diff options
Diffstat (limited to 'Documentation/netlink/specs')
-rw-r--r-- | Documentation/netlink/specs/devlink.yaml | 1562 | ||||
-rw-r--r-- | Documentation/netlink/specs/dpll.yaml | 506 | ||||
-rw-r--r-- | Documentation/netlink/specs/ethtool.yaml | 3 | ||||
-rw-r--r-- | Documentation/netlink/specs/handshake.yaml | 8 | ||||
-rw-r--r-- | Documentation/netlink/specs/mptcp.yaml | 393 | ||||
-rw-r--r-- | Documentation/netlink/specs/netdev.yaml | 21 | ||||
-rw-r--r-- | Documentation/netlink/specs/nfsd.yaml | 89 |
7 files changed, 2485 insertions, 97 deletions
diff --git a/Documentation/netlink/specs/devlink.yaml b/Documentation/netlink/specs/devlink.yaml index 065661acb8..572d83a414 100644 --- a/Documentation/netlink/specs/devlink.yaml +++ b/Documentation/netlink/specs/devlink.yaml @@ -15,6 +15,165 @@ definitions: name: ingress - name: egress + - + type: enum + name: port-type + entries: + - + name: notset + - + name: auto + - + name: eth + - + name: ib + - + type: enum + name: port-flavour + entries: + - + name: physical + - + name: cpu + - + name: dsa + - + name: pci_pf + - + name: pci_vf + - + name: virtual + - + name: unused + - + name: pci_sf + - + type: enum + name: port-fn-state + entries: + - + name: inactive + - + name: active + - + type: enum + name: port-fn-opstate + entries: + - + name: detached + - + name: attached + - + type: enum + name: port-fn-attr-cap + entries: + - + name: roce-bit + - + name: migratable-bit + - + name: ipsec-crypto-bit + - + name: ipsec-packet-bit + - + type: enum + name: sb-threshold-type + entries: + - + name: static + - + name: dynamic + - + type: enum + name: eswitch-mode + entries: + - + name: legacy + - + name: switchdev + - + type: enum + name: eswitch-inline-mode + entries: + - + name: none + - + name: link + - + name: network + - + name: transport + - + type: enum + name: eswitch-encap-mode + entries: + - + name: none + - + name: basic + - + type: enum + name: dpipe-match-type + entries: + - + name: field-exact + - + type: enum + name: dpipe-action-type + entries: + - + name: field-modify + - + type: enum + name: dpipe-field-mapping-type + entries: + - + name: none + - + name: ifindex + - + type: enum + name: resource-unit + entries: + - + name: entry + - + type: enum + name: reload-action + entries: + - + name: driver-reinit + value: 1 + - + name: fw-activate + - + type: enum + name: param-cmode + entries: + - + name: runtime + - + name: driverinit + - + name: permanent + - + type: enum + name: flash-overwrite + entries: + - + name: settings-bit + - + name: identifiers-bit + - + type: enum + name: trap-action + entries: + - + name: drop + - + name: trap + - + name: mirror attribute-sets: - @@ -31,6 +190,17 @@ attribute-sets: - name: port-index type: u32 + - + name: port-type + type: u16 + enum: port-type + + # TODO: fill in the attributes in between + + - + name: port-split-count + type: u32 + value: 9 # TODO: fill in the attributes in between @@ -45,18 +215,224 @@ attribute-sets: name: sb-pool-index type: u16 value: 17 - - name: sb-pool-type type: u8 enum: sb-pool-type + - + name: sb-pool-size + type: u32 + - + name: sb-pool-threshold-type + type: u8 + enum: sb-threshold-type + - + name: sb-threshold + type: u32 + - + name: sb-tc-index + type: u16 + value: 22 # TODO: fill in the attributes in between - - name: sb-tc-index + name: eswitch-mode type: u16 - value: 22 + value: 25 + enum: eswitch-mode + + - + name: eswitch-inline-mode + type: u16 + enum: eswitch-inline-mode + - + name: dpipe-tables + type: nest + nested-attributes: dl-dpipe-tables + - + name: dpipe-table + type: nest + multi-attr: true + nested-attributes: dl-dpipe-table + - + name: dpipe-table-name + type: string + - + name: dpipe-table-size + type: u64 + - + name: dpipe-table-matches + type: nest + nested-attributes: dl-dpipe-table-matches + - + name: dpipe-table-actions + type: nest + nested-attributes: dl-dpipe-table-actions + - + name: dpipe-table-counters-enabled + type: u8 + - + name: dpipe-entries + type: nest + nested-attributes: dl-dpipe-entries + - + name: dpipe-entry + type: nest + multi-attr: true + nested-attributes: dl-dpipe-entry + - + name: dpipe-entry-index + type: u64 + - + name: dpipe-entry-match-values + type: nest + nested-attributes: dl-dpipe-entry-match-values + - + name: dpipe-entry-action-values + type: nest + nested-attributes: dl-dpipe-entry-action-values + - + name: dpipe-entry-counter + type: u64 + - + name: dpipe-match + type: nest + multi-attr: true + nested-attributes: dl-dpipe-match + - + name: dpipe-match-value + type: nest + multi-attr: true + nested-attributes: dl-dpipe-match-value + - + name: dpipe-match-type + type: u32 + enum: dpipe-match-type + - + name: dpipe-action + type: nest + multi-attr: true + nested-attributes: dl-dpipe-action + - + name: dpipe-action-value + type: nest + multi-attr: true + nested-attributes: dl-dpipe-action-value + - + name: dpipe-action-type + type: u32 + enum: dpipe-action-type + - + name: dpipe-value + type: binary + - + name: dpipe-value-mask + type: binary + - + name: dpipe-value-mapping + type: u32 + - + name: dpipe-headers + type: nest + nested-attributes: dl-dpipe-headers + - + name: dpipe-header + type: nest + multi-attr: true + nested-attributes: dl-dpipe-header + - + name: dpipe-header-name + type: string + - + name: dpipe-header-id + type: u32 + - + name: dpipe-header-fields + type: nest + nested-attributes: dl-dpipe-header-fields + - + name: dpipe-header-global + type: u8 + - + name: dpipe-header-index + type: u32 + - + name: dpipe-field + type: nest + multi-attr: true + nested-attributes: dl-dpipe-field + - + name: dpipe-field-name + type: string + - + name: dpipe-field-id + type: u32 + - + name: dpipe-field-bitwidth + type: u32 + - + name: dpipe-field-mapping-type + type: u32 + enum: dpipe-field-mapping-type + - + name: pad + type: pad + - + name: eswitch-encap-mode + type: u8 + value: 62 + enum: eswitch-encap-mode + - + name: resource-list + type: nest + nested-attributes: dl-resource-list + - + name: resource + type: nest + multi-attr: true + nested-attributes: dl-resource + - + name: resource-name + type: string + - + name: resource-id + type: u64 + - + name: resource-size + type: u64 + - + name: resource-size-new + type: u64 + - + name: resource-size-valid + type: u8 + - + name: resource-size-min + type: u64 + - + name: resource-size-max + type: u64 + - + name: resource-size-gran + type: u64 + - + name: resource-unit + type: u8 + enum: resource-unit + - + name: resource-occ + type: u64 + - + name: dpipe-table-resource-id + type: u64 + - + name: dpipe-table-resource-units + type: u64 + - + name: port-flavour + type: u16 + enum: port-flavour # TODO: fill in the attributes in between @@ -68,16 +444,40 @@ attribute-sets: # TODO: fill in the attributes in between - + name: param-type + type: u8 + value: 83 + + # TODO: fill in the attributes in between + + - + name: param-value-cmode + type: u8 + enum: param-cmode + value: 87 + - name: region-name type: string - value: 88 # TODO: fill in the attributes in between - + name: region-snapshot-id + type: u32 + value: 92 + + # TODO: fill in the attributes in between + + - + name: region-chunk-addr + type: u64 + value: 96 + - + name: region-chunk-len + type: u64 + - name: info-driver-name type: string - value: 98 - name: info-serial-number type: string @@ -106,6 +506,29 @@ attribute-sets: # TODO: fill in the attributes in between - + name: fmsg + type: nest + nested-attributes: dl-fmsg + value: 106 + - + name: fmsg-obj-nest-start + type: flag + - + name: fmsg-pair-nest-start + type: flag + - + name: fmsg-arr-nest-start + type: flag + - + name: fmsg-nest-end + type: flag + - + name: fmsg-obj-name + type: string + + # TODO: fill in the attributes in between + + - name: health-reporter-name type: string value: 115 @@ -113,9 +536,36 @@ attribute-sets: # TODO: fill in the attributes in between - + name: health-reporter-graceful-period + type: u64 + value: 120 + - + name: health-reporter-auto-recover + type: u8 + - + name: flash-update-file-name + type: string + - + name: flash-update-component + type: string + + # TODO: fill in the attributes in between + + - + name: port-pci-pf-number + type: u16 + value: 127 + + # TODO: fill in the attributes in between + + - name: trap-name type: string value: 130 + - + name: trap-action + type: u8 + enum: trap-action # TODO: fill in the attributes in between @@ -131,23 +581,68 @@ attribute-sets: # TODO: fill in the attributes in between - - name: trap-policer-id + name: netns-fd + type: u32 + value: 138 + - + name: netns-pid + type: u32 + - + name: netns-id type: u32 - value: 142 # TODO: fill in the attributes in between - - name: reload-action + name: health-reporter-auto-dump type: u8 - value: 153 + value: 141 + - + name: trap-policer-id + type: u32 + - + name: trap-policer-rate + type: u64 + - + name: trap-policer-burst + type: u64 + - + name: port-function + type: nest + nested-attributes: dl-port-function + + # TODO: fill in the attributes in between + + - + name: port-controller-number + type: u32 + value: 150 # TODO: fill in the attributes in between - + name: flash-update-overwrite-mask + type: bitfield32 + enum: flash-overwrite + enum-as-flags: True + value: 152 + - + name: reload-action + type: u8 + enum: reload-action + - + name: reload-actions-performed + type: bitfield32 + enum: reload-action + enum-as-flags: True + - + name: reload-limits + type: bitfield32 + enum: reload-action + enum-as-flags: True + - name: dev-stats type: nest - value: 156 nested-attributes: dl-dev-stats - name: reload-stats @@ -182,9 +677,25 @@ attribute-sets: # TODO: fill in the attributes in between - + name: port-pci-sf-number + type: u32 + value: 164 + + # TODO: fill in the attributes in between + + - + name: rate-tx-share + type: u64 + value: 166 + - + name: rate-tx-max + type: u64 + - name: rate-node-name type: string - value: 168 + - + name: rate-parent-node-name + type: string # TODO: fill in the attributes in between @@ -193,60 +704,329 @@ attribute-sets: type: u32 value: 171 + # TODO: fill in the attributes in between + + - + name: linecard-type + type: string + value: 173 + + # TODO: fill in the attributes in between + + - + name: selftests + type: nest + value: 176 + nested-attributes: dl-selftest-id + - + name: rate-tx-priority + type: u32 + - + name: rate-tx-weight + type: u32 + - + name: region-direct + type: flag + - name: dl-dev-stats subset-of: devlink attributes: - name: reload-stats - type: nest - name: remote-reload-stats - type: nest - name: dl-reload-stats subset-of: devlink attributes: - name: reload-action-info - type: nest - name: dl-reload-act-info subset-of: devlink attributes: - name: reload-action - type: u8 - name: reload-action-stats - type: nest - name: dl-reload-act-stats subset-of: devlink attributes: - name: reload-stats-entry - type: nest - name: dl-reload-stats-entry subset-of: devlink attributes: - name: reload-stats-limit - type: u8 - name: reload-stats-value - type: u32 - name: dl-info-version subset-of: devlink attributes: - name: info-version-name - type: string - name: info-version-value - type: string + - + name: dl-port-function + name-prefix: devlink-port-fn-attr- + attr-max-name: devlink-port-function-attr-max + attributes: + - + name-prefix: devlink-port-function-attr- + name: hw-addr + type: binary + value: 1 + - + name: state + type: u8 + enum: port-fn-state + - + name: opstate + type: u8 + enum: port-fn-opstate + - + name: caps + type: bitfield32 + enum: port-fn-attr-cap + enum-as-flags: True + + - + name: dl-dpipe-tables + subset-of: devlink + attributes: + - + name: dpipe-table + + - + name: dl-dpipe-table + subset-of: devlink + attributes: + - + name: dpipe-table-name + - + name: dpipe-table-size + - + name: dpipe-table-name + - + name: dpipe-table-size + - + name: dpipe-table-matches + - + name: dpipe-table-actions + - + name: dpipe-table-counters-enabled + - + name: dpipe-table-resource-id + - + name: dpipe-table-resource-units + + - + name: dl-dpipe-table-matches + subset-of: devlink + attributes: + - + name: dpipe-match + + - + name: dl-dpipe-table-actions + subset-of: devlink + attributes: + - + name: dpipe-action + + - + name: dl-dpipe-entries + subset-of: devlink + attributes: + - + name: dpipe-entry + + - + name: dl-dpipe-entry + subset-of: devlink + attributes: + - + name: dpipe-entry-index + - + name: dpipe-entry-match-values + - + name: dpipe-entry-action-values + - + name: dpipe-entry-counter + + - + name: dl-dpipe-entry-match-values + subset-of: devlink + attributes: + - + name: dpipe-match-value + + - + name: dl-dpipe-entry-action-values + subset-of: devlink + attributes: + - + name: dpipe-action-value + + - + name: dl-dpipe-match + subset-of: devlink + attributes: + - + name: dpipe-match-type + - + name: dpipe-header-id + - + name: dpipe-header-global + - + name: dpipe-header-index + - + name: dpipe-field-id + + - + name: dl-dpipe-match-value + subset-of: devlink + attributes: + - + name: dpipe-match + - + name: dpipe-value + - + name: dpipe-value-mask + - + name: dpipe-value-mapping + + - + name: dl-dpipe-action + subset-of: devlink + attributes: + - + name: dpipe-action-type + - + name: dpipe-header-id + - + name: dpipe-header-global + - + name: dpipe-header-index + - + name: dpipe-field-id + + - + name: dl-dpipe-action-value + subset-of: devlink + attributes: + - + name: dpipe-action + - + name: dpipe-value + - + name: dpipe-value-mask + - + name: dpipe-value-mapping + + - + name: dl-dpipe-headers + subset-of: devlink + attributes: + - + name: dpipe-header + + - + name: dl-dpipe-header + subset-of: devlink + attributes: + - + name: dpipe-header-name + - + name: dpipe-header-id + - + name: dpipe-header-global + - + name: dpipe-header-fields + + - + name: dl-dpipe-header-fields + subset-of: devlink + attributes: + - + name: dpipe-field + + - + name: dl-dpipe-field + subset-of: devlink + attributes: + - + name: dpipe-field-name + - + name: dpipe-field-id + - + name: dpipe-field-bitwidth + - + name: dpipe-field-mapping-type + + - + name: dl-resource + subset-of: devlink + attributes: + # - + # name: resource-list + # This is currently unsupported due to circular dependency + - + name: resource-name + - + name: resource-id + - + name: resource-size + - + name: resource-size-new + - + name: resource-size-valid + - + name: resource-size-min + - + name: resource-size-max + - + name: resource-size-gran + - + name: resource-unit + - + name: resource-occ + + - + name: dl-resource-list + subset-of: devlink + attributes: + - + name: resource + + - + name: dl-fmsg + subset-of: devlink + attributes: + - + name: fmsg-obj-nest-start + - + name: fmsg-pair-nest-start + - + name: fmsg-arr-nest-start + - + name: fmsg-nest-end + - + name: fmsg-obj-name + + - + name: dl-selftest-id + name-prefix: devlink-attr-selftest-id- + attributes: + - + name: flash + type: flag operations: enum-model: directional @@ -255,10 +1035,7 @@ operations: name: get doc: Get devlink instances. attribute-set: devlink - dont-validate: - - strict - - dump - + dont-validate: [ strict, dump ] do: pre: devlink-nl-pre-doit post: devlink-nl-post-doit @@ -273,7 +1050,6 @@ operations: - bus-name - dev-name - reload-failed - - reload-action - dev-stats dump: reply: *get-reply @@ -282,9 +1058,7 @@ operations: name: port-get doc: Get devlink port instances. attribute-set: devlink - dont-validate: - - strict - + dont-validate: [ strict ] do: pre: devlink-nl-pre-doit-port post: devlink-nl-post-doit @@ -303,16 +1077,90 @@ operations: reply: value: 3 # due to a bug, port dump returns DEVLINK_CMD_NEW attributes: *port-id-attrs + - + name: port-set + doc: Set devlink port instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit-port + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - port-index + - port-type + - port-function + + - + name: port-new + doc: Create devlink port instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - port-index + - port-flavour + - port-pci-pf-number + - port-pci-sf-number + - port-controller-number + reply: + value: 7 + attributes: *port-id-attrs - # TODO: fill in the operations in between + - + name: port-del + doc: Delete devlink port instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit-port + post: devlink-nl-post-doit + request: + attributes: *port-id-attrs + + - + name: port-split + doc: Split devlink port instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit-port + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - port-index + - port-split-count + + - + name: port-unsplit + doc: Unplit devlink port instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit-port + post: devlink-nl-post-doit + request: + attributes: *port-id-attrs - name: sb-get doc: Get shared buffer instances. attribute-set: devlink - dont-validate: - - strict - + dont-validate: [ strict ] do: pre: devlink-nl-pre-doit post: devlink-nl-post-doit @@ -330,15 +1178,11 @@ operations: attributes: *dev-id-attrs reply: *sb-get-reply - # TODO: fill in the operations in between - - name: sb-pool-get doc: Get shared buffer pool instances. attribute-set: devlink - dont-validate: - - strict - + dont-validate: [ strict ] do: pre: devlink-nl-pre-doit post: devlink-nl-post-doit @@ -357,15 +1201,29 @@ operations: attributes: *dev-id-attrs reply: *sb-pool-get-reply - # TODO: fill in the operations in between + - + name: sb-pool-set + doc: Set shared buffer pool instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - sb-index + - sb-pool-index + - sb-pool-threshold-type + - sb-pool-size - name: sb-port-pool-get doc: Get shared buffer port-pool combinations and threshold. attribute-set: devlink - dont-validate: - - strict - + dont-validate: [ strict ] do: pre: devlink-nl-pre-doit-port post: devlink-nl-post-doit @@ -385,15 +1243,29 @@ operations: attributes: *dev-id-attrs reply: *sb-port-pool-get-reply - # TODO: fill in the operations in between + - + name: sb-port-pool-set + doc: Set shared buffer port-pool combinations and threshold. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit-port + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - port-index + - sb-index + - sb-pool-index + - sb-threshold - name: sb-tc-pool-bind-get doc: Get shared buffer port-TC to pool bindings and threshold. attribute-set: devlink - dont-validate: - - strict - + dont-validate: [ strict ] do: pre: devlink-nl-pre-doit-port post: devlink-nl-post-doit @@ -414,41 +1286,264 @@ operations: attributes: *dev-id-attrs reply: *sb-tc-pool-bind-get-reply - # TODO: fill in the operations in between + - + name: sb-tc-pool-bind-set + doc: Set shared buffer port-TC to pool bindings and threshold. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit-port + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - port-index + - sb-index + - sb-pool-index + - sb-pool-type + - sb-tc-index + - sb-threshold + + - + name: sb-occ-snapshot + doc: Take occupancy snapshot of shared buffer. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + value: 27 + attributes: + - bus-name + - dev-name + - sb-index + + - + name: sb-occ-max-clear + doc: Clear occupancy watermarks of shared buffer. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - sb-index + + - + name: eswitch-get + doc: Get eswitch attributes. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: *dev-id-attrs + reply: + value: 29 + attributes: &eswitch-attrs + - bus-name + - dev-name + - eswitch-mode + - eswitch-inline-mode + - eswitch-encap-mode + + - + name: eswitch-set + doc: Set eswitch attributes. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: *eswitch-attrs + + - + name: dpipe-table-get + doc: Get dpipe table attributes. + attribute-set: devlink + dont-validate: [ strict ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - dpipe-table-name + reply: + value: 31 + attributes: + - bus-name + - dev-name + - dpipe-tables + + - + name: dpipe-entries-get + doc: Get dpipe entries attributes. + attribute-set: devlink + dont-validate: [ strict ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - dpipe-table-name + reply: + attributes: + - bus-name + - dev-name + - dpipe-entries + + - + name: dpipe-headers-get + doc: Get dpipe headers attributes. + attribute-set: devlink + dont-validate: [ strict ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + reply: + attributes: + - bus-name + - dev-name + - dpipe-headers + + - + name: dpipe-table-counters-set + doc: Set dpipe counter attributes. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - dpipe-table-name + - dpipe-table-counters-enabled + + - + name: resource-set + doc: Set resource attributes. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - resource-id + - resource-size + + - + name: resource-dump + doc: Get resource attributes. + attribute-set: devlink + dont-validate: [ strict ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + reply: + value: 36 + attributes: + - bus-name + - dev-name + - resource-list + + - + name: reload + doc: Reload devlink. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - reload-action + - reload-limits + - netns-pid + - netns-fd + - netns-id + reply: + attributes: + - bus-name + - dev-name + - reload-actions-performed - name: param-get doc: Get param instances. attribute-set: devlink - dont-validate: - - strict - + dont-validate: [ strict ] do: pre: devlink-nl-pre-doit post: devlink-nl-post-doit request: - value: 38 attributes: ¶m-id-attrs - bus-name - dev-name - param-name reply: ¶m-get-reply - value: 38 attributes: *param-id-attrs dump: request: attributes: *dev-id-attrs reply: *param-get-reply - # TODO: fill in the operations in between + - + name: param-set + doc: Set param instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - param-name + - param-type + # param-value-data is missing here as the type is variable + - param-value-cmode - name: region-get doc: Get region instances. attribute-set: devlink - dont-validate: - - strict - + dont-validate: [ strict ] do: pre: devlink-nl-pre-doit-port-optional post: devlink-nl-post-doit @@ -467,16 +1562,97 @@ operations: attributes: *dev-id-attrs reply: *region-get-reply - # TODO: fill in the operations in between + - + name: region-new + doc: Create region snapshot. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit-port-optional + post: devlink-nl-post-doit + request: + value: 44 + attributes: ®ion-snapshot-id-attrs + - bus-name + - dev-name + - port-index + - region-name + - region-snapshot-id + reply: + value: 44 + attributes: *region-snapshot-id-attrs + + - + name: region-del + doc: Delete region snapshot. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit-port-optional + post: devlink-nl-post-doit + request: + attributes: *region-snapshot-id-attrs + + - + name: region-read + doc: Read region data. + attribute-set: devlink + dont-validate: [ dump-strict ] + flags: [ admin-perm ] + dump: + request: + attributes: + - bus-name + - dev-name + - port-index + - region-name + - region-snapshot-id + - region-direct + - region-chunk-addr + - region-chunk-len + reply: + value: 46 + attributes: + - bus-name + - dev-name + - port-index + - region-name + + - + name: port-param-get + doc: Get port param instances. + attribute-set: devlink + dont-validate: [ strict, dump-strict ] + do: + pre: devlink-nl-pre-doit-port + post: devlink-nl-post-doit + request: + attributes: *port-id-attrs + reply: + attributes: *port-id-attrs + dump: + reply: + attributes: *port-id-attrs + + - + name: port-param-set + doc: Set port param instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit-port + post: devlink-nl-post-doit + request: + attributes: *port-id-attrs - name: info-get doc: Get device information, like driver name, hardware and firmware versions etc. attribute-set: devlink - dont-validate: - - strict - - dump - + dont-validate: [ strict, dump ] do: pre: devlink-nl-pre-doit post: devlink-nl-post-doit @@ -500,9 +1676,7 @@ operations: name: health-reporter-get doc: Get health reporter instances. attribute-set: devlink - dont-validate: - - strict - + dont-validate: [ strict ] do: pre: devlink-nl-pre-doit-port-optional post: devlink-nl-post-doit @@ -519,15 +1693,97 @@ operations: attributes: *port-id-attrs reply: *health-reporter-get-reply - # TODO: fill in the operations in between + - + name: health-reporter-set + doc: Set health reporter instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit-port-optional + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - port-index + - health-reporter-name + - health-reporter-graceful-period + - health-reporter-auto-recover + - health-reporter-auto-dump + + - + name: health-reporter-recover + doc: Recover health reporter instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit-port-optional + post: devlink-nl-post-doit + request: + attributes: *health-reporter-id-attrs + + - + name: health-reporter-diagnose + doc: Diagnose health reporter instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit-port-optional + post: devlink-nl-post-doit + request: + attributes: *health-reporter-id-attrs + + - + name: health-reporter-dump-get + doc: Dump health reporter instances. + attribute-set: devlink + dont-validate: [ dump-strict ] + flags: [ admin-perm ] + dump: + request: + attributes: *health-reporter-id-attrs + reply: + value: 56 + attributes: + - fmsg + + - + name: health-reporter-dump-clear + doc: Clear dump of health reporter instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit-port-optional + post: devlink-nl-post-doit + request: + attributes: *health-reporter-id-attrs + + - + name: flash-update + doc: Flash update devlink instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - flash-update-file-name + - flash-update-component + - flash-update-overwrite-mask - name: trap-get doc: Get trap instances. attribute-set: devlink - dont-validate: - - strict - + dont-validate: [ strict ] do: pre: devlink-nl-pre-doit post: devlink-nl-post-doit @@ -545,15 +1801,27 @@ operations: attributes: *dev-id-attrs reply: *trap-get-reply - # TODO: fill in the operations in between + - + name: trap-set + doc: Set trap instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - trap-name + - trap-action - name: trap-group-get doc: Get trap group instances. attribute-set: devlink - dont-validate: - - strict - + dont-validate: [ strict ] do: pre: devlink-nl-pre-doit post: devlink-nl-post-doit @@ -571,15 +1839,28 @@ operations: attributes: *dev-id-attrs reply: *trap-group-get-reply - # TODO: fill in the operations in between + - + name: trap-group-set + doc: Set trap group instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - trap-group-name + - trap-action + - trap-policer-id - name: trap-policer-get doc: Get trap policer instances. attribute-set: devlink - dont-validate: - - strict - + dont-validate: [ strict ] do: pre: devlink-nl-pre-doit post: devlink-nl-post-doit @@ -597,15 +1878,41 @@ operations: attributes: *dev-id-attrs reply: *trap-policer-get-reply - # TODO: fill in the operations in between + - + name: trap-policer-set + doc: Get trap policer instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - trap-policer-id + - trap-policer-rate + - trap-policer-burst + + - + name: health-reporter-test + doc: Test health reporter instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit-port-optional + post: devlink-nl-post-doit + request: + value: 73 + attributes: *health-reporter-id-attrs - name: rate-get doc: Get rate instances. attribute-set: devlink - dont-validate: - - strict - + dont-validate: [ strict ] do: pre: devlink-nl-pre-doit post: devlink-nl-post-doit @@ -624,15 +1931,66 @@ operations: attributes: *dev-id-attrs reply: *rate-get-reply - # TODO: fill in the operations in between + - + name: rate-set + doc: Set rate instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - rate-node-name + - rate-tx-share + - rate-tx-max + - rate-tx-priority + - rate-tx-weight + - rate-parent-node-name + + - + name: rate-new + doc: Create rate instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - rate-node-name + - rate-tx-share + - rate-tx-max + - rate-tx-priority + - rate-tx-weight + - rate-parent-node-name + + - + name: rate-del + doc: Delete rate instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - rate-node-name - name: linecard-get doc: Get line card instances. attribute-set: devlink - dont-validate: - - strict - + dont-validate: [ strict ] do: pre: devlink-nl-pre-doit post: devlink-nl-post-doit @@ -650,16 +2008,27 @@ operations: attributes: *dev-id-attrs reply: *linecard-get-reply - # TODO: fill in the operations in between + - + name: linecard-set + doc: Set line card instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - linecard-index + - linecard-type - name: selftests-get doc: Get device selftest instances. attribute-set: devlink - dont-validate: - - strict - - dump - + dont-validate: [ strict, dump ] do: pre: devlink-nl-pre-doit post: devlink-nl-post-doit @@ -671,3 +2040,18 @@ operations: attributes: *dev-id-attrs dump: reply: *selftests-get-reply + + - + name: selftests-run + doc: Run device selftest instances. + attribute-set: devlink + dont-validate: [ strict ] + flags: [ admin-perm ] + do: + pre: devlink-nl-pre-doit + post: devlink-nl-post-doit + request: + attributes: + - bus-name + - dev-name + - selftests diff --git a/Documentation/netlink/specs/dpll.yaml b/Documentation/netlink/specs/dpll.yaml new file mode 100644 index 0000000000..2b4c4bcd83 --- /dev/null +++ b/Documentation/netlink/specs/dpll.yaml @@ -0,0 +1,506 @@ +# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) + +name: dpll + +doc: DPLL subsystem. + +definitions: + - + type: enum + name: mode + doc: | + working modes a dpll can support, differentiates if and how dpll selects + one of its inputs to syntonize with it, valid values for DPLL_A_MODE + attribute + entries: + - + name: manual + doc: input can be only selected by sending a request to dpll + value: 1 + - + name: automatic + doc: highest prio input pin auto selected by dpll + render-max: true + - + type: enum + name: lock-status + doc: | + provides information of dpll device lock status, valid values for + DPLL_A_LOCK_STATUS attribute + entries: + - + name: unlocked + doc: | + dpll was not yet locked to any valid input (or forced by setting + DPLL_A_MODE to DPLL_MODE_DETACHED) + value: 1 + - + name: locked + doc: | + dpll is locked to a valid signal, but no holdover available + - + name: locked-ho-acq + doc: | + dpll is locked and holdover acquired + - + name: holdover + doc: | + dpll is in holdover state - lost a valid lock or was forced + by disconnecting all the pins (latter possible only + when dpll lock-state was already DPLL_LOCK_STATUS_LOCKED_HO_ACQ, + if dpll lock-state was not DPLL_LOCK_STATUS_LOCKED_HO_ACQ, the + dpll's lock-state shall remain DPLL_LOCK_STATUS_UNLOCKED) + render-max: true + - + type: const + name: temp-divider + value: 1000 + doc: | + temperature divider allowing userspace to calculate the + temperature as float with three digit decimal precision. + Value of (DPLL_A_TEMP / DPLL_TEMP_DIVIDER) is integer part of + temperature value. + Value of (DPLL_A_TEMP % DPLL_TEMP_DIVIDER) is fractional part of + temperature value. + - + type: enum + name: type + doc: type of dpll, valid values for DPLL_A_TYPE attribute + entries: + - + name: pps + doc: dpll produces Pulse-Per-Second signal + value: 1 + - + name: eec + doc: dpll drives the Ethernet Equipment Clock + render-max: true + - + type: enum + name: pin-type + doc: | + defines possible types of a pin, valid values for DPLL_A_PIN_TYPE + attribute + entries: + - + name: mux + doc: aggregates another layer of selectable pins + value: 1 + - + name: ext + doc: external input + - + name: synce-eth-port + doc: ethernet port PHY's recovered clock + - + name: int-oscillator + doc: device internal oscillator + - + name: gnss + doc: GNSS recovered clock + render-max: true + - + type: enum + name: pin-direction + doc: | + defines possible direction of a pin, valid values for + DPLL_A_PIN_DIRECTION attribute + entries: + - + name: input + doc: pin used as a input of a signal + value: 1 + - + name: output + doc: pin used to output the signal + render-max: true + - + type: const + name: pin-frequency-1-hz + value: 1 + - + type: const + name: pin-frequency-10-khz + value: 10000 + - + type: const + name: pin-frequency-77_5-khz + value: 77500 + - + type: const + name: pin-frequency-10-mhz + value: 10000000 + - + type: enum + name: pin-state + doc: | + defines possible states of a pin, valid values for + DPLL_A_PIN_STATE attribute + entries: + - + name: connected + doc: pin connected, active input of phase locked loop + value: 1 + - + name: disconnected + doc: pin disconnected, not considered as a valid input + - + name: selectable + doc: pin enabled for automatic input selection + render-max: true + - + type: flags + name: pin-capabilities + doc: | + defines possible capabilities of a pin, valid flags on + DPLL_A_PIN_CAPABILITIES attribute + entries: + - + name: direction-can-change + doc: pin direction can be changed + - + name: priority-can-change + doc: pin priority can be changed + - + name: state-can-change + doc: pin state can be changed + - + type: const + name: phase-offset-divider + value: 1000 + doc: | + phase offset divider allows userspace to calculate a value of + measured signal phase difference between a pin and dpll device + as a fractional value with three digit decimal precision. + Value of (DPLL_A_PHASE_OFFSET / DPLL_PHASE_OFFSET_DIVIDER) is an + integer part of a measured phase offset value. + Value of (DPLL_A_PHASE_OFFSET % DPLL_PHASE_OFFSET_DIVIDER) is a + fractional part of a measured phase offset value. + +attribute-sets: + - + name: dpll + enum-name: dpll_a + attributes: + - + name: id + type: u32 + - + name: module-name + type: string + - + name: pad + type: pad + - + name: clock-id + type: u64 + - + name: mode + type: u32 + enum: mode + - + name: mode-supported + type: u32 + enum: mode + multi-attr: true + - + name: lock-status + type: u32 + enum: lock-status + - + name: temp + type: s32 + - + name: type + type: u32 + enum: type + - + name: pin + enum-name: dpll_a_pin + attributes: + - + name: id + type: u32 + - + name: parent-id + type: u32 + - + name: module-name + type: string + - + name: pad + type: pad + - + name: clock-id + type: u64 + - + name: board-label + type: string + - + name: panel-label + type: string + - + name: package-label + type: string + - + name: type + type: u32 + enum: pin-type + - + name: direction + type: u32 + enum: pin-direction + - + name: frequency + type: u64 + - + name: frequency-supported + type: nest + multi-attr: true + nested-attributes: frequency-range + - + name: frequency-min + type: u64 + - + name: frequency-max + type: u64 + - + name: prio + type: u32 + - + name: state + type: u32 + enum: pin-state + - + name: capabilities + type: u32 + - + name: parent-device + type: nest + multi-attr: true + nested-attributes: pin-parent-device + - + name: parent-pin + type: nest + multi-attr: true + nested-attributes: pin-parent-pin + - + name: phase-adjust-min + type: s32 + - + name: phase-adjust-max + type: s32 + - + name: phase-adjust + type: s32 + - + name: phase-offset + type: s64 + - + name: pin-parent-device + subset-of: pin + attributes: + - + name: parent-id + - + name: direction + - + name: prio + - + name: state + - + name: phase-offset + - + name: pin-parent-pin + subset-of: pin + attributes: + - + name: parent-id + - + name: state + - + name: frequency-range + subset-of: pin + attributes: + - + name: frequency-min + - + name: frequency-max + +operations: + enum-name: dpll_cmd + list: + - + name: device-id-get + doc: | + Get id of dpll device that matches given attributes + attribute-set: dpll + flags: [ admin-perm ] + + do: + pre: dpll-lock-doit + post: dpll-unlock-doit + request: + attributes: + - module-name + - clock-id + - type + reply: + attributes: + - id + + - + name: device-get + doc: | + Get list of DPLL devices (dump) or attributes of a single dpll device + attribute-set: dpll + flags: [ admin-perm ] + + do: + pre: dpll-pre-doit + post: dpll-post-doit + request: + attributes: + - id + reply: &dev-attrs + attributes: + - id + - module-name + - mode + - mode-supported + - lock-status + - temp + - clock-id + - type + + dump: + reply: *dev-attrs + + - + name: device-set + doc: Set attributes for a DPLL device + attribute-set: dpll + flags: [ admin-perm ] + + do: + pre: dpll-pre-doit + post: dpll-post-doit + request: + attributes: + - id + - + name: device-create-ntf + doc: Notification about device appearing + notify: device-get + mcgrp: monitor + - + name: device-delete-ntf + doc: Notification about device disappearing + notify: device-get + mcgrp: monitor + - + name: device-change-ntf + doc: Notification about device configuration being changed + notify: device-get + mcgrp: monitor + - + name: pin-id-get + doc: | + Get id of a pin that matches given attributes + attribute-set: pin + flags: [ admin-perm ] + + do: + pre: dpll-lock-doit + post: dpll-unlock-doit + request: + attributes: + - module-name + - clock-id + - board-label + - panel-label + - package-label + - type + reply: + attributes: + - id + + - + name: pin-get + doc: | + Get list of pins and its attributes. + - dump request without any attributes given - list all the pins in the + system + - dump request with target dpll - list all the pins registered with + a given dpll device + - do request with target dpll and target pin - single pin attributes + attribute-set: pin + flags: [ admin-perm ] + + do: + pre: dpll-pin-pre-doit + post: dpll-pin-post-doit + request: + attributes: + - id + reply: &pin-attrs + attributes: + - id + - board-label + - panel-label + - package-label + - type + - frequency + - frequency-supported + - capabilities + - parent-device + - parent-pin + - phase-adjust-min + - phase-adjust-max + - phase-adjust + + dump: + request: + attributes: + - id + reply: *pin-attrs + + - + name: pin-set + doc: Set attributes of a target pin + attribute-set: pin + flags: [ admin-perm ] + + do: + pre: dpll-pin-pre-doit + post: dpll-pin-post-doit + request: + attributes: + - id + - frequency + - direction + - prio + - state + - parent-device + - parent-pin + - phase-adjust + - + name: pin-create-ntf + doc: Notification about pin appearing + notify: pin-get + mcgrp: monitor + - + name: pin-delete-ntf + doc: Notification about pin disappearing + notify: pin-get + mcgrp: monitor + - + name: pin-change-ntf + doc: Notification about pin configuration being changed + notify: pin-get + mcgrp: monitor + +mcast-groups: + list: + - + name: monitor diff --git a/Documentation/netlink/specs/ethtool.yaml b/Documentation/netlink/specs/ethtool.yaml index 837b565577..5c7a65b009 100644 --- a/Documentation/netlink/specs/ethtool.yaml +++ b/Documentation/netlink/specs/ethtool.yaml @@ -818,13 +818,10 @@ attribute-sets: attributes: - name: hist-bkt-low - type: u32 - name: hist-bkt-hi - type: u32 - name: hist-val - type: u64 - name: stats attributes: diff --git a/Documentation/netlink/specs/handshake.yaml b/Documentation/netlink/specs/handshake.yaml index 6d89e30f5f..b934cc513e 100644 --- a/Documentation/netlink/specs/handshake.yaml +++ b/Documentation/netlink/specs/handshake.yaml @@ -34,16 +34,16 @@ attribute-sets: attributes: - name: cert - type: u32 + type: s32 - name: privkey - type: u32 + type: s32 - name: accept attributes: - name: sockfd - type: u32 + type: s32 - name: handler-class type: u32 @@ -79,7 +79,7 @@ attribute-sets: type: u32 - name: sockfd - type: u32 + type: s32 - name: remote-auth type: u32 diff --git a/Documentation/netlink/specs/mptcp.yaml b/Documentation/netlink/specs/mptcp.yaml new file mode 100644 index 0000000000..49f90cfb46 --- /dev/null +++ b/Documentation/netlink/specs/mptcp.yaml @@ -0,0 +1,393 @@ +# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) + +name: mptcp_pm +protocol: genetlink-legacy +doc: Multipath TCP. + +c-family-name: mptcp-pm-name +c-version-name: mptcp-pm-ver +max-by-define: true +kernel-policy: per-op +cmd-cnt-name: --mptcp-pm-cmd-after-last + +definitions: + - + type: enum + name: event-type + enum-name: mptcp-event-type + name-prefix: mptcp-event- + entries: + - + name: unspec + doc: unused event + - + name: created + doc: + token, family, saddr4 | saddr6, daddr4 | daddr6, sport, dport + A new MPTCP connection has been created. It is the good time to + allocate memory and send ADD_ADDR if needed. Depending on the + traffic-patterns it can take a long time until the + MPTCP_EVENT_ESTABLISHED is sent. + - + name: established + doc: + token, family, saddr4 | saddr6, daddr4 | daddr6, sport, dport + A MPTCP connection is established (can start new subflows). + - + name: closed + doc: + token + A MPTCP connection has stopped. + - + name: announced + value: 6 + doc: + token, rem_id, family, daddr4 | daddr6 [, dport] + A new address has been announced by the peer. + - + name: removed + doc: + token, rem_id + An address has been lost by the peer. + - + name: sub-established + value: 10 + doc: + token, family, loc_id, rem_id, saddr4 | saddr6, daddr4 | daddr6, sport, + dport, backup, if_idx [, error] + A new subflow has been established. 'error' should not be set. + - + name: sub-closed + doc: + token, family, loc_id, rem_id, saddr4 | saddr6, daddr4 | daddr6, sport, + dport, backup, if_idx [, error] + A subflow has been closed. An error (copy of sk_err) could be set if an + error has been detected for this subflow. + - + name: sub-priority + value: 13 + doc: + token, family, loc_id, rem_id, saddr4 | saddr6, daddr4 | daddr6, sport, + dport, backup, if_idx [, error] + The priority of a subflow has changed. 'error' should not be set. + - + name: listener-created + value: 15 + doc: + family, sport, saddr4 | saddr6 + A new PM listener is created. + - + name: listener-closed + doc: + family, sport, saddr4 | saddr6 + A PM listener is closed. + +attribute-sets: + - + name: address + name-prefix: mptcp-pm-addr-attr- + attributes: + - + name: unspec + type: unused + value: 0 + - + name: family + type: u16 + - + name: id + type: u8 + - + name: addr4 + type: u32 + byte-order: big-endian + - + name: addr6 + type: binary + checks: + exact-len: 16 + - + name: port + type: u16 + byte-order: big-endian + - + name: flags + type: u32 + - + name: if-idx + type: s32 + - + name: subflow-attribute + name-prefix: mptcp-subflow-attr- + attributes: + - + name: unspec + type: unused + value: 0 + - + name: token-rem + type: u32 + - + name: token-loc + type: u32 + - + name: relwrite-seq + type: u32 + - + name: map-seq + type: u64 + - + name: map-sfseq + type: u32 + - + name: ssn-offset + type: u32 + - + name: map-datalen + type: u16 + - + name: flags + type: u32 + - + name: id-rem + type: u8 + - + name: id-loc + type: u8 + - + name: pad + type: pad + - + name: endpoint + name-prefix: mptcp-pm-endpoint- + attributes: + - + name: addr + type: nest + nested-attributes: address + - + name: attr + name-prefix: mptcp-pm-attr- + attr-cnt-name: --mptcp-attr-after-last + attributes: + - + name: unspec + type: unused + value: 0 + - + name: addr + type: nest + nested-attributes: address + - + name: rcv-add-addrs + type: u32 + - + name: subflows + type: u32 + - + name: token + type: u32 + - + name: loc-id + type: u8 + - + name: addr-remote + type: nest + nested-attributes: address + - + name: event-attr + enum-name: mptcp-event-attr + name-prefix: mptcp-attr- + attributes: + - + name: unspec + type: unused + value: 0 + - + name: token + type: u32 + - + name: family + type: u16 + - + name: loc-id + type: u8 + - + name: rem-id + type: u8 + - + name: saddr4 + type: u32 + byte-order: big-endian + - + name: saddr6 + type: binary + checks: + min-len: 16 + - + name: daddr4 + type: u32 + byte-order: big-endian + - + name: daddr6 + type: binary + checks: + min-len: 16 + - + name: sport + type: u16 + byte-order: big-endian + - + name: dport + type: u16 + byte-order: big-endian + - + name: backup + type: u8 + - + name: error + type: u8 + - + name: flags + type: u16 + - + name: timeout + type: u32 + - + name: if_idx + type: u32 + - + name: reset-reason + type: u32 + - + name: reset-flags + type: u32 + - + name: server-side + type: u8 + +operations: + list: + - + name: unspec + doc: unused + value: 0 + - + name: add-addr + doc: Add endpoint + attribute-set: endpoint + dont-validate: [ strict ] + flags: [ uns-admin-perm ] + do: &add-addr-attrs + request: + attributes: + - addr + - + name: del-addr + doc: Delete endpoint + attribute-set: endpoint + dont-validate: [ strict ] + flags: [ uns-admin-perm ] + do: *add-addr-attrs + - + name: get-addr + doc: Get endpoint information + attribute-set: endpoint + dont-validate: [ strict ] + flags: [ uns-admin-perm ] + do: &get-addr-attrs + request: + attributes: + - addr + reply: + attributes: + - addr + dump: + reply: + attributes: + - addr + - + name: flush-addrs + doc: flush addresses + attribute-set: endpoint + dont-validate: [ strict ] + flags: [ uns-admin-perm ] + do: *add-addr-attrs + - + name: set-limits + doc: Set protocol limits + attribute-set: attr + dont-validate: [ strict ] + flags: [ uns-admin-perm ] + do: &mptcp-limits + request: + attributes: + - rcv-add-addrs + - subflows + - + name: get-limits + doc: Get protocol limits + attribute-set: attr + dont-validate: [ strict ] + do: &mptcp-get-limits + request: + attributes: + - rcv-add-addrs + - subflows + reply: + attributes: + - rcv-add-addrs + - subflows + - + name: set-flags + doc: Change endpoint flags + attribute-set: attr + dont-validate: [ strict ] + flags: [ uns-admin-perm ] + do: &mptcp-set-flags + request: + attributes: + - addr + - token + - addr-remote + - + name: announce + doc: announce new sf + attribute-set: attr + dont-validate: [ strict ] + flags: [ uns-admin-perm ] + do: &announce-add + request: + attributes: + - addr + - token + - + name: remove + doc: announce removal + attribute-set: attr + dont-validate: [ strict ] + flags: [ uns-admin-perm ] + do: + request: + attributes: + - token + - loc-id + - + name: subflow-create + doc: todo + attribute-set: attr + dont-validate: [ strict ] + flags: [ uns-admin-perm ] + do: &sf-create + request: + attributes: + - addr + - token + - addr-remote + - + name: subflow-destroy + doc: todo + attribute-set: attr + dont-validate: [ strict ] + flags: [ uns-admin-perm ] + do: *sf-create diff --git a/Documentation/netlink/specs/netdev.yaml b/Documentation/netlink/specs/netdev.yaml index 1c7284fd53..14511b13f3 100644 --- a/Documentation/netlink/specs/netdev.yaml +++ b/Documentation/netlink/specs/netdev.yaml @@ -42,6 +42,19 @@ definitions: doc: This feature informs if netdev implements non-linear XDP buffer support in ndo_xdp_xmit callback. + - + type: flags + name: xdp-rx-metadata + render-max: true + entries: + - + name: timestamp + doc: + Device is capable of exposing receive HW timestamp via bpf_xdp_metadata_rx_timestamp(). + - + name: hash + doc: + Device is capable of exposing receive packet hash via bpf_xdp_metadata_rx_hash(). attribute-sets: - @@ -61,13 +74,18 @@ attribute-sets: doc: Bitmask of enabled xdp-features. type: u64 enum: xdp-act - enum-as-flags: true - name: xdp-zc-max-segs doc: max fragment count supported by ZC driver type: u32 checks: min: 1 + - + name: xdp-rx-metadata-features + doc: Bitmask of supported XDP receive metadata features. + See Documentation/networking/xdp-rx-metadata.rst for more details. + type: u64 + enum: xdp-rx-metadata operations: list: @@ -84,6 +102,7 @@ operations: - ifindex - xdp-features - xdp-zc-max-segs + - xdp-rx-metadata-features dump: reply: *dev-all - diff --git a/Documentation/netlink/specs/nfsd.yaml b/Documentation/netlink/specs/nfsd.yaml new file mode 100644 index 0000000000..05acc73e2e --- /dev/null +++ b/Documentation/netlink/specs/nfsd.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) + +name: nfsd +protocol: genetlink +uapi-header: linux/nfsd_netlink.h + +doc: NFSD configuration over generic netlink. + +attribute-sets: + - + name: rpc-status + attributes: + - + name: xid + type: u32 + byte-order: big-endian + - + name: flags + type: u32 + - + name: prog + type: u32 + - + name: version + type: u8 + - + name: proc + type: u32 + - + name: service_time + type: s64 + - + name: pad + type: pad + - + name: saddr4 + type: u32 + byte-order: big-endian + display-hint: ipv4 + - + name: daddr4 + type: u32 + byte-order: big-endian + display-hint: ipv4 + - + name: saddr6 + type: binary + display-hint: ipv6 + - + name: daddr6 + type: binary + display-hint: ipv6 + - + name: sport + type: u16 + byte-order: big-endian + - + name: dport + type: u16 + byte-order: big-endian + - + name: compound-ops + type: u32 + multi-attr: true + +operations: + list: + - + name: rpc-status-get + doc: dump pending nfsd rpc + attribute-set: rpc-status + dump: + pre: nfsd-nl-rpc-status-get-start + post: nfsd-nl-rpc-status-get-done + reply: + attributes: + - xid + - flags + - prog + - version + - proc + - service_time + - saddr4 + - daddr4 + - saddr6 + - daddr6 + - sport + - dport + - compound-ops |