diff options
Diffstat (limited to 'Documentation')
20 files changed, 181 insertions, 145 deletions
diff --git a/Documentation/devicetree/bindings/dma/fsl,edma.yaml b/Documentation/devicetree/bindings/dma/fsl,edma.yaml index aa51d278cb..83e77ee489 100644 --- a/Documentation/devicetree/bindings/dma/fsl,edma.yaml +++ b/Documentation/devicetree/bindings/dma/fsl,edma.yaml @@ -48,8 +48,8 @@ properties: - 3 dma-channels: - minItems: 1 - maxItems: 64 + minimum: 1 + maximum: 64 clocks: minItems: 1 diff --git a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml index b1c13bab24..b2d19cfb87 100644 --- a/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/atmel,at91sam-i2c.yaml @@ -77,7 +77,7 @@ required: - clocks allOf: - - $ref: i2c-controller.yaml + - $ref: /schemas/i2c/i2c-controller.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml b/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml index ab151c9db2..580003cdff 100644 --- a/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml +++ b/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml @@ -21,7 +21,7 @@ description: | google,cros-ec-spi or google,cros-ec-i2c. allOf: - - $ref: i2c-controller.yaml# + - $ref: /schemas/i2c/i2c-controller.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml index 3d49d21ad3..e1f450b80d 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml @@ -28,6 +28,9 @@ properties: reg: maxItems: 1 + clocks: + maxItems: 1 + dmas: maxItems: 1 @@ -48,6 +51,7 @@ required: - compatible - dmas - reg + - clocks additionalProperties: false @@ -58,6 +62,7 @@ examples: reg = <0x44a00000 0x10000>; dmas = <&rx_dma 0>; dma-names = "rx"; + clocks = <&axi_clk>; #io-backend-cells = <0>; }; ... diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml index cf456f8d9d..c87677f5e2 100644 --- a/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml @@ -37,15 +37,15 @@ properties: active low. maxItems: 1 - dovdd-supply: + DOVDD-supply: description: Definition of the regulator used as interface power supply. - avdd-supply: + AVDD-supply: description: Definition of the regulator used as analog power supply. - dvdd-supply: + DVDD-supply: description: Definition of the regulator used as digital power supply. @@ -59,9 +59,9 @@ required: - reg - clocks - clock-names - - dovdd-supply - - avdd-supply - - dvdd-supply + - DOVDD-supply + - AVDD-supply + - DVDD-supply - reset-gpios - port @@ -82,9 +82,9 @@ examples: clock-names = "xvclk"; reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; - dovdd-supply = <&sw2_reg>; - dvdd-supply = <&sw2_reg>; - avdd-supply = <®_peri_3p15v>; + DOVDD-supply = <&sw2_reg>; + DVDD-supply = <&sw2_reg>; + AVDD-supply = <®_peri_3p15v>; port { ov2680_to_mipi: endpoint { diff --git a/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml b/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml index b6a7cb32f6..835b6db00c 100644 --- a/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml +++ b/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml @@ -77,6 +77,9 @@ properties: vpcie12v-supply: description: The 12v regulator to use for PCIe. + iommu-map: true + iommu-map-mask: true + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml index 531008f0b6..002b728cbc 100644 --- a/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml @@ -37,6 +37,7 @@ properties: description: This property is needed if using 24MHz OSC for RC's PHY. ep-gpios: + maxItems: 1 description: pre-reset GPIO vpcie12v-supply: diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml index ba966a78a1..7543456862 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml @@ -198,7 +198,6 @@ allOf: enum: - qcom,sm8550-qmp-gen4x2-pcie-phy - qcom,sm8650-qmp-gen4x2-pcie-phy - - qcom,x1e80100-qmp-gen3x2-pcie-phy - qcom,x1e80100-qmp-gen4x2-pcie-phy then: properties: diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml index 91a6cc38ff..c4c4fb38c5 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml @@ -71,7 +71,6 @@ required: - reg - clocks - clock-names - - power-domains - resets - reset-names - vdda-phy-supply @@ -127,6 +126,21 @@ allOf: - const: ref - const: qref + - if: + properties: + compatible: + contains: + enum: + - qcom,msm8996-qmp-ufs-phy + - qcom,msm8998-qmp-ufs-phy + then: + properties: + power-domains: + false + else: + required: + - power-domains + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml index 0f200e3f97..fce7f8a19e 100644 --- a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml @@ -15,9 +15,6 @@ description: | properties: compatible: oneOf: - - enum: - - qcom,sc8180x-usb-hs-phy - - qcom,usb-snps-femto-v2-phy - items: - enum: - qcom,sa8775p-usb-hs-phy @@ -26,6 +23,7 @@ properties: - items: - enum: - qcom,sc7280-usb-hs-phy + - qcom,sc8180x-usb-hs-phy - qcom,sdx55-usb-hs-phy - qcom,sdx65-usb-hs-phy - qcom,sm6375-usb-hs-phy diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml index bd72a326e6..60f30a59f3 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml @@ -97,7 +97,8 @@ patternProperties: then: properties: groups: - enum: [emmc, emmc_rst] + items: + enum: [emmc, emmc_rst] - if: properties: function: @@ -105,8 +106,9 @@ patternProperties: then: properties: groups: - enum: [esw, esw_p0_p1, esw_p2_p3_p4, rgmii_via_esw, - rgmii_via_gmac1, rgmii_via_gmac2, mdc_mdio] + items: + enum: [esw, esw_p0_p1, esw_p2_p3_p4, rgmii_via_esw, + rgmii_via_gmac1, rgmii_via_gmac2, mdc_mdio] - if: properties: function: @@ -123,10 +125,11 @@ patternProperties: then: properties: groups: - enum: [i2s_in_mclk_bclk_ws, i2s1_in_data, i2s2_in_data, - i2s3_in_data, i2s4_in_data, i2s_out_mclk_bclk_ws, - i2s1_out_data, i2s2_out_data, i2s3_out_data, - i2s4_out_data] + items: + enum: [i2s_in_mclk_bclk_ws, i2s1_in_data, i2s2_in_data, + i2s3_in_data, i2s4_in_data, i2s_out_mclk_bclk_ws, + i2s1_out_data, i2s2_out_data, i2s3_out_data, + i2s4_out_data] - if: properties: function: @@ -159,10 +162,11 @@ patternProperties: then: properties: groups: - enum: [pcie0_0_waken, pcie0_1_waken, pcie1_0_waken, - pcie0_0_clkreq, pcie0_1_clkreq, pcie1_0_clkreq, - pcie0_pad_perst, pcie1_pad_perst, pcie_pereset, - pcie_wake, pcie_clkreq] + items: + enum: [pcie0_0_waken, pcie0_1_waken, pcie1_0_waken, + pcie0_0_clkreq, pcie0_1_clkreq, pcie1_0_clkreq, + pcie0_pad_perst, pcie1_pad_perst, pcie_pereset, + pcie_wake, pcie_clkreq] - if: properties: function: @@ -178,11 +182,12 @@ patternProperties: then: properties: groups: - enum: [pwm_ch1_0, pwm_ch1_1, pwm_ch1_2, pwm_ch2_0, pwm_ch2_1, - pwm_ch2_2, pwm_ch3_0, pwm_ch3_1, pwm_ch3_2, pwm_ch4_0, - pwm_ch4_1, pwm_ch4_2, pwm_ch4_3, pwm_ch5_0, pwm_ch5_1, - pwm_ch5_2, pwm_ch6_0, pwm_ch6_1, pwm_ch6_2, pwm_ch6_3, - pwm_ch7_0, pwm_0, pwm_1] + items: + enum: [pwm_ch1_0, pwm_ch1_1, pwm_ch1_2, pwm_ch2_0, pwm_ch2_1, + pwm_ch2_2, pwm_ch3_0, pwm_ch3_1, pwm_ch3_2, pwm_ch4_0, + pwm_ch4_1, pwm_ch4_2, pwm_ch4_3, pwm_ch5_0, pwm_ch5_1, + pwm_ch5_2, pwm_ch6_0, pwm_ch6_1, pwm_ch6_2, pwm_ch6_3, + pwm_ch7_0, pwm_0, pwm_1] - if: properties: function: @@ -260,33 +265,34 @@ patternProperties: pins: description: An array of strings. Each string contains the name of a pin. - enum: [GPIO_A, I2S1_IN, I2S1_OUT, I2S_BCLK, I2S_WS, I2S_MCLK, TXD0, - RXD0, SPI_WP, SPI_HOLD, SPI_CLK, SPI_MOSI, SPI_MISO, SPI_CS, - I2C_SDA, I2C_SCL, I2S2_IN, I2S3_IN, I2S4_IN, I2S2_OUT, - I2S3_OUT, I2S4_OUT, GPIO_B, MDC, MDIO, G2_TXD0, G2_TXD1, - G2_TXD2, G2_TXD3, G2_TXEN, G2_TXC, G2_RXD0, G2_RXD1, G2_RXD2, - G2_RXD3, G2_RXDV, G2_RXC, NCEB, NWEB, NREB, NDL4, NDL5, NDL6, - NDL7, NRB, NCLE, NALE, NDL0, NDL1, NDL2, NDL3, MDI_TP_P0, - MDI_TN_P0, MDI_RP_P0, MDI_RN_P0, MDI_TP_P1, MDI_TN_P1, - MDI_RP_P1, MDI_RN_P1, MDI_RP_P2, MDI_RN_P2, MDI_TP_P2, - MDI_TN_P2, MDI_TP_P3, MDI_TN_P3, MDI_RP_P3, MDI_RN_P3, - MDI_RP_P4, MDI_RN_P4, MDI_TP_P4, MDI_TN_P4, PMIC_SCL, - PMIC_SDA, SPIC1_CLK, SPIC1_MOSI, SPIC1_MISO, SPIC1_CS, - GPIO_D, WATCHDOG, RTS3_N, CTS3_N, TXD3, RXD3, PERST0_N, - PERST1_N, WLED_N, EPHY_LED0_N, AUXIN0, AUXIN1, AUXIN2, - AUXIN3, TXD4, RXD4, RTS4_N, CST4_N, PWM1, PWM2, PWM3, PWM4, - PWM5, PWM6, PWM7, GPIO_E, TOP_5G_CLK, TOP_5G_DATA, - WF0_5G_HB0, WF0_5G_HB1, WF0_5G_HB2, WF0_5G_HB3, WF0_5G_HB4, - WF0_5G_HB5, WF0_5G_HB6, XO_REQ, TOP_RST_N, SYS_WATCHDOG, - EPHY_LED0_N_JTDO, EPHY_LED1_N_JTDI, EPHY_LED2_N_JTMS, - EPHY_LED3_N_JTCLK, EPHY_LED4_N_JTRST_N, WF2G_LED_N, - WF5G_LED_N, GPIO_9, GPIO_10, GPIO_11, GPIO_12, UART1_TXD, - UART1_RXD, UART1_CTS, UART1_RTS, UART2_TXD, UART2_RXD, - UART2_CTS, UART2_RTS, SMI_MDC, SMI_MDIO, PCIE_PERESET_N, - PWM_0, GPIO_0, GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5, - GPIO_6, GPIO_7, GPIO_8, UART0_TXD, UART0_RXD, TOP_2G_CLK, - TOP_2G_DATA, WF0_2G_HB0, WF0_2G_HB1, WF0_2G_HB2, WF0_2G_HB3, - WF0_2G_HB4, WF0_2G_HB5, WF0_2G_HB6] + items: + enum: [GPIO_A, I2S1_IN, I2S1_OUT, I2S_BCLK, I2S_WS, I2S_MCLK, TXD0, + RXD0, SPI_WP, SPI_HOLD, SPI_CLK, SPI_MOSI, SPI_MISO, SPI_CS, + I2C_SDA, I2C_SCL, I2S2_IN, I2S3_IN, I2S4_IN, I2S2_OUT, + I2S3_OUT, I2S4_OUT, GPIO_B, MDC, MDIO, G2_TXD0, G2_TXD1, + G2_TXD2, G2_TXD3, G2_TXEN, G2_TXC, G2_RXD0, G2_RXD1, G2_RXD2, + G2_RXD3, G2_RXDV, G2_RXC, NCEB, NWEB, NREB, NDL4, NDL5, NDL6, + NDL7, NRB, NCLE, NALE, NDL0, NDL1, NDL2, NDL3, MDI_TP_P0, + MDI_TN_P0, MDI_RP_P0, MDI_RN_P0, MDI_TP_P1, MDI_TN_P1, + MDI_RP_P1, MDI_RN_P1, MDI_RP_P2, MDI_RN_P2, MDI_TP_P2, + MDI_TN_P2, MDI_TP_P3, MDI_TN_P3, MDI_RP_P3, MDI_RN_P3, + MDI_RP_P4, MDI_RN_P4, MDI_TP_P4, MDI_TN_P4, PMIC_SCL, + PMIC_SDA, SPIC1_CLK, SPIC1_MOSI, SPIC1_MISO, SPIC1_CS, + GPIO_D, WATCHDOG, RTS3_N, CTS3_N, TXD3, RXD3, PERST0_N, + PERST1_N, WLED_N, EPHY_LED0_N, AUXIN0, AUXIN1, AUXIN2, + AUXIN3, TXD4, RXD4, RTS4_N, CST4_N, PWM1, PWM2, PWM3, PWM4, + PWM5, PWM6, PWM7, GPIO_E, TOP_5G_CLK, TOP_5G_DATA, + WF0_5G_HB0, WF0_5G_HB1, WF0_5G_HB2, WF0_5G_HB3, WF0_5G_HB4, + WF0_5G_HB5, WF0_5G_HB6, XO_REQ, TOP_RST_N, SYS_WATCHDOG, + EPHY_LED0_N_JTDO, EPHY_LED1_N_JTDI, EPHY_LED2_N_JTMS, + EPHY_LED3_N_JTCLK, EPHY_LED4_N_JTRST_N, WF2G_LED_N, + WF5G_LED_N, GPIO_9, GPIO_10, GPIO_11, GPIO_12, UART1_TXD, + UART1_RXD, UART1_CTS, UART1_RTS, UART2_TXD, UART2_RXD, + UART2_CTS, UART2_RTS, SMI_MDC, SMI_MDIO, PCIE_PERESET_N, + PWM_0, GPIO_0, GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5, + GPIO_6, GPIO_7, GPIO_8, UART0_TXD, UART0_RXD, TOP_2G_CLK, + TOP_2G_DATA, WF0_2G_HB0, WF0_2G_HB1, WF0_2G_HB2, WF0_2G_HB3, + WF0_2G_HB4, WF0_2G_HB5, WF0_2G_HB6] bias-disable: true diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml index bb675c8ec2..1b941b276b 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml @@ -72,40 +72,24 @@ $defs: description: Specify the alternative function to be configured for the specified pins. - enum: [ gpio, atest_char, atest_char0, atest_char1, atest_char2, - atest_char3, atest_usb0, atest_usb00, atest_usb01, atest_usb02, - atest_usb03, audio_ref, cam_mclk, cci_async, cci_i2c, - cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, - cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, coex_uart1, cri_trng, - cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, - dp0_hot, gcc_gp1, gcc_gp2, gcc_gp3, host2wlan_sol, ibi_i3c, - jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2, - mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws, - mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, mi2s_mclk0, - mi2s_mclk1, nav_gpio0, nav_gpio1, nav_gpio2, pcie0_clk, - phase_flag0, phase_flag1, phase_flag10, phase_flag11, - phase_flag12, phase_flag13, phase_flag14, phase_flag15, - phase_flag16, phase_flag17, phase_flag18, phase_flag19, - phase_flag2, phase_flag20, phase_flag21, phase_flag22, - phase_flag23, phase_flag24, phase_flag25, phase_flag26, - phase_flag27, phase_flag28, phase_flag29, phase_flag3, - phase_flag30, phase_flag31, phase_flag4, phase_flag5, - phase_flag6, phase_flag7, phase_flag8, phase_flag9, - pll_bist, pll_clk, prng_rosc0, prng_rosc1, prng_rosc2, - prng_rosc3, qdss_cti, qdss_gpio, qdss_gpio0, qdss_gpio1, - qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14, - qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, - qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable, - qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request, - qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss, - qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4, qup0_se5, - qup0_se6, qup0_se7, qup1_se0, qup1_se1, qup1_se2, qup1_se3, - qup1_se4, qup1_se5, qup1_se6, sd_write, tb_trig, tgu_ch0, - tgu_ch1, tgu_ch2, tgu_ch3, tmess_prng0, tmess_prng1, - tmess_prng2, tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk, - uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data, - uim1_present, uim1_reset, usb0_hs, usb0_phy, vfr_0, vfr_1, - vsense_trigger ] + enum: [ gpio, atest_char, atest_usb0, audio_ref_clk, cam_mclk, + cci_async_in0, cci_i2c, cci, cmu_rng, coex_uart1_rx, + coex_uart1_tx, cri_trng, dbg_out_clk, ddr_bist, + ddr_pxi0_test, ddr_pxi1_test, gcc_gp1_clk, gcc_gp2_clk, + gcc_gp3_clk, host2wlan_sol, ibi_i3c_qup0, ibi_i3c_qup1, + jitter_bist_ref, mdp_vsync0_out, mdp_vsync1_out, + mdp_vsync2_out, mdp_vsync3_out, mdp_vsync, nav, + pcie0_clk_req, phase_flag, pll_bist_sync, pll_clk_aux, + prng_rosc, qdss_cti_trig0, qdss_cti_trig1, qdss_gpio, + qlink0_enable, qlink0_request, qlink0_wmss_reset, + qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4, + qup1_se0, qup1_se1, qup1_se2, qup1_se2_l2, qup1_se3, + qup1_se4, sd_write_protect, tb_trig_sdc1, tb_trig_sdc2, + tgu_ch0_trigout, tgu_ch1_trigout, tgu_ch2_trigout, + tgu_ch3_trigout, tmess_prng, tsense_pwm1_out, + tsense_pwm2_out, uim0, uim1, usb0_hs_ac, usb0_phy_ps, + vfr_0_mira, vfr_0_mirb, vfr_1, vsense_trigger_mirnat, + wlan1_adc_dtest0, wlan1_adc_dtest1 ] required: - pins diff --git a/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml b/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml index b634f57cd0..ca81c8afba 100644 --- a/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml @@ -18,13 +18,15 @@ properties: oneOf: - enum: - loongson,ls2k1000-thermal + - loongson,ls2k2000-thermal - items: - enum: - - loongson,ls2k2000-thermal + - loongson,ls2k0500-thermal - const: loongson,ls2k1000-thermal reg: - maxItems: 1 + minItems: 1 + maxItems: 2 interrupts: maxItems: 1 @@ -38,6 +40,24 @@ required: - interrupts - '#thermal-sensor-cells' +if: + properties: + compatible: + contains: + enum: + - loongson,ls2k2000-thermal + +then: + properties: + reg: + minItems: 2 + maxItems: 2 + +else: + properties: + reg: + maxItems: 1 + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml b/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml index 0874fc21f6..6577a61cc0 100644 --- a/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml +++ b/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml @@ -65,6 +65,7 @@ patternProperties: description: The hard wired USB devices type: object $ref: /schemas/usb/usb-device.yaml + additionalProperties: true required: - peer-hub diff --git a/Documentation/driver-api/fpga/fpga-bridge.rst b/Documentation/driver-api/fpga/fpga-bridge.rst index 6042085340..833f68fb07 100644 --- a/Documentation/driver-api/fpga/fpga-bridge.rst +++ b/Documentation/driver-api/fpga/fpga-bridge.rst @@ -6,9 +6,12 @@ API to implement a new FPGA bridge * struct fpga_bridge - The FPGA Bridge structure * struct fpga_bridge_ops - Low level Bridge driver ops -* fpga_bridge_register() - Create and register a bridge +* __fpga_bridge_register() - Create and register a bridge * fpga_bridge_unregister() - Unregister a bridge +The helper macro ``fpga_bridge_register()`` automatically sets +the module that registers the FPGA bridge as the owner. + .. kernel-doc:: include/linux/fpga/fpga-bridge.h :functions: fpga_bridge @@ -16,7 +19,7 @@ API to implement a new FPGA bridge :functions: fpga_bridge_ops .. kernel-doc:: drivers/fpga/fpga-bridge.c - :functions: fpga_bridge_register + :functions: __fpga_bridge_register .. kernel-doc:: drivers/fpga/fpga-bridge.c :functions: fpga_bridge_unregister diff --git a/Documentation/driver-api/fpga/fpga-mgr.rst b/Documentation/driver-api/fpga/fpga-mgr.rst index 49c0a95126..8d2b79f696 100644 --- a/Documentation/driver-api/fpga/fpga-mgr.rst +++ b/Documentation/driver-api/fpga/fpga-mgr.rst @@ -24,7 +24,8 @@ How to support a new FPGA device -------------------------------- To add another FPGA manager, write a driver that implements a set of ops. The -probe function calls fpga_mgr_register() or fpga_mgr_register_full(), such as:: +probe function calls ``fpga_mgr_register()`` or ``fpga_mgr_register_full()``, +such as:: static const struct fpga_manager_ops socfpga_fpga_ops = { .write_init = socfpga_fpga_ops_configure_init, @@ -69,10 +70,11 @@ probe function calls fpga_mgr_register() or fpga_mgr_register_full(), such as:: } Alternatively, the probe function could call one of the resource managed -register functions, devm_fpga_mgr_register() or devm_fpga_mgr_register_full(). -When these functions are used, the parameter syntax is the same, but the call -to fpga_mgr_unregister() should be removed. In the above example, the -socfpga_fpga_remove() function would not be required. +register functions, ``devm_fpga_mgr_register()`` or +``devm_fpga_mgr_register_full()``. When these functions are used, the +parameter syntax is the same, but the call to ``fpga_mgr_unregister()`` should be +removed. In the above example, the ``socfpga_fpga_remove()`` function would not be +required. The ops will implement whatever device specific register writes are needed to do the programming sequence for this particular FPGA. These ops return 0 for @@ -125,15 +127,19 @@ API for implementing a new FPGA Manager driver * struct fpga_manager - the FPGA manager struct * struct fpga_manager_ops - Low level FPGA manager driver ops * struct fpga_manager_info - Parameter structure for fpga_mgr_register_full() -* fpga_mgr_register_full() - Create and register an FPGA manager using the +* __fpga_mgr_register_full() - Create and register an FPGA manager using the fpga_mgr_info structure to provide the full flexibility of options -* fpga_mgr_register() - Create and register an FPGA manager using standard +* __fpga_mgr_register() - Create and register an FPGA manager using standard arguments -* devm_fpga_mgr_register_full() - Resource managed version of - fpga_mgr_register_full() -* devm_fpga_mgr_register() - Resource managed version of fpga_mgr_register() +* __devm_fpga_mgr_register_full() - Resource managed version of + __fpga_mgr_register_full() +* __devm_fpga_mgr_register() - Resource managed version of __fpga_mgr_register() * fpga_mgr_unregister() - Unregister an FPGA manager +Helper macros ``fpga_mgr_register_full()``, ``fpga_mgr_register()``, +``devm_fpga_mgr_register_full()``, and ``devm_fpga_mgr_register()`` are available +to ease the registration. + .. kernel-doc:: include/linux/fpga/fpga-mgr.h :functions: fpga_mgr_states @@ -147,16 +153,16 @@ API for implementing a new FPGA Manager driver :functions: fpga_manager_info .. kernel-doc:: drivers/fpga/fpga-mgr.c - :functions: fpga_mgr_register_full + :functions: __fpga_mgr_register_full .. kernel-doc:: drivers/fpga/fpga-mgr.c - :functions: fpga_mgr_register + :functions: __fpga_mgr_register .. kernel-doc:: drivers/fpga/fpga-mgr.c - :functions: devm_fpga_mgr_register_full + :functions: __devm_fpga_mgr_register_full .. kernel-doc:: drivers/fpga/fpga-mgr.c - :functions: devm_fpga_mgr_register + :functions: __devm_fpga_mgr_register .. kernel-doc:: drivers/fpga/fpga-mgr.c :functions: fpga_mgr_unregister diff --git a/Documentation/driver-api/fpga/fpga-region.rst b/Documentation/driver-api/fpga/fpga-region.rst index dc55d60a0b..2d03b5fb76 100644 --- a/Documentation/driver-api/fpga/fpga-region.rst +++ b/Documentation/driver-api/fpga/fpga-region.rst @@ -46,13 +46,16 @@ API to add a new FPGA region ---------------------------- * struct fpga_region - The FPGA region struct -* struct fpga_region_info - Parameter structure for fpga_region_register_full() -* fpga_region_register_full() - Create and register an FPGA region using the +* struct fpga_region_info - Parameter structure for __fpga_region_register_full() +* __fpga_region_register_full() - Create and register an FPGA region using the fpga_region_info structure to provide the full flexibility of options -* fpga_region_register() - Create and register an FPGA region using standard +* __fpga_region_register() - Create and register an FPGA region using standard arguments * fpga_region_unregister() - Unregister an FPGA region +Helper macros ``fpga_region_register()`` and ``fpga_region_register_full()`` +automatically set the module that registers the FPGA region as the owner. + The FPGA region's probe function will need to get a reference to the FPGA Manager it will be using to do the programming. This usually would happen during the region's probe function. @@ -82,10 +85,10 @@ following APIs to handle building or tearing down that list. :functions: fpga_region_info .. kernel-doc:: drivers/fpga/fpga-region.c - :functions: fpga_region_register_full + :functions: __fpga_region_register_full .. kernel-doc:: drivers/fpga/fpga-region.c - :functions: fpga_region_register + :functions: __fpga_region_register .. kernel-doc:: drivers/fpga/fpga-region.c :functions: fpga_region_unregister diff --git a/Documentation/iio/adis16475.rst b/Documentation/iio/adis16475.rst index 91cabb7d8d..130f9e97cc 100644 --- a/Documentation/iio/adis16475.rst +++ b/Documentation/iio/adis16475.rst @@ -66,11 +66,9 @@ specific device folder path ``/sys/bus/iio/devices/iio:deviceX``. +-------------------------------------------+----------------------------------------------------------+ | in_accel_x_calibbias | Calibration offset for the X-axis accelerometer channel. | +-------------------------------------------+----------------------------------------------------------+ -| in_accel_calibbias_x | x-axis acceleration offset correction | -+-------------------------------------------+----------------------------------------------------------+ | in_accel_x_raw | Raw X-axis accelerometer channel value. | +-------------------------------------------+----------------------------------------------------------+ -| in_accel_calibbias_y | y-axis acceleration offset correction | +| in_accel_y_calibbias | Calibration offset for the Y-axis accelerometer channel. | +-------------------------------------------+----------------------------------------------------------+ | in_accel_y_raw | Raw Y-axis accelerometer channel value. | +-------------------------------------------+----------------------------------------------------------+ @@ -94,11 +92,9 @@ specific device folder path ``/sys/bus/iio/devices/iio:deviceX``. +---------------------------------------+------------------------------------------------------+ | in_anglvel_x_calibbias | Calibration offset for the X-axis gyroscope channel. | +---------------------------------------+------------------------------------------------------+ -| in_anglvel_calibbias_x | x-axis gyroscope offset correction | -+---------------------------------------+------------------------------------------------------+ | in_anglvel_x_raw | Raw X-axis gyroscope channel value. | +---------------------------------------+------------------------------------------------------+ -| in_anglvel_calibbias_y | y-axis gyroscope offset correction | +| in_anglvel_y_calibbias | Calibration offset for the Y-axis gyroscope channel. | +---------------------------------------+------------------------------------------------------+ | in_anglvel_y_raw | Raw Y-axis gyroscope channel value. | +---------------------------------------+------------------------------------------------------+ diff --git a/Documentation/mm/arch_pgtable_helpers.rst b/Documentation/mm/arch_pgtable_helpers.rst index 2466d3363a..ad50ca6f49 100644 --- a/Documentation/mm/arch_pgtable_helpers.rst +++ b/Documentation/mm/arch_pgtable_helpers.rst @@ -140,7 +140,8 @@ PMD Page Table Helpers +---------------------------+--------------------------------------------------+ | pmd_swp_clear_soft_dirty | Clears a soft dirty swapped PMD | +---------------------------+--------------------------------------------------+ -| pmd_mkinvalid | Invalidates a mapped PMD [1] | +| pmd_mkinvalid | Invalidates a present PMD; do not call for | +| | non-present PMD [1] | +---------------------------+--------------------------------------------------+ | pmd_set_huge | Creates a PMD huge mapping | +---------------------------+--------------------------------------------------+ @@ -196,7 +197,8 @@ PUD Page Table Helpers +---------------------------+--------------------------------------------------+ | pud_mkdevmap | Creates a ZONE_DEVICE mapped PUD | +---------------------------+--------------------------------------------------+ -| pud_mkinvalid | Invalidates a mapped PUD [1] | +| pud_mkinvalid | Invalidates a present PUD; do not call for | +| | non-present PUD [1] | +---------------------------+--------------------------------------------------+ | pud_set_huge | Creates a PUD huge mapping | +---------------------------+--------------------------------------------------+ diff --git a/Documentation/networking/af_xdp.rst b/Documentation/networking/af_xdp.rst index 72da7057e4..dceeb0d763 100644 --- a/Documentation/networking/af_xdp.rst +++ b/Documentation/networking/af_xdp.rst @@ -329,24 +329,23 @@ XDP_SHARED_UMEM option and provide the initial socket's fd in the sxdp_shared_umem_fd field as you registered the UMEM on that socket. These two sockets will now share one and the same UMEM. -In this case, it is possible to use the NIC's packet steering -capabilities to steer the packets to the right queue. This is not -possible in the previous example as there is only one queue shared -among sockets, so the NIC cannot do this steering as it can only steer -between queues. - -In libxdp (or libbpf prior to version 1.0), you need to use the -xsk_socket__create_shared() API as it takes a reference to a FILL ring -and a COMPLETION ring that will be created for you and bound to the -shared UMEM. You can use this function for all the sockets you create, -or you can use it for the second and following ones and use -xsk_socket__create() for the first one. Both methods yield the same -result. +There is no need to supply an XDP program like the one in the previous +case where sockets were bound to the same queue id and +device. Instead, use the NIC's packet steering capabilities to steer +the packets to the right queue. In the previous example, there is only +one queue shared among sockets, so the NIC cannot do this steering. It +can only steer between queues. + +In libbpf, you need to use the xsk_socket__create_shared() API as it +takes a reference to a FILL ring and a COMPLETION ring that will be +created for you and bound to the shared UMEM. You can use this +function for all the sockets you create, or you can use it for the +second and following ones and use xsk_socket__create() for the first +one. Both methods yield the same result. Note that a UMEM can be shared between sockets on the same queue id and device, as well as between queues on the same device and between -devices at the same time. It is also possible to redirect to any -socket as long as it is bound to the same umem with XDP_SHARED_UMEM. +devices at the same time. XDP_USE_NEED_WAKEUP bind flag ----------------------------- @@ -823,10 +822,6 @@ A: The short answer is no, that is not supported at the moment. The switch, or other distribution mechanism, in your NIC to direct traffic to the correct queue id and socket. - Note that if you are using the XDP_SHARED_UMEM option, it is - possible to switch traffic between any socket bound to the same - umem. - Q: My packets are sometimes corrupted. What is wrong? A: Care has to be taken not to feed the same buffer in the UMEM into |