diff options
Diffstat (limited to 'Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt')
-rw-r--r-- | Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt | 34 |
1 files changed, 0 insertions, 34 deletions
diff --git a/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt b/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt deleted file mode 100644 index 0dc121b6ea..0000000000 --- a/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt +++ /dev/null @@ -1,34 +0,0 @@ -* STMicroelectronics SAS. ST33ZP24 TPM SoC - -Required properties: -- compatible: Should be "st,st33zp24-i2c". -- clock-frequency: I²C work frequency. -- reg: address on the bus - -Optional ST33ZP24 Properties: -- interrupts: GPIO interrupt to which the chip is connected -- lpcpd-gpios: Output GPIO pin used for ST33ZP24 power management D1/D2 state. -If set, power must be present when the platform is going into sleep/hibernate mode. - -Optional SoC Specific Properties: -- pinctrl-names: Contains only one value - "default". -- pintctrl-0: Specifies the pin control groups used for this controller. - -Example (for ARM-based BeagleBoard xM with ST33ZP24 on I2C2): - -&i2c2 { - - - st33zp24: st33zp24@13 { - - compatible = "st,st33zp24-i2c"; - - reg = <0x13>; - clock-frequency = <400000>; - - interrupt-parent = <&gpio5>; - interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; - - lpcpd-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>; - }; -}; |