diff options
Diffstat (limited to 'Documentation/process/submitting-patches.rst')
| -rw-r--r-- | Documentation/process/submitting-patches.rst | 871 |
1 files changed, 871 insertions, 0 deletions
diff --git a/Documentation/process/submitting-patches.rst b/Documentation/process/submitting-patches.rst new file mode 100644 index 0000000000..efac910e26 --- /dev/null +++ b/Documentation/process/submitting-patches.rst @@ -0,0 +1,871 @@ +.. _submittingpatches: + +Submitting patches: the essential guide to getting your code into the kernel +============================================================================ + +For a person or company who wishes to submit a change to the Linux +kernel, the process can sometimes be daunting if you're not familiar +with "the system." This text is a collection of suggestions which +can greatly increase the chances of your change being accepted. + +This document contains a large number of suggestions in a relatively terse +format. For detailed information on how the kernel development process +works, see Documentation/process/development-process.rst. Also, read +Documentation/process/submit-checklist.rst +for a list of items to check before submitting code. +For device tree binding patches, read +Documentation/devicetree/bindings/submitting-patches.rst. + +This documentation assumes that you're using ``git`` to prepare your patches. +If you're unfamiliar with ``git``, you would be well-advised to learn how to +use it, it will make your life as a kernel developer and in general much +easier. + +Some subsystems and maintainer trees have additional information about +their workflow and expectations, see +:ref:`Documentation/process/maintainer-handbooks.rst <maintainer_handbooks_main>`. + +Obtain a current source tree +---------------------------- + +If you do not have a repository with the current kernel source handy, use +``git`` to obtain one. You'll want to start with the mainline repository, +which can be grabbed with:: + + git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git + +Note, however, that you may not want to develop against the mainline tree +directly. Most subsystem maintainers run their own trees and want to see +patches prepared against those trees. See the **T:** entry for the subsystem +in the MAINTAINERS file to find that tree, or simply ask the maintainer if +the tree is not listed there. + +.. _describe_changes: + +Describe your changes +--------------------- + +Describe your problem. Whether your patch is a one-line bug fix or +5000 lines of a new feature, there must be an underlying problem that +motivated you to do this work. Convince the reviewer that there is a +problem worth fixing and that it makes sense for them to read past the +first paragraph. + +Describe user-visible impact. Straight up crashes and lockups are +pretty convincing, but not all bugs are that blatant. Even if the +problem was spotted during code review, describe the impact you think +it can have on users. Keep in mind that the majority of Linux +installations run kernels from secondary stable trees or +vendor/product-specific trees that cherry-pick only specific patches +from upstream, so include anything that could help route your change +downstream: provoking circumstances, excerpts from dmesg, crash +descriptions, performance regressions, latency spikes, lockups, etc. + +Quantify optimizations and trade-offs. If you claim improvements in +performance, memory consumption, stack footprint, or binary size, +include numbers that back them up. But also describe non-obvious +costs. Optimizations usually aren't free but trade-offs between CPU, +memory, and readability; or, when it comes to heuristics, between +different workloads. Describe the expected downsides of your +optimization so that the reviewer can weigh costs against benefits. + +Once the problem is established, describe what you are actually doing +about it in technical detail. It's important to describe the change +in plain English for the reviewer to verify that the code is behaving +as you intend it to. + +The maintainer will thank you if you write your patch description in a +form which can be easily pulled into Linux's source code management +system, ``git``, as a "commit log". See :ref:`the_canonical_patch_format`. + +Solve only one problem per patch. If your description starts to get +long, that's a sign that you probably need to split up your patch. +See :ref:`split_changes`. + +When you submit or resubmit a patch or patch series, include the +complete patch description and justification for it. Don't just +say that this is version N of the patch (series). Don't expect the +subsystem maintainer to refer back to earlier patch versions or referenced +URLs to find the patch description and put that into the patch. +I.e., the patch (series) and its description should be self-contained. +This benefits both the maintainers and reviewers. Some reviewers +probably didn't even receive earlier versions of the patch. + +Describe your changes in imperative mood, e.g. "make xyzzy do frotz" +instead of "[This patch] makes xyzzy do frotz" or "[I] changed xyzzy +to do frotz", as if you are giving orders to the codebase to change +its behaviour. + +If you want to refer to a specific commit, don't just refer to the +SHA-1 ID of the commit. Please also include the oneline summary of +the commit, to make it easier for reviewers to know what it is about. +Example:: + + Commit e21d2170f36602ae2708 ("video: remove unnecessary + platform_set_drvdata()") removed the unnecessary + platform_set_drvdata(), but left the variable "dev" unused, + delete it. + +You should also be sure to use at least the first twelve characters of the +SHA-1 ID. The kernel repository holds a *lot* of objects, making +collisions with shorter IDs a real possibility. Bear in mind that, even if +there is no collision with your six-character ID now, that condition may +change five years from now. + +If related discussions or any other background information behind the change +can be found on the web, add 'Link:' tags pointing to it. If the patch is a +result of some earlier mailing list discussions or something documented on the +web, point to it. + +When linking to mailing list archives, preferably use the lore.kernel.org +message archiver service. To create the link URL, use the contents of the +``Message-Id`` header of the message without the surrounding angle brackets. +For example:: + + Link: https://lore.kernel.org/r/30th.anniversary.repost@klaava.Helsinki.FI/ + +Please check the link to make sure that it is actually working and points +to the relevant message. + +However, try to make your explanation understandable without external +resources. In addition to giving a URL to a mailing list archive or bug, +summarize the relevant points of the discussion that led to the +patch as submitted. + +In case your patch fixes a bug, use the 'Closes:' tag with a URL referencing +the report in the mailing list archives or a public bug tracker. For example:: + + Closes: https://example.com/issues/1234 + +Some bug trackers have the ability to close issues automatically when a +commit with such a tag is applied. Some bots monitoring mailing lists can +also track such tags and take certain actions. Private bug trackers and +invalid URLs are forbidden. + +If your patch fixes a bug in a specific commit, e.g. you found an issue using +``git bisect``, please use the 'Fixes:' tag with the first 12 characters of +the SHA-1 ID, and the one line summary. Do not split the tag across multiple +lines, tags are exempt from the "wrap at 75 columns" rule in order to simplify +parsing scripts. For example:: + + Fixes: 54a4f0239f2e ("KVM: MMU: make kvm_mmu_zap_page() return the number of pages it actually freed") + +The following ``git config`` settings can be used to add a pretty format for +outputting the above style in the ``git log`` or ``git show`` commands:: + + [core] + abbrev = 12 + [pretty] + fixes = Fixes: %h (\"%s\") + +An example call:: + + $ git log -1 --pretty=fixes 54a4f0239f2e + Fixes: 54a4f0239f2e ("KVM: MMU: make kvm_mmu_zap_page() return the number of pages it actually freed") + +.. _split_changes: + +Separate your changes +--------------------- + +Separate each **logical change** into a separate patch. + +For example, if your changes include both bug fixes and performance +enhancements for a single driver, separate those changes into two +or more patches. If your changes include an API update, and a new +driver which uses that new API, separate those into two patches. + +On the other hand, if you make a single change to numerous files, +group those changes into a single patch. Thus a single logical change +is contained within a single patch. + +The point to remember is that each patch should make an easily understood +change that can be verified by reviewers. Each patch should be justifiable +on its own merits. + +If one patch depends on another patch in order for a change to be +complete, that is OK. Simply note **"this patch depends on patch X"** +in your patch description. + +When dividing your change into a series of patches, take special care to +ensure that the kernel builds and runs properly after each patch in the +series. Developers using ``git bisect`` to track down a problem can end up +splitting your patch series at any point; they will not thank you if you +introduce bugs in the middle. + +If you cannot condense your patch set into a smaller set of patches, +then only post say 15 or so at a time and wait for review and integration. + + + +Style-check your changes +------------------------ + +Check your patch for basic style violations, details of which can be +found in Documentation/process/coding-style.rst. +Failure to do so simply wastes +the reviewers time and will get your patch rejected, probably +without even being read. + +One significant exception is when moving code from one file to +another -- in this case you should not modify the moved code at all in +the same patch which moves it. This clearly delineates the act of +moving the code and your changes. This greatly aids review of the +actual differences and allows tools to better track the history of +the code itself. + +Check your patches with the patch style checker prior to submission +(scripts/checkpatch.pl). Note, though, that the style checker should be +viewed as a guide, not as a replacement for human judgment. If your code +looks better with a violation then its probably best left alone. + +The checker reports at three levels: + - ERROR: things that are very likely to be wrong + - WARNING: things requiring careful review + - CHECK: things requiring thought + +You should be able to justify all violations that remain in your +patch. + + +Select the recipients for your patch +------------------------------------ + +You should always copy the appropriate subsystem maintainer(s) and list(s) on +any patch to code that they maintain; look through the MAINTAINERS file and the +source code revision history to see who those maintainers are. The script +scripts/get_maintainer.pl can be very useful at this step (pass paths to your +patches as arguments to scripts/get_maintainer.pl). If you cannot find a +maintainer for the subsystem you are working on, Andrew Morton +(akpm@linux-foundation.org) serves as a maintainer of last resort. + +linux-kernel@vger.kernel.org should be used by default for all patches, but the +volume on that list has caused a number of developers to tune it out. Please +do not spam unrelated lists and unrelated people, though. + +Many kernel-related lists are hosted on vger.kernel.org; you can find a +list of them at http://vger.kernel.org/vger-lists.html. There are +kernel-related lists hosted elsewhere as well, though. + +Do not send more than 15 patches at once to the vger mailing lists!!! + +Linus Torvalds is the final arbiter of all changes accepted into the +Linux kernel. His e-mail address is <torvalds@linux-foundation.org>. +He gets a lot of e-mail, and, at this point, very few patches go through +Linus directly, so typically you should do your best to -avoid- +sending him e-mail. + +If you have a patch that fixes an exploitable security bug, send that patch +to security@kernel.org. For severe bugs, a short embargo may be considered +to allow distributors to get the patch out to users; in such cases, +obviously, the patch should not be sent to any public lists. See also +Documentation/process/security-bugs.rst. + +Patches that fix a severe bug in a released kernel should be directed +toward the stable maintainers by putting a line like this:: + + Cc: stable@vger.kernel.org + +into the sign-off area of your patch (note, NOT an email recipient). You +should also read Documentation/process/stable-kernel-rules.rst +in addition to this document. + +If changes affect userland-kernel interfaces, please send the MAN-PAGES +maintainer (as listed in the MAINTAINERS file) a man-pages patch, or at +least a notification of the change, so that some information makes its way +into the manual pages. User-space API changes should also be copied to +linux-api@vger.kernel.org. + + +No MIME, no links, no compression, no attachments. Just plain text +------------------------------------------------------------------- + +Linus and other kernel developers need to be able to read and comment +on the changes you are submitting. It is important for a kernel +developer to be able to "quote" your changes, using standard e-mail +tools, so that they may comment on specific portions of your code. + +For this reason, all patches should be submitted by e-mail "inline". The +easiest way to do this is with ``git send-email``, which is strongly +recommended. An interactive tutorial for ``git send-email`` is available at +https://git-send-email.io. + +If you choose not to use ``git send-email``: + +.. warning:: + + Be wary of your editor's word-wrap corrupting your patch, + if you choose to cut-n-paste your patch. + +Do not attach the patch as a MIME attachment, compressed or not. +Many popular e-mail applications will not always transmit a MIME +attachment as plain text, making it impossible to comment on your +code. A MIME attachment also takes Linus a bit more time to process, +decreasing the likelihood of your MIME-attached change being accepted. + +Exception: If your mailer is mangling patches then someone may ask +you to re-send them using MIME. + +See Documentation/process/email-clients.rst for hints about configuring +your e-mail client so that it sends your patches untouched. + +Respond to review comments +-------------------------- + +Your patch will almost certainly get comments from reviewers on ways in +which the patch can be improved, in the form of a reply to your email. You must +respond to those comments; ignoring reviewers is a good way to get ignored in +return. You can simply reply to their emails to answer their comments. Review +comments or questions that do not lead to a code change should almost certainly +bring about a comment or changelog entry so that the next reviewer better +understands what is going on. + +Be sure to tell the reviewers what changes you are making and to thank them +for their time. Code review is a tiring and time-consuming process, and +reviewers sometimes get grumpy. Even in that case, though, respond +politely and address the problems they have pointed out. When sending a next +version, add a ``patch changelog`` to the cover letter or to individual patches +explaining difference against previous submission (see +:ref:`the_canonical_patch_format`). + +See Documentation/process/email-clients.rst for recommendations on email +clients and mailing list etiquette. + +.. _interleaved_replies: + +Use trimmed interleaved replies in email discussions +---------------------------------------------------- +Top-posting is strongly discouraged in Linux kernel development +discussions. Interleaved (or "inline") replies make conversations much +easier to follow. For more details see: +https://en.wikipedia.org/wiki/Posting_style#Interleaved_style + +As is frequently quoted on the mailing list:: + + A: http://en.wikipedia.org/wiki/Top_post + Q: Were do I find info about this thing called top-posting? + A: Because it messes up the order in which people normally read text. + Q: Why is top-posting such a bad thing? + A: Top-posting. + Q: What is the most annoying thing in e-mail? + +Similarly, please trim all unneeded quotations that aren't relevant +to your reply. This makes responses easier to find, and saves time and +space. For more details see: http://daringfireball.net/2007/07/on_top :: + + A: No. + Q: Should I include quotations after my reply? + +.. _resend_reminders: + +Don't get discouraged - or impatient +------------------------------------ + +After you have submitted your change, be patient and wait. Reviewers are +busy people and may not get to your patch right away. + +Once upon a time, patches used to disappear into the void without comment, +but the development process works more smoothly than that now. You should +receive comments within a week or so; if that does not happen, make sure +that you have sent your patches to the right place. Wait for a minimum of +one week before resubmitting or pinging reviewers - possibly longer during +busy times like merge windows. + +It's also ok to resend the patch or the patch series after a couple of +weeks with the word "RESEND" added to the subject line:: + + [PATCH Vx RESEND] sub/sys: Condensed patch summary + +Don't add "RESEND" when you are submitting a modified version of your +patch or patch series - "RESEND" only applies to resubmission of a +patch or patch series which have not been modified in any way from the +previous submission. + + +Include PATCH in the subject +----------------------------- + +Due to high e-mail traffic to Linus, and to linux-kernel, it is common +convention to prefix your subject line with [PATCH]. This lets Linus +and other kernel developers more easily distinguish patches from other +e-mail discussions. + +``git send-email`` will do this for you automatically. + + +Sign your work - the Developer's Certificate of Origin +------------------------------------------------------ + +To improve tracking of who did what, especially with patches that can +percolate to their final resting place in the kernel through several +layers of maintainers, we've introduced a "sign-off" procedure on +patches that are being emailed around. + +The sign-off is a simple line at the end of the explanation for the +patch, which certifies that you wrote it or otherwise have the right to +pass it on as an open-source patch. The rules are pretty simple: if you +can certify the below: + +Developer's Certificate of Origin 1.1 +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +By making a contribution to this project, I certify that: + + (a) The contribution was created in whole or in part by me and I + have the right to submit it under the open source license + indicated in the file; or + + (b) The contribution is based upon previous work that, to the best + of my knowledge, is covered under an appropriate open source + license and I have the right under that license to submit that + work with modifications, whether created in whole or in part + by me, under the same open source license (unless I am + permitted to submit under a different license), as indicated + in the file; or + + (c) The contribution was provided directly to me by some other + person who certified (a), (b) or (c) and I have not modified + it. + + (d) I understand and agree that this project and the contribution + are public and that a record of the contribution (including all + personal information I submit with it, including my sign-off) is + maintained indefinitely and may be redistributed consistent with + this project or the open source license(s) involved. + +then you just add a line saying:: + + Signed-off-by: Random J Developer <random@developer.example.org> + +using a known identity (sorry, no anonymous contributions.) +This will be done for you automatically if you use ``git commit -s``. +Reverts should also include "Signed-off-by". ``git revert -s`` does that +for you. + +Some people also put extra tags at the end. They'll just be ignored for +now, but you can do this to mark internal company procedures or just +point out some special detail about the sign-off. + +Any further SoBs (Signed-off-by:'s) following the author's SoB are from +people handling and transporting the patch, but were not involved in its +development. SoB chains should reflect the **real** route a patch took +as it was propagated to the maintainers and ultimately to Linus, with +the first SoB entry signalling primary authorship of a single author. + + +When to use Acked-by:, Cc:, and Co-developed-by: +------------------------------------------------ + +The Signed-off-by: tag indicates that the signer was involved in the +development of the patch, or that he/she was in the patch's delivery path. + +If a person was not directly involved in the preparation or handling of a +patch but wishes to signify and record their approval of it then they can +ask to have an Acked-by: line added to the patch's changelog. + +Acked-by: is often used by the maintainer of the affected code when that +maintainer neither contributed to nor forwarded the patch. + +Acked-by: is not as formal as Signed-off-by:. It is a record that the acker +has at least reviewed the patch and has indicated acceptance. Hence patch +mergers will sometimes manually convert an acker's "yep, looks good to me" +into an Acked-by: (but note that it is usually better to ask for an +explicit ack). + +Acked-by: does not necessarily indicate acknowledgement of the entire patch. +For example, if a patch affects multiple subsystems and has an Acked-by: from +one subsystem maintainer then this usually indicates acknowledgement of just +the part which affects that maintainer's code. Judgement should be used here. +When in doubt people should refer to the original discussion in the mailing +list archives. + +If a person has had the opportunity to comment on a patch, but has not +provided such comments, you may optionally add a ``Cc:`` tag to the patch. +This is the only tag which might be added without an explicit action by the +person it names - but it should indicate that this person was copied on the +patch. This tag documents that potentially interested parties +have been included in the discussion. + +Co-developed-by: states that the patch was co-created by multiple developers; +it is used to give attribution to co-authors (in addition to the author +attributed by the From: tag) when several people work on a single patch. Since +Co-developed-by: denotes authorship, every Co-developed-by: must be immediately +followed by a Signed-off-by: of the associated co-author. Standard sign-off +procedure applies, i.e. the ordering of Signed-off-by: tags should reflect the +chronological history of the patch insofar as possible, regardless of whether +the author is attributed via From: or Co-developed-by:. Notably, the last +Signed-off-by: must always be that of the developer submitting the patch. + +Note, the From: tag is optional when the From: author is also the person (and +email) listed in the From: line of the email header. + +Example of a patch submitted by the From: author:: + + <changelog> + + Co-developed-by: First Co-Author <first@coauthor.example.org> + Signed-off-by: First Co-Author <first@coauthor.example.org> + Co-developed-by: Second Co-Author <second@coauthor.example.org> + Signed-off-by: Second Co-Author <second@coauthor.example.org> + Signed-off-by: From Author <from@author.example.org> + +Example of a patch submitted by a Co-developed-by: author:: + + From: From Author <from@author.example.org> + + <changelog> + + Co-developed-by: Random Co-Author <random@coauthor.example.org> + Signed-off-by: Random Co-Author <random@coauthor.example.org> + Signed-off-by: From Author <from@author.example.org> + Co-developed-by: Submitting Co-Author <sub@coauthor.example.org> + Signed-off-by: Submitting Co-Author <sub@coauthor.example.org> + + +Using Reported-by:, Tested-by:, Reviewed-by:, Suggested-by: and Fixes: +---------------------------------------------------------------------- + +The Reported-by tag gives credit to people who find bugs and report them and it +hopefully inspires them to help us again in the future. The tag is intended for +bugs; please do not use it to credit feature requests. The tag should be +followed by a Closes: tag pointing to the report, unless the report is not +available on the web. The Link: tag can be used instead of Closes: if the patch +fixes a part of the issue(s) being reported. Please note that if the bug was +reported in private, then ask for permission first before using the Reported-by +tag. + +A Tested-by: tag indicates that the patch has been successfully tested (in +some environment) by the person named. This tag informs maintainers that +some testing has been performed, provides a means to locate testers for +future patches, and ensures credit for the testers. + +Reviewed-by:, instead, indicates that the patch has been reviewed and found +acceptable according to the Reviewer's Statement: + +Reviewer's statement of oversight +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +By offering my Reviewed-by: tag, I state that: + + (a) I have carried out a technical review of this patch to + evaluate its appropriateness and readiness for inclusion into + the mainline kernel. + + (b) Any problems, concerns, or questions relating to the patch + have been communicated back to the submitter. I am satisfied + with the submitter's response to my comments. + + (c) While there may be things that could be improved with this + submission, I believe that it is, at this time, (1) a + worthwhile modification to the kernel, and (2) free of known + issues which would argue against its inclusion. + + (d) While I have reviewed the patch and believe it to be sound, I + do not (unless explicitly stated elsewhere) make any + warranties or guarantees that it will achieve its stated + purpose or function properly in any given situation. + +A Reviewed-by tag is a statement of opinion that the patch is an +appropriate modification of the kernel without any remaining serious +technical issues. Any interested reviewer (who has done the work) can +offer a Reviewed-by tag for a patch. This tag serves to give credit to +reviewers and to inform maintainers of the degree of review which has been +done on the patch. Reviewed-by: tags, when supplied by reviewers known to +understand the subject area and to perform thorough reviews, will normally +increase the likelihood of your patch getting into the kernel. + +Both Tested-by and Reviewed-by tags, once received on mailing list from tester +or reviewer, should be added by author to the applicable patches when sending +next versions. However if the patch has changed substantially in following +version, these tags might not be applicable anymore and thus should be removed. +Usually removal of someone's Tested-by or Reviewed-by tags should be mentioned +in the patch changelog (after the '---' separator). + +A Suggested-by: tag indicates that the patch idea is suggested by the person +named and ensures credit to the person for the idea. Please note that this +tag should not be added without the reporter's permission, especially if the +idea was not posted in a public forum. That said, if we diligently credit our +idea reporters, they will, hopefully, be inspired to help us again in the +future. + +A Fixes: tag indicates that the patch fixes an issue in a previous commit. It +is used to make it easy to determine where a bug originated, which can help +review a bug fix. This tag also assists the stable kernel team in determining +which stable kernel versions should receive your fix. This is the preferred +method for indicating a bug fixed by the patch. See :ref:`describe_changes` +for more details. + +Note: Attaching a Fixes: tag does not subvert the stable kernel rules +process nor the requirement to Cc: stable@vger.kernel.org on all stable +patch candidates. For more information, please read +Documentation/process/stable-kernel-rules.rst. + +.. _the_canonical_patch_format: + +The canonical patch format +-------------------------- + +This section describes how the patch itself should be formatted. Note +that, if you have your patches stored in a ``git`` repository, proper patch +formatting can be had with ``git format-patch``. The tools cannot create +the necessary text, though, so read the instructions below anyway. + +The canonical patch subject line is:: + + Subject: [PATCH 001/123] subsystem: summary phrase + +The canonical patch message body contains the following: + + - A ``from`` line specifying the patch author, followed by an empty + line (only needed if the person sending the patch is not the author). + + - The body of the explanation, line wrapped at 75 columns, which will + be copied to the permanent changelog to describe this patch. + + - An empty line. + + - The ``Signed-off-by:`` lines, described above, which will + also go in the changelog. + + - A marker line containing simply ``---``. + + - Any additional comments not suitable for the changelog. + + - The actual patch (``diff`` output). + +The Subject line format makes it very easy to sort the emails +alphabetically by subject line - pretty much any email reader will +support that - since because the sequence number is zero-padded, +the numerical and alphabetic sort is the same. + +The ``subsystem`` in the email's Subject should identify which +area or subsystem of the kernel is being patched. + +The ``summary phrase`` in the email's Subject should concisely +describe the patch which that email contains. The ``summary +phrase`` should not be a filename. Do not use the same ``summary +phrase`` for every patch in a whole patch series (where a ``patch +series`` is an ordered sequence of multiple, related patches). + +Bear in mind that the ``summary phrase`` of your email becomes a +globally-unique identifier for that patch. It propagates all the way +into the ``git`` changelog. The ``summary phrase`` may later be used in +developer discussions which refer to the patch. People will want to +google for the ``summary phrase`` to read discussion regarding that +patch. It will also be the only thing that people may quickly see +when, two or three months later, they are going through perhaps +thousands of patches using tools such as ``gitk`` or ``git log +--oneline``. + +For these reasons, the ``summary`` must be no more than 70-75 +characters, and it must describe both what the patch changes, as well +as why the patch might be necessary. It is challenging to be both +succinct and descriptive, but that is what a well-written summary +should do. + +The ``summary phrase`` may be prefixed by tags enclosed in square +brackets: "Subject: [PATCH <tag>...] <summary phrase>". The tags are +not considered part of the summary phrase, but describe how the patch +should be treated. Common tags might include a version descriptor if +the multiple versions of the patch have been sent out in response to +comments (i.e., "v1, v2, v3"), or "RFC" to indicate a request for +comments. + +If there are four patches in a patch series the individual patches may +be numbered like this: 1/4, 2/4, 3/4, 4/4. This assures that developers +understand the order in which the patches should be applied and that +they have reviewed or applied all of the patches in the patch series. + +Here are some good example Subjects:: + + Subject: [PATCH 2/5] ext2: improve scalability of bitmap searching + Subject: [PATCH v2 01/27] x86: fix eflags tracking + Subject: [PATCH v2] sub/sys: Condensed patch summary + Subject: [PATCH v2 M/N] sub/sys: Condensed patch summary + +The ``from`` line must be the very first line in the message body, +and has the form: + + From: Patch Author <author@example.com> + +The ``from`` line specifies who will be credited as the author of the +patch in the permanent changelog. If the ``from`` line is missing, +then the ``From:`` line from the email header will be used to determine +the patch author in the changelog. + +The explanation body will be committed to the permanent source +changelog, so should make sense to a competent reader who has long since +forgotten the immediate details of the discussion that might have led to +this patch. Including symptoms of the failure which the patch addresses +(kernel log messages, oops messages, etc.) are especially useful for +people who might be searching the commit logs looking for the applicable +patch. The text should be written in such detail so that when read +weeks, months or even years later, it can give the reader the needed +details to grasp the reasoning for **why** the patch was created. + +If a patch fixes a compile failure, it may not be necessary to include +_all_ of the compile failures; just enough that it is likely that +someone searching for the patch can find it. As in the ``summary +phrase``, it is important to be both succinct as well as descriptive. + +The ``---`` marker line serves the essential purpose of marking for +patch handling tools where the changelog message ends. + +One good use for the additional comments after the ``---`` marker is +for a ``diffstat``, to show what files have changed, and the number of +inserted and deleted lines per file. A ``diffstat`` is especially useful +on bigger patches. If you are going to include a ``diffstat`` after the +``---`` marker, please use ``diffstat`` options ``-p 1 -w 70`` so that +filenames are listed from the top of the kernel source tree and don't +use too much horizontal space (easily fit in 80 columns, maybe with some +indentation). (``git`` generates appropriate diffstats by default.) + +Other comments relevant only to the moment or the maintainer, not +suitable for the permanent changelog, should also go here. A good +example of such comments might be ``patch changelogs`` which describe +what has changed between the v1 and v2 version of the patch. + +Please put this information **after** the ``---`` line which separates +the changelog from the rest of the patch. The version information is +not part of the changelog which gets committed to the git tree. It is +additional information for the reviewers. If it's placed above the +commit tags, it needs manual interaction to remove it. If it is below +the separator line, it gets automatically stripped off when applying the +patch:: + + <commit message> + ... + Signed-off-by: Author <author@mail> + --- + V2 -> V3: Removed redundant helper function + V1 -> V2: Cleaned up coding style and addressed review comments + + path/to/file | 5+++-- + ... + +See more details on the proper patch format in the following +references. + +.. _backtraces: + +Backtraces in commit messages +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Backtraces help document the call chain leading to a problem. However, +not all backtraces are helpful. For example, early boot call chains are +unique and obvious. Copying the full dmesg output verbatim, however, +adds distracting information like timestamps, module lists, register and +stack dumps. + +Therefore, the most useful backtraces should distill the relevant +information from the dump, which makes it easier to focus on the real +issue. Here is an example of a well-trimmed backtrace:: + + unchecked MSR access error: WRMSR to 0xd51 (tried to write 0x0000000000000064) + at rIP: 0xffffffffae059994 (native_write_msr+0x4/0x20) + Call Trace: + mba_wrmsr + update_domains + rdtgroup_mkdir + +.. _explicit_in_reply_to: + +Explicit In-Reply-To headers +---------------------------- + +It can be helpful to manually add In-Reply-To: headers to a patch +(e.g., when using ``git send-email``) to associate the patch with +previous relevant discussion, e.g. to link a bug fix to the email with +the bug report. However, for a multi-patch series, it is generally +best to avoid using In-Reply-To: to link to older versions of the +series. This way multiple versions of the patch don't become an +unmanageable forest of references in email clients. If a link is +helpful, you can use the https://lore.kernel.org/ redirector (e.g., in +the cover email text) to link to an earlier version of the patch series. + + +Providing base tree information +------------------------------- + +When other developers receive your patches and start the review process, +it is often useful for them to know where in the tree history they +should place your work. This is particularly useful for automated CI +processes that attempt to run a series of tests in order to establish +the quality of your submission before the maintainer starts the review. + +If you are using ``git format-patch`` to generate your patches, you can +automatically include the base tree information in your submission by +using the ``--base`` flag. The easiest and most convenient way to use +this option is with topical branches:: + + $ git checkout -t -b my-topical-branch master + Branch 'my-topical-branch' set up to track local branch 'master'. + Switched to a new branch 'my-topical-branch' + + [perform your edits and commits] + + $ git format-patch --base=auto --cover-letter -o outgoing/ master + outgoing/0000-cover-letter.patch + outgoing/0001-First-Commit.patch + outgoing/... + +When you open ``outgoing/0000-cover-letter.patch`` for editing, you will +notice that it will have the ``base-commit:`` trailer at the very +bottom, which provides the reviewer and the CI tools enough information +to properly perform ``git am`` without worrying about conflicts:: + + $ git checkout -b patch-review [base-commit-id] + Switched to a new branch 'patch-review' + $ git am patches.mbox + Applying: First Commit + Applying: ... + +Please see ``man git-format-patch`` for more information about this +option. + +.. note:: + + The ``--base`` feature was introduced in git version 2.9.0. + +If you are not using git to format your patches, you can still include +the same ``base-commit`` trailer to indicate the commit hash of the tree +on which your work is based. You should add it either in the cover +letter or in the first patch of the series and it should be placed +either below the ``---`` line or at the very bottom of all other +content, right before your email signature. + + +References +---------- + +Andrew Morton, "The perfect patch" (tpp). + <https://www.ozlabs.org/~akpm/stuff/tpp.txt> + +Jeff Garzik, "Linux kernel patch submission format". + <https://web.archive.org/web/20180829112450/http://linux.yyz.us/patch-format.html> + +Greg Kroah-Hartman, "How to piss off a kernel subsystem maintainer". + <http://www.kroah.com/log/linux/maintainer.html> + + <http://www.kroah.com/log/linux/maintainer-02.html> + + <http://www.kroah.com/log/linux/maintainer-03.html> + + <http://www.kroah.com/log/linux/maintainer-04.html> + + <http://www.kroah.com/log/linux/maintainer-05.html> + + <http://www.kroah.com/log/linux/maintainer-06.html> + +NO!!!! No more huge patch bombs to linux-kernel@vger.kernel.org people! + <https://lore.kernel.org/r/20050711.125305.08322243.davem@davemloft.net> + +Kernel Documentation/process/coding-style.rst + +Linus Torvalds's mail on the canonical patch format: + <https://lore.kernel.org/r/Pine.LNX.4.58.0504071023190.28951@ppc970.osdl.org> + +Andi Kleen, "On submitting kernel patches" + Some strategies to get difficult or controversial changes in. + + http://halobates.de/on-submitting-patches.pdf |