diff options
Diffstat (limited to '')
-rw-r--r-- | Documentation/networking/device_drivers/qlogic/qlge.rst | 118 |
1 files changed, 0 insertions, 118 deletions
diff --git a/Documentation/networking/device_drivers/qlogic/qlge.rst b/Documentation/networking/device_drivers/qlogic/qlge.rst deleted file mode 100644 index 0b888253d1..0000000000 --- a/Documentation/networking/device_drivers/qlogic/qlge.rst +++ /dev/null @@ -1,118 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -======================================= -QLogic QLGE 10Gb Ethernet device driver -======================================= - -This driver use drgn and devlink for debugging. - -Dump kernel data structures in drgn ------------------------------------ - -To dump kernel data structures, the following Python script can be used -in drgn: - -.. code-block:: python - - def align(x, a): - """the alignment a should be a power of 2 - """ - mask = a - 1 - return (x+ mask) & ~mask - - def struct_size(struct_type): - struct_str = "struct {}".format(struct_type) - return sizeof(Object(prog, struct_str, address=0x0)) - - def netdev_priv(netdevice): - NETDEV_ALIGN = 32 - return netdevice.value_() + align(struct_size("net_device"), NETDEV_ALIGN) - - name = 'xxx' - qlge_device = None - netdevices = prog['init_net'].dev_base_head.address_of_() - for netdevice in list_for_each_entry("struct net_device", netdevices, "dev_list"): - if netdevice.name.string_().decode('ascii') == name: - print(netdevice.name) - - ql_adapter = Object(prog, "struct ql_adapter", address=netdev_priv(qlge_device)) - -The struct ql_adapter will be printed in drgn as follows, - - >>> ql_adapter - (struct ql_adapter){ - .ricb = (struct ricb){ - .base_cq = (u8)0, - .flags = (u8)120, - .mask = (__le16)26637, - .hash_cq_id = (u8 [1024]){ 172, 142, 255, 255 }, - .ipv6_hash_key = (__le32 [10]){}, - .ipv4_hash_key = (__le32 [4]){}, - }, - .flags = (unsigned long)0, - .wol = (u32)0, - .nic_stats = (struct nic_stats){ - .tx_pkts = (u64)0, - .tx_bytes = (u64)0, - .tx_mcast_pkts = (u64)0, - .tx_bcast_pkts = (u64)0, - .tx_ucast_pkts = (u64)0, - .tx_ctl_pkts = (u64)0, - .tx_pause_pkts = (u64)0, - ... - }, - .active_vlans = (unsigned long [64]){ - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 52780853100545, 18446744073709551615, - 18446619461681283072, 0, 42949673024, 2147483647, - }, - .rx_ring = (struct rx_ring [17]){ - { - .cqicb = (struct cqicb){ - .msix_vect = (u8)0, - .reserved1 = (u8)0, - .reserved2 = (u8)0, - .flags = (u8)0, - .len = (__le16)0, - .rid = (__le16)0, - ... - }, - .cq_base = (void *)0x0, - .cq_base_dma = (dma_addr_t)0, - } - ... - } - } - -coredump via devlink --------------------- - - -And the coredump obtained via devlink in json format looks like, - -.. code:: shell - - $ devlink health dump show DEVICE reporter coredump -p -j - { - "Core Registers": { - "segment": 1, - "values": [ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ] - }, - "Test Logic Regs": { - "segment": 2, - "values": [ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ] - }, - "RMII Registers": { - "segment": 3, - "values": [ 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 ] - }, - ... - "Sem Registers": { - "segment": 50, - "values": [ 0,0,0,0 ] - } - } - -When the module parameter qlge_force_coredump is set to be true, the MPI -RISC reset before coredumping. So coredumping will much longer since -devlink tool has to wait for 5 secs for the resetting to be -finished. |