1 files changed, 148 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
new file mode 100644
index 0000000000..a06ac21774
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mediatek,pwrap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek PMIC Wrapper
+
+maintainers:
+  - Flora Fu <flora.fu@mediatek.com>
+  - Alexandre Mergnat <amergnat@baylibre.com>
+
+description:
+  On MediaTek SoCs the PMIC is connected via SPI. The SPI master interface
+  is not directly visible to the CPU, but only through the PMIC wrapper
+  inside the SoC. The communication between the SoC and the PMIC can
+  optionally be encrypted. Also a non standard Dual IO SPI mode can be
+  used to increase speed.
+
+  IP Pairing
+
+  On MT8135 the pins of some SoC internal peripherals can be on the PMIC.
+  The signals of these pins are routed over the SPI bus using the pwrap
+  bridge. In the binding description below the properties needed for bridging
+  are marked with "IP Pairing". These are optional on SoCs which do not support
+  IP Pairing
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - mediatek,mt2701-pwrap
+              - mediatek,mt6765-pwrap
+              - mediatek,mt6779-pwrap
+              - mediatek,mt6795-pwrap
+              - mediatek,mt6797-pwrap
+              - mediatek,mt6873-pwrap
+              - mediatek,mt7622-pwrap
+              - mediatek,mt8135-pwrap
+              - mediatek,mt8173-pwrap
+              - mediatek,mt8183-pwrap
+              - mediatek,mt8186-pwrap
+              - mediatek,mt8188-pwrap
+              - mediatek,mt8195-pwrap
+              - mediatek,mt8365-pwrap
+              - mediatek,mt8516-pwrap
+      - items:
+          - enum:
+              - mediatek,mt8186-pwrap
+              - mediatek,mt8195-pwrap
+          - const: syscon
+
+  reg:
+    minItems: 1
+    items:
+      - description: PMIC wrapper registers
+      - description: IP pairing registers
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: pwrap
+      - const: pwrap-bridge
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    items:
+      - description: SPI bus clock
+      - description: Main module clock
+      - description: System module clock
+      - description: Timer module clock
+
+  clock-names:
+    minItems: 2
+    items:
+      - const: spi
+      - const: wrap
+      - const: sys
+      - const: tmr
+
+  resets:
+    minItems: 1
+    items:
+      - description: PMIC wrapper reset
+      - description: IP pairing reset
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: pwrap
+      - const: pwrap-bridge
+
+  pmic:
+    type: object
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - clocks
+  - clock-names
+
+dependentRequired:
+  resets: [reset-names]
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mediatek,mt8365-pwrap
+    then:
+      properties:
+        clocks:
+          minItems: 4
+
+        clock-names:
+          minItems: 4
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/reset/mt8135-resets.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        pwrap@1000f000 {
+            compatible = "mediatek,mt8135-pwrap";
+            reg = <0 0x1000f000 0 0x1000>,
+                  <0 0x11017000 0 0x1000>;
+            reg-names = "pwrap", "pwrap-bridge";
+            interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clk26m>, <&clk26m>;
+            clock-names = "spi", "wrap";
+            resets = <&infracfg MT8135_INFRA_PMIC_WRAP_RST>,
+                     <&pericfg MT8135_PERI_PWRAP_BRIDGE_SW_RST>;
+            reset-names = "pwrap", "pwrap-bridge";
+        };
+    };