diff options
Diffstat (limited to 'arch/alpha/lib')
49 files changed, 7142 insertions, 0 deletions
diff --git a/arch/alpha/lib/Makefile b/arch/alpha/lib/Makefile new file mode 100644 index 0000000000..1cc74f7b50 --- /dev/null +++ b/arch/alpha/lib/Makefile @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for alpha-specific library files.. +# + +asflags-y := $(KBUILD_CFLAGS) +ccflags-y := -Werror + +# Many of these routines have implementations tuned for ev6. +# Choose them iff we're targeting ev6 specifically. +ev6-$(CONFIG_ALPHA_EV6) := ev6- + +# Several make use of the cttz instruction introduced in ev67. +ev67-$(CONFIG_ALPHA_EV67) := ev67- + +lib-y = __divqu.o __remqu.o __divlu.o __remlu.o \ + udiv-qrnnd.o \ + udelay.o \ + $(ev6-y)memset.o \ + $(ev6-y)memcpy.o \ + memmove.o \ + checksum.o \ + csum_partial_copy.o \ + $(ev67-y)strlen.o \ + stycpy.o \ + styncpy.o \ + $(ev67-y)strchr.o \ + $(ev67-y)strrchr.o \ + $(ev6-y)memchr.o \ + $(ev6-y)copy_user.o \ + $(ev6-y)clear_user.o \ + $(ev6-y)csum_ipv6_magic.o \ + $(ev6-y)clear_page.o \ + $(ev6-y)copy_page.o \ + fpreg.o \ + callback_srm.o srm_puts.o srm_printk.o \ + fls.o + +# The division routines are built from single source, with different defines. +AFLAGS___divqu.o = -DDIV +AFLAGS___remqu.o = -DREM +AFLAGS___divlu.o = -DDIV -DINTSIZE +AFLAGS___remlu.o = -DREM -DINTSIZE + +$(addprefix $(obj)/,__divqu.o __remqu.o __divlu.o __remlu.o): \ + $(src)/$(ev6-y)divide.S FORCE + $(call if_changed_rule,as_o_S) + +# There are direct branches between {str*cpy,str*cat} and stx*cpy. +# Ensure the branches are within range by merging these objects. + +LDFLAGS_stycpy.o := -r +LDFLAGS_styncpy.o := -r + +$(obj)/stycpy.o: $(obj)/strcpy.o $(obj)/$(ev67-y)strcat.o \ + $(obj)/$(ev6-y)stxcpy.o FORCE + $(call if_changed,ld) + +$(obj)/styncpy.o: $(obj)/strncpy.o $(obj)/$(ev67-y)strncat.o \ + $(obj)/$(ev6-y)stxncpy.o FORCE + $(call if_changed,ld) diff --git a/arch/alpha/lib/callback_srm.S b/arch/alpha/lib/callback_srm.S new file mode 100644 index 0000000000..36b63f2951 --- /dev/null +++ b/arch/alpha/lib/callback_srm.S @@ -0,0 +1,109 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/alpha/lib/callback_srm.S + */ + +#include <linux/export.h> +#include <asm/console.h> + +.text +#define HWRPB_CRB_OFFSET 0xc0 + +#if defined(CONFIG_ALPHA_SRM) || defined(CONFIG_ALPHA_GENERIC) +.align 4 +srm_dispatch: +#if defined(CONFIG_ALPHA_GENERIC) + ldl $4,alpha_using_srm + beq $4,nosrm +#endif + ldq $0,hwrpb # gp is set up by CALLBACK macro. + ldl $25,0($25) # Pick up the wrapper data. + mov $20,$21 # Shift arguments right. + mov $19,$20 + ldq $1,HWRPB_CRB_OFFSET($0) + mov $18,$19 + mov $17,$18 + mov $16,$17 + addq $0,$1,$2 # CRB address + ldq $27,0($2) # DISPATCH procedure descriptor (VMS call std) + extwl $25,0,$16 # SRM callback function code + ldq $3,8($27) # call address + extwl $25,2,$25 # argument information (VMS calling std) + jmp ($3) # Return directly to caller of wrapper. + +.align 4 +.globl srm_fixup +.ent srm_fixup +srm_fixup: + ldgp $29,0($27) +#if defined(CONFIG_ALPHA_GENERIC) + ldl $4,alpha_using_srm + beq $4,nosrm +#endif + ldq $0,hwrpb + ldq $1,HWRPB_CRB_OFFSET($0) + addq $0,$1,$2 # CRB address + ldq $27,16($2) # VA of FIXUP procedure descriptor + ldq $3,8($27) # call address + lda $25,2($31) # two integer arguments + jmp ($3) # Return directly to caller of srm_fixup. +.end srm_fixup + +#if defined(CONFIG_ALPHA_GENERIC) +.align 3 +nosrm: + lda $0,-1($31) + ret +#endif + +#define CALLBACK(NAME, CODE, ARG_CNT) \ +.align 4; .globl callback_##NAME; .ent callback_##NAME; callback_##NAME##: \ +ldgp $29,0($27); br $25,srm_dispatch; .word CODE, ARG_CNT; .end callback_##NAME + +#else /* defined(CONFIG_ALPHA_SRM) || defined(CONFIG_ALPHA_GENERIC) */ + +#define CALLBACK(NAME, CODE, ARG_CNT) \ +.align 3; .globl callback_##NAME; .ent callback_##NAME; callback_##NAME##: \ +lda $0,-1($31); ret; .end callback_##NAME + +.align 3 +.globl srm_fixup +.ent srm_fixup +srm_fixup: + lda $0,-1($31) + ret +.end srm_fixup +#endif /* defined(CONFIG_ALPHA_SRM) || defined(CONFIG_ALPHA_GENERIC) */ + +CALLBACK(puts, CCB_PUTS, 4) +CALLBACK(open, CCB_OPEN, 3) +CALLBACK(close, CCB_CLOSE, 2) +CALLBACK(read, CCB_READ, 5) +CALLBACK(open_console, CCB_OPEN_CONSOLE, 1) +CALLBACK(close_console, CCB_CLOSE_CONSOLE, 1) +CALLBACK(getenv, CCB_GET_ENV, 4) +CALLBACK(setenv, CCB_SET_ENV, 4) +CALLBACK(getc, CCB_GETC, 2) +CALLBACK(reset_term, CCB_RESET_TERM, 2) +CALLBACK(term_int, CCB_SET_TERM_INT, 3) +CALLBACK(term_ctl, CCB_SET_TERM_CTL, 3) +CALLBACK(process_keycode, CCB_PROCESS_KEYCODE, 3) +CALLBACK(ioctl, CCB_IOCTL, 6) +CALLBACK(write, CCB_WRITE, 5) +CALLBACK(reset_env, CCB_RESET_ENV, 4) +CALLBACK(save_env, CCB_SAVE_ENV, 1) +CALLBACK(pswitch, CCB_PSWITCH, 3) +CALLBACK(bios_emul, CCB_BIOS_EMUL, 5) + +EXPORT_SYMBOL(callback_getenv) +EXPORT_SYMBOL(callback_setenv) +EXPORT_SYMBOL(callback_save_env) + +.data +__alpha_using_srm: # For use by bootpheader + .long 7 # value is not 1 for link debugging + .weak alpha_using_srm; alpha_using_srm = __alpha_using_srm +__callback_init_done: # For use by bootpheader + .long 7 # value is not 1 for link debugging + .weak callback_init_done; callback_init_done = __callback_init_done + diff --git a/arch/alpha/lib/checksum.c b/arch/alpha/lib/checksum.c new file mode 100644 index 0000000000..3f35c3ed69 --- /dev/null +++ b/arch/alpha/lib/checksum.c @@ -0,0 +1,184 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * arch/alpha/lib/checksum.c + * + * This file contains network checksum routines that are better done + * in an architecture-specific manner due to speed.. + * Comments in other versions indicate that the algorithms are from RFC1071 + * + * accelerated versions (and 21264 assembly versions ) contributed by + * Rick Gorton <rick.gorton@alpha-processor.com> + */ + +#include <linux/module.h> +#include <linux/string.h> + +#include <asm/byteorder.h> + +static inline unsigned short from64to16(unsigned long x) +{ + /* Using extract instructions is a bit more efficient + than the original shift/bitmask version. */ + + union { + unsigned long ul; + unsigned int ui[2]; + unsigned short us[4]; + } in_v, tmp_v, out_v; + + in_v.ul = x; + tmp_v.ul = (unsigned long) in_v.ui[0] + (unsigned long) in_v.ui[1]; + + /* Since the bits of tmp_v.sh[3] are going to always be zero, + we don't have to bother to add that in. */ + out_v.ul = (unsigned long) tmp_v.us[0] + (unsigned long) tmp_v.us[1] + + (unsigned long) tmp_v.us[2]; + + /* Similarly, out_v.us[2] is always zero for the final add. */ + return out_v.us[0] + out_v.us[1]; +} + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented. + */ +__sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, + __u32 len, __u8 proto, __wsum sum) +{ + return (__force __sum16)~from64to16( + (__force u64)saddr + (__force u64)daddr + + (__force u64)sum + ((len + proto) << 8)); +} +EXPORT_SYMBOL(csum_tcpudp_magic); + +__wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, + __u32 len, __u8 proto, __wsum sum) +{ + unsigned long result; + + result = (__force u64)saddr + (__force u64)daddr + + (__force u64)sum + ((len + proto) << 8); + + /* Fold down to 32-bits so we don't lose in the typedef-less + network stack. */ + /* 64 to 33 */ + result = (result & 0xffffffff) + (result >> 32); + /* 33 to 32 */ + result = (result & 0xffffffff) + (result >> 32); + return (__force __wsum)result; +} +EXPORT_SYMBOL(csum_tcpudp_nofold); + +/* + * Do a 64-bit checksum on an arbitrary memory area.. + * + * This isn't a great routine, but it's not _horrible_ either. The + * inner loop could be unrolled a bit further, and there are better + * ways to do the carry, but this is reasonable. + */ +static inline unsigned long do_csum(const unsigned char * buff, int len) +{ + int odd, count; + unsigned long result = 0; + + if (len <= 0) + goto out; + odd = 1 & (unsigned long) buff; + if (odd) { + result = *buff << 8; + len--; + buff++; + } + count = len >> 1; /* nr of 16-bit words.. */ + if (count) { + if (2 & (unsigned long) buff) { + result += *(unsigned short *) buff; + count--; + len -= 2; + buff += 2; + } + count >>= 1; /* nr of 32-bit words.. */ + if (count) { + if (4 & (unsigned long) buff) { + result += *(unsigned int *) buff; + count--; + len -= 4; + buff += 4; + } + count >>= 1; /* nr of 64-bit words.. */ + if (count) { + unsigned long carry = 0; + do { + unsigned long w = *(unsigned long *) buff; + count--; + buff += 8; + result += carry; + result += w; + carry = (w > result); + } while (count); + result += carry; + result = (result & 0xffffffff) + (result >> 32); + } + if (len & 4) { + result += *(unsigned int *) buff; + buff += 4; + } + } + if (len & 2) { + result += *(unsigned short *) buff; + buff += 2; + } + } + if (len & 1) + result += *buff; + result = from64to16(result); + if (odd) + result = ((result >> 8) & 0xff) | ((result & 0xff) << 8); +out: + return result; +} + +/* + * This is a version of ip_compute_csum() optimized for IP headers, + * which always checksum on 4 octet boundaries. + */ +__sum16 ip_fast_csum(const void *iph, unsigned int ihl) +{ + return (__force __sum16)~do_csum(iph,ihl*4); +} +EXPORT_SYMBOL(ip_fast_csum); + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +__wsum csum_partial(const void *buff, int len, __wsum sum) +{ + unsigned long result = do_csum(buff, len); + + /* add in old sum, and carry.. */ + result += (__force u32)sum; + /* 32+c bits -> 32 bits */ + result = (result & 0xffffffff) + (result >> 32); + return (__force __wsum)result; +} + +EXPORT_SYMBOL(csum_partial); + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ +__sum16 ip_compute_csum(const void *buff, int len) +{ + return (__force __sum16)~from64to16(do_csum(buff,len)); +} +EXPORT_SYMBOL(ip_compute_csum); diff --git a/arch/alpha/lib/clear_page.S b/arch/alpha/lib/clear_page.S new file mode 100644 index 0000000000..af70ee309a --- /dev/null +++ b/arch/alpha/lib/clear_page.S @@ -0,0 +1,41 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/alpha/lib/clear_page.S + * + * Zero an entire page. + */ +#include <linux/export.h> + .text + .align 4 + .global clear_page + .ent clear_page +clear_page: + .prologue 0 + + lda $0,128 + nop + unop + nop + +1: stq $31,0($16) + stq $31,8($16) + stq $31,16($16) + stq $31,24($16) + + stq $31,32($16) + stq $31,40($16) + stq $31,48($16) + subq $0,1,$0 + + stq $31,56($16) + addq $16,64,$16 + unop + bne $0,1b + + ret + nop + unop + nop + + .end clear_page + EXPORT_SYMBOL(clear_page) diff --git a/arch/alpha/lib/clear_user.S b/arch/alpha/lib/clear_user.S new file mode 100644 index 0000000000..848eb60a00 --- /dev/null +++ b/arch/alpha/lib/clear_user.S @@ -0,0 +1,102 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/alpha/lib/clear_user.S + * Contributed by Richard Henderson <rth@tamu.edu> + * + * Zero user space, handling exceptions as we go. + * + * We have to make sure that $0 is always up-to-date and contains the + * right "bytes left to zero" value (and that it is updated only _after_ + * a successful copy). There is also some rather minor exception setup + * stuff. + */ +#include <linux/export.h> + +/* Allow an exception for an insn; exit if we get one. */ +#define EX(x,y...) \ + 99: x,##y; \ + .section __ex_table,"a"; \ + .long 99b - .; \ + lda $31, $exception-99b($31); \ + .previous + + .set noat + .set noreorder + .align 4 + + .globl __clear_user + .ent __clear_user + .frame $30, 0, $26 + .prologue 0 + +$loop: + and $1, 3, $4 # e0 : + beq $4, 1f # .. e1 : + +0: EX( stq_u $31, 0($16) ) # e0 : zero one word + subq $0, 8, $0 # .. e1 : + subq $4, 1, $4 # e0 : + addq $16, 8, $16 # .. e1 : + bne $4, 0b # e1 : + unop # : + +1: bic $1, 3, $1 # e0 : + beq $1, $tail # .. e1 : + +2: EX( stq_u $31, 0($16) ) # e0 : zero four words + subq $0, 8, $0 # .. e1 : + EX( stq_u $31, 8($16) ) # e0 : + subq $0, 8, $0 # .. e1 : + EX( stq_u $31, 16($16) ) # e0 : + subq $0, 8, $0 # .. e1 : + EX( stq_u $31, 24($16) ) # e0 : + subq $0, 8, $0 # .. e1 : + subq $1, 4, $1 # e0 : + addq $16, 32, $16 # .. e1 : + bne $1, 2b # e1 : + +$tail: + bne $2, 1f # e1 : is there a tail to do? + ret $31, ($26), 1 # .. e1 : + +1: EX( ldq_u $5, 0($16) ) # e0 : + clr $0 # .. e1 : + nop # e1 : + mskqh $5, $0, $5 # e0 : + EX( stq_u $5, 0($16) ) # e0 : + ret $31, ($26), 1 # .. e1 : + +__clear_user: + and $17, $17, $0 + and $16, 7, $4 # e0 : find dest misalignment + beq $0, $zerolength # .. e1 : + addq $0, $4, $1 # e0 : bias counter + and $1, 7, $2 # e1 : number of bytes in tail + srl $1, 3, $1 # e0 : + beq $4, $loop # .. e1 : + + EX( ldq_u $5, 0($16) ) # e0 : load dst word to mask back in + beq $1, $oneword # .. e1 : sub-word store? + + mskql $5, $16, $5 # e0 : take care of misaligned head + addq $16, 8, $16 # .. e1 : + EX( stq_u $5, -8($16) ) # e0 : + addq $0, $4, $0 # .. e1 : bytes left -= 8 - misalignment + subq $1, 1, $1 # e0 : + subq $0, 8, $0 # .. e1 : + br $loop # e1 : + unop # : + +$oneword: + mskql $5, $16, $4 # e0 : + mskqh $5, $2, $5 # e0 : + or $5, $4, $5 # e1 : + EX( stq_u $5, 0($16) ) # e0 : + clr $0 # .. e1 : + +$zerolength: +$exception: + ret $31, ($26), 1 # .. e1 : + + .end __clear_user + EXPORT_SYMBOL(__clear_user) diff --git a/arch/alpha/lib/copy_page.S b/arch/alpha/lib/copy_page.S new file mode 100644 index 0000000000..1c444fdad9 --- /dev/null +++ b/arch/alpha/lib/copy_page.S @@ -0,0 +1,51 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/alpha/lib/copy_page.S + * + * Copy an entire page. + */ +#include <linux/export.h> + .text + .align 4 + .global copy_page + .ent copy_page +copy_page: + .prologue 0 + + lda $18,128 + nop + unop + nop + +1: ldq $0,0($17) + ldq $1,8($17) + ldq $2,16($17) + ldq $3,24($17) + + ldq $4,32($17) + ldq $5,40($17) + ldq $6,48($17) + ldq $7,56($17) + + stq $0,0($16) + subq $18,1,$18 + stq $1,8($16) + addq $17,64,$17 + + stq $2,16($16) + stq $3,24($16) + stq $4,32($16) + stq $5,40($16) + + stq $6,48($16) + stq $7,56($16) + addq $16,64,$16 + bne $18, 1b + + ret + nop + unop + nop + + .end copy_page + EXPORT_SYMBOL(copy_page) diff --git a/arch/alpha/lib/copy_user.S b/arch/alpha/lib/copy_user.S new file mode 100644 index 0000000000..ef18faafca --- /dev/null +++ b/arch/alpha/lib/copy_user.S @@ -0,0 +1,121 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/alpha/lib/copy_user.S + * + * Copy to/from user space, handling exceptions as we go.. This + * isn't exactly pretty. + * + * This is essentially the same as "memcpy()", but with a few twists. + * Notably, we have to make sure that $0 is always up-to-date and + * contains the right "bytes left to copy" value (and that it is updated + * only _after_ a successful copy). There is also some rather minor + * exception setup stuff.. + */ + +#include <linux/export.h> + +/* Allow an exception for an insn; exit if we get one. */ +#define EXI(x,y...) \ + 99: x,##y; \ + .section __ex_table,"a"; \ + .long 99b - .; \ + lda $31, $exitin-99b($31); \ + .previous + +#define EXO(x,y...) \ + 99: x,##y; \ + .section __ex_table,"a"; \ + .long 99b - .; \ + lda $31, $exitout-99b($31); \ + .previous + + .set noat + .align 4 + .globl __copy_user + .ent __copy_user +__copy_user: + .prologue 0 + mov $18,$0 + and $16,7,$3 + beq $0,$35 + beq $3,$36 + subq $3,8,$3 + .align 4 +$37: + EXI( ldq_u $1,0($17) ) + EXO( ldq_u $2,0($16) ) + extbl $1,$17,$1 + mskbl $2,$16,$2 + insbl $1,$16,$1 + addq $3,1,$3 + bis $1,$2,$1 + EXO( stq_u $1,0($16) ) + subq $0,1,$0 + addq $16,1,$16 + addq $17,1,$17 + beq $0,$41 + bne $3,$37 +$36: + and $17,7,$1 + bic $0,7,$4 + beq $1,$43 + beq $4,$48 + EXI( ldq_u $3,0($17) ) + .align 4 +$50: + EXI( ldq_u $2,8($17) ) + subq $4,8,$4 + extql $3,$17,$3 + extqh $2,$17,$1 + bis $3,$1,$1 + EXO( stq $1,0($16) ) + addq $17,8,$17 + subq $0,8,$0 + addq $16,8,$16 + bis $2,$2,$3 + bne $4,$50 +$48: + beq $0,$41 + .align 4 +$57: + EXI( ldq_u $1,0($17) ) + EXO( ldq_u $2,0($16) ) + extbl $1,$17,$1 + mskbl $2,$16,$2 + insbl $1,$16,$1 + bis $1,$2,$1 + EXO( stq_u $1,0($16) ) + subq $0,1,$0 + addq $16,1,$16 + addq $17,1,$17 + bne $0,$57 + br $31,$41 + .align 4 +$43: + beq $4,$65 + .align 4 +$66: + EXI( ldq $1,0($17) ) + subq $4,8,$4 + EXO( stq $1,0($16) ) + addq $17,8,$17 + subq $0,8,$0 + addq $16,8,$16 + bne $4,$66 +$65: + beq $0,$41 + EXI( ldq $2,0($17) ) + EXO( ldq $1,0($16) ) + mskql $2,$0,$2 + mskqh $1,$0,$1 + bis $2,$1,$2 + EXO( stq $2,0($16) ) + bis $31,$31,$0 +$41: +$35: +$exitin: +$exitout: + ret $31,($26),1 + + .end __copy_user +EXPORT_SYMBOL(__copy_user) diff --git a/arch/alpha/lib/csum_ipv6_magic.S b/arch/alpha/lib/csum_ipv6_magic.S new file mode 100644 index 0000000000..273c426c38 --- /dev/null +++ b/arch/alpha/lib/csum_ipv6_magic.S @@ -0,0 +1,118 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/alpha/lib/csum_ipv6_magic.S + * Contributed by Richard Henderson <rth@tamu.edu> + * + * unsigned short csum_ipv6_magic(struct in6_addr *saddr, + * struct in6_addr *daddr, + * __u32 len, + * unsigned short proto, + * unsigned int csum); + * + * Misalignment handling (which costs 16 instructions / 8 cycles) + * added by Ivan Kokshaysky <ink@jurassic.park.msu.ru> + */ + +#include <linux/export.h> + .globl csum_ipv6_magic + .align 4 + .ent csum_ipv6_magic + .frame $30,0,$26,0 +csum_ipv6_magic: + .prologue 0 + + ldq_u $0,0($16) # e0 : load src & dst addr words + zapnot $20,15,$20 # .. e1 : zero extend incoming csum + extqh $18,1,$4 # e0 : byte swap len & proto while we wait + ldq_u $21,7($16) # .. e1 : handle misalignment + + extbl $18,1,$5 # e0 : + ldq_u $1,8($16) # .. e1 : + extbl $18,2,$6 # e0 : + ldq_u $22,15($16) # .. e1 : + + extbl $18,3,$18 # e0 : + ldq_u $2,0($17) # .. e1 : + sra $4,32,$4 # e0 : + ldq_u $23,7($17) # .. e1 : + + extql $0,$16,$0 # e0 : + ldq_u $3,8($17) # .. e1 : + extqh $21,$16,$21 # e0 : + ldq_u $24,15($17) # .. e1 : + + sll $5,16,$5 # e0 : + or $0,$21,$0 # .. e1 : 1st src word complete + extql $1,$16,$1 # e0 : + addq $20,$0,$20 # .. e1 : begin summing the words + + extqh $22,$16,$22 # e0 : + cmpult $20,$0,$0 # .. e1 : + sll $6,8,$6 # e0 : + or $1,$22,$1 # .. e1 : 2nd src word complete + + extql $2,$17,$2 # e0 : + or $4,$18,$18 # .. e1 : + extqh $23,$17,$23 # e0 : + or $5,$6,$5 # .. e1 : + + extql $3,$17,$3 # e0 : + or $2,$23,$2 # .. e1 : 1st dst word complete + extqh $24,$17,$24 # e0 : + or $18,$5,$18 # .. e1 : len complete + + extwh $19,7,$7 # e0 : + or $3,$24,$3 # .. e1 : 2nd dst word complete + extbl $19,1,$19 # e0 : + addq $20,$1,$20 # .. e1 : + + or $19,$7,$19 # e0 : + cmpult $20,$1,$1 # .. e1 : + sll $19,48,$19 # e0 : + nop # .. e0 : + + sra $19,32,$19 # e0 : proto complete + addq $20,$2,$20 # .. e1 : + cmpult $20,$2,$2 # e0 : + addq $20,$3,$20 # .. e1 : + + cmpult $20,$3,$3 # e0 : + addq $20,$18,$20 # .. e1 : + cmpult $20,$18,$18 # e0 : + addq $20,$19,$20 # .. e1 : + + cmpult $20,$19,$19 # e0 : + addq $0,$1,$0 # .. e1 : merge the carries back into the csum + addq $2,$3,$2 # e0 : + addq $18,$19,$18 # .. e1 : + + addq $0,$2,$0 # e0 : + addq $20,$18,$20 # .. e1 : + addq $0,$20,$0 # e0 : + unop # : + + extwl $0,2,$2 # e0 : begin folding the 64-bit value + zapnot $0,3,$3 # .. e1 : + extwl $0,4,$1 # e0 : + addq $2,$3,$3 # .. e1 : + + extwl $0,6,$0 # e0 : + addq $3,$1,$3 # .. e1 : + addq $0,$3,$0 # e0 : + unop # : + + extwl $0,2,$1 # e0 : fold 18-bit value + zapnot $0,3,$0 # .. e1 : + addq $0,$1,$0 # e0 : + unop # : + + extwl $0,2,$1 # e0 : fold 17-bit value + zapnot $0,3,$0 # .. e1 : + addq $0,$1,$0 # e0 : + not $0,$0 # .. e1 : and complement. + + zapnot $0,3,$0 # e0 : + ret # .. e1 : + + .end csum_ipv6_magic + EXPORT_SYMBOL(csum_ipv6_magic) diff --git a/arch/alpha/lib/csum_partial_copy.c b/arch/alpha/lib/csum_partial_copy.c new file mode 100644 index 0000000000..4d180d96f0 --- /dev/null +++ b/arch/alpha/lib/csum_partial_copy.c @@ -0,0 +1,363 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * csum_partial_copy - do IP checksumming and copy + * + * (C) Copyright 1996 Linus Torvalds + * accelerated versions (and 21264 assembly versions ) contributed by + * Rick Gorton <rick.gorton@alpha-processor.com> + * + * Don't look at this too closely - you'll go mad. The things + * we do for performance.. + */ + +#include <linux/types.h> +#include <linux/string.h> +#include <linux/uaccess.h> +#include <net/checksum.h> + + +#define ldq_u(x,y) \ +__asm__ __volatile__("ldq_u %0,%1":"=r" (x):"m" (*(const unsigned long *)(y))) + +#define stq_u(x,y) \ +__asm__ __volatile__("stq_u %1,%0":"=m" (*(unsigned long *)(y)):"r" (x)) + +#define extql(x,y,z) \ +__asm__ __volatile__("extql %1,%2,%0":"=r" (z):"r" (x),"r" (y)) + +#define extqh(x,y,z) \ +__asm__ __volatile__("extqh %1,%2,%0":"=r" (z):"r" (x),"r" (y)) + +#define mskql(x,y,z) \ +__asm__ __volatile__("mskql %1,%2,%0":"=r" (z):"r" (x),"r" (y)) + +#define mskqh(x,y,z) \ +__asm__ __volatile__("mskqh %1,%2,%0":"=r" (z):"r" (x),"r" (y)) + +#define insql(x,y,z) \ +__asm__ __volatile__("insql %1,%2,%0":"=r" (z):"r" (x),"r" (y)) + +#define insqh(x,y,z) \ +__asm__ __volatile__("insqh %1,%2,%0":"=r" (z):"r" (x),"r" (y)) + +#define __get_word(insn,x,ptr) \ +({ \ + long __guu_err; \ + __asm__ __volatile__( \ + "1: "#insn" %0,%2\n" \ + "2:\n" \ + EXC(1b,2b,%0,%1) \ + : "=r"(x), "=r"(__guu_err) \ + : "m"(__m(ptr)), "1"(0)); \ + __guu_err; \ +}) + +static inline unsigned short from64to16(unsigned long x) +{ + /* Using extract instructions is a bit more efficient + than the original shift/bitmask version. */ + + union { + unsigned long ul; + unsigned int ui[2]; + unsigned short us[4]; + } in_v, tmp_v, out_v; + + in_v.ul = x; + tmp_v.ul = (unsigned long) in_v.ui[0] + (unsigned long) in_v.ui[1]; + + /* Since the bits of tmp_v.sh[3] are going to always be zero, + we don't have to bother to add that in. */ + out_v.ul = (unsigned long) tmp_v.us[0] + (unsigned long) tmp_v.us[1] + + (unsigned long) tmp_v.us[2]; + + /* Similarly, out_v.us[2] is always zero for the final add. */ + return out_v.us[0] + out_v.us[1]; +} + + + +/* + * Ok. This isn't fun, but this is the EASY case. + */ +static inline unsigned long +csum_partial_cfu_aligned(const unsigned long __user *src, unsigned long *dst, + long len) +{ + unsigned long checksum = ~0U; + unsigned long carry = 0; + + while (len >= 0) { + unsigned long word; + if (__get_word(ldq, word, src)) + return 0; + checksum += carry; + src++; + checksum += word; + len -= 8; + carry = checksum < word; + *dst = word; + dst++; + } + len += 8; + checksum += carry; + if (len) { + unsigned long word, tmp; + if (__get_word(ldq, word, src)) + return 0; + tmp = *dst; + mskql(word, len, word); + checksum += word; + mskqh(tmp, len, tmp); + carry = checksum < word; + *dst = word | tmp; + checksum += carry; + } + return checksum; +} + +/* + * This is even less fun, but this is still reasonably + * easy. + */ +static inline unsigned long +csum_partial_cfu_dest_aligned(const unsigned long __user *src, + unsigned long *dst, + unsigned long soff, + long len) +{ + unsigned long first; + unsigned long word, carry; + unsigned long lastsrc = 7+len+(unsigned long)src; + unsigned long checksum = ~0U; + + if (__get_word(ldq_u, first,src)) + return 0; + carry = 0; + while (len >= 0) { + unsigned long second; + + if (__get_word(ldq_u, second, src+1)) + return 0; + extql(first, soff, word); + len -= 8; + src++; + extqh(second, soff, first); + checksum += carry; + word |= first; + first = second; + checksum += word; + *dst = word; + dst++; + carry = checksum < word; + } + len += 8; + checksum += carry; + if (len) { + unsigned long tmp; + unsigned long second; + if (__get_word(ldq_u, second, lastsrc)) + return 0; + tmp = *dst; + extql(first, soff, word); + extqh(second, soff, first); + word |= first; + mskql(word, len, word); + checksum += word; + mskqh(tmp, len, tmp); + carry = checksum < word; + *dst = word | tmp; + checksum += carry; + } + return checksum; +} + +/* + * This is slightly less fun than the above.. + */ +static inline unsigned long +csum_partial_cfu_src_aligned(const unsigned long __user *src, + unsigned long *dst, + unsigned long doff, + long len, + unsigned long partial_dest) +{ + unsigned long carry = 0; + unsigned long word; + unsigned long second_dest; + unsigned long checksum = ~0U; + + mskql(partial_dest, doff, partial_dest); + while (len >= 0) { + if (__get_word(ldq, word, src)) + return 0; + len -= 8; + insql(word, doff, second_dest); + checksum += carry; + stq_u(partial_dest | second_dest, dst); + src++; + checksum += word; + insqh(word, doff, partial_dest); + carry = checksum < word; + dst++; + } + len += 8; + if (len) { + checksum += carry; + if (__get_word(ldq, word, src)) + return 0; + mskql(word, len, word); + len -= 8; + checksum += word; + insql(word, doff, second_dest); + len += doff; + carry = checksum < word; + partial_dest |= second_dest; + if (len >= 0) { + stq_u(partial_dest, dst); + if (!len) goto out; + dst++; + insqh(word, doff, partial_dest); + } + doff = len; + } + ldq_u(second_dest, dst); + mskqh(second_dest, doff, second_dest); + stq_u(partial_dest | second_dest, dst); +out: + checksum += carry; + return checksum; +} + +/* + * This is so totally un-fun that it's frightening. Don't + * look at this too closely, you'll go blind. + */ +static inline unsigned long +csum_partial_cfu_unaligned(const unsigned long __user * src, + unsigned long * dst, + unsigned long soff, unsigned long doff, + long len, unsigned long partial_dest) +{ + unsigned long carry = 0; + unsigned long first; + unsigned long lastsrc; + unsigned long checksum = ~0U; + + if (__get_word(ldq_u, first, src)) + return 0; + lastsrc = 7+len+(unsigned long)src; + mskql(partial_dest, doff, partial_dest); + while (len >= 0) { + unsigned long second, word; + unsigned long second_dest; + + if (__get_word(ldq_u, second, src+1)) + return 0; + extql(first, soff, word); + checksum += carry; + len -= 8; + extqh(second, soff, first); + src++; + word |= first; + first = second; + insql(word, doff, second_dest); + checksum += word; + stq_u(partial_dest | second_dest, dst); + carry = checksum < word; + insqh(word, doff, partial_dest); + dst++; + } + len += doff; + checksum += carry; + if (len >= 0) { + unsigned long second, word; + unsigned long second_dest; + + if (__get_word(ldq_u, second, lastsrc)) + return 0; + extql(first, soff, word); + extqh(second, soff, first); + word |= first; + first = second; + mskql(word, len-doff, word); + checksum += word; + insql(word, doff, second_dest); + carry = checksum < word; + stq_u(partial_dest | second_dest, dst); + if (len) { + ldq_u(second_dest, dst+1); + insqh(word, doff, partial_dest); + mskqh(second_dest, len, second_dest); + stq_u(partial_dest | second_dest, dst+1); + } + checksum += carry; + } else { + unsigned long second, word; + unsigned long second_dest; + + if (__get_word(ldq_u, second, lastsrc)) + return 0; + extql(first, soff, word); + extqh(second, soff, first); + word |= first; + ldq_u(second_dest, dst); + mskql(word, len-doff, word); + checksum += word; + mskqh(second_dest, len, second_dest); + carry = checksum < word; + insql(word, doff, word); + stq_u(partial_dest | word | second_dest, dst); + checksum += carry; + } + return checksum; +} + +static __wsum __csum_and_copy(const void __user *src, void *dst, int len) +{ + unsigned long soff = 7 & (unsigned long) src; + unsigned long doff = 7 & (unsigned long) dst; + unsigned long checksum; + + if (!doff) { + if (!soff) + checksum = csum_partial_cfu_aligned( + (const unsigned long __user *) src, + (unsigned long *) dst, len-8); + else + checksum = csum_partial_cfu_dest_aligned( + (const unsigned long __user *) src, + (unsigned long *) dst, + soff, len-8); + } else { + unsigned long partial_dest; + ldq_u(partial_dest, dst); + if (!soff) + checksum = csum_partial_cfu_src_aligned( + (const unsigned long __user *) src, + (unsigned long *) dst, + doff, len-8, partial_dest); + else + checksum = csum_partial_cfu_unaligned( + (const unsigned long __user *) src, + (unsigned long *) dst, + soff, doff, len-8, partial_dest); + } + return (__force __wsum)from64to16 (checksum); +} + +__wsum +csum_and_copy_from_user(const void __user *src, void *dst, int len) +{ + if (!access_ok(src, len)) + return 0; + return __csum_and_copy(src, dst, len); +} + +__wsum +csum_partial_copy_nocheck(const void *src, void *dst, int len) +{ + return __csum_and_copy((__force const void __user *)src, + dst, len); +} +EXPORT_SYMBOL(csum_partial_copy_nocheck); diff --git a/arch/alpha/lib/dbg_current.S b/arch/alpha/lib/dbg_current.S new file mode 100644 index 0000000000..be66121312 --- /dev/null +++ b/arch/alpha/lib/dbg_current.S @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/alpha/lib/dbg_current.S + * Contributed by Richard Henderson (rth@cygnus.com) + * + * Trap if we find current not correct. + */ + +#include <asm/pal.h> + + .text + .set noat + + .globl _mcount + .ent _mcount +_mcount: + .frame $30, 0, $28, 0 + .prologue 0 + + lda $0, -0x4000($30) + cmpult $8, $30, $1 + cmpule $0, $30, $2 + and $1, $2, $3 + bne $3, 1f + + call_pal PAL_bugchk + +1: ret $31, ($28), 1 + + .end _mcount diff --git a/arch/alpha/lib/dbg_stackcheck.S b/arch/alpha/lib/dbg_stackcheck.S new file mode 100644 index 0000000000..b3b6fc94f7 --- /dev/null +++ b/arch/alpha/lib/dbg_stackcheck.S @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/alpha/lib/dbg_stackcheck.S + * Contributed by Richard Henderson (rth@tamu.edu) + * + * Verify that we have not overflowed the stack. Oops if we have. + */ + +#include <asm/asm-offsets.h> + + .text + .set noat + + .align 3 + .globl _mcount + .ent _mcount +_mcount: + .frame $30, 0, $28, 0 + .prologue 0 + + lda $0, TASK_SIZE($8) + cmpult $30, $0, $0 + bne $0, 1f + ret ($28) +1: stq $31, -8($31) # oops me, damn it. + br 1b + + .end _mcount diff --git a/arch/alpha/lib/dbg_stackkill.S b/arch/alpha/lib/dbg_stackkill.S new file mode 100644 index 0000000000..6d9197e52a --- /dev/null +++ b/arch/alpha/lib/dbg_stackkill.S @@ -0,0 +1,36 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/alpha/lib/dbg_stackkill.S + * Contributed by Richard Henderson (rth@cygnus.com) + * + * Clobber the balance of the kernel stack, hoping to catch + * uninitialized local variables in the act. + */ + +#include <asm/asm-offsets.h> + + .text + .set noat + + .align 5 + .globl _mcount + .ent _mcount +_mcount: + .frame $30, 0, $28, 0 + .prologue 0 + + ldi $0, 0xdeadbeef + lda $2, -STACK_SIZE + sll $0, 32, $1 + and $30, $2, $2 + or $0, $1, $0 + lda $2, TASK_SIZE($2) + cmpult $2, $30, $1 + beq $1, 2f +1: stq $0, 0($2) + addq $2, 8, $2 + cmpult $2, $30, $1 + bne $1, 1b +2: ret ($28) + + .end _mcount diff --git a/arch/alpha/lib/divide.S b/arch/alpha/lib/divide.S new file mode 100644 index 0000000000..db01840d76 --- /dev/null +++ b/arch/alpha/lib/divide.S @@ -0,0 +1,199 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/alpha/lib/divide.S + * + * (C) 1995 Linus Torvalds + * + * Alpha division.. + */ + +/* + * The alpha chip doesn't provide hardware division, so we have to do it + * by hand. The compiler expects the functions + * + * __divqu: 64-bit unsigned long divide + * __remqu: 64-bit unsigned long remainder + * __divqs/__remqs: signed 64-bit + * __divlu/__remlu: unsigned 32-bit + * __divls/__remls: signed 32-bit + * + * These are not normal C functions: instead of the normal + * calling sequence, these expect their arguments in registers + * $24 and $25, and return the result in $27. Register $28 may + * be clobbered (assembly temporary), anything else must be saved. + * + * In short: painful. + * + * This is a rather simple bit-at-a-time algorithm: it's very good + * at dividing random 64-bit numbers, but the more usual case where + * the divisor is small is handled better by the DEC algorithm + * using lookup tables. This uses much less memory, though, and is + * nicer on the cache.. Besides, I don't know the copyright status + * of the DEC code. + */ + +/* + * My temporaries: + * $0 - current bit + * $1 - shifted divisor + * $2 - modulus/quotient + * + * $23 - return address + * $24 - dividend + * $25 - divisor + * + * $27 - quotient/modulus + * $28 - compare status + */ + +#include <linux/export.h> +#define halt .long 0 + +/* + * Select function type and registers + */ +#define mask $0 +#define divisor $1 +#define compare $28 +#define tmp1 $3 +#define tmp2 $4 + +#ifdef DIV +#define DIV_ONLY(x,y...) x,##y +#define MOD_ONLY(x,y...) +#define func(x) __div##x +#define modulus $2 +#define quotient $27 +#define GETSIGN(x) xor $24,$25,x +#define STACK 48 +#else +#define DIV_ONLY(x,y...) +#define MOD_ONLY(x,y...) x,##y +#define func(x) __rem##x +#define modulus $27 +#define quotient $2 +#define GETSIGN(x) bis $24,$24,x +#define STACK 32 +#endif + +/* + * For 32-bit operations, we need to extend to 64-bit + */ +#ifdef INTSIZE +#define ufunction func(lu) +#define sfunction func(l) +#define LONGIFY(x) zapnot x,15,x +#define SLONGIFY(x) addl x,0,x +#else +#define ufunction func(qu) +#define sfunction func(q) +#define LONGIFY(x) +#define SLONGIFY(x) +#endif + +.set noat +.align 3 +.globl ufunction +.ent ufunction +ufunction: + subq $30,STACK,$30 + .frame $30,STACK,$23 + .prologue 0 + +7: stq $1, 0($30) + bis $25,$25,divisor + stq $2, 8($30) + bis $24,$24,modulus + stq $0,16($30) + bis $31,$31,quotient + LONGIFY(divisor) + stq tmp1,24($30) + LONGIFY(modulus) + bis $31,1,mask + DIV_ONLY(stq tmp2,32($30)) + beq divisor, 9f /* div by zero */ + +#ifdef INTSIZE + /* + * shift divisor left, using 3-bit shifts for + * 32-bit divides as we can't overflow. Three-bit + * shifts will result in looping three times less + * here, but can result in two loops more later. + * Thus using a large shift isn't worth it (and + * s8add pairs better than a sll..) + */ +1: cmpult divisor,modulus,compare + s8addq divisor,$31,divisor + s8addq mask,$31,mask + bne compare,1b +#else +1: cmpult divisor,modulus,compare + blt divisor, 2f + addq divisor,divisor,divisor + addq mask,mask,mask + bne compare,1b + unop +#endif + + /* ok, start to go right again.. */ +2: DIV_ONLY(addq quotient,mask,tmp2) + srl mask,1,mask + cmpule divisor,modulus,compare + subq modulus,divisor,tmp1 + DIV_ONLY(cmovne compare,tmp2,quotient) + srl divisor,1,divisor + cmovne compare,tmp1,modulus + bne mask,2b + +9: ldq $1, 0($30) + ldq $2, 8($30) + ldq $0,16($30) + ldq tmp1,24($30) + DIV_ONLY(ldq tmp2,32($30)) + addq $30,STACK,$30 + ret $31,($23),1 + .end ufunction +EXPORT_SYMBOL(ufunction) + +/* + * Uhh.. Ugly signed division. I'd rather not have it at all, but + * it's needed in some circumstances. There are different ways to + * handle this, really. This does: + * -a / b = a / -b = -(a / b) + * -a % b = -(a % b) + * a % -b = a % b + * which is probably not the best solution, but at least should + * have the property that (x/y)*y + (x%y) = x. + */ +.align 3 +.globl sfunction +.ent sfunction +sfunction: + subq $30,STACK,$30 + .frame $30,STACK,$23 + .prologue 0 + bis $24,$25,$28 + SLONGIFY($28) + bge $28,7b + stq $24,0($30) + subq $31,$24,$28 + stq $25,8($30) + cmovlt $24,$28,$24 /* abs($24) */ + stq $23,16($30) + subq $31,$25,$28 + stq tmp1,24($30) + cmovlt $25,$28,$25 /* abs($25) */ + unop + bsr $23,ufunction + ldq $24,0($30) + ldq $25,8($30) + GETSIGN($28) + subq $31,$27,tmp1 + SLONGIFY($28) + ldq $23,16($30) + cmovlt $28,tmp1,$27 + ldq tmp1,24($30) + addq $30,STACK,$30 + ret $31,($23),1 + .end sfunction +EXPORT_SYMBOL(sfunction) diff --git a/arch/alpha/lib/ev6-clear_page.S b/arch/alpha/lib/ev6-clear_page.S new file mode 100644 index 0000000000..a534d9ff71 --- /dev/null +++ b/arch/alpha/lib/ev6-clear_page.S @@ -0,0 +1,56 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/alpha/lib/ev6-clear_page.S + * + * Zero an entire page. + */ +#include <linux/export.h> + .text + .align 4 + .global clear_page + .ent clear_page +clear_page: + .prologue 0 + + lda $0,128 + lda $1,125 + addq $16,64,$2 + addq $16,128,$3 + + addq $16,192,$17 + wh64 ($16) + wh64 ($2) + wh64 ($3) + +1: wh64 ($17) + stq $31,0($16) + subq $0,1,$0 + subq $1,1,$1 + + stq $31,8($16) + stq $31,16($16) + addq $17,64,$2 + nop + + stq $31,24($16) + stq $31,32($16) + cmovgt $1,$2,$17 + nop + + stq $31,40($16) + stq $31,48($16) + nop + nop + + stq $31,56($16) + addq $16,64,$16 + nop + bne $0,1b + + ret + nop + nop + nop + + .end clear_page + EXPORT_SYMBOL(clear_page) diff --git a/arch/alpha/lib/ev6-clear_user.S b/arch/alpha/lib/ev6-clear_user.S new file mode 100644 index 0000000000..af776cc45f --- /dev/null +++ b/arch/alpha/lib/ev6-clear_user.S @@ -0,0 +1,213 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/alpha/lib/ev6-clear_user.S + * 21264 version contributed by Rick Gorton <rick.gorton@alpha-processor.com> + * + * Zero user space, handling exceptions as we go. + * + * We have to make sure that $0 is always up-to-date and contains the + * right "bytes left to zero" value (and that it is updated only _after_ + * a successful copy). There is also some rather minor exception setup + * stuff. + * + * Much of the information about 21264 scheduling/coding comes from: + * Compiler Writer's Guide for the Alpha 21264 + * abbreviated as 'CWG' in other comments here + * ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html + * Scheduling notation: + * E - either cluster + * U - upper subcluster; U0 - subcluster U0; U1 - subcluster U1 + * L - lower subcluster; L0 - subcluster L0; L1 - subcluster L1 + * Try not to change the actual algorithm if possible for consistency. + * Determining actual stalls (other than slotting) doesn't appear to be easy to do. + * From perusing the source code context where this routine is called, it is + * a fair assumption that significant fractions of entire pages are zeroed, so + * it's going to be worth the effort to hand-unroll a big loop, and use wh64. + * ASSUMPTION: + * The believed purpose of only updating $0 after a store is that a signal + * may come along during the execution of this chunk of code, and we don't + * want to leave a hole (and we also want to avoid repeating lots of work) + */ + +#include <linux/export.h> +/* Allow an exception for an insn; exit if we get one. */ +#define EX(x,y...) \ + 99: x,##y; \ + .section __ex_table,"a"; \ + .long 99b - .; \ + lda $31, $exception-99b($31); \ + .previous + + .set noat + .set noreorder + .align 4 + + .globl __clear_user + .ent __clear_user + .frame $30, 0, $26 + .prologue 0 + + # Pipeline info : Slotting & Comments +__clear_user: + and $17, $17, $0 + and $16, 7, $4 # .. E .. .. : find dest head misalignment + beq $0, $zerolength # U .. .. .. : U L U L + + addq $0, $4, $1 # .. .. .. E : bias counter + and $1, 7, $2 # .. .. E .. : number of misaligned bytes in tail +# Note - we never actually use $2, so this is a moot computation +# and we can rewrite this later... + srl $1, 3, $1 # .. E .. .. : number of quadwords to clear + beq $4, $headalign # U .. .. .. : U L U L + +/* + * Head is not aligned. Write (8 - $4) bytes to head of destination + * This means $16 is known to be misaligned + */ + EX( ldq_u $5, 0($16) ) # .. .. .. L : load dst word to mask back in + beq $1, $onebyte # .. .. U .. : sub-word store? + mskql $5, $16, $5 # .. U .. .. : take care of misaligned head + addq $16, 8, $16 # E .. .. .. : L U U L + + EX( stq_u $5, -8($16) ) # .. .. .. L : + subq $1, 1, $1 # .. .. E .. : + addq $0, $4, $0 # .. E .. .. : bytes left -= 8 - misalignment + subq $0, 8, $0 # E .. .. .. : U L U L + + .align 4 +/* + * (The .align directive ought to be a moot point) + * values upon initial entry to the loop + * $1 is number of quadwords to clear (zero is a valid value) + * $2 is number of trailing bytes (0..7) ($2 never used...) + * $16 is known to be aligned 0mod8 + */ +$headalign: + subq $1, 16, $4 # .. .. .. E : If < 16, we can not use the huge loop + and $16, 0x3f, $2 # .. .. E .. : Forward work for huge loop + subq $2, 0x40, $3 # .. E .. .. : bias counter (huge loop) + blt $4, $trailquad # U .. .. .. : U L U L + +/* + * We know that we're going to do at least 16 quads, which means we are + * going to be able to use the large block clear loop at least once. + * Figure out how many quads we need to clear before we are 0mod64 aligned + * so we can use the wh64 instruction. + */ + + nop # .. .. .. E + nop # .. .. E .. + nop # .. E .. .. + beq $3, $bigalign # U .. .. .. : U L U L : Aligned 0mod64 + +$alignmod64: + EX( stq_u $31, 0($16) ) # .. .. .. L + addq $3, 8, $3 # .. .. E .. + subq $0, 8, $0 # .. E .. .. + nop # E .. .. .. : U L U L + + nop # .. .. .. E + subq $1, 1, $1 # .. .. E .. + addq $16, 8, $16 # .. E .. .. + blt $3, $alignmod64 # U .. .. .. : U L U L + +$bigalign: +/* + * $0 is the number of bytes left + * $1 is the number of quads left + * $16 is aligned 0mod64 + * we know that we'll be taking a minimum of one trip through + * CWG Section 3.7.6: do not expect a sustained store rate of > 1/cycle + * We are _not_ going to update $0 after every single store. That + * would be silly, because there will be cross-cluster dependencies + * no matter how the code is scheduled. By doing it in slightly + * staggered fashion, we can still do this loop in 5 fetches + * The worse case will be doing two extra quads in some future execution, + * in the event of an interrupted clear. + * Assumes the wh64 needs to be for 2 trips through the loop in the future + * The wh64 is issued on for the starting destination address for trip +2 + * through the loop, and if there are less than two trips left, the target + * address will be for the current trip. + */ + nop # E : + nop # E : + nop # E : + bis $16,$16,$3 # E : U L U L : Initial wh64 address is dest + /* This might actually help for the current trip... */ + +$do_wh64: + wh64 ($3) # .. .. .. L1 : memory subsystem hint + subq $1, 16, $4 # .. .. E .. : Forward calculation - repeat the loop? + EX( stq_u $31, 0($16) ) # .. L .. .. + subq $0, 8, $0 # E .. .. .. : U L U L + + addq $16, 128, $3 # E : Target address of wh64 + EX( stq_u $31, 8($16) ) # L : + EX( stq_u $31, 16($16) ) # L : + subq $0, 16, $0 # E : U L L U + + nop # E : + EX( stq_u $31, 24($16) ) # L : + EX( stq_u $31, 32($16) ) # L : + subq $0, 168, $5 # E : U L L U : two trips through the loop left? + /* 168 = 192 - 24, since we've already completed some stores */ + + subq $0, 16, $0 # E : + EX( stq_u $31, 40($16) ) # L : + EX( stq_u $31, 48($16) ) # L : + cmovlt $5, $16, $3 # E : U L L U : Latency 2, extra mapping cycle + + subq $1, 8, $1 # E : + subq $0, 16, $0 # E : + EX( stq_u $31, 56($16) ) # L : + nop # E : U L U L + + nop # E : + subq $0, 8, $0 # E : + addq $16, 64, $16 # E : + bge $4, $do_wh64 # U : U L U L + +$trailquad: + # zero to 16 quadwords left to store, plus any trailing bytes + # $1 is the number of quadwords left to go. + # + nop # .. .. .. E + nop # .. .. E .. + nop # .. E .. .. + beq $1, $trailbytes # U .. .. .. : U L U L : Only 0..7 bytes to go + +$onequad: + EX( stq_u $31, 0($16) ) # .. .. .. L + subq $1, 1, $1 # .. .. E .. + subq $0, 8, $0 # .. E .. .. + nop # E .. .. .. : U L U L + + nop # .. .. .. E + nop # .. .. E .. + addq $16, 8, $16 # .. E .. .. + bgt $1, $onequad # U .. .. .. : U L U L + + # We have an unknown number of bytes left to go. +$trailbytes: + nop # .. .. .. E + nop # .. .. E .. + nop # .. E .. .. + beq $0, $zerolength # U .. .. .. : U L U L + + # $0 contains the number of bytes left to copy (0..31) + # so we will use $0 as the loop counter + # We know for a fact that $0 > 0 zero due to previous context +$onebyte: + EX( stb $31, 0($16) ) # .. .. .. L + subq $0, 1, $0 # .. .. E .. : + addq $16, 1, $16 # .. E .. .. : + bgt $0, $onebyte # U .. .. .. : U L U L + +$zerolength: +$exception: # Destination for exception recovery(?) + nop # .. .. .. E : + nop # .. .. E .. : + nop # .. E .. .. : + ret $31, ($26), 1 # L0 .. .. .. : L U L U + .end __clear_user + EXPORT_SYMBOL(__clear_user) diff --git a/arch/alpha/lib/ev6-copy_page.S b/arch/alpha/lib/ev6-copy_page.S new file mode 100644 index 0000000000..36be5113b7 --- /dev/null +++ b/arch/alpha/lib/ev6-copy_page.S @@ -0,0 +1,205 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/alpha/lib/ev6-copy_page.S + * + * Copy an entire page. + */ + +/* The following comparison of this routine vs the normal copy_page.S + was written by an unnamed ev6 hardware designer and forwarded to me + via Steven Hobbs <hobbs@steven.zko.dec.com>. + + First Problem: STQ overflows. + ----------------------------- + + It would be nice if EV6 handled every resource overflow efficiently, + but for some it doesn't. Including store queue overflows. It causes + a trap and a restart of the pipe. + + To get around this we sometimes use (to borrow a term from a VSSAD + researcher) "aeration". The idea is to slow the rate at which the + processor receives valid instructions by inserting nops in the fetch + path. In doing so, you can prevent the overflow and actually make + the code run faster. You can, of course, take advantage of the fact + that the processor can fetch at most 4 aligned instructions per cycle. + + I inserted enough nops to force it to take 10 cycles to fetch the + loop code. In theory, EV6 should be able to execute this loop in + 9 cycles but I was not able to get it to run that fast -- the initial + conditions were such that I could not reach this optimum rate on + (chaotic) EV6. I wrote the code such that everything would issue + in order. + + Second Problem: Dcache index matches. + ------------------------------------- + + If you are going to use this routine on random aligned pages, there + is a 25% chance that the pages will be at the same dcache indices. + This results in many nasty memory traps without care. + + The solution is to schedule the prefetches to avoid the memory + conflicts. I schedule the wh64 prefetches farther ahead of the + read prefetches to avoid this problem. + + Third Problem: Needs more prefetching. + -------------------------------------- + + In order to improve the code I added deeper prefetching to take the + most advantage of EV6's bandwidth. + + I also prefetched the read stream. Note that adding the read prefetch + forced me to add another cycle to the inner-most kernel - up to 11 + from the original 8 cycles per iteration. We could improve performance + further by unrolling the loop and doing multiple prefetches per cycle. + + I think that the code below will be very robust and fast code for the + purposes of copying aligned pages. It is slower when both source and + destination pages are in the dcache, but it is my guess that this is + less important than the dcache miss case. */ + +#include <linux/export.h> + .text + .align 4 + .global copy_page + .ent copy_page +copy_page: + .prologue 0 + + /* Prefetch 5 read cachelines; write-hint 10 cache lines. */ + wh64 ($16) + ldl $31,0($17) + ldl $31,64($17) + lda $1,1*64($16) + + wh64 ($1) + ldl $31,128($17) + ldl $31,192($17) + lda $1,2*64($16) + + wh64 ($1) + ldl $31,256($17) + lda $18,118 + lda $1,3*64($16) + + wh64 ($1) + nop + lda $1,4*64($16) + lda $2,5*64($16) + + wh64 ($1) + wh64 ($2) + lda $1,6*64($16) + lda $2,7*64($16) + + wh64 ($1) + wh64 ($2) + lda $1,8*64($16) + lda $2,9*64($16) + + wh64 ($1) + wh64 ($2) + lda $19,10*64($16) + nop + + /* Main prefetching/write-hinting loop. */ +1: ldq $0,0($17) + ldq $1,8($17) + unop + unop + + unop + unop + ldq $2,16($17) + ldq $3,24($17) + + ldq $4,32($17) + ldq $5,40($17) + unop + unop + + unop + unop + ldq $6,48($17) + ldq $7,56($17) + + ldl $31,320($17) + unop + unop + unop + + /* This gives the extra cycle of aeration above the minimum. */ + unop + unop + unop + unop + + wh64 ($19) + unop + unop + unop + + stq $0,0($16) + subq $18,1,$18 + stq $1,8($16) + unop + + unop + stq $2,16($16) + addq $17,64,$17 + stq $3,24($16) + + stq $4,32($16) + stq $5,40($16) + addq $19,64,$19 + unop + + stq $6,48($16) + stq $7,56($16) + addq $16,64,$16 + bne $18, 1b + + /* Prefetch the final 5 cache lines of the read stream. */ + lda $18,10 + ldl $31,320($17) + ldl $31,384($17) + ldl $31,448($17) + + ldl $31,512($17) + ldl $31,576($17) + nop + nop + + /* Non-prefetching, non-write-hinting cleanup loop for the + final 10 cache lines. */ +2: ldq $0,0($17) + ldq $1,8($17) + ldq $2,16($17) + ldq $3,24($17) + + ldq $4,32($17) + ldq $5,40($17) + ldq $6,48($17) + ldq $7,56($17) + + stq $0,0($16) + subq $18,1,$18 + stq $1,8($16) + addq $17,64,$17 + + stq $2,16($16) + stq $3,24($16) + stq $4,32($16) + stq $5,40($16) + + stq $6,48($16) + stq $7,56($16) + addq $16,64,$16 + bne $18, 2b + + ret + nop + unop + nop + + .end copy_page + EXPORT_SYMBOL(copy_page) diff --git a/arch/alpha/lib/ev6-copy_user.S b/arch/alpha/lib/ev6-copy_user.S new file mode 100644 index 0000000000..b9b19710c3 --- /dev/null +++ b/arch/alpha/lib/ev6-copy_user.S @@ -0,0 +1,227 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/alpha/lib/ev6-copy_user.S + * + * 21264 version contributed by Rick Gorton <rick.gorton@alpha-processor.com> + * + * Copy to/from user space, handling exceptions as we go.. This + * isn't exactly pretty. + * + * This is essentially the same as "memcpy()", but with a few twists. + * Notably, we have to make sure that $0 is always up-to-date and + * contains the right "bytes left to copy" value (and that it is updated + * only _after_ a successful copy). There is also some rather minor + * exception setup stuff.. + * + * Much of the information about 21264 scheduling/coding comes from: + * Compiler Writer's Guide for the Alpha 21264 + * abbreviated as 'CWG' in other comments here + * ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html + * Scheduling notation: + * E - either cluster + * U - upper subcluster; U0 - subcluster U0; U1 - subcluster U1 + * L - lower subcluster; L0 - subcluster L0; L1 - subcluster L1 + */ + +#include <linux/export.h> +/* Allow an exception for an insn; exit if we get one. */ +#define EXI(x,y...) \ + 99: x,##y; \ + .section __ex_table,"a"; \ + .long 99b - .; \ + lda $31, $exitin-99b($31); \ + .previous + +#define EXO(x,y...) \ + 99: x,##y; \ + .section __ex_table,"a"; \ + .long 99b - .; \ + lda $31, $exitout-99b($31); \ + .previous + + .set noat + .align 4 + .globl __copy_user + .ent __copy_user + # Pipeline info: Slotting & Comments +__copy_user: + .prologue 0 + mov $18, $0 # .. .. .. E + subq $18, 32, $1 # .. .. E. .. : Is this going to be a small copy? + nop # .. E .. .. + beq $18, $zerolength # U .. .. .. : U L U L + + and $16,7,$3 # .. .. .. E : is leading dest misalignment + ble $1, $onebyteloop # .. .. U .. : 1st branch : small amount of data + beq $3, $destaligned # .. U .. .. : 2nd (one cycle fetcher stall) + subq $3, 8, $3 # E .. .. .. : L U U L : trip counter +/* + * The fetcher stall also hides the 1 cycle cross-cluster stall for $3 (L --> U) + * This loop aligns the destination a byte at a time + * We know we have at least one trip through this loop + */ +$aligndest: + EXI( ldbu $1,0($17) ) # .. .. .. L : Keep loads separate from stores + addq $16,1,$16 # .. .. E .. : Section 3.8 in the CWG + addq $3,1,$3 # .. E .. .. : + nop # E .. .. .. : U L U L + +/* + * the -1 is to compensate for the inc($16) done in a previous quadpack + * which allows us zero dependencies within either quadpack in the loop + */ + EXO( stb $1,-1($16) ) # .. .. .. L : + addq $17,1,$17 # .. .. E .. : Section 3.8 in the CWG + subq $0,1,$0 # .. E .. .. : + bne $3, $aligndest # U .. .. .. : U L U L + +/* + * If we fell through into here, we have a minimum of 33 - 7 bytes + * If we arrived via branch, we have a minimum of 32 bytes + */ +$destaligned: + and $17,7,$1 # .. .. .. E : Check _current_ source alignment + bic $0,7,$4 # .. .. E .. : number bytes as a quadword loop + EXI( ldq_u $3,0($17) ) # .. L .. .. : Forward fetch for fallthrough code + beq $1,$quadaligned # U .. .. .. : U L U L + +/* + * In the worst case, we've just executed an ldq_u here from 0($17) + * and we'll repeat it once if we take the branch + */ + +/* Misaligned quadword loop - not unrolled. Leave it that way. */ +$misquad: + EXI( ldq_u $2,8($17) ) # .. .. .. L : + subq $4,8,$4 # .. .. E .. : + extql $3,$17,$3 # .. U .. .. : + extqh $2,$17,$1 # U .. .. .. : U U L L + + bis $3,$1,$1 # .. .. .. E : + EXO( stq $1,0($16) ) # .. .. L .. : + addq $17,8,$17 # .. E .. .. : + subq $0,8,$0 # E .. .. .. : U L L U + + addq $16,8,$16 # .. .. .. E : + bis $2,$2,$3 # .. .. E .. : + nop # .. E .. .. : + bne $4,$misquad # U .. .. .. : U L U L + + nop # .. .. .. E + nop # .. .. E .. + nop # .. E .. .. + beq $0,$zerolength # U .. .. .. : U L U L + +/* We know we have at least one trip through the byte loop */ + EXI ( ldbu $2,0($17) ) # .. .. .. L : No loads in the same quad + addq $16,1,$16 # .. .. E .. : as the store (Section 3.8 in CWG) + nop # .. E .. .. : + br $31, $dirtyentry # L0 .. .. .. : L U U L +/* Do the trailing byte loop load, then hop into the store part of the loop */ + +/* + * A minimum of (33 - 7) bytes to do a quad at a time. + * Based upon the usage context, it's worth the effort to unroll this loop + * $0 - number of bytes to be moved + * $4 - number of bytes to move as quadwords + * $16 is current destination address + * $17 is current source address + */ +$quadaligned: + subq $4, 32, $2 # .. .. .. E : do not unroll for small stuff + nop # .. .. E .. + nop # .. E .. .. + blt $2, $onequad # U .. .. .. : U L U L + +/* + * There is a significant assumption here that the source and destination + * addresses differ by more than 32 bytes. In this particular case, a + * sparsity of registers further bounds this to be a minimum of 8 bytes. + * But if this isn't met, then the output result will be incorrect. + * Furthermore, due to a lack of available registers, we really can't + * unroll this to be an 8x loop (which would enable us to use the wh64 + * instruction memory hint instruction). + */ +$unroll4: + EXI( ldq $1,0($17) ) # .. .. .. L + EXI( ldq $2,8($17) ) # .. .. L .. + subq $4,32,$4 # .. E .. .. + nop # E .. .. .. : U U L L + + addq $17,16,$17 # .. .. .. E + EXO( stq $1,0($16) ) # .. .. L .. + EXO( stq $2,8($16) ) # .. L .. .. + subq $0,16,$0 # E .. .. .. : U L L U + + addq $16,16,$16 # .. .. .. E + EXI( ldq $1,0($17) ) # .. .. L .. + EXI( ldq $2,8($17) ) # .. L .. .. + subq $4, 32, $3 # E .. .. .. : U U L L : is there enough for another trip? + + EXO( stq $1,0($16) ) # .. .. .. L + EXO( stq $2,8($16) ) # .. .. L .. + subq $0,16,$0 # .. E .. .. + addq $17,16,$17 # E .. .. .. : U L L U + + nop # .. .. .. E + nop # .. .. E .. + addq $16,16,$16 # .. E .. .. + bgt $3,$unroll4 # U .. .. .. : U L U L + + nop + nop + nop + beq $4, $noquads + +$onequad: + EXI( ldq $1,0($17) ) + subq $4,8,$4 + addq $17,8,$17 + nop + + EXO( stq $1,0($16) ) + subq $0,8,$0 + addq $16,8,$16 + bne $4,$onequad + +$noquads: + nop + nop + nop + beq $0,$zerolength + +/* + * For small copies (or the tail of a larger copy), do a very simple byte loop. + * There's no point in doing a lot of complex alignment calculations to try to + * to quadword stuff for a small amount of data. + * $0 - remaining number of bytes left to copy + * $16 - current dest addr + * $17 - current source addr + */ + +$onebyteloop: + EXI ( ldbu $2,0($17) ) # .. .. .. L : No loads in the same quad + addq $16,1,$16 # .. .. E .. : as the store (Section 3.8 in CWG) + nop # .. E .. .. : + nop # E .. .. .. : U L U L + +$dirtyentry: +/* + * the -1 is to compensate for the inc($16) done in a previous quadpack + * which allows us zero dependencies within either quadpack in the loop + */ + EXO ( stb $2,-1($16) ) # .. .. .. L : + addq $17,1,$17 # .. .. E .. : quadpack as the load + subq $0,1,$0 # .. E .. .. : change count _after_ copy + bgt $0,$onebyteloop # U .. .. .. : U L U L + +$zerolength: +$exitin: +$exitout: # Destination for exception recovery(?) + nop # .. .. .. E + nop # .. .. E .. + nop # .. E .. .. + ret $31,($26),1 # L0 .. .. .. : L U L U + + .end __copy_user + EXPORT_SYMBOL(__copy_user) diff --git a/arch/alpha/lib/ev6-csum_ipv6_magic.S b/arch/alpha/lib/ev6-csum_ipv6_magic.S new file mode 100644 index 0000000000..2ee548be98 --- /dev/null +++ b/arch/alpha/lib/ev6-csum_ipv6_magic.S @@ -0,0 +1,153 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/alpha/lib/ev6-csum_ipv6_magic.S + * 21264 version contributed by Rick Gorton <rick.gorton@alpha-processor.com> + * + * unsigned short csum_ipv6_magic(struct in6_addr *saddr, + * struct in6_addr *daddr, + * __u32 len, + * unsigned short proto, + * unsigned int csum); + * + * Much of the information about 21264 scheduling/coding comes from: + * Compiler Writer's Guide for the Alpha 21264 + * abbreviated as 'CWG' in other comments here + * ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html + * Scheduling notation: + * E - either cluster + * U - upper subcluster; U0 - subcluster U0; U1 - subcluster U1 + * L - lower subcluster; L0 - subcluster L0; L1 - subcluster L1 + * Try not to change the actual algorithm if possible for consistency. + * Determining actual stalls (other than slotting) doesn't appear to be easy to do. + * + * unsigned short csum_ipv6_magic(struct in6_addr *saddr, + * struct in6_addr *daddr, + * __u32 len, + * unsigned short proto, + * unsigned int csum); + * + * Swap <proto> (takes form 0xaabb) + * Then shift it left by 48, so result is: + * 0xbbaa0000 00000000 + * Then turn it back into a sign extended 32-bit item + * 0xbbaa0000 + * + * Swap <len> (an unsigned int) using Mike Burrows' 7-instruction sequence + * (we can't hide the 3-cycle latency of the unpkbw in the 6-instruction sequence) + * Assume input takes form 0xAABBCCDD + * + * Finally, original 'folding' approach is to split the long into 4 unsigned shorts + * add 4 ushorts, resulting in ushort/carry + * add carry bits + ushort --> ushort + * add carry bits + ushort --> ushort (in case the carry results in an overflow) + * Truncate to a ushort. (took 13 instructions) + * From doing some testing, using the approach in checksum.c:from64to16() + * results in the same outcome: + * split into 2 uints, add those, generating a ulong + * add the 3 low ushorts together, generating a uint + * a final add of the 2 lower ushorts + * truncating the result. + * + * Misalignment handling added by Ivan Kokshaysky <ink@jurassic.park.msu.ru> + * The cost is 16 instructions (~8 cycles), including two extra loads which + * may cause additional delay in rare cases (load-load replay traps). + */ + +#include <linux/export.h> + .globl csum_ipv6_magic + .align 4 + .ent csum_ipv6_magic + .frame $30,0,$26,0 +csum_ipv6_magic: + .prologue 0 + + ldq_u $0,0($16) # L : Latency: 3 + inslh $18,7,$4 # U : 0000000000AABBCC + ldq_u $1,8($16) # L : Latency: 3 + sll $19,8,$7 # U : U L U L : 0x00000000 00aabb00 + + and $16,7,$6 # E : src misalignment + ldq_u $5,15($16) # L : Latency: 3 + zapnot $20,15,$20 # U : zero extend incoming csum + ldq_u $2,0($17) # L : U L U L : Latency: 3 + + extql $0,$6,$0 # U : + extqh $1,$6,$22 # U : + ldq_u $3,8($17) # L : Latency: 3 + sll $19,24,$19 # U : U U L U : 0x000000aa bb000000 + + cmoveq $6,$31,$22 # E : src aligned? + ldq_u $23,15($17) # L : Latency: 3 + inswl $18,3,$18 # U : 000000CCDD000000 + addl $19,$7,$19 # E : U L U L : <sign bits>bbaabb00 + + or $0,$22,$0 # E : 1st src word complete + extql $1,$6,$1 # U : + or $18,$4,$18 # E : 000000CCDDAABBCC + extqh $5,$6,$5 # U : L U L U + + and $17,7,$6 # E : dst misalignment + extql $2,$6,$2 # U : + or $1,$5,$1 # E : 2nd src word complete + extqh $3,$6,$22 # U : L U L U : + + cmoveq $6,$31,$22 # E : dst aligned? + extql $3,$6,$3 # U : + addq $20,$0,$20 # E : begin summing the words + extqh $23,$6,$23 # U : L U L U : + + srl $18,16,$4 # U : 0000000000CCDDAA + or $2,$22,$2 # E : 1st dst word complete + zap $19,0x3,$19 # U : <sign bits>bbaa0000 + or $3,$23,$3 # E : U L U L : 2nd dst word complete + + cmpult $20,$0,$0 # E : + addq $20,$1,$20 # E : + zapnot $18,0xa,$18 # U : 00000000DD00BB00 + zap $4,0xa,$4 # U : U U L L : 0000000000CC00AA + + or $18,$4,$18 # E : 00000000DDCCBBAA + nop # E : + cmpult $20,$1,$1 # E : + addq $20,$2,$20 # E : U L U L + + cmpult $20,$2,$2 # E : + addq $20,$3,$20 # E : + cmpult $20,$3,$3 # E : (1 cycle stall on $20) + addq $20,$18,$20 # E : U L U L (1 cycle stall on $20) + + cmpult $20,$18,$18 # E : + addq $20,$19,$20 # E : (1 cycle stall on $20) + addq $0,$1,$0 # E : merge the carries back into the csum + addq $2,$3,$2 # E : + + cmpult $20,$19,$19 # E : + addq $18,$19,$18 # E : (1 cycle stall on $19) + addq $0,$2,$0 # E : + addq $20,$18,$20 # E : U L U L : + /* (1 cycle stall on $18, 2 cycles on $20) */ + + addq $0,$20,$0 # E : + zapnot $0,15,$1 # U : Start folding output (1 cycle stall on $0) + nop # E : + srl $0,32,$0 # U : U L U L : (1 cycle stall on $0) + + addq $1,$0,$1 # E : Finished generating ulong + extwl $1,2,$2 # U : ushort[1] (1 cycle stall on $1) + zapnot $1,3,$0 # U : ushort[0] (1 cycle stall on $1) + extwl $1,4,$1 # U : ushort[2] (1 cycle stall on $1) + + addq $0,$2,$0 # E + addq $0,$1,$3 # E : Finished generating uint + /* (1 cycle stall on $0) */ + extwl $3,2,$1 # U : ushort[1] (1 cycle stall on $3) + nop # E : L U L U + + addq $1,$3,$0 # E : Final carry + not $0,$4 # E : complement (1 cycle stall on $0) + zapnot $4,3,$0 # U : clear upper garbage bits + /* (1 cycle stall on $4) */ + ret # L0 : L U L U + + .end csum_ipv6_magic + EXPORT_SYMBOL(csum_ipv6_magic) diff --git a/arch/alpha/lib/ev6-divide.S b/arch/alpha/lib/ev6-divide.S new file mode 100644 index 0000000000..b73a6d2636 --- /dev/null +++ b/arch/alpha/lib/ev6-divide.S @@ -0,0 +1,263 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/alpha/lib/ev6-divide.S + * + * 21264 version contributed by Rick Gorton <rick.gorton@alpha-processor.com> + * + * Alpha division.. + */ + +/* + * The alpha chip doesn't provide hardware division, so we have to do it + * by hand. The compiler expects the functions + * + * __divqu: 64-bit unsigned long divide + * __remqu: 64-bit unsigned long remainder + * __divqs/__remqs: signed 64-bit + * __divlu/__remlu: unsigned 32-bit + * __divls/__remls: signed 32-bit + * + * These are not normal C functions: instead of the normal + * calling sequence, these expect their arguments in registers + * $24 and $25, and return the result in $27. Register $28 may + * be clobbered (assembly temporary), anything else must be saved. + * + * In short: painful. + * + * This is a rather simple bit-at-a-time algorithm: it's very good + * at dividing random 64-bit numbers, but the more usual case where + * the divisor is small is handled better by the DEC algorithm + * using lookup tables. This uses much less memory, though, and is + * nicer on the cache.. Besides, I don't know the copyright status + * of the DEC code. + */ + +/* + * My temporaries: + * $0 - current bit + * $1 - shifted divisor + * $2 - modulus/quotient + * + * $23 - return address + * $24 - dividend + * $25 - divisor + * + * $27 - quotient/modulus + * $28 - compare status + * + * Much of the information about 21264 scheduling/coding comes from: + * Compiler Writer's Guide for the Alpha 21264 + * abbreviated as 'CWG' in other comments here + * ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html + * Scheduling notation: + * E - either cluster + * U - upper subcluster; U0 - subcluster U0; U1 - subcluster U1 + * L - lower subcluster; L0 - subcluster L0; L1 - subcluster L1 + * Try not to change the actual algorithm if possible for consistency. + */ + +#include <linux/export.h> +#define halt .long 0 + +/* + * Select function type and registers + */ +#define mask $0 +#define divisor $1 +#define compare $28 +#define tmp1 $3 +#define tmp2 $4 + +#ifdef DIV +#define DIV_ONLY(x,y...) x,##y +#define MOD_ONLY(x,y...) +#define func(x) __div##x +#define modulus $2 +#define quotient $27 +#define GETSIGN(x) xor $24,$25,x +#define STACK 48 +#else +#define DIV_ONLY(x,y...) +#define MOD_ONLY(x,y...) x,##y +#define func(x) __rem##x +#define modulus $27 +#define quotient $2 +#define GETSIGN(x) bis $24,$24,x +#define STACK 32 +#endif + +/* + * For 32-bit operations, we need to extend to 64-bit + */ +#ifdef INTSIZE +#define ufunction func(lu) +#define sfunction func(l) +#define LONGIFY(x) zapnot x,15,x +#define SLONGIFY(x) addl x,0,x +#else +#define ufunction func(qu) +#define sfunction func(q) +#define LONGIFY(x) +#define SLONGIFY(x) +#endif + +.set noat +.align 4 +.globl ufunction +.ent ufunction +ufunction: + subq $30,STACK,$30 # E : + .frame $30,STACK,$23 + .prologue 0 + +7: stq $1, 0($30) # L : + bis $25,$25,divisor # E : + stq $2, 8($30) # L : L U L U + + bis $24,$24,modulus # E : + stq $0,16($30) # L : + bis $31,$31,quotient # E : + LONGIFY(divisor) # E : U L L U + + stq tmp1,24($30) # L : + LONGIFY(modulus) # E : + bis $31,1,mask # E : + DIV_ONLY(stq tmp2,32($30)) # L : L U U L + + beq divisor, 9f /* div by zero */ + /* + * In spite of the DIV_ONLY being either a non-instruction + * or an actual stq, the addition of the .align directive + * below ensures that label 1 is going to be nicely aligned + */ + + .align 4 +#ifdef INTSIZE + /* + * shift divisor left, using 3-bit shifts for + * 32-bit divides as we can't overflow. Three-bit + * shifts will result in looping three times less + * here, but can result in two loops more later. + * Thus using a large shift isn't worth it (and + * s8add pairs better than a sll..) + */ +1: cmpult divisor,modulus,compare # E : + s8addq divisor,$31,divisor # E : + s8addq mask,$31,mask # E : + bne compare,1b # U : U L U L +#else +1: cmpult divisor,modulus,compare # E : + nop # E : + nop # E : + blt divisor, 2f # U : U L U L + + addq divisor,divisor,divisor # E : + addq mask,mask,mask # E : + unop # E : + bne compare,1b # U : U L U L +#endif + + /* ok, start to go right again.. */ +2: + /* + * Keep things nicely bundled... use a nop instead of not + * having an instruction for DIV_ONLY + */ +#ifdef DIV + DIV_ONLY(addq quotient,mask,tmp2) # E : +#else + nop # E : +#endif + srl mask,1,mask # U : + cmpule divisor,modulus,compare # E : + subq modulus,divisor,tmp1 # E : + +#ifdef DIV + DIV_ONLY(cmovne compare,tmp2,quotient) # E : Latency 2, extra map slot + nop # E : as part of the cmovne + srl divisor,1,divisor # U : + nop # E : L U L U + + nop # E : + cmovne compare,tmp1,modulus # E : Latency 2, extra map slot + nop # E : as part of the cmovne + bne mask,2b # U : U L U L +#else + srl divisor,1,divisor # U : + cmovne compare,tmp1,modulus # E : Latency 2, extra map slot + nop # E : as part of the cmovne + bne mask,2b # U : U L L U +#endif + +9: ldq $1, 0($30) # L : + ldq $2, 8($30) # L : + nop # E : + nop # E : U U L L + + ldq $0,16($30) # L : + ldq tmp1,24($30) # L : + nop # E : + nop # E : + +#ifdef DIV + DIV_ONLY(ldq tmp2,32($30)) # L : +#else + nop # E : +#endif + addq $30,STACK,$30 # E : + ret $31,($23),1 # L0 : L U U L + .end ufunction +EXPORT_SYMBOL(ufunction) + +/* + * Uhh.. Ugly signed division. I'd rather not have it at all, but + * it's needed in some circumstances. There are different ways to + * handle this, really. This does: + * -a / b = a / -b = -(a / b) + * -a % b = -(a % b) + * a % -b = a % b + * which is probably not the best solution, but at least should + * have the property that (x/y)*y + (x%y) = x. + */ +.align 4 +.globl sfunction +.ent sfunction +sfunction: + subq $30,STACK,$30 # E : + .frame $30,STACK,$23 + .prologue 0 + bis $24,$25,$28 # E : + SLONGIFY($28) # E : + bge $28,7b # U : + + stq $24,0($30) # L : + subq $31,$24,$28 # E : + stq $25,8($30) # L : + nop # E : U L U L + + cmovlt $24,$28,$24 /* abs($24) */ # E : Latency 2, extra map slot + nop # E : as part of the cmov + stq $23,16($30) # L : + subq $31,$25,$28 # E : U L U L + + stq tmp1,24($30) # L : + cmovlt $25,$28,$25 /* abs($25) */ # E : Latency 2, extra map slot + nop # E : + bsr $23,ufunction # L0: L U L U + + ldq $24,0($30) # L : + ldq $25,8($30) # L : + GETSIGN($28) # E : + subq $31,$27,tmp1 # E : U U L L + + SLONGIFY($28) # E : + ldq $23,16($30) # L : + cmovlt $28,tmp1,$27 # E : Latency 2, extra map slot + nop # E : U L L U : as part of the cmov + + ldq tmp1,24($30) # L : + nop # E : as part of the cmov + addq $30,STACK,$30 # E : + ret $31,($23),1 # L0 : L U U L + .end sfunction +EXPORT_SYMBOL(sfunction) diff --git a/arch/alpha/lib/ev6-memchr.S b/arch/alpha/lib/ev6-memchr.S new file mode 100644 index 0000000000..f75ba43e61 --- /dev/null +++ b/arch/alpha/lib/ev6-memchr.S @@ -0,0 +1,193 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/alpha/lib/ev6-memchr.S + * + * 21264 version contributed by Rick Gorton <rick.gorton@alpha-processor.com> + * + * Finds characters in a memory area. Optimized for the Alpha: + * + * - memory accessed as aligned quadwords only + * - uses cmpbge to compare 8 bytes in parallel + * - does binary search to find 0 byte in last + * quadword (HAKMEM needed 12 instructions to + * do this instead of the 9 instructions that + * binary search needs). + * + * For correctness consider that: + * + * - only minimum number of quadwords may be accessed + * - the third argument is an unsigned long + * + * Much of the information about 21264 scheduling/coding comes from: + * Compiler Writer's Guide for the Alpha 21264 + * abbreviated as 'CWG' in other comments here + * ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html + * Scheduling notation: + * E - either cluster + * U - upper subcluster; U0 - subcluster U0; U1 - subcluster U1 + * L - lower subcluster; L0 - subcluster L0; L1 - subcluster L1 + * Try not to change the actual algorithm if possible for consistency. + */ +#include <linux/export.h> + .set noreorder + .set noat + + .align 4 + .globl memchr + .ent memchr +memchr: + .frame $30,0,$26,0 + .prologue 0 + + # Hack -- if someone passes in (size_t)-1, hoping to just + # search til the end of the address space, we will overflow + # below when we find the address of the last byte. Given + # that we will never have a 56-bit address space, cropping + # the length is the easiest way to avoid trouble. + zap $18, 0x80, $5 # U : Bound length + beq $18, $not_found # U : + ldq_u $1, 0($16) # L : load first quadword Latency=3 + and $17, 0xff, $17 # E : L L U U : 00000000000000ch + + insbl $17, 1, $2 # U : 000000000000ch00 + cmpult $18, 9, $4 # E : small (< 1 quad) string? + or $2, $17, $17 # E : 000000000000chch + lda $3, -1($31) # E : U L L U + + sll $17, 16, $2 # U : 00000000chch0000 + addq $16, $5, $5 # E : Max search address + or $2, $17, $17 # E : 00000000chchchch + sll $17, 32, $2 # U : U L L U : chchchch00000000 + + or $2, $17, $17 # E : chchchchchchchch + extql $1, $16, $7 # U : $7 is upper bits + beq $4, $first_quad # U : + ldq_u $6, -1($5) # L : L U U L : eight or less bytes to search Latency=3 + + extqh $6, $16, $6 # U : 2 cycle stall for $6 + mov $16, $0 # E : + nop # E : + or $7, $6, $1 # E : L U L U $1 = quadword starting at $16 + + # Deal with the case where at most 8 bytes remain to be searched + # in $1. E.g.: + # $18 = 6 + # $1 = ????c6c5c4c3c2c1 +$last_quad: + negq $18, $6 # E : + xor $17, $1, $1 # E : + srl $3, $6, $6 # U : $6 = mask of $18 bits set + cmpbge $31, $1, $2 # E : L U L U + + nop + nop + and $2, $6, $2 # E : + beq $2, $not_found # U : U L U L + +$found_it: +#ifdef CONFIG_ALPHA_EV67 + /* + * Since we are guaranteed to have set one of the bits, we don't + * have to worry about coming back with a 0x40 out of cttz... + */ + cttz $2, $3 # U0 : + addq $0, $3, $0 # E : All done + nop # E : + ret # L0 : L U L U +#else + /* + * Slow and clunky. It can probably be improved. + * An exercise left for others. + */ + negq $2, $3 # E : + and $2, $3, $2 # E : + and $2, 0x0f, $1 # E : + addq $0, 4, $3 # E : + + cmoveq $1, $3, $0 # E : Latency 2, extra map cycle + nop # E : keep with cmov + and $2, 0x33, $1 # E : + addq $0, 2, $3 # E : U L U L : 2 cycle stall on $0 + + cmoveq $1, $3, $0 # E : Latency 2, extra map cycle + nop # E : keep with cmov + and $2, 0x55, $1 # E : + addq $0, 1, $3 # E : U L U L : 2 cycle stall on $0 + + cmoveq $1, $3, $0 # E : Latency 2, extra map cycle + nop + nop + ret # L0 : L U L U +#endif + + # Deal with the case where $18 > 8 bytes remain to be + # searched. $16 may not be aligned. + .align 4 +$first_quad: + andnot $16, 0x7, $0 # E : + insqh $3, $16, $2 # U : $2 = 0000ffffffffffff ($16<0:2> ff) + xor $1, $17, $1 # E : + or $1, $2, $1 # E : U L U L $1 = ====ffffffffffff + + cmpbge $31, $1, $2 # E : + bne $2, $found_it # U : + # At least one byte left to process. + ldq $1, 8($0) # L : + subq $5, 1, $18 # E : U L U L + + addq $0, 8, $0 # E : + # Make $18 point to last quad to be accessed (the + # last quad may or may not be partial). + andnot $18, 0x7, $18 # E : + cmpult $0, $18, $2 # E : + beq $2, $final # U : U L U L + + # At least two quads remain to be accessed. + + subq $18, $0, $4 # E : $4 <- nr quads to be processed + and $4, 8, $4 # E : odd number of quads? + bne $4, $odd_quad_count # U : + # At least three quads remain to be accessed + mov $1, $4 # E : L U L U : move prefetched value to correct reg + + .align 4 +$unrolled_loop: + ldq $1, 8($0) # L : prefetch $1 + xor $17, $4, $2 # E : + cmpbge $31, $2, $2 # E : + bne $2, $found_it # U : U L U L + + addq $0, 8, $0 # E : + nop # E : + nop # E : + nop # E : + +$odd_quad_count: + xor $17, $1, $2 # E : + ldq $4, 8($0) # L : prefetch $4 + cmpbge $31, $2, $2 # E : + addq $0, 8, $6 # E : + + bne $2, $found_it # U : + cmpult $6, $18, $6 # E : + addq $0, 8, $0 # E : + nop # E : + + bne $6, $unrolled_loop # U : + mov $4, $1 # E : move prefetched value into $1 + nop # E : + nop # E : + +$final: subq $5, $0, $18 # E : $18 <- number of bytes left to do + nop # E : + nop # E : + bne $18, $last_quad # U : + +$not_found: + mov $31, $0 # E : + nop # E : + nop # E : + ret # L0 : + + .end memchr + EXPORT_SYMBOL(memchr) diff --git a/arch/alpha/lib/ev6-memcpy.S b/arch/alpha/lib/ev6-memcpy.S new file mode 100644 index 0000000000..3ef43c26c8 --- /dev/null +++ b/arch/alpha/lib/ev6-memcpy.S @@ -0,0 +1,250 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/alpha/lib/ev6-memcpy.S + * 21264 version by Rick Gorton <rick.gorton@alpha-processor.com> + * + * Reasonably optimized memcpy() routine for the Alpha 21264 + * + * - memory accessed as aligned quadwords only + * - uses bcmpge to compare 8 bytes in parallel + * + * Much of the information about 21264 scheduling/coding comes from: + * Compiler Writer's Guide for the Alpha 21264 + * abbreviated as 'CWG' in other comments here + * ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html + * Scheduling notation: + * E - either cluster + * U - upper subcluster; U0 - subcluster U0; U1 - subcluster U1 + * L - lower subcluster; L0 - subcluster L0; L1 - subcluster L1 + * + * Temp usage notes: + * $1,$2, - scratch + */ +#include <linux/export.h> + .set noreorder + .set noat + + .align 4 + .globl memcpy + .ent memcpy +memcpy: + .frame $30,0,$26,0 + .prologue 0 + + mov $16, $0 # E : copy dest to return + ble $18, $nomoredata # U : done with the copy? + xor $16, $17, $1 # E : are source and dest alignments the same? + and $1, 7, $1 # E : are they the same mod 8? + + bne $1, $misaligned # U : Nope - gotta do this the slow way + /* source and dest are same mod 8 address */ + and $16, 7, $1 # E : Are both 0mod8? + beq $1, $both_0mod8 # U : Yes + nop # E : + + /* + * source and dest are same misalignment. move a byte at a time + * until a 0mod8 alignment for both is reached. + * At least one byte more to move + */ + +$head_align: + ldbu $1, 0($17) # L : grab a byte + subq $18, 1, $18 # E : count-- + addq $17, 1, $17 # E : src++ + stb $1, 0($16) # L : + addq $16, 1, $16 # E : dest++ + and $16, 7, $1 # E : Are we at 0mod8 yet? + ble $18, $nomoredata # U : done with the copy? + bne $1, $head_align # U : + +$both_0mod8: + cmple $18, 127, $1 # E : Can we unroll the loop? + bne $1, $no_unroll # U : + and $16, 63, $1 # E : get mod64 alignment + beq $1, $do_unroll # U : no single quads to fiddle + +$single_head_quad: + ldq $1, 0($17) # L : get 8 bytes + subq $18, 8, $18 # E : count -= 8 + addq $17, 8, $17 # E : src += 8 + nop # E : + + stq $1, 0($16) # L : store + addq $16, 8, $16 # E : dest += 8 + and $16, 63, $1 # E : get mod64 alignment + bne $1, $single_head_quad # U : still not fully aligned + +$do_unroll: + addq $16, 64, $7 # E : Initial (+1 trip) wh64 address + cmple $18, 127, $1 # E : Can we go through the unrolled loop? + bne $1, $tail_quads # U : Nope + nop # E : + +$unroll_body: + wh64 ($7) # L1 : memory subsystem hint: 64 bytes at + # ($7) are about to be over-written + ldq $6, 0($17) # L0 : bytes 0..7 + nop # E : + nop # E : + + ldq $4, 8($17) # L : bytes 8..15 + ldq $5, 16($17) # L : bytes 16..23 + addq $7, 64, $7 # E : Update next wh64 address + nop # E : + + ldq $3, 24($17) # L : bytes 24..31 + addq $16, 64, $1 # E : fallback value for wh64 + nop # E : + nop # E : + + addq $17, 32, $17 # E : src += 32 bytes + stq $6, 0($16) # L : bytes 0..7 + nop # E : + nop # E : + + stq $4, 8($16) # L : bytes 8..15 + stq $5, 16($16) # L : bytes 16..23 + subq $18, 192, $2 # E : At least two more trips to go? + nop # E : + + stq $3, 24($16) # L : bytes 24..31 + addq $16, 32, $16 # E : dest += 32 bytes + nop # E : + nop # E : + + ldq $6, 0($17) # L : bytes 0..7 + ldq $4, 8($17) # L : bytes 8..15 + cmovlt $2, $1, $7 # E : Latency 2, extra map slot - Use + # fallback wh64 address if < 2 more trips + nop # E : + + ldq $5, 16($17) # L : bytes 16..23 + ldq $3, 24($17) # L : bytes 24..31 + addq $16, 32, $16 # E : dest += 32 + subq $18, 64, $18 # E : count -= 64 + + addq $17, 32, $17 # E : src += 32 + stq $6, -32($16) # L : bytes 0..7 + stq $4, -24($16) # L : bytes 8..15 + cmple $18, 63, $1 # E : At least one more trip? + + stq $5, -16($16) # L : bytes 16..23 + stq $3, -8($16) # L : bytes 24..31 + nop # E : + beq $1, $unroll_body + +$tail_quads: +$no_unroll: + .align 4 + subq $18, 8, $18 # E : At least a quad left? + blt $18, $less_than_8 # U : Nope + nop # E : + nop # E : + +$move_a_quad: + ldq $1, 0($17) # L : fetch 8 + subq $18, 8, $18 # E : count -= 8 + addq $17, 8, $17 # E : src += 8 + nop # E : + + stq $1, 0($16) # L : store 8 + addq $16, 8, $16 # E : dest += 8 + bge $18, $move_a_quad # U : + nop # E : + +$less_than_8: + .align 4 + addq $18, 8, $18 # E : add back for trailing bytes + ble $18, $nomoredata # U : All-done + nop # E : + nop # E : + + /* Trailing bytes */ +$tail_bytes: + subq $18, 1, $18 # E : count-- + ldbu $1, 0($17) # L : fetch a byte + addq $17, 1, $17 # E : src++ + nop # E : + + stb $1, 0($16) # L : store a byte + addq $16, 1, $16 # E : dest++ + bgt $18, $tail_bytes # U : more to be done? + nop # E : + + /* branching to exit takes 3 extra cycles, so replicate exit here */ + ret $31, ($26), 1 # L0 : + nop # E : + nop # E : + nop # E : + +$misaligned: + mov $0, $4 # E : dest temp + and $0, 7, $1 # E : dest alignment mod8 + beq $1, $dest_0mod8 # U : life doesnt totally suck + nop + +$aligndest: + ble $18, $nomoredata # U : + ldbu $1, 0($17) # L : fetch a byte + subq $18, 1, $18 # E : count-- + addq $17, 1, $17 # E : src++ + + stb $1, 0($4) # L : store it + addq $4, 1, $4 # E : dest++ + and $4, 7, $1 # E : dest 0mod8 yet? + bne $1, $aligndest # U : go until we are aligned. + + /* Source has unknown alignment, but dest is known to be 0mod8 */ +$dest_0mod8: + subq $18, 8, $18 # E : At least a quad left? + blt $18, $misalign_tail # U : Nope + ldq_u $3, 0($17) # L : seed (rotating load) of 8 bytes + nop # E : + +$mis_quad: + ldq_u $16, 8($17) # L : Fetch next 8 + extql $3, $17, $3 # U : masking + extqh $16, $17, $1 # U : masking + bis $3, $1, $1 # E : merged bytes to store + + subq $18, 8, $18 # E : count -= 8 + addq $17, 8, $17 # E : src += 8 + stq $1, 0($4) # L : store 8 (aligned) + mov $16, $3 # E : "rotate" source data + + addq $4, 8, $4 # E : dest += 8 + bge $18, $mis_quad # U : More quads to move + nop + nop + +$misalign_tail: + addq $18, 8, $18 # E : account for tail stuff + ble $18, $nomoredata # U : + nop + nop + +$misalign_byte: + ldbu $1, 0($17) # L : fetch 1 + subq $18, 1, $18 # E : count-- + addq $17, 1, $17 # E : src++ + nop # E : + + stb $1, 0($4) # L : store + addq $4, 1, $4 # E : dest++ + bgt $18, $misalign_byte # U : more to go? + nop + + +$nomoredata: + ret $31, ($26), 1 # L0 : + nop # E : + nop # E : + nop # E : + + .end memcpy + EXPORT_SYMBOL(memcpy) + +/* For backwards module compatibility. */ +__memcpy = memcpy +.globl __memcpy diff --git a/arch/alpha/lib/ev6-memset.S b/arch/alpha/lib/ev6-memset.S new file mode 100644 index 0000000000..89d7809da4 --- /dev/null +++ b/arch/alpha/lib/ev6-memset.S @@ -0,0 +1,605 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/alpha/lib/ev6-memset.S + * + * This is an efficient (and relatively small) implementation of the C library + * "memset()" function for the 21264 implementation of Alpha. + * + * 21264 version contributed by Rick Gorton <rick.gorton@alpha-processor.com> + * + * Much of the information about 21264 scheduling/coding comes from: + * Compiler Writer's Guide for the Alpha 21264 + * abbreviated as 'CWG' in other comments here + * ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html + * Scheduling notation: + * E - either cluster + * U - upper subcluster; U0 - subcluster U0; U1 - subcluster U1 + * L - lower subcluster; L0 - subcluster L0; L1 - subcluster L1 + * The algorithm for the leading and trailing quadwords remains the same, + * however the loop has been unrolled to enable better memory throughput, + * and the code has been replicated for each of the entry points: __memset + * and __memset16 to permit better scheduling to eliminate the stalling + * encountered during the mask replication. + * A future enhancement might be to put in a byte store loop for really + * small (say < 32 bytes) memset()s. Whether or not that change would be + * a win in the kernel would depend upon the contextual usage. + * WARNING: Maintaining this is going to be more work than the above version, + * as fixes will need to be made in multiple places. The performance gain + * is worth it. + */ +#include <linux/export.h> + .set noat + .set noreorder +.text + .globl memset + .globl __memset + .globl ___memset + .globl __memset16 + .globl __constant_c_memset + + .ent ___memset +.align 5 +___memset: + .frame $30,0,$26,0 + .prologue 0 + + /* + * Serious stalling happens. The only way to mitigate this is to + * undertake a major re-write to interleave the constant materialization + * with other parts of the fall-through code. This is important, even + * though it makes maintenance tougher. + * Do this later. + */ + and $17,255,$1 # E : 00000000000000ch + insbl $17,1,$2 # U : 000000000000ch00 + bis $16,$16,$0 # E : return value + ble $18,end_b # U : zero length requested? + + addq $18,$16,$6 # E : max address to write to + bis $1,$2,$17 # E : 000000000000chch + insbl $1,2,$3 # U : 0000000000ch0000 + insbl $1,3,$4 # U : 00000000ch000000 + + or $3,$4,$3 # E : 00000000chch0000 + inswl $17,4,$5 # U : 0000chch00000000 + xor $16,$6,$1 # E : will complete write be within one quadword? + inswl $17,6,$2 # U : chch000000000000 + + or $17,$3,$17 # E : 00000000chchchch + or $2,$5,$2 # E : chchchch00000000 + bic $1,7,$1 # E : fit within a single quadword? + and $16,7,$3 # E : Target addr misalignment + + or $17,$2,$17 # E : chchchchchchchch + beq $1,within_quad_b # U : + nop # E : + beq $3,aligned_b # U : target is 0mod8 + + /* + * Target address is misaligned, and won't fit within a quadword + */ + ldq_u $4,0($16) # L : Fetch first partial + bis $16,$16,$5 # E : Save the address + insql $17,$16,$2 # U : Insert new bytes + subq $3,8,$3 # E : Invert (for addressing uses) + + addq $18,$3,$18 # E : $18 is new count ($3 is negative) + mskql $4,$16,$4 # U : clear relevant parts of the quad + subq $16,$3,$16 # E : $16 is new aligned destination + bis $2,$4,$1 # E : Final bytes + + nop + stq_u $1,0($5) # L : Store result + nop + nop + +.align 4 +aligned_b: + /* + * We are now guaranteed to be quad aligned, with at least + * one partial quad to write. + */ + + sra $18,3,$3 # U : Number of remaining quads to write + and $18,7,$18 # E : Number of trailing bytes to write + bis $16,$16,$5 # E : Save dest address + beq $3,no_quad_b # U : tail stuff only + + /* + * it's worth the effort to unroll this and use wh64 if possible + * Lifted a bunch of code from clear_user.S + * At this point, entry values are: + * $16 Current destination address + * $5 A copy of $16 + * $6 The max quadword address to write to + * $18 Number trailer bytes + * $3 Number quads to write + */ + + and $16, 0x3f, $2 # E : Forward work (only useful for unrolled loop) + subq $3, 16, $4 # E : Only try to unroll if > 128 bytes + subq $2, 0x40, $1 # E : bias counter (aligning stuff 0mod64) + blt $4, loop_b # U : + + /* + * We know we've got at least 16 quads, minimum of one trip + * through unrolled loop. Do a quad at a time to get us 0mod64 + * aligned. + */ + + nop # E : + nop # E : + nop # E : + beq $1, $bigalign_b # U : + +$alignmod64_b: + stq $17, 0($5) # L : + subq $3, 1, $3 # E : For consistency later + addq $1, 8, $1 # E : Increment towards zero for alignment + addq $5, 8, $4 # E : Initial wh64 address (filler instruction) + + nop + nop + addq $5, 8, $5 # E : Inc address + blt $1, $alignmod64_b # U : + +$bigalign_b: + /* + * $3 - number quads left to go + * $5 - target address (aligned 0mod64) + * $17 - mask of stuff to store + * Scratch registers available: $7, $2, $4, $1 + * we know that we'll be taking a minimum of one trip through + * CWG Section 3.7.6: do not expect a sustained store rate of > 1/cycle + * Assumes the wh64 needs to be for 2 trips through the loop in the future + * The wh64 is issued on for the starting destination address for trip +2 + * through the loop, and if there are less than two trips left, the target + * address will be for the current trip. + */ + +$do_wh64_b: + wh64 ($4) # L1 : memory subsystem write hint + subq $3, 24, $2 # E : For determining future wh64 addresses + stq $17, 0($5) # L : + nop # E : + + addq $5, 128, $4 # E : speculative target of next wh64 + stq $17, 8($5) # L : + stq $17, 16($5) # L : + addq $5, 64, $7 # E : Fallback address for wh64 (== next trip addr) + + stq $17, 24($5) # L : + stq $17, 32($5) # L : + cmovlt $2, $7, $4 # E : Latency 2, extra mapping cycle + nop + + stq $17, 40($5) # L : + stq $17, 48($5) # L : + subq $3, 16, $2 # E : Repeat the loop at least once more? + nop + + stq $17, 56($5) # L : + addq $5, 64, $5 # E : + subq $3, 8, $3 # E : + bge $2, $do_wh64_b # U : + + nop + nop + nop + beq $3, no_quad_b # U : Might have finished already + +.align 4 + /* + * Simple loop for trailing quadwords, or for small amounts + * of data (where we can't use an unrolled loop and wh64) + */ +loop_b: + stq $17,0($5) # L : + subq $3,1,$3 # E : Decrement number quads left + addq $5,8,$5 # E : Inc address + bne $3,loop_b # U : more? + +no_quad_b: + /* + * Write 0..7 trailing bytes. + */ + nop # E : + beq $18,end_b # U : All done? + ldq $7,0($5) # L : + mskqh $7,$6,$2 # U : Mask final quad + + insqh $17,$6,$4 # U : New bits + bis $2,$4,$1 # E : Put it all together + stq $1,0($5) # L : And back to memory + ret $31,($26),1 # L0 : + +within_quad_b: + ldq_u $1,0($16) # L : + insql $17,$16,$2 # U : New bits + mskql $1,$16,$4 # U : Clear old + bis $2,$4,$2 # E : New result + + mskql $2,$6,$4 # U : + mskqh $1,$6,$2 # U : + bis $2,$4,$1 # E : + stq_u $1,0($16) # L : + +end_b: + nop + nop + nop + ret $31,($26),1 # L0 : + .end ___memset + EXPORT_SYMBOL(___memset) + + /* + * This is the original body of code, prior to replication and + * rescheduling. Leave it here, as there may be calls to this + * entry point. + */ +.align 4 + .ent __constant_c_memset +__constant_c_memset: + .frame $30,0,$26,0 + .prologue 0 + + addq $18,$16,$6 # E : max address to write to + bis $16,$16,$0 # E : return value + xor $16,$6,$1 # E : will complete write be within one quadword? + ble $18,end # U : zero length requested? + + bic $1,7,$1 # E : fit within a single quadword + beq $1,within_one_quad # U : + and $16,7,$3 # E : Target addr misalignment + beq $3,aligned # U : target is 0mod8 + + /* + * Target address is misaligned, and won't fit within a quadword + */ + ldq_u $4,0($16) # L : Fetch first partial + bis $16,$16,$5 # E : Save the address + insql $17,$16,$2 # U : Insert new bytes + subq $3,8,$3 # E : Invert (for addressing uses) + + addq $18,$3,$18 # E : $18 is new count ($3 is negative) + mskql $4,$16,$4 # U : clear relevant parts of the quad + subq $16,$3,$16 # E : $16 is new aligned destination + bis $2,$4,$1 # E : Final bytes + + nop + stq_u $1,0($5) # L : Store result + nop + nop + +.align 4 +aligned: + /* + * We are now guaranteed to be quad aligned, with at least + * one partial quad to write. + */ + + sra $18,3,$3 # U : Number of remaining quads to write + and $18,7,$18 # E : Number of trailing bytes to write + bis $16,$16,$5 # E : Save dest address + beq $3,no_quad # U : tail stuff only + + /* + * it's worth the effort to unroll this and use wh64 if possible + * Lifted a bunch of code from clear_user.S + * At this point, entry values are: + * $16 Current destination address + * $5 A copy of $16 + * $6 The max quadword address to write to + * $18 Number trailer bytes + * $3 Number quads to write + */ + + and $16, 0x3f, $2 # E : Forward work (only useful for unrolled loop) + subq $3, 16, $4 # E : Only try to unroll if > 128 bytes + subq $2, 0x40, $1 # E : bias counter (aligning stuff 0mod64) + blt $4, loop # U : + + /* + * We know we've got at least 16 quads, minimum of one trip + * through unrolled loop. Do a quad at a time to get us 0mod64 + * aligned. + */ + + nop # E : + nop # E : + nop # E : + beq $1, $bigalign # U : + +$alignmod64: + stq $17, 0($5) # L : + subq $3, 1, $3 # E : For consistency later + addq $1, 8, $1 # E : Increment towards zero for alignment + addq $5, 8, $4 # E : Initial wh64 address (filler instruction) + + nop + nop + addq $5, 8, $5 # E : Inc address + blt $1, $alignmod64 # U : + +$bigalign: + /* + * $3 - number quads left to go + * $5 - target address (aligned 0mod64) + * $17 - mask of stuff to store + * Scratch registers available: $7, $2, $4, $1 + * we know that we'll be taking a minimum of one trip through + * CWG Section 3.7.6: do not expect a sustained store rate of > 1/cycle + * Assumes the wh64 needs to be for 2 trips through the loop in the future + * The wh64 is issued on for the starting destination address for trip +2 + * through the loop, and if there are less than two trips left, the target + * address will be for the current trip. + */ + +$do_wh64: + wh64 ($4) # L1 : memory subsystem write hint + subq $3, 24, $2 # E : For determining future wh64 addresses + stq $17, 0($5) # L : + nop # E : + + addq $5, 128, $4 # E : speculative target of next wh64 + stq $17, 8($5) # L : + stq $17, 16($5) # L : + addq $5, 64, $7 # E : Fallback address for wh64 (== next trip addr) + + stq $17, 24($5) # L : + stq $17, 32($5) # L : + cmovlt $2, $7, $4 # E : Latency 2, extra mapping cycle + nop + + stq $17, 40($5) # L : + stq $17, 48($5) # L : + subq $3, 16, $2 # E : Repeat the loop at least once more? + nop + + stq $17, 56($5) # L : + addq $5, 64, $5 # E : + subq $3, 8, $3 # E : + bge $2, $do_wh64 # U : + + nop + nop + nop + beq $3, no_quad # U : Might have finished already + +.align 4 + /* + * Simple loop for trailing quadwords, or for small amounts + * of data (where we can't use an unrolled loop and wh64) + */ +loop: + stq $17,0($5) # L : + subq $3,1,$3 # E : Decrement number quads left + addq $5,8,$5 # E : Inc address + bne $3,loop # U : more? + +no_quad: + /* + * Write 0..7 trailing bytes. + */ + nop # E : + beq $18,end # U : All done? + ldq $7,0($5) # L : + mskqh $7,$6,$2 # U : Mask final quad + + insqh $17,$6,$4 # U : New bits + bis $2,$4,$1 # E : Put it all together + stq $1,0($5) # L : And back to memory + ret $31,($26),1 # L0 : + +within_one_quad: + ldq_u $1,0($16) # L : + insql $17,$16,$2 # U : New bits + mskql $1,$16,$4 # U : Clear old + bis $2,$4,$2 # E : New result + + mskql $2,$6,$4 # U : + mskqh $1,$6,$2 # U : + bis $2,$4,$1 # E : + stq_u $1,0($16) # L : + +end: + nop + nop + nop + ret $31,($26),1 # L0 : + .end __constant_c_memset + EXPORT_SYMBOL(__constant_c_memset) + + /* + * This is a replicant of the __constant_c_memset code, rescheduled + * to mask stalls. Note that entry point names also had to change + */ + .align 5 + .ent __memset16 + +__memset16: + .frame $30,0,$26,0 + .prologue 0 + + inswl $17,0,$5 # U : 000000000000c1c2 + inswl $17,2,$2 # U : 00000000c1c20000 + bis $16,$16,$0 # E : return value + addq $18,$16,$6 # E : max address to write to + + ble $18, end_w # U : zero length requested? + inswl $17,4,$3 # U : 0000c1c200000000 + inswl $17,6,$4 # U : c1c2000000000000 + xor $16,$6,$1 # E : will complete write be within one quadword? + + or $2,$5,$2 # E : 00000000c1c2c1c2 + or $3,$4,$17 # E : c1c2c1c200000000 + bic $1,7,$1 # E : fit within a single quadword + and $16,7,$3 # E : Target addr misalignment + + or $17,$2,$17 # E : c1c2c1c2c1c2c1c2 + beq $1,within_quad_w # U : + nop + beq $3,aligned_w # U : target is 0mod8 + + /* + * Target address is misaligned, and won't fit within a quadword + */ + ldq_u $4,0($16) # L : Fetch first partial + bis $16,$16,$5 # E : Save the address + insql $17,$16,$2 # U : Insert new bytes + subq $3,8,$3 # E : Invert (for addressing uses) + + addq $18,$3,$18 # E : $18 is new count ($3 is negative) + mskql $4,$16,$4 # U : clear relevant parts of the quad + subq $16,$3,$16 # E : $16 is new aligned destination + bis $2,$4,$1 # E : Final bytes + + nop + stq_u $1,0($5) # L : Store result + nop + nop + +.align 4 +aligned_w: + /* + * We are now guaranteed to be quad aligned, with at least + * one partial quad to write. + */ + + sra $18,3,$3 # U : Number of remaining quads to write + and $18,7,$18 # E : Number of trailing bytes to write + bis $16,$16,$5 # E : Save dest address + beq $3,no_quad_w # U : tail stuff only + + /* + * it's worth the effort to unroll this and use wh64 if possible + * Lifted a bunch of code from clear_user.S + * At this point, entry values are: + * $16 Current destination address + * $5 A copy of $16 + * $6 The max quadword address to write to + * $18 Number trailer bytes + * $3 Number quads to write + */ + + and $16, 0x3f, $2 # E : Forward work (only useful for unrolled loop) + subq $3, 16, $4 # E : Only try to unroll if > 128 bytes + subq $2, 0x40, $1 # E : bias counter (aligning stuff 0mod64) + blt $4, loop_w # U : + + /* + * We know we've got at least 16 quads, minimum of one trip + * through unrolled loop. Do a quad at a time to get us 0mod64 + * aligned. + */ + + nop # E : + nop # E : + nop # E : + beq $1, $bigalign_w # U : + +$alignmod64_w: + stq $17, 0($5) # L : + subq $3, 1, $3 # E : For consistency later + addq $1, 8, $1 # E : Increment towards zero for alignment + addq $5, 8, $4 # E : Initial wh64 address (filler instruction) + + nop + nop + addq $5, 8, $5 # E : Inc address + blt $1, $alignmod64_w # U : + +$bigalign_w: + /* + * $3 - number quads left to go + * $5 - target address (aligned 0mod64) + * $17 - mask of stuff to store + * Scratch registers available: $7, $2, $4, $1 + * we know that we'll be taking a minimum of one trip through + * CWG Section 3.7.6: do not expect a sustained store rate of > 1/cycle + * Assumes the wh64 needs to be for 2 trips through the loop in the future + * The wh64 is issued on for the starting destination address for trip +2 + * through the loop, and if there are less than two trips left, the target + * address will be for the current trip. + */ + +$do_wh64_w: + wh64 ($4) # L1 : memory subsystem write hint + subq $3, 24, $2 # E : For determining future wh64 addresses + stq $17, 0($5) # L : + nop # E : + + addq $5, 128, $4 # E : speculative target of next wh64 + stq $17, 8($5) # L : + stq $17, 16($5) # L : + addq $5, 64, $7 # E : Fallback address for wh64 (== next trip addr) + + stq $17, 24($5) # L : + stq $17, 32($5) # L : + cmovlt $2, $7, $4 # E : Latency 2, extra mapping cycle + nop + + stq $17, 40($5) # L : + stq $17, 48($5) # L : + subq $3, 16, $2 # E : Repeat the loop at least once more? + nop + + stq $17, 56($5) # L : + addq $5, 64, $5 # E : + subq $3, 8, $3 # E : + bge $2, $do_wh64_w # U : + + nop + nop + nop + beq $3, no_quad_w # U : Might have finished already + +.align 4 + /* + * Simple loop for trailing quadwords, or for small amounts + * of data (where we can't use an unrolled loop and wh64) + */ +loop_w: + stq $17,0($5) # L : + subq $3,1,$3 # E : Decrement number quads left + addq $5,8,$5 # E : Inc address + bne $3,loop_w # U : more? + +no_quad_w: + /* + * Write 0..7 trailing bytes. + */ + nop # E : + beq $18,end_w # U : All done? + ldq $7,0($5) # L : + mskqh $7,$6,$2 # U : Mask final quad + + insqh $17,$6,$4 # U : New bits + bis $2,$4,$1 # E : Put it all together + stq $1,0($5) # L : And back to memory + ret $31,($26),1 # L0 : + +within_quad_w: + ldq_u $1,0($16) # L : + insql $17,$16,$2 # U : New bits + mskql $1,$16,$4 # U : Clear old + bis $2,$4,$2 # E : New result + + mskql $2,$6,$4 # U : + mskqh $1,$6,$2 # U : + bis $2,$4,$1 # E : + stq_u $1,0($16) # L : + +end_w: + nop + nop + nop + ret $31,($26),1 # L0 : + + .end __memset16 + EXPORT_SYMBOL(__memset16) + +memset = ___memset +__memset = ___memset + EXPORT_SYMBOL(memset) + EXPORT_SYMBOL(__memset) diff --git a/arch/alpha/lib/ev6-stxcpy.S b/arch/alpha/lib/ev6-stxcpy.S new file mode 100644 index 0000000000..65f5f7310d --- /dev/null +++ b/arch/alpha/lib/ev6-stxcpy.S @@ -0,0 +1,322 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/alpha/lib/ev6-stxcpy.S + * 21264 version contributed by Rick Gorton <rick.gorton@alpha-processor.com> + * + * Copy a null-terminated string from SRC to DST. + * + * This is an internal routine used by strcpy, stpcpy, and strcat. + * As such, it uses special linkage conventions to make implementation + * of these public functions more efficient. + * + * On input: + * t9 = return address + * a0 = DST + * a1 = SRC + * + * On output: + * t12 = bitmask (with one bit set) indicating the last byte written + * a0 = unaligned address of the last *word* written + * + * Furthermore, v0, a3-a5, t11, and t12 are untouched. + * + * Much of the information about 21264 scheduling/coding comes from: + * Compiler Writer's Guide for the Alpha 21264 + * abbreviated as 'CWG' in other comments here + * ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html + * Scheduling notation: + * E - either cluster + * U - upper subcluster; U0 - subcluster U0; U1 - subcluster U1 + * L - lower subcluster; L0 - subcluster L0; L1 - subcluster L1 + * Try not to change the actual algorithm if possible for consistency. + */ + +#include <asm/regdef.h> + + .set noat + .set noreorder + + .text + +/* There is a problem with either gdb (as of 4.16) or gas (as of 2.7) that + doesn't like putting the entry point for a procedure somewhere in the + middle of the procedure descriptor. Work around this by putting the + aligned copy in its own procedure descriptor */ + + + .ent stxcpy_aligned + .align 4 +stxcpy_aligned: + .frame sp, 0, t9 + .prologue 0 + + /* On entry to this basic block: + t0 == the first destination word for masking back in + t1 == the first source word. */ + + /* Create the 1st output word and detect 0's in the 1st input word. */ + lda t2, -1 # E : build a mask against false zero + mskqh t2, a1, t2 # U : detection in the src word (stall) + mskqh t1, a1, t3 # U : + ornot t1, t2, t2 # E : (stall) + + mskql t0, a1, t0 # U : assemble the first output word + cmpbge zero, t2, t8 # E : bits set iff null found + or t0, t3, t1 # E : (stall) + bne t8, $a_eos # U : (stall) + + /* On entry to this basic block: + t0 == the first destination word for masking back in + t1 == a source word not containing a null. */ + /* Nops here to separate store quads from load quads */ + +$a_loop: + stq_u t1, 0(a0) # L : + addq a0, 8, a0 # E : + nop + nop + + ldq_u t1, 0(a1) # L : Latency=3 + addq a1, 8, a1 # E : + cmpbge zero, t1, t8 # E : (3 cycle stall) + beq t8, $a_loop # U : (stall for t8) + + /* Take care of the final (partial) word store. + On entry to this basic block we have: + t1 == the source word containing the null + t8 == the cmpbge mask that found it. */ +$a_eos: + negq t8, t6 # E : find low bit set + and t8, t6, t12 # E : (stall) + /* For the sake of the cache, don't read a destination word + if we're not going to need it. */ + and t12, 0x80, t6 # E : (stall) + bne t6, 1f # U : (stall) + + /* We're doing a partial word store and so need to combine + our source and original destination words. */ + ldq_u t0, 0(a0) # L : Latency=3 + subq t12, 1, t6 # E : + zapnot t1, t6, t1 # U : clear src bytes >= null (stall) + or t12, t6, t8 # E : (stall) + + zap t0, t8, t0 # E : clear dst bytes <= null + or t0, t1, t1 # E : (stall) + nop + nop + +1: stq_u t1, 0(a0) # L : + ret (t9) # L0 : Latency=3 + nop + nop + + .end stxcpy_aligned + + .align 4 + .ent __stxcpy + .globl __stxcpy +__stxcpy: + .frame sp, 0, t9 + .prologue 0 + + /* Are source and destination co-aligned? */ + xor a0, a1, t0 # E : + unop # E : + and t0, 7, t0 # E : (stall) + bne t0, $unaligned # U : (stall) + + /* We are co-aligned; take care of a partial first word. */ + ldq_u t1, 0(a1) # L : load first src word + and a0, 7, t0 # E : take care not to load a word ... + addq a1, 8, a1 # E : + beq t0, stxcpy_aligned # U : ... if we wont need it (stall) + + ldq_u t0, 0(a0) # L : + br stxcpy_aligned # L0 : Latency=3 + nop + nop + + +/* The source and destination are not co-aligned. Align the destination + and cope. We have to be very careful about not reading too much and + causing a SEGV. */ + + .align 4 +$u_head: + /* We know just enough now to be able to assemble the first + full source word. We can still find a zero at the end of it + that prevents us from outputting the whole thing. + + On entry to this basic block: + t0 == the first dest word, for masking back in, if needed else 0 + t1 == the low bits of the first source word + t6 == bytemask that is -1 in dest word bytes */ + + ldq_u t2, 8(a1) # L : + addq a1, 8, a1 # E : + extql t1, a1, t1 # U : (stall on a1) + extqh t2, a1, t4 # U : (stall on a1) + + mskql t0, a0, t0 # U : + or t1, t4, t1 # E : + mskqh t1, a0, t1 # U : (stall on t1) + or t0, t1, t1 # E : (stall on t1) + + or t1, t6, t6 # E : + cmpbge zero, t6, t8 # E : (stall) + lda t6, -1 # E : for masking just below + bne t8, $u_final # U : (stall) + + mskql t6, a1, t6 # U : mask out the bits we have + or t6, t2, t2 # E : already extracted before (stall) + cmpbge zero, t2, t8 # E : testing eos (stall) + bne t8, $u_late_head_exit # U : (stall) + + /* Finally, we've got all the stupid leading edge cases taken care + of and we can set up to enter the main loop. */ + + stq_u t1, 0(a0) # L : store first output word + addq a0, 8, a0 # E : + extql t2, a1, t0 # U : position ho-bits of lo word + ldq_u t2, 8(a1) # U : read next high-order source word + + addq a1, 8, a1 # E : + cmpbge zero, t2, t8 # E : (stall for t2) + nop # E : + bne t8, $u_eos # U : (stall) + + /* Unaligned copy main loop. In order to avoid reading too much, + the loop is structured to detect zeros in aligned source words. + This has, unfortunately, effectively pulled half of a loop + iteration out into the head and half into the tail, but it does + prevent nastiness from accumulating in the very thing we want + to run as fast as possible. + + On entry to this basic block: + t0 == the shifted high-order bits from the previous source word + t2 == the unshifted current source word + + We further know that t2 does not contain a null terminator. */ + + .align 3 +$u_loop: + extqh t2, a1, t1 # U : extract high bits for current word + addq a1, 8, a1 # E : (stall) + extql t2, a1, t3 # U : extract low bits for next time (stall) + addq a0, 8, a0 # E : + + or t0, t1, t1 # E : current dst word now complete + ldq_u t2, 0(a1) # L : Latency=3 load high word for next time + stq_u t1, -8(a0) # L : save the current word (stall) + mov t3, t0 # E : + + cmpbge zero, t2, t8 # E : test new word for eos + beq t8, $u_loop # U : (stall) + nop + nop + + /* We've found a zero somewhere in the source word we just read. + If it resides in the lower half, we have one (probably partial) + word to write out, and if it resides in the upper half, we + have one full and one partial word left to write out. + + On entry to this basic block: + t0 == the shifted high-order bits from the previous source word + t2 == the unshifted current source word. */ +$u_eos: + extqh t2, a1, t1 # U : + or t0, t1, t1 # E : first (partial) source word complete (stall) + cmpbge zero, t1, t8 # E : is the null in this first bit? (stall) + bne t8, $u_final # U : (stall) + +$u_late_head_exit: + stq_u t1, 0(a0) # L : the null was in the high-order bits + addq a0, 8, a0 # E : + extql t2, a1, t1 # U : + cmpbge zero, t1, t8 # E : (stall) + + /* Take care of a final (probably partial) result word. + On entry to this basic block: + t1 == assembled source word + t8 == cmpbge mask that found the null. */ +$u_final: + negq t8, t6 # E : isolate low bit set + and t6, t8, t12 # E : (stall) + and t12, 0x80, t6 # E : avoid dest word load if we can (stall) + bne t6, 1f # U : (stall) + + ldq_u t0, 0(a0) # E : + subq t12, 1, t6 # E : + or t6, t12, t8 # E : (stall) + zapnot t1, t6, t1 # U : kill source bytes >= null (stall) + + zap t0, t8, t0 # U : kill dest bytes <= null (2 cycle data stall) + or t0, t1, t1 # E : (stall) + nop + nop + +1: stq_u t1, 0(a0) # L : + ret (t9) # L0 : Latency=3 + nop + nop + + /* Unaligned copy entry point. */ + .align 4 +$unaligned: + + ldq_u t1, 0(a1) # L : load first source word + and a0, 7, t4 # E : find dest misalignment + and a1, 7, t5 # E : find src misalignment + /* Conditionally load the first destination word and a bytemask + with 0xff indicating that the destination byte is sacrosanct. */ + mov zero, t0 # E : + + mov zero, t6 # E : + beq t4, 1f # U : + ldq_u t0, 0(a0) # L : + lda t6, -1 # E : + + mskql t6, a0, t6 # U : + nop + nop + nop +1: + subq a1, t4, a1 # E : sub dest misalignment from src addr + /* If source misalignment is larger than dest misalignment, we need + extra startup checks to avoid SEGV. */ + cmplt t4, t5, t12 # E : + beq t12, $u_head # U : + lda t2, -1 # E : mask out leading garbage in source + + mskqh t2, t5, t2 # U : + ornot t1, t2, t3 # E : (stall) + cmpbge zero, t3, t8 # E : is there a zero? (stall) + beq t8, $u_head # U : (stall) + + /* At this point we've found a zero in the first partial word of + the source. We need to isolate the valid source data and mask + it into the original destination data. (Incidentally, we know + that we'll need at least one byte of that original dest word.) */ + + ldq_u t0, 0(a0) # L : + negq t8, t6 # E : build bitmask of bytes <= zero + and t6, t8, t12 # E : (stall) + and a1, 7, t5 # E : + + subq t12, 1, t6 # E : + or t6, t12, t8 # E : (stall) + srl t12, t5, t12 # U : adjust final null return value + zapnot t2, t8, t2 # U : prepare source word; mirror changes (stall) + + and t1, t2, t1 # E : to source validity mask + extql t2, a1, t2 # U : + extql t1, a1, t1 # U : (stall) + andnot t0, t2, t0 # .. e1 : zero place for source to reside (stall) + + or t0, t1, t1 # e1 : and put it there + stq_u t1, 0(a0) # .. e0 : (stall) + ret (t9) # e1 : + nop + + .end __stxcpy + diff --git a/arch/alpha/lib/ev6-stxncpy.S b/arch/alpha/lib/ev6-stxncpy.S new file mode 100644 index 0000000000..76da205282 --- /dev/null +++ b/arch/alpha/lib/ev6-stxncpy.S @@ -0,0 +1,398 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/alpha/lib/ev6-stxncpy.S + * 21264 version contributed by Rick Gorton <rick.gorton@api-networks.com> + * + * Copy no more than COUNT bytes of the null-terminated string from + * SRC to DST. + * + * This is an internal routine used by strncpy, stpncpy, and strncat. + * As such, it uses special linkage conventions to make implementation + * of these public functions more efficient. + * + * On input: + * t9 = return address + * a0 = DST + * a1 = SRC + * a2 = COUNT + * + * Furthermore, COUNT may not be zero. + * + * On output: + * t0 = last word written + * t10 = bitmask (with one bit set) indicating the byte position of + * the end of the range specified by COUNT + * t12 = bitmask (with one bit set) indicating the last byte written + * a0 = unaligned address of the last *word* written + * a2 = the number of full words left in COUNT + * + * Furthermore, v0, a3-a5, t11, and $at are untouched. + * + * Much of the information about 21264 scheduling/coding comes from: + * Compiler Writer's Guide for the Alpha 21264 + * abbreviated as 'CWG' in other comments here + * ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html + * Scheduling notation: + * E - either cluster + * U - upper subcluster; U0 - subcluster U0; U1 - subcluster U1 + * L - lower subcluster; L0 - subcluster L0; L1 - subcluster L1 + * Try not to change the actual algorithm if possible for consistency. + */ + +#include <asm/regdef.h> + + .set noat + .set noreorder + + .text + +/* There is a problem with either gdb (as of 4.16) or gas (as of 2.7) that + doesn't like putting the entry point for a procedure somewhere in the + middle of the procedure descriptor. Work around this by putting the + aligned copy in its own procedure descriptor */ + + + .ent stxncpy_aligned + .align 4 +stxncpy_aligned: + .frame sp, 0, t9, 0 + .prologue 0 + + /* On entry to this basic block: + t0 == the first destination word for masking back in + t1 == the first source word. */ + + /* Create the 1st output word and detect 0's in the 1st input word. */ + lda t2, -1 # E : build a mask against false zero + mskqh t2, a1, t2 # U : detection in the src word (stall) + mskqh t1, a1, t3 # U : + ornot t1, t2, t2 # E : (stall) + + mskql t0, a1, t0 # U : assemble the first output word + cmpbge zero, t2, t8 # E : bits set iff null found + or t0, t3, t0 # E : (stall) + beq a2, $a_eoc # U : + + bne t8, $a_eos # U : + nop + nop + nop + + /* On entry to this basic block: + t0 == a source word not containing a null. */ + + /* + * nops here to: + * separate store quads from load quads + * limit of 1 bcond/quad to permit training + */ +$a_loop: + stq_u t0, 0(a0) # L : + addq a0, 8, a0 # E : + subq a2, 1, a2 # E : + nop + + ldq_u t0, 0(a1) # L : + addq a1, 8, a1 # E : + cmpbge zero, t0, t8 # E : + beq a2, $a_eoc # U : + + beq t8, $a_loop # U : + nop + nop + nop + + /* Take care of the final (partial) word store. At this point + the end-of-count bit is set in t8 iff it applies. + + On entry to this basic block we have: + t0 == the source word containing the null + t8 == the cmpbge mask that found it. */ + +$a_eos: + negq t8, t12 # E : find low bit set + and t8, t12, t12 # E : (stall) + /* For the sake of the cache, don't read a destination word + if we're not going to need it. */ + and t12, 0x80, t6 # E : (stall) + bne t6, 1f # U : (stall) + + /* We're doing a partial word store and so need to combine + our source and original destination words. */ + ldq_u t1, 0(a0) # L : + subq t12, 1, t6 # E : + or t12, t6, t8 # E : (stall) + zapnot t0, t8, t0 # U : clear src bytes > null (stall) + + zap t1, t8, t1 # .. e1 : clear dst bytes <= null + or t0, t1, t0 # e1 : (stall) + nop + nop + +1: stq_u t0, 0(a0) # L : + ret (t9) # L0 : Latency=3 + nop + nop + + /* Add the end-of-count bit to the eos detection bitmask. */ +$a_eoc: + or t10, t8, t8 # E : + br $a_eos # L0 : Latency=3 + nop + nop + + .end stxncpy_aligned + + .align 4 + .ent __stxncpy + .globl __stxncpy +__stxncpy: + .frame sp, 0, t9, 0 + .prologue 0 + + /* Are source and destination co-aligned? */ + xor a0, a1, t1 # E : + and a0, 7, t0 # E : find dest misalignment + and t1, 7, t1 # E : (stall) + addq a2, t0, a2 # E : bias count by dest misalignment (stall) + + subq a2, 1, a2 # E : + and a2, 7, t2 # E : (stall) + srl a2, 3, a2 # U : a2 = loop counter = (count - 1)/8 (stall) + addq zero, 1, t10 # E : + + sll t10, t2, t10 # U : t10 = bitmask of last count byte + bne t1, $unaligned # U : + /* We are co-aligned; take care of a partial first word. */ + ldq_u t1, 0(a1) # L : load first src word + addq a1, 8, a1 # E : + + beq t0, stxncpy_aligned # U : avoid loading dest word if not needed + ldq_u t0, 0(a0) # L : + nop + nop + + br stxncpy_aligned # .. e1 : + nop + nop + nop + + + +/* The source and destination are not co-aligned. Align the destination + and cope. We have to be very careful about not reading too much and + causing a SEGV. */ + + .align 4 +$u_head: + /* We know just enough now to be able to assemble the first + full source word. We can still find a zero at the end of it + that prevents us from outputting the whole thing. + + On entry to this basic block: + t0 == the first dest word, unmasked + t1 == the shifted low bits of the first source word + t6 == bytemask that is -1 in dest word bytes */ + + ldq_u t2, 8(a1) # L : Latency=3 load second src word + addq a1, 8, a1 # E : + mskql t0, a0, t0 # U : mask trailing garbage in dst + extqh t2, a1, t4 # U : (3 cycle stall on t2) + + or t1, t4, t1 # E : first aligned src word complete (stall) + mskqh t1, a0, t1 # U : mask leading garbage in src (stall) + or t0, t1, t0 # E : first output word complete (stall) + or t0, t6, t6 # E : mask original data for zero test (stall) + + cmpbge zero, t6, t8 # E : + beq a2, $u_eocfin # U : + lda t6, -1 # E : + nop + + bne t8, $u_final # U : + mskql t6, a1, t6 # U : mask out bits already seen + stq_u t0, 0(a0) # L : store first output word + or t6, t2, t2 # E : (stall) + + cmpbge zero, t2, t8 # E : find nulls in second partial + addq a0, 8, a0 # E : + subq a2, 1, a2 # E : + bne t8, $u_late_head_exit # U : + + /* Finally, we've got all the stupid leading edge cases taken care + of and we can set up to enter the main loop. */ + extql t2, a1, t1 # U : position hi-bits of lo word + beq a2, $u_eoc # U : + ldq_u t2, 8(a1) # L : read next high-order source word + addq a1, 8, a1 # E : + + extqh t2, a1, t0 # U : position lo-bits of hi word (stall) + cmpbge zero, t2, t8 # E : + nop + bne t8, $u_eos # U : + + /* Unaligned copy main loop. In order to avoid reading too much, + the loop is structured to detect zeros in aligned source words. + This has, unfortunately, effectively pulled half of a loop + iteration out into the head and half into the tail, but it does + prevent nastiness from accumulating in the very thing we want + to run as fast as possible. + + On entry to this basic block: + t0 == the shifted low-order bits from the current source word + t1 == the shifted high-order bits from the previous source word + t2 == the unshifted current source word + + We further know that t2 does not contain a null terminator. */ + + .align 4 +$u_loop: + or t0, t1, t0 # E : current dst word now complete + subq a2, 1, a2 # E : decrement word count + extql t2, a1, t1 # U : extract low bits for next time + addq a0, 8, a0 # E : + + stq_u t0, -8(a0) # U : save the current word + beq a2, $u_eoc # U : + ldq_u t2, 8(a1) # U : Latency=3 load high word for next time + addq a1, 8, a1 # E : + + extqh t2, a1, t0 # U : extract low bits (2 cycle stall) + cmpbge zero, t2, t8 # E : test new word for eos + nop + beq t8, $u_loop # U : + + /* We've found a zero somewhere in the source word we just read. + If it resides in the lower half, we have one (probably partial) + word to write out, and if it resides in the upper half, we + have one full and one partial word left to write out. + + On entry to this basic block: + t0 == the shifted low-order bits from the current source word + t1 == the shifted high-order bits from the previous source word + t2 == the unshifted current source word. */ +$u_eos: + or t0, t1, t0 # E : first (partial) source word complete + nop + cmpbge zero, t0, t8 # E : is the null in this first bit? (stall) + bne t8, $u_final # U : (stall) + + stq_u t0, 0(a0) # L : the null was in the high-order bits + addq a0, 8, a0 # E : + subq a2, 1, a2 # E : + nop + +$u_late_head_exit: + extql t2, a1, t0 # U : + cmpbge zero, t0, t8 # E : + or t8, t10, t6 # E : (stall) + cmoveq a2, t6, t8 # E : Latency=2, extra map slot (stall) + + /* Take care of a final (probably partial) result word. + On entry to this basic block: + t0 == assembled source word + t8 == cmpbge mask that found the null. */ +$u_final: + negq t8, t6 # E : isolate low bit set + and t6, t8, t12 # E : (stall) + and t12, 0x80, t6 # E : avoid dest word load if we can (stall) + bne t6, 1f # U : (stall) + + ldq_u t1, 0(a0) # L : + subq t12, 1, t6 # E : + or t6, t12, t8 # E : (stall) + zapnot t0, t8, t0 # U : kill source bytes > null + + zap t1, t8, t1 # U : kill dest bytes <= null + or t0, t1, t0 # E : (stall) + nop + nop + +1: stq_u t0, 0(a0) # L : + ret (t9) # L0 : Latency=3 + + /* Got to end-of-count before end of string. + On entry to this basic block: + t1 == the shifted high-order bits from the previous source word */ +$u_eoc: + and a1, 7, t6 # E : avoid final load if possible + sll t10, t6, t6 # U : (stall) + and t6, 0xff, t6 # E : (stall) + bne t6, 1f # U : (stall) + + ldq_u t2, 8(a1) # L : load final src word + nop + extqh t2, a1, t0 # U : extract low bits for last word (stall) + or t1, t0, t1 # E : (stall) + +1: cmpbge zero, t1, t8 # E : + mov t1, t0 # E : + +$u_eocfin: # end-of-count, final word + or t10, t8, t8 # E : + br $u_final # L0 : Latency=3 + + /* Unaligned copy entry point. */ + .align 4 +$unaligned: + + ldq_u t1, 0(a1) # L : load first source word + and a0, 7, t4 # E : find dest misalignment + and a1, 7, t5 # E : find src misalignment + /* Conditionally load the first destination word and a bytemask + with 0xff indicating that the destination byte is sacrosanct. */ + mov zero, t0 # E : + + mov zero, t6 # E : + beq t4, 1f # U : + ldq_u t0, 0(a0) # L : + lda t6, -1 # E : + + mskql t6, a0, t6 # U : + nop + nop + subq a1, t4, a1 # E : sub dest misalignment from src addr + + /* If source misalignment is larger than dest misalignment, we need + extra startup checks to avoid SEGV. */ + +1: cmplt t4, t5, t12 # E : + extql t1, a1, t1 # U : shift src into place + lda t2, -1 # E : for creating masks later + beq t12, $u_head # U : (stall) + + extql t2, a1, t2 # U : + cmpbge zero, t1, t8 # E : is there a zero? + andnot t2, t6, t2 # E : dest mask for a single word copy + or t8, t10, t5 # E : test for end-of-count too + + cmpbge zero, t2, t3 # E : + cmoveq a2, t5, t8 # E : Latency=2, extra map slot + nop # E : keep with cmoveq + andnot t8, t3, t8 # E : (stall) + + beq t8, $u_head # U : + /* At this point we've found a zero in the first partial word of + the source. We need to isolate the valid source data and mask + it into the original destination data. (Incidentally, we know + that we'll need at least one byte of that original dest word.) */ + ldq_u t0, 0(a0) # L : + negq t8, t6 # E : build bitmask of bytes <= zero + mskqh t1, t4, t1 # U : + + and t6, t8, t12 # E : + subq t12, 1, t6 # E : (stall) + or t6, t12, t8 # E : (stall) + zapnot t2, t8, t2 # U : prepare source word; mirror changes (stall) + + zapnot t1, t8, t1 # U : to source validity mask + andnot t0, t2, t0 # E : zero place for source to reside + or t0, t1, t0 # E : and put it there (stall both t0, t1) + stq_u t0, 0(a0) # L : (stall) + + ret (t9) # L0 : Latency=3 + nop + nop + nop + + .end __stxncpy diff --git a/arch/alpha/lib/ev67-strcat.S b/arch/alpha/lib/ev67-strcat.S new file mode 100644 index 0000000000..f8c7305b11 --- /dev/null +++ b/arch/alpha/lib/ev67-strcat.S @@ -0,0 +1,56 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/alpha/lib/ev67-strcat.S + * 21264 version contributed by Rick Gorton <rick.gorton@alpha-processor.com> + * + * Append a null-terminated string from SRC to DST. + * + * Much of the information about 21264 scheduling/coding comes from: + * Compiler Writer's Guide for the Alpha 21264 + * abbreviated as 'CWG' in other comments here + * ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html + * Scheduling notation: + * E - either cluster + * U - upper subcluster; U0 - subcluster U0; U1 - subcluster U1 + * L - lower subcluster; L0 - subcluster L0; L1 - subcluster L1 + * Try not to change the actual algorithm if possible for consistency. + * Commentary: It seems bogus to walk the input string twice - once + * to determine the length, and then again while doing the copy. + * A significant (future) enhancement would be to only read the input + * string once. + */ + +#include <linux/export.h> + .text + + .align 4 + .globl strcat + .ent strcat +strcat: + .frame $30, 0, $26 + .prologue 0 + + mov $16, $0 # E : set up return value + /* Find the end of the string. */ + ldq_u $1, 0($16) # L : load first quadword (a0 may be misaligned) + lda $2, -1 # E : + insqh $2, $16, $2 # U : + + andnot $16, 7, $16 # E : + or $2, $1, $1 # E : + cmpbge $31, $1, $2 # E : bits set iff byte == 0 + bne $2, $found # U : + +$loop: ldq $1, 8($16) # L : + addq $16, 8, $16 # E : + cmpbge $31, $1, $2 # E : + beq $2, $loop # U : + +$found: cttz $2, $3 # U0 : + addq $16, $3, $16 # E : + /* Now do the append. */ + mov $26, $23 # E : + br __stxcpy # L0 : + + .end strcat + EXPORT_SYMBOL(strcat) diff --git a/arch/alpha/lib/ev67-strchr.S b/arch/alpha/lib/ev67-strchr.S new file mode 100644 index 0000000000..97a7cb4753 --- /dev/null +++ b/arch/alpha/lib/ev67-strchr.S @@ -0,0 +1,90 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/alpha/lib/ev67-strchr.S + * 21264 version contributed by Rick Gorton <rick.gorton@alpha-processor.com> + * + * Return the address of a given character within a null-terminated + * string, or null if it is not found. + * + * Much of the information about 21264 scheduling/coding comes from: + * Compiler Writer's Guide for the Alpha 21264 + * abbreviated as 'CWG' in other comments here + * ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html + * Scheduling notation: + * E - either cluster + * U - upper subcluster; U0 - subcluster U0; U1 - subcluster U1 + * L - lower subcluster; L0 - subcluster L0; L1 - subcluster L1 + * Try not to change the actual algorithm if possible for consistency. + */ +#include <linux/export.h> +#include <asm/regdef.h> + + .set noreorder + .set noat + + .align 4 + .globl strchr + .ent strchr +strchr: + .frame sp, 0, ra + .prologue 0 + + ldq_u t0, 0(a0) # L : load first quadword Latency=3 + and a1, 0xff, t3 # E : 00000000000000ch + insbl a1, 1, t5 # U : 000000000000ch00 + insbl a1, 7, a2 # U : ch00000000000000 + + insbl t3, 6, a3 # U : 00ch000000000000 + or t5, t3, a1 # E : 000000000000chch + andnot a0, 7, v0 # E : align our loop pointer + lda t4, -1 # E : build garbage mask + + mskqh t4, a0, t4 # U : only want relevant part of first quad + or a2, a3, a2 # E : chch000000000000 + inswl a1, 2, t5 # E : 00000000chch0000 + inswl a1, 4, a3 # E : 0000chch00000000 + + or a1, a2, a1 # E : chch00000000chch + or a3, t5, t5 # E : 0000chchchch0000 + cmpbge zero, t0, t2 # E : bits set iff byte == zero + cmpbge zero, t4, t4 # E : bits set iff byte is garbage + + /* This quad is _very_ serialized. Lots of stalling happens */ + or t5, a1, a1 # E : chchchchchchchch + xor t0, a1, t1 # E : make bytes == c zero + cmpbge zero, t1, t3 # E : bits set iff byte == c + or t2, t3, t0 # E : bits set iff char match or zero match + + andnot t0, t4, t0 # E : clear garbage bits + cttz t0, a2 # U0 : speculative (in case we get a match) + nop # E : + bne t0, $found # U : + + /* + * Yuk. This loop is going to stall like crazy waiting for the + * data to be loaded. Not much can be done about it unless it's + * unrolled multiple times - is that safe to do in kernel space? + * Or would exception handling recovery code do the trick here? + */ +$loop: ldq t0, 8(v0) # L : Latency=3 + addq v0, 8, v0 # E : + xor t0, a1, t1 # E : + cmpbge zero, t0, t2 # E : bits set iff byte == 0 + + cmpbge zero, t1, t3 # E : bits set iff byte == c + or t2, t3, t0 # E : + cttz t3, a2 # U0 : speculative (in case we get a match) + beq t0, $loop # U : + +$found: negq t0, t1 # E : clear all but least set bit + and t0, t1, t0 # E : + and t0, t3, t1 # E : bit set iff byte was the char + addq v0, a2, v0 # E : Add in the bit number from above + + cmoveq t1, $31, v0 # E : Two mapping slots, latency = 2 + nop + nop + ret # L0 : + + .end strchr + EXPORT_SYMBOL(strchr) diff --git a/arch/alpha/lib/ev67-strlen.S b/arch/alpha/lib/ev67-strlen.S new file mode 100644 index 0000000000..3d9078807a --- /dev/null +++ b/arch/alpha/lib/ev67-strlen.S @@ -0,0 +1,51 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/alpha/lib/ev67-strlen.S + * 21264 version by Rick Gorton <rick.gorton@alpha-processor.com> + * + * Finds length of a 0-terminated string. Optimized for the + * Alpha architecture: + * + * - memory accessed as aligned quadwords only + * - uses bcmpge to compare 8 bytes in parallel + * + * Much of the information about 21264 scheduling/coding comes from: + * Compiler Writer's Guide for the Alpha 21264 + * abbreviated as 'CWG' in other comments here + * ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html + * Scheduling notation: + * E - either cluster + * U - upper subcluster; U0 - subcluster U0; U1 - subcluster U1 + * L - lower subcluster; L0 - subcluster L0; L1 - subcluster L1 + */ +#include <linux/export.h> + .set noreorder + .set noat + + .globl strlen + .ent strlen + .align 4 +strlen: + ldq_u $1, 0($16) # L : load first quadword ($16 may be misaligned) + lda $2, -1($31) # E : + insqh $2, $16, $2 # U : + andnot $16, 7, $0 # E : + + or $2, $1, $1 # E : + cmpbge $31, $1, $2 # E : $2 <- bitmask: bit i == 1 <==> i-th byte == 0 + nop # E : + bne $2, $found # U : + +$loop: ldq $1, 8($0) # L : + addq $0, 8, $0 # E : addr += 8 + cmpbge $31, $1, $2 # E : + beq $2, $loop # U : + +$found: + cttz $2, $3 # U0 : + addq $0, $3, $0 # E : + subq $0, $16, $0 # E : + ret $31, ($26) # L0 : + + .end strlen + EXPORT_SYMBOL(strlen) diff --git a/arch/alpha/lib/ev67-strncat.S b/arch/alpha/lib/ev67-strncat.S new file mode 100644 index 0000000000..8f313233e3 --- /dev/null +++ b/arch/alpha/lib/ev67-strncat.S @@ -0,0 +1,96 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/alpha/lib/ev67-strncat.S + * 21264 version contributed by Rick Gorton <rick.gorton@api-networks.com> + * + * Append no more than COUNT characters from the null-terminated string SRC + * to the null-terminated string DST. Always null-terminate the new DST. + * + * This differs slightly from the semantics in libc in that we never write + * past count, whereas libc may write to count+1. This follows the generic + * implementation in lib/string.c and is, IMHO, more sensible. + * + * Much of the information about 21264 scheduling/coding comes from: + * Compiler Writer's Guide for the Alpha 21264 + * abbreviated as 'CWG' in other comments here + * ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html + * Scheduling notation: + * E - either cluster + * U - upper subcluster; U0 - subcluster U0; U1 - subcluster U1 + * L - lower subcluster; L0 - subcluster L0; L1 - subcluster L1 + * Try not to change the actual algorithm if possible for consistency. + */ + +#include <linux/export.h> + .text + + .align 4 + .globl strncat + .ent strncat +strncat: + .frame $30, 0, $26 + .prologue 0 + + mov $16, $0 # set up return value + beq $18, $zerocount # U : + /* Find the end of the string. */ + ldq_u $1, 0($16) # L : load first quadword ($16 may be misaligned) + lda $2, -1($31) # E : + + insqh $2, $0, $2 # U : + andnot $16, 7, $16 # E : + nop # E : + or $2, $1, $1 # E : + + nop # E : + nop # E : + cmpbge $31, $1, $2 # E : bits set iff byte == 0 + bne $2, $found # U : + +$loop: ldq $1, 8($16) # L : + addq $16, 8, $16 # E : + cmpbge $31, $1, $2 # E : + beq $2, $loop # U : + +$found: cttz $2, $3 # U0 : + addq $16, $3, $16 # E : + nop # E : + bsr $23, __stxncpy # L0 :/* Now do the append. */ + + /* Worry about the null termination. */ + + zapnot $1, $27, $2 # U : was last byte a null? + cmplt $27, $24, $5 # E : did we fill the buffer completely? + bne $2, 0f # U : + ret # L0 : + +0: or $5, $18, $2 # E : + nop + bne $2, 2f # U : + and $24, 0x80, $3 # E : no zero next byte + + nop # E : + bne $3, 1f # U : + /* Here there are bytes left in the current word. Clear one. */ + addq $24, $24, $24 # E : end-of-count bit <<= 1 + nop # E : + +2: zap $1, $24, $1 # U : + nop # E : + stq_u $1, 0($16) # L : + ret # L0 : + +1: /* Here we must clear the first byte of the next DST word */ + stb $31, 8($16) # L : + nop # E : + nop # E : + ret # L0 : + +$zerocount: + nop # E : + nop # E : + nop # E : + ret # L0 : + + .end strncat + EXPORT_SYMBOL(strncat) diff --git a/arch/alpha/lib/ev67-strrchr.S b/arch/alpha/lib/ev67-strrchr.S new file mode 100644 index 0000000000..ae7355f9ec --- /dev/null +++ b/arch/alpha/lib/ev67-strrchr.S @@ -0,0 +1,111 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/alpha/lib/ev67-strrchr.S + * 21264 version by Rick Gorton <rick.gorton@alpha-processor.com> + * + * Finds length of a 0-terminated string. Optimized for the + * Alpha architecture: + * + * - memory accessed as aligned quadwords only + * - uses bcmpge to compare 8 bytes in parallel + * + * Much of the information about 21264 scheduling/coding comes from: + * Compiler Writer's Guide for the Alpha 21264 + * abbreviated as 'CWG' in other comments here + * ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html + * Scheduling notation: + * E - either cluster + * U - upper subcluster; U0 - subcluster U0; U1 - subcluster U1 + * L - lower subcluster; L0 - subcluster L0; L1 - subcluster L1 + */ + +#include <linux/export.h> +#include <asm/regdef.h> + + .set noreorder + .set noat + + .align 4 + .ent strrchr + .globl strrchr +strrchr: + .frame sp, 0, ra + .prologue 0 + + and a1, 0xff, t2 # E : 00000000000000ch + insbl a1, 1, t4 # U : 000000000000ch00 + insbl a1, 2, t5 # U : 0000000000ch0000 + ldq_u t0, 0(a0) # L : load first quadword Latency=3 + + mov zero, t6 # E : t6 is last match aligned addr + or t2, t4, a1 # E : 000000000000chch + sll t5, 8, t3 # U : 00000000ch000000 + mov zero, t8 # E : t8 is last match byte compare mask + + andnot a0, 7, v0 # E : align source addr + or t5, t3, t3 # E : 00000000chch0000 + sll a1, 32, t2 # U : 0000chch00000000 + sll a1, 48, t4 # U : chch000000000000 + + or t4, a1, a1 # E : chch00000000chch + or t2, t3, t2 # E : 0000chchchch0000 + or a1, t2, a1 # E : chchchchchchchch + lda t5, -1 # E : build garbage mask + + cmpbge zero, t0, t1 # E : bits set iff byte == zero + mskqh t5, a0, t4 # E : Complete garbage mask + xor t0, a1, t2 # E : make bytes == c zero + cmpbge zero, t4, t4 # E : bits set iff byte is garbage + + cmpbge zero, t2, t3 # E : bits set iff byte == c + andnot t1, t4, t1 # E : clear garbage from null test + andnot t3, t4, t3 # E : clear garbage from char test + bne t1, $eos # U : did we already hit the terminator? + + /* Character search main loop */ +$loop: + ldq t0, 8(v0) # L : load next quadword + cmovne t3, v0, t6 # E : save previous comparisons match + nop # : Latency=2, extra map slot (keep nop with cmov) + nop + + cmovne t3, t3, t8 # E : Latency=2, extra map slot + nop # : keep with cmovne + addq v0, 8, v0 # E : + xor t0, a1, t2 # E : + + cmpbge zero, t0, t1 # E : bits set iff byte == zero + cmpbge zero, t2, t3 # E : bits set iff byte == c + beq t1, $loop # U : if we havnt seen a null, loop + nop + + /* Mask out character matches after terminator */ +$eos: + negq t1, t4 # E : isolate first null byte match + and t1, t4, t4 # E : + subq t4, 1, t5 # E : build a mask of the bytes up to... + or t4, t5, t4 # E : ... and including the null + + and t3, t4, t3 # E : mask out char matches after null + cmovne t3, t3, t8 # E : save it, if match found Latency=2, extra map slot + nop # : Keep with cmovne + nop + + cmovne t3, v0, t6 # E : + nop # : Keep with cmovne + /* Locate the address of the last matched character */ + ctlz t8, t2 # U0 : Latency=3 (0x40 for t8=0) + nop + + cmoveq t8, 0x3f, t2 # E : Compensate for case when no match is seen + nop # E : hide the cmov latency (2) behind ctlz latency + lda t5, 0x3f($31) # E : + subq t5, t2, t5 # E : Normalize leading zero count + + addq t6, t5, v0 # E : and add to quadword address + ret # L0 : Latency=3 + nop + nop + + .end strrchr + EXPORT_SYMBOL(strrchr) diff --git a/arch/alpha/lib/fls.c b/arch/alpha/lib/fls.c new file mode 100644 index 0000000000..02e1567766 --- /dev/null +++ b/arch/alpha/lib/fls.c @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * arch/alpha/lib/fls.c + */ + +#include <linux/module.h> +#include <linux/bitops.h> + +/* This is fls(x)-1, except zero is held to zero. This allows most + efficient input into extbl, plus it allows easy handling of fls(0)=0. */ + +const unsigned char __flsm1_tab[256] = +{ + 0, + 0, + 1, 1, + 2, 2, 2, 2, + 3, 3, 3, 3, 3, 3, 3, 3, + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + + 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, + 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, + + 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, + 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, + 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, + 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, + + 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, + 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, + 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, + 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, + 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, + 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, + 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, + 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, +}; + +EXPORT_SYMBOL(__flsm1_tab); diff --git a/arch/alpha/lib/fpreg.c b/arch/alpha/lib/fpreg.c new file mode 100644 index 0000000000..7c08b22526 --- /dev/null +++ b/arch/alpha/lib/fpreg.c @@ -0,0 +1,232 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * arch/alpha/lib/fpreg.c + * + * (C) Copyright 1998 Linus Torvalds + */ + +#include <linux/compiler.h> +#include <linux/export.h> +#include <linux/preempt.h> +#include <asm/thread_info.h> + +#if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67) +#define STT(reg,val) asm volatile ("ftoit $f"#reg",%0" : "=r"(val)); +#else +#define STT(reg,val) asm volatile ("stt $f"#reg",%0" : "=m"(val)); +#endif + +unsigned long +alpha_read_fp_reg (unsigned long reg) +{ + unsigned long val; + + if (unlikely(reg >= 32)) + return 0; + preempt_disable(); + if (current_thread_info()->status & TS_SAVED_FP) + val = current_thread_info()->fp[reg]; + else switch (reg) { + case 0: STT( 0, val); break; + case 1: STT( 1, val); break; + case 2: STT( 2, val); break; + case 3: STT( 3, val); break; + case 4: STT( 4, val); break; + case 5: STT( 5, val); break; + case 6: STT( 6, val); break; + case 7: STT( 7, val); break; + case 8: STT( 8, val); break; + case 9: STT( 9, val); break; + case 10: STT(10, val); break; + case 11: STT(11, val); break; + case 12: STT(12, val); break; + case 13: STT(13, val); break; + case 14: STT(14, val); break; + case 15: STT(15, val); break; + case 16: STT(16, val); break; + case 17: STT(17, val); break; + case 18: STT(18, val); break; + case 19: STT(19, val); break; + case 20: STT(20, val); break; + case 21: STT(21, val); break; + case 22: STT(22, val); break; + case 23: STT(23, val); break; + case 24: STT(24, val); break; + case 25: STT(25, val); break; + case 26: STT(26, val); break; + case 27: STT(27, val); break; + case 28: STT(28, val); break; + case 29: STT(29, val); break; + case 30: STT(30, val); break; + case 31: STT(31, val); break; + } + preempt_enable(); + return val; +} +EXPORT_SYMBOL(alpha_read_fp_reg); + +#if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67) +#define LDT(reg,val) asm volatile ("itoft %0,$f"#reg : : "r"(val)); +#else +#define LDT(reg,val) asm volatile ("ldt $f"#reg",%0" : : "m"(val)); +#endif + +void +alpha_write_fp_reg (unsigned long reg, unsigned long val) +{ + if (unlikely(reg >= 32)) + return; + + preempt_disable(); + if (current_thread_info()->status & TS_SAVED_FP) { + current_thread_info()->status |= TS_RESTORE_FP; + current_thread_info()->fp[reg] = val; + } else switch (reg) { + case 0: LDT( 0, val); break; + case 1: LDT( 1, val); break; + case 2: LDT( 2, val); break; + case 3: LDT( 3, val); break; + case 4: LDT( 4, val); break; + case 5: LDT( 5, val); break; + case 6: LDT( 6, val); break; + case 7: LDT( 7, val); break; + case 8: LDT( 8, val); break; + case 9: LDT( 9, val); break; + case 10: LDT(10, val); break; + case 11: LDT(11, val); break; + case 12: LDT(12, val); break; + case 13: LDT(13, val); break; + case 14: LDT(14, val); break; + case 15: LDT(15, val); break; + case 16: LDT(16, val); break; + case 17: LDT(17, val); break; + case 18: LDT(18, val); break; + case 19: LDT(19, val); break; + case 20: LDT(20, val); break; + case 21: LDT(21, val); break; + case 22: LDT(22, val); break; + case 23: LDT(23, val); break; + case 24: LDT(24, val); break; + case 25: LDT(25, val); break; + case 26: LDT(26, val); break; + case 27: LDT(27, val); break; + case 28: LDT(28, val); break; + case 29: LDT(29, val); break; + case 30: LDT(30, val); break; + case 31: LDT(31, val); break; + } + preempt_enable(); +} +EXPORT_SYMBOL(alpha_write_fp_reg); + +#if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67) +#define STS(reg,val) asm volatile ("ftois $f"#reg",%0" : "=r"(val)); +#else +#define STS(reg,val) asm volatile ("sts $f"#reg",%0" : "=m"(val)); +#endif + +unsigned long +alpha_read_fp_reg_s (unsigned long reg) +{ + unsigned long val; + + if (unlikely(reg >= 32)) + return 0; + + preempt_disable(); + if (current_thread_info()->status & TS_SAVED_FP) { + LDT(0, current_thread_info()->fp[reg]); + STS(0, val); + } else switch (reg) { + case 0: STS( 0, val); break; + case 1: STS( 1, val); break; + case 2: STS( 2, val); break; + case 3: STS( 3, val); break; + case 4: STS( 4, val); break; + case 5: STS( 5, val); break; + case 6: STS( 6, val); break; + case 7: STS( 7, val); break; + case 8: STS( 8, val); break; + case 9: STS( 9, val); break; + case 10: STS(10, val); break; + case 11: STS(11, val); break; + case 12: STS(12, val); break; + case 13: STS(13, val); break; + case 14: STS(14, val); break; + case 15: STS(15, val); break; + case 16: STS(16, val); break; + case 17: STS(17, val); break; + case 18: STS(18, val); break; + case 19: STS(19, val); break; + case 20: STS(20, val); break; + case 21: STS(21, val); break; + case 22: STS(22, val); break; + case 23: STS(23, val); break; + case 24: STS(24, val); break; + case 25: STS(25, val); break; + case 26: STS(26, val); break; + case 27: STS(27, val); break; + case 28: STS(28, val); break; + case 29: STS(29, val); break; + case 30: STS(30, val); break; + case 31: STS(31, val); break; + } + preempt_enable(); + return val; +} +EXPORT_SYMBOL(alpha_read_fp_reg_s); + +#if defined(CONFIG_ALPHA_EV6) || defined(CONFIG_ALPHA_EV67) +#define LDS(reg,val) asm volatile ("itofs %0,$f"#reg : : "r"(val)); +#else +#define LDS(reg,val) asm volatile ("lds $f"#reg",%0" : : "m"(val)); +#endif + +void +alpha_write_fp_reg_s (unsigned long reg, unsigned long val) +{ + if (unlikely(reg >= 32)) + return; + + preempt_disable(); + if (current_thread_info()->status & TS_SAVED_FP) { + current_thread_info()->status |= TS_RESTORE_FP; + LDS(0, val); + STT(0, current_thread_info()->fp[reg]); + } else switch (reg) { + case 0: LDS( 0, val); break; + case 1: LDS( 1, val); break; + case 2: LDS( 2, val); break; + case 3: LDS( 3, val); break; + case 4: LDS( 4, val); break; + case 5: LDS( 5, val); break; + case 6: LDS( 6, val); break; + case 7: LDS( 7, val); break; + case 8: LDS( 8, val); break; + case 9: LDS( 9, val); break; + case 10: LDS(10, val); break; + case 11: LDS(11, val); break; + case 12: LDS(12, val); break; + case 13: LDS(13, val); break; + case 14: LDS(14, val); break; + case 15: LDS(15, val); break; + case 16: LDS(16, val); break; + case 17: LDS(17, val); break; + case 18: LDS(18, val); break; + case 19: LDS(19, val); break; + case 20: LDS(20, val); break; + case 21: LDS(21, val); break; + case 22: LDS(22, val); break; + case 23: LDS(23, val); break; + case 24: LDS(24, val); break; + case 25: LDS(25, val); break; + case 26: LDS(26, val); break; + case 27: LDS(27, val); break; + case 28: LDS(28, val); break; + case 29: LDS(29, val); break; + case 30: LDS(30, val); break; + case 31: LDS(31, val); break; + } + preempt_enable(); +} +EXPORT_SYMBOL(alpha_write_fp_reg_s); diff --git a/arch/alpha/lib/memchr.S b/arch/alpha/lib/memchr.S new file mode 100644 index 0000000000..45366e32fe --- /dev/null +++ b/arch/alpha/lib/memchr.S @@ -0,0 +1,165 @@ +/* Copyright (C) 1996 Free Software Foundation, Inc. + This file is part of the GNU C Library. + Contributed by David Mosberger (davidm@cs.arizona.edu). + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Library General Public License as + published by the Free Software Foundation; either version 2 of the + License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Library General Public License for more details. + + You should have received a copy of the GNU Library General Public + License along with the GNU C Library; see the file COPYING.LIB. If not, + write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, + Boston, MA 02111-1307, USA. */ + +/* Finds characters in a memory area. Optimized for the Alpha: + + - memory accessed as aligned quadwords only + - uses cmpbge to compare 8 bytes in parallel + - does binary search to find 0 byte in last + quadword (HAKMEM needed 12 instructions to + do this instead of the 9 instructions that + binary search needs). + +For correctness consider that: + + - only minimum number of quadwords may be accessed + - the third argument is an unsigned long +*/ +#include <linux/export.h> + .set noreorder + .set noat + + .globl memchr + .ent memchr +memchr: + .frame $30,0,$26,0 + .prologue 0 + + # Hack -- if someone passes in (size_t)-1, hoping to just + # search til the end of the address space, we will overflow + # below when we find the address of the last byte. Given + # that we will never have a 56-bit address space, cropping + # the length is the easiest way to avoid trouble. + zap $18, 0x80, $5 #-e0 : + + beq $18, $not_found # .. e1 : + ldq_u $1, 0($16) # e1 : load first quadword + insbl $17, 1, $2 # .. e0 : $2 = 000000000000ch00 + and $17, 0xff, $17 #-e0 : $17 = 00000000000000ch + cmpult $18, 9, $4 # .. e1 : + or $2, $17, $17 # e0 : $17 = 000000000000chch + lda $3, -1($31) # .. e1 : + sll $17, 16, $2 #-e0 : $2 = 00000000chch0000 + addq $16, $5, $5 # .. e1 : + or $2, $17, $17 # e1 : $17 = 00000000chchchch + unop # : + sll $17, 32, $2 #-e0 : $2 = chchchch00000000 + or $2, $17, $17 # e1 : $17 = chchchchchchchch + extql $1, $16, $7 # e0 : + beq $4, $first_quad # .. e1 : + + ldq_u $6, -1($5) #-e1 : eight or less bytes to search + extqh $6, $16, $6 # .. e0 : + mov $16, $0 # e0 : + or $7, $6, $1 # .. e1 : $1 = quadword starting at $16 + + # Deal with the case where at most 8 bytes remain to be searched + # in $1. E.g.: + # $18 = 6 + # $1 = ????c6c5c4c3c2c1 +$last_quad: + negq $18, $6 #-e0 : + xor $17, $1, $1 # .. e1 : + srl $3, $6, $6 # e0 : $6 = mask of $18 bits set + cmpbge $31, $1, $2 # .. e1 : + and $2, $6, $2 #-e0 : + beq $2, $not_found # .. e1 : + +$found_it: + # Now, determine which byte matched: + negq $2, $3 # e0 : + and $2, $3, $2 # e1 : + + and $2, 0x0f, $1 #-e0 : + addq $0, 4, $3 # .. e1 : + cmoveq $1, $3, $0 # e0 : + + addq $0, 2, $3 # .. e1 : + and $2, 0x33, $1 #-e0 : + cmoveq $1, $3, $0 # .. e1 : + + and $2, 0x55, $1 # e0 : + addq $0, 1, $3 # .. e1 : + cmoveq $1, $3, $0 #-e0 : + +$done: ret # .. e1 : + + # Deal with the case where $18 > 8 bytes remain to be + # searched. $16 may not be aligned. + .align 4 +$first_quad: + andnot $16, 0x7, $0 #-e1 : + insqh $3, $16, $2 # .. e0 : $2 = 0000ffffffffffff ($16<0:2> ff) + xor $1, $17, $1 # e0 : + or $1, $2, $1 # e1 : $1 = ====ffffffffffff + cmpbge $31, $1, $2 #-e0 : + bne $2, $found_it # .. e1 : + + # At least one byte left to process. + + ldq $1, 8($0) # e0 : + subq $5, 1, $18 # .. e1 : + addq $0, 8, $0 #-e0 : + + # Make $18 point to last quad to be accessed (the + # last quad may or may not be partial). + + andnot $18, 0x7, $18 # .. e1 : + cmpult $0, $18, $2 # e0 : + beq $2, $final # .. e1 : + + # At least two quads remain to be accessed. + + subq $18, $0, $4 #-e0 : $4 <- nr quads to be processed + and $4, 8, $4 # e1 : odd number of quads? + bne $4, $odd_quad_count # e1 : + + # At least three quads remain to be accessed + + mov $1, $4 # e0 : move prefetched value to correct reg + + .align 4 +$unrolled_loop: + ldq $1, 8($0) #-e0 : prefetch $1 + xor $17, $4, $2 # .. e1 : + cmpbge $31, $2, $2 # e0 : + bne $2, $found_it # .. e1 : + + addq $0, 8, $0 #-e0 : +$odd_quad_count: + xor $17, $1, $2 # .. e1 : + ldq $4, 8($0) # e0 : prefetch $4 + cmpbge $31, $2, $2 # .. e1 : + addq $0, 8, $6 #-e0 : + bne $2, $found_it # .. e1 : + + cmpult $6, $18, $6 # e0 : + addq $0, 8, $0 # .. e1 : + bne $6, $unrolled_loop #-e1 : + + mov $4, $1 # e0 : move prefetched value into $1 +$final: subq $5, $0, $18 # .. e1 : $18 <- number of bytes left to do + bne $18, $last_quad # e1 : + +$not_found: + mov $31, $0 #-e0 : + ret # .. e1 : + + .end memchr + EXPORT_SYMBOL(memchr) diff --git a/arch/alpha/lib/memcpy.c b/arch/alpha/lib/memcpy.c new file mode 100644 index 0000000000..cbac3dc6d9 --- /dev/null +++ b/arch/alpha/lib/memcpy.c @@ -0,0 +1,163 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * linux/arch/alpha/lib/memcpy.c + * + * Copyright (C) 1995 Linus Torvalds + */ + +/* + * This is a reasonably optimized memcpy() routine. + */ + +/* + * Note that the C code is written to be optimized into good assembly. However, + * at this point gcc is unable to sanely compile "if (n >= 0)", resulting in a + * explicit compare against 0 (instead of just using the proper "blt reg, xx" or + * "bge reg, xx"). I hope alpha-gcc will be fixed to notice this eventually.. + */ + +#include <linux/types.h> +#include <linux/export.h> + +/* + * This should be done in one go with ldq_u*2/mask/stq_u. Do it + * with a macro so that we can fix it up later.. + */ +#define ALIGN_DEST_TO8_UP(d,s,n) \ + while (d & 7) { \ + if (n <= 0) return; \ + n--; \ + *(char *) d = *(char *) s; \ + d++; s++; \ + } +#define ALIGN_DEST_TO8_DN(d,s,n) \ + while (d & 7) { \ + if (n <= 0) return; \ + n--; \ + d--; s--; \ + *(char *) d = *(char *) s; \ + } + +/* + * This should similarly be done with ldq_u*2/mask/stq. The destination + * is aligned, but we don't fill in a full quad-word + */ +#define DO_REST_UP(d,s,n) \ + while (n > 0) { \ + n--; \ + *(char *) d = *(char *) s; \ + d++; s++; \ + } +#define DO_REST_DN(d,s,n) \ + while (n > 0) { \ + n--; \ + d--; s--; \ + *(char *) d = *(char *) s; \ + } + +/* + * This should be done with ldq/mask/stq. The source and destination are + * aligned, but we don't fill in a full quad-word + */ +#define DO_REST_ALIGNED_UP(d,s,n) DO_REST_UP(d,s,n) +#define DO_REST_ALIGNED_DN(d,s,n) DO_REST_DN(d,s,n) + +/* + * This does unaligned memory copies. We want to avoid storing to + * an unaligned address, as that would do a read-modify-write cycle. + * We also want to avoid double-reading the unaligned reads. + * + * Note the ordering to try to avoid load (and address generation) latencies. + */ +static inline void __memcpy_unaligned_up (unsigned long d, unsigned long s, + long n) +{ + ALIGN_DEST_TO8_UP(d,s,n); + n -= 8; /* to avoid compare against 8 in the loop */ + if (n >= 0) { + unsigned long low_word, high_word; + __asm__("ldq_u %0,%1":"=r" (low_word):"m" (*(unsigned long *) s)); + do { + unsigned long tmp; + __asm__("ldq_u %0,%1":"=r" (high_word):"m" (*(unsigned long *)(s+8))); + n -= 8; + __asm__("extql %1,%2,%0" + :"=r" (low_word) + :"r" (low_word), "r" (s)); + __asm__("extqh %1,%2,%0" + :"=r" (tmp) + :"r" (high_word), "r" (s)); + s += 8; + *(unsigned long *) d = low_word | tmp; + d += 8; + low_word = high_word; + } while (n >= 0); + } + n += 8; + DO_REST_UP(d,s,n); +} + +static inline void __memcpy_unaligned_dn (unsigned long d, unsigned long s, + long n) +{ + /* I don't understand AXP assembler well enough for this. -Tim */ + s += n; + d += n; + while (n--) + * (char *) --d = * (char *) --s; +} + +/* + * Hmm.. Strange. The __asm__ here is there to make gcc use an integer register + * for the load-store. I don't know why, but it would seem that using a floating + * point register for the move seems to slow things down (very small difference, + * though). + * + * Note the ordering to try to avoid load (and address generation) latencies. + */ +static inline void __memcpy_aligned_up (unsigned long d, unsigned long s, + long n) +{ + ALIGN_DEST_TO8_UP(d,s,n); + n -= 8; + while (n >= 0) { + unsigned long tmp; + __asm__("ldq %0,%1":"=r" (tmp):"m" (*(unsigned long *) s)); + n -= 8; + s += 8; + *(unsigned long *) d = tmp; + d += 8; + } + n += 8; + DO_REST_ALIGNED_UP(d,s,n); +} +static inline void __memcpy_aligned_dn (unsigned long d, unsigned long s, + long n) +{ + s += n; + d += n; + ALIGN_DEST_TO8_DN(d,s,n); + n -= 8; + while (n >= 0) { + unsigned long tmp; + s -= 8; + __asm__("ldq %0,%1":"=r" (tmp):"m" (*(unsigned long *) s)); + n -= 8; + d -= 8; + *(unsigned long *) d = tmp; + } + n += 8; + DO_REST_ALIGNED_DN(d,s,n); +} + +void * memcpy(void * dest, const void *src, size_t n) +{ + if (!(((unsigned long) dest ^ (unsigned long) src) & 7)) { + __memcpy_aligned_up ((unsigned long) dest, (unsigned long) src, + n); + return dest; + } + __memcpy_unaligned_up ((unsigned long) dest, (unsigned long) src, n); + return dest; +} +EXPORT_SYMBOL(memcpy); diff --git a/arch/alpha/lib/memmove.S b/arch/alpha/lib/memmove.S new file mode 100644 index 0000000000..3a27689e33 --- /dev/null +++ b/arch/alpha/lib/memmove.S @@ -0,0 +1,183 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/alpha/lib/memmove.S + * + * Barely optimized memmove routine for Alpha EV5. + * + * This is hand-massaged output from the original memcpy.c. We defer to + * memcpy whenever possible; the backwards copy loops are not unrolled. + */ +#include <linux/export.h> + .set noat + .set noreorder + .text + + .align 4 + .globl memmove + .ent memmove +memmove: + ldgp $29, 0($27) + unop + nop + .prologue 1 + + addq $16,$18,$4 + addq $17,$18,$5 + cmpule $4,$17,$1 /* dest + n <= src */ + cmpule $5,$16,$2 /* dest >= src + n */ + + bis $1,$2,$1 + mov $16,$0 + xor $16,$17,$2 + bne $1,memcpy !samegp + + and $2,7,$2 /* Test for src/dest co-alignment. */ + and $16,7,$1 + cmpule $16,$17,$3 + bne $3,$memmove_up /* dest < src */ + + and $4,7,$1 + bne $2,$misaligned_dn + unop + beq $1,$skip_aligned_byte_loop_head_dn + +$aligned_byte_loop_head_dn: + lda $4,-1($4) + lda $5,-1($5) + unop + ble $18,$egress + + ldq_u $3,0($5) + ldq_u $2,0($4) + lda $18,-1($18) + extbl $3,$5,$1 + + insbl $1,$4,$1 + mskbl $2,$4,$2 + bis $1,$2,$1 + and $4,7,$6 + + stq_u $1,0($4) + bne $6,$aligned_byte_loop_head_dn + +$skip_aligned_byte_loop_head_dn: + lda $18,-8($18) + blt $18,$skip_aligned_word_loop_dn + +$aligned_word_loop_dn: + ldq $1,-8($5) + nop + lda $5,-8($5) + lda $18,-8($18) + + stq $1,-8($4) + nop + lda $4,-8($4) + bge $18,$aligned_word_loop_dn + +$skip_aligned_word_loop_dn: + lda $18,8($18) + bgt $18,$byte_loop_tail_dn + unop + ret $31,($26),1 + + .align 4 +$misaligned_dn: + nop + fnop + unop + beq $18,$egress + +$byte_loop_tail_dn: + ldq_u $3,-1($5) + ldq_u $2,-1($4) + lda $5,-1($5) + lda $4,-1($4) + + lda $18,-1($18) + extbl $3,$5,$1 + insbl $1,$4,$1 + mskbl $2,$4,$2 + + bis $1,$2,$1 + stq_u $1,0($4) + bgt $18,$byte_loop_tail_dn + br $egress + +$memmove_up: + mov $16,$4 + mov $17,$5 + bne $2,$misaligned_up + beq $1,$skip_aligned_byte_loop_head_up + +$aligned_byte_loop_head_up: + unop + ble $18,$egress + ldq_u $3,0($5) + ldq_u $2,0($4) + + lda $18,-1($18) + extbl $3,$5,$1 + insbl $1,$4,$1 + mskbl $2,$4,$2 + + bis $1,$2,$1 + lda $5,1($5) + stq_u $1,0($4) + lda $4,1($4) + + and $4,7,$6 + bne $6,$aligned_byte_loop_head_up + +$skip_aligned_byte_loop_head_up: + lda $18,-8($18) + blt $18,$skip_aligned_word_loop_up + +$aligned_word_loop_up: + ldq $1,0($5) + nop + lda $5,8($5) + lda $18,-8($18) + + stq $1,0($4) + nop + lda $4,8($4) + bge $18,$aligned_word_loop_up + +$skip_aligned_word_loop_up: + lda $18,8($18) + bgt $18,$byte_loop_tail_up + unop + ret $31,($26),1 + + .align 4 +$misaligned_up: + nop + fnop + unop + beq $18,$egress + +$byte_loop_tail_up: + ldq_u $3,0($5) + ldq_u $2,0($4) + lda $18,-1($18) + extbl $3,$5,$1 + + insbl $1,$4,$1 + mskbl $2,$4,$2 + bis $1,$2,$1 + stq_u $1,0($4) + + lda $5,1($5) + lda $4,1($4) + nop + bgt $18,$byte_loop_tail_up + +$egress: + ret $31,($26),1 + nop + nop + nop + + .end memmove + EXPORT_SYMBOL(memmove) diff --git a/arch/alpha/lib/memset.S b/arch/alpha/lib/memset.S new file mode 100644 index 0000000000..9075d69183 --- /dev/null +++ b/arch/alpha/lib/memset.S @@ -0,0 +1,133 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * linux/arch/alpha/lib/memset.S + * + * This is an efficient (and small) implementation of the C library "memset()" + * function for the alpha. + * + * (C) Copyright 1996 Linus Torvalds + * + * This routine is "moral-ware": you are free to use it any way you wish, and + * the only obligation I put on you is a moral one: if you make any improvements + * to the routine, please send me your improvements for me to use similarly. + * + * The scheduling comments are according to the EV5 documentation (and done by + * hand, so they might well be incorrect, please do tell me about it..) + */ +#include <linux/export.h> + .set noat + .set noreorder +.text + .globl memset + .globl __memset + .globl ___memset + .globl __memset16 + .globl __constant_c_memset + + .ent ___memset +.align 5 +___memset: + .frame $30,0,$26,0 + .prologue 0 + + and $17,255,$1 /* E1 */ + insbl $17,1,$17 /* .. E0 */ + bis $17,$1,$17 /* E0 (p-c latency, next cycle) */ + sll $17,16,$1 /* E1 (p-c latency, next cycle) */ + + bis $17,$1,$17 /* E0 (p-c latency, next cycle) */ + sll $17,32,$1 /* E1 (p-c latency, next cycle) */ + bis $17,$1,$17 /* E0 (p-c latency, next cycle) */ + ldq_u $31,0($30) /* .. E1 */ + +.align 5 +__constant_c_memset: + addq $18,$16,$6 /* E0 */ + bis $16,$16,$0 /* .. E1 */ + xor $16,$6,$1 /* E0 */ + ble $18,end /* .. E1 */ + + bic $1,7,$1 /* E0 */ + beq $1,within_one_quad /* .. E1 (note EV5 zero-latency forwarding) */ + and $16,7,$3 /* E0 */ + beq $3,aligned /* .. E1 (note EV5 zero-latency forwarding) */ + + ldq_u $4,0($16) /* E0 */ + bis $16,$16,$5 /* .. E1 */ + insql $17,$16,$2 /* E0 */ + subq $3,8,$3 /* .. E1 */ + + addq $18,$3,$18 /* E0 $18 is new count ($3 is negative) */ + mskql $4,$16,$4 /* .. E1 (and possible load stall) */ + subq $16,$3,$16 /* E0 $16 is new aligned destination */ + bis $2,$4,$1 /* .. E1 */ + + bis $31,$31,$31 /* E0 */ + ldq_u $31,0($30) /* .. E1 */ + stq_u $1,0($5) /* E0 */ + bis $31,$31,$31 /* .. E1 */ + +.align 4 +aligned: + sra $18,3,$3 /* E0 */ + and $18,7,$18 /* .. E1 */ + bis $16,$16,$5 /* E0 */ + beq $3,no_quad /* .. E1 */ + +.align 3 +loop: + stq $17,0($5) /* E0 */ + subq $3,1,$3 /* .. E1 */ + addq $5,8,$5 /* E0 */ + bne $3,loop /* .. E1 */ + +no_quad: + bis $31,$31,$31 /* E0 */ + beq $18,end /* .. E1 */ + ldq $7,0($5) /* E0 */ + mskqh $7,$6,$2 /* .. E1 (and load stall) */ + + insqh $17,$6,$4 /* E0 */ + bis $2,$4,$1 /* .. E1 */ + stq $1,0($5) /* E0 */ + ret $31,($26),1 /* .. E1 */ + +.align 3 +within_one_quad: + ldq_u $1,0($16) /* E0 */ + insql $17,$16,$2 /* E1 */ + mskql $1,$16,$4 /* E0 (after load stall) */ + bis $2,$4,$2 /* E0 */ + + mskql $2,$6,$4 /* E0 */ + mskqh $1,$6,$2 /* .. E1 */ + bis $2,$4,$1 /* E0 */ + stq_u $1,0($16) /* E0 */ + +end: + ret $31,($26),1 /* E1 */ + .end ___memset +EXPORT_SYMBOL(___memset) +EXPORT_SYMBOL(__constant_c_memset) + + .align 5 + .ent __memset16 +__memset16: + .prologue 0 + + inswl $17,0,$1 /* E0 */ + inswl $17,2,$2 /* E0 */ + inswl $17,4,$3 /* E0 */ + or $1,$2,$1 /* .. E1 */ + inswl $17,6,$4 /* E0 */ + or $1,$3,$1 /* .. E1 */ + or $1,$4,$17 /* E0 */ + br __constant_c_memset /* .. E1 */ + + .end __memset16 +EXPORT_SYMBOL(__memset16) + +memset = ___memset +__memset = ___memset + EXPORT_SYMBOL(memset) + EXPORT_SYMBOL(__memset) diff --git a/arch/alpha/lib/srm_printk.c b/arch/alpha/lib/srm_printk.c new file mode 100644 index 0000000000..6276eed762 --- /dev/null +++ b/arch/alpha/lib/srm_printk.c @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * arch/alpha/lib/srm_printk.c + */ + +#include <linux/kernel.h> +#include <asm/console.h> + +long +srm_printk(const char *fmt, ...) +{ + static char buf[1024]; + va_list args; + long len, num_lf; + char *src, *dst; + + va_start(args, fmt); + len = vsprintf(buf, fmt, args); + va_end(args); + + /* count number of linefeeds in string: */ + + num_lf = 0; + for (src = buf; *src; ++src) { + if (*src == '\n') { + ++num_lf; + } + } + + if (num_lf) { + /* expand each linefeed into carriage-return/linefeed: */ + for (dst = src + num_lf; src >= buf; ) { + if (*src == '\n') { + *dst-- = '\r'; + } + *dst-- = *src--; + } + } + + srm_puts(buf, num_lf+len); + return len; +} diff --git a/arch/alpha/lib/srm_puts.c b/arch/alpha/lib/srm_puts.c new file mode 100644 index 0000000000..df7991f6fc --- /dev/null +++ b/arch/alpha/lib/srm_puts.c @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * arch/alpha/lib/srm_puts.c + */ + +#include <linux/string.h> +#include <asm/console.h> + +long +srm_puts(const char *str, long len) +{ + long remaining, written; + + if (!callback_init_done) + return len; + + for (remaining = len; remaining > 0; remaining -= written) + { + written = callback_puts(0, str, remaining); + written &= 0xffffffff; + str += written; + } + return len; +} diff --git a/arch/alpha/lib/stacktrace.c b/arch/alpha/lib/stacktrace.c new file mode 100644 index 0000000000..2b1176dd51 --- /dev/null +++ b/arch/alpha/lib/stacktrace.c @@ -0,0 +1,103 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/kernel.h> + +typedef unsigned int instr; + +#define MAJOR_OP 0xfc000000 +#define LDA_OP 0x20000000 +#define STQ_OP 0xb4000000 +#define BR_OP 0xc0000000 + +#define STK_ALLOC_1 0x23de8000 /* lda $30,-X($30) */ +#define STK_ALLOC_1M 0xffff8000 +#define STK_ALLOC_2 0x43c0153e /* subq $30,X,$30 */ +#define STK_ALLOC_2M 0xffe01fff + +#define MEM_REG 0x03e00000 +#define MEM_BASE 0x001f0000 +#define MEM_OFF 0x0000ffff +#define MEM_OFF_SIGN 0x00008000 +#define BASE_SP 0x001e0000 + +#define STK_ALLOC_MATCH(INSTR) \ + (((INSTR) & STK_ALLOC_1M) == STK_ALLOC_1 \ + || ((INSTR) & STK_ALLOC_2M) == STK_ALLOC_2) +#define STK_PUSH_MATCH(INSTR) \ + (((INSTR) & (MAJOR_OP | MEM_BASE | MEM_OFF_SIGN)) == (STQ_OP | BASE_SP)) +#define MEM_OP_OFFSET(INSTR) \ + (((long)((INSTR) & MEM_OFF) << 48) >> 48) +#define MEM_OP_REG(INSTR) \ + (((INSTR) & MEM_REG) >> 22) + +/* Branches, jumps, PAL calls, and illegal opcodes end a basic block. */ +#define BB_END(INSTR) \ + (((instr)(INSTR) >= BR_OP) | ((instr)(INSTR) < LDA_OP) | \ + ((((instr)(INSTR) ^ 0x60000000) < 0x20000000) & \ + (((instr)(INSTR) & 0x0c000000) != 0))) + +#define IS_KERNEL_TEXT(PC) ((unsigned long)(PC) > START_ADDR) + +static char reg_name[][4] = { + "v0 ", "t0 ", "t1 ", "t2 ", "t3 ", "t4 ", "t5 ", "t6 ", "t7 ", + "s0 ", "s1 ", "s2 ", "s3 ", "s4 ", "s5 ", "s6 ", "a0 ", "a1 ", + "a2 ", "a3 ", "a4 ", "a5 ", "t8 ", "t9 ", "t10", "t11", "ra ", + "pv ", "at ", "gp ", "sp ", "0" +}; + + +static instr * +display_stored_regs(instr * pro_pc, unsigned char * sp) +{ + instr * ret_pc = 0; + int reg; + unsigned long value; + + printk("Prologue [<%p>], Frame %p:\n", pro_pc, sp); + while (!BB_END(*pro_pc)) + if (STK_PUSH_MATCH(*pro_pc)) { + reg = (*pro_pc & MEM_REG) >> 21; + value = *(unsigned long *)(sp + (*pro_pc & MEM_OFF)); + if (reg == 26) + ret_pc = (instr *)value; + printk("\t\t%s / 0x%016lx\n", reg_name[reg], value); + } + return ret_pc; +} + +static instr * +seek_prologue(instr * pc) +{ + while (!STK_ALLOC_MATCH(*pc)) + --pc; + while (!BB_END(*(pc - 1))) + --pc; + return pc; +} + +static long +stack_increment(instr * prologue_pc) +{ + while (!STK_ALLOC_MATCH(*prologue_pc)) + ++prologue_pc; + + /* Count the bytes allocated. */ + if ((*prologue_pc & STK_ALLOC_1M) == STK_ALLOC_1M) + return -(((long)(*prologue_pc) << 48) >> 48); + else + return (*prologue_pc >> 13) & 0xff; +} + +void +stacktrace(void) +{ + instr * ret_pc; + instr * prologue = (instr *)stacktrace; + unsigned char *sp = (unsigned char *)current_stack_pointer; + + printk("\tstack trace:\n"); + do { + ret_pc = display_stored_regs(prologue, sp); + sp += stack_increment(prologue); + prologue = seek_prologue(ret_pc); + } while (IS_KERNEL_TEXT(ret_pc)); +} diff --git a/arch/alpha/lib/strcat.S b/arch/alpha/lib/strcat.S new file mode 100644 index 0000000000..62b90ebbcf --- /dev/null +++ b/arch/alpha/lib/strcat.S @@ -0,0 +1,55 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/alpha/lib/strcat.S + * Contributed by Richard Henderson (rth@tamu.edu) + * + * Append a null-terminated string from SRC to DST. + */ +#include <linux/export.h> + + .text + + .align 3 + .globl strcat + .ent strcat +strcat: + .frame $30, 0, $26 + .prologue 0 + + mov $16, $0 # set up return value + + /* Find the end of the string. */ + + ldq_u $1, 0($16) # load first quadword (a0 may be misaligned) + lda $2, -1 + insqh $2, $16, $2 + andnot $16, 7, $16 + or $2, $1, $1 + cmpbge $31, $1, $2 # bits set iff byte == 0 + bne $2, $found + +$loop: ldq $1, 8($16) + addq $16, 8, $16 + cmpbge $31, $1, $2 + beq $2, $loop + +$found: negq $2, $3 # clear all but least set bit + and $2, $3, $2 + + and $2, 0xf0, $3 # binary search for that set bit + and $2, 0xcc, $4 + and $2, 0xaa, $5 + cmovne $3, 4, $3 + cmovne $4, 2, $4 + cmovne $5, 1, $5 + addq $3, $4, $3 + addq $16, $5, $16 + addq $16, $3, $16 + + /* Now do the append. */ + + mov $26, $23 + br __stxcpy + + .end strcat +EXPORT_SYMBOL(strcat); diff --git a/arch/alpha/lib/strchr.S b/arch/alpha/lib/strchr.S new file mode 100644 index 0000000000..68c54ff50d --- /dev/null +++ b/arch/alpha/lib/strchr.S @@ -0,0 +1,72 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/alpha/lib/strchr.S + * Contributed by Richard Henderson (rth@tamu.edu) + * + * Return the address of a given character within a null-terminated + * string, or null if it is not found. + */ +#include <linux/export.h> +#include <asm/regdef.h> + + .set noreorder + .set noat + + .align 3 + .globl strchr + .ent strchr +strchr: + .frame sp, 0, ra + .prologue 0 + + zapnot a1, 1, a1 # e0 : zero extend the search character + ldq_u t0, 0(a0) # .. e1 : load first quadword + sll a1, 8, t5 # e0 : replicate the search character + andnot a0, 7, v0 # .. e1 : align our loop pointer + or t5, a1, a1 # e0 : + lda t4, -1 # .. e1 : build garbage mask + sll a1, 16, t5 # e0 : + cmpbge zero, t0, t2 # .. e1 : bits set iff byte == zero + mskqh t4, a0, t4 # e0 : + or t5, a1, a1 # .. e1 : + sll a1, 32, t5 # e0 : + cmpbge zero, t4, t4 # .. e1 : bits set iff byte is garbage + or t5, a1, a1 # e0 : + xor t0, a1, t1 # .. e1 : make bytes == c zero + cmpbge zero, t1, t3 # e0 : bits set iff byte == c + or t2, t3, t0 # e1 : bits set iff char match or zero match + andnot t0, t4, t0 # e0 : clear garbage bits + bne t0, $found # .. e1 (zdb) + +$loop: ldq t0, 8(v0) # e0 : + addq v0, 8, v0 # .. e1 : + nop # e0 : + xor t0, a1, t1 # .. e1 (ev5 data stall) + cmpbge zero, t0, t2 # e0 : bits set iff byte == 0 + cmpbge zero, t1, t3 # .. e1 : bits set iff byte == c + or t2, t3, t0 # e0 : + beq t0, $loop # .. e1 (zdb) + +$found: negq t0, t1 # e0 : clear all but least set bit + and t0, t1, t0 # e1 (stall) + + and t0, t3, t1 # e0 : bit set iff byte was the char + beq t1, $retnull # .. e1 (zdb) + + and t0, 0xf0, t2 # e0 : binary search for that set bit + and t0, 0xcc, t3 # .. e1 : + and t0, 0xaa, t4 # e0 : + cmovne t2, 4, t2 # .. e1 : + cmovne t3, 2, t3 # e0 : + cmovne t4, 1, t4 # .. e1 : + addq t2, t3, t2 # e0 : + addq v0, t4, v0 # .. e1 : + addq v0, t2, v0 # e0 : + ret # .. e1 : + +$retnull: + mov zero, v0 # e0 : + ret # .. e1 : + + .end strchr + EXPORT_SYMBOL(strchr) diff --git a/arch/alpha/lib/strcpy.S b/arch/alpha/lib/strcpy.S new file mode 100644 index 0000000000..d8773ba775 --- /dev/null +++ b/arch/alpha/lib/strcpy.S @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/alpha/lib/strcpy.S + * Contributed by Richard Henderson (rth@tamu.edu) + * + * Copy a null-terminated string from SRC to DST. Return a pointer + * to the null-terminator in the source. + */ +#include <linux/export.h> + .text + + .align 3 + .globl strcpy + .ent strcpy +strcpy: + .frame $30, 0, $26 + .prologue 0 + + mov $16, $0 # set up return value + mov $26, $23 # set up return address + unop + br __stxcpy # do the copy + + .end strcpy + EXPORT_SYMBOL(strcpy) diff --git a/arch/alpha/lib/strlen.S b/arch/alpha/lib/strlen.S new file mode 100644 index 0000000000..4fc6a6ff24 --- /dev/null +++ b/arch/alpha/lib/strlen.S @@ -0,0 +1,59 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * strlen.S (c) 1995 David Mosberger (davidm@cs.arizona.edu) + * + * Finds length of a 0-terminated string. Optimized for the + * Alpha architecture: + * + * - memory accessed as aligned quadwords only + * - uses bcmpge to compare 8 bytes in parallel + * - does binary search to find 0 byte in last + * quadword (HAKMEM needed 12 instructions to + * do this instead of the 9 instructions that + * binary search needs). + */ +#include <linux/export.h> + .set noreorder + .set noat + + .align 3 + + .globl strlen + .ent strlen + +strlen: + ldq_u $1, 0($16) # load first quadword ($16 may be misaligned) + lda $2, -1($31) + insqh $2, $16, $2 + andnot $16, 7, $0 + or $2, $1, $1 + cmpbge $31, $1, $2 # $2 <- bitmask: bit i == 1 <==> i-th byte == 0 + bne $2, found + +loop: ldq $1, 8($0) + addq $0, 8, $0 # addr += 8 + nop # helps dual issue last two insns + cmpbge $31, $1, $2 + beq $2, loop + +found: blbs $2, done # make aligned case fast + negq $2, $3 + and $2, $3, $2 + + and $2, 0x0f, $1 + addq $0, 4, $3 + cmoveq $1, $3, $0 + + and $2, 0x33, $1 + addq $0, 2, $3 + cmoveq $1, $3, $0 + + and $2, 0x55, $1 + addq $0, 1, $3 + cmoveq $1, $3, $0 + +done: subq $0, $16, $0 + ret $31, ($26) + + .end strlen + EXPORT_SYMBOL(strlen) diff --git a/arch/alpha/lib/strncat.S b/arch/alpha/lib/strncat.S new file mode 100644 index 0000000000..a913a7c84a --- /dev/null +++ b/arch/alpha/lib/strncat.S @@ -0,0 +1,86 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/alpha/lib/strncat.S + * Contributed by Richard Henderson (rth@tamu.edu) + * + * Append no more than COUNT characters from the null-terminated string SRC + * to the null-terminated string DST. Always null-terminate the new DST. + * + * This differs slightly from the semantics in libc in that we never write + * past count, whereas libc may write to count+1. This follows the generic + * implementation in lib/string.c and is, IMHO, more sensible. + */ +#include <linux/export.h> + .text + + .align 3 + .globl strncat + .ent strncat +strncat: + .frame $30, 0, $26 + .prologue 0 + + mov $16, $0 # set up return value + beq $18, $zerocount + + /* Find the end of the string. */ + + ldq_u $1, 0($16) # load first quadword ($16 may be misaligned) + lda $2, -1($31) + insqh $2, $16, $2 + andnot $16, 7, $16 + or $2, $1, $1 + cmpbge $31, $1, $2 # bits set iff byte == 0 + bne $2, $found + +$loop: ldq $1, 8($16) + addq $16, 8, $16 + cmpbge $31, $1, $2 + beq $2, $loop + +$found: negq $2, $3 # clear all but least set bit + and $2, $3, $2 + + and $2, 0xf0, $3 # binary search for that set bit + and $2, 0xcc, $4 + and $2, 0xaa, $5 + cmovne $3, 4, $3 + cmovne $4, 2, $4 + cmovne $5, 1, $5 + addq $3, $4, $3 + addq $16, $5, $16 + addq $16, $3, $16 + + /* Now do the append. */ + + bsr $23, __stxncpy + + /* Worry about the null termination. */ + + zapnot $1, $27, $2 # was last byte a null? + bne $2, 0f + ret + +0: cmplt $27, $24, $2 # did we fill the buffer completely? + or $2, $18, $2 + bne $2, 2f + + and $24, 0x80, $2 # no zero next byte + bne $2, 1f + + /* Here there are bytes left in the current word. Clear one. */ + addq $24, $24, $24 # end-of-count bit <<= 1 +2: zap $1, $24, $1 + stq_u $1, 0($16) + ret + +1: /* Here we must read the next DST word and clear the first byte. */ + ldq_u $1, 8($16) + zap $1, 1, $1 + stq_u $1, 8($16) + +$zerocount: + ret + + .end strncat + EXPORT_SYMBOL(strncat) diff --git a/arch/alpha/lib/strncpy.S b/arch/alpha/lib/strncpy.S new file mode 100644 index 0000000000..cb90cf022d --- /dev/null +++ b/arch/alpha/lib/strncpy.S @@ -0,0 +1,83 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/alpha/lib/strncpy.S + * Contributed by Richard Henderson (rth@tamu.edu) + * + * Copy no more than COUNT bytes of the null-terminated string from + * SRC to DST. If SRC does not cover all of COUNT, the balance is + * zeroed. + * + * Or, rather, if the kernel cared about that weird ANSI quirk. This + * version has cropped that bit o' nastiness as well as assuming that + * __stxncpy is in range of a branch. + */ +#include <linux/export.h> + .set noat + .set noreorder + + .text + + .align 4 + .globl strncpy + .ent strncpy +strncpy: + .frame $30, 0, $26 + .prologue 0 + + mov $16, $0 # set return value now + beq $18, $zerolen + unop + bsr $23, __stxncpy # do the work of the copy + + unop + bne $18, $multiword # do we have full words left? + subq $24, 1, $3 # nope + subq $27, 1, $4 + + or $3, $24, $3 # clear the bits between the last + or $4, $27, $4 # written byte and the last byte in COUNT + andnot $3, $4, $4 + zap $1, $4, $1 + + stq_u $1, 0($16) + ret + + .align 4 +$multiword: + subq $27, 1, $2 # clear the final bits in the prev word + or $2, $27, $2 + zapnot $1, $2, $1 + subq $18, 1, $18 + + stq_u $1, 0($16) + addq $16, 8, $16 + unop + beq $18, 1f + + nop + unop + nop + blbc $18, 0f + + stq_u $31, 0($16) # zero one word + subq $18, 1, $18 + addq $16, 8, $16 + beq $18, 1f + +0: stq_u $31, 0($16) # zero two words + subq $18, 2, $18 + stq_u $31, 8($16) + addq $16, 16, $16 + bne $18, 0b + +1: ldq_u $1, 0($16) # clear the leading bits in the final word + subq $24, 1, $2 + or $2, $24, $2 + + zap $1, $2, $1 + stq_u $1, 0($16) +$zerolen: + ret + + .end strncpy + EXPORT_SYMBOL(strncpy) diff --git a/arch/alpha/lib/strrchr.S b/arch/alpha/lib/strrchr.S new file mode 100644 index 0000000000..dd8e073b6c --- /dev/null +++ b/arch/alpha/lib/strrchr.S @@ -0,0 +1,89 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/alpha/lib/strrchr.S + * Contributed by Richard Henderson (rth@tamu.edu) + * + * Return the address of the last occurrence of a given character + * within a null-terminated string, or null if it is not found. + */ +#include <linux/export.h> +#include <asm/regdef.h> + + .set noreorder + .set noat + + .align 3 + .ent strrchr + .globl strrchr +strrchr: + .frame sp, 0, ra + .prologue 0 + + zapnot a1, 1, a1 # e0 : zero extend our test character + mov zero, t6 # .. e1 : t6 is last match aligned addr + sll a1, 8, t5 # e0 : replicate our test character + mov zero, t8 # .. e1 : t8 is last match byte compare mask + or t5, a1, a1 # e0 : + ldq_u t0, 0(a0) # .. e1 : load first quadword + sll a1, 16, t5 # e0 : + andnot a0, 7, v0 # .. e1 : align source addr + or t5, a1, a1 # e0 : + lda t4, -1 # .. e1 : build garbage mask + sll a1, 32, t5 # e0 : + cmpbge zero, t0, t1 # .. e1 : bits set iff byte == zero + mskqh t4, a0, t4 # e0 : + or t5, a1, a1 # .. e1 : character replication complete + xor t0, a1, t2 # e0 : make bytes == c zero + cmpbge zero, t4, t4 # .. e1 : bits set iff byte is garbage + cmpbge zero, t2, t3 # e0 : bits set iff byte == c + andnot t1, t4, t1 # .. e1 : clear garbage from null test + andnot t3, t4, t3 # e0 : clear garbage from char test + bne t1, $eos # .. e1 : did we already hit the terminator? + + /* Character search main loop */ +$loop: + ldq t0, 8(v0) # e0 : load next quadword + cmovne t3, v0, t6 # .. e1 : save previous comparisons match + cmovne t3, t3, t8 # e0 : + addq v0, 8, v0 # .. e1 : + xor t0, a1, t2 # e0 : + cmpbge zero, t0, t1 # .. e1 : bits set iff byte == zero + cmpbge zero, t2, t3 # e0 : bits set iff byte == c + beq t1, $loop # .. e1 : if we havnt seen a null, loop + + /* Mask out character matches after terminator */ +$eos: + negq t1, t4 # e0 : isolate first null byte match + and t1, t4, t4 # e1 : + subq t4, 1, t5 # e0 : build a mask of the bytes up to... + or t4, t5, t4 # e1 : ... and including the null + + and t3, t4, t3 # e0 : mask out char matches after null + cmovne t3, t3, t8 # .. e1 : save it, if match found + cmovne t3, v0, t6 # e0 : + + /* Locate the address of the last matched character */ + + /* Retain the early exit for the ev4 -- the ev5 mispredict penalty + is 5 cycles -- the same as just falling through. */ + beq t8, $retnull # .. e1 : + + and t8, 0xf0, t2 # e0 : binary search for the high bit set + cmovne t2, t2, t8 # .. e1 (zdb) + cmovne t2, 4, t2 # e0 : + and t8, 0xcc, t1 # .. e1 : + cmovne t1, t1, t8 # e0 : + cmovne t1, 2, t1 # .. e1 : + and t8, 0xaa, t0 # e0 : + cmovne t0, 1, t0 # .. e1 (zdb) + addq t2, t1, t1 # e0 : + addq t6, t0, v0 # .. e1 : add our aligned base ptr to the mix + addq v0, t1, v0 # e0 : + ret # .. e1 : + +$retnull: + mov zero, v0 # e0 : + ret # .. e1 : + + .end strrchr + EXPORT_SYMBOL(strrchr) diff --git a/arch/alpha/lib/stxcpy.S b/arch/alpha/lib/stxcpy.S new file mode 100644 index 0000000000..58723b0a36 --- /dev/null +++ b/arch/alpha/lib/stxcpy.S @@ -0,0 +1,290 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/alpha/lib/stxcpy.S + * Contributed by Richard Henderson (rth@tamu.edu) + * + * Copy a null-terminated string from SRC to DST. + * + * This is an internal routine used by strcpy, stpcpy, and strcat. + * As such, it uses special linkage conventions to make implementation + * of these public functions more efficient. + * + * On input: + * t9 = return address + * a0 = DST + * a1 = SRC + * + * On output: + * t12 = bitmask (with one bit set) indicating the last byte written + * a0 = unaligned address of the last *word* written + * + * Furthermore, v0, a3-a5, t11, and t12 are untouched. + */ + +#include <asm/regdef.h> + + .set noat + .set noreorder + + .text + +/* There is a problem with either gdb (as of 4.16) or gas (as of 2.7) that + doesn't like putting the entry point for a procedure somewhere in the + middle of the procedure descriptor. Work around this by putting the + aligned copy in its own procedure descriptor */ + + .ent stxcpy_aligned + .align 3 +stxcpy_aligned: + .frame sp, 0, t9 + .prologue 0 + + /* On entry to this basic block: + t0 == the first destination word for masking back in + t1 == the first source word. */ + + /* Create the 1st output word and detect 0's in the 1st input word. */ + lda t2, -1 # e1 : build a mask against false zero + mskqh t2, a1, t2 # e0 : detection in the src word + mskqh t1, a1, t3 # e0 : + ornot t1, t2, t2 # .. e1 : + mskql t0, a1, t0 # e0 : assemble the first output word + cmpbge zero, t2, t8 # .. e1 : bits set iff null found + or t0, t3, t1 # e0 : + bne t8, $a_eos # .. e1 : + + /* On entry to this basic block: + t0 == the first destination word for masking back in + t1 == a source word not containing a null. */ + +$a_loop: + stq_u t1, 0(a0) # e0 : + addq a0, 8, a0 # .. e1 : + ldq_u t1, 0(a1) # e0 : + addq a1, 8, a1 # .. e1 : + cmpbge zero, t1, t8 # e0 (stall) + beq t8, $a_loop # .. e1 (zdb) + + /* Take care of the final (partial) word store. + On entry to this basic block we have: + t1 == the source word containing the null + t8 == the cmpbge mask that found it. */ +$a_eos: + negq t8, t6 # e0 : find low bit set + and t8, t6, t12 # e1 (stall) + + /* For the sake of the cache, don't read a destination word + if we're not going to need it. */ + and t12, 0x80, t6 # e0 : + bne t6, 1f # .. e1 (zdb) + + /* We're doing a partial word store and so need to combine + our source and original destination words. */ + ldq_u t0, 0(a0) # e0 : + subq t12, 1, t6 # .. e1 : + zapnot t1, t6, t1 # e0 : clear src bytes >= null + or t12, t6, t8 # .. e1 : + zap t0, t8, t0 # e0 : clear dst bytes <= null + or t0, t1, t1 # e1 : + +1: stq_u t1, 0(a0) # e0 : + ret (t9) # .. e1 : + + .end stxcpy_aligned + + .align 3 + .ent __stxcpy + .globl __stxcpy +__stxcpy: + .frame sp, 0, t9 + .prologue 0 + + /* Are source and destination co-aligned? */ + xor a0, a1, t0 # e0 : + unop # : + and t0, 7, t0 # e0 : + bne t0, $unaligned # .. e1 : + + /* We are co-aligned; take care of a partial first word. */ + ldq_u t1, 0(a1) # e0 : load first src word + and a0, 7, t0 # .. e1 : take care not to load a word ... + addq a1, 8, a1 # e0 : + beq t0, stxcpy_aligned # .. e1 : ... if we wont need it + ldq_u t0, 0(a0) # e0 : + br stxcpy_aligned # .. e1 : + + +/* The source and destination are not co-aligned. Align the destination + and cope. We have to be very careful about not reading too much and + causing a SEGV. */ + + .align 3 +$u_head: + /* We know just enough now to be able to assemble the first + full source word. We can still find a zero at the end of it + that prevents us from outputting the whole thing. + + On entry to this basic block: + t0 == the first dest word, for masking back in, if needed else 0 + t1 == the low bits of the first source word + t6 == bytemask that is -1 in dest word bytes */ + + ldq_u t2, 8(a1) # e0 : + addq a1, 8, a1 # .. e1 : + + extql t1, a1, t1 # e0 : + extqh t2, a1, t4 # e0 : + mskql t0, a0, t0 # e0 : + or t1, t4, t1 # .. e1 : + mskqh t1, a0, t1 # e0 : + or t0, t1, t1 # e1 : + + or t1, t6, t6 # e0 : + cmpbge zero, t6, t8 # .. e1 : + lda t6, -1 # e0 : for masking just below + bne t8, $u_final # .. e1 : + + mskql t6, a1, t6 # e0 : mask out the bits we have + or t6, t2, t2 # e1 : already extracted before + cmpbge zero, t2, t8 # e0 : testing eos + bne t8, $u_late_head_exit # .. e1 (zdb) + + /* Finally, we've got all the stupid leading edge cases taken care + of and we can set up to enter the main loop. */ + + stq_u t1, 0(a0) # e0 : store first output word + addq a0, 8, a0 # .. e1 : + extql t2, a1, t0 # e0 : position ho-bits of lo word + ldq_u t2, 8(a1) # .. e1 : read next high-order source word + addq a1, 8, a1 # e0 : + cmpbge zero, t2, t8 # .. e1 : + nop # e0 : + bne t8, $u_eos # .. e1 : + + /* Unaligned copy main loop. In order to avoid reading too much, + the loop is structured to detect zeros in aligned source words. + This has, unfortunately, effectively pulled half of a loop + iteration out into the head and half into the tail, but it does + prevent nastiness from accumulating in the very thing we want + to run as fast as possible. + + On entry to this basic block: + t0 == the shifted high-order bits from the previous source word + t2 == the unshifted current source word + + We further know that t2 does not contain a null terminator. */ + + .align 3 +$u_loop: + extqh t2, a1, t1 # e0 : extract high bits for current word + addq a1, 8, a1 # .. e1 : + extql t2, a1, t3 # e0 : extract low bits for next time + addq a0, 8, a0 # .. e1 : + or t0, t1, t1 # e0 : current dst word now complete + ldq_u t2, 0(a1) # .. e1 : load high word for next time + stq_u t1, -8(a0) # e0 : save the current word + mov t3, t0 # .. e1 : + cmpbge zero, t2, t8 # e0 : test new word for eos + beq t8, $u_loop # .. e1 : + + /* We've found a zero somewhere in the source word we just read. + If it resides in the lower half, we have one (probably partial) + word to write out, and if it resides in the upper half, we + have one full and one partial word left to write out. + + On entry to this basic block: + t0 == the shifted high-order bits from the previous source word + t2 == the unshifted current source word. */ +$u_eos: + extqh t2, a1, t1 # e0 : + or t0, t1, t1 # e1 : first (partial) source word complete + + cmpbge zero, t1, t8 # e0 : is the null in this first bit? + bne t8, $u_final # .. e1 (zdb) + +$u_late_head_exit: + stq_u t1, 0(a0) # e0 : the null was in the high-order bits + addq a0, 8, a0 # .. e1 : + extql t2, a1, t1 # e0 : + cmpbge zero, t1, t8 # .. e1 : + + /* Take care of a final (probably partial) result word. + On entry to this basic block: + t1 == assembled source word + t8 == cmpbge mask that found the null. */ +$u_final: + negq t8, t6 # e0 : isolate low bit set + and t6, t8, t12 # e1 : + + and t12, 0x80, t6 # e0 : avoid dest word load if we can + bne t6, 1f # .. e1 (zdb) + + ldq_u t0, 0(a0) # e0 : + subq t12, 1, t6 # .. e1 : + or t6, t12, t8 # e0 : + zapnot t1, t6, t1 # .. e1 : kill source bytes >= null + zap t0, t8, t0 # e0 : kill dest bytes <= null + or t0, t1, t1 # e1 : + +1: stq_u t1, 0(a0) # e0 : + ret (t9) # .. e1 : + + /* Unaligned copy entry point. */ + .align 3 +$unaligned: + + ldq_u t1, 0(a1) # e0 : load first source word + + and a0, 7, t4 # .. e1 : find dest misalignment + and a1, 7, t5 # e0 : find src misalignment + + /* Conditionally load the first destination word and a bytemask + with 0xff indicating that the destination byte is sacrosanct. */ + + mov zero, t0 # .. e1 : + mov zero, t6 # e0 : + beq t4, 1f # .. e1 : + ldq_u t0, 0(a0) # e0 : + lda t6, -1 # .. e1 : + mskql t6, a0, t6 # e0 : +1: + subq a1, t4, a1 # .. e1 : sub dest misalignment from src addr + + /* If source misalignment is larger than dest misalignment, we need + extra startup checks to avoid SEGV. */ + + cmplt t4, t5, t12 # e0 : + beq t12, $u_head # .. e1 (zdb) + + lda t2, -1 # e1 : mask out leading garbage in source + mskqh t2, t5, t2 # e0 : + nop # e0 : + ornot t1, t2, t3 # .. e1 : + cmpbge zero, t3, t8 # e0 : is there a zero? + beq t8, $u_head # .. e1 (zdb) + + /* At this point we've found a zero in the first partial word of + the source. We need to isolate the valid source data and mask + it into the original destination data. (Incidentally, we know + that we'll need at least one byte of that original dest word.) */ + + ldq_u t0, 0(a0) # e0 : + + negq t8, t6 # .. e1 : build bitmask of bytes <= zero + and t6, t8, t12 # e0 : + and a1, 7, t5 # .. e1 : + subq t12, 1, t6 # e0 : + or t6, t12, t8 # e1 : + srl t12, t5, t12 # e0 : adjust final null return value + + zapnot t2, t8, t2 # .. e1 : prepare source word; mirror changes + and t1, t2, t1 # e1 : to source validity mask + extql t2, a1, t2 # .. e0 : + extql t1, a1, t1 # e0 : + + andnot t0, t2, t0 # .. e1 : zero place for source to reside + or t0, t1, t1 # e1 : and put it there + stq_u t1, 0(a0) # .. e0 : + ret (t9) # e1 : + + .end __stxcpy diff --git a/arch/alpha/lib/stxncpy.S b/arch/alpha/lib/stxncpy.S new file mode 100644 index 0000000000..011d9091c6 --- /dev/null +++ b/arch/alpha/lib/stxncpy.S @@ -0,0 +1,346 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * arch/alpha/lib/stxncpy.S + * Contributed by Richard Henderson (rth@tamu.edu) + * + * Copy no more than COUNT bytes of the null-terminated string from + * SRC to DST. + * + * This is an internal routine used by strncpy, stpncpy, and strncat. + * As such, it uses special linkage conventions to make implementation + * of these public functions more efficient. + * + * On input: + * t9 = return address + * a0 = DST + * a1 = SRC + * a2 = COUNT + * + * Furthermore, COUNT may not be zero. + * + * On output: + * t0 = last word written + * t10 = bitmask (with one bit set) indicating the byte position of + * the end of the range specified by COUNT + * t12 = bitmask (with one bit set) indicating the last byte written + * a0 = unaligned address of the last *word* written + * a2 = the number of full words left in COUNT + * + * Furthermore, v0, a3-a5, t11, and $at are untouched. + */ + +#include <asm/regdef.h> + + .set noat + .set noreorder + + .text + +/* There is a problem with either gdb (as of 4.16) or gas (as of 2.7) that + doesn't like putting the entry point for a procedure somewhere in the + middle of the procedure descriptor. Work around this by putting the + aligned copy in its own procedure descriptor */ + + .ent stxncpy_aligned + .align 3 +stxncpy_aligned: + .frame sp, 0, t9, 0 + .prologue 0 + + /* On entry to this basic block: + t0 == the first destination word for masking back in + t1 == the first source word. */ + + /* Create the 1st output word and detect 0's in the 1st input word. */ + lda t2, -1 # e1 : build a mask against false zero + mskqh t2, a1, t2 # e0 : detection in the src word + mskqh t1, a1, t3 # e0 : + ornot t1, t2, t2 # .. e1 : + mskql t0, a1, t0 # e0 : assemble the first output word + cmpbge zero, t2, t8 # .. e1 : bits set iff null found + or t0, t3, t0 # e0 : + beq a2, $a_eoc # .. e1 : + bne t8, $a_eos # .. e1 : + + /* On entry to this basic block: + t0 == a source word not containing a null. */ + +$a_loop: + stq_u t0, 0(a0) # e0 : + addq a0, 8, a0 # .. e1 : + ldq_u t0, 0(a1) # e0 : + addq a1, 8, a1 # .. e1 : + subq a2, 1, a2 # e0 : + cmpbge zero, t0, t8 # .. e1 (stall) + beq a2, $a_eoc # e1 : + beq t8, $a_loop # e1 : + + /* Take care of the final (partial) word store. At this point + the end-of-count bit is set in t8 iff it applies. + + On entry to this basic block we have: + t0 == the source word containing the null + t8 == the cmpbge mask that found it. */ + +$a_eos: + negq t8, t12 # e0 : find low bit set + and t8, t12, t12 # e1 (stall) + + /* For the sake of the cache, don't read a destination word + if we're not going to need it. */ + and t12, 0x80, t6 # e0 : + bne t6, 1f # .. e1 (zdb) + + /* We're doing a partial word store and so need to combine + our source and original destination words. */ + ldq_u t1, 0(a0) # e0 : + subq t12, 1, t6 # .. e1 : + or t12, t6, t8 # e0 : + unop # + zapnot t0, t8, t0 # e0 : clear src bytes > null + zap t1, t8, t1 # .. e1 : clear dst bytes <= null + or t0, t1, t0 # e1 : + +1: stq_u t0, 0(a0) # e0 : + ret (t9) # e1 : + + /* Add the end-of-count bit to the eos detection bitmask. */ +$a_eoc: + or t10, t8, t8 + br $a_eos + + .end stxncpy_aligned + + .align 3 + .ent __stxncpy + .globl __stxncpy +__stxncpy: + .frame sp, 0, t9, 0 + .prologue 0 + + /* Are source and destination co-aligned? */ + xor a0, a1, t1 # e0 : + and a0, 7, t0 # .. e1 : find dest misalignment + and t1, 7, t1 # e0 : + addq a2, t0, a2 # .. e1 : bias count by dest misalignment + subq a2, 1, a2 # e0 : + and a2, 7, t2 # e1 : + srl a2, 3, a2 # e0 : a2 = loop counter = (count - 1)/8 + addq zero, 1, t10 # .. e1 : + sll t10, t2, t10 # e0 : t10 = bitmask of last count byte + bne t1, $unaligned # .. e1 : + + /* We are co-aligned; take care of a partial first word. */ + + ldq_u t1, 0(a1) # e0 : load first src word + addq a1, 8, a1 # .. e1 : + + beq t0, stxncpy_aligned # avoid loading dest word if not needed + ldq_u t0, 0(a0) # e0 : + br stxncpy_aligned # .. e1 : + + +/* The source and destination are not co-aligned. Align the destination + and cope. We have to be very careful about not reading too much and + causing a SEGV. */ + + .align 3 +$u_head: + /* We know just enough now to be able to assemble the first + full source word. We can still find a zero at the end of it + that prevents us from outputting the whole thing. + + On entry to this basic block: + t0 == the first dest word, unmasked + t1 == the shifted low bits of the first source word + t6 == bytemask that is -1 in dest word bytes */ + + ldq_u t2, 8(a1) # e0 : load second src word + addq a1, 8, a1 # .. e1 : + mskql t0, a0, t0 # e0 : mask trailing garbage in dst + extqh t2, a1, t4 # e0 : + or t1, t4, t1 # e1 : first aligned src word complete + mskqh t1, a0, t1 # e0 : mask leading garbage in src + or t0, t1, t0 # e0 : first output word complete + or t0, t6, t6 # e1 : mask original data for zero test + cmpbge zero, t6, t8 # e0 : + beq a2, $u_eocfin # .. e1 : + lda t6, -1 # e0 : + bne t8, $u_final # .. e1 : + + mskql t6, a1, t6 # e0 : mask out bits already seen + nop # .. e1 : + stq_u t0, 0(a0) # e0 : store first output word + or t6, t2, t2 # .. e1 : + cmpbge zero, t2, t8 # e0 : find nulls in second partial + addq a0, 8, a0 # .. e1 : + subq a2, 1, a2 # e0 : + bne t8, $u_late_head_exit # .. e1 : + + /* Finally, we've got all the stupid leading edge cases taken care + of and we can set up to enter the main loop. */ + + extql t2, a1, t1 # e0 : position hi-bits of lo word + beq a2, $u_eoc # .. e1 : + ldq_u t2, 8(a1) # e0 : read next high-order source word + addq a1, 8, a1 # .. e1 : + extqh t2, a1, t0 # e0 : position lo-bits of hi word (stall) + cmpbge zero, t2, t8 # .. e1 : + nop # e0 : + bne t8, $u_eos # .. e1 : + + /* Unaligned copy main loop. In order to avoid reading too much, + the loop is structured to detect zeros in aligned source words. + This has, unfortunately, effectively pulled half of a loop + iteration out into the head and half into the tail, but it does + prevent nastiness from accumulating in the very thing we want + to run as fast as possible. + + On entry to this basic block: + t0 == the shifted low-order bits from the current source word + t1 == the shifted high-order bits from the previous source word + t2 == the unshifted current source word + + We further know that t2 does not contain a null terminator. */ + + .align 3 +$u_loop: + or t0, t1, t0 # e0 : current dst word now complete + subq a2, 1, a2 # .. e1 : decrement word count + stq_u t0, 0(a0) # e0 : save the current word + addq a0, 8, a0 # .. e1 : + extql t2, a1, t1 # e0 : extract high bits for next time + beq a2, $u_eoc # .. e1 : + ldq_u t2, 8(a1) # e0 : load high word for next time + addq a1, 8, a1 # .. e1 : + nop # e0 : + cmpbge zero, t2, t8 # e1 : test new word for eos (stall) + extqh t2, a1, t0 # e0 : extract low bits for current word + beq t8, $u_loop # .. e1 : + + /* We've found a zero somewhere in the source word we just read. + If it resides in the lower half, we have one (probably partial) + word to write out, and if it resides in the upper half, we + have one full and one partial word left to write out. + + On entry to this basic block: + t0 == the shifted low-order bits from the current source word + t1 == the shifted high-order bits from the previous source word + t2 == the unshifted current source word. */ +$u_eos: + or t0, t1, t0 # e0 : first (partial) source word complete + nop # .. e1 : + cmpbge zero, t0, t8 # e0 : is the null in this first bit? + bne t8, $u_final # .. e1 (zdb) + + stq_u t0, 0(a0) # e0 : the null was in the high-order bits + addq a0, 8, a0 # .. e1 : + subq a2, 1, a2 # e1 : + +$u_late_head_exit: + extql t2, a1, t0 # .. e0 : + cmpbge zero, t0, t8 # e0 : + or t8, t10, t6 # e1 : + cmoveq a2, t6, t8 # e0 : + nop # .. e1 : + + /* Take care of a final (probably partial) result word. + On entry to this basic block: + t0 == assembled source word + t8 == cmpbge mask that found the null. */ +$u_final: + negq t8, t6 # e0 : isolate low bit set + and t6, t8, t12 # e1 : + + and t12, 0x80, t6 # e0 : avoid dest word load if we can + bne t6, 1f # .. e1 (zdb) + + ldq_u t1, 0(a0) # e0 : + subq t12, 1, t6 # .. e1 : + or t6, t12, t8 # e0 : + zapnot t0, t8, t0 # .. e1 : kill source bytes > null + zap t1, t8, t1 # e0 : kill dest bytes <= null + or t0, t1, t0 # e1 : + +1: stq_u t0, 0(a0) # e0 : + ret (t9) # .. e1 : + + /* Got to end-of-count before end of string. + On entry to this basic block: + t1 == the shifted high-order bits from the previous source word */ +$u_eoc: + and a1, 7, t6 # e1 : + sll t10, t6, t6 # e0 : + and t6, 0xff, t6 # e0 : + bne t6, 1f # .. e1 : + + ldq_u t2, 8(a1) # e0 : load final src word + nop # .. e1 : + extqh t2, a1, t0 # e0 : extract low bits for last word + or t1, t0, t1 # e1 : + +1: cmpbge zero, t1, t8 + mov t1, t0 + +$u_eocfin: # end-of-count, final word + or t10, t8, t8 + br $u_final + + /* Unaligned copy entry point. */ + .align 3 +$unaligned: + + ldq_u t1, 0(a1) # e0 : load first source word + + and a0, 7, t4 # .. e1 : find dest misalignment + and a1, 7, t5 # e0 : find src misalignment + + /* Conditionally load the first destination word and a bytemask + with 0xff indicating that the destination byte is sacrosanct. */ + + mov zero, t0 # .. e1 : + mov zero, t6 # e0 : + beq t4, 1f # .. e1 : + ldq_u t0, 0(a0) # e0 : + lda t6, -1 # .. e1 : + mskql t6, a0, t6 # e0 : + subq a1, t4, a1 # .. e1 : sub dest misalignment from src addr + + /* If source misalignment is larger than dest misalignment, we need + extra startup checks to avoid SEGV. */ + +1: cmplt t4, t5, t12 # e1 : + extql t1, a1, t1 # .. e0 : shift src into place + lda t2, -1 # e0 : for creating masks later + beq t12, $u_head # .. e1 : + + extql t2, a1, t2 # e0 : + cmpbge zero, t1, t8 # .. e1 : is there a zero? + andnot t2, t6, t2 # e0 : dest mask for a single word copy + or t8, t10, t5 # .. e1 : test for end-of-count too + cmpbge zero, t2, t3 # e0 : + cmoveq a2, t5, t8 # .. e1 : + andnot t8, t3, t8 # e0 : + beq t8, $u_head # .. e1 (zdb) + + /* At this point we've found a zero in the first partial word of + the source. We need to isolate the valid source data and mask + it into the original destination data. (Incidentally, we know + that we'll need at least one byte of that original dest word.) */ + + ldq_u t0, 0(a0) # e0 : + negq t8, t6 # .. e1 : build bitmask of bytes <= zero + mskqh t1, t4, t1 # e0 : + and t6, t8, t12 # .. e1 : + subq t12, 1, t6 # e0 : + or t6, t12, t8 # e1 : + + zapnot t2, t8, t2 # e0 : prepare source word; mirror changes + zapnot t1, t8, t1 # .. e1 : to source validity mask + + andnot t0, t2, t0 # e0 : zero place for source to reside + or t0, t1, t0 # e1 : and put it there + stq_u t0, 0(a0) # e0 : + ret (t9) # .. e1 : + + .end __stxncpy diff --git a/arch/alpha/lib/udelay.c b/arch/alpha/lib/udelay.c new file mode 100644 index 0000000000..8736482634 --- /dev/null +++ b/arch/alpha/lib/udelay.c @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 1993, 2000 Linus Torvalds + * + * Delay routines, using a pre-computed "loops_per_jiffy" value. + */ + +#include <linux/module.h> +#include <linux/sched.h> /* for udelay's use of smp_processor_id */ +#include <asm/param.h> +#include <asm/smp.h> +#include <linux/delay.h> + +/* + * Use only for very small delays (< 1 msec). + * + * The active part of our cycle counter is only 32-bits wide, and + * we're treating the difference between two marks as signed. On + * a 1GHz box, that's about 2 seconds. + */ + +void +__delay(int loops) +{ + int tmp; + __asm__ __volatile__( + " rpcc %0\n" + " addl %1,%0,%1\n" + "1: rpcc %0\n" + " subl %1,%0,%0\n" + " bgt %0,1b" + : "=&r" (tmp), "=r" (loops) : "1"(loops)); +} +EXPORT_SYMBOL(__delay); + +#ifdef CONFIG_SMP +#define LPJ cpu_data[smp_processor_id()].loops_per_jiffy +#else +#define LPJ loops_per_jiffy +#endif + +void +udelay(unsigned long usecs) +{ + usecs *= (((unsigned long)HZ << 32) / 1000000) * LPJ; + __delay((long)usecs >> 32); +} +EXPORT_SYMBOL(udelay); + +void +ndelay(unsigned long nsecs) +{ + nsecs *= (((unsigned long)HZ << 32) / 1000000000) * LPJ; + __delay((long)nsecs >> 32); +} +EXPORT_SYMBOL(ndelay); diff --git a/arch/alpha/lib/udiv-qrnnd.S b/arch/alpha/lib/udiv-qrnnd.S new file mode 100644 index 0000000000..96f05918bf --- /dev/null +++ b/arch/alpha/lib/udiv-qrnnd.S @@ -0,0 +1,165 @@ + # Alpha 21064 __udiv_qrnnd + # Copyright (C) 1992, 1994, 1995, 2000 Free Software Foundation, Inc. + + # This file is part of GCC. + + # The GNU MP Library is free software; you can redistribute it and/or modify + # it under the terms of the GNU General Public License as published by + # the Free Software Foundation; either version 2 of the License, or (at your + # option) any later version. + + # In addition to the permissions in the GNU General Public License, the + # Free Software Foundation gives you unlimited permission to link the + # compiled version of this file with other programs, and to distribute + # those programs without any restriction coming from the use of this + # file. (The General Public License restrictions do apply in other + # respects; for example, they cover modification of the file, and + # distribution when not linked into another program.) + + # This file is distributed in the hope that it will be useful, but + # WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + # or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Library General Public + # License for more details. + + # You should have received a copy of the GNU General Public License + # along with GCC; see the file COPYING. If not, write to the + # Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, + # MA 02111-1307, USA. +#include <linux/export.h> + + .set noreorder + .set noat + + .text + + .globl __udiv_qrnnd + .ent __udiv_qrnnd +__udiv_qrnnd: + .frame $30,0,$26,0 + .prologue 0 + +#define cnt $2 +#define tmp $3 +#define rem_ptr $16 +#define n1 $17 +#define n0 $18 +#define d $19 +#define qb $20 +#define AT $at + + ldiq cnt,16 + blt d,$largedivisor + +$loop1: cmplt n0,0,tmp + addq n1,n1,n1 + bis n1,tmp,n1 + addq n0,n0,n0 + cmpule d,n1,qb + subq n1,d,tmp + cmovne qb,tmp,n1 + bis n0,qb,n0 + cmplt n0,0,tmp + addq n1,n1,n1 + bis n1,tmp,n1 + addq n0,n0,n0 + cmpule d,n1,qb + subq n1,d,tmp + cmovne qb,tmp,n1 + bis n0,qb,n0 + cmplt n0,0,tmp + addq n1,n1,n1 + bis n1,tmp,n1 + addq n0,n0,n0 + cmpule d,n1,qb + subq n1,d,tmp + cmovne qb,tmp,n1 + bis n0,qb,n0 + cmplt n0,0,tmp + addq n1,n1,n1 + bis n1,tmp,n1 + addq n0,n0,n0 + cmpule d,n1,qb + subq n1,d,tmp + cmovne qb,tmp,n1 + bis n0,qb,n0 + subq cnt,1,cnt + bgt cnt,$loop1 + stq n1,0(rem_ptr) + bis $31,n0,$0 + ret $31,($26),1 + +$largedivisor: + and n0,1,$4 + + srl n0,1,n0 + sll n1,63,tmp + or tmp,n0,n0 + srl n1,1,n1 + + and d,1,$6 + srl d,1,$5 + addq $5,$6,$5 + +$loop2: cmplt n0,0,tmp + addq n1,n1,n1 + bis n1,tmp,n1 + addq n0,n0,n0 + cmpule $5,n1,qb + subq n1,$5,tmp + cmovne qb,tmp,n1 + bis n0,qb,n0 + cmplt n0,0,tmp + addq n1,n1,n1 + bis n1,tmp,n1 + addq n0,n0,n0 + cmpule $5,n1,qb + subq n1,$5,tmp + cmovne qb,tmp,n1 + bis n0,qb,n0 + cmplt n0,0,tmp + addq n1,n1,n1 + bis n1,tmp,n1 + addq n0,n0,n0 + cmpule $5,n1,qb + subq n1,$5,tmp + cmovne qb,tmp,n1 + bis n0,qb,n0 + cmplt n0,0,tmp + addq n1,n1,n1 + bis n1,tmp,n1 + addq n0,n0,n0 + cmpule $5,n1,qb + subq n1,$5,tmp + cmovne qb,tmp,n1 + bis n0,qb,n0 + subq cnt,1,cnt + bgt cnt,$loop2 + + addq n1,n1,n1 + addq $4,n1,n1 + bne $6,$Odd + stq n1,0(rem_ptr) + bis $31,n0,$0 + ret $31,($26),1 + +$Odd: + /* q' in n0. r' in n1 */ + addq n1,n0,n1 + + cmpult n1,n0,tmp # tmp := carry from addq + subq n1,d,AT + addq n0,tmp,n0 + cmovne tmp,AT,n1 + + cmpult n1,d,tmp + addq n0,1,AT + cmoveq tmp,AT,n0 + subq n1,d,AT + cmoveq tmp,AT,n1 + + stq n1,0(rem_ptr) + bis $31,n0,$0 + ret $31,($26),1 + + .end __udiv_qrnnd +EXPORT_SYMBOL(__udiv_qrnnd) |