1 files changed, 0 insertions, 50 deletions
diff --git a/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt b/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt
deleted file mode 100644
index 3ffc2562fb..0000000000
--- a/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-Texas Instruments DaVinci McBSP module
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-This binding describes the "Multi-channel Buffered Serial Port" (McBSP)
-audio interface found in some TI DaVinci processors like the OMAP-L138 or AM180x.
-
-
-Required properties:
-~~~~~~~~~~~~~~~~~~~~
-- compatible :
-        "ti,da850-mcbsp" : for DA850, AM180x and OPAM-L138 platforms
-
-- reg : physical base address and length of the controller memory mapped
-        region(s).
-- reg-names : Should contain:
-        * "mpu" for the main registers (required).
-        * "dat" for the data FIFO (optional).
-
-- dmas: three element list of DMA controller phandles, DMA request line and
-	TC channel ordered triplets.
-- dma-names: identifier string for each DMA request line in the dmas property.
-	These strings correspond 1:1 with the ordered pairs in dmas. The dma
-	identifiers must be "rx" and "tx".
-
-Optional properties:
-~~~~~~~~~~~~~~~~~~~~
-- interrupts : Interrupt numbers for McBSP
-- interrupt-names : Known interrupt names are "rx" and "tx"
-
-- pinctrl-0: Should specify pin control group used for this controller.
-- pinctrl-names: Should contain only one value - "default", for more details
-        please refer to pinctrl-bindings.txt
-
-Example (AM1808):
-~~~~~~~~~~~~~~~~~
-
-mcbsp0: mcbsp@1d10000 {
-	compatible = "ti,da850-mcbsp";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcbsp0_pins>;
-
-	reg = 	<0x00110000 0x1000>,
-		<0x00310000 0x1000>;
-	reg-names = "mpu", "dat";
-	interrupts = <97 98>;
-	interrupt-names = "rx", "tx";
-	dmas = <&edma0 3 1
-		&edma0 2 1>;
-	dma-names = "tx", "rx";
-};