diff options
Diffstat (limited to 'Documentation/netlink/specs/dpll.yaml')
| -rw-r--r-- | Documentation/netlink/specs/dpll.yaml | 506 |
1 files changed, 506 insertions, 0 deletions
diff --git a/Documentation/netlink/specs/dpll.yaml b/Documentation/netlink/specs/dpll.yaml new file mode 100644 index 0000000000..2b4c4bcd83 --- /dev/null +++ b/Documentation/netlink/specs/dpll.yaml @@ -0,0 +1,506 @@ +# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) + +name: dpll + +doc: DPLL subsystem. + +definitions: + - + type: enum + name: mode + doc: | + working modes a dpll can support, differentiates if and how dpll selects + one of its inputs to syntonize with it, valid values for DPLL_A_MODE + attribute + entries: + - + name: manual + doc: input can be only selected by sending a request to dpll + value: 1 + - + name: automatic + doc: highest prio input pin auto selected by dpll + render-max: true + - + type: enum + name: lock-status + doc: | + provides information of dpll device lock status, valid values for + DPLL_A_LOCK_STATUS attribute + entries: + - + name: unlocked + doc: | + dpll was not yet locked to any valid input (or forced by setting + DPLL_A_MODE to DPLL_MODE_DETACHED) + value: 1 + - + name: locked + doc: | + dpll is locked to a valid signal, but no holdover available + - + name: locked-ho-acq + doc: | + dpll is locked and holdover acquired + - + name: holdover + doc: | + dpll is in holdover state - lost a valid lock or was forced + by disconnecting all the pins (latter possible only + when dpll lock-state was already DPLL_LOCK_STATUS_LOCKED_HO_ACQ, + if dpll lock-state was not DPLL_LOCK_STATUS_LOCKED_HO_ACQ, the + dpll's lock-state shall remain DPLL_LOCK_STATUS_UNLOCKED) + render-max: true + - + type: const + name: temp-divider + value: 1000 + doc: | + temperature divider allowing userspace to calculate the + temperature as float with three digit decimal precision. + Value of (DPLL_A_TEMP / DPLL_TEMP_DIVIDER) is integer part of + temperature value. + Value of (DPLL_A_TEMP % DPLL_TEMP_DIVIDER) is fractional part of + temperature value. + - + type: enum + name: type + doc: type of dpll, valid values for DPLL_A_TYPE attribute + entries: + - + name: pps + doc: dpll produces Pulse-Per-Second signal + value: 1 + - + name: eec + doc: dpll drives the Ethernet Equipment Clock + render-max: true + - + type: enum + name: pin-type + doc: | + defines possible types of a pin, valid values for DPLL_A_PIN_TYPE + attribute + entries: + - + name: mux + doc: aggregates another layer of selectable pins + value: 1 + - + name: ext + doc: external input + - + name: synce-eth-port + doc: ethernet port PHY's recovered clock + - + name: int-oscillator + doc: device internal oscillator + - + name: gnss + doc: GNSS recovered clock + render-max: true + - + type: enum + name: pin-direction + doc: | + defines possible direction of a pin, valid values for + DPLL_A_PIN_DIRECTION attribute + entries: + - + name: input + doc: pin used as a input of a signal + value: 1 + - + name: output + doc: pin used to output the signal + render-max: true + - + type: const + name: pin-frequency-1-hz + value: 1 + - + type: const + name: pin-frequency-10-khz + value: 10000 + - + type: const + name: pin-frequency-77_5-khz + value: 77500 + - + type: const + name: pin-frequency-10-mhz + value: 10000000 + - + type: enum + name: pin-state + doc: | + defines possible states of a pin, valid values for + DPLL_A_PIN_STATE attribute + entries: + - + name: connected + doc: pin connected, active input of phase locked loop + value: 1 + - + name: disconnected + doc: pin disconnected, not considered as a valid input + - + name: selectable + doc: pin enabled for automatic input selection + render-max: true + - + type: flags + name: pin-capabilities + doc: | + defines possible capabilities of a pin, valid flags on + DPLL_A_PIN_CAPABILITIES attribute + entries: + - + name: direction-can-change + doc: pin direction can be changed + - + name: priority-can-change + doc: pin priority can be changed + - + name: state-can-change + doc: pin state can be changed + - + type: const + name: phase-offset-divider + value: 1000 + doc: | + phase offset divider allows userspace to calculate a value of + measured signal phase difference between a pin and dpll device + as a fractional value with three digit decimal precision. + Value of (DPLL_A_PHASE_OFFSET / DPLL_PHASE_OFFSET_DIVIDER) is an + integer part of a measured phase offset value. + Value of (DPLL_A_PHASE_OFFSET % DPLL_PHASE_OFFSET_DIVIDER) is a + fractional part of a measured phase offset value. + +attribute-sets: + - + name: dpll + enum-name: dpll_a + attributes: + - + name: id + type: u32 + - + name: module-name + type: string + - + name: pad + type: pad + - + name: clock-id + type: u64 + - + name: mode + type: u32 + enum: mode + - + name: mode-supported + type: u32 + enum: mode + multi-attr: true + - + name: lock-status + type: u32 + enum: lock-status + - + name: temp + type: s32 + - + name: type + type: u32 + enum: type + - + name: pin + enum-name: dpll_a_pin + attributes: + - + name: id + type: u32 + - + name: parent-id + type: u32 + - + name: module-name + type: string + - + name: pad + type: pad + - + name: clock-id + type: u64 + - + name: board-label + type: string + - + name: panel-label + type: string + - + name: package-label + type: string + - + name: type + type: u32 + enum: pin-type + - + name: direction + type: u32 + enum: pin-direction + - + name: frequency + type: u64 + - + name: frequency-supported + type: nest + multi-attr: true + nested-attributes: frequency-range + - + name: frequency-min + type: u64 + - + name: frequency-max + type: u64 + - + name: prio + type: u32 + - + name: state + type: u32 + enum: pin-state + - + name: capabilities + type: u32 + - + name: parent-device + type: nest + multi-attr: true + nested-attributes: pin-parent-device + - + name: parent-pin + type: nest + multi-attr: true + nested-attributes: pin-parent-pin + - + name: phase-adjust-min + type: s32 + - + name: phase-adjust-max + type: s32 + - + name: phase-adjust + type: s32 + - + name: phase-offset + type: s64 + - + name: pin-parent-device + subset-of: pin + attributes: + - + name: parent-id + - + name: direction + - + name: prio + - + name: state + - + name: phase-offset + - + name: pin-parent-pin + subset-of: pin + attributes: + - + name: parent-id + - + name: state + - + name: frequency-range + subset-of: pin + attributes: + - + name: frequency-min + - + name: frequency-max + +operations: + enum-name: dpll_cmd + list: + - + name: device-id-get + doc: | + Get id of dpll device that matches given attributes + attribute-set: dpll + flags: [ admin-perm ] + + do: + pre: dpll-lock-doit + post: dpll-unlock-doit + request: + attributes: + - module-name + - clock-id + - type + reply: + attributes: + - id + + - + name: device-get + doc: | + Get list of DPLL devices (dump) or attributes of a single dpll device + attribute-set: dpll + flags: [ admin-perm ] + + do: + pre: dpll-pre-doit + post: dpll-post-doit + request: + attributes: + - id + reply: &dev-attrs + attributes: + - id + - module-name + - mode + - mode-supported + - lock-status + - temp + - clock-id + - type + + dump: + reply: *dev-attrs + + - + name: device-set + doc: Set attributes for a DPLL device + attribute-set: dpll + flags: [ admin-perm ] + + do: + pre: dpll-pre-doit + post: dpll-post-doit + request: + attributes: + - id + - + name: device-create-ntf + doc: Notification about device appearing + notify: device-get + mcgrp: monitor + - + name: device-delete-ntf + doc: Notification about device disappearing + notify: device-get + mcgrp: monitor + - + name: device-change-ntf + doc: Notification about device configuration being changed + notify: device-get + mcgrp: monitor + - + name: pin-id-get + doc: | + Get id of a pin that matches given attributes + attribute-set: pin + flags: [ admin-perm ] + + do: + pre: dpll-lock-doit + post: dpll-unlock-doit + request: + attributes: + - module-name + - clock-id + - board-label + - panel-label + - package-label + - type + reply: + attributes: + - id + + - + name: pin-get + doc: | + Get list of pins and its attributes. + - dump request without any attributes given - list all the pins in the + system + - dump request with target dpll - list all the pins registered with + a given dpll device + - do request with target dpll and target pin - single pin attributes + attribute-set: pin + flags: [ admin-perm ] + + do: + pre: dpll-pin-pre-doit + post: dpll-pin-post-doit + request: + attributes: + - id + reply: &pin-attrs + attributes: + - id + - board-label + - panel-label + - package-label + - type + - frequency + - frequency-supported + - capabilities + - parent-device + - parent-pin + - phase-adjust-min + - phase-adjust-max + - phase-adjust + + dump: + request: + attributes: + - id + reply: *pin-attrs + + - + name: pin-set + doc: Set attributes of a target pin + attribute-set: pin + flags: [ admin-perm ] + + do: + pre: dpll-pin-pre-doit + post: dpll-pin-post-doit + request: + attributes: + - id + - frequency + - direction + - prio + - state + - parent-device + - parent-pin + - phase-adjust + - + name: pin-create-ntf + doc: Notification about pin appearing + notify: pin-get + mcgrp: monitor + - + name: pin-delete-ntf + doc: Notification about pin disappearing + notify: pin-get + mcgrp: monitor + - + name: pin-change-ntf + doc: Notification about pin configuration being changed + notify: pin-get + mcgrp: monitor + +mcast-groups: + list: + - + name: monitor |