dp_aux_ch1_hpd_pm1, drive_dp_aux_ch2_hpd_pm2,
+ drive_dp_aux_ch3_hpd_pm3, drive_dp_aux_ch1_p_pn3,
+ drive_dp_aux_ch1_n_pn4, drive_dp_aux_ch2_p_pn5,
+ drive_dp_aux_ch2_n_pn6, drive_dp_aux_ch3_p_pn7,
+ drive_dp_aux_ch3_n_pn0, drive_pex_l2_clkreq_n_pk4,
+ drive_pex_wake_n_pl2, drive_pex_l1_clkreq_n_pk2,
+ drive_pex_l1_rst_n_pk3, drive_pex_l0_clkreq_n_pk0,
+ drive_pex_l0_rst_n_pk1, drive_pex_l2_rst_n_pk5,
+ drive_pex_l3_clkreq_n_pk6, drive_pex_l3_rst_n_pk7,
+ drive_pex_l4_clkreq_n_pl0, drive_pex_l4_rst_n_pl1,
+ drive_soc_gpio34_pl3, drive_pex_l5_clkreq_n_paf0,
+ drive_pex_l5_rst_n_paf1, drive_pex_l6_clkreq_n_paf2,
+ drive_pex_l6_rst_n_paf3, drive_pex_l10_clkreq_n_pag6,
+ drive_pex_l10_rst_n_pag7, drive_pex_l7_clkreq_n_pag0,
+ drive_pex_l7_rst_n_pag1, drive_pex_l8_clkreq_n_pag2,
+ drive_pex_l8_rst_n_pag3, drive_pex_l9_clkreq_n_pag4,
+ drive_pex_l9_rst_n_pag5, drive_sdmmc1_clk_pj0,
+ drive_sdmmc1_cmd_pj1, drive_sdmmc1_dat3_pj5,
+ drive_sdmmc1_dat2_pj4, drive_sdmmc1_dat1_pj3,
+ drive_sdmmc1_dat0_pj2 ]
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/pinctrl-tegra.h>
+
+ pinmux@2430000 {
+ compatible = "nvidia,tegra234-pinmux";
+ reg = <0x2430000 0x17000>;
+
+ pinctrl-names = "pex_rst";
+ pinctrl-0 = <&pex_rst_c5_out_state>;
+
+ pex_rst_c5_out_state: pinmux-pex-rst-c5-out {
+ pexrst {
+ nvidia,pins = "pex_l5_rst_n_paf1";
+ nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,io-hv = <TEGRA_PIN_ENABLE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.yaml
new file mode 100644
index 0000000000..36c8f3301a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.yaml
@@ -0,0 +1,174 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra30-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra30 pinmux Controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jon Hunter <jonathanh@nvidia.com>
+
+properties:
+ compatible:
+ const: nvidia,tegra30-pinmux
+
+ reg:
+ items:
+ - description: pad control registers
+ - description: mux registers
+
+patternProperties:
+ "^pinmux(-[a-z0-9-_]+)?$":
+ type: object
+
+ # pin groups
+ additionalProperties:
+ $ref: nvidia,tegra-pinmux-common.yaml
+ additionalProperties: false
+ properties:
+ nvidia,pins:
+ items:
+ enum: [ clk_32k_out_pa0, uart3_cts_n_pa1, dap2_fs_pa2,
+ dap2_sclk_pa3, dap2_din_pa4, dap2_dout_pa5, sdmmc3_clk_pa6,
+ sdmmc3_cmd_pa7, gmi_a17_pb0, gmi_a18_pb1, lcd_pwr0_pb2,
+ lcd_pclk_pb3, sdmmc3_dat3_pb4, sdmmc3_dat2_pb5,
+ sdmmc3_dat1_pb6, sdmmc3_dat0_pb7, uart3_rts_n_pc0,
+ lcd_pwr1_pc1, uart2_txd_pc2, uart2_rxd_pc3,
+ gen1_i2c_scl_pc4, gen1_i2c_sda_pc5, lcd_pwr2_pc6,
+ gmi_wp_n_pc7, sdmmc3_dat5_pd0, sdmmc3_dat4_pd1,
+ lcd_dc1_pd2, sdmmc3_dat6_pd3, sdmmc3_dat7_pd4, vi_d1_pd5,
+ vi_vsync_pd6, vi_hsync_pd7, lcd_d0_pe0, lcd_d1_pe1,
+ lcd_d2_pe2, lcd_d3_pe3, lcd_d4_pe4, lcd_d5_pe5, lcd_d6_pe6,
+ lcd_d7_pe7, lcd_d8_pf0, lcd_d9_pf1, lcd_d10_pf2,
+ lcd_d11_pf3, lcd_d12_pf4, lcd_d13_pf5, lcd_d14_pf6,
+ lcd_d15_pf7, gmi_ad0_pg0, gmi_ad1_pg1, gmi_ad2_pg2,
+ gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5, gmi_ad6_pg6,
+ gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2,
+ gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6,
+ gmi_ad15_ph7, gmi_wr_n_pi0, gmi_oe_n_pi1, gmi_dqs_pi2,
+ gmi_cs6_n_pi3, gmi_rst_n_pi4, gmi_iordy_pi5, gmi_cs7_n_pi6,
+ gmi_wait_pi7, gmi_cs0_n_pj0, lcd_de_pj1, gmi_cs1_n_pj2,
+ lcd_hsync_pj3, lcd_vsync_pj4, uart2_cts_n_pj5,
+ uart2_rts_n_pj6, gmi_a16_pj7, gmi_adv_n_pk0, gmi_clk_pk1,
+ gmi_cs4_n_pk2, gmi_cs2_n_pk3, gmi_cs3_n_pk4, spdif_out_pk5,
+ spdif_in_pk6, gmi_a19_pk7, vi_d2_pl0, vi_d3_pl1, vi_d4_pl2,
+ vi_d5_pl3, vi_d6_pl4, vi_d7_pl5, vi_d8_pl6, vi_d9_pl7,
+ lcd_d16_pm0, lcd_d17_pm1, lcd_d18_pm2, lcd_d19_pm3,
+ lcd_d20_pm4, lcd_d21_pm5, lcd_d22_pm6, lcd_d23_pm7,
+ dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2, dap1_sclk_pn3,
+ lcd_cs0_n_pn4, lcd_sdout_pn5, lcd_dc0_pn6, hdmi_int_pn7,
+ ulpi_data7_po0, ulpi_data0_po1, ulpi_data1_po2,
+ ulpi_data2_po3, ulpi_data3_po4, ulpi_data4_po5,
+ ulpi_data5_po6, ulpi_data6_po7, dap3_fs_pp0, dap3_din_pp1,
+ dap3_dout_pp2, dap3_sclk_pp3, dap4_fs_pp4, dap4_din_pp5,
+ dap4_dout_pp6, dap4_sclk_pp7, kb_col0_pq0, kb_col1_pq1,
+ kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5,
+ kb_col6_pq6, kb_col7_pq7, kb_row0_pr0, kb_row1_pr1,
+ kb_row2_pr2, kb_row3_pr3, kb_row4_pr4, kb_row5_pr5,
+ kb_row6_pr6, kb_row7_pr7, kb_row8_ps0, kb_row9_ps1,
+ kb_row10_ps2, kb_row11_ps3, kb_row12_ps4, kb_row13_ps5,
+ kb_row14_ps6, kb_row15_ps7, vi_pclk_pt0, vi_mclk_pt1,
+ vi_d10_pt2, vi_d11_pt3, vi_d0_pt4, gen2_i2c_scl_pt5,
+ gen2_i2c_sda_pt6, sdmmc4_cmd_pt7, pu0, pu1, pu2, pu3, pu4,
+ pu5, pu6, jtag_rtck_pu7, pv0, pv1, pv2, pv3, ddc_scl_pv4,
+ ddc_sda_pv5, crt_hsync_pv6, crt_vsync_pv7, lcd_cs1_n_pw0,
+ lcd_m1_pw1, spi2_cs1_n_pw2, spi2_cs2_n_pw3, clk1_out_pw4,
+ clk2_out_pw5, uart3_txd_pw6, uart3_rxd_pw7, spi2_mosi_px0,
+ spi2_miso_px1, spi2_sck_px2, spi2_cs0_n_px3, spi1_mosi_px4,
+ spi1_sck_px5, spi1_cs0_n_px6, spi1_miso_px7, ulpi_clk_py0,
+ ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3, sdmmc1_dat3_py4,
+ sdmmc1_dat2_py5, sdmmc1_dat1_py6, sdmmc1_dat0_py7,
+ sdmmc1_clk_pz0, sdmmc1_cmd_pz1, lcd_sdin_pz2, lcd_wr_n_pz3,
+ lcd_sck_pz4, sys_clk_req_pz5, pwr_i2c_scl_pz6,
+ pwr_i2c_sda_pz7, sdmmc4_dat0_paa0, sdmmc4_dat1_paa1,
+ sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, sdmmc4_dat4_paa4,
+ sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, sdmmc4_dat7_paa7, pbb0,
+ cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6,
+ pbb7, cam_mclk_pcc0, pcc1, pcc2, sdmmc4_rst_n_pcc3,
+ sdmmc4_clk_pcc4, clk2_req_pcc5, pex_l2_rst_n_pcc6,
+ pex_l2_clkreq_n_pcc7, pex_l0_prsnt_n_pdd0,
+ pex_l0_rst_n_pdd1, pex_l0_clkreq_n_pdd2, pex_wake_n_pdd3,
+ pex_l1_prsnt_n_pdd4, pex_l1_rst_n_pdd5,
+ pex_l1_clkreq_n_pdd6, pex_l2_prsnt_n_pdd7, clk3_out_pee0,
+ clk3_req_pee1, clk1_req_pee2, hdmi_cec_pee3, clk_32k_in,
+ core_pwr_req, cpu_pwr_req, owr, pwr_int_n,
+ # drive groups
+ drive_ao1, drive_ao2, drive_at1, drive_at2, drive_at3,
+ drive_at4, drive_at5, drive_cdev1, drive_cdev2, drive_cec,
+ drive_crt, drive_csus, drive_dap1, drive_dap2, drive_dap3,
+ drive_dap4, drive_dbg, drive_ddc, drive_dev3, drive_gma,
+ drive_gmb, drive_gmc, drive_gmd, drive_gme, drive_gmf,
+ drive_gmg, drive_gmh, drive_gpv, drive_lcd1, drive_lcd2,
+ drive_owr, drive_sdio1, drive_sdio2, drive_sdio3,
+ drive_spi, drive_uaa, drive_uab, drive_uart2, drive_uart3,
+ drive_uda, drive_vi1 ]
+
+ nvidia,function:
+ enum: [ blink, cec, clk_12m_out, clk_32k_in, core_pwr_req,
+ cpu_pwr_req, crt, dap, ddr, dev3, displaya, displayb, dtv,
+ extperiph1, extperiph2, extperiph3, gmi, gmi_alt, hda, hdcp,
+ hdmi, hsi, i2c1, i2c2, i2c3, i2c4, i2cpwr, i2s0, i2s1, i2s2,
+ i2s3, i2s4, invalid, kbc, mio, nand, nand_alt, owr, pcie,
+ pwm0, pwm1, pwm2, pwm3, pwr_int_n, rsvd1, rsvd2, rsvd3,
+ rsvd4, rtck, sata, sdmmc1, sdmmc2, sdmmc3, sdmmc4, spdif,
+ spi1, spi2, spi2_alt, spi3, spi4, spi5, spi6, sysclk, test,
+ trace, uarta, uartb, uartc, uartd, uarte, ulpi, vgp1, vgp2,
+ vgp3, vgp4, vgp5, vgp6, vi, vi_alt1, vi_alt2, vi_alt3 ]
+
+ nvidia,pull: true
+ nvidia,tristate: true
+ nvidia,schmitt: true
+ nvidia,pull-down-strength: true
+ nvidia,pull-up-strength: true
+ nvidia,high-speed-mode: true
+ nvidia,low-power-mode: true
+ nvidia,enable-input: true
+ nvidia,open-drain: true
+ nvidia,lock: true
+ nvidia,io-reset: true
+ nvidia,slew-rate-rising: true
+ nvidia,slew-rate-falling: true
+
+ required:
+ - nvidia,pins
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ pinctrl@70000000 {
+ compatible = "nvidia,tegra30-pinmux";
+ reg = <0x70000868 0x0d0>, /* Pad control registers */
+ <0x70003000 0x3e0>; /* Mux registers */
+
+ pinmux {
+ sdmmc4_clk_pcc4 {
+ nvidia,pins = "sdmmc4_clk_pcc4",
+ "sdmmc4_rst_n_pcc3";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <0>;
+ nvidia,tristate = <0>;
+ };
+
+ sdmmc4_dat0_paa0 {
+ nvidia,pins = "sdmmc4_dat0_paa0",
+ "sdmmc4_dat1_paa1",
+ "sdmmc4_dat2_paa2",
+ "sdmmc4_dat3_paa3",
+ "sdmmc4_dat4_paa4",
+ "sdmmc4_dat5_paa5",
+ "sdmmc4_dat6_paa6",
+ "sdmmc4_dat7_paa7";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <2>;
+ nvidia,tristate = <0>;
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/nxp,lpc1850-scu.txt b/Documentation/devicetree/bindings/pinctrl/nxp,lpc1850-scu.txt
new file mode 100644
index 0000000000..bd8b0c69fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nxp,lpc1850-scu.txt
@@ -0,0 +1,71 @@
+NXP LPC18xx/43xx SCU pin controller Device Tree Bindings
+--------------------------------------------------------
+
+Required properties:
+- compatible : Should be "nxp,lpc1850-scu"
+- reg : Address and length of the register set for the device
+- clocks : Clock specifier (see clock bindings for details)
+
+The lpc1850-scu driver uses the generic pin multiplexing and generic pin
+configuration documented in pinctrl-bindings.txt.
+
+The following generic nodes are supported:
+ - function
+ - pins
+ - bias-disable
+ - bias-pull-up
+ - bias-pull-down
+ - drive-strength
+ - input-enable
+ - input-disable
+ - input-schmitt-enable
+ - input-schmitt-disable
+ - slew-rate
+
+NXP specific properties:
+ - nxp,gpio-pin-interrupt : Assign pin to gpio pin interrupt controller
+ irq number 0 to 7. See example below.
+
+Not all pins support all properties so either refer to the NXP 1850/4350
+user manual or the pin table in the pinctrl-lpc18xx driver for supported
+pin properties.
+
+Example:
+pinctrl: pinctrl@40086000 {
+ compatible = "nxp,lpc1850-scu";
+ reg = <0x40086000 0x1000>;
+ clocks = <&ccu1 CLK_CPU_SCU>;
+
+ i2c0_pins: i2c0-pins {
+ i2c0_pins_cfg {
+ pins = "i2c0_scl", "i2c0_sda";
+ function = "i2c0";
+ input-enable;
+ };
+ };
+
+ uart0_pins: uart0-pins {
+ uart0_rx_cfg {
+ pins = "pf_11";
+ function = "uart0";
+ bias-disable;
+ input-enable;
+ };
+
+ uart0_tx_cfg {
+ pins = "pf_10";
+ function = "uart0";
+ bias-disable;
+ };
+ };
+
+ gpio_joystick_pins: gpio-joystick-pins {
+ gpio_joystick_1_cfg {
+ pins = "p9_0";
+ function = "gpio";
+ nxp,gpio-pin-interrupt = <0>;
+ input-enable;
+ bias-disable;
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml
new file mode 100644
index 0000000000..d49aafd8c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2022 NXP
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nxp,s32g2-siul2-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP S32G2 pin controller
+
+maintainers:
+ - Ghennadi Procopciuc <Ghennadi.Procopciuc@oss.nxp.com>
+ - Chester Lin <clin@suse.com>
+
+description: |
+ S32G2 pinmux is implemented in SIUL2 (System Integration Unit Lite2),
+ whose memory map is split into two regions:
+ SIUL2_0 @ 0x4009c000
+ SIUL2_1 @ 0x44010000
+
+ Every SIUL2 region has multiple register types, and here only MSCR and
+ IMCR registers need to be revealed for kernel to configure pinmux.
+
+ Please note that some register indexes are reserved in S32G2, such as
+ MSCR102-MSCR111, MSCR123-MSCR143, IMCR84-IMCR118 and IMCR398-IMCR429.
+
+properties:
+ compatible:
+ enum:
+ - nxp,s32g2-siul2-pinctrl
+
+ reg:
+ description: |
+ A list of MSCR/IMCR register regions to be reserved.
+ - MSCR (Multiplexed Signal Configuration Register)
+ An MSCR register can configure the associated pin as either a GPIO pin
+ or a function output pin depends on the selected signal source.
+ - IMCR (Input Multiplexed Signal Configuration Register)
+ An IMCR register can configure the associated pin as function input
+ pin depends on the selected signal source.
+ items:
+ - description: MSCR registers group 0 in SIUL2_0
+ - description: MSCR registers group 1 in SIUL2_1
+ - description: MSCR registers group 2 in SIUL2_1
+ - description: IMCR registers group 0 in SIUL2_0
+ - description: IMCR registers group 1 in SIUL2_1
+ - description: IMCR registers group 2 in SIUL2_1
+
+patternProperties:
+ '-pins$':
+ type: object
+ additionalProperties: false
+
+ patternProperties:
+ '-grp[0-9]$':
+ type: object
+ allOf:
+ - $ref: pinmux-node.yaml#
+ - $ref: pincfg-node.yaml#
+ description: |
+ Pinctrl node's client devices specify pin muxes using subnodes,
+ which in turn use the standard properties below.
+
+ properties:
+ bias-disable: true
+ bias-high-impedance: true
+ bias-pull-up: true
+ bias-pull-down: true
+ drive-open-drain: true
+ input-enable: true
+ output-enable: true
+
+ pinmux:
+ description: |
+ An integer array for representing pinmux configurations of
+ a device. Each integer consists of a PIN_ID and a 4-bit
+ selected signal source(SSS) as IOMUX setting, which is
+ calculated as: pinmux = (PIN_ID << 4 | SSS)
+
+ slew-rate:
+ description: Supported slew rate based on Fmax values (MHz)
+ enum: [83, 133, 150, 166, 208]
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ pinctrl@4009c240 {
+ compatible = "nxp,s32g2-siul2-pinctrl";
+
+ /* MSCR0-MSCR101 registers on siul2_0 */
+ reg = <0x4009c240 0x198>,
+ /* MSCR112-MSCR122 registers on siul2_1 */
+ <0x44010400 0x2c>,
+ /* MSCR144-MSCR190 registers on siul2_1 */
+ <0x44010480 0xbc>,
+ /* IMCR0-IMCR83 registers on siul2_0 */
+ <0x4009ca40 0x150>,
+ /* IMCR119-IMCR397 registers on siul2_1 */
+ <0x44010c1c 0x45c>,
+ /* IMCR430-IMCR495 registers on siul2_1 */
+ <0x440110f8 0x108>;
+
+ llce-can0-pins {
+ llce-can0-grp0 {
+ pinmux = <0x2b0>;
+ input-enable;
+ slew-rate = <208>;
+ };
+
+ llce-can0-grp1 {
+ pinmux = <0x2c2>;
+ output-enable;
+ slew-rate = <208>;
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
new file mode 100644
index 0000000000..be81ed22a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/pincfg-node.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic Pin Configuration Node
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+ Many data items that are represented in a pin configuration node are common
+ and generic. Pin control bindings should use the properties defined below
+ where they are applicable; not all of these properties are relevant or useful
+ for all hardware or binding structures. Each individual binding document
+ should state which of these generic properties, if any, are used, and the
+ structure of the DT nodes that contain these properties.
+
+properties:
+ bias-disable:
+ type: boolean
+ description: disable any pin bias
+
+ bias-high-impedance:
+ type: boolean
+ description: high impedance mode ("third-state", "floating")
+
+ bias-bus-hold:
+ type: boolean
+ description: latch weakly
+
+ bias-pull-up:
+ oneOf:
+ - type: boolean
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ description: pull up the pin. Takes as optional argument on hardware
+ supporting it the pull strength in Ohm.
+
+ bias-pull-down:
+ oneOf:
+ - type: boolean
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ description: pull down the pin. Takes as optional argument on hardware
+ supporting it the pull strength in Ohm.
+
+ bias-pull-pin-default:
+ oneOf:
+ - type: boolean
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ description: use pin-default pull state. Takes as optional argument on
+ hardware supporting it the pull strength in Ohm.
+
+ drive-push-pull:
+ oneOf:
+ - type: boolean
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1 ]
+ deprecated: true
+ description: drive actively high and low
+
+ drive-open-drain:
+ oneOf:
+ - type: boolean
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ const: 1 # No known cases of 0
+ deprecated: true
+ description: drive with open drain
+
+ drive-open-source:
+ type: boolean
+ description: drive with open source
+
+ drive-strength:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: sink or source at most X mA
+
+ drive-strength-microamp:
+ description: sink or source at most X uA
+
+ input-enable:
+ type: boolean
+ description: enable input on pin (no effect on output, such as
+ enabling an input buffer)
+
+ input-disable:
+ type: boolean
+ description: disable input on pin (no effect on output, such as
+ disabling an input buffer)
+
+ input-schmitt-enable:
+ type: boolean
+ description: enable schmitt-trigger mode
+
+ input-schmitt-disable:
+ type: boolean
+ description: disable schmitt-trigger mode
+
+ input-debounce:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Takes the debounce time in usec as argument or 0 to disable
+ debouncing
+
+ power-source:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: select between different power supplies
+
+ low-power-enable:
+ type: boolean
+ description: enable low power mode
+
+ low-power-disable:
+ type: boolean
+ description: disable low power mode
+
+ output-disable:
+ type: boolean
+ description: disable output on a pin (such as disable an output buffer)
+
+ output-enable:
+ type: boolean
+ description: enable output on a pin without actively driving it
+ (such as enabling an output buffer)
+
+ output-impedance-ohms:
+ description: set the output impedance of a pin to at most X ohms
+
+ output-low:
+ type: boolean
+ description: set the pin to output mode with low level
+
+ output-high:
+ type: boolean
+ description: set the pin to output mode with high level
+
+ sleep-hardware-state:
+ type: boolean
+ description: indicate this is sleep related state which will be
+ programmed into the registers for the sleep state.
+
+ slew-rate:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: set the slew rate
+
+ skew-delay:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ this affects the expected clock skew on input pins
+ and the delay before latching a value to an output
+ pin. Typically indicates how many double-inverters are
+ used to delay the signal.
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
new file mode 100644
index 0000000000..6904072d39
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
@@ -0,0 +1,109 @@
+== Introduction ==
+
+Hardware modules that control pin multiplexing or configuration parameters
+such as pull-up/down, tri-state, drive-strength etc are designated as pin
+controllers. Each pin controller must be represented as a node in device tree,
+just like any other hardware module.
+
+Hardware modules whose signals are affected by pin configuration are
+designated client devices. Again, each client device must be represented as a
+node in device tree, just like any other hardware module.
+
+For a client device to operate correctly, certain pin controllers must
+set up certain specific pin configurations. Some client devices need a
+single static pin configuration, e.g. set up during initialization. Others
+need to reconfigure pins at run-time, for example to tri-state pins when the
+device is inactive. Hence, each client device can define a set of named
+states. The number and names of those states is defined by the client device's
+own binding.
+
+The common pinctrl bindings defined in this file provide an infrastructure
+for client device device tree nodes to map those state names to the pin
+configuration used by those states.
+
+Note that pin controllers themselves may also be client devices of themselves.
+For example, a pin controller may set up its own "active" state when the
+driver loads. This would allow representing a board's static pin configuration
+in a single place, rather than splitting it across multiple client device
+nodes. The decision to do this or not somewhat rests with the author of
+individual board device tree files, and any requirements imposed by the
+bindings for the individual client devices in use by that board, i.e. whether
+they require certain specific named states for dynamic pin configuration.
+
+== Pinctrl client devices ==
+
+For each client device individually, every pin state is assigned an integer
+ID. These numbers start at 0, and are contiguous. For each state ID, a unique
+property exists to define the pin configuration. Each state may also be
+assigned a name. When names are used, another property exists to map from
+those names to the integer IDs.
+
+Each client device's own binding determines the set of states that must be
+defined in its device tree node, and whether to define the set of state
+IDs that must be provided, or whether to define the set of state names that
+must be provided.
+
+Required properties:
+pinctrl-0: List of phandles, each pointing at a pin configuration
+ node. These referenced pin configuration nodes must be child
+ nodes of the pin controller that they configure. Multiple
+ entries may exist in this list so that multiple pin
+ controllers may be configured, or so that a state may be built
+ from multiple nodes for a single pin controller, each
+ contributing part of the overall configuration. See the next
+ section of this document for details of the format of these
+ pin configuration nodes.
+
+ In some cases, it may be useful to define a state, but for it
+ to be empty. This may be required when a common IP block is
+ used in an SoC either without a pin controller, or where the
+ pin controller does not affect the HW module in question. If
+ the binding for that IP block requires certain pin states to
+ exist, they must still be defined, but may be left empty.
+
+Optional properties:
+pinctrl-1: List of phandles, each pointing at a pin configuration
+ node within a pin controller.
+...
+pinctrl-n: List of phandles, each pointing at a pin configuration
+ node within a pin controller.
+pinctrl-names: The list of names to assign states. List entry 0 defines the
+ name for integer state ID 0, list entry 1 for state ID 1, and
+ so on.
+
+For example:
+
+ /* For a client device requiring named states */
+ device {
+ pinctrl-names = "active", "idle";
+ pinctrl-0 = <&state_0_node_a>;
+ pinctrl-1 = <&state_1_node_a>, <&state_1_node_b>;
+ };
+
+ /* For the same device if using state IDs */
+ device {
+ pinctrl-0 = <&state_0_node_a>;
+ pinctrl-1 = <&state_1_node_a>, <&state_1_node_b>;
+ };
+
+ /*
+ * For an IP block whose binding supports pin configuration,
+ * but in use on an SoC that doesn't have any pin control hardware
+ */
+ device {
+ pinctrl-names = "active", "idle";
+ pinctrl-0 = <>;
+ pinctrl-1 = <>;
+ };
+
+== Pin controller devices ==
+
+See pinctrl.yaml
+
+== Generic pin multiplexing node content ==
+
+See pinmux-node.yaml
+
+== Generic pin configuration node content ==
+
+See pincfg-node.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt
new file mode 100644
index 0000000000..28fbca1800
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt
@@ -0,0 +1,127 @@
+Pincontrol driver for MAX77620 Power management IC from Maxim Semiconductor.
+
+Device has 8 GPIO pins which can be configured as GPIO as well as the
+special IO functions.
+
+Please refer file <devicetree/bindings/pinctrl/pinctrl-bindings.txt>
+for details of the common pinctrl bindings used by client devices,
+including the meaning of the phrase "pin configuration node".
+
+Optional Pinmux properties:
+--------------------------
+Following properties are required if default setting of pins are required
+at boot.
+- pinctrl-names: A pinctrl state named per <pinctrl-bindings.txt>.
+- pinctrl[0...n]: Properties to contain the phandle for pinctrl states per
+ <pinctrl-bindings.txt>.
+
+The pin configurations are defined as child of the pinctrl states node. Each
+sub-node have following properties:
+
+Required properties:
+------------------
+- pins: List of pins. Valid values of pins properties are:
+ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7.
+
+Optional properties:
+-------------------
+Following are optional properties defined as pinmux DT binding document
+<pinctrl-bindings.txt>. Absence of properties will leave the configuration
+on default.
+ function,
+ drive-push-pull,
+ drive-open-drain,
+ bias-pull-up,
+ bias-pull-down.
+
+Valid values for function properties are:
+ gpio, lpm-control-in, fps-out, 32k-out, sd0-dvs-in, sd1-dvs-in,
+ reference-out
+
+There are also customised properties for the GPIO1, GPIO2 and GPIO3. These
+customised properties are required to configure FPS configuration parameters
+of these GPIOs. Please refer <devicetree/bindings/mfd/max77620.txt> for more
+detail of Flexible Power Sequence (FPS).
+
+- maxim,active-fps-source: FPS source for the GPIOs to get
+ enabled/disabled when system is in
+ active state. Valid values are:
+ - MAX77620_FPS_SRC_0,
+ FPS source is FPS0.
+ - MAX77620_FPS_SRC_1,
+ FPS source is FPS1
+ - MAX77620_FPS_SRC_2 and
+ FPS source is FPS2
+ - MAX77620_FPS_SRC_NONE.
+ GPIO is not controlled
+ by FPS events and it gets
+ enabled/disabled by register
+ access.
+ Absence of this property will leave
+ the FPS configuration register for that
+ GPIO to default configuration.
+
+- maxim,active-fps-power-up-slot: Sequencing event slot number on which
+ the GPIO get enabled when
+ master FPS input event set to HIGH.
+ Valid values are 0 to 7.
+ This is applicable if FPS source is
+ selected as FPS0, FPS1 or FPS2.
+
+- maxim,active-fps-power-down-slot: Sequencing event slot number on which
+ the GPIO get disabled when master
+ FPS input event set to LOW.
+ Valid values are 0 to 7.
+ This is applicable if FPS source is
+ selected as FPS0, FPS1 or FPS2.
+
+- maxim,suspend-fps-source: This is same as property
+ "maxim,active-fps-source" but value
+ get configured when system enters in
+ to suspend state.
+
+- maxim,suspend-fps-power-up-slot: This is same as property
+ "maxim,active-fps-power-up-slot" but
+ this value get configured into FPS
+ configuration register when system
+ enters into suspend.
+ This is applicable if suspend state
+ FPS source is selected as FPS0, FPS1 or
+
+- maxim,suspend-fps-power-down-slot: This is same as property
+ "maxim,active-fps-power-down-slot" but
+ this value get configured into FPS
+ configuration register when system
+ enters into suspend.
+ This is applicable if suspend state
+ FPS source is selected as FPS0, FPS1 or
+ FPS2.
+
+Example:
+--------
+#include <dt-bindings/mfd/max77620.h>
+...
+max77620@3c {
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&spmic_default>;
+
+ spmic_default: pinmux@0 {
+ pin_gpio0 {
+ pins = "gpio0";
+ function = "gpio";
+ };
+
+ pin_gpio1 {
+ pins = "gpio1";
+ function = "fps-out";
+ maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+ };
+
+ pin_gpio2 {
+ pins = "gpio2";
+ function = "fps-out";
+ maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
new file mode 100644
index 0000000000..2fa5edac7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
@@ -0,0 +1,148 @@
+Microchip MCP2308/MCP23S08/MCP23017/MCP23S17 driver for
+8-/16-bit I/O expander with serial interface (I2C/SPI)
+
+Required properties:
+- compatible : Should be
+ - "mcp,mcp23s08" (DEPRECATED) for 8 GPIO SPI version
+ - "mcp,mcp23s17" (DEPRECATED) for 16 GPIO SPI version
+ - "mcp,mcp23008" (DEPRECATED) for 8 GPIO I2C version or
+ - "mcp,mcp23017" (DEPRECATED) for 16 GPIO I2C version of the chip
+
+ - "microchip,mcp23s08" for 8 GPIO SPI version
+ - "microchip,mcp23s17" for 16 GPIO SPI version
+ - "microchip,mcp23s18" for 16 GPIO SPI version
+ - "microchip,mcp23008" for 8 GPIO I2C version or
+ - "microchip,mcp23017" for 16 GPIO I2C version of the chip
+ - "microchip,mcp23018" for 16 GPIO I2C version
+ NOTE: Do not use the old mcp prefix any more. It is deprecated and will be
+ removed.
+- #gpio-cells : Should be two.
+ - first cell is the pin number
+ - second cell is used to specify flags as described in
+ 'Documentation/devicetree/bindings/gpio/gpio.txt'. Allowed values defined by
+ 'include/dt-bindings/gpio/gpio.h' (e.g. GPIO_ACTIVE_LOW).
+- gpio-controller : Marks the device node as a GPIO controller.
+- reg : For an address on its bus. I2C uses this a the I2C address of the chip.
+ SPI uses this to specify the chipselect line which the chip is
+ connected to. The driver and the SPI variant of the chip support
+ multiple chips on the same chipselect. Have a look at
+ microchip,spi-present-mask below.
+
+Required device specific properties (only for SPI chips):
+- mcp,spi-present-mask (DEPRECATED)
+- microchip,spi-present-mask : This is a present flag, that makes only sense for SPI
+ chips - as the name suggests. Multiple SPI chips can share the same
+ SPI chipselect. Set a bit in bit0-7 in this mask to 1 if there is a
+ chip connected with the corresponding spi address set. For example if
+ you have a chip with address 3 connected, you have to set bit3 to 1,
+ which is 0x08. mcp23s08 chip variant only supports bits 0-3. It is not
+ possible to mix mcp23s08 and mcp23s17 on the same chipselect. Set at
+ least one bit to 1 for SPI chips.
+ NOTE: Do not use the old mcp prefix any more. It is deprecated and will be
+ removed.
+- spi-max-frequency = The maximum frequency this chip is able to handle
+
+Optional properties:
+- #interrupt-cells : Should be two.
+ - first cell is the pin number
+ - second cell is used to specify flags.
+- interrupt-controller: Marks the device node as a interrupt controller.
+- drive-open-drain: Sets the ODR flag in the IOCON register. This configures
+ the IRQ output as open drain active low.
+- reset-gpios: Corresponds to the active-low RESET# pin for the chip
+
+Optional device specific properties:
+- microchip,irq-mirror: Sets the mirror flag in the IOCON register. Devices
+ with two interrupt outputs (these are the devices ending with 17 and
+ those that have 16 IOs) have two IO banks: IO 0-7 form bank 1 and
+ IO 8-15 are bank 2. These chips have two different interrupt outputs:
+ One for bank 1 and another for bank 2. If irq-mirror is set, both
+ interrupts are generated regardless of the bank that an input change
+ occurred on. If it is not set, the interrupt are only generated for the
+ bank they belong to.
+ On devices with only one interrupt output this property is useless.
+- microchip,irq-active-high: Sets the INTPOL flag in the IOCON register. This
+ configures the IRQ output polarity as active high.
+
+Example I2C (with interrupt):
+gpiom1: gpio@20 {
+ compatible = "microchip,mcp23017";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x20>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells=<2>;
+ microchip,irq-mirror;
+};
+
+Example SPI:
+gpiom1: gpio@0 {
+ compatible = "microchip,mcp23s17";
+ gpio-controller;
+ #gpio-cells = <2>;
+ microchip,spi-present-mask = <0x01>;
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+};
+
+Pull-up configuration
+=====================
+
+If pins are used as output, they can also be configured with pull-ups. This is
+done with pinctrl.
+
+Please refer file <devicetree/bindings/pinctrl/pinctrl-bindings.txt>
+for details of the common pinctrl bindings used by client devices,
+including the meaning of the phrase "pin configuration node".
+
+Optional Pinmux properties:
+--------------------------
+Following properties are required if default setting of pins are required
+at boot.
+- pinctrl-names: A pinctrl state named per <pinctrl-bindings.txt>.
+- pinctrl[0...n]: Properties to contain the phandle for pinctrl states per
+ <pinctrl-bindings.txt>.
+
+The pin configurations are defined as child of the pinctrl states node. Each
+sub-node have following properties:
+
+Required properties:
+------------------
+- pins: List of pins. Valid values of pins properties are:
+ gpio0 ... gpio7 for the devices with 8 GPIO pins and
+ gpio0 ... gpio15 for the devices with 16 GPIO pins.
+
+Optional properties:
+-------------------
+The following optional property is defined in the pinmux DT binding document
+<pinctrl-bindings.txt>. Absence of this property will leave the configuration
+in its default state.
+ bias-pull-up
+
+Example with pinctrl to pull-up output pins:
+gpio21: gpio@21 {
+ compatible = "microchip,mcp23017";
+ gpio-controller;
+ #gpio-cells = <0x2>;
+ reg = <0x21>;
+ interrupt-parent = <&socgpio>;
+ interrupts = <0x17 0x8>;
+ interrupt-names = "mcp23017@21 irq";
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ microchip,irq-mirror;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2cgpio0irq>, <&gpio21pullups>;
+ reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+
+ gpio21pullups: pinmux {
+ pins = "gpio0", "gpio1", "gpio2", "gpio3",
+ "gpio4", "gpio5", "gpio6", "gpio7",
+ "gpio8", "gpio9", "gpio10", "gpio11",
+ "gpio12", "gpio13", "gpio14", "gpio15";
+ bias-pull-up;
+ };
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-palmas.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-palmas.txt
new file mode 100644
index 0000000000..c28d4eb83b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-palmas.txt
@@ -0,0 +1,105 @@
+Palmas Pincontrol bindings
+
+The pins of Palmas device can be set on different option and provides
+the configuration for Pull UP/DOWN, open drain etc.
+
+Required properties:
+- compatible: It must be one of following:
+ - "ti,palmas-pinctrl" for Palma series of the pincontrol.
+ - "ti,tps65913-pinctrl" for Palma series device TPS65913.
+ - "ti,tps80036-pinctrl" for Palma series device TPS80036.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Palmas's pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+list of pins. This configuration can include the mux function to select on
+those pin(s), and various pin configuration parameters, such as pull-up,
+open drain.
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+Optional properties:
+- ti,palmas-enable-dvfs1: Enable DVFS1. Configure pins for DVFS1 mode.
+ Selection primary or secondary function associated to I2C2_SCL_SCE,
+ I2C2_SDA_SDO pin/pad for DVFS1 interface
+- ti,palmas-enable-dvfs2: Enable DVFS2. Configure pins for DVFS2 mode.
+ Selection primary or secondary function associated to GPADC_START
+ and SYSEN2 pin/pad for DVFS2 interface
+- ti,palmas-override-powerhold: This is applicable for PMICs for which
+ GPIO7 is configured in POWERHOLD mode which has higher priority
+ over DEV_ON bit and keeps the PMIC supplies on even after the DEV_ON
+ bit is turned off. This property enables driver to over ride the
+ POWERHOLD value to GPIO7 so as to turn off the PMIC in power off
+ scenarios. So for GPIO7 if ti,palmas-override-powerhold is set
+ then the GPIO_7 field should never be muxed to anything else.
+ It should be set to POWERHOLD by default and only in case of
+ power off scenarios the driver will over ride the mux value.
+
+This binding uses the following generic properties as defined in
+pinctrl-bindings.txt:
+
+Required: pins
+Options: function, bias-disable, bias-pull-up, bias-pull-down,
+ drive-open-drain.
+
+Note that many of these properties are only valid for certain specific pins.
+See the Palmas device datasheet for complete details regarding which pins
+support which functionality.
+
+Valid values for pin names are:
+ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, gpio8, gpio9,
+ gpio10, gpio11, gpio12, gpio13, gpio14, gpio15, vac, powergood,
+ nreswarm, pwrdown, gpadc_start, reset_in, nsleep, enable1, enable2,
+ int.
+
+Valid value of function names are:
+ gpio, led, pwm, regen, sysen, clk32kgaudio, id, vbus_det, chrg_det,
+ vac, vacok, powergood, usb_psel, msecure, pwrhold, int, nreswarm,
+ simrsto, simrsti, low_vbat, wireless_chrg1, rcm, pwrdown, gpadc_start,
+ reset_in, nsleep, enable.
+
+There are 4 special functions: opt0, opt1, opt2 and opt3. If any of these
+functions is selected then directly pins register will be written with 0, 1, 2
+or 3 respectively if it is valid for that pins or list of pins.
+
+Example:
+ palmas: tps65913 {
+ ....
+ pinctrl {
+ compatible = "ti,tps65913-pinctrl";
+ ti,palmas-enable-dvfs1;
+ pinctrl-names = "default";
+ pinctrl-0 = <&palmas_pins_state>;
+
+ palmas_pins_state: pinmux {
+ gpio0 {
+ pins = "gpio0";
+ function = "id";
+ bias-pull-up;
+ };
+
+ vac {
+ pins = "vac";
+ function = "vacok";
+ bias-pull-down;
+ };
+
+ gpio5 {
+ pins = "gpio5";
+ function = "opt0";
+ drive-open-drain = <1>;
+ };
+ };
+ };
+ ....
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt
new file mode 100644
index 0000000000..6ad49e51c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt
@@ -0,0 +1,63 @@
+Pincontrol driver for RK805 Power management IC.
+
+RK805 has 2 pins which can be configured as GPIO output only.
+
+Please refer file <devicetree/bindings/pinctrl/pinctrl-bindings.txt>
+for details of the common pinctrl bindings used by client devices,
+including the meaning of the phrase "pin configuration node".
+
+Optional Pinmux properties:
+--------------------------
+Following properties are required if default setting of pins are required
+at boot.
+- pinctrl-names: A pinctrl state named per <pinctrl-bindings.txt>.
+- pinctrl[0...n]: Properties to contain the phandle for pinctrl states per
+ <pinctrl-bindings.txt>.
+
+The pin configurations are defined as child of the pinctrl states node. Each
+sub-node have following properties:
+
+Required properties:
+------------------
+- #gpio-cells: Should be two. The first cell is the pin number and the
+ second is the GPIO flags.
+
+- gpio-controller: Marks the device node as a GPIO controller.
+
+- pins: List of pins. Valid values of pins properties are: gpio0, gpio1.
+
+First 2 properties must be added in the RK805 PMIC node, documented in
+Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml
+
+Optional properties:
+-------------------
+Following are optional properties defined as pinmux DT binding document
+<pinctrl-bindings.txt>. Absence of properties will leave the configuration
+on default.
+ function,
+ output-low,
+ output-high.
+
+Valid values for function properties are: gpio.
+
+There are also not customised properties for any GPIO.
+
+Example:
+--------
+rk805: rk805@18 {
+ compatible = "rockchip,rk805";
+ ...
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>, <&rk805_default>;
+
+ rk805_default: pinmux {
+ gpio01 {
+ pins = "gpio0", "gpio1";
+ function = "gpio";
+ output-high;
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml
new file mode 100644
index 0000000000..45a307d3ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml
@@ -0,0 +1,207 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/pinctrl-single.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic Pin Controller with a Single Register for One or More Pins
+
+maintainers:
+ - Tony Lindgren <tony@atomide.com>
+
+description:
+ Some pin controller devices use a single register for one or more pins. The
+ range of pin control registers can vary from one to many for each controller
+ instance. Some SoCs from Altera, Broadcom, HiSilicon, Ralink, and TI have this
+ kind of pin controller instances.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - pinctrl-single
+ - pinconf-single
+ - items:
+ - enum:
+ - ti,am437-padconf
+ - ti,am654-padconf
+ - ti,dra7-padconf
+ - ti,omap2420-padconf
+ - ti,omap2430-padconf
+ - ti,omap3-padconf
+ - ti,omap4-padconf
+ - ti,omap5-padconf
+ - const: pinctrl-single
+
+ reg:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ '#pinctrl-cells':
+ description:
+ Number of cells. Usually 2, consisting of register offset, pin configuration
+ value, and pinmux mode. Some controllers may use 1 for just offset and value.
+ enum: [ 1, 2 ]
+
+ pinctrl-single,bit-per-mux:
+ description: Optional flag to indicate register controls more than one pin
+ type: boolean
+
+ pinctrl-single,function-mask:
+ description: Mask of the allowed register bits
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ pinctrl-single,function-off:
+ description: Optional function off mode for disabled state
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ pinctrl-single,register-width:
+ description: Width of pin specific bits in the register
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 8, 16, 32 ]
+
+ pinctrl-single,gpio-range:
+ description: Optional list of pin base, nr pins & gpio function
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: phandle of a gpio-range node
+ - description: pin base
+ - description: number of pins
+ - description: gpio function
+
+ '#gpio-range-cells':
+ description: No longer needed, may exist in older files for gpio-ranges
+ deprecated: true
+ const: 3
+
+ gpio-range:
+ description: Optional node for gpio range cells
+ type: object
+ additionalProperties: false
+ properties:
+ '#pinctrl-single,gpio-range-cells':
+ description: Number of gpio range cells
+ const: 3
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+patternProperties:
+ '-pins(-[0-9]+)?$|-pin$':
+ description:
+ Pin group node name using naming ending in -pins followed by an optional
+ instance number
+ type: object
+ additionalProperties: false
+
+ properties:
+ pinctrl-single,pins:
+ description:
+ Array of pins as described in pinmux-node.yaml for pinctrl-pin-array
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ pinctrl-single,bits:
+ description: Register bit configuration for pinctrl-single,bit-per-mux
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - description: register offset
+ - description: value
+ - description: pin bitmask in the register
+
+ pinctrl-single,bias-pullup:
+ description: Optional bias pull up configuration
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - description: input
+ - description: enabled pull up bits
+ - description: disabled pull up bits
+ - description: bias pull up mask
+
+ pinctrl-single,bias-pulldown:
+ description: Optional bias pull down configuration
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - description: input
+ - description: enabled pull down bits
+ - description: disabled pull down bits
+ - description: bias pull down mask
+
+ pinctrl-single,drive-strength:
+ description: Optional drive strength configuration
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - description: drive strength current
+ - description: drive strength mask
+
+ pinctrl-single,input-schmitt:
+ description: Optional input schmitt configuration
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - description: input
+ - description: enable bits
+ - description: disable bits
+ - description: input schmitt mask
+
+ pinctrl-single,low-power-mode:
+ description: Optional low power mode configuration
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - description: low power mode value
+ - description: low power mode mask
+
+ pinctrl-single,slew-rate:
+ description: Optional slew rate configuration
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - description: slew rate
+ - description: slew rate mask
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+ - pinctrl-single,register-width
+
+additionalProperties: false
+
+examples:
+ - |
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pinmux@4a100040 {
+ compatible = "pinctrl-single";
+ reg = <0x4a100040 0x0196>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pinctrl-cells = <2>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ pinctrl-single,register-width = <16>;
+ pinctrl-single,function-mask = <0xffff>;
+ pinctrl-single,gpio-range = <&range 0 3 0>;
+ range: gpio-range {
+ #pinctrl-single,gpio-range-cells = <3>;
+ };
+
+ uart2-pins {
+ pinctrl-single,pins =
+ <0xd8 0x118>,
+ <0xda 0>,
+ <0xdc 0x118>,
+ <0xde 0>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt
new file mode 100644
index 0000000000..f8420520e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt
@@ -0,0 +1,47 @@
+CSR SiRFprimaII pinmux controller
+
+Required properties:
+- compatible : "sirf,prima2-pinctrl"
+- reg : Address range of the pinctrl registers
+- interrupts : Interrupts used by every GPIO group
+- gpio-controller : Indicates this device is a GPIO controller
+- interrupt-controller : Marks the device node as an interrupt controller
+Optional properties:
+- sirf,pullups : if n-th bit of m-th bank is set, set a pullup on GPIO-n of bank m
+- sirf,pulldowns : if n-th bit of m-th bank is set, set a pulldown on GPIO-n of bank m
+
+Please refer to pinctrl-bindings.txt in this directory for details of the common
+pinctrl bindings used by client devices.
+
+SiRFprimaII's pinmux nodes act as a container for an arbitrary number of subnodes.
+Each of these subnodes represents some desired configuration for a group of pins.
+
+Required subnode-properties:
+- sirf,pins : An array of strings. Each string contains the name of a group.
+- sirf,function: A string containing the name of the function to mux to the
+ group.
+
+ Valid values for group and function names can be found from looking at the
+ group and function arrays in driver files:
+ drivers/pinctrl/pinctrl-sirf.c
+
+For example, pinctrl might have subnodes like the following:
+ uart2_pins_a: uart2@0 {
+ uart {
+ sirf,pins = "uart2grp";
+ sirf,function = "uart2";
+ };
+ };
+ uart2_noflow_pins_a: uart2@1 {
+ uart {
+ sirf,pins = "uart2_nostreamctrlgrp";
+ sirf,function = "uart2_nostreamctrl";
+ };
+ };
+
+For a specific board, if it wants to use uart2 without hardware flow control,
+it can add the following to its board-specific .dts file.
+uart2: uart@b0070000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_noflow_pins_a>;
+}
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt
new file mode 100644
index 0000000000..48b9be48af
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt
@@ -0,0 +1,174 @@
+*ST pin controller.
+
+Each multi-function pin is controlled, driven and routed through the
+PIO multiplexing block. Each pin supports GPIO functionality (ALT0)
+and multiple alternate functions(ALT1 - ALTx) that directly connect
+the pin to different hardware blocks.
+
+When a pin is in GPIO mode, Output Enable (OE), Open Drain(OD), and
+Pull Up (PU) are driven by the related PIO block.
+
+ST pinctrl driver controls PIO multiplexing block and also interacts with
+gpio driver to configure a pin.
+
+GPIO bank can have one of the two possible types of interrupt-wirings.
+
+First type is via irqmux, single interrupt is used by multiple gpio banks. This
+reduces number of overall interrupts numbers required. All these banks belong to
+a single pincontroller.
+ _________
+ | |----> [gpio-bank (n) ]
+ | |----> [gpio-bank (n + 1)]
+ [irqN]-- | irq-mux |----> [gpio-bank (n + 2)]
+ | |----> [gpio-bank (... )]
+ |_________|----> [gpio-bank (n + 7)]
+
+Second type has a dedicated interrupt per gpio bank.
+
+ [irqN]----> [gpio-bank (n)]
+
+
+Pin controller node:
+Required properties:
+- compatible : should be "st,stih407-<pio-block>-pinctrl"
+- st,syscfg : Should be a phandle of the syscfg node.
+- st,retime-pin-mask : Should be mask to specify which pins can be retimed.
+ If the property is not present, it is assumed that all the pins in the
+ bank are capable of retiming. Retiming is mainly used to improve the
+ IO timing margins of external synchronous interfaces.
+- ranges : defines mapping between pin controller node (parent) to gpio-bank
+ node (children).
+
+Optional properties:
+- interrupts : Interrupt number of the irqmux. If the interrupt is shared
+ with other gpio banks via irqmux.
+ a irqline and gpio banks.
+- reg : irqmux memory resource. If irqmux is present.
+- reg-names : irqmux resource should be named as "irqmux".
+
+GPIO controller/bank node.
+Required properties:
+- gpio-controller : Indicates this device is a GPIO controller
+- #gpio-cells : Must be two.
+ - First cell: specifies the pin number inside the controller
+ - Second cell: specifies whether the pin is logically inverted.
+ - 0 = active high
+ - 1 = active low
+- st,bank-name : Should be a name string for this bank as specified in
+ datasheet.
+
+Optional properties:
+- interrupts : Interrupt number for this gpio bank. If there is a dedicated
+ interrupt wired up for this gpio bank.
+
+- interrupt-controller : Indicates this device is a interrupt controller. GPIO
+ bank can be an interrupt controller iff one of the interrupt type either via
+irqmux or a dedicated interrupt per bank is specified.
+
+- #interrupt-cells: the value of this property should be 2.
+ - First Cell: represents the external gpio interrupt number local to the
+ gpio interrupt space of the controller.
+ - Second Cell: flags to identify the type of the interrupt
+ - 1 = rising edge triggered
+ - 2 = falling edge triggered
+ - 3 = rising and falling edge triggered
+ - 4 = high level triggered
+ - 8 = low level triggered
+for related macros look in:
+include/dt-bindings/interrupt-controller/irq.h
+
+Example:
+ pin-controller-sbc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stih407-sbc-pinctrl";
+ st,syscfg = <&syscfg_sbc>;
+ reg = <0x0961f080 0x4>;
+ reg-names = "irqmux";
+ interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
+ interrupt-names = "irqmux";
+ ranges = <0 0x09610000 0x6000>;
+
+ pio0: gpio@9610000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x0 0x100>;
+ st,bank-name = "PIO0";
+ };
+ ...
+ pin-functions nodes follow...
+ };
+
+
+Contents of function subnode node:
+----------------------
+Required properties for pin configuration node:
+- st,pins : Child node with list of pins with configuration.
+
+Below is the format of how each pin conf should look like.
+
+<bank offset mux mode rt_type rt_delay rt_clk>
+
+Every PIO is represented with 4-7 parameters depending on retime configuration.
+Each parameter is explained as below.
+
+-bank : Should be bank phandle to which this PIO belongs.
+-offset : Offset in the PIO bank.
+-mux : Should be alternate function number associated this pin.
+ Use same numbers from datasheet.
+-mode :pin configuration is selected from one of the below values.
+ IN
+ IN_PU
+ OUT
+ BIDIR
+ BIDIR_PU
+
+-rt_type Retiming Configuration for the pin.
+ Possible retime configuration are:
+
+ ------- -------------
+ value args
+ ------- -------------
+ NICLK <delay> <clk>
+ ICLK_IO <delay> <clk>
+ BYPASS <delay>
+ DE_IO <delay> <clk>
+ SE_ICLK_IO <delay> <clk>
+ SE_NICLK_IO <delay> <clk>
+
+- delay is retime delay in pico seconds as mentioned in data sheet.
+
+- rt_clk :clk to be use for retime.
+ Possible values are:
+ CLK_A
+ CLK_B
+ CLK_C
+ CLK_D
+
+Example of mmcclk pin which is a bi-direction pull pu with retime config
+as non inverted clock retimed with CLK_B and delay of 0 pico seconds:
+
+pin-controller {
+ ...
+ mmc0 {
+ pinctrl_mmc: mmc {
+ st,pins {
+ mmcclk = <&PIO13 4 ALT4 BIDIR_PU NICLK 0 CLK_B>;
+ ...
+ };
+ };
+ ...
+ };
+};
+
+sdhci0:sdhci@fe810000{
+ ...
+ interrupt-parent = <&pio3>;
+ #interrupt-cells = <2>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; /* Interrupt line via PIO3-3 */
+ interrupt-names = "card-detect";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc>;
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-vt8500.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-vt8500.txt
new file mode 100644
index 0000000000..b3aa90f0ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-vt8500.txt
@@ -0,0 +1,57 @@
+VIA VT8500 and Wondermedia WM8xxx-series pinmux/gpio controller
+
+These SoCs contain a combined Pinmux/GPIO module. Each pin may operate as
+either a GPIO in, GPIO out or as an alternate function (I2C, SPI etc).
+
+Required properties:
+- compatible: "via,vt8500-pinctrl", "wm,wm8505-pinctrl", "wm,wm8650-pinctrl",
+ "wm8750-pinctrl" or "wm,wm8850-pinctrl"
+- reg: Should contain the physical address of the module's registers.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Should be two.
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells : Should be two. The first cell is the pin number and the
+ second cell is used to specify optional parameters.
+ bit 0 - active low
+
+Please refer to ../gpio/gpio.txt for a general description of GPIO bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Each pin configuration node lists the pin(s) to which it applies, and one or
+more of the mux functions to select on those pin(s), and pull-up/down
+configuration. Each subnode only affects those parameters that are explicitly
+listed. In other words, a subnode that lists only a mux function implies no
+information about any pull configuration. Similarly, a subnode that lists only
+a pull parameter implies no information about the mux function.
+
+Required subnode-properties:
+- wm,pins: An array of cells. Each cell contains the ID of a pin.
+
+Optional subnode-properties:
+- wm,function: Integer, containing the function to mux to the pin(s):
+ 0: GPIO in
+ 1: GPIO out
+ 2: alternate
+
+- wm,pull: Integer, representing the pull-down/up to apply to the pin(s):
+ 0: none
+ 1: down
+ 2: up
+
+Each of wm,function and wm,pull may contain either a single value which
+will be applied to all pins in wm,pins, or one value for each entry in
+wm,pins.
+
+Example:
+
+ pinctrl: pinctrl {
+ compatible = "wm,wm8505-pinctrl";
+ reg = <0xD8110000 0x10000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl.yaml
new file mode 100644
index 0000000000..d471563119
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Pin controller device
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+ - Rafał Miłecki <rafal@milecki.pl>
+
+description: |
+ Pin controller devices should contain the pin configuration nodes that client
+ devices reference.
+
+ The contents of each of those pin configuration child nodes is defined
+ entirely by the binding for the individual pin controller device. There
+ exists no common standard for this content. The pinctrl framework only
+ provides generic helper bindings that the pin controller driver can use.
+
+ The pin configuration nodes need not be direct children of the pin controller
+ device; they may be grandchildren, for example. Whether this is legal, and
+ whether there is any interaction between the child and intermediate parent
+ nodes, is again defined entirely by the binding for the individual pin
+ controller device.
+
+properties:
+ $nodename:
+ pattern: "^(pinctrl|pinmux)(@[0-9a-f]+)?$"
+
+ "#pinctrl-cells":
+ description: >
+ Number of pin control cells in addition to the index within the pin
+ controller device instance.
+
+ pinctrl-use-default:
+ type: boolean
+ description: >
+ Indicates that the OS can use the boot default pin configuration. This
+ allows using an OS that does not have a driver for the pin controller.
+ This property can be set either globally for the pin controller or in
+ child nodes for individual pin group control.
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt
new file mode 100644
index 0000000000..4586155969
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt
@@ -0,0 +1,155 @@
+ST Microelectronics, SPEAr pinmux controller
+
+Required properties:
+- compatible : "st,spear300-pinmux"
+ : "st,spear310-pinmux"
+ : "st,spear320-pinmux"
+ : "st,spear1310-pinmux"
+ : "st,spear1340-pinmux"
+- reg : Address range of the pinctrl registers
+- st,pinmux-mode: Mandatory for SPEAr300 and SPEAr320 and invalid for others.
+ - Its values for SPEAr300:
+ - NAND_MODE : <0>
+ - NOR_MODE : <1>
+ - PHOTO_FRAME_MODE : <2>
+ - LEND_IP_PHONE_MODE : <3>
+ - HEND_IP_PHONE_MODE : <4>
+ - LEND_WIFI_PHONE_MODE : <5>
+ - HEND_WIFI_PHONE_MODE : <6>
+ - ATA_PABX_WI2S_MODE : <7>
+ - ATA_PABX_I2S_MODE : <8>
+ - CAML_LCDW_MODE : <9>
+ - CAMU_LCD_MODE : <10>
+ - CAMU_WLCD_MODE : <11>
+ - CAML_LCD_MODE : <12>
+ - Its values for SPEAr320:
+ - AUTO_NET_SMII_MODE : <0>
+ - AUTO_NET_MII_MODE : <1>
+ - AUTO_EXP_MODE : <2>
+ - SMALL_PRINTERS_MODE : <3>
+ - EXTENDED_MODE : <4>
+
+Please refer to pinctrl-bindings.txt in this directory for details of the common
+pinctrl bindings used by client devices.
+
+SPEAr's pinmux nodes act as a container for an arbitrary number of subnodes. Each
+of these subnodes represents muxing for a pin, a group, or a list of pins or
+groups.
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Required subnode-properties:
+- st,pins : An array of strings. Each string contains the name of a pin or
+ group.
+- st,function: A string containing the name of the function to mux to the pin or
+ group. See the SPEAr's TRM to determine which are valid for each pin or group.
+
+ Valid values for group and function names can be found from looking at the
+ group and function arrays in driver files:
+ drivers/pinctrl/spear/pinctrl-spear3*0.c
+
+Valid values for group names are:
+For All SPEAr3xx machines:
+ "firda_grp", "i2c0_grp", "ssp_cs_grp", "ssp0_grp", "mii0_grp",
+ "gpio0_pin0_grp", "gpio0_pin1_grp", "gpio0_pin2_grp", "gpio0_pin3_grp",
+ "gpio0_pin4_grp", "gpio0_pin5_grp", "uart0_ext_grp", "uart0_grp",
+ "timer_0_1_grp", timer_0_1_pins, "timer_2_3_grp"
+
+For SPEAr300 machines:
+ "fsmc_2chips_grp", "fsmc_4chips_grp", "clcd_lcdmode_grp",
+ "clcd_pfmode_grp", "tdm_grp", "i2c_clk_grp_grp", "caml_grp", "camu_grp",
+ "dac_grp", "i2s_grp", "sdhci_4bit_grp", "sdhci_8bit_grp",
+ "gpio1_0_to_3_grp", "gpio1_4_to_7_grp"
+
+For SPEAr310 machines:
+ "emi_cs_0_to_5_grp", "uart1_grp", "uart2_grp", "uart3_grp", "uart4_grp",
+ "uart5_grp", "fsmc_grp", "rs485_0_grp", "rs485_1_grp", "tdm_grp"
+
+For SPEAr320 machines:
+ "clcd_grp", "emi_grp", "fsmc_8bit_grp", "fsmc_16bit_grp", "spp_grp",
+ "sdhci_led_grp", "sdhci_cd_12_grp", "sdhci_cd_51_grp", "i2s_grp",
+ "uart1_grp", "uart1_modem_2_to_7_grp", "uart1_modem_31_to_36_grp",
+ "uart1_modem_34_to_45_grp", "uart1_modem_80_to_85_grp", "uart2_grp",
+ "uart3_8_9_grp", "uart3_15_16_grp", "uart3_41_42_grp",
+ "uart3_52_53_grp", "uart3_73_74_grp", "uart3_94_95_grp",
+ "uart3_98_99_grp", "uart4_6_7_grp", "uart4_13_14_grp",
+ "uart4_39_40_grp", "uart4_71_72_grp", "uart4_92_93_grp",
+ "uart4_100_101_grp", "uart5_4_5_grp", "uart5_37_38_grp",
+ "uart5_69_70_grp", "uart5_90_91_grp", "uart6_2_3_grp",
+ "uart6_88_89_grp", "rs485_grp", "touchscreen_grp", "can0_grp",
+ "can1_grp", "pwm0_1_pin_8_9_grp", "pwm0_1_pin_14_15_grp",
+ "pwm0_1_pin_30_31_grp", "pwm0_1_pin_37_38_grp", "pwm0_1_pin_42_43_grp",
+ "pwm0_1_pin_59_60_grp", "pwm0_1_pin_88_89_grp", "pwm2_pin_7_grp",
+ "pwm2_pin_13_grp", "pwm2_pin_29_grp", "pwm2_pin_34_grp",
+ "pwm2_pin_41_grp", "pwm2_pin_58_grp", "pwm2_pin_87_grp",
+ "pwm3_pin_6_grp", "pwm3_pin_12_grp", "pwm3_pin_28_grp",
+ "pwm3_pin_40_grp", "pwm3_pin_57_grp", "pwm3_pin_86_grp",
+ "ssp1_17_20_grp", "ssp1_36_39_grp", "ssp1_48_51_grp", "ssp1_65_68_grp",
+ "ssp1_94_97_grp", "ssp2_13_16_grp", "ssp2_32_35_grp", "ssp2_44_47_grp",
+ "ssp2_61_64_grp", "ssp2_90_93_grp", "mii2_grp", "smii0_1_grp",
+ "rmii0_1_grp", "i2c1_8_9_grp", "i2c1_98_99_grp", "i2c2_0_1_grp",
+ "i2c2_2_3_grp", "i2c2_19_20_grp", "i2c2_75_76_grp", "i2c2_96_97_grp"
+
+For SPEAr1310 machines:
+ "i2c0_grp", "ssp0_grp", "ssp0_cs0_grp", "ssp0_cs1_2_grp", "i2s0_grp",
+ "i2s1_grp", "clcd_grp", "clcd_high_res_grp", "arm_gpio_grp",
+ "smi_2_chips_grp", "smi_4_chips_grp", "gmii_grp", "rgmii_grp",
+ "smii_0_1_2_grp", "ras_mii_txclk_grp", "nand_8bit_grp",
+ "nand_16bit_grp", "nand_4_chips_grp", "keyboard_6x6_grp",
+ "keyboard_rowcol6_8_grp", "uart0_grp", "uart0_modem_grp",
+ "gpt0_tmr0_grp", "gpt0_tmr1_grp", "gpt1_tmr0_grp", "gpt1_tmr1_grp",
+ "sdhci_grp", "cf_grp", "xd_grp", "touch_xy_grp",
+ "uart1_disable_i2c_grp", "uart1_disable_sd_grp", "uart2_3_grp",
+ "uart4_grp", "uart5_grp", "rs485_0_1_tdm_0_1_grp", "i2c_1_2_grp",
+ "i2c3_dis_smi_clcd_grp", "i2c3_dis_sd_i2s0_grp", "i2c_4_5_dis_smi_grp",
+ "i2c4_dis_sd_grp", "i2c5_dis_sd_grp", "i2c_6_7_dis_kbd_grp",
+ "i2c6_dis_sd_grp", "i2c7_dis_sd_grp", "can0_dis_nor_grp",
+ "can0_dis_sd_grp", "can1_dis_sd_grp", "can1_dis_kbd_grp", "pcie0_grp",
+ "pcie1_grp", "pcie2_grp", "sata0_grp", "sata1_grp", "sata2_grp",
+ "ssp1_dis_kbd_grp", "ssp1_dis_sd_grp", "gpt64_grp"
+
+For SPEAr1340 machines:
+ "pads_as_gpio_grp", "fsmc_8bit_grp", "fsmc_16bit_grp", "fsmc_pnor_grp",
+ "keyboard_row_col_grp", "keyboard_col5_grp", "spdif_in_grp",
+ "spdif_out_grp", "gpt_0_1_grp", "pwm0_grp", "pwm1_grp", "pwm2_grp",
+ "pwm3_grp", "vip_mux_grp", "vip_mux_cam0_grp", "vip_mux_cam1_grp",
+ "vip_mux_cam2_grp", "vip_mux_cam3_grp", "cam0_grp", "cam1_grp",
+ "cam2_grp", "cam3_grp", "smi_grp", "ssp0_grp", "ssp0_cs1_grp",
+ "ssp0_cs2_grp", "ssp0_cs3_grp", "uart0_grp", "uart0_enh_grp",
+ "uart1_grp", "i2s_in_grp", "i2s_out_grp", "gmii_grp", "rgmii_grp",
+ "rmii_grp", "sgmii_grp", "i2c0_grp", "i2c1_grp", "cec0_grp", "cec1_grp",
+ "sdhci_grp", "cf_grp", "xd_grp", "clcd_grp", "arm_trace_grp",
+ "miphy_dbg_grp", "pcie_grp", "sata_grp"
+
+Valid values for function names are:
+For All SPEAr3xx machines:
+ "firda", "i2c0", "ssp_cs", "ssp0", "mii0", "gpio0", "uart0_ext",
+ "uart0", "timer_0_1", "timer_2_3"
+
+For SPEAr300 machines:
+ "fsmc", "clcd", "tdm", "i2c1", "cam", "dac", "i2s", "sdhci", "gpio1"
+
+For SPEAr310 machines:
+ "emi", "uart1", "uart2", "uart3", "uart4", "uart5", "fsmc", "rs485_0",
+ "rs485_1", "tdm"
+
+For SPEAr320 machines:
+ "clcd", "emi", "fsmc", "spp", "sdhci", "i2s", "uart1", "uart1_modem",
+ "uart2", "uart3", "uart4", "uart5", "uart6", "rs485", "touchscreen",
+ "can0", "can1", "pwm0_1", "pwm2", "pwm3", "ssp1", "ssp2", "mii2",
+ "mii0_1", "i2c1", "i2c2"
+
+
+For SPEAr1310 machines:
+ "i2c0", "ssp0", "i2s0", "i2s1", "clcd", "arm_gpio", "smi", "gmii",
+ "rgmii", "smii_0_1_2", "ras_mii_txclk", "nand", "keyboard", "uart0",
+ "gpt0", "gpt1", "sdhci", "cf", "xd", "touchscreen", "uart1", "uart2_3",
+ "uart4", "uart5", "rs485_0_1_tdm_0_1", "i2c_1_2", "i2c3_i2s1",
+ "i2c_4_5", "i2c_6_7", "can0", "can1", "pci", "sata", "ssp1", "gpt64"
+
+For SPEAr1340 machines:
+ "pads_as_gpio", "fsmc", "keyboard", "spdif_in", "spdif_out", "gpt_0_1",
+ "pwm", "vip", "cam0", "cam1", "cam2", "cam3", "smi", "ssp0", "uart0",
+ "uart1", "i2s", "gmac", "i2c0", "i2c1", "cec0", "cec1", "sdhci", "cf",
+ "xd", "clcd", "arm_trace", "miphy_dbg", "pcie", "sata"
diff --git a/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml
new file mode 100644
index 0000000000..ca9d246d46
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/pinmux-node.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic Pin Multiplexing Node
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+ The contents of the pin configuration child nodes are defined by the binding
+ for the individual pin controller device. The pin configuration nodes need not
+ be direct children of the pin controller device; they may be grandchildren,
+ for example. Whether this is legal, and whether there is any interaction
+ between the child and intermediate parent nodes, is again defined entirely by
+ the binding for the individual pin controller device.
+
+ While not required to be used, there are 3 generic forms of pin muxing nodes
+ which pin controller devices can use.
+
+ pin multiplexing nodes:
+
+ Example:
+
+ state_0_node_a {
+ uart0 {
+ function = "uart0";
+ groups = "u0rxtx", "u0rtscts";
+ };
+ };
+ state_1_node_a {
+ spi {
+ function = "spi0";
+ groups = "spi0pins";
+ };
+ };
+ state_2_node_a {
+ function = "i2c0";
+ pins = "mfio29", "mfio30";
+ };
+
+ Optionally an alternative binding can be used if more suitable depending on the
+ pin controller hardware. For hardware where there is a large number of identical
+ pin controller instances, naming each pin and function can easily become
+ unmaintainable. This is especially the case if the same controller is used for
+ different pins and functions depending on the SoC revision and packaging.
+
+ For cases like this, the pin controller driver may use pinctrl-pin-array helper
+ binding with a hardware based index and a number of pin configuration values:
+
+ pincontroller {
+ ... /* Standard DT properties for the device itself elided */
+ #pinctrl-cells = <2>;
+
+ state_0_node_a {
+ pinctrl-pin-array = <
+ 0 A_DELAY_PS(0) G_DELAY_PS(120)
+ 4 A_DELAY_PS(0) G_DELAY_PS(360)
+ ...
+ >;
+ };
+ ...
+ };
+
+ Above #pinctrl-cells specifies the number of value cells in addition to the
+ index of the registers. This is similar to the interrupts-extended binding with
+ one exception. There is no need to specify the phandle for each entry as that
+ is already known as the defined pins are always children of the pin controller
+ node. Further having the phandle pointing to another pin controller would not
+ currently work as the pinctrl framework uses named modes to group pins for each
+ pin control device.
+
+ The index for pinctrl-pin-array must relate to the hardware for the pinctrl
+ registers, and must not be a virtual index of pin instances. The reason for
+ this is to avoid mapping of the index in the dts files and the pin controller
+ driver as it can change.
+
+ For hardware where pin multiplexing configurations have to be specified for
+ each single pin the number of required sub-nodes containing "pin" and
+ "function" properties can quickly escalate and become hard to write and
+ maintain.
+
+ For cases like this, the pin controller driver may use the pinmux helper
+ property, where the pin identifier is provided with mux configuration settings
+ in a pinmux group. A pinmux group consists of the pin identifier and mux
+ settings represented as a single integer or an array of integers.
+
+ The pinmux property accepts an array of pinmux groups, each of them describing
+ a single pin multiplexing configuration.
+
+ pincontroller {
+ state_0_node_a {
+ pinmux = <PINMUX_GROUP>, <PINMUX_GROUP>, ...;
+ };
+ };
+
+ Each individual pin controller driver bindings documentation shall specify
+ how pin IDs and pin multiplexing configuration are defined and assembled
+ together in a pinmux group.
+
+properties:
+ function:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: The mux function to select
+
+ pins:
+ oneOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32-array
+ - $ref: /schemas/types.yaml#/definitions/string-array
+ description:
+ The list of pin identifiers that properties in the node apply to. The
+ specific binding for the hardware defines whether the entries are integers
+ or strings, and their meaning.
+
+ groups:
+ $ref: /schemas/types.yaml#/definitions/string-array
+ description:
+ the group to apply the properties to, if the driver supports
+ configuration of whole groups rather than individual pins (either
+ this, "pins" or "pinmux" has to be specified)
+
+ pinmux:
+ description:
+ The list of numeric pin ids and their mux settings that properties in the
+ node apply to (either this, "pins" or "groups" have to be specified)
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ pinctrl-pin-array:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt
new file mode 100644
index 0000000000..4e90ddd777
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt
@@ -0,0 +1,95 @@
+Qualcomm APQ8064 TLMM block
+
+Required properties:
+- compatible: "qcom,apq8064-pinctrl"
+- reg: Should be the base address and length of the TLMM block.
+- interrupts: Should be the parent IRQ of the TLMM block.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Should be two.
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells : Should be two.
+ The first cell is the gpio pin number and the
+ second cell is used for optional parameters.
+- gpio-ranges: see ../gpio/gpio.txt
+
+Optional properties:
+
+- gpio-reserved-ranges: see ../gpio/gpio.txt
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Qualcomm's pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+ pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength,
+ output-low, output-high.
+
+Non-empty subnodes must specify the 'pins' property.
+
+Valid values for pins are:
+ gpio0-gpio89
+
+Valid values for function are:
+ cam_mclk, codec_mic_i2s, codec_spkr_i2s, gp_clk_0a, gp_clk_0b, gp_clk_1a,
+ gp_clk_1b, gp_clk_2a, gp_clk_2b, gpio, gsbi1, gsbi2, gsbi3, gsbi4,
+ gsbi4_cam_i2c, gsbi5, gsbi5_spi_cs1, gsbi5_spi_cs2, gsbi5_spi_cs3, gsbi6,
+ gsbi6_spi_cs1, gsbi6_spi_cs2, gsbi6_spi_cs3, gsbi7, gsbi7_spi_cs1,
+ gsbi7_spi_cs2, gsbi7_spi_cs3, gsbi_cam_i2c, hdmi, mi2s, riva_bt, riva_fm,
+ riva_wlan, sdc2, sdc4, slimbus, spkr_i2s, tsif1, tsif2, usb2_hsic, ps_hold
+
+Example:
+
+ msmgpio: pinctrl@800000 {
+ compatible = "qcom,apq8064-pinctrl";
+ reg = <0x800000 0x4000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 16 0x4>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gsbi5_uart_default>;
+ gpio-ranges = <&msmgpio 0 0 90>;
+
+ gsbi5_uart_default: gsbi5_uart_default {
+ mux {
+ pins = "gpio51", "gpio52";
+ function = "gsbi5";
+ };
+
+ tx {
+ pins = "gpio51";
+ drive-strength = <4>;
+ bias-disable;
+ };
+
+ rx {
+ pins = "gpio52";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt
new file mode 100644
index 0000000000..c9782397ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt
@@ -0,0 +1,188 @@
+Qualcomm APQ8084 TLMM block
+
+This binding describes the Top Level Mode Multiplexer block found in the
+MSM8960 platform.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be "qcom,apq8084-pinctrl"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: the base address and size of the TLMM register space.
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: should specify the TLMM summary IRQ.
+
+- interrupt-controller:
+ Usage: required
+ Value type: <none>
+ Definition: identifies this node as an interrupt controller
+
+- #interrupt-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 2. Specifying the pin number and flags, as defined
+ in <dt-bindings/interrupt-controller/irq.h>
+
+- gpio-controller:
+ Usage: required
+ Value type: <none>
+ Definition: identifies this node as a gpio controller
+
+- #gpio-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 2. Specifying the pin number and flags, as defined
+ in <dt-bindings/gpio/gpio.h>
+
+- gpio-ranges:
+ Usage: required
+ Definition: see ../gpio/gpio.txt
+
+- gpio-reserved-ranges:
+ Usage: optional
+ Definition: see ../gpio/gpio.txt
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+
+PIN CONFIGURATION NODES:
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+- pins:
+ Usage: required
+ Value type: <string-array>
+ Definition: List of gpio pins affected by the properties specified in
+ this subnode. Valid pins are:
+ gpio0-gpio146,
+ sdc1_clk,
+ sdc1_cmd,
+ sdc1_data
+ sdc2_clk,
+ sdc2_cmd,
+ sdc2_data
+
+- function:
+ Usage: required
+ Value type: <string>
+ Definition: Specify the alternative function to be configured for the
+ specified pins. Functions are only valid for gpio pins.
+ Valid values are:
+ adsp_ext, audio_ref, blsp_i2c1, blsp_i2c2, blsp_i2c3,
+ blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8,
+ blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12,
+ blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi4, blsp_spi5,
+ blsp_spi6, blsp_spi7, blsp_spi8, blsp_spi9, blsp_spi10,
+ blsp_spi11, blsp_spi12, blsp_uart1, blsp_uart2, blsp_uart3,
+ blsp_uart4, blsp_uart5, blsp_uart6, blsp_uart7, blsp_uart8,
+ blsp_uart9, blsp_uart10, blsp_uart11, blsp_uart12,
+ blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim4, blsp_uim5,
+ blsp_uim6, blsp_uim7, blsp_uim8, blsp_uim9, blsp_uim10,
+ blsp_uim11, blsp_uim12, cam_mclk0, cam_mclk1, cam_mclk2,
+ cam_mclk3, cci_async, cci_async_in0, cci_i2c0, cci_i2c1,
+ cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
+ edp_hpd, gcc_gp1, gcc_gp2, gcc_gp3, gcc_obt, gcc_vtt,i
+ gp_mn, gp_pdm0, gp_pdm1, gp_pdm2, gp0_clk, gp1_clk, gpio,
+ hdmi_cec, hdmi_ddc, hdmi_dtest, hdmi_hpd, hdmi_rcv, hsic,
+ ldo_en, ldo_update, mdp_vsync, pci_e0, pci_e0_n, pci_e0_rst,
+ pci_e1, pci_e1_rst, pci_e1_rst_n, pci_e1_clkreq_n, pri_mi2s,
+ qua_mi2s, sata_act, sata_devsleep, sata_devsleep_n,
+ sd_write, sdc_emmc_mode, sdc3, sdc4, sec_mi2s, slimbus,
+ spdif_tx, spkr_i2s, spkr_i2s_ws, spss_geni, ter_mi2s, tsif1,
+ tsif2, uim, uim_batt_alarm
+
+- bias-disable:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins should be configured as no pull.
+
+- bias-pull-down:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins should be configured as pull down.
+
+- bias-pull-up:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins should be configured as pull up.
+
+- output-high:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins are configured in output mode, driven
+ high.
+ Not valid for sdc pins.
+
+- output-low:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins are configured in output mode, driven
+ low.
+ Not valid for sdc pins.
+
+- drive-strength:
+ Usage: optional
+ Value type: <u32>
+ Definition: Selects the drive strength for the specified pins, in mA.
+ Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
+
+Example:
+
+ tlmm: pinctrl@fd510000 {
+ compatible = "qcom,apq8084-pinctrl";
+ reg = <0xfd510000 0x4000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 147>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 208 0>;
+
+ uart2: uart2-default {
+ mux {
+ pins = "gpio4", "gpio5";
+ function = "blsp_uart2";
+ };
+
+ tx {
+ pins = "gpio4";
+ drive-strength = <4>;
+ bias-disable;
+ };
+
+ rx {
+ pins = "gpio5";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt
new file mode 100644
index 0000000000..97858a7c07
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt
@@ -0,0 +1,85 @@
+Qualcomm Atheros IPQ4019 TLMM block
+
+This is the Top Level Mode Multiplexor block found on the Qualcomm IPQ8019
+platform, it provides pinctrl, pinmux, pinconf, and gpiolib facilities.
+
+Required properties:
+- compatible: "qcom,ipq4019-pinctrl"
+- reg: Should be the base address and length of the TLMM block.
+- interrupts: Should be the parent IRQ of the TLMM block.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Should be two.
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells : Should be two.
+ The first cell is the gpio pin number and the
+ second cell is used for optional parameters.
+- gpio-ranges: see ../gpio/gpio.txt
+
+Optional properties:
+
+- gpio-reserved-ranges: see ../gpio/gpio.txt
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+ pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-open-drain,
+ drive-strength.
+
+Non-empty subnodes must specify the 'pins' property.
+Note that not all properties are valid for all pins.
+
+
+Valid values for qcom,pins are:
+ gpio0-gpio99
+ Supports mux, bias and drive-strength
+
+Valid values for qcom,function are:
+aud_pin, audio_pwm, blsp_i2c0, blsp_i2c1, blsp_spi0, blsp_spi1, blsp_uart0,
+blsp_uart1, chip_rst, gpio, i2s_rx, i2s_spdif_in, i2s_spdif_out, i2s_td, i2s_tx,
+jtag, led0, led1, led2, led3, led4, led5, led6, led7, led8, led9, led10, led11,
+mdc, mdio, pcie, pmu, prng_rosc, qpic, rgmii, rmii, sdio, smart0, smart1,
+smart2, smart3, tm, wifi0, wifi1
+
+Example:
+
+ tlmm: pinctrl@1000000 {
+ compatible = "qcom,ipq4019-pinctrl";
+ reg = <0x1000000 0x300000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 100>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 208 0>;
+
+ serial_pins: serial_pinmux {
+ mux {
+ pins = "gpio60", "gpio61";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml
new file mode 100644
index 0000000000..fad0118fd5
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5018-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm IPQ5018 TLMM pin controller
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm IPQ5018 SoC.
+
+properties:
+ compatible:
+ const: qcom,ipq5018-tlmm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 24
+
+ gpio-line-names:
+ maxItems: 47
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-ipq5018-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-ipq5018-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-ipq5018-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ pattern: "^gpio([0-9]|[1-3][0-9]|4[0-6])$"
+ minItems: 1
+ maxItems: 8
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ atest_char, audio_pdm0, audio_pdm1, audio_rxbclk, audio_rxd,
+ audio_rxfsync, audio_rxmclk, audio_txbclk, audio_txd,
+ audio_txfsync, audio_txmclk, blsp0_i2c, blsp0_spi, blsp0_uart0,
+ blsp0_uart1, blsp1_i2c0, blsp1_i2c1, blsp1_spi0, blsp1_spi1,
+ blsp1_uart0, blsp1_uart1, blsp1_uart2, blsp2_i2c0, blsp2_i2c1,
+ blsp2_spi, blsp2_spi0, blsp2_spi1, btss, burn0, burn1, cri_trng,
+ cri_trng0, cri_trng1, cxc_clk, cxc_data, dbg_out, eud_gpio,
+ gcc_plltest, gcc_tlmm, gpio, led0, led2, mac0, mac1, mdc, mdio,
+ pcie0_clk, pcie0_wake, pcie1_clk, pcie1_wake, pll_test,
+ prng_rosc, pwm0, pwm1, pwm2, pwm3, qdss_cti_trig_in_a0,
+ qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, qdss_cti_trig_in_b1,
+ qdss_cti_trig_out_a0, qdss_cti_trig_out_a1,
+ qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a,
+ qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b,
+ qdss_tracedata_a, qdss_tracedata_b, qspi_clk, qspi_cs,
+ qspi_data, reset_out, sdc1_clk, sdc1_cmd, sdc1_data, wci_txd,
+ wci_rxd, wsa_swrm, wsi_clk3, wsi_data3, wsis_reset, xfem ]
+
+ required:
+ - pins
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ tlmm: pinctrl@1000000 {
+ compatible = "qcom,ipq5018-tlmm";
+ reg = <0x01000000 0x300000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 47>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+ uart-w-state {
+ rx-pins {
+ pins = "gpio33";
+ function = "blsp1_uart1";
+ bias-pull-down;
+ };
+
+ tx-pins {
+ pins = "gpio34";
+ function = "blsp1_uart1";
+ bias-pull-down;
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml
new file mode 100644
index 0000000000..3d3086ae1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq5332-tlmm.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5332-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm IPQ5332 TLMM pin controller
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description: |
+ Top Level Mode Multiplexer pin controller in Qualcomm IPQ5332 SoC.
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,ipq5332-tlmm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 27
+
+ gpio-line-names:
+ maxItems: 53
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-ipq5332-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-ipq5332-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-ipq5332-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ pattern: "^gpio([0-9]|[1-4][0-9]|5[0-2])$"
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ atest_char, atest_char0, atest_char1, atest_char2, atest_char3,
+ atest_tic, audio_pri, audio_pri0, audio_pri1, audio_sec,
+ audio_sec0, audio_sec1, blsp0_i2c, blsp0_spi, blsp0_uart0,
+ blsp0_uart1, blsp1_i2c0, blsp1_i2c1, blsp1_spi0, blsp1_spi1,
+ blsp1_uart0, blsp1_uart1, blsp1_uart2, blsp2_i2c0, blsp2_i2c1,
+ blsp2_spi, blsp2_spi0, blsp2_spi1, core_voltage, cri_trng0,
+ cri_trng1, cri_trng2, cri_trng3, cxc_clk, cxc_data, dbg_out,
+ gcc_plltest, gcc_tlmm, gpio, lock_det, mac0, mac1, mdc0, mdc1,
+ mdio0, mdio1, pc, pcie0_clk, pcie0_wake, pcie1_clk, pcie1_wake,
+ pcie2_clk, pcie2_wake, pll_test, prng_rosc0, prng_rosc1,
+ prng_rosc2, prng_rosc3, pta, pwm0, pwm1, pwm2, pwm3,
+ qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, qdss_cti_trig_in_b0,
+ qdss_cti_trig_in_b1, qdss_cti_trig_out_a0,
+ qdss_cti_trig_out_a1, qdss_cti_trig_out_b0,
+ qdss_cti_trig_out_b1, qdss_traceclk_a, qdss_traceclk_b,
+ qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a,
+ qdss_tracedata_b, qspi_data, qspi_clk, qspi_cs, resout, rx0,
+ rx1, sdc_data, sdc_clk, sdc_cmd, tsens_max, wci_txd, wci_rxd,
+ wsi_clk, wsi_clk3, wsi_data, wsi_data3, wsis_reset, xfem ]
+
+ required:
+ - pins
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ tlmm: pinctrl@1000000 {
+ compatible = "qcom,ipq5332-tlmm";
+ reg = <0x01000000 0x300000>;
+ gpio-controller;
+ #gpio-cells = <0x2>;
+ gpio-ranges = <&tlmm 0 0 53>;
+ interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+
+ serial0-state {
+ pins = "gpio18", "gpio19";
+ function = "blsp0_uart0";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
new file mode 100644
index 0000000000..7c3e5e043f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,ipq6018-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. IPQ6018 TLMM block
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm IPQ6018 SoC.
+
+properties:
+ compatible:
+ const: qcom,ipq6018-pinctrl
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ "#gpio-cells": true
+ gpio-ranges: true
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-ipq6018-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-ipq6018-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-ipq6018-tlmm-state:
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([1-9]|[1-7][0-9]|80)$"
+ - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd,
+ sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2,
+ qdsd_data3 ]
+ minItems: 1
+ maxItems: 16
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+ enum: [ adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char,
+ atest_char0, atest_char1, atest_char2, atest_char3, atest_combodac,
+ atest_gpsadc0, atest_gpsadc1, atest_tsens, atest_wlan0,
+ atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, blsp0_i2c, blsp1_i2c,
+ blsp2_i2c, blsp3_i2c, blsp4_i2c, blsp5_i2c, blsp0_spi, blsp1_spi,
+ blsp1_spi_cs1, blsp1_spi_cs2, blsp1_spi_cs3, blsp2_spi,
+ blsp2_spi_cs1, blsp2_spi_cs2, blsp2_spi_cs3, blsp3_spi,
+ blsp3_spi_cs1, blsp3_spi_cs2, blsp3_spi_cs3, blsp4_spi, blsp5_spi,
+ blsp0_uart, blsp1_uart, blsp2_uart, blsp1_uim, blsp2_uim, cam1_rst,
+ cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0,
+ cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, display_5v,
+ dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us, ext_lpass,
+ flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a,
+ gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gpio, gsm0_tx0,
+ gsm0_tx1, gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0, kpsns1, kpsns2,
+ ldo_en, ldo_update, mag_int, mdp_vsync, modem_tsync, m_voc,
+ nav_pps, nav_tsync, pa_indicator, pbs0, pbs1, pbs2, pri_mi2s,
+ pri_mi2s_ws, prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b,
+ pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a,
+ pwr_nav_enabled_b, qdss_ctitrig_in_a0, qdss_ctitrig_in_a1,
+ qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0,
+ qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1,
+ qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b,
+ qdss_tracedata_a, qdss_tracedata_b, qpic_pad, reset_n, sd_card,
+ sd_write, sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2,
+ uim3, uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst ]
+
+ required:
+ - pins
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ tlmm: pinctrl@1000000 {
+ compatible = "qcom,ipq6018-pinctrl";
+ reg = <0x01000000 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 80>;
+
+ serial3-state {
+ pins = "gpio44", "gpio45";
+ function = "blsp2_uart";
+ drive-strength = <8>;
+ bias-pull-down;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt
new file mode 100644
index 0000000000..a7aaaa7db8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt
@@ -0,0 +1,101 @@
+Qualcomm IPQ8064 TLMM block
+
+Required properties:
+- compatible: "qcom,ipq8064-pinctrl"
+- reg: Should be the base address and length of the TLMM block.
+- interrupts: Should be the parent IRQ of the TLMM block.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Should be two.
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells : Should be two.
+ The first cell is the gpio pin number and the
+ second cell is used for optional parameters.
+- gpio-ranges: see ../gpio/gpio.txt
+
+Optional properties:
+
+- gpio-reserved-ranges: see ../gpio/gpio.txt
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Qualcomm's pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+ pins, function, bias-disable, bias-pull-down, bias-pull-up, drive-strength,
+ output-low, output-high.
+
+Non-empty subnodes must specify the 'pins' property.
+
+Valid values for qcom,pins are:
+ gpio0-gpio68
+ Supports mux, bias, and drive-strength
+
+ sdc3_clk, sdc3_cmd, sdc3_data
+ Supports bias and drive-strength
+
+
+Valid values for function are:
+ mdio, mi2s, pdm, ssbi, spmi, audio_pcm, gpio, gsbi1, gsbi2, gsbi4, gsbi5,
+ gsbi5_spi_cs1, gsbi5_spi_cs2, gsbi5_spi_cs3, gsbi6, gsbi7, nss_spi, sdc1,
+ spdif, nand, tsif1, tsif2, usb_fs_n, usb_fs, usb2_hsic, rgmii2, sata,
+ pcie1_rst, pcie1_prsnt, pcie1_pwren_n, pcie1_pwren, pcie1_pwrflt,
+ pcie1_clk_req, pcie2_rst, pcie2_prsnt, pcie2_pwren_n, pcie2_pwren,
+ pcie2_pwrflt, pcie2_clk_req, pcie3_rst, pcie3_prsnt, pcie3_pwren_n,
+ pcie3_pwren, pcie3_pwrflt, pcie3_clk_req, ps_hold
+
+Example:
+
+ pinmux: pinctrl@800000 {
+ compatible = "qcom,ipq8064-pinctrl";
+ reg = <0x800000 0x4000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinmux 0 0 69>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 32 0x4>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gsbi5_uart_default>;
+
+ gsbi5_uart_default: gsbi5_uart_default {
+ mux {
+ pins = "gpio18", "gpio19";
+ function = "gsbi5";
+ };
+
+ tx {
+ pins = "gpio18";
+ drive-strength = <4>;
+ bias-disable;
+ };
+
+ rx {
+ pins = "gpio19";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml
new file mode 100644
index 0000000000..e053fbd588
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8074-pinctrl.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,ipq8074-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm IPQ8074 TLMM pin controller
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm IPQ8074 SoC.
+
+properties:
+ compatible:
+ const: qcom,ipq8074-pinctrl
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 35
+
+ gpio-line-names:
+ maxItems: 70
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-ipq8074-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-ipq8074-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-ipq8074-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ pattern: "^gpio([0-9]|[1-6][0-9]|70)$"
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ gpio, atest_char, atest_char0, atest_char1, atest_char2,
+ atest_char3, audio_rxbclk, audio_rxd, audio_rxfsync,
+ audio_rxmclk, audio_txbclk, audio_txd, audio_txfsync,
+ audio_txmclk, blsp0_i2c, blsp0_spi, blsp0_uart, blsp1_i2c,
+ blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi, blsp2_uart,
+ blsp3_i2c, blsp3_spi, blsp3_spi0, blsp3_spi1, blsp3_spi2,
+ blsp3_spi3, blsp3_uart, blsp4_i2c0, blsp4_i2c1, blsp4_spi0,
+ blsp4_spi1, blsp4_uart0, blsp4_uart1, blsp5_i2c, blsp5_spi,
+ blsp5_uart, burn0, burn1, cri_trng, cri_trng0, cri_trng1, cxc0,
+ cxc1, dbg_out, gcc_plltest, gcc_tlmm, ldo_en, ldo_update, led0,
+ led1, led2, mac0_sa0, mac0_sa1, mac1_sa0, mac1_sa1, mac1_sa2,
+ mac1_sa3, mac2_sa0, mac2_sa1, mdc, mdio, pcie0_clk, pcie0_rst,
+ pcie0_wake, pcie1_clk, pcie1_rst, pcie1_wake, pcm_drx, pcm_dtx,
+ pcm_fsync, pcm_pclk, pcm_zsi0, pcm_zsi1, prng_rosc, pta1_0,
+ pta1_1, pta1_2, pta2_0, pta2_1, pta2_2, pwm0, pwm1, pwm2, pwm3,
+ qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, qdss_cti_trig_in_b0,
+ qdss_cti_trig_in_b1, qdss_cti_trig_out_a0,
+ qdss_cti_trig_out_a1, qdss_cti_trig_out_b0,
+ qdss_cti_trig_out_b1, qdss_traceclk_a, qdss_traceclk_b,
+ qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a,
+ qdss_tracedata_b, qpic, rx0, rx1, rx2, sd_card, sd_write,
+ tsens_max, wci2a, wci2b, wci2c, wci2d ]
+
+ required:
+ - pins
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ tlmm: pinctrl@1000000 {
+ compatible = "qcom,ipq8074-pinctrl";
+ reg = <0x01000000 0x300000>;
+ gpio-controller;
+ #gpio-cells = <0x2>;
+ gpio-ranges = <&tlmm 0 0 70>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+
+ serial4-state {
+ pins = "gpio23", "gpio24";
+ function = "blsp4_uart1";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml
new file mode 100644
index 0000000000..e5e9962b21
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,ipq9574-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. IPQ9574 TLMM block
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm IPQ9574 SoC.
+
+properties:
+ compatible:
+ const: qcom,ipq9574-tlmm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 33
+
+ gpio-line-names:
+ maxItems: 65
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-ipq9574-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-ipq9574-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-ipq9574-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ pattern: "^gpio([0-9]|[1-5][0-9]|6[0-4])$"
+ minItems: 1
+ maxItems: 8
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ atest_char, atest_char0, atest_char1, atest_char2, atest_char3,
+ audio_pdm0, audio_pdm1, audio_pri, audio_sec, blsp0_spi, blsp0_uart,
+ blsp1_i2c, blsp1_spi, blsp1_uart, blsp2_i2c, blsp2_spi,
+ blsp2_uart, blsp3_i2c, blsp3_spi, blsp3_uart, blsp4_i2c,
+ blsp4_spi, blsp4_uart, blsp5_i2c, blsp5_uart, cri_trng0,
+ cri_trng1, cri_trng2, cri_trng3, cxc0, cxc1, dbg_out, dwc_ddrphy,
+ gcc_plltest, gcc_tlmm, gpio, mac, mdc, mdio, pcie0_clk, pcie0_wake,
+ pcie1_clk, pcie1_wake, pcie2_clk, pcie2_wake, pcie3_clk, pcie3_wake,
+ prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, pta, pwm,
+ qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, qdss_cti_trig_in_b0,
+ qdss_cti_trig_in_b1, qdss_cti_trig_out_a0, qdss_cti_trig_out_a1,
+ qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a,
+ qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a,
+ qdss_tracedata_b, qspi_clk, qspi_cs, qspi_data,
+ rx0, rx1, sdc_clk, sdc_cmd, sdc_data, sdc_rclk, tsens_max,
+ wci20, wci21, wsa_swrm ]
+
+ required:
+ - pins
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ tlmm: pinctrl@1000000 {
+ compatible = "qcom,ipq9574-tlmm";
+ reg = <0x01000000 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 65>;
+
+ uart2-state {
+ pins = "gpio34", "gpio35";
+ function = "blsp2_uart";
+ drive-strength = <8>;
+ bias-pull-down;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml
new file mode 100644
index 0000000000..2aedb7e7bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,mdm9607-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. MDM9607 TLMM block
+
+maintainers:
+ - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm MDM9607 SoC.
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,mdm9607-tlmm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ gpio-reserved-ranges: true
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-mdm9607-tlmm-state"
+ - patternProperties:
+ ".*":
+ $ref: "#/$defs/qcom-mdm9607-tlmm-state"
+
+$defs:
+ qcom-mdm9607-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([1-9]|[1-7][0-9]|80)$"
+ - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd,
+ sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2,
+ qdsd_data3 ]
+ minItems: 1
+ maxItems: 16
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ adsp_ext, atest_bbrx0, atest_bbrx1, atest_char, atest_char0,
+ atest_char1, atest_char2, atest_char3,
+ atest_combodac_to_gpio_native, atest_gpsadc_dtest0_native,
+ atest_gpsadc_dtest1_native, atest_tsens, backlight_en_b,
+ bimc_dte0, bimc_dte1, blsp1_spi, blsp2_spi, blsp3_spi,
+ blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5,
+ blsp_i2c6, blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi4,
+ blsp_spi5, blsp_spi6, blsp_uart1, blsp_uart2, blsp_uart3,
+ blsp_uart4, blsp_uart5, blsp_uart6, blsp_uim1, blsp_uim2,
+ codec_int, codec_rst, coex_uart, cri_trng, cri_trng0,
+ cri_trng1, dbg_out, ebi0_wrcdc, ebi2_a, ebi2_a_d_8_b,
+ ebi2_lcd, ebi2_lcd_cs_n_b, ebi2_lcd_te_b, eth_irq, eth_rst,
+ gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, gcc_gp2_clk_b,
+ gcc_gp3_clk_a, gcc_gp3_clk_b, gcc_plltest, gcc_tlmm, gmac_mdio,
+ gpio, gsm0_tx, lcd_rst, ldo_en, ldo_update, m_voc, modem_tsync,
+ nav_ptp_pps_in_a, nav_ptp_pps_in_b, nav_tsync_out_a,
+ nav_tsync_out_b, pa_indicator, pbs0, pbs1, pbs2,
+ pri_mi2s_data0_a, pri_mi2s_data1_a, pri_mi2s_mclk_a,
+ pri_mi2s_sck_a, pri_mi2s_ws_a, prng_rosc, ptp_pps_out_a,
+ ptp_pps_out_b, pwr_crypto_enabled_a, pwr_crypto_enabled_b,
+ pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a,
+ pwr_nav_enabled_b, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1,
+ qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, qdss_cti_trig_out_a0,
+ qdss_cti_trig_out_a1, qdss_cti_trig_out_b0, qdss_cti_trig_out_b1,
+ qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a,
+ qdss_tracectl_b, qdss_tracedata_a, qdss_tracedata_b, rcm_marker1,
+ rcm_marker2, sd_write, sec_mi2s, sensor_en, sensor_int2,
+ sensor_int3, sensor_rst, ssbi1, ssbi2, touch_rst, ts_int,
+ uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk,
+ uim2_data, uim2_present, uim2_reset, uim_batt, wlan_en1, ]
+
+ required:
+ - pins
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ tlmm: pinctrl@1000000 {
+ compatible = "qcom,mdm9607-tlmm";
+ reg = <0x01000000 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ gpio-ranges = <&msmgpio 0 0 80>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml
new file mode 100644
index 0000000000..5885aee95c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9615-pinctrl.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,mdm9615-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. MDM9615 TLMM block
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+
+description: Top Level Mode Multiplexer pin controller in Qualcomm MDM9615 SoC.
+
+$ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,mdm9615-pinctrl
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ '#interrupt-cells': true
+ gpio-controller: true
+ '#gpio-cells': true
+ gpio-ranges: true
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-mdm9615-pinctrl-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-mdm9615-pinctrl-state"
+ additionalProperties: false
+
+$defs:
+ qcom-mdm9615-pinctrl-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ pattern: "^gpio([0-9]|[1-7][0-9]|8[0-7])$"
+ minItems: 1
+ maxItems: 16
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ gpio, gsbi2_i2c, gsbi3, gsbi4, gsbi5_i2c, gsbi5_uart,
+ sdc2, ebi2_lcdc, ps_hold, prim_audio, sec_audio, cdc_mclk, ]
+
+ required:
+ - pins
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ tlmm: pinctrl@1000000 {
+ compatible = "qcom,mdm9615-pinctrl";
+ reg = <0x01000000 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ gpio-ranges = <&msmgpio 0 0 88>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ gsbi3-state {
+ pins = "gpio8", "gpio9", "gpio10", "gpio11";
+ function = "gsbi3";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ gsbi5-i2c-state {
+ sda-pins {
+ pins = "gpio16";
+ function = "gsbi5_i2c";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ scl-pins {
+ pins = "gpio17";
+ function = "gsbi5_i2c";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
new file mode 100644
index 0000000000..9efb765095
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8226-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. MSM8226 TLMM block
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm MSM8226 SoC.
+
+properties:
+ compatible:
+ const: qcom,msm8226-pinctrl
+
+ reg:
+ description: Specifies the base address and size of the TLMM register space
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ "#gpio-cells": true
+ gpio-ranges: true
+
+ gpio-reserved-ranges:
+ maxItems: 1
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-msm8226-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-msm8226-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-msm8226-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-6])$"
+ - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins. Functions are only valid for gpio pins.
+ enum: [ gpio, cci_i2c0, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim5,
+ blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5, blsp_spi1,
+ blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2,
+ blsp_uart3, blsp_uart4, blsp_uart5, cam_mclk0, cam_mclk1,
+ gp0_clk, gp1_clk, sdc3, wlan ]
+
+ required:
+ - pins
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ msmgpio: pinctrl@fd510000 {
+ compatible = "qcom,msm8226-pinctrl";
+ reg = <0xfd510000 0x4000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&msmgpio 0 0 117>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+ serial-state {
+ pins = "gpio8", "gpio9";
+ function = "blsp_uart3";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml
new file mode 100644
index 0000000000..a059716117
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.yaml
@@ -0,0 +1,117 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8660-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8660 TLMM pin controller
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm MSM8660 SoC.
+
+properties:
+ compatible:
+ const: qcom,msm8660-pinctrl
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 86
+
+ gpio-line-names:
+ maxItems: 173
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-msm8660-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-msm8660-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-msm8660-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-6][0-9]|17[0-2])$"
+ - enum: [ sdc3_clk, sdc3_cmd, sdc3_data, sdc4_clk, sdc4_cmd, sdc4_data ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ gpio, cam_mclk, dsub, ext_gps, gp_clk_0a, gp_clk_0b, gp_clk_1a,
+ gp_clk_1b, gp_clk_2a, gp_clk_2b, gp_mn, gsbi1, gsbi1_spi_cs1_n,
+ gsbi1_spi_cs2a_n, gsbi1_spi_cs2b_n, gsbi1_spi_cs3_n, gsbi2,
+ gsbi2_spi_cs1_n, gsbi2_spi_cs2_n, gsbi2_spi_cs3_n, gsbi3,
+ gsbi3_spi_cs1_n, gsbi3_spi_cs2_n, gsbi3_spi_cs3_n, gsbi4,
+ gsbi5, gsbi6, gsbi7, gsbi8, gsbi9, gsbi10, gsbi11, gsbi12,
+ hdmi, i2s, lcdc, mdp_vsync, mi2s, pcm, ps_hold, sdc1, sdc2,
+ sdc5, tsif1, tsif2, usb_fs1, usb_fs1_oe_n, usb_fs2,
+ usb_fs2_oe_n, vfe, vsens_alarm, ebi2, ebi2cs ]
+
+ required:
+ - pins
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ tlmm: pinctrl@800000 {
+ compatible = "qcom,msm8660-pinctrl";
+ reg = <0x800000 0x4000>;
+
+ gpio-controller;
+ gpio-ranges = <&tlmm 0 0 173>;
+ #gpio-cells = <2>;
+ interrupts = <0 16 0x4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ gsbi3-i2c-state {
+ pins = "gpio43", "gpio44";
+ function = "gsbi3";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml
new file mode 100644
index 0000000000..5095e86fe9
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8909-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. MSM8909 TLMM block
+
+maintainers:
+ - Stephan Gerhold <stephan@gerhold.net>
+
+description: |
+ Top Level Mode Multiplexer pin controller in Qualcomm MSM8909 SoC.
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,msm8909-tlmm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ gpio-reserved-ranges: true
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-msm8909-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-msm8909-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-msm8909-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-2])$"
+ - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd,
+ sdc2_data, qdsd_clk, qdsd_cmd, qdsd_data0, qdsd_data1,
+ qdsd_data2, qdsd_data3 ]
+ minItems: 1
+ maxItems: 16
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+ enum: [ adsp_ext, atest_bbrx0, atest_bbrx1, atest_char, atest_char0,
+ atest_char1, atest_char2, atest_char3, atest_combodac,
+ atest_gpsadc0, atest_gpsadc1, atest_wlan0, atest_wlan1,
+ bimc_dte0, bimc_dte1, blsp_i2c1, blsp_i2c2, blsp_i2c3,
+ blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_spi1, blsp_spi1_cs1,
+ blsp_spi1_cs2, blsp_spi1_cs3, blsp_spi2, blsp_spi2_cs1,
+ blsp_spi2_cs2, blsp_spi2_cs3, blsp_spi3, blsp_spi3_cs1,
+ blsp_spi3_cs2, blsp_spi3_cs3, blsp_spi4, blsp_spi5, blsp_spi6,
+ blsp_uart1, blsp_uart2, blsp_uim1, blsp_uim2, cam_mclk,
+ cci_async, cci_timer0, cci_timer1, cci_timer2, cdc_pdm0,
+ dbg_out, dmic0_clk, dmic0_data, ebi0_wrcdc, ebi2_a, ebi2_lcd,
+ ext_lpass, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a,
+ gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gcc_plltest, gpio,
+ gsm0_tx, ldo_en, ldo_update, m_voc, mdp_vsync, modem_tsync,
+ nav_pps, nav_tsync, pa_indicator, pbs0, pbs1, pbs2,
+ pri_mi2s_data0_a, pri_mi2s_data0_b, pri_mi2s_data1_a,
+ pri_mi2s_data1_b, pri_mi2s_mclk_a, pri_mi2s_mclk_b,
+ pri_mi2s_sck_a, pri_mi2s_sck_b, pri_mi2s_ws_a, pri_mi2s_ws_b,
+ prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b,
+ pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a,
+ pwr_nav_enabled_b, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1,
+ qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, qdss_cti_trig_out_a0,
+ qdss_cti_trig_out_a1, qdss_cti_trig_out_b0,
+ qdss_cti_trig_out_b1, qdss_traceclk_a, qdss_tracectl_a,
+ qdss_tracedata_a, qdss_tracedata_b, sd_write, sec_mi2s,
+ smb_int, ssbi0, ssbi1, uim1_clk, uim1_data, uim1_present,
+ uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset,
+ uim3_clk, uim3_data, uim3_present, uim3_reset, uim_batt,
+ wcss_bt, wcss_fm, wcss_wlan ]
+
+ required:
+ - pins
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ pinctrl@1000000 {
+ compatible = "qcom,msm8909-tlmm";
+ reg = <0x1000000 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 113>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ gpio-wo-subnode-state {
+ pins = "gpio1";
+ function = "gpio";
+ };
+
+ uart-w-subnodes-state {
+ rx-pins {
+ pins = "gpio4";
+ function = "blsp_uart1";
+ bias-pull-up;
+ };
+
+ tx-pins {
+ pins = "gpio5";
+ function = "blsp_uart1";
+ bias-disable;
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml
new file mode 100644
index 0000000000..063d004967
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8916-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8916 TLMM pin controller
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm MSM8916 SoC.
+
+properties:
+ compatible:
+ const: qcom,msm8916-pinctrl
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 61
+
+ gpio-line-names:
+ maxItems: 122
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-msm8916-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-msm8916-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-msm8916-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-9]|12[01])$"
+ - enum: [ qdsd_clk, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2,
+ qdsd_data3, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk,
+ sdc2_cmd, sdc2_data ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ gpio, adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char,
+ atest_char0, atest_char1, atest_char2, atest_char3,
+ atest_combodac, atest_gpsadc0, atest_gpsadc1, atest_tsens,
+ atest_wlan0, atest_wlan1, backlight_en, bimc_dte0, bimc_dte1,
+ blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5,
+ blsp_i2c6, blsp_spi1, blsp_spi1_cs1, blsp_spi1_cs2,
+ blsp_spi1_cs3, blsp_spi2, blsp_spi2_cs1, blsp_spi2_cs2,
+ blsp_spi2_cs3, blsp_spi3, blsp_spi3_cs1, blsp_spi3_cs2,
+ blsp_spi3_cs3, blsp_spi4, blsp_spi5, blsp_spi6, blsp_uart1,
+ blsp_uart2, blsp_uim1, blsp_uim2, cam1_rst, cam1_standby,
+ cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0,
+ cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out,
+ display_5v, dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc,
+ euro_us, ext_lpass, flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b,
+ gcc_gp2_clk_a, gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b,
+ gsm0_tx0, gsm0_tx1, gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0,
+ kpsns1, kpsns2, ldo_en, ldo_update, mag_int, mdp_vsync,
+ modem_tsync, m_voc, nav_pps, nav_tsync, pa_indicator, pbs0,
+ pbs1, pbs2, pri_mi2s, pri_mi2s_ws, prng_rosc,
+ pwr_crypto_enabled_a, pwr_crypto_enabled_b,
+ pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a,
+ pwr_nav_enabled_b, qdss_ctitrig_in_a0, qdss_ctitrig_in_a1,
+ qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0,
+ qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1,
+ qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a,
+ qdss_tracectl_b, qdss_tracedata_a, qdss_tracedata_b, reset_n,
+ sd_card, sd_write, sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1,
+ uim1, uim2, uim3, uim_batt, wcss_bt, wcss_fm, wcss_wlan,
+ webcam1_rst ]
+
+ required:
+ - pins
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ msmgpio: pinctrl@1000000 {
+ compatible = "qcom,msm8916-pinctrl";
+ reg = <0x01000000 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ gpio-ranges = <&msmgpio 0 0 122>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ blsp1-uart2-sleep-state {
+ pins = "gpio4", "gpio5";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ spi1-default-state {
+ spi-pins {
+ pins = "gpio0", "gpio1", "gpio3";
+ function = "blsp_spi1";
+
+ drive-strength = <12>;
+ bias-disable;
+ };
+
+ cs-pins {
+ pins = "gpio2";
+ function = "gpio";
+
+ drive-strength = <16>;
+ bias-disable;
+ output-high;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml
new file mode 100644
index 0000000000..798aac9e6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8953-pinctrl.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8953-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. MSM8953 TLMM block
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm MSM8953 SoC.
+
+properties:
+ compatible:
+ const: qcom,msm8953-pinctrl
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ gpio-reserved-ranges: true
+ "#gpio-cells": true
+ gpio-ranges: true
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-msm8953-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-msm8953-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-msm8953-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[01])$"
+ - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk,
+ sdc2_cmd, sdc2_data, qdsd_clk, qdsd_cmd, qdsd_data0,
+ qdsd_data1, qdsd_data2, qdsd_data3 ]
+ minItems: 1
+ maxItems: 16
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ accel_int, adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1,
+ atest_char, atest_char0, atest_char1, atest_char2, atest_char3,
+ atest_gpsadc_dtest0_native, atest_gpsadc_dtest1_native, atest_tsens,
+ atest_wlan0, atest_wlan1, bimc_dte0, bimc_dte1, blsp1_spi,
+ blsp3_spi, blsp6_spi, blsp7_spi, blsp_i2c1, blsp_i2c2, blsp_i2c3,
+ blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8, blsp_spi1,
+ blsp_spi2, blsp_spi3, blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7,
+ blsp_spi8, blsp_uart2, blsp_uart4, blsp_uart5, blsp_uart6, cam0_ldo,
+ cam1_ldo, cam1_rst, cam1_standby, cam2_rst, cam2_standby, cam3_rst,
+ cam3_standby, cam_irq, cam_mclk, cap_int, cci_async, cci_i2c,
+ cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
+ cdc_pdm0, codec_int1, codec_int2, codec_reset, cri_trng, cri_trng0,
+ cri_trng1, dac_calib0, dac_calib1, dac_calib10, dac_calib11,
+ dac_calib12, dac_calib13, dac_calib14, dac_calib15, dac_calib16,
+ dac_calib17, dac_calib18, dac_calib19, dac_calib2, dac_calib20,
+ dac_calib21, dac_calib22, dac_calib23, dac_calib24, dac_calib25,
+ dac_calib3, dac_calib4, dac_calib5, dac_calib6, dac_calib7,
+ dac_calib8, dac_calib9, dbg_out, ddr_bist, dmic0_clk, dmic0_data,
+ ebi_cdc, ebi_ch0, ext_lpass, flash_strobe, fp_int, gcc_gp1_clk_a,
+ gcc_gp1_clk_b, gcc_gp2_clk_a, gcc_gp2_clk_b, gcc_gp3_clk_a,
+ gcc_gp3_clk_b, gcc_plltest, gcc_tlmm, gpio, gsm0_tx, gsm1_tx,
+ gyro_int, hall_int, hdmi_int, key_focus, key_home, key_snapshot,
+ key_volp, ldo_en, ldo_update, lpass_slimbus, lpass_slimbus0,
+ lpass_slimbus1, m_voc, mag_int, mdp_vsync, mipi_dsi0, modem_tsync,
+ mss_lte, nav_pps, nav_pps_in_a, nav_pps_in_b, nav_tsync,
+ nfc_disable, nfc_dwl, nfc_irq, ois_sync, pa_indicator, pbs0, pbs1,
+ pbs2, pressure_int, pri_mi2s, pri_mi2s_mclk_a, pri_mi2s_mclk_b,
+ pri_mi2s_ws, prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b,
+ pwr_down, pwr_modem_enabled_a, pwr_modem_enabled_b,
+ pwr_nav_enabled_a, pwr_nav_enabled_b, qdss_cti_trig_in_a0,
+ qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, qdss_cti_trig_in_b1,
+ qdss_cti_trig_out_a0, qdss_cti_trig_out_a1, qdss_cti_trig_out_b0,
+ qdss_cti_trig_out_b1, qdss_traceclk_a, qdss_traceclk_b,
+ qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a,
+ qdss_tracedata_b, sd_write, sdcard_det, sec_mi2s, sec_mi2s_mclk_a,
+ sec_mi2s_mclk_b, smb_int, ss_switch, ssbi_wtr1, ts_resout,
+ ts_sample, ts_xvdd, tsens_max, uim1_clk, uim1_data, uim1_present,
+ uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset,
+ uim_batt, us_emitter, us_euro, wcss_bt, wcss_fm, wcss_wlan,
+ wcss_wlan0, wcss_wlan1, wcss_wlan2, wsa_en, wsa_io, wsa_irq ]
+
+ required:
+ - pins
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ tlmm: pinctrl@1000000 {
+ compatible = "qcom,msm8953-pinctrl";
+ reg = <0x01000000 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 142>;
+
+ serial_default: serial-state {
+ pins = "gpio4", "gpio5";
+ function = "blsp_uart2";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml
new file mode 100644
index 0000000000..9172b50f7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.yaml
@@ -0,0 +1,157 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8960-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8960 TLMM pin controller
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm MSM8960 SoC.
+
+properties:
+ compatible:
+ const: qcom,msm8960-pinctrl
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 76
+
+ gpio-line-names:
+ maxItems: 152
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-msm8960-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-msm8960-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-msm8960-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-1])$"
+ - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc3_clk, sdc3_cmd,
+ sdc3_data ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ gpio, audio_pcm, bt, cam_mclk0, cam_mclk1, cam_mclk2,
+ codec_mic_i2s, codec_spkr_i2s, ext_gps, fm, gps_blanking,
+ gps_pps_in, gps_pps_out, gp_clk_0a, gp_clk_0b, gp_clk_1a,
+ gp_clk_1b, gp_clk_2a, gp_clk_2b, gp_mn, gp_pdm_0a, gp_pdm_0b,
+ gp_pdm_1a, gp_pdm_1b, gp_pdm_2a, gp_pdm_2b, gsbi1,
+ gsbi1_spi_cs1_n, gsbi1_spi_cs2a_n, gsbi1_spi_cs2b_n,
+ gsbi1_spi_cs3_n, gsbi2, gsbi2_spi_cs1_n, gsbi2_spi_cs2_n,
+ gsbi2_spi_cs3_n, gsbi3, gsbi4, gsbi4_3d_cam_i2c_l,
+ gsbi4_3d_cam_i2c_r, gsbi5, gsbi5_3d_cam_i2c_l,
+ gsbi5_3d_cam_i2c_r, gsbi6, gsbi7, gsbi8, gsbi9, gsbi10, gsbi11,
+ gsbi11_spi_cs1a_n, gsbi11_spi_cs1b_n, gsbi11_spi_cs2a_n,
+ gsbi11_spi_cs2b_n, gsbi11_spi_cs3_n, gsbi12, hdmi_cec,
+ hdmi_ddc_clock, hdmi_ddc_data, hdmi_hot_plug_detect, hsic,
+ mdp_vsync, mi2s, mic_i2s, pmb_clk, pmb_ext_ctrl, ps_hold,
+ rpm_wdog, sdc2, sdc4, sdc5, slimbus1, slimbus2, spkr_i2s,
+ ssbi1, ssbi2, ssbi_ext_gps, ssbi_pmic2, ssbi_qpa1, ssbi_ts,
+ tsif1, tsif2, ts_eoc, usb_fs1, usb_fs1_oe, usb_fs1_oe_n,
+ usb_fs2, usb_fs2_oe, usb_fs2_oe_n, vfe_camif_timer1_a,
+ vfe_camif_timer1_b, vfe_camif_timer2, vfe_camif_timer3_a,
+ vfe_camif_timer3_b, vfe_camif_timer4_a, vfe_camif_timer4_b,
+ vfe_camif_timer4_c, vfe_camif_timer5_a, vfe_camif_timer5_b,
+ vfe_camif_timer6_a, vfe_camif_timer6_b, vfe_camif_timer6_c,
+ vfe_camif_timer7_a, vfe_camif_timer7_b, vfe_camif_timer7_c,
+ wlan ]
+
+ required:
+ - pins
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ msmgpio: pinctrl@800000 {
+ compatible = "qcom,msm8960-pinctrl";
+ reg = <0x800000 0x4000>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&msmgpio 0 0 152>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ spi1-default-state {
+ mosi-pins {
+ pins = "gpio6";
+ function = "gsbi1";
+ drive-strength = <12>;
+ bias-disable;
+ };
+
+ miso-pins {
+ pins = "gpio7";
+ function = "gsbi1";
+ drive-strength = <12>;
+ bias-disable;
+ };
+
+ cs-pins {
+ pins = "gpio8";
+ function = "gpio";
+ drive-strength = <12>;
+ bias-disable;
+ output-low;
+ };
+
+ clk-pins {
+ pins = "gpio9";
+ function = "gsbi1";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml
new file mode 100644
index 0000000000..8a3be65c51
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.yaml
@@ -0,0 +1,172 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8974-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8974 TLMM pin controller
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm MSM8974 SoC.
+
+properties:
+ compatible:
+ const: qcom,msm8974-pinctrl
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 73
+
+ gpio-line-names:
+ maxItems: 146
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-msm8974-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-msm8974-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-msm8974-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[0-5])$"
+ - enum: [ hsic_data, hsic_strobe, sdc1_clk, sdc1_cmd, sdc1_data,
+ sdc2_clk, sdc2_cmd, sdc2_data ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ gpio, cci_i2c0, cci_i2c1, uim1, uim2, uim_batt_alarm,
+ blsp_uim1, blsp_uart1, blsp_i2c1, blsp_spi1, blsp_uim2,
+ blsp_uart2, blsp_i2c2, blsp_spi2, blsp_uim3, blsp_uart3,
+ blsp_i2c3, blsp_spi3, blsp_uim4, blsp_uart4, blsp_i2c4,
+ blsp_spi4, blsp_uim5, blsp_uart5, blsp_i2c5, blsp_spi5,
+ blsp_uim6, blsp_uart6, blsp_i2c6, blsp_spi6, blsp_uim7,
+ blsp_uart7, blsp_i2c7, blsp_spi7, blsp_uim8, blsp_uart8,
+ blsp_i2c8, blsp_spi8, blsp_uim9, blsp_uart9, blsp_i2c9,
+ blsp_spi9, blsp_uim10, blsp_uart10, blsp_i2c10, blsp_spi10,
+ blsp_uim11, blsp_uart11, blsp_i2c11, blsp_spi11, blsp_uim12,
+ blsp_uart12, blsp_i2c12, blsp_spi12, blsp_spi1_cs1,
+ blsp_spi2_cs2, blsp_spi_cs3, blsp_spi2_cs1, blsp_spi2_cs2
+ blsp_spi2_cs3, blsp_spi10_cs1, blsp_spi10_cs2, blsp_spi10_cs3,
+ sdc3, sdc4, gcc_gp_clk1, gcc_gp_clk2, gcc_gp_clk3, cci_timer0,
+ cci_timer1, cci_timer2, cci_timer3, cci_async_in0,
+ cci_async_in1, cci_async_in2, cam_mckl0, cam_mclk1, cam_mclk2,
+ cam_mclk3, mdp_vsync, hdmi_cec, hdmi_ddc, hdmi_hpd, edp_hpd,
+ gp_pdm0, gp_pdm1, gp_pdm2, gp_pdm3, gp0_clk, gp1_clk, gp_mn,
+ tsif1, tsif2, hsic, grfc, audio_ref_clk, qua_mi2s, pri_mi2s,
+ spkr_mi2s, ter_mi2s, sec_mi2s, bt, fm, wlan, slimbus, hsic_ctl ]
+
+ required:
+ - pins
+
+ allOf:
+ - if:
+ properties:
+ pins:
+ contains:
+ enum:
+ - hsic_data
+ - hsic_strobe
+ required:
+ - pins
+ then:
+ properties:
+ bias-pull-down: false
+ bias-pull-up: false
+ bias-disable: false
+ drive-strength: false
+ input-enable: false
+ output-high: false
+ output-low: false
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ tlmm: pinctrl@fd510000 {
+ compatible = "qcom,msm8974-pinctrl";
+ reg = <0xfd510000 0x4000>;
+ gpio-controller;
+ gpio-ranges = <&tlmm 0 0 146>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+ sdc1-off-state {
+ clk-pins {
+ pins = "sdc1_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ cmd-pins {
+ pins = "sdc1_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ data-pins {
+ pins = "sdc1_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ blsp2-uart1-sleep-state {
+ pins = "gpio41", "gpio42", "gpio43", "gpio44";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ hsic-state {
+ pins = "hsic_data", "hsic_strobe";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml
new file mode 100644
index 0000000000..ca95de0b87
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8976-pinctrl.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8976-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8976 TLMM pin controller
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm MSM8976 SoC.
+
+properties:
+ compatible:
+ const: qcom,msm8976-pinctrl
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 73
+
+ gpio-line-names:
+ maxItems: 145
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-msm8976-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-msm8976-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-msm8976-tlmm-state:
+ type: object
+ description:
+ Desired pin configuration for a device or its specific state (like sleep
+ or active).
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this state.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[0-4])$"
+ - enum: [ qdsd_clk, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2,
+ qdsd_data3, sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk,
+ sdc2_clk, sdc2_cmd, sdc2_data ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ gpio, blsp_uart1, blsp_spi1, smb_int, blsp_i2c1, blsp_spi2,
+ blsp_uart2, blsp_i2c2, gcc_gp1_clk_b, blsp_spi3,
+ qdss_tracedata_b, blsp_i2c3, gcc_gp2_clk_b, gcc_gp3_clk_b,
+ blsp_spi4, cap_int, blsp_i2c4, blsp_spi5, blsp_uart5,
+ qdss_traceclk_a, m_voc, blsp_i2c5, qdss_tracectl_a,
+ qdss_tracedata_a, blsp_spi6, blsp_uart6, qdss_tracectl_b,
+ blsp_i2c6, qdss_traceclk_b, mdp_vsync, pri_mi2s_mclk_a,
+ sec_mi2s_mclk_a, cam_mclk, cci0_i2c, cci1_i2c, blsp1_spi,
+ blsp3_spi, gcc_gp1_clk_a, gcc_gp2_clk_a, gcc_gp3_clk_a,
+ uim_batt, sd_write, uim1_data, uim1_clk, uim1_reset,
+ uim1_present, uim2_data, uim2_clk, uim2_reset, uim2_present,
+ ts_xvdd, mipi_dsi0, us_euro, ts_resout, ts_sample,
+ sec_mi2s_mclk_b, pri_mi2s, codec_reset, cdc_pdm0, us_emitter,
+ pri_mi2s_mclk_b, pri_mi2s_mclk_c, lpass_slimbus,
+ lpass_slimbus0, lpass_slimbus1, codec_int1, codec_int2,
+ wcss_bt, sdc3, wcss_wlan2, wcss_wlan1, wcss_wlan0, wcss_wlan,
+ wcss_fm, key_volp, key_snapshot, key_focus, key_home, pwr_down,
+ dmic0_clk, hdmi_int, dmic0_data, wsa_vi, wsa_en, blsp_spi8,
+ wsa_irq, blsp_i2c8, pa_indicator, modem_tsync, ssbi_wtr1,
+ gsm1_tx, gsm0_tx, sdcard_det, sec_mi2s, ss_switch ]
+
+ required:
+ - pins
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ tlmm: pinctrl@1000000 {
+ compatible = "qcom,msm8976-pinctrl";
+ reg = <0x1000000 0x300000>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&tlmm 0 0 145>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ blsp1-uart2-active-state {
+ pins = "gpio4", "gpio5", "gpio6", "gpio7";
+ function = "blsp_uart2";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml
new file mode 100644
index 0000000000..41525ecfa8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8994-pinctrl.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8994-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8994 TLMM pin controller
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm MSM8994 SoC.
+
+properties:
+ compatible:
+ enum:
+ - qcom,msm8992-pinctrl
+ - qcom,msm8994-pinctrl
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 73
+
+ gpio-line-names:
+ maxItems: 146
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-msm8994-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-msm8994-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-msm8994-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[0-5])$"
+ - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk,
+ sdc2_cmd, sdc2_data, sdc3_clk, sdc3_cmd, sdc3_data ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ gpio, audio_ref_clk, blsp_i2c1, blsp_i2c2, blsp_i2c3,
+ blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8,
+ blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12, blsp_spi1,
+ blsp_spi1_cs1, blsp_spi1_cs2, blsp_spi1_cs3, blsp_spi2,
+ blsp_spi2_cs1, blsp_spi2_cs2, blsp_spi2_cs3, blsp_spi3,
+ blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7, blsp_spi8,
+ blsp_spi9, blsp_spi10, blsp_spi10_cs1, blsp_spi10_cs2,
+ blsp_spi10_cs3, blsp_spi11, blsp_spi12, blsp_uart1, blsp_uart2,
+ blsp_uart3, blsp_uart4, blsp_uart5, blsp_uart6, blsp_uart7,
+ blsp_uart8, blsp_uart9, blsp_uart10, blsp_uart11, blsp_uart12,
+ blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim4, blsp_uim5,
+ blsp_uim6, blsp_uim7, blsp_uim8, blsp_uim9, blsp_uim10,
+ blsp_uim11, blsp_uim12, blsp11_i2c_scl_b, blsp11_i2c_sda_b,
+ blsp11_uart_rx_b, blsp11_uart_tx_b, cam_mclk0, cam_mclk1,
+ cam_mclk2, cam_mclk3, cci_async_in0, cci_async_in1,
+ cci_async_in2, cci_i2c0, cci_i2c1, cci_timer0, cci_timer1,
+ cci_timer2, cci_timer3, cci_timer4, gcc_gp1_clk_a,
+ gcc_gp1_clk_b, gcc_gp2_clk_a, gcc_gp2_clk_b, gcc_gp3_clk_a,
+ gcc_gp3_clk_b, gp_mn, gp_pdm0, gp_pdm1, gp_pdm2, gp0_clk,
+ gp1_clk, gps_tx, gsm_tx, hdmi_cec, hdmi_ddc, hdmi_hpd,
+ hdmi_rcv, mdp_vsync, mss_lte, nav_pps, nav_tsync,
+ qdss_cti_trig_in_a, qdss_cti_trig_in_b, qdss_cti_trig_in_c,
+ qdss_cti_trig_in_d, qdss_cti_trig_out_a, qdss_cti_trig_out_b,
+ qdss_cti_trig_out_c, qdss_cti_trig_out_d, qdss_traceclk_a,
+ qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b,
+ qdss_tracedata_a, qdss_tracedata_b, qua_mi2s, pci_e0, pci_e1,
+ pri_mi2s, sdc4, sec_mi2s, slimbus, spkr_i2s, ter_mi2s, tsif1,
+ tsif2, uim_batt_alarm, uim1, uim2, uim3, uim4 ]
+
+ required:
+ - pins
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ tlmm: pinctrl@fd510000 {
+ compatible = "qcom,msm8994-pinctrl";
+ reg = <0xfd510000 0x4000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ gpio-ranges = <&tlmm 0 0 146>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ blsp1-uart2-default-state {
+ function = "blsp_uart2";
+ pins = "gpio4", "gpio5";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ blsp1-spi1-default-state {
+ default-pins {
+ pins = "gpio0", "gpio1", "gpio3";
+ function = "blsp_spi1";
+ drive-strength = <10>;
+ bias-pull-down;
+ };
+
+ cs-pins {
+ pins = "gpio8";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml
new file mode 100644
index 0000000000..59d406b609
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.yaml
@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8996-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8996 TLMM pin controller
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm MSM8996 SoC.
+
+properties:
+ compatible:
+ const: qcom,msm8996-pinctrl
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 75
+
+ gpio-line-names:
+ maxItems: 150
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-msm8996-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-msm8996-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-msm8996-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$"
+ - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk,
+ sdc2_cmd, sdc2_data ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ gpio, blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens,
+ bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8,
+ qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b,
+ dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10,
+ blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12,
+ mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11,
+ atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio,
+ atest_char, cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8,
+ qdss_tracedata_b, pll_reset, qdss_stm6, qdss_stm5, qdss_stm4,
+ atest_usb2, cci_i2c, qdss_stm3, dac_calib3, atest_usb23,
+ atest_char3, dac_calib4, qdss_stm2, atest_usb22, atest_char2,
+ qdss_stm1, dac_calib5, atest_usb21, atest_char1, dbg_out,
+ qdss_stm0, dac_calib6, atest_usb20, atest_char0, dac_calib10,
+ qdss_stm10, qdss_cti_trig_in_a, cci_timer4, blsp_spi6,
+ blsp_uart6, blsp_uim6, blsp2_spi, qdss_stm9,
+ qdss_cti_trig_out_a, dac_calib11, qdss_stm8, cci_timer0,
+ qdss_stm13, dac_calib7, cci_timer1, qdss_stm12, dac_calib8,
+ cci_timer2, blsp1_spi, qdss_stm11, dac_calib9, cci_timer3,
+ cci_async, dac_calib12, blsp_i2c6, qdss_tracectl_a,
+ dac_calib13, qdss_traceclk_a, dac_calib14, dac_calib15,
+ hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem, dac_calib17,
+ hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto, dac_calib19,
+ hdmi_hot, dac_calib20, dac_calib21, pci_e0, dac_calib22,
+ dac_calib23, dac_calib24, tsif1_sync, dac_calib25, sd_write,
+ tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2, qdss_cti,
+ blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3, uim3,
+ blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9,
+ blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7,
+ qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11,
+ blsp_uart11, blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a,
+ blsp_i2c11, cri_trng0, cri_trng1, cri_trng, qdss_stm18,
+ pri_mi2s, qdss_stm17, blsp_spi4, blsp_uart4, blsp_uim4,
+ qdss_stm16, qdss_stm15, blsp_i2c4, qdss_stm14, dac_calib26,
+ spkr_i2s, audio_ref, lpass_slimbus, isense_dbg, tsense_pwm1,
+ tsense_pwm2, btfm_slimbus, ter_mi2s, qdss_stm22, qdss_stm21,
+ qdss_stm20, qdss_stm19, gcc_gp1_clk_b, sec_mi2s, blsp_spi5,
+ blsp_uart5, blsp_uim5, gcc_gp2_clk_b, gcc_gp3_clk_b, blsp_i2c5,
+ blsp_spi12, blsp_uart12, blsp_uim12, qdss_stm25, qdss_stm31,
+ blsp_i2c12, qdss_stm30, qdss_stm29, tsif1_clk, qdss_stm28,
+ tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27, qdss_traceclk_b,
+ tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk, sdc4_clk,
+ qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b,
+ sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b,
+ ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b,
+ blsp11_uart_rx_b, blsp11_i2c_sda_b, prng_rosc,
+ blsp11_i2c_scl_b, uim2, uim1, uim_batt, pci_e2, pa_indicator,
+ adsp_ext, ddr_bist, qdss_tracedata_11, qdss_tracedata_12,
+ modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx, qspi_cs, ssbi2,
+ ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3 ]
+
+ required:
+ - pins
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ tlmm: pinctrl@1010000 {
+ compatible = "qcom,msm8996-pinctrl";
+ reg = <0x01010000 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ gpio-ranges = <&tlmm 0 0 150>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ blsp1-spi1-default-state {
+ spi-pins {
+ pins = "gpio0", "gpio1", "gpio3";
+ function = "blsp_spi1";
+ drive-strength = <12>;
+ bias-disable;
+ };
+
+ cs-pins {
+ pins = "gpio2";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ blsp1-spi1-sleep-state {
+ pins = "gpio0", "gpio1", "gpio2", "gpio3";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml
new file mode 100644
index 0000000000..bd6d7caf49
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8998-pinctrl.yaml
@@ -0,0 +1,164 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8998-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM8998 TLMM pin controller
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm MSM8998 SoC.
+
+properties:
+ compatible:
+ const: qcom,msm8998-pinctrl
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 75
+
+ gpio-line-names:
+ maxItems: 150
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-msm8998-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-msm8998-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-msm8998-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$"
+ - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ gpio, adsp_ext, agera_pll, atest_char, atest_gpsadc0,
+ atest_gpsadc1, atest_tsens, atest_tsens2, atest_usb1,
+ atest_usb10, atest_usb11, atest_usb12, atest_usb13, audio_ref,
+ bimc_dte0, bimc_dte1, blsp10_spi, blsp10_spi_a, blsp10_spi_b,
+ blsp11_i2c, blsp1_spi, blsp1_spi_a, blsp1_spi_b, blsp2_spi,
+ blsp9_spi, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4,
+ blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8, blsp_i2c9,
+ blsp_i2c10, blsp_i2c11, blsp_i2c12, blsp_spi1, blsp_spi2,
+ blsp_spi3, blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7,
+ blsp_spi8, blsp_spi9, blsp_spi10, blsp_spi11, blsp_spi12,
+ blsp_uart1_a, blsp_uart1_b, blsp_uart2_a, blsp_uart2_b,
+ blsp_uart3_a, blsp_uart3_b, blsp_uart7_a, blsp_uart7_b,
+ blsp_uart8, blsp_uart8_a, blsp_uart8_b, blsp_uart9_a,
+ blsp_uart9_b, blsp_uim1_a, blsp_uim1_b, blsp_uim2_a,
+ blsp_uim2_b, blsp_uim3_a, blsp_uim3_b, blsp_uim7_a,
+ blsp_uim7_b, blsp_uim8_a, blsp_uim8_b, blsp_uim9_a,
+ blsp_uim9_b, bt_reset, btfm_slimbus, cam_mclk, cci_async,
+ cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3,
+ cci_timer4, cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist,
+ edp_hot, edp_lcd, gcc_gp1_a, gcc_gp1_b, gcc_gp2_a, gcc_gp2_b,
+ gcc_gp3_a, gcc_gp3_b, hdmi_cec, hdmi_ddc, hdmi_hot, hdmi_rcv,
+ isense_dbg, jitter_bist, ldo_en, ldo_update, lpass_slimbus,
+ m_voc, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
+ mdp_vsync3, mdp_vsync_a, mdp_vsync_b, modem_tsync, mss_lte,
+ nav_dr, nav_pps, pa_indicator, pci_e0, phase_flag,
+ pll_bypassnl, pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc,
+ pwr_crypto, pwr_modem, pwr_nav, qdss_cti0_a, qdss_cti0_b,
+ qdss_cti1_a, qdss_cti1_b, qdss, qlink_enable, qlink_request,
+ qua_mi2s, sd_card, sd_write, sdc40, sdc41, sdc42, sdc43,
+ sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, spkr_i2s, ssbi1, ssc_irq,
+ ter_mi2s, tgu_ch0, tgu_ch1, tsense_pwm1, tsense_pwm2, tsif0,
+ tsif1, uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk,
+ uim2_data, uim2_present, uim2_reset, uim_batt, usb_phy, vfr_1,
+ vsense_clkout, vsense_data0, vsense_data1, vsense_mode,
+ wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1 ]
+
+ required:
+ - pins
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ tlmm: pinctrl@3400000 {
+ compatible = "qcom,msm8998-pinctrl";
+ reg = <0x03400000 0xc00000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-ranges = <&tlmm 0 0 150>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-reserved-ranges = <0 4>, <81 4>;
+
+ sdc2-off-state {
+ clk-pins {
+ pins = "sdc2_clk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cmd-pins {
+ pins = "sdc2_cmd";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ data-pins {
+ pins = "sdc2_data";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ sdc2-cd-state {
+ pins = "gpio95";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
new file mode 100644
index 0000000000..3f8ad07c7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
@@ -0,0 +1,572 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,pmic-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PMIC GPIO block
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+ This binding describes the GPIO block(s) found in the 8xxx series of
+ PMIC's from Qualcomm.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - qcom,pm2250-gpio
+ - qcom,pm660-gpio
+ - qcom,pm660l-gpio
+ - qcom,pm6125-gpio
+ - qcom,pm6150-gpio
+ - qcom,pm6150l-gpio
+ - qcom,pm6350-gpio
+ - qcom,pm7250b-gpio
+ - qcom,pm7325-gpio
+ - qcom,pm7550ba-gpio
+ - qcom,pm8005-gpio
+ - qcom,pm8008-gpio
+ - qcom,pm8018-gpio
+ - qcom,pm8019-gpio
+ - qcom,pm8038-gpio
+ - qcom,pm8058-gpio
+ - qcom,pm8150-gpio
+ - qcom,pm8150b-gpio
+ - qcom,pm8150l-gpio
+ - qcom,pm8226-gpio
+ - qcom,pm8350-gpio
+ - qcom,pm8350b-gpio
+ - qcom,pm8350c-gpio
+ - qcom,pm8450-gpio
+ - qcom,pm8550-gpio
+ - qcom,pm8550b-gpio
+ - qcom,pm8550ve-gpio
+ - qcom,pm8550vs-gpio
+ - qcom,pm8916-gpio
+ - qcom,pm8917-gpio
+ - qcom,pm8921-gpio
+ - qcom,pm8941-gpio
+ - qcom,pm8950-gpio
+ - qcom,pm8953-gpio
+ - qcom,pm8994-gpio
+ - qcom,pm8998-gpio
+ - qcom,pma8084-gpio
+ - qcom,pmc8180-gpio
+ - qcom,pmc8180c-gpio
+ - qcom,pmi632-gpio
+ - qcom,pmi8950-gpio
+ - qcom,pmi8994-gpio
+ - qcom,pmi8998-gpio
+ - qcom,pmk8350-gpio
+ - qcom,pmk8550-gpio
+ - qcom,pmm8155au-gpio
+ - qcom,pmm8654au-gpio
+ - qcom,pmp8074-gpio
+ - qcom,pmr735a-gpio
+ - qcom,pmr735b-gpio
+ - qcom,pmr735d-gpio
+ - qcom,pms405-gpio
+ - qcom,pmx55-gpio
+ - qcom,pmx65-gpio
+ - qcom,pmx75-gpio
+
+ - enum:
+ - qcom,spmi-gpio
+ - qcom,ssbi-gpio
+
+ reg:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+ gpio-controller: true
+
+ gpio-ranges:
+ maxItems: 1
+
+ gpio-line-names:
+ minItems: 2
+ maxItems: 44
+
+ gpio-reserved-ranges:
+ minItems: 1
+ # maxItems as half of total number of GPIOs, as there has to be at
+ # least one usable GPIO between each reserved range.
+ maxItems: 22
+
+ '#gpio-cells':
+ const: 2
+ description:
+ The first cell will be used to define gpio number and the
+ second denotes the flags for this gpio
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+ - interrupt-controller
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm8008-gpio
+ - qcom,pmi8950-gpio
+ - qcom,pmr735d-gpio
+ then:
+ properties:
+ gpio-line-names:
+ minItems: 2
+ maxItems: 2
+ gpio-reserved-ranges:
+ maxItems: 1
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm8005-gpio
+ - qcom,pm8450-gpio
+ - qcom,pm8916-gpio
+ - qcom,pmk8350-gpio
+ - qcom,pmr735a-gpio
+ - qcom,pmr735b-gpio
+ then:
+ properties:
+ gpio-line-names:
+ minItems: 4
+ maxItems: 4
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 2
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm8018-gpio
+ - qcom,pm8019-gpio
+ - qcom,pm8550vs-gpio
+ - qcom,pmk8550-gpio
+ then:
+ properties:
+ gpio-line-names:
+ minItems: 6
+ maxItems: 6
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 3
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm7550ba-gpio
+ - qcom,pm8226-gpio
+ - qcom,pm8350b-gpio
+ - qcom,pm8550ve-gpio
+ - qcom,pm8950-gpio
+ - qcom,pm8953-gpio
+ - qcom,pmi632-gpio
+ then:
+ properties:
+ gpio-line-names:
+ minItems: 8
+ maxItems: 8
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 4
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm6350-gpio
+ - qcom,pm8350c-gpio
+ then:
+ properties:
+ gpio-line-names:
+ minItems: 9
+ maxItems: 9
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 5
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm2250-gpio
+ - qcom,pm6150-gpio
+ - qcom,pm7325-gpio
+ - qcom,pm8150-gpio
+ - qcom,pm8350-gpio
+ - qcom,pmc8180-gpio
+ - qcom,pmi8994-gpio
+ - qcom,pmm8155au-gpio
+ then:
+ properties:
+ gpio-line-names:
+ minItems: 10
+ maxItems: 10
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 5
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pmx55-gpio
+ then:
+ properties:
+ gpio-line-names:
+ minItems: 11
+ maxItems: 11
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 6
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm660l-gpio
+ - qcom,pm6150l-gpio
+ - qcom,pm7250b-gpio
+ - qcom,pm8038-gpio
+ - qcom,pm8150b-gpio
+ - qcom,pm8150l-gpio
+ - qcom,pm8550-gpio
+ - qcom,pm8550b-gpio
+ - qcom,pmc8180c-gpio
+ - qcom,pmp8074-gpio
+ - qcom,pms405-gpio
+ then:
+ properties:
+ gpio-line-names:
+ minItems: 12
+ maxItems: 12
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 6
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm660-gpio
+ then:
+ properties:
+ gpio-line-names:
+ minItems: 13
+ maxItems: 13
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 7
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pmi8998-gpio
+ then:
+ properties:
+ gpio-line-names:
+ minItems: 14
+ maxItems: 14
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 7
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pmx65-gpio
+ - qcom,pmx75-gpio
+ then:
+ properties:
+ gpio-line-names:
+ minItems: 16
+ maxItems: 16
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 8
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm8994-gpio
+ - qcom,pma8084-gpio
+ then:
+ properties:
+ gpio-line-names:
+ minItems: 22
+ maxItems: 22
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 11
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm8998-gpio
+ then:
+ properties:
+ gpio-line-names:
+ minItems: 26
+ maxItems: 26
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 13
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm8941-gpio
+ then:
+ properties:
+ gpio-line-names:
+ minItems: 36
+ maxItems: 36
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 18
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm8917-gpio
+ then:
+ properties:
+ gpio-line-names:
+ minItems: 38
+ maxItems: 38
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 19
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm8058-gpio
+ - qcom,pm8921-gpio
+ then:
+ properties:
+ gpio-line-names:
+ minItems: 44
+ maxItems: 44
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 22
+
+patternProperties:
+ '-state$':
+ oneOf:
+ - $ref: "#/$defs/qcom-pmic-gpio-state"
+ - patternProperties:
+ "(pinconf|-pins)$":
+ $ref: "#/$defs/qcom-pmic-gpio-state"
+ additionalProperties: false
+
+$defs:
+ qcom-pmic-gpio-state:
+ type: object
+ allOf:
+ - $ref: pinmux-node.yaml
+ - $ref: pincfg-node.yaml
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in
+ this subnode. Valid pins are
+ - gpio1-gpio9 for pm6125
+ - gpio1-gpio10 for pm6150
+ - gpio1-gpio12 for pm6150l
+ - gpio1-gpio9 for pm6350
+ - gpio1-gpio12 for pm7250b
+ - gpio1-gpio10 for pm7325
+ - gpio1-gpio8 for pm7550ba
+ - gpio1-gpio4 for pm8005
+ - gpio1-gpio2 for pm8008
+ - gpio1-gpio6 for pm8018
+ - gpio1-gpio12 for pm8038
+ - gpio1-gpio40 for pm8058
+ - gpio1-gpio10 for pm8150 (holes on gpio2, gpio5,
+ gpio7 and gpio8)
+ - gpio1-gpio12 for pm8150b (holes on gpio3, gpio4
+ and gpio7)
+ - gpio1-gpio12 for pm8150l (hole on gpio7)
+ - gpio1-gpio4 for pm8916
+ - gpio1-gpio10 for pm8350
+ - gpio1-gpio8 for pm8350b
+ - gpio1-gpio9 for pm8350c
+ - gpio1-gpio4 for pm8450
+ - gpio1-gpio12 for pm8550
+ - gpio1-gpio12 for pm8550b
+ - gpio1-gpio8 for pm8550ve
+ - gpio1-gpio6 for pm8550vs
+ - gpio1-gpio38 for pm8917
+ - gpio1-gpio44 for pm8921
+ - gpio1-gpio36 for pm8941
+ - gpio1-gpio8 for pm8950 (hole on gpio3)
+ - gpio1-gpio8 for pm8953 (hole on gpio3 and gpio6)
+ - gpio1-gpio22 for pm8994
+ - gpio1-gpio26 for pm8998
+ - gpio1-gpio22 for pma8084
+ - gpio1-gpio8 for pmi632
+ - gpio1-gpio2 for pmi8950
+ - gpio1-gpio10 for pmi8994
+ - gpio1-gpio4 for pmk8350
+ - gpio1-gpio6 for pmk8550
+ - gpio1-gpio10 for pmm8155au
+ - gpio1-gpio12 for pmm8654au
+ - gpio1-gpio12 for pmp8074 (holes on gpio1 and gpio12)
+ - gpio1-gpio4 for pmr735a
+ - gpio1-gpio4 for pmr735b
+ - gpio1-gpio2 for pmr735d
+ - gpio1-gpio12 for pms405 (holes on gpio1, gpio9
+ and gpio10)
+ - gpio1-gpio11 for pmx55 (holes on gpio3, gpio7, gpio10
+ and gpio11)
+ - gpio1-gpio16 for pmx65
+ - gpio1-gpio16 for pmx75
+
+ items:
+ pattern: "^gpio([0-9]+)$"
+
+ function:
+ items:
+ - enum:
+ - normal
+ - paired
+ - func1
+ - func2
+ - dtest1
+ - dtest2
+ - dtest3
+ - dtest4
+ - func3 # supported by LV/MV GPIO subtypes
+ - func4 # supported by LV/MV GPIO subtypes
+
+ bias-disable: true
+ bias-pull-down: true
+ bias-pull-up: true
+
+ qcom,pull-up-strength:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Specifies the strength to use for pull up, if selected.
+ Valid values are defined in
+ <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+ If this property is omitted 30uA strength will be used
+ if pull up is selected
+ enum: [0, 1, 2, 3]
+
+ bias-high-impedance: true
+ input-enable: true
+ input-disable: true
+ output-high: true
+ output-low: true
+ output-enable: true
+ output-disable: true
+ power-source: true
+
+ qcom,drive-strength:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Selects the drive strength for the specified pins
+ Valid drive strength values are defined in
+ <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+ enum: [0, 1, 2, 3]
+
+ drive-push-pull: true
+ drive-open-drain: true
+ drive-open-source: true
+
+ qcom,analog-pass:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ The specified pins are configured in
+ analog-pass-through mode.
+
+ qcom,atest:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Selects ATEST rail to route to GPIO when it's
+ configured in analog-pass-through mode.
+ enum: [1, 2, 3, 4]
+
+ qcom,dtest-buffer:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Selects DTEST rail to route to GPIO when it's
+ configured as digital input.
+ enum: [1, 2, 3, 4]
+
+ required:
+ - pins
+ - function
+
+ additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+ pm8921_gpio: gpio@150 {
+ compatible = "qcom,pm8921-gpio", "qcom,ssbi-gpio";
+ reg = <0x150 0x160>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pm8921_gpio 0 0 44>;
+ #gpio-cells = <2>;
+
+ pm8921_gpio_keys: gpio-keys-state {
+ volume-keys-pins {
+ pins = "gpio20", "gpio21";
+ function = "normal";
+
+ input-enable;
+ bias-pull-up;
+ drive-push-pull;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+ power-source = <PM8921_GPIO_S4>;
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
new file mode 100644
index 0000000000..80f9606718
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
@@ -0,0 +1,191 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,pmic-mpp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PMIC Multi-Purpose Pin (MPP) block
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+ This binding describes the MPP block(s) found in the 8xxx series of
+ PMIC's from Qualcomm.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - qcom,pm8019-mpp
+ - qcom,pm8226-mpp
+ - qcom,pm8841-mpp
+ - qcom,pm8916-mpp
+ - qcom,pm8941-mpp
+ - qcom,pm8950-mpp
+ - qcom,pmi8950-mpp
+ - qcom,pm8994-mpp
+ - qcom,pma8084-mpp
+ - qcom,pmi8994-mpp
+ - const: qcom,spmi-mpp
+ - items:
+ - enum:
+ - qcom,pm8018-mpp
+ - qcom,pm8038-mpp
+ - qcom,pm8058-mpp
+ - qcom,pm8821-mpp
+ - qcom,pm8917-mpp
+ - qcom,pm8921-mpp
+ - const: qcom,ssbi-mpp
+
+ reg:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+ gpio-controller: true
+ gpio-line-names: true
+
+ gpio-ranges:
+ maxItems: 1
+
+ '#gpio-cells':
+ const: 2
+ description:
+ The first cell will be used to define gpio number and the
+ second denotes the flags for this gpio
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+ - interrupt-controller
+
+patternProperties:
+ '-state$':
+ oneOf:
+ - $ref: "#/$defs/qcom-pmic-mpp-state"
+ - patternProperties:
+ '-pins$':
+ $ref: "#/$defs/qcom-pmic-mpp-state"
+ additionalProperties: false
+
+$defs:
+ qcom-pmic-mpp-state:
+ type: object
+ allOf:
+ - $ref: pinmux-node.yaml
+ - $ref: pincfg-node.yaml
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in
+ this subnode. Valid pins are
+ - mpp1-mpp4 for pm8841
+ - mpp1-mpp4 for pm8916
+ - mpp1-mpp8 for pm8941
+ - mpp1-mpp4 for pm8950
+ - mpp1-mpp4 for pmi8950
+ - mpp1-mpp4 for pma8084
+
+ items:
+ pattern: "^mpp([0-9]+)$"
+
+ function:
+ items:
+ - enum:
+ - digital
+ - analog
+ - sink
+
+ bias-disable: true
+ bias-pull-up: true
+ bias-high-impedance: true
+ input-enable: true
+ output-high: true
+ output-low: true
+ power-source: true
+
+ qcom,analog-level:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Selects the source for analog output. Valued values are defined in
+ <dt-binding/pinctrl/qcom,pmic-mpp.h> PMIC_MPP_AOUT_LVL_*
+ enum: [0, 1, 2, 3, 4, 5, 6, 7]
+
+ qcom,atest:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Selects ATEST rail to route to GPIO when it's
+ configured in analog-pass-through mode.
+ enum: [1, 2, 3, 4]
+
+ qcom,dtest:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Selects DTEST rail to route to GPIO when it's
+ configured as digital input.
+ enum: [1, 2, 3, 4]
+
+ qcom,amux-route:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Selects the source for analog input. Valid values are defined in
+ <dt-bindings/pinctrl/qcom,pmic-mpp.h> PMIC_MPP_AMUX_ROUTE_CH5,
+ PMIC_MPP_AMUX_ROUTE_CH6...
+ enum: [0, 1, 2, 3, 4, 5, 6, 7]
+
+ qcom,paired:
+ type: boolean
+ description:
+ Indicates that the pin should be operating in paired mode.
+
+ required:
+ - pins
+ - function
+
+ additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+
+ pm8841_mpp: mpps@a000 {
+ compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp";
+ reg = <0xa000 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pm8841_mpp 0 0 4>;
+ gpio-line-names = "VDD_PX_BIAS", "WLAN_LED_CTRL",
+ "BT_LED_CTRL", "GPIO-F";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pm8841_default>;
+
+ mpp1-state {
+ pins = "mpp1";
+ function = "digital";
+ input-enable;
+ power-source = <PM8841_MPP_S3>;
+ };
+
+ default-state {
+ gpio-pins {
+ pins = "mpp1", "mpp2", "mpp3", "mpp4";
+ function = "digital";
+ input-enable;
+ power-source = <PM8841_MPP_S3>;
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml
new file mode 100644
index 0000000000..c323f6d495
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,qcm2290-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. QCM2290 TLMM block
+
+maintainers:
+ - Shawn Guo <shawn.guo@linaro.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm QCM2290 SoC.
+
+properties:
+ compatible:
+ const: qcom,qcm2290-tlmm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-qcm2290-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-qcm2290-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-qcm2290-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-9]|12[0-6])$"
+ - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data,
+ sdc2_clk, sdc2_cmd, sdc2_data ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ adsp_ext, agera_pll, atest, cam_mclk, cci_async, cci_i2c,
+ cci_timer0, cci_timer1, cci_timer2, cci_timer3, char_exec,
+ cri_trng, cri_trng0, cri_trng1, dac_calib, dbg_out, ddr_bist,
+ ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, gcc_gp1, gcc_gp2,
+ gcc_gp3, gpio, gp_pdm0, gp_pdm1, gp_pdm2, gsm0_tx, gsm1_tx,
+ jitter_bist, mdp_vsync, mdp_vsync_out_0, mdp_vsync_out_1,
+ mpm_pwr, mss_lte, m_voc, nav_gpio, pa_indicator, pbs0, pbs1,
+ pbs2, pbs3, pbs4, pbs5, pbs6, pbs7, pbs8, pbs9, pbs10, pbs11,
+ pbs12, pbs13, pbs14, pbs15, pbs_out, phase_flag, pll_bist,
+ pll_bypassnl, pll_reset, prng_rosc, pwm_0, pwm_1, pwm_2, pwm_3,
+ pwm_4, pwm_5, pwm_6, pwm_7, pwm_8, pwm_9, qdss_cti, qdss_gpio,
+ qup0, qup1, qup2, qup3, qup4, qup5, sdc1_tb, sdc2_tb, sd_write,
+ ssbi_wtr1, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm,
+ uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk,
+ uim2_data, uim2_present, uim2_reset, usb_phy, vfr_1,
+ vsense_trigger, wlan1_adc0, wlan1_adc1 ]
+
+ required:
+ - pins
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ tlmm: pinctrl@500000 {
+ compatible = "qcom,qcm2290-tlmm";
+ reg = <0x500000 0x300000>;
+ interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 127>;
+
+ sdc2_on_state: sdc2-on-state {
+ clk-pins {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ cmd-pins {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ data-pins {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml
new file mode 100644
index 0000000000..b1b9cd319e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml
@@ -0,0 +1,169 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,qcs404-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCS404 TLMM pin controller
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm QCS404 SoC.
+
+properties:
+ compatible:
+ const: qcom,qcs404-pinctrl
+
+ reg:
+ maxItems: 3
+
+ reg-names:
+ items:
+ - const: south
+ - const: north
+ - const: east
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 60
+
+ gpio-line-names:
+ maxItems: 120
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-qcs404-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-qcs404-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-qcs404-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-9])$"
+ - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk,
+ sdc2_cmd, sdc2_data, ufs_reset ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ gpio, adsp_ext, atest_char, atest_char0, atest_char1,
+ atest_char2, atest_char3, aud_cdc, audio_ts, bimc_dte0,
+ bimc_dte1, blsp_i2c0, blsp_i2c1, blsp_i2c3, blsp_i2c4,
+ blsp_i2c5, blsp_i2c_scl_a2, blsp_i2c_scl_b2, blsp_i2c_sda_a2,
+ blsp_i2c_sda_b2, blsp_spi0, blsp_spi2, blsp_spi3, blsp_spi4,
+ blsp_spi5, blsp_spi_clk_a1, blsp_spi_clk_b1, blsp_spi_cs_n_a1,
+ blsp_spi_cs_n_b1, blsp_spi_miso_a1, blsp_spi_miso_b1,
+ blsp_spi_mosi_a1, blsp_spi_mosi_b1, blsp_uart0, blsp_uart1,
+ blsp_uart2, blsp_uart3, blsp_uart5, blsp_uart_rx_a2,
+ blsp_uart_rx_b2, blsp_uart_tx_a2, blsp_uart_tx_b2, cri_trng,
+ cri_trng0, cri_trng1, dbg_out, dsd_clk_a, dsd_clk_b, ebi2_a,
+ ebi2_lcd, ebi_cdc, ebi_ch0, ext_lpass, ext_mclk0, ext_mclk1_a,
+ ext_mclk1_b, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a,
+ gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gcc_plltest,
+ gcc_tlmm, hdmi_ddc, hdmi_dtest, hdmi_lbk0, hdmi_lbk1,
+ hdmi_lbk2, hdmi_lbk3, hdmi_lbk4, hdmi_lbk5, hdmi_lbk6,
+ hdmi_lbk7, hdmi_lbk8, hdmi_lbk9, hdmi_pixel, hdmi_rcv, hdmi_tx,
+ i2s_1, i2s_2, i2s_3_data0_a, i2s_3_data0_b, i2s_3_data1_a,
+ i2s_3_data1_b, i2s_3_data2_a, i2s_3_data2_b, i2s_3_data3_a,
+ i2s_3_data3_b, i2s_3_sck_a, i2s_3_sck_b, i2s_3_ws_a,
+ i2s_3_ws_b, i2s_4, ir_in, ldo_en, ldo_update, mclk_in1,
+ mclk_in2, m_voc, nfc_dwl, nfc_irq, pcie_clk, pll_bist,
+ prng_rosc, pwm_led1, pwm_led10, pwm_led11, pwm_led12,
+ pwm_led13, pwm_led14, pwm_led15, pwm_led16, pwm_led17,
+ pwm_led18, pwm_led19, pwm_led2, pwm_led20, pwm_led21,
+ pwm_led22, pwm_led23, pwm_led24, pwm_led3, pwm_led4, pwm_led5,
+ pwm_led6, pwm_led7, pwm_led8, pwm_led9, qdss_cti_trig_in_a0,
+ qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, qdss_cti_trig_in_b1,
+ qdss_cti_trig_out_a0, qdss_cti_trig_out_a1,
+ qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a,
+ qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b,
+ qdss_tracedata_a, qdss_tracedata_b, rgb_clk, rgb_data0,
+ rgb_data1, rgb_data2, rgb_data3, rgb_data4, rgb_data5,
+ rgb_data6, rgb_data7, rgb_data_b0, rgb_data_b1, rgb_data_b2,
+ rgb_data_b3, rgb_data_b4, rgb_data_b5, rgb_data_b6,
+ rgb_data_b7, rgb_de, rgb_hsync, rgb_mdp, rgb_vsync, rgmi_dll1,
+ rgmi_dll2, rgmii_ck, rgmii_ctl, rgmii_int, rgmii_mdc,
+ rgmii_mdio, rgmii_rx, rgmii_tx, rgmii_wol, sd_write,
+ spdifrx_opt, spi_lcd, spkr_dac0, wlan1_adc0, wlan1_adc1,
+ wlan2_adc0, wlan2_adc1, wsa_en ]
+
+ required:
+ - pins
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ tlmm: pinctrl@1000000 {
+ compatible = "qcom,qcs404-pinctrl";
+ reg = <0x01000000 0x200000>,
+ <0x01300000 0x200000>,
+ <0x07b00000 0x200000>;
+ reg-names = "south", "north", "east";
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-ranges = <&tlmm 0 0 120>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+
+ blsp1-i2c1-default-state {
+ pins = "gpio24", "gpio25";
+ function = "blsp_i2c1";
+ };
+
+ blsp1-i2c2-default-state {
+ sda-pins {
+ pins = "gpio19";
+ function = "blsp_i2c_sda_a2";
+ };
+
+ scl-pins {
+ pins = "gpio20";
+ function = "blsp_i2c_scl_a2";
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml
new file mode 100644
index 0000000000..237cac4f6c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-tlmm.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,qdu1000-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. QDU1000/QRU1000 TLMM block
+
+maintainers:
+ - Melody Olvera <quic_molvera@quicinc.com>
+
+description: |
+ Top Level Mode Multiplexer pin controller found in the QDU1000 and
+ QRU1000 SoCs.
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,qdu1000-tlmm
+
+ reg:
+ maxItems: 1
+
+ interrupts: true
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 76
+
+ gpio-line-names:
+ maxItems: 151
+
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-qdu1000-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-qdu1000-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-qdu1000-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|150)$"
+ - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+ enum: [ atest_char, atest_usb, char_exec, CMO_PRI, cmu_rng,
+ dbg_out_clk, ddr_bist, ddr_pxi1, ddr_pxi2, ddr_pxi3, ddr_pxi4,
+ ddr_pxi5, ddr_pxi6, ddr_pxi7, eth012_int_n, eth345_int_n,
+ gcc_gp1, gcc_gp2, gcc_gp3, gpio, gps_pps_in, hardsync_pps_in,
+ intr_c, jitter_bist_ref, pcie_clkreqn, phase_flag, pll_bist,
+ pll_clk, prng_rosc, qdss_cti, qdss_gpio, qlink0_enable,
+ qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request,
+ qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss,
+ qlink3_enable, qlink3_request, qlink3_wmss, qlink4_enable,
+ qlink4_request, qlink4_wmss, qlink5_enable, qlink5_request,
+ qlink5_wmss, qlink6_enable, qlink6_request, qlink6_wmss,
+ qlink7_enable, qlink7_request, qlink7_wmss, qspi_clk, qspi_cs,
+ qspi0, qspi1, qspi2, qspi3, qup00, qup01, qup02, qup03, qup04,
+ qup05, qup06, qup07, qup08, qup10, qup11, qup12, qup13, qup14,
+ qup15, qup16, qup17, qup20, qup21, qup22, SI5518_INT, smb_alert,
+ smb_clk, smb_dat, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3,
+ tgu_ch4, tgu_ch5, tgu_ch6, tgu_ch7, tmess_prng0, tmess_prng1,
+ tmess_prng2, tmess_prng3, tod_pps_in, tsense_pwm1, tsense_pwm2,
+ usb2phy_ac, usb_con_det, usb_dfp_en, usb_phy, vfr_0, vfr_1,
+ vsense_trigger ]
+
+ required:
+ - pins
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ pinctrl@f000000 {
+ compatible = "qcom,qdu1000-tlmm";
+ reg = <0xf000000 0x1000000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 151>;
+ wakeup-parent = <&pdc>;
+
+ uart0-default-state {
+ pins = "gpio6", "gpio7", "gpio8", "gpio9";
+ function = "qup00";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml
new file mode 100644
index 0000000000..e119a226a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sa8775p-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SA8775P TLMM block
+
+maintainers:
+ - Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+description: |
+ Top Level Mode Multiplexer pin controller in Qualcomm SA8775P SoC.
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sa8775p-tlmm
+
+ reg:
+ maxItems: 1
+
+ interrupts: true
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ "#gpio-cells": true
+ gpio-ranges: true
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 74
+
+ gpio-line-names:
+ maxItems: 148
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sa8775p-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sa8775p-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sa8775p-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[0-7])$"
+ - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, ufs_reset ]
+ minItems: 1
+ maxItems: 16
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ atest_char, atest_usb2, audio_ref, cam_mclk, cci_async, cci_i2c,
+ cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
+ cci_timer5, cci_timer6, cci_timer7, cci_timer8, cci_timer9,
+ cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0,
+ ddr_pxi1, ddr_pxi2, ddr_pxi3, ddr_pxi4, ddr_pxi5, edp0_hot,
+ edp0_lcd, edp1_hot, edp1_lcd, edp2_hot, edp2_lcd, edp3_hot,
+ edp3_lcd, emac0_mcg0, emac0_mcg1, emac0_mcg2, emac0_mcg3,
+ emac0_mdc, emac0_mdio, emac0_ptp_aux, emac0_ptp_pps, emac1_mcg0,
+ emac1_mcg1, emac1_mcg2, emac1_mcg3, emac1_mdc, emac1_mdio,
+ emac1_ptp_aux, emac1_ptp_pps, gcc_gp1, gcc_gp2, gcc_gp3,
+ gcc_gp4, gcc_gp5, gpio, hs0_mi2s, hs1_mi2s, hs2_mi2s, ibi_i3c,
+ jitter_bist, mdp0_vsync0, mdp0_vsync1, mdp0_vsync2, mdp0_vsync3,
+ mdp0_vsync4, mdp0_vsync5, mdp0_vsync6, mdp0_vsync7, mdp0_vsync8,
+ mdp1_vsync0, mdp1_vsync1, mdp1_vsync2, mdp1_vsync3, mdp1_vsync4,
+ mdp1_vsync5, mdp1_vsync6, mdp1_vsync7, mdp1_vsync8, mdp_vsync,
+ mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws, mi2s2_data0,
+ mi2s2_data1, mi2s2_sck, mi2s2_ws, mi2s_mclk0, mi2s_mclk1,
+ pcie0_clkreq, pcie1_clkreq, phase_flag, pll_bist, pll_clk,
+ prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti,
+ qdss_gpio, qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4,
+ qup0_se5, qup1_se0, qup1_se1, qup1_se2, qup1_se3, qup1_se4,
+ qup1_se5, qup1_se6, qup2_se0, qup2_se1, qup2_se2, qup2_se3,
+ qup2_se4, qup2_se5, qup2_se6, qup3_se0, sailss_emac0,
+ sailss_ospi, sail_top, sgmii_phy, tb_trig, tgu_ch0, tgu_ch1,
+ tgu_ch2, tgu_ch3, tgu_ch4, tgu_ch5, tsense_pwm1, tsense_pwm2,
+ tsense_pwm3, tsense_pwm4, usb2phy_ac, vsense_trigger ]
+
+ required:
+ - pins
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ tlmm: pinctrl@f000000 {
+ compatible = "qcom,sa8775p-tlmm";
+ reg = <0xf000000 0x1000000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 148>;
+
+ qup-uart10-state {
+ pins = "gpio46", "gpio47";
+ function = "qup1_se3";
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml
new file mode 100644
index 0000000000..573e459b1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml
@@ -0,0 +1,151 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sc7180-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7180 TLMM pin controller
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm SC7180 SoC.
+
+properties:
+ compatible:
+ const: qcom,sc7180-pinctrl
+
+ reg:
+ maxItems: 3
+
+ reg-names:
+ items:
+ - const: west
+ - const: north
+ - const: south
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 60
+
+ gpio-line-names:
+ maxItems: 119
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sc7180-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sc7180-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sc7180-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-8])$"
+ - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk,
+ sdc2_cmd, sdc2_data, ufs_reset ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ adsp_ext, agera_pll, aoss_cti, atest_char, atest_char0,
+ atest_char1, atest_char2, atest_char3, atest_tsens,
+ atest_tsens2, atest_usb1, atest_usb10, atest_usb11,
+ atest_usb12, atest_usb13, atest_usb2, atest_usb20, atest_usb21,
+ atest_usb22, atest_usb23, audio_ref, btfm_slimbus, cam_mclk,
+ cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2,
+ cci_timer3, cci_timer4, cri_trng, dbg_out, ddr_bist, ddr_pxi0,
+ ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot, edp_lcd, gcc_gp1,
+ gcc_gp2, gcc_gp3, gpio, gp_pdm0, gp_pdm1, gp_pdm2, gps_tx,
+ jitter_bist, ldo_en, ldo_update, lpass_ext, mdp_vsync,
+ mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s_0, mi2s_1,
+ mi2s_2, mss_lte, m_voc, pa_indicator, phase_flag, PLL_BIST,
+ pll_bypassnl, pll_reset, prng_rosc, qdss, qdss_cti,
+ qlink_enable, qlink_request, qspi_clk, qspi_cs, qspi_data,
+ qup00, qup01, qup02_i2c, qup02_uart, qup03, qup04_i2c,
+ qup04_uart, qup05, qup10, qup11_i2c, qup11_uart, qup12,
+ qup13_i2c, qup13_uart, qup14, qup15, sdc1_tb, sdc2_tb,
+ sd_write, sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3,
+ tsense_pwm1, tsense_pwm2, uim1, uim2, uim_batt, usb_phy, vfr_1,
+ _V_GPIO, _V_PPS_IN, _V_PPS_OUT, vsense_trigger, wlan1_adc0,
+ wlan1_adc1, wlan2_adc0, wlan2_adc1 ]
+
+ required:
+ - pins
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+ - compatible
+ - reg
+ - reg-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ tlmm: pinctrl@3500000 {
+ compatible = "qcom,sc7180-pinctrl";
+ reg = <0x03500000 0x300000>,
+ <0x03900000 0x300000>,
+ <0x03d00000 0x300000>;
+ reg-names = "west", "north", "south";
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 120>;
+ wakeup-parent = <&pdc>;
+
+ dp_hot_plug_det: dp-hot-plug-det-state {
+ pins = "gpio117";
+ function = "dp_hot";
+ };
+
+ qup_spi11_cs_gpio: qup-spi11-cs-gpio-state {
+ spi-pins {
+ pins = "gpio53", "gpio54", "gpio55";
+ function = "qup15";
+ };
+
+ cs-pins {
+ pins = "gpio56";
+ function = "gpio";
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
new file mode 100644
index 0000000000..00c5a00e35
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC7280 SoC LPASS LPI TLMM
+
+maintainers:
+ - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem
+ (LPASS) Low Power Island (LPI) of Qualcomm SC7280 SoC.
+
+properties:
+ compatible:
+ const: qcom,sc7280-lpass-lpi-pinctrl
+
+ reg:
+ maxItems: 2
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ description: Specifying the pin number and flags, as defined in
+ include/dt-bindings/gpio/gpio.h
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sc7280-lpass-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sc7280-lpass-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sc7280-lpass-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: /schemas/pinctrl/pincfg-node.yaml
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|1[0-4])$"
+ minItems: 1
+ maxItems: 15
+
+ function:
+ enum: [ gpio, swr_tx_clk, qua_mi2s_sclk, swr_tx_data, qua_mi2s_ws,
+ qua_mi2s_data, swr_rx_clk, swr_rx_data, dmic1_clk, i2s1_clk,
+ dmic1_data, i2s1_ws, dmic2_clk, dmic2_data, i2s1_data,
+ i2s2_clk, wsa_swr_clk, i2s2_ws, wsa_swr_data, dmic3_clk,
+ dmic3_data, i2s2_data ]
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ drive-strength:
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+ default: 2
+ description:
+ Selects the drive strength for the specified pins, in mA.
+
+ slew-rate:
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ 0: No adjustments
+ 1: Higher Slew rate (faster edges)
+ 2: Lower Slew rate (slower edges)
+ 3: Reserved (No adjustments)
+
+ bias-pull-down: true
+ bias-pull-up: true
+ bias-bus-hold: true
+ bias-disable: true
+ output-high: true
+ output-low: true
+
+ required:
+ - pins
+ - function
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - "#gpio-cells"
+ - gpio-ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ lpass_tlmm: pinctrl@33c0000 {
+ compatible = "qcom,sc7280-lpass-lpi-pinctrl";
+ reg = <0x33c0000 0x20000>,
+ <0x3550000 0x10000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&lpass_tlmm 0 0 15>;
+
+ dmic01-state {
+ dmic01-clk-pins {
+ pins = "gpio6";
+ function = "dmic1_clk";
+ };
+
+ dmic01-clk-sleep-pins {
+ pins = "gpio6";
+ function = "dmic1_clk";
+ };
+ };
+
+ tx-swr-data-sleep-state {
+ pins = "gpio1", "gpio2", "gpio14";
+ function = "swr_tx_data";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
new file mode 100644
index 0000000000..368d44ff54
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sc7280-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SC7280 TLMM block
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm SC7280 SoC.
+
+properties:
+ compatible:
+ const: qcom,sc7280-pinctrl
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: Specifies the TLMM summary IRQ
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ description:
+ Specifies the PIN numbers and Flags, as defined in defined in
+ include/dt-bindings/interrupt-controller/irq.h
+ const: 2
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ description: Specifying the pin number and flags, as defined in
+ include/dt-bindings/gpio/gpio.h
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ gpio-line-names:
+ maxItems: 175
+
+ wakeup-parent: true
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sc7280-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sc7280-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sc7280-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-6][0-9]|17[0-4])$"
+ - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk,
+ sdc2_cmd, sdc2_data, ufs_reset ]
+ minItems: 1
+ maxItems: 16
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ atest_char, atest_char0, atest_char1, atest_char2,
+ atest_char3, atest_usb0, atest_usb00, atest_usb01,
+ atest_usb02, atest_usb03, atest_usb1, atest_usb10,
+ atest_usb11, atest_usb12, atest_usb13, audio_ref,
+ cam_mclk, cci_async, cci_i2c, cci_timer0, cci_timer1,
+ cci_timer2, cci_timer3, cci_timer4, cmu_rng0, cmu_rng1,
+ cmu_rng2, cmu_rng3, coex_uart1, cri_trng, cri_trng0,
+ cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, dp_hot,
+ dp_lcd, edp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3,
+ gpio, host2wlan_sol, ibi_i3c, jitter_bist, lpass_slimbus,
+ mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3,
+ mdp_vsync4, mdp_vsync5, mi2s0_data0, mi2s0_data1, mi2s0_sck,
+ mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws,
+ mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, mss_grfc0,
+ mss_grfc1, mss_grfc10, mss_grfc11, mss_grfc12, mss_grfc2,
+ mss_grfc3, mss_grfc4, mss_grfc5, mss_grfc6, mss_grfc7,
+ mss_grfc8, mss_grfc9, nav_gpio0, nav_gpio1, nav_gpio2,
+ pa_indicator, pcie0_clkreqn, pcie1_clkreqn, phase_flag,
+ pll_bist, pll_bypassnl, pll_clk, pll_reset, pri_mi2s, prng_rosc,
+ qdss, qdss_cti, qlink0_enable, qlink0_request, qlink0_wmss,
+ qlink1_enable, qlink1_request, qlink1_wmss, qspi_clk, qspi_cs,
+ qspi_data, qup00, qup01, qup02, qup03, qup04, qup05, qup06, qup07,
+ qup10, qup11, qup12, qup13, qup14, qup15, qup16, qup17,
+ sdc40, sdc41, sdc42, sdc43, sdc4_clk, sdc4_cmd, sd_write,
+ sec_mi2s, tb_trig, tgu_ch0, tgu_ch1, tsense_pwm1,
+ tsense_pwm2, uim0_clk, uim0_data, uim0_present, uim0_reset,
+ uim1_clk, uim1_data, uim1_present, uim1_reset, usb2phy_ac,
+ usb_phy, vfr_0, vfr_1, vsense_trigger ]
+
+ required:
+ - pins
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ tlmm: pinctrl@f000000 {
+ compatible = "qcom,sc7280-pinctrl";
+ reg = <0xf000000 0x1000000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 175>;
+ wakeup-parent = <&pdc>;
+
+ qup_uart5_default: qup-uart5-state {
+ pins = "gpio46", "gpio47";
+ function = "qup13";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml
new file mode 100644
index 0000000000..b086a51842
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8180x-tlmm.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sc8180x-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SC8180X TLMM block
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm SC8180X SoC.
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sc8180x-tlmm
+
+ reg:
+ maxItems: 3
+
+ reg-names:
+ items:
+ - const: west
+ - const: east
+ - const: south
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ '#interrupt-cells': true
+ gpio-controller: true
+ gpio-reserved-ranges: true
+ '#gpio-cells': true
+ gpio-ranges: true
+ wakeup-parent: true
+
+required:
+ - compatible
+ - reg
+ - reg-names
+
+additionalProperties: false
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sc8180x-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sc8180x-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sc8180x-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-8][0-9])$"
+ - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+ minItems: 1
+ maxItems: 16
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ adsp_ext, agera_pll, aoss_cti, atest_char, atest_tsens,
+ atest_tsens2, atest_usb0, atest_usb1, atest_usb2, atest_usb3,
+ atest_usb4, audio_ref, btfm_slimbus, cam_mclk, cci_async,
+ cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3,
+ cci_timer4, cci_timer5, cci_timer6, cci_timer7, cci_timer8,
+ cci_timer9, cri_trng, dbg_out, ddr_bist, ddr_pxi, debug_hot,
+ dp_hot, edp_hot, edp_lcd, emac_phy, emac_pps, gcc_gp1, gcc_gp2,
+ gcc_gp3, gcc_gp4, gcc_gp5, gpio, gps, grfc, hs1_mi2s, hs2_mi2s,
+ hs3_mi2s, jitter_bist, lpass_slimbus, m_voc, mdp_vsync,
+ mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, mdp_vsync4,
+ mdp_vsync5, mss_lte, nav_pps, pa_indicator, pci_e0, pci_e1,
+ pci_e2, pci_e3, phase_flag, pll_bist, pll_bypassnl, pll_reset,
+ pri_mi2s, pri_mi2s_ws, prng_rosc, qdss_cti, qdss_gpio, qlink,
+ qspi0, qspi0_clk, qspi0_cs, qspi1, qspi1_clk, qspi1_cs,
+ qua_mi2s, qup0, qup1, qup2, qup3, qup4, qup5, qup6, qup7, qup8,
+ qup9, qup10, qup11, qup12, qup13, qup14, qup15, qup16, qup17,
+ qup18, qup19, qup_l4, qup_l5, qup_l6, rgmii, sd_write, sdc4,
+ sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, spkr_i2s, ter_mi2s, tgu,
+ tsense_pwm1, tsense_pwm2, tsif1, tsif2, uim1, uim2, uim_batt,
+ usb0_phy, usb1_phy, usb2phy_ac, vfr_1, vsense_trigger,
+ wlan1_adc, wlan2_adc, wmss_reset ]
+
+ required:
+ - pins
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ pinctrl@3100000 {
+ compatible = "qcom,sc8180x-tlmm";
+ reg = <0x03100000 0x300000>,
+ <0x03500000 0x700000>,
+ <0x03d00000 0x300000>;
+ reg-names = "west", "east", "south";
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 190>;
+
+ gpio-wo-subnode-state {
+ pins = "gpio1";
+ function = "gpio";
+ };
+
+ uart-w-subnodes-state {
+ rx-pins {
+ pins = "gpio4";
+ function = "qup6";
+ bias-pull-up;
+ };
+
+ tx-pins {
+ pins = "gpio5";
+ function = "qup6";
+ bias-disable;
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml
new file mode 100644
index 0000000000..a9167dac9a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml
@@ -0,0 +1,155 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sc8280xp-lpass-lpi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8280XP SoC LPASS LPI TLMM
+
+maintainers:
+ - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem
+ (LPASS) Low Power Island (LPI) of Qualcomm SC8280XP SoC.
+
+properties:
+ compatible:
+ const: qcom,sc8280xp-lpass-lpi-pinctrl
+
+ reg:
+ items:
+ - description: LPASS LPI TLMM Control and Status registers
+ - description: LPASS LPI MCC registers
+
+ clocks:
+ items:
+ - description: LPASS Core voting clock
+ - description: LPASS Audio voting clock
+
+ clock-names:
+ items:
+ - const: core
+ - const: audio
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ description: Specifying the pin number and flags, as defined in
+ include/dt-bindings/gpio/gpio.h
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sc8280xp-lpass-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sc8280xp-lpass-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sc8280xp-lpass-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: /schemas/pinctrl/pincfg-node.yaml
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ pattern: "^gpio([0-9]|1[0-8])$"
+
+ function:
+ enum: [ swr_tx_clk, swr_tx_data, swr_rx_clk, swr_rx_data,
+ dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic4_clk,
+ dmic4_data, i2s2_clk, i2s2_ws, dmic3_clk, dmic3_data,
+ qua_mi2s_sclk, qua_mi2s_ws, qua_mi2s_data, i2s1_clk, i2s1_ws,
+ i2s1_data, wsa_swr_clk, wsa_swr_data, wsa2_swr_clk,
+ wsa2_swr_data, i2s2_data, i2s3_clk, i2s3_ws, i2s3_data,
+ ext_mclk1_c, ext_mclk1_b, ext_mclk1_a ]
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ drive-strength:
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+ default: 2
+ description:
+ Selects the drive strength for the specified pins, in mA.
+
+ slew-rate:
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ 0: No adjustments
+ 1: Higher Slew rate (faster edges)
+ 2: Lower Slew rate (slower edges)
+ 3: Reserved (No adjustments)
+
+ bias-bus-hold: true
+ bias-pull-down: true
+ bias-pull-up: true
+ bias-disable: true
+ input-enable: true
+ output-high: true
+ output-low: true
+
+ required:
+ - pins
+ - function
+
+ additionalProperties: false
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - gpio-controller
+ - "#gpio-cells"
+ - gpio-ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/sound/qcom,q6afe.h>
+ pinctrl@33c0000 {
+ compatible = "qcom,sc8280xp-lpass-lpi-pinctrl";
+ reg = <0x33c0000 0x20000>,
+ <0x3550000 0x10000>;
+ clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+ clock-names = "core", "audio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&lpi_tlmm 0 0 19>;
+
+ dmic01-state {
+ dmic01-clk-pins {
+ pins = "gpio16";
+ function = "dmic1_clk";
+ };
+
+ dmic01-clk-sleep-pins {
+ pins = "gpio16";
+ function = "dmic1_clk";
+ };
+ };
+
+ tx-swr-data-sleep-state {
+ pins = "gpio0", "gpio1";
+ function = "swr_tx_data";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
new file mode 100644
index 0000000000..4bd6d7977d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sc8280xp-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SC8280XP TLMM block
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+ Top Level Mode Multiplexer pin controller in Qualcomm SC8280XP SoC.
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sc8280xp-tlmm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ gpio-reserved-ranges: true
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sc8280xp-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sc8280xp-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sc8280xp-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-1][0-9]|22[0-7])$"
+ - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset, ufs1_reset ]
+ minItems: 1
+ maxItems: 16
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ atest_char, atest_usb, audio_ref, cam_mclk, cci_async, cci_i2c,
+ cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
+ cci_timer5, cci_timer6, cci_timer7, cci_timer8, cci_timer9,
+ cmu_rng, cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist,
+ ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, ddr_pxi4, ddr_pxi5,
+ ddr_pxi6, ddr_pxi7, dp2_hot, dp3_hot, edp0_lcd, edp1_lcd,
+ edp2_lcd, edp3_lcd, edp_hot, emac0_dll, emac0_mcg0, emac0_mcg1,
+ emac0_mcg2, emac0_mcg3, emac0_phy, emac0_ptp, emac1_dll0,
+ emac1_dll1, emac1_mcg0, emac1_mcg1, emac1_mcg2, emac1_mcg3,
+ emac1_phy, emac1_ptp, gcc_gp1, gcc_gp2, gcc_gp3, gcc_gp4,
+ gcc_gp5, gpio, hs1_mi2s, hs2_mi2s, hs3_mi2s, ibi_i3c,
+ jitter_bist, lpass_slimbus, mdp0_vsync0, mdp0_vsync1,
+ mdp0_vsync2, mdp0_vsync3, mdp0_vsync4, mdp0_vsync5,
+ mdp0_vsync6, mdp0_vsync7, mdp0_vsync8, mdp1_vsync0,
+ mdp1_vsync1, mdp1_vsync2, mdp1_vsync3, mdp1_vsync4,
+ mdp1_vsync5, mdp1_vsync6, mdp1_vsync7, mdp1_vsync8, mdp_vsync,
+ mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws, mi2s1_data0,
+ mi2s1_data1, mi2s1_sck, mi2s1_ws, mi2s2_data0, mi2s2_data1,
+ mi2s2_sck, mi2s2_ws, mi2s_mclk1, mi2s_mclk2, pcie2a_clkreq,
+ pcie2b_clkreq, pcie3a_clkreq, pcie3b_clkreq, pcie4_clkreq,
+ phase_flag, pll_bist, pll_clk, prng_rosc0, prng_rosc1,
+ prng_rosc2, prng_rosc3, qdss_cti, qdss_gpio, qspi, qspi_clk,
+ qspi_cs, qup0, qup1, qup2, qup3, qup4, qup5, qup6, qup7, qup8,
+ qup9, qup10, qup11, qup12, qup13, qup14, qup15, qup16, qup17,
+ qup18, qup19, qup20, qup21, qup22, qup23, rgmii_0, rgmii_1,
+ sd_write, sdc40, sdc42, sdc43, sdc4_clk, sdc4_cmd, tb_trig,
+ tgu, tsense_pwm1, tsense_pwm2, tsense_pwm3, tsense_pwm4,
+ usb0_dp, usb0_phy, usb0_sbrx, usb0_sbtx, usb0_usb4, usb1_dp,
+ usb1_phy, usb1_sbrx, usb1_sbtx, usb1_usb4, usb2phy_ac,
+ vsense_trigger ]
+
+ required:
+ - pins
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ pinctrl@f100000 {
+ compatible = "qcom,sc8280xp-tlmm";
+ reg = <0x0f100000 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 230>;
+
+ gpio-wo-subnode-state {
+ pins = "gpio1";
+ function = "gpio";
+ };
+
+ uart-w-subnodes-state {
+ rx-pins {
+ pins = "gpio4";
+ function = "qup14";
+ bias-pull-up;
+ };
+
+ tx-pins {
+ pins = "gpio5";
+ function = "qup14";
+ bias-disable;
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml
new file mode 100644
index 0000000000..508e0633b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm630-pinctrl.yaml
@@ -0,0 +1,181 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sdm630-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM630 and SDM660 TLMM pin controller
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm SDM630 and SDM660 SoC.
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - qcom,sdm630-pinctrl
+ - qcom,sdm660-pinctrl
+
+ reg:
+ maxItems: 3
+
+ reg-names:
+ items:
+ - const: south
+ - const: center
+ - const: north
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 57
+
+ gpio-line-names:
+ maxItems: 114
+
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sdm630-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sdm630-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sdm630-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-3])$"
+ - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk,
+ sdc2_cmd, sdc2_data ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+ enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1,
+ atest_char2, atest_char3, atest_gpsadc0, atest_gpsadc1,
+ atest_tsens, atest_tsens2, atest_usb1, atest_usb10,
+ atest_usb11, atest_usb12, atest_usb13, atest_usb2, atest_usb20,
+ atest_usb21, atest_usb22, atest_usb23, audio_ref, bimc_dte0,
+ bimc_dte1, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4,
+ blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8_a, blsp_i2c8_b,
+ blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi3_cs1, blsp_spi3_cs2,
+ blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7, blsp_spi8_a,
+ blsp_spi8_b, blsp_spi8_cs1, blsp_spi8_cs2, blsp_uart1,
+ blsp_uart2, blsp_uart5, blsp_uart6_a, blsp_uart6_b, blsp_uim1,
+ blsp_uim2, blsp_uim5, blsp_uim6, cam_mclk, cci_async, cci_i2c,
+ cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, gcc_gp1,
+ gcc_gp2, gcc_gp3, gpio, gps_tx_a, gps_tx_b, gps_tx_c,
+ isense_dbg, jitter_bist, ldo_en, ldo_update, m_voc, mdp_vsync,
+ mdss_vsync0, mdss_vsync1, mdss_vsync2, mdss_vsync3, mss_lte,
+ nav_pps_a, nav_pps_b, nav_pps_c, pa_indicator, phase_flag0,
+ phase_flag1, phase_flag10, phase_flag11, phase_flag12,
+ phase_flag13, phase_flag14, phase_flag15, phase_flag16,
+ phase_flag17, phase_flag18, phase_flag19, phase_flag2,
+ phase_flag20, phase_flag21, phase_flag22, phase_flag23,
+ phase_flag24, phase_flag25, phase_flag26, phase_flag27,
+ phase_flag28, phase_flag29, phase_flag3, phase_flag30,
+ phase_flag31, phase_flag4, phase_flag5, phase_flag6,
+ phase_flag7, phase_flag8, phase_flag9, pll_bypassnl, pll_reset,
+ pri_mi2s, pri_mi2s_ws, prng_rosc, pwr_crypto, pwr_modem,
+ pwr_nav, qdss_cti0_a, qdss_cti0_b, qdss_cti1_a, qdss_cti1_b,
+ qdss_gpio, qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11,
+ qdss_gpio12, qdss_gpio13, qdss_gpio14, qdss_gpio15, qdss_gpio2,
+ qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, qdss_gpio7,
+ qdss_gpio8, qdss_gpio9, qlink_enable, qlink_request, qspi_clk,
+ qspi_cs, qspi_data0, qspi_data1, qspi_data2, qspi_data3,
+ qspi_resetn, sec_mi2s, sndwire_clk, sndwire_data, sp_cmu,
+ ssc_irq, tgu_ch0, tgu_ch1, tsense_pwm1, tsense_pwm2, uim1_clk,
+ uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data,
+ uim2_present, uim2_reset, uim_batt, vfr_1, vsense_clkout,
+ vsense_data0, vsense_data1, vsense_mode, wlan1_adc0,
+ wlan1_adc1, wlan2_adc0, wlan2_adc1 ]
+
+ required:
+ - pins
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ tlmm: pinctrl@3100000 {
+ compatible = "qcom,sdm630-pinctrl";
+ reg = <0x03100000 0x400000>,
+ <0x03500000 0x400000>,
+ <0x03900000 0x400000>;
+ reg-names = "south", "center", "north";
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ gpio-ranges = <&tlmm 0 0 114>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ blsp1-uart1-default-state {
+ pins = "gpio0", "gpio1", "gpio2", "gpio3";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ blsp2_uart1_default: blsp2-uart1-active-state {
+ tx-rts-pins {
+ pins = "gpio16", "gpio19";
+ function = "blsp_uart5";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rx-pins {
+ pins = "gpio17";
+ function = "blsp_uart5";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ cts-pins {
+ pins = "gpio18";
+ function = "blsp_uart5";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml
new file mode 100644
index 0000000000..84a15f77e7
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sdm670-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SDM670 TLMM block
+
+maintainers:
+ - Richard Acayan <mailingradian@gmail.com>
+
+description: |
+ The Top Level Mode Multiplexer (TLMM) block found in the SDM670 platform.
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sdm670-tlmm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 75
+
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sdm670-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sdm670-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sdm670-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$"
+ - enum: [ ufs_reset, sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data,
+ sdc2_clk, sdc2_cmd, sdc2_data ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ adsp_ext, agera_pll, atest_char, atest_tsens, atest_tsens2, atest_usb1, atest_usb10,
+ atest_usb11, atest_usb12, atest_usb13, atest_usb2, atest_usb20, atest_usb21,
+ atest_usb22, atest_usb23, cam_mclk, cci_async, cci_i2c, cci_timer0, cci_timer1,
+ cci_timer2, cci_timer3, cci_timer4, copy_gp, copy_phase, dbg_out, ddr_bist,
+ ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, edp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3,
+ gp_pdm0, gp_pdm1, gp_pdm2, gpio, gps_tx, jitter_bist, ldo_en, ldo_update,
+ lpass_slimbus, m_voc, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3,
+ mss_lte, nav_pps, pa_indicator, pci_e0, pci_e1, phase_flag, pll_bist, pll_bypassnl,
+ pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc, qdss_cti, qdss, qlink_enable,
+ qlink_request, qua_mi2s, qup0, qup1, qup10, qup11, qup12, qup13, qup14, qup15, qup2,
+ qup3, qup4, qup5, qup6, qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sdc4_clk,
+ sdc4_cmd, sdc4_data, sd_write, sec_mi2s, ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2,
+ tgu_ch3, tsif1_clk, tsif1_data, tsif1_en, tsif1_error, tsif1_sync, tsif2_clk,
+ tsif2_data, tsif2_en, tsif2_error, tsif2_sync, uim1_clk, uim1_data, uim1_present,
+ uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset, uim_batt, usb_phy, vfr_1,
+ vsense_trigger, wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data, ]
+
+ required:
+ - pins
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ pinctrl@3400000 {
+ compatible = "qcom,sdm670-tlmm";
+ reg = <0x03400000 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 151>;
+
+ qup-i2c9-state {
+ pins = "gpio6", "gpio7";
+ function = "qup9";
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml
new file mode 100644
index 0000000000..d301881ddf
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sdm845-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM845 TLMM pin controller
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm SDM845 SoC.
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sdm845-pinctrl
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 75
+
+ gpio-line-names:
+ maxItems: 150
+
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sdm845-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sdm845-tlmm-state"
+ additionalProperties: false
+
+ "-hog(-[0-9]+)?$":
+ required:
+ - gpio-hog
+
+$defs:
+ qcom-sdm845-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$"
+ - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+ enum: [ adsp_ext, agera_pll, atest_char, atest_tsens, atest_tsens2,
+ atest_usb1, atest_usb10, atest_usb11, atest_usb12, atest_usb13,
+ atest_usb2, atest_usb20, atest_usb21, atest_usb22, atest_usb23,
+ audio_ref, btfm_slimbus, cam_mclk, cci_async, cci_i2c,
+ cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
+ cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0,
+ ddr_pxi1, ddr_pxi2, ddr_pxi3, edp_hot, edp_lcd, gcc_gp1,
+ gcc_gp2, gcc_gp3, gpio, jitter_bist, ldo_en, ldo_update,
+ lpass_slimbus, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
+ mdp_vsync3, mss_lte, m_voc, nav_pps, pa_indicator, pci_e0,
+ pci_e1, phase_flag, pll_bist, pll_bypassnl, pll_reset,
+ pri_mi2s, pri_mi2s_ws, prng_rosc, qdss, qdss_cti, qlink_enable,
+ qlink_request, qspi_clk, qspi_cs, qspi_data, qua_mi2s, qup0,
+ qup1, qup10, qup11, qup12, qup13, qup14, qup15, qup2, qup3,
+ qup4, qup5, qup6, qup7, qup8, qup9, qup_l4, qup_l5, qup_l6,
+ sdc4_clk, sdc4_cmd, sdc4_data, sd_write, sec_mi2s, sp_cmu,
+ spkr_i2s, ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3,
+ tsense_pwm1, tsense_pwm2, tsif1_clk, tsif1_data, tsif1_en,
+ tsif1_error, tsif1_sync, tsif2_clk, tsif2_data, tsif2_en,
+ tsif2_error, tsif2_sync, uim1_clk, uim1_data, uim1_present,
+ uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset,
+ uim_batt, usb_phy, vfr_1, vsense_trigger, wlan1_adc0,
+ wlan1_adc1, wlan2_adc0, wlan2_adc1]
+
+ required:
+ - pins
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ pinctrl@3400000 {
+ compatible = "qcom,sdm845-pinctrl";
+ reg = <0x03400000 0xc00000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 151>;
+ wakeup-parent = <&pdc_intc>;
+
+ ap-suspend-l-hog {
+ gpio-hog;
+ gpios = <126 GPIO_ACTIVE_LOW>;
+ output-low;
+ };
+
+ cci0-default-state {
+ pins = "gpio17", "gpio18";
+ function = "cci_i2c";
+
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ cam0-default-state {
+ rst-pins {
+ pins = "gpio9";
+ function = "gpio";
+
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ mclk0-pins {
+ pins = "gpio13";
+ function = "cam_mclk";
+
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
new file mode 100644
index 0000000000..67af99dd8f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx55-pinctrl.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sdx55-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SDX55 TLMM block
+
+maintainers:
+ - Vinod Koul <vkoul@kernel.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm SDX55 SoC.
+
+properties:
+ compatible:
+ const: qcom,sdx55-pinctrl
+
+ reg:
+ description: Specifies the base address and size of the TLMM register space
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ "#gpio-cells": true
+ gpio-ranges: true
+
+ gpio-reserved-ranges:
+ maxItems: 1
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sdx55-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sdx55-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sdx55-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-7])$"
+ - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins. Functions are only valid for gpio pins.
+ enum: [ adsp_ext, atest, audio_ref, bimc_dte0, bimc_dte1, blsp_i2c1,
+ blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_spi1, blsp_spi2,
+ blsp_spi3, blsp_spi4, blsp_uart1, blsp_uart2, blsp_uart3,
+ blsp_uart4, char_exec, coex_uart, coex_uart2, cri_trng,
+ cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0,
+ ebi0_wrcdc, ebi2_a, ebi2_lcd, emac_gcc0, emac_gcc1,
+ emac_pps0, emac_pps1, ext_dbg, gcc_gp1, gcc_gp2, gcc_gp3,
+ gcc_plltest, gpio, i2s_mclk, jitter_bist, ldo_en, ldo_update,
+ mgpi_clk, m_voc, native_char, native_char0, native_char1,
+ native_char2, native_char3, native_tsens, native_tsense,
+ nav_gpio, pa_indicator, pcie_clkreq, pci_e, pll_bist, pll_ref,
+ pll_test, pri_mi2s, prng_rosc, qdss_cti, qdss_gpio,
+ qdss_gpio0, qdss_gpio1, qdss_gpio2, qdss_gpio3, qdss_gpio4,
+ qdss_gpio5, qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9,
+ qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13,
+ qdss_gpio14, qdss_gpio15, qdss_stm0, qdss_stm1, qdss_stm2,
+ qdss_stm3, qdss_stm4, qdss_stm5, qdss_stm6, qdss_stm7,
+ qdss_stm8, qdss_stm9, qdss_stm10, qdss_stm11, qdss_stm12,
+ qdss_stm13, qdss_stm14, qdss_stm15, qdss_stm16, qdss_stm17,
+ qdss_stm18, qdss_stm19, qdss_stm20, qdss_stm21, qdss_stm22,
+ qdss_stm23, qdss_stm24, qdss_stm25, qdss_stm26, qdss_stm27,
+ qdss_stm28, qdss_stm29, qdss_stm30, qdss_stm31, qlink0_en,
+ qlink0_req, qlink0_wmss, qlink1_en, qlink1_req, qlink1_wmss,
+ spmi_coex, sec_mi2s, spmi_vgi, tgu_ch0, uim1_clk, uim1_data,
+ uim1_present, uim1_reset, uim2_clk, uim2_data, uim2_present,
+ uim2_reset, usb2phy_ac, vsense_trigger ]
+
+ required:
+ - pins
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ tlmm: pinctrl@1f00000 {
+ compatible = "qcom,sdx55-pinctrl";
+ reg = <0x0f100000 0x300000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 108>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+
+ serial-state {
+ pins = "gpio8", "gpio9";
+ function = "blsp_uart3";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml
new file mode 100644
index 0000000000..27319782d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sdx65-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SDX65 TLMM block
+
+maintainers:
+ - Vamsi krishna Lanka <quic_vamslank@quicinc.com>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm SDX65 SoC.
+
+properties:
+ compatible:
+ const: qcom,sdx65-tlmm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ "#gpio-cells": true
+ gpio-ranges: true
+
+ gpio-reserved-ranges:
+ maxItems: 1
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sdx65-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sdx65-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sdx65-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-7])$"
+ - enum: [ ufs_reset, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data, sdc1_rclk ]
+ minItems: 1
+ maxItems: 150
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins. Functions are only valid for gpio pins.
+ enum: [ blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens,
+ bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8,
+ qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b,
+ dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10,
+ blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12,
+ mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11,
+ atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, atest_char,
+ cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, qdss_tracedata_b,
+ pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, cci_i2c,
+ qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4,
+ qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5,
+ atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6,
+ atest_usb20, atest_char0, dac_calib10, qdss_stm10,
+ qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, blsp_uim6,
+ blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11,
+ qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1,
+ qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11,
+ dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6,
+ qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14,
+ dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem,
+ dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto,
+ dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0, pcie_clkreq,
+ dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25,
+ sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2,
+ qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3,
+ uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9,
+ blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7,
+ qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, blsp_uart11,
+ blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, cri_trng0,
+ cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, blsp_spi4,
+ blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4,
+ qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus,
+ isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s,
+ qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b,
+ sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b,
+ gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12,
+ qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29,
+ tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27,
+ qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk,
+ sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b,
+ sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b,
+ ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, blsp11_uart_rx_b,
+ blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, uim_batt,
+ pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11,
+ qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx,
+ qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3,
+ gpio ]
+
+ required:
+ - pins
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ tlmm: pinctrl@f100000 {
+ compatible = "qcom,sdx65-tlmm";
+ reg = <0x03000000 0xdc2000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 109>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-wo-subnode-state {
+ pins = "gpio1";
+ function = "gpio";
+ };
+
+ uart-w-subnodes-state {
+ rx-pins {
+ pins = "gpio4";
+ function = "blsp_uart1";
+ bias-pull-up;
+ };
+
+ tx-pins {
+ pins = "gpio5";
+ function = "blsp_uart1";
+ bias-disable;
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml
new file mode 100644
index 0000000000..7cb96aa75b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sdx75-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SDX75 TLMM block
+
+maintainers:
+ - Rohit Agarwal <quic_rohiagar@quicinc.com>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm SDX75 SoC.
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sdx75-tlmm
+
+ reg:
+ maxItems: 1
+
+ interrupts: true
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 67
+
+ gpio-line-names:
+ maxItems: 133
+
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sdx75-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sdx75-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sdx75-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-2])$"
+ - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk, sdc2_cmd, sdc2_data ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+ enum: [ adsp_ext, atest_char, audio_ref_clk, bimc_dte, char_exec, coex_uart2,
+ coex_uart, cri_trng, cri_trng0, cri_trng1, dbg_out_clk, ddr_bist,
+ ddr_pxi0, ebi0_wrcdc, ebi2_a, ebi2_lcd, ebi2_lcd_te, emac0_mcg,
+ emac0_ptp, emac1_mcg, emac1_ptp, emac_cdc, emac_pps_in, eth0_mdc,
+ eth0_mdio, eth1_mdc, eth1_mdio, ext_dbg, gcc_125_clk, gcc_gp1_clk,
+ gcc_gp2_clk, gcc_gp3_clk, gcc_plltest, gpio, i2s_mclk, jitter_bist,
+ ldo_en, ldo_update, m_voc, mgpi_clk, native_char, native_tsens,
+ native_tsense, nav_dr_sync, nav_gpio, pa_indicator, pci_e,
+ pcie0_clkreq_n, pcie1_clkreq_n, pcie2_clkreq_n, pll_bist_sync,
+ pll_clk_aux, pll_ref_clk, pri_mi2s, prng_rosc, qdss_cti, qdss_gpio,
+ qlink0_b_en, qlink0_b_req, qlink0_l_en, qlink0_l_req, qlink0_wmss,
+ qlink1_l_en, qlink1_l_req, qlink1_wmss, qup_se0, qup_se1_l2_mira,
+ qup_se1_l2_mirb, qup_se1_l3_mira, qup_se1_l3_mirb, qup_se2, qup_se3,
+ qup_se4, qup_se5, qup_se6, qup_se7, qup_se8, rgmii_rx_ctl, rgmii_rxc,
+ rgmii_rxd, rgmii_tx_ctl, rgmii_txc, rgmii_txd, sd_card, sdc1_tb,
+ sdc2_tb_trig, sec_mi2s, sgmii_phy_intr0_n, sgmii_phy_intr1_n,
+ spmi_coex, spmi_vgi, tgu_ch0_trigout, tmess_prng0, tmess_prng1,
+ tmess_prng2, tmess_prng3, tri_mi2s, uim1_clk, uim1_data, uim1_present,
+ uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset,
+ usb2phy_ac_en, vsense_trigger_mirnat]
+
+ required:
+ - pins
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ tlmm: pinctrl@f100000 {
+ compatible = "qcom,sdx75-tlmm";
+ reg = <0x0f100000 0x300000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 133>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-wo-state {
+ pins = "gpio1";
+ function = "gpio";
+ };
+
+ uart-w-state {
+ rx-pins {
+ pins = "gpio12";
+ function = "qup_se1_l2_mira";
+ bias-disable;
+ };
+
+ tx-pins {
+ pins = "gpio13";
+ function = "qup_se1_l3_mira";
+ bias-disable;
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml
new file mode 100644
index 0000000000..abac3311fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6115 SoC LPASS LPI TLMM
+
+maintainers:
+ - Konrad Dybcio <konradybcio@kernel.org>
+ - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem
+ (LPASS) Low Power Island (LPI) of Qualcomm SM6115 SoC.
+
+properties:
+ compatible:
+ const: qcom,sm6115-lpass-lpi-pinctrl
+
+ reg:
+ items:
+ - description: LPASS LPI TLMM Control and Status registers
+ - description: LPASS LPI MCC registers
+
+ clocks:
+ items:
+ - description: LPASS Audio voting clock
+
+ clock-names:
+ items:
+ - const: audio
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ description: Specifying the pin number and flags, as defined in
+ include/dt-bindings/gpio/gpio.h
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sm6115-lpass-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sm6115-lpass-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sm6115-lpass-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: /schemas/pinctrl/pincfg-node.yaml
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ pattern: "^gpio([0-9]|1[0-8])$"
+
+ function:
+ enum: [ dmic01_clk, dmic01_data, dmic23_clk, dmic23_data, gpio, i2s1_clk,
+ i2s1_data, i2s1_ws, i2s2_clk, i2s2_data, i2s2_ws, i2s3_clk,
+ i2s3_data, i2s3_ws, qua_mi2s_data, qua_mi2s_sclk, qua_mi2s_ws,
+ swr_rx_clk, swr_rx_data, swr_tx_clk, swr_tx_data, wsa_mclk ]
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ drive-strength:
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+ default: 2
+ description:
+ Selects the drive strength for the specified pins, in mA.
+
+ slew-rate:
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ 0: No adjustments
+ 1: Higher Slew rate (faster edges)
+ 2: Lower Slew rate (slower edges)
+ 3: Reserved (No adjustments)
+
+ bias-bus-hold: true
+ bias-pull-down: true
+ bias-pull-up: true
+ bias-disable: true
+ input-enable: true
+ output-high: true
+ output-low: true
+
+ required:
+ - pins
+ - function
+
+ additionalProperties: false
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - gpio-controller
+ - "#gpio-cells"
+ - gpio-ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/sound/qcom,q6afe.h>
+
+ lpass_tlmm: pinctrl@a7c0000 {
+ compatible = "qcom,sm6115-lpass-lpi-pinctrl";
+ reg = <0x0a7c0000 0x20000>,
+ <0x0a950000 0x10000>;
+ clocks = <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+ clock-names = "audio";
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&lpass_tlmm 0 0 19>;
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml
new file mode 100644
index 0000000000..871df54f69
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm6115-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM6115, SM4250 TLMM block
+
+maintainers:
+ - Iskren Chernev <iskren.chernev@gmail.com>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm SM4250 and SM6115
+ SoCs.
+
+properties:
+ compatible:
+ const: qcom,sm6115-tlmm
+
+ reg:
+ maxItems: 3
+
+ reg-names:
+ items:
+ - const: west
+ - const: south
+ - const: east
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ "#gpio-cells": true
+ gpio-ranges: true
+ gpio-reserved-ranges: true
+ wakeup-parent: true
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sm6115-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sm6115-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sm6115-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-2])$"
+ - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data,
+ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ adsp_ext, agera_pll, atest, cam_mclk, cci_async, cci_i2c,
+ cci_timer, cri_trng, dac_calib, dbg_out, ddr_bist, ddr_pxi0,
+ ddr_pxi1, ddr_pxi2, ddr_pxi3, gcc_gp1, gcc_gp2, gcc_gp3, gpio,
+ gp_pdm0, gp_pdm1, gp_pdm2, gsm0_tx, gsm1_tx, jitter_bist,
+ mdp_vsync, mdp_vsync_out_0, mdp_vsync_out_1, mpm_pwr, mss_lte,
+ m_voc, nav_gpio, pa_indicator, pbs, pbs_out, phase_flag,
+ pll_bist, pll_bypassnl, pll_reset, prng_rosc, qdss_cti,
+ qdss_gpio, qup0, qup1, qup2, qup3, qup4, qup5, sdc1_tb,
+ sdc2_tb, sd_write, ssbi_wtr1, tgu, tsense_pwm, uim1_clk,
+ uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data,
+ uim2_present, uim2_reset, usb_phy, vfr_1, vsense_trigger,
+ wlan1_adc0, elan1_adc1 ]
+
+ required:
+ - pins
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+ - compatible
+ - reg
+ - reg-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ tlmm: pinctrl@500000 {
+ compatible = "qcom,sm6115-tlmm";
+ reg = <0x500000 0x400000>,
+ <0x900000 0x400000>,
+ <0xd00000 0x400000>;
+ reg-names = "west", "south", "east";
+ interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 114>;
+
+ sdc2_on_state: sdc2-on-state {
+ clk-pins {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ cmd-pins {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ data-pins {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ sd-cd-pins {
+ pins = "gpio88";
+ function = "gpio";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml
new file mode 100644
index 0000000000..8d77707b02
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm6125-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: Qualcomm Technologies, Inc. SM6125 TLMM block
+
+maintainers:
+ - Martin Botka <martin.botka@somainline.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm SM6125 SoC.
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm6125-tlmm
+
+ reg:
+ maxItems: 3
+
+ reg-names:
+ items:
+ - const: west
+ - const: south
+ - const: east
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ gpio-reserved-ranges: true
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+required:
+ - compatible
+ - reg
+ - reg-names
+
+additionalProperties: false
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sm6125-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sm6125-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sm6125-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio[0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-2]$"
+ - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1,
+ atest_char2, atest_char3, atest_tsens, atest_tsens2, atest_usb1,
+ atest_usb10, atest_usb11, atest_usb12, atest_usb13, atest_usb2,
+ atest_usb20, atest_usb21, atest_usb22, atest_usb23, aud_sb,
+ audio_ref, cam_mclk, cci_async, cci_i2c, cci_timer0, cci_timer1,
+ cci_timer2, cci_timer3, cci_timer4, copy_gp, copy_phase, cri_trng,
+ cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+ ddr_pxi2, ddr_pxi3, debug_hot, dmic0_clk, dmic0_data, dmic1_clk,
+ dmic1_data, dp_hot, edp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3,
+ gp_pdm0, gp_pdm1, gp_pdm2, gpio, gps_tx, jitter_bist, ldo_en,
+ ldo_update, m_voc, mclk1, mclk2, mdp_vsync, mdp_vsync0, mdp_vsync1,
+ mdp_vsync2, mdp_vsync3, mdp_vsync4, mdp_vsync5, mpm_pwr, mss_lte,
+ nav_pps, pa_indicator, phase_flag, pll_bist, pll_bypassnl, pll_reset,
+ pri_mi2s, pri_mi2s_ws, prng_rosc, qca_sb, qdss_cti, qdss, qlink_enable,
+ qlink_request, qua_mi2s, qui_mi2s, qup00, qup01, qup02, qup03, qup04,
+ qup10, qup11, qup12, qup13, qup14, sd_write, sec_mi2s, sp_cmu, swr_rx,
+ swr_tx, ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm,
+ uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data,
+ uim2_present, uim2_reset, unused1, unused2, usb_phy, vfr_1, vsense_trigger,
+ wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data ]
+
+
+ required:
+ - pins
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ pinctrl@500000 {
+ compatible = "qcom,sm6125-tlmm";
+ reg = <0x00500000 0x400000>,
+ <0x00900000 0x400000>,
+ <0x00d00000 0x400000>;
+ reg-names = "west", "south", "east";
+ interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ gpio-ranges = <&tlmm 0 0 134>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ sdc2-off-state {
+ clk-pins {
+ pins = "sdc2_clk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cmd-pins {
+ pins = "sdc2_cmd";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ data-pins {
+ pins = "sdc2_data";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml
new file mode 100644
index 0000000000..27af379cf7
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm6350-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM6350 TLMM block
+
+maintainers:
+ - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm SM6350 SoC.
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm6350-tlmm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 9
+ maxItems: 9
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 78
+
+ gpio-line-names:
+ maxItems: 156
+
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sm6350-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sm6350-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sm6350-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-5])$"
+ - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1, atest_char2,
+ atest_char3, atest_tsens, atest_tsens2, atest_usb1, atest_usb10, atest_usb11,
+ atest_usb12, atest_usb13, atest_usb2, atest_usb20, atest_usb21, atest_usb22,
+ atest_usb23, audio_ref, btfm_slimbus, cam_mclk0, cam_mclk1, cam_mclk2, cam_mclk3,
+ cam_mclk4, cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3,
+ cci_timer4, cri_trng, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3,
+ dp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gp_pdm0, gp_pdm1, gp_pdm2, gpio,
+ gps_tx, ibi_i3c, jitter_bist, ldo_en, ldo_update, lpass_ext, m_voc, mclk,
+ mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s_0, mi2s_1, mi2s_2,
+ mss_lte, nav_gpio, nav_pps, pa_indicator, pcie0_clk, phase_flag0, phase_flag1,
+ phase_flag10, phase_flag11, phase_flag12, phase_flag13, phase_flag14, phase_flag15,
+ phase_flag16, phase_flag17, phase_flag18, phase_flag19, phase_flag2, phase_flag20,
+ phase_flag21, phase_flag22, phase_flag23, phase_flag24, phase_flag25, phase_flag26,
+ phase_flag27, phase_flag28, phase_flag29, phase_flag3, phase_flag30, phase_flag31,
+ phase_flag4, phase_flag5, phase_flag6, phase_flag7, phase_flag8, phase_flag9,
+ pll_bist, pll_bypassnl, pll_reset, prng_rosc, qdss_cti, qdss_gpio, qdss_gpio0,
+ qdss_gpio1, qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14,
+ qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6,
+ qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable, qlink0_request, qlink0_wmss,
+ qlink1_enable, qlink1_request, qlink1_wmss, qup00, qup01, qup02, qup10, qup11,
+ qup12, qup13_f1, qup13_f2, qup14, rffe0_clk, rffe0_data, rffe1_clk, rffe1_data,
+ rffe2_clk, rffe2_data, rffe3_clk, rffe3_data, rffe4_clk, rffe4_data, sd_write,
+ sdc1_tb, sdc2_tb, sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1,
+ tsense_pwm2, uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data,
+ uim2_present, uim2_reset, usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1,
+ wlan2_adc0, wlan2_adc1, ]
+
+ required:
+ - pins
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ pinctrl@f100000 {
+ compatible = "qcom,sm6350-tlmm";
+ reg = <0x0f100000 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 157>;
+
+ gpio-wo-subnode-state {
+ pins = "gpio1";
+ function = "gpio";
+ };
+
+ uart-w-subnodes-state {
+ rx-pins {
+ pins = "gpio25";
+ function = "qup13_f2";
+ bias-disable;
+ };
+
+ tx-pins {
+ pins = "gpio26";
+ function = "qup13_f2";
+ bias-disable;
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml
new file mode 100644
index 0000000000..6e02ba2482
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6375-tlmm.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm6375-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM6375 TLMM block
+
+maintainers:
+ - Konrad Dybcio <konrad.dybcio@somainline.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm SM6375 SoC.
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm6375-tlmm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ gpio-reserved-ranges: true
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sm6375-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sm6375-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sm6375-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9]|15[0-5])$"
+ - enum: [ ufs_reset, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk,
+ sdc2_cmd, sdc2_data ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ adsp_ext, agera_pll, atest_char, atest_char0, atest_char1,
+ atest_char2, atest_char3, atest_tsens, atest_tsens2,
+ atest_usb1, atest_usb10, atest_usb11, atest_usb12,
+ atest_usb13, atest_usb2, atest_usb20, atest_usb21,
+ atest_usb22, atest_usb23, audio_ref, btfm_slimbus, cam_mclk,
+ cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2,
+ cci_timer3, cci_timer4, cri_trng, dbg_out, ddr_bist,
+ ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot, edp_lcd,
+ gcc_gp1, gcc_gp2, gcc_gp3, gp_pdm0, gp_pdm1, gp_pdm2, gpio,
+ gps_tx, ibi_i3c, jitter_bist, ldo_en, ldo_update, lpass_ext,
+ m_voc, mclk, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
+ mdp_vsync3, mi2s_0, mi2s_1, mi2s_2, mss_lte, nav_gpio,
+ nav_pps, pa_indicator, phase_flag0, phase_flag1, phase_flag10,
+ phase_flag11, phase_flag12, phase_flag13, phase_flag14,
+ phase_flag15, phase_flag16, phase_flag17, phase_flag18,
+ phase_flag19, phase_flag2, phase_flag20, phase_flag21,
+ phase_flag22, phase_flag23, phase_flag24, phase_flag25,
+ phase_flag26, phase_flag27, phase_flag28, phase_flag29,
+ phase_flag3, phase_flag30, phase_flag31, phase_flag4,
+ phase_flag5, phase_flag6, phase_flag7, phase_flag8,
+ phase_flag9, pll_bist, pll_bypassnl, pll_clk, pll_reset,
+ prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti,
+ qdss_gpio, qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11,
+ qdss_gpio12, qdss_gpio13, qdss_gpio14, qdss_gpio15,
+ qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6,
+ qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable,
+ qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request,
+ qlink1_wmss, qup00, qup01, qup02, qup10, qup11_f1, qup11_f2,
+ qup12, qup13_f1, qup13_f2, qup14, sd_write, sdc1_tb, sdc2_tb,
+ sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1,
+ tsense_pwm2, uim1_clk, uim1_data, uim1_present, uim1_reset,
+ uim2_clk, uim2_data, uim2_present, uim2_reset, usb2phy_ac,
+ usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1,
+ wlan2_adc0, wlan2_adc1 ]
+
+ required:
+ - pins
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ pinctrl@500000 {
+ compatible = "qcom,sm6375-tlmm";
+ reg = <0x00500000 0x800000>;
+ interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 157>; /* GPIOs + ufs_reset */
+
+ gpio-wo-subnode-state {
+ pins = "gpio1";
+ function = "gpio";
+ };
+
+ uart-w-subnodes-state {
+ rx-pins {
+ pins = "gpio18";
+ function = "qup13_f2";
+ bias-pull-up;
+ };
+
+ tx-pins {
+ pins = "gpio19";
+ function = "qup13_f2";
+ bias-disable;
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml
new file mode 100644
index 0000000000..ede0f3acad
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm7150-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM7150 TLMM pin controller
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Danila Tikhonov <danila@jiaxyga.com>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm SM7150 SoC.
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm7150-tlmm
+
+ reg:
+ maxItems: 3
+
+ reg-names:
+ items:
+ - const: west
+ - const: north
+ - const: south
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 60
+
+ gpio-line-names:
+ maxItems: 119
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sm7150-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sm7150-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sm7150-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-8])$"
+ - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk,
+ sdc2_cmd, sdc2_data, ufs_reset ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ gpio, adsp_ext, agera_pll, aoss_cti, atest_char, atest_tsens,
+ atest_tsens2, atest_usb1, atest_usb2, cam_mclk, cci_async,
+ cci_i2c, cci_timer0, cci_timer1, cci_timer2, cci_timer3,
+ cci_timer4, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, ddr_pxi2,
+ ddr_pxi3, edp_hot, edp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gp_pdm0,
+ gp_pdm1, gp_pdm2, gps_tx, jitter_bist, ldo_en, ldo_update,
+ m_voc, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
+ mdp_vsync3, mss_lte, nav_pps_in, nav_pps_out, pa_indicator,
+ pci_e, phase_flag, pll_bist, pll_bypassnl, pll_reset, pri_mi2s,
+ pri_mi2s_ws, prng_rosc, qdss, qdss_cti, qlink_enable,
+ qlink_request, qua_mi2s, qup00, qup01, qup02, qup03, qup04,
+ qup10, qup11, qup12, qup13, qup14, qup15, sd_write, sdc40,
+ sdc41, sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, ter_mi2s,
+ tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsif1_clk, tsif1_data,
+ tsif1_en, tsif1_error, tsif1_sync, tsif2_clk, tsif2_data,
+ tsif2_en, tsif2_error, tsif2_sync, uim1_clk, uim1_data,
+ uim1_present, uim1_reset, uim2_clk, uim2_data, uim2_present,
+ uim2_reset, uim_batt, usb_phy, vfr_1, vsense_trigger,
+ wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk,
+ wsa_data ]
+
+ required:
+ - pins
+
+required:
+ - compatible
+ - reg
+ - reg-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ tlmm: pinctrl@3500000 {
+ compatible = "qcom,sm7150-tlmm";
+ reg = <0x03500000 0x300000>,
+ <0x03900000 0x300000>,
+ <0x03d00000 0x300000>;
+ reg-names = "west", "north", "south";
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-ranges = <&tlmm 0 0 120>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ wakeup-parent = <&pdc>;
+
+ gpio-wo-state {
+ pins = "gpio1";
+ function = "gpio";
+ };
+
+ uart-w-state {
+ rx-pins {
+ pins = "gpio44";
+ function = "qup12";
+ bias-pull-up;
+ };
+
+ tx-pins {
+ pins = "gpio45";
+ function = "qup12";
+ bias-disable;
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml
new file mode 100644
index 0000000000..c643962646
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8150-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8150 TLMM pin controller
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm SM8150 SoC.
+
+properties:
+ compatible:
+ const: qcom,sm8150-pinctrl
+
+ reg:
+ maxItems: 4
+
+ reg-names:
+ items:
+ - const: west
+ - const: east
+ - const: north
+ - const: south
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 88
+
+ gpio-line-names:
+ maxItems: 175
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sm8150-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sm8150-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sm8150-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-6][0-9]|17[0-4])$"
+ - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ adsp_ext, agera_pll, aoss_cti, ddr_pxi2, atest_char,
+ atest_char0, atest_char1, atest_char2, atest_char3, audio_ref,
+ atest_usb1, atest_usb2, atest_usb10, atest_usb11, atest_usb12,
+ atest_usb13, atest_usb20, atest_usb21, atest_usb22,
+ atest_usb23, btfm_slimbus, cam_mclk, cci_async, cci_i2c,
+ cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
+ cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0,
+ ddr_pxi1, ddr_pxi3, edp_hot, edp_lcd, emac_phy, emac_pps,
+ gcc_gp1, gcc_gp2, gcc_gp3, gpio, hs1_mi2s, hs2_mi2s, hs3_mi2s,
+ jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0, mdp_vsync1,
+ mdp_vsync2, mdp_vsync3, mss_lte, m_voc, nav_pps, pa_indicator,
+ pci_e0, phase_flag, pll_bypassnl, pll_bist, pci_e1, pll_reset,
+ pri_mi2s, pri_mi2s_ws, prng_rosc, qdss, qdss_cti,
+ qlink_request, qlink_enable, qspi0, qspi1, qspi2, qspi3,
+ qspi_clk, qspi_cs, qua_mi2s, qup0, qup1, qup2, qup3, qup4,
+ qup5, qup6, qup7, qup8, qup9, qup10, qup11, qup12, qup13,
+ qup14, qup15, qup16, qup17, qup18, qup19, qup_l4, qup_l5,
+ qup_l6, rgmii, sdc4, sd_write, sec_mi2s, spkr_i2s, sp_cmu,
+ ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3, tsense_pwm1,
+ tsense_pwm2, tsif1, tsif2, uim1, uim2, uim_batt, usb2phy_ac,
+ usb_phy, vfr_1, vsense_trigger, wlan1_adc0, wlan1_adc1,
+ wlan2_adc0, wlan2_adc1, wmss_reset ]
+
+ required:
+ - pins
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+ - compatible
+ - reg
+ - reg-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ tlmm: pinctrl@3100000 {
+ compatible = "qcom,sm8150-pinctrl";
+ reg = <0x03100000 0x300000>,
+ <0x03500000 0x300000>,
+ <0x03900000 0x300000>,
+ <0x03d00000 0x300000>;
+ reg-names = "west", "east", "north", "south";
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-ranges = <&tlmm 0 0 176>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ wakeup-parent = <&pdc>;
+
+ qup-spi0-default-state {
+ pins = "gpio0", "gpio1", "gpio2", "gpio3";
+ function = "qup0";
+ drive-strength = <6>;
+ bias-disable;
+ };
+
+ pcie1-default-state {
+ perst-pins {
+ pins = "gpio102";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ clkreq-pins {
+ pins = "gpio103";
+ function = "pci_e1";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ wake-pins {
+ pins = "gpio104";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
new file mode 100644
index 0000000000..4b4be7efc1
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8250 SoC LPASS LPI TLMM
+
+maintainers:
+ - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem
+ (LPASS) Low Power Island (LPI) of Qualcomm SM8250 SoC.
+
+properties:
+ compatible:
+ const: qcom,sm8250-lpass-lpi-pinctrl
+
+ reg:
+ maxItems: 2
+
+ clocks:
+ items:
+ - description: LPASS Core voting clock
+ - description: LPASS Audio voting clock
+
+ clock-names:
+ items:
+ - const: core
+ - const: audio
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ description: Specifying the pin number and flags, as defined in
+ include/dt-bindings/gpio/gpio.h
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sm8250-lpass-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sm8250-lpass-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sm8250-lpass-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: /schemas/pinctrl/pincfg-node.yaml
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|1[0-3])$"
+ minItems: 1
+ maxItems: 14
+
+ function:
+ enum: [ gpio, swr_tx_clk, qua_mi2s_sclk, swr_tx_data, qua_mi2s_ws,
+ qua_mi2s_data, swr_rx_clk, swr_rx_data, dmic1_clk, i2s1_clk,
+ dmic1_data, i2s1_ws, dmic2_clk, dmic2_data, i2s1_data,
+ i2s2_clk, wsa_swr_clk, i2s2_ws, wsa_swr_data, dmic3_clk,
+ dmic3_data, i2s2_data ]
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ drive-strength:
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+ default: 2
+ description:
+ Selects the drive strength for the specified pins, in mA.
+
+ slew-rate:
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ 0: No adjustments
+ 1: Higher Slew rate (faster edges)
+ 2: Lower Slew rate (slower edges)
+ 3: Reserved (No adjustments)
+
+ bias-pull-down: true
+ bias-pull-up: true
+ bias-bus-hold: true
+ bias-disable: true
+ input-enable: true
+ output-high: true
+ output-low: true
+
+ required:
+ - pins
+ - function
+
+ additionalProperties: false
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - gpio-controller
+ - "#gpio-cells"
+ - gpio-ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/sound/qcom,q6afe.h>
+ lpi_tlmm: pinctrl@33c0000 {
+ compatible = "qcom,sm8250-lpass-lpi-pinctrl";
+ reg = <0x33c0000 0x20000>,
+ <0x3550000 0x10000>;
+ clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+ clock-names = "core", "audio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&lpi_tlmm 0 0 14>;
+
+ wsa-swr-active-state {
+ clk-pins {
+ pins = "gpio10";
+ function = "wsa_swr_clk";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ data-pins {
+ pins = "gpio11";
+ function = "wsa_swr_data";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ };
+ };
+
+ tx-swr-sleep-clk-state {
+ pins = "gpio0";
+ function = "swr_tx_clk";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
new file mode 100644
index 0000000000..021c547085
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8250-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM8250 TLMM block
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in the Qualcomm SM8250 SoC.
+
+properties:
+ compatible:
+ const: qcom,sm8250-pinctrl
+
+ reg:
+ maxItems: 3
+
+ reg-names:
+ items:
+ - const: west
+ - const: south
+ - const: north
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 90
+
+ gpio-line-names:
+ maxItems: 180
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sm8250-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sm8250-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sm8250-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$"
+ - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ aoss_cti, atest, audio_ref, cam_mclk, cci_async, cci_i2c,
+ cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng,
+ cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+ ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio,
+ ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0,
+ mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1,
+ mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws,
+ mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1,
+ pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset,
+ pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3,
+ qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14,
+ qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6,
+ qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41,
+ sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1,
+ tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data,
+ tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en,
+ tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ]
+
+ required:
+ - pins
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+required:
+ - compatible
+ - reg
+ - reg-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ pinctrl@1f00000 {
+ compatible = "qcom,sm8250-pinctrl";
+ reg = <0x0f100000 0x300000>,
+ <0x0f500000 0x300000>,
+ <0x0f900000 0x300000>;
+ reg-names = "west", "south", "north";
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 181>; /* GPIOs + ufs_reset */
+ wakeup-parent = <&pdc>;
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml
new file mode 100644
index 0000000000..2e65ae08dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8350-lpass-lpi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8350 SoC LPASS LPI TLMM
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+ - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem
+ (LPASS) Low Power Island (LPI) of Qualcomm SM8350 SoC.
+
+properties:
+ compatible:
+ const: qcom,sm8350-lpass-lpi-pinctrl
+
+ reg:
+ items:
+ - description: LPASS LPI TLMM Control and Status registers
+ - description: LPASS LPI MCC registers
+
+ clocks:
+ items:
+ - description: LPASS Core voting clock
+ - description: LPASS Audio voting clock
+
+ clock-names:
+ items:
+ - const: core
+ - const: audio
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ description: Specifying the pin number and flags, as defined in
+ include/dt-bindings/gpio/gpio.h
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sm8350-lpass-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sm8350-lpass-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sm8350-lpass-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: /schemas/pinctrl/pincfg-node.yaml
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ pattern: "^gpio([0-9]|1[0-9]|2[0-2])$"
+
+ function:
+ enum: [ dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic3_clk,
+ dmic3_data, dmic4_clk, dmic4_data, ext_mclk1_a, ext_mclk1_b,
+ ext_mclk1_c, ext_mclk1_d, ext_mclk1_e, gpio, i2s0_clk,
+ i2s0_data, i2s0_ws, i2s1_clk, i2s1_data, i2s1_ws, i2s2_clk,
+ i2s2_data, i2s2_ws, i2s3_clk, i2s3_data, i2s3_ws, i2s4_clk,
+ i2s4_data, i2s4_ws, slimbus_clk, slimbus_data, swr_rx_clk,
+ swr_rx_data, swr_tx_clk, swr_tx_data, wsa_swr_clk,
+ wsa_swr_data, wsa2_swr_clk, wsa2_swr_data ]
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ drive-strength:
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+ default: 2
+ description:
+ Selects the drive strength for the specified pins, in mA.
+
+ slew-rate:
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ 0: No adjustments
+ 1: Higher Slew rate (faster edges)
+ 2: Lower Slew rate (slower edges)
+ 3: Reserved (No adjustments)
+
+ bias-bus-hold: true
+ bias-pull-down: true
+ bias-pull-up: true
+ bias-disable: true
+ input-enable: true
+ output-high: true
+ output-low: true
+
+ required:
+ - pins
+ - function
+
+ additionalProperties: false
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - gpio-controller
+ - "#gpio-cells"
+ - gpio-ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/sound/qcom,q6afe.h>
+
+ lpass_tlmm: pinctrl@33c0000 {
+ compatible = "qcom,sm8350-lpass-lpi-pinctrl";
+ reg = <0x033c0000 0x20000>,
+ <0x03550000 0x10000>;
+
+ clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+ clock-names = "core", "audio";
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&lpass_tlmm 0 0 15>;
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml
new file mode 100644
index 0000000000..6e8f41ff0a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-tlmm.yaml
@@ -0,0 +1,143 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8350-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM8350 TLMM block
+
+maintainers:
+ - Vinod Koul <vkoul@kernel.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm SM8350 SoC.
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm8350-tlmm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 102
+
+ gpio-line-names:
+ maxItems: 203
+
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sm8350-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sm8350-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sm8350-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-2])$"
+ - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ atest_char, atest_usb, audio_ref, cam_mclk, cci_async,
+ cci_i2c, cci_timer, cmu_rng, coex_uart1, coex_uart2, cri_trng,
+ cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+ ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3,
+ gpio, ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0,
+ mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1,
+ mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck,
+ mi2s1_ws, mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws,
+ mss_grfc0, mss_grfc1, mss_grfc10, mss_grfc11, mss_grfc12,
+ mss_grfc2, mss_grfc3, mss_grfc4, mss_grfc5, mss_grfc6,
+ mss_grfc7, mss_grfc8, mss_grfc9, nav_gpio, pa_indicator,
+ pcie0_clkreqn, pcie1_clkreqn, phase_flag, pll_bist, pll_clk,
+ pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qlink0_enable,
+ qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request,
+ qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss, qspi0,
+ qspi1, qspi2, qspi3, qspi_clk, qspi_cs, qup0, qup1, qup10,
+ qup11, qup12, qup13, qup14, qup15, qup16, qup17, qup18, qup19,
+ qup2, qup3, qup4, qup5, qup6, qup7, qup8, qup9, qup_l4, qup_l5,
+ qup_l6, sd_write, sdc40, sdc41, sdc42, sdc43, sdc4_clk,
+ sdc4_cmd, sec_mi2s, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2,
+ tgu_ch3, tsense_pwm1, tsense_pwm2, uim0_clk, uim0_data,
+ uim0_present, uim0_reset, uim1_clk, uim1_data, uim1_present,
+ uim1_reset, usb2phy_ac, usb_phy, vfr_0, vfr_1, vsense_trigger ]
+
+ required:
+ - pins
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ pinctrl@f100000 {
+ compatible = "qcom,sm8350-tlmm";
+ reg = <0x0f100000 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 204>; /* GPIOs + ufs_reset */
+
+ gpio-wo-subnode-state {
+ pins = "gpio1";
+ function = "gpio";
+ };
+
+ uart-w-subnodes-state {
+ rx-pins {
+ pins = "gpio18";
+ function = "qup3";
+ bias-pull-up;
+ };
+
+ tx-pins {
+ pins = "gpio19";
+ function = "qup3";
+ bias-disable;
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml
new file mode 100644
index 0000000000..1eefa9aa6a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml
@@ -0,0 +1,164 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8450-lpass-lpi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8450 SoC LPASS LPI TLMM
+
+maintainers:
+ - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem
+ (LPASS) Low Power Island (LPI) of Qualcomm SM8450 SoC.
+
+properties:
+ compatible:
+ const: qcom,sm8450-lpass-lpi-pinctrl
+
+ reg:
+ items:
+ - description: LPASS LPI TLMM Control and Status registers
+ - description: LPASS LPI MCC registers
+
+ clocks:
+ items:
+ - description: LPASS Core voting clock
+ - description: LPASS Audio voting clock
+
+ clock-names:
+ items:
+ - const: core
+ - const: audio
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ description: Specifying the pin number and flags, as defined in
+ include/dt-bindings/gpio/gpio.h
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sm8450-lpass-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sm8450-lpass-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sm8450-lpass-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: /schemas/pinctrl/pincfg-node.yaml
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ pattern: "^gpio([0-9]|1[0-9]|2[0-2])$"
+
+ function:
+ enum: [ swr_tx_clk, swr_tx_data, swr_rx_clk, swr_rx_data,
+ dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic4_clk,
+ dmic4_data, i2s2_clk, i2s2_ws, dmic3_clk, dmic3_data,
+ qua_mi2s_sclk, qua_mi2s_ws, qua_mi2s_data, i2s1_clk, i2s1_ws,
+ i2s1_data, wsa_swr_clk, wsa_swr_data, wsa2_swr_clk,
+ wsa2_swr_data, i2s2_data, i2s4_ws, i2s4_clk, i2s4_data,
+ slimbus_clk, i2s3_clk, i2s3_ws, i2s3_data, slimbus_data,
+ ext_mclk1_c, ext_mclk1_b, ext_mclk1_a, ext_mclk1_d,
+ ext_mclk1_e ]
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ drive-strength:
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+ default: 2
+ description:
+ Selects the drive strength for the specified pins, in mA.
+
+ slew-rate:
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ 0: No adjustments
+ 1: Higher Slew rate (faster edges)
+ 2: Lower Slew rate (slower edges)
+ 3: Reserved (No adjustments)
+
+ bias-bus-hold: true
+ bias-pull-down: true
+ bias-pull-up: true
+ bias-disable: true
+ input-enable: true
+ output-high: true
+ output-low: true
+
+ required:
+ - pins
+ - function
+
+ additionalProperties: false
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - gpio-controller
+ - "#gpio-cells"
+ - gpio-ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/sound/qcom,q6afe.h>
+ pinctrl@3440000 {
+ compatible = "qcom,sm8450-lpass-lpi-pinctrl";
+ reg = <0x3440000 0x20000>,
+ <0x34d0000 0x10000>;
+ clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+ clock-names = "core", "audio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&lpi_tlmm 0 0 23>;
+
+ wsa-swr-active-state {
+ clk-pins {
+ pins = "gpio10";
+ function = "wsa_swr_clk";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-disable;
+ };
+
+ data-pins {
+ pins = "gpio11";
+ function = "wsa_swr_data";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ };
+ };
+
+ tx-swr-sleep-clk-state {
+ pins = "gpio0";
+ function = "swr_tx_clk";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml
new file mode 100644
index 0000000000..5163fe3f53
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8450-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM8450 TLMM block
+
+maintainers:
+ - Vinod Koul <vkoul@kernel.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm SM8450 SoC.
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm8450-tlmm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 105
+
+ gpio-line-names:
+ maxItems: 210
+
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sm8450-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sm8450-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sm8450-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])$"
+ - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+ enum: [ aon_cam, atest_char, atest_usb, audio_ref, cam_mclk, cci_async,
+ cci_i2c, cci_timer, cmu_rng, coex_uart1, coex_uart2, cri_trng,
+ cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+ ddr_pxi2, ddr_pxi3, dp_hot, gcc_gp1, gcc_gp2, gcc_gp3,
+ gpio, ibi_i3c, jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1,
+ mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck,
+ mi2s0_ws, mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws,
+ mss_grfc0, mss_grfc1, mss_grfc10, mss_grfc11, mss_grfc12,
+ mss_grfc2, mss_grfc3, mss_grfc4, mss_grfc5, mss_grfc6,
+ mss_grfc7, mss_grfc8, mss_grfc9, nav, pcie0_clkreqn,
+ pcie1_clkreqn, phase_flag, pll_bist, pll_clk, pri_mi2s,
+ prng_rosc, qdss_cti, qdss_gpio, qlink0_enable, qlink0_request,
+ qlink0_wmss, qlink1_enable, qlink1_request, qlink1_wmss,
+ qlink2_enable, qlink2_request, qlink2_wmss, qspi0, qspi1,
+ qspi2, qspi3, qspi_clk, qspi_cs, qup0, qup1, qup10, qup11,
+ qup12, qup13, qup14, qup15, qup16, qup17, qup18, qup19, qup2,
+ qup20, qup21, qup3, qup4, qup5, qup6, qup7, qup8, qup9, qup_l4,
+ qup_l5, qup_l6, sd_write, sdc40, sdc41, sdc42, sdc43, sdc4_clk,
+ sdc4_cmd, sec_mi2s, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2,
+ tgu_ch3, tmess_prng0, tmess_prng1, tmess_prng2, tmess_prng3,
+ tsense_pwm1, tsense_pwm2, uim0_clk, uim0_data, uim0_present,
+ uim0_reset, uim1_clk, uim1_data, uim1_present, uim1_reset,
+ usb2phy_ac, usb_phy, vfr_0, vfr_1, vsense_trigger ]
+
+ required:
+ - pins
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ pinctrl@f100000 {
+ compatible = "qcom,sm8450-tlmm";
+ reg = <0x0f100000 0x300000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 211>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-wo-state {
+ pins = "gpio1";
+ function = "gpio";
+ };
+
+ uart-w-state {
+ rx-pins {
+ pins = "gpio26";
+ function = "qup7";
+ bias-pull-up;
+ };
+
+ tx-pins {
+ pins = "gpio27";
+ function = "qup7";
+ bias-disable;
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml
new file mode 100644
index 0000000000..ef97432468
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml
@@ -0,0 +1,150 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8550 SoC LPASS LPI TLMM
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+ - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem
+ (LPASS) Low Power Island (LPI) of Qualcomm SM8550 SoC.
+
+properties:
+ compatible:
+ const: qcom,sm8550-lpass-lpi-pinctrl
+
+ reg:
+ items:
+ - description: LPASS LPI TLMM Control and Status registers
+ - description: LPASS LPI MCC registers
+
+ clocks:
+ items:
+ - description: LPASS Core voting clock
+ - description: LPASS Audio voting clock
+
+ clock-names:
+ items:
+ - const: core
+ - const: audio
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ description: Specifying the pin number and flags, as defined in
+ include/dt-bindings/gpio/gpio.h
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sm8550-lpass-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sm8550-lpass-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sm8550-lpass-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: /schemas/pinctrl/pincfg-node.yaml
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ pattern: "^gpio([0-9]|1[0-9]|2[0-2])$"
+
+ function:
+ enum: [ dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic3_clk,
+ dmic3_data, dmic4_clk, dmic4_data, ext_mclk1_a, ext_mclk1_b,
+ ext_mclk1_c, ext_mclk1_d, ext_mclk1_e, gpio, i2s0_clk,
+ i2s0_data, i2s0_ws, i2s1_clk, i2s1_data, i2s1_ws, i2s2_clk,
+ i2s2_data, i2s2_ws, i2s3_clk, i2s3_data, i2s3_ws, i2s4_clk,
+ i2s4_data, i2s4_ws, slimbus_clk, slimbus_data, swr_rx_clk,
+ swr_rx_data, swr_tx_clk, swr_tx_data, wsa_swr_clk,
+ wsa_swr_data, wsa2_swr_clk, wsa2_swr_data ]
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ drive-strength:
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+ default: 2
+ description:
+ Selects the drive strength for the specified pins, in mA.
+
+ slew-rate:
+ enum: [0, 1, 2, 3]
+ default: 0
+ description: |
+ 0: No adjustments
+ 1: Higher Slew rate (faster edges)
+ 2: Lower Slew rate (slower edges)
+ 3: Reserved (No adjustments)
+
+ bias-bus-hold: true
+ bias-pull-down: true
+ bias-pull-up: true
+ bias-disable: true
+ input-enable: true
+ output-high: true
+ output-low: true
+
+ required:
+ - pins
+ - function
+
+ additionalProperties: false
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - gpio-controller
+ - "#gpio-cells"
+ - gpio-ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+
+ lpass_tlmm: pinctrl@6e80000 {
+ compatible = "qcom,sm8550-lpass-lpi-pinctrl";
+ reg = <0x06e80000 0x20000>,
+ <0x0725a000 0x10000>;
+
+ clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+ clock-names = "core", "audio";
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&lpass_tlmm 0 0 23>;
+
+ tx-swr-sleep-clk-state {
+ pins = "gpio0";
+ function = "swr_tx_clk";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml
new file mode 100644
index 0000000000..f789c7753a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml
@@ -0,0 +1,154 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8550-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM8550 TLMM block
+
+maintainers:
+ - Abel Vesa <abel.vesa@linaro.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm SM8550 SoC.
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ const: qcom,sm8550-tlmm
+
+ reg:
+ maxItems: 1
+
+ interrupts: true
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 105
+
+ gpio-line-names:
+ maxItems: 210
+
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-sm8550-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-sm8550-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-sm8550-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+ unevaluatedProperties: false
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])$"
+ - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+ enum: [ aon_cci, aoss_cti, atest_char, atest_usb,
+ audio_ext_mclk0, audio_ext_mclk1, audio_ref_clk,
+ cam_aon_mclk4, cam_mclk, cci_async_in, cci_i2c_scl,
+ cci_i2c_sda, cci_timer, cmu_rng, coex_uart1_rx,
+ coex_uart1_tx, coex_uart2_rx, coex_uart2_tx,
+ cri_trng, dbg_out_clk, ddr_bist_complete,
+ ddr_bist_fail, ddr_bist_start, ddr_bist_stop,
+ ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot,
+ gcc_gp1, gcc_gp2, gcc_gp3, gpio, i2chub0_se0,
+ i2chub0_se1, i2chub0_se2, i2chub0_se3, i2chub0_se4,
+ i2chub0_se5, i2chub0_se6, i2chub0_se7, i2chub0_se8,
+ i2chub0_se9, i2s0_data0, i2s0_data1, i2s0_sck,
+ i2s0_ws, i2s1_data0, i2s1_data1, i2s1_sck, i2s1_ws,
+ ibi_i3c, jitter_bist, mdp_vsync, mdp_vsync0_out,
+ mdp_vsync1_out, mdp_vsync2_out, mdp_vsync3_out,
+ mdp_vsync_e, nav_gpio0, nav_gpio1, nav_gpio2,
+ pcie0_clk_req_n, pcie1_clk_req_n, phase_flag,
+ pll_bist_sync, pll_clk_aux, prng_rosc0, prng_rosc1,
+ prng_rosc2, prng_rosc3, qdss_cti, qdss_gpio,
+ qlink0_enable, qlink0_request, qlink0_wmss,
+ qlink1_enable, qlink1_request, qlink1_wmss,
+ qlink2_enable, qlink2_request, qlink2_wmss,
+ qspi0, qspi1, qspi2, qspi3, qspi_clk, qspi_cs,
+ qup1_se0, qup1_se1, qup1_se2, qup1_se3, qup1_se4,
+ qup1_se5, qup1_se6, qup1_se7, qup2_se0,
+ qup2_se0_l0_mira, qup2_se0_l0_mirb, qup2_se0_l1_mira,
+ qup2_se0_l1_mirb, qup2_se0_l2_mira, qup2_se0_l2_mirb,
+ qup2_se0_l3_mira, qup2_se0_l3_mirb, qup2_se1,
+ qup2_se2, qup2_se3, qup2_se4, qup2_se5, qup2_se6,
+ qup2_se7, sd_write_protect, sdc40, sdc41, sdc42,
+ sdc43, sdc4_clk, sdc4_cmd, tb_trig_sdc2, tb_trig_sdc4,
+ tgu_ch0_trigout, tgu_ch1_trigout, tgu_ch2_trigout,
+ tgu_ch3_trigout, tmess_prng0, tmess_prng1, tmess_prng2,
+ tmess_prng3, tsense_pwm1, tsense_pwm2, tsense_pwm3,
+ uim0_clk, uim0_data, uim0_present, uim0_reset,
+ uim1_clk, uim1_data, uim1_present, uim1_reset,
+ usb1_hs, usb_phy, vfr_0, vfr_1, vsense_trigger_mirnat ]
+
+ required:
+ - pins
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ tlmm: pinctrl@f100000 {
+ compatible = "qcom,sm8550-tlmm";
+ reg = <0x0f100000 0x300000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 211>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-wo-state {
+ pins = "gpio1";
+ function = "gpio";
+ };
+
+ uart-w-state {
+ rx-pins {
+ pins = "gpio26";
+ function = "qup2_se7";
+ bias-pull-up;
+ };
+
+ tx-pins {
+ pins = "gpio27";
+ function = "qup2_se7";
+ bias-disable;
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml
new file mode 100644
index 0000000000..aae3dcf6ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,tlmm-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. Top Level Mode Multiplexer (TLMM) definitions
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+ This defines the common properties used to describe all Qualcomm Top Level
+ Mode Multiplexer bindings and pinconf/pinmux states for these.
+
+properties:
+ interrupts:
+ description:
+ TLMM summary IRQ and dirconn interrupts.
+ minItems: 1
+ maxItems: 9
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ description:
+ Specifies the PIN numbers and Flags, as defined in defined in
+ include/dt-bindings/interrupt-controller/irq.h
+ const: 2
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ description:
+ Specifying the pin number and flags, as defined in
+ include/dt-bindings/gpio/gpio.h
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ wakeup-parent:
+ description:
+ Specifying the interrupt-controller used to wake up the system when the
+ TLMM block has been powered down.
+
+ gpio-reserved-ranges:
+ description:
+ Pins can be reserved for trusted applications and thereby unaccessible
+ from the OS. This property can be used to mark the pins which resources
+ should not be accessed by the OS. Please see the ../gpio/gpio.txt for more
+ information.
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+
+additionalProperties: true
+
+$defs:
+ qcom-tlmm-state:
+ properties:
+ drive-strength:
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+ description:
+ Selects the drive strength for the specified pins, in mA.
+
+ bias-pull-down: true
+ bias-pull-up: true
+ bias-disable: true
+ input-enable: false
+ output-disable: true
+ output-enable: true
+ output-high: true
+ output-low: true
+
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+ - if:
+ properties:
+ pins:
+ items:
+ pattern: "^gpio"
+ then:
+ required:
+ - function
+ else:
+ properties:
+ function: false
+
+ additionalProperties: true
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
new file mode 100644
index 0000000000..43b33dbf11
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ralink,rt2880-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink RT2880 Pin Controller
+
+maintainers:
+ - Arınç ÜNAL <arinc.unal@arinc9.com>
+ - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |
+ Ralink RT2880 pin controller for RT2880 SoC.
+ The pin controller can only set the muxing of pin groups. Muxing individual
+ pins is not supported. There is no pinconf support.
+
+properties:
+ compatible:
+ const: ralink,rt2880-pinctrl
+
+patternProperties:
+ '-pins$':
+ type: object
+ additionalProperties: false
+
+ patternProperties:
+ '^(.*-)?pinmux$':
+ type: object
+ description: node for pinctrl.
+ $ref: pinmux-node.yaml#
+ additionalProperties: false
+
+ properties:
+ function:
+ description:
+ A string containing the name of the function to mux to the group.
+ enum: [gpio, i2c, spi, uartlite, jtag, mdio, sdram, pci]
+
+ groups:
+ description:
+ An array of strings. Each string contains the name of a group.
+ maxItems: 1
+
+ required:
+ - groups
+ - function
+
+ allOf:
+ - if:
+ properties:
+ function:
+ const: gpio
+ then:
+ properties:
+ groups:
+ enum: [i2c, spi, uartlite, jtag, mdio, sdram, pci]
+
+ - if:
+ properties:
+ function:
+ const: i2c
+ then:
+ properties:
+ groups:
+ enum: [i2c]
+
+ - if:
+ properties:
+ function:
+ const: spi
+ then:
+ properties:
+ groups:
+ enum: [spi]
+
+ - if:
+ properties:
+ function:
+ const: uartlite
+ then:
+ properties:
+ groups:
+ enum: [uartlite]
+
+ - if:
+ properties:
+ function:
+ const: jtag
+ then:
+ properties:
+ groups:
+ enum: [jtag]
+
+ - if:
+ properties:
+ function:
+ const: mdio
+ then:
+ properties:
+ groups:
+ enum: [mdio]
+
+ - if:
+ properties:
+ function:
+ const: sdram
+ then:
+ properties:
+ groups:
+ enum: [sdram]
+
+ - if:
+ properties:
+ function:
+ const: pci
+ then:
+ properties:
+ groups:
+ enum: [pci]
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ pinctrl {
+ compatible = "ralink,rt2880-pinctrl";
+
+ i2c_pins: i2c0-pins {
+ pinmux {
+ groups = "i2c";
+ function = "i2c";
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml
new file mode 100644
index 0000000000..95a9042730
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml
@@ -0,0 +1,206 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ralink,rt305x-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink RT305X Pin Controller
+
+maintainers:
+ - Arınç ÜNAL <arinc.unal@arinc9.com>
+ - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |
+ Ralink RT305X pin controller for RT3050, RT3052, and RT3350 SoCs.
+ The pin controller can only set the muxing of pin groups. Muxing individual
+ pins is not supported. There is no pinconf support.
+
+properties:
+ compatible:
+ const: ralink,rt305x-pinctrl
+
+patternProperties:
+ '-pins$':
+ type: object
+ additionalProperties: false
+
+ patternProperties:
+ '^(.*-)?pinmux$':
+ type: object
+ description: node for pinctrl.
+ $ref: pinmux-node.yaml#
+ additionalProperties: false
+
+ properties:
+ function:
+ description:
+ A string containing the name of the function to mux to the group.
+ enum: [gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, mdio,
+ pcm gpio, pcm i2s, pcm uartf, rgmii, sdram, spi, uartf,
+ uartlite]
+
+ groups:
+ description:
+ An array of strings. Each string contains the name of a group.
+ maxItems: 1
+
+ required:
+ - groups
+ - function
+
+ allOf:
+ - if:
+ properties:
+ function:
+ const: gpio
+ then:
+ properties:
+ groups:
+ enum: [i2c, jtag, mdio, rgmii, sdram, spi, uartf, uartlite]
+
+ - if:
+ properties:
+ function:
+ const: gpio i2s
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: gpio uartf
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: i2c
+ then:
+ properties:
+ groups:
+ enum: [i2c]
+
+ - if:
+ properties:
+ function:
+ const: i2s uartf
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: jtag
+ then:
+ properties:
+ groups:
+ enum: [jtag]
+
+ - if:
+ properties:
+ function:
+ const: mdio
+ then:
+ properties:
+ groups:
+ enum: [mdio]
+
+ - if:
+ properties:
+ function:
+ const: pcm gpio
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: pcm i2s
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: pcm uartf
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: rgmii
+ then:
+ properties:
+ groups:
+ enum: [rgmii]
+
+ - if:
+ properties:
+ function:
+ const: sdram
+ then:
+ properties:
+ groups:
+ enum: [sdram]
+
+ - if:
+ properties:
+ function:
+ const: spi
+ then:
+ properties:
+ groups:
+ enum: [spi]
+
+ - if:
+ properties:
+ function:
+ const: uartf
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: uartlite
+ then:
+ properties:
+ groups:
+ enum: [uartlite]
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ pinctrl {
+ compatible = "ralink,rt305x-pinctrl";
+
+ i2c_pins: i2c0-pins {
+ pinmux {
+ groups = "i2c";
+ function = "i2c";
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt3352-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt3352-pinctrl.yaml
new file mode 100644
index 0000000000..c9bc6cfd83
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt3352-pinctrl.yaml
@@ -0,0 +1,243 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ralink,rt3352-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink RT3352 Pin Controller
+
+maintainers:
+ - Arınç ÜNAL <arinc.unal@arinc9.com>
+ - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |
+ Ralink RT3352 pin controller for RT3352 SoC.
+ The pin controller can only set the muxing of pin groups. Muxing individual
+ pins is not supported. There is no pinconf support.
+
+properties:
+ compatible:
+ const: ralink,rt3352-pinctrl
+
+patternProperties:
+ '-pins$':
+ type: object
+ additionalProperties: false
+
+ patternProperties:
+ '^(.*-)?pinmux$':
+ type: object
+ description: node for pinctrl.
+ $ref: pinmux-node.yaml#
+ additionalProperties: false
+
+ properties:
+ function:
+ description:
+ A string containing the name of the function to mux to the group.
+ enum: [gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led, lna,
+ mdio, pa, pcm gpio, pcm i2s, pcm uartf, rgmii, spi, spi_cs1,
+ uartf, uartlite, wdg_cs1]
+
+ groups:
+ description:
+ An array of strings. Each string contains the name of a group.
+ maxItems: 1
+
+ required:
+ - groups
+ - function
+
+ allOf:
+ - if:
+ properties:
+ function:
+ const: gpio
+ then:
+ properties:
+ groups:
+ enum: [i2c, jtag, led, lna, mdio, pa, rgmii, spi, spi_cs1,
+ uartf, uartlite]
+
+ - if:
+ properties:
+ function:
+ const: gpio i2s
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: gpio uartf
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: i2c
+ then:
+ properties:
+ groups:
+ enum: [i2c]
+
+ - if:
+ properties:
+ function:
+ const: i2s uartf
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: jtag
+ then:
+ properties:
+ groups:
+ enum: [jtag]
+
+ - if:
+ properties:
+ function:
+ const: led
+ then:
+ properties:
+ groups:
+ enum: [led]
+
+ - if:
+ properties:
+ function:
+ const: lna
+ then:
+ properties:
+ groups:
+ enum: [lna]
+
+ - if:
+ properties:
+ function:
+ const: mdio
+ then:
+ properties:
+ groups:
+ enum: [mdio]
+
+ - if:
+ properties:
+ function:
+ const: pa
+ then:
+ properties:
+ groups:
+ enum: [pa]
+
+ - if:
+ properties:
+ function:
+ const: pcm gpio
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: pcm i2s
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: pcm uartf
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: rgmii
+ then:
+ properties:
+ groups:
+ enum: [rgmii]
+
+ - if:
+ properties:
+ function:
+ const: spi
+ then:
+ properties:
+ groups:
+ enum: [spi]
+
+ - if:
+ properties:
+ function:
+ const: spi_cs1
+ then:
+ properties:
+ groups:
+ enum: [spi_cs1]
+
+ - if:
+ properties:
+ function:
+ const: uartf
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: uartlite
+ then:
+ properties:
+ groups:
+ enum: [uartlite]
+
+ - if:
+ properties:
+ function:
+ const: wdg_cs1
+ then:
+ properties:
+ groups:
+ enum: [spi_cs1]
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ pinctrl {
+ compatible = "ralink,rt3352-pinctrl";
+
+ i2c_pins: i2c0-pins {
+ pinmux {
+ groups = "i2c";
+ function = "i2c";
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml
new file mode 100644
index 0000000000..8d14e525b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml
@@ -0,0 +1,261 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ralink,rt3883-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink RT3883 Pin Controller
+
+maintainers:
+ - Arınç ÜNAL <arinc.unal@arinc9.com>
+ - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |
+ Ralink RT3883 pin controller for RT3883 SoC.
+ The pin controller can only set the muxing of pin groups. Muxing individual
+ pins is not supported. There is no pinconf support.
+
+properties:
+ compatible:
+ const: ralink,rt3883-pinctrl
+
+patternProperties:
+ '-pins$':
+ type: object
+ additionalProperties: false
+
+ patternProperties:
+ '^(.*-)?pinmux$':
+ type: object
+ description: node for pinctrl.
+ $ref: pinmux-node.yaml#
+ additionalProperties: false
+
+ properties:
+ function:
+ description:
+ A string containing the name of the function to mux to the group.
+ enum: [ge1, ge2, gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag,
+ lna a, lna g, mdio, pci-dev, pci-fnc, pci-host1, pci-host2,
+ pcm gpio, pcm i2s, pcm uartf, spi, uartf, uartlite]
+
+ groups:
+ description:
+ An array of strings. Each string contains the name of a group.
+ maxItems: 1
+
+ required:
+ - groups
+ - function
+
+ allOf:
+ - if:
+ properties:
+ function:
+ const: ge1
+ then:
+ properties:
+ groups:
+ enum: [ge1]
+
+ - if:
+ properties:
+ function:
+ const: ge2
+ then:
+ properties:
+ groups:
+ enum: [ge2]
+
+ - if:
+ properties:
+ function:
+ const: gpio
+ then:
+ properties:
+ groups:
+ enum: [ge1, ge2, i2c, jtag, lna a, lna g, mdio, pci, spi,
+ uartf, uartlite]
+
+ - if:
+ properties:
+ function:
+ const: gpio i2s
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: gpio uartf
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: i2c
+ then:
+ properties:
+ groups:
+ enum: [i2c]
+
+ - if:
+ properties:
+ function:
+ const: i2s uartf
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: jtag
+ then:
+ properties:
+ groups:
+ enum: [jtag]
+
+ - if:
+ properties:
+ function:
+ const: lna a
+ then:
+ properties:
+ groups:
+ enum: [lna a]
+
+ - if:
+ properties:
+ function:
+ const: lna g
+ then:
+ properties:
+ groups:
+ enum: [lna g]
+
+ - if:
+ properties:
+ function:
+ const: mdio
+ then:
+ properties:
+ groups:
+ enum: [mdio]
+
+ - if:
+ properties:
+ function:
+ const: pci-dev
+ then:
+ properties:
+ groups:
+ enum: [pci]
+
+ - if:
+ properties:
+ function:
+ const: pci-fnc
+ then:
+ properties:
+ groups:
+ enum: [pci]
+
+ - if:
+ properties:
+ function:
+ const: pci-host1
+ then:
+ properties:
+ groups:
+ enum: [pci]
+
+ - if:
+ properties:
+ function:
+ const: pci-host2
+ then:
+ properties:
+ groups:
+ enum: [pci]
+
+ - if:
+ properties:
+ function:
+ const: pcm gpio
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: pcm i2s
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: pcm uartf
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: spi
+ then:
+ properties:
+ groups:
+ enum: [spi]
+
+ - if:
+ properties:
+ function:
+ const: uartf
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: uartlite
+ then:
+ properties:
+ groups:
+ enum: [uartlite]
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ pinctrl {
+ compatible = "ralink,rt3883-pinctrl";
+
+ i2c_pins: i2c0-pins {
+ pinmux {
+ groups = "i2c";
+ function = "i2c";
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt5350-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt5350-pinctrl.yaml
new file mode 100644
index 0000000000..f248202ce8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt5350-pinctrl.yaml
@@ -0,0 +1,206 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/ralink,rt5350-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ralink RT5350 Pin Controller
+
+maintainers:
+ - Arınç ÜNAL <arinc.unal@arinc9.com>
+ - Sergio Paracuellos <sergio.paracuellos@gmail.com>
+
+description: |
+ Ralink RT5350 pin controller for RT5350 SoC.
+ The pin controller can only set the muxing of pin groups. Muxing individual
+ pins is not supported. There is no pinconf support.
+
+properties:
+ compatible:
+ const: ralink,rt5350-pinctrl
+
+patternProperties:
+ '-pins$':
+ type: object
+ additionalProperties: false
+
+ patternProperties:
+ '^(.*-)?pinmux$':
+ type: object
+ description: node for pinctrl.
+ $ref: pinmux-node.yaml#
+ additionalProperties: false
+
+ properties:
+ function:
+ description:
+ A string containing the name of the function to mux to the group.
+ enum: [gpio, gpio i2s, gpio uartf, i2c, i2s uartf, jtag, led,
+ pcm gpio, pcm i2s, pcm uartf, spi, spi_cs1, uartf, uartlite,
+ wdg_cs1]
+
+ groups:
+ description:
+ An array of strings. Each string contains the name of a group.
+ maxItems: 1
+
+ required:
+ - groups
+ - function
+
+ allOf:
+ - if:
+ properties:
+ function:
+ const: gpio
+ then:
+ properties:
+ groups:
+ enum: [i2c, jtag, led, spi, spi_cs1, uartf, uartlite]
+
+ - if:
+ properties:
+ function:
+ const: gpio i2s
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: gpio uartf
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: i2c
+ then:
+ properties:
+ groups:
+ enum: [i2c]
+
+ - if:
+ properties:
+ function:
+ const: i2s uartf
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: jtag
+ then:
+ properties:
+ groups:
+ enum: [jtag]
+
+ - if:
+ properties:
+ function:
+ const: led
+ then:
+ properties:
+ groups:
+ enum: [led]
+
+ - if:
+ properties:
+ function:
+ const: pcm gpio
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: pcm i2s
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: pcm uartf
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: spi
+ then:
+ properties:
+ groups:
+ enum: [spi]
+
+ - if:
+ properties:
+ function:
+ const: spi_cs1
+ then:
+ properties:
+ groups:
+ enum: [spi_cs1]
+
+ - if:
+ properties:
+ function:
+ const: uartf
+ then:
+ properties:
+ groups:
+ enum: [uartf]
+
+ - if:
+ properties:
+ function:
+ const: uartlite
+ then:
+ properties:
+ groups:
+ enum: [uartlite]
+
+ - if:
+ properties:
+ function:
+ const: wdg_cs1
+ then:
+ properties:
+ groups:
+ enum: [spi_cs1]
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ pinctrl {
+ compatible = "ralink,rt5350-pinctrl";
+
+ i2c_pins: i2c0-pins {
+ pinmux {
+ groups = "i2c";
+ function = "i2c";
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
new file mode 100644
index 0000000000..181cd1676c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc.yaml
@@ -0,0 +1,194 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/renesas,pfc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Pin Function Controller (GPIO and Pin Mux/Config)
+
+maintainers:
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+ The Pin Function Controller (PFC) is a Pin Mux/Config controller.
+ On SH/R-Mobile SoCs it also acts as a GPIO controller.
+
+properties:
+ compatible:
+ enum:
+ - renesas,pfc-emev2 # EMMA Mobile EV2
+ - renesas,pfc-r8a73a4 # R-Mobile APE6
+ - renesas,pfc-r8a7740 # R-Mobile A1
+ - renesas,pfc-r8a7742 # RZ/G1H
+ - renesas,pfc-r8a7743 # RZ/G1M
+ - renesas,pfc-r8a7744 # RZ/G1N
+ - renesas,pfc-r8a7745 # RZ/G1E
+ - renesas,pfc-r8a77470 # RZ/G1C
+ - renesas,pfc-r8a774a1 # RZ/G2M
+ - renesas,pfc-r8a774b1 # RZ/G2N
+ - renesas,pfc-r8a774c0 # RZ/G2E
+ - renesas,pfc-r8a774e1 # RZ/G2H
+ - renesas,pfc-r8a7778 # R-Car M1
+ - renesas,pfc-r8a7779 # R-Car H1
+ - renesas,pfc-r8a7790 # R-Car H2
+ - renesas,pfc-r8a7791 # R-Car M2-W
+ - renesas,pfc-r8a7792 # R-Car V2H
+ - renesas,pfc-r8a7793 # R-Car M2-N
+ - renesas,pfc-r8a7794 # R-Car E2
+ - renesas,pfc-r8a7795 # R-Car H3
+ - renesas,pfc-r8a7796 # R-Car M3-W
+ - renesas,pfc-r8a77961 # R-Car M3-W+
+ - renesas,pfc-r8a77965 # R-Car M3-N
+ - renesas,pfc-r8a77970 # R-Car V3M
+ - renesas,pfc-r8a77980 # R-Car V3H
+ - renesas,pfc-r8a77990 # R-Car E3
+ - renesas,pfc-r8a77995 # R-Car D3
+ - renesas,pfc-r8a779a0 # R-Car V3U
+ - renesas,pfc-r8a779f0 # R-Car S4-8
+ - renesas,pfc-r8a779g0 # R-Car V4H
+ - renesas,pfc-sh73a0 # SH-Mobile AG5
+
+ reg:
+ minItems: 1
+ maxItems: 10
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ gpio-ranges:
+ minItems: 1
+ maxItems: 16
+
+ interrupts-extended:
+ minItems: 32
+ maxItems: 64
+ description:
+ Specify the interrupts associated with external IRQ pins on SoCs where
+ the PFC acts as a GPIO controller. It must contain one interrupt per
+ external IRQ, sorted by external IRQ number.
+
+ power-domains:
+ maxItems: 1
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+
+if:
+ properties:
+ compatible:
+ enum:
+ - renesas,pfc-r8a73a4
+ - renesas,pfc-r8a7740
+ - renesas,pfc-sh73a0
+then:
+ required:
+ - interrupts-extended
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+ - power-domains
+
+additionalProperties:
+ anyOf:
+ - type: object
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+ description:
+ Pin controller client devices use pin configuration subnodes (children
+ and grandchildren) for desired pin configuration.
+ Client device subnodes use below standard properties.
+
+ properties:
+ function: true
+ groups: true
+ pins: true
+ bias-disable: true
+ bias-pull-down: true
+ bias-pull-up: true
+ drive-strength:
+ enum: [ 3, 6, 9, 12, 15, 18, 21, 24 ] # Superset of supported values
+ power-source:
+ enum: [ 1800, 3300 ]
+ gpio-hog: true
+ gpios: true
+ input: true
+ output-high: true
+ output-low: true
+
+ additionalProperties: false
+
+ - type: object
+ additionalProperties:
+ $ref: "#/additionalProperties/anyOf/0"
+
+examples:
+ - |
+ pfc: pinctrl@e6050000 {
+ compatible = "renesas,pfc-r8a7740";
+ reg = <0xe6050000 0x8000>,
+ <0xe605800c 0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pfc 0 0 212>;
+ interrupts-extended =
+ <&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>,
+ <&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>,
+ <&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>,
+ <&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>,
+ <&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>,
+ <&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>,
+ <&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>,
+ <&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>;
+ power-domains = <&pd_c5>;
+
+ lcd0-mux-hog {
+ /* DBGMD/LCDC0/FSIA MUX */
+ gpio-hog;
+ gpios = <176 0>;
+ output-high;
+ };
+ };
+
+ - |
+ pinctrl@e6060000 {
+ compatible = "renesas,pfc-r8a7795";
+ reg = <0xe6060000 0x50c>;
+
+ avb_pins: avb {
+ mux {
+ groups = "avb_link", "avb_mdio", "avb_mii";
+ function = "avb";
+ };
+
+ pins_mdio {
+ groups = "avb_mdio";
+ drive-strength = <24>;
+ };
+
+ pins_mii_tx {
+ pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC",
+ "PIN_AVB_TD0", "PIN_AVB_TD1", "PIN_AVB_TD2",
+ "PIN_AVB_TD3";
+ drive-strength = <12>;
+ };
+ };
+
+ keys_pins: keys {
+ pins = "GP_5_17", "GP_5_20", "GP_5_22", "GP_2_1";
+ bias-pull-up;
+ };
+
+ sdhi0_pins: sd0 {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <3300>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
new file mode 100644
index 0000000000..2bd7d47d0f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
@@ -0,0 +1,190 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/renesas,rza1-ports.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/A1 combined Pin and GPIO controller
+
+maintainers:
+ - Jacopo Mondi <jacopo+renesas@jmondi.org>
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+ The Renesas SoCs of the RZ/A1 family feature a combined Pin and GPIO
+ controller, named "Ports" in the hardware reference manual.
+ Pin multiplexing and GPIO configuration is performed on a per-pin basis
+ writing configuration values to per-port register sets.
+ Each "port" features up to 16 pins, each of them configurable for GPIO
+ function (port mode) or in alternate function mode.
+ Up to 8 different alternate function modes exist for each single pin.
+
+properties:
+ compatible:
+ oneOf:
+ - const: renesas,r7s72100-ports # RZ/A1H
+ - items:
+ - const: renesas,r7s72101-ports # RZ/A1M
+ - const: renesas,r7s72100-ports # fallback
+ - const: renesas,r7s72102-ports # RZ/A1L
+
+ reg:
+ maxItems: 1
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+
+patternProperties:
+ "^gpio-[0-9]*$":
+ type: object
+ additionalProperties: false
+
+ description:
+ Each port of the r7s72100 pin controller hardware is itself a GPIO
+ controller.
+ Different SoCs have different numbers of available pins per port, but
+ generally speaking, each of them can be configured in GPIO ("port") mode
+ on this hardware.
+ Describe GPIO controllers using sub-nodes with the following properties.
+
+ properties:
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ required:
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+
+
+additionalProperties:
+ anyOf:
+ - type: object
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+ description:
+ A pin multiplexing sub-node describes how to configure a set of (or a
+ single) pin in some desired alternate function mode.
+ A single sub-node may define several pin configurations.
+ A few alternate function require special pin configuration flags to be
+ supplied along with the alternate function configuration number.
+ The hardware reference manual specifies when a pin function requires
+ "software IO driven" mode to be specified. To do so use the generic
+ properties from the <include/linux/pinctrl/pinconf_generic.h> header
+ file to instruct the pin controller to perform the desired pin
+ configuration operation.
+ The hardware reference manual specifies when a pin has to be configured
+ to work in bi-directional mode and when the IO direction has to be
+ specified by software. Bi-directional pins must be managed by the pin
+ controller driver internally, while software driven IO direction has to
+ be explicitly selected when multiple options are available.
+
+ properties:
+ pinmux:
+ description: |
+ Integer array representing pin number and pin multiplexing
+ configuration.
+ When a pin has to be configured in alternate function mode, use
+ this property to identify the pin by its global index, and provide
+ its alternate function configuration number along with it.
+ When multiple pins are required to be configured as part of the
+ same alternate function they shall be specified as members of the
+ same argument list of a single "pinmux" property.
+ Helper macros to ease assembling the pin index from its position
+ (port where it sits on and pin number) and alternate function
+ identifier are provided by the pin controller header file at:
+ <include/dt-bindings/pinctrl/r7s72100-pinctrl.h>
+ Integers values in "pinmux" argument list are assembled as:
+ ((PORT * 16 + PIN) | MUX_FUNC << 16)
+
+ input-enable: true
+ output-enable: true
+
+ required:
+ - pinmux
+
+ additionalProperties: false
+
+ - type: object
+ additionalProperties:
+ $ref: "#/additionalProperties/anyOf/0"
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/r7s72100-pinctrl.h>
+ pinctrl: pinctrl@fcfe3000 {
+ compatible = "renesas,r7s72100-ports";
+
+ reg = <0xfcfe3000 0x4230>;
+
+ /*
+ * A GPIO controller node, controlling 16 pins indexed from 0.
+ * The GPIO controller base in the global pin indexing space is pin
+ * 48, thus pins [0 - 15] on this controller map to pins [48 - 63]
+ * in the global pin indexing space.
+ */
+ port3: gpio-3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ /*
+ * A serial communication interface with a TX output pin and an RX
+ * input pin.
+ * Pin #0 on port #3 is configured as alternate function #6.
+ * Pin #2 on port #3 is configured as alternate function #4.
+ */
+ scif2_pins: serial2 {
+ pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>;
+ };
+
+
+ /*
+ * I2c master: both SDA and SCL pins need bi-directional operations
+ * Pin #4 on port #1 is configured as alternate function #1.
+ * Pin #5 on port #1 is configured as alternate function #1.
+ * Both need to work in bi-directional mode, the driver must manage
+ * this internally.
+ */
+ i2c2_pins: i2c2 {
+ pinmux = <RZA1_PINMUX(1, 4, 1)>, <RZA1_PINMUX(1, 5, 1)>;
+ };
+
+
+ /*
+ * Multi-function timer input and output compare pins.
+ */
+ tioc0_pins: tioc0 {
+ /*
+ * Configure TIOC0A as software driven input
+ * Pin #0 on port #4 is configured as alternate function #2
+ * with IO direction specified by software as input.
+ */
+ tioc0_input_pins {
+ pinmux = <RZA1_PINMUX(4, 0, 2)>;
+ input-enable;
+ };
+
+ /*
+ * Configure TIOC0B as software driven output
+ * Pin #1 on port #4 is configured as alternate function #1
+ * with IO direction specified by software as output.
+ */
+ tioc0_output_pins {
+ pinmux = <RZA1_PINMUX(4, 1, 1)>;
+ output-enable;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml
new file mode 100644
index 0000000000..8271e7b2c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza2-pinctrl.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/renesas,rza2-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/A2 combined Pin and GPIO controller
+
+maintainers:
+ - Chris Brandt <chris.brandt@renesas.com>
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+ The Renesas SoCs of the RZ/A2 series feature a combined Pin and GPIO
+ controller.
+ Pin multiplexing and GPIO configuration is performed on a per-pin basis.
+ Each port features up to 8 pins, each of them configurable for GPIO function
+ (port mode) or in alternate function mode.
+ Up to 8 different alternate function modes exist for each single pin.
+
+properties:
+ compatible:
+ const: "renesas,r7s9210-pinctrl" # RZ/A2M
+
+ reg:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+ description:
+ The first cell contains the global GPIO port index, constructed using the
+ RZA2_PIN() helper macro in r7s9210-pinctrl.h.
+ E.g. "RZA2_PIN(PORT6, 0)" for P6_0.
+
+ gpio-ranges:
+ maxItems: 1
+
+additionalProperties:
+ type: object
+
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+ description:
+ The child nodes of the pin controller designate pins to be used for
+ specific peripheral functions or as GPIO.
+
+ A pin multiplexing sub-node describes how to configure a set of
+ (or a single) pin in some desired alternate function mode.
+ The values for the pinmux properties are a combination of port name,
+ pin number and the desired function index. Use the RZA2_PINMUX macro
+ located in include/dt-bindings/pinctrl/r7s9210-pinctrl.h to easily
+ define these.
+ For assigning GPIO pins, use the macro RZA2_PIN also in
+ to express the desired port pin.
+
+ properties:
+ pinmux:
+ description:
+ Values are constructed from GPIO port number, pin number, and
+ alternate function configuration number using the RZA2_PINMUX()
+ helper macro in r7s9210-pinctrl.h.
+
+ required:
+ - pinmux
+
+ additionalProperties: false
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/r7s9210-pinctrl.h>
+ pinctrl: pinctrl@fcffe000 {
+ compatible = "renesas,r7s9210-pinctrl";
+ reg = <0xfcffe000 0x1000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 0 176>;
+
+ /* Serial Console */
+ scif4_pins: serial4 {
+ pinmux = <RZA2_PINMUX(PORT9, 0, 4)>, /* TxD4 */
+ <RZA2_PINMUX(PORT9, 1, 4)>; /* RxD4 */
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
new file mode 100644
index 0000000000..145c5442f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
@@ -0,0 +1,180 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/renesas,rzg2l-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/{G2L,V2L} combined Pin and GPIO controller
+
+maintainers:
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+ - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
+
+description:
+ The Renesas SoCs of the RZ/{G2L,V2L} alike series feature a combined Pin and
+ GPIO controller.
+ Pin multiplexing and GPIO configuration is performed on a per-pin basis.
+ Each port features up to 8 pins, each of them configurable for GPIO function
+ (port mode) or in alternate function mode.
+ Up to 8 different alternate function modes exist for each single pin.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - renesas,r9a07g043-pinctrl # RZ/G2UL{Type-1,Type-2} and RZ/Five
+ - renesas,r9a07g044-pinctrl # RZ/G2{L,LC}
+
+ - items:
+ - enum:
+ - renesas,r9a07g054-pinctrl # RZ/V2L
+ - const: renesas,r9a07g044-pinctrl # RZ/G2{L,LC} fallback for RZ/V2L
+
+ reg:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+ description:
+ The first cell contains the global GPIO port index, constructed using the
+ RZG2L_GPIO() helper macro in <dt-bindings/pinctrl/rzg2l-pinctrl.h> and the
+ second cell represents consumer flag as mentioned in ../gpio/gpio.txt
+ E.g. "RZG2L_GPIO(39, 1)" for P39_1.
+
+ gpio-ranges:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+ description:
+ The first cell contains the global GPIO port index, constructed using the
+ RZG2L_GPIO() helper macro in <dt-bindings/pinctrl/rzg2l-pinctrl.h> and the
+ second cell is used to specify the flag.
+ E.g. "interrupts = <RZG2L_GPIO(43, 0) IRQ_TYPE_EDGE_FALLING>;" if P43_0 is
+ being used as an interrupt.
+
+ clocks:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ items:
+ - description: GPIO_RSTN signal
+ - description: GPIO_PORT_RESETN signal
+ - description: GPIO_SPARE_RESETN signal
+
+additionalProperties:
+ anyOf:
+ - type: object
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+ description:
+ Pin controller client devices use pin configuration subnodes (children
+ and grandchildren) for desired pin configuration.
+ Client device subnodes use below standard properties.
+
+ properties:
+ pinmux:
+ description:
+ Values are constructed from GPIO port number, pin number, and
+ alternate function configuration number using the RZG2L_PORT_PINMUX()
+ helper macro in <dt-bindings/pinctrl/rzg2l-pinctrl.h>.
+ pins: true
+ drive-strength:
+ enum: [ 2, 4, 8, 12 ]
+ output-impedance-ohms:
+ enum: [ 33, 50, 66, 100 ]
+ power-source:
+ description: I/O voltage in millivolt.
+ enum: [ 1800, 2500, 3300 ]
+ slew-rate: true
+ gpio-hog: true
+ gpios: true
+ input-enable: true
+ output-high: true
+ output-low: true
+ line-name: true
+
+ - type: object
+ additionalProperties:
+ $ref: "#/additionalProperties/anyOf/0"
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+ - interrupt-controller
+ - '#interrupt-cells'
+ - clocks
+ - power-domains
+ - resets
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+ #include <dt-bindings/clock/r9a07g044-cpg.h>
+
+ pinctrl: pinctrl@11030000 {
+ compatible = "renesas,r9a07g044-pinctrl";
+ reg = <0x11030000 0x10000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 0 392>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&cpg CPG_MOD R9A07G044_GPIO_HCLK>;
+ resets = <&cpg R9A07G044_GPIO_RSTN>,
+ <&cpg R9A07G044_GPIO_PORT_RESETN>,
+ <&cpg R9A07G044_GPIO_SPARE_RESETN>;
+ power-domains = <&cpg>;
+
+ scif0_pins: serial0 {
+ pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>, /* Tx */
+ <RZG2L_PORT_PINMUX(38, 1, 1)>; /* Rx */
+ };
+
+ i2c1_pins: i2c1 {
+ pins = "RIIC1_SDA", "RIIC1_SCL";
+ input-enable;
+ };
+
+ sd1-pwr-en-hog {
+ gpio-hog;
+ gpios = <RZG2L_GPIO(39, 2) 0>;
+ output-high;
+ line-name = "sd1_pwr_en";
+ };
+
+ sdhi1_pins: sd1 {
+ sd1_mux {
+ pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>, /* CD */
+ <RZG2L_PORT_PINMUX(19, 1, 1)>; /* WP */
+ power-source = <3300>;
+ };
+
+ sd1_data {
+ pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+ power-source = <3300>;
+ };
+
+ sd1_ctrl {
+ pins = "SD1_CLK", "SD1_CMD";
+ power-source = <3300>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-poeg.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-poeg.yaml
new file mode 100644
index 0000000000..ab2d456c93
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-poeg.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/renesas,rzg2l-poeg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L Port Output Enable for GPT (POEG)
+
+maintainers:
+ - Biju Das <biju.das.jz@bp.renesas.com>
+
+description: |
+ The output pins(GTIOCxA and GTIOCxB) of the general PWM timer (GPT) can be
+ disabled by using the port output enabling function for the GPT (POEG).
+ Specifically, either of the following ways can be used.
+ * Input level detection of the GTETRGA to GTETRGD pins.
+ * Output-disable request from the GPT.
+ * SSF bit setting(ie, by setting POEGGn.SSF to 1)
+
+ The state of the GTIOCxA and the GTIOCxB pins when the output is disabled,
+ are controlled by the GPT module.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,r9a07g044-poeg # RZ/G2{L,LC}
+ - renesas,r9a07g054-poeg # RZ/V2L
+ - const: renesas,rzg2l-poeg
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ renesas,gpt:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to gpt instance that serves the pwm operation.
+
+ renesas,poeg-id:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1, 2, 3 ]
+ description: |
+ POEG group index. Valid values are:
+ <0> : POEG group A
+ <1> : POEG group B
+ <2> : POEG group C
+ <3> : POEG group D
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - power-domains
+ - resets
+ - renesas,poeg-id
+ - renesas,gpt
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r9a07g044-cpg.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ poeggd: poeg@10049400 {
+ compatible = "renesas,r9a07g044-poeg", "renesas,rzg2l-poeg";
+ reg = <0x10049400 0x400>;
+ interrupts = <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A07G044_POEG_D_CLKP>;
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G044_POEG_D_RST>;
+ renesas,poeg-id = <3>;
+ renesas,gpt = <&gpt>;
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml
new file mode 100644
index 0000000000..816688580e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzn1-pinctrl.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/renesas,rzn1-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1 Pin Controller
+
+maintainers:
+ - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,r9a06g032-pinctrl # RZ/N1D
+ - renesas,r9a06g033-pinctrl # RZ/N1S
+ - const: renesas,rzn1-pinctrl # Generic RZ/N1
+
+ reg:
+ items:
+ - description: GPIO Multiplexing Level1 Register Block
+ - description: GPIO Multiplexing Level2 Register Block
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: bus
+ description:
+ The bus clock, sometimes described as pclk, for register accesses.
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+additionalProperties:
+ anyOf:
+ - type: object
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+ description:
+ A pin multiplexing sub-node describes how to configure a set of (or a
+ single) pin in some desired alternate function mode.
+ A single sub-node may define several pin configurations.
+
+ properties:
+ pinmux:
+ description: |
+ Integer array representing pin number and pin multiplexing
+ configuration.
+ When a pin has to be configured in alternate function mode, use
+ this property to identify the pin by its global index, and provide
+ its alternate function configuration number along with it.
+ When multiple pins are required to be configured as part of the
+ same alternate function they shall be specified as members of the
+ same argument list of a single "pinmux" property.
+ Integers values in the "pinmux" argument list are assembled as:
+ (PIN | MUX_FUNC << 8)
+ where PIN directly corresponds to the pl_gpio pin number and
+ MUX_FUNC is one of the alternate function identifiers defined in:
+ <include/dt-bindings/pinctrl/rzn1-pinctrl.h>
+ These identifiers collapse the IO Multiplex Configuration Level 1
+ and Level 2 numbers that are detailed in the hardware reference
+ manual into a single number. The identifiers for Level 2 are simply
+ offset by 10. Additional identifiers are provided to specify the
+ MDIO source peripheral.
+
+ bias-disable: true
+ bias-pull-up:
+ description: Pull up the pin with 50 kOhm
+ bias-pull-down:
+ description: Pull down the pin with 50 kOhm
+ bias-high-impedance: true
+ drive-strength:
+ enum: [ 4, 6, 8, 12 ]
+
+ required:
+ - pinmux
+
+ additionalProperties:
+ $ref: "#/additionalProperties/anyOf/0"
+
+ - type: object
+ additionalProperties:
+ $ref: "#/additionalProperties/anyOf/0"
+
+examples:
+ - |
+ #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+ #include <dt-bindings/pinctrl/rzn1-pinctrl.h>
+ pinctrl: pinctrl@40067000 {
+ compatible = "renesas,r9a06g032-pinctrl", "renesas,rzn1-pinctrl";
+ reg = <0x40067000 0x1000>, <0x51000000 0x480>;
+ clocks = <&sysctrl R9A06G032_HCLK_PINCONFIG>;
+ clock-names = "bus";
+
+ /*
+ * A serial communication interface with a TX output pin and an RX
+ * input pin.
+ */
+ pins_uart0: pins_uart0 {
+ pinmux = <
+ RZN1_PINMUX(103, RZN1_FUNC_UART0_I) /* UART0_TXD */
+ RZN1_PINMUX(104, RZN1_FUNC_UART0_I) /* UART0_RXD */
+ >;
+ };
+
+ /*
+ * Set the pull-up on the RXD pin of the UART.
+ */
+ pins_uart0_alt: pins_uart0_alt {
+ pinmux = <RZN1_PINMUX(103, RZN1_FUNC_UART0_I)>;
+
+ pins_uart6_rx {
+ pinmux = <RZN1_PINMUX(104, RZN1_FUNC_UART0_I)>;
+ bias-pull-up;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml
new file mode 100644
index 0000000000..cb81a17bd0
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/renesas,rzv2m-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/V2M combined Pin and GPIO controller
+
+maintainers:
+ - Fabrizio Castro <fabrizio.castro.jz@renesas.com>
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description:
+ The Renesas RZ/V2M SoC features a combined Pin and GPIO controller.
+ Pin multiplexing and GPIO configuration is performed on a per-pin basis.
+ Each port features up to 16 pins, each of them configurable for GPIO function
+ (port mode) or in alternate function mode.
+ Up to 8 different alternate function modes exist for each single pin.
+
+properties:
+ compatible:
+ const: renesas,r9a09g011-pinctrl # RZ/V2M
+
+ reg:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+ description:
+ The first cell contains the global GPIO port index, constructed using the
+ RZV2M_GPIO() helper macro in <dt-bindings/pinctrl/rzv2m-pinctrl.h> and the
+ second cell represents consumer flag as mentioned in ../gpio/gpio.txt
+ E.g. "RZV2M_GPIO(8, 1)" for P8_1.
+
+ gpio-ranges:
+ maxItems: 1
+
+ interrupts:
+ description: INEXINT[0..38] corresponding to individual pin inputs.
+ maxItems: 39
+
+ clocks:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+additionalProperties:
+ anyOf:
+ - type: object
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+ description:
+ Pin controller client devices use pin configuration subnodes (children
+ and grandchildren) for desired pin configuration.
+ Client device subnodes use below standard properties.
+
+ properties:
+ pinmux:
+ description:
+ Values are constructed from GPIO port number, pin number, and
+ alternate function configuration number using the RZV2M_PORT_PINMUX()
+ helper macro in <dt-bindings/pinctrl/rzv2m-pinctrl.h>.
+ pins: true
+ bias-disable: true
+ bias-pull-down: true
+ bias-pull-up: true
+ drive-strength-microamp:
+ # Superset of supported values
+ enum: [ 1600, 1800, 2000, 3200, 3800, 4000, 6400, 7800, 8000,
+ 9000, 9600, 11000, 12000, 13000, 18000 ]
+ slew-rate:
+ description: 0 is slow slew rate, 1 is fast slew rate
+ enum: [ 0, 1 ]
+ gpio-hog: true
+ gpios: true
+ output-high: true
+ output-low: true
+ line-name: true
+
+ - type: object
+ additionalProperties:
+ $ref: "#/additionalProperties/anyOf/0"
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+ - interrupts
+ - clocks
+ - power-domains
+ - resets
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/rzv2m-pinctrl.h>
+ #include <dt-bindings/clock/r9a09g011-cpg.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ pinctrl: pinctrl@b6250000 {
+ compatible = "renesas,r9a09g011-pinctrl";
+ reg = <0xb6250000 0x800>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 0 352>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD R9A09G011_PFC_PCLK>;
+ resets = <&cpg R9A09G011_PFC_PRESETN>;
+ power-domains = <&cpg>;
+
+ i2c2_pins: i2c2 {
+ pinmux = <RZV2M_PORT_PINMUX(3, 8, 2)>, /* SDA */
+ <RZV2M_PORT_PINMUX(3, 9, 2)>; /* SCL */
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
new file mode 100644
index 0000000000..10c335efe6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
@@ -0,0 +1,188 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/rockchip,pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Pinmux Controller
+
+maintainers:
+ - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+ The Rockchip Pinmux Controller enables the IC to share one PAD
+ to several functional blocks. The sharing is done by multiplexing
+ the PAD input/output signals. For each PAD there are several muxing
+ options with option 0 being used as a GPIO.
+
+ Please refer to pinctrl-bindings.txt in this directory for details of the
+ common pinctrl bindings used by client devices, including the meaning of the
+ phrase "pin configuration node".
+
+ The Rockchip pin configuration node is a node of a group of pins which can be
+ used for a specific device or function. This node represents both mux and
+ config of the pins in that group. The 'pins' selects the function mode
+ (also named pin mode) this pin can work on and the 'config' configures
+ various pad settings such as pull-up, etc.
+
+ The pins are grouped into up to 9 individual pin banks which need to be
+ defined as gpio sub-nodes of the pinmux controller.
+
+properties:
+ compatible:
+ enum:
+ - rockchip,px30-pinctrl
+ - rockchip,rk2928-pinctrl
+ - rockchip,rk3036-pinctrl
+ - rockchip,rk3066a-pinctrl
+ - rockchip,rk3066b-pinctrl
+ - rockchip,rk3128-pinctrl
+ - rockchip,rk3188-pinctrl
+ - rockchip,rk3228-pinctrl
+ - rockchip,rk3288-pinctrl
+ - rockchip,rk3308-pinctrl
+ - rockchip,rk3328-pinctrl
+ - rockchip,rk3368-pinctrl
+ - rockchip,rk3399-pinctrl
+ - rockchip,rk3568-pinctrl
+ - rockchip,rk3588-pinctrl
+ - rockchip,rv1108-pinctrl
+ - rockchip,rv1126-pinctrl
+
+ rockchip,grf:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ The phandle of the syscon node for the GRF registers.
+
+ rockchip,pmu:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ The phandle of the syscon node for the PMU registers,
+ as some SoCs carry parts of the iomux controller registers there.
+ Required for at least rk3188 and rk3288. On the rk3368 this should
+ point to the PMUGRF syscon.
+
+ "#address-cells":
+ enum: [1, 2]
+
+ "#size-cells":
+ enum: [1, 2]
+
+ ranges: true
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - rockchip,grf
+
+patternProperties:
+ "gpio@[0-9a-f]+$":
+ type: object
+
+ $ref: /schemas/gpio/rockchip,gpio-bank.yaml#
+ deprecated: true
+
+ unevaluatedProperties: false
+
+ "pcfg-[a-z0-9-]+$":
+ type: object
+ properties:
+ bias-disable: true
+
+ bias-pull-down: true
+
+ bias-pull-pin-default: true
+
+ bias-pull-up: true
+
+ drive-strength:
+ minimum: 0
+ maximum: 20
+
+ input-enable: true
+
+ input-schmitt-enable: true
+
+ output-high: true
+
+ output-low: true
+
+ additionalProperties: false
+
+additionalProperties:
+ type: object
+ additionalProperties:
+ type: object
+ properties:
+ rockchip,pins:
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ minItems: 1
+ items:
+ items:
+ - minimum: 0
+ maximum: 8
+ description:
+ Pin bank.
+ - minimum: 0
+ maximum: 31
+ description:
+ Pin bank index.
+ - minimum: 0
+ maximum: 13
+ description:
+ Mux 0 means GPIO and mux 1 to N means
+ the specific device function.
+ - description:
+ The phandle of a node contains the generic pinconfig options
+ to use as described in pinctrl-bindings.txt.
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/pinctrl/rockchip.h>
+
+ pinctrl: pinctrl {
+ compatible = "rockchip,rk3066a-pinctrl";
+ rockchip,grf = <&grf>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio0: gpio@20034000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x20034000 0x100>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_gates8 9>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pcfg_pull_default: pcfg-pull-default {
+ bias-pull-pin-default;
+ };
+
+ uart2 {
+ uart2_xfer: uart2-xfer {
+ rockchip,pins = <1 RK_PB0 1 &pcfg_pull_default>,
+ <1 RK_PB1 1 &pcfg_pull_default>;
+ };
+ };
+ };
+
+ uart2: serial@20064000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x20064000 0x400>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mux_uart2>;
+ pinctrl-0 = <&uart2_xfer>;
+ pinctrl-names = "default";
+ reg-io-width = <1>;
+ reg-shift = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml
new file mode 100644
index 0000000000..8cf3c47ab8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-gpio-bank.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl-gpio-bank.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC pin controller - gpio bank
+
+maintainers:
+ - Krzysztof Kozlowski <krzk@kernel.org>
+ - Sylwester Nawrocki <s.nawrocki@samsung.com>
+ - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+ This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
+ controller.
+
+ GPIO bank description for Samsung S3C/S5P/Exynos SoC pin controller.
+
+ See also Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml for
+ additional information and example.
+
+properties:
+ '#gpio-cells':
+ const: 2
+
+ gpio-controller: true
+
+ '#interrupt-cells':
+ description:
+ For GPIO banks supporting external GPIO interrupts or external wake-up
+ interrupts.
+ const: 2
+
+ interrupt-controller:
+ description:
+ For GPIO banks supporting external GPIO interrupts or external wake-up
+ interrupts.
+
+ interrupts:
+ description:
+ For GPIO banks supporting direct external wake-up interrupts (without
+ multiplexing). Number of interrupts must match number of wake-up capable
+ pins of this bank.
+ minItems: 1
+ maxItems: 8
+
+required:
+ - '#gpio-cells'
+ - gpio-controller
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml
new file mode 100644
index 0000000000..f796f27bf0
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-pins-cfg.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl-pins-cfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC pin controller - pins configuration
+
+maintainers:
+ - Krzysztof Kozlowski <krzk@kernel.org>
+ - Sylwester Nawrocki <s.nawrocki@samsung.com>
+ - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+ This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
+ controller.
+
+ Pins configuration for Samsung S3C/S5P/Exynos SoC pin controller.
+
+ The values used for config properties should be derived from the hardware
+ manual and these values are programmed as-is into the pin pull up/down and
+ driver strength register of the pin-controller.
+
+ See also Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml for
+ additional information and example.
+
+properties:
+ samsung,pins:
+ description: |
+ List of pins to configure. For initial and sleep states, the maximum
+ number is one pin. In other cases there is no upper limit.
+
+ The pins should use lowercase names matching hardware manual, e.g. for
+ GPA0 bank: gpa0-0, gpa0-1, gpa0-2.
+ $ref: /schemas/types.yaml#/definitions/string-array
+
+ samsung,pin-function:
+ description: |
+ The pin function selection that should be applied on the pins listed in the
+ child node is specified using the "samsung,pin-function" property. The value
+ of this property that should be applied to each of the pins listed in the
+ "samsung,pins" property should be picked from the hardware manual of the SoC
+ for the specified pin group. This property is optional in the child node if
+ no specific function selection is desired for the pins listed in the child
+ node. The value of this property is used as-is to program the pin-controller
+ function selector register of the pin-bank.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+
+ samsung,pin-drv:
+ description: Drive strength configuration.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 15
+
+ samsung,pin-pud:
+ description: Pull up/down configuration.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+
+ samsung,pin-val:
+ description: Initial value of pin output buffer.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
+ samsung,pin-con-pdn:
+ description: Function in power down mode.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+
+ samsung,pin-pud-pdn:
+ description: Pull up/down configuration in power down mode.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+
+required:
+ - samsung,pins
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
new file mode 100644
index 0000000000..1de91a5123
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl-wakeup-interrupt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC pin controller - wake-up interrupt controller
+
+maintainers:
+ - Krzysztof Kozlowski <krzk@kernel.org>
+ - Sylwester Nawrocki <s.nawrocki@samsung.com>
+ - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+ This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
+ controller.
+
+ External wake-up interrupts for Samsung S3C/S5P/Exynos SoC pin controller.
+ For S3C24xx, S3C64xx, S5PV210 and Exynos4210 compatible wake-up interrupt
+ controllers, only one pin-controller device node can include external wake-up
+ interrupts child node (in other words, only one External wake-up interrupts
+ pin-controller is supported).
+ For newer controllers, multiple pin-controller device node can include
+ external wake-up interrupts child node.
+
+ See also Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml for
+ additional information and example.
+
+properties:
+ compatible:
+ enum:
+ - samsung,s3c2410-wakeup-eint
+ - samsung,s3c2412-wakeup-eint
+ - samsung,s3c64xx-wakeup-eint
+ - samsung,s5pv210-wakeup-eint
+ - samsung,exynos4210-wakeup-eint
+ - samsung,exynos7-wakeup-eint
+ - samsung,exynos850-wakeup-eint
+ - samsung,exynosautov9-wakeup-eint
+
+ interrupts:
+ description:
+ Interrupt used by multiplexed external wake-up interrupts.
+ minItems: 1
+ maxItems: 6
+
+required:
+ - compatible
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - samsung,s3c2410-wakeup-eint
+ - samsung,s3c2412-wakeup-eint
+ then:
+ properties:
+ interrupts:
+ minItems: 6
+ maxItems: 6
+ required:
+ - interrupts
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,s3c64xx-wakeup-eint
+ then:
+ properties:
+ interrupts:
+ minItems: 4
+ maxItems: 4
+ required:
+ - interrupts
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - samsung,s5pv210-wakeup-eint
+ - samsung,exynos4210-wakeup-eint
+ - samsung,exynos7-wakeup-eint
+ then:
+ properties:
+ interrupts:
+ minItems: 1
+ maxItems: 1
+ required:
+ - interrupts
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - samsung,exynos850-wakeup-eint
+ - samsung,exynosautov9-wakeup-eint
+ then:
+ properties:
+ interrupts: false
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml
new file mode 100644
index 0000000000..2661462177
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/samsung,pinctrl.yaml
@@ -0,0 +1,387 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/samsung,pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C/S5P/Exynos SoC pin controller
+
+maintainers:
+ - Krzysztof Kozlowski <krzk@kernel.org>
+ - Sylwester Nawrocki <s.nawrocki@samsung.com>
+ - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+ This is a part of device tree bindings for Samsung S3C/S5P/Exynos SoC pin
+ controller.
+
+ All the pin controller nodes should be represented in the aliases node using
+ the following format 'pinctrl{n}' where n is a unique number for the alias.
+
+ The controller supports three types of interrupts::
+ - External GPIO interrupts (see interrupts property in pin controller node);
+
+ - External wake-up interrupts - multiplexed (capable of waking up the system
+ see interrupts property in external wake-up interrupt controller node -
+ samsung,pinctrl-wakeup-interrupt.yaml);
+
+ - External wake-up interrupts - direct (capable of waking up the system, see
+ interrupts property in every bank of pin controller with external wake-up
+ interrupt controller - samsung,pinctrl-gpio-bank.yaml).
+
+properties:
+ $nodename:
+ pattern: "^pinctrl(@.*)?"
+
+ compatible:
+ enum:
+ - samsung,s3c2412-pinctrl
+ - samsung,s3c2416-pinctrl
+ - samsung,s3c2440-pinctrl
+ - samsung,s3c2450-pinctrl
+ - samsung,s3c64xx-pinctrl
+ - samsung,s5pv210-pinctrl
+ - samsung,exynos3250-pinctrl
+ - samsung,exynos4210-pinctrl
+ - samsung,exynos4x12-pinctrl
+ - samsung,exynos5250-pinctrl
+ - samsung,exynos5260-pinctrl
+ - samsung,exynos5410-pinctrl
+ - samsung,exynos5420-pinctrl
+ - samsung,exynos5433-pinctrl
+ - samsung,exynos7-pinctrl
+ - samsung,exynos7885-pinctrl
+ - samsung,exynos850-pinctrl
+ - samsung,exynosautov9-pinctrl
+ - tesla,fsd-pinctrl
+
+ interrupts:
+ description:
+ Required for GPIO banks supporting external GPIO interrupts.
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ reg:
+ description:
+ Second base address of the pin controller if the specific registers of
+ the pin controller are separated into the different base address.
+ Only certain banks of certain pin controller might need it.
+ minItems: 1
+ maxItems: 2
+
+ wakeup-interrupt-controller:
+ $ref: samsung,pinctrl-wakeup-interrupt.yaml
+
+patternProperties:
+ "^[a-z]+[0-9]*-gpio-bank$":
+ description:
+ Pin banks of the controller are represented by child nodes of the
+ controller node. Bank name is taken from name of the node.
+ $ref: samsung,pinctrl-gpio-bank.yaml
+
+ "^[a-z0-9-]+-pins$":
+ oneOf:
+ - $ref: samsung,pinctrl-pins-cfg.yaml
+ required:
+ - samsung,pins
+ - type: object
+ patternProperties:
+ "^[a-z0-9-]+-pins$":
+ $ref: samsung,pinctrl-pins-cfg.yaml
+
+ additionalProperties: false
+
+ "^(initial|sleep)-state$":
+ type: object
+ additionalProperties: false
+
+ patternProperties:
+ "^(pin-[a-z0-9-]+|[a-z0-9-]+-pin)$":
+ $ref: samsung,pinctrl-pins-cfg.yaml
+
+ properties:
+ samsung,pins:
+ description: See samsung,pinctrl-pins-cfg.yaml
+ $ref: /schemas/types.yaml#/definitions/string-array
+ maxItems: 1
+
+ required:
+ - samsung,pins
+
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: pinctrl.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,exynos5433-pinctrl
+ then:
+ properties:
+ reg:
+ minItems: 1
+ maxItems: 2
+ else:
+ properties:
+ reg:
+ minItems: 1
+ maxItems: 1
+
+additionalProperties: false
+
+examples:
+ - |
+ pinctrl@7f008000 {
+ compatible = "samsung,s3c64xx-pinctrl";
+ reg = <0x7f008000 0x1000>;
+ interrupt-parent = <&vic1>;
+ interrupts = <21>;
+
+ wakeup-interrupt-controller {
+ compatible = "samsung,s3c64xx-wakeup-eint";
+ interrupts-extended = <&vic0 0>,
+ <&vic0 1>,
+ <&vic1 0>,
+ <&vic1 1>;
+ };
+
+ /* Pin bank with external GPIO or muxed external wake-up interrupts */
+ gpa-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ // ...
+
+ uart0-data-pins {
+ samsung,pins = "gpa-0", "gpa-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ };
+
+ // ...
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ pinctrl@11400000 {
+ compatible = "samsung,exynos4210-pinctrl";
+ reg = <0x11400000 0x1000>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sleep0>;
+
+ /* Pin bank with external GPIO or muxed external wake-up interrupts */
+ gpa0-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ // ...
+
+ uart0-data-pins {
+ samsung,pins = "gpa0-0", "gpa0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ // ...
+
+ sleep0: sleep-state {
+ gpa0-0-pin {
+ samsung,pins = "gpa0-0";
+ samsung,pin-con-pdn = <2>;
+ samsung,pin-pud-pdn = <0>;
+ };
+
+ gpa0-1-pin {
+ samsung,pins = "gpa0-1";
+ samsung,pin-con-pdn = <0>;
+ samsung,pin-pud-pdn = <0>;
+ };
+
+ // ...
+ };
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ pinctrl@11000000 {
+ compatible = "samsung,exynos4210-pinctrl";
+ reg = <0x11000000 0x1000>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+
+ wakeup-interrupt-controller {
+ compatible = "samsung,exynos4210-wakeup-eint";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ /* Pin bank with external GPIO or muxed external wake-up interrupts */
+ gpj0-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ /* Pin bank without external interrupts */
+ gpy0-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ /* Pin bank with external direct wake-up interrupts */
+ gpx0-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ };
+
+ // ...
+
+ sd0-clk-pins {
+ samsung,pins = "gpk0-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd4-bus-width8-pins {
+ part-1-pins {
+ samsung,pins = "gpk0-3", "gpk0-4",
+ "gpk0-5", "gpk0-6";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ part-2-pins {
+ samsung,pins = "gpk1-3", "gpk1-4",
+ "gpk1-5", "gpk1-6";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+ };
+
+ // ...
+
+ otg-gp-pins {
+ samsung,pins = "gpx3-3";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ samsung,pin-val = <0>;
+ };
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ pinctrl@10580000 {
+ compatible = "samsung,exynos5433-pinctrl";
+ reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&initial_alive>;
+
+ wakeup-interrupt-controller {
+ compatible = "samsung,exynos7-wakeup-eint";
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ /* Pin bank with external direct wake-up interrupts */
+ gpa0-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ };
+
+ // ...
+
+ te-irq-pins {
+ samsung,pins = "gpf1-3";
+ samsung,pin-function = <0xf>;
+ };
+
+ // ..
+
+ initial_alive: initial-state {
+ gpa0-0-pin {
+ samsung,pins = "gpa0-0";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+
+ // ...
+ };
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ pinctrl@114b0000 {
+ compatible = "samsung,exynos5433-pinctrl";
+ reg = <0x114b0000 0x1000>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd_aud>;
+
+ /* Pin bank with external GPIO or muxed external wake-up interrupts */
+ gpz0-gpio-bank {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ // ...
+
+ i2s0-bus-pins {
+ samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3",
+ "gpz0-4", "gpz0-5", "gpz0-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ // ...
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml b/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml
new file mode 100644
index 0000000000..4214d7311f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/semtech,sx1501q.yaml
@@ -0,0 +1,208 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2022 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/semtech,sx1501q.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Semtech SX150x GPIO expander
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+properties:
+ compatible:
+ enum:
+ - semtech,sx1501q
+ - semtech,sx1502q
+ - semtech,sx1503q
+ - semtech,sx1504q
+ - semtech,sx1505q
+ - semtech,sx1506q
+ - semtech,sx1507q
+ - semtech,sx1508q
+ - semtech,sx1509q
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ '#interrupt-cells':
+ const: 2
+
+ interrupt-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ gpio-controller: true
+
+ semtech,probe-reset:
+ description: Will trigger a reset of the GPIO expander on probe
+ type: boolean
+
+patternProperties:
+ '-cfg$':
+ type: object
+ properties:
+ pins: true
+
+ bias-disable: true
+ bias-pull-up: true
+ bias-pull-down: true
+ bias-pull-pin-default: true
+ drive-push-pull: true
+ output-low: true
+ output-high: true
+ drive-open-drain: true
+
+ required:
+ - pins
+
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+ - if:
+ properties:
+ pins:
+ contains:
+ const: oscio
+ then:
+ properties:
+ bias-disable: false
+ bias-pull-up: false
+ bias-pull-down: false
+ bias-pull-pin-default: false
+ drive-open-drain: false
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - '#gpio-cells'
+ - gpio-controller
+
+allOf:
+ - $ref: pinctrl.yaml#
+ - if:
+ not:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - semtech,sx1507q
+ - semtech,sx1508q
+ - semtech,sx1509q
+ then:
+ properties:
+ semtech,probe-reset: false
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - semtech,sx1501q
+ - semtech,sx1504q
+ then:
+ patternProperties:
+ '-cfg$':
+ properties:
+ pins:
+ items:
+ pattern: '^gpio[0-3]$'
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - semtech,sx1502q
+ - semtech,sx1505q
+ then:
+ patternProperties:
+ '-cfg$':
+ properties:
+ pins:
+ items:
+ pattern: '^gpio[0-7]$'
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - semtech,sx1503q
+ - semtech,sx1506q
+ then:
+ patternProperties:
+ '-cfg$':
+ properties:
+ pins:
+ items:
+ pattern: '^(gpio[0-9]|gpio1[0-5])$'
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: semtech,sx1507q
+ then:
+ patternProperties:
+ '-cfg$':
+ properties:
+ pins:
+ items:
+ pattern: '^(oscio|gpio[0-3])$'
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: semtech,sx1508q
+ then:
+ patternProperties:
+ '-cfg$':
+ properties:
+ pins:
+ items:
+ pattern: '^(oscio|gpio[0-7])$'
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: semtech,sx1509q
+ then:
+ patternProperties:
+ '-cfg$':
+ properties:
+ pins:
+ items:
+ pattern: '^(oscio|gpio[0-9]|gpio1[0-5])$'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c@1000 {
+ reg = <0x1000 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl@20 {
+ compatible = "semtech,sx1501q";
+ reg = <0x20>;
+
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+
+ interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+
+ gpio-controller;
+ interrupt-controller;
+
+ gpio1-cfg {
+ pins = "gpio1";
+ bias-pull-up;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
new file mode 100644
index 0000000000..880da721a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/socionext,uniphier-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier SoCs pin controller
+
+maintainers:
+ - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+ compatible:
+ enum:
+ - socionext,uniphier-ld4-pinctrl
+ - socionext,uniphier-pro4-pinctrl
+ - socionext,uniphier-sld8-pinctrl
+ - socionext,uniphier-pro5-pinctrl
+ - socionext,uniphier-pxs2-pinctrl
+ - socionext,uniphier-ld6b-pinctrl
+ - socionext,uniphier-ld11-pinctrl
+ - socionext,uniphier-ld20-pinctrl
+ - socionext,uniphier-pxs3-pinctrl
+ - socionext,uniphier-nx1-pinctrl
+
+additionalProperties:
+ type: object
+
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+ properties:
+ function: true
+ groups: true
+ pins: true
+ bias-pull-up: true
+ bias-pull-down: true
+ bias-pull-pin-default: true
+ drive-strength: true
+
+ additionalProperties:
+ type: object
+
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+ properties:
+ function: true
+ groups: true
+ pins: true
+ bias-pull-up: true
+ bias-pull-down: true
+ bias-pull-pin-default: true
+ drive-strength: true
+
+ unevaluatedProperties: false
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+
+examples:
+ - |
+ // The UniPhier pinctrl should be a subnode of a "syscon" compatible node.
+
+ pinctrl {
+ compatible = "socionext,uniphier-ld20-pinctrl";
+
+ pinctrl_ether_rgmii: ether-rgmii {
+ groups = "ether_rgmii";
+ function = "ether_rgmii";
+
+ tx {
+ pins = "RGMII_TXCLK", "RGMII_TXD0", "RGMII_TXD1",
+ "RGMII_TXD2", "RGMII_TXD3", "RGMII_TXCTL";
+ drive-strength = <9>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/sprd,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/sprd,pinctrl.txt
new file mode 100644
index 0000000000..779b8ef0f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/sprd,pinctrl.txt
@@ -0,0 +1,83 @@
+* Spreadtrum Pin Controller
+
+The Spreadtrum pin controller are organized in 3 blocks (types).
+
+The first block comprises some global control registers, and each
+register contains several bit fields with one bit or several bits
+to configure for some global common configuration, such as domain
+pad driving level, system control select and so on ("domain pad
+driving level": One pin can output 3.0v or 1.8v, depending on the
+related domain pad driving selection, if the related domain pad
+select 3.0v, then the pin can output 3.0v. "system control" is used
+to choose one function (like: UART0) for which system, since we
+have several systems (AP/CP/CM4) on one SoC.).
+
+There are too much various configuration that we can not list all
+of them, so we can not make every Spreadtrum-special configuration
+as one generic configuration, and maybe it will add more strange
+global configuration in future. Then we add one "sprd,control" to
+set these various global control configuration, and we need use
+magic number for this property.
+
+Moreover we recognise every fields comprising one bit or several
+bits in one global control register as one pin, thus we should
+record every pin's bit offset, bit width and register offset to
+configure this field (pin).
+
+The second block comprises some common registers which have unified
+register definition, and each register described one pin is used
+to configure the pin sleep mode, function select and sleep related
+configuration.
+
+Now we have 4 systems for sleep mode on SC9860 SoC: AP system,
+PUBCP system, TGLDSP system and AGDSP system. And the pin sleep
+related configuration are:
+- input-enable
+- input-disable
+- output-high
+- output-low
+- bias-pull-up
+- bias-pull-down
+
+In some situation we need set the pin sleep mode and pin sleep related
+configuration, to set the pin sleep related configuration automatically
+by hardware when the system specified by sleep mode goes into deep
+sleep mode. For example, if we set the pin sleep mode as PUBCP_SLEEP
+and set the pin sleep related configuration as "input-enable", which
+means when PUBCP system goes into deep sleep mode, this pin will be set
+input enable automatically.
+
+Moreover we can not use the "sleep" state, since some systems (like:
+PUBCP system) do not run linux kernel OS (only AP system run linux
+kernel on SC9860 platform), then we can not select "sleep" state
+when the PUBCP system goes into deep sleep mode. Thus we introduce
+"sprd,sleep-mode" property to set pin sleep mode.
+
+The last block comprises some misc registers which also have unified
+register definition, and each register described one pin is used to
+configure drive strength, pull up/down and so on. Especially for pull
+up, we have two kind pull up resistor: 20K and 4.7K.
+
+Required properties for Spreadtrum pin controller:
+- compatible: "sprd,<soc>-pinctrl"
+ Please refer to each sprd,<soc>-pinctrl.txt binding doc for supported SoCs.
+- reg: The register address of pin controller device.
+- pins : An array of pin names.
+
+Optional properties:
+- function: Specified the function name.
+- drive-strength: Drive strength in mA.
+- input-schmitt-disable: Enable schmitt-trigger mode.
+- input-schmitt-enable: Disable schmitt-trigger mode.
+- bias-disable: Disable pin bias.
+- bias-pull-down: Pull down on pin.
+- bias-pull-up: Pull up on pin.
+- input-enable: Enable pin input.
+- input-disable: Enable pin output.
+- output-high: Set the pin as an output level high.
+- output-low: Set the pin as an output level low.
+- sleep-hardware-state: Indicate these configs in this state are sleep related.
+- sprd,control: Control values referring to databook for global control pins.
+- sprd,sleep-mode: Sleep mode selection.
+
+Please refer to each sprd,<soc>-pinctrl.txt binding doc for supported values.
diff --git a/Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.txt
new file mode 100644
index 0000000000..5a628333d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.txt
@@ -0,0 +1,70 @@
+* Spreadtrum SC9860 Pin Controller
+
+Please refer to sprd,pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: Must be "sprd,sc9860-pinctrl".
+- reg: The register address of pin controller device.
+- pins : An array of strings, each string containing the name of a pin.
+
+Optional properties:
+- function: A string containing the name of the function, values must be
+ one of: "func1", "func2", "func3" and "func4".
+- drive-strength: Drive strength in mA. Supported values: 2, 4, 6, 8, 10,
+ 12, 14, 16, 20, 21, 24, 25, 27, 29, 31 and 33.
+- input-schmitt-disable: Enable schmitt-trigger mode.
+- input-schmitt-enable: Disable schmitt-trigger mode.
+- bias-disable: Disable pin bias.
+- bias-pull-down: Pull down on pin.
+- bias-pull-up: Pull up on pin. Supported values: 20000 for pull-up resistor
+ is 20K and 4700 for pull-up resistor is 4.7K.
+- input-enable: Enable pin input.
+- input-disable: Enable pin output.
+- output-high: Set the pin as an output level high.
+- output-low: Set the pin as an output level low.
+- sleep-hardware-state: Indicate these configs in this state are sleep related.
+- sprd,control: Control values referring to databook for global control pins.
+- sprd,sleep-mode: Choose the pin sleep mode, and supported values are:
+ AP_SLEEP, PUBCP_SLEEP, TGLDSP_SLEEP and AGDSP_SLEEP.
+
+Pin sleep mode definition:
+enum pin_sleep_mode {
+ AP_SLEEP = BIT(0),
+ PUBCP_SLEEP = BIT(1),
+ TGLDSP_SLEEP = BIT(2),
+ AGDSP_SLEEP = BIT(3),
+};
+
+Example:
+pin_controller: pinctrl@402a0000 {
+ compatible = "sprd,sc9860-pinctrl";
+ reg = <0x402a0000 0x10000>;
+
+ grp1: sd0 {
+ pins = "SC9860_VIO_SD2_IRTE", "SC9860_VIO_SD0_IRTE";
+ sprd,control = <0x1>;
+ };
+
+ grp2: rfctl_33 {
+ pins = "SC9860_RFCTL33";
+ function = "func2";
+ sprd,sleep-mode = <AP_SLEEP | PUBCP_SLEEP>;
+ grp2_sleep_mode: rfctl_33_sleep {
+ pins = "SC9860_RFCTL33";
+ sleep-hardware-state;
+ output-low;
+ }
+ };
+
+ grp3: rfctl_misc_20 {
+ pins = "SC9860_RFCTL20_MISC";
+ drive-strength = <10>;
+ bias-pull-up = <4700>;
+ grp3_sleep_mode: rfctl_misc_sleep {
+ pins = "SC9860_RFCTL20_MISC";
+ sleep-hardware-state;
+ bias-pull-up;
+ }
+ };
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
new file mode 100644
index 0000000000..2120ef71a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
@@ -0,0 +1,288 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) STMicroelectronics 2019.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/st,stm32-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32 GPIO and Pin Mux/Config controller
+
+maintainers:
+ - Alexandre TORGUE <alexandre.torgue@foss.st.com>
+
+description: |
+ STMicroelectronics's STM32 MCUs intregrate a GPIO and Pin mux/config hardware
+ controller. It controls the input/output settings on the available pins and
+ also provides ability to multiplex and configure the output of various
+ on-chip controllers onto these pads.
+
+properties:
+ compatible:
+ enum:
+ - st,stm32f429-pinctrl
+ - st,stm32f469-pinctrl
+ - st,stm32f746-pinctrl
+ - st,stm32f769-pinctrl
+ - st,stm32h743-pinctrl
+ - st,stm32mp135-pinctrl
+ - st,stm32mp157-pinctrl
+ - st,stm32mp157-z-pinctrl
+ - st,stm32mp257-pinctrl
+ - st,stm32mp257-z-pinctrl
+
+ '#address-cells':
+ const: 1
+ '#size-cells':
+ const: 1
+
+ ranges: true
+ pins-are-numbered:
+ $ref: /schemas/types.yaml#/definitions/flag
+ deprecated: true
+ hwlocks: true
+
+ interrupts:
+ maxItems: 1
+
+ st,syscfg:
+ description: Phandle+args to the syscon node which includes IRQ mux selection.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: syscon node which includes IRQ mux selection
+ - description: The offset of the IRQ mux selection register
+ - description: The field mask of IRQ mux, needed if different of 0xf
+
+ st,package:
+ description:
+ Indicates the SOC package used.
+ More details in include/dt-bindings/pinctrl/stm32-pinfunc.h
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0x1, 0x2, 0x4, 0x8, 0x100, 0x400, 0x800]
+
+patternProperties:
+ '^gpio@[0-9a-f]*$':
+ type: object
+ additionalProperties: false
+ properties:
+ gpio-controller: true
+ '#gpio-cells':
+ const: 2
+ interrupt-controller: true
+ '#interrupt-cells':
+ const: 2
+
+ reg:
+ maxItems: 1
+ clocks:
+ maxItems: 1
+ resets:
+ maxItems: 1
+ gpio-line-names: true
+ gpio-ranges:
+ minItems: 1
+ maxItems: 16
+ ngpios:
+ description:
+ Number of available gpios in a bank.
+ minimum: 1
+ maximum: 16
+
+ st,bank-name:
+ description:
+ Should be a name string for this bank as specified in the datasheet.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum:
+ - GPIOA
+ - GPIOB
+ - GPIOC
+ - GPIOD
+ - GPIOE
+ - GPIOF
+ - GPIOG
+ - GPIOH
+ - GPIOI
+ - GPIOJ
+ - GPIOK
+ - GPIOZ
+
+ st,bank-ioport:
+ description:
+ Should correspond to the EXTI IOport selection (EXTI line used
+ to select GPIOs as interrupts).
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 11
+
+ patternProperties:
+ "^(.+-hog(-[0-9]+)?)$":
+ type: object
+ required:
+ - gpio-hog
+
+ required:
+ - gpio-controller
+ - '#gpio-cells'
+ - reg
+ - clocks
+ - st,bank-name
+
+ '-[0-9]*$':
+ type: object
+ additionalProperties: false
+
+ patternProperties:
+ '^pins':
+ type: object
+ additionalProperties: false
+ description: |
+ A pinctrl node should contain at least one subnode representing the
+ pinctrl group available on the machine. Each subnode will list the
+ pins it needs, and how they should be configured, with regard to muxer
+ configuration, pullups, drive, output high/low and output speed.
+ properties:
+ pinmux:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description: |
+ Integer array, represents gpio pin number and mux setting.
+ Supported pin number and mux varies for different SoCs, and are
+ defined in dt-bindings/pinctrl/<soc>-pinfunc.h directly.
+ These defines are calculated as: ((port * 16 + line) << 8) | function
+ With:
+ - port: The gpio port index (PA = 0, PB = 1, ..., PK = 11)
+ - line: The line offset within the port (PA0 = 0, PA1 = 1, ..., PA15 = 15)
+ - function: The function number, can be:
+ * 0 : GPIO
+ * 1 : Alternate Function 0
+ * 2 : Alternate Function 1
+ * 3 : Alternate Function 2
+ * ...
+ * 16 : Alternate Function 15
+ * 17 : Analog
+ To simplify the usage, macro is available to generate "pinmux" field.
+ This macro is available here:
+ - include/dt-bindings/pinctrl/stm32-pinfunc.h
+ Some examples of using macro:
+ /* GPIO A9 set as alernate function 2 */
+ ... {
+ pinmux = <STM32_PINMUX('A', 9, AF2)>;
+ };
+ /* GPIO A9 set as GPIO */
+ ... {
+ pinmux = <STM32_PINMUX('A', 9, GPIO)>;
+ };
+ /* GPIO A9 set as analog */
+ ... {
+ pinmux = <STM32_PINMUX('A', 9, ANALOG)>;
+ };
+
+ bias-disable:
+ type: boolean
+ bias-pull-down:
+ type: boolean
+ bias-pull-up:
+ type: boolean
+ drive-push-pull:
+ type: boolean
+ drive-open-drain:
+ type: boolean
+ output-low:
+ type: boolean
+ output-high:
+ type: boolean
+ slew-rate:
+ description: |
+ 0: Low speed
+ 1: Medium speed
+ 2: Fast speed
+ 3: High speed
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3]
+
+ required:
+ - pinmux
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - '#address-cells'
+ - '#size-cells'
+ - ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/stm32-pinfunc.h>
+ #include <dt-bindings/mfd/stm32f4-rcc.h>
+ //Example 1
+ pinctrl@40020000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stm32f429-pinctrl";
+ ranges = <0 0x40020000 0x3000>;
+
+ gpioa: gpio@0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x0 0x400>;
+ resets = <&reset_ahb1 0>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>;
+ st,bank-name = "GPIOA";
+ };
+ };
+
+ //Example 2 (using gpio-ranges)
+ pinctrl@50020000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stm32f429-pinctrl";
+ ranges = <0 0x50020000 0x3000>;
+
+ gpiob: gpio@1000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x1000 0x400>;
+ resets = <&reset_ahb1 0>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>;
+ st,bank-name = "GPIOB";
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpioc: gpio@2000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x2000 0x400>;
+ resets = <&reset_ahb1 0>;
+ clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>;
+ st,bank-name = "GPIOC";
+ ngpios = <5>;
+ gpio-ranges = <&pinctrl 0 16 3>,
+ <&pinctrl 14 30 2>;
+ };
+ };
+
+ //Example 3 pin groups
+ pinctrl {
+ usart1_pins_a: usart1-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('A', 9, AF7)>;
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('A', 10, AF7)>;
+ bias-disable;
+ };
+ };
+ };
+
+ usart1 {
+ pinctrl-0 = <&usart1_pins_a>;
+ pinctrl-names = "default";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml
new file mode 100644
index 0000000000..f3258f2fd3
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml
@@ -0,0 +1,307 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/starfive,jh7100-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7100 Pin Controller
+
+description: |
+ Bindings for the JH7100 RISC-V SoC from StarFive Ltd.
+
+ Out of the SoC's many pins only the ones named PAD_GPIO[0] to PAD_GPIO[63]
+ and PAD_FUNC_SHARE[0] to PAD_FUNC_SHARE[141] can be multiplexed and have
+ configurable bias, drive strength, schmitt trigger etc. The SoC has an
+ interesting 2-layered approach to pin muxing best illustrated by the diagram
+ below.
+
+ Signal group 0, 1, ... or 6
+ ___|___
+ | |
+ LCD output -----------------| |
+ CMOS Camera interface ------| |--- PAD_GPIO[0]
+ Ethernet PHY interface -----| MUX |--- PAD_GPIO[1]
+ ... | | ...
+ | |--- PAD_GPIO[63]
+ -------- GPIO0 ------------| |
+ | -------|-- GPIO1 --------| |--- PAD_FUNC_SHARE[0]
+ | | | | | |--- PAD_FUNC_SHARE[1]
+ | | | | ... | | ...
+ | | | | | |--- PAD_FUNC_SHARE[141]
+ | | -----|---|-- GPIO63 ---| |
+ | | | | | | -------
+ UART0 UART1 --
+
+
+ The big MUX in the diagram only has 7 different ways of mapping peripherals
+ on the left to pins on the right. StarFive calls the 7 configurations "signal
+ groups".
+ However some peripherals have their I/O go through the 64 "GPIOs". The
+ diagram only shows UART0 and UART1, but this also includes a number of other
+ UARTs, I2Cs, SPIs, PWMs etc. All these peripherals are connected to all 64
+ GPIOs such that any GPIO can be set up to be controlled by any of the
+ peripherals.
+ Note that signal group 0 doesn't map any of the GPIOs to pins, and only
+ signal group 1 maps the GPIOs to the pins named PAD_GPIO[0] to PAD_GPIO[63].
+
+maintainers:
+ - Emil Renner Berthing <kernel@esmil.dk>
+ - Drew Fustini <drew@beagleboard.org>
+
+properties:
+ compatible:
+ const: starfive,jh7100-pinctrl
+
+ reg:
+ minItems: 2
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: gpio
+ - const: padctl
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+ interrupts:
+ maxItems: 1
+ description: The GPIO parent interrupt.
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+
+ starfive,signal-group:
+ description: |
+ Select one of the 7 signal groups. If this property is not set it
+ defaults to the configuration already chosen by the earlier boot stages.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2, 3, 4, 5, 6]
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - gpio-controller
+ - "#gpio-cells"
+ - interrupts
+ - interrupt-controller
+ - "#interrupt-cells"
+
+patternProperties:
+ '-[0-9]+$':
+ type: object
+ patternProperties:
+ '-pins$':
+ type: object
+ description: |
+ A pinctrl node should contain at least one subnode representing the
+ pinctrl groups available on the machine. Each subnode will list the
+ pins it needs, and how they should be configured, with regard to
+ muxer configuration, bias, input enable/disable, input schmitt
+ trigger enable/disable, slew-rate and drive strength.
+ $ref: /schemas/pinctrl/pincfg-node.yaml
+
+ properties:
+ pins:
+ description: |
+ The list of pin identifiers that properties in the node apply to.
+ This should be set using either the PAD_GPIO or PAD_FUNC_SHARE
+ macros.
+ Either this or "pinmux" has to be specified, but not both.
+ $ref: /schemas/pinctrl/pinmux-node.yaml#/properties/pins
+
+ pinmux:
+ description: |
+ The list of GPIOs and their mux settings that properties in the
+ node apply to. This should be set using the GPIOMUX macro.
+ Either this or "pins" has to be specified, but not both.
+ $ref: /schemas/pinctrl/pinmux-node.yaml#/properties/pinmux
+
+ bias-disable: true
+
+ bias-pull-up:
+ type: boolean
+
+ bias-pull-down:
+ type: boolean
+
+ drive-strength:
+ enum: [ 14, 21, 28, 35, 42, 49, 56, 63 ]
+
+ input-enable: true
+
+ input-disable: true
+
+ input-schmitt-enable: true
+
+ input-schmitt-disable: true
+
+ slew-rate:
+ maximum: 7
+
+ starfive,strong-pull-up:
+ description: enable strong pull-up.
+ type: boolean
+
+ additionalProperties: false
+
+ additionalProperties: false
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/starfive-jh7100.h>
+ #include <dt-bindings/reset/starfive-jh7100.h>
+ #include <dt-bindings/pinctrl/pinctrl-starfive-jh7100.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pinctrl@11910000 {
+ compatible = "starfive,jh7100-pinctrl";
+ reg = <0x0 0x11910000 0x0 0x10000>,
+ <0x0 0x11858000 0x0 0x1000>;
+ reg-names = "gpio", "padctl";
+ clocks = <&clkgen JH7100_CLK_GPIO_APB>;
+ resets = <&clkgen JH7100_RSTN_GPIO_APB>;
+ interrupts = <32>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ starfive,signal-group = <6>;
+
+ gmac_pins_default: gmac-0 {
+ gtxclk-pins {
+ pins = <PAD_FUNC_SHARE(115)>;
+ bias-pull-up;
+ drive-strength = <35>;
+ input-enable;
+ input-schmitt-enable;
+ slew-rate = <0>;
+ };
+ miitxclk-pins {
+ pins = <PAD_FUNC_SHARE(116)>;
+ bias-pull-up;
+ drive-strength = <14>;
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ tx-pins {
+ pins = <PAD_FUNC_SHARE(117)>,
+ <PAD_FUNC_SHARE(119)>,
+ <PAD_FUNC_SHARE(120)>,
+ <PAD_FUNC_SHARE(121)>,
+ <PAD_FUNC_SHARE(122)>,
+ <PAD_FUNC_SHARE(123)>,
+ <PAD_FUNC_SHARE(124)>,
+ <PAD_FUNC_SHARE(125)>,
+ <PAD_FUNC_SHARE(126)>;
+ bias-disable;
+ drive-strength = <35>;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ rxclk-pins {
+ pins = <PAD_FUNC_SHARE(127)>;
+ bias-pull-up;
+ drive-strength = <14>;
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <6>;
+ };
+ rxer-pins {
+ pins = <PAD_FUNC_SHARE(129)>;
+ bias-pull-up;
+ drive-strength = <14>;
+ input-enable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ rx-pins {
+ pins = <PAD_FUNC_SHARE(128)>,
+ <PAD_FUNC_SHARE(130)>,
+ <PAD_FUNC_SHARE(131)>,
+ <PAD_FUNC_SHARE(132)>,
+ <PAD_FUNC_SHARE(133)>,
+ <PAD_FUNC_SHARE(134)>,
+ <PAD_FUNC_SHARE(135)>,
+ <PAD_FUNC_SHARE(136)>,
+ <PAD_FUNC_SHARE(137)>,
+ <PAD_FUNC_SHARE(138)>,
+ <PAD_FUNC_SHARE(139)>,
+ <PAD_FUNC_SHARE(140)>,
+ <PAD_FUNC_SHARE(141)>;
+ bias-pull-up;
+ drive-strength = <14>;
+ input-enable;
+ input-schmitt-enable;
+ slew-rate = <0>;
+ };
+ };
+
+ i2c0_pins_default: i2c0-0 {
+ i2c-pins {
+ pinmux = <GPIOMUX(62, GPO_LOW,
+ GPO_I2C0_PAD_SCK_OEN,
+ GPI_I2C0_PAD_SCK_IN)>,
+ <GPIOMUX(61, GPO_LOW,
+ GPO_I2C0_PAD_SDA_OEN,
+ GPI_I2C0_PAD_SDA_IN)>;
+ bias-disable; /* external pull-up */
+ input-enable;
+ input-schmitt-enable;
+ };
+ };
+
+ uart3_pins_default: uart3-0 {
+ rx-pins {
+ pinmux = <GPIOMUX(13, GPO_LOW, GPO_DISABLE,
+ GPI_UART3_PAD_SIN)>;
+ bias-pull-up;
+ input-enable;
+ input-schmitt-enable;
+ };
+ tx-pins {
+ pinmux = <GPIOMUX(14, GPO_UART3_PAD_SOUT,
+ GPO_ENABLE, GPI_NONE)>;
+ bias-disable;
+ input-disable;
+ input-schmitt-disable;
+ };
+ };
+ };
+
+ gmac {
+ pinctrl-0 = <&gmac_pins_default>;
+ pinctrl-names = "default";
+ };
+
+ i2c {
+ pinctrl-0 = <&i2c0_pins_default>;
+ pinctrl-names = "default";
+ };
+
+ uart3 {
+ pinctrl-0 = <&uart3_pins_default>;
+ pinctrl-names = "default";
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-aon-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-aon-pinctrl.yaml
new file mode 100644
index 0000000000..b470901f5f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-aon-pinctrl.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/starfive,jh7110-aon-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 AON Pin Controller
+
+description: |
+ Bindings for the JH7110 RISC-V SoC from StarFive Technology Ltd.
+
+ Out of the SoC's many pins only the ones named PAD_RGPIO0 to PAD_RGPIO3
+ can be multiplexed and have configurable bias, drive strength,
+ schmitt trigger etc.
+ Some peripherals such as PWM have their I/O go through the 4 "GPIOs".
+
+maintainers:
+ - Jianlong Huang <jianlong.huang@starfivetech.com>
+
+properties:
+ compatible:
+ const: starfive,jh7110-aon-pinctrl
+
+ reg:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+patternProperties:
+ '-[0-9]+$':
+ type: object
+ additionalProperties: false
+ patternProperties:
+ '-pins$':
+ type: object
+ description: |
+ A pinctrl node should contain at least one subnode representing the
+ pinctrl groups available on the machine. Each subnode will list the
+ pins it needs, and how they should be configured, with regard to
+ muxer configuration, bias, input enable/disable, input schmitt
+ trigger enable/disable, slew-rate and drive strength.
+ allOf:
+ - $ref: /schemas/pinctrl/pincfg-node.yaml
+ - $ref: /schemas/pinctrl/pinmux-node.yaml
+ additionalProperties: false
+
+ properties:
+ pinmux:
+ description: |
+ The list of GPIOs and their mux settings that properties in the
+ node apply to. This should be set using the GPIOMUX macro.
+
+ bias-disable: true
+
+ bias-pull-up:
+ type: boolean
+
+ bias-pull-down:
+ type: boolean
+
+ drive-strength:
+ enum: [ 2, 4, 8, 12 ]
+
+ input-enable: true
+
+ input-disable: true
+
+ input-schmitt-enable: true
+
+ input-schmitt-disable: true
+
+ slew-rate:
+ maximum: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+ - gpio-controller
+ - '#gpio-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ pinctrl@17020000 {
+ compatible = "starfive,jh7110-aon-pinctrl";
+ reg = <0x17020000 0x10000>;
+ resets = <&aoncrg 2>;
+ interrupts = <85>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ pwm-0 {
+ pwm-pins {
+ pinmux = <0xff030802>;
+ bias-disable;
+ drive-strength = <12>;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-sys-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-sys-pinctrl.yaml
new file mode 100644
index 0000000000..222b9e240f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-sys-pinctrl.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/starfive,jh7110-sys-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 SYS Pin Controller
+
+description: |
+ Bindings for the JH7110 RISC-V SoC from StarFive Technology Ltd.
+
+ Out of the SoC's many pins only the ones named PAD_GPIO0 to PAD_GPIO63
+ can be multiplexed and have configurable bias, drive strength,
+ schmitt trigger etc.
+ Some peripherals have their I/O go through the 64 "GPIOs". This also
+ includes a number of other UARTs, I2Cs, SPIs, PWMs etc.
+ All these peripherals are connected to all 64 GPIOs such that
+ any GPIO can be set up to be controlled by any of the peripherals.
+
+maintainers:
+ - Jianlong Huang <jianlong.huang@starfivetech.com>
+
+properties:
+ compatible:
+ const: starfive,jh7110-sys-pinctrl
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+patternProperties:
+ '-[0-9]+$':
+ type: object
+ additionalProperties: false
+ patternProperties:
+ '-pins$':
+ type: object
+ description: |
+ A pinctrl node should contain at least one subnode representing the
+ pinctrl groups available on the machine. Each subnode will list the
+ pins it needs, and how they should be configured, with regard to
+ muxer configuration, bias, input enable/disable, input schmitt
+ trigger enable/disable, slew-rate and drive strength.
+ allOf:
+ - $ref: /schemas/pinctrl/pincfg-node.yaml
+ - $ref: /schemas/pinctrl/pinmux-node.yaml
+ additionalProperties: false
+
+ properties:
+ pinmux:
+ description: |
+ The list of GPIOs and their mux settings that properties in the
+ node apply to. This should be set using the GPIOMUX or PINMUX
+ macros.
+
+ bias-disable: true
+
+ bias-pull-up:
+ type: boolean
+
+ bias-pull-down:
+ type: boolean
+
+ drive-strength:
+ enum: [ 2, 4, 8, 12 ]
+
+ input-enable: true
+
+ input-disable: true
+
+ input-schmitt-enable: true
+
+ input-schmitt-disable: true
+
+ slew-rate:
+ maximum: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+ - gpio-controller
+ - '#gpio-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ pinctrl@13040000 {
+ compatible = "starfive,jh7110-sys-pinctrl";
+ reg = <0x13040000 0x10000>;
+ clocks = <&syscrg 112>;
+ resets = <&syscrg 2>;
+ interrupts = <86>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ uart0-0 {
+ tx-pins {
+ pinmux = <0xff140005>;
+ bias-disable;
+ drive-strength = <12>;
+ input-disable;
+ input-schmitt-disable;
+ slew-rate = <0>;
+ };
+
+ rx-pins {
+ pinmux = <0x0E000406>;
+ bias-pull-up;
+ drive-strength = <2>;
+ input-enable;
+ input-schmitt-enable;
+ slew-rate = <0>;
+ };
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/ste,abx500.txt b/Documentation/devicetree/bindings/pinctrl/ste,abx500.txt
new file mode 100644
index 0000000000..8769742043
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ste,abx500.txt
@@ -0,0 +1,318 @@
+ST Ericsson abx500 pinmux controller
+
+Required properties:
+- compatible: "stericsson,ab8500-gpio", "stericsson,ab8540-gpio",
+ "stericsson,ab8505-gpio", "stericsson,ab9540-gpio",
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+ST Ericsson's pin configuration nodes use the generic pin multiplexing
+and pin configuration bindings, see pinctrl-bindings.txt
+
+Example board file extract:
+
+&pinctrl_abx500 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sysclkreq2_default_mode>, <&sysclkreq3_default_mode>, <&gpio3_default_mode>, <&sysclkreq6_default_mode>, <&pwmout1_default_mode>, <&pwmout2_default_mode>, <&pwmout3_default_mode>, <&adi1_default_mode>, <&dmic12_default_mode>, <&dmic34_default_mode>, <&dmic56_default_mode>, <&sysclkreq5_default_mode>, <&batremn_default_mode>, <&service_default_mode>, <&pwrctrl0_default_mode>, <&pwrctrl1_default_mode>, <&pwmextvibra1_default_mode>, <&pwmextvibra2_default_mode>, <&gpio51_default_mode>, <&gpio52_default_mode>, <&gpio53_default_mode>, <&gpio54_default_mode>, <&pdmclkdat_default_mode>;
+
+ sysclkreq2 {
+ sysclkreq2_default_mode: sysclkreq2_default {
+ default_mux {
+ function = "sysclkreq";
+ groups = "sysclkreq2_d_1";
+ };
+ default_cfg {
+ pins = "GPIO1";
+ bias-disable;
+ };
+ };
+ };
+ sysclkreq3 {
+ sysclkreq3_default_mode: sysclkreq3_default {
+ default_mux {
+ function = "sysclkreq";
+ groups = "sysclkreq3_d_1";
+ };
+ default_cfg {
+ pins = "GPIO2";
+ output-low;
+ };
+ };
+ };
+ gpio3 {
+ gpio3_default_mode: gpio3_default {
+ default_mux {
+ function = "gpio";
+ groups = "gpio3_a_1";
+ };
+ default_cfg {
+ pins = "GPIO3";
+ output-low;
+ };
+ };
+ };
+ sysclkreq6 {
+ sysclkreq6_default_mode: sysclkreq6_default {
+ default_mux {
+ function = "sysclkreq";
+ groups = "sysclkreq6_d_1";
+ };
+ default_cfg {
+ pins = "GPIO4";
+ bias-disable;
+ };
+ };
+ };
+ pwmout1 {
+ pwmout1_default_mode: pwmout1_default {
+ default_mux {
+ function = "pwmout";
+ groups = "pwmout1_d_1";
+ };
+ default_cfg {
+ pins = "GPIO14";
+ output-low;
+ };
+ };
+ };
+ pwmout2 {
+ pwmout2_default_mode: pwmout2_default {
+ pwmout2_default_mux {
+ function = "pwmout";
+ groups = "pwmout2_d_1";
+ };
+ pwmout2_default_cfg {
+ pins = "GPIO15";
+ output-low;
+ };
+ };
+ };
+ pwmout3 {
+ pwmout3_default_mode: pwmout3_default {
+ pwmout3_default_mux {
+ function = "pwmout";
+ groups = "pwmout3_d_1";
+ };
+ pwmout3_default_cfg {
+ pins = "GPIO16";
+ output-low;
+ };
+ };
+ };
+ adi1 {
+
+ adi1_default_mode: adi1_default {
+ adi1_default_mux {
+ function = "adi1";
+ groups = "adi1_d_1";
+ };
+ adi1_default_cfg1 {
+ pins = "GPIO17","GPIO19","GPIO20";
+ bias-disable;
+ };
+ adi1_default_cfg2 {
+ pins = "GPIO18";
+ output-low;
+ };
+ };
+ };
+ dmic12 {
+ dmic12_default_mode: dmic12_default {
+ dmic12_default_mux {
+ function = "dmic";
+ groups = "dmic12_d_1";
+ };
+ dmic12_default_cfg1 {
+ pins = "GPIO27";
+ output-low;
+ };
+ dmic12_default_cfg2 {
+ pins = "GPIO28";
+ bias-disable;
+ };
+ };
+ };
+ dmic34 {
+ dmic34_default_mode: dmic34_default {
+ dmic34_default_mux {
+ function = "dmic";
+ groups = "dmic34_d_1";
+ };
+ dmic34_default_cfg1 {
+ pins = "GPIO29";
+ output-low;
+ };
+ dmic34_default_cfg2 {
+ pins = "GPIO30";
+ bias-disable;{
+
+ };
+ };
+ };
+ dmic56 {
+ dmic56_default_mode: dmic56_default {
+ dmic56_default_mux {
+ function = "dmic";
+ groups = "dmic56_d_1";
+ };
+ dmic56_default_cfg1 {
+ pins = "GPIO31";
+ output-low;
+ };
+ dmic56_default_cfg2 {
+ pins = "GPIO32";
+ bias-disable;
+ };
+ };
+ };
+ sysclkreq5 {
+ sysclkreq5_default_mode: sysclkreq5_default {
+ sysclkreq5_default_mux {
+ function = "sysclkreq";
+ groups = "sysclkreq5_d_1";
+ };
+ sysclkreq5_default_cfg {
+ pins = "GPIO42";
+ output-low;
+ };
+ };
+ };
+ batremn {
+ batremn_default_mode: batremn_default {
+ batremn_default_mux {
+ function = "batremn";
+ groups = "batremn_d_1";
+ };
+ batremn_default_cfg {
+ pins = "GPIO43";
+ bias-disable;
+ };
+ };
+ };
+ service {
+ service_default_mode: service_default {
+ service_default_mux {
+ function = "service";
+ groups = "service_d_1";
+ };
+ service_default_cfg {
+ pins = "GPIO44";
+ bias-disable;
+ };
+ };
+ };
+ pwrctrl0 {
+ pwrctrl0_default_mux: pwrctrl0_mux {
+ pwrctrl0_default_mux {
+ function = "pwrctrl";
+ groups = "pwrctrl0_d_1";
+ };
+ };
+ pwrctrl0_default_mode: pwrctrl0_default {
+ pwrctrl0_default_cfg {
+ pins = "GPIO45";
+ bias-disable;
+ };
+ };
+ };
+ pwrctrl1 {
+ pwrctrl1_default_mux: pwrctrl1_mux {
+ pwrctrl1_default_mux {
+ function = "pwrctrl";
+ groups = "pwrctrl1_d_1";
+ };
+ };
+ pwrctrl1_default_mode: pwrctrl1_default {
+ pwrctrl1_default_cfg {
+ pins = "GPIO46";
+ bias-disable;
+ };
+ };
+ };
+ pwmextvibra1 {
+ pwmextvibra1_default_mode: pwmextvibra1_default {
+ pwmextvibra1_default_mux {
+ function = "pwmextvibra";
+ groups = "pwmextvibra1_d_1";
+ };
+ pwmextvibra1_default_cfg {
+ pins = "GPIO47";
+ bias-disable;
+ };
+ };
+ };
+ pwmextvibra2 {
+ pwmextvibra2_default_mode: pwmextvibra2_default {
+ pwmextvibra2_default_mux {
+ function = "pwmextvibra";
+ groups = "pwmextvibra2_d_1";
+ };
+ pwmextvibra1_default_cfg {
+ pins = "GPIO48";
+ bias-disable;
+ };
+ };
+ };
+ gpio51 {
+ gpio51_default_mode: gpio51_default {
+ gpio51_default_mux {
+ function = "gpio";
+ groups = "gpio51_a_1";
+ };
+ gpio51_default_cfg {
+ pins = "GPIO51";
+ output-low;
+ };
+ };
+ };
+ gpio52 {
+ gpio52_default_mode: gpio52_default {
+ gpio52_default_mux {
+ function = "gpio";
+ groups = "gpio52_a_1";
+ };
+ gpio52_default_cfg {
+ pins = "GPIO52";
+ bias-pull-down;
+ };
+ };
+ };
+ gpio53 {
+ gpio53_default_mode: gpio53_default {
+ gpio53_default_mux {
+ function = "gpio";
+ groups = "gpio53_a_1";
+ };
+ gpio53_default_cfg {
+ pins = "GPIO53";
+ bias-pull-down;
+ };
+ };
+ };
+ gpio54 {
+ gpio54_default_mode: gpio54_default {
+ gpio54_default_mux {
+ function = "gpio";
+ groups = "gpio54_a_1";
+ };
+ gpio54_default_cfg {
+ pins = "GPIO54";
+ output-low;
+ };
+ };
+ };
+ pdmclkdat {
+ pdmclkdat_default_mode: pdmclkdat_default {
+ pdmclkdat_default_mux {
+ function = "pdm";
+ groups = "pdmclkdat_d_1";
+ };
+ pdmclkdat_default_cfg {
+ pins = "GPIO55", "GPIO56";
+ bias-disable;
+ };
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt b/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt
new file mode 100644
index 0000000000..2213802435
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt
@@ -0,0 +1,148 @@
+ST Ericsson Nomadik pinmux controller
+
+Required properties:
+- compatible: "stericsson,db8500-pinctrl", "stericsson,db8540-pinctrl",
+ "stericsson,stn8815-pinctrl"
+- nomadik-gpio-chips: array of phandles to the corresponding GPIO chips
+ (these have the register ranges used by the pin controller).
+- prcm: phandle to the PRCMU managing the back end of this pin controller
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+ST Ericsson's pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as input, output, pull up, pull down...
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content. The subnodes use the generic
+pin multiplexing node layout from the standard pin control bindings
+(see pinctrl-bindings.txt):
+
+Required pin multiplexing subnode properties:
+- function: A string containing the name of the function to mux to the
+ pin or group.
+- groups : An array of strings. Each string contains the name of a pin
+ group that will be combined with the function to form a multiplexing
+ set-up.
+
+Required pin configuration subnode properties:
+- pins: A string array describing the pins affected by the configuration
+ in the node.
+- ste,config: Handle of pin configuration node
+ (e.g. ste,config = <&slpm_in_wkup_pdis>)
+
+- ste,input : <0/1/2>
+ 0: input with no pull
+ 1: input with pull up,
+ 2: input with pull down,
+
+- ste,output: <0/1/2>
+ 0: output low,
+ 1: output high,
+ 2: output (value is not specified).
+
+- ste,sleep: <0/1>
+ 0: sleep mode disable,
+ 1: sleep mode enable.
+
+- ste,sleep-input: <0/1/2/3>
+ 0: sleep input with no pull,
+ 1: sleep input with pull up,
+ 2: sleep input with pull down.
+ 3: sleep input and keep last input configuration (no pull, pull up or pull down).
+
+- ste,sleep-output: <0/1/2>
+ 0: sleep output low,
+ 1: sleep output high,
+ 2: sleep output (value is not specified).
+
+- ste,sleep-gpio: <0/1>
+ 0: disable sleep gpio mode,
+ 1: enable sleep gpio mode.
+
+- ste,sleep-wakeup: <0/1>
+ 0: wake-up detection enabled,
+ 1: wake-up detection disabled.
+
+- ste,sleep-pull-disable: <0/1>
+ 0: GPIO pull-up or pull-down resistor is enabled, when pin is an input,
+ 1: GPIO pull-up and pull-down resistor are disabled.
+
+Example board file extract:
+
+ pinctrl@80157000 {
+ compatible = "stericsson,db8500-pinctrl";
+ nomadik-gpio-chips = <&gpio0>, <&gpio1>, <&gpio2>, <&gpio3>;
+ prcm = <&prcmu>;
+
+ pinctrl-names = "default";
+
+ slpm_in_wkup_pdis: slpm_in_wkup_pdis {
+ ste,sleep = <1>;
+ ste,sleep-input = <3>;
+ ste,sleep-wakeup = <1>;
+ ste,sleep-pull-disable = <0>;
+ };
+
+ slpm_out_hi_wkup_pdis: slpm_out_hi_wkup_pdis {
+ ste,sleep = <1>;
+ ste,sleep-output = <1>;
+ ste,sleep-wakeup = <1>;
+ ste,sleep-pull-disable = <0>;
+ };
+
+ slpm_out_wkup_pdis: slpm_out_wkup_pdis {
+ ste,sleep = <1>;
+ ste,sleep-output = <2>;
+ ste,sleep-wakeup = <1>;
+ ste,sleep-pull-disable = <0>;
+ };
+
+ uart0 {
+ uart0_default_mux: uart0_mux {
+ u0_default_mux {
+ function = "u0";
+ pins = "u0_a_1";
+ };
+ };
+ uart0_default_mode: uart0_default {
+ uart0_default_cfg1 {
+ pins = "GPIO0", "GPIO2";
+ ste,input = <1>;
+ };
+
+ uart0_default_cfg2 {
+ pins = "GPIO1", "GPIO3";
+ ste,output = <1>;
+ };
+ };
+ uart0_sleep_mode: uart0_sleep {
+ uart0_sleep_cfg1 {
+ pins = "GPIO0", "GPIO2";
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ uart0_sleep_cfg2 {
+ pins = "GPIO1";
+ ste,config = <&slpm_out_hi_wkup_pdis>;
+ };
+ uart0_sleep_cfg3 {
+ pins = "GPIO3";
+ ste,config = <&slpm_out_wkup_pdis>;
+ };
+ };
+ };
+ };
+
+ uart@80120000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x80120000 0x1000>;
+ interrupts = <0 11 0x4>;
+
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&uart0_default_mux>, <&uart0_default_mode>;
+ pinctrl-1 = <&uart0_sleep_mode>;
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml
new file mode 100644
index 0000000000..94b868c7ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml
@@ -0,0 +1,377 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/sunplus,sp7021-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 Pin Controller
+
+maintainers:
+ - Dvorkin Dmitry <dvorkin@tibbo.com>
+ - Wells Lu <wellslutw@gmail.com>
+
+description: |
+ The Sunplus SP7021 pin controller is used to control SoC pins. Please
+ refer to pinctrl-bindings.txt in this directory for details of the common
+ pinctrl bindings used by client devices.
+
+ SP7021 has 99 digital GPIO pins which are numbered from GPIO 0 to 98. All
+ are multiplexed with some special function pins. SP7021 has 3 types of
+ special function pins:
+
+ (1) function-group pins:
+ Ex 1 (SPI-NOR flash):
+ If control-field SPI_FLASH_SEL is set to 1, GPIO 83, 84, 86 and 87
+ will be pins of SPI-NOR flash. If it is set to 2, GPIO 76, 78, 79
+ and 81 will be pins of SPI-NOR flash.
+
+ Ex 2 (UART_0):
+ If control-bit UA0_SEL is set to 1, GPIO 88 and 89 will be TX and
+ RX pins of UART_0 (UART channel 0).
+
+ Ex 3 (eMMC):
+ If control-bit EMMC_SEL is set to 1, GPIO 72, 73, 74, 75, 76, 77,
+ 78, 79, 80, 81 will be pins of an eMMC device.
+
+ Properties "function" and "groups" are used to select function-group
+ pins.
+
+ (2) fully pin-mux (like phone exchange mux) pins:
+ GPIO 8 to 71 are 'fully pin-mux' pins. Any pins of peripherals of
+ SP7021 (ex: UART_1, UART_2, UART_3, UART_4, I2C_0, I2C_1, and etc.)
+ can be routed to any pins of fully pin-mux pins.
+
+ Ex 1 (UART channel 1):
+ If control-field UA1_TX_SEL is set to 3, TX pin of UART_1 will be
+ routed to GPIO 10 (3 - 1 + 8 = 10).
+ If control-field UA1_RX_SEL is set to 4, RX pin of UART_1 will be
+ routed to GPIO 11 (4 - 1 + 8 = 11).
+ If control-field UA1_RTS_SEL is set to 5, RTS pin of UART_1 will
+ be routed to GPIO 12 (5 - 1 + 8 = 12).
+ If control-field UA1_CTS_SEL is set to 6, CTS pin of UART_1 will
+ be routed to GPIO 13 (6 - 1 + 8 = 13).
+
+ Ex 2 (I2C channel 0):
+ If control-field I2C0_CLK_SEL is set to 20, CLK pin of I2C_0 will
+ be routed to GPIO 27 (20 - 1 + 8 = 27).
+ If control-field I2C0_DATA_SEL is set to 21, DATA pin of I2C_0
+ will be routed to GPIO 28 (21 - 1 + 9 = 28).
+
+ Totally, SP7021 has 120 peripheral pins. The peripheral pins can be
+ routed to any of 64 'fully pin-mux' pins.
+
+ (3) I/O processor pins
+ SP7021 has a built-in I/O processor.
+ Any GPIO pins (GPIO 0 to 98) can be set to pins of I/O processor.
+
+ Vendor property "sunplus,pins" is used to select "fully pin-mux" pins,
+ "I/O processor pins" and "digital GPIO" pins.
+
+ The device node of pin controller of Sunplus SP7021 has following
+ properties.
+
+properties:
+ compatible:
+ const: sunplus,sp7021-pctl
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ reg:
+ items:
+ - description: the MOON2 registers
+ - description: the GPIOXT registers
+ - description: the FIRST registers
+ - description: the MOON1 registers
+
+ reg-names:
+ items:
+ - const: moon2
+ - const: gpioxt
+ - const: first
+ - const: moon1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+patternProperties:
+ '-pins$':
+ type: object
+ description: |
+ A pinctrl node should contain at least one subnodes representing the
+ pins or function-pins group available on the machine. Each subnode
+ will list the pins it needs, and how they should be configured.
+
+ Pinctrl node's client devices use subnodes for desired pin
+ configuration. Client device subnodes use below standard properties.
+ $ref: pinmux-node.yaml#
+
+ properties:
+ sunplus,pins:
+ description: |
+ Define 'sunplus,pins' which are used by pinctrl node's client
+ device.
+
+ It consists of one or more integers which represents the config
+ setting for corresponding pin. Each integer defines a individual
+ pin in which:
+
+ Bit 32~24: defines GPIO number. Its range is 0 ~ 98.
+ Bit 23~16: defines types: (1) fully pin-mux pins
+ (2) IO processor pins
+ (3) digital GPIO pins
+ Bit 15~8: defines pins of peripherals (which are defined in
+ 'include/dt-binging/pinctrl/sppctl.h').
+ Bit 7~0: defines types or initial-state of digital GPIO pins.
+
+ Please use macro SPPCTL_IOPAD to define the integers for pins.
+
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ function:
+ description: |
+ Define pin-function which is used by pinctrl node's client device.
+ The name should be one of string in the following enumeration.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ SPI_FLASH, SPI_FLASH_4BIT, SPI_NAND, CARD0_EMMC, SD_CARD,
+ UA0, FPGA_IFX, HDMI_TX, LCDIF, USB0_OTG, USB1_OTG ]
+
+ groups:
+ description: |
+ Define pin-group in a specified pin-function.
+ The name should be one of string in the following enumeration.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ SPI_FLASH1, SPI_FLASH2, SPI_FLASH_4BIT1, SPI_FLASH_4BIT2,
+ SPI_NAND, CARD0_EMMC, SD_CARD, UA0, FPGA_IFX, HDMI_TX1,
+ HDMI_TX2, HDMI_TX3, LCDIF, USB0_OTG, USB1_OTG ]
+
+ sunplus,zerofunc:
+ description: |
+ This is a vendor specific property. It is used to disable pins
+ which are not used by pinctrl node's client device.
+ Some pins may be enabled by boot-loader. We can use this
+ property to disable them.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ additionalProperties: false
+
+ allOf:
+ - if:
+ properties:
+ function:
+ enum:
+ - SPI_FLASH
+ then:
+ properties:
+ groups:
+ enum:
+ - SPI_FLASH1
+ - SPI_FLASH2
+ - if:
+ properties:
+ function:
+ enum:
+ - SPI_FLASH_4BIT
+ then:
+ properties:
+ groups:
+ enum:
+ - SPI_FLASH_4BIT1
+ - SPI_FLASH_4BIT2
+ - if:
+ properties:
+ function:
+ enum:
+ - SPI_NAND
+ then:
+ properties:
+ groups:
+ enum:
+ - SPI_NAND
+ - if:
+ properties:
+ function:
+ enum:
+ - CARD0_EMMC
+ then:
+ properties:
+ groups:
+ enum:
+ - CARD0_EMMC
+ - if:
+ properties:
+ function:
+ enum:
+ - SD_CARD
+ then:
+ properties:
+ groups:
+ enum:
+ - SD_CARD
+ - if:
+ properties:
+ function:
+ enum:
+ - UA0
+ then:
+ properties:
+ groups:
+ enum:
+ - UA0
+ - if:
+ properties:
+ function:
+ enum:
+ - FPGA_IFX
+ then:
+ properties:
+ groups:
+ enum:
+ - FPGA_IFX
+ - if:
+ properties:
+ function:
+ enum:
+ - HDMI_TX
+ then:
+ properties:
+ groups:
+ enum:
+ - HDMI_TX1
+ - HDMI_TX2
+ - HDMI_TX3
+ - if:
+ properties:
+ function:
+ enum:
+ - LCDIF
+ then:
+ properties:
+ groups:
+ enum:
+ - LCDIF
+ - if:
+ properties:
+ function:
+ enum:
+ - USB0_OTG
+ then:
+ properties:
+ groups:
+ enum:
+ - USB0_OTG
+ - if:
+ properties:
+ function:
+ enum:
+ - USB1_OTG
+ then:
+ properties:
+ groups:
+ enum:
+ - USB1_OTG
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - "#gpio-cells"
+ - gpio-controller
+ - clocks
+ - resets
+
+additionalProperties: false
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/sppctl-sp7021.h>
+
+ pinctrl@9c000100 {
+ compatible = "sunplus,sp7021-pctl";
+ reg = <0x9c000100 0x100>, <0x9c000300 0x100>,
+ <0x9c0032e4 0x1c>, <0x9c000080 0x20>;
+ reg-names = "moon2", "gpioxt", "first", "moon1";
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clkc 0x83>;
+ resets = <&rstc 0x73>;
+
+ uart0-pins {
+ function = "UA0";
+ groups = "UA0";
+ };
+
+ spinand0-pins {
+ function = "SPI_NAND";
+ groups = "SPI_NAND";
+ };
+
+ uart1-pins {
+ sunplus,pins = <
+ SPPCTL_IOPAD(11, SPPCTL_PCTL_G_PMUX, MUXF_UA1_TX, 0)
+ SPPCTL_IOPAD(10, SPPCTL_PCTL_G_PMUX, MUXF_UA1_RX, 0)
+ >;
+ };
+
+ uart2-pins {
+ sunplus,pins = <
+ SPPCTL_IOPAD(20, SPPCTL_PCTL_G_PMUX, MUXF_UA1_TX, 0)
+ SPPCTL_IOPAD(21, SPPCTL_PCTL_G_PMUX, MUXF_UA1_RX, 0)
+ SPPCTL_IOPAD(22, SPPCTL_PCTL_G_PMUX, MUXF_UA1_RTS, 0)
+ SPPCTL_IOPAD(23, SPPCTL_PCTL_G_PMUX, MUXF_UA1_CTS, 0)
+ >;
+ };
+
+ emmc-pins {
+ function = "CARD0_EMMC";
+ groups = "CARD0_EMMC";
+ };
+
+ sdcard-pins {
+ function = "SD_CARD";
+ groups = "SD_CARD";
+ sunplus,pins = < SPPCTL_IOPAD(91, SPPCTL_PCTL_G_GPIO, 0, 0) >;
+ };
+
+ hdmi_A_tx1-pins {
+ function = "HDMI_TX";
+ groups = "HDMI_TX1";
+ };
+ hdmi_A_tx2-pins {
+ function = "HDMI_TX";
+ groups = "HDMI_TX2";
+ };
+ hdmi_A_tx3-pins {
+ function = "HDMI_TX";
+ groups = "HDMI_TX3";
+ };
+
+ ethernet-pins {
+ sunplus,pins = <
+ SPPCTL_IOPAD(49,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_CLK_OUT,0)
+ SPPCTL_IOPAD(44,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDC,0)
+ SPPCTL_IOPAD(43,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_MAC_SMI_MDIO,0)
+ SPPCTL_IOPAD(52,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXEN,0)
+ SPPCTL_IOPAD(50,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD0,0)
+ SPPCTL_IOPAD(51,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_TXD1,0)
+ SPPCTL_IOPAD(46,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_CRSDV,0)
+ SPPCTL_IOPAD(47,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD0,0)
+ SPPCTL_IOPAD(48,SPPCTL_PCTL_G_PMUX,MUXF_L2SW_P0_MAC_RMII_RXD1,0)
+ >;
+ sunplus,zerofunc = <
+ MUXF_L2SW_LED_FLASH0
+ MUXF_L2SW_LED_ON0
+ MUXF_L2SW_P0_MAC_RMII_RXER
+ >;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/ti,da850-pupd.txt b/Documentation/devicetree/bindings/pinctrl/ti,da850-pupd.txt
new file mode 100644
index 0000000000..7f2980567c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ti,da850-pupd.txt
@@ -0,0 +1,55 @@
+* Pin configuration for TI DA850/OMAP-L138/AM18x
+
+These SoCs have a separate controller for setting bias (internal pullup/down).
+Bias can only be selected for groups rather than individual pins.
+
+Required Properties:
+
+ - compatible: Must be "ti,da850-pupd"
+ - reg: Base address and length of the memory resource used by the pullup/down
+ controller hardware module.
+
+The controller node also acts as a container for pin group configuration nodes.
+The names of these groups are ignored.
+
+Pin Group Node Properties:
+
+- groups: An array of strings, each string containing the name of a pin group.
+ Valid names are "cp0".."cp31".
+
+The pin configuration parameters use the generic pinconf bindings defined in
+pinctrl-bindings.txt in this directory. The supported parameters are
+bias-disable, bias-pull-up, bias-pull-down.
+
+
+Example
+-------
+
+In common dtsi file:
+
+ pinconf: pin-controller@22c00c {
+ compatible = "ti,da850-pupd";
+ reg = <0x22c00c 0x8>;
+ };
+
+In board-specific file:
+
+ &pinconf {
+ pinctrl-0 = <&pinconf_bias_groups>;
+ pinctrl-names = "default";
+
+ pinconf_bias_groups: bias-groups {
+ pull-up {
+ groups = "cp30", "cp31";
+ bias-pull-up;
+ };
+ pull-down {
+ groups = "cp29", "cp28";
+ bias-pull-down;
+ };
+ disable {
+ groups = "cp27", "cp26";
+ bias-disable;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/ti,iodelay.txt b/Documentation/devicetree/bindings/pinctrl/ti,iodelay.txt
new file mode 100644
index 0000000000..c3ed1232b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ti,iodelay.txt
@@ -0,0 +1,47 @@
+* Pin configuration for TI IODELAY controller
+
+TI dra7 based SoCs such as am57xx have a controller for setting the IO delay
+for each pin. For most part the IO delay values are programmed by the bootloader,
+but some pins need to be configured dynamically by the kernel such as the
+MMC pins.
+
+Required Properties:
+
+ - compatible: Must be "ti,dra7-iodelay"
+ - reg: Base address and length of the memory resource used
+ - #address-cells: Number of address cells
+ - #size-cells: Size of cells
+ - #pinctrl-cells: Number of pinctrl cells, must be 2. See also
+ Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+Example
+-------
+
+In the SoC specific dtsi file:
+
+ dra7_iodelay_core: padconf@4844a000 {
+ compatible = "ti,dra7-iodelay";
+ reg = <0x4844a000 0x0d1c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #pinctrl-cells = <2>;
+ };
+
+In board-specific file:
+
+&dra7_iodelay_core {
+ mmc2_iodelay_3v3_conf: mmc2_iodelay_3v3_conf {
+ pinctrl-pin-array = <
+ 0x18c A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A19_IN */
+ 0x1a4 A_DELAY_PS(265) G_DELAY_PS(360) /* CFG_GPMC_A20_IN */
+ 0x1b0 A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A21_IN */
+ 0x1bc A_DELAY_PS(0) G_DELAY_PS(120) /* CFG_GPMC_A22_IN */
+ 0x1c8 A_DELAY_PS(287) G_DELAY_PS(420) /* CFG_GPMC_A23_IN */
+ 0x1d4 A_DELAY_PS(144) G_DELAY_PS(240) /* CFG_GPMC_A24_IN */
+ 0x1e0 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_A25_IN */
+ 0x1ec A_DELAY_PS(120) G_DELAY_PS(0) /* CFG_GPMC_A26_IN */
+ 0x1f8 A_DELAY_PS(120) G_DELAY_PS(180) /* CFG_GPMC_A27_IN */
+ 0x360 A_DELAY_PS(0) G_DELAY_PS(0) /* CFG_GPMC_CS1_IN */
+ >;
+ };
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml
new file mode 100644
index 0000000000..19d47fd414
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/toshiba,visconti-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti TMPV770x pin mux/config controller
+
+maintainers:
+ - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+description:
+ Toshiba's Visconti ARM SoC a pin mux/config controller.
+
+properties:
+ compatible:
+ enum:
+ - toshiba,tmpv7708-pinctrl
+
+ reg:
+ maxItems: 1
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+
+patternProperties:
+ '-pins$':
+ type: object
+ description: |
+ A pinctrl node should contain at least one subnodes representing the
+ pinctrl groups available on the machine. Each subnode will list the
+ pins it needs, and how they should be configured, with regard to muxer
+ configuration, pullups, drive strength.
+ $ref: pinmux-node.yaml
+ additionalProperties: false
+
+ properties:
+ function:
+ description:
+ Function to mux.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [i2c0, i2c1, i2c2, i2c3, i2c4, i2c5, i2c6, i2c7, i2c8,
+ spi0, spi1, spi2, spi3, spi4, spi5, spi6,
+ uart0, uart1, uart2, uart3, pwm, pcmif_out, pcmif_in]
+
+ groups:
+ description:
+ Name of the pin group to use for the functions.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [i2c0_grp, i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp,
+ i2c5_grp, i2c6_grp, i2c7_grp, i2c8_grp,
+ spi0_grp, spi0_cs0_grp, spi0_cs1_grp, spi0_cs2_grp,
+ spi1_grp, spi2_grp, spi3_grp, spi4_grp, spi5_grp, spi6_grp,
+ uart0_grp, uart1_grp, uart2_grp, uart3_grp,
+ pwm0_gpio4_grp, pwm0_gpio8_grp, pwm0_gpio12_grp,
+ pwm0_gpio16_grp, pwm1_gpio5_grp, pwm1_gpio9_grp,
+ pwm1_gpio13_grp, pwm1_gpio17_grp, pwm2_gpio6_grp,
+ pwm2_gpio10_grp, pwm2_gpio14_grp, pwm2_gpio18_grp,
+ pwm3_gpio7_grp, pwm3_gpio11_grp, pwm3_gpio15_grp,
+ pwm3_gpio19_grp, pcmif_out_grp, pcmif_in_grp]
+
+ drive-strength:
+ enum: [2, 4, 6, 8, 16, 24, 32]
+ default: 2
+ description:
+ Selects the drive strength for the specified pins, in mA.
+
+ bias-pull-up: true
+
+ bias-pull-down: true
+
+ bias-disable: true
+
+additionalProperties: false
+
+examples:
+ # Pinmux controller node
+ - |
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pmux: pinmux@24190000 {
+ compatible = "toshiba,tmpv7708-pinctrl";
+ reg = <0 0x24190000 0 0x10000>;
+
+ spi0_pins: spi0-pins {
+ function = "spi0";
+ groups = "spi0_grp";
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml
new file mode 100644
index 0000000000..b85f9e36ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml
@@ -0,0 +1,217 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/xlnx,zynq-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Zynq Pinctrl
+
+maintainers:
+ - Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
+
+description: |
+ Please refer to pinctrl-bindings.txt in this directory for details of the
+ common pinctrl bindings used by client devices, including the meaning of the
+ phrase "pin configuration node".
+
+ Zynq's pin configuration nodes act as a container for an arbitrary number of
+ subnodes. Each of these subnodes represents some desired configuration for a
+ pin, a group, or a list of pins or groups. This configuration can include the
+ mux function to select on those pin(s)/group(s), and various pin configuration
+ parameters, such as pull-up, slew rate, etc.
+
+ Each configuration node can consist of multiple nodes describing the pinmux and
+ pinconf options. Those nodes can be pinmux nodes or pinconf nodes.
+
+ The name of each subnode is not important; all subnodes should be enumerated
+ and processed purely based on their content.
+
+properties:
+ compatible:
+ const: xlnx,zynq-pinctrl
+
+ reg:
+ description: Specifies the base address and size of the SLCR space.
+ maxItems: 1
+
+ syscon:
+ description:
+ phandle to the SLCR.
+
+patternProperties:
+ '^(.*-)?(default|gpio)$':
+ type: object
+ patternProperties:
+ '^mux':
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for pin muxes,
+ which in turn use below standard properties.
+ $ref: pinmux-node.yaml#
+
+ properties:
+ groups:
+ description:
+ List of groups to select (either this or "pins" must be
+ specified), available groups for this subnode.
+ items:
+ enum: [ethernet0_0_grp, ethernet1_0_grp, mdio0_0_grp,
+ mdio1_0_grp, qspi0_0_grp, qspi1_0_grp, qspi_fbclk,
+ qspi_cs1_grp, spi0_0_grp, spi0_1_grp, spi0_2_grp,
+ spi0_0_ss0, spi0_0_ss1, spi0_0_ss2, spi0_1_ss0,
+ spi0_1_ss1, spi0_1_ss2, spi0_2_ss0, spi0_2_ss1,
+ spi0_2_ss2, spi1_0_grp, spi1_1_grp, spi1_2_grp,
+ spi1_3_grp, spi1_0_ss0, spi1_0_ss1, spi1_0_ss2,
+ spi1_1_ss0, spi1_1_ss1, spi1_1_ss2, spi1_2_ss0,
+ spi1_2_ss1, spi1_2_ss2, spi1_3_ss0, spi1_3_ss1,
+ spi1_3_ss2, sdio0_0_grp, sdio0_1_grp, sdio0_2_grp,
+ sdio1_0_grp, sdio1_1_grp, sdio1_2_grp, sdio1_3_grp,
+ sdio0_emio_wp, sdio0_emio_cd, sdio1_emio_wp,
+ sdio1_emio_cd, smc0_nor, smc0_nor_cs1_grp,
+ smc0_nor_addr25_grp, smc0_nand, can0_0_grp, can0_1_grp,
+ can0_2_grp, can0_3_grp, can0_4_grp, can0_5_grp,
+ can0_6_grp, can0_7_grp, can0_8_grp, can0_9_grp,
+ can0_10_grp, can1_0_grp, can1_1_grp, can1_2_grp,
+ can1_3_grp, can1_4_grp, can1_5_grp, can1_6_grp,
+ can1_7_grp, can1_8_grp, can1_9_grp, can1_10_grp,
+ can1_11_grp, uart0_0_grp, uart0_1_grp, uart0_2_grp,
+ uart0_3_grp, uart0_4_grp, uart0_5_grp, uart0_6_grp,
+ uart0_7_grp, uart0_8_grp, uart0_9_grp, uart0_10_grp,
+ uart1_0_grp, uart1_1_grp, uart1_2_grp, uart1_3_grp,
+ uart1_4_grp, uart1_5_grp, uart1_6_grp, uart1_7_grp,
+ uart1_8_grp, uart1_9_grp, uart1_10_grp, uart1_11_grp,
+ i2c0_0_grp, i2c0_1_grp, i2c0_2_grp, i2c0_3_grp,
+ i2c0_4_grp, i2c0_5_grp, i2c0_6_grp, i2c0_7_grp,
+ i2c0_8_grp, i2c0_9_grp, i2c0_10_grp, i2c1_0_grp,
+ i2c1_1_grp, i2c1_2_grp, i2c1_3_grp, i2c1_4_grp,
+ i2c1_5_grp, i2c1_6_grp, i2c1_7_grp, i2c1_8_grp,
+ i2c1_9_grp, i2c1_10_grp, ttc0_0_grp, ttc0_1_grp,
+ ttc0_2_grp, ttc1_0_grp, ttc1_1_grp, ttc1_2_grp,
+ swdt0_0_grp, swdt0_1_grp, swdt0_2_grp, swdt0_3_grp,
+ swdt0_4_grp, gpio0_0_grp, gpio0_1_grp, gpio0_2_grp,
+ gpio0_3_grp, gpio0_4_grp, gpio0_5_grp, gpio0_6_grp,
+ gpio0_7_grp, gpio0_8_grp, gpio0_9_grp, gpio0_10_grp,
+ gpio0_11_grp, gpio0_12_grp, gpio0_13_grp, gpio0_14_grp,
+ gpio0_15_grp, gpio0_16_grp, gpio0_17_grp, gpio0_18_grp,
+ gpio0_19_grp, gpio0_20_grp, gpio0_21_grp, gpio0_22_grp,
+ gpio0_23_grp, gpio0_24_grp, gpio0_25_grp, gpio0_26_grp,
+ gpio0_27_grp, gpio0_28_grp, gpio0_29_grp, gpio0_30_grp,
+ gpio0_31_grp, gpio0_32_grp, gpio0_33_grp, gpio0_34_grp,
+ gpio0_35_grp, gpio0_36_grp, gpio0_37_grp, gpio0_38_grp,
+ gpio0_39_grp, gpio0_40_grp, gpio0_41_grp, gpio0_42_grp,
+ gpio0_43_grp, gpio0_44_grp, gpio0_45_grp, gpio0_46_grp,
+ gpio0_47_grp, gpio0_48_grp, gpio0_49_grp, gpio0_50_grp,
+ gpio0_51_grp, gpio0_52_grp, gpio0_53_grp, usb0_0_grp,
+ usb1_0_grp]
+ maxItems: 54
+
+ function:
+ description:
+ Specify the alternative function to be configured for the
+ given pin groups.
+ enum: [ethernet0, ethernet1, mdio0, mdio1, qspi0, qspi1, qspi_fbclk,
+ qspi_cs1, spi0, spi0_ss, spi1, spi1_ss, sdio0, sdio0_pc,
+ sdio0_cd, sdio0_wp, sdio1, sdio1_pc, sdio1_cd, sdio1_wp,
+ smc0_nor, smc0_nor_cs1, smc0_nor_addr25, smc0_nand, can0,
+ can1, uart0, uart1, i2c0, i2c1, ttc0, ttc1, swdt0, gpio0,
+ usb0, usb1]
+
+ required:
+ - groups
+ - function
+
+ additionalProperties: false
+
+ '^conf':
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for pin configurations,
+ which in turn use the standard properties below.
+ $ref: pincfg-node.yaml#
+
+ properties:
+ groups:
+ description:
+ List of pin groups as mentioned above.
+
+ pins:
+ description:
+ List of pin names to select in this subnode.
+ items:
+ pattern: '^MIO([0-9]|[1-4][0-9]|5[0-3])$'
+ maxItems: 54
+
+ bias-pull-up: true
+
+ bias-pull-down: true
+
+ bias-disable: true
+
+ bias-high-impedance: true
+
+ low-power-enable: true
+
+ low-power-disable: true
+
+ slew-rate:
+ enum: [0, 1]
+
+ power-source:
+ enum: [1, 2, 3, 4]
+
+ oneOf:
+ - required: [ groups ]
+ - required: [ pins ]
+
+ additionalProperties: false
+
+ additionalProperties: false
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+ - reg
+ - syscon
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/pinctrl-zynq.h>
+ pinctrl0: pinctrl@700 {
+ compatible = "xlnx,zynq-pinctrl";
+ reg = <0x700 0x200>;
+ syscon = <&slcr>;
+
+ pinctrl_uart1_default: uart1-default {
+ mux {
+ groups = "uart1_10_grp";
+ function = "uart1";
+ };
+
+ conf {
+ groups = "uart1_10_grp";
+ slew-rate = <0>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO49";
+ bias-high-impedance;
+ };
+
+ conf-tx {
+ pins = "MIO48";
+ bias-disable;
+ };
+ };
+ };
+
+ uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_default>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
new file mode 100644
index 0000000000..01b6f2b578
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml
@@ -0,0 +1,342 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/xlnx,zynqmp-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx ZynqMP Pinctrl
+
+maintainers:
+ - Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
+
+description: |
+ Please refer to pinctrl-bindings.txt in this directory for details of the
+ common pinctrl bindings used by client devices, including the meaning of the
+ phrase "pin configuration node".
+
+ ZynqMP's pin configuration nodes act as a container for an arbitrary number of
+ subnodes. Each of these subnodes represents some desired configuration for a
+ pin, a group, or a list of pins or groups. This configuration can include the
+ mux function to select on those pin(s)/group(s), and various pin configuration
+ parameters, such as pull-up, slew rate, etc.
+
+ Each configuration node can consist of multiple nodes describing the pinmux and
+ pinconf options. Those nodes can be pinmux nodes or pinconf nodes.
+
+ The name of each subnode is not important; all subnodes should be enumerated
+ and processed purely based on their content.
+
+properties:
+ compatible:
+ const: xlnx,zynqmp-pinctrl
+
+patternProperties:
+ '^(.*-)?(default|gpio)$':
+ type: object
+ patternProperties:
+ '^mux':
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for pin muxes,
+ which in turn use below standard properties.
+ $ref: pinmux-node.yaml#
+
+ properties:
+ groups:
+ description:
+ List of groups to select (either this or "pins" must be
+ specified), available groups for this subnode.
+ items:
+ enum: [ethernet0_0_grp, ethernet1_0_grp, ethernet2_0_grp,
+ ethernet3_0_grp, gemtsu0_0_grp, gemtsu0_1_grp,
+ gemtsu0_2_grp, mdio0_0_grp, mdio1_0_grp,
+ mdio1_1_grp, mdio2_0_grp, mdio3_0_grp,
+ qspi0_0_grp, qspi_ss_0_grp, qspi_fbclk_0_grp,
+ spi0_0_grp, spi0_ss_0_grp, spi0_ss_1_grp,
+ spi0_ss_2_grp, spi0_1_grp, spi0_ss_3_grp,
+ spi0_ss_4_grp, spi0_ss_5_grp, spi0_2_grp,
+ spi0_ss_6_grp, spi0_ss_7_grp, spi0_ss_8_grp,
+ spi0_3_grp, spi0_ss_9_grp, spi0_ss_10_grp,
+ spi0_ss_11_grp, spi0_4_grp, spi0_ss_12_grp,
+ spi0_ss_13_grp, spi0_ss_14_grp, spi0_5_grp,
+ spi0_ss_15_grp, spi0_ss_16_grp, spi0_ss_17_grp,
+ spi1_0_grp, spi1_ss_0_grp, spi1_ss_1_grp,
+ spi1_ss_2_grp, spi1_1_grp, spi1_ss_3_grp,
+ spi1_ss_4_grp, spi1_ss_5_grp, spi1_2_grp,
+ spi1_ss_6_grp, spi1_ss_7_grp, spi1_ss_8_grp,
+ spi1_3_grp, spi1_ss_9_grp, spi1_ss_10_grp,
+ spi1_ss_11_grp, spi1_4_grp, spi1_ss_12_grp,
+ spi1_ss_13_grp, spi1_ss_14_grp, spi1_5_grp,
+ spi1_ss_15_grp, spi1_ss_16_grp, spi1_ss_17_grp,
+ sdio0_0_grp, sdio0_1_grp, sdio0_2_grp,
+ sdio0_3_grp, sdio0_4_grp, sdio0_5_grp,
+ sdio0_6_grp, sdio0_7_grp, sdio0_8_grp,
+ sdio0_9_grp, sdio0_10_grp, sdio0_11_grp,
+ sdio0_12_grp, sdio0_13_grp, sdio0_14_grp,
+ sdio0_15_grp, sdio0_16_grp, sdio0_17_grp,
+ sdio0_18_grp, sdio0_19_grp, sdio0_20_grp,
+ sdio0_21_grp, sdio0_22_grp, sdio0_23_grp,
+ sdio0_24_grp, sdio0_25_grp, sdio0_26_grp,
+ sdio0_27_grp, sdio0_28_grp, sdio0_29_grp,
+ sdio0_30_grp, sdio0_31_grp, sdio0_32_grp,
+ sdio0_pc_0_grp, sdio0_cd_0_grp, sdio0_wp_0_grp,
+ sdio0_pc_1_grp, sdio0_cd_1_grp, sdio0_wp_1_grp,
+ sdio0_pc_2_grp, sdio0_cd_2_grp, sdio0_wp_2_grp,
+ sdio1_0_grp, sdio1_1_grp, sdio1_2_grp,
+ sdio1_3_grp, sdio1_4_grp, sdio1_5_grp,
+ sdio1_6_grp, sdio1_7_grp, sdio1_8_grp,
+ sdio1_9_grp, sdio1_10_grp, sdio1_11_grp,
+ sdio1_12_grp, sdio1_13_grp, sdio1_14_grp,
+ sdio1_15_grp, sdio1_pc_0_grp, sdio1_cd_0_grp,
+ sdio1_wp_0_grp, sdio1_pc_1_grp, sdio1_cd_1_grp,
+ sdio1_wp_1_grp, nand0_0_grp, nand0_ce_0_grp,
+ nand0_rb_0_grp, nand0_dqs_0_grp, nand0_ce_1_grp,
+ nand0_rb_1_grp, nand0_dqs_1_grp, can0_0_grp,
+ can0_1_grp, can0_2_grp, can0_3_grp,
+ can0_4_grp, can0_5_grp, can0_6_grp,
+ can0_7_grp, can0_8_grp, can0_9_grp,
+ can0_10_grp, can0_11_grp, can0_12_grp,
+ can0_13_grp, can0_14_grp, can0_15_grp,
+ can0_16_grp, can0_17_grp, can0_18_grp,
+ can1_0_grp, can1_1_grp, can1_2_grp,
+ can1_3_grp, can1_4_grp, can1_5_grp,
+ can1_6_grp, can1_7_grp, can1_8_grp,
+ can1_9_grp, can1_10_grp, can1_11_grp,
+ can1_12_grp, can1_13_grp, can1_14_grp,
+ can1_15_grp, can1_16_grp, can1_17_grp,
+ can1_18_grp, can1_19_grp, uart0_0_grp,
+ uart0_1_grp, uart0_2_grp, uart0_3_grp,
+ uart0_4_grp, uart0_5_grp, uart0_6_grp,
+ uart0_7_grp, uart0_8_grp, uart0_9_grp,
+ uart0_10_grp, uart0_11_grp, uart0_12_grp,
+ uart0_13_grp, uart0_14_grp, uart0_15_grp,
+ uart0_16_grp, uart0_17_grp, uart0_18_grp,
+ uart1_0_grp, uart1_1_grp, uart1_2_grp,
+ uart1_3_grp, uart1_4_grp, uart1_5_grp,
+ uart1_6_grp, uart1_7_grp, uart1_8_grp,
+ uart1_9_grp, uart1_10_grp, uart1_11_grp,
+ uart1_12_grp, uart1_13_grp, uart1_14_grp,
+ uart1_15_grp, uart1_16_grp, uart1_17_grp,
+ uart1_18_grp, i2c0_0_grp, i2c0_1_grp,
+ i2c0_2_grp, i2c0_3_grp, i2c0_4_grp,
+ i2c0_5_grp, i2c0_6_grp, i2c0_7_grp,
+ i2c0_8_grp, i2c0_9_grp, i2c0_10_grp,
+ i2c0_11_grp, i2c0_12_grp, i2c0_13_grp,
+ i2c0_14_grp, i2c0_15_grp, i2c0_16_grp,
+ i2c0_17_grp, i2c0_18_grp, i2c1_0_grp,
+ i2c1_1_grp, i2c1_2_grp, i2c1_3_grp,
+ i2c1_4_grp, i2c1_5_grp, i2c1_6_grp,
+ i2c1_7_grp, i2c1_8_grp, i2c1_9_grp,
+ i2c1_10_grp, i2c1_11_grp, i2c1_12_grp,
+ i2c1_13_grp, i2c1_14_grp, i2c1_15_grp,
+ i2c1_16_grp, i2c1_17_grp, i2c1_18_grp,
+ i2c1_19_grp, ttc0_clk_0_grp, ttc0_wav_0_grp,
+ ttc0_clk_1_grp, ttc0_wav_1_grp, ttc0_clk_2_grp,
+ ttc0_wav_2_grp, ttc0_clk_3_grp, ttc0_wav_3_grp,
+ ttc0_clk_4_grp, ttc0_wav_4_grp, ttc0_clk_5_grp,
+ ttc0_wav_5_grp, ttc0_clk_6_grp, ttc0_wav_6_grp,
+ ttc0_clk_7_grp, ttc0_wav_7_grp, ttc0_clk_8_grp,
+ ttc0_wav_8_grp, ttc1_clk_0_grp, ttc1_wav_0_grp,
+ ttc1_clk_1_grp, ttc1_wav_1_grp, ttc1_clk_2_grp,
+ ttc1_wav_2_grp, ttc1_clk_3_grp, ttc1_wav_3_grp,
+ ttc1_clk_4_grp, ttc1_wav_4_grp, ttc1_clk_5_grp,
+ ttc1_wav_5_grp, ttc1_clk_6_grp, ttc1_wav_6_grp,
+ ttc1_clk_7_grp, ttc1_wav_7_grp, ttc1_clk_8_grp,
+ ttc1_wav_8_grp, ttc2_clk_0_grp, ttc2_wav_0_grp,
+ ttc2_clk_1_grp, ttc2_wav_1_grp, ttc2_clk_2_grp,
+ ttc2_wav_2_grp, ttc2_clk_3_grp, ttc2_wav_3_grp,
+ ttc2_clk_4_grp, ttc2_wav_4_grp, ttc2_clk_5_grp,
+ ttc2_wav_5_grp, ttc2_clk_6_grp, ttc2_wav_6_grp,
+ ttc2_clk_7_grp, ttc2_wav_7_grp, ttc2_clk_8_grp,
+ ttc2_wav_8_grp, ttc3_clk_0_grp, ttc3_wav_0_grp,
+ ttc3_clk_1_grp, ttc3_wav_1_grp, ttc3_clk_2_grp,
+ ttc3_wav_2_grp, ttc3_clk_3_grp, ttc3_wav_3_grp,
+ ttc3_clk_4_grp, ttc3_wav_4_grp, ttc3_clk_5_grp,
+ ttc3_wav_5_grp, ttc3_clk_6_grp, ttc3_wav_6_grp,
+ ttc3_clk_7_grp, ttc3_wav_7_grp, ttc3_clk_8_grp,
+ ttc3_wav_8_grp, swdt0_clk_0_grp, swdt0_rst_0_grp,
+ swdt0_clk_1_grp, swdt0_rst_1_grp, swdt0_clk_2_grp,
+ swdt0_rst_2_grp, swdt0_clk_3_grp, swdt0_rst_3_grp,
+ swdt0_clk_4_grp, swdt0_rst_4_grp, swdt0_clk_5_grp,
+ swdt0_rst_5_grp, swdt0_clk_6_grp, swdt0_rst_6_grp,
+ swdt0_clk_7_grp, swdt0_rst_7_grp, swdt0_clk_8_grp,
+ swdt0_rst_8_grp, swdt0_clk_9_grp, swdt0_rst_9_grp,
+ swdt0_clk_10_grp, swdt0_rst_10_grp, swdt0_clk_11_grp,
+ swdt0_rst_11_grp, swdt0_clk_12_grp, swdt0_rst_12_grp,
+ swdt1_clk_0_grp, swdt1_rst_0_grp, swdt1_clk_1_grp,
+ swdt1_rst_1_grp, swdt1_clk_2_grp, swdt1_rst_2_grp,
+ swdt1_clk_3_grp, swdt1_rst_3_grp, swdt1_clk_4_grp,
+ swdt1_rst_4_grp, swdt1_clk_5_grp, swdt1_rst_5_grp,
+ swdt1_clk_6_grp, swdt1_rst_6_grp, swdt1_clk_7_grp,
+ swdt1_rst_7_grp, swdt1_clk_8_grp, swdt1_rst_8_grp,
+ swdt1_clk_9_grp, swdt1_rst_9_grp, swdt1_clk_10_grp,
+ swdt1_rst_10_grp, swdt1_clk_11_grp, swdt1_rst_11_grp,
+ swdt1_clk_12_grp, swdt1_rst_12_grp, gpio0_0_grp,
+ gpio0_1_grp, gpio0_2_grp, gpio0_3_grp,
+ gpio0_4_grp, gpio0_5_grp, gpio0_6_grp,
+ gpio0_7_grp, gpio0_8_grp, gpio0_9_grp,
+ gpio0_10_grp, gpio0_11_grp, gpio0_12_grp,
+ gpio0_13_grp, gpio0_14_grp, gpio0_15_grp,
+ gpio0_16_grp, gpio0_17_grp, gpio0_18_grp,
+ gpio0_19_grp, gpio0_20_grp, gpio0_21_grp,
+ gpio0_22_grp, gpio0_23_grp, gpio0_24_grp,
+ gpio0_25_grp, gpio0_26_grp, gpio0_27_grp,
+ gpio0_28_grp, gpio0_29_grp, gpio0_30_grp,
+ gpio0_31_grp, gpio0_32_grp, gpio0_33_grp,
+ gpio0_34_grp, gpio0_35_grp, gpio0_36_grp,
+ gpio0_37_grp, gpio0_38_grp, gpio0_39_grp,
+ gpio0_40_grp, gpio0_41_grp, gpio0_42_grp,
+ gpio0_43_grp, gpio0_44_grp, gpio0_45_grp,
+ gpio0_46_grp, gpio0_47_grp, gpio0_48_grp,
+ gpio0_49_grp, gpio0_50_grp, gpio0_51_grp,
+ gpio0_52_grp, gpio0_53_grp, gpio0_54_grp,
+ gpio0_55_grp, gpio0_56_grp, gpio0_57_grp,
+ gpio0_58_grp, gpio0_59_grp, gpio0_60_grp,
+ gpio0_61_grp, gpio0_62_grp, gpio0_63_grp,
+ gpio0_64_grp, gpio0_65_grp, gpio0_66_grp,
+ gpio0_67_grp, gpio0_68_grp, gpio0_69_grp,
+ gpio0_70_grp, gpio0_71_grp, gpio0_72_grp,
+ gpio0_73_grp, gpio0_74_grp, gpio0_75_grp,
+ gpio0_76_grp, gpio0_77_grp, usb0_0_grp,
+ usb1_0_grp, pmu0_0_grp, pmu0_1_grp,
+ pmu0_2_grp, pmu0_3_grp, pmu0_4_grp,
+ pmu0_5_grp, pmu0_6_grp, pmu0_7_grp,
+ pmu0_8_grp, pmu0_9_grp, pmu0_10_grp,
+ pmu0_11_grp, pcie0_0_grp, pcie0_1_grp,
+ pcie0_2_grp, pcie0_3_grp, pcie0_4_grp,
+ pcie0_5_grp, pcie0_6_grp, pcie0_7_grp,
+ csu0_0_grp, csu0_1_grp, csu0_2_grp,
+ csu0_3_grp, csu0_4_grp, csu0_5_grp,
+ csu0_6_grp, csu0_7_grp, csu0_8_grp,
+ csu0_9_grp, csu0_10_grp, csu0_11_grp,
+ dpaux0_0_grp, dpaux0_1_grp, dpaux0_2_grp,
+ dpaux0_3_grp, pjtag0_0_grp, pjtag0_1_grp,
+ pjtag0_2_grp, pjtag0_3_grp, pjtag0_4_grp,
+ pjtag0_5_grp, trace0_0_grp, trace0_clk_0_grp,
+ trace0_1_grp, trace0_clk_1_grp, trace0_2_grp,
+ trace0_clk_2_grp, testscan0_0_grp]
+ maxItems: 78
+
+ function:
+ description:
+ Specify the alternative function to be configured for the
+ given pin groups.
+ enum: [ethernet0, ethernet1, ethernet2, ethernet3, gemtsu0, usb0, usb1, mdio0,
+ mdio1, mdio2, mdio3, qspi0, qspi_fbclk, qspi_ss, spi0, spi1, spi0_ss,
+ spi1_ss, sdio0, sdio0_pc, sdio0_wp, sdio0_cd, sdio1, sdio1_pc, sdio1_wp,
+ sdio1_cd, nand0, nand0_ce, nand0_rb, nand0_dqs, can0, can1, uart0, uart1,
+ i2c0, i2c1, ttc0_clk, ttc0_wav, ttc1_clk, ttc1_wav, ttc2_clk, ttc2_wav,
+ ttc3_clk, ttc3_wav, swdt0_clk, swdt0_rst, swdt1_clk, swdt1_rst, gpio0, pmu0,
+ pcie0, csu0, dpaux0, pjtag0, trace0, trace0_clk, testscan0]
+
+ required:
+ - groups
+ - function
+
+ additionalProperties: false
+
+ '^conf':
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for pin configurations,
+ which in turn use the standard properties below.
+ $ref: pincfg-node.yaml#
+
+ properties:
+ groups:
+ description:
+ List of pin groups as mentioned above.
+
+ pins:
+ description:
+ List of pin names to select in this subnode.
+ items:
+ pattern: '^MIO([0-9]|[1-6][0-9]|7[0-7])$'
+ maxItems: 78
+
+ bias-pull-up: true
+
+ bias-pull-down: true
+
+ bias-disable: true
+
+ input-schmitt-enable: true
+
+ input-schmitt-disable: true
+
+ bias-high-impedance: true
+
+ low-power-enable: true
+
+ low-power-disable: true
+
+ slew-rate:
+ enum: [0, 1]
+
+ output-enable:
+ description:
+ This will internally disable the tri-state for MIO pins.
+
+ drive-strength:
+ description:
+ Selects the drive strength for MIO pins, in mA.
+ enum: [2, 4, 8, 12]
+
+ power-source:
+ enum: [0, 1]
+
+ oneOf:
+ - required: [ groups ]
+ - required: [ pins ]
+
+ additionalProperties: false
+
+ additionalProperties: false
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+ zynqmp_firmware: zynqmp-firmware {
+ pinctrl0: pinctrl {
+ compatible = "xlnx,zynqmp-pinctrl";
+
+ pinctrl_uart1_default: uart1-default {
+ mux {
+ groups = "uart0_4_grp", "uart0_5_grp";
+ function = "uart0";
+ };
+
+ conf {
+ groups = "uart0_4_grp";
+ slew-rate = <SLEW_RATE_SLOW>;
+ power-source = <IO_STANDARD_LVCMOS18>;
+ };
+
+ conf-rx {
+ pins = "MIO18";
+ bias-pull-up;
+ };
+
+ conf-tx {
+ pins = "MIO19";
+ bias-disable;
+ input-schmitt-disable;
+ };
+ };
+ };
+ };
+
+ uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_default>;
+ };
+
+...