diff options
Diffstat (limited to 'Documentation/gpu/todo.rst')
| -rw-r--r-- | Documentation/gpu/todo.rst | 797 |
1 files changed, 797 insertions, 0 deletions
diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst new file mode 100644 index 0000000000..85bbe05436 --- /dev/null +++ b/Documentation/gpu/todo.rst @@ -0,0 +1,797 @@ +.. _todo: + +========= +TODO list +========= + +This section contains a list of smaller janitorial tasks in the kernel DRM +graphics subsystem useful as newbie projects. Or for slow rainy days. + +Difficulty +---------- + +To make it easier task are categorized into different levels: + +Starter: Good tasks to get started with the DRM subsystem. + +Intermediate: Tasks which need some experience with working in the DRM +subsystem, or some specific GPU/display graphics knowledge. For debugging issue +it's good to have the relevant hardware (or a virtual driver set up) available +for testing. + +Advanced: Tricky tasks that need fairly good understanding of the DRM subsystem +and graphics topics. Generally need the relevant hardware for development and +testing. + +Expert: Only attempt these if you've successfully completed some tricky +refactorings already and are an expert in the specific area + +Subsystem-wide refactorings +=========================== + +Remove custom dumb_map_offset implementations +--------------------------------------------- + +All GEM based drivers should be using drm_gem_create_mmap_offset() instead. +Audit each individual driver, make sure it'll work with the generic +implementation (there's lots of outdated locking leftovers in various +implementations), and then remove it. + +Contact: Daniel Vetter, respective driver maintainers + +Level: Intermediate + +Convert existing KMS drivers to atomic modesetting +-------------------------------------------------- + +3.19 has the atomic modeset interfaces and helpers, so drivers can now be +converted over. Modern compositors like Wayland or Surfaceflinger on Android +really want an atomic modeset interface, so this is all about the bright +future. + +There is a conversion guide for atomic [1]_ and all you need is a GPU for a +non-converted driver. The "Atomic mode setting design overview" series [2]_ +[3]_ at LWN.net can also be helpful. + +As part of this drivers also need to convert to universal plane (which means +exposing primary & cursor as proper plane objects). But that's much easier to +do by directly using the new atomic helper driver callbacks. + + .. [1] https://blog.ffwll.ch/2014/11/atomic-modeset-support-for-kms-drivers.html + .. [2] https://lwn.net/Articles/653071/ + .. [3] https://lwn.net/Articles/653466/ + +Contact: Daniel Vetter, respective driver maintainers + +Level: Advanced + +Clean up the clipped coordination confusion around planes +--------------------------------------------------------- + +We have a helper to get this right with drm_plane_helper_check_update(), but +it's not consistently used. This should be fixed, preferably in the atomic +helpers (and drivers then moved over to clipped coordinates). Probably the +helper should also be moved from drm_plane_helper.c to the atomic helpers, to +avoid confusion - the other helpers in that file are all deprecated legacy +helpers. + +Contact: Ville Syrjälä, Daniel Vetter, driver maintainers + +Level: Advanced + +Improve plane atomic_check helpers +---------------------------------- + +Aside from the clipped coordinates right above there's a few suboptimal things +with the current helpers: + +- drm_plane_helper_funcs->atomic_check gets called for enabled or disabled + planes. At best this seems to confuse drivers, worst it means they blow up + when the plane is disabled without the CRTC. The only special handling is + resetting values in the plane state structures, which instead should be moved + into the drm_plane_funcs->atomic_duplicate_state functions. + +- Once that's done, helpers could stop calling ->atomic_check for disabled + planes. + +- Then we could go through all the drivers and remove the more-or-less confused + checks for plane_state->fb and plane_state->crtc. + +Contact: Daniel Vetter + +Level: Advanced + +Convert early atomic drivers to async commit helpers +---------------------------------------------------- + +For the first year the atomic modeset helpers didn't support asynchronous / +nonblocking commits, and every driver had to hand-roll them. This is fixed +now, but there's still a pile of existing drivers that easily could be +converted over to the new infrastructure. + +One issue with the helpers is that they require that drivers handle completion +events for atomic commits correctly. But fixing these bugs is good anyway. + +Somewhat related is the legacy_cursor_update hack, which should be replaced with +the new atomic_async_check/commit functionality in the helpers in drivers that +still look at that flag. + +Contact: Daniel Vetter, respective driver maintainers + +Level: Advanced + +Fallout from atomic KMS +----------------------- + +``drm_atomic_helper.c`` provides a batch of functions which implement legacy +IOCTLs on top of the new atomic driver interface. Which is really nice for +gradual conversion of drivers, but unfortunately the semantic mismatches are +a bit too severe. So there's some follow-up work to adjust the function +interfaces to fix these issues: + +* atomic needs the lock acquire context. At the moment that's passed around + implicitly with some horrible hacks, and it's also allocate with + ``GFP_NOFAIL`` behind the scenes. All legacy paths need to start allocating + the acquire context explicitly on stack and then also pass it down into + drivers explicitly so that the legacy-on-atomic functions can use them. + + Except for some driver code this is done. This task should be finished by + adding WARN_ON(!drm_drv_uses_atomic_modeset) in drm_modeset_lock_all(). + +* A bunch of the vtable hooks are now in the wrong place: DRM has a split + between core vfunc tables (named ``drm_foo_funcs``), which are used to + implement the userspace ABI. And then there's the optional hooks for the + helper libraries (name ``drm_foo_helper_funcs``), which are purely for + internal use. Some of these hooks should be move from ``_funcs`` to + ``_helper_funcs`` since they are not part of the core ABI. There's a + ``FIXME`` comment in the kerneldoc for each such case in ``drm_crtc.h``. + +Contact: Daniel Vetter + +Level: Intermediate + +Get rid of dev->struct_mutex from GEM drivers +--------------------------------------------- + +``dev->struct_mutex`` is the Big DRM Lock from legacy days and infested +everything. Nowadays in modern drivers the only bit where it's mandatory is +serializing GEM buffer object destruction. Which unfortunately means drivers +have to keep track of that lock and either call ``unreference`` or +``unreference_locked`` depending upon context. + +Core GEM doesn't have a need for ``struct_mutex`` any more since kernel 4.8, +and there's a GEM object ``free`` callback for any drivers which are +entirely ``struct_mutex`` free. + +For drivers that need ``struct_mutex`` it should be replaced with a driver- +private lock. The tricky part is the BO free functions, since those can't +reliably take that lock any more. Instead state needs to be protected with +suitable subordinate locks or some cleanup work pushed to a worker thread. For +performance-critical drivers it might also be better to go with a more +fine-grained per-buffer object and per-context lockings scheme. Currently only +the ``msm`` and `i915` drivers use ``struct_mutex``. + +Contact: Daniel Vetter, respective driver maintainers + +Level: Advanced + +Move Buffer Object Locking to dma_resv_lock() +--------------------------------------------- + +Many drivers have their own per-object locking scheme, usually using +mutex_lock(). This causes all kinds of trouble for buffer sharing, since +depending which driver is the exporter and importer, the locking hierarchy is +reversed. + +To solve this we need one standard per-object locking mechanism, which is +dma_resv_lock(). This lock needs to be called as the outermost lock, with all +other driver specific per-object locks removed. The problem is that rolling out +the actual change to the locking contract is a flag day, due to struct dma_buf +buffer sharing. + +Level: Expert + +Convert logging to drm_* functions with drm_device parameter +------------------------------------------------------------ + +For drivers which could have multiple instances, it is necessary to +differentiate between which is which in the logs. Since DRM_INFO/WARN/ERROR +don't do this, drivers used dev_info/warn/err to make this differentiation. We +now have drm_* variants of the drm print functions, so we can start to convert +those drivers back to using drm-formatted specific log messages. + +Before you start this conversion please contact the relevant maintainers to make +sure your work will be merged - not everyone agrees that the DRM dmesg macros +are better. + +Contact: Sean Paul, Maintainer of the driver you plan to convert + +Level: Starter + +Convert drivers to use simple modeset suspend/resume +---------------------------------------------------- + +Most drivers (except i915 and nouveau) that use +drm_atomic_helper_suspend/resume() can probably be converted to use +drm_mode_config_helper_suspend/resume(). Also there's still open-coded version +of the atomic suspend/resume code in older atomic modeset drivers. + +Contact: Maintainer of the driver you plan to convert + +Level: Intermediate + +Convert drivers to use drm_fbdev_generic_setup() +------------------------------------------------ + +Most drivers can use drm_fbdev_generic_setup(). Driver have to implement +atomic modesetting and GEM vmap support. Historically, generic fbdev emulation +expected the framebuffer in system memory or system-like memory. By employing +struct iosys_map, drivers with frambuffers in I/O memory can be supported +as well. + +Contact: Maintainer of the driver you plan to convert + +Level: Intermediate + +Reimplement functions in drm_fbdev_fb_ops without fbdev +------------------------------------------------------- + +A number of callback functions in drm_fbdev_fb_ops could benefit from +being rewritten without dependencies on the fbdev module. Some of the +helpers could further benefit from using struct iosys_map instead of +raw pointers. + +Contact: Thomas Zimmermann <tzimmermann@suse.de>, Daniel Vetter + +Level: Advanced + +Benchmark and optimize blitting and format-conversion function +-------------------------------------------------------------- + +Drawing to display memory quickly is crucial for many applications' +performance. + +On at least x86-64, sys_imageblit() is significantly slower than +cfb_imageblit(), even though both use the same blitting algorithm and +the latter is written for I/O memory. It turns out that cfb_imageblit() +uses movl instructions, while sys_imageblit apparently does not. This +seems to be a problem with gcc's optimizer. DRM's format-conversion +helpers might be subject to similar issues. + +Benchmark and optimize fbdev's sys_() helpers and DRM's format-conversion +helpers. In cases that can be further optimized, maybe implement a different +algorithm. For micro-optimizations, use movl/movq instructions explicitly. +That might possibly require architecture-specific helpers (e.g., storel() +storeq()). + +Contact: Thomas Zimmermann <tzimmermann@suse.de> + +Level: Intermediate + +drm_framebuffer_funcs and drm_mode_config_funcs.fb_create cleanup +----------------------------------------------------------------- + +A lot more drivers could be switched over to the drm_gem_framebuffer helpers. +Various hold-ups: + +- Need to switch over to the generic dirty tracking code using + drm_atomic_helper_dirtyfb first (e.g. qxl). + +- Need to switch to drm_fbdev_generic_setup(), otherwise a lot of the custom fb + setup code can't be deleted. + +- Need to switch to drm_gem_fb_create(), as now drm_gem_fb_create() checks for + valid formats for atomic drivers. + +- Many drivers subclass drm_framebuffer, we'd need a embedding compatible + version of the varios drm_gem_fb_create functions. Maybe called + drm_gem_fb_create/_with_dirty/_with_funcs as needed. + +Contact: Daniel Vetter + +Level: Intermediate + +Generic fbdev defio support +--------------------------- + +The defio support code in the fbdev core has some very specific requirements, +which means drivers need to have a special framebuffer for fbdev. The main +issue is that it uses some fields in struct page itself, which breaks shmem +gem objects (and other things). To support defio, affected drivers require +the use of a shadow buffer, which may add CPU and memory overhead. + +Possible solution would be to write our own defio mmap code in the drm fbdev +emulation. It would need to fully wrap the existing mmap ops, forwarding +everything after it has done the write-protect/mkwrite trickery: + +- In the drm_fbdev_fb_mmap helper, if we need defio, change the + default page prots to write-protected with something like this:: + + vma->vm_page_prot = pgprot_wrprotect(vma->vm_page_prot); + +- Set the mkwrite and fsync callbacks with similar implementions to the core + fbdev defio stuff. These should all work on plain ptes, they don't actually + require a struct page. uff. These should all work on plain ptes, they don't + actually require a struct page. + +- Track the dirty pages in a separate structure (bitfield with one bit per page + should work) to avoid clobbering struct page. + +Might be good to also have some igt testcases for this. + +Contact: Daniel Vetter, Noralf Tronnes + +Level: Advanced + +connector register/unregister fixes +----------------------------------- + +- For most connectors it's a no-op to call drm_connector_register/unregister + directly from driver code, drm_dev_register/unregister take care of this + already. We can remove all of them. + +- For dp drivers it's a bit more a mess, since we need the connector to be + registered when calling drm_dp_aux_register. Fix this by instead calling + drm_dp_aux_init, and moving the actual registering into a late_register + callback as recommended in the kerneldoc. + +Level: Intermediate + +Remove load/unload callbacks +---------------------------- + +The load/unload callbacks in struct &drm_driver are very much midlayers, plus +for historical reasons they get the ordering wrong (and we can't fix that) +between setting up the &drm_driver structure and calling drm_dev_register(). + +- Rework drivers to no longer use the load/unload callbacks, directly coding the + load/unload sequence into the driver's probe function. + +- Once all drivers are converted, remove the load/unload callbacks. + +Contact: Daniel Vetter + +Level: Intermediate + +Replace drm_detect_hdmi_monitor() with drm_display_info.is_hdmi +--------------------------------------------------------------- + +Once EDID is parsed, the monitor HDMI support information is available through +drm_display_info.is_hdmi. Many drivers still call drm_detect_hdmi_monitor() to +retrieve the same information, which is less efficient. + +Audit each individual driver calling drm_detect_hdmi_monitor() and switch to +drm_display_info.is_hdmi if applicable. + +Contact: Laurent Pinchart, respective driver maintainers + +Level: Intermediate + +Consolidate custom driver modeset properties +-------------------------------------------- + +Before atomic modeset took place, many drivers where creating their own +properties. Among other things, atomic brought the requirement that custom, +driver specific properties should not be used. + +For this task, we aim to introduce core helpers or reuse the existing ones +if available: + +A quick, unconfirmed, examples list. + +Introduce core helpers: +- audio (amdgpu, intel, gma500, radeon) +- brightness, contrast, etc (armada, nouveau) - overlay only (?) +- broadcast rgb (gma500, intel) +- colorkey (armada, nouveau, rcar) - overlay only (?) +- dither (amdgpu, nouveau, radeon) - varies across drivers +- underscan family (amdgpu, radeon, nouveau) + +Already in core: +- colorspace (sti) +- tv format names, enhancements (gma500, intel) +- tv overscan, margins, etc. (gma500, intel) +- zorder (omapdrm) - same as zpos (?) + + +Contact: Emil Velikov, respective driver maintainers + +Level: Intermediate + +Use struct iosys_map throughout codebase +---------------------------------------- + +Pointers to shared device memory are stored in struct iosys_map. Each +instance knows whether it refers to system or I/O memory. Most of the DRM-wide +interface have been converted to use struct iosys_map, but implementations +often still use raw pointers. + +The task is to use struct iosys_map where it makes sense. + +* Memory managers should use struct iosys_map for dma-buf-imported buffers. +* TTM might benefit from using struct iosys_map internally. +* Framebuffer copying and blitting helpers should operate on struct iosys_map. + +Contact: Thomas Zimmermann <tzimmermann@suse.de>, Christian König, Daniel Vetter + +Level: Intermediate + +Review all drivers for setting struct drm_mode_config.{max_width,max_height} correctly +-------------------------------------------------------------------------------------- + +The values in struct drm_mode_config.{max_width,max_height} describe the +maximum supported framebuffer size. It's the virtual screen size, but many +drivers treat it like limitations of the physical resolution. + +The maximum width depends on the hardware's maximum scanline pitch. The +maximum height depends on the amount of addressable video memory. Review all +drivers to initialize the fields to the correct values. + +Contact: Thomas Zimmermann <tzimmermann@suse.de> + +Level: Intermediate + +Request memory regions in all drivers +------------------------------------- + +Go through all drivers and add code to request the memory regions that the +driver uses. This requires adding calls to request_mem_region(), +pci_request_region() or similar functions. Use helpers for managed cleanup +where possible. + +Drivers are pretty bad at doing this and there used to be conflicts among +DRM and fbdev drivers. Still, it's the correct thing to do. + +Contact: Thomas Zimmermann <tzimmermann@suse.de> + +Level: Starter + +Remove driver dependencies on FB_DEVICE +--------------------------------------- + +A number of fbdev drivers provide attributes via sysfs and therefore depend +on CONFIG_FB_DEVICE to be selected. Review each driver and attempt to make +any dependencies on CONFIG_FB_DEVICE optional. At the minimum, the respective +code in the driver could be conditionalized via ifdef CONFIG_FB_DEVICE. Not +all drivers might be able to drop CONFIG_FB_DEVICE. + +Contact: Thomas Zimmermann <tzimmermann@suse.de> + +Level: Starter + +Clean up checks for already prepared/enabled in panels +------------------------------------------------------ + +In a whole pile of panel drivers, we have code to make the +prepare/unprepare/enable/disable callbacks behave as no-ops if they've already +been called. To get some idea of the duplicated code, try:: + + git grep 'if.*>prepared' -- drivers/gpu/drm/panel + git grep 'if.*>enabled' -- drivers/gpu/drm/panel + +In the patch ("drm/panel: Check for already prepared/enabled in drm_panel") +we've moved this check to the core. Now we can most definitely remove the +check from the individual panels and save a pile of code. + +In adition to removing the check from the individual panels, it is believed +that even the core shouldn't need this check and that should be considered +an error if other code ever relies on this check. The check in the core +currently prints a warning whenever something is relying on this check with +dev_warn(). After a little while, we likely want to promote this to a +WARN(1) to help encourage folks not to rely on this behavior. + +Contact: Douglas Anderson <dianders@chromium.org> + +Level: Starter/Intermediate + + +Core refactorings +================= + +Make panic handling work +------------------------ + +This is a really varied tasks with lots of little bits and pieces: + +* The panic path can't be tested currently, leading to constant breaking. The + main issue here is that panics can be triggered from hardirq contexts and + hence all panic related callback can run in hardirq context. It would be + awesome if we could test at least the fbdev helper code and driver code by + e.g. trigger calls through drm debugfs files. hardirq context could be + achieved by using an IPI to the local processor. + +* There's a massive confusion of different panic handlers. DRM fbdev emulation + helpers had their own (long removed), but on top of that the fbcon code itself + also has one. We need to make sure that they stop fighting over each other. + This is worked around by checking ``oops_in_progress`` at various entry points + into the DRM fbdev emulation helpers. A much cleaner approach here would be to + switch fbcon to the `threaded printk support + <https://lwn.net/Articles/800946/>`_. + +* ``drm_can_sleep()`` is a mess. It hides real bugs in normal operations and + isn't a full solution for panic paths. We need to make sure that it only + returns true if there's a panic going on for real, and fix up all the + fallout. + +* The panic handler must never sleep, which also means it can't ever + ``mutex_lock()``. Also it can't grab any other lock unconditionally, not + even spinlocks (because NMI and hardirq can panic too). We need to either + make sure to not call such paths, or trylock everything. Really tricky. + +* A clean solution would be an entirely separate panic output support in KMS, + bypassing the current fbcon support. See `[PATCH v2 0/3] drm: Add panic handling + <https://lore.kernel.org/dri-devel/20190311174218.51899-1-noralf@tronnes.org/>`_. + +* Encoding the actual oops and preceding dmesg in a QR might help with the + dread "important stuff scrolled away" problem. See `[RFC][PATCH] Oops messages + transfer using QR codes + <https://lore.kernel.org/lkml/1446217392-11981-1-git-send-email-alexandru.murtaza@intel.com/>`_ + for some example code that could be reused. + +Contact: Daniel Vetter + +Level: Advanced + +Clean up the debugfs support +---------------------------- + +There's a bunch of issues with it: + +- Convert drivers to support the drm_debugfs_add_files() function instead of + the drm_debugfs_create_files() function. + +- Improve late-register debugfs by rolling out the same debugfs pre-register + infrastructure for connector and crtc too. That way, the drivers won't need to + split their setup code into init and register anymore. + +- We probably want to have some support for debugfs files on crtc/connectors and + maybe other kms objects directly in core. There's even drm_print support in + the funcs for these objects to dump kms state, so it's all there. And then the + ->show() functions should obviously give you a pointer to the right object. + +- The drm_driver->debugfs_init hooks we have is just an artifact of the old + midlayered load sequence. DRM debugfs should work more like sysfs, where you + can create properties/files for an object anytime you want, and the core + takes care of publishing/unpuplishing all the files at register/unregister + time. Drivers shouldn't need to worry about these technicalities, and fixing + this (together with the drm_minor->drm_device move) would allow us to remove + debugfs_init. + +Contact: Daniel Vetter + +Level: Intermediate + +Object lifetime fixes +--------------------- + +There's two related issues here + +- Cleanup up the various ->destroy callbacks, which often are all the same + simple code. + +- Lots of drivers erroneously allocate DRM modeset objects using devm_kzalloc, + which results in use-after free issues on driver unload. This can be serious + trouble even for drivers for hardware integrated on the SoC due to + EPROBE_DEFERRED backoff. + +Both these problems can be solved by switching over to drmm_kzalloc(), and the +various convenience wrappers provided, e.g. drmm_crtc_alloc_with_planes(), +drmm_universal_plane_alloc(), ... and so on. + +Contact: Daniel Vetter + +Level: Intermediate + +Remove automatic page mapping from dma-buf importing +---------------------------------------------------- + +When importing dma-bufs, the dma-buf and PRIME frameworks automatically map +imported pages into the importer's DMA area. drm_gem_prime_fd_to_handle() and +drm_gem_prime_handle_to_fd() require that importers call dma_buf_attach() +even if they never do actual device DMA, but only CPU access through +dma_buf_vmap(). This is a problem for USB devices, which do not support DMA +operations. + +To fix the issue, automatic page mappings should be removed from the +buffer-sharing code. Fixing this is a bit more involved, since the import/export +cache is also tied to &drm_gem_object.import_attach. Meanwhile we paper over +this problem for USB devices by fishing out the USB host controller device, as +long as that supports DMA. Otherwise importing can still needlessly fail. + +Contact: Thomas Zimmermann <tzimmermann@suse.de>, Daniel Vetter + +Level: Advanced + + +Better Testing +============== + +Add unit tests using the Kernel Unit Testing (KUnit) framework +-------------------------------------------------------------- + +The `KUnit <https://www.kernel.org/doc/html/latest/dev-tools/kunit/index.html>`_ +provides a common framework for unit tests within the Linux kernel. Having a +test suite would allow to identify regressions earlier. + +A good candidate for the first unit tests are the format-conversion helpers in +``drm_format_helper.c``. + +Contact: Javier Martinez Canillas <javierm@redhat.com> + +Level: Intermediate + +Enable trinity for DRM +---------------------- + +And fix up the fallout. Should be really interesting ... + +Level: Advanced + +Make KMS tests in i-g-t generic +------------------------------- + +The i915 driver team maintains an extensive testsuite for the i915 DRM driver, +including tons of testcases for corner-cases in the modesetting API. It would +be awesome if those tests (at least the ones not relying on Intel-specific GEM +features) could be made to run on any KMS driver. + +Basic work to run i-g-t tests on non-i915 is done, what's now missing is mass- +converting things over. For modeset tests we also first need a bit of +infrastructure to use dumb buffers for untiled buffers, to be able to run all +the non-i915 specific modeset tests. + +Level: Advanced + +Extend virtual test driver (VKMS) +--------------------------------- + +See the documentation of :ref:`VKMS <vkms>` for more details. This is an ideal +internship task, since it only requires a virtual machine and can be sized to +fit the available time. + +Level: See details + +Backlight Refactoring +--------------------- + +Backlight drivers have a triple enable/disable state, which is a bit overkill. +Plan to fix this: + +1. Roll out backlight_enable() and backlight_disable() helpers everywhere. This + has started already. +2. In all, only look at one of the three status bits set by the above helpers. +3. Remove the other two status bits. + +Contact: Daniel Vetter + +Level: Intermediate + +Driver Specific +=============== + +AMD DC Display Driver +--------------------- + +AMD DC is the display driver for AMD devices starting with Vega. There has been +a bunch of progress cleaning it up but there's still plenty of work to be done. + +See drivers/gpu/drm/amd/display/TODO for tasks. + +Contact: Harry Wentland, Alex Deucher + +Bootsplash +========== + +There is support in place now for writing internal DRM clients making it +possible to pick up the bootsplash work that was rejected because it was written +for fbdev. + +- [v6,8/8] drm/client: Hack: Add bootsplash example + https://patchwork.freedesktop.org/patch/306579/ + +- [RFC PATCH v2 00/13] Kernel based bootsplash + https://lore.kernel.org/r/20171213194755.3409-1-mstaudt@suse.de + +Contact: Sam Ravnborg + +Level: Advanced + +Brightness handling on devices with multiple internal panels +============================================================ + +On x86/ACPI devices there can be multiple backlight firmware interfaces: +(ACPI) video, vendor specific and others. As well as direct/native (PWM) +register programming by the KMS driver. + +To deal with this backlight drivers used on x86/ACPI call +acpi_video_get_backlight_type() which has heuristics (+quirks) to select +which backlight interface to use; and backlight drivers which do not match +the returned type will not register themselves, so that only one backlight +device gets registered (in a single GPU setup, see below). + +At the moment this more or less assumes that there will only +be 1 (internal) panel on a system. + +On systems with 2 panels this may be a problem, depending on +what interface acpi_video_get_backlight_type() selects: + +1. native: in this case the KMS driver is expected to know which backlight + device belongs to which output so everything should just work. +2. video: this does support controlling multiple backlights, but some work + will need to be done to get the output <-> backlight device mapping + +The above assumes both panels will require the same backlight interface type. +Things will break on systems with multiple panels where the 2 panels need +a different type of control. E.g. one panel needs ACPI video backlight control, +where as the other is using native backlight control. Currently in this case +only one of the 2 required backlight devices will get registered, based on +the acpi_video_get_backlight_type() return value. + +If this (theoretical) case ever shows up, then supporting this will need some +work. A possible solution here would be to pass a device and connector-name +to acpi_video_get_backlight_type() so that it can deal with this. + +Note in a way we already have a case where userspace sees 2 panels, +in dual GPU laptop setups with a mux. On those systems we may see +either 2 native backlight devices; or 2 native backlight devices. + +Userspace already has code to deal with this by detecting if the related +panel is active (iow which way the mux between the GPU and the panels +points) and then uses that backlight device. Userspace here very much +assumes a single panel though. It picks only 1 of the 2 backlight devices +and then only uses that one. + +Note that all userspace code (that I know off) is currently hardcoded +to assume a single panel. + +Before the recent changes to not register multiple (e.g. video + native) +/sys/class/backlight devices for a single panel (on a single GPU laptop), +userspace would see multiple backlight devices all controlling the same +backlight. + +To deal with this userspace had to always picks one preferred device under +/sys/class/backlight and will ignore the others. So to support brightness +control on multiple panels userspace will need to be updated too. + +There are plans to allow brightness control through the KMS API by adding +a "display brightness" property to drm_connector objects for panels. This +solves a number of issues with the /sys/class/backlight API, including not +being able to map a sysfs backlight device to a specific connector. Any +userspace changes to add support for brightness control on devices with +multiple panels really should build on top of this new KMS property. + +Contact: Hans de Goede + +Level: Advanced + +Outside DRM +=========== + +Convert fbdev drivers to DRM +---------------------------- + +There are plenty of fbdev drivers for older hardware. Some hardware has +become obsolete, but some still provides good(-enough) framebuffers. The +drivers that are still useful should be converted to DRM and afterwards +removed from fbdev. + +Very simple fbdev drivers can best be converted by starting with a new +DRM driver. Simple KMS helpers and SHMEM should be able to handle any +existing hardware. The new driver's call-back functions are filled from +existing fbdev code. + +More complex fbdev drivers can be refactored step-by-step into a DRM +driver with the help of the DRM fbconv helpers [4]_. These helpers provide +the transition layer between the DRM core infrastructure and the fbdev +driver interface. Create a new DRM driver on top of the fbconv helpers, +copy over the fbdev driver, and hook it up to the DRM code. Examples for +several fbdev drivers are available in Thomas Zimmermann's fbconv tree +[4]_, as well as a tutorial of this process [5]_. The result is a primitive +DRM driver that can run X11 and Weston. + + .. [4] https://gitlab.freedesktop.org/tzimmermann/linux/tree/fbconv + .. [5] https://gitlab.freedesktop.org/tzimmermann/linux/blob/fbconv/drivers/gpu/drm/drm_fbconv_helper.c + +Contact: Thomas Zimmermann <tzimmermann@suse.de> + +Level: Advanced |