diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/scsi/hptiop.rst | 215 |
1 files changed, 215 insertions, 0 deletions
diff --git a/Documentation/scsi/hptiop.rst b/Documentation/scsi/hptiop.rst new file mode 100644 index 0000000000..23ae7ae369 --- /dev/null +++ b/Documentation/scsi/hptiop.rst @@ -0,0 +1,215 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: <isonum.txt> + +====================================================== +Highpoint RocketRAID 3xxx/4xxx Adapter Driver (hptiop) +====================================================== + +Controller Register Map +----------------------- + +For RR44xx Intel IOP based adapters, the controller IOP is accessed via PCI BAR0 and BAR2 + + ============== ================================== + BAR0 offset Register + ============== ================================== + 0x11C5C Link Interface IRQ Set + 0x11C60 Link Interface IRQ Clear + ============== ================================== + + ============== ================================== + BAR2 offset Register + ============== ================================== + 0x10 Inbound Message Register 0 + 0x14 Inbound Message Register 1 + 0x18 Outbound Message Register 0 + 0x1C Outbound Message Register 1 + 0x20 Inbound Doorbell Register + 0x24 Inbound Interrupt Status Register + 0x28 Inbound Interrupt Mask Register + 0x30 Outbound Interrupt Status Register + 0x34 Outbound Interrupt Mask Register + 0x40 Inbound Queue Port + 0x44 Outbound Queue Port + ============== ================================== + +For Intel IOP based adapters, the controller IOP is accessed via PCI BAR0: + + ============== ================================== + BAR0 offset Register + ============== ================================== + 0x10 Inbound Message Register 0 + 0x14 Inbound Message Register 1 + 0x18 Outbound Message Register 0 + 0x1C Outbound Message Register 1 + 0x20 Inbound Doorbell Register + 0x24 Inbound Interrupt Status Register + 0x28 Inbound Interrupt Mask Register + 0x30 Outbound Interrupt Status Register + 0x34 Outbound Interrupt Mask Register + 0x40 Inbound Queue Port + 0x44 Outbound Queue Port + ============== ================================== + +For Marvell not Frey IOP based adapters, the IOP is accessed via PCI BAR0 and BAR1: + + ============== ================================== + BAR0 offset Register + ============== ================================== + 0x20400 Inbound Doorbell Register + 0x20404 Inbound Interrupt Mask Register + 0x20408 Outbound Doorbell Register + 0x2040C Outbound Interrupt Mask Register + ============== ================================== + + ============== ================================== + BAR1 offset Register + ============== ================================== + 0x0 Inbound Queue Head Pointer + 0x4 Inbound Queue Tail Pointer + 0x8 Outbound Queue Head Pointer + 0xC Outbound Queue Tail Pointer + 0x10 Inbound Message Register + 0x14 Outbound Message Register + 0x40-0x1040 Inbound Queue + 0x1040-0x2040 Outbound Queue + ============== ================================== + +For Marvell Frey IOP based adapters, the IOP is accessed via PCI BAR0 and BAR1: + + ============== ================================== + BAR0 offset Register + ============== ================================== + 0x0 IOP configuration information. + ============== ================================== + + ============== =================================================== + BAR1 offset Register + ============== =================================================== + 0x4000 Inbound List Base Address Low + 0x4004 Inbound List Base Address High + 0x4018 Inbound List Write Pointer + 0x402C Inbound List Configuration and Control + 0x4050 Outbound List Base Address Low + 0x4054 Outbound List Base Address High + 0x4058 Outbound List Copy Pointer Shadow Base Address Low + 0x405C Outbound List Copy Pointer Shadow Base Address High + 0x4088 Outbound List Interrupt Cause + 0x408C Outbound List Interrupt Enable + 0x1020C PCIe Function 0 Interrupt Enable + 0x10400 PCIe Function 0 to CPU Message A + 0x10420 CPU to PCIe Function 0 Message A + 0x10480 CPU to PCIe Function 0 Doorbell + 0x10484 CPU to PCIe Function 0 Doorbell Enable + ============== =================================================== + + +I/O Request Workflow of Not Marvell Frey +---------------------------------------- + +All queued requests are handled via inbound/outbound queue port. +A request packet can be allocated in either IOP or host memory. + +To send a request to the controller: + + - Get a free request packet by reading the inbound queue port or + allocate a free request in host DMA coherent memory. + + The value returned from the inbound queue port is an offset + relative to the IOP BAR0. + + Requests allocated in host memory must be aligned on 32-bytes boundary. + + - Fill the packet. + + - Post the packet to IOP by writing it to inbound queue. For requests + allocated in IOP memory, write the offset to inbound queue port. For + requests allocated in host memory, write (0x80000000|(bus_addr>>5)) + to the inbound queue port. + + - The IOP process the request. When the request is completed, it + will be put into outbound queue. An outbound interrupt will be + generated. + + For requests allocated in IOP memory, the request offset is posted to + outbound queue. + + For requests allocated in host memory, (0x80000000|(bus_addr>>5)) + is posted to the outbound queue. If IOP_REQUEST_FLAG_OUTPUT_CONTEXT + flag is set in the request, the low 32-bit context value will be + posted instead. + + - The host read the outbound queue and complete the request. + + For requests allocated in IOP memory, the host driver free the request + by writing it to the outbound queue. + +Non-queued requests (reset/flush etc) can be sent via inbound message +register 0. An outbound message with the same value indicates the completion +of an inbound message. + + +I/O Request Workflow of Marvell Frey +------------------------------------ + +All queued requests are handled via inbound/outbound list. + +To send a request to the controller: + + - Allocate a free request in host DMA coherent memory. + + Requests allocated in host memory must be aligned on 32-bytes boundary. + + - Fill the request with index of the request in the flag. + + Fill a free inbound list unit with the physical address and the size of + the request. + + Set up the inbound list write pointer with the index of previous unit, + round to 0 if the index reaches the supported count of requests. + + - Post the inbound list writer pointer to IOP. + + - The IOP process the request. When the request is completed, the flag of + the request with or-ed IOPMU_QUEUE_MASK_HOST_BITS will be put into a + free outbound list unit and the index of the outbound list unit will be + put into the copy pointer shadow register. An outbound interrupt will be + generated. + + - The host read the outbound list copy pointer shadow register and compare + with previous saved read pointer N. If they are different, the host will + read the (N+1)th outbound list unit. + + The host get the index of the request from the (N+1)th outbound list + unit and complete the request. + +Non-queued requests (reset communication/reset/flush etc) can be sent via PCIe +Function 0 to CPU Message A register. The CPU to PCIe Function 0 Message register +with the same value indicates the completion of message. + + +User-level Interface +--------------------- + +The driver exposes following sysfs attributes: + + ================== === ======================== + NAME R/W Description + ================== === ======================== + driver-version R driver version string + firmware-version R firmware version string + ================== === ======================== + + +----------------------------------------------------------------------------- + +Copyright |copy| 2006-2012 HighPoint Technologies, Inc. All Rights Reserved. + + This file is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + linux@highpoint-tech.com + + http://www.highpoint-tech.com |