diff options
Diffstat (limited to 'Documentation/networking/device_drivers/ethernet/netronome')
-rw-r--r-- | Documentation/networking/device_drivers/ethernet/netronome/nfp.rst | 374 |
1 files changed, 374 insertions, 0 deletions
diff --git a/Documentation/networking/device_drivers/ethernet/netronome/nfp.rst b/Documentation/networking/device_drivers/ethernet/netronome/nfp.rst new file mode 100644 index 0000000000..650b57742d --- /dev/null +++ b/Documentation/networking/device_drivers/ethernet/netronome/nfp.rst @@ -0,0 +1,374 @@ +.. SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +.. include:: <isonum.txt> + +=========================================== +Network Flow Processor (NFP) Kernel Drivers +=========================================== + +:Copyright: |copy| 2019, Netronome Systems, Inc. +:Copyright: |copy| 2022, Corigine, Inc. + +Contents +======== + +- `Overview`_ +- `Acquiring Firmware`_ +- `Devlink Info`_ +- `Configure Device`_ +- `Statistics`_ + +Overview +======== + +This driver supports Netronome and Corigine's line of Network Flow Processor +devices, including the NFP3800, NFP4000, NFP5000, and NFP6000 models, which +are also incorporated in the companies' family of Agilio SmartNICs. The SR-IOV +physical and virtual functions for these devices are supported by the driver. + +Acquiring Firmware +================== + +The NFP3800, NFP4000 and NFP6000 devices require application specific firmware +to function. Application firmware can be located either on the host file system +or in the device flash (if supported by management firmware). + +Firmware files on the host filesystem contain card type (`AMDA-*` string), media +config etc. They should be placed in `/lib/firmware/netronome` directory to +load firmware from the host file system. + +Firmware for basic NIC operation is available in the upstream +`linux-firmware.git` repository. + +A more comprehensive list of firmware can be downloaded from the +`Corigine Support site <https://www.corigine.com/DPUDownload.html>`_. + +Firmware in NVRAM +----------------- + +Recent versions of management firmware supports loading application +firmware from flash when the host driver gets probed. The firmware loading +policy configuration may be used to configure this feature appropriately. + +Devlink or ethtool can be used to update the application firmware on the device +flash by providing the appropriate `nic_AMDA*.nffw` file to the respective +command. Users need to take care to write the correct firmware image for the +card and media configuration to flash. + +Available storage space in flash depends on the card being used. + +Dealing with multiple projects +------------------------------ + +NFP hardware is fully programmable therefore there can be different +firmware images targeting different applications. + +When using application firmware from host, we recommend placing +actual firmware files in application-named subdirectories in +`/lib/firmware/netronome` and linking the desired files, e.g.:: + + $ tree /lib/firmware/netronome/ + /lib/firmware/netronome/ + ├── bpf + │ ├── nic_AMDA0081-0001_1x40.nffw + │ └── nic_AMDA0081-0001_4x10.nffw + ├── flower + │ ├── nic_AMDA0081-0001_1x40.nffw + │ └── nic_AMDA0081-0001_4x10.nffw + ├── nic + │ ├── nic_AMDA0081-0001_1x40.nffw + │ └── nic_AMDA0081-0001_4x10.nffw + ├── nic_AMDA0081-0001_1x40.nffw -> bpf/nic_AMDA0081-0001_1x40.nffw + └── nic_AMDA0081-0001_4x10.nffw -> bpf/nic_AMDA0081-0001_4x10.nffw + + 3 directories, 8 files + +You may need to use hard instead of symbolic links on distributions +which use old `mkinitrd` command instead of `dracut` (e.g. Ubuntu). + +After changing firmware files you may need to regenerate the initramfs +image. Initramfs contains drivers and firmware files your system may +need to boot. Refer to the documentation of your distribution to find +out how to update initramfs. Good indication of stale initramfs +is system loading wrong driver or firmware on boot, but when driver is +later reloaded manually everything works correctly. + +Selecting firmware per device +----------------------------- + +Most commonly all cards on the system use the same type of firmware. +If you want to load a specific firmware image for a specific card, you +can use either the PCI bus address or serial number. The driver will +print which files it's looking for when it recognizes a NFP device:: + + nfp: Looking for firmware file in order of priority: + nfp: netronome/serial-00-12-34-aa-bb-cc-10-ff.nffw: not found + nfp: netronome/pci-0000:02:00.0.nffw: not found + nfp: netronome/nic_AMDA0081-0001_1x40.nffw: found, loading... + +In this case if file (or link) called *serial-00-12-34-aa-bb-5d-10-ff.nffw* +or *pci-0000:02:00.0.nffw* is present in `/lib/firmware/netronome` this +firmware file will take precedence over `nic_AMDA*` files. + +Note that `serial-*` and `pci-*` files are **not** automatically included +in initramfs, you will have to refer to documentation of appropriate tools +to find out how to include them. + +Running firmware version +------------------------ + +The version of the loaded firmware for a particular <netdev> interface, +(e.g. enp4s0), or an interface's port <netdev port> (e.g. enp4s0np0) can +be displayed with the ethtool command:: + + $ ethtool -i <netdev> + +Firmware loading policy +----------------------- + +Firmware loading policy is controlled via three HWinfo parameters +stored as key value pairs in the device flash: + +app_fw_from_flash + Defines which firmware should take precedence, 'Disk' (0), 'Flash' (1) or + the 'Preferred' (2) firmware. When 'Preferred' is selected, the management + firmware makes the decision over which firmware will be loaded by comparing + versions of the flash firmware and the host supplied firmware. + This variable is configurable using the 'fw_load_policy' + devlink parameter. + +abi_drv_reset + Defines if the driver should reset the firmware when + the driver is probed, either 'Disk' (0) if firmware was found on disk, + 'Always' (1) reset or 'Never' (2) reset. Note that the device is always + reset on driver unload if firmware was loaded when the driver was probed. + This variable is configurable using the 'reset_dev_on_drv_probe' + devlink parameter. + +abi_drv_load_ifc + Defines a list of PF devices allowed to load FW on the device. + This variable is not currently user configurable. + +Devlink Info +============ + +The devlink info command displays the running and stored firmware versions +on the device, serial number and board information. + +Devlink info command example (replace PCI address):: + + $ devlink dev info pci/0000:03:00.0 + pci/0000:03:00.0: + driver nfp + serial_number CSAAMDA2001-1003000111 + versions: + fixed: + board.id AMDA2001-1003 + board.rev 01 + board.manufacture CSA + board.model mozart + running: + fw.mgmt 22.10.0-rc3 + fw.cpld 0x1000003 + fw.app nic-22.09.0 + chip.init AMDA-2001-1003 1003000111 + stored: + fw.bundle_id bspbundle_1003000111 + fw.mgmt 22.10.0-rc3 + fw.cpld 0x0 + chip.init AMDA-2001-1003 1003000111 + +Configure Device +================ + +This section explains how to use Agilio SmartNICs running basic NIC firmware. + +Configure interface link-speed +------------------------------ +The following steps explains how to change between 10G mode and 25G mode on +Agilio CX 2x25GbE cards. The changing of port speed must be done in order, +port 0 (p0) must be set to 10G before port 1 (p1) may be set to 10G. + +Down the respective interface(s):: + + $ ip link set dev <netdev port 0> down + $ ip link set dev <netdev port 1> down + +Set interface link-speed to 10G:: + + $ ethtool -s <netdev port 0> speed 10000 + $ ethtool -s <netdev port 1> speed 10000 + +Set interface link-speed to 25G:: + + $ ethtool -s <netdev port 0> speed 25000 + $ ethtool -s <netdev port 1> speed 25000 + +Reload driver for changes to take effect:: + + $ rmmod nfp; modprobe nfp + +Configure interface Maximum Transmission Unit (MTU) +--------------------------------------------------- + +The MTU of interfaces can temporarily be set using the iproute2, ip link or +ifconfig tools. Note that this change will not persist. Setting this via +Network Manager, or another appropriate OS configuration tool, is +recommended as changes to the MTU using Network Manager can be made to +persist. + +Set interface MTU to 9000 bytes:: + + $ ip link set dev <netdev port> mtu 9000 + +It is the responsibility of the user or the orchestration layer to set +appropriate MTU values when handling jumbo frames or utilizing tunnels. For +example, if packets sent from a VM are to be encapsulated on the card and +egress a physical port, then the MTU of the VF should be set to lower than +that of the physical port to account for the extra bytes added by the +additional header. If a setup is expected to see fallback traffic between +the SmartNIC and the kernel then the user should also ensure that the PF MTU +is appropriately set to avoid unexpected drops on this path. + +Configure Forward Error Correction (FEC) modes +---------------------------------------------- + +Agilio SmartNICs support FEC mode configuration, e.g. Auto, Firecode Base-R, +ReedSolomon and Off modes. Each physical port's FEC mode can be set +independently using ethtool. The supported FEC modes for an interface can +be viewed using:: + + $ ethtool <netdev> + +The currently configured FEC mode can be viewed using:: + + $ ethtool --show-fec <netdev> + +To force the FEC mode for a particular port, auto-negotiation must be disabled +(see the `Auto-negotiation`_ section). An example of how to set the FEC mode +to Reed-Solomon is:: + + $ ethtool --set-fec <netdev> encoding rs + +Auto-negotiation +---------------- + +To change auto-negotiation settings, the link must first be put down. After the +link is down, auto-negotiation can be enabled or disabled using:: + + ethtool -s <netdev> autoneg <on|off> + +Statistics +========== + +Following device statistics are available through the ``ethtool -S`` interface: + +.. flat-table:: NFP device statistics + :header-rows: 1 + :widths: 3 1 11 + + * - Name + - ID + - Meaning + + * - dev_rx_discards + - 1 + - Packet can be discarded on the RX path for one of the following reasons: + + * The NIC is not in promisc mode, and the destination MAC address + doesn't match the interfaces' MAC address. + * The received packet is larger than the max buffer size on the host. + I.e. it exceeds the Layer 3 MRU. + * There is no freelist descriptor available on the host for the packet. + It is likely that the NIC couldn't cache one in time. + * A BPF program discarded the packet. + * The datapath drop action was executed. + * The MAC discarded the packet due to lack of ingress buffer space + on the NIC. + + * - dev_rx_errors + - 2 + - A packet can be counted (and dropped) as RX error for the following + reasons: + + * A problem with the VEB lookup (only when SR-IOV is used). + * A physical layer problem that causes Ethernet errors, like FCS or + alignment errors. The cause is usually faulty cables or SFPs. + + * - dev_rx_bytes + - 3 + - Total number of bytes received. + + * - dev_rx_uc_bytes + - 4 + - Unicast bytes received. + + * - dev_rx_mc_bytes + - 5 + - Multicast bytes received. + + * - dev_rx_bc_bytes + - 6 + - Broadcast bytes received. + + * - dev_rx_pkts + - 7 + - Total number of packets received. + + * - dev_rx_mc_pkts + - 8 + - Multicast packets received. + + * - dev_rx_bc_pkts + - 9 + - Broadcast packets received. + + * - dev_tx_discards + - 10 + - A packet can be discarded in the TX direction if the MAC is + being flow controlled and the NIC runs out of TX queue space. + + * - dev_tx_errors + - 11 + - A packet can be counted as TX error (and dropped) for one for the + following reasons: + + * The packet is an LSO segment, but the Layer 3 or Layer 4 offset + could not be determined. Therefore LSO could not continue. + * An invalid packet descriptor was received over PCIe. + * The packet Layer 3 length exceeds the device MTU. + * An error on the MAC/physical layer. Usually due to faulty cables or + SFPs. + * A CTM buffer could not be allocated. + * The packet offset was incorrect and could not be fixed by the NIC. + + * - dev_tx_bytes + - 12 + - Total number of bytes transmitted. + + * - dev_tx_uc_bytes + - 13 + - Unicast bytes transmitted. + + * - dev_tx_mc_bytes + - 14 + - Multicast bytes transmitted. + + * - dev_tx_bc_bytes + - 15 + - Broadcast bytes transmitted. + + * - dev_tx_pkts + - 16 + - Total number of packets transmitted. + + * - dev_tx_mc_pkts + - 17 + - Multicast packets transmitted. + + * - dev_tx_bc_pkts + - 18 + - Broadcast packets transmitted. + +Note that statistics unknown to the driver will be displayed as +``dev_unknown_stat$ID``, where ``$ID`` refers to the second column +above. |