diff options
Diffstat (limited to 'Documentation/wmi/acpi-interface.rst')
| -rw-r--r-- | Documentation/wmi/acpi-interface.rst | 96 |
1 files changed, 96 insertions, 0 deletions
diff --git a/Documentation/wmi/acpi-interface.rst b/Documentation/wmi/acpi-interface.rst new file mode 100644 index 0000000000..d31af0ed9c --- /dev/null +++ b/Documentation/wmi/acpi-interface.rst @@ -0,0 +1,96 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +================== +ACPI WMI interface +================== + +The ACPI WMI interface is a proprietary extension of the ACPI specification made +by Microsoft to allow hardware vendors to embed WMI (Windows Management Instrumentation) +objects inside their ACPI firmware. Typical functions implemented over ACPI WMI +are hotkey events on modern notebooks and configuration of BIOS options. + +PNP0C14 ACPI device +------------------- + +Discovery of WMI objects is handled by defining ACPI devices with a PNP ID +of ``PNP0C14``. These devices will contain a set of ACPI buffers and methods +used for mapping and execution of WMI methods and/or queries. If there exist +multiple of such devices, then each device is required to have a +unique ACPI UID. + +_WDG buffer +----------- + +The ``_WDG`` buffer is used to discover WMI objects and is required to be +static. Its internal structure consists of data blocks with a size of 20 bytes, +containing the following data: + +======= =============== ===================================================== +Offset Size (in bytes) Content +======= =============== ===================================================== +0x00 16 128 bit Variant 2 object GUID. +0x10 2 2 character method ID or single byte notification ID. +0x12 1 Object instance count. +0x13 1 Object flags. +======= =============== ===================================================== + +The WMI object flags control whether the method or notification ID is used: + +- 0x1: Data block usage is expensive and must be explicitly enabled/disabled. +- 0x2: Data block contains WMI methods. +- 0x4: Data block contains ASCIZ string. +- 0x8: Data block describes a WMI event, use notification ID instead + of method ID. + +Each WMI object GUID can appear multiple times inside a system. +The method/notification ID is used to construct the ACPI method names used for +interacting with the WMI object. + +WQxx ACPI methods +----------------- + +If a data block does not contain WMI methods, then its content can be retrieved +by this required ACPI method. The last two characters of the ACPI method name +are the method ID of the data block to query. Their single parameter is an +integer describing the instance which should be queried. This parameter can be +omitted if the data block contains only a single instance. + +WSxx ACPI methods +----------------- + +Similar to the ``WQxx`` ACPI methods, except that it is optional and takes an +additional buffer as its second argument. The instance argument also cannot +be omitted. + +WMxx ACPI methods +----------------- + +Used for executing WMI methods associated with a data block. The last two +characters of the ACPI method name are the method ID of the data block +containing the WMI methods. Their first parameter is a integer describing the +instance which methods should be executed. The second parameter is an integer +describing the WMI method ID to execute, and the third parameter is a buffer +containing the WMI method parameters. If the data block is marked as containing +an ASCIZ string, then this buffer should contain an ASCIZ string. The ACPI +method will return the result of the executed WMI method. + +WExx ACPI methods +----------------- + +Used for optionally enabling/disabling WMI events, the last two characters of +the ACPI method are the notification ID of the data block describing the WMI +event as hexadecimal value. Their first parameter is an integer with a value +of 0 if the WMI event should be disabled, other values will enable +the WMI event. + +WCxx ACPI methods +----------------- +Similar to the ``WExx`` ACPI methods, except that it controls data collection +instead of events and thus the last two characters of the ACPI method name are +the method ID of the data block to enable/disable. + +_WED ACPI method +---------------- + +Used to retrieve additional WMI event data, its single parameter is a integer +holding the notification ID of the event. |