summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/w1/w1-uart.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/w1/w1-uart.yaml')
-rw-r--r--Documentation/devicetree/bindings/w1/w1-uart.yaml59
1 files changed, 59 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/w1/w1-uart.yaml b/Documentation/devicetree/bindings/w1/w1-uart.yaml
new file mode 100644
index 0000000000..bd7c62d780
--- /dev/null
+++ b/Documentation/devicetree/bindings/w1/w1-uart.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/w1/w1-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UART 1-Wire Bus
+
+maintainers:
+ - Christoph Winklhofer <cj.winklhofer@gmail.com>
+
+description: |
+ UART 1-wire bus. Utilizes the UART interface via the Serial Device Bus
+ to create the 1-Wire timing patterns.
+
+ The UART peripheral must support full-duplex and operate in open-drain
+ mode. The timing patterns are generated by a specific combination of
+ baud-rate and transmitted byte, which corresponds to a 1-Wire read bit,
+ write bit or reset pulse.
+
+ The default baud-rate for reset and presence detection is 9600 and for
+ a 1-Wire read or write operation 115200. In case the actual baud-rate
+ is different from the requested one, the transmitted byte is adapted
+ to generate the 1-Wire timing patterns.
+
+ https://www.analog.com/en/technical-articles/using-a-uart-to-implement-a-1wire-bus-master.html
+
+properties:
+ compatible:
+ const: w1-uart
+
+ reset-bps:
+ default: 9600
+ description:
+ The baud rate for the 1-Wire reset and presence detect.
+
+ write-0-bps:
+ default: 115200
+ description:
+ The baud rate for the 1-Wire write-0 cycle.
+
+ write-1-bps:
+ default: 115200
+ description:
+ The baud rate for the 1-Wire write-1 and read cycle.
+
+required:
+ - compatible
+
+additionalProperties:
+ type: object
+
+examples:
+ - |
+ serial {
+ onewire {
+ compatible = "w1-uart";
+ };
+ };