diff options
Diffstat (limited to 'Documentation/devicetree/bindings/soc')
109 files changed, 10705 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml new file mode 100644 index 0000000000..cd06865e1f --- /dev/null +++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/amlogic/amlogic,canvas.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Canvas Video Lookup Table + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + - Maxime Jourdan <mjourdan@baylibre.com> + +description: | + A canvas is a collection of metadata that describes a pixel buffer. + Those metadata include: width, height, phyaddr, wrapping and block mode. + Starting with GXBB the endianness can also be described. + + Many IPs within Amlogic SoCs rely on canvas indexes to read/write pixel data + rather than use the phy addresses directly. For instance, this is the case for + the video decoders and the display. + + Amlogic SoCs have 256 canvas. + +properties: + compatible: + oneOf: + - items: + - enum: + - amlogic,meson8-canvas + - amlogic,meson8b-canvas + - amlogic,meson8m2-canvas + - const: amlogic,canvas + - const: amlogic,canvas # GXBB and newer SoCs + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + canvas: video-lut@48 { + compatible = "amlogic,canvas"; + reg = <0x48 0x14>; + }; diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-clk-measure.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-clk-measure.yaml new file mode 100644 index 0000000000..77c2811530 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-clk-measure.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/amlogic/amlogic,meson-gx-clk-measure.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Internal Clock Measurer + +description: + The Amlogic SoCs contains an IP to measure the internal clocks. + The precision is multiple of MHz, useful to debug the clock states. + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +properties: + compatible: + enum: + - amlogic,meson-gx-clk-measure + - amlogic,meson8-clk-measure + - amlogic,meson8b-clk-measure + - amlogic,meson-axg-clk-measure + - amlogic,meson-g12a-clk-measure + - amlogic,meson-sm1-clk-measure + + reg: + maxItems: 1 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + clock-measure@8758 { + compatible = "amlogic,meson-gx-clk-measure"; + reg = <0x8758 0x10>; + }; diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml new file mode 100644 index 0000000000..16977e4e43 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml @@ -0,0 +1,160 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson System Control registers + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +properties: + compatible: + items: + - enum: + - amlogic,meson-gx-hhi-sysctrl + - amlogic,meson-gx-ao-sysctrl + - amlogic,meson-axg-hhi-sysctrl + - amlogic,meson-axg-ao-sysctrl + - const: simple-mfd + - const: syscon + + reg: + maxItems: 1 + + clock-controller: + type: object + + power-controller: + $ref: /schemas/power/amlogic,meson-ee-pwrc.yaml + + pinctrl: + type: object + + phy: + type: object + +allOf: + - if: + properties: + compatible: + enum: + - amlogic,meson-gx-hhi-sysctrl + - amlogic,meson-axg-hhi-sysctrl + then: + properties: + clock-controller: + $ref: /schemas/clock/amlogic,gxbb-clkc.yaml# + + required: + - power-controller + + - if: + properties: + compatible: + enum: + - amlogic,meson-gx-ao-sysctrl + - amlogic,meson-axg-ao-sysctrl + then: + properties: + clock-controller: + $ref: /schemas/clock/amlogic,gxbb-aoclkc.yaml# + + power-controller: false + phy: false + + - if: + properties: + compatible: + enum: + - amlogic,meson-gx-hhi-sysctrl + then: + properties: + phy: false + + - if: + properties: + compatible: + enum: + - amlogic,meson-axg-hhi-sysctrl + then: + properties: + phy: + oneOf: + - $ref: /schemas/phy/amlogic,g12a-mipi-dphy-analog.yaml + - $ref: /schemas/phy/amlogic,meson-axg-mipi-pcie-analog.yaml + +required: + - compatible + - reg + - clock-controller + +additionalProperties: false + +examples: + - | + bus@c883c000 { + compatible = "simple-bus"; + reg = <0xc883c000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc883c000 0x2000>; + + sysctrl: system-controller@0 { + compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"; + reg = <0 0x400>; + + clock-controller { + compatible = "amlogic,gxbb-clkc"; + #clock-cells = <1>; + clocks = <&xtal>; + clock-names = "xtal"; + }; + + power-controller { + compatible = "amlogic,meson-gxbb-pwrc"; + #power-domain-cells = <1>; + amlogic,ao-sysctrl = <&sysctrl_AO>; + + resets = <&reset_viu>, + <&reset_venc>, + <&reset_vcbus>, + <&reset_bt656>, + <&reset_dvin>, + <&reset_rdma>, + <&reset_venci>, + <&reset_vencp>, + <&reset_vdac>, + <&reset_vdi6>, + <&reset_vencl>, + <&reset_vid_lock>; + reset-names = "viu", "venc", "vcbus", "bt656", "dvin", + "rdma", "venci", "vencp", "vdac", "vdi6", + "vencl", "vid_lock"; + clocks = <&clk_vpu>, <&clk_vapb>; + clock-names = "vpu", "vapb"; + }; + }; + }; + + bus@c8100000 { + compatible = "simple-bus"; + reg = <0xc8100000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc8100000 0x100000>; + + sysctrl_AO: system-controller@0 { + compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon"; + reg = <0 0x100>; + + clock-controller { + compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc"; + #clock-cells = <1>; + #reset-cells = <1>; + clocks = <&xtal>, <&clk81>; + clock-names = "xtal", "mpeg-clk"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/aspeed/uart-routing.yaml b/Documentation/devicetree/bindings/soc/aspeed/uart-routing.yaml new file mode 100644 index 0000000000..51aaf34acb --- /dev/null +++ b/Documentation/devicetree/bindings/soc/aspeed/uart-routing.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# # Copyright (c) 2018 Google LLC +# # Copyright (c) 2021 Aspeed Technology Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/aspeed/uart-routing.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Aspeed UART Routing Controller + +maintainers: + - Oskar Senft <osk@google.com> + - Chia-Wei Wang <chiawei_wang@aspeedtech.com> + +description: + The Aspeed UART routing control allow to dynamically route the inputs for + the built-in UARTS and physical serial I/O ports. + + This allows, for example, to connect the output of UART to another UART. + This can be used to enable Host <-> BMC communication via UARTs, e.g. to + allow access to the Host's serial console. + + This driver is for the BMC side. The sysfs files allow the BMC userspace + which owns the system configuration policy, to configure how UARTs and + physical serial I/O ports are routed. + +properties: + compatible: + items: + - enum: + - aspeed,ast2400-uart-routing + - aspeed,ast2500-uart-routing + - aspeed,ast2600-uart-routing + reg: + maxItems: 1 + +required: + - compatible + +additionalProperties: false + +examples: + - | + lpc: lpc@1e789000 { + compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon"; + reg = <0x1e789000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1e789000 0x1000>; + + uart_routing: uart-routing@98 { + compatible = "aspeed,ast2600-uart-routing"; + reg = <0x98 0x8>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm23550-cdc.yaml b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm23550-cdc.yaml new file mode 100644 index 0000000000..1a952f5698 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm23550-cdc.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/bcm/brcm,bcm23550-cdc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM23550 Cluster Dormant Control + +description: + The Cluster Dormant Control block keeps the CPU in idle state. A command + needs to be sent to this block to bring the CPU into running state. + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +properties: + compatible: + const: brcm,bcm23550-cdc + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + cdc@3fe0e000 { + compatible = "brcm,bcm23550-cdc"; + reg = <0x3fe0e000 0x78>; + }; +... diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml new file mode 100644 index 0000000000..e28ef198a8 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/bcm/brcm,bcm2835-pm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: BCM2835 PM (Power domains, watchdog) + +description: | + The PM block controls power domains and some reset lines, and includes a + watchdog timer. + +maintainers: + - Nicolas Saenz Julienne <nsaenz@kernel.org> + +allOf: + - $ref: /schemas/watchdog/watchdog.yaml# + +properties: + compatible: + items: + - enum: + - brcm,bcm2835-pm + - brcm,bcm2711-pm + - const: brcm,bcm2835-pm-wdt + + reg: + minItems: 2 + maxItems: 3 + + reg-names: + minItems: 2 + items: + - const: pm + - const: asb + - const: rpivid_asb + + "#power-domain-cells": + const: 1 + + "#reset-cells": + const: 1 + + clocks: + minItems: 4 + maxItems: 4 + + clock-names: + items: + - const: v3d + - const: peri_image + - const: h264 + - const: isp + + system-power-controller: + type: boolean + + timeout-sec: true + +required: + - compatible + - reg + - "#power-domain-cells" + - "#reset-cells" + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/bcm2835.h> + + watchdog@7e100000 { + compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt"; + #power-domain-cells = <1>; + #reset-cells = <1>; + reg = <0x7e100000 0x114>, + <0x7e00a000 0x24>; + reg-names = "pm", "asb"; + clocks = <&clocks BCM2835_CLOCK_V3D>, + <&clocks BCM2835_CLOCK_PERI_IMAGE>, + <&clocks BCM2835_CLOCK_H264>, + <&clocks BCM2835_CLOCK_ISP>; + clock-names = "v3d", "peri_image", "h264", "isp"; + system-power-controller; + }; diff --git a/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.yaml b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.yaml new file mode 100644 index 0000000000..e04439b335 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-vchiq.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/bcm/brcm,bcm2835-vchiq.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom VCHIQ firmware services + +maintainers: + - Nicolas Saenz Julienne <nsaenz@kernel.org> + +description: + The VCHIQ communication channel can be provided by BCM283x and Capri SoCs, + to communicate with the VPU-side OS services. + +properties: + compatible: + oneOf: + - description: BCM2835 based boards + items: + - enum: + - brcm,bcm2835-vchiq + + - description: BCM2836/BCM2837 based boards + items: + - enum: + - brcm,bcm2836-vchiq + - const: brcm,bcm2835-vchiq + + reg: + description: Physical base address and length of the doorbell register pair + minItems: 1 + + interrupts: + description: Interrupt number of the doorbell interrupt + minItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + mailbox@7e00b840 { + compatible = "brcm,bcm2835-vchiq"; + reg = <0x7e00b840 0xf>; + interrupts = <0 2>; + }; + +... diff --git a/Documentation/devicetree/bindings/soc/bcm/raspberrypi,bcm2835-power.txt b/Documentation/devicetree/bindings/soc/bcm/raspberrypi,bcm2835-power.txt new file mode 100644 index 0000000000..30942cf799 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/bcm/raspberrypi,bcm2835-power.txt @@ -0,0 +1,47 @@ +Raspberry Pi power domain driver + +Required properties: + +- compatible: Should be "raspberrypi,bcm2835-power". +- firmware: Reference to the RPi firmware device node. +- #power-domain-cells: Should be <1>, we providing multiple power domains. + +The valid defines for power domain are: + + RPI_POWER_DOMAIN_I2C0 + RPI_POWER_DOMAIN_I2C1 + RPI_POWER_DOMAIN_I2C2 + RPI_POWER_DOMAIN_VIDEO_SCALER + RPI_POWER_DOMAIN_VPU1 + RPI_POWER_DOMAIN_HDMI + RPI_POWER_DOMAIN_USB + RPI_POWER_DOMAIN_VEC + RPI_POWER_DOMAIN_JPEG + RPI_POWER_DOMAIN_H264 + RPI_POWER_DOMAIN_V3D + RPI_POWER_DOMAIN_ISP + RPI_POWER_DOMAIN_UNICAM0 + RPI_POWER_DOMAIN_UNICAM1 + RPI_POWER_DOMAIN_CCP2RX + RPI_POWER_DOMAIN_CSI2 + RPI_POWER_DOMAIN_CPI + RPI_POWER_DOMAIN_DSI0 + RPI_POWER_DOMAIN_DSI1 + RPI_POWER_DOMAIN_TRANSPOSER + RPI_POWER_DOMAIN_CCP2TX + RPI_POWER_DOMAIN_CDP + RPI_POWER_DOMAIN_ARM + +Example: + +power: power { + compatible = "raspberrypi,bcm2835-power"; + firmware = <&firmware>; + #power-domain-cells = <1>; +}; + +Example for using power domain: + +&usb { + power-domains = <&power RPI_POWER_DOMAIN_USB>; +}; diff --git a/Documentation/devicetree/bindings/soc/dove/pmu.txt b/Documentation/devicetree/bindings/soc/dove/pmu.txt new file mode 100644 index 0000000000..edd40b796b --- /dev/null +++ b/Documentation/devicetree/bindings/soc/dove/pmu.txt @@ -0,0 +1,56 @@ +Device Tree bindings for Marvell PMU + +Required properties: + - compatible: value should be "marvell,dove-pmu". + May also include "simple-bus" if there are child devices, in which + case the ranges node is required. + - reg: two base addresses and sizes of the PM controller and PMU. + - interrupts: single interrupt number for the PMU interrupt + - interrupt-controller: must be specified as the PMU itself is an + interrupt controller. + - #interrupt-cells: must be 1. + - #reset-cells: must be 1. + - domains: sub-node containing domain descriptions + +Optional properties: + - ranges: defines the address mapping for child devices, as per the + standard property of this name. Required when compatible includes + "simple-bus". + +Power domain descriptions are listed as child nodes of the "domains" +sub-node. Each domain has the following properties: + +Required properties: + - #power-domain-cells: must be 0. + +Optional properties: + - marvell,pmu_pwr_mask: specifies the mask value for PMU power register + - marvell,pmu_iso_mask: specifies the mask value for PMU isolation register + - resets: points to the reset manager (PMU node) and reset index. + +Example: + + pmu: power-management@d0000 { + compatible = "marvell,dove-pmu"; + reg = <0xd0000 0x8000>, <0xd8000 0x8000>; + interrupts = <33>; + interrupt-controller; + #interrupt-cells = <1>; + #reset-cells = <1>; + + domains { + vpu_domain: vpu-domain { + #power-domain-cells = <0>; + marvell,pmu_pwr_mask = <0x00000008>; + marvell,pmu_iso_mask = <0x00000001>; + resets = <&pmu 16>; + }; + + gpu_domain: gpu-domain { + #power-domain-cells = <0>; + marvell,pmu_pwr_mask = <0x00000004>; + marvell,pmu_iso_mask = <0x00000002>; + resets = <&pmu 18>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/bman-portals.txt b/Documentation/devicetree/bindings/soc/fsl/bman-portals.txt new file mode 100644 index 0000000000..2a00e14e11 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/bman-portals.txt @@ -0,0 +1,56 @@ +QorIQ DPAA Buffer Manager Portals Device Tree Binding + +Copyright (C) 2008 - 2014 Freescale Semiconductor Inc. + +CONTENTS + + - BMan Portal + - Example + +BMan Portal Node + +Portals are memory mapped interfaces to BMan that allow low-latency, lock-less +interaction by software running on processor cores, accelerators and network +interfaces with the BMan + +PROPERTIES + +- compatible + Usage: Required + Value type: <stringlist> + Definition: Must include "fsl,bman-portal-<hardware revision>" + May include "fsl,<SoC>-bman-portal" or "fsl,bman-portal" + +- reg + Usage: Required + Value type: <prop-encoded-array> + Definition: Two regions. The first is the cache-enabled region of + the portal. The second is the cache-inhibited region of + the portal + +- interrupts + Usage: Required + Value type: <prop-encoded-array> + Definition: Standard property + +EXAMPLE + +The example below shows a (P4080) BMan portals container/bus node with two portals + + bman-portals@ff4000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0xf 0xf4000000 0x200000>; + + bman-portal@0 { + compatible = "fsl,bman-portal-1.0.0", "fsl,bman-portal"; + reg = <0x0 0x4000>, <0x100000 0x1000>; + interrupts = <105 2 0 0>; + }; + bman-portal@4000 { + compatible = "fsl,bman-portal-1.0.0", "fsl,bman-portal"; + reg = <0x4000 0x4000>, <0x101000 0x1000>; + interrupts = <107 2 0 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/bman.txt b/Documentation/devicetree/bindings/soc/fsl/bman.txt new file mode 100644 index 0000000000..48eed14076 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/bman.txt @@ -0,0 +1,137 @@ +QorIQ DPAA Buffer Manager Device Tree Bindings + +Copyright (C) 2008 - 2014 Freescale Semiconductor Inc. + +CONTENTS + + - BMan Node + - BMan Private Memory Node + - Example + +BMan Node + +The Buffer Manager is part of the Data-Path Acceleration Architecture (DPAA). +BMan supports hardware allocation and deallocation of buffers belonging to pools +originally created by software with configurable depletion thresholds. This +binding covers the CCSR space programming model + +PROPERTIES + +- compatible + Usage: Required + Value type: <stringlist> + Definition: Must include "fsl,bman" + May include "fsl,<SoC>-bman" + +- reg + Usage: Required + Value type: <prop-encoded-array> + Definition: Registers region within the CCSR address space + +The BMan revision information is located in the BMAN_IP_REV_1/2 registers which +are located at offsets 0xbf8 and 0xbfc + +- interrupts + Usage: Required + Value type: <prop-encoded-array> + Definition: Standard property. The error interrupt + +- fsl,bman-portals + Usage: Required + Value type: <phandle> + Definition: Phandle to this BMan instance's portals + +- fsl,liodn + Usage: See pamu.txt + Value type: <prop-encoded-array> + Definition: PAMU property used for static LIODN assignment + +- fsl,iommu-parent + Usage: See pamu.txt + Value type: <phandle> + Definition: PAMU property used for dynamic LIODN assignment + + For additional details about the PAMU/LIODN binding(s) see pamu.txt + +Devices connected to a BMan instance via Direct Connect Portals (DCP) must link +to the respective BMan instance + +- fsl,bman + Usage: Required + Value type: <prop-encoded-array> + Description: List of phandle and DCP index pairs, to the BMan instance + to which this device is connected via the DCP + +BMan Private Memory Node + +BMan requires a contiguous range of physical memory used for the backing store +for BMan Free Buffer Proxy Records (FBPR). This memory is reserved/allocated as +a node under the /reserved-memory node. + +The BMan FBPR memory node must be named "bman-fbpr" + +PROPERTIES + +- compatible + Usage: required + Value type: <stringlist> + Definition: PPC platforms: Must include "fsl,bman-fbpr" + ARM platforms: Must include "shared-dma-pool" + as well as the "no-map" property + +The following constraints are relevant to the FBPR private memory: + - The size must be 2^(size + 1), with size = 11..33. That is 4 KiB to + 16 GiB + - The alignment must be a muliptle of the memory size + +The size of the FBPR must be chosen by observing the hardware features configured +via the Reset Configuration Word (RCW) and that are relevant to a specific board +(e.g. number of MAC(s) pinned-out, number of offline/host command FMan ports, +etc.). The size configured in the DT must reflect the hardware capabilities and +not the specific needs of an application + +For additional details about reserved memory regions see reserved-memory.txt + +EXAMPLE + +The example below shows a BMan FBPR dynamic allocation memory node + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + compatible = "shared-mem-pool"; + size = <0 0x1000000>; + alignment = <0 0x1000000>; + no-map; + }; + }; + +The example below shows a (P4080) BMan CCSR-space node + + bportals: bman-portals@ff4000000 { + ... + }; + + crypto@300000 { + ... + fsl,bman = <&bman, 2>; + ... + }; + + bman: bman@31a000 { + compatible = "fsl,bman"; + reg = <0x31a000 0x1000>; + interrupts = <16 2 1 2>; + fsl,liodn = <0x17>; + fsl,bman-portals = <&bportals>; + memory-region = <&bman_fbpr>; + }; + + fman@400000 { + ... + fsl,bman = <&bman, 0>; + ... + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm.txt new file mode 100644 index 0000000000..160c752484 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm.txt @@ -0,0 +1,67 @@ +* Freescale Communications Processor Module + +NOTE: This is an interim binding, and will likely change slightly, +as more devices are supported. The QE bindings especially are +incomplete. + +* Root CPM node + +Properties: +- compatible : "fsl,cpm1", "fsl,cpm2", or "fsl,qe". +- reg : A 48-byte region beginning with CPCR. + +Example: + cpm@119c0 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + compatible = "fsl,mpc8272-cpm", "fsl,cpm2"; + reg = <119c0 30>; + } + +* Properties common to multiple CPM/QE devices + +- fsl,cpm-command : This value is ORed with the opcode and command flag + to specify the device on which a CPM command operates. + +- fsl,cpm-brg : Indicates which baud rate generator the device + is associated with. If absent, an unused BRG + should be dynamically allocated. If zero, the + device uses an external clock rather than a BRG. + +- reg : Unless otherwise specified, the first resource represents the + scc/fcc/ucc registers, and the second represents the device's + parameter RAM region (if it has one). + +* Multi-User RAM (MURAM) + +The multi-user/dual-ported RAM is expressed as a bus under the CPM node. + +Ranges must be set up subject to the following restrictions: + +- Children's reg nodes must be offsets from the start of all muram, even + if the user-data area does not begin at zero. +- If multiple range entries are used, the difference between the parent + address and the child address must be the same in all, so that a single + mapping can cover them all while maintaining the ability to determine + CPM-side offsets with pointer subtraction. It is recommended that + multiple range entries not be used. +- A child address of zero must be translatable, even if no reg resources + contain it. + +A child "data" node must exist, compatible with "fsl,cpm-muram-data", to +indicate the portion of muram that is usable by the OS for arbitrary +purposes. The data node may have an arbitrary number of reg resources, +all of which contribute to the allocatable muram pool. + +Example, based on mpc8272: + muram@0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 2000 9800 800>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm/brg.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm/brg.txt new file mode 100644 index 0000000000..4c7d45eaf0 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm/brg.txt @@ -0,0 +1,21 @@ +* Baud Rate Generators + +Currently defined compatibles: +fsl,cpm-brg +fsl,cpm1-brg +fsl,cpm2-brg + +Properties: +- reg : There may be an arbitrary number of reg resources; BRG + numbers are assigned to these in order. +- clock-frequency : Specifies the base frequency driving + the BRG. + +Example: + brg@119f0 { + compatible = "fsl,mpc8272-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <119f0 10 115f0 10>; + clock-frequency = <d#25000000>; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm/i2c.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm/i2c.txt new file mode 100644 index 0000000000..87bc604866 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm/i2c.txt @@ -0,0 +1,41 @@ +* I2C + +The I2C controller is expressed as a bus under the CPM node. + +Properties: +- compatible : "fsl,cpm1-i2c", "fsl,cpm2-i2c" +- reg : On CPM2 devices, the second resource doesn't specify the I2C + Parameter RAM itself, but the I2C_BASE field of the CPM2 Parameter RAM + (typically 0x8afc 0x2). +- #address-cells : Should be one. The cell is the i2c device address with + the r/w bit set to zero. +- #size-cells : Should be zero. +- clock-frequency : Can be used to set the i2c clock frequency. If + unspecified, a default frequency of 60kHz is being used. +The following two properties are deprecated. They are only used by legacy +i2c drivers to find the bus to probe: +- linux,i2c-index : Can be used to hard code an i2c bus number. By default, + the bus number is dynamically assigned by the i2c core. +- linux,i2c-class : Can be used to override the i2c class. The class is used + by legacy i2c device drivers to find a bus in a specific context like + system management, video or sound. By default, I2C_CLASS_HWMON (1) is + being used. The definition of the classes can be found in + include/i2c/i2c.h + +Example, based on mpc823: + + i2c@860 { + compatible = "fsl,mpc823-i2c", + "fsl,cpm1-i2c"; + reg = <0x860 0x20 0x3c80 0x30>; + interrupts = <16>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-command = <0x10>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@68 { + compatible = "dallas,ds1307"; + reg = <0x68>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm/pic.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm/pic.txt new file mode 100644 index 0000000000..8e3ee16816 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm/pic.txt @@ -0,0 +1,18 @@ +* Interrupt Controllers + +Currently defined compatibles: +- fsl,cpm1-pic + - only one interrupt cell +- fsl,pq1-pic +- fsl,cpm2-pic + - second interrupt cell is level/sense: + - 2 is falling edge + - 8 is active low + +Example: + interrupt-controller@10c00 { + #interrupt-cells = <2>; + interrupt-controller; + reg = <10c00 80>; + compatible = "mpc8272-pic", "fsl,cpm2-pic"; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm/usb.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm/usb.txt new file mode 100644 index 0000000000..74bfda4bb8 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/cpm/usb.txt @@ -0,0 +1,15 @@ +* USB (Universal Serial Bus Controller) + +Properties: +- compatible : "fsl,cpm1-usb", "fsl,cpm2-usb", "fsl,qe-usb" + +Example: + usb@11bc0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,cpm2-usb"; + reg = <11b60 18 8b00 100>; + interrupts = <b 8>; + interrupt-parent = <&PIC>; + fsl,cpm-command = <2e600000>; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml new file mode 100644 index 0000000000..ec888f48ca --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml @@ -0,0 +1,162 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,cpm1-scc-qmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PowerQUICC CPM QUICC Multichannel Controller (QMC) + +maintainers: + - Herve Codina <herve.codina@bootlin.com> + +description: + The QMC (QUICC Multichannel Controller) emulates up to 64 channels within one + serial controller using the same TDM physical interface routed from TSA. + +properties: + compatible: + items: + - enum: + - fsl,mpc885-scc-qmc + - fsl,mpc866-scc-qmc + - const: fsl,cpm1-scc-qmc + + reg: + items: + - description: SCC (Serial communication controller) register base + - description: SCC parameter ram base + - description: Dual port ram base + + reg-names: + items: + - const: scc_regs + - const: scc_pram + - const: dpram + + interrupts: + maxItems: 1 + description: SCC interrupt line in the CPM interrupt controller + + fsl,tsa-serial: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to TSA node + - enum: [1, 2, 3] + description: | + TSA serial interface (dt-bindings/soc/cpm1-fsl,tsa.h defines these + values) + - 1: SCC2 + - 2: SCC3 + - 3: SCC4 + description: + Should be a phandle/number pair. The phandle to TSA node and the TSA + serial interface to use. + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + '^channel@([0-9]|[1-5][0-9]|6[0-3])$': + description: + A channel managed by this controller + type: object + + properties: + reg: + minimum: 0 + maximum: 63 + description: + The channel number + + fsl,operational-mode: + $ref: /schemas/types.yaml#/definitions/string + enum: [transparent, hdlc] + default: transparent + description: | + The channel operational mode + - hdlc: The channel handles HDLC frames + - transparent: The channel handles raw data without any processing + + fsl,reverse-data: + $ref: /schemas/types.yaml#/definitions/flag + description: + The bit order as seen on the channels is reversed, + transmitting/receiving the MSB of each octet first. + This flag is used only in 'transparent' mode. + + fsl,tx-ts-mask: + $ref: /schemas/types.yaml#/definitions/uint64 + description: + Channel assigned Tx time-slots within the Tx time-slots routed by the + TSA to this cell. + + fsl,rx-ts-mask: + $ref: /schemas/types.yaml#/definitions/uint64 + description: + Channel assigned Rx time-slots within the Rx time-slots routed by the + TSA to this cell. + + required: + - reg + - fsl,tx-ts-mask + - fsl,rx-ts-mask + +required: + - compatible + - reg + - reg-names + - interrupts + - fsl,tsa-serial + - '#address-cells' + - '#size-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/cpm1-fsl,tsa.h> + + qmc@a60 { + compatible = "fsl,mpc885-scc-qmc", "fsl,cpm1-scc-qmc"; + reg = <0xa60 0x20>, + <0x3f00 0xc0>, + <0x2000 0x1000>; + reg-names = "scc_regs", "scc_pram", "dpram"; + interrupts = <27>; + interrupt-parent = <&CPM_PIC>; + + #address-cells = <1>; + #size-cells = <0>; + + fsl,tsa-serial = <&tsa FSL_CPM_TSA_SCC4>; + + channel@16 { + /* Ch16 : First 4 even TS from all routed from TSA */ + reg = <16>; + fsl,mode = "transparent"; + fsl,reverse-data; + fsl,tx-ts-mask = <0x00000000 0x000000aa>; + fsl,rx-ts-mask = <0x00000000 0x000000aa>; + }; + + channel@17 { + /* Ch17 : First 4 odd TS from all routed from TSA */ + reg = <17>; + fsl,mode = "transparent"; + fsl,reverse-data; + fsl,tx-ts-mask = <0x00000000 0x00000055>; + fsl,rx-ts-mask = <0x00000000 0x00000055>; + }; + + channel@19 { + /* Ch19 : 8 TS (TS 8..15) from all routed from TSA */ + reg = <19>; + fsl,mode = "hdlc"; + fsl,tx-ts-mask = <0x00000000 0x0000ff00>; + fsl,rx-ts-mask = <0x00000000 0x0000ff00>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-tsa.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-tsa.yaml new file mode 100644 index 0000000000..7e51c639a7 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-tsa.yaml @@ -0,0 +1,205 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,cpm1-tsa.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PowerQUICC CPM Time-slot assigner (TSA) controller + +maintainers: + - Herve Codina <herve.codina@bootlin.com> + +description: + The TSA is the time-slot assigner that can be found on some PowerQUICC SoC. + Its purpose is to route some TDM time-slots to other internal serial + controllers. + +properties: + compatible: + items: + - enum: + - fsl,mpc885-tsa + - fsl,mpc866-tsa + - const: fsl,cpm1-tsa + + reg: + items: + - description: SI (Serial Interface) register base + - description: SI RAM base + + reg-names: + items: + - const: si_regs + - const: si_ram + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + '^tdm@[0-1]$': + description: + The TDM managed by this controller + type: object + + additionalProperties: false + + properties: + reg: + minimum: 0 + maximum: 1 + description: + The TDM number for this TDM, 0 for TDMa and 1 for TDMb + + fsl,common-rxtx-pins: + $ref: /schemas/types.yaml#/definitions/flag + description: + The hardware can use four dedicated pins for Tx clock, Tx sync, Rx + clock and Rx sync or use only two pins, Tx/Rx clock and Tx/Rx sync. + Without the 'fsl,common-rxtx-pins' property, the four pins are used. + With the 'fsl,common-rxtx-pins' property, two pins are used. + + clocks: + minItems: 2 + items: + - description: External clock connected to L1RSYNC pin + - description: External clock connected to L1RCLK pin + - description: External clock connected to L1TSYNC pin + - description: External clock connected to L1TCLK pin + + clock-names: + minItems: 2 + items: + - const: l1rsync + - const: l1rclk + - const: l1tsync + - const: l1tclk + + fsl,rx-frame-sync-delay-bits: + enum: [0, 1, 2, 3] + default: 0 + description: | + Receive frame sync delay in number of bits. + Indicates the delay between the Rx sync and the first bit of the Rx + frame. 0 for no bit delay. 1, 2 or 3 for 1, 2 or 3 bits delay. + + fsl,tx-frame-sync-delay-bits: + enum: [0, 1, 2, 3] + default: 0 + description: | + Transmit frame sync delay in number of bits. + Indicates the delay between the Tx sync and the first bit of the Tx + frame. 0 for no bit delay. 1, 2 or 3 for 1, 2 or 3 bits delay. + + fsl,clock-falling-edge: + $ref: /schemas/types.yaml#/definitions/flag + description: + Data is sent on falling edge of the clock (and received on the rising + edge). If 'clock-falling-edge' is not present, data is sent on the + rising edge (and received on the falling edge). + + fsl,fsync-rising-edge: + $ref: /schemas/types.yaml#/definitions/flag + description: + Frame sync pulses are sampled with the rising edge of the channel + clock. If 'fsync-rising-edge' is not present, pulses are sampled with + the falling edge. + + fsl,double-speed-clock: + $ref: /schemas/types.yaml#/definitions/flag + description: + The channel clock is twice the data rate. + + patternProperties: + '^fsl,[rt]x-ts-routes$': + $ref: /schemas/types.yaml#/definitions/uint32-matrix + description: | + A list of tuple that indicates the Tx or Rx time-slots routes. + items: + items: + - description: + The number of time-slots + minimum: 1 + maximum: 64 + - description: | + The source (Tx) or destination (Rx) serial interface + (dt-bindings/soc/cpm1-fsl,tsa.h defines these values) + - 0: No destination + - 1: SCC2 + - 2: SCC3 + - 3: SCC4 + - 4: SMC1 + - 5: SMC2 + enum: [0, 1, 2, 3, 4, 5] + minItems: 1 + maxItems: 64 + + allOf: + # If fsl,common-rxtx-pins is present, only 2 clocks are needed. + # Else, the 4 clocks must be present. + - if: + required: + - fsl,common-rxtx-pins + then: + properties: + clocks: + maxItems: 2 + clock-names: + maxItems: 2 + else: + properties: + clocks: + minItems: 4 + clock-names: + minItems: 4 + + required: + - reg + - clocks + - clock-names + +required: + - compatible + - reg + - reg-names + - '#address-cells' + - '#size-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/cpm1-fsl,tsa.h> + + tsa@ae0 { + compatible = "fsl,mpc885-tsa", "fsl,cpm1-tsa"; + reg = <0xae0 0x10>, + <0xc00 0x200>; + reg-names = "si_regs", "si_ram"; + + #address-cells = <1>; + #size-cells = <0>; + + tdm@0 { + /* TDMa */ + reg = <0>; + + clocks = <&clk_l1rsynca>, <&clk_l1rclka>; + clock-names = "l1rsync", "l1rclk"; + + fsl,common-rxtx-pins; + fsl,fsync-rising-edge; + + fsl,tx-ts-routes = <2 0>, /* TS 0..1 */ + <24 FSL_CPM_TSA_SCC4>, /* TS 2..25 */ + <1 0>, /* TS 26 */ + <5 FSL_CPM_TSA_SCC3>; /* TS 27..31 */ + + fsl,rx-ts-routes = <2 0>, /* TS 0..1 */ + <24 FSL_CPM_TSA_SCC4>, /* 2..25 */ + <1 0>, /* TS 26 */ + <5 FSL_CPM_TSA_SCC3>; /* TS 27..31 */ + }; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt new file mode 100644 index 0000000000..cce3cd71e8 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt @@ -0,0 +1,56 @@ +Every GPIO controller node must have #gpio-cells property defined, +this information will be used to translate gpio-specifiers. + +On CPM1 devices, all ports are using slightly different register layouts. +Ports A, C and D are 16bit ports and Ports B and E are 32bit ports. + +On CPM2 devices, all ports are 32bit ports and use a common register layout. + +Required properties: +- compatible : "fsl,cpm1-pario-bank-a", "fsl,cpm1-pario-bank-b", + "fsl,cpm1-pario-bank-c", "fsl,cpm1-pario-bank-d", + "fsl,cpm1-pario-bank-e", "fsl,cpm2-pario-bank" +- #gpio-cells : Should be two. The first cell is the pin number and the + second cell is used to specify optional parameters (currently unused). +- gpio-controller : Marks the port as GPIO controller. +Optional properties: +- fsl,cpm1-gpio-irq-mask : For banks having interrupt capability (like port C + on CPM1), this item tells which ports have an associated interrupt (ports are + listed in the same order as in PCINT register) +- interrupts : This property provides the list of interrupt for each GPIO having + one as described by the fsl,cpm1-gpio-irq-mask property. There should be as + many interrupts as number of ones in the mask property. The first interrupt in + the list corresponds to the most significant bit of the mask. + +Example of four SOC GPIO banks defined as gpio-controller nodes: + + CPM1_PIO_A: gpio-controller@950 { + #gpio-cells = <2>; + compatible = "fsl,cpm1-pario-bank-a"; + reg = <0x950 0x10>; + gpio-controller; + }; + + CPM1_PIO_B: gpio-controller@ab8 { + #gpio-cells = <2>; + compatible = "fsl,cpm1-pario-bank-b"; + reg = <0xab8 0x10>; + gpio-controller; + }; + + CPM1_PIO_C: gpio-controller@960 { + #gpio-cells = <2>; + compatible = "fsl,cpm1-pario-bank-c"; + reg = <0x960 0x10>; + fsl,cpm1-gpio-irq-mask = <0x0fff>; + interrupts = <1 2 6 9 10 11 14 15 23 24 26 31>; + interrupt-parent = <&CPM_PIC>; + gpio-controller; + }; + + CPM1_PIO_E: gpio-controller@ac8 { + #gpio-cells = <2>; + compatible = "fsl,cpm1-pario-bank-e"; + reg = <0xac8 0x18>; + gpio-controller; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/network.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/network.txt new file mode 100644 index 0000000000..6d2dd8a314 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/network.txt @@ -0,0 +1,130 @@ +* Network + +Currently defined compatibles: +- fsl,cpm1-scc-enet +- fsl,cpm2-scc-enet +- fsl,cpm1-fec-enet +- fsl,cpm2-fcc-enet (third resource is GFEMR) +- fsl,qe-enet + +Example: + + ethernet@11300 { + compatible = "fsl,mpc8272-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <11300 20 8400 100 11390 1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <20 8>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY0>; + fsl,cpm-command = <12000300>; + }; + +* MDIO + +Currently defined compatibles: +fsl,pq1-fec-mdio (reg is same as first resource of FEC device) +fsl,cpm2-mdio-bitbang (reg is port C registers) + +Properties for fsl,cpm2-mdio-bitbang: +fsl,mdio-pin : pin of port C controlling mdio data +fsl,mdc-pin : pin of port C controlling mdio clock + +Example: + mdio@10d40 { + compatible = "fsl,mpc8272ads-mdio-bitbang", + "fsl,mpc8272-mdio-bitbang", + "fsl,cpm2-mdio-bitbang"; + reg = <10d40 14>; + #address-cells = <1>; + #size-cells = <0>; + fsl,mdio-pin = <12>; + fsl,mdc-pin = <13>; + }; + +* HDLC + +Currently defined compatibles: +- fsl,ucc-hdlc + +Properties for fsl,ucc-hdlc: +- rx-clock-name +- tx-clock-name + Usage: required + Value type: <string> + Definition : Must be "brg1"-"brg16" for internal clock source, + Must be "clk1"-"clk24" for external clock source. + +- fsl,tdm-interface + Usage: optional + Value type: <empty> + Definition : Specify that hdlc is based on tdm-interface + +The property below is dependent on fsl,tdm-interface: +- fsl,rx-sync-clock + Usage: required + Value type: <string> + Definition : Must be "none", "rsync_pin", "brg9-11" and "brg13-15". + +- fsl,tx-sync-clock + Usage: required + Value type: <string> + Definition : Must be "none", "tsync_pin", "brg9-11" and "brg13-15". + +- fsl,tdm-framer-type + Usage: required for tdm interface + Value type: <string> + Definition : "e1" or "t1".Now e1 and t1 are used, other framer types + are not supported. + +- fsl,tdm-id + Usage: required for tdm interface + Value type: <u32> + Definition : number of TDM ID + +- fsl,tx-timeslot-mask +- fsl,rx-timeslot-mask + Usage: required for tdm interface + Value type: <u32> + Definition : time slot mask for TDM operation. Indicates which time + slots used for transmitting and receiving. + +- fsl,siram-entry-id + Usage: required for tdm interface + Value type: <u32> + Definition : Must be 0,2,4...64. the number of TDM entry. + +- fsl,tdm-internal-loopback + usage: optional for tdm interface + value type: <empty> + Definition : Internal loopback connecting on TDM layer. +- fsl,hmask + usage: optional + Value type: <u16> + Definition: HDLC address recognition. Set to zero to disable + address filtering of packets: + fsl,hmask = /bits/ 16 <0x0000>; + +Example for tdm interface: + + ucc@2000 { + compatible = "fsl,ucc-hdlc"; + rx-clock-name = "clk8"; + tx-clock-name = "clk9"; + fsl,rx-sync-clock = "rsync_pin"; + fsl,tx-sync-clock = "tsync_pin"; + fsl,tx-timeslot-mask = <0xfffffffe>; + fsl,rx-timeslot-mask = <0xfffffffe>; + fsl,tdm-framer-type = "e1"; + fsl,tdm-id = <0>; + fsl,siram-entry-id = <0>; + fsl,tdm-interface; + }; + +Example for hdlc without tdm interface: + + ucc@2000 { + compatible = "fsl,ucc-hdlc"; + rx-clock-name = "brg1"; + tx-clock-name = "brg1"; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt new file mode 100644 index 0000000000..05ec2a838c --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt @@ -0,0 +1,178 @@ +* Freescale QUICC Engine module (QE) +This represents qe module that is installed on PowerQUICC II Pro. + +NOTE: This is an interim binding; it should be updated to fit +in with the CPM binding later in this document. + +Basically, it is a bus of devices, that could act more or less +as a complete entity (UCC, USB etc ). All of them should be siblings on +the "root" qe node, using the common properties from there. +The description below applies to the qe of MPC8360 and +more nodes and properties would be extended in the future. + +i) Root QE device + +Required properties: +- compatible : should be "fsl,qe"; +- model : precise model of the QE, Can be "QE", "CPM", or "CPM2" +- reg : offset and length of the device registers. +- bus-frequency : the clock frequency for QUICC Engine. +- fsl,qe-num-riscs: define how many RISC engines the QE has. +- fsl,qe-snums: This property has to be specified as '/bits/ 8' value, + defining the array of serial number (SNUM) values for the virtual + threads. + +Optional properties: +- fsl,firmware-phandle: + Usage: required only if there is no fsl,qe-firmware child node + Value type: <phandle> + Definition: Points to a firmware node (see "QE Firmware Node" below) + that contains the firmware that should be uploaded for this QE. + The compatible property for the firmware node should say, + "fsl,qe-firmware". + +Recommended properties +- brg-frequency : the internal clock source frequency for baud-rate + generators in Hz. + +Deprecated properties +- fsl,qe-num-snums: define how many serial number(SNUM) the QE can use + for the threads. Use fsl,qe-snums instead to not only specify the + number of snums, but also their values. + +Example: + qe@e0100000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + compatible = "fsl,qe"; + ranges = <0 e0100000 00100000>; + reg = <e0100000 480>; + brg-frequency = <0>; + bus-frequency = <179A7B00>; + fsl,qe-snums = /bits/ 8 < + 0x04 0x05 0x0C 0x0D 0x14 0x15 0x1C 0x1D + 0x24 0x25 0x2C 0x2D 0x34 0x35 0x88 0x89 + 0x98 0x99 0xA8 0xA9 0xB8 0xB9 0xC8 0xC9 + 0xD8 0xD9 0xE8 0xE9>; + } + +* Multi-User RAM (MURAM) + +Required properties: +- compatible : should be "fsl,qe-muram", "fsl,cpm-muram". +- mode : the could be "host" or "slave". +- ranges : Should be defined as specified in 1) to describe the + translation of MURAM addresses. +- data-only : sub-node which defines the address area under MURAM + bus that can be allocated as data/parameter + +Example: + + muram@10000 { + compatible = "fsl,qe-muram", "fsl,cpm-muram"; + ranges = <0 00010000 0000c000>; + + data-only@0{ + compatible = "fsl,qe-muram-data", + "fsl,cpm-muram-data"; + reg = <0 c000>; + }; + }; + +* Interrupt Controller (IC) + +Required properties: +- compatible : should be "fsl,qe-ic". +- reg : Address range of IC register set. +- interrupts : interrupts generated by the device. +- interrupt-controller : this device is a interrupt controller. + +Example: + + qeic: interrupt-controller@80 { + interrupt-controller; + compatible = "fsl,qe-ic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <0x80 0x80>; + interrupts = <95 2 0 0 94 2 0 0>; + }; + +* Serial Interface Block (SI) + +The SI manages the routing of eight TDM lines to the QE block serial drivers +, the MCC and the UCCs, for receive and transmit. + +Required properties: +- compatible : must be "fsl,<chip>-qe-si". For t1040, must contain + "fsl,t1040-qe-si". +- reg : Address range of SI register set. + +Example: + + si1: si@700 { + compatible = "fsl,t1040-qe-si"; + reg = <0x700 0x80>; + }; + +* Serial Interface Block RAM(SIRAM) + +store the routing entries of SI + +Required properties: +- compatible : should be "fsl,<chip>-qe-siram". For t1040, must contain + "fsl,t1040-qe-siram". +- reg : Address range of SI RAM. + +Example: + + siram1: siram@1000 { + compatible = "fsl,t1040-qe-siram"; + reg = <0x1000 0x800>; + }; + +* QE Firmware Node + +This node defines a firmware binary that is embedded in the device tree, for +the purpose of passing the firmware from bootloader to the kernel, or from +the hypervisor to the guest. + +The firmware node itself contains the firmware binary contents, a compatible +property, and any firmware-specific properties. The node should be placed +inside a QE node that needs it. Doing so eliminates the need for a +fsl,firmware-phandle property. Other QE nodes that need the same firmware +should define an fsl,firmware-phandle property that points to the firmware node +in the first QE node. + +The fsl,firmware property can be specified in the DTS (possibly using incbin) +or can be inserted by the boot loader at boot time. + +Required properties: + - compatible + Usage: required + Value type: <string> + Definition: A standard property. Specify a string that indicates what + kind of firmware it is. For QE, this should be "fsl,qe-firmware". + + - fsl,firmware + Usage: required + Value type: <prop-encoded-array>, encoded as an array of bytes + Definition: A standard property. This property contains the firmware + binary "blob". + +Example: + qe1@e0080000 { + compatible = "fsl,qe"; + qe_firmware:qe-firmware { + compatible = "fsl,qe-firmware"; + fsl,firmware = [0x70 0xcd 0x00 0x00 0x01 0x46 0x45 ...]; + }; + ... + }; + + qe2@e0090000 { + compatible = "fsl,qe"; + fsl,firmware-phandle = <&qe_firmware>; + ... + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/firmware.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/firmware.txt new file mode 100644 index 0000000000..249db3a15d --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/firmware.txt @@ -0,0 +1,24 @@ +* Uploaded QE firmware + + If a new firmware has been uploaded to the QE (usually by the + boot loader), then a 'firmware' child node should be added to the QE + node. This node provides information on the uploaded firmware that + device drivers may need. + + Required properties: + - id: The string name of the firmware. This is taken from the 'id' + member of the qe_firmware structure of the uploaded firmware. + Device drivers can search this string to determine if the + firmware they want is already present. + - extended-modes: The Extended Modes bitfield, taken from the + firmware binary. It is a 64-bit number represented + as an array of two 32-bit numbers. + - virtual-traps: The virtual traps, taken from the firmware binary. + It is an array of 8 32-bit numbers. + +Example: + firmware { + id = "Soft-UART"; + extended-modes = <0 0>; + virtual-traps = <0 0 0 0 0 0 0 0>; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/par_io.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/par_io.txt new file mode 100644 index 0000000000..09b1b05fa6 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/par_io.txt @@ -0,0 +1,51 @@ +* Parallel I/O Ports + +This node configures Parallel I/O ports for CPUs with QE support. +The node should reside in the "soc" node of the tree. For each +device that using parallel I/O ports, a child node should be created. +See the definition of the Pin configuration nodes below for more +information. + +Required properties: +- device_type : should be "par_io". +- reg : offset to the register set and its length. +- num-ports : number of Parallel I/O ports + +Example: +par_io@1400 { + reg = <1400 100>; + #address-cells = <1>; + #size-cells = <0>; + device_type = "par_io"; + num-ports = <7>; + ucc_pin@1 { + ...... + }; + +Note that "par_io" nodes are obsolete, and should not be used for +the new device trees. Instead, each Par I/O bank should be represented +via its own gpio-controller node: + +Required properties: +- #gpio-cells : should be "2". +- compatible : should be "fsl,<chip>-qe-pario-bank", + "fsl,mpc8323-qe-pario-bank". +- reg : offset to the register set and its length. +- gpio-controller : node to identify gpio controllers. + +Example: + qe_pio_a: gpio-controller@1400 { + #gpio-cells = <2>; + compatible = "fsl,mpc8360-qe-pario-bank", + "fsl,mpc8323-qe-pario-bank"; + reg = <0x1400 0x18>; + gpio-controller; + }; + + qe_pio_e: gpio-controller@1460 { + #gpio-cells = <2>; + compatible = "fsl,mpc8360-qe-pario-bank", + "fsl,mpc8323-qe-pario-bank"; + reg = <0x1460 0x18>; + gpio-controller; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/pincfg.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/pincfg.txt new file mode 100644 index 0000000000..5bde8b98a8 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/pincfg.txt @@ -0,0 +1,57 @@ +* Pin configuration nodes + +Required properties: +- pio-map : array of pin configurations. Each pin is defined by 6 + integers. The six numbers are respectively: port, pin, dir, + open_drain, assignment, has_irq. + - port : port number of the pin; 0-6 represent port A-G in UM. + - pin : pin number in the port. + - dir : direction of the pin, should encode as follows: + + 0 = The pin is disabled + 1 = The pin is an output + 2 = The pin is an input + 3 = The pin is I/O + + - open_drain : indicates the pin is normal or wired-OR: + + 0 = The pin is actively driven as an output + 1 = The pin is an open-drain driver. As an output, the pin is + driven active-low, otherwise it is three-stated. + + - assignment : function number of the pin according to the Pin Assignment + tables in User Manual. Each pin can have up to 4 possible functions in + QE and two options for CPM. + - has_irq : indicates if the pin is used as source of external + interrupts. + +Example: + ucc_pin@1 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0 3 1 0 1 0 /* TxD0 */ + 0 4 1 0 1 0 /* TxD1 */ + 0 5 1 0 1 0 /* TxD2 */ + 0 6 1 0 1 0 /* TxD3 */ + 1 6 1 0 3 0 /* TxD4 */ + 1 7 1 0 1 0 /* TxD5 */ + 1 9 1 0 2 0 /* TxD6 */ + 1 a 1 0 2 0 /* TxD7 */ + 0 9 2 0 1 0 /* RxD0 */ + 0 a 2 0 1 0 /* RxD1 */ + 0 b 2 0 1 0 /* RxD2 */ + 0 c 2 0 1 0 /* RxD3 */ + 0 d 2 0 1 0 /* RxD4 */ + 1 1 2 0 2 0 /* RxD5 */ + 1 0 2 0 2 0 /* RxD6 */ + 1 4 2 0 2 0 /* RxD7 */ + 0 7 1 0 1 0 /* TX_EN */ + 0 8 1 0 1 0 /* TX_ER */ + 0 f 2 0 1 0 /* RX_DV */ + 0 10 2 0 1 0 /* RX_ER */ + 0 0 2 0 1 0 /* RX_CLK */ + 2 9 1 0 3 0 /* GTX_CLK - CLK10 */ + 2 8 2 0 1 0>; /* GTX125 - CLK9 */ + }; + + diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/ucc.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/ucc.txt new file mode 100644 index 0000000000..5efb7ac94c --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/ucc.txt @@ -0,0 +1,68 @@ +* UCC (Unified Communications Controllers) + +Required properties: +- device_type : should be "network", "hldc", "uart", "transparent" + "bisync", "atm", or "serial". +- compatible : could be "ucc_geth" or "fsl_atm" and so on. +- cell-index : the ucc number(1-8), corresponding to UCCx in UM. +- reg : Offset and length of the register set for the device +- interrupts : <a b> where a is the interrupt number and b is a + field that represents an encoding of the sense and level + information for the interrupt. This should be encoded based on + the information in section 2) depending on the type of interrupt + controller you have. +- pio-handle : The phandle for the Parallel I/O port configuration. +- port-number : for UART drivers, the port number to use, between 0 and 3. + This usually corresponds to the /dev/ttyQE device, e.g. <0> = /dev/ttyQE0. + The port number is added to the minor number of the device. Unlike the + CPM UART driver, the port-number is required for the QE UART driver. +- soft-uart : for UART drivers, if specified this means the QE UART device + driver should use "Soft-UART" mode, which is needed on some SOCs that have + broken UART hardware. Soft-UART is provided via a microcode upload. +- rx-clock-name: the UCC receive clock source + "none": clock source is disabled + "brg1" through "brg16": clock source is BRG1-BRG16, respectively + "clk1" through "clk24": clock source is CLK1-CLK24, respectively +- tx-clock-name: the UCC transmit clock source + "none": clock source is disabled + "brg1" through "brg16": clock source is BRG1-BRG16, respectively + "clk1" through "clk24": clock source is CLK1-CLK24, respectively +The following two properties are deprecated. rx-clock has been replaced +with rx-clock-name, and tx-clock has been replaced with tx-clock-name. +Drivers that currently use the deprecated properties should continue to +do so, in order to support older device trees, but they should be updated +to check for the new properties first. +- rx-clock : represents the UCC receive clock source. + 0x00 : clock source is disabled; + 0x1~0x10 : clock source is BRG1~BRG16 respectively; + 0x11~0x28: clock source is QE_CLK1~QE_CLK24 respectively. +- tx-clock: represents the UCC transmit clock source; + 0x00 : clock source is disabled; + 0x1~0x10 : clock source is BRG1~BRG16 respectively; + 0x11~0x28: clock source is QE_CLK1~QE_CLK24 respectively. + +Required properties for network device_type: +- mac-address : list of bytes representing the ethernet address. +- phy-handle : The phandle for the PHY connected to this controller. + +Recommended properties: +- phy-connection-type : a string naming the controller/PHY interface type, + i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id" (Internal + Delay), "rgmii-txid" (delay on TX only), "rgmii-rxid" (delay on RX only), + "tbi", or "rtbi". + +Example: + ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <1>; + reg = <2000 200>; + interrupts = <a0 0>; + interrupt-parent = <700>; + mac-address = [ 00 04 9f 00 23 23 ]; + rx-clock = "none"; + tx-clock = "clk9"; + phy-handle = <212000>; + phy-connection-type = "gmii"; + pio-handle = <140001>; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/usb.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/usb.txt new file mode 100644 index 0000000000..da13999337 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/usb.txt @@ -0,0 +1,36 @@ +Freescale QUICC Engine USB Controller + +Required properties: +- compatible : should be "fsl,<chip>-qe-usb", "fsl,mpc8323-qe-usb". +- reg : the first two cells should contain usb registers location and + length, the next two two cells should contain PRAM location and + length. +- interrupts : should contain USB interrupt. +- fsl,fullspeed-clock : specifies the full speed USB clock source: + "none": clock source is disabled + "brg1" through "brg16": clock source is BRG1-BRG16, respectively + "clk1" through "clk24": clock source is CLK1-CLK24, respectively +- fsl,lowspeed-clock : specifies the low speed USB clock source: + "none": clock source is disabled + "brg1" through "brg16": clock source is BRG1-BRG16, respectively + "clk1" through "clk24": clock source is CLK1-CLK24, respectively +- hub-power-budget : USB power budget for the root hub, in mA. +- gpios : should specify GPIOs in this order: USBOE, USBTP, USBTN, USBRP, + USBRN, SPEED (optional), and POWER (optional). + +Example: + +usb@6c0 { + compatible = "fsl,mpc8360-qe-usb", "fsl,mpc8323-qe-usb"; + reg = <0x6c0 0x40 0x8b00 0x100>; + interrupts = <11>; + interrupt-parent = <&qeic>; + fsl,fullspeed-clock = "clk21"; + gpios = <&qe_pio_b 2 0 /* USBOE */ + &qe_pio_b 3 0 /* USBTP */ + &qe_pio_b 8 0 /* USBTN */ + &qe_pio_b 9 0 /* USBRP */ + &qe_pio_b 11 0 /* USBRN */ + &qe_pio_e 20 0 /* SPEED */ + &qe_pio_e 21 0 /* POWER */>; +}; diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/serial.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/serial.txt new file mode 100644 index 0000000000..2ea76d9d13 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/serial.txt @@ -0,0 +1,32 @@ +* Serial + +Currently defined compatibles: +- fsl,cpm1-smc-uart +- fsl,cpm2-smc-uart +- fsl,cpm1-scc-uart +- fsl,cpm2-scc-uart +- fsl,qe-uart + +Modem control lines connected to GPIO controllers are listed in the gpios +property as described in booting-without-of.txt, section IX.1 in the following +order: + +CTS, RTS, DCD, DSR, DTR, and RI. + +The gpios property is optional and can be left out when control lines are +not used. + +Example: + + serial@11a00 { + device_type = "serial"; + compatible = "fsl,mpc8272-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <11a00 20 8000 100>; + interrupts = <28 8>; + interrupt-parent = <&PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <00800000>; + gpios = <&gpio_c 15 0 + &gpio_d 29 0>; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/uqe_serial.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/uqe_serial.txt new file mode 100644 index 0000000000..8823c86c80 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/uqe_serial.txt @@ -0,0 +1,17 @@ +* Serial + +Required Properties: +compatible : must be "fsl,<chip>-ucc-uart". For t1040, must be +"fsl,t1040-ucc-uart". +port-number : port number of UCC-UART +tx/rx-clock-name : should be "brg1"-"brg16" for internal clock source, + should be "clk1"-"clk28" for external clock source. + +Example: + + ucc_serial: ucc@2200 { + compatible = "fsl,t1040-ucc-uart"; + port-number = <0>; + rx-clock-name = "brg2"; + tx-clock-name = "brg2"; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml new file mode 100644 index 0000000000..397f75909b --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-dcfg.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/fsl/fsl,layerscape-dcfg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Layerscape Device Configuration Unit + +maintainers: + - Shawn Guo <shawnguo@kernel.org> + - Li Yang <leoyang.li@nxp.com> + +description: | + DCFG is the device configuration unit, that provides general purpose + configuration and status for the device. Such as setting the secondary + core start address and release the secondary core from holdoff and + startup. + +properties: + compatible: + oneOf: + - items: + - enum: + - fsl,ls1012a-dcfg + - fsl,ls1021a-dcfg + - fsl,ls1043a-dcfg + - fsl,ls1046a-dcfg + - fsl,ls1088a-dcfg + - fsl,ls2080a-dcfg + - fsl,lx2160a-dcfg + - const: syscon + + - items: + - enum: + - fsl,ls1028a-dcfg + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + little-endian: true + big-endian: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + ranges: true + +patternProperties: + "^clock-controller@[0-9a-z]+$": + $ref: /schemas/clock/fsl,flexspi-clock.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + syscon@1ee0000 { + compatible = "fsl,ls1021a-dcfg", "syscon"; + reg = <0x1ee0000 0x10000>; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml new file mode 100644 index 0000000000..8d088b5fe8 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/fsl/fsl,layerscape-scfg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Layerscape Supplemental Configuration Unit + +maintainers: + - Shawn Guo <shawnguo@kernel.org> + - Li Yang <leoyang.li@nxp.com> + +description: | + SCFG is the supplemental configuration unit, that provides SoC specific + configuration and status registers for the chip. Such as getting PEX port + status. + +properties: + compatible: + items: + - enum: + - fsl,ls1012a-scfg + - fsl,ls1021a-scfg + - fsl,ls1028a-scfg + - fsl,ls1043a-scfg + - fsl,ls1046a-scfg + - const: syscon + + reg: + maxItems: 1 + + little-endian: true + big-endian: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + ranges: true + +patternProperties: + "^interrupt-controller@[a-z0-9]+$": + $ref: /schemas/interrupt-controller/fsl,ls-extirq.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + syscon@1570000 { + compatible = "fsl,ls1021a-scfg", "syscon"; + reg = <0x1570000 0x10000>; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/guts.txt b/Documentation/devicetree/bindings/soc/fsl/guts.txt new file mode 100644 index 0000000000..07adca914d --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/guts.txt @@ -0,0 +1,44 @@ +* Global Utilities Block + +The global utilities block controls power management, I/O device +enabling, power-on-reset configuration monitoring, general-purpose +I/O signal configuration, alternate function selection for multiplexed +signals, and clock control. + +Required properties: + + - compatible : Should define the compatible device type for + global-utilities. + Possible compatibles: + "fsl,qoriq-device-config-1.0" + "fsl,qoriq-device-config-2.0" + "fsl,<chip>-device-config" + "fsl,<chip>-guts" + - reg : Offset and length of the register set for the device. + +Recommended properties: + + - fsl,has-rstcr : Indicates that the global utilities register set + contains a functioning "reset control register" (i.e. the board + is wired to reset upon setting the HRESET_REQ bit in this register). + + - fsl,liodn-bits : Indicates the number of defined bits in the LIODN + registers, for those SOCs that have a PAMU device. + + - little-endian : Indicates that the global utilities block is little + endian. The default is big endian. + +Examples: + global-utilities@e0000 { /* global utilities block */ + compatible = "fsl,mpc8548-guts"; + reg = <e0000 1000>; + fsl,has-rstcr; + }; + + guts: global-utilities@e0000 { + compatible = "fsl,qoriq-device-config-1.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + #sleep-cells = <1>; + fsl,liodn-bits = <12>; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt b/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt new file mode 100644 index 0000000000..5a34f3ab7b --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/qman-portals.txt @@ -0,0 +1,134 @@ +QorIQ DPAA Queue Manager Portals Device Tree Binding + +Copyright (C) 2008 - 2014 Freescale Semiconductor Inc. + +CONTENTS + + - QMan Portal + - Example + +QMan Portal Node + +Portals are memory mapped interfaces to QMan that allow low-latency, lock-less +interaction by software running on processor cores, accelerators and network +interfaces with the QMan + +PROPERTIES + +- compatible + Usage: Required + Value type: <stringlist> + Definition: Must include "fsl,qman-portal-<hardware revision>" + May include "fsl,<SoC>-qman-portal" or "fsl,qman-portal" + +- reg + Usage: Required + Value type: <prop-encoded-array> + Definition: Two regions. The first is the cache-enabled region of + the portal. The second is the cache-inhibited region of + the portal + +- interrupts + Usage: Required + Value type: <prop-encoded-array> + Definition: Standard property + +- fsl,liodn + Usage: See pamu.txt + Value type: <prop-encoded-array> + Definition: Two LIODN(s). DQRR LIODN (DLIODN) and Frame LIODN + (FLIODN) + +- fsl,iommu-parent + Usage: See pamu.txt + Value type: <phandle> + Definition: PAMU property used for dynamic LIODN assignment + + For additional details about the PAMU/LIODN binding(s) see pamu.txt + +- cell-index + Usage: Required + Value type: <u32> + Definition: The hardware index of the channel. This can also be + determined by dividing any of the channel's 8 work queue + IDs by 8 + +In addition to these properties the qman-portals should have sub-nodes to +represent the HW devices/portals that are connected to the software portal +described here + +The currently supported sub-nodes are: + * fman0 + * fman1 + * pme + * crypto + +These subnodes should have the following properties: + +- fsl,liodn + Usage: See pamu.txt + Value type: <prop-encoded-array> + Definition: PAMU property used for static LIODN assignment + +- fsl,iommu-parent + Usage: See pamu.txt + Value type: <phandle> + Definition: PAMU property used for dynamic LIODN assignment + +- dev-handle + Usage: Required + Value type: <phandle> + Definition: The phandle to the particular hardware device that this + portal is connected to. + +EXAMPLE + +The example below shows a (P4080) QMan portals container/bus node with two portals + + qman-portals@ff4200000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0xf 0xf4200000 0x200000>; + + qman-portal@0 { + compatible = "fsl,qman-portal-1.2.0", "fsl,qman-portal"; + reg = <0 0x4000>, <0x100000 0x1000>; + interrupts = <104 2 0 0>; + fsl,liodn = <1 2>; + fsl,qman-channel-id = <0>; + + fman0 { + fsl,liodn = <0x21>; + dev-handle = <&fman0>; + }; + fman1 { + fsl,liodn = <0xa1>; + dev-handle = <&fman1>; + }; + crypto { + fsl,liodn = <0x41 0x66>; + dev-handle = <&crypto>; + }; + }; + qman-portal@4000 { + compatible = "fsl,qman-portal-1.2.0", "fsl,qman-portal"; + reg = <0x4000 0x4000>, <0x101000 0x1000>; + interrupts = <106 2 0 0>; + fsl,liodn = <3 4>; + cell-index = <1>; + + fman0 { + fsl,liodn = <0x22>; + dev-handle = <&fman0>; + }; + fman1 { + fsl,liodn = <0xa2>; + dev-handle = <&fman1>; + }; + crypto { + fsl,liodn = <0x42 0x67>; + dev-handle = <&crypto>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/qman.txt b/Documentation/devicetree/bindings/soc/fsl/qman.txt new file mode 100644 index 0000000000..ee96afd2af --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/qman.txt @@ -0,0 +1,187 @@ +QorIQ DPAA Queue Manager Device Tree Binding + +Copyright (C) 2008 - 2014 Freescale Semiconductor Inc. + +CONTENTS + + - QMan Node + - QMan Private Memory Nodes + - Example + +QMan Node + +The Queue Manager is part of the Data-Path Acceleration Architecture (DPAA). QMan +supports queuing and QoS scheduling of frames to CPUs, network interfaces and +DPAA logic modules, maintains packet ordering within flows. Besides providing +flow-level queuing, is also responsible for congestion management functions such +as RED/WRED, congestion notifications and tail discards. This binding covers the +CCSR space programming model + +PROPERTIES + +- compatible + Usage: Required + Value type: <stringlist> + Definition: Must include "fsl,qman" + May include "fsl,<SoC>-qman" + +- reg + Usage: Required + Value type: <prop-encoded-array> + Definition: Registers region within the CCSR address space + +The QMan revision information is located in the QMAN_IP_REV_1/2 registers which +are located at offsets 0xbf8 and 0xbfc + +- interrupts + Usage: Required + Value type: <prop-encoded-array> + Definition: Standard property. The error interrupt + +- fsl,qman-portals + Usage: Required + Value type: <phandle> + Definition: Phandle to this QMan instance's portals + +- fsl,liodn + Usage: See pamu.txt + Value type: <prop-encoded-array> + Definition: PAMU property used for static LIODN assignment + +- fsl,iommu-parent + Usage: See pamu.txt + Value type: <phandle> + Definition: PAMU property used for dynamic LIODN assignment + + For additional details about the PAMU/LIODN binding(s) see pamu.txt + +- clocks + Usage: See clock-bindings.txt and qoriq-clock.txt + Value type: <prop-encoded-array> + Definition: Reference input clock. Its frequency is half of the + platform clock +- memory-regions + Usage: Required for ARM + Value type: <phandle array> + Definition: List of phandles referencing the QMan private memory + nodes (described below). The qman-fqd node must be + first followed by qman-pfdr node. Only used on ARM + +Devices connected to a QMan instance via Direct Connect Portals (DCP) must link +to the respective QMan instance + +- fsl,qman + Usage: Required + Value type: <prop-encoded-array> + Description: List of phandle and DCP index pairs, to the QMan instance + to which this device is connected via the DCP + +QMan Private Memory Nodes + +QMan requires two contiguous range of physical memory used for the backing store +for QMan Frame Queue Descriptor (FQD) and Packed Frame Descriptor Record (PFDR). +This memory is reserved/allocated as a node under the /reserved-memory node. + +For additional details about reserved memory regions see reserved-memory.txt + +The QMan FQD memory node must be named "qman-fqd" + +PROPERTIES + +- compatible + Usage: required + Value type: <stringlist> + Definition: PPC platforms: Must include "fsl,qman-fqd" + ARM platforms: Must include "shared-dma-pool" + as well as the "no-map" property + +The QMan PFDR memory node must be named "qman-pfdr" + +PROPERTIES + +- compatible + Usage: required + Value type: <stringlist> + Definition: PPC platforms: Must include "fsl,qman-pfdr" + ARM platforms: Must include "shared-dma-pool" + as well as the "no-map" property + +The following constraints are relevant to the FQD and PFDR private memory: + - The size must be 2^(size + 1), with size = 11..29. That is 4 KiB to + 1 GiB + - The alignment must be a muliptle of the memory size + +The size of the FQD and PFDP must be chosen by observing the hardware features +configured via the Reset Configuration Word (RCW) and that are relevant to a +specific board (e.g. number of MAC(s) pinned-out, number of offline/host command +FMan ports, etc.). The size configured in the DT must reflect the hardware +capabilities and not the specific needs of an application + +For additional details about reserved memory regions see reserved-memory.txt + +EXAMPLE + +The example below shows a QMan FQD and a PFDR dynamic allocation memory nodes + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + qman_fqd: qman-fqd { + compatible = "shared-dma-pool"; + size = <0 0x400000>; + alignment = <0 0x400000>; + no-map; + }; + qman_pfdr: qman-pfdr { + compatible = "shared-dma-pool"; + size = <0 0x2000000>; + alignment = <0 0x2000000>; + no-map; + }; + }; + +The example below shows a (P4080) QMan CCSR-space node + + qportals: qman-portals@ff4200000 { + ... + }; + + clockgen: global-utilities@e1000 { + ... + sysclk: sysclk { + ... + }; + ... + platform_pll: platform-pll@c00 { + #clock-cells = <1>; + reg = <0xc00 0x4>; + compatible = "fsl,qoriq-platform-pll-1.0"; + clocks = <&sysclk>; + clock-output-names = "platform-pll", "platform-pll-div2"; + }; + ... + }; + + crypto@300000 { + ... + fsl,qman = <&qman, 2>; + ... + }; + + qman: qman@318000 { + compatible = "fsl,qman"; + reg = <0x318000 0x1000>; + interrupts = <16 2 1 3> + fsl,liodn = <0x16>; + fsl,qman-portals = <&qportals>; + memory-region = <&qman_fqd &qman_pfdr>; + clocks = <&platform_pll 1>; + }; + + fman@400000 { + ... + fsl,qman = <&qman, 0>; + ... + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt new file mode 100644 index 0000000000..5a33619d88 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt @@ -0,0 +1,69 @@ +* Run Control and Power Management +------------------------------------------- +The RCPM performs all device-level tasks associated with device run control +and power management. + +Required properites: + - reg : Offset and length of the register set of the RCPM block. + - #fsl,rcpm-wakeup-cells : The number of IPPDEXPCR register cells in the + fsl,rcpm-wakeup property. + - compatible : Must contain a chip-specific RCPM block compatible string + and (if applicable) may contain a chassis-version RCPM compatible + string. Chip-specific strings are of the form "fsl,<chip>-rcpm", + such as: + * "fsl,p2041-rcpm" + * "fsl,p5020-rcpm" + * "fsl,t4240-rcpm" + + Chassis-version strings are of the form "fsl,qoriq-rcpm-<version>", + such as: + * "fsl,qoriq-rcpm-1.0": for chassis 1.0 rcpm + * "fsl,qoriq-rcpm-2.0": for chassis 2.0 rcpm + * "fsl,qoriq-rcpm-2.1": for chassis 2.1 rcpm + * "fsl,qoriq-rcpm-2.1+": for chassis 2.1+ rcpm + +All references to "1.0" and "2.0" refer to the QorIQ chassis version to +which the chip complies. +Chassis Version Example Chips +--------------- ------------------------------- +1.0 p4080, p5020, p5040, p2041, p3041 +2.0 t4240, b4860, b4420 +2.1 t1040, +2.1+ ls1021a, ls1012a, ls1043a, ls1046a + +Optional properties: + - little-endian : RCPM register block is Little Endian. Without it RCPM + will be Big Endian (default case). + +Example: +The RCPM node for T4240: + rcpm: global-utilities@e2000 { + compatible = "fsl,t4240-rcpm", "fsl,qoriq-rcpm-2.0"; + reg = <0xe2000 0x1000>; + #fsl,rcpm-wakeup-cells = <2>; + }; + +* Freescale RCPM Wakeup Source Device Tree Bindings +------------------------------------------- +Required fsl,rcpm-wakeup property should be added to a device node if the device +can be used as a wakeup source. + + - fsl,rcpm-wakeup: Consists of a phandle to the rcpm node and the IPPDEXPCR + register cells. The number of IPPDEXPCR register cells is defined in + "#fsl,rcpm-wakeup-cells" in the rcpm node. The first register cell is + the bit mask that should be set in IPPDEXPCR0, and the second register + cell is for IPPDEXPCR1, and so on. + + Note: IPPDEXPCR(IP Powerdown Exception Control Register) provides a + mechanism for keeping certain blocks awake during STANDBY and MEM, in + order to use them as wake-up sources. + +Example: + lpuart0: serial@2950000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2950000 0x0 0x1000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sysclk>; + clock-names = "ipg"; + fsl,rcpm-wakeup = <&rcpm 0x0 0x40000000>; + }; diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml new file mode 100644 index 0000000000..80d99861fe --- /dev/null +++ b/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,aips-bus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX AHB to IP Bridge + +maintainers: + - Peng Fan <peng.fan@nxp.com> + +description: | + This particular peripheral is designed as the bridge between + AHB bus and peripherals with the lower bandwidth IP Slave (IPS) + buses. + +select: + properties: + compatible: + contains: + const: fsl,aips-bus + required: + - compatible + +properties: + compatible: + items: + - const: fsl,aips-bus + - const: simple-bus + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: true + +examples: + - | + bus@30000000 { + compatible = "fsl,aips-bus", "simple-bus"; + reg = <0x30000000 0x400000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + }; +... diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml new file mode 100644 index 0000000000..1da1b758b4 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx-iomuxc-gpr.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx-iomuxc-gpr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale IOMUX Controller General Purpose Registers + +maintainers: + - Peng Fan <peng.fan@nxp.com> + +description: + i.MX Processors have an IOMUXC General Purpose Register group for + various System Settings + +properties: + compatible: + oneOf: + - items: + - const: fsl,imx8mq-iomuxc-gpr + - const: syscon + - const: simple-mfd + - items: + - enum: + - fsl,imx8mm-iomuxc-gpr + - fsl,imx8mn-iomuxc-gpr + - fsl,imx8mp-iomuxc-gpr + - const: syscon + + reg: + maxItems: 1 + + mux-controller: + type: object + $ref: /schemas/mux/reg-mux.yaml + +additionalProperties: false + +required: + - compatible + - reg + +examples: + # Pinmux controller node + - | + iomuxc_gpr: syscon@30340000 { + compatible = "fsl,imx8mq-iomuxc-gpr", "syscon", "simple-mfd"; + reg = <0x30340000 0x10000>; + + mux: mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x34 0x00000004>; /* MIPI_MUX_SEL */ + }; + }; + +... diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml new file mode 100644 index 0000000000..a02a09d574 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8MM DISP blk-ctrl + +maintainers: + - Lucas Stach <l.stach@pengutronix.de> + +description: + The i.MX8MM DISP blk-ctrl is a top-level peripheral providing access to + the NoC and ensuring proper power sequencing of the display and MIPI CSI + peripherals located in the DISP domain of the SoC. + +properties: + compatible: + items: + - const: fsl,imx8mm-disp-blk-ctrl + - const: syscon + + reg: + maxItems: 1 + + '#power-domain-cells': + const: 1 + + power-domains: + minItems: 5 + maxItems: 5 + + power-domain-names: + items: + - const: bus + - const: csi-bridge + - const: lcdif + - const: mipi-dsi + - const: mipi-csi + + clocks: + minItems: 10 + maxItems: 10 + + clock-names: + items: + - const: csi-bridge-axi + - const: csi-bridge-apb + - const: csi-bridge-core + - const: lcdif-axi + - const: lcdif-apb + - const: lcdif-pix + - const: dsi-pclk + - const: dsi-ref + - const: csi-aclk + - const: csi-pclk + +required: + - compatible + - reg + - power-domains + - power-domain-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mm-clock.h> + #include <dt-bindings/power/imx8mm-power.h> + + blk-ctrl@32e28000 { + compatible = "fsl,imx8mm-disp-blk-ctrl", "syscon"; + reg = <0x32e28000 0x100>; + power-domains = <&pgc_dispmix>, <&pgc_dispmix>, <&pgc_dispmix>, + <&pgc_mipi>, <&pgc_mipi>; + power-domain-names = "bus", "csi-bridge", "lcdif", + "mipi-dsi", "mipi-csi"; + clocks = <&clk IMX8MM_CLK_DISP_AXI_ROOT>, + <&clk IMX8MM_CLK_DISP_APB_ROOT>, + <&clk IMX8MM_CLK_CSI1_ROOT>, + <&clk IMX8MM_CLK_DISP_AXI_ROOT>, + <&clk IMX8MM_CLK_DISP_APB_ROOT>, + <&clk IMX8MM_CLK_DISP_ROOT>, + <&clk IMX8MM_CLK_DSI_CORE>, + <&clk IMX8MM_CLK_DSI_PHY_REF>, + <&clk IMX8MM_CLK_CSI1_CORE>, + <&clk IMX8MM_CLK_CSI1_PHY_REF>; + clock-names = "csi-bridge-axi", "csi-bridge-apb", "csi-bridge-core", + "lcdif-axi", "lcdif-apb", "lcdif-pix", "dsi-pclk", + "dsi-ref", "csi-aclk", "csi-pclk"; + #power-domain-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml new file mode 100644 index 0000000000..25109376d7 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml @@ -0,0 +1,164 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8MM VPU blk-ctrl + +maintainers: + - Lucas Stach <l.stach@pengutronix.de> + +description: + The i.MX8MM VPU blk-ctrl is a top-level peripheral providing access to + the NoC and ensuring proper power sequencing of the VPU peripherals + located in the VPU domain of the SoC. + +properties: + compatible: + items: + - const: fsl,imx8mm-vpu-blk-ctrl + - const: syscon + + reg: + maxItems: 1 + + '#power-domain-cells': + const: 1 + + power-domains: + maxItems: 4 + + power-domain-names: + maxItems: 4 + + clocks: + maxItems: 3 + + clock-names: + maxItems: 3 + + interconnects: + maxItems: 3 + + interconnect-names: + maxItems: 3 + +required: + - compatible + - reg + - power-domains + - power-domain-names + - clocks + - clock-names + +allOf: + - if: + properties: + compatible: + contains: + const: fsl,imx8mm-vpu-blk-ctrl + then: + properties: + power-domains: + items: + - description: bus power domain + - description: G1 decoder power domain + - description: G2 decoder power domain + - description: H1 encoder power domain + + power-domain-names: + items: + - const: bus + - const: g1 + - const: g2 + - const: h1 + + clocks: + items: + - description: G1 decoder clk + - description: G2 decoder clk + - description: H1 encoder clk + + clock-names: + items: + - const: g1 + - const: g2 + - const: h1 + + interconnects: + items: + - description: G1 decoder interconnect + - description: G2 decoder interconnect + - description: H1 encoder power domain + + interconnect-names: + items: + - const: g1 + - const: g2 + - const: h1 + + - if: + properties: + compatible: + contains: + const: fsl,imx8mp-vpu-blk-ctrl + then: + properties: + power-domains: + items: + - description: bus power domain + - description: G1 decoder power domain + - description: G2 decoder power domain + - description: VC8000E encoder power domain + + power-domain-names: + items: + - const: bus + - const: g1 + - const: g2 + - const: vc8000e + + clocks: + items: + - description: G1 decoder clk + - description: G2 decoder clk + - description: VC8000E encoder clk + + clock-names: + items: + - const: g1 + - const: g2 + - const: vc8000e + + interconnects: + items: + - description: G1 decoder interconnect + - description: G2 decoder interconnect + - description: VC8000E encoder interconnect + + interconnect-names: + items: + - const: g1 + - const: g2 + - const: vc8000e + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mm-clock.h> + #include <dt-bindings/power/imx8mm-power.h> + + blk-ctrl@38330000 { + compatible = "fsl,imx8mm-vpu-blk-ctrl", "syscon"; + reg = <0x38330000 0x100>; + power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>, + <&pgc_vpu_g2>, <&pgc_vpu_h1>; + power-domain-names = "bus", "g1", "g2", "h1"; + clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>, + <&clk IMX8MM_CLK_VPU_G2_ROOT>, + <&clk IMX8MM_CLK_VPU_H1_ROOT>; + clock-names = "g1", "g2", "h1"; + #power-domain-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml new file mode 100644 index 0000000000..eeec9965b0 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mn-disp-blk-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8MN DISP blk-ctrl + +maintainers: + - Lucas Stach <l.stach@pengutronix.de> + +description: + The i.MX8MN DISP blk-ctrl is a top-level peripheral providing access to + the NoC and ensuring proper power sequencing of the display and MIPI CSI + peripherals located in the DISP domain of the SoC. + +properties: + compatible: + items: + - const: fsl,imx8mn-disp-blk-ctrl + - const: syscon + + reg: + maxItems: 1 + + '#power-domain-cells': + const: 1 + + power-domains: + minItems: 5 + maxItems: 5 + + power-domain-names: + items: + - const: bus + - const: isi + - const: lcdif + - const: mipi-dsi + - const: mipi-csi + + clocks: + minItems: 11 + maxItems: 11 + + clock-names: + items: + - const: disp_axi + - const: disp_apb + - const: disp_axi_root + - const: disp_apb_root + - const: lcdif-axi + - const: lcdif-apb + - const: lcdif-pix + - const: dsi-pclk + - const: dsi-ref + - const: csi-aclk + - const: csi-pclk + +required: + - compatible + - reg + - power-domains + - power-domain-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mn-clock.h> + #include <dt-bindings/power/imx8mn-power.h> + + blk-ctrl@32e28000 { + compatible = "fsl,imx8mn-disp-blk-ctrl", "syscon"; + reg = <0x32e28000 0x100>; + power-domains = <&pgc_dispmix>, <&pgc_dispmix>, + <&pgc_dispmix>, <&pgc_mipi>, + <&pgc_mipi>; + power-domain-names = "bus", "isi", "lcdif", "mipi-dsi", + "mipi-csi"; + clocks = <&clk IMX8MN_CLK_DISP_AXI>, + <&clk IMX8MN_CLK_DISP_APB>, + <&clk IMX8MN_CLK_DISP_AXI_ROOT>, + <&clk IMX8MN_CLK_DISP_APB_ROOT>, + <&clk IMX8MN_CLK_DISP_AXI_ROOT>, + <&clk IMX8MN_CLK_DISP_APB_ROOT>, + <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>, + <&clk IMX8MN_CLK_DSI_CORE>, + <&clk IMX8MN_CLK_DSI_PHY_REF>, + <&clk IMX8MN_CLK_CSI1_PHY_REF>, + <&clk IMX8MN_CLK_CAMERA_PIXEL_ROOT>; + clock-names = "disp_axi", "disp_apb", "disp_axi_root", "disp_apb_root", + "lcdif-axi", "lcdif-apb", "lcdif-pix", "dsi-pclk", + "dsi-ref", "csi-aclk", "csi-pclk"; + #power-domain-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml new file mode 100644 index 0000000000..1be4ce2a45 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mp-hdmi-blk-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8MP HDMI blk-ctrl + +maintainers: + - Lucas Stach <l.stach@pengutronix.de> + +description: + The i.MX8MP HDMMI blk-ctrl is a top-level peripheral providing access to + the NoC and ensuring proper power sequencing of the display pipeline + peripherals located in the HDMI domain of the SoC. + +properties: + compatible: + items: + - const: fsl,imx8mp-hdmi-blk-ctrl + - const: syscon + + reg: + maxItems: 1 + + '#power-domain-cells': + const: 1 + + power-domains: + minItems: 8 + maxItems: 8 + + power-domain-names: + items: + - const: bus + - const: irqsteer + - const: lcdif + - const: pai + - const: pvi + - const: trng + - const: hdmi-tx + - const: hdmi-tx-phy + + clocks: + minItems: 4 + maxItems: 4 + + clock-names: + items: + - const: apb + - const: axi + - const: ref_266m + - const: ref_24m + + interconnects: + maxItems: 3 + + interconnect-names: + items: + - const: hrv + - const: lcdif-hdmi + - const: hdcp + +required: + - compatible + - reg + - power-domains + - power-domain-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mp-clock.h> + #include <dt-bindings/power/imx8mp-power.h> + + blk-ctrl@32fc0000 { + compatible = "fsl,imx8mp-hdmi-blk-ctrl", "syscon"; + reg = <0x32fc0000 0x23c>; + clocks = <&clk IMX8MP_CLK_HDMI_APB>, + <&clk IMX8MP_CLK_HDMI_ROOT>, + <&clk IMX8MP_CLK_HDMI_REF_266M>, + <&clk IMX8MP_CLK_HDMI_24M>; + clock-names = "apb", "axi", "ref_266m", "ref_24m"; + power-domains = <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>, + <&pgc_hdmimix>, <&pgc_hdmimix>, <&pgc_hdmimix>, + <&pgc_hdmimix>, <&pgc_hdmi_phy>; + power-domain-names = "bus", "irqsteer", "lcdif", "pai", "pvi", "trng", + "hdmi-tx", "hdmi-tx-phy"; + #power-domain-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml new file mode 100644 index 0000000000..4214c1ab49 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mp-hsio-blk-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8MP HSIO blk-ctrl + +maintainers: + - Lucas Stach <l.stach@pengutronix.de> + +description: + The i.MX8MP HSIO blk-ctrl is a top-level peripheral providing access to + the NoC and ensuring proper power sequencing of the high-speed IO + (USB an PCIe) peripherals located in the HSIO domain of the SoC. + +properties: + compatible: + items: + - const: fsl,imx8mp-hsio-blk-ctrl + - const: syscon + + reg: + maxItems: 1 + + '#power-domain-cells': + const: 1 + + power-domains: + minItems: 6 + maxItems: 6 + + power-domain-names: + items: + - const: bus + - const: usb + - const: usb-phy1 + - const: usb-phy2 + - const: pcie + - const: pcie-phy + + '#clock-cells': + const: 0 + + clocks: + minItems: 2 + maxItems: 2 + + clock-names: + items: + - const: usb + - const: pcie + + interconnects: + maxItems: 4 + + interconnect-names: + items: + - const: noc-pcie + - const: usb1 + - const: usb2 + - const: pcie + +required: + - compatible + - reg + - power-domains + - power-domain-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mp-clock.h> + #include <dt-bindings/power/imx8mp-power.h> + + blk-ctrl@32f10000 { + compatible = "fsl,imx8mp-hsio-blk-ctrl", "syscon"; + reg = <0x32f10000 0x24>; + clocks = <&clk IMX8MP_CLK_USB_ROOT>, + <&clk IMX8MP_CLK_PCIE_ROOT>; + clock-names = "usb", "pcie"; + power-domains = <&pgc_hsiomix>, <&pgc_hsiomix>, + <&pgc_usb1_phy>, <&pgc_usb2_phy>, + <&pgc_hsiomix>, <&pgc_pcie_phy>; + power-domain-names = "bus", "usb", "usb-phy1", + "usb-phy2", "pcie", "pcie-phy"; + #power-domain-cells = <1>; + #clock-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml new file mode 100644 index 0000000000..ea9aa876ed --- /dev/null +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml @@ -0,0 +1,169 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mp-media-blk-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8MP Media Block Control + +maintainers: + - Paul Elder <paul.elder@ideasonboard.com> + +description: + The i.MX8MP Media Block Control (MEDIA BLK_CTRL) is a top-level peripheral + providing access to the NoC and ensuring proper power sequencing of the + peripherals within the MEDIAMIX domain. + +properties: + compatible: + items: + - const: fsl,imx8mp-media-blk-ctrl + - const: syscon + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + power-domains: + maxItems: 10 + + power-domain-names: + items: + - const: bus + - const: mipi-dsi1 + - const: mipi-csi1 + - const: lcdif1 + - const: isi + - const: mipi-csi2 + - const: lcdif2 + - const: isp + - const: dwe + - const: mipi-dsi2 + + clocks: + items: + - description: The APB clock + - description: The AXI clock + - description: The pixel clock for the first CSI2 receiver (aclk) + - description: The pixel clock for the second CSI2 receiver (aclk) + - description: The pixel clock for the first LCDIF (pix_clk) + - description: The pixel clock for the second LCDIF (pix_clk) + - description: The core clock for the ISP (clk) + - description: The MIPI-PHY reference clock used by DSI + + clock-names: + items: + - const: apb + - const: axi + - const: cam1 + - const: cam2 + - const: disp1 + - const: disp2 + - const: isp + - const: phy + + interconnects: + maxItems: 8 + + interconnect-names: + items: + - const: lcdif-rd + - const: lcdif-wr + - const: isi0 + - const: isi1 + - const: isi2 + - const: isp0 + - const: isp1 + - const: dwe + + bridge@5c: + type: object + $ref: /schemas/display/bridge/fsl,ldb.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - '#address-cells' + - '#size-cells' + - '#power-domain-cells' + - power-domains + - power-domain-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mp-clock.h> + #include <dt-bindings/power/imx8mp-power.h> + + blk-ctrl@32ec0000 { + compatible = "fsl,imx8mp-media-blk-ctrl", "syscon"; + reg = <0x32ec0000 0x138>; + power-domains = <&mediamix_pd>, <&mipi_phy1_pd>, <&mipi_phy1_pd>, + <&mediamix_pd>, <&mediamix_pd>, <&mipi_phy2_pd>, + <&mediamix_pd>, <&ispdwp_pd>, <&ispdwp_pd>, + <&mipi_phy2_pd>; + power-domain-names = "bus", "mipi-dsi1", "mipi-csi1", "lcdif1", "isi", + "mipi-csi2", "lcdif2", "isp", "dwe", "mipi-dsi2"; + clocks = <&clk IMX8MP_CLK_MEDIA_APB_ROOT>, + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, + <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_CAM2_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_DISP1_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_DISP2_PIX_ROOT>, + <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>, + <&clk IMX8MP_CLK_MEDIA_MIPI_PHY1_REF_ROOT>; + clock-names = "apb", "axi", "cam1", "cam2", "disp1", "disp2", + "isp", "phy"; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + + bridge@5c { + compatible = "fsl,imx8mp-ldb"; + reg = <0x5c 0x4>, <0x128 0x4>; + reg-names = "ldb", "lvds"; + clocks = <&clk IMX8MP_CLK_MEDIA_LDB>; + clock-names = "ldb"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + ldb_from_lcdif2: endpoint { + remote-endpoint = <&lcdif2_to_ldb>; + }; + }; + + port@1 { + reg = <1>; + + ldb_lvds_ch0: endpoint { + remote-endpoint = <&ldb_to_lvdsx4panel>; + }; + }; + + port@2 { + reg = <2>; + + ldb_lvds_ch1: endpoint { + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mq-vpu-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mq-vpu-blk-ctrl.yaml new file mode 100644 index 0000000000..ea5c90c6a1 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mq-vpu-blk-ctrl.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mq-vpu-blk-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8MQ VPU blk-ctrl + +maintainers: + - Lucas Stach <l.stach@pengutronix.de> + +description: + The i.MX8MQ VPU blk-ctrl is a top-level peripheral providing access to + the NoC and ensuring proper power sequencing of the VPU peripherals + located in the VPU domain of the SoC. + +properties: + compatible: + items: + - const: fsl,imx8mq-vpu-blk-ctrl + + reg: + maxItems: 1 + + '#power-domain-cells': + const: 1 + + power-domains: + minItems: 3 + maxItems: 3 + + power-domain-names: + items: + - const: bus + - const: g1 + - const: g2 + + clocks: + minItems: 2 + maxItems: 2 + + clock-names: + items: + - const: g1 + - const: g2 + +required: + - compatible + - reg + - power-domains + - power-domain-names + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mq-clock.h> + #include <dt-bindings/power/imx8mq-power.h> + + blk-ctrl@38320000 { + compatible = "fsl,imx8mq-vpu-blk-ctrl"; + reg = <0x38320000 0x100>; + power-domains = <&pgc_vpu>, <&pgc_vpu>, <&pgc_vpu>; + power-domain-names = "bus", "g1", "g2"; + clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>, + <&clk IMX8MQ_CLK_VPU_G2_ROOT>; + clock-names = "g1", "g2"; + #power-domain-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml new file mode 100644 index 0000000000..b3554e7f9e --- /dev/null +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx93-media-blk-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX93 Media blk-ctrl + +maintainers: + - Peng Fan <peng.fan@nxp.com> + +description: + The i.MX93 MEDIAMIX domain contains control and status registers known + as MEDIAMIX Block Control (MEDIAMIX BLK_CTRL). These registers include + clocking, reset, and miscellaneous top-level controls for peripherals + within the MEDIAMIX domain + +properties: + compatible: + items: + - const: fsl,imx93-media-blk-ctrl + - const: syscon + + reg: + maxItems: 1 + + '#power-domain-cells': + const: 1 + + power-domains: + maxItems: 1 + + clocks: + maxItems: 10 + + clock-names: + items: + - const: apb + - const: axi + - const: nic + - const: disp + - const: cam + - const: pxp + - const: lcdif + - const: isi + - const: csi + - const: dsi + +required: + - compatible + - reg + - power-domains + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx93-clock.h> + #include <dt-bindings/power/fsl,imx93-power.h> + + system-controller@4ac10000 { + compatible = "fsl,imx93-media-blk-ctrl", "syscon"; + reg = <0x4ac10000 0x10000>; + power-domains = <&mediamix>; + clocks = <&clk IMX93_CLK_MEDIA_APB>, + <&clk IMX93_CLK_MEDIA_AXI>, + <&clk IMX93_CLK_NIC_MEDIA_GATE>, + <&clk IMX93_CLK_MEDIA_DISP_PIX>, + <&clk IMX93_CLK_CAM_PIX>, + <&clk IMX93_CLK_PXP_GATE>, + <&clk IMX93_CLK_LCDIF_GATE>, + <&clk IMX93_CLK_ISI_GATE>, + <&clk IMX93_CLK_MIPI_CSI_GATE>, + <&clk IMX93_CLK_MIPI_DSI_GATE>; + clock-names = "apb", "axi", "nic", "disp", "cam", + "pxp", "lcdif", "isi", "csi", "dsi"; + #power-domain-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-src.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-src.yaml new file mode 100644 index 0000000000..9ce8d8b427 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-src.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/fsl,imx93-src.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX93 System Reset Controller + +maintainers: + - Peng Fan <peng.fan@nxp.com> + +description: | + The System Reset Controller (SRC) is responsible for the generation of + all the system reset signals and boot argument latching. + + Its main functions are as follows, + - Deals with all global system reset sources from other modules, + and generates global system reset. + - Responsible for power gating of MIXs (Slices) and their memory + low power control. + +properties: + compatible: + items: + - const: fsl,imx93-src + - const: syscon + + reg: + maxItems: 1 + + ranges: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + +patternProperties: + "power-domain@[0-9a-f]+$": + type: object + additionalProperties: false + + properties: + compatible: + items: + - const: fsl,imx93-src-slice + + '#power-domain-cells': + const: 0 + + reg: + items: + - description: mix slice register region + - description: mem slice register region + + clocks: + description: | + A number of phandles to clocks that need to be enabled + during domain power-up sequencing to ensure reset + propagation into devices located inside this power domain. + minItems: 1 + maxItems: 5 + + required: + - compatible + - '#power-domain-cells' + - reg + +required: + - compatible + - reg + - ranges + - '#address-cells' + - '#size-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx93-clock.h> + + system-controller@44460000 { + compatible = "fsl,imx93-src", "syscon"; + reg = <0x44460000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mediamix: power-domain@0 { + compatible = "fsl,imx93-src-slice"; + reg = <0x44462400 0x400>, <0x44465800 0x400>; + #power-domain-cells = <0>; + clocks = <&clk IMX93_CLK_MEDIA_AXI>, + <&clk IMX93_CLK_MEDIA_APB>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml b/Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml new file mode 100644 index 0000000000..effcc72f94 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/imx/imx8m-soc.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/imx/imx8m-soc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX8M Series SoC + +maintainers: + - Alice Guo <alice.guo@nxp.com> + +description: | + NXP i.MX8M series SoCs contain fuse entries from which SoC Unique ID can be + obtained. + +select: + properties: + compatible: + contains: + enum: + - fsl,imx8mm + - fsl,imx8mn + - fsl,imx8mp + - fsl,imx8mq + required: + - compatible + +patternProperties: + "^soc@[0-9a-f]+$": + type: object + properties: + compatible: + items: + - enum: + - fsl,imx8mm-soc + - fsl,imx8mn-soc + - fsl,imx8mp-soc + - fsl,imx8mq-soc + - const: simple-bus + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + + dma-ranges: true + + nvmem-cells: + maxItems: 1 + description: Phandle to the SOC Unique ID provided by a nvmem node + + nvmem-cell-names: + const: soc_unique_id + + required: + - compatible + - nvmem-cells + - nvmem-cell-names + + additionalProperties: + type: object + +additionalProperties: true + +examples: + - | + / { + model = "FSL i.MX8MM EVK board"; + compatible = "fsl,imx8mm-evk", "fsl,imx8mm"; + #address-cells = <2>; + #size-cells = <2>; + + soc@0 { + compatible = "fsl,imx8mm-soc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x3e000000>; + nvmem-cells = <&imx8mm_uid>; + nvmem-cell-names = "soc_unique_id"; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml b/Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml new file mode 100644 index 0000000000..ceb81646fe --- /dev/null +++ b/Documentation/devicetree/bindings/soc/intel/intel,hps-copy-engine.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (C) 2022, Intel Corporation +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/intel/intel,hps-copy-engine.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel HPS Copy Engine + +maintainers: + - Matthew Gerlach <matthew.gerlach@linux.intel.com> + +description: | + The Intel Hard Processor System (HPS) Copy Engine is an IP block used to copy + a bootable image from host memory to HPS DDR. Additionally, there is a + register the HPS can use to indicate the state of booting the copied image as + well as a keep-a-live indication to the host. + +properties: + compatible: + const: intel,hps-copy-engine + + '#dma-cells': + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + bus@80000000 { + compatible = "simple-bus"; + reg = <0x80000000 0x60000000>, + <0xf9000000 0x00100000>; + reg-names = "axi_h2f", "axi_h2f_lw"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0xf9000000 0x00001000>; + + dma-controller@0 { + compatible = "intel,hps-copy-engine"; + reg = <0x00000000 0x00000000 0x00001000>; + #dma-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml new file mode 100644 index 0000000000..a64406ca17 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +# Copyright 2020 Antmicro <www.antmicro.com> +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/litex/litex,soc-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LiteX SoC Controller driver + +description: | + This is the SoC Controller driver for the LiteX SoC Builder. + Its purpose is to verify LiteX CSR (Control&Status Register) access + operations and provide functions for other drivers to read/write CSRs + and to check if those accessors are ready to be used. + +maintainers: + - Karol Gugala <kgugala@antmicro.com> + - Mateusz Holenko <mholenko@antmicro.com> + +properties: + compatible: + const: litex,soc-controller + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + soc_ctrl0: soc-controller@f0000000 { + compatible = "litex,soc-controller"; + reg = <0xf0000000 0xc>; + }; + +... diff --git a/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml b/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml new file mode 100644 index 0000000000..510f6cb0f0 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/loongson/loongson,ls2k-pmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson-2 Power Manager controller + +maintainers: + - Yinbo Zhu <zhuyinbo@loongson.cn> + +properties: + compatible: + oneOf: + - items: + - const: loongson,ls2k0500-pmc + - const: syscon + - items: + - enum: + - loongson,ls2k1000-pmc + - loongson,ls2k2000-pmc + - const: loongson,ls2k0500-pmc + - const: syscon + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + loongson,suspend-address: + $ref: /schemas/types.yaml#/definitions/uint64 + description: + The "loongson,suspend-address" is a deep sleep state (Suspend To + RAM) firmware entry address which was jumped from kernel and it's + value was dependent on specific platform firmware code. In + addition, the PM need according to it to indicate that current + SoC whether support Suspend To RAM. + + syscon-poweroff: + $ref: /schemas/power/reset/syscon-poweroff.yaml# + type: object + description: + Node for power off method + + syscon-reboot: + $ref: /schemas/power/reset/syscon-reboot.yaml# + type: object + description: + Node for reboot method + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + power-management@1fe27000 { + compatible = "loongson,ls2k1000-pmc", "loongson,ls2k0500-pmc", "syscon"; + reg = <0x1fe27000 0x58>; + interrupt-parent = <&liointc1>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + loongson,suspend-address = <0x0 0x1c000500>; + + syscon-reboot { + compatible = "syscon-reboot"; + offset = <0x30>; + mask = <0x1>; + }; + + syscon-poweroff { + compatible = "syscon-poweroff"; + regmap = <&pmc>; + offset = <0x14>; + mask = <0x3c00>; + value = <0x3c00>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/mediatek/devapc.yaml b/Documentation/devicetree/bindings/soc/mediatek/devapc.yaml new file mode 100644 index 0000000000..99e2caafea --- /dev/null +++ b/Documentation/devicetree/bindings/soc/mediatek/devapc.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# # Copyright 2020 MediaTek Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/mediatek/devapc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Device Access Permission Control driver + +description: | + MediaTek bus fabric provides TrustZone security support and data + protection to prevent slaves from being accessed by unexpected masters. + The security violation is logged and sent to the processor for further + analysis and countermeasures. + +maintainers: + - Neal Liu <neal.liu@mediatek.com> + +properties: + compatible: + enum: + - mediatek,mt6779-devapc + - mediatek,mt8186-devapc + + reg: + description: The base address of devapc register bank + maxItems: 1 + + interrupts: + description: A single interrupt specifier + maxItems: 1 + + clocks: + description: Contains module clock source and clock names + maxItems: 1 + + clock-names: + description: Names of the clocks list in clocks property + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt6779-clk.h> + + devapc: devapc@10207000 { + compatible = "mediatek,mt6779-devapc"; + reg = <0x10207000 0x1000>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg_ao CLK_INFRA_DEVICE_APC>; + clock-names = "devapc-infra-clock"; + }; diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,ccorr.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,ccorr.yaml new file mode 100644 index 0000000000..4380b98b0d --- /dev/null +++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,ccorr.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/mediatek/mediatek,ccorr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek color correction + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + - Moudy Ho <moudy.ho@mediatek.com> + +description: | + MediaTek color correction with 3X3 matrix. + +properties: + compatible: + items: + - enum: + - mediatek,mt8183-mdp3-ccorr + + reg: + maxItems: 1 + + mediatek,gce-client-reg: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + description: The register of client driver can be configured by gce with + 4 arguments defined in this property. Each GCE subsys id is mapping to + a client defined in the header include/dt-bindings/gce/<chip>-gce.h. + + mediatek,gce-events: + description: + The event id which is mapping to the specific hardware event signal + to gce. The event id is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/uint32-array + + clocks: + minItems: 1 + +required: + - compatible + - reg + - mediatek,gce-client-reg + - mediatek,gce-events + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8183-clk.h> + #include <dt-bindings/gce/mt8183-gce.h> + + mdp3_ccorr: mdp3-ccorr@1401c000 { + compatible = "mediatek,mt8183-mdp3-ccorr"; + reg = <0x1401c000 0x1000>; + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xc000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_MDP_CCORR_SOF>, + <CMDQ_EVENT_MDP_CCORR_EOF>; + clocks = <&mmsys CLK_MM_MDP_CCORR>; + }; diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml new file mode 100644 index 0000000000..f0fa92b04b --- /dev/null +++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mt7986-wo-ccif.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/mediatek/mediatek,mt7986-wo-ccif.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Wireless Ethernet Dispatch (WED) WO controller interface for MT7986 + +maintainers: + - Lorenzo Bianconi <lorenzo@kernel.org> + - Felix Fietkau <nbd@nbd.name> + +description: + The MediaTek wo-ccif provides a configuration interface for WED WO + controller used to perform offload rx packet processing (e.g. 802.11 + aggregation packet reordering or rx header translation) on MT7986 soc. + +properties: + compatible: + items: + - enum: + - mediatek,mt7986-wo-ccif + - const: syscon + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + + syscon@151a5000 { + compatible = "mediatek,mt7986-wo-ccif", "syscon"; + reg = <0 0x151a5000 0 0x1000>; + interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml new file mode 100644 index 0000000000..ba2014a872 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/mediatek/mediatek,mutex.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek mutex + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: | + Mediatek mutex, namely MUTEX, is used to send the triggers signals called + Start Of Frame (SOF) / End Of Frame (EOF) to each sub-modules on the display + data path or MDP data path. + In some SoC, such as mt2701, MUTEX could be a hardware mutex which protects + the shadow register. + MUTEX device node must be siblings to the central MMSYS_CONFIG node. + For a description of the MMSYS_CONFIG binding, see + Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml + for details. + +properties: + compatible: + enum: + - mediatek,mt2701-disp-mutex + - mediatek,mt2712-disp-mutex + - mediatek,mt6795-disp-mutex + - mediatek,mt8167-disp-mutex + - mediatek,mt8173-disp-mutex + - mediatek,mt8183-disp-mutex + - mediatek,mt8186-disp-mutex + - mediatek,mt8186-mdp3-mutex + - mediatek,mt8188-disp-mutex + - mediatek,mt8192-disp-mutex + - mediatek,mt8195-disp-mutex + - mediatek,mt8195-vpp-mutex + - mediatek,mt8365-disp-mutex + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + power-domains: + description: A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. See + Documentation/devicetree/bindings/power/power-domain.yaml for details. + + clocks: + items: + - description: MUTEX Clock + + mediatek,gce-events: + description: + The event id which is mapping to the specific hardware event signal + to gce. The event id is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/uint32-array + + mediatek,gce-client-reg: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + description: The register of client driver can be configured by gce with + 4 arguments defined in this property. Each GCE subsys id is mapping to + a client defined in the header include/dt-bindings/gce/<chip>-gce.h. + +allOf: + - if: + properties: + compatible: + contains: + enum: + - mediatek,mt2701-disp-mutex + - mediatek,mt2712-disp-mutex + - mediatek,mt6795-disp-mutex + - mediatek,mt8173-disp-mutex + - mediatek,mt8186-disp-mutex + - mediatek,mt8186-mdp3-mutex + - mediatek,mt8192-disp-mutex + - mediatek,mt8195-disp-mutex + then: + required: + - clocks + + +required: + - compatible + - reg + - interrupts + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/power/mt8173-power.h> + #include <dt-bindings/gce/mt8173-gce.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + mutex: mutex@14020000 { + compatible = "mediatek,mt8173-disp-mutex"; + reg = <0 0x14020000 0 0x1000>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&spm MT8173_POWER_DOMAIN_MM>; + clocks = <&mmsys CLK_MM_MUTEX_32K>; + mediatek,gce-events = <CMDQ_EVENT_MUTEX0_STREAM_EOF>, + <CMDQ_EVENT_MUTEX1_STREAM_EOF>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml new file mode 100644 index 0000000000..a06ac21774 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml @@ -0,0 +1,148 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/mediatek/mediatek,pwrap.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek PMIC Wrapper + +maintainers: + - Flora Fu <flora.fu@mediatek.com> + - Alexandre Mergnat <amergnat@baylibre.com> + +description: + On MediaTek SoCs the PMIC is connected via SPI. The SPI master interface + is not directly visible to the CPU, but only through the PMIC wrapper + inside the SoC. The communication between the SoC and the PMIC can + optionally be encrypted. Also a non standard Dual IO SPI mode can be + used to increase speed. + + IP Pairing + + On MT8135 the pins of some SoC internal peripherals can be on the PMIC. + The signals of these pins are routed over the SPI bus using the pwrap + bridge. In the binding description below the properties needed for bridging + are marked with "IP Pairing". These are optional on SoCs which do not support + IP Pairing + +properties: + compatible: + oneOf: + - items: + - enum: + - mediatek,mt2701-pwrap + - mediatek,mt6765-pwrap + - mediatek,mt6779-pwrap + - mediatek,mt6795-pwrap + - mediatek,mt6797-pwrap + - mediatek,mt6873-pwrap + - mediatek,mt7622-pwrap + - mediatek,mt8135-pwrap + - mediatek,mt8173-pwrap + - mediatek,mt8183-pwrap + - mediatek,mt8186-pwrap + - mediatek,mt8188-pwrap + - mediatek,mt8195-pwrap + - mediatek,mt8365-pwrap + - mediatek,mt8516-pwrap + - items: + - enum: + - mediatek,mt8186-pwrap + - mediatek,mt8195-pwrap + - const: syscon + + reg: + minItems: 1 + items: + - description: PMIC wrapper registers + - description: IP pairing registers + + reg-names: + minItems: 1 + items: + - const: pwrap + - const: pwrap-bridge + + interrupts: + maxItems: 1 + + clocks: + minItems: 2 + items: + - description: SPI bus clock + - description: Main module clock + - description: System module clock + - description: Timer module clock + + clock-names: + minItems: 2 + items: + - const: spi + - const: wrap + - const: sys + - const: tmr + + resets: + minItems: 1 + items: + - description: PMIC wrapper reset + - description: IP pairing reset + + reset-names: + minItems: 1 + items: + - const: pwrap + - const: pwrap-bridge + + pmic: + type: object + +required: + - compatible + - reg + - reg-names + - interrupts + - clocks + - clock-names + +dependentRequired: + resets: [reset-names] + +allOf: + - if: + properties: + compatible: + contains: + const: mediatek,mt8365-pwrap + then: + properties: + clocks: + minItems: 4 + + clock-names: + minItems: 4 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/reset/mt8135-resets.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + pwrap@1000f000 { + compatible = "mediatek,mt8135-pwrap"; + reg = <0 0x1000f000 0 0x1000>, + <0 0x11017000 0 0x1000>; + reg-names = "pwrap", "pwrap-bridge"; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk26m>, <&clk26m>; + clock-names = "spi", "wrap"; + resets = <&infracfg MT8135_INFRA_PMIC_WRAP_RST>, + <&pericfg MT8135_PERI_PWRAP_BRIDGE_SW_RST>; + reset-names = "pwrap", "pwrap-bridge"; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,wdma.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,wdma.yaml new file mode 100644 index 0000000000..69afb329e5 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,wdma.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/mediatek/mediatek,wdma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Write Direct Memory Access + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + - Moudy Ho <moudy.ho@mediatek.com> + +description: | + MediaTek Write Direct Memory Access(WDMA) component used to write + the data into DMA. + +properties: + compatible: + items: + - enum: + - mediatek,mt8183-mdp3-wdma + + reg: + maxItems: 1 + + mediatek,gce-client-reg: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + description: The register of client driver can be configured by gce with + 4 arguments defined in this property. Each GCE subsys id is mapping to + a client defined in the header include/dt-bindings/gce/<chip>-gce.h. + + mediatek,gce-events: + description: + The event id which is mapping to the specific hardware event signal + to gce. The event id is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/uint32-array + + power-domains: + maxItems: 1 + + clocks: + minItems: 1 + + iommus: + maxItems: 1 + +required: + - compatible + - reg + - mediatek,gce-client-reg + - mediatek,gce-events + - power-domains + - clocks + - iommus + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8183-clk.h> + #include <dt-bindings/gce/mt8183-gce.h> + #include <dt-bindings/power/mt8183-power.h> + #include <dt-bindings/memory/mt8183-larb-port.h> + + mdp3_wdma: mdp3-wdma@14006000 { + compatible = "mediatek,mt8183-mdp3-wdma"; + reg = <0x14006000 0x1000>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x6000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_MDP_WDMA0_SOF>, + <CMDQ_EVENT_MDP_WDMA0_EOF>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_MDP_WDMA0>; + iommus = <&iommu>; + }; diff --git a/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml b/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml new file mode 100644 index 0000000000..f21eb907ee --- /dev/null +++ b/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/mediatek/mtk-svs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Smart Voltage Scaling (SVS) + +maintainers: + - Roger Lu <roger.lu@mediatek.com> + - Matthias Brugger <matthias.bgg@gmail.com> + - Kevin Hilman <khilman@kernel.org> + +description: |+ + The SVS engine is a piece of hardware which has several + controllers(banks) for calculating suitable voltage to + different power domains(CPU/GPU/CCI) according to + chip process corner, temperatures and other factors. Then DVFS + driver could apply SVS bank voltage to PMIC/Buck. + +properties: + compatible: + enum: + - mediatek,mt8183-svs + - mediatek,mt8192-svs + + reg: + maxItems: 1 + description: Address range of the MTK SVS controller. + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + description: Main clock for MTK SVS controller to work. + + clock-names: + const: main + + nvmem-cells: + minItems: 1 + description: + Phandle to the calibration data provided by a nvmem device. + items: + - description: SVS efuse for SVS controller + - description: Thermal efuse for SVS controller + + nvmem-cell-names: + items: + - const: svs-calibration-data + - const: t-calibration-data + + resets: + maxItems: 1 + + reset-names: + items: + - const: svs_rst + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - nvmem-cells + - nvmem-cell-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8183-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + svs@1100b000 { + compatible = "mediatek,mt8183-svs"; + reg = <0 0x1100b000 0 0x1000>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_THERM>; + clock-names = "main"; + nvmem-cells = <&svs_calibration>, <&thermal_calibration>; + nvmem-cell-names = "svs-calibration-data", "t-calibration-data"; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt new file mode 100644 index 0000000000..2bc367793a --- /dev/null +++ b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt @@ -0,0 +1,78 @@ +MediaTek SCPSYS +=============== + +The System Control Processor System (SCPSYS) has several power management +related tasks in the system. The tasks include thermal measurement, dynamic +voltage frequency scaling (DVFS), interrupt filter and lowlevel sleep control. +The System Power Manager (SPM) inside the SCPSYS is for the MTCMOS power +domain control. + +The driver implements the Generic PM domain bindings described in +power/power-domain.yaml. It provides the power domains defined in +- include/dt-bindings/power/mt8173-power.h +- include/dt-bindings/power/mt6797-power.h +- include/dt-bindings/power/mt6765-power.h +- include/dt-bindings/power/mt2701-power.h +- include/dt-bindings/power/mt2712-power.h +- include/dt-bindings/power/mt7622-power.h + +Required properties: +- compatible: Should be one of: + - "mediatek,mt2701-scpsys" + - "mediatek,mt2712-scpsys" + - "mediatek,mt6765-scpsys" + - "mediatek,mt6797-scpsys" + - "mediatek,mt7622-scpsys" + - "mediatek,mt7623-scpsys", "mediatek,mt2701-scpsys": For MT7623 SoC + - "mediatek,mt7623a-scpsys": For MT7623A SoC + - "mediatek,mt7629-scpsys", "mediatek,mt7622-scpsys": For MT7629 SoC + - "mediatek,mt8173-scpsys" +- #power-domain-cells: Must be 1 +- reg: Address range of the SCPSYS unit +- infracfg: must contain a phandle to the infracfg controller +- clock, clock-names: clocks according to the common clock binding. + These are clocks which hardware needs to be + enabled before enabling certain power domains. + Required clocks for MT2701 or MT7623: "mm", "mfg", "ethif" + Required clocks for MT2712: "mm", "mfg", "venc", "jpgdec", "audio", "vdec" + Required clocks for MT6765: MUX: "mm", "mfg" + CG: "mm-0", "mm-1", "mm-2", "mm-3", "isp-0", + "isp-1", "cam-0", "cam-1", "cam-2", + "cam-3","cam-4" + Required clocks for MT6797: "mm", "mfg", "vdec" + Required clocks for MT7622 or MT7629: "hif_sel" + Required clocks for MT7623A: "ethif" + Required clocks for MT8173: "mm", "mfg", "venc", "venc_lt" + +Optional properties: +- vdec-supply: Power supply for the vdec power domain +- venc-supply: Power supply for the venc power domain +- isp-supply: Power supply for the isp power domain +- mm-supply: Power supply for the mm power domain +- venc_lt-supply: Power supply for the venc_lt power domain +- audio-supply: Power supply for the audio power domain +- usb-supply: Power supply for the usb power domain +- mfg_async-supply: Power supply for the mfg_async power domain +- mfg_2d-supply: Power supply for the mfg_2d power domain +- mfg-supply: Power supply for the mfg power domain + +Example: + + scpsys: scpsys@10006000 { + #power-domain-cells = <1>; + compatible = "mediatek,mt8173-scpsys"; + reg = <0 0x10006000 0 0x1000>; + infracfg = <&infracfg>; + clocks = <&clk26m>, + <&topckgen CLK_TOP_MM_SEL>; + <&topckgen CLK_TOP_VENC_SEL>, + <&topckgen CLK_TOP_VENC_LT_SEL>; + clock-names = "mfg", "mm", "venc", "venc_lt"; + }; + +Example consumer: + + afe: mt8173-afe-pcm@11220000 { + compatible = "mediatek,mt8173-afe-pcm"; + power-domains = <&scpsys MT8173_POWER_DOMAIN_AUDIO>; + }; diff --git a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml new file mode 100644 index 0000000000..a464111495 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml @@ -0,0 +1,214 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/microchip/atmel,at91rm9200-tcb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel Timer Counter Block + +maintainers: + - Alexandre Belloni <alexandre.belloni@bootlin.com> + +description: | + The Atmel (now Microchip) SoCs have timers named Timer Counter Block. Each + timer has three channels with two counters each. + +properties: + compatible: + items: + - enum: + - atmel,at91rm9200-tcb + - atmel,at91sam9x5-tcb + - atmel,sama5d2-tcb + - const: simple-mfd + - const: syscon + + reg: + maxItems: 1 + + interrupts: + description: + List of interrupts. One interrupt per TCB channel if available or one + interrupt for the TC block + minItems: 1 + maxItems: 3 + + clock-names: + description: + List of clock names. Always includes t0_clk and slow clk. Also includes + t1_clk and t2_clk if a clock per channel is available. + minItems: 2 + maxItems: 4 + + clocks: + minItems: 2 + maxItems: 4 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "^timer@[0-2]$": + description: The timer block channels that are used as timers or counters. + type: object + additionalProperties: false + properties: + compatible: + items: + - enum: + - atmel,tcb-timer + - atmel,tcb-pwm + - microchip,tcb-capture + reg: + description: + List of channels to use for this particular timer. In Microchip TCB capture + mode channels are registered as a counter devices, for the qdec mode TCB0's + channel <0> and <1> are required. + + minItems: 1 + maxItems: 3 + required: + - compatible + - reg + + "^pwm@[0-2]$": + description: The timer block channels that are used as PWMs. + $ref: /schemas/pwm/pwm.yaml# + type: object + properties: + compatible: + const: atmel,tcb-pwm + reg: + description: + TCB channel to use for this PWM. + enum: [ 0, 1, 2 ] + + "#pwm-cells": + description: + The only third cell flag supported by this binding is + PWM_POLARITY_INVERTED. + const: 3 + + required: + - compatible + - reg + - "#pwm-cells" + + additionalProperties: false + + +allOf: + - if: + properties: + compatible: + contains: + const: atmel,sama5d2-tcb + then: + properties: + clocks: + minItems: 3 + maxItems: 3 + clock-names: + items: + - const: t0_clk + - const: gclk + - const: slow_clk + else: + properties: + clocks: + minItems: 2 + maxItems: 4 + clock-names: + oneOf: + - items: + - const: t0_clk + - const: slow_clk + - items: + - const: t0_clk + - const: t1_clk + - const: t2_clk + - const: slow_clk + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - '#address-cells' + - '#size-cells' + +additionalProperties: false + +examples: + - | + /* One interrupt per TC block: */ + tcb0: timer@fff7c000 { + compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfff7c000 0x100>; + interrupts = <18 4>; + clocks = <&tcb0_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; + + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>, <1>; + }; + + timer@2 { + compatible = "atmel,tcb-timer"; + reg = <2>; + }; + }; + + /* One interrupt per TC channel in a TC block: */ + tcb1: timer@fffdc000 { + compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfffdc000 0x100>; + interrupts = <26 4>, <27 4>, <28 4>; + clocks = <&tcb1_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; + + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; + + pwm@2 { + compatible = "atmel,tcb-pwm"; + reg = <2>; + #pwm-cells = <3>; + }; + }; + /* TCB0 Capture with QDEC: */ + timer@f800c000 { + compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfff7c000 0x100>; + interrupts = <18 4>; + clocks = <&tcb0_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; + + timer@0 { + compatible = "microchip,tcb-capture"; + reg = <0>, <1>; + }; + + timer@2 { + compatible = "atmel,tcb-timer"; + reg = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml b/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml new file mode 100644 index 0000000000..365a9fed59 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/microchip/microchip,mpfs-sys-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PolarFire SoC (MPFS) MSS (microprocessor subsystem) system controller + +maintainers: + - Conor Dooley <conor.dooley@microchip.com> + +description: | + PolarFire SoC devices include a microcontroller acting as the system controller, + which provides "services" to the main processor and to the FPGA fabric. These + services include hardware rng, reprogramming of the FPGA and verification of the + eNVM contents etc. More information on these services can be found online, at + https://onlinedocs.microchip.com/pr/GUID-1409CF11-8EF9-4C24-A94E-70979A688632-en-US-1/index.html + + Communication with the system controller is done via a mailbox, of which the client + portion is documented here. + +properties: + mboxes: + maxItems: 1 + + compatible: + const: microchip,mpfs-sys-controller + +required: + - compatible + - mboxes + +additionalProperties: false + +examples: + - | + syscontroller { + compatible = "microchip,mpfs-sys-controller"; + mboxes = <&mbox 0>; + }; diff --git a/Documentation/devicetree/bindings/soc/nuvoton/nuvoton,npcm-gcr.yaml b/Documentation/devicetree/bindings/soc/nuvoton/nuvoton,npcm-gcr.yaml new file mode 100644 index 0000000000..23e7e4ea01 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/nuvoton/nuvoton,npcm-gcr.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/nuvoton/nuvoton,npcm-gcr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Global Control Registers block in Nuvoton SoCs + +maintainers: + - Jonathan Neuschäfer <j.neuschaefer@gmx.net> + - Tomer Maimon <tmaimon77@gmail.com> + +description: + The Global Control Registers (GCR) are a block of registers in Nuvoton SoCs + that expose misc functionality such as chip model and version information or + pinmux settings. + +properties: + compatible: + items: + - enum: + - nuvoton,wpcm450-gcr + - nuvoton,npcm750-gcr + - nuvoton,npcm845-gcr + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: + type: object + +examples: + - | + gcr: syscon@800000 { + compatible = "nuvoton,npcm750-gcr", "syscon", "simple-mfd"; + reg = <0x800000 0x1000>; + + mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x38 0x07>; + idle-states = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml new file mode 100644 index 0000000000..d1c7c2be86 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,aoss-qmp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Always-On Subsystem side channel + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: + This binding describes the hardware component responsible for side channel + requests to the always-on subsystem (AOSS), used for certain power management + requests that is not handled by the standard RPMh interface. Each client in the + SoC has its own block of message RAM and IRQ for communication with the AOSS. + The protocol used to communicate in the message RAM is known as Qualcomm + Messaging Protocol (QMP) + + The AOSS side channel exposes control over a set of resources, used to control + a set of debug related clocks and to affect the low power state of resources + related to the secondary subsystems. + +properties: + compatible: + items: + - enum: + - qcom,qdu1000-aoss-qmp + - qcom,sa8775p-aoss-qmp + - qcom,sc7180-aoss-qmp + - qcom,sc7280-aoss-qmp + - qcom,sc8180x-aoss-qmp + - qcom,sc8280xp-aoss-qmp + - qcom,sdm845-aoss-qmp + - qcom,sm6350-aoss-qmp + - qcom,sm8150-aoss-qmp + - qcom,sm8250-aoss-qmp + - qcom,sm8350-aoss-qmp + - qcom,sm8450-aoss-qmp + - qcom,sm8550-aoss-qmp + - const: qcom,aoss-qmp + + reg: + maxItems: 1 + description: + The base address and size of the message RAM for this client's + communication with the AOSS + + interrupts: + maxItems: 1 + description: + Should specify the AOSS message IRQ for this client + + mboxes: + maxItems: 1 + description: + Reference to the mailbox representing the outgoing doorbell in APCS for + this client, as described in mailbox/mailbox.txt + + "#clock-cells": + const: 0 + description: + The single clock represents the QDSS clock. + +required: + - compatible + - reg + - interrupts + - mboxes + - "#clock-cells" + +additionalProperties: false + +patternProperties: + "^(cx|mx|ebi)$": + type: object + description: + The AOSS side channel also provides the controls for three cooling devices, + these are expressed as subnodes of the QMP node. The name of the node is + used to identify the resource and must therefore be "cx", "mx" or "ebi". + + properties: + "#cooling-cells": + const: 2 + + required: + - "#cooling-cells" + + additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + aoss_qmp: qmp@c300000 { + compatible = "qcom,sdm845-aoss-qmp", "qcom,aoss-qmp"; + reg = <0x0c300000 0x100000>; + interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apss_shared 0>; + + #clock-cells = <0>; + + cx_cdev: cx { + #cooling-cells = <2>; + }; + + mx_cdev: mx { + #cooling-cells = <2>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr-services.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,apr-services.yaml new file mode 100644 index 0000000000..bdf482db32 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr-services.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,apr-services.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm APR/GPR services shared parts + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: + Common parts of a static service in Qualcomm APR/GPR (Asynchronous/Generic + Packet Router). + +properties: + reg: + minimum: 1 + maximum: 13 + description: | + APR Service ID + 3 = DSP Core Service + 4 = Audio Front End Service. + 5 = Voice Stream Manager Service. + 6 = Voice processing manager. + 7 = Audio Stream Manager Service. + 8 = Audio Device Manager Service. + 9 = Multimode voice manager. + 10 = Core voice stream. + 11 = Core voice processor. + 12 = Ultrasound stream manager. + 13 = Listen stream manager. + GPR Service ID + 1 = Audio Process Manager Service + 2 = Proxy Resource Manager Service. + 3 = AMDB Service. + 4 = Voice processing manager. + + qcom,protection-domain: + $ref: /schemas/types.yaml#/definitions/string-array + description: | + Protection domain service name and path for APR service (if supported). + Possible values are:: + "avs/audio", "msm/adsp/audio_pd". + "kernel/elf_loader", "msm/modem/wlan_pd". + "tms/servreg", "msm/adsp/audio_pd". + "tms/servreg", "msm/modem/wlan_pd". + "tms/servreg", "msm/slpi/sensor_pd". + +required: + - reg + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml new file mode 100644 index 0000000000..e51acdcaaf --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml @@ -0,0 +1,211 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,apr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm APR/GPR (Asynchronous/Generic Packet Router) + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + This binding describes the Qualcomm APR/GPR, APR/GPR is a IPC protocol for + communication between Application processor and QDSP. APR/GPR is mainly + used for audio/voice services on the QDSP. + +properties: + compatible: + enum: + - qcom,apr + - qcom,apr-v2 + - qcom,gpr + + power-domains: + maxItems: 1 + + qcom,apr-domain: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 3, 4, 5, 6, 7] + description: + Selects the processor domain for apr + 1 = APR simulator + 2 = PC Domain + 3 = Modem Domain + 4 = ADSP Domain + 5 = Application processor Domain + 6 = Modem2 Domain + 7 = Application Processor2 Domain + deprecated: true + + qcom,domain: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 7 + description: + Selects the processor domain for apr + 1 = APR simulator + 2 = PC Domain + 3 = Modem Domain + 4 = ADSP Domain + 5 = Application processor Domain + 6 = Modem2 Domain + 7 = Application Processor2 Domain + Selects the processor domain for gpr + 1 = Modem Domain + 2 = Audio DSP Domain + 3 = Application Processor Domain + + qcom,glink-channels: + $ref: /schemas/types.yaml#/definitions/string-array + description: Channel name used for the communication + maxItems: 1 + + qcom,intents: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + minItems: 1 + maxItems: 32 + items: + items: + - description: size of each intent to preallocate + - description: amount of intents to preallocate + minimum: 1 + description: + List of (size, amount) pairs describing what intents should be + preallocated for this virtual channel. This can be used to tweak the + default intents available for the channel to meet expectations of the + remote. + + qcom,smd-channels: + $ref: /schemas/types.yaml#/definitions/string-array + description: Channel name used for the communication + items: + - const: apr_audio_svc + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "^service@[1-9a-d]$": + type: object + $ref: /schemas/soc/qcom/qcom,apr-services.yaml + additionalProperties: true + description: + APR/GPR static port services. + + properties: + compatible: + enum: + - qcom,q6core + - qcom,q6asm + - qcom,q6afe + - qcom,q6adm + - qcom,q6apm + - qcom,q6prm + +required: + - compatible + - qcom,domain + +allOf: + - if: + properties: + compatible: + enum: + - qcom,gpr + then: + properties: + qcom,glink-channels: + items: + - const: adsp_apps + power-domains: false + else: + properties: + qcom,glink-channels: + items: + - const: apr_audio_svc + + - if: + required: + - qcom,glink-channels + then: + properties: + qcom,smd-channels: false + + - if: + required: + - qcom,smd-channels + then: + properties: + qcom,glink-channels: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/qcom,apr.h> + apr { + compatible = "qcom,apr-v2"; + qcom,domain = <APR_DOMAIN_ADSP>; + qcom,glink-channels = "apr_audio_svc"; + qcom,intents = <512 20>; + #address-cells = <1>; + #size-cells = <0>; + + q6core: service@3 { + compatible = "qcom,q6core"; + reg = <APR_SVC_ADSP_CORE>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + }; + + service@4 { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + clock-controller { + compatible = "qcom,q6afe-clocks"; + #clock-cells = <2>; + }; + + dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + /* ... */ + }; + /* ... */ + }; + }; + + - | + #include <dt-bindings/soc/qcom,gpr.h> + gpr { + compatible = "qcom,gpr"; + qcom,domain = <GPR_DOMAIN_ID_ADSP>; + qcom,glink-channels = "adsp_apps"; + qcom,intents = <512 20>; + #address-cells = <1>; + #size-cells = <0>; + + service@1 { + compatible = "qcom,q6apm"; + reg = <GPR_APM_MODULE_IID>; + #sound-dai-cells = <0>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + dais { + compatible = "qcom,q6apm-dais"; + iommus = <&apps_smmu 0x1801 0x0>; + }; + + bedais { + compatible = "qcom,q6apm-lpass-dais"; + #sound-dai-cells = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,dcc.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,dcc.yaml new file mode 100644 index 0000000000..ce7e20dd22 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,dcc.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,dcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Data Capture and Compare + +maintainers: + - Souradeep Chowdhury <quic_schowdhu@quicinc.com> + +description: | + DCC (Data Capture and Compare) is a DMA engine which is used to save + configuration data or system memory contents during catastrophic failure + or SW trigger. DCC is used to capture and store data for debugging purpose + +properties: + compatible: + items: + - enum: + - qcom,sm8150-dcc + - qcom,sc7280-dcc + - qcom,sc7180-dcc + - qcom,sdm845-dcc + - const: qcom,dcc + + reg: + items: + - description: DCC base + - description: DCC RAM base + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + dma@10a2000{ + compatible = "qcom,sm8150-dcc", "qcom,dcc"; + reg = <0x010a2000 0x1000>, + <0x010ad000 0x2000>; + }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml new file mode 100644 index 0000000000..f2c5ec7e64 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,eud.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,eud.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Embedded USB Debugger + +maintainers: + - Souradeep Chowdhury <quic_schowdhu@quicinc.com> + +description: + This binding is used to describe the Qualcomm Embedded USB Debugger, which is + mini USB-hub implemented on chip to support USB-based debug capabilities. + +properties: + compatible: + items: + - enum: + - qcom,sc7280-eud + - const: qcom,eud + + reg: + items: + - description: EUD Base Register Region + - description: EUD Mode Manager Register + + interrupts: + description: EUD interrupt + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: + These ports is to be attached to the endpoint of the DWC3 controller node + and type C connector node. The controller has the "usb-role-switch" + property. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: This port is to be attached to the DWC3 controller. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: This port is to be attached to the type C connector. + +required: + - compatible + - reg + - ports + +additionalProperties: false + +examples: + - | + eud@88e0000 { + compatible = "qcom,sc7280-eud", "qcom,eud"; + reg = <0x88e0000 0x2000>, + <0x88e2000 0x1000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + eud_ep: endpoint { + remote-endpoint = <&usb2_role_switch>; + }; + }; + + port@1 { + reg = <1>; + eud_con: endpoint { + remote-endpoint = <&con_eud>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml new file mode 100644 index 0000000000..8a4b7ba3aa --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml @@ -0,0 +1,163 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GENI Serial Engine QUP Wrapper Controller + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: | + Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper + is a programmable module for supporting a wide range of serial interfaces + like UART, SPI, I2C, I3C, etc. A single QUP module can provide upto 8 Serial + Interfaces, using its internal Serial Engines. The GENI Serial Engine QUP + Wrapper controller is modeled as a node with zero or more child nodes each + representing a serial engine. + +properties: + compatible: + enum: + - qcom,geni-se-qup + - qcom,geni-se-i2c-master-hub + + reg: + description: QUP wrapper common register address and length. + maxItems: 1 + + clock-names: + minItems: 1 + maxItems: 2 + + clocks: + minItems: 1 + maxItems: 2 + + "#address-cells": + const: 2 + + "#size-cells": + const: 2 + + ranges: true + + interconnects: + maxItems: 1 + + interconnect-names: + const: qup-core + + iommus: + maxItems: 1 + +required: + - compatible + - reg + - clock-names + - clocks + - "#address-cells" + - "#size-cells" + - ranges + +patternProperties: + "spi@[0-9a-f]+$": + type: object + description: GENI serial engine based SPI controller. SPI in master mode + supports up to 50MHz, up to four chip selects, programmable + data path from 4 bits to 32 bits and numerous protocol + variants. + $ref: /schemas/spi/qcom,spi-geni-qcom.yaml# + + "i2c@[0-9a-f]+$": + type: object + description: GENI serial engine based I2C controller. + $ref: /schemas/i2c/qcom,i2c-geni-qcom.yaml# + + "serial@[0-9a-f]+$": + type: object + description: GENI Serial Engine based UART Controller. + $ref: /schemas/serial/qcom,serial-geni-qcom.yaml# + +allOf: + - if: + properties: + compatible: + contains: + const: qcom,geni-se-i2c-master-hub + then: + properties: + clock-names: + items: + - const: s-ahb + + clocks: + items: + - description: Slave AHB Clock + + iommus: false + + patternProperties: + "spi@[0-9a-f]+$": false + "serial@[0-9a-f]+$": false + else: + properties: + clock-names: + items: + - const: m-ahb + - const: s-ahb + + clocks: + items: + - description: Master AHB Clock + - description: Slave AHB Clock + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sdm845.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x008c0000 0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + i2c0: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0xa94000 0 0x4000>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_1_i2c_5_active>; + pinctrl-1 = <&qup_1_i2c_5_sleep>; + #address-cells = <1>; + #size-cells = <0>; + }; + + uart0: serial@a88000 { + compatible = "qcom,geni-uart"; + reg = <0 0xa88000 0 0x7000>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_1_uart_3_active>; + pinctrl-1 = <&qup_1_uart_3_sleep>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml new file mode 100644 index 0000000000..c33704333e --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,gsbi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm General Serial Bus Interface (GSBI) + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + The GSBI controller is modeled as a node with zero or more child nodes, each + representing a serial sub-node device that is mux'd as part of the GSBI + configuration settings. The mode setting will govern the input/output mode + of the 4 GSBI IOs. + + A GSBI controller node can contain 0 or more child nodes representing serial + devices. These serial devices can be a QCOM UART, I2C controller, spi + controller, or some combination of aforementioned devices. + +properties: + compatible: + const: qcom,gsbi-v1.0.0 + + '#address-cells': + const: 1 + + cell-index: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The GSBI index. + + clocks: + maxItems: 1 + + clock-names: + const: iface + + qcom,crci: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + CRCI MUX value for QUP CRCI ports. Please reference + include/dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values. + + qcom,mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + MUX value for configuration of the serial interface. Please reference + include/dt-bindings/soc/qcom,gsbi.h for valid mux values. + + '#size-cells': + const: 1 + + syscon-tcsr: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle of TCSR syscon node.Required if child uses dma. + + ranges: true + + reg: + maxItems: 1 + +patternProperties: + "spi@[0-9a-f]+$": + type: object + $ref: /schemas/spi/qcom,spi-qup.yaml# + + "i2c@[0-9a-f]+$": + type: object + $ref: /schemas/i2c/qcom,i2c-qup.yaml# + + "serial@[0-9a-f]+$": + type: object + $ref: /schemas/serial/qcom,msm-uartdm.yaml# + +required: + - compatible + - cell-index + - clocks + - clock-names + - qcom,mode + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8960.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/soc/qcom,gsbi.h> + + gsbi@12440000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x12440000 0x100>; + cell-index = <1>; + clocks = <&gcc GSBI1_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + qcom,mode = <GSBI_PROT_I2C_UART>; + + serial@12450000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x12450000 0x100>, + <0x12400000 0x03>; + interrupts = <0 193 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + }; + + i2c@12460000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x12460000 0x1000>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-1 = <&i2c1_pins_sleep>; + pinctrl-names = "default", "sleep"; + interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; /* UART chosen */ + }; + }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,msm8976-ramp-controller.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,msm8976-ramp-controller.yaml new file mode 100644 index 0000000000..aae9cf7b8c --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,msm8976-ramp-controller.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,msm8976-ramp-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Ramp Controller + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> + +description: + The Ramp Controller is used to program the sequence ID for pulse + swallowing, enable sequences and link Sequence IDs (SIDs) for the + CPU cores on some Qualcomm SoCs. + +properties: + compatible: + enum: + - qcom,msm8976-ramp-controller + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + cpu-power-controller@b014000 { + compatible = "qcom,msm8976-ramp-controller"; + reg = <0x0b014000 0x68>; + }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml new file mode 100644 index 0000000000..bceb479f74 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,pmic-glink.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PMIC GLINK firmware interface for battery management, USB + Type-C and other things. + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + +description: + The PMIC GLINK service, running on a coprocessor on some modern Qualcomm + platforms and implement USB Type-C handling and battery management. This + binding describes the component in the OS used to communicate with the + firmware and connect it's resources to those described in the Devicetree, + particularly the USB Type-C controllers relationship with USB and DisplayPort + components. + +properties: + compatible: + items: + - enum: + - qcom,sc8180x-pmic-glink + - qcom,sc8280xp-pmic-glink + - qcom,sm8350-pmic-glink + - qcom,sm8450-pmic-glink + - qcom,sm8550-pmic-glink + - const: qcom,pmic-glink + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + '^connector@\d$': + $ref: /schemas/connector/usb-connector.yaml# + required: + - reg + +required: + - compatible + +additionalProperties: false + +examples: + - |+ + pmic-glink { + compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink"; + + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&usb_role>; + }; + }; + + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&ss_phy_out>; + }; + }; + + port@2 { + reg = <2>; + endpoint { + remote-endpoint = <&sbu_mux>; + }; + }; + }; + }; + }; +... + diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,rpm-master-stats.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm-master-stats.yaml new file mode 100644 index 0000000000..031800985b --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm-master-stats.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,rpm-master-stats.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. (QTI) RPM Master Stats + +maintainers: + - Konrad Dybcio <konrad.dybcio@linaro.org> + +description: | + The Qualcomm RPM (Resource Power Manager) architecture includes a concept + of "RPM Masters". They can be thought of as "the local gang leaders", usually + spanning a single subsystem (e.g. APSS, ADSP, CDSP). All of the RPM decisions + (particularly around entering hardware-driven low power modes: XO shutdown + and total system-wide power collapse) are first made at Master-level, and + only then aggregated for the entire system. + + The Master Stats provide a few useful bits that can be used to assess whether + our device has entered the desired low-power mode, how long it took to do so, + the duration of that residence, how long it took to come back online, + how many times a given sleep state was entered and which cores are actively + voting for staying awake. + + This scheme has been used on various SoCs in the 2013-2023 era, with some + newer or higher-end designs providing this information through an SMEM query. + +properties: + compatible: + const: qcom,rpm-master-stats + + qcom,rpm-msg-ram: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: Phandle to an RPM MSG RAM slice containing the master stats + minItems: 1 + maxItems: 5 + + qcom,master-names: + $ref: /schemas/types.yaml#/definitions/string-array + description: + The name of the RPM Master which owns the MSG RAM slice where this + instance of Master Stats resides + minItems: 1 + maxItems: 5 + +required: + - compatible + - qcom,rpm-msg-ram + - qcom,master-names + +additionalProperties: false + +examples: + - | + stats { + compatible = "qcom,rpm-master-stats"; + qcom,rpm-msg-ram = <&apss_master_stats>, + <&mpss_master_stats>, + <&adsp_master_stats>, + <&cdsp_master_stats>, + <&tz_master_stats>; + qcom,master-names = "APSS", + "MPSS", + "ADSP", + "CDSP", + "TZ"; + }; +... diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.yaml new file mode 100644 index 0000000000..b00be9e012 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,rpm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Resource Power Manager (RPM) + +description: + This driver is used to interface with the Resource Power Manager (RPM) found + in various Qualcomm platforms. The RPM allows each component in the system + to vote for state of the system resources, such as clocks, regulators and bus + frequencies. + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + +properties: + compatible: + enum: + - qcom,rpm-apq8064 + - qcom,rpm-msm8660 + - qcom,rpm-msm8960 + - qcom,rpm-ipq8064 + - qcom,rpm-mdm9615 + + reg: + maxItems: 1 + + interrupts: + maxItems: 3 + + interrupt-names: + items: + - const: ack + - const: err + - const: wakeup + + qcom,ipc: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to a syscon node representing the APCS registers + - description: u32 representing offset to the register within the syscon + - description: u32 representing the ipc bit within the register + description: + Three entries specifying the outgoing ipc bit used for signaling the RPM. + +patternProperties: + "^regulators(-[01])?$": + type: object + $ref: /schemas/regulator/qcom,rpm-regulator.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-names + - qcom,ipc + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/mfd/qcom-rpm.h> + + rpm@108000 { + compatible = "qcom,rpm-msm8960"; + reg = <0x108000 0x1000>; + qcom,ipc = <&apcs 0x8 2>; + + interrupts = <GIC_SPI 19 IRQ_TYPE_NONE>, <GIC_SPI 21 IRQ_TYPE_NONE>, <GIC_SPI 22 IRQ_TYPE_NONE>; + interrupt-names = "ack", "err", "wakeup"; + + regulators { + compatible = "qcom,rpm-pm8921-regulators"; + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + + s1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + + bias-pull-down; + + qcom,switch-mode-frequency = <3200000>; + }; + + pm8921_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + + qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml new file mode 100644 index 0000000000..af632d0e03 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml @@ -0,0 +1,269 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,rpmh-rsc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm RPMH RSC + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: | + Resource Power Manager Hardened (RPMH) is the mechanism for communicating + with the hardened resource accelerators on Qualcomm SoCs. Requests to the + resources can be written to the Trigger Command Set (TCS) registers and + using a (addr, val) pair and triggered. Messages in the TCS are then sent in + sequence over an internal bus. + + The hardware block (Direct Resource Voter or DRV) is a part of the h/w entity + (Resource State Coordinator a.k.a RSC) that can handle multiple sleep and + active/wake resource requests. Multiple such DRVs can exist in a SoC and can + be written to from Linux. The structure of each DRV follows the same template + with a few variations that are captured by the properties here. + + A TCS may be triggered from Linux or triggered by the F/W after all the CPUs + have powered off to facilitate idle power saving. TCS could be classified as:: + ACTIVE - Triggered by Linux + SLEEP - Triggered by F/W + WAKE - Triggered by F/W + CONTROL - Triggered by F/W + See also:: <dt-bindings/soc/qcom,rpmh-rsc.h> + + The order in which they are described in the DT, should match the hardware + configuration. + + Requests can be made for the state of a resource, when the subsystem is + active or idle. When all subsystems like Modem, GPU, CPU are idle, the + resource state will be an aggregate of the sleep votes from each of those + subsystems. Clients may request a sleep value for their shared resources in + addition to the active mode requests. + + Drivers that want to use the RSC to communicate with RPMH must specify their + bindings as child nodes of the RSC controllers they wish to communicate with. + +properties: + compatible: + const: qcom,rpmh-rsc + + interrupts: + minItems: 1 + maxItems: 4 + description: + The interrupt that trips when a message complete/response is received for + this DRV from the accelerators. + Number of interrupts must match number of DRV blocks. + + label: + description: + Name for the RSC. The name would be used in trace logs. + + qcom,drv-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The ID of the DRV in the RSC block that will be used by this controller. + + qcom,tcs-config: + $ref: /schemas/types.yaml#/definitions/uint32-matrix + minItems: 4 + maxItems: 4 + items: + items: + - description: | + TCS type:: + - ACTIVE_TCS + - SLEEP_TCS + - WAKE_TCS + - CONTROL_TCS + enum: [ 0, 1, 2, 3 ] + - description: Number of TCS + description: | + The tuple defining the configuration of TCS. Must have two cells which + describe each TCS type. The order of the TCS must match the hardware + configuration. + + qcom,tcs-offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The offset of the TCS blocks. + + reg: + minItems: 1 + maxItems: 4 + + reg-names: + minItems: 1 + items: + - const: drv-0 + - const: drv-1 + - const: drv-2 + - const: drv-3 + + power-domains: + maxItems: 1 + + bcm-voter: + $ref: /schemas/interconnect/qcom,bcm-voter.yaml# + + clock-controller: + $ref: /schemas/clock/qcom,rpmhcc.yaml# + + power-controller: + $ref: /schemas/power/qcom,rpmpd.yaml# + +patternProperties: + '^regulators(-[0-9])?$': + $ref: /schemas/regulator/qcom,rpmh-regulator.yaml# + unevaluatedProperties: false + +required: + - compatible + - interrupts + - qcom,drv-id + - qcom,tcs-config + - qcom,tcs-offset + - reg + - reg-names + - power-domains + +additionalProperties: false + +examples: + - | + // For a TCS whose RSC base address is 0x179C0000 and is at a DRV id of + // 2, the register offsets for DRV2 start at 0D00, the register + // calculations are like this:: + // DRV0: 0x179C0000 + // DRV2: 0x179C0000 + 0x10000 = 0x179D0000 + // DRV2: 0x179C0000 + 0x10000 * 2 = 0x179E0000 + // TCS-OFFSET: 0xD00 + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/soc/qcom,rpmh-rsc.h> + + rsc@179c0000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x179c0000 0x10000>, + <0x179d0000 0x10000>, + <0x179e0000 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + label = "apps_rsc"; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, + <SLEEP_TCS 3>, + <WAKE_TCS 3>, + <CONTROL_TCS 1>; + power-domains = <&CLUSTER_PD>; + }; + + - | + // For a TCS whose RSC base address is 0xAF20000 and is at DRV id of 0, the + // register offsets for DRV0 start at 01C00, the register calculations are + // like this:: + // DRV0: 0xAF20000 + // TCS-OFFSET: 0x1C00 + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/soc/qcom,rpmh-rsc.h> + + rsc@af20000 { + compatible = "qcom,rpmh-rsc"; + reg = <0xaf20000 0x10000>; + reg-names = "drv-0"; + interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; + label = "disp_rsc"; + qcom,tcs-offset = <0x1c00>; + qcom,drv-id = <0>; + qcom,tcs-config = <ACTIVE_TCS 0>, + <SLEEP_TCS 1>, + <WAKE_TCS 1>, + <CONTROL_TCS 0>; + power-domains = <&CLUSTER_PD>; + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/soc/qcom,rpmh-rsc.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + rsc@18200000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x18200000 0x10000>, + <0x18210000 0x10000>, + <0x18220000 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + label = "apps_rsc"; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, + <SLEEP_TCS 3>, + <WAKE_TCS 3>, + <CONTROL_TCS 0>; + power-domains = <&CLUSTER_PD>; + + clock-controller { + compatible = "qcom,sm8350-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + power-controller { + compatible = "qcom,sm8350-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + + bcm-voter { + compatible = "qcom,bcm-voter"; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml new file mode 100644 index 0000000000..2fa725b8af --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml @@ -0,0 +1,160 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,smd-rpm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Resource Power Manager (RPM) over SMD/GLINK + +description: | + This driver is used to interface with the Resource Power Manager (RPM) found + in various Qualcomm platforms. The RPM allows each component in the system + to vote for state of the system resources, such as clocks, regulators and bus + frequencies. + + The SMD or GLINK information for the RPM edge should be filled out. See + qcom,smd.yaml for the required edge properties. All SMD/GLINK related + properties will reside within the RPM node itself. + + The RPM exposes resources to its subnodes. The rpm_requests node must be + present and this subnode may contain children that designate regulator + resources. + + Refer to Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.yaml + for information on the regulator subnodes that can exist under the + rpm_requests. + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + +properties: + compatible: + enum: + - qcom,rpm-apq8084 + - qcom,rpm-ipq6018 + - qcom,rpm-ipq9574 + - qcom,rpm-mdm9607 + - qcom,rpm-msm8226 + - qcom,rpm-msm8610 + - qcom,rpm-msm8909 + - qcom,rpm-msm8916 + - qcom,rpm-msm8917 + - qcom,rpm-msm8936 + - qcom,rpm-msm8937 + - qcom,rpm-msm8952 + - qcom,rpm-msm8953 + - qcom,rpm-msm8974 + - qcom,rpm-msm8976 + - qcom,rpm-msm8994 + - qcom,rpm-msm8996 + - qcom,rpm-msm8998 + - qcom,rpm-qcm2290 + - qcom,rpm-qcs404 + - qcom,rpm-sdm660 + - qcom,rpm-sm6115 + - qcom,rpm-sm6125 + - qcom,rpm-sm6375 + + clock-controller: + $ref: /schemas/clock/qcom,rpmcc.yaml# + unevaluatedProperties: false + + power-controller: + $ref: /schemas/power/qcom,rpmpd.yaml# + + qcom,glink-channels: + $ref: /schemas/types.yaml#/definitions/string-array + description: Channel name used for the RPM communication + items: + - const: rpm_requests + + qcom,smd-channels: + $ref: /schemas/types.yaml#/definitions/string-array + description: Channel name used for the RPM communication + items: + - const: rpm_requests + +patternProperties: + "^regulators(-[01])?$": + $ref: /schemas/regulator/qcom,smd-rpm-regulator.yaml# + unevaluatedProperties: false + +if: + properties: + compatible: + contains: + enum: + - qcom,rpm-apq8084 + - qcom,rpm-mdm9607 + - qcom,rpm-msm8226 + - qcom,rpm-msm8610 + - qcom,rpm-msm8909 + - qcom,rpm-msm8916 + - qcom,rpm-msm8917 + - qcom,rpm-msm8936 + - qcom,rpm-msm8937 + - qcom,rpm-msm8952 + - qcom,rpm-msm8953 + - qcom,rpm-msm8974 + - qcom,rpm-msm8976 + - qcom,rpm-msm8994 +then: + properties: + qcom,glink-channels: false + required: + - qcom,smd-channels +else: + properties: + qcom,smd-channels: false + required: + - qcom,glink-channels + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + remoteproc { + compatible = "qcom,msm8916-rpm-proc", "qcom,rpm-proc"; + + smd-edge { + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm-requests { + compatible = "qcom,rpm-msm8916"; + qcom,smd-channels = "rpm_requests"; + + clock-controller { + compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc"; + #clock-cells = <1>; + clocks = <&xo_board>; + clock-names = "xo"; + }; + + power-controller { + compatible = "qcom,msm8916-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-1 { + opp-level = <1>; + }; + opp-2 { + opp-level = <2>; + }; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml new file mode 100644 index 0000000000..4819ce90d2 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,smd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Shared Memory Driver + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + The Qualcomm Shared Memory Driver is a FIFO based communication channel for + sending data between the various subsystems in Qualcomm platforms. + + Using the top-level SMD node is deprecated. Instead, the SMD edges are defined + directly below the device node representing the respective remote subsystem + or remote processor. + +deprecated: true + +properties: + compatible: + const: qcom,smd + +patternProperties: + "^smd-edge|rpm$": + $ref: /schemas/remoteproc/qcom,smd-edge.yaml# + unevaluatedProperties: false + description: + Each subnode of the SMD node represents a remote subsystem or a remote + processor of some sort - or in SMD language an "edge". The name of the + edges are not important. + +required: + - compatible + +additionalProperties: false + +examples: + # The following example represents a smd node, with one edge representing the + # "rpm" subsystem. For the "rpm" subsystem we have a device tied to the + # "rpm_request" channel. + # NOTE: This is deprecated, represent the RPM using "qcom,rpm-proc" instead. + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + shared-memory { + compatible = "qcom,smd"; + + rpm { + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm-requests { + compatible = "qcom,rpm-msm8974"; + qcom,smd-channels = "rpm_requests"; + + clock-controller { + compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc"; + #clock-cells = <1>; + }; + + }; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smem.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smem.yaml new file mode 100644 index 0000000000..bc7815d985 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smem.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,smem.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Shared Memory Manager + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: + This binding describes the Qualcomm Shared Memory Manager, a region of + reserved-memory used to share data between various subsystems and OSes in + Qualcomm platforms. + +properties: + compatible: + const: qcom,smem + + reg: + maxItems: 1 + + memory-region: + maxItems: 1 + description: handle to memory reservation for main SMEM memory region. + + hwlocks: + maxItems: 1 + + qcom,rpm-msg-ram: + $ref: /schemas/types.yaml#/definitions/phandle + description: handle to RPM message memory resource + + no-map: true + +required: + - compatible + - hwlocks + +oneOf: + - required: + - reg + - no-map + - required: + - memory-region + +additionalProperties: false + +examples: + - | + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + smem@fa00000 { + compatible = "qcom,smem"; + reg = <0xfa00000 0x200000>; + no-map; + + hwlocks = <&tcsr_mutex 3>; + }; + }; + - | + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + smem_region: smem@fa00000 { + reg = <0xfa00000 0x200000>; + no-map; + }; + }; + + smem { + compatible = "qcom,smem"; + + memory-region = <&smem_region>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + + hwlocks = <&tcsr_mutex 3>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + rpm_msg_ram: sram@fc428000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0xfc428000 0x4000>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml new file mode 100644 index 0000000000..58500529b9 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.yaml @@ -0,0 +1,145 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,smp2p.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Shared Memory Point 2 Point + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + The Shared Memory Point to Point (SMP2P) protocol facilitates communication + of a single 32-bit value between two processors. Each value has a single + writer (the local side) and a single reader (the remote side). Values are + uniquely identified in the system by the directed edge (local processor ID to + remote processor ID) and a string identifier. + +properties: + compatible: + const: qcom,smp2p + + interrupts: + maxItems: 1 + + mboxes: + maxItems: 1 + description: + Reference to the mailbox representing the outgoing doorbell in APCS for + this client. + + qcom,ipc: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to a syscon node representing the APCS registers + - description: u32 representing offset to the register within the syscon + - description: u32 representing the ipc bit within the register + description: + Three entries specifying the outgoing ipc bit used for signaling the + remote end of the smp2p edge. + + qcom,local-pid: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The identifier of the local endpoint of this edge. + + qcom,remote-pid: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The identifier of the remote endpoint of this edge. + + qcom,smem: + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + maxItems: 2 + description: + Two identifiers of the inbound and outbound smem items used for this edge. + +patternProperties: + "^master-kernel|slave-kernel|ipa-ap-to-modem|ipa-modem-to-ap|wlan-ap-to-wpss|wlan-wpss-to-ap$": + type: object + description: + Each SMP2P pair contain a set of inbound and outbound entries, these are + described in subnodes of the smp2p device node. The node names are not + important. + + properties: + interrupt-controller: + description: + Marks the entry as inbound; the node should be specified as a two + cell interrupt-controller. If not specified this node will denote + the outgoing entry. + + '#interrupt-cells': + const: 2 + + qcom,entry-name: + $ref: /schemas/types.yaml#/definitions/string + description: + The name of this entry, for inbound entries this will be used to + match against the remotely allocated entry and for outbound entries + this name is used for allocating entries. + + '#qcom,smem-state-cells': + $ref: /schemas/types.yaml#/definitions/uint32 + const: 1 + description: + Required for outgoing entries. + + required: + - qcom,entry-name + + oneOf: + - required: + - interrupt-controller + - '#interrupt-cells' + - required: + - '#qcom,smem-state-cells' + + additionalProperties: false + +required: + - compatible + - interrupts + - qcom,local-pid + - qcom,remote-pid + - qcom,smem + +oneOf: + - required: + - mboxes + - required: + - qcom,ipc + +additionalProperties: false + +examples: + # The following example shows the SMP2P setup with the wireless processor, + # defined from the 8974 apps processor's point-of-view. It encompasses one + # inbound and one outbound entry. + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + shared-memory { + compatible = "qcom,smp2p"; + qcom,smem = <431>, <451>; + interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs 8 18>; + qcom,local-pid = <0>; + qcom,remote-pid = <4>; + + wcnss_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + wcnss_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml new file mode 100644 index 0000000000..db67cf0432 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smsm.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,smsm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Shared Memory State Machine + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> + +description: + The Shared Memory State Machine facilitates broadcasting of single bit state + information between the processors in a Qualcomm SoC. Each processor is + assigned 32 bits of state that can be modified. A processor can through a + matrix of bitmaps signal subscription of notifications upon changes to a + certain bit owned by a certain remote processor. + +properties: + compatible: + const: qcom,smsm + + '#address-cells': + const: 1 + + qcom,local-host: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + description: + Identifier of the local processor in the list of hosts, or in other words + specifier of the column in the subscription matrix representing the local + processor. + + '#size-cells': + const: 0 + +patternProperties: + "^qcom,ipc-[1-4]$": + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to a syscon node representing the APCS registers + - description: u32 representing offset to the register within the syscon + - description: u32 representing the ipc bit within the register + description: + Three entries specifying the outgoing ipc bit used for signaling the N:th + remote processor. + + "@[0-9a-f]$": + type: object + description: + Each processor's state bits are described by a subnode of the SMSM device + node. Nodes can either be flagged as an interrupt-controller to denote a + remote processor's state bits or the local processors bits. The node + names are not important. + + properties: + reg: + maxItems: 1 + + interrupt-controller: + description: + Marks the entry as a interrupt-controller and the state bits to + belong to a remote processor. + + '#interrupt-cells': + const: 2 + + interrupts: + maxItems: 1 + description: + One entry specifying remote IRQ used by the remote processor to + signal changes of its state bits. + + '#qcom,smem-state-cells': + $ref: /schemas/types.yaml#/definitions/uint32 + const: 1 + description: + Required for local entry. Denotes bit number. + + required: + - reg + + oneOf: + - required: + - '#qcom,smem-state-cells' + - required: + - interrupt-controller + - '#interrupt-cells' + - interrupts + + additionalProperties: false + +required: + - compatible + - '#address-cells' + - '#size-cells' + +anyOf: + - required: + - qcom,ipc-1 + - required: + - qcom,ipc-2 + - required: + - qcom,ipc-3 + - required: + - qcom,ipc-4 + +additionalProperties: false + +examples: + # The following example shows the SMEM setup for controlling properties of + # the wireless processor, defined from the 8974 apps processor's + # point-of-view. It encompasses one outbound entry and the outgoing interrupt + # for the wireless processor. + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + shared-memory { + compatible = "qcom,smsm"; + #address-cells = <1>; + #size-cells = <0>; + qcom,ipc-3 = <&apcs 8 19>; + + apps_smsm: apps@0 { + reg = <0>; + #qcom,smem-state-cells = <1>; + }; + + wcnss_smsm: wcnss@7 { + reg = <7>; + interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml new file mode 100644 index 0000000000..20c8cd38ff --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,spm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Subsystem Power Manager + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: | + This binding describes the Qualcomm Subsystem Power Manager, used to control + the peripheral logic surrounding the application cores in Qualcomm platforms. + +properties: + compatible: + items: + - enum: + - qcom,sdm660-gold-saw2-v4.1-l2 + - qcom,sdm660-silver-saw2-v4.1-l2 + - qcom,msm8998-gold-saw2-v4.1-l2 + - qcom,msm8998-silver-saw2-v4.1-l2 + - qcom,msm8909-saw2-v3.0-cpu + - qcom,msm8916-saw2-v3.0-cpu + - qcom,msm8939-saw2-v3.0-cpu + - qcom,msm8226-saw2-v2.1-cpu + - qcom,msm8974-saw2-v2.1-cpu + - qcom,msm8976-gold-saw2-v2.3-l2 + - qcom,msm8976-silver-saw2-v2.3-l2 + - qcom,apq8084-saw2-v2.1-cpu + - qcom,apq8064-saw2-v1.1-cpu + - const: qcom,saw2 + + reg: + description: Base address and size of the SPM register region + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + + /* Example 1: SoC using SAW2 and kpss-acc-v2 CPUIdle */ + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "qcom,kryo"; + device_type = "cpu"; + enable-method = "qcom,kpss-acc-v2"; + qcom,saw = <&saw0>; + reg = <0x0>; + operating-points-v2 = <&cpu_opp_table>; + }; + }; + + saw0: power-manager@f9089000 { + compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf9089000 0x1000>; + }; + + - | + + /* + * Example 2: New-gen multi cluster SoC using SAW only for L2; + * This does not require any cpuidle driver, nor any cpu phandle. + */ + power-manager@17812000 { + compatible = "qcom,msm8998-gold-saw2-v4.1-l2", "qcom,saw2"; + reg = <0x17812000 0x1000>; + }; + + power-manager@17912000 { + compatible = "qcom,msm8998-silver-saw2-v4.1-l2", "qcom,saw2"; + reg = <0x17912000 0x1000>; + }; + +... diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml new file mode 100644 index 0000000000..74bb92e315 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml @@ -0,0 +1,134 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,wcnss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm WCNSS + +maintainers: + - Andy Gross <agross@kernel.org> + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: + The Qualcomm WCNSS hardware consists of control block and a BT, WiFi and FM + radio block, all using SMD as command channels. + +properties: + compatible: + const: qcom,wcnss + + firmware-name: + $ref: /schemas/types.yaml#/definitions/string + default: wlan/prima/WCNSS_qcom_wlan_nv.bin + description: + Relative firmware image path for the WLAN NV blob. + + qcom,mmio: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + Reference to a node specifying the wcnss "ccu" and "dxe" register blocks. + The node must be compatible with one of the following:: + - qcom,riva" + - qcom,pronto" + + qcom,smd-channels: + $ref: /schemas/types.yaml#/definitions/string + const: WCNSS_CTRL + description: + Standard SMD property specifying the SMD channel used for communication + with the WiFi firmware. + + bluetooth: + type: object + additionalProperties: false + allOf: + - $ref: /schemas/net/bluetooth/bluetooth-controller.yaml# + properties: + compatible: + const: qcom,wcnss-bt + + local-bd-address: true + + required: + - compatible + + wifi: + additionalProperties: false + type: object + properties: + compatible: + const: qcom,wcnss-wlan + + interrupts: + maxItems: 2 + + interrupt-names: + items: + - const: tx + - const: rx + + qcom,smem-states: + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 2 + description: + Should reference the tx-enable and tx-rings-empty SMEM states. + + qcom,smem-state-names: + items: + - const: tx-enable + - const: tx-rings-empty + description: + Names of SMEM states. + + required: + - compatible + - interrupts + - interrupt-names + - qcom,smem-states + - qcom,smem-state-names + +required: + - compatible + - qcom,mmio + - qcom,smd-channels + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + smd-edge { + interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 17>; + qcom,smd-edge = <6>; + qcom,remote-pid = <4>; + + label = "pronto"; + + wcnss { + compatible = "qcom,wcnss"; + qcom,smd-channels = "WCNSS_CTRL"; + + qcom,mmio = <&pronto>; + + bluetooth { + compatible = "qcom,wcnss-bt"; + /* BD address 00:11:22:33:44:55 */ + local-bd-address = [ 55 44 33 22 11 00 ]; + }; + + wifi { + compatible = "qcom,wcnss-wlan"; + + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; + qcom,smem-state-names = "tx-enable", "tx-rings-empty"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml new file mode 100644 index 0000000000..96a7f18220 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom-stats.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom-stats.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. (QTI) Stats + +maintainers: + - Maulik Shah <quic_mkshah@quicinc.com> + +description: + Always On Processor/Resource Power Manager maintains statistics of the SoC + sleep modes involving powering down of the rails and oscillator clock. + + Statistics includes SoC sleep mode type, number of times low power mode were + entered, time of last entry, time of last exit and accumulated sleep duration. + +properties: + compatible: + enum: + - qcom,rpmh-stats + - qcom,sdm845-rpmh-stats + - qcom,rpm-stats + # For older RPM firmware versions with fixed offset for the sleep stats + - qcom,apq8084-rpm-stats + - qcom,msm8226-rpm-stats + - qcom,msm8916-rpm-stats + - qcom,msm8974-rpm-stats + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + # Example of rpmh sleep stats + - | + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0x0c3f0000 0x400>; + }; + # Example of rpm sleep stats + - | + sram@4690000 { + compatible = "qcom,rpm-stats"; + reg = <0x04690000 0x10000>; + }; +... diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas,r9a09g011-sys.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,r9a09g011-sys.yaml new file mode 100644 index 0000000000..1cac3cb522 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/renesas/renesas,r9a09g011-sys.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/renesas/renesas,r9a09g011-sys.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/V2M System Configuration (SYS) + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +description: + The RZ/V2M-alike SYS (System Configuration) controls the overall + configuration of the LSI and supports the following functions, + - Bank address settings for DMAC + - Bank address settings of the units for ICB + - ETHER AxCACHE[1] (C bit) control function + - RAMA initialization control + - MD[7:0] pin monitoring + - LSI version + - PCIe related settings + - WDT stop control + - Temperature sensor (TSU) monitor + +properties: + compatible: + const: renesas,r9a09g011-sys + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + sys: system-controller@a3f03000 { + compatible = "renesas,r9a09g011-sys"; + reg = <0xa3f03000 0x400>; + }; diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml new file mode 100644 index 0000000000..e52e176d8c --- /dev/null +++ b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/renesas/renesas,rzg2l-sysc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/{G2L,V2L} System Controller (SYSC) + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +description: + The RZ/{G2L,V2L}-alike System Controller (SYSC) performs system control of + the LSI and supports following functions, + - External terminal state capture function + - 34-bit address space access function + - Low power consumption control + - WDT stop control + +properties: + compatible: + enum: + - renesas,r9a07g043-sysc # RZ/G2UL and RZ/Five + - renesas,r9a07g044-sysc # RZ/G2{L,LC} + - renesas,r9a07g054-sysc # RZ/V2L + + reg: + maxItems: 1 + + interrupts: + items: + - description: CA55/CM33 Sleep/Software Standby Mode request interrupt + - description: CA55 Software Standby Mode release request interrupt + - description: CM33 Software Standby Mode release request interrupt + - description: CA55 ACE Asynchronous Bridge Master/Slave interface deny request interrupt + + interrupt-names: + items: + - const: lpm_int + - const: ca55stbydone_int + - const: cm33stbyr_int + - const: ca55_deny + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + sysc: system-controller@11020000 { + compatible = "renesas,r9a07g044-sysc"; + reg = <0x11020000 0x10000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "lpm_int", "ca55stbydone_int", "cm33stbyr_int", + "ca55_deny"; + }; diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas,rzv2m-pwc.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,rzv2m-pwc.yaml new file mode 100644 index 0000000000..12df33f584 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/renesas/renesas,rzv2m-pwc.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/renesas/renesas,rzv2m-pwc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/V2M External Power Sequence Controller (PWC) + +description: |+ + The PWC IP found in the RZ/V2M family of chips comes with the below + capabilities + - external power supply on/off sequence generation + - on/off signal generation for the LPDDR4 core power supply (LPVDD) + - key input signals processing + - general-purpose output pins + +maintainers: + - Fabrizio Castro <fabrizio.castro.jz@renesas.com> + +properties: + compatible: + items: + - enum: + - renesas,r9a09g011-pwc # RZ/V2M + - renesas,r9a09g055-pwc # RZ/V2MA + - const: renesas,rzv2m-pwc + + reg: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + renesas,rzv2m-pwc-power: + description: The PWC is used to control the system power supplies. + type: boolean + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + +additionalProperties: false + +examples: + - | + pwc: pwc@a3700000 { + compatible = "renesas,r9a09g011-pwc", "renesas,rzv2m-pwc"; + reg = <0xa3700000 0x800>; + gpio-controller; + #gpio-cells = <2>; + renesas,rzv2m-pwc-power; + }; diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml new file mode 100644 index 0000000000..53b95f348f --- /dev/null +++ b/Documentation/devicetree/bindings/soc/renesas/renesas.yaml @@ -0,0 +1,479 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/renesas/renesas.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas SH-Mobile, R-Mobile, and R-Car Platform + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: Emma Mobile EV2 + items: + - enum: + - renesas,kzm9d # Kyoto Microcomputer Co. KZM-A9-Dual + - const: renesas,emev2 + + - description: RZ/A1H (R7S72100) + items: + - enum: + - renesas,genmai # Genmai (RTK772100BC00000BR) + - renesas,gr-peach # GR-Peach (X28A-M01-E/F) + - renesas,rskrza1 # RSKRZA1 (YR0K77210C000BE) + - const: renesas,r7s72100 + + - description: RZ/A2 (R7S9210) + items: + - enum: + - renesas,rza2mevb # RZ/A2M Eval Board (RTK7921053S00000BE) + - const: renesas,r7s9210 + + - description: SH-Mobile AG5 (R8A73A00/SH73A0) + items: + - enum: + - renesas,kzm9g # Kyoto Microcomputer Co. KZM-A9-GT + - const: renesas,sh73a0 + + - description: R-Mobile APE6 (R8A73A40) + items: + - enum: + - renesas,ape6evm + - const: renesas,r8a73a4 + + - description: R-Mobile A1 (R8A77400) + items: + - enum: + - renesas,armadillo800eva # Atmark Techno Armadillo-800 EVA + - const: renesas,r8a7740 + + - description: RZ/G1H (R8A77420) + items: + - enum: + # iWave Systems RZ/G1H Qseven System On Module (iW-RainboW-G21M-Qseven) + - iwave,g21m + - const: renesas,r8a7742 + + - items: + - enum: + # iWave Systems RZ/G1H Qseven Development Platform (iW-RainboW-G21D-Qseven) + - iwave,g21d + - const: iwave,g21m + - const: renesas,r8a7742 + + - description: RZ/G1M (R8A77430) + items: + - enum: + # iWave Systems RZ/G1M Qseven Development Platform (iW-RainboW-G20D-Qseven) + - iwave,g20d + - const: iwave,g20m + - const: renesas,r8a7743 + + - items: + - enum: + # iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven) + - iwave,g20m + - renesas,sk-rzg1m # SK-RZG1M (YR8A77430S000BE) + - const: renesas,r8a7743 + + - description: RZ/G1N (R8A77440) + items: + - enum: + # iWave Systems RZ/G1N Qseven Development Platform (iW-RainboW-G20D-Qseven) + - iwave,g20d + - const: iwave,g20m + - const: renesas,r8a7744 + + - items: + - enum: + # iWave Systems RZ/G1N Qseven System On Module (iW-RainboW-G20M-Qseven) + - iwave,g20m + - const: renesas,r8a7744 + + - description: RZ/G1E (R8A77450) + items: + - enum: + - iwave,g22m # iWave Systems RZ/G1E SODIMM System On Module (iW-RainboW-G22M-SM) + - renesas,sk-rzg1e # SK-RZG1E (YR8A77450S000BE) + - const: renesas,r8a7745 + + - description: iWave Systems RZ/G1E SODIMM SOM Development Platform (iW-RainboW-G22D) + items: + - const: iwave,g22d + - const: iwave,g22m + - const: renesas,r8a7745 + + - description: RZ/G1C (R8A77470) + items: + - enum: + - iwave,g23s # iWave Systems RZ/G1C Single Board Computer (iW-RainboW-G23S) + - const: renesas,r8a77470 + + - description: RZ/G2M (R8A774A1) + items: + - enum: + - hoperun,hihope-rzg2m # HopeRun HiHope RZ/G2M platform + - beacon,beacon-rzg2m # Beacon EmbeddedWorks RZ/G2M Kit + - const: renesas,r8a774a1 + + - items: + - enum: + - hoperun,hihope-rzg2-ex # HopeRun expansion board for HiHope RZ/G2 platforms + - const: hoperun,hihope-rzg2m + - const: renesas,r8a774a1 + + - description: RZ/G2N (R8A774B1) + items: + - enum: + - beacon,beacon-rzg2n # Beacon EmbeddedWorks RZ/G2N Kit + - hoperun,hihope-rzg2n # HopeRun HiHope RZ/G2N platform + - const: renesas,r8a774b1 + + - items: + - enum: + - hoperun,hihope-rzg2-ex # HopeRun expansion board for HiHope RZ/G2 platforms + - const: hoperun,hihope-rzg2n + - const: renesas,r8a774b1 + + - description: RZ/G2E (R8A774C0) + items: + - enum: + - si-linux,cat874 # Silicon Linux RZ/G2E 96board platform (CAT874) + - const: renesas,r8a774c0 + + - items: + - enum: + - si-linux,cat875 # Silicon Linux sub board for CAT874 (CAT875) + - const: si-linux,cat874 + - const: renesas,r8a774c0 + + - description: RZ/G2H (R8A774E1) + items: + - enum: + - beacon,beacon-rzg2h # Beacon EmbeddedWorks RZ/G2H Kit + - hoperun,hihope-rzg2h # HopeRun HiHope RZ/G2H platform + - const: renesas,r8a774e1 + + - items: + - enum: + - hoperun,hihope-rzg2-ex # HopeRun expansion board for HiHope RZ/G2 platforms + - const: hoperun,hihope-rzg2h + - const: renesas,r8a774e1 + + - description: R-Car M1A (R8A77781) + items: + - enum: + - renesas,bockw + - const: renesas,r8a7778 + + - description: R-Car H1 (R8A77790) + items: + - enum: + - renesas,marzen # Marzen (R0P7779A00010S) + - const: renesas,r8a7779 + + - description: R-Car H2 (R8A77900) + items: + - enum: + - renesas,lager # Lager (RTP0RC7790SEB00010S) + - renesas,stout # Stout (ADAS Starterkit, Y-R-CAR-ADAS-SKH2-BOARD) + - const: renesas,r8a7790 + + - description: R-Car M2-W (R8A77910) + items: + - enum: + - renesas,henninger + - renesas,koelsch # Koelsch (RTP0RC7791SEB00010S) + - renesas,porter # Porter (M2-LCDP) + - const: renesas,r8a7791 + + - description: R-Car V2H (R8A77920) + items: + - enum: + - renesas,blanche # Blanche (RTP0RC7792SEB00010S) + - renesas,wheat # Wheat (RTP0RC7792ASKB0000JE) + - const: renesas,r8a7792 + + - description: R-Car M2-N (R8A77930) + items: + - enum: + - renesas,gose # Gose (RTP0RC7793SEB00010S) + - const: renesas,r8a7793 + + - description: R-Car E2 (R8A77940) + items: + - enum: + - renesas,alt # Alt (RTP0RC7794SEB00010S) + - renesas,silk # SILK (RTP0RC7794LCB00011S) + - const: renesas,r8a7794 + + # Note: R-Car H3 ES1.* (R8A77950) is not supported upstream anymore! + + - description: R-Car H3 ES2.0 and later (R8A77951) + items: + - enum: + - renesas,h3ulcb # H3ULCB (R-Car Starter Kit Premier, RTP0RC77951SKBX010SA00 (H3 ES2.0)) + - renesas,salvator-x # Salvator-X (RTP0RC7795SIPB0010S) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC7795SIPB0012S) + - const: renesas,r8a7795 + + - description: R-Car M3-W (R8A77960) + items: + - enum: + - renesas,m3ulcb # M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKBX0010SA09 (M3 ES1.0)) + - renesas,salvator-x # Salvator-X (RTP0RC7796SIPB0011S) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC7796SIPB0012S) + - const: renesas,r8a7796 + + - description: R-Car M3-W+ (R8A77961) + items: + - enum: + - renesas,m3ulcb # M3ULCB (R-Car Starter Kit Pro, RTP8J77961ASKB0SK0SA05A (M3 ES3.0)) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC7796SIPB0012SA5A) + - const: renesas,r8a77961 + + - description: Kingfisher (SBEV-RCAR-KF-M03) + oneOf: + - items: + - const: shimafuji,kingfisher + - enum: + - renesas,h3ulcb + - renesas,m3ulcb + - renesas,m3nulcb + - enum: + - renesas,r8a7795 + - renesas,r8a7796 + - renesas,r8a77961 + - renesas,r8a77965 + - items: + - const: shimafuji,kingfisher + - enum: + - renesas,h3ulcb + - renesas,m3ulcb + - renesas,m3nulcb + - enum: + - renesas,r8a779m0 + - renesas,r8a779m1 + - renesas,r8a779m2 + - renesas,r8a779m3 + - renesas,r8a779m4 + - renesas,r8a779m5 + - renesas,r8a779m8 + - renesas,r8a779mb + - enum: + - renesas,r8a7795 + - renesas,r8a77961 + - renesas,r8a77965 + + - description: R-Car M3-N (R8A77965) + items: + - enum: + - renesas,m3nulcb # M3NULCB (R-Car Starter Kit Pro, RTP0RC77965SKBX010SA00 (M3-N ES1.1)) + - renesas,salvator-x # Salvator-X (RTP0RC7796SIPB0011S (M3-N)) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version, RTP0RC77965SIPB012S) + - const: renesas,r8a77965 + + - description: R-Car V3M (R8A77970) + items: + - enum: + - renesas,eagle # Eagle (RTP0RC77970SEB0010S) + - renesas,v3msk # V3MSK (Y-ASK-RCAR-V3M-WS10) + - const: renesas,r8a77970 + + - description: R-Car V3H (R8A77980) + items: + - enum: + - renesas,condor # Condor (RTP0RC77980SEB0010SS/RTP0RC77980SEB0010SA01) + - renesas,v3hsk # V3HSK (Y-ASK-RCAR-V3H-WS10) + - const: renesas,r8a77980 + + - description: R-Car V3H2 (R8A77980A) + items: + - enum: + - renesas,condor-i # Condor-I (RTP0RC77980SEBS012SA01) + - const: renesas,r8a77980a + - const: renesas,r8a77980 + + - description: R-Car E3 (R8A77990) + items: + - enum: + - renesas,ebisu # Ebisu (RTP0RC77990SEB0010S) + - const: renesas,r8a77990 + + - description: R-Car D3 (R8A77995) + items: + - enum: + - renesas,draak # Draak (RTP0RC77995SEB0010S) + - const: renesas,r8a77995 + + - description: R-Car V3U (R8A779A0) + items: + - enum: + - renesas,falcon-cpu # Falcon CPU board (RTP0RC779A0CPB0010S) + - const: renesas,r8a779a0 + + - items: + - enum: + - renesas,falcon-breakout # Falcon BreakOut board (RTP0RC779A0BOB0010S) + - const: renesas,falcon-cpu + - const: renesas,r8a779a0 + + - description: R-Car S4-8 (R8A779F0) + items: + - enum: + - renesas,spider-cpu # Spider CPU board (RTP8A779F0ASKB0SC2S) + - const: renesas,r8a779f0 + + - items: + - enum: + - renesas,spider-breakout # Spider BreakOut board (RTP8A779F0ASKB0SB0S) + - const: renesas,spider-cpu + - const: renesas,r8a779f0 + + - description: R-Car V4H (R8A779G0) + items: + - enum: + - renesas,white-hawk-cpu # White Hawk CPU board (RTP8A779G0ASKB0FC0SA000) + - const: renesas,r8a779g0 + + - items: + - enum: + - renesas,white-hawk-breakout # White Hawk BreakOut board (RTP8A779G0ASKB0SB0SA000) + - const: renesas,white-hawk-cpu + - const: renesas,r8a779g0 + + - description: R-Car H3e (R8A779M0) + items: + - enum: + - renesas,h3ulcb # H3ULCB (R-Car Starter Kit Premier) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version) + - const: renesas,r8a779m0 + - const: renesas,r8a7795 + + - description: R-Car H3e-2G (R8A779M1) + items: + - enum: + - renesas,h3ulcb # H3ULCB (R-Car Starter Kit Premier) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version) + - const: renesas,r8a779m1 + - const: renesas,r8a7795 + + - description: R-Car M3e (R8A779M2) + items: + - enum: + - renesas,m3ulcb # M3ULCB (R-Car Starter Kit Pro) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version) + - const: renesas,r8a779m2 + - const: renesas,r8a77961 + + - description: R-Car M3e-2G (R8A779M3) + items: + - enum: + - renesas,m3ulcb # M3ULCB (R-Car Starter Kit Pro) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version) + - const: renesas,r8a779m3 + - const: renesas,r8a77961 + + - description: R-Car M3Ne (R8A779M4) + items: + - enum: + - renesas,m3nulcb # M3NULCB (R-Car Starter Kit Pro) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version) + - const: renesas,r8a779m4 + - const: renesas,r8a77965 + + - description: R-Car M3Ne-2G (R8A779M5) + items: + - enum: + - renesas,m3nulcb # M3NULCB (R-Car Starter Kit Pro) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version) + - const: renesas,r8a779m5 + - const: renesas,r8a77965 + + - description: R-Car E3e (R8A779M6) + items: + - enum: + - renesas,ebisu # Ebisu + - const: renesas,r8a779m6 + - const: renesas,r8a77990 + + - description: R-Car D3e (R8A779M7) + items: + - enum: + - renesas,draak # Draak + - const: renesas,r8a779m7 + - const: renesas,r8a77995 + + - description: R-Car H3Ne (R8A779M8) + items: + - enum: + - renesas,h3ulcb # H3ULCB (R-Car Starter Kit Premier) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version) + - const: renesas,r8a779m8 + - const: renesas,r8a7795 + + - description: R-Car H3Ne-1.7G (R8A779MB) + items: + - enum: + - renesas,h3ulcb # H3ULCB (R-Car Starter Kit Premier) + - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version) + - const: renesas,r8a779mb + - const: renesas,r8a7795 + + - description: RZ/N1D (R9A06G032) + items: + - enum: + - renesas,rzn1d400-db # RZN1D-DB (RZ/N1D Demo Board for the RZ/N1D 400 pins package) + - const: renesas,r9a06g032 + + - description: RZ/N1{D,S} EB + items: + - enum: + - renesas,rzn1d400-eb # RZN1D-EB (Expansion Board when using a RZN1D-DB) + - const: renesas,rzn1d400-db + - const: renesas,r9a06g032 + + - description: RZ/Five and RZ/G2UL (R9A07G043) + items: + - enum: + - renesas,smarc-evk # SMARC EVK + - enum: + - renesas,r9a07g043f01 # RZ/Five + - renesas,r9a07g043u11 # RZ/G2UL Type-1 + - renesas,r9a07g043u12 # RZ/G2UL Type-2 + - const: renesas,r9a07g043 + + - description: RZ/G2{L,LC} (R9A07G044) + items: + - enum: + - renesas,smarc-evk # SMARC EVK + - enum: + - renesas,r9a07g044c1 # Single Cortex-A55 RZ/G2LC + - renesas,r9a07g044c2 # Dual Cortex-A55 RZ/G2LC + - renesas,r9a07g044l1 # Single Cortex-A55 RZ/G2L + - renesas,r9a07g044l2 # Dual Cortex-A55 RZ/G2L + - const: renesas,r9a07g044 + + - description: RZ/V2L (R9A07G054) + items: + - enum: + - renesas,smarc-evk # SMARC EVK + - enum: + - renesas,r9a07g054l1 # Single Cortex-A55 RZ/V2L + - renesas,r9a07g054l2 # Dual Cortex-A55 RZ/V2L + - const: renesas,r9a07g054 + + - description: RZ/V2M (R9A09G011) + items: + - enum: + - renesas,rzv2mevk2 # RZ/V2M Eval Board v2.0 + - const: renesas,r9a09g011 + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml new file mode 100644 index 0000000000..e4fa6a07b4 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml @@ -0,0 +1,292 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/rockchip/grf.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip General Register Files (GRF) + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + oneOf: + - items: + - enum: + - rockchip,rk3288-sgrf + - rockchip,rk3566-pipe-grf + - rockchip,rk3568-pcie3-phy-grf + - rockchip,rk3568-pipe-grf + - rockchip,rk3568-pipe-phy-grf + - rockchip,rk3568-usb2phy-grf + - rockchip,rk3588-bigcore0-grf + - rockchip,rk3588-bigcore1-grf + - rockchip,rk3588-ioc + - rockchip,rk3588-php-grf + - rockchip,rk3588-pipe-phy-grf + - rockchip,rk3588-sys-grf + - rockchip,rk3588-pcie3-phy-grf + - rockchip,rk3588-pcie3-pipe-grf + - rockchip,rv1108-usbgrf + - const: syscon + - items: + - enum: + - rockchip,px30-grf + - rockchip,px30-pmugrf + - rockchip,px30-usb2phy-grf + - rockchip,rk3036-grf + - rockchip,rk3066-grf + - rockchip,rk3128-grf + - rockchip,rk3188-grf + - rockchip,rk3228-grf + - rockchip,rk3288-grf + - rockchip,rk3308-core-grf + - rockchip,rk3308-detect-grf + - rockchip,rk3308-grf + - rockchip,rk3308-usb2phy-grf + - rockchip,rk3328-grf + - rockchip,rk3328-usb2phy-grf + - rockchip,rk3368-grf + - rockchip,rk3368-pmugrf + - rockchip,rk3399-grf + - rockchip,rk3399-pmugrf + - rockchip,rk3568-grf + - rockchip,rk3568-pmugrf + - rockchip,rk3588-usb2phy-grf + - rockchip,rv1108-grf + - rockchip,rv1108-pmugrf + - rockchip,rv1126-grf + - rockchip,rv1126-pmugrf + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + +required: + - compatible + - reg + +additionalProperties: + type: object + +allOf: + - if: + properties: + compatible: + contains: + enum: + - rockchip,px30-grf + + then: + properties: + lvds: + type: object + + $ref: /schemas/display/rockchip/rockchip,lvds.yaml# + + unevaluatedProperties: false + + - if: + properties: + compatible: + contains: + const: rockchip,rk3288-grf + + then: + properties: + edp-phy: + type: object + $ref: /schemas/phy/rockchip,rk3288-dp-phy.yaml# + unevaluatedProperties: false + + - if: + properties: + compatible: + contains: + enum: + - rockchip,rk3066-grf + - rockchip,rk3188-grf + - rockchip,rk3288-grf + + then: + properties: + usbphy: + type: object + + $ref: /schemas/phy/rockchip-usb-phy.yaml# + + unevaluatedProperties: false + + - if: + properties: + compatible: + contains: + const: rockchip,rk3328-grf + + then: + properties: + gpio: + type: object + + $ref: /schemas/gpio/rockchip,rk3328-grf-gpio.yaml# + + unevaluatedProperties: false + + power-controller: + type: object + + $ref: /schemas/power/rockchip,power-controller.yaml# + + unevaluatedProperties: false + + - if: + properties: + compatible: + contains: + const: rockchip,rk3399-grf + + then: + properties: + mipi-dphy-rx0: + type: object + + $ref: /schemas/phy/rockchip-mipi-dphy-rx0.yaml# + + unevaluatedProperties: false + + pcie-phy: + description: + Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt + + patternProperties: + "phy@[0-9a-f]+$": + description: + Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt + + - if: + properties: + compatible: + contains: + enum: + - rockchip,px30-pmugrf + - rockchip,rk3036-grf + - rockchip,rk3308-grf + - rockchip,rk3368-pmugrf + + then: + properties: + reboot-mode: + type: object + + $ref: /schemas/power/reset/syscon-reboot-mode.yaml# + + unevaluatedProperties: false + + - if: + properties: + compatible: + contains: + enum: + - rockchip,px30-usb2phy-grf + - rockchip,rk3128-grf + - rockchip,rk3228-grf + - rockchip,rk3308-usb2phy-grf + - rockchip,rk3328-usb2phy-grf + - rockchip,rk3399-grf + - rockchip,rk3588-usb2phy-grf + - rockchip,rv1108-grf + + then: + required: + - "#address-cells" + - "#size-cells" + + patternProperties: + "usb2phy@[0-9a-f]+$": + type: object + + $ref: /schemas/phy/rockchip,inno-usb2phy.yaml# + + unevaluatedProperties: false + + - if: + properties: + compatible: + contains: + enum: + - rockchip,px30-grf + - rockchip,px30-pmugrf + - rockchip,rk3188-grf + - rockchip,rk3228-grf + - rockchip,rk3288-grf + - rockchip,rk3328-grf + - rockchip,rk3368-grf + - rockchip,rk3368-pmugrf + - rockchip,rk3399-grf + - rockchip,rk3399-pmugrf + - rockchip,rk3568-pmugrf + - rockchip,rv1108-grf + - rockchip,rv1108-pmugrf + + then: + properties: + io-domains: + type: object + + $ref: /schemas/power/rockchip-io-domain.yaml# + + unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3399-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/rk3399-power.h> + grf: syscon@ff770000 { + compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd"; + reg = <0xff770000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + + mipi_dphy_rx0: mipi-dphy-rx0 { + compatible = "rockchip,rk3399-mipi-dphy-rx0"; + clocks = <&cru SCLK_MIPIDPHY_REF>, + <&cru SCLK_DPHY_RX0_CFG>, + <&cru PCLK_VIO_GRF>; + clock-names = "dphy-ref", "dphy-cfg", "grf"; + power-domains = <&power RK3399_PD_VIO>; + #phy-cells = <0>; + }; + + u2phy0: usb2phy@e450 { + compatible = "rockchip,rk3399-usb2phy"; + reg = <0xe450 0x10>; + clocks = <&cru SCLK_USB2PHY0_REF>; + clock-names = "phyclk"; + #clock-cells = <0>; + clock-output-names = "clk_usbphy0_480m"; + + u2phy0_host: host-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "linestate"; + }; + + u2phy0_otg: otg-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "otg-bvalid", "otg-id", + "linestate"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml new file mode 100644 index 0000000000..e1d716df5d --- /dev/null +++ b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml @@ -0,0 +1,200 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/samsung/exynos-pmu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC series Power Management Unit (PMU) + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +# Custom select to avoid matching all nodes with 'syscon' +select: + properties: + compatible: + contains: + enum: + - samsung,exynos3250-pmu + - samsung,exynos4210-pmu + - samsung,exynos4212-pmu + - samsung,exynos4412-pmu + - samsung,exynos5250-pmu + - samsung,exynos5260-pmu + - samsung,exynos5410-pmu + - samsung,exynos5420-pmu + - samsung,exynos5433-pmu + - samsung,exynos7-pmu + - samsung,exynos850-pmu + - samsung-s5pv210-pmu + required: + - compatible + +properties: + compatible: + oneOf: + - items: + - enum: + - samsung,exynos3250-pmu + - samsung,exynos4210-pmu + - samsung,exynos4212-pmu + - samsung,exynos4412-pmu + - samsung,exynos5250-pmu + - samsung,exynos5260-pmu + - samsung,exynos5410-pmu + - samsung,exynos5420-pmu + - samsung,exynos5433-pmu + - samsung,exynos7-pmu + - samsung,exynos850-pmu + - samsung-s5pv210-pmu + - const: syscon + - items: + - enum: + - samsung,exynos3250-pmu + - samsung,exynos4210-pmu + - samsung,exynos4212-pmu + - samsung,exynos4412-pmu + - samsung,exynos5250-pmu + - samsung,exynos5420-pmu + - samsung,exynos5433-pmu + - const: simple-mfd + - const: syscon + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + clock-names: + description: + List of clock names for particular CLKOUT mux inputs + minItems: 1 + maxItems: 32 + items: + pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$' + + clocks: + minItems: 1 + maxItems: 32 + + dp-phy: + $ref: /schemas/phy/samsung,dp-video-phy.yaml + unevaluatedProperties: false + + interrupt-controller: + description: + Some PMUs are capable of behaving as an interrupt controller (mostly + to wake up a suspended PMU). + + '#interrupt-cells': + description: + Must be identical to the that of the parent interrupt controller. + const: 3 + + mipi-phy: + $ref: /schemas/phy/samsung,mipi-video-phy.yaml + unevaluatedProperties: false + + reboot-mode: + $ref: /schemas/power/reset/syscon-reboot-mode.yaml + type: object + description: + Reboot mode to alter bootloader behavior for the next boot + + syscon-poweroff: + $ref: /schemas/power/reset/syscon-poweroff.yaml# + type: object + description: + Node for power off method + + syscon-reboot: + $ref: /schemas/power/reset/syscon-reboot.yaml# + type: object + description: + Node for reboot method + +required: + - compatible + - reg + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos3250-pmu + - samsung,exynos4210-pmu + - samsung,exynos4212-pmu + - samsung,exynos4412-pmu + - samsung,exynos5250-pmu + - samsung,exynos5410-pmu + - samsung,exynos5420-pmu + - samsung,exynos5433-pmu + then: + required: + - '#clock-cells' + - clock-names + - clocks + + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos3250-pmu + - samsung,exynos4210-pmu + - samsung,exynos4212-pmu + - samsung,exynos4412-pmu + - samsung,exynos5250-pmu + - samsung,exynos5420-pmu + - samsung,exynos5433-pmu + then: + properties: + mipi-phy: true + else: + properties: + mipi-phy: false + + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos5250-pmu + - samsung,exynos5420-pmu + - samsung,exynos5433-pmu + then: + properties: + dp-phy: true + else: + properties: + dp-phy: false + +examples: + - | + #include <dt-bindings/clock/exynos5250.h> + + pmu_system_controller: system-controller@10040000 { + compatible = "samsung,exynos5250-pmu", "syscon"; + reg = <0x10040000 0x5000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + #clock-cells = <1>; + clock-names = "clkout16"; + clocks = <&clock CLK_FIN_PLL>; + + dp-phy { + compatible = "samsung,exynos5250-dp-video-phy"; + #phy-cells = <0>; + }; + + mipi-phy { + compatible = "samsung,s5pv210-mipi-video-phy"; + #phy-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml new file mode 100644 index 0000000000..a6836904a4 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml @@ -0,0 +1,167 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/samsung/exynos-usi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung's Exynos USI (Universal Serial Interface) + +maintainers: + - Sam Protsenko <semen.protsenko@linaro.org> + - Krzysztof Kozlowski <krzk@kernel.org> + +description: | + USI IP-core provides selectable serial protocol (UART, SPI or High-Speed I2C). + USI shares almost all internal circuits within each protocol, so only one + protocol can be chosen at a time. USI is modeled as a node with zero or more + child nodes, each representing a serial sub-node device. The mode setting + selects which particular function will be used. + +properties: + $nodename: + pattern: "^usi@[0-9a-f]+$" + + compatible: + oneOf: + - items: + - const: samsung,exynosautov9-usi + - const: samsung,exynos850-usi + - enum: + - samsung,exynos850-usi + + reg: true + + clocks: true + + clock-names: true + + ranges: true + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + samsung,sysreg: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to System Register syscon node + - description: offset of SW_CONF register for this USI controller + description: + Should be phandle/offset pair. The phandle to System Register syscon node + (for the same domain where this USI controller resides) and the offset + of SW_CONF register for this USI controller. + + samsung,mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Selects USI function (which serial protocol to use). Refer to + <include/dt-bindings/soc/samsung,exynos-usi.h> for valid USI mode values. + + samsung,clkreq-on: + type: boolean + description: + Enable this property if underlying protocol requires the clock to be + continuously provided without automatic gating. As suggested by SoC + manual, it should be set in case of SPI/I2C slave, UART Rx and I2C + multi-master mode. Usually this property is needed if USI mode is set + to "UART". + + This property is optional. + +patternProperties: + "^i2c@[0-9a-f]+$": + $ref: /schemas/i2c/i2c-exynos5.yaml + description: Child node describing underlying I2C + + "^serial@[0-9a-f]+$": + $ref: /schemas/serial/samsung_uart.yaml + description: Child node describing underlying UART/serial + + "^spi@[0-9a-f]+$": + $ref: /schemas/spi/samsung,spi.yaml + description: Child node describing underlying SPI + +required: + - compatible + - ranges + - "#address-cells" + - "#size-cells" + - samsung,sysreg + - samsung,mode + +if: + properties: + compatible: + contains: + enum: + - samsung,exynos850-usi + +then: + properties: + reg: + maxItems: 1 + + clocks: + items: + - description: Bus (APB) clock + - description: Operating clock for UART/SPI/I2C protocol + + clock-names: + items: + - const: pclk + - const: ipclk + + required: + - reg + - clocks + - clock-names + +else: + properties: + reg: false + clocks: false + clock-names: false + samsung,clkreq-on: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/soc/samsung,exynos-usi.h> + + usi0: usi@138200c0 { + compatible = "samsung,exynos850-usi"; + reg = <0x138200c0 0x20>; + samsung,sysreg = <&sysreg_peri 0x1010>; + samsung,mode = <USI_V2_UART>; + samsung,clkreq-on; /* needed for UART mode */ + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&cmu_peri 32>, <&cmu_peri 31>; + clock-names = "pclk", "ipclk"; + + serial_0: serial@13820000 { + compatible = "samsung,exynos850-uart"; + reg = <0x13820000 0xc0>; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_peri 32>, <&cmu_peri 31>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + hsi2c_0: i2c@13820000 { + compatible = "samsung,exynosautov9-hsi2c"; + reg = <0x13820000 0xc0>; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu_peri 31>, <&cmu_peri 32>; + clock-names = "hsi2c", "hsi2c_pclk"; + status = "disabled"; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml b/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml new file mode 100644 index 0000000000..163e912e9c --- /dev/null +++ b/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/samsung/samsung,exynos-sysreg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung Exynos SoC series System Registers (SYSREG) + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +properties: + compatible: + oneOf: + - items: + - enum: + - samsung,exynos3-sysreg + - samsung,exynos4-sysreg + - samsung,exynos5-sysreg + - tesla,fsd-cam-sysreg + - tesla,fsd-fsys0-sysreg + - tesla,fsd-fsys1-sysreg + - tesla,fsd-peric-sysreg + - const: syscon + - items: + - enum: + - samsung,exynos5433-cam0-sysreg + - samsung,exynos5433-cam1-sysreg + - samsung,exynos5433-disp-sysreg + - samsung,exynos5433-fsys-sysreg + - const: samsung,exynos5433-sysreg + - const: syscon + - items: + - enum: + - samsung,exynos5433-sysreg + - samsung,exynos850-sysreg + - samsung,exynosautov9-sysreg + - const: syscon + deprecated: true + - items: + - enum: + - samsung,exynos850-cmgp-sysreg + - samsung,exynos850-peri-sysreg + - const: samsung,exynos850-sysreg + - const: syscon + - items: + - enum: + - samsung,exynosautov9-fsys2-sysreg + - samsung,exynosautov9-peric0-sysreg + - samsung,exynosautov9-peric1-sysreg + - const: samsung,exynosautov9-sysreg + - const: syscon + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + +allOf: + - if: + properties: + compatible: + contains: + enum: + - samsung,exynos850-cmgp-sysreg + - samsung,exynos850-peri-sysreg + - samsung,exynos850-sysreg + then: + required: + - clocks + else: + properties: + clocks: false + +additionalProperties: false + +examples: + - | + system-controller@10010000 { + compatible = "samsung,exynos4-sysreg", "syscon"; + reg = <0x10010000 0x400>; + }; diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-adamv.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-adamv.yaml new file mode 100644 index 0000000000..32d9cc2d72 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-adamv.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-adamv.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier ADAMV block + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +description: |+ + ADAMV block implemented on Socionext UniPhier SoCs is an analog signal + amplifier that is a part of the external video and audio I/O system. + + This block is defined for controlling audio I/O reset only. + +properties: + compatible: + items: + - enum: + - socionext,uniphier-ld11-adamv + - socionext,uniphier-ld20-adamv + - const: simple-mfd + - const: syscon + + reg: + maxItems: 1 + + reset-controller: + $ref: /schemas/reset/socionext,uniphier-reset.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + syscon@57920000 { + compatible = "socionext,uniphier-ld20-adamv", + "simple-mfd", "syscon"; + reg = <0x57920000 0x1000>; + + reset-controller { + compatible = "socionext,uniphier-ld20-adamv-reset"; + #reset-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-ahci-glue.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-ahci-glue.yaml new file mode 100644 index 0000000000..09f861cc06 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-ahci-glue.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-ahci-glue.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier SoC AHCI glue layer + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +description: |+ + AHCI glue layer implemented on Socionext UniPhier SoCs is a sideband + logic handling signals to AHCI host controller inside AHCI component. + +properties: + compatible: + items: + - enum: + - socionext,uniphier-pro4-ahci-glue + - socionext,uniphier-pxs2-ahci-glue + - socionext,uniphier-pxs3-ahci-glue + - const: simple-mfd + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + +patternProperties: + "^reset-controller@[0-9a-f]+$": + $ref: /schemas/reset/socionext,uniphier-glue-reset.yaml# + + "phy@[0-9a-f]+$": + $ref: /schemas/phy/socionext,uniphier-ahci-phy.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + sata-controller@65700000 { + compatible = "socionext,uniphier-pxs3-ahci-glue", "simple-mfd"; + reg = <0x65b00000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65700000 0x100>; + + reset-controller@0 { + compatible = "socionext,uniphier-pxs3-ahci-reset"; + reg = <0x0 0x4>; + clock-names = "link"; + clocks = <&sys_clk 28>; + reset-names = "link"; + resets = <&sys_rst 28>; + #reset-cells = <1>; + }; + + phy@10 { + compatible = "socionext,uniphier-pxs3-ahci-phy"; + reg = <0x10 0x10>; + clock-names = "link", "phy"; + clocks = <&sys_clk 28>, <&sys_clk 30>; + reset-names = "link", "phy"; + resets = <&sys_rst 28>, <&sys_rst 30>; + #phy-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml new file mode 100644 index 0000000000..bd0def7236 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-dwc3-glue.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-dwc3-glue.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier SoC DWC3 USB3.0 glue layer + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +description: |+ + DWC3 USB3.0 glue layer implemented on Socionext UniPhier SoCs is + a sideband logic handling signals to DWC3 host controller inside + USB3.0 component. + +properties: + compatible: + items: + - enum: + - socionext,uniphier-pro4-dwc3-glue + - socionext,uniphier-pro5-dwc3-glue + - socionext,uniphier-pxs2-dwc3-glue + - socionext,uniphier-ld20-dwc3-glue + - socionext,uniphier-pxs3-dwc3-glue + - socionext,uniphier-nx1-dwc3-glue + - const: simple-mfd + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + +patternProperties: + "^reset-controller@[0-9a-f]+$": + $ref: /schemas/reset/socionext,uniphier-glue-reset.yaml# + + "^regulator@[0-9a-f]+$": + $ref: /schemas/regulator/socionext,uniphier-regulator.yaml# + + "^phy@[0-9a-f]+$": + oneOf: + - $ref: /schemas/phy/socionext,uniphier-usb3hs-phy.yaml# + - $ref: /schemas/phy/socionext,uniphier-usb3ss-phy.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + usb@65b00000 { + compatible = "socionext,uniphier-ld20-dwc3-glue", "simple-mfd"; + reg = <0x65b00000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65b00000 0x400>; + + reset-controller@0 { + compatible = "socionext,uniphier-ld20-usb3-reset"; + reg = <0x0 0x4>; + #reset-cells = <1>; + clock-names = "link"; + clocks = <&sys_clk 14>; + reset-names = "link"; + resets = <&sys_rst 14>; + }; + + regulator@100 { + compatible = "socionext,uniphier-ld20-usb3-regulator"; + reg = <0x100 0x10>; + clock-names = "link"; + clocks = <&sys_clk 14>; + reset-names = "link"; + resets = <&sys_rst 14>; + }; + + phy@200 { + compatible = "socionext,uniphier-ld20-usb3-hsphy"; + reg = <0x200 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 16>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 16>; + }; + + phy@300 { + compatible = "socionext,uniphier-ld20-usb3-ssphy"; + reg = <0x300 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 18>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 18>; + }; + }; + diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-mioctrl.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-mioctrl.yaml new file mode 100644 index 0000000000..2cc38bb503 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-mioctrl.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-mioctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier media I/O block (MIO) controller + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +description: |+ + Media I/O block implemented on Socionext UniPhier SoCs is a legacy + integrated component of the stream type peripherals including USB2.0, + SD/eMMC, and MIO-DMAC. + Media I/O block has a common logic to control the component. + + Recent SoCs have SD interface logic specialized only for SD functions + as a subset of media I/O block. See socionext,uniphier-sdctrl.yaml. + +properties: + compatible: + items: + - enum: + - socionext,uniphier-ld4-mioctrl + - socionext,uniphier-pro4-mioctrl + - socionext,uniphier-sld8-mioctrl + - socionext,uniphier-ld11-mioctrl + - const: simple-mfd + - const: syscon + + reg: + maxItems: 1 + + clock-controller: + $ref: /schemas/clock/socionext,uniphier-clock.yaml# + + reset-controller: + $ref: /schemas/reset/socionext,uniphier-reset.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + syscon@5b3e0000 { + compatible = "socionext,uniphier-ld11-mioctrl", + "simple-mfd", "syscon"; + reg = <0x5b3e0000 0x800>; + + clock-controller { + compatible = "socionext,uniphier-ld11-mio-clock"; + #clock-cells = <1>; + }; + + reset-controller { + compatible = "socionext,uniphier-ld11-mio-reset"; + #reset-cells = <1>; + resets = <&sys_rst 7>; + }; + }; + diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-perictrl.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-perictrl.yaml new file mode 100644 index 0000000000..0adcffe859 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-perictrl.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-perictrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier peripheral block controller + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +description: |+ + Peripheral block implemented on Socionext UniPhier SoCs is an integrated + component of the peripherals including UART, I2C/FI2C, and SCSSI. + Peripheral block controller is a logic to control the component. + +properties: + compatible: + items: + - enum: + - socionext,uniphier-ld4-perictrl + - socionext,uniphier-pro4-perictrl + - socionext,uniphier-pro5-perictrl + - socionext,uniphier-pxs2-perictrl + - socionext,uniphier-sld8-perictrl + - socionext,uniphier-ld11-perictrl + - socionext,uniphier-ld20-perictrl + - socionext,uniphier-pxs3-perictrl + - socionext,uniphier-nx1-perictrl + - const: simple-mfd + - const: syscon + + reg: + maxItems: 1 + + clock-controller: + $ref: /schemas/clock/socionext,uniphier-clock.yaml# + + reset-controller: + $ref: /schemas/reset/socionext,uniphier-reset.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + syscon@59820000 { + compatible = "socionext,uniphier-ld20-perictrl", + "simple-mfd", "syscon"; + reg = <0x59820000 0x200>; + + clock-controller { + compatible = "socionext,uniphier-ld20-peri-clock"; + #clock-cells = <1>; + }; + + reset-controller { + compatible = "socionext,uniphier-ld20-peri-reset"; + #reset-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-sdctrl.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-sdctrl.yaml new file mode 100644 index 0000000000..cb3b0d4273 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-sdctrl.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-sdctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier SD interface logic + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +description: |+ + SD interface logic implemented on Socionext UniPhier SoCs is + attached outside SDHC, and has some SD related functions such as + clock control, reset control, mode switch, and so on. + +properties: + compatible: + items: + - enum: + - socionext,uniphier-pro5-sdctrl + - socionext,uniphier-pxs2-sdctrl + - socionext,uniphier-ld11-sdctrl + - socionext,uniphier-ld20-sdctrl + - socionext,uniphier-pxs3-sdctrl + - socionext,uniphier-nx1-sdctrl + - const: simple-mfd + - const: syscon + + reg: + maxItems: 1 + + clock-controller: + $ref: /schemas/clock/socionext,uniphier-clock.yaml# + + reset-controller: + $ref: /schemas/reset/socionext,uniphier-reset.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + syscon@59810000 { + compatible = "socionext,uniphier-ld20-sdctrl", + "simple-mfd", "syscon"; + reg = <0x59810000 0x400>; + + clock-controller { + compatible = "socionext,uniphier-ld20-sd-clock"; + #clock-cells = <1>; + }; + + reset-controller { + compatible = "socionext,uniphier-ld20-sd-reset"; + #reset-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-soc-glue-debug.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-soc-glue-debug.yaml new file mode 100644 index 0000000000..1341544d1d --- /dev/null +++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-soc-glue-debug.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-soc-glue-debug.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier SoC-glue logic debug part + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +description: |+ + SoC-glue logic debug part implemented on Socionext UniPhier SoCs is + a collection of miscellaneous function registers handling signals outside + system components for debug and monitor use. + +properties: + compatible: + items: + - enum: + - socionext,uniphier-ld4-soc-glue-debug + - socionext,uniphier-pro4-soc-glue-debug + - socionext,uniphier-pro5-soc-glue-debug + - socionext,uniphier-pxs2-soc-glue-debug + - socionext,uniphier-sld8-soc-glue-debug + - socionext,uniphier-ld11-soc-glue-debug + - socionext,uniphier-ld20-soc-glue-debug + - socionext,uniphier-pxs3-soc-glue-debug + - socionext,uniphier-nx1-soc-glue-debug + - const: simple-mfd + - const: syscon + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + +patternProperties: + "^efuse@[0-9a-f]+$": + $ref: /schemas/nvmem/socionext,uniphier-efuse.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + syscon@5f900000 { + compatible = "socionext,uniphier-pxs2-soc-glue-debug", + "simple-mfd", "syscon"; + reg = <0x5f900000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x5f900000 0x2000>; + + efuse@100 { + compatible = "socionext,uniphier-efuse"; + reg = <0x100 0x28>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-soc-glue.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-soc-glue.yaml new file mode 100644 index 0000000000..7845dcfca9 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-soc-glue.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-soc-glue.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier SoC-glue logic + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +description: |+ + SoC-glue logic implemented on Socionext UniPhier SoCs is a collection of + miscellaneous function registers handling signals outside system components. + +properties: + compatible: + items: + - enum: + - socionext,uniphier-ld4-soc-glue + - socionext,uniphier-pro4-soc-glue + - socionext,uniphier-pro5-soc-glue + - socionext,uniphier-pxs2-soc-glue + - socionext,uniphier-sld8-soc-glue + - socionext,uniphier-ld11-soc-glue + - socionext,uniphier-ld20-soc-glue + - socionext,uniphier-pxs3-soc-glue + - socionext,uniphier-nx1-soc-glue + - const: simple-mfd + - const: syscon + + reg: + maxItems: 1 + + pinctrl: + $ref: /schemas/pinctrl/socionext,uniphier-pinctrl.yaml# + + usb-hub: + $ref: /schemas/phy/socionext,uniphier-usb2-phy.yaml# + + clock-controller: + $ref: /schemas/clock/socionext,uniphier-clock.yaml# + +allOf: + - if: + not: + properties: + compatible: + contains: + enum: + - socionext,uniphier-pro4-soc-glue + - socionext,uniphier-ld11-soc-glue + then: + properties: + usb-hub: false + + - if: + not: + properties: + compatible: + contains: + const: socionext,uniphier-pro4-soc-glue + then: + properties: + clock-controller: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + syscon@5f800000 { + compatible = "socionext,uniphier-pro4-soc-glue", + "simple-mfd", "syscon"; + reg = <0x5f800000 0x2000>; + + pinctrl { + compatible = "socionext,uniphier-pro4-pinctrl"; + }; + + usb-hub { + compatible = "socionext,uniphier-pro4-usb2-phy"; + #address-cells = <1>; + #size-cells = <0>; + + phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + + phy@2 { + reg = <2>; + #phy-cells = <0>; + }; + + phy@3 { + reg = <3>; + #phy-cells = <0>; + }; + }; + + clock-controller { + compatible = "socionext,uniphier-pro4-sg-clock"; + #clock-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-sysctrl.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-sysctrl.yaml new file mode 100644 index 0000000000..3acb14201d --- /dev/null +++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-sysctrl.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-sysctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Socionext UniPhier system controller + +maintainers: + - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> + +description: |+ + System controller implemented on Socionext UniPhier SoCs has multiple + functions such as clock control, reset control, internal watchdog timer, + thermal management, and so on. + +properties: + compatible: + items: + - enum: + - socionext,uniphier-ld4-sysctrl + - socionext,uniphier-pro4-sysctrl + - socionext,uniphier-pro5-sysctrl + - socionext,uniphier-pxs2-sysctrl + - socionext,uniphier-sld8-sysctrl + - socionext,uniphier-ld11-sysctrl + - socionext,uniphier-ld20-sysctrl + - socionext,uniphier-pxs3-sysctrl + - socionext,uniphier-nx1-sysctrl + - const: simple-mfd + - const: syscon + + reg: + maxItems: 1 + + clock-controller: + $ref: /schemas/clock/socionext,uniphier-clock.yaml# + + reset-controller: + $ref: /schemas/reset/socionext,uniphier-reset.yaml# + + watchdog: + $ref: /schemas/watchdog/socionext,uniphier-wdt.yaml# + + thermal-sensor: + $ref: /schemas/thermal/socionext,uniphier-thermal.yaml# + +allOf: + - if: + properties: + compatible: + contains: + const: socionext,uniphier-ld4-sysctrl + then: + properties: + watchdog: false + + - if: + properties: + compatible: + contains: + enum: + - socionext,uniphier-ld4-sysctrl + - socionext,uniphier-pro4-sysctrl + - socionext,uniphier-sld8-sysctrl + - socionext,uniphier-ld11-sysctrl + then: + properties: + thermal-sensor: false + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + syscon@61840000 { + compatible = "socionext,uniphier-ld20-sysctrl", + "simple-mfd", "syscon"; + reg = <0x61840000 0x4000>; + + clock-controller { + compatible = "socionext,uniphier-ld20-clock"; + #clock-cells = <1>; + }; + + reset-controller { + compatible = "socionext,uniphier-ld20-reset"; + #reset-cells = <1>; + }; + + watchdog { + compatible = "socionext,uniphier-wdt"; + }; + + thermal-sensor { + compatible = "socionext,uniphier-ld20-thermal"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + #thermal-sensor-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml b/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml new file mode 100644 index 0000000000..0039319e91 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/starfive/starfive,jh7110-syscon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: StarFive JH7110 SoC system controller + +maintainers: + - William Qiu <william.qiu@starfivetech.com> + +description: + The StarFive JH7110 SoC system controller provides register information such + as offset, mask and shift to configure related modules such as MMC and PCIe. + +properties: + compatible: + oneOf: + - items: + - const: starfive,jh7110-sys-syscon + - const: syscon + - const: simple-mfd + - items: + - enum: + - starfive,jh7110-aon-syscon + - starfive,jh7110-stg-syscon + - const: syscon + + reg: + maxItems: 1 + + clock-controller: + $ref: /schemas/clock/starfive,jh7110-pll.yaml# + type: object + + "#power-domain-cells": + const: 1 + +required: + - compatible + - reg + +allOf: + - if: + properties: + compatible: + contains: + const: starfive,jh7110-sys-syscon + then: + required: + - clock-controller + else: + properties: + clock-controller: false + - if: + properties: + compatible: + contains: + const: starfive,jh7110-aon-syscon + then: + required: + - "#power-domain-cells" + else: + properties: + "#power-domain-cells": false + +additionalProperties: false + +examples: + - | + syscon@10240000 { + compatible = "starfive,jh7110-stg-syscon", "syscon"; + reg = <0x10240000 0x1000>; + }; + + syscon@13030000 { + compatible = "starfive,jh7110-sys-syscon", "syscon", "simple-mfd"; + reg = <0x13030000 0x1000>; + + clock-controller { + compatible = "starfive,jh7110-pll"; + clocks = <&osc>; + #clock-cells = <1>; + }; + }; + + syscon@17010000 { + compatible = "starfive,jh7110-aon-syscon", "syscon"; + reg = <0x17010000 0x1000>; + #power-domain-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/soc/tegra/nvidia,nvec.yaml b/Documentation/devicetree/bindings/soc/tegra/nvidia,nvec.yaml new file mode 100644 index 0000000000..d5261ce3a6 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/tegra/nvidia,nvec.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/tegra/nvidia,nvec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA compliant embedded controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + const: nvidia,nvec + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: divider clock + - description: fast clock + + clock-names: + minItems: 1 + items: + - const: div-clk + - const: fast-clk + + resets: + items: + - description: module reset + + reset-names: + items: + - const: i2c + + clock-frequency: true + + request-gpios: + description: phandle to the GPIO used for EC request + + slave-addr: + $ref: /schemas/types.yaml#/definitions/uint32 + description: I2C address of the slave controller + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - reset-names + - clock-frequency + - request-gpios + - slave-addr + +examples: + - | + #include <dt-bindings/clock/tegra20-car.h> + #include <dt-bindings/gpio/tegra-gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + i2c@7000c500 { + compatible = "nvidia,nvec"; + reg = <0x7000c500 0x100>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <80000>; + request-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; + slave-addr = <138>; + clocks = <&tegra_car TEGRA20_CLK_I2C3>, + <&tegra_car TEGRA20_CLK_PLL_P_OUT3>; + clock-names = "div-clk", "fast-clk"; + resets = <&tegra_car 67>; + reset-names = "i2c"; + }; diff --git a/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-ahb.yaml b/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-ahb.yaml new file mode 100644 index 0000000000..2f7269a26b --- /dev/null +++ b/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-ahb.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/tegra/nvidia,tegra20-ahb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +title: NVIDIA Tegra AHB + +properties: + compatible: + oneOf: + - enum: + - nvidia,tegra20-ahb + - nvidia,tegra30-ahb + - items: + - enum: + - nvidia,tegra114-ahb + - nvidia,tegra124-ahb + - nvidia,tegra210-ahb + - const: nvidia,tegra30-ahb + + reg: + maxItems: 1 + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + ahb@6000c004 { + compatible = "nvidia,tegra20-ahb"; + reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */ + }; diff --git a/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-flowctrl.yaml b/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-flowctrl.yaml new file mode 100644 index 0000000000..705544b7f9 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-flowctrl.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/tegra/nvidia,tegra20-flowctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra Flow Controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +properties: + compatible: + oneOf: + - enum: + - nvidia,tegra20-flowctrl + - nvidia,tegra30-flowctrl + - nvidia,tegra114-flowctrl + - nvidia,tegra124-flowctrl + - nvidia,tegra210-flowctrl + + - items: + - const: nvidia,tegra132-flowctrl + - const: nvidia,tegra124-flowctrl + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + flow-controller@60007000 { + compatible = "nvidia,tegra20-flowctrl"; + reg = <0x60007000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml b/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml new file mode 100644 index 0000000000..158186610c --- /dev/null +++ b/Documentation/devicetree/bindings/soc/ti/k3-ringacc.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/ti/k3-ringacc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments K3 NavigatorSS Ring Accelerator + +maintainers: + - Santosh Shilimkar <ssantosh@kernel.org> + - Grygorii Strashko <grygorii.strashko@ti.com> + +description: | + The Ring Accelerator (RA) is a machine which converts read/write accesses + from/to a constant address into corresponding read/write accesses from/to a + circular data structure in memory. The RA eliminates the need for each DMA + controller which needs to access ring elements from having to know the current + state of the ring (base address, current offset). The DMA controller + performs a read or write access to a specific address range (which maps to the + source interface on the RA) and the RA replaces the address for the transaction + with a new address which corresponds to the head or tail element of the ring + (head for reads, tail for writes). + + The Ring Accelerator is a hardware module that is responsible for accelerating + management of the packet queues. The K3 SoCs can have more than one RA instances + +allOf: + - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml# + +properties: + compatible: + items: + - const: ti,am654-navss-ringacc + + reg: + minItems: 4 + items: + - description: real time registers regions + - description: fifos registers regions + - description: proxy gcfg registers regions + - description: proxy target registers regions + - description: configuration registers region + + reg-names: + minItems: 4 + items: + - const: rt + - const: fifos + - const: proxy_gcfg + - const: proxy_target + - const: cfg + + msi-parent: true + + ti,num-rings: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Number of rings supported by RA + + ti,sci-rm-range-gp-rings: + $ref: /schemas/types.yaml#/definitions/uint32 + description: TI-SCI RM subtype for GP ring range + +required: + - compatible + - reg + - reg-names + - msi-parent + - ti,num-rings + - ti,sci-rm-range-gp-rings + - ti,sci + - ti,sci-dev-id + +unevaluatedProperties: false + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + + ringacc: ringacc@3c000000 { + compatible = "ti,am654-navss-ringacc"; + reg = <0x0 0x3c000000 0x0 0x400000>, + <0x0 0x38000000 0x0 0x400000>, + <0x0 0x31120000 0x0 0x100>, + <0x0 0x33000000 0x0 0x40000>, + <0x0 0x31080000 0x0 0x40000>; + reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg"; + ti,num-rings = <818>; + ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */ + ti,sci = <&dmsc>; + ti,sci-dev-id = <187>; + msi-parent = <&inta_main_udmass>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/ti/keystone-navigator-dma.txt b/Documentation/devicetree/bindings/soc/ti/keystone-navigator-dma.txt new file mode 100644 index 0000000000..337c4ea5c5 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/ti/keystone-navigator-dma.txt @@ -0,0 +1,111 @@ +Keystone Navigator DMA Controller + +This document explains the device tree bindings for the packet dma +on keystone devices. The Keystone Navigator DMA driver sets up the dma +channels and flows for the QMSS(Queue Manager SubSystem) who triggers +the actual data movements across clients using destination queues. Every +client modules like NETCP(Network Coprocessor), SRIO(Serial Rapid IO), +CRYPTO Engines etc has its own instance of dma hardware. QMSS has also +an internal packet DMA module which is used as an infrastructure DMA +with zero copy. + +Navigator DMA cloud layout: + ------------------ + | Navigator DMAs | + ------------------ + | + |-> DMA instance #0 + | + |-> DMA instance #1 + . + . + | + |-> DMA instance #n + +Navigator DMA properties: +Required properties: + - compatible: Should be "ti,keystone-navigator-dma" + - clocks: phandle to dma instances clocks. The clock handles can be as + many as the dma instances. The order should be maintained as per + the dma instances. + - ti,navigator-cloud-address: Should contain base address for the multi-core + navigator cloud and number of addresses depends on SOC integration + configuration.. Navigator cloud global address needs to be programmed + into DMA and the DMA uses it as the physical addresses to reach queue + managers. Note that these addresses though points to queue managers, + they are relevant only from DMA perspective. The QMSS may not choose to + use them since it has a different address space view to reach all + its components. + +DMA instance properties: +Required properties: + - reg: Should contain register location and length of the following dma + register regions. Register regions should be specified in the following + order. + - Global control register region (global). + - Tx DMA channel configuration register region (txchan). + - Rx DMA channel configuration register region (rxchan). + - Tx DMA channel Scheduler configuration register region (txsched). + - Rx DMA flow configuration register region (rxflow). + +Optional properties: + - reg-names: Names for the register regions. + - ti,enable-all: Enable all DMA channels vs clients opening specific channels + what they need. This property is useful for the userspace fast path + case where the linux drivers enables the channels used by userland + stack. + - ti,loop-back: To loopback Tx streaming I/F to Rx streaming I/F. Used for + infrastructure transfers. + - ti,rx-retry-timeout: Number of dma cycles to wait before retry on buffer + starvation. + +Example: + + knav_dmas: knav_dmas@0 { + compatible = "ti,keystone-navigator-dma"; + clocks = <&papllclk>, <&clkxge>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,navigator-cloud-address = <0x23a80000 0x23a90000 + 0x23aa0000 0x23ab0000>; + + dma_gbe: dma_gbe@0 { + reg = <0x2004000 0x100>, + <0x2004400 0x120>, + <0x2004800 0x300>, + <0x2004c00 0x120>, + <0x2005000 0x400>; + reg-names = "global", "txchan", "rxchan", + "txsched", "rxflow"; + }; + + dma_xgbe: dma_xgbe@0 { + reg = <0x2fa1000 0x100>, + <0x2fa1400 0x200>, + <0x2fa1800 0x200>, + <0x2fa1c00 0x200>, + <0x2fa2000 0x400>; + reg-names = "global", "txchan", "rxchan", + "txsched", "rxflow"; + }; + }; + +Navigator DMA client: +Required properties: + - ti,navigator-dmas: List of one or more DMA specifiers, each consisting of + - A phandle pointing to DMA instance node + - A DMA channel number as a phandle arg. + - ti,navigator-dma-names: Contains dma channel name for each DMA specifier in + the 'ti,navigator-dmas' property. + +Example: + + netcp: netcp@2090000 { + .. + ti,navigator-dmas = <&dma_gbe 22>, + <&dma_gbe 23>, + <&dma_gbe 8>; + ti,navigator-dma-names = "netrx0", "netrx1", "nettx"; + .. + }; diff --git a/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt b/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt new file mode 100644 index 0000000000..b025770eeb --- /dev/null +++ b/Documentation/devicetree/bindings/soc/ti/keystone-navigator-qmss.txt @@ -0,0 +1,238 @@ +* Texas Instruments Keystone Navigator Queue Management SubSystem driver + +The QMSS (Queue Manager Sub System) found on Keystone SOCs is one of +the main hardware sub system which forms the backbone of the Keystone +multi-core Navigator. QMSS consist of queue managers, packed-data structure +processors(PDSP), linking RAM, descriptor pools and infrastructure +Packet DMA. +The Queue Manager is a hardware module that is responsible for accelerating +management of the packet queues. Packets are queued/de-queued by writing or +reading descriptor address to a particular memory mapped location. The PDSPs +perform QMSS related functions like accumulation, QoS, or event management. +Linking RAM registers are used to link the descriptors which are stored in +descriptor RAM. Descriptor RAM is configurable as internal or external memory. +The QMSS driver manages the PDSP setups, linking RAM regions, +queue pool management (allocation, push, pop and notify) and descriptor +pool management. + + +Required properties: +- compatible : Must be "ti,keystone-navigator-qmss". + : Must be "ti,66ak2g-navss-qm" for QMSS on K2G SoC. +- clocks : phandle to the reference clock for this device. +- queue-range : <start number> total range of queue numbers for the device. +- linkram0 : <address size> for internal link ram, where size is the total + link ram entries. +- linkram1 : <address size> for external link ram, where size is the total + external link ram entries. If the address is specified as "0" + driver will allocate memory. +- qmgrs : child node describing the individual queue managers on the + SoC. On keystone 1 devices there should be only one node. + On keystone 2 devices there can be more than 1 node. + -- managed-queues : the actual queues managed by each queue manager + instance, specified as <"base queue #" "# of queues">. + -- reg : Address and size of the register set for the device. + Register regions should be specified in the following + order + - Queue Peek region. + - Queue status RAM. + - Queue configuration region. + - Descriptor memory setup region. + - Queue Management/Queue Proxy region for queue Push. + - Queue Management/Queue Proxy region for queue Pop. + +For QMSS on K2G SoC, following QM reg indexes are used in that order + - Queue Peek region. + - Queue configuration region. + - Queue Management/Queue Proxy region for queue Push/Pop. + +- queue-pools : child node classifying the queue ranges into pools. + Queue ranges are grouped into 3 type of pools: + - qpend : pool of qpend(interruptible) queues + - general-purpose : pool of general queues, primarily used + as free descriptor queues or the + transmit DMA queues. + - accumulator : pool of queues on PDSP accumulator channel + Each range can have the following properties: + -- qrange : number of queues to use per queue range, specified as + <"base queue #" "# of queues">. + -- interrupts : Optional property to specify the interrupt mapping + for interruptible queues. The driver additionally sets + the interrupt affinity hint based on the cpu mask. + -- qalloc-by-id : Optional property to specify that the queues in this + range can only be allocated by queue id. + -- accumulator : Accumulator channel specification. Any of the PDSPs in + QMSS can be loaded with the accumulator firmware. The + accumulator firmware’s job is to poll a select number of + queues looking for descriptors that have been pushed + into them. Descriptors are popped from the queue and + placed in a buffer provided by the host. When the list + becomes full or a programmed time period expires, the + accumulator triggers an interrupt to the host to read + the buffer for descriptor information. This firmware + comes in 16, 32, and 48 channel builds. Each of these + channels can be configured to monitor 32 contiguous + queues. Accumulator channel property is specified as: + <pdsp-id, channel, entries, pacing mode, latency> + pdsp-id : QMSS PDSP running accumulator firmware + on which the channel has to be + configured + channel : Accumulator channel number + entries : Size of the accumulator descriptor list + pacing mode : Interrupt pacing mode + 0 : None, i.e interrupt on list full only + 1 : Time delay since last interrupt + 2 : Time delay since first new packet + 3 : Time delay since last new packet + latency : time to delay the interrupt, specified + in microseconds. + -- multi-queue : Optional property to specify that the channel has to + monitor up to 32 queues starting at the base queue #. +- descriptor-regions : child node describing the memory regions for keystone + navigator packet DMA descriptors. The memory for + descriptors will be allocated by the driver. + -- id : region number in QMSS. + -- region-spec : specifies the number of descriptors in the + region, specified as + <"# of descriptors" "descriptor size">. + -- link-index : start index, i.e. index of the first + descriptor in the region. + +Optional properties: +- dma-coherent : Present if DMA operations are coherent. +- pdsps : child node describing the PDSP configuration. + -- firmware : firmware to be loaded on the PDSP. + -- id : the qmss pdsp that will run the firmware. + -- reg : Address and size of the register set for the PDSP. + Register regions should be specified in the following + order + - PDSP internal RAM region. + - PDSP control/status region registers. + - QMSS interrupt distributor registers. + - PDSP command interface region. + +Example: + +qmss: qmss@2a40000 { + compatible = "ti,keystone-qmss"; + dma-coherent; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&chipclk13>; + ranges; + queue-range = <0 0x4000>; + linkram0 = <0x100000 0x8000>; + linkram1 = <0x0 0x10000>; + + qmgrs { + #address-cells = <1>; + #size-cells = <1>; + ranges; + qmgr0 { + managed-queues = <0 0x2000>; + reg = <0x2a40000 0x20000>, + <0x2a06000 0x400>, + <0x2a02000 0x1000>, + <0x2a03000 0x1000>, + <0x23a80000 0x20000>, + <0x2a80000 0x20000>; + }; + + qmgr1 { + managed-queues = <0x2000 0x2000>; + reg = <0x2a60000 0x20000>, + <0x2a06400 0x400>, + <0x2a04000 0x1000>, + <0x2a05000 0x1000>, + <0x23aa0000 0x20000>, + <0x2aa0000 0x20000>; + }; + }; + queue-pools { + qpend { + qpend-0 { + qrange = <658 8>; + interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04 + 0 43 0xf04 0 44 0xf04 0 45 0xf04 + 0 46 0xf04 0 47 0xf04>; + }; + qpend-1 { + qrange = <8704 16>; + interrupts = <0 48 0xf04 0 49 0xf04 0 50 0xf04 + 0 51 0xf04 0 52 0xf04 0 53 0xf04 + 0 54 0xf04 0 55 0xf04 0 56 0xf04 + 0 57 0xf04 0 58 0xf04 0 59 0xf04 + 0 60 0xf04 0 61 0xf04 0 62 0xf04 + 0 63 0xf04>; + qalloc-by-id; + }; + qpend-2 { + qrange = <8720 16>; + interrupts = <0 64 0xf04 0 65 0xf04 0 66 0xf04 + 0 59 0xf04 0 68 0xf04 0 69 0xf04 + 0 70 0xf04 0 71 0xf04 0 72 0xf04 + 0 73 0xf04 0 74 0xf04 0 75 0xf04 + 0 76 0xf04 0 77 0xf04 0 78 0xf04 + 0 79 0xf04>; + }; + }; + general-purpose { + gp-0 { + qrange = <4000 64>; + }; + netcp-tx { + qrange = <640 9>; + qalloc-by-id; + }; + }; + accumulator { + acc-0 { + qrange = <128 32>; + accumulator = <0 36 16 2 50>; + interrupts = <0 215 0xf01>; + multi-queue; + qalloc-by-id; + }; + acc-1 { + qrange = <160 32>; + accumulator = <0 37 16 2 50>; + interrupts = <0 216 0xf01>; + multi-queue; + }; + acc-2 { + qrange = <192 32>; + accumulator = <0 38 16 2 50>; + interrupts = <0 217 0xf01>; + multi-queue; + }; + acc-3 { + qrange = <224 32>; + accumulator = <0 39 16 2 50>; + interrupts = <0 218 0xf01>; + multi-queue; + }; + }; + }; + descriptor-regions { + #address-cells = <1>; + #size-cells = <1>; + ranges; + region-12 { + id = <12>; + region-spec = <8192 128>; /* num_desc desc_size */ + link-index = <0x4000>; + }; + }; + pdsps { + #address-cells = <1>; + #size-cells = <1>; + ranges; + pdsp0@2a10000 { + reg = <0x2a10000 0x1000>, + <0x2a0f000 0x100>, + <0x2a0c000 0x3c8>, + <0x2a20000 0x4000>; + id = <0>; + }; + }; +}; /* qmss */ diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml new file mode 100644 index 0000000000..a750035d62 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/ti/sci-pm-domain.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI-SCI generic power domain + +maintainers: + - Nishanth Menon <nm@ti.com> + +allOf: + - $ref: /schemas/power/power-domain.yaml# + +description: | + Some TI SoCs contain a system controller (like the Power Management Micro + Controller (PMMC) on Keystone 66AK2G SoC) that are responsible for controlling + the state of the various hardware modules present on the SoC. Communication + between the host processor running an OS and the system controller happens + through a protocol called TI System Control Interface (TI-SCI protocol). + + This PM domain node represents the global PM domain managed by the TI-SCI + controller. Since this relies on the TI SCI protocol to communicate with + the TI-SCI controller, it must be a child of the TI-SCI controller node. + +properties: + compatible: + const: ti,sci-pm-domain + + "#power-domain-cells": + enum: [1, 2] + description: + The two cells represent values that the TI-SCI controller defines. + + The first cell should contain the device ID. + + The second cell, if cell-value is 2, should be one of the following + TI_SCI_PD_EXCLUSIVE - Allows the device to be exclusively controlled + or + TI_SCI_PD_SHARED - Allows the device to be shared by multiple hosts. + Please refer to dt-bindings/soc/ti,sci_pm_domain.h for the definitions. + + Please see http://processors.wiki.ti.com/index.php/TISCI for + protocol documentation for the values to be used for different devices. + +additionalProperties: false + +examples: + - | + k2g_pds: power-controller { + compatible = "ti,sci-pm-domain"; + #power-domain-cells = <1>; + }; + + - | + k3_pds: power-controller { + compatible = "ti,sci-pm-domain"; + #power-domain-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml new file mode 100644 index 0000000000..c402cb2928 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml @@ -0,0 +1,521 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/ti/ti,pruss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: |+ + TI Programmable Real-Time Unit and Industrial Communication Subsystem + +maintainers: + - Suman Anna <s-anna@ti.com> + +description: |+ + + The Programmable Real-Time Unit and Industrial Communication Subsystem + (PRU-ICSS a.k.a. PRUSS) is present on various TI SoCs such as AM335x, AM437x, + Keystone 66AK2G, OMAP-L138/DA850 etc. A PRUSS consists of dual 32-bit RISC + cores (Programmable Real-Time Units, or PRUs), shared RAM, data and + instruction RAMs, some internal peripheral modules to facilitate industrial + communication, and an interrupt controller. + + The programmable nature of the PRUs provide flexibility to implement custom + peripheral interfaces, fast real-time responses, or specialized data handling. + The common peripheral modules include the following, + - an Ethernet MII_RT module with two MII ports + - an MDIO port to control external Ethernet PHYs + - an Industrial Ethernet Peripheral (IEP) to manage/generate Industrial + Ethernet functions + - an Enhanced Capture Module (eCAP) + - an Industrial Ethernet Timer with 7/9 capture and 16 compare events + - a 16550-compatible UART to support PROFIBUS + - Enhanced GPIO with async capture and serial support + + A PRU-ICSS subsystem can have up to three shared data memories. A PRU core + acts on a primary Data RAM (there are usually 2 Data RAMs) at its address + 0x0, but also has access to a secondary Data RAM (primary to the other PRU + core) at its address 0x2000. A shared Data RAM, if present, can be accessed + by both the PRU cores. The Interrupt Controller (INTC) and a CFG module are + common to both the PRU cores. Each PRU core also has a private instruction + RAM, and specific register spaces for Control and Debug functionalities. + + Various sub-modules within a PRU-ICSS subsystem are represented as individual + nodes and are defined using a parent-child hierarchy depending on their + integration within the IP and the SoC. These nodes are described in the + following sections. + + + PRU-ICSS Node + ============== + Each PRU-ICSS instance is represented as its own node with the individual PRU + processor cores, the memories node, an INTC node and an MDIO node represented + as child nodes within this PRUSS node. This node shall be a child of the + corresponding interconnect bus nodes or target-module nodes. + + See ../../mfd/syscon.yaml for generic SysCon binding details. + + +properties: + $nodename: + pattern: "^(pruss|icssg)@[0-9a-f]+$" + + compatible: + enum: + - ti,am3356-pruss # for AM335x SoC family + - ti,am4376-pruss0 # for AM437x SoC family and PRUSS unit 0 + - ti,am4376-pruss1 # for AM437x SoC family and PRUSS unit 1 + - ti,am5728-pruss # for AM57xx SoC family + - ti,am625-pruss # for K3 AM62x SoC family + - ti,am642-icssg # for K3 AM64x SoC family + - ti,am654-icssg # for K3 AM65x SoC family + - ti,j721e-icssg # for K3 J721E SoC family + - ti,k2g-pruss # for 66AK2G SoC family + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: + maxItems: 1 + + dma-ranges: + maxItems: 1 + + dma-coherent: true + + power-domains: + description: | + This property is as per sci-pm-domain.txt. + +patternProperties: + + memories@[a-f0-9]+$: + description: | + The various Data RAMs within a single PRU-ICSS unit are represented as a + single node with the name 'memories'. + + type: object + + properties: + reg: + minItems: 2 # On AM437x one of two PRUSS units don't contain Shared RAM. + items: + - description: Address and size of the Data RAM0. + - description: Address and size of the Data RAM1. + - description: | + Address and size of the Shared Data RAM. Note that on AM437x one + of two PRUSS units don't contain Shared RAM, while the second one + has it. + + reg-names: + minItems: 2 + items: + - const: dram0 + - const: dram1 + - const: shrdram2 + + required: + - reg + - reg-names + + additionalProperties: false + + cfg@[a-f0-9]+$: + description: | + PRU-ICSS configuration space. CFG sub-module represented as a SysCon. + + type: object + additionalProperties: false + + properties: + compatible: + items: + - const: ti,pruss-cfg + - const: syscon + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + reg: + maxItems: 1 + + ranges: + maxItems: 1 + + clocks: + type: object + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + coreclk-mux@[a-f0-9]+$: + description: | + This is applicable only for ICSSG (K3 SoCs). The ICSSG modules + core clock can be set to one of the 2 sources: ICSSG_CORE_CLK or + ICSSG_ICLK. This node models this clock mux and should have the + name "coreclk-mux". + + type: object + + properties: + '#clock-cells': + const: 0 + + clocks: + items: + - description: ICSSG_CORE Clock + - description: ICSSG_ICLK Clock + + assigned-clocks: + maxItems: 1 + + assigned-clock-parents: + maxItems: 1 + description: | + Standard assigned-clocks-parents definition used for selecting + mux parent (one of the mux input). + + reg: + maxItems: 1 + + required: + - clocks + + additionalProperties: false + + iepclk-mux@[a-f0-9]+$: + description: | + The IEP module can get its clock from 2 sources: ICSSG_IEP_CLK or + CORE_CLK (OCP_CLK in older SoCs). This node models this clock + mux and should have the name "iepclk-mux". + + type: object + + properties: + '#clock-cells': + const: 0 + + clocks: + items: + - description: ICSSG_IEP Clock + - description: Core Clock (OCP Clock in older SoCs) + + assigned-clocks: + maxItems: 1 + + assigned-clock-parents: + maxItems: 1 + description: | + Standard assigned-clocks-parents definition used for selecting + mux parent (one of the mux input). + + reg: + maxItems: 1 + + required: + - clocks + + additionalProperties: false + + additionalProperties: false + + iep@[a-f0-9]+$: + description: | + Industrial Ethernet Peripheral to manage/generate Industrial Ethernet + functions such as time stamping. Each PRUSS has either 1 IEP (on AM335x, + AM437x, AM57xx & 66AK2G SoCs) or 2 IEPs (on K3 AM65x, J721E & AM64x SoCs). + IEP is used for creating PTP clocks and generating PPS signals. + + type: object + + mii-rt@[a-f0-9]+$: + description: | + Real-Time Ethernet to support multiple industrial communication protocols. + MII-RT sub-module represented as a SysCon. + + type: object + + properties: + compatible: + items: + - const: ti,pruss-mii + - const: syscon + + reg: + maxItems: 1 + + additionalProperties: false + + mii-g-rt@[a-f0-9]+$: + description: | + The Real-time Media Independent Interface to support multiple industrial + communication protocols (G stands for Gigabit). MII-G-RT sub-module + represented as a SysCon. + + type: object + + properties: + compatible: + items: + - const: ti,pruss-mii-g + - const: syscon + + reg: + maxItems: 1 + + additionalProperties: false + + interrupt-controller@[a-f0-9]+$: + description: | + PRUSS INTC Node. Each PRUSS has a single interrupt controller instance + that is common to all the PRU cores. This should be represented as an + interrupt-controller node. + $ref: /schemas/interrupt-controller/ti,pruss-intc.yaml# + type: object + + mdio@[a-f0-9]+$: + description: | + MDIO Node. Each PRUSS has an MDIO module that can be used to control + external PHYs. The MDIO module used within the PRU-ICSS is an instance of + the MDIO Controller used in TI Davinci SoCs. + $ref: /schemas/net/ti,davinci-mdio.yaml# + type: object + + "^(pru|rtu|txpru)@[0-9a-f]+$": + description: | + PRU Node. Each PRUSS has dual PRU cores, each represented as a RemoteProc + device through a PRU child node each. Each node can optionally be rendered + inactive by using the standard DT string property, "status". The ICSSG IP + present on K3 SoCs have additional auxiliary PRU cores with slightly + different IP integration. + $ref: /schemas/remoteproc/ti,pru-rproc.yaml# + type: object + +required: + - compatible + - reg + - ranges + +additionalProperties: false + +# Due to inability of correctly verifying sub-nodes with an @address through +# the "required" list, the required sub-nodes below are commented out for now. + +# required: +# - memories +# - interrupt-controller +# - pru + +allOf: + - if: + properties: + compatible: + contains: + enum: + - ti,k2g-pruss + - ti,am654-icssg + - ti,j721e-icssg + - ti,am642-icssg + then: + required: + - power-domains + + - if: + properties: + compatible: + contains: + enum: + - ti,k2g-pruss + then: + required: + - dma-coherent + +examples: + - | + + /* Example 1 AM33xx PRU-ICSS */ + pruss: pruss@0 { + compatible = "ti,am3356-pruss"; + reg = <0x0 0x80000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pruss_mem: memories@0 { + reg = <0x0 0x2000>, + <0x2000 0x2000>, + <0x10000 0x3000>; + reg-names = "dram0", "dram1", "shrdram2"; + }; + + pruss_cfg: cfg@26000 { + compatible = "ti,pruss-cfg", "syscon"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x26000 0x2000>; + ranges = <0x00 0x26000 0x2000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + pruss_iepclk_mux: iepclk-mux@30 { + reg = <0x30>; + #clock-cells = <0>; + clocks = <&l3_gclk>, /* icss_iep */ + <&pruss_ocp_gclk>; /* icss_ocp */ + }; + }; + }; + + pruss_mii_rt: mii-rt@32000 { + compatible = "ti,pruss-mii", "syscon"; + reg = <0x32000 0x58>; + }; + + pruss_intc: interrupt-controller@20000 { + compatible = "ti,pruss-intc"; + reg = <0x20000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <20 21 22 23 24 25 26 27>; + interrupt-names = "host_intr0", "host_intr1", + "host_intr2", "host_intr3", + "host_intr4", "host_intr5", + "host_intr6", "host_intr7"; + }; + + pru0: pru@34000 { + compatible = "ti,am3356-pru"; + reg = <0x34000 0x2000>, + <0x22000 0x400>, + <0x22400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am335x-pru0-fw"; + }; + + pru1: pru@38000 { + compatible = "ti,am3356-pru"; + reg = <0x38000 0x2000>, + <0x24000 0x400>, + <0x24400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am335x-pru1-fw"; + }; + + pruss_mdio: mdio@32400 { + compatible = "ti,davinci_mdio"; + reg = <0x32400 0x90>; + clocks = <&dpll_core_m4_ck>; + clock-names = "fck"; + bus_freq = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + - | + + /* Example 2 AM43xx PRU-ICSS with PRUSS1 node */ + #include <dt-bindings/interrupt-controller/arm-gic.h> + pruss1: pruss@0 { + compatible = "ti,am4376-pruss1"; + reg = <0x0 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pruss1_mem: memories@0 { + reg = <0x0 0x2000>, + <0x2000 0x2000>, + <0x10000 0x8000>; + reg-names = "dram0", "dram1", "shrdram2"; + }; + + pruss1_cfg: cfg@26000 { + compatible = "ti,pruss-cfg", "syscon"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x26000 0x2000>; + ranges = <0x00 0x26000 0x2000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + pruss1_iepclk_mux: iepclk-mux@30 { + reg = <0x30>; + #clock-cells = <0>; + clocks = <&sysclk_div>, /* icss_iep */ + <&pruss_ocp_gclk>; /* icss_ocp */ + }; + }; + }; + + pruss1_mii_rt: mii-rt@32000 { + compatible = "ti,pruss-mii", "syscon"; + reg = <0x32000 0x58>; + }; + + pruss1_intc: interrupt-controller@20000 { + compatible = "ti,pruss-intc"; + reg = <0x20000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host_intr0", "host_intr1", + "host_intr2", "host_intr3", + "host_intr4", + "host_intr6", "host_intr7"; + ti,irqs-reserved = /bits/ 8 <0x20>; /* BIT(5) */ + }; + + pru1_0: pru@34000 { + compatible = "ti,am4376-pru"; + reg = <0x34000 0x3000>, + <0x22000 0x400>, + <0x22400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am437x-pru1_0-fw"; + }; + + pru1_1: pru@38000 { + compatible = "ti,am4376-pru"; + reg = <0x38000 0x3000>, + <0x24000 0x400>, + <0x24400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am437x-pru1_1-fw"; + }; + + pruss1_mdio: mdio@32400 { + compatible = "ti,davinci_mdio"; + reg = <0x32400 0x90>; + clocks = <&dpll_core_m4_ck>; + clock-names = "fck"; + bus_freq = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml b/Documentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml new file mode 100644 index 0000000000..0df41c4f60 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml @@ -0,0 +1,175 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/ti/wkup-m3-ipc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Wakeup M3 IPC device + +maintainers: + - Dave Gerlach <d-gerlach@ti.com> + - Drew Fustini <dfustini@baylibre.com> + +description: |+ + The TI AM33xx and AM43xx family of devices use a small Cortex M3 co-processor + (commonly referred to as Wakeup M3 or CM3) to help with various low power tasks + that cannot be controlled from the MPU, like suspend/resume and certain deep + C-states for CPU Idle. Once the wkup_m3_ipc driver uses the wkup_m3_rproc driver + to boot the wkup_m3, it handles communication with the CM3 using IPC registers + present in the SoC's control module and a mailbox. The wkup_m3_ipc exposes an + API to allow the SoC PM code to execute specific PM tasks. + + Wkup M3 Device Node + ==================== + A wkup_m3_ipc device node is used to represent the IPC registers within an + SoC. + + Support for VTT Toggle with GPIO pin + ==================================== + On some boards like the AM335x EVM-SK and the AM437x GP EVM, a GPIO pin is + connected to the enable pin on the DDR VTT regulator. This allows the + regulator to be disabled upon suspend and enabled upon resume. Please note + that the GPIO pin must be part of the GPIO0 module as only this GPIO module + is in the wakeup power domain. + + Support for IO Isolation + ======================== + On AM437x SoCs, certain pins can be forced into an alternate state when IO + isolation is activated. Those pins have pad control registers prefixed by + 'CTRL_CONF_' that contain DS0 (e.g. deep sleep) configuration bits that can + override the pin's existing bias (pull-up/pull-down) and value (high/low) when + IO isolation is active. + + Support for I2C PMIC Voltage Scaling + ==================================== + It is possible to pass the name of a binary file to load into the CM3 memory. + The binary data is the I2C sequences for the CM3 to send out to the PMIC + during low power mode entry. + +properties: + compatible: + enum: + - ti,am3352-wkup-m3-ipc # for AM33xx SoCs + - ti,am4372-wkup-m3-ipc # for AM43xx SoCs + + reg: + description: + The IPC register address space to communicate with the Wakeup M3 processor + maxItems: 1 + + interrupts: + description: wkup_m3 interrupt that signals the MPU + maxItems: 1 + + ti,rproc: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the wkup_m3 rproc node so the IPC driver can boot it + + mboxes: + description: + phandles used by IPC framework to get correct mbox + channel for communication. Must point to appropriate + mbox_wkupm3 child node. + maxItems: 1 + + firmware-name: + description: + Name of binary file with I2C sequences for PMIC voltage scaling + + ti,vtt-gpio-pin: + $ref: /schemas/types.yaml#/definitions/uint32 + description: GPIO pin connected to enable pin on VTT regulator + + ti,set-io-isolation: + type: boolean + description: + If this property is present, then the wkup_m3_ipc driver will instruct + the CM3 firmware to activate IO isolation when suspending to deep sleep. + This can be leveraged by a board design to put other devices on the board + into a low power state. + +allOf: + - if: + properties: + compatible: + not: + contains: + const: ti,am4372-wkup-m3-ipc + then: + properties: + ti,set-io-isolation: false + +required: + - compatible + - reg + - interrupts + - ti,rproc + - mboxes + +additionalProperties: false + +examples: + - | + /* Example for AM335x SoC */ + soc { + #address-cells = <1>; + #size-cells = <1>; + + am335x_mailbox: mailbox { + #mbox-cells = <1>; + }; + + wkup_m3_ipc@1324 { + compatible = "ti,am3352-wkup-m3-ipc"; + reg = <0x1324 0x24>; + interrupts = <78>; + ti,rproc = <&wkup_m3>; + mboxes = <&am335x_mailbox &mbox_wkupm3>; + ti,vtt-gpio-pin = <7>; + firmware-name = "am335x-evm-scale-data.bin"; + }; + }; + + - | + /* + * Example for AM473x SoC: + * On the AM437x-GP-EVM board, gpio5_7 is wired to enable pin of the DDR VTT + * regulator. The 'ddr_vtt_toggle_default' pinmux node configures gpio5_7 + * for pull-up during normal system operation. However, the DS0 (deep sleep) + * state of the pin is configured for pull-down and thus the VTT regulator + * will be disabled to save power when IO isolation is active. Note that + * this method is an alternative to using the 'ti,vtt-gpio-pin' property. + */ + #include <dt-bindings/pinctrl/am43xx.h> + soc { + #address-cells = <1>; + #size-cells = <1>; + + am437x_mailbox: mailbox { + #mbox-cells = <1>; + }; + + am43xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&ddr3_vtt_toggle_default>; + + ddr3_vtt_toggle_default: ddr_vtt_toggle_default { + pinctrl-single,pins = < + 0x25C (DS0_PULL_UP_DOWN_EN | PIN_OUTPUT_PULLUP | DS0_FORCE_OFF_MODE | MUX_MODE7) + >; + }; + }; + + wkup_m3_ipc@1324 { + compatible = "ti,am4372-wkup-m3-ipc"; + reg = <0x1324 0x24>; + interrupts = <78>; + ti,rproc = <&wkup_m3>; + mboxes = <&am437x_mailbox &mbox_wkupm3>; + ti,set-io-isolation; + firmware-name = "am43x-evm-scale-data.bin"; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu-settings.yaml b/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu-settings.yaml new file mode 100644 index 0000000000..cb245f4002 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu-settings.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/xilinx/xlnx,vcu-settings.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx VCU Settings + +maintainers: + - Michael Tretter <kernel@pengutronix.de> + +description: | + The Xilinx VCU Settings provides information about the configuration of the + video codec unit. + +properties: + compatible: + items: + - const: xlnx,vcu-settings + - const: syscon + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + fpga { + #address-cells = <2>; + #size-cells = <2>; + + xlnx_vcu: vcu@a0041000 { + compatible = "xlnx,vcu-settings", "syscon"; + reg = <0x0 0xa0041000 0x0 0x1000>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu.txt b/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu.txt new file mode 100644 index 0000000000..2417b13ba4 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/xilinx/xlnx,vcu.txt @@ -0,0 +1,26 @@ +LogicoreIP designed compatible with Xilinx ZYNQ family. +------------------------------------------------------- + +General concept +--------------- + +LogicoreIP design to provide the isolation between processing system +and programmable logic. Also provides the list of register set to configure +the frequency. + +Required properties: +- compatible: shall be one of: + "xlnx,vcu" + "xlnx,vcu-logicoreip-1.0" +- reg : The base offset and size of the VCU_PL_SLCR register space. +- clocks: phandle for aclk and pll_ref clocksource +- clock-names: The identification string, "aclk", is always required for + the axi clock. "pll_ref" is required for pll. +Example: + + xlnx_vcu: vcu@a0040000 { + compatible = "xlnx,vcu-logicoreip-1.0"; + reg = <0x0 0xa0040000 0x0 0x1000>; + clocks = <&si570_1>, <&clkc 71>; + clock-names = "pll_ref", "aclk"; + }; |