summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/usb/atmel-usb.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/usb/atmel-usb.txt')
-rw-r--r--Documentation/devicetree/bindings/usb/atmel-usb.txt125
1 files changed, 125 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt
new file mode 100644
index 000000000..12183ef47
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt
@@ -0,0 +1,125 @@
+Atmel SOC USB controllers
+
+OHCI
+
+Required properties:
+ - compatible: Should be "atmel,at91rm9200-ohci" for USB controllers
+ used in host mode.
+ - reg: Address and length of the register set for the device
+ - interrupts: Should contain ohci interrupt
+ - clocks: Should reference the peripheral, host and system clocks
+ - clock-names: Should contain three strings
+ "ohci_clk" for the peripheral clock
+ "hclk" for the host clock
+ "uhpck" for the system clock
+ - num-ports: Number of ports.
+ - atmel,vbus-gpio: If present, specifies a gpio that needs to be
+ activated for the bus to be powered.
+ - atmel,oc-gpio: If present, specifies a gpio that needs to be
+ activated for the overcurrent detection.
+
+usb0: ohci@500000 {
+ compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+ reg = <0x00500000 0x100000>;
+ clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+ clock-names = "ohci_clk", "hclk", "uhpck";
+ interrupts = <20 4>;
+ num-ports = <2>;
+};
+
+EHCI
+
+Required properties:
+ - compatible: Should be "atmel,at91sam9g45-ehci" for USB controllers
+ used in host mode.
+ - reg: Address and length of the register set for the device
+ - interrupts: Should contain ehci interrupt
+ - clocks: Should reference the peripheral and the UTMI clocks
+ - clock-names: Should contain two strings
+ "ehci_clk" for the peripheral clock
+ "usb_clk" for the UTMI clock
+
+Optional properties:
+ - phy_type : For multi port host USB controllers, should be one of
+ "utmi", or "hsic".
+
+usb1: ehci@800000 {
+ compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+ reg = <0x00800000 0x100000>;
+ interrupts = <22 4>;
+ clocks = <&utmi>, <&uhphs_clk>;
+ clock-names = "usb_clk", "ehci_clk";
+};
+
+AT91 USB device controller
+
+Required properties:
+ - compatible: Should be one of the following
+ "atmel,at91rm9200-udc"
+ "atmel,at91sam9260-udc"
+ "atmel,at91sam9261-udc"
+ "atmel,at91sam9263-udc"
+ - reg: Address and length of the register set for the device
+ - interrupts: Should contain macb interrupt
+ - clocks: Should reference the peripheral and the AHB clocks
+ - clock-names: Should contain two strings
+ "pclk" for the peripheral clock
+ "hclk" for the AHB clock
+
+Optional properties:
+ - atmel,vbus-gpio: If present, specifies a gpio that needs to be
+ activated for the bus to be powered.
+
+usb1: gadget@fffa4000 {
+ compatible = "atmel,at91rm9200-udc";
+ reg = <0xfffa4000 0x4000>;
+ interrupts = <10 4>;
+ clocks = <&udc_clk>, <&udpck>;
+ clock-names = "pclk", "hclk";
+ atmel,vbus-gpio = <&pioC 5 0>;
+};
+
+Atmel High-Speed USB device controller
+
+Required properties:
+ - compatible: Should be one of the following
+ "atmel,at91sam9rl-udc"
+ "atmel,at91sam9g45-udc"
+ "atmel,sama5d3-udc"
+ "microchip,sam9x60-udc"
+ "microchip,lan9662-udc"
+ For "microchip,lan9662-udc" the fallback "atmel,sama5d3-udc"
+ is required.
+ - reg: Address and length of the register set for the device
+ - interrupts: Should contain usba interrupt
+ - clocks: Should reference the peripheral and host clocks
+ - clock-names: Should contain two strings
+ "pclk" for the peripheral clock
+ "hclk" for the host clock
+
+Deprecated property:
+ - ep childnode: To specify the number of endpoints and their properties.
+
+Optional properties:
+ - atmel,vbus-gpio: If present, specifies a gpio that allows to detect whether
+ vbus is present (USB is connected).
+
+Deprecated child node properties:
+ - name: Name of the endpoint.
+ - reg: Num of the endpoint.
+ - atmel,fifo-size: Size of the fifo.
+ - atmel,nb-banks: Number of banks.
+ - atmel,can-dma: Boolean to specify if the endpoint support DMA.
+ - atmel,can-isoc: Boolean to specify if the endpoint support ISOC.
+
+usb2: gadget@fff78000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91sam9rl-udc";
+ reg = <0x00600000 0x80000
+ 0xfff78000 0x400>;
+ interrupts = <27 4 0>;
+ clocks = <&utmi>, <&udphs_clk>;
+ clock-names = "hclk", "pclk";
+ atmel,vbus-gpio = <&pioB 19 0>;
+};