diff options
Diffstat (limited to '')
8 files changed, 146 insertions, 63 deletions
diff --git a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml index fbd4212285..9b2272a9ec 100644 --- a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml +++ b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml @@ -16,6 +16,7 @@ properties: - allwinner,sun8i-a83t-ths - allwinner,sun8i-h3-ths - allwinner,sun8i-r40-ths + - allwinner,sun20i-d1-ths - allwinner,sun50i-a64-ths - allwinner,sun50i-a100-ths - allwinner,sun50i-h5-ths @@ -61,6 +62,7 @@ allOf: compatible: contains: enum: + - allwinner,sun20i-d1-ths - allwinner,sun50i-a100-ths - allwinner,sun50i-h6-ths @@ -84,7 +86,9 @@ allOf: properties: compatible: contains: - const: allwinner,sun8i-h3-ths + enum: + - allwinner,sun8i-h3-ths + - allwinner,sun20i-d1-ths then: properties: @@ -103,6 +107,7 @@ allOf: enum: - allwinner,sun8i-h3-ths - allwinner,sun8i-r40-ths + - allwinner,sun20i-d1-ths - allwinner,sun50i-a64-ths - allwinner,sun50i-a100-ths - allwinner,sun50i-h5-ths diff --git a/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml b/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml index 7538469997..b634f57cd0 100644 --- a/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml @@ -10,6 +10,9 @@ maintainers: - zhanghongchen <zhanghongchen@loongson.cn> - Yinbo Zhu <zhuyinbo@loongson.cn> +allOf: + - $ref: /schemas/thermal/thermal-sensor.yaml# + properties: compatible: oneOf: @@ -26,12 +29,16 @@ properties: interrupts: maxItems: 1 + '#thermal-sensor-cells': + const: 1 + required: - compatible - reg - interrupts + - '#thermal-sensor-cells' -additionalProperties: false +unevaluatedProperties: false examples: - | @@ -41,4 +48,5 @@ examples: reg = <0x1fe01500 0x30>; interrupt-parent = <&liointc0>; interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + #thermal-sensor-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/thermal/mediatek,thermal.yaml b/Documentation/devicetree/bindings/thermal/mediatek,thermal.yaml new file mode 100644 index 0000000000..d96a2e32bd --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/mediatek,thermal.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/mediatek,thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek thermal controller for on-SoC temperatures + +maintainers: + - Sascha Hauer <s.hauer@pengutronix.de> + +description: + This device does not have its own ADC, instead it directly controls the AUXADC + via AHB bus accesses. For this reason it needs phandles to the AUXADC. Also it + controls a mux in the apmixedsys register space via AHB bus accesses, so a + phandle to the APMIXEDSYS is also needed. + +allOf: + - $ref: thermal-sensor.yaml# + +properties: + compatible: + enum: + - mediatek,mt2701-thermal + - mediatek,mt2712-thermal + - mediatek,mt7622-thermal + - mediatek,mt7981-thermal + - mediatek,mt7986-thermal + - mediatek,mt8173-thermal + - mediatek,mt8183-thermal + - mediatek,mt8365-thermal + - mediatek,mt8516-thermal + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Main clock needed for register access + - description: The AUXADC clock + + clock-names: + items: + - const: therm + - const: auxadc + + mediatek,auxadc: + $ref: /schemas/types.yaml#/definitions/phandle + description: A phandle to the AUXADC which the thermal controller uses + + mediatek,apmixedsys: + $ref: /schemas/types.yaml#/definitions/phandle + description: A phandle to the APMIXEDSYS controller + + resets: + description: Reset controller controlling the thermal controller + + nvmem-cells: + items: + - description: + NVMEM cell with EEPROMA phandle to the calibration data provided by an + NVMEM device. If unspecified default values shall be used. + + nvmem-cell-names: + items: + - const: calibration-data + +required: + - reg + - interrupts + - clocks + - clock-names + - mediatek,auxadc + - mediatek,apmixedsys + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/reset/mt8173-resets.h> + + thermal@1100b000 { + compatible = "mediatek,mt8173-thermal"; + reg = <0x1100b000 0x1000>; + interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>; + clock-names = "therm", "auxadc"; + resets = <&pericfg MT8173_PERI_THERM_SW_RST>; + mediatek,auxadc = <&auxadc>; + mediatek,apmixedsys = <&apmixedsys>; + nvmem-cells = <&thermal_calibration_data>; + nvmem-cell-names = "calibration-data"; + #thermal-sensor-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt deleted file mode 100644 index ac39c7156f..0000000000 --- a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt +++ /dev/null @@ -1,52 +0,0 @@ -* Mediatek Thermal - -This describes the device tree binding for the Mediatek thermal controller -which measures the on-SoC temperatures. This device does not have its own ADC, -instead it directly controls the AUXADC via AHB bus accesses. For this reason -this device needs phandles to the AUXADC. Also it controls a mux in the -apmixedsys register space via AHB bus accesses, so a phandle to the APMIXEDSYS -is also needed. - -Required properties: -- compatible: - - "mediatek,mt8173-thermal" : For MT8173 family of SoCs - - "mediatek,mt2701-thermal" : For MT2701 family of SoCs - - "mediatek,mt2712-thermal" : For MT2712 family of SoCs - - "mediatek,mt7622-thermal" : For MT7622 SoC - - "mediatek,mt7981-thermal", "mediatek,mt7986-thermal" : For MT7981 SoC - - "mediatek,mt7986-thermal" : For MT7986 SoC - - "mediatek,mt8183-thermal" : For MT8183 family of SoCs - - "mediatek,mt8365-thermal" : For MT8365 family of SoCs - - "mediatek,mt8516-thermal", "mediatek,mt2701-thermal : For MT8516 family of SoCs -- reg: Address range of the thermal controller -- interrupts: IRQ for the thermal controller -- clocks, clock-names: Clocks needed for the thermal controller. required - clocks are: - "therm": Main clock needed for register access - "auxadc": The AUXADC clock -- mediatek,auxadc: A phandle to the AUXADC which the thermal controller uses -- mediatek,apmixedsys: A phandle to the APMIXEDSYS controller. -- #thermal-sensor-cells : Should be 0. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description. - -Optional properties: -- resets: Reference to the reset controller controlling the thermal controller. -- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If - unspecified default values shall be used. -- nvmem-cell-names: Should be "calibration-data" - -Example: - - thermal: thermal@1100b000 { - #thermal-sensor-cells = <1>; - compatible = "mediatek,mt8173-thermal"; - reg = <0 0x1100b000 0 0x1000>; - interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>; - clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>; - clock-names = "therm", "auxadc"; - resets = <&pericfg MT8173_PERI_THERM_SW_RST>; - reset-names = "therm"; - mediatek,auxadc = <&auxadc>; - mediatek,apmixedsys = <&apmixedsys>; - nvmem-cells = <&thermal_calibration_data>; - nvmem-cell-names = "calibration-data"; - }; diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml index 01253d58bf..7541e27704 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml @@ -114,12 +114,14 @@ examples: - | #include <dt-bindings/iio/qcom,spmi-vadc.h> #include <dt-bindings/interrupt-controller/irq.h> - spmi_bus { + + pmic { #address-cells = <1>; #size-cells = <0>; + pm8998_adc: adc@3100 { - reg = <0x3100>; compatible = "qcom,spmi-adc-rev2"; + reg = <0x3100>; #address-cells = <1>; #size-cells = <0>; #io-channel-cells = <1>; @@ -130,7 +132,7 @@ examples: }; }; - pm8998_adc_tm: adc-tm@3400 { + adc-tm@3400 { compatible = "qcom,spmi-adc-tm-hc"; reg = <0x3400>; interrupts = <0x2 0x34 0x0 IRQ_TYPE_EDGE_RISING>; diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml index 3c81def03c..d9d2657287 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml @@ -167,12 +167,14 @@ examples: - | #include <dt-bindings/iio/qcom,spmi-vadc.h> #include <dt-bindings/interrupt-controller/irq.h> - spmi_bus { + + pmic { #address-cells = <1>; #size-cells = <0>; + pm8150b_adc: adc@3100 { - reg = <0x3100>; compatible = "qcom,spmi-adc5"; + reg = <0x3100>; #address-cells = <1>; #size-cells = <0>; #io-channel-cells = <1>; @@ -186,7 +188,7 @@ examples: }; }; - pm8150b_adc_tm: adc-tm@3500 { + adc-tm@3500 { compatible = "qcom,spmi-adc-tm5"; reg = <0x3500>; interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>; @@ -207,12 +209,14 @@ examples: #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> #include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h> #include <dt-bindings/interrupt-controller/irq.h> - spmi_bus { + + pmic { #address-cells = <1>; #size-cells = <0>; + pmk8350_vadc: adc@3100 { - reg = <0x3100>; compatible = "qcom,spmi-adc7"; + reg = <0x3100>; #address-cells = <1>; #size-cells = <0>; #io-channel-cells = <1>; @@ -233,7 +237,7 @@ examples: }; }; - pmk8350_adc_tm: adc-tm@3400 { + adc-tm@3400 { compatible = "qcom,spmi-adc-tm5-gen2"; reg = <0x3400>; interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>; diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index 437b747328..99d9c526c0 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -66,6 +66,7 @@ properties: - qcom,sm8350-tsens - qcom,sm8450-tsens - qcom,sm8550-tsens + - qcom,sm8650-tsens - const: qcom,tsens-v2 - description: v2 of TSENS with combined interrupt diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml index 4a8dabc481..dbd52620d2 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml @@ -75,6 +75,22 @@ patternProperties: framework and assumes that the thermal sensors in this zone support interrupts. + critical-action: + $ref: /schemas/types.yaml#/definitions/string + description: | + The action the OS should perform after the critical temperature is reached. + By default the system will shutdown as a safe action to prevent damage + to the hardware, if the property is not set. + The shutdown action should be always the default and preferred one. + Choose 'reboot' with care, as the hardware may be in thermal stress, + thus leading to infinite reboots that may cause damage to the hardware. + Make sure the firmware/bootloader will act as the last resort and take + over the thermal control. + + enum: + - shutdown + - reboot + thermal-sensors: $ref: /schemas/types.yaml#/definitions/phandle-array maxItems: 1 |