1 files changed, 144 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
new file mode 100644
index 0000000000..5e460128b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/qcom,pon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PON Device
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description: |
+  The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey
+  and resin along with the Android reboot-mode.
+
+  This DT node has pwrkey and resin as sub nodes.
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8916-pon
+      - qcom,pm8941-pon
+      - qcom,pms405-pon
+      - qcom,pm8998-pon
+      - qcom,pmk8350-pon
+
+  reg:
+    description: |
+      Specifies the SPMI base address for the PON (power-on) peripheral.  For
+      PMICs that have the PON peripheral (GEN3) split into PON_HLOS and PON_PBS
+      (e.g. PMK8350), this can hold addresses of both PON_HLOS and PON_PBS
+      peripherals.  In that case, the PON_PBS address needs to be specified to
+      facilitate software debouncing on some PMIC.
+    minItems: 1
+    maxItems: 2
+
+  reg-names:
+    minItems: 1
+    maxItems: 2
+
+  pwrkey:
+    type: object
+    $ref: /schemas/input/qcom,pm8941-pwrkey.yaml#
+
+  resin:
+    type: object
+    $ref: /schemas/input/qcom,pm8941-pwrkey.yaml#
+
+  watchdog:
+    type: object
+    $ref: /schemas/watchdog/qcom,pm8916-wdt.yaml
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pm8916-pon
+              - qcom,pms405-pon
+              - qcom,pm8998-pon
+    then:
+      allOf:
+        - $ref: reboot-mode.yaml#
+
+      properties:
+        reg:
+          maxItems: 1
+        reg-names:
+          items:
+            - const: pon
+
+    # Special case for pm8941, which doesn't store reset mode
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,pm8941-pon
+    then:
+      properties:
+        reg:
+          maxItems: 1
+        reg-names:
+          items:
+            - const: pon
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,pmk8350-pon
+    then:
+      properties:
+        reg:
+          minItems: 1
+          maxItems: 2
+        reg-names:
+          minItems: 1
+          items:
+            - const: hlos
+            - const: pbs
+
+examples:
+  - |
+   #include <dt-bindings/interrupt-controller/irq.h>
+   #include <dt-bindings/input/linux-event-codes.h>
+   #include <dt-bindings/spmi/spmi.h>
+   spmi_bus: spmi@c440000 {
+     reg = <0x0c440000 0x1100>;
+     #address-cells = <2>;
+     #size-cells = <0>;
+     pmk8350: pmic@0 {
+       reg = <0x0 SPMI_USID>;
+       #address-cells = <1>;
+       #size-cells = <0>;
+       pmk8350_pon: pon_hlos@1300 {
+         reg = <0x1300>;
+         compatible = "qcom,pm8998-pon";
+
+         pwrkey {
+            compatible = "qcom,pm8941-pwrkey";
+            interrupts = < 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH >;
+            debounce = <15625>;
+            bias-pull-up;
+            linux,code = <KEY_POWER>;
+         };
+
+         resin {
+            compatible = "qcom,pm8941-resin";
+            interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+            debounce = <15625>;
+            bias-pull-up;
+            linux,code = <KEY_VOLUMEDOWN>;
+         };
+       };
+     };
+   };
+...