diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
4 files changed, 38 insertions, 11 deletions
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml index cf456f8d9d..c87677f5e2 100644 --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml @@ -37,15 +37,15 @@ properties: active low. maxItems: 1 - dovdd-supply: + DOVDD-supply: description: Definition of the regulator used as interface power supply. - avdd-supply: + AVDD-supply: description: Definition of the regulator used as analog power supply. - dvdd-supply: + DVDD-supply: description: Definition of the regulator used as digital power supply. @@ -59,9 +59,9 @@ required: - reg - clocks - clock-names - - dovdd-supply - - avdd-supply - - dvdd-supply + - DOVDD-supply + - AVDD-supply + - DVDD-supply - reset-gpios - port @@ -82,9 +82,9 @@ examples: clock-names = "xvclk"; reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; - dovdd-supply = <&sw2_reg>; - dvdd-supply = <&sw2_reg>; - avdd-supply = <®_peri_3p15v>; + DOVDD-supply = <&sw2_reg>; + DVDD-supply = <&sw2_reg>; + AVDD-supply = <®_peri_3p15v>; port { ov2680_to_mipi: endpoint { diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml index 9793ea6f0f..575555810c 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml @@ -165,6 +165,7 @@ allOf: unevaluatedProperties: false pcie-phy: + type: object description: Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt diff --git a/Documentation/devicetree/bindings/sound/rt5645.txt b/Documentation/devicetree/bindings/sound/rt5645.txt index 41a62fd2ae..c1fa379f5f 100644 --- a/Documentation/devicetree/bindings/sound/rt5645.txt +++ b/Documentation/devicetree/bindings/sound/rt5645.txt @@ -20,6 +20,11 @@ Optional properties: a GPIO spec for the external headphone detect pin. If jd-mode = 0, we will get the JD status by getting the value of hp-detect-gpios. +- cbj-sleeve-gpios: + a GPIO spec to control the external combo jack circuit to tie the sleeve/ring2 + contacts to the ground or floating. It could avoid some electric noise from the + active speaker jacks. + - realtek,in2-differential Boolean. Indicate MIC2 input are differential, rather than single-ended. @@ -68,6 +73,7 @@ codec: rt5650@1a { compatible = "realtek,rt5650"; reg = <0x1a>; hp-detect-gpios = <&gpio 19 0>; + cbj-sleeve-gpios = <&gpio 20 0>; interrupt-parent = <&gpio>; interrupts = <7 IRQ_TYPE_EDGE_FALLING>; realtek,dmic-en = "true"; diff --git a/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml b/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml index b634f57cd0..ca81c8afba 100644 --- a/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml @@ -18,13 +18,15 @@ properties: oneOf: - enum: - loongson,ls2k1000-thermal + - loongson,ls2k2000-thermal - items: - enum: - - loongson,ls2k2000-thermal + - loongson,ls2k0500-thermal - const: loongson,ls2k1000-thermal reg: - maxItems: 1 + minItems: 1 + maxItems: 2 interrupts: maxItems: 1 @@ -38,6 +40,24 @@ required: - interrupts - '#thermal-sensor-cells' +if: + properties: + compatible: + contains: + enum: + - loongson,ls2k2000-thermal + +then: + properties: + reg: + minItems: 2 + maxItems: 2 + +else: + properties: + reg: + maxItems: 1 + unevaluatedProperties: false examples: |