summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/reset/st,stih407-picophyreset.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/reset/st,stih407-picophyreset.yaml')
-rw-r--r--Documentation/devicetree/bindings/reset/st,stih407-picophyreset.yaml47
1 files changed, 47 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/reset/st,stih407-picophyreset.yaml b/Documentation/devicetree/bindings/reset/st,stih407-picophyreset.yaml
new file mode 100644
index 000000000..329ae4ae1
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/st,stih407-picophyreset.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/st,stih407-picophyreset.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STi family Sysconfig Picophy SoftReset Controller
+
+maintainers:
+ - Peter Griffin <peter.griffin@linaro.org>
+
+description: |
+ This binding describes a reset controller device that is used to enable and
+ disable on-chip PicoPHY USB2 phy(s) using "softreset" control bits found in
+ the STi family SoC system configuration registers.
+
+ The actual action taken when softreset is asserted is hardware dependent.
+ However, when asserted it may not be possible to access the hardware's
+ registers and after an assert/deassert sequence the hardware's previous state
+ may no longer be valid.
+
+properties:
+ compatible:
+ const: st,stih407-picophyreset
+
+ '#reset-cells':
+ const: 1
+
+required:
+ - compatible
+ - '#reset-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/reset/stih407-resets.h>
+
+ picophyreset: picophyreset-controller {
+ compatible = "st,stih407-picophyreset";
+ #reset-cells = <1>;
+ };
+
+ // Specifying picophyreset control of devices
+ usb2_picophy0: usbpicophy {
+ resets = <&picophyreset STIH407_PICOPHY0_RESET>;
+ };