diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl')
20 files changed, 855 insertions, 19 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml index 4e7a456ea4..c7df4cd341 100644 --- a/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml +++ b/Documentation/devicetree/bindings/pinctrl/amlogic,meson-pinctrl-a1.yaml @@ -16,6 +16,7 @@ properties: compatible: enum: - amlogic,c3-periphs-pinctrl + - amlogic,t7-periphs-pinctrl - amlogic,meson-a1-periphs-pinctrl - amlogic,meson-s4-periphs-pinctrl diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml index 4478a76171..62890a0aea 100644 --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml @@ -24,6 +24,7 @@ patternProperties: '-pins$': type: object $ref: pinmux-node.yaml# + additionalProperties: false properties: function: @@ -37,6 +38,10 @@ patternProperties: enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio40 ] + patternProperties: + '-pins$': + $ref: '#/patternProperties/-pins$' + allOf: - $ref: pinctrl.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml index 73e1caa7c0..7cc0e16508 100644 --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml @@ -24,6 +24,7 @@ patternProperties: '-pins$': type: object $ref: pinmux-node.yaml# + unevaluatedProperties: false properties: function: @@ -36,11 +37,15 @@ patternProperties: pins: enum: [ gpio0, gpio1, gpio16, gpio17, gpio8, gpio9, gpio18, gpio19, - gpio22, gpio23, gpio30, gpio31, nand_grp, gpio35 + gpio22, gpio23, gpio30, gpio31, nand_grp, gpio35, dectpd_grp, vdsl_phy_override_0_grp, vdsl_phy_override_1_grp, vdsl_phy_override_2_grp, vdsl_phy_override_3_grp, dsl_gpio8, dsl_gpio9 ] + patternProperties: + '-pins$': + $ref: '#/patternProperties/-pins$' + allOf: - $ref: pinctrl.yaml# @@ -122,46 +127,46 @@ examples: pinctrl_nand: nand-pins { function = "nand"; - group = "nand_grp"; + pins = "nand_grp"; }; pinctrl_gpio35_alt: gpio35_alt-pins { function = "gpio35_alt"; - pin = "gpio35"; + pins = "gpio35"; }; pinctrl_dectpd: dectpd-pins { function = "dectpd"; - group = "dectpd_grp"; + pins = "dectpd_grp"; }; pinctrl_vdsl_phy_override_0: vdsl_phy_override_0-pins { function = "vdsl_phy_override_0"; - group = "vdsl_phy_override_0_grp"; + pins = "vdsl_phy_override_0_grp"; }; pinctrl_vdsl_phy_override_1: vdsl_phy_override_1-pins { function = "vdsl_phy_override_1"; - group = "vdsl_phy_override_1_grp"; + pins = "vdsl_phy_override_1_grp"; }; pinctrl_vdsl_phy_override_2: vdsl_phy_override_2-pins { function = "vdsl_phy_override_2"; - group = "vdsl_phy_override_2_grp"; + pins = "vdsl_phy_override_2_grp"; }; pinctrl_vdsl_phy_override_3: vdsl_phy_override_3-pins { function = "vdsl_phy_override_3"; - group = "vdsl_phy_override_3_grp"; + pins = "vdsl_phy_override_3_grp"; }; pinctrl_dsl_gpio8: dsl_gpio8-pins { function = "dsl_gpio8"; - group = "dsl_gpio8"; + pins = "dsl_gpio8"; }; pinctrl_dsl_gpio9: dsl_gpio9-pins { function = "dsl_gpio9"; - group = "dsl_gpio9"; + pins = "dsl_gpio9"; }; }; diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml index 2750ba42ae..f57bb34c31 100644 --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml @@ -24,6 +24,7 @@ patternProperties: '-pins$': type: object $ref: pinmux-node.yaml# + unevaluatedProperties: false properties: function: @@ -36,6 +37,10 @@ patternProperties: gpio20, gpio25, gpio26, gpio27, gpio28, hsspi_cs1, usb_port1 ] + patternProperties: + '-pins$': + $ref: '#/patternProperties/-pins$' + allOf: - $ref: pinctrl.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml index 2f6c540498..ce6fc5380c 100644 --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml @@ -24,15 +24,16 @@ patternProperties: '-pins$': type: object $ref: pinmux-node.yaml# + unevaluatedProperties: false properties: function: enum: [ ebi_cs, uart1, serial_led, legacy_led, led, spi_cs, utopia, pwm_syn_clk, sys_irq ] - pins: + groups: enum: [ ebi_cs_grp, uart1_grp, serial_led_grp, legacy_led_grp, - led_grp, spi_cs_grp, utopia_grp, pwm_syn_clk, sys_irq_grp ] + led_grp, spi_cs_grp, utopia_grp, pwm_syn_clk_grp, sys_irq_grp ] allOf: - $ref: pinctrl.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml index b3044f8057..5f7ed7d3dd 100644 --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml @@ -24,6 +24,7 @@ patternProperties: '-pins$': type: object $ref: pinmux-node.yaml# + unevaluatedProperties: false properties: function: @@ -41,6 +42,10 @@ patternProperties: gpio15, gpio16, gpio17, gpio18, gpio19, gpio20, gpio21, gpio22, gpio23, gpio24, gpio25, gpio26, gpio27, nand_grp ] + patternProperties: + '-pins$': + $ref: '#/patternProperties/-pins$' + allOf: - $ref: pinctrl.yaml# @@ -204,6 +209,6 @@ examples: pinctrl_nand: nand-pins { function = "nand"; - group = "nand_grp"; + pins = "nand_grp"; }; }; diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml index 3236871827..d549e94550 100644 --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml @@ -24,6 +24,7 @@ patternProperties: '-pins$': type: object $ref: pinmux-node.yaml# + unevaluatedProperties: false properties: function: @@ -42,6 +43,10 @@ patternProperties: gpio24, gpio25, gpio26, gpio27, gpio28, gpio29, gpio30, gpio31, uart1_grp ] + patternProperties: + '-pins$': + $ref: '#/patternProperties/-pins$' + allOf: - $ref: pinctrl.yaml# @@ -215,6 +220,6 @@ examples: pinctrl_uart1: uart1-pins { function = "uart1"; - group = "uart1_grp"; + pins = "uart1_grp"; }; }; diff --git a/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml new file mode 100644 index 0000000000..3e84728988 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml @@ -0,0 +1,217 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nuvoton,npcm845-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton NPCM845 Pin Controller and GPIO + +maintainers: + - Tomer Maimon <tmaimon77@gmail.com> + +description: + The Nuvoton BMC NPCM8XX Pin Controller multi-function routed through + the multiplexing block, Each pin supports GPIO functionality (GPIOx) + and multiple functions that directly connect the pin to different + hardware blocks. + +properties: + compatible: + const: nuvoton,npcm845-pinctrl + + ranges: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + nuvoton,sysgcr: + $ref: /schemas/types.yaml#/definitions/phandle + description: a phandle to access GCR registers. + +patternProperties: + '^gpio@': + type: object + additionalProperties: false + + description: + Eight GPIO banks that each contain 32 GPIOs. + + properties: + gpio-controller: true + + '#gpio-cells': + const: 2 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-ranges: + maxItems: 1 + + required: + - gpio-controller + - '#gpio-cells' + - reg + - interrupts + - gpio-ranges + + '-mux$': + $ref: pinmux-node.yaml# + + properties: + groups: + description: + One or more groups of pins to mux to a certain function + items: + enum: [ iox1, iox2, smb1d, smb2d, lkgpo1, lkgpo2, ioxh, gspi, + smb5b, smb5c, lkgpo0, pspi, jm1, jm2, smb4den, smb4b, + smb4c, smb15, smb16, smb17, smb18, smb19, smb20, smb21, + smb22, smb23, smb23b, smb4d, smb14, smb5, smb4, smb3, + spi0cs1, spi0cs2, spi0cs3, spi1cs0, spi1cs1, spi1cs2, + spi1cs3, spi1cs23, smb3c, smb3b, bmcuart0a, uart1, jtag2, + bmcuart1, uart2, sg1mdio, bmcuart0b, r1err, r1md, r1oen, + r2oen, rmii3, r3oen, smb3d, fanin0, fanin1, fanin2, fanin3, + fanin4, fanin5, fanin6, fanin7, fanin8, fanin9, fanin10, + fanin11, fanin12, fanin13, fanin14, fanin15, pwm0, pwm1, pwm2, + pwm3, r2, r2err, r2md, r3rxer, ga20kbc, smb5d, lpc, espi, rg2, + ddr, i3c0, i3c1, i3c2, i3c3, i3c4, i3c5, smb0, smb1, smb2, + smb2c, smb2b, smb1c, smb1b, smb8, smb9, smb10, smb11, sd1, + sd1pwr, pwm4, pwm5, pwm6, pwm7, pwm8, pwm9, pwm10, pwm11, + mmc8, mmc, mmcwp, mmccd, mmcrst, clkout, serirq, lpcclk, + scipme, smi, smb6, smb7, spi1, faninx, r1, spi3, spi3cs1, + spi3quad, spi3cs2, spi3cs3, nprd_smi, smb0b, smb0c, smb0den, + smb0d, ddc, rg2mdio, wdog1, wdog2, smb12, smb13, spix, + spixcs1, clkreq, hgpio0, hgpio1, hgpio2, hgpio3, hgpio4, + hgpio5, hgpio6, hgpio7 ] + + function: + description: + The function that a group of pins is muxed to + enum: [ iox1, iox2, smb1d, smb2d, lkgpo1, lkgpo2, ioxh, gspi, + smb5b, smb5c, lkgpo0, pspi, jm1, jm2, smb4den, smb4b, + smb4c, smb15, smb16, smb17, smb18, smb19, smb20, smb21, + smb22, smb23, smb23b, smb4d, smb14, smb5, smb4, smb3, + spi0cs1, spi0cs2, spi0cs3, spi1cs0, spi1cs1, spi1cs2, + spi1cs3, spi1cs23, smb3c, smb3b, bmcuart0a, uart1, jtag2, + bmcuart1, uart2, sg1mdio, bmcuart0b, r1err, r1md, r1oen, + r2oen, rmii3, r3oen, smb3d, fanin0, fanin1, fanin2, fanin3, + fanin4, fanin5, fanin6, fanin7, fanin8, fanin9, fanin10, + fanin11, fanin12, fanin13, fanin14, fanin15, pwm0, pwm1, pwm2, + pwm3, r2, r2err, r2md, r3rxer, ga20kbc, smb5d, lpc, espi, rg2, + ddr, i3c0, i3c1, i3c2, i3c3, i3c4, i3c5, smb0, smb1, smb2, + smb2c, smb2b, smb1c, smb1b, smb8, smb9, smb10, smb11, sd1, + sd1pwr, pwm4, pwm5, pwm6, pwm7, pwm8, pwm9, pwm10, pwm11, + mmc8, mmc, mmcwp, mmccd, mmcrst, clkout, serirq, lpcclk, + scipme, smi, smb6, smb7, spi1, faninx, r1, spi3, spi3cs1, + spi3quad, spi3cs2, spi3cs3, nprd_smi, smb0b, smb0c, smb0den, + smb0d, ddc, rg2mdio, wdog1, wdog2, smb12, smb13, spix, + spixcs1, clkreq, hgpio0, hgpio1, hgpio2, hgpio3, hgpio4, + hgpio5, hgpio6, hgpio7 ] + + dependencies: + groups: [ function ] + function: [ groups ] + + additionalProperties: false + + '^pin': + $ref: pincfg-node.yaml# + + properties: + pins: + description: + A list of pins to configure in certain ways, such as enabling + debouncing + items: + pattern: '^GPIO([0-9]|[0-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-6])' + + bias-disable: true + + bias-pull-up: true + + bias-pull-down: true + + input-enable: true + + output-low: true + + output-high: true + + drive-push-pull: true + + drive-open-drain: true + + input-debounce: + description: + Debouncing periods in microseconds, one period per interrupt + bank found in the controller + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 4 + + slew-rate: + description: | + 0: Low rate + 1: High rate + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + + drive-strength: + enum: [ 0, 1, 2, 4, 8, 12 ] + + additionalProperties: false + +allOf: + - $ref: pinctrl.yaml# + +required: + - compatible + - ranges + - '#address-cells' + - '#size-cells' + - nuvoton,sysgcr + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/gpio/gpio.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pinctrl: pinctrl@f0010000 { + compatible = "nuvoton,npcm845-pinctrl"; + ranges = <0x0 0x0 0xf0010000 0x8000>; + #address-cells = <1>; + #size-cells = <1>; + nuvoton,sysgcr = <&gcr>; + + gpio0: gpio@0 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x0 0xb0>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&pinctrl 0 0 32>; + }; + + fanin0_pin: fanin0-mux { + groups = "fanin0"; + function = "fanin0"; + }; + + pin34_slew: pin34-slew { + pins = "GPIO34/I3C4_SDA"; + bias-disable; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml index d49aafd8c5..a24286e4de 100644 --- a/Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/nxp,s32g2-siul2-pinctrl.yaml @@ -9,7 +9,7 @@ title: NXP S32G2 pin controller maintainers: - Ghennadi Procopciuc <Ghennadi.Procopciuc@oss.nxp.com> - - Chester Lin <clin@suse.com> + - Chester Lin <chester62515@gmail.com> description: | S32G2 pinmux is implemented in SIUL2 (System Integration Unit Lite2), diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml index 2aedb7e7bc..5ece3b9d67 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-tlmm.yaml @@ -43,7 +43,8 @@ patternProperties: "-state$": oneOf: - $ref: "#/$defs/qcom-mdm9607-tlmm-state" - - patternProperties: + - additionalProperties: false + patternProperties: ".*": $ref: "#/$defs/qcom-mdm9607-tlmm-state" diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml index 9efb765095..a602bf0d27 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml @@ -67,8 +67,8 @@ $defs: Specify the alternative function to be configured for the specified pins. Functions are only valid for gpio pins. enum: [ gpio, cci_i2c0, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim5, - blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5, blsp_spi1, - blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2, + blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5, blsp_i2c6, + blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2, blsp_uart3, blsp_uart4, blsp_uart5, cam_mclk0, cam_mclk1, gp0_clk, gp1_clk, sdc3, wlan ] diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml index e119a226a4..2173c52556 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sa8775p-tlmm.yaml @@ -28,6 +28,7 @@ properties: gpio-controller: true "#gpio-cells": true gpio-ranges: true + wakeup-parent: true gpio-reserved-ranges: minItems: 1 diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml index 368d44ff54..c8735ab97e 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-pinctrl.yaml @@ -41,6 +41,10 @@ properties: gpio-ranges: maxItems: 1 + gpio-reserved-ranges: + minItems: 1 + maxItems: 88 + gpio-line-names: maxItems: 175 diff --git a/Documentation/devicetree/bindings/pinctrl/realtek,rtd1315e-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1315e-pinctrl.yaml new file mode 100644 index 0000000000..fc6c65fea7 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1315e-pinctrl.yaml @@ -0,0 +1,188 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2023 Realtek Semiconductor Corporation +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/realtek,rtd1315e-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek DHC RTD1315E Pin Controller + +maintainers: + - TY Chang <tychang@realtek.com> + +description: + The Realtek DHC RTD1315E is a high-definition media processor SoC. The + RTD1315E pin controller is used to control pin function, pull up/down + resistor, drive strength, schmitt trigger and power source. + +properties: + compatible: + const: realtek,rtd1315e-pinctrl + + reg: + maxItems: 1 + +patternProperties: + '-pins$': + type: object + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + properties: + pins: + items: + enum: [ gpio_0, gpio_1, emmc_rst_n, emmc_dd_sb, emmc_clk, emmc_cmd, + gpio_6, gpio_7, gpio_8, gpio_9, gpio_10, gpio_11, gpio_12, + gpio_13, gpio_14, gpio_15, gpio_16, gpio_17, gpio_18, gpio_19, + gpio_20, emmc_data_0, emmc_data_1, emmc_data_2, usb_cc2, gpio_25, + gpio_26, gpio_27, gpio_28, gpio_29, gpio_30, gpio_31, gpio_32, + gpio_33, gpio_34, gpio_35, hif_data, hif_en, hif_rdy, hif_clk, + gpio_dummy_40, gpio_dummy_41, gpio_dummy_42, gpio_dummy_43, + gpio_dummy_44, gpio_dummy_45, gpio_46, gpio_47, gpio_48, gpio_49, + gpio_50, usb_cc1, emmc_data_3, emmc_data_4, ir_rx, ur0_rx, ur0_tx, + gpio_57, gpio_58, gpio_59, gpio_60, gpio_61, gpio_62, gpio_dummy_63, + gpio_dummy_64, gpio_dummy_65, gpio_66, gpio_67, gpio_68, gpio_69, + gpio_70, gpio_71, gpio_72, gpio_dummy_73, emmc_data_5, emmc_data_6, + emmc_data_7, gpio_dummy_77, gpio_78, gpio_79, gpio_80, gpio_81, + ur2_loc, gspi_loc, hi_width, sf_en, arm_trace_dbg_en, + ejtag_aucpu_loc, ejtag_acpu_loc, ejtag_vcpu_loc, ejtag_scpu_loc, + dmic_loc, vtc_dmic_loc, vtc_tdm_loc, vtc_i2si_loc, tdm_ai_loc, + ai_loc, spdif_loc, hif_en_loc, scan_switch, wd_rset, boot_sel, + reset_n, testmode ] + + function: + enum: [ gpio, nf, emmc, ao, gspi_loc0, gspi_loc1, uart0, uart1, + uart2_loc0, uart2_loc1, i2c0, i2c1, i2c4, i2c5, pcie1, + etn_led, etn_phy, spi, pwm0_loc0, pwm0_loc1, pwm1_loc0, + pwm1_loc1, pwm2_loc0, pwm2_loc1, pwm3_loc0, pwm3_loc1, + spdif_optical_loc0, spdif_optical_loc1, usb_cc1, usb_cc2, + sd, dmic_loc0, dmic_loc1, ai_loc0, ai_loc1, tdm_ai_loc0, + tdm_ai_loc1, hi_loc0, hi_m, vtc_i2so, vtc_i2si_loc0, + vtc_i2si_loc1, vtc_dmic_loc0, vtc_dmic_loc1, vtc_tdm_loc0, + vtc_tdm_loc1, dc_fan, pll_test_loc0, pll_test_loc1, + ir_rx, uart2_disable, gspi_disable, hi_width_disable, + hi_width_1bit, sf_disable, sf_enable, scpu_ejtag_loc0, + scpu_ejtag_loc1, scpu_ejtag_loc2, scpu_ejtag_loc3, + acpu_ejtag_loc0, acpu_ejtag_loc1, acpu_ejtag_loc2, + vcpu_ejtag_loc0, vcpu_ejtag_loc1, vcpu_ejtag_loc2, + aucpu_ejtag_loc0, aucpu_ejtag_loc1, aucpu_ejtag_loc2, + gpu_ejtag, iso_tristate, dbg_out0, dbg_out1, standby_dbg, + spdif, arm_trace_debug_disable, arm_trace_debug_enable, + aucpu_ejtag_disable, acpu_ejtag_disable, vcpu_ejtag_disable, + scpu_ejtag_disable, vtc_dmic_loc_disable, vtc_tdm_disable, + vtc_i2si_disable, tdm_ai_disable, ai_disable, spdif_disable, + hif_disable, hif_enable, test_loop, pmic_pwrup ] + + drive-strength: + enum: [4, 8] + + bias-pull-down: true + + bias-pull-up: true + + bias-disable: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + drive-push-pull: true + + power-source: + description: | + Valid arguments are described as below: + 0: power supply of 1.8V + 1: power supply of 3.3V + enum: [0, 1] + + realtek,drive-strength-p: + description: | + Some of pins can be driven using the P-MOS and N-MOS transistor to + achieve finer adjustments. The block-diagram representation is as + follows: + VDD + | + ||--+ + +-----o|| P-MOS-FET + | ||--+ + IN --+ +----- out + | ||--+ + +------|| N-MOS-FET + ||--+ + | + GND + The driving strength of the P-MOS/N-MOS transistors impacts the + waveform's rise/fall times. Greater driving strength results in + shorter rise/fall times. Each P-MOS and N-MOS transistor offers + 8 configurable levels (0 to 7), with higher values indicating + greater driving strength, contributing to achieving the desired + speed. + + The realtek,drive-strength-p is used to control the driving strength + of the P-MOS output. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + + realtek,drive-strength-n: + description: | + Similar to the realtek,drive-strength-p, the realtek,drive-strength-n + is used to control the driving strength of the N-MOS output. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + + realtek,duty-cycle: + description: | + An integer describing the level to adjust output duty cycle, controlling + the proportion of positive and negative waveforms in nanoseconds. + Valid arguments are described as below: + 0: 0ns + 2: + 0.25ns + 3: + 0.5ns + 4: -0.25ns + 5: -0.5ns + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 2, 3, 4, 5 ] + + required: + - pins + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pinctrl@4e000 { + compatible = "realtek,rtd1315e-pinctrl"; + reg = <0x4e000 0x130>; + + emmc-hs200-pins { + pins = "emmc_clk", + "emmc_cmd", + "emmc_data_0", + "emmc_data_1", + "emmc_data_2", + "emmc_data_3", + "emmc_data_4", + "emmc_data_5", + "emmc_data_6", + "emmc_data_7"; + function = "emmc"; + realtek,drive-strength-p = <0x2>; + realtek,drive-strength-n = <0x2>; + }; + + i2c-0-pins { + pins = "gpio_12", + "gpio_13"; + function = "i2c0"; + drive-strength = <4>; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/realtek,rtd1319d-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1319d-pinctrl.yaml new file mode 100644 index 0000000000..f07361d60a --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1319d-pinctrl.yaml @@ -0,0 +1,187 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2023 Realtek Semiconductor Corporation +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/realtek,rtd1319d-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek DHC RTD1319D Pin Controller + +maintainers: + - TY Chang <tychang@realtek.com> + +description: + The Realtek DHC RTD1319D is a high-definition media processor SoC. The + RTD1319D pin controller is used to control pin function, pull up/down + resistor, drive strength, schmitt trigger and power source. + +properties: + compatible: + const: realtek,rtd1319d-pinctrl + + reg: + maxItems: 1 + +patternProperties: + '-pins$': + type: object + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + properties: + pins: + items: + enum: [ gpio_0, gpio_1, gpio_2, gpio_3, gpio_4, gpio_5, gpio_6, gpio_7, + gpio_8, gpio_9, gpio_10, gpio_11, gpio_12, gpio_13, gpio_14, + gpio_15, gpio_16, gpio_17, gpio_18, gpio_19, gpio_20, gpio_21, + gpio_22, gpio_23, usb_cc2, gpio_25, gpio_26, gpio_27, gpio_28, + gpio_29, gpio_30, gpio_31, gpio_32, gpio_33, gpio_34, gpio_35, + hif_data, hif_en, hif_rdy, hif_clk, gpio_40, gpio_41, gpio_42, + gpio_43, gpio_44, gpio_45, gpio_46, gpio_47, gpio_48, gpio_49, + gpio_50, usb_cc1, gpio_52, gpio_53, ir_rx, ur0_rx, ur0_tx, + gpio_57, gpio_58, gpio_59, gpio_60, gpio_61, gpio_62, gpio_63, + gpio_64, emmc_rst_n, emmc_dd_sb, emmc_clk, emmc_cmd, emmc_data_0, + emmc_data_1, emmc_data_2, emmc_data_3, emmc_data_4, emmc_data_5, + emmc_data_6, emmc_data_7, dummy, gpio_78, gpio_79, gpio_80, + gpio_81, ur2_loc, gspi_loc, hi_width, sf_en, arm_trace_dbg_en, + ejtag_aucpu_loc, ejtag_acpu_loc, ejtag_vcpu_loc, ejtag_scpu_loc, + dmic_loc, ejtag_secpu_loc, vtc_dmic_loc, vtc_tdm_loc, vtc_i2si_loc, + tdm_ai_loc, ai_loc, spdif_loc, hif_en_loc, sc0_loc, sc1_loc, + scan_switch, wd_rset, boot_sel, reset_n, testmode ] + + function: + enum: [ gpio, nf, emmc, tp0, tp1, sc0, sc0_data0, sc0_data1, sc0_data2, + sc1, sc1_data0, sc1_data1, sc1_data2, ao, gspi_loc0, gspi_loc1, + uart0, uart1, uart2_loc0, uart2_loc1, i2c0, i2c1, i2c3, i2c4, + i2c5, pcie1, sdio, etn_led, etn_phy, spi, pwm0_loc0, pwm0_loc1, + pwm1_loc0, pwm1_loc1, pwm2_loc0, pwm2_loc1, pwm3_loc0, pwm3_loc1, + qam_agc_if0, qam_agc_if1, spdif_optical_loc0, spdif_optical_loc1, + usb_cc1, usb_cc2, vfd, sd, dmic_loc0, dmic_loc1, ai_loc0, ai_loc1, + tdm_ai_loc0, tdm_ai_loc1, hi_loc0, hi_m, vtc_i2so, vtc_i2si_loc0, + vtc_i2si_loc1, vtc_dmic_loc0, vtc_dmic_loc1, vtc_tdm_loc0, + vtc_tdm_loc1, dc_fan, pll_test_loc0, pll_test_loc1, ir_rx, + uart2_disable, gspi_disable, hi_width_disable, hi_width_1bit, + sf_disable, sf_enable, scpu_ejtag_loc0, scpu_ejtag_loc1, + scpu_ejtag_loc2, acpu_ejtag_loc0, acpu_ejtag_loc1, acpu_ejtag_loc2, + vcpu_ejtag_loc0, vcpu_ejtag_loc1, vcpu_ejtag_loc2, secpu_ejtag_loc0, + secpu_ejtag_loc1, secpu_ejtag_loc2, aucpu_ejtag_loc0, aucpu_ejtag_loc1, + aucpu_ejtag_loc2, iso_tristate, dbg_out0, dbg_out1, standby_dbg, + spdif, arm_trace_debug_disable, arm_trace_debug_enable, + aucpu_ejtag_disable, acpu_ejtag_disable, vcpu_ejtag_disable, + scpu_ejtag_disable, secpu_ejtag_disable, vtc_dmic_loc_disable, + vtc_tdm_disable, vtc_i2si_disable, tdm_ai_disable, ai_disable, + spdif_disable, hif_disable, hif_enable, test_loop, pmic_pwrup ] + + drive-strength: + enum: [4, 8] + + bias-pull-down: true + + bias-pull-up: true + + bias-disable: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + drive-push-pull: true + + power-source: + description: | + Valid arguments are described as below: + 0: power supply of 1.8V + 1: power supply of 3.3V + enum: [0, 1] + + realtek,drive-strength-p: + description: | + Some of pins can be driven using the P-MOS and N-MOS transistor to + achieve finer adjustments. The block-diagram representation is as + follows: + VDD + | + ||--+ + +-----o|| P-MOS-FET + | ||--+ + IN --+ +----- out + | ||--+ + +------|| N-MOS-FET + ||--+ + | + GND + The driving strength of the P-MOS/N-MOS transistors impacts the + waveform's rise/fall times. Greater driving strength results in + shorter rise/fall times. Each P-MOS and N-MOS transistor offers + 8 configurable levels (0 to 7), with higher values indicating + greater driving strength, contributing to achieving the desired + speed. + + The realtek,drive-strength-p is used to control the driving strength + of the P-MOS output. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + + realtek,drive-strength-n: + description: | + Similar to the realtek,drive-strength-p, the realtek,drive-strength-n + is used to control the driving strength of the N-MOS output. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + + realtek,duty-cycle: + description: | + An integer describing the level to adjust output duty cycle, controlling + the proportion of positive and negative waveforms in nanoseconds. + Valid arguments are described as below: + 0: 0ns + 2: + 0.25ns + 3: + 0.5ns + 4: -0.25ns + 5: -0.5ns + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 2, 3, 4, 5 ] + + required: + - pins + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pinctrl@4e000 { + compatible = "realtek,rtd1319d-pinctrl"; + reg = <0x4e000 0x130>; + + emmc-hs200-pins { + pins = "emmc_clk", + "emmc_cmd", + "emmc_data_0", + "emmc_data_1", + "emmc_data_2", + "emmc_data_3", + "emmc_data_4", + "emmc_data_5", + "emmc_data_6", + "emmc_data_7"; + function = "emmc"; + realtek,drive-strength-p = <0x2>; + realtek,drive-strength-n = <0x2>; + }; + + i2c-0-pins { + pins = "gpio_12", + "gpio_13"; + function = "i2c0"; + drive-strength = <4>; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/realtek,rtd1619b-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1619b-pinctrl.yaml new file mode 100644 index 0000000000..671e4ec846 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1619b-pinctrl.yaml @@ -0,0 +1,186 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2023 Realtek Semiconductor Corporation +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/realtek,rtd1619b-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek DHC RTD1619B Pin Controller + +maintainers: + - TY Chang <tychang@realtek.com> + +description: + The Realtek DHC RTD1619B is a high-definition media processor SoC. The + RTD1619B pin controller is used to control pin function, pull up/down + resistor, drive strength, schmitt trigger and power source. + +properties: + compatible: + const: realtek,rtd1619b-pinctrl + + reg: + maxItems: 1 + +patternProperties: + '-pins$': + type: object + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + properties: + pins: + items: + enum: [ gpio_0, gpio_1, gpio_2, gpio_3, gpio_4, gpio_5, gpio_6, gpio_7, + gpio_8, gpio_9, gpio_10, gpio_11, gpio_12, gpio_13, gpio_14, + gpio_15, gpio_16, gpio_17, gpio_18, gpio_19, gpio_20, gpio_21, + gpio_22, gpio_23, usb_cc2, gpio_25, gpio_26, gpio_27, gpio_28, + gpio_29, gpio_30, gpio_31, gpio_32, gpio_33, gpio_34, gpio_35, + hif_data, hif_en, hif_rdy, hif_clk, gpio_40, gpio_41, gpio_42, + gpio_43, gpio_44, gpio_45, gpio_46, gpio_47, gpio_48, gpio_49, + gpio_50, usb_cc1, gpio_52, gpio_53, ir_rx, ur0_rx, ur0_tx, + gpio_57, gpio_58, gpio_59, gpio_60, gpio_61, gpio_62, gpio_63, + gpio_64, gpio_65, gpio_66, gpio_67, gpio_68, gpio_69, gpio_70, + gpio_71, gpio_72, gpio_73, gpio_74, gpio_75, gpio_76, emmc_cmd, + spi_ce_n, spi_sck, spi_so, spi_si, emmc_rst_n, emmc_dd_sb, + emmc_clk, emmc_data_0, emmc_data_1, emmc_data_2, emmc_data_3, + emmc_data_4, emmc_data_5, emmc_data_6, emmc_data_7, ur2_loc, + gspi_loc, sdio_loc, hi_loc, hi_width, sf_en, arm_trace_dbg_en, + pwm_01_open_drain_en_loc0, pwm_23_open_drain_en_loc0, + pwm_01_open_drain_en_loc1, pwm_23_open_drain_en_loc1, + ejtag_acpu_loc, ejtag_vcpu_loc, ejtag_scpu_loc, dmic_loc, + iso_gspi_loc, ejtag_ve3_loc, ejtag_aucpu0_loc, ejtag_aucpu1_loc ] + + function: + enum: [ gpio, nf, nf_spi, spi, pmic, spdif, spdif_coaxial, spdif_optical_loc0, + spdif_optical_loc1, emmc_spi, emmc, sc1, uart0, uart1, uart2_loc0, uart2_loc1, + gspi_loc1, iso_gspi_loc1, i2c0, i2c1, i2c3, i2c4, i2c5, pwm0, pwm1, pwm2, + pwm3, etn_led, etn_phy, etn_clk, sc0, vfd, gspi_loc0, iso_gspi_loc0, pcie1, + pcie2, sd, sdio_loc0, sdio_loc1, hi, hi_m, dc_fan, pll_test_loc0, pll_test_loc1, + usb_cc1, usb_cc2, ir_rx, tdm_ai_loc0, tdm_ai_loc1, dmic_loc0, dmic_loc1, + ai_loc0, ai_loc1, tp0, tp1, ao, uart2_disable, gspi_disable, sdio_disable, + hi_loc_disable, hi_loc0, hi_width_disable, hi_width_1bit, vtc_i2si_loc0, + vtc_tdm_loc0, vtc_dmic_loc0, vtc_i2si_loc1, vtc_tdm_loc1, vtc_dmic_loc1, + vtc_i2so, ve3_ejtag_loc0, aucpu0_ejtag_loc0, aucpu1_ejtag_loc0, ve3_ejtag_loc1, + aucpu0_ejtag_loc1, aucpu1_ejtag_loc1, ve3_ejtag_loc2, aucpu0_ejtag_loc2, + aucpu1_ejtag_loc2, scpu_ejtag_loc0, acpu_ejtag_loc0, vcpu_ejtag_loc0, + scpu_ejtag_loc1, acpu_ejtag_loc1, vcpu_ejtag_loc1, scpu_ejtag_loc2, + acpu_ejtag_loc2, vcpu_ejtag_loc2, ve3_ejtag_disable, aucpu0_ejtag_disable, + aucpu1_ejtag_disable, acpu_ejtag_disable, vcpu_ejtag_disable, + scpu_ejtag_disable, iso_gspi_disable, sf_disable, sf_enable, + arm_trace_debug_disable, arm_trace_debug_enable, pwm_normal, pwm_open_drain, + standby_dbg, test_loop_dis ] + + drive-strength: + enum: [4, 8] + + bias-pull-down: true + + bias-pull-up: true + + bias-disable: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + drive-push-pull: true + + power-source: + description: | + Valid arguments are described as below: + 0: power supply of 1.8V + 1: power supply of 3.3V + enum: [0, 1] + + realtek,drive-strength-p: + description: | + Some of pins can be driven using the P-MOS and N-MOS transistor to + achieve finer adjustments. The block-diagram representation is as + follows: + VDD + | + ||--+ + +-----o|| P-MOS-FET + | ||--+ + IN --+ +----- out + | ||--+ + +------|| N-MOS-FET + ||--+ + | + GND + The driving strength of the P-MOS/N-MOS transistors impacts the + waveform's rise/fall times. Greater driving strength results in + shorter rise/fall times. Each P-MOS and N-MOS transistor offers + 8 configurable levels (0 to 7), with higher values indicating + greater driving strength, contributing to achieving the desired + speed. + + The realtek,drive-strength-p is used to control the driving strength + of the P-MOS output. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + + realtek,drive-strength-n: + description: | + Similar to the realtek,drive-strength-p, the realtek,drive-strength-n + is used to control the driving strength of the N-MOS output. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + + realtek,duty-cycle: + description: | + An integer describing the level to adjust output duty cycle, controlling + the proportion of positive and negative waveforms in nanoseconds. + Valid arguments are described as below: + 0: 0ns + 2: + 0.25ns + 3: + 0.5ns + 4: -0.25ns + 5: -0.5ns + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 2, 3, 4, 5 ] + + required: + - pins + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pinctrl@4e000 { + compatible = "realtek,rtd1619b-pinctrl"; + reg = <0x4e000 0x130>; + + emmc-hs200-pins { + pins = "emmc_clk", + "emmc_cmd", + "emmc_data_0", + "emmc_data_1", + "emmc_data_2", + "emmc_data_3", + "emmc_data_4", + "emmc_data_5", + "emmc_data_6", + "emmc_data_7"; + function = "emmc"; + realtek,drive-strength-p = <0x2>; + realtek,drive-strength-n = <0x2>; + }; + + i2c-0-pins { + pins = "gpio_12", + "gpio_13"; + function = "i2c0"; + drive-strength = <4>; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml index 145c5442f2..b5ca40d0e2 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml @@ -25,6 +25,7 @@ properties: - enum: - renesas,r9a07g043-pinctrl # RZ/G2UL{Type-1,Type-2} and RZ/Five - renesas,r9a07g044-pinctrl # RZ/G2{L,LC} + - renesas,r9a08g045-pinctrl # RZ/G3S - items: - enum: @@ -73,10 +74,26 @@ properties: additionalProperties: anyOf: - type: object + additionalProperties: false allOf: - $ref: pincfg-node.yaml# - $ref: pinmux-node.yaml# + - if: + properties: + compatible: + contains: + enum: + - renesas,r9a08g045-pinctrl + then: + properties: + drive-strength: false + output-impedance-ohms: false + slew-rate: false + else: + properties: + drive-strength-microamp: false + description: Pin controller client devices use pin configuration subnodes (children and grandchildren) for desired pin configuration. @@ -91,6 +108,10 @@ additionalProperties: pins: true drive-strength: enum: [ 2, 4, 8, 12 ] + drive-strength-microamp: + enum: [ 1900, 2200, 4000, 4400, 4500, 4700, 5200, 5300, 5700, + 5800, 6000, 6050, 6100, 6550, 6800, 7000, 8000, 9000, + 10000 ] output-impedance-ohms: enum: [ 33, 50, 66, 100 ] power-source: diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml index cb81a17bd0..5fa5d31f88 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzv2m-pinctrl.yaml @@ -53,6 +53,7 @@ properties: additionalProperties: anyOf: - type: object + additionalProperties: false allOf: - $ref: pincfg-node.yaml# - $ref: pinmux-node.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml index 10c335efe6..20e806dce1 100644 --- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml @@ -115,6 +115,8 @@ additionalProperties: type: object additionalProperties: type: object + additionalProperties: false + properties: rockchip,pins: $ref: /schemas/types.yaml#/definitions/uint32-matrix diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml index 2120ef71a7..e1eb45a9ed 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml @@ -48,7 +48,8 @@ properties: description: Phandle+args to the syscon node which includes IRQ mux selection. $ref: /schemas/types.yaml#/definitions/phandle-array items: - - items: + - minItems: 2 + items: - description: syscon node which includes IRQ mux selection - description: The offset of the IRQ mux selection register - description: The field mask of IRQ mux, needed if different of 0xf |