diff options
Diffstat (limited to '')
4 files changed, 356 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml b/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml new file mode 100644 index 0000000000..f882903769 --- /dev/null +++ b/Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spmi/hisilicon,hisi-spmi-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HiSilicon SPMI controller + +maintainers: + - Mauro Carvalho Chehab <mchehab+huawei@kernel.org> + +description: | + The HiSilicon SPMI BUS controller is found on some Kirin-based designs. + It is a MIPI System Power Management (SPMI) controller. + + The PMIC part is provided by + ./Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml. + +allOf: + - $ref: spmi.yaml# + +properties: + + $nodename: + pattern: "spmi@[0-9a-f]" + + compatible: + const: hisilicon,kirin970-spmi-controller + + reg: + maxItems: 1 + + hisilicon,spmi-channel: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + number of the Kirin 970 SPMI channel where the SPMI devices are connected. + +required: + - compatible + - reg + - hisilicon,spmi-channel + +patternProperties: + "@[0-9a-f]$": + type: object + + description: | + PMIC properties, which are specific to the used SPMI PMIC device(s). + When used in combination with HiSilicon 6421v600, the properties + are documented at + drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml. + +unevaluatedProperties: false + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + + spmi: spmi@fff24000 { + compatible = "hisilicon,kirin970-spmi-controller"; + #address-cells = <2>; + #size-cells = <0>; + reg = <0x0 0xfff24000 0x0 0x1000>; + hisilicon,spmi-channel = <2>; + + pmic@0 { + reg = <0 0>; + /* pmic properties */ + }; + }; + }; diff --git a/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml b/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml new file mode 100644 index 0000000000..ac99883a3f --- /dev/null +++ b/Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spmi/mtk,spmi-mtk-pmif.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek SPMI Controller + +maintainers: + - Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> + +description: |+ + On MediaTek SoCs the PMIC is connected via SPMI and the controller allows + for multiple SoCs to control a single SPMI master. + +allOf: + - $ref: spmi.yaml + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt6873-spmi + - mediatek,mt8195-spmi + - items: + - enum: + - mediatek,mt8186-spmi + - const: mediatek,mt8195-spmi + + reg: + maxItems: 2 + + reg-names: + items: + - const: pmif + - const: spmimst + + clocks: + minItems: 3 + maxItems: 3 + + clock-names: + items: + - const: pmif_sys_ck + - const: pmif_tmr_ck + - const: spmimst_clk_mux + + assigned-clocks: + maxItems: 1 + + assigned-clock-parents: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8192-clk.h> + + spmi: spmi@10027000 { + compatible = "mediatek,mt6873-spmi"; + reg = <0x10027000 0xe00>, + <0x10029000 0x100>; + reg-names = "pmif", "spmimst"; + clocks = <&infracfg CLK_INFRA_PMIC_AP>, + <&infracfg CLK_INFRA_PMIC_TMR>, + <&topckgen CLK_TOP_SPMI_MST_SEL>; + clock-names = "pmif_sys_ck", + "pmif_tmr_ck", + "spmimst_clk_mux"; + assigned-clocks = <&topckgen CLK_TOP_PWRAP_ULPOSC_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_OSC_D10>; + }; +... diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml new file mode 100644 index 0000000000..f983b4af6d --- /dev/null +++ b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spmi/qcom,spmi-pmic-arb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SPMI Controller (PMIC Arbiter) + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + +description: | + The SPMI PMIC Arbiter is found on Snapdragon chipsets. It is an SPMI + controller with wrapping arbitration logic to allow for multiple on-chip + devices to control a single SPMI master. + + The PMIC Arbiter can also act as an interrupt controller, providing interrupts + to slave devices. + +allOf: + - $ref: spmi.yaml + +properties: + compatible: + const: qcom,spmi-pmic-arb + + reg: + oneOf: + - items: # V1 + - description: core registers + - description: interrupt controller registers + - description: configuration registers + - items: # V2 + - description: core registers + - description: tx-channel per virtual slave regosters + - description: rx-channel (called observer) per virtual slave registers + - description: interrupt controller registers + - description: configuration registers + + reg-names: + oneOf: + - items: + - const: core + - const: intr + - const: cnfg + - items: + - const: core + - const: chnls + - const: obsrvr + - const: intr + - const: cnfg + + interrupts: + maxItems: 1 + + interrupt-names: + const: periph_irq + + interrupt-controller: true + + '#address-cells': true + + '#interrupt-cells': + const: 4 + description: | + cell 1: slave ID for the requested interrupt (0-15) + cell 2: peripheral ID for requested interrupt (0-255) + cell 3: the requested peripheral interrupt (0-7) + cell 4: interrupt flags indicating level-sense information, + as defined in dt-bindings/interrupt-controller/irq.h + + '#size-cells': true + + qcom,ee: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 5 + description: > + indicates the active Execution Environment identifier + + qcom,channel: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 5 + description: > + which of the PMIC Arb provided channels to use for accesses + + qcom,bus-id: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 1 + description: > + SPMI bus instance. only applicable to PMIC arbiter version 7 and beyond. + Supported values, 0 = primary bus, 1 = secondary bus + +required: + - compatible + - reg-names + - qcom,ee + - qcom,channel + +unevaluatedProperties: false + +examples: + - | + spmi@fc4cf000 { + compatible = "qcom,spmi-pmic-arb"; + reg-names = "core", "intr", "cnfg"; + reg = <0xfc4cf000 0x1000>, + <0xfc4cb000 0x1000>, + <0xfc4ca000 0x1000>; + + interrupt-names = "periph_irq"; + interrupts = <0 190 0>; + + qcom,ee = <0>; + qcom,channel = <0>; + + #address-cells = <2>; + #size-cells = <0>; + + interrupt-controller; + #interrupt-cells = <4>; + + qcom,bus-id = <0>; + }; + diff --git a/Documentation/devicetree/bindings/spmi/spmi.yaml b/Documentation/devicetree/bindings/spmi/spmi.yaml new file mode 100644 index 0000000000..c1b06fa5c6 --- /dev/null +++ b/Documentation/devicetree/bindings/spmi/spmi.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spmi/spmi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: System Power Management Interface (SPMI) Controller + +maintainers: + - Stephen Boyd <sboyd@kernel.org> + +description: | + The System Power Management (SPMI) controller is a 2-wire bus defined + by the MIPI Alliance for power management control to be used on SoC designs. + + SPMI controllers are modelled in device tree using a generic set of + bindings defined here, plus any bus controller specific properties, if + needed. + + Each SPMI controller has zero or more child nodes (up to 16 ones), each + one representing an unique slave at the bus. + +properties: + $nodename: + pattern: "^spmi@.*" + + "#address-cells": + const: 2 + + "#size-cells": + const: 0 + +patternProperties: + "@[0-9a-f]$": + description: up to 16 child PMIC nodes + type: object + + properties: + reg: + items: + - minItems: 1 + items: + - minimum: 0 + maximum: 0xf + - enum: [ 0 ] + description: + 0 means user ID address. 1 is reserved for group ID + address. + + required: + - reg + +required: + - reg + +additionalProperties: true + +examples: + - | + #include <dt-bindings/spmi/spmi.h> + + spmi@0 { + reg = <0 0>; + + #address-cells = <2>; + #size-cells = <0>; + + child@0 { + reg = <0 SPMI_USID>; + }; + + child@7 { + reg = <7 SPMI_USID>; + }; + }; |