1 files changed, 87 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/tpm/tpm-common.yaml b/Documentation/devicetree/bindings/tpm/tpm-common.yaml
new file mode 100644
index 0000000000..3c1241b2a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/tpm/tpm-common.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/tpm/tpm-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Trusted Platform Module common properties
+
+maintainers:
+  - Lukas Wunner <lukas@wunner.de>
+
+properties:
+  $nodename:
+    pattern: '^tpm(@[0-9a-f]+)?$'
+
+  interrupts:
+    description: indicates command completion
+    maxItems: 1
+
+  label:
+    description: human readable string describing the device, e.g. "tpm"
+
+  linux,sml-base:
+    description:
+      base address of reserved memory allocated for firmware event log
+    $ref: /schemas/types.yaml#/definitions/uint64
+
+  linux,sml-size:
+    description:
+      size of reserved memory allocated for firmware event log
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  memory-region:
+    description: reserved memory allocated for firmware event log
+    maxItems: 1
+
+  powered-while-suspended:
+    description:
+      present when the TPM is left powered on between suspend and resume
+      (makes the suspend/resume callbacks do nothing)
+    type: boolean
+
+  resets:
+    description: Reset controller to reset the TPM
+    maxItems: 1
+
+  reset-gpios:
+    description: Output GPIO pin to reset the TPM
+    maxItems: 1
+
+# must always have both linux,sml-base and linux,sml-size
+dependentRequired:
+  linux,sml-base: ['linux,sml-size']
+  linux,sml-size: ['linux,sml-base']
+
+# must only have either memory-region or linux,sml-base
+# as well as either resets or reset-gpios
+dependentSchemas:
+  memory-region:
+    properties:
+      linux,sml-base: false
+  linux,sml-base:
+    properties:
+      memory-region: false
+  resets:
+    properties:
+      reset-gpios: false
+  reset-gpios:
+    properties:
+      resets: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            pattern: '^st,st33zp24'
+    then:
+      properties:
+        lpcpd-gpios:
+          description:
+            Output GPIO pin used for ST33ZP24 power management of D1/D2 state.
+            If set, power must be present when the platform is going into
+            sleep/hibernate mode.
+          maxItems: 1
+
+additionalProperties: true