diff options
Diffstat (limited to '')
205 files changed, 27673 insertions, 0 deletions
diff --git a/arch/arc/Kbuild b/arch/arc/Kbuild new file mode 100644 index 0000000000..b94102fff6 --- /dev/null +++ b/arch/arc/Kbuild @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0 +obj-y += kernel/ +obj-y += mm/ + +# for cleaning +subdir- += boot diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig new file mode 100644 index 0000000000..3162db540e --- /dev/null +++ b/arch/arc/Kconfig @@ -0,0 +1,566 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) +# + +config ARC + def_bool y + select ARC_TIMERS + select ARCH_HAS_CACHE_LINE_SIZE + select ARCH_HAS_DEBUG_VM_PGTABLE + select ARCH_HAS_DMA_PREP_COHERENT + select ARCH_HAS_PTE_SPECIAL + select ARCH_HAS_SETUP_DMA_OPS + select ARCH_HAS_SYNC_DMA_FOR_CPU + select ARCH_HAS_SYNC_DMA_FOR_DEVICE + select ARCH_SUPPORTS_ATOMIC_RMW if ARC_HAS_LLSC + select ARCH_32BIT_OFF_T + select BUILDTIME_TABLE_SORT + select CLONE_BACKWARDS + select COMMON_CLK + select DMA_DIRECT_REMAP + select GENERIC_ATOMIC64 if !ISA_ARCV2 || !(ARC_HAS_LL64 && ARC_HAS_LLSC) + # for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP + select GENERIC_IRQ_SHOW + select GENERIC_PCI_IOMAP + select GENERIC_PENDING_IRQ if SMP + select GENERIC_SCHED_CLOCK + select GENERIC_SMP_IDLE_THREAD + select GENERIC_IOREMAP + select GENERIC_STRNCPY_FROM_USER if MMU + select GENERIC_STRNLEN_USER if MMU + select HAVE_ARCH_KGDB + select HAVE_ARCH_TRACEHOOK + select HAVE_ARCH_TRANSPARENT_HUGEPAGE if ARC_MMU_V4 + select HAVE_DEBUG_STACKOVERFLOW + select HAVE_DEBUG_KMEMLEAK + select HAVE_IOREMAP_PROT + select HAVE_KERNEL_GZIP + select HAVE_KERNEL_LZMA + select HAVE_KPROBES + select HAVE_KRETPROBES + select HAVE_REGS_AND_STACK_ACCESS_API + select HAVE_MOD_ARCH_SPECIFIC + select HAVE_PERF_EVENTS + select HAVE_SYSCALL_TRACEPOINTS + select IRQ_DOMAIN + select LOCK_MM_AND_FIND_VMA + select MODULES_USE_ELF_RELA + select OF + select OF_EARLY_FLATTREE + select PCI_SYSCALL if PCI + select PERF_USE_VMALLOC if ARC_CACHE_VIPT_ALIASING + select HAVE_ARCH_JUMP_LABEL if ISA_ARCV2 && !CPU_ENDIAN_BE32 + select TRACE_IRQFLAGS_SUPPORT + +config LOCKDEP_SUPPORT + def_bool y + +config SCHED_OMIT_FRAME_POINTER + def_bool y + +config GENERIC_CSUM + def_bool y + +config ARCH_FLATMEM_ENABLE + def_bool y + +config MMU + def_bool y + +config NO_IOPORT_MAP + def_bool y + +config GENERIC_CALIBRATE_DELAY + def_bool y + +config GENERIC_HWEIGHT + def_bool y + +config STACKTRACE_SUPPORT + def_bool y + select STACKTRACE + +menu "ARC Architecture Configuration" + +menu "ARC Platform/SoC/Board" + +source "arch/arc/plat-tb10x/Kconfig" +source "arch/arc/plat-axs10x/Kconfig" +source "arch/arc/plat-hsdk/Kconfig" + +endmenu + +choice + prompt "ARC Instruction Set" + default ISA_ARCV2 + +config ISA_ARCOMPACT + bool "ARCompact ISA" + select CPU_NO_EFFICIENT_FFS + help + The original ARC ISA of ARC600/700 cores + +config ISA_ARCV2 + bool "ARC ISA v2" + select ARC_TIMERS_64BIT + help + ISA for the Next Generation ARC-HS cores + +endchoice + +menu "ARC CPU Configuration" + +choice + prompt "ARC Core" + default ARC_CPU_770 if ISA_ARCOMPACT + default ARC_CPU_HS if ISA_ARCV2 + +config ARC_CPU_770 + bool "ARC770" + depends on ISA_ARCOMPACT + select ARC_HAS_SWAPE + help + Support for ARC770 core introduced with Rel 4.10 (Summer 2011) + This core has a bunch of cool new features: + -MMU-v3: Variable Page Sz (4k, 8k, 16k), bigger J-TLB (128x4) + Shared Address Spaces (for sharing TLB entries in MMU) + -Caches: New Prog Model, Region Flush + -Insns: endian swap, load-locked/store-conditional, time-stamp-ctr + +config ARC_CPU_HS + bool "ARC-HS" + depends on ISA_ARCV2 + help + Support for ARC HS38x Cores based on ARCv2 ISA + The notable features are: + - SMP configurations of up to 4 cores with coherency + - Optional L2 Cache and IO-Coherency + - Revised Interrupt Architecture (multiple priorites, reg banks, + auto stack switch, auto regfile save/restore) + - MMUv4 (PIPT dcache, Huge Pages) + - Instructions for + * 64bit load/store: LDD, STD + * Hardware assisted divide/remainder: DIV, REM + * Function prologue/epilogue: ENTER_S, LEAVE_S + * IRQ enable/disable: CLRI, SETI + * pop count: FFS, FLS + * SETcc, BMSKN, XBFU... + +endchoice + +config ARC_TUNE_MCPU + string "Override default -mcpu compiler flag" + default "" + help + Override default -mcpu=xxx compiler flag (which is set depending on + the ISA version) with the specified value. + NOTE: If specified flag isn't supported by current compiler the + ISA default value will be used as a fallback. + +config CPU_BIG_ENDIAN + bool "Enable Big Endian Mode" + help + Build kernel for Big Endian Mode of ARC CPU + +config SMP + bool "Symmetric Multi-Processing" + select ARC_MCIP if ISA_ARCV2 + help + This enables support for systems with more than one CPU. + +if SMP + +config NR_CPUS + int "Maximum number of CPUs (2-4096)" + range 2 4096 + default "4" + +config ARC_SMP_HALT_ON_RESET + bool "Enable Halt-on-reset boot mode" + help + In SMP configuration cores can be configured as Halt-on-reset + or they could all start at same time. For Halt-on-reset, non + masters are parked until Master kicks them so they can start off + at designated entry point. For other case, all jump to common + entry point and spin wait for Master's signal. + +endif #SMP + +config ARC_MCIP + bool "ARConnect Multicore IP (MCIP) Support " + depends on ISA_ARCV2 + default y if SMP + help + This IP block enables SMP in ARC-HS38 cores. + It provides for cross-core interrupts, multi-core debug + hardware semaphores, shared memory,.... + +menuconfig ARC_CACHE + bool "Enable Cache Support" + default y + +if ARC_CACHE + +config ARC_CACHE_LINE_SHIFT + int "Cache Line Length (as power of 2)" + range 5 7 + default "6" + help + Starting with ARC700 4.9, Cache line length is configurable, + This option specifies "N", with Line-len = 2 power N + So line lengths of 32, 64, 128 are specified by 5,6,7, respectively + Linux only supports same line lengths for I and D caches. + +config ARC_HAS_ICACHE + bool "Use Instruction Cache" + default y + +config ARC_HAS_DCACHE + bool "Use Data Cache" + default y + +config ARC_CACHE_PAGES + bool "Per Page Cache Control" + default y + depends on ARC_HAS_ICACHE || ARC_HAS_DCACHE + help + This can be used to over-ride the global I/D Cache Enable on a + per-page basis (but only for pages accessed via MMU such as + Kernel Virtual address or User Virtual Address) + TLB entries have a per-page Cache Enable Bit. + Note that Global I/D ENABLE + Per Page DISABLE works but corollary + Global DISABLE + Per Page ENABLE won't work + +config ARC_CACHE_VIPT_ALIASING + bool "Support VIPT Aliasing D$" + depends on ARC_HAS_DCACHE && ISA_ARCOMPACT + +endif #ARC_CACHE + +config ARC_HAS_ICCM + bool "Use ICCM" + help + Single Cycle RAMS to store Fast Path Code + +config ARC_ICCM_SZ + int "ICCM Size in KB" + default "64" + depends on ARC_HAS_ICCM + +config ARC_HAS_DCCM + bool "Use DCCM" + help + Single Cycle RAMS to store Fast Path Data + +config ARC_DCCM_SZ + int "DCCM Size in KB" + default "64" + depends on ARC_HAS_DCCM + +config ARC_DCCM_BASE + hex "DCCM map address" + default "0xA0000000" + depends on ARC_HAS_DCCM + +choice + prompt "MMU Version" + default ARC_MMU_V3 if ISA_ARCOMPACT + default ARC_MMU_V4 if ISA_ARCV2 + +config ARC_MMU_V3 + bool "MMU v3" + depends on ISA_ARCOMPACT + help + Introduced with ARC700 4.10: New Features + Variable Page size (1k-16k), var JTLB size 128 x (2 or 4) + Shared Address Spaces (SASID) + +config ARC_MMU_V4 + bool "MMU v4" + depends on ISA_ARCV2 + +endchoice + + +choice + prompt "MMU Page Size" + default ARC_PAGE_SIZE_8K + +config ARC_PAGE_SIZE_8K + bool "8KB" + help + Choose between 8k vs 16k + +config ARC_PAGE_SIZE_16K + bool "16KB" + +config ARC_PAGE_SIZE_4K + bool "4KB" + depends on ARC_MMU_V3 || ARC_MMU_V4 + +endchoice + +choice + prompt "MMU Super Page Size" + depends on ISA_ARCV2 && TRANSPARENT_HUGEPAGE + default ARC_HUGEPAGE_2M + +config ARC_HUGEPAGE_2M + bool "2MB" + +config ARC_HUGEPAGE_16M + bool "16MB" + +endchoice + +config PGTABLE_LEVELS + int "Number of Page table levels" + default 2 + +config ARC_COMPACT_IRQ_LEVELS + depends on ISA_ARCOMPACT + bool "Setup Timer IRQ as high Priority" + # if SMP, LV2 enabled ONLY if ARC implementation has LV2 re-entrancy + depends on !SMP + +config ARC_FPU_SAVE_RESTORE + bool "Enable FPU state persistence across context switch" + help + ARCompact FPU has internal registers to assist with Double precision + Floating Point operations. There are control and stauts registers + for floating point exceptions and rounding modes. These are + preserved across task context switch when enabled. + +config ARC_CANT_LLSC + def_bool n + +config ARC_HAS_LLSC + bool "Insn: LLOCK/SCOND (efficient atomic ops)" + default y + depends on !ARC_CANT_LLSC + +config ARC_HAS_SWAPE + bool "Insn: SWAPE (endian-swap)" + default y + +if ISA_ARCV2 + +config ARC_USE_UNALIGNED_MEM_ACCESS + bool "Enable unaligned access in HW" + default y + select HAVE_EFFICIENT_UNALIGNED_ACCESS + help + The ARC HS architecture supports unaligned memory access + which is disabled by default. Enable unaligned access in + hardware and use software to use it + +config ARC_HAS_LL64 + bool "Insn: 64bit LDD/STD" + help + Enable gcc to generate 64-bit load/store instructions + ISA mandates even/odd registers to allow encoding of two + dest operands with 2 possible source operands. + default y + +config ARC_HAS_DIV_REM + bool "Insn: div, divu, rem, remu" + default y + +config ARC_HAS_ACCL_REGS + bool "Reg Pair ACCL:ACCH (FPU and/or MPY > 6 and/or DSP)" + default y + help + Depending on the configuration, CPU can contain accumulator reg-pair + (also referred to as r58:r59). These can also be used by gcc as GPR so + kernel needs to save/restore per process + +config ARC_DSP_HANDLED + def_bool n + +config ARC_DSP_SAVE_RESTORE_REGS + def_bool n + +choice + prompt "DSP support" + default ARC_DSP_NONE + help + Depending on the configuration, CPU can contain DSP registers + (ACC0_GLO, ACC0_GHI, DSP_BFLY0, DSP_CTRL, DSP_FFT_CTRL). + Below are options describing how to handle these registers in + interrupt entry / exit and in context switch. + +config ARC_DSP_NONE + bool "No DSP extension presence in HW" + help + No DSP extension presence in HW + +config ARC_DSP_KERNEL + bool "DSP extension in HW, no support for userspace" + select ARC_HAS_ACCL_REGS + select ARC_DSP_HANDLED + help + DSP extension presence in HW, no support for DSP-enabled userspace + applications. We don't save / restore DSP registers and only do + some minimal preparations so userspace won't be able to break kernel + +config ARC_DSP_USERSPACE + bool "Support DSP for userspace apps" + select ARC_HAS_ACCL_REGS + select ARC_DSP_HANDLED + select ARC_DSP_SAVE_RESTORE_REGS + help + DSP extension presence in HW, support save / restore DSP registers to + run DSP-enabled userspace applications + +config ARC_DSP_AGU_USERSPACE + bool "Support DSP with AGU for userspace apps" + select ARC_HAS_ACCL_REGS + select ARC_DSP_HANDLED + select ARC_DSP_SAVE_RESTORE_REGS + help + DSP and AGU extensions presence in HW, support save / restore DSP + and AGU registers to run DSP-enabled userspace applications +endchoice + +config ARC_IRQ_NO_AUTOSAVE + bool "Disable hardware autosave regfile on interrupts" + default n + help + On HS cores, taken interrupt auto saves the regfile on stack. + This is programmable and can be optionally disabled in which case + software INTERRUPT_PROLOGUE/EPILGUE do the needed work + +config ARC_LPB_DISABLE + bool "Disable loop buffer (LPB)" + help + On HS cores, loop buffer (LPB) is programmable in runtime and can + be optionally disabled. + +endif # ISA_ARCV2 + +endmenu # "ARC CPU Configuration" + +config LINUX_LINK_BASE + hex "Kernel link address" + default "0x80000000" + help + ARC700 divides the 32 bit phy address space into two equal halves + -Lower 2G (0 - 0x7FFF_FFFF ) is user virtual, translated by MMU + -Upper 2G (0x8000_0000 onwards) is untranslated, for kernel + Typically Linux kernel is linked at the start of untransalted addr, + hence the default value of 0x8zs. + However some customers have peripherals mapped at this addr, so + Linux needs to be scooted a bit. + If you don't know what the above means, leave this setting alone. + This needs to match memory start address specified in Device Tree + +config LINUX_RAM_BASE + hex "RAM base address" + default LINUX_LINK_BASE + help + By default Linux is linked at base of RAM. However in some special + cases (such as HSDK), Linux can't be linked at start of DDR, hence + this option. + +config HIGHMEM + bool "High Memory Support" + select HAVE_ARCH_PFN_VALID + select KMAP_LOCAL + help + With ARC 2G:2G address split, only upper 2G is directly addressable by + kernel. Enable this to potentially allow access to rest of 2G and PAE + in future + +config ARC_HAS_PAE40 + bool "Support for the 40-bit Physical Address Extension" + depends on ISA_ARCV2 + select HIGHMEM + select PHYS_ADDR_T_64BIT + help + Enable access to physical memory beyond 4G, only supported on + ARC cores with 40 bit Physical Addressing support + +config ARC_KVADDR_SIZE + int "Kernel Virtual Address Space size (MB)" + range 0 512 + default "256" + help + The kernel address space is carved out of 256MB of translated address + space for catering to vmalloc, modules, pkmap, fixmap. This however may + not suffice vmalloc requirements of a 4K CPU EZChip system. So allow + this to be stretched to 512 MB (by extending into the reserved + kernel-user gutter) + +config ARC_CURR_IN_REG + bool "cache current task pointer in gp" + default y + help + This reserves gp register to point to Current Task in + kernel mode eliding memory access for each access + + +config ARC_EMUL_UNALIGNED + bool "Emulate unaligned memory access (userspace only)" + select SYSCTL_ARCH_UNALIGN_NO_WARN + select SYSCTL_ARCH_UNALIGN_ALLOW + depends on ISA_ARCOMPACT + help + This enables misaligned 16 & 32 bit memory access from user space. + Use ONLY-IF-ABS-NECESSARY as it will be very slow and also can hide + potential bugs in code + +config HZ + int "Timer Frequency" + default 100 + +config ARC_METAWARE_HLINK + bool "Support for Metaware debugger assisted Host access" + help + This options allows a Linux userland apps to directly access + host file system (open/creat/read/write etc) with help from + Metaware Debugger. This can come in handy for Linux-host communication + when there is no real usable peripheral such as EMAC. + +menuconfig ARC_DBG + bool "ARC debugging" + default y + +if ARC_DBG + +config ARC_DW2_UNWIND + bool "Enable DWARF specific kernel stack unwind" + default y + select KALLSYMS + help + Compiles the kernel with DWARF unwind information and can be used + to get stack backtraces. + + If you say Y here the resulting kernel image will be slightly larger + but not slower, and it will give very useful debugging information. + If you don't debug the kernel, you can say N, but we may not be able + to solve problems without frame unwind information + +config ARC_DBG_JUMP_LABEL + bool "Paranoid checks in Static Keys (jump labels) code" + depends on JUMP_LABEL + default y if STATIC_KEYS_SELFTEST + help + Enable paranoid checks and self-test of both ARC-specific and generic + part of static keys (jump labels) related code. +endif + +config ARC_BUILTIN_DTB_NAME + string "Built in DTB" + help + Set the name of the DTB to embed in the vmlinux binary + Leaving it blank selects the minimal "skeleton" dtb + +endmenu # "ARC Architecture Configuration" + +config ARCH_FORCE_MAX_ORDER + int "Maximum zone order" + default "11" if ARC_HUGEPAGE_16M + default "10" + +source "kernel/power/Kconfig" diff --git a/arch/arc/Kconfig.debug b/arch/arc/Kconfig.debug new file mode 100644 index 0000000000..45add86dec --- /dev/null +++ b/arch/arc/Kconfig.debug @@ -0,0 +1,10 @@ +# SPDX-License-Identifier: GPL-2.0 + +config 16KSTACKS + bool "Use 16Kb for kernel stacks instead of 8Kb" + help + If you say Y here the kernel will use a 16Kb stacksize for the + kernel stack attached to each process/thread. The default is 8K. + This increases the resident kernel footprint and will cause less + threads to run on the system and also increase the pressure + on the VM subsystem for higher order allocations. diff --git a/arch/arc/Makefile b/arch/arc/Makefile new file mode 100644 index 0000000000..2390dd042e --- /dev/null +++ b/arch/arc/Makefile @@ -0,0 +1,112 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) +# + +KBUILD_DEFCONFIG := haps_hs_smp_defconfig + +ifeq ($(CROSS_COMPILE),) +CROSS_COMPILE := $(call cc-cross-prefix, arc-linux- arceb-linux-) +endif + +cflags-y += -fno-common -pipe -fno-builtin -mmedium-calls -D__linux__ + +tune-mcpu-def-$(CONFIG_ISA_ARCOMPACT) := -mcpu=arc700 +tune-mcpu-def-$(CONFIG_ISA_ARCV2) := -mcpu=hs38 + +ifeq ($(CONFIG_ARC_TUNE_MCPU),) +cflags-y += $(tune-mcpu-def-y) +else +tune-mcpu := $(CONFIG_ARC_TUNE_MCPU) +ifneq ($(call cc-option,$(tune-mcpu)),) +cflags-y += $(tune-mcpu) +else +# The flag provided by 'CONFIG_ARC_TUNE_MCPU' option isn't known by this compiler +# (probably the compiler is too old). Use ISA default mcpu flag instead as a safe option. +$(warning ** WARNING ** CONFIG_ARC_TUNE_MCPU flag '$(tune-mcpu)' is unknown, fallback to '$(tune-mcpu-def-y)') +cflags-y += $(tune-mcpu-def-y) +endif +endif + +ifdef CONFIG_ARC_CURR_IN_REG +# For a global register definition, make sure it gets passed to every file +# We had a customer reported bug where some code built in kernel was NOT using +# any kernel headers, and missing the global register +# Can't do unconditionally because of recursive include issues +# due to <linux/thread_info.h> +LINUXINCLUDE += -include $(srctree)/arch/arc/include/asm/current.h +cflags-y += -ffixed-gp +endif + +cflags-y += -fsection-anchors + +cflags-$(CONFIG_ARC_HAS_LLSC) += -mlock +cflags-$(CONFIG_ARC_HAS_SWAPE) += -mswape + +ifdef CONFIG_ISA_ARCV2 + +ifdef CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS +cflags-y += -munaligned-access +else +cflags-y += -mno-unaligned-access +endif + +ifndef CONFIG_ARC_HAS_LL64 +cflags-y += -mno-ll64 +endif + +ifndef CONFIG_ARC_HAS_DIV_REM +cflags-y += -mno-div-rem +endif + +endif + +cfi := $(call as-instr,.cfi_startproc\n.cfi_endproc,-DARC_DW2_UNWIND_AS_CFI) +cflags-$(CONFIG_ARC_DW2_UNWIND) += -fasynchronous-unwind-tables $(cfi) + +# small data is default for elf32 tool-chain. If not usable, disable it +# This also allows repurposing GP as scratch reg to gcc reg allocator +disable_small_data := y +cflags-$(disable_small_data) += -mno-sdata + +cflags-$(CONFIG_CPU_BIG_ENDIAN) += -mbig-endian +ldflags-$(CONFIG_CPU_BIG_ENDIAN) += -EB + +LIBGCC = $(shell $(CC) $(cflags-y) --print-libgcc-file-name) + +# Modules with short calls might break for calls into builtin-kernel +KBUILD_CFLAGS_MODULE += -mlong-calls -mno-millicode + +# Finally dump eveything into kernel build system +KBUILD_CFLAGS += $(cflags-y) +KBUILD_AFLAGS += $(KBUILD_CFLAGS) +KBUILD_LDFLAGS += $(ldflags-y) + +# w/o this dtb won't embed into kernel binary +core-y += arch/arc/boot/dts/ + +core-y += arch/arc/plat-sim/ +core-$(CONFIG_ARC_PLAT_TB10X) += arch/arc/plat-tb10x/ +core-$(CONFIG_ARC_PLAT_AXS10X) += arch/arc/plat-axs10x/ +core-$(CONFIG_ARC_SOC_HSDK) += arch/arc/plat-hsdk/ + +libs-y += arch/arc/lib/ $(LIBGCC) + +boot := arch/arc/boot + +boot_targets := uImage.bin uImage.gz uImage.lzma + +PHONY += $(boot_targets) +$(boot_targets): vmlinux + $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ + +uimage-default-y := uImage.bin +uimage-default-$(CONFIG_KERNEL_GZIP) := uImage.gz +uimage-default-$(CONFIG_KERNEL_LZMA) := uImage.lzma + +PHONY += uImage +uImage: $(uimage-default-y) + @ln -sf $< $(boot)/uImage + @$(kecho) ' Image $(boot)/uImage is ready' + +CLEAN_FILES += $(boot)/uImage diff --git a/arch/arc/boot/.gitignore b/arch/arc/boot/.gitignore new file mode 100644 index 0000000000..675db14940 --- /dev/null +++ b/arch/arc/boot/.gitignore @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only +uImage diff --git a/arch/arc/boot/Makefile b/arch/arc/boot/Makefile new file mode 100644 index 0000000000..5648748c28 --- /dev/null +++ b/arch/arc/boot/Makefile @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: GPL-2.0 + +# uImage build relies on mkimage being availble on your host for ARC target +# You will need to build u-boot for ARC, rename mkimage to arc-elf32-mkimage +# and make sure it's reacable from your PATH + +OBJCOPYFLAGS= -O binary -R .note -R .note.gnu.build-id -R .comment -S + +LINUX_START_TEXT = $$($(READELF) -h vmlinux | \ + grep "Entry point address" | grep -o 0x.*) + +UIMAGE_LOADADDR = $(CONFIG_LINUX_LINK_BASE) +UIMAGE_ENTRYADDR = $(LINUX_START_TEXT) + +targets += vmlinux.bin +targets += vmlinux.bin.gz +targets += vmlinux.bin.lzma +targets += uImage.bin +targets += uImage.gz +targets += uImage.lzma + +$(obj)/vmlinux.bin: vmlinux FORCE + $(call if_changed,objcopy) + +$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE + $(call if_changed,gzip) + +$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE + $(call if_changed,lzma) + +$(obj)/uImage.bin: $(obj)/vmlinux.bin FORCE + $(call if_changed,uimage,none) + +$(obj)/uImage.gz: $(obj)/vmlinux.bin.gz FORCE + $(call if_changed,uimage,gzip) + +$(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma FORCE + $(call if_changed,uimage,lzma) diff --git a/arch/arc/boot/dts/Makefile b/arch/arc/boot/dts/Makefile new file mode 100644 index 0000000000..4237aa5de3 --- /dev/null +++ b/arch/arc/boot/dts/Makefile @@ -0,0 +1,17 @@ +# SPDX-License-Identifier: GPL-2.0 +# Built-in dtb +builtindtb-y := nsim_700 + +ifneq ($(CONFIG_ARC_BUILTIN_DTB_NAME),) + builtindtb-y := $(CONFIG_ARC_BUILTIN_DTB_NAME) +endif + +obj-y += $(builtindtb-y).dtb.o +dtb-y := $(builtindtb-y).dtb + +# for CONFIG_OF_ALL_DTBS test +dtstree := $(srctree)/$(src) +dtb- := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts)) + +# board-specific dtc flags +DTC_FLAGS_hsdk += --pad 20 diff --git a/arch/arc/boot/dts/abilis_tb100.dtsi b/arch/arc/boot/dts/abilis_tb100.dtsi new file mode 100644 index 0000000000..41026a3bfa --- /dev/null +++ b/arch/arc/boot/dts/abilis_tb100.dtsi @@ -0,0 +1,336 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Abilis Systems TB100 SOC device tree + * + * Copyright (C) Abilis Systems 2013 + * + * Author: Christian Ruppert <christian.ruppert@abilis.com> + */ + +/include/ "abilis_tb10x.dtsi" + + +/ { + soc100 { + bus-frequency = <166666666>; + + pll0: oscillator { + clock-frequency = <1000000000>; + }; + cpu_clk: clkdiv_cpu { + clock-mult = <1>; + clock-div = <2>; + }; + ahb_clk: clkdiv_ahb { + clock-mult = <1>; + clock-div = <6>; + }; + + iomux: iomux@ff10601c { + /* Port 1 */ + pctl_tsin_s0: pctl-tsin-s0 { /* Serial TS-in 0 */ + abilis,function = "mis0"; + }; + pctl_tsin_s1: pctl-tsin-s1 { /* Serial TS-in 1 */ + abilis,function = "mis1"; + }; + pctl_gpio_a: pctl-gpio-a { /* GPIO bank A */ + abilis,function = "gpioa"; + }; + pctl_tsin_p1: pctl-tsin-p1 { /* Parallel TS-in 1 */ + abilis,function = "mip1"; + }; + /* Port 2 */ + pctl_tsin_s2: pctl-tsin-s2 { /* Serial TS-in 2 */ + abilis,function = "mis2"; + }; + pctl_tsin_s3: pctl-tsin-s3 { /* Serial TS-in 3 */ + abilis,function = "mis3"; + }; + pctl_gpio_c: pctl-gpio-c { /* GPIO bank C */ + abilis,function = "gpioc"; + }; + pctl_tsin_p3: pctl-tsin-p3 { /* Parallel TS-in 3 */ + abilis,function = "mip3"; + }; + /* Port 3 */ + pctl_tsin_s4: pctl-tsin-s4 { /* Serial TS-in 4 */ + abilis,function = "mis4"; + }; + pctl_tsin_s5: pctl-tsin-s5 { /* Serial TS-in 5 */ + abilis,function = "mis5"; + }; + pctl_gpio_e: pctl-gpio-e { /* GPIO bank E */ + abilis,function = "gpioe"; + }; + pctl_tsin_p5: pctl-tsin-p5 { /* Parallel TS-in 5 */ + abilis,function = "mip5"; + }; + /* Port 4 */ + pctl_tsin_s6: pctl-tsin-s6 { /* Serial TS-in 6 */ + abilis,function = "mis6"; + }; + pctl_tsin_s7: pctl-tsin-s7 { /* Serial TS-in 7 */ + abilis,function = "mis7"; + }; + pctl_gpio_g: pctl-gpio-g { /* GPIO bank G */ + abilis,function = "gpiog"; + }; + pctl_tsin_p7: pctl-tsin-p7 { /* Parallel TS-in 7 */ + abilis,function = "mip7"; + }; + /* Port 5 */ + pctl_gpio_j: pctl-gpio-j { /* GPIO bank J */ + abilis,function = "gpioj"; + }; + pctl_gpio_k: pctl-gpio-k { /* GPIO bank K */ + abilis,function = "gpiok"; + }; + pctl_ciplus: pctl-ciplus { /* CI+ interface */ + abilis,function = "ciplus"; + }; + pctl_mcard: pctl-mcard { /* M-Card interface */ + abilis,function = "mcard"; + }; + /* Port 6 */ + pctl_tsout_p: pctl-tsout-p { /* Parallel TS-out */ + abilis,function = "mop"; + }; + pctl_tsout_s0: pctl-tsout-s0 { /* Serial TS-out 0 */ + abilis,function = "mos0"; + }; + pctl_tsout_s1: pctl-tsout-s1 { /* Serial TS-out 1 */ + abilis,function = "mos1"; + }; + pctl_tsout_s2: pctl-tsout-s2 { /* Serial TS-out 2 */ + abilis,function = "mos2"; + }; + pctl_tsout_s3: pctl-tsout-s3 { /* Serial TS-out 3 */ + abilis,function = "mos3"; + }; + /* Port 7 */ + pctl_uart0: pctl-uart0 { /* UART 0 */ + abilis,function = "uart0"; + }; + pctl_uart1: pctl-uart1 { /* UART 1 */ + abilis,function = "uart1"; + }; + pctl_gpio_l: pctl-gpio-l { /* GPIO bank L */ + abilis,function = "gpiol"; + }; + pctl_gpio_m: pctl-gpio-m { /* GPIO bank M */ + abilis,function = "gpiom"; + }; + /* Port 8 */ + pctl_spi3: pctl-spi3 { + abilis,function = "spi3"; + }; + /* Port 9 */ + pctl_spi1: pctl-spi1 { + abilis,function = "spi1"; + }; + pctl_gpio_n: pctl-gpio-n { + abilis,function = "gpion"; + }; + /* Unmuxed GPIOs */ + pctl_gpio_b: pctl-gpio-b { + abilis,function = "gpiob"; + }; + pctl_gpio_d: pctl-gpio-d { + abilis,function = "gpiod"; + }; + pctl_gpio_f: pctl-gpio-f { + abilis,function = "gpiof"; + }; + pctl_gpio_h: pctl-gpio-h { + abilis,function = "gpioh"; + }; + pctl_gpio_i: pctl-gpio-i { + abilis,function = "gpioi"; + }; + }; + + gpioa: gpio@ff140000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff140000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <3>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioa"; + }; + gpiob: gpio@ff141000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff141000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <2>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiob"; + }; + gpioc: gpio@ff142000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff142000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <3>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioc"; + }; + gpiod: gpio@ff143000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff143000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <2>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiod"; + }; + gpioe: gpio@ff144000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff144000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <3>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioe"; + }; + gpiof: gpio@ff145000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff145000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <2>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiof"; + }; + gpiog: gpio@ff146000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff146000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <3>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiog"; + }; + gpioh: gpio@ff147000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff147000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <2>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioh"; + }; + gpioi: gpio@ff148000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff148000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <12>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioi"; + }; + gpioj: gpio@ff149000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff149000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <32>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioj"; + }; + gpiok: gpio@ff14a000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff14a000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <22>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiok"; + }; + gpiol: gpio@ff14b000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff14b000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <4>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiol"; + }; + gpiom: gpio@ff14c000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff14c000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <4>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiom"; + }; + gpion: gpio@ff14d000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff14d000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <5>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpion"; + }; + }; +}; diff --git a/arch/arc/boot/dts/abilis_tb100_dvk.dts b/arch/arc/boot/dts/abilis_tb100_dvk.dts new file mode 100644 index 0000000000..6d346de5e3 --- /dev/null +++ b/arch/arc/boot/dts/abilis_tb100_dvk.dts @@ -0,0 +1,116 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Abilis Systems TB100 Development Kit PCB device tree + * + * Copyright (C) Abilis Systems 2013 + * + * Author: Christian Ruppert <christian.ruppert@abilis.com> + */ + +/dts-v1/; + +/include/ "abilis_tb100.dtsi" + +/ { + model = "abilis,tb100"; + chosen { + bootargs = "earlycon=uart8250,mmio32,0xff100000,9600n8 console=ttyS0,9600n8"; + }; + + aliases { }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x08000000>; /* 128M */ + }; + + soc100 { + uart@ff100000 { + pinctrl-names = "default"; + pinctrl-0 = <&pctl_uart0>; + }; + ethernet@fe100000 { + phy-mode = "rgmii"; + }; + + i2c0: i2c@ff120000 { + i2c-sda-hold-time-ns = <432>; + }; + i2c1: i2c@ff121000 { + i2c-sda-hold-time-ns = <432>; + }; + i2c2: i2c@ff122000 { + i2c-sda-hold-time-ns = <432>; + }; + i2c3: i2c@ff123000 { + i2c-sda-hold-time-ns = <432>; + }; + i2c4: i2c@ff124000 { + i2c-sda-hold-time-ns = <432>; + }; + + leds { + compatible = "gpio-leds"; + power { + label = "Power"; + gpios = <&gpioi 0 0>; + linux,default-trigger = "default-on"; + }; + heartbeat { + label = "Heartbeat"; + gpios = <&gpioi 1 0>; + linux,default-trigger = "heartbeat"; + }; + led2 { + label = "LED2"; + gpios = <&gpioi 2 0>; + default-state = "off"; + }; + led3 { + label = "LED3"; + gpios = <&gpioi 3 0>; + default-state = "off"; + }; + led4 { + label = "LED4"; + gpios = <&gpioi 4 0>; + default-state = "off"; + }; + led5 { + label = "LED5"; + gpios = <&gpioi 5 0>; + default-state = "off"; + }; + led6 { + label = "LED6"; + gpios = <&gpioi 6 0>; + default-state = "off"; + }; + led7 { + label = "LED7"; + gpios = <&gpioi 7 0>; + default-state = "off"; + }; + led8 { + label = "LED8"; + gpios = <&gpioi 8 0>; + default-state = "off"; + }; + led9 { + label = "LED9"; + gpios = <&gpioi 9 0>; + default-state = "off"; + }; + led10 { + label = "LED10"; + gpios = <&gpioi 10 0>; + default-state = "off"; + }; + led11 { + label = "LED11"; + gpios = <&gpioi 11 0>; + default-state = "off"; + }; + }; + }; +}; diff --git a/arch/arc/boot/dts/abilis_tb101.dtsi b/arch/arc/boot/dts/abilis_tb101.dtsi new file mode 100644 index 0000000000..041ab1ba02 --- /dev/null +++ b/arch/arc/boot/dts/abilis_tb101.dtsi @@ -0,0 +1,345 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Abilis Systems TB101 SOC device tree + * + * Copyright (C) Abilis Systems 2013 + * + * Author: Christian Ruppert <christian.ruppert@abilis.com> + */ + +/include/ "abilis_tb10x.dtsi" + + +/ { + soc100 { + bus-frequency = <166666666>; + + pll0: oscillator { + clock-frequency = <1000000000>; + }; + cpu_clk: clkdiv_cpu { + clock-mult = <1>; + clock-div = <2>; + }; + ahb_clk: clkdiv_ahb { + clock-mult = <1>; + clock-div = <6>; + }; + + iomux: iomux@ff10601c { + /* Port 1 */ + pctl_tsin_s0: pctl-tsin-s0 { /* Serial TS-in 0 */ + abilis,function = "mis0"; + }; + pctl_tsin_s1: pctl-tsin-s1 { /* Serial TS-in 1 */ + abilis,function = "mis1"; + }; + pctl_gpio_a: pctl-gpio-a { /* GPIO bank A */ + abilis,function = "gpioa"; + }; + pctl_tsin_p1: pctl-tsin-p1 { /* Parallel TS-in 1 */ + abilis,function = "mip1"; + }; + /* Port 2 */ + pctl_tsin_s2: pctl-tsin-s2 { /* Serial TS-in 2 */ + abilis,function = "mis2"; + }; + pctl_tsin_s3: pctl-tsin-s3 { /* Serial TS-in 3 */ + abilis,function = "mis3"; + }; + pctl_gpio_c: pctl-gpio-c { /* GPIO bank C */ + abilis,function = "gpioc"; + }; + pctl_tsin_p3: pctl-tsin-p3 { /* Parallel TS-in 3 */ + abilis,function = "mip3"; + }; + /* Port 3 */ + pctl_tsin_s4: pctl-tsin-s4 { /* Serial TS-in 4 */ + abilis,function = "mis4"; + }; + pctl_tsin_s5: pctl-tsin-s5 { /* Serial TS-in 5 */ + abilis,function = "mis5"; + }; + pctl_gpio_e: pctl-gpio-e { /* GPIO bank E */ + abilis,function = "gpioe"; + }; + pctl_tsin_p5: pctl-tsin-p5 { /* Parallel TS-in 5 */ + abilis,function = "mip5"; + }; + /* Port 4 */ + pctl_tsin_s6: pctl-tsin-s6 { /* Serial TS-in 6 */ + abilis,function = "mis6"; + }; + pctl_tsin_s7: pctl-tsin-s7 { /* Serial TS-in 7 */ + abilis,function = "mis7"; + }; + pctl_gpio_g: pctl-gpio-g { /* GPIO bank G */ + abilis,function = "gpiog"; + }; + pctl_tsin_p7: pctl-tsin-p7 { /* Parallel TS-in 7 */ + abilis,function = "mip7"; + }; + /* Port 5 */ + pctl_gpio_j: pctl-gpio-j { /* GPIO bank J */ + abilis,function = "gpioj"; + }; + pctl_gpio_k: pctl-gpio-k { /* GPIO bank K */ + abilis,function = "gpiok"; + }; + pctl_ciplus: pctl-ciplus { /* CI+ interface */ + abilis,function = "ciplus"; + }; + pctl_mcard: pctl-mcard { /* M-Card interface */ + abilis,function = "mcard"; + }; + pctl_stc0: pctl-stc0 { /* Smart card I/F 0 */ + abilis,function = "stc0"; + }; + pctl_stc1: pctl-stc1 { /* Smart card I/F 1 */ + abilis,function = "stc1"; + }; + /* Port 6 */ + pctl_tsout_p: pctl-tsout-p { /* Parallel TS-out */ + abilis,function = "mop"; + }; + pctl_tsout_s0: pctl-tsout-s0 { /* Serial TS-out 0 */ + abilis,function = "mos0"; + }; + pctl_tsout_s1: pctl-tsout-s1 { /* Serial TS-out 1 */ + abilis,function = "mos1"; + }; + pctl_tsout_s2: pctl-tsout-s2 { /* Serial TS-out 2 */ + abilis,function = "mos2"; + }; + pctl_tsout_s3: pctl-tsout-s3 { /* Serial TS-out 3 */ + abilis,function = "mos3"; + }; + /* Port 7 */ + pctl_uart0: pctl-uart0 { /* UART 0 */ + abilis,function = "uart0"; + }; + pctl_uart1: pctl-uart1 { /* UART 1 */ + abilis,function = "uart1"; + }; + pctl_gpio_l: pctl-gpio-l { /* GPIO bank L */ + abilis,function = "gpiol"; + }; + pctl_gpio_m: pctl-gpio-m { /* GPIO bank M */ + abilis,function = "gpiom"; + }; + /* Port 8 */ + pctl_spi3: pctl-spi3 { + abilis,function = "spi3"; + }; + pctl_jtag: pctl-jtag { + abilis,function = "jtag"; + }; + /* Port 9 */ + pctl_spi1: pctl-spi1 { + abilis,function = "spi1"; + }; + pctl_gpio_n: pctl-gpio-n { + abilis,function = "gpion"; + }; + /* Unmuxed GPIOs */ + pctl_gpio_b: pctl-gpio-b { + abilis,function = "gpiob"; + }; + pctl_gpio_d: pctl-gpio-d { + abilis,function = "gpiod"; + }; + pctl_gpio_f: pctl-gpio-f { + abilis,function = "gpiof"; + }; + pctl_gpio_h: pctl-gpio-h { + abilis,function = "gpioh"; + }; + pctl_gpio_i: pctl-gpio-i { + abilis,function = "gpioi"; + }; + }; + + gpioa: gpio@ff140000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff140000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <3>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioa"; + }; + gpiob: gpio@ff141000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff141000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <2>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiob"; + }; + gpioc: gpio@ff142000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff142000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <3>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioc"; + }; + gpiod: gpio@ff143000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff143000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <2>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiod"; + }; + gpioe: gpio@ff144000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff144000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <3>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioe"; + }; + gpiof: gpio@ff145000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff145000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <2>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiof"; + }; + gpiog: gpio@ff146000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff146000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <3>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiog"; + }; + gpioh: gpio@ff147000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff147000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <2>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioh"; + }; + gpioi: gpio@ff148000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff148000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <12>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioi"; + }; + gpioj: gpio@ff149000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff149000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <32>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioj"; + }; + gpiok: gpio@ff14a000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff14a000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <22>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiok"; + }; + gpiol: gpio@ff14b000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff14b000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <4>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiol"; + }; + gpiom: gpio@ff14c000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff14c000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <4>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiom"; + }; + gpion: gpio@ff14d000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff14d000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <5>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpion"; + }; + }; +}; diff --git a/arch/arc/boot/dts/abilis_tb101_dvk.dts b/arch/arc/boot/dts/abilis_tb101_dvk.dts new file mode 100644 index 0000000000..d11b790f8b --- /dev/null +++ b/arch/arc/boot/dts/abilis_tb101_dvk.dts @@ -0,0 +1,116 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Abilis Systems TB101 Development Kit PCB device tree + * + * Copyright (C) Abilis Systems 2013 + * + * Author: Christian Ruppert <christian.ruppert@abilis.com> + */ + +/dts-v1/; + +/include/ "abilis_tb101.dtsi" + +/ { + model = "abilis,tb101"; + chosen { + bootargs = "earlycon=uart8250,mmio32,0xff100000,9600n8 console=ttyS0,9600n8"; + }; + + aliases { }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x08000000>; /* 128M */ + }; + + soc100 { + uart@ff100000 { + pinctrl-names = "default"; + pinctrl-0 = <&pctl_uart0>; + }; + ethernet@fe100000 { + phy-mode = "rgmii"; + }; + + i2c0: i2c@ff120000 { + i2c-sda-hold-time-ns = <432>; + }; + i2c1: i2c@ff121000 { + i2c-sda-hold-time-ns = <432>; + }; + i2c2: i2c@ff122000 { + i2c-sda-hold-time-ns = <432>; + }; + i2c3: i2c@ff123000 { + i2c-sda-hold-time-ns = <432>; + }; + i2c4: i2c@ff124000 { + i2c-sda-hold-time-ns = <432>; + }; + + leds { + compatible = "gpio-leds"; + power { + label = "Power"; + gpios = <&gpioi 0 0>; + linux,default-trigger = "default-on"; + }; + heartbeat { + label = "Heartbeat"; + gpios = <&gpioi 1 0>; + linux,default-trigger = "heartbeat"; + }; + led2 { + label = "LED2"; + gpios = <&gpioi 2 0>; + default-state = "off"; + }; + led3 { + label = "LED3"; + gpios = <&gpioi 3 0>; + default-state = "off"; + }; + led4 { + label = "LED4"; + gpios = <&gpioi 4 0>; + default-state = "off"; + }; + led5 { + label = "LED5"; + gpios = <&gpioi 5 0>; + default-state = "off"; + }; + led6 { + label = "LED6"; + gpios = <&gpioi 6 0>; + default-state = "off"; + }; + led7 { + label = "LED7"; + gpios = <&gpioi 7 0>; + default-state = "off"; + }; + led8 { + label = "LED8"; + gpios = <&gpioi 8 0>; + default-state = "off"; + }; + led9 { + label = "LED9"; + gpios = <&gpioi 9 0>; + default-state = "off"; + }; + led10 { + label = "LED10"; + gpios = <&gpioi 10 0>; + default-state = "off"; + }; + led11 { + label = "LED11"; + gpios = <&gpioi 11 0>; + default-state = "off"; + }; + }; + }; +}; diff --git a/arch/arc/boot/dts/abilis_tb10x.dtsi b/arch/arc/boot/dts/abilis_tb10x.dtsi new file mode 100644 index 0000000000..aa62619f21 --- /dev/null +++ b/arch/arc/boot/dts/abilis_tb10x.dtsi @@ -0,0 +1,243 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Abilis Systems TB10X SOC device tree + * + * Copyright (C) Abilis Systems 2013 + * + * Author: Christian Ruppert <christian.ruppert@abilis.com> + */ + + +/ { + compatible = "abilis,arc-tb10x"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; + compatible = "snps,arc770d"; + reg = <0>; + }; + }; + + /* TIMER0 with interrupt for clockevent */ + timer0 { + compatible = "snps,arc-timer"; + interrupts = <3>; + interrupt-parent = <&intc>; + clocks = <&cpu_clk>; + }; + + /* TIMER1 for free running clocksource */ + timer1 { + compatible = "snps,arc-timer"; + clocks = <&cpu_clk>; + }; + + soc100 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0xfe000000 0xfe000000 0x02000000 + 0x000f0000 0x000f0000 0x00010000>; + compatible = "abilis,tb10x", "simple-bus"; + + pll0: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "pll0"; + }; + cpu_clk: clkdiv_cpu { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&pll0>; + clock-output-names = "cpu_clk"; + }; + ahb_clk: clkdiv_ahb { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&pll0>; + clock-output-names = "ahb_clk"; + }; + + iomux: iomux@ff10601c { + compatible = "abilis,tb10x-iomux"; + #gpio-range-cells = <3>; + reg = <0xff10601c 0x4>; + }; + + intc: interrupt-controller { + compatible = "snps,arc700-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + tb10x_ictl: pic@fe002000 { + compatible = "abilis,tb10x-ictl"; + reg = <0xfe002000 0x20>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupts = <5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 30 31>; + }; + + uart@ff100000 { + compatible = "snps,dw-apb-uart"; + reg = <0xff100000 0x100>; + clock-frequency = <166666666>; + interrupts = <25 8>; + reg-shift = <2>; + reg-io-width = <4>; + interrupt-parent = <&tb10x_ictl>; + }; + ethernet@fe100000 { + compatible = "snps,dwmac-3.70a","snps,dwmac"; + reg = <0xfe100000 0x1058>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <6 8>; + interrupt-names = "macirq"; + clocks = <&ahb_clk>; + clock-names = "stmmaceth"; + }; + dma@fe000000 { + compatible = "snps,dma-spear1340"; + reg = <0xfe000000 0x400>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <14 8>; + dma-channels = <6>; + dma-requests = <0>; + dma-masters = <1>; + #dma-cells = <3>; + chan_allocation_order = <0>; + chan_priority = <1>; + block_size = <0x7ff>; + data-width = <4>; + clocks = <&ahb_clk>; + clock-names = "hclk"; + multi-block = <1 1 1 1 1 1>; + }; + + i2c0: i2c@ff120000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xff120000 0x1000>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <12 8>; + clocks = <&ahb_clk>; + }; + i2c1: i2c@ff121000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xff121000 0x1000>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <12 8>; + clocks = <&ahb_clk>; + }; + i2c2: i2c@ff122000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xff122000 0x1000>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <12 8>; + clocks = <&ahb_clk>; + }; + i2c3: i2c@ff123000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xff123000 0x1000>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <12 8>; + clocks = <&ahb_clk>; + }; + i2c4: i2c@ff124000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xff124000 0x1000>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <12 8>; + clocks = <&ahb_clk>; + }; + + spi0: spi@fe010000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "abilis,tb100-spi"; + num-cs = <1>; + reg = <0xfe010000 0x20>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <26 8>; + clocks = <&ahb_clk>; + }; + spi1: spi@fe011000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "abilis,tb100-spi"; + num-cs = <2>; + reg = <0xfe011000 0x20>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <10 8>; + clocks = <&ahb_clk>; + }; + + tb10x_tsm: tb10x-tsm@ff316000 { + compatible = "abilis,tb100-tsm"; + reg = <0xff316000 0x400>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <17 8>; + output-clkdiv = <4>; + global-packet-delay = <0x21>; + port-packet-delay = <0>; + }; + tb10x_stream_proc: tb10x-stream-proc { + compatible = "abilis,tb100-streamproc"; + reg = <0xfff00000 0x200>, + <0x000f0000 0x10000>, + <0xfff00200 0x105>, + <0xff10600c 0x1>, + <0xfe001018 0x1>; + reg-names = "mbox", + "sp_iccm", + "mbox_irq", + "cpuctrl", + "a6it_int_force"; + interrupt-parent = <&tb10x_ictl>; + interrupts = <20 2>, <19 2>; + interrupt-names = "cmd_irq", "event_irq"; + }; + tb10x_mdsc0: tb10x-mdscr@ff300000 { + compatible = "abilis,tb100-mdscr"; + reg = <0xff300000 0x7000>; + tb100-mdscr-manage-tsin; + }; + tb10x_mscr0: tb10x-mdscr@ff307000 { + compatible = "abilis,tb100-mdscr"; + reg = <0xff307000 0x7000>; + }; + tb10x_scr0: tb10x-mdscr@ff30e000 { + compatible = "abilis,tb100-mdscr"; + reg = <0xff30e000 0x4000>; + tb100-mdscr-manage-tsin; + }; + tb10x_scr1: tb10x-mdscr@ff312000 { + compatible = "abilis,tb100-mdscr"; + reg = <0xff312000 0x4000>; + tb100-mdscr-manage-tsin; + }; + tb10x_wfb: tb10x-wfb@ff319000 { + compatible = "abilis,tb100-wfb"; + reg = <0xff319000 0x1000>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <16 8>; + }; + }; +}; diff --git a/arch/arc/boot/dts/axc001.dtsi b/arch/arc/boot/dts/axc001.dtsi new file mode 100644 index 0000000000..2a151607b0 --- /dev/null +++ b/arch/arc/boot/dts/axc001.dtsi @@ -0,0 +1,126 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com) + */ + +/* + * Device tree for AXC001 770D/EM6/AS221 CPU card + * Note that this file only supports the 770D CPU + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "snps,arc"; + #address-cells = <2>; + #size-cells = <2>; + + cpu_card { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x00000000 0x0 0xf0000000 0x10000000>; + + core_clk: core_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <750000000>; + }; + + input_clk: input-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <33333333>; + }; + + core_intc: arc700-intc@cpu { + compatible = "snps,arc700-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + /* + * this GPIO block ORs all interrupts on CPU card (creg,..) + * to uplink only 1 IRQ to ARC core intc + */ + dw-apb-gpio@2000 { + compatible = "snps,dw-apb-gpio"; + reg = < 0x2000 0x80 >; + #address-cells = <1>; + #size-cells = <0>; + + ictl_intc: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <30>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&core_intc>; + interrupts = <15>; + }; + }; + + debug_uart: dw-apb-uart@5000 { + compatible = "snps,dw-apb-uart"; + reg = <0x5000 0x100>; + clock-frequency = <33333000>; + interrupt-parent = <&ictl_intc>; + interrupts = <19 4>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + arcpct0: pct { + compatible = "snps,arc700-pct"; + }; + }; + + /* + * This INTC is actually connected to DW APB GPIO + * which acts as a wire between MB INTC and CPU INTC. + * GPIO INTC is configured in platform init code + * and here we mimic direct connection from MB INTC to + * CPU INTC, thus we set "interrupts = <7>" instead of + * "interrupts = <12>" + * + * This intc actually resides on MB, but we move it here to + * avoid duplicating the MB dtsi file given that IRQ from + * this intc to cpu intc are different for axs101 and axs103 + */ + mb_intc: interrupt-controller@e0012000 { + #interrupt-cells = <1>; + compatible = "snps,dw-apb-ictl"; + reg = < 0x0 0xe0012000 0x0 0x200 >; + interrupt-controller; + interrupt-parent = <&core_intc>; + interrupts = < 7 >; + }; + + memory { + device_type = "memory"; + /* CONFIG_LINUX_RAM_BASE needs to match low mem start */ + reg = <0x0 0x80000000 0x0 0x1b000000>; /* (512 - 32) MiB */ + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + /* + * We just move frame buffer area to the very end of + * available DDR. And even though in case of ARC770 there's + * no strict requirement for a frame-buffer to be in any + * particular location it allows us to use the same + * base board's DT node for ARC PGU as for ARc HS38. + */ + frame_buffer: frame_buffer@9e000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x9e000000 0x0 0x2000000>; + no-map; + }; + }; +}; diff --git a/arch/arc/boot/dts/axc003.dtsi b/arch/arc/boot/dts/axc003.dtsi new file mode 100644 index 0000000000..3434c8131e --- /dev/null +++ b/arch/arc/boot/dts/axc003.dtsi @@ -0,0 +1,161 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) + */ + +/* + * Device tree for AXC003 CPU card: HS38x UP configuration + */ + +/include/ "skeleton_hs.dtsi" + +/ { + compatible = "snps,arc"; + #address-cells = <2>; + #size-cells = <2>; + + cpu_card { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x00000000 0x0 0xf0000000 0x10000000>; + + input_clk: input-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <33333333>; + }; + + core_clk: core-clk@80 { + compatible = "snps,axs10x-arc-pll-clock"; + reg = <0x80 0x10>, <0x100 0x10>; + #clock-cells = <0>; + clocks = <&input_clk>; + + /* + * Set initial core pll output frequency to 90MHz. + * It will be applied at the core pll driver probing + * on early boot. + */ + assigned-clocks = <&core_clk>; + assigned-clock-rates = <90000000>; + }; + + core_intc: archs-intc@cpu { + compatible = "snps,archs-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + /* + * this GPIO block ORs all interrupts on CPU card (creg,..) + * to uplink only 1 IRQ to ARC core intc + */ + dw-apb-gpio@2000 { + compatible = "snps,dw-apb-gpio"; + reg = < 0x2000 0x80 >; + #address-cells = <1>; + #size-cells = <0>; + + ictl_intc: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <30>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&core_intc>; + interrupts = <25>; + }; + }; + + debug_uart: dw-apb-uart@5000 { + compatible = "snps,dw-apb-uart"; + reg = <0x5000 0x100>; + clock-frequency = <33333000>; + interrupt-parent = <&ictl_intc>; + interrupts = <2 4>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + arcpct0: pct { + compatible = "snps,archs-pct"; + #interrupt-cells = <1>; + interrupt-parent = <&core_intc>; + interrupts = <20>; + }; + }; + + /* + * Mark DMA peripherals connected via IOC port as dma-coherent. We do + * it via overlay because peripherals defined in axs10x_mb.dtsi are + * used for both AXS101 and AXS103 boards and only AXS103 has IOC (so + * only AXS103 board has HW-coherent DMA peripherals) + * We don't need to mark pgu@17000 as dma-coherent because it uses + * external DMA buffer located outside of IOC aperture. + */ + axs10x_mb { + ethernet@18000 { + dma-coherent; + }; + + usb@40000 { + dma-coherent; + }; + + usb@60000 { + dma-coherent; + }; + + mmc@15000 { + dma-coherent; + }; + }; + + /* + * The DW APB ICTL intc on MB is connected to CPU intc via a + * DT "invisible" DW APB GPIO block, configured to simply pass thru + * interrupts - setup accordinly in platform init (plat-axs10x/ax10x.c) + * + * So here we mimic a direct connection betwen them, ignoring the + * ABPG GPIO. Thus set "interrupts = <24>" (DW APB GPIO to core) + * instead of "interrupts = <12>" (DW APB ICTL to DW APB GPIO) + * + * This intc actually resides on MB, but we move it here to + * avoid duplicating the MB dtsi file given that IRQ from + * this intc to cpu intc are different for axs101 and axs103 + */ + mb_intc: interrupt-controller@e0012000 { + #interrupt-cells = <1>; + compatible = "snps,dw-apb-ictl"; + reg = < 0x0 0xe0012000 0x0 0x200 >; + interrupt-controller; + interrupt-parent = <&core_intc>; + interrupts = < 24 >; + }; + + memory { + device_type = "memory"; + /* CONFIG_LINUX_RAM_BASE needs to match low mem start */ + reg = <0x0 0x80000000 0x0 0x20000000 /* 512 MiB low mem */ + 0x1 0xc0000000 0x0 0x40000000>; /* 1 GiB highmem */ + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + /* + * Move frame buffer out of IOC aperture (0x8z-0xaz). + */ + frame_buffer: frame_buffer@be000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0xbe000000 0x0 0x2000000>; + no-map; + }; + }; +}; diff --git a/arch/arc/boot/dts/axc003_idu.dtsi b/arch/arc/boot/dts/axc003_idu.dtsi new file mode 100644 index 0000000000..67556f4b70 --- /dev/null +++ b/arch/arc/boot/dts/axc003_idu.dtsi @@ -0,0 +1,167 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2014, 2015 Synopsys, Inc. (www.synopsys.com) + */ + +/* + * Device tree for AXC003 CPU card: HS38x2 (Dual Core) with IDU intc + */ + +/include/ "skeleton_hs_idu.dtsi" + +/ { + compatible = "snps,arc"; + #address-cells = <2>; + #size-cells = <2>; + + cpu_card { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x00000000 0x0 0xf0000000 0x10000000>; + + input_clk: input-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <33333333>; + }; + + core_clk: core-clk@80 { + compatible = "snps,axs10x-arc-pll-clock"; + reg = <0x80 0x10>, <0x100 0x10>; + #clock-cells = <0>; + clocks = <&input_clk>; + + /* + * Set initial core pll output frequency to 100MHz. + * It will be applied at the core pll driver probing + * on early boot. + */ + assigned-clocks = <&core_clk>; + assigned-clock-rates = <100000000>; + }; + + core_intc: archs-intc@cpu { + compatible = "snps,archs-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + idu_intc: idu-interrupt-controller { + compatible = "snps,archs-idu-intc"; + interrupt-controller; + interrupt-parent = <&core_intc>; + #interrupt-cells = <1>; + }; + + /* + * this GPIO block ORs all interrupts on CPU card (creg,..) + * to uplink only 1 IRQ to ARC core intc + */ + dw-apb-gpio@2000 { + compatible = "snps,dw-apb-gpio"; + reg = < 0x2000 0x80 >; + #address-cells = <1>; + #size-cells = <0>; + + ictl_intc: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <30>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&idu_intc>; + interrupts = <1>; + }; + }; + + debug_uart: dw-apb-uart@5000 { + compatible = "snps,dw-apb-uart"; + reg = <0x5000 0x100>; + clock-frequency = <33333000>; + interrupt-parent = <&ictl_intc>; + interrupts = <2 4>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + arcpct0: pct { + compatible = "snps,archs-pct"; + #interrupt-cells = <1>; + interrupt-parent = <&core_intc>; + interrupts = <20>; + }; + }; + + /* + * Mark DMA peripherals connected via IOC port as dma-coherent. We do + * it via overlay because peripherals defined in axs10x_mb.dtsi are + * used for both AXS101 and AXS103 boards and only AXS103 has IOC (so + * only AXS103 board has HW-coherent DMA peripherals) + * We don't need to mark pgu@17000 as dma-coherent because it uses + * external DMA buffer located outside of IOC aperture. + */ + axs10x_mb { + ethernet@18000 { + dma-coherent; + }; + + usb@40000 { + dma-coherent; + }; + + usb@60000 { + dma-coherent; + }; + + mmc@15000 { + dma-coherent; + }; + }; + + /* + * This INTC is actually connected to DW APB GPIO + * which acts as a wire between MB INTC and CPU INTC. + * GPIO INTC is configured in platform init code + * and here we mimic direct connection from MB INTC to + * CPU INTC, thus we set "interrupts = <0 1>" instead of + * "interrupts = <12>" + * + * This intc actually resides on MB, but we move it here to + * avoid duplicating the MB dtsi file given that IRQ from + * this intc to cpu intc are different for axs101 and axs103 + */ + mb_intc: interrupt-controller@e0012000 { + #interrupt-cells = <1>; + compatible = "snps,dw-apb-ictl"; + reg = < 0x0 0xe0012000 0x0 0x200 >; + interrupt-controller; + interrupt-parent = <&idu_intc>; + interrupts = <0>; + }; + + memory { + device_type = "memory"; + /* CONFIG_LINUX_RAM_BASE needs to match low mem start */ + reg = <0x0 0x80000000 0x0 0x20000000 /* 512 MiB low mem */ + 0x1 0xc0000000 0x0 0x40000000>; /* 1 GiB highmem */ + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + /* + * Move frame buffer out of IOC aperture (0x8z-0xaz). + */ + frame_buffer: frame_buffer@be000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0xbe000000 0x0 0x2000000>; + no-map; + }; + }; +}; diff --git a/arch/arc/boot/dts/axs101.dts b/arch/arc/boot/dts/axs101.dts new file mode 100644 index 0000000000..c4cfc5f4f4 --- /dev/null +++ b/arch/arc/boot/dts/axs101.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com) + * + * ARC AXS101 S/W development platform + */ +/dts-v1/; + +/include/ "axc001.dtsi" +/include/ "axs10x_mb.dtsi" + +/ { + model = "snps,axs101"; + compatible = "snps,axs101", "snps,arc-sdp"; + + chosen { + bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0 print-fatal-signals=1"; + }; +}; diff --git a/arch/arc/boot/dts/axs103.dts b/arch/arc/boot/dts/axs103.dts new file mode 100644 index 0000000000..16ccb7ba7a --- /dev/null +++ b/arch/arc/boot/dts/axs103.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) + */ + +/* + * Device Tree for AXS103 SDP with AXS10X Main Board and + * AXC003 FPGA Card (with UP bitfile) + */ +/dts-v1/; + +/include/ "axc003.dtsi" +/include/ "axs10x_mb.dtsi" + +/ { + model = "snps,axs103"; + compatible = "snps,axs103", "snps,arc-sdp"; + + chosen { + bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=ttyS3,115200n8 debug print-fatal-signals=1"; + }; +}; diff --git a/arch/arc/boot/dts/axs103_idu.dts b/arch/arc/boot/dts/axs103_idu.dts new file mode 100644 index 0000000000..a934b92a8c --- /dev/null +++ b/arch/arc/boot/dts/axs103_idu.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) + */ + +/* + * Device Tree for AXS103 SDP with AXS10X Main Board and + * AXC003 FPGA Card (with SMP bitfile) + */ +/dts-v1/; + +/include/ "axc003_idu.dtsi" +/include/ "axs10x_mb.dtsi" + +/ { + model = "snps,axs103-smp"; + compatible = "snps,axs103", "snps,arc-sdp"; + + chosen { + bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 print-fatal-signals=1 consoleblank=0"; + }; +}; diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi new file mode 100644 index 0000000000..b644353853 --- /dev/null +++ b/arch/arc/boot/dts/axs10x_mb.dtsi @@ -0,0 +1,330 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Support for peripherals on the AXS10x mainboard + * + * Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com) + */ + +/ { + aliases { + ethernet = &gmac; + }; + + axs10x_mb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x0 0xe0000000 0x10000000>; + interrupt-parent = <&mb_intc>; + + creg_rst: reset-controller@11220 { + compatible = "snps,axs10x-reset"; + #reset-cells = <1>; + reg = <0x11220 0x4>; + }; + + i2sclk: i2sclk@100a0 { + compatible = "snps,axs10x-i2s-pll-clock"; + reg = <0x100a0 0x10>; + clocks = <&i2spll_clk>; + #clock-cells = <0>; + }; + + clocks { + i2spll_clk: i2spll_clk { + compatible = "fixed-clock"; + clock-frequency = <27000000>; + #clock-cells = <0>; + }; + + i2cclk: i2cclk { + compatible = "fixed-clock"; + clock-frequency = <50000000>; + #clock-cells = <0>; + }; + + apbclk: apbclk { + compatible = "fixed-clock"; + clock-frequency = <50000000>; + #clock-cells = <0>; + }; + + mmcclk: mmcclk { + compatible = "fixed-clock"; + /* + * DW sdio controller has external ciu clock divider + * controlled via register in SDIO IP. It divides + * sdio_ref_clk (which comes from CGU) by 16 for + * default. So default mmcclk clock (which comes + * to sdk_in) is 25000000 Hz. + */ + clock-frequency = <25000000>; + #clock-cells = <0>; + }; + }; + + pguclk: pguclk@10080 { + compatible = "snps,axs10x-pgu-pll-clock"; + reg = <0x10080 0x10>, <0x110 0x10>; + #clock-cells = <0>; + clocks = <&input_clk>; + }; + + gmac: ethernet@18000 { + #interrupt-cells = <1>; + compatible = "snps,dwmac"; + reg = < 0x18000 0x2000 >; + interrupts = < 4 >; + interrupt-names = "macirq"; + phy-mode = "rgmii"; + snps,pbl = < 32 >; + snps,multicast-filter-bins = <256>; + clocks = <&apbclk>; + clock-names = "stmmaceth"; + max-speed = <100>; + resets = <&creg_rst 5>; + reset-names = "stmmaceth"; + mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */ + }; + + usb@40000 { + compatible = "generic-ehci"; + reg = < 0x40000 0x100 >; + interrupts = < 8 >; + }; + + usb@60000 { + compatible = "generic-ohci"; + reg = < 0x60000 0x100 >; + interrupts = < 8 >; + }; + + /* + * According to DW Mobile Storage databook it is required + * to use "Hold Register" if card is enumerated in SDR12 or + * SDR25 modes. + * + * Utilization of "Hold Register" is already implemented via + * dw_mci_pltfm_prepare_command() which in its turn gets + * used through dw_mci_drv_data->prepare_command call-back. + * This call-back is used in Altera Socfpga platform and so + * we may reuse it saying that we're compatible with their + * "altr,socfpga-dw-mshc". + * + * Most probably "Hold Register" utilization is platform- + * independent requirement which means that single unified + * "snps,dw-mshc" should be enough for all users of DW MMC once + * dw_mci_pltfm_prepare_command() is used in generic platform + * code. + */ + mmc@15000 { + compatible = "altr,socfpga-dw-mshc"; + reg = < 0x15000 0x400 >; + fifo-depth = < 16 >; + card-detect-delay = < 200 >; + clocks = <&apbclk>, <&mmcclk>; + clock-names = "biu", "ciu"; + interrupts = < 7 >; + bus-width = < 4 >; + }; + + uart@20000 { + compatible = "snps,dw-apb-uart"; + reg = <0x20000 0x100>; + clock-frequency = <33333333>; + interrupts = <17>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + uart@21000 { + compatible = "snps,dw-apb-uart"; + reg = <0x21000 0x100>; + clock-frequency = <33333333>; + interrupts = <18>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + /* UART muxed with USB data port (ttyS3) */ + uart@22000 { + compatible = "snps,dw-apb-uart"; + reg = <0x22000 0x100>; + clock-frequency = <33333333>; + interrupts = <19>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + i2c@1d000 { + compatible = "snps,designware-i2c"; + reg = <0x1d000 0x100>; + clock-frequency = <400000>; + clocks = <&i2cclk>; + interrupts = <14>; + }; + + i2s: i2s@1e000 { + compatible = "snps,designware-i2s"; + reg = <0x1e000 0x100>; + clocks = <&i2sclk 0>; + clock-names = "i2sclk"; + interrupts = <15>; + #sound-dai-cells = <0>; + }; + + i2c@1f000 { + compatible = "snps,designware-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1f000 0x100>; + clock-frequency = <400000>; + clocks = <&i2cclk>; + interrupts = <16>; + + adv7511:adv7511@39{ + compatible="adi,adv7511"; + reg = <0x39>; + interrupts = <23>; + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,clock-delay = <0x03>; + #sound-dai-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* RGB/YUV input */ + port@0 { + reg = <0>; + adv7511_input:endpoint { + remote-endpoint = <&pgu_output>; + }; + }; + + /* HDMI output */ + port@1 { + reg = <1>; + adv7511_output: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; + + eeprom@54{ + compatible = "atmel,24c01"; + reg = <0x54>; + pagesize = <0x8>; + }; + + eeprom@57{ + compatible = "atmel,24c04"; + reg = <0x57>; + pagesize = <0x8>; + }; + }; + + hdmi0: connector { + compatible = "hdmi-connector"; + type = "a"; + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&adv7511_output>; + }; + }; + }; + + gpio0:gpio@13000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x13000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + gpio0_banka: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + }; + + gpio0_bankb: gpio-controller@1 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <1>; + }; + + gpio0_bankc: gpio-controller@2 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <2>; + }; + }; + + gpio1:gpio@14000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x14000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + gpio1_banka: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <30>; + reg = <0>; + }; + + gpio1_bankb: gpio-controller@1 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <10>; + reg = <1>; + }; + + gpio1_bankc: gpio-controller@2 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <2>; + }; + }; + + pgu@17000 { + compatible = "snps,arcpgu"; + reg = <0x17000 0x400>; + clocks = <&pguclk>; + clock-names = "pxlclk"; + memory-region = <&frame_buffer>; + port { + pgu_output: endpoint { + remote-endpoint = <&adv7511_input>; + }; + }; + }; + + sound_playback { + compatible = "simple-audio-card"; + simple-audio-card,name = "AXS10x HDMI Audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,cpu { + sound-dai = <&i2s>; + }; + simple-audio-card,codec { + sound-dai = <&adv7511>; + }; + }; + }; +}; diff --git a/arch/arc/boot/dts/haps_hs.dts b/arch/arc/boot/dts/haps_hs.dts new file mode 100644 index 0000000000..76ad527a08 --- /dev/null +++ b/arch/arc/boot/dts/haps_hs.dts @@ -0,0 +1,99 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2016-2014 Synopsys, Inc. (www.synopsys.com) + */ +/dts-v1/; + +/include/ "skeleton_hs.dtsi" + +/ { + model = "snps,zebu_hs"; + compatible = "snps,zebu_hs"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&core_intc>; + + memory { + device_type = "memory"; + /* CONFIG_LINUX_RAM_BASE needs to match low mem start */ + reg = <0x0 0x80000000 0x0 0x40000000 /* 1 GB low mem */ + 0x1 0x00000000 0x0 0x40000000>; /* 1 GB highmem */ + }; + + chosen { + bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1"; + }; + + aliases { + serial0 = &uart0; + }; + + fpga { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + /* only perip space at end of low mem accessible + bus addr, parent bus addr, size */ + ranges = <0x80000000 0x0 0x80000000 0x80000000>; + + core_clk: core_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; + + core_intc: interrupt-controller { + compatible = "snps,archs-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + uart0: serial@f0000000 { + compatible = "ns16550a"; + reg = <0xf0000000 0x2000>; + interrupts = <24>; + clock-frequency = <50000000>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + no-loopback-test = <1>; + }; + + arcpct0: pct { + compatible = "snps,archs-pct"; + #interrupt-cells = <1>; + interrupts = <20>; + }; + + virtio0: virtio@f0100000 { + compatible = "virtio,mmio"; + reg = <0xf0100000 0x2000>; + interrupts = <31>; + }; + + virtio1: virtio@f0102000 { + compatible = "virtio,mmio"; + reg = <0xf0102000 0x2000>; + interrupts = <32>; + }; + + virtio2: virtio@f0104000 { + compatible = "virtio,mmio"; + reg = <0xf0104000 0x2000>; + interrupts = <33>; + }; + + virtio3: virtio@f0106000 { + compatible = "virtio,mmio"; + reg = <0xf0106000 0x2000>; + interrupts = <34>; + }; + + virtio4: virtio@f0108000 { + compatible = "virtio,mmio"; + reg = <0xf0108000 0x2000>; + interrupts = <35>; + }; + }; +}; diff --git a/arch/arc/boot/dts/haps_hs_idu.dts b/arch/arc/boot/dts/haps_hs_idu.dts new file mode 100644 index 0000000000..738c76cd07 --- /dev/null +++ b/arch/arc/boot/dts/haps_hs_idu.dts @@ -0,0 +1,74 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2016-2014 Synopsys, Inc. (www.synopsys.com) + */ +/dts-v1/; + +/include/ "skeleton_hs_idu.dtsi" + +/ { + model = "snps,zebu_hs-smp"; + compatible = "snps,zebu_hs"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&core_intc>; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 */ + }; + + chosen { + bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1"; + }; + + aliases { + serial0 = &uart0; + }; + + fpga { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + /* child and parent address space 1:1 mapped */ + ranges; + + core_clk: core_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; /* 50 MHZ */ + }; + + core_intc: interrupt-controller { + compatible = "snps,archs-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + idu_intc: idu-interrupt-controller { + compatible = "snps,archs-idu-intc"; + interrupt-controller; + interrupt-parent = <&core_intc>; + #interrupt-cells = <1>; + }; + + uart0: serial@f0000000 { + compatible = "ns16550a"; + reg = <0xf0000000 0x2000>; + interrupt-parent = <&idu_intc>; + interrupts = <0>; + clock-frequency = <50000000>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + no-loopback-test = <1>; + }; + + arcpct0: pct { + compatible = "snps,archs-pct"; + #interrupt-cells = <1>; + interrupts = <20>; + }; + }; +}; diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts new file mode 100644 index 0000000000..6691f42550 --- /dev/null +++ b/arch/arc/boot/dts/hsdk.dts @@ -0,0 +1,351 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2017 Synopsys, Inc. (www.synopsys.com) + */ + +/* + * Device Tree for ARC HS Development Kit + */ +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/reset/snps,hsdk-reset.h> + +/ { + model = "snps,hsdk"; + compatible = "snps,hsdk"; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { + bootargs = "earlycon=uart8250,mmio32,0xf0005000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1"; + }; + + aliases { + ethernet = &gmac; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "snps,archs38"; + reg = <0>; + clocks = <&core_clk>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "snps,archs38"; + reg = <1>; + clocks = <&core_clk>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "snps,archs38"; + reg = <2>; + clocks = <&core_clk>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "snps,archs38"; + reg = <3>; + clocks = <&core_clk>; + }; + }; + + input_clk: input-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <33333333>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + + regulator-name = "5v0-supply"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + cpu_intc: cpu-interrupt-controller { + compatible = "snps,archs-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + idu_intc: idu-interrupt-controller { + compatible = "snps,archs-idu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&cpu_intc>; + }; + + arcpct: pct { + compatible = "snps,archs-pct"; + interrupt-parent = <&cpu_intc>; + interrupts = <20>; + }; + + /* TIMER0 with interrupt for clockevent */ + timer { + compatible = "snps,arc-timer"; + interrupts = <16>; + interrupt-parent = <&cpu_intc>; + clocks = <&core_clk>; + }; + + /* 64-bit Global Free Running Counter */ + gfrc { + compatible = "snps,archs-timer-gfrc"; + clocks = <&core_clk>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&idu_intc>; + + ranges = <0x00000000 0x0 0xf0000000 0x10000000>; + + cgu_rst: reset-controller@8a0 { + compatible = "snps,hsdk-reset"; + #reset-cells = <1>; + reg = <0x8a0 0x4>, <0xff0 0x4>; + }; + + core_clk: core-clk@0 { + compatible = "snps,hsdk-core-pll-clock"; + reg = <0x00 0x10>, <0x14b8 0x4>; + #clock-cells = <0>; + clocks = <&input_clk>; + + /* + * Set initial core pll output frequency to 1GHz. + * It will be applied at the core pll driver probing + * on early boot. + */ + assigned-clocks = <&core_clk>; + assigned-clock-rates = <1000000000>; + }; + + serial: serial@5000 { + compatible = "snps,dw-apb-uart"; + reg = <0x5000 0x100>; + clock-frequency = <33330000>; + interrupts = <6>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + gmacclk: gmacclk { + compatible = "fixed-clock"; + clock-frequency = <400000000>; + #clock-cells = <0>; + }; + + mmcclk_ciu: mmcclk-ciu { + compatible = "fixed-clock"; + /* + * DW sdio controller has external ciu clock divider + * controlled via register in SDIO IP. Due to its + * unexpected default value (it should divide by 1 + * but it divides by 8) SDIO IP uses wrong clock and + * works unstable (see STAR 9001204800) + * We switched to the minimum possible value of the + * divisor (div-by-2) in HSDK platform code. + * So add temporary fix and change clock frequency + * to 50000000 Hz until we fix dw sdio driver itself. + */ + clock-frequency = <50000000>; + #clock-cells = <0>; + }; + + mmcclk_biu: mmcclk-biu { + compatible = "fixed-clock"; + clock-frequency = <400000000>; + #clock-cells = <0>; + }; + + gpu_core_clk: gpu-core-clk { + compatible = "fixed-clock"; + clock-frequency = <400000000>; + #clock-cells = <0>; + }; + + gpu_dma_clk: gpu-dma-clk { + compatible = "fixed-clock"; + clock-frequency = <400000000>; + #clock-cells = <0>; + }; + + gpu_cfg_clk: gpu-cfg-clk { + compatible = "fixed-clock"; + clock-frequency = <200000000>; + #clock-cells = <0>; + }; + + dmac_core_clk: dmac-core-clk { + compatible = "fixed-clock"; + clock-frequency = <400000000>; + #clock-cells = <0>; + }; + + dmac_cfg_clk: dmac-gpu-cfg-clk { + compatible = "fixed-clock"; + clock-frequency = <200000000>; + #clock-cells = <0>; + }; + + gmac: ethernet@8000 { + #interrupt-cells = <1>; + compatible = "snps,dwmac"; + reg = <0x8000 0x2000>; + interrupts = <10>; + interrupt-names = "macirq"; + phy-mode = "rgmii-id"; + snps,pbl = <32>; + snps,multicast-filter-bins = <256>; + clocks = <&gmacclk>; + clock-names = "stmmaceth"; + phy-handle = <&phy0>; + resets = <&cgu_rst HSDK_ETH_RESET>; + reset-names = "stmmaceth"; + mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */ + dma-coherent; + + tx-fifo-depth = <4096>; + rx-fifo-depth = <4096>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { /* Micrel KSZ9031 */ + reg = <0>; + }; + }; + }; + + usb@60000 { + compatible = "snps,hsdk-v1.0-ohci", "generic-ohci"; + reg = <0x60000 0x100>; + interrupts = <15>; + resets = <&cgu_rst HSDK_USB_RESET>; + dma-coherent; + }; + + usb@40000 { + compatible = "snps,hsdk-v1.0-ehci", "generic-ehci"; + reg = <0x40000 0x100>; + interrupts = <15>; + resets = <&cgu_rst HSDK_USB_RESET>; + dma-coherent; + }; + + mmc@a000 { + compatible = "altr,socfpga-dw-mshc"; + reg = <0xa000 0x400>; + num-slots = <1>; + fifo-depth = <16>; + card-detect-delay = <200>; + clocks = <&mmcclk_biu>, <&mmcclk_ciu>; + clock-names = "biu", "ciu"; + interrupts = <12>; + bus-width = <4>; + dma-coherent; + }; + + spi0: spi@20000 { + compatible = "snps,dw-apb-ssi"; + reg = <0x20000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <16>; + num-cs = <2>; + reg-io-width = <4>; + clocks = <&input_clk>; + cs-gpios = <&creg_gpio 0 GPIO_ACTIVE_LOW>, + <&creg_gpio 1 GPIO_ACTIVE_LOW>; + + flash@0 { + compatible = "sst26wf016b", "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <4000000>; + }; + + adc@1 { + compatible = "ti,adc108s102"; + reg = <1>; + vref-supply = <®_5v0>; + spi-max-frequency = <1000000>; + }; + }; + + creg_gpio: gpio@14b0 { + compatible = "snps,creg-gpio-hsdk"; + reg = <0x14b0 0x4>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <2>; + }; + + gpio: gpio@3000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x3000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + + gpio_port_a: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <24>; + reg = <0>; + }; + }; + + gpu_3d: gpu@90000 { + compatible = "vivante,gc"; + reg = <0x90000 0x4000>; + clocks = <&gpu_dma_clk>, + <&gpu_cfg_clk>, + <&gpu_core_clk>, + <&gpu_core_clk>; + clock-names = "bus", "reg", "core", "shader"; + interrupts = <28>; + }; + + dmac: dmac@80000 { + compatible = "snps,axi-dma-1.01a"; + reg = <0x80000 0x400>; + interrupts = <27>; + clocks = <&dmac_core_clk>, <&dmac_cfg_clk>; + clock-names = "core-clk", "cfgr-clk"; + + dma-channels = <4>; + snps,dma-masters = <2>; + snps,data-width = <3>; + snps,block-size = <4096 4096 4096 4096>; + snps,priority = <0 1 2 3>; + snps,axi-max-burst-len = <16>; + }; + }; + + memory@80000000 { + #address-cells = <2>; + #size-cells = <2>; + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x40000000>; /* 1 GB lowmem */ + /* 0x1 0x00000000 0x0 0x40000000>; 1 GB highmem */ + }; +}; diff --git a/arch/arc/boot/dts/nsim_700.dts b/arch/arc/boot/dts/nsim_700.dts new file mode 100644 index 0000000000..f8832a15e1 --- /dev/null +++ b/arch/arc/boot/dts/nsim_700.dts @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com) + */ +/dts-v1/; + +/include/ "skeleton.dtsi" + +/ { + model = "snps,nsim"; + compatible = "snps,nsim"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&core_intc>; + + chosen { + bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=ttyS0,115200n8 print-fatal-signals=1"; + }; + + aliases { + serial0 = &uart0; + }; + + fpga { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + /* child and parent address space 1:1 mapped */ + ranges; + + core_clk: core_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <80000000>; + }; + + core_intc: interrupt-controller { + compatible = "snps,arc700-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + uart0: serial@f0000000 { + compatible = "ns16550a"; + reg = <0xf0000000 0x2000>; + interrupts = <24>; + clock-frequency = <50000000>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + no-loopback-test = <1>; + }; + + arcpct0: pct { + compatible = "snps,arc700-pct"; + }; + }; +}; diff --git a/arch/arc/boot/dts/nsimosci.dts b/arch/arc/boot/dts/nsimosci.dts new file mode 100644 index 0000000000..fc207c4a4e --- /dev/null +++ b/arch/arc/boot/dts/nsimosci.dts @@ -0,0 +1,88 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com) + */ +/dts-v1/; + +/include/ "skeleton.dtsi" + +/ { + model = "snps,nsimosci"; + compatible = "snps,nsimosci"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&core_intc>; + + chosen { + /* this is for console on PGU */ + /* bootargs = "console=tty0 consoleblank=0"; */ + /* this is for console on serial */ + bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug video=640x480-24 print-fatal-signals=1"; + }; + + aliases { + serial0 = &uart0; + }; + + fpga { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + /* child and parent address space 1:1 mapped */ + ranges; + + core_clk: core_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <20000000>; + }; + + core_intc: interrupt-controller { + compatible = "snps,arc700-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + uart0: serial@f0000000 { + compatible = "ns8250"; + reg = <0xf0000000 0x2000>; + interrupts = <11>; + clock-frequency = <3686400>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + no-loopback-test = <1>; + }; + + pguclk: pguclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25175000>; + }; + + pgu@f9000000 { + compatible = "snps,arcpgu"; + reg = <0xf9000000 0x400>; + clocks = <&pguclk>; + clock-names = "pxlclk"; + }; + + ps2: ps2@f9001000 { + compatible = "snps,arc_ps2"; + reg = <0xf9000400 0x14>; + interrupts = <13>; + interrupt-names = "arc_ps2_irq"; + }; + + eth0: ethernet@f0003000 { + compatible = "ezchip,nps-mgt-enet"; + reg = <0xf0003000 0x44>; + interrupts = <7>; + }; + + arcpct0: pct { + compatible = "snps,arc700-pct"; + }; + }; +}; diff --git a/arch/arc/boot/dts/nsimosci_hs.dts b/arch/arc/boot/dts/nsimosci_hs.dts new file mode 100644 index 0000000000..71f1f84161 --- /dev/null +++ b/arch/arc/boot/dts/nsimosci_hs.dts @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) + */ +/dts-v1/; + +/include/ "skeleton_hs.dtsi" + +/ { + model = "snps,nsimosci_hs"; + compatible = "snps,nsimosci_hs"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&core_intc>; + + chosen { + /* this is for console on PGU */ + /* bootargs = "console=tty0 consoleblank=0"; */ + /* this is for console on serial */ + bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug video=640x480-24 print-fatal-signals=1"; + }; + + aliases { + serial0 = &uart0; + }; + + fpga { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + /* child and parent address space 1:1 mapped */ + ranges; + + core_clk: core_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <20000000>; + }; + + core_intc: core-interrupt-controller { + compatible = "snps,archs-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + uart0: serial@f0000000 { + compatible = "ns8250"; + reg = <0xf0000000 0x2000>; + interrupts = <24>; + clock-frequency = <3686400>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + no-loopback-test = <1>; + }; + + pguclk: pguclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25175000>; + }; + + pgu@f9000000 { + compatible = "snps,arcpgu"; + reg = <0xf9000000 0x400>; + clocks = <&pguclk>; + clock-names = "pxlclk"; + }; + + ps2: ps2@f9001000 { + compatible = "snps,arc_ps2"; + reg = <0xf9000400 0x14>; + interrupts = <27>; + interrupt-names = "arc_ps2_irq"; + }; + + eth0: ethernet@f0003000 { + compatible = "ezchip,nps-mgt-enet"; + reg = <0xf0003000 0x44>; + interrupts = <25>; + }; + + arcpct0: pct { + compatible = "snps,archs-pct"; + #interrupt-cells = <1>; + interrupts = <20>; + }; + }; +}; diff --git a/arch/arc/boot/dts/nsimosci_hs_idu.dts b/arch/arc/boot/dts/nsimosci_hs_idu.dts new file mode 100644 index 0000000000..69d794c59d --- /dev/null +++ b/arch/arc/boot/dts/nsimosci_hs_idu.dts @@ -0,0 +1,98 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) + */ +/dts-v1/; + +/include/ "skeleton_hs_idu.dtsi" + +/ { + model = "snps,nsimosci_hs-smp"; + compatible = "snps,nsimosci_hs"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&core_intc>; + + chosen { + /* this is for console on serial */ + bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblan=0 debug video=640x480-24 print-fatal-signals=1"; + }; + + aliases { + serial0 = &uart0; + }; + + fpga { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + /* child and parent address space 1:1 mapped */ + ranges; + + core_clk: core_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <5000000>; + }; + + core_intc: core-interrupt-controller { + compatible = "snps,archs-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + idu_intc: idu-interrupt-controller { + compatible = "snps,archs-idu-intc"; + interrupt-controller; + interrupt-parent = <&core_intc>; + #interrupt-cells = <1>; + }; + + uart0: serial@f0000000 { + compatible = "ns8250"; + reg = <0xf0000000 0x2000>; + interrupt-parent = <&idu_intc>; + interrupts = <0>; + clock-frequency = <3686400>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + no-loopback-test = <1>; + }; + + pguclk: pguclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25175000>; + }; + + pgu@f9000000 { + compatible = "snps,arcpgu"; + reg = <0xf9000000 0x400>; + clocks = <&pguclk>; + clock-names = "pxlclk"; + }; + + ps2: ps2@f9001000 { + compatible = "snps,arc_ps2"; + reg = <0xf9000400 0x14>; + interrupts = <3>; + interrupt-parent = <&idu_intc>; + interrupt-names = "arc_ps2_irq"; + }; + + eth0: ethernet@f0003000 { + compatible = "ezchip,nps-mgt-enet"; + reg = <0xf0003000 0x44>; + interrupt-parent = <&idu_intc>; + interrupts = <1>; + }; + + arcpct0: pct { + compatible = "snps,archs-pct"; + #interrupt-cells = <1>; + interrupts = <20>; + }; + }; +}; diff --git a/arch/arc/boot/dts/skeleton.dtsi b/arch/arc/boot/dts/skeleton.dtsi new file mode 100644 index 0000000000..ba86b8036a --- /dev/null +++ b/arch/arc/boot/dts/skeleton.dtsi @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com) + */ + +/* + * Skeleton device tree; the bare minimum needed to boot; just include and + * add a compatible value. + */ + +/ { + compatible = "snps,arc"; + #address-cells = <1>; + #size-cells = <1>; + chosen { }; + aliases { }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "snps,arc770d"; + reg = <0>; + clocks = <&core_clk>; + }; + }; + + /* TIMER0 with interrupt for clockevent */ + timer0 { + compatible = "snps,arc-timer"; + interrupts = <3>; + interrupt-parent = <&core_intc>; + clocks = <&core_clk>; + }; + + /* TIMER1 for free running clocksource */ + timer1 { + compatible = "snps,arc-timer"; + clocks = <&core_clk>; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256M */ + }; +}; diff --git a/arch/arc/boot/dts/skeleton_hs.dtsi b/arch/arc/boot/dts/skeleton_hs.dtsi new file mode 100644 index 0000000000..8fb49890e8 --- /dev/null +++ b/arch/arc/boot/dts/skeleton_hs.dtsi @@ -0,0 +1,49 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2016 Synopsys, Inc. (www.synopsys.com) + */ + +/ { + compatible = "snps,arc"; + #address-cells = <1>; + #size-cells = <1>; + chosen { }; + aliases { }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "snps,archs38"; + reg = <0>; + clocks = <&core_clk>; + }; + }; + + /* TIMER0 with interrupt for clockevent */ + timer0 { + compatible = "snps,arc-timer"; + interrupts = <16>; + interrupt-parent = <&core_intc>; + clocks = <&core_clk>; + }; + + /* 64-bit Local RTC: preferred clocksource for UP */ + rtc { + compatible = "snps,archs-timer-rtc"; + clocks = <&core_clk>; + }; + + /* TIMER1 for free running clocksource: Fallback if rtc not found */ + timer1 { + compatible = "snps,arc-timer"; + clocks = <&core_clk>; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256M */ + }; +}; diff --git a/arch/arc/boot/dts/skeleton_hs_idu.dtsi b/arch/arc/boot/dts/skeleton_hs_idu.dtsi new file mode 100644 index 0000000000..75f5c9ecb5 --- /dev/null +++ b/arch/arc/boot/dts/skeleton_hs_idu.dtsi @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2016 Synopsys, Inc. (www.synopsys.com) + */ + +/ { + compatible = "snps,arc"; + #address-cells = <1>; + #size-cells = <1>; + chosen { }; + aliases { }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "snps,archs38"; + reg = <0>; + clocks = <&core_clk>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "snps,archs38"; + reg = <1>; + clocks = <&core_clk>; + }; + cpu@2 { + device_type = "cpu"; + compatible = "snps,archs38"; + reg = <2>; + clocks = <&core_clk>; + }; + cpu@3 { + device_type = "cpu"; + compatible = "snps,archs38"; + reg = <3>; + clocks = <&core_clk>; + }; + }; + + /* TIMER0 with interrupt for clockevent */ + timer0 { + compatible = "snps,arc-timer"; + interrupts = <16>; + interrupt-parent = <&core_intc>; + clocks = <&core_clk>; + }; + + /* 64-bit Global Free Running Counter */ + gfrc { + compatible = "snps,archs-timer-gfrc"; + clocks = <&core_clk>; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256M */ + }; +}; diff --git a/arch/arc/boot/dts/vdk_axc003.dtsi b/arch/arc/boot/dts/vdk_axc003.dtsi new file mode 100644 index 0000000000..c21d0eb07b --- /dev/null +++ b/arch/arc/boot/dts/vdk_axc003.dtsi @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2013, 2014 Synopsys, Inc. (www.synopsys.com) + */ + +/* + * Device tree for AXC003 CPU card: HS38x UP configuration (VDK version) + */ + +/include/ "skeleton_hs.dtsi" + +/ { + compatible = "snps,arc"; + #address-cells = <1>; + #size-cells = <1>; + + cpu_card { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x00000000 0xf0000000 0x10000000>; + + core_clk: core_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; + + core_intc: archs-intc@cpu { + compatible = "snps,archs-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + debug_uart: dw-apb-uart@5000 { + compatible = "snps,dw-apb-uart"; + reg = <0x5000 0x100>; + clock-frequency = <2403200>; + interrupt-parent = <&core_intc>; + interrupts = <19>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + }; + + mb_intc: interrupt-controller@e0012000 { + #interrupt-cells = <1>; + compatible = "snps,dw-apb-ictl"; + reg = < 0xe0012000 0x200 >; + interrupt-controller; + interrupt-parent = <&core_intc>; + interrupts = < 18 >; + }; + + memory { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x80000000 0x40000000>; + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512MiB */ + }; +}; diff --git a/arch/arc/boot/dts/vdk_axc003_idu.dtsi b/arch/arc/boot/dts/vdk_axc003_idu.dtsi new file mode 100644 index 0000000000..4d348853ac --- /dev/null +++ b/arch/arc/boot/dts/vdk_axc003_idu.dtsi @@ -0,0 +1,73 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2014, 2015 Synopsys, Inc. (www.synopsys.com) + */ + +/* + * Device tree for AXC003 CPU card: + * HS38x2 (Dual Core) with IDU intc (VDK version) + */ + +/include/ "skeleton_hs_idu.dtsi" + +/ { + compatible = "snps,arc"; + #address-cells = <1>; + #size-cells = <1>; + + cpu_card { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x00000000 0xf0000000 0x10000000>; + + core_clk: core_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; + + core_intc: archs-intc@cpu { + compatible = "snps,archs-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + idu_intc: idu-interrupt-controller { + compatible = "snps,archs-idu-intc"; + interrupt-controller; + interrupt-parent = <&core_intc>; + #interrupt-cells = <1>; + }; + + debug_uart: dw-apb-uart@5000 { + compatible = "snps,dw-apb-uart"; + reg = <0x5000 0x100>; + clock-frequency = <2403200>; + interrupt-parent = <&idu_intc>; + interrupts = <2>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + }; + + mb_intc: interrupt-controller@e0012000 { + #interrupt-cells = <1>; + compatible = "snps,dw-apb-ictl"; + reg = < 0xe0012000 0x200 >; + interrupt-controller; + interrupt-parent = <&idu_intc>; + interrupts = <0>; + }; + + memory { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x80000000 0x40000000>; + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512MiB */ + }; +}; diff --git a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi new file mode 100644 index 0000000000..90a412026e --- /dev/null +++ b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi @@ -0,0 +1,126 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Support for peripherals on the AXS10x mainboard (VDK version) + * + * Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com) + */ + +/ { + axs10x_mb_vdk { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0xe0000000 0x10000000>; + interrupt-parent = <&mb_intc>; + + clocks { + apbclk: apbclk { + compatible = "fixed-clock"; + clock-frequency = <50000000>; + #clock-cells = <0>; + }; + + mmcclk: mmcclk { + compatible = "fixed-clock"; + clock-frequency = <50000000>; + #clock-cells = <0>; + }; + + pguclk: pguclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25175000>; + }; + }; + + ethernet@18000 { + #interrupt-cells = <1>; + compatible = "snps,dwmac"; + reg = < 0x18000 0x2000 >; + interrupts = < 4 >; + interrupt-names = "macirq"; + phy-mode = "rgmii"; + snps,phy-addr = < 0 >; // VDK model phy address is 0 + snps,pbl = < 32 >; + clocks = <&apbclk>; + clock-names = "stmmaceth"; + }; + + usb@40000 { + compatible = "generic-ehci"; + reg = < 0x40000 0x100 >; + interrupts = < 8 >; + }; + + uart@20000 { + compatible = "snps,dw-apb-uart"; + reg = <0x20000 0x100>; + clock-frequency = <2403200>; + interrupts = <17>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + uart@21000 { + compatible = "snps,dw-apb-uart"; + reg = <0x21000 0x100>; + clock-frequency = <2403200>; + interrupts = <18>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + uart@22000 { + compatible = "snps,dw-apb-uart"; + reg = <0x22000 0x100>; + clock-frequency = <2403200>; + interrupts = <19>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + }; + +/* PGU output directly sent to virtual LCD screen; hdmi controller not modelled */ + pgu@17000 { + compatible = "snps,arcpgu"; + reg = <0x17000 0x400>; + clocks = <&pguclk>; + clock-names = "pxlclk"; + }; + +/* VDK has additional ps2 keyboard/mouse interface integrated in LCD screen model */ + ps2: ps2@e0017400 { + compatible = "snps,arc_ps2"; + reg = <0x17400 0x14>; + interrupts = <5>; + interrupt-names = "arc_ps2_irq"; + }; + + mmc@15000 { + compatible = "snps,dw-mshc"; + reg = <0x15000 0x400>; + fifo-depth = <1024>; + card-detect-delay = <200>; + clocks = <&apbclk>, <&mmcclk>; + clock-names = "biu", "ciu"; + interrupts = <7>; + bus-width = <4>; + }; + }; + + /* + * Embedded Vision subsystem UIO mappings; only relevant for EV VDK + * + * This node is intentionally put outside of MB above becase + * it maps areas outside of MB's 0xez-0xfz. + */ + uio_ev: uio@d0000000 { + compatible = "generic-uio"; + reg = <0xd0000000 0x2000 0xd1000000 0x2000 0x90000000 0x10000000 0xc0000000 0x10000000>; + reg-names = "ev_gsa", "ev_ctrl", "ev_shared_mem", "ev_code_mem"; + interrupt-parent = <&mb_intc>; + interrupts = <23>; + }; +}; diff --git a/arch/arc/boot/dts/vdk_hs38.dts b/arch/arc/boot/dts/vdk_hs38.dts new file mode 100644 index 0000000000..cddea7eaca --- /dev/null +++ b/arch/arc/boot/dts/vdk_hs38.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com) + * + * ARC HS38 Virtual Development Kit (VDK) + */ +/dts-v1/; + +/include/ "vdk_axc003.dtsi" +/include/ "vdk_axs10x_mb.dtsi" + +/ { + model = "snps,vdk_archs"; + compatible = "snps,axs103"; + + chosen { + bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0"; + }; +}; diff --git a/arch/arc/boot/dts/vdk_hs38_smp.dts b/arch/arc/boot/dts/vdk_hs38_smp.dts new file mode 100644 index 0000000000..f57d1922ee --- /dev/null +++ b/arch/arc/boot/dts/vdk_hs38_smp.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com) + * + * ARC HS38 Virtual Development Kit, SMP version (VDK) + */ +/dts-v1/; + +/include/ "vdk_axc003_idu.dtsi" +/include/ "vdk_axs10x_mb.dtsi" + +/ { + model = "snps,vdk_archs-smp"; + compatible = "snps,axs103"; + + chosen { + bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0 video=640x480-24"; + }; +}; diff --git a/arch/arc/configs/axs101_defconfig b/arch/arc/configs/axs101_defconfig new file mode 100644 index 0000000000..89720d6d7e --- /dev/null +++ b/arch/arc/configs/axs101_defconfig @@ -0,0 +1,104 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_CROSS_MEMORY_ATTACH is not set +CONFIG_NO_HZ_IDLE=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_EXPERT=y +CONFIG_PERF_EVENTS=y +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_SLUB_DEBUG is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_ISA_ARCOMPACT=y +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_ARC_PLAT_AXS10X=y +CONFIG_AXS101=y +CONFIG_ARC_CACHE_LINE_SHIFT=5 +CONFIG_ARC_BUILTIN_DTB_NAME="axs101" +CONFIG_PREEMPT=y +# CONFIG_COMPACTION is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_NET_KEY=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_IPV6 is not set +CONFIG_DEVTMPFS=y +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_NETDEVICES=y +# CONFIG_NET_VENDOR_ARC is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +CONFIG_STMMAC_ETH=y +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_NET_VENDOR_WIZNET is not set +CONFIG_NATIONAL_PHY=y +# CONFIG_USB_NET_DRIVERS is not set +CONFIG_INPUT_EVDEV=y +CONFIG_MOUSE_PS2_TOUCHKIT=y +CONFIG_MOUSE_SERIAL=y +CONFIG_MOUSE_SYNAPTICS_USB=y +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_DESIGNWARE_PLATFORM=y +# CONFIG_HWMON is not set +CONFIG_DRM=m +CONFIG_DRM_I2C_ADV7511=m +CONFIG_DRM_ARCPGU=m +CONFIG_FB=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PLATFORM=y +CONFIG_USB_STORAGE=y +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_DW=y +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT3_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_NTFS_FS=y +CONFIG_TMPFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_STRIP_ASM_SYMS=y +CONFIG_SOFTLOCKUP_DETECTOR=y +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_FTRACE is not set diff --git a/arch/arc/configs/axs103_defconfig b/arch/arc/configs/axs103_defconfig new file mode 100644 index 0000000000..73ec01ed04 --- /dev/null +++ b/arch/arc/configs/axs103_defconfig @@ -0,0 +1,102 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_CROSS_MEMORY_ATTACH is not set +CONFIG_NO_HZ_IDLE=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_EXPERT=y +CONFIG_PERF_EVENTS=y +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_SLUB_DEBUG is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_ARC_PLAT_AXS10X=y +CONFIG_AXS103=y +CONFIG_ISA_ARCV2=y +CONFIG_ARC_BUILTIN_DTB_NAME="axs103" +CONFIG_PREEMPT=y +# CONFIG_COMPACTION is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_NET_KEY=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_IPV6 is not set +CONFIG_DEVTMPFS=y +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_NETDEVICES=y +# CONFIG_NET_VENDOR_ARC is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +CONFIG_STMMAC_ETH=y +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_NET_VENDOR_WIZNET is not set +CONFIG_NATIONAL_PHY=y +# CONFIG_USB_NET_DRIVERS is not set +CONFIG_INPUT_EVDEV=y +CONFIG_MOUSE_PS2_TOUCHKIT=y +CONFIG_MOUSE_SERIAL=y +CONFIG_MOUSE_SYNAPTICS_USB=y +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_DESIGNWARE_PLATFORM=y +# CONFIG_HWMON is not set +CONFIG_FB=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PLATFORM=y +CONFIG_USB_STORAGE=y +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_DW=y +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT3_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_NTFS_FS=y +CONFIG_TMPFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_STRIP_ASM_SYMS=y +CONFIG_SOFTLOCKUP_DETECTOR=y +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_FTRACE is not set diff --git a/arch/arc/configs/axs103_smp_defconfig b/arch/arc/configs/axs103_smp_defconfig new file mode 100644 index 0000000000..4da0f626fa --- /dev/null +++ b/arch/arc/configs/axs103_smp_defconfig @@ -0,0 +1,104 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_CROSS_MEMORY_ATTACH is not set +CONFIG_NO_HZ_IDLE=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_EXPERT=y +CONFIG_PERF_EVENTS=y +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_ARC_PLAT_AXS10X=y +CONFIG_AXS103=y +CONFIG_ISA_ARCV2=y +CONFIG_SMP=y +CONFIG_ARC_BUILTIN_DTB_NAME="axs103_idu" +CONFIG_PREEMPT=y +# CONFIG_COMPACTION is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_NET_KEY=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_IPV6 is not set +CONFIG_DEVTMPFS=y +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_NETDEVICES=y +# CONFIG_NET_VENDOR_ARC is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +CONFIG_STMMAC_ETH=y +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_NET_VENDOR_WIZNET is not set +CONFIG_NATIONAL_PHY=y +# CONFIG_USB_NET_DRIVERS is not set +CONFIG_INPUT_EVDEV=y +CONFIG_MOUSE_PS2_TOUCHKIT=y +CONFIG_MOUSE_SERIAL=y +CONFIG_MOUSE_SYNAPTICS_USB=y +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_DESIGNWARE_PLATFORM=y +# CONFIG_HWMON is not set +CONFIG_DRM=m +CONFIG_DRM_I2C_ADV7511=m +CONFIG_DRM_ARCPGU=m +CONFIG_FB=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PLATFORM=y +CONFIG_USB_STORAGE=y +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_DW=y +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT3_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_NTFS_FS=y +CONFIG_TMPFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_STRIP_ASM_SYMS=y +CONFIG_SOFTLOCKUP_DETECTOR=y +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_FTRACE is not set diff --git a/arch/arc/configs/haps_hs_defconfig b/arch/arc/configs/haps_hs_defconfig new file mode 100644 index 0000000000..8c3ed5d6e6 --- /dev/null +++ b/arch/arc/configs/haps_hs_defconfig @@ -0,0 +1,62 @@ +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_CROSS_MEMORY_ATTACH is not set +CONFIG_NO_HZ_IDLE=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_EXPERT=y +CONFIG_PERF_EVENTS=y +# CONFIG_COMPAT_BRK is not set +CONFIG_ARC_BUILTIN_DTB_NAME="haps_hs" +CONFIG_MODULES=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_COMPACTION is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_PACKET_DIAG=y +CONFIG_UNIX=y +CONFIG_UNIX_DIAG=y +CONFIG_NET_KEY=y +CONFIG_INET=y +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_VIRTIO_BLK=y +CONFIG_NETDEVICES=y +CONFIG_VIRTIO_NET=y +# CONFIG_ETHERNET is not set +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +# CONFIG_HID is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_VIRTIO_MMIO=y +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_TMPFS=y +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NFS_FS=y +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_PREEMPT is not set diff --git a/arch/arc/configs/haps_hs_smp_defconfig b/arch/arc/configs/haps_hs_smp_defconfig new file mode 100644 index 0000000000..6fc98c1b9b --- /dev/null +++ b/arch/arc/configs/haps_hs_smp_defconfig @@ -0,0 +1,62 @@ +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_CROSS_MEMORY_ATTACH is not set +CONFIG_NO_HZ_IDLE=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_EXPERT=y +CONFIG_PERF_EVENTS=y +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_SMP=y +CONFIG_ARC_BUILTIN_DTB_NAME="haps_hs_idu" +CONFIG_KPROBES=y +CONFIG_MODULES=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_COMPACTION is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_PACKET_DIAG=y +CONFIG_UNIX=y +CONFIG_UNIX_DIAG=y +CONFIG_NET_KEY=y +CONFIG_INET=y +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +CONFIG_DEVTMPFS=y +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_BLK_DEV is not set +CONFIG_NETDEVICES=y +# CONFIG_ETHERNET is not set +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +# CONFIG_HID is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_TMPFS=y +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NFS_FS=y +CONFIG_SOFTLOCKUP_DETECTOR=y +# CONFIG_DEBUG_PREEMPT is not set diff --git a/arch/arc/configs/hsdk_defconfig b/arch/arc/configs/hsdk_defconfig new file mode 100644 index 0000000000..9e79154b55 --- /dev/null +++ b/arch/arc/configs/hsdk_defconfig @@ -0,0 +1,93 @@ +CONFIG_SYSVIPC=y +# CONFIG_CROSS_MEMORY_ATTACH is not set +CONFIG_NO_HZ_IDLE=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_BLK_DEV_RAM=y +CONFIG_EXPERT=y +CONFIG_PERF_EVENTS=y +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_ARC_SOC_HSDK=y +CONFIG_ISA_ARCV2=y +CONFIG_SMP=y +CONFIG_LINUX_LINK_BASE=0x90000000 +CONFIG_LINUX_RAM_BASE=0x80000000 +CONFIG_ARC_BUILTIN_DTB_NAME="hsdk" +CONFIG_PREEMPT=y +# CONFIG_COMPACTION is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_DEVTMPFS=y +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_MTD=y +CONFIG_MTD_SPI_NOR=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_NETDEVICES=y +CONFIG_STMMAC_ETH=y +CONFIG_MICREL_PHY=y +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_HW_RANDOM is not set +CONFIG_SPI=y +CONFIG_SPI_DESIGNWARE=y +CONFIG_SPI_DW_MMIO=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_DWAPB=y +CONFIG_GPIO_SNPS_CREG=y +# CONFIG_HWMON is not set +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_DRM=y +# CONFIG_DRM_FBDEV_EMULATION is not set +CONFIG_DRM_UDL=y +CONFIG_DRM_ETNAVIV=y +CONFIG_FB=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PLATFORM=y +CONFIG_USB_STORAGE=y +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_DW=y +CONFIG_DMADEVICES=y +CONFIG_DW_AXI_DMAC=y +CONFIG_IIO=y +CONFIG_TI_ADC108S102=y +CONFIG_EXT3_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_STRIP_ASM_SYMS=y +CONFIG_SOFTLOCKUP_DETECTOR=y +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_FTRACE is not set +CONFIG_CRYPTO_ECHAINIV=y diff --git a/arch/arc/configs/nsim_700_defconfig b/arch/arc/configs/nsim_700_defconfig new file mode 100644 index 0000000000..51092c39e3 --- /dev/null +++ b/arch/arc/configs/nsim_700_defconfig @@ -0,0 +1,59 @@ +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_CROSS_MEMORY_ATTACH is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_KALLSYMS_ALL=y +CONFIG_EXPERT=y +CONFIG_PERF_EVENTS=y +# CONFIG_SLUB_DEBUG is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_ISA_ARCOMPACT=y +CONFIG_ARC_BUILTIN_DTB_NAME="nsim_700" +CONFIG_KPROBES=y +CONFIG_MODULES=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_COMPACTION is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_UNIX_DIAG=y +CONFIG_NET_KEY=y +CONFIG_INET=y +# CONFIG_IPV6 is not set +CONFIG_DEVTMPFS=y +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_BLK_DEV is not set +CONFIG_NETDEVICES=y +# CONFIG_ETHERNET is not set +# CONFIG_WLAN is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +# CONFIG_HID is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_TMPFS=y +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NFS_FS=y +# CONFIG_DEBUG_PREEMPT is not set diff --git a/arch/arc/configs/nsimosci_defconfig b/arch/arc/configs/nsimosci_defconfig new file mode 100644 index 0000000000..70c17bca49 --- /dev/null +++ b/arch/arc/configs/nsimosci_defconfig @@ -0,0 +1,67 @@ +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +# CONFIG_CROSS_MEMORY_ATTACH is not set +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_KALLSYMS_ALL=y +CONFIG_EXPERT=y +CONFIG_PERF_EVENTS=y +# CONFIG_SLUB_DEBUG is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_ISA_ARCOMPACT=y +CONFIG_KPROBES=y +CONFIG_MODULES=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci" +# CONFIG_COMPACTION is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_UNIX_DIAG=y +CONFIG_NET_KEY=y +CONFIG_INET=y +# CONFIG_IPV6 is not set +CONFIG_DEVTMPFS=y +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_BLK_DEV is not set +CONFIG_NETDEVICES=y +CONFIG_EZCHIP_NPS_MANAGEMENT_ENET=y +# CONFIG_INPUT_MOUSEDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_MOUSE_PS2_ALPS is not set +# CONFIG_MOUSE_PS2_LOGIPS2PP is not set +# CONFIG_MOUSE_PS2_SYNAPTICS is not set +# CONFIG_MOUSE_PS2_CYPRESS is not set +# CONFIG_MOUSE_PS2_TRACKPOINT is not set +CONFIG_MOUSE_PS2_TOUCHKIT=y +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_ARC_PS2=y +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +CONFIG_DRM=y +CONFIG_DRM_ARCPGU=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_LOGO=y +# CONFIG_HID is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_TMPFS=y +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y diff --git a/arch/arc/configs/nsimosci_hs_defconfig b/arch/arc/configs/nsimosci_hs_defconfig new file mode 100644 index 0000000000..59a3b6642f --- /dev/null +++ b/arch/arc/configs/nsimosci_hs_defconfig @@ -0,0 +1,65 @@ +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +# CONFIG_CROSS_MEMORY_ATTACH is not set +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_KALLSYMS_ALL=y +CONFIG_EXPERT=y +CONFIG_PERF_EVENTS=y +# CONFIG_SLUB_DEBUG is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_KPROBES=y +CONFIG_MODULES=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_ISA_ARCV2=y +CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci_hs" +# CONFIG_COMPACTION is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_UNIX_DIAG=y +CONFIG_NET_KEY=y +CONFIG_INET=y +# CONFIG_IPV6 is not set +CONFIG_DEVTMPFS=y +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_BLK_DEV is not set +CONFIG_NETDEVICES=y +CONFIG_EZCHIP_NPS_MANAGEMENT_ENET=y +CONFIG_INPUT_EVDEV=y +# CONFIG_MOUSE_PS2_ALPS is not set +# CONFIG_MOUSE_PS2_LOGIPS2PP is not set +# CONFIG_MOUSE_PS2_SYNAPTICS is not set +# CONFIG_MOUSE_PS2_TRACKPOINT is not set +CONFIG_MOUSE_PS2_TOUCHKIT=y +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_ARC_PS2=y +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +CONFIG_DRM=y +CONFIG_DRM_ARCPGU=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_LOGO=y +# CONFIG_HID is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_TMPFS=y +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y diff --git a/arch/arc/configs/nsimosci_hs_smp_defconfig b/arch/arc/configs/nsimosci_hs_smp_defconfig new file mode 100644 index 0000000000..1419fc946a --- /dev/null +++ b/arch/arc/configs/nsimosci_hs_smp_defconfig @@ -0,0 +1,74 @@ +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +# CONFIG_CROSS_MEMORY_ATTACH is not set +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_UTS_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_PERF_EVENTS=y +# CONFIG_COMPAT_BRK is not set +CONFIG_KPROBES=y +CONFIG_MODULES=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_ISA_ARCV2=y +CONFIG_SMP=y +# CONFIG_ARC_TIMERS_64BIT is not set +CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci_hs_idu" +CONFIG_PREEMPT=y +# CONFIG_COMPACTION is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_PACKET_DIAG=y +CONFIG_UNIX=y +CONFIG_UNIX_DIAG=y +CONFIG_NET_KEY=y +CONFIG_INET=y +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +CONFIG_DEVTMPFS=y +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_BLK_DEV is not set +CONFIG_NETDEVICES=y +# CONFIG_NET_VENDOR_ARC is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +CONFIG_EZCHIP_NPS_MANAGEMENT_ENET=y +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_NET_VENDOR_WIZNET is not set +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=y +CONFIG_MOUSE_PS2_TOUCHKIT=y +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_ARC_PS2=y +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +CONFIG_DRM=y +CONFIG_DRM_ARCPGU=y +CONFIG_LOGO=y +# CONFIG_HID is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_TMPFS=y +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_FTRACE=y +# CONFIG_NET_VENDOR_CADENCE is not set diff --git a/arch/arc/configs/tb10x_defconfig b/arch/arc/configs/tb10x_defconfig new file mode 100644 index 0000000000..1a68e4beeb --- /dev/null +++ b/arch/arc/configs/tb10x_defconfig @@ -0,0 +1,99 @@ +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_DEFAULT_HOSTNAME="tb10x" +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_CROSS_MEMORY_ATTACH is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="../tb10x-rootfs.cpio" +CONFIG_INITRAMFS_ROOT_UID=2100 +CONFIG_INITRAMFS_ROOT_GID=501 +# CONFIG_RD_GZIP is not set +CONFIG_KALLSYMS_ALL=y +# CONFIG_AIO is not set +CONFIG_EXPERT=y +# CONFIG_COMPAT_BRK is not set +CONFIG_ISA_ARCOMPACT=y +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLOCK is not set +CONFIG_ARC_PLAT_TB10X=y +CONFIG_ARC_CACHE_LINE_SHIFT=5 +CONFIG_HZ=250 +CONFIG_ARC_BUILTIN_DTB_NAME="abilis_tb100_dvk" +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_COMPACTION is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +CONFIG_DEVTMPFS=y +CONFIG_NETDEVICES=y +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +CONFIG_STMMAC_ETH=y +# CONFIG_NET_VENDOR_WIZNET is not set +# CONFIG_WLAN is not set +# CONFIG_INPUT is not set +# CONFIG_SERIO is not set +# CONFIG_VT is not set +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +CONFIG_SERIAL_8250_DW=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +# CONFIG_I2C_COMPAT is not set +CONFIG_I2C_DESIGNWARE_PLATFORM=y +CONFIG_GPIO_SYSFS=y +# CONFIG_HWMON is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_ONESHOT=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_CPU=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_LEDS_TRIGGER_TRANSIENT=y +CONFIG_DMADEVICES=y +CONFIG_DW_DMAC=y +CONFIG_ASYNC_TX_DMA=y +# CONFIG_IOMMU_SUPPORT is not set +# CONFIG_DNOTIFY is not set +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_CONFIGFS_FS=y +# CONFIG_MISC_FILESYSTEMS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set +CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y +CONFIG_STRIP_ASM_SYMS=y +CONFIG_DEBUG_FS=y +CONFIG_HEADERS_INSTALL=y +CONFIG_DEBUG_SECTION_MISMATCH=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_DEBUG_STACKOVERFLOW=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_SCHEDSTATS=y +# CONFIG_CRYPTO_HW is not set +# CONFIG_NET_VENDOR_CADENCE is not set diff --git a/arch/arc/configs/vdk_hs38_defconfig b/arch/arc/configs/vdk_hs38_defconfig new file mode 100644 index 0000000000..50c3439138 --- /dev/null +++ b/arch/arc/configs/vdk_hs38_defconfig @@ -0,0 +1,94 @@ +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_CROSS_MEMORY_ATTACH is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_EXPERT=y +CONFIG_PERF_EVENTS=y +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_SLUB_DEBUG is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_ARC_PLAT_AXS10X=y +CONFIG_AXS103=y +CONFIG_ISA_ARCV2=y +CONFIG_ARC_BUILTIN_DTB_NAME="vdk_hs38" +CONFIG_PREEMPT=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_NET_KEY=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_IPV6 is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_SLRAM=y +CONFIG_BLK_DEV_RAM=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_NETDEVICES=y +# CONFIG_NET_VENDOR_ARC is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +CONFIG_STMMAC_ETH=y +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_NET_VENDOR_WIZNET is not set +CONFIG_NATIONAL_PHY=y +CONFIG_MOUSE_PS2_TOUCHKIT=y +CONFIG_SERIO_ARC_PS2=y +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +CONFIG_FB=y +# CONFIG_VGA_CONSOLE is not set +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PLATFORM=y +CONFIG_USB_STORAGE=y +CONFIG_USB_SERIAL=y +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT3_FS=y +CONFIG_EXT4_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_NTFS_FS=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_STRIP_ASM_SYMS=y +CONFIG_DEBUG_SHIRQ=y +CONFIG_SOFTLOCKUP_DETECTOR=y +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_FTRACE is not set diff --git a/arch/arc/configs/vdk_hs38_smp_defconfig b/arch/arc/configs/vdk_hs38_smp_defconfig new file mode 100644 index 0000000000..6d9e1d9f71 --- /dev/null +++ b/arch/arc/configs/vdk_hs38_smp_defconfig @@ -0,0 +1,100 @@ +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_CROSS_MEMORY_ATTACH is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_EXPERT=y +CONFIG_PERF_EVENTS=y +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_SLUB_DEBUG is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_ARC_PLAT_AXS10X=y +CONFIG_AXS103=y +CONFIG_ISA_ARCV2=y +CONFIG_SMP=y +# CONFIG_ARC_TIMERS_64BIT is not set +CONFIG_ARC_BUILTIN_DTB_NAME="vdk_hs38_smp" +CONFIG_PREEMPT=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_NET_KEY=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_IPV6 is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_SLRAM=y +CONFIG_BLK_DEV_RAM=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_NETDEVICES=y +# CONFIG_NET_VENDOR_ARC is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +CONFIG_STMMAC_ETH=y +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_NET_VENDOR_WIZNET is not set +CONFIG_NATIONAL_PHY=y +CONFIG_MOUSE_PS2_TOUCHKIT=y +CONFIG_SERIO_ARC_PS2=y +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +CONFIG_DRM=y +CONFIG_DRM_ARCPGU=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PLATFORM=y +CONFIG_USB_STORAGE=y +CONFIG_USB_SERIAL=y +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_DW=y +CONFIG_UIO=y +CONFIG_UIO_PDRV_GENIRQ=y +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT3_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_NTFS_FS=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_STRIP_ASM_SYMS=y +CONFIG_DEBUG_SHIRQ=y +CONFIG_SOFTLOCKUP_DETECTOR=y +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10 +# CONFIG_SCHED_DEBUG is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_FTRACE is not set diff --git a/arch/arc/include/asm/Kbuild b/arch/arc/include/asm/Kbuild new file mode 100644 index 0000000000..3c1afa524b --- /dev/null +++ b/arch/arc/include/asm/Kbuild @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0 +generic-y += extable.h +generic-y += kvm_para.h +generic-y += mcs_spinlock.h +generic-y += parport.h +generic-y += user.h diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h new file mode 100644 index 0000000000..4b13f60fe7 --- /dev/null +++ b/arch/arc/include/asm/arcregs.h @@ -0,0 +1,370 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef _ASM_ARC_ARCREGS_H +#define _ASM_ARC_ARCREGS_H + +/* Build Configuration Registers */ +#define ARC_REG_AUX_DCCM 0x18 /* DCCM Base Addr ARCv2 */ +#define ARC_REG_ERP_CTRL 0x3F /* ARCv2 Error protection control */ +#define ARC_REG_DCCM_BASE_BUILD 0x61 /* DCCM Base Addr ARCompact */ +#define ARC_REG_CRC_BCR 0x62 +#define ARC_REG_VECBASE_BCR 0x68 +#define ARC_REG_PERIBASE_BCR 0x69 +#define ARC_REG_FP_BCR 0x6B /* ARCompact: Single-Precision FPU */ +#define ARC_REG_DPFP_BCR 0x6C /* ARCompact: Dbl Precision FPU */ +#define ARC_REG_ERP_BUILD 0xc7 /* ARCv2 Error protection Build: ECC/Parity */ +#define ARC_REG_FP_V2_BCR 0xc8 /* ARCv2 FPU */ +#define ARC_REG_SLC_BCR 0xce +#define ARC_REG_DCCM_BUILD 0x74 /* DCCM size (common) */ +#define ARC_REG_AP_BCR 0x76 +#define ARC_REG_ICCM_BUILD 0x78 /* ICCM size (common) */ +#define ARC_REG_XY_MEM_BCR 0x79 +#define ARC_REG_MAC_BCR 0x7a +#define ARC_REG_MPY_BCR 0x7b +#define ARC_REG_SWAP_BCR 0x7c +#define ARC_REG_NORM_BCR 0x7d +#define ARC_REG_MIXMAX_BCR 0x7e +#define ARC_REG_BARREL_BCR 0x7f +#define ARC_REG_D_UNCACH_BCR 0x6A +#define ARC_REG_BPU_BCR 0xc0 +#define ARC_REG_ISA_CFG_BCR 0xc1 +#define ARC_REG_LPB_BUILD 0xE9 /* ARCv2 Loop Buffer Build */ +#define ARC_REG_RTT_BCR 0xF2 +#define ARC_REG_IRQ_BCR 0xF3 +#define ARC_REG_MICRO_ARCH_BCR 0xF9 /* ARCv2 Product revision */ +#define ARC_REG_SMART_BCR 0xFF +#define ARC_REG_CLUSTER_BCR 0xcf +#define ARC_REG_AUX_ICCM 0x208 /* ICCM Base Addr (ARCv2) */ +#define ARC_REG_LPB_CTRL 0x488 /* ARCv2 Loop Buffer control */ +#define ARC_REG_FPU_CTRL 0x300 +#define ARC_REG_FPU_STATUS 0x301 + +/* Common for ARCompact and ARCv2 status register */ +#define ARC_REG_STATUS32 0x0A + +/* status32 Bits Positions */ +#define STATUS_AE_BIT 5 /* Exception active */ +#define STATUS_DE_BIT 6 /* PC is in delay slot */ +#define STATUS_U_BIT 7 /* User/Kernel mode */ +#define STATUS_Z_BIT 11 +#define STATUS_L_BIT 12 /* Loop inhibit */ + +/* These masks correspond to the status word(STATUS_32) bits */ +#define STATUS_AE_MASK (1<<STATUS_AE_BIT) +#define STATUS_DE_MASK (1<<STATUS_DE_BIT) +#define STATUS_U_MASK (1<<STATUS_U_BIT) +#define STATUS_Z_MASK (1<<STATUS_Z_BIT) +#define STATUS_L_MASK (1<<STATUS_L_BIT) + +/* + * ECR: Exception Cause Reg bits-n-pieces + * [23:16] = Exception Vector + * [15: 8] = Exception Cause Code + * [ 7: 0] = Exception Parameters (for certain types only) + */ +#ifdef CONFIG_ISA_ARCOMPACT +#define ECR_V_MEM_ERR 0x01 +#define ECR_V_INSN_ERR 0x02 +#define ECR_V_MACH_CHK 0x20 +#define ECR_V_ITLB_MISS 0x21 +#define ECR_V_DTLB_MISS 0x22 +#define ECR_V_PROTV 0x23 +#define ECR_V_TRAP 0x25 +#else +#define ECR_V_MEM_ERR 0x01 +#define ECR_V_INSN_ERR 0x02 +#define ECR_V_MACH_CHK 0x03 +#define ECR_V_ITLB_MISS 0x04 +#define ECR_V_DTLB_MISS 0x05 +#define ECR_V_PROTV 0x06 +#define ECR_V_TRAP 0x09 +#define ECR_V_MISALIGN 0x0d +#endif + +/* DTLB Miss and Protection Violation Cause Codes */ + +#define ECR_C_PROTV_INST_FETCH 0x00 +#define ECR_C_PROTV_LOAD 0x01 +#define ECR_C_PROTV_STORE 0x02 +#define ECR_C_PROTV_XCHG 0x03 +#define ECR_C_PROTV_MISALIG_DATA 0x04 + +#define ECR_C_BIT_PROTV_MISALIG_DATA 10 + +/* Machine Check Cause Code Values */ +#define ECR_C_MCHK_DUP_TLB 0x01 + +/* DTLB Miss Exception Cause Code Values */ +#define ECR_C_BIT_DTLB_LD_MISS 8 +#define ECR_C_BIT_DTLB_ST_MISS 9 + +/* Auxiliary registers */ +#define AUX_IDENTITY 4 +#define AUX_EXEC_CTRL 8 +#define AUX_INTR_VEC_BASE 0x25 +#define AUX_VOL 0x5e + +/* + * Floating Pt Registers + * Status regs are read-only (build-time) so need not be saved/restored + */ +#define ARC_AUX_FP_STAT 0x300 +#define ARC_AUX_DPFP_1L 0x301 +#define ARC_AUX_DPFP_1H 0x302 +#define ARC_AUX_DPFP_2L 0x303 +#define ARC_AUX_DPFP_2H 0x304 +#define ARC_AUX_DPFP_STAT 0x305 + +/* + * DSP-related registers + * Registers names must correspond to dsp_callee_regs structure fields names + * for automatic offset calculation in DSP_AUX_SAVE_RESTORE macros. + */ +#define ARC_AUX_DSP_BUILD 0x7A +#define ARC_AUX_ACC0_LO 0x580 +#define ARC_AUX_ACC0_GLO 0x581 +#define ARC_AUX_ACC0_HI 0x582 +#define ARC_AUX_ACC0_GHI 0x583 +#define ARC_AUX_DSP_BFLY0 0x598 +#define ARC_AUX_DSP_CTRL 0x59F +#define ARC_AUX_DSP_FFT_CTRL 0x59E + +#define ARC_AUX_AGU_BUILD 0xCC +#define ARC_AUX_AGU_AP0 0x5C0 +#define ARC_AUX_AGU_AP1 0x5C1 +#define ARC_AUX_AGU_AP2 0x5C2 +#define ARC_AUX_AGU_AP3 0x5C3 +#define ARC_AUX_AGU_OS0 0x5D0 +#define ARC_AUX_AGU_OS1 0x5D1 +#define ARC_AUX_AGU_MOD0 0x5E0 +#define ARC_AUX_AGU_MOD1 0x5E1 +#define ARC_AUX_AGU_MOD2 0x5E2 +#define ARC_AUX_AGU_MOD3 0x5E3 + +#ifndef __ASSEMBLY__ + +#include <soc/arc/aux.h> + +/* Helpers */ +#define TO_KB(bytes) ((bytes) >> 10) +#define TO_MB(bytes) (TO_KB(bytes) >> 10) +#define PAGES_TO_KB(n_pages) ((n_pages) << (PAGE_SHIFT - 10)) +#define PAGES_TO_MB(n_pages) (PAGES_TO_KB(n_pages) >> 10) + + +/* + *************************************************************** + * Build Configuration Registers, with encoded hardware config + */ +struct bcr_identity { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int chip_id:16, cpu_id:8, family:8; +#else + unsigned int family:8, cpu_id:8, chip_id:16; +#endif +}; + +struct bcr_isa_arcv2 { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int div_rem:4, pad2:4, ldd:1, unalign:1, atomic:1, be:1, + pad1:12, ver:8; +#else + unsigned int ver:8, pad1:12, be:1, atomic:1, unalign:1, + ldd:1, pad2:4, div_rem:4; +#endif +}; + +struct bcr_uarch_build { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int pad:8, prod:8, maj:8, min:8; +#else + unsigned int min:8, maj:8, prod:8, pad:8; +#endif +}; + +struct bcr_mmu_3 { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int ver:8, ways:4, sets:4, res:3, sasid:1, pg_sz:4, + u_itlb:4, u_dtlb:4; +#else + unsigned int u_dtlb:4, u_itlb:4, pg_sz:4, sasid:1, res:3, sets:4, + ways:4, ver:8; +#endif +}; + +struct bcr_mmu_4 { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int ver:8, sasid:1, sz1:4, sz0:4, res:2, pae:1, + n_ways:2, n_entry:2, n_super:2, u_itlb:3, u_dtlb:3; +#else + /* DTLB ITLB JES JE JA */ + unsigned int u_dtlb:3, u_itlb:3, n_super:2, n_entry:2, n_ways:2, + pae:1, res:2, sz0:4, sz1:4, sasid:1, ver:8; +#endif +}; + +struct bcr_cache { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int pad:12, line_len:4, sz:4, config:4, ver:8; +#else + unsigned int ver:8, config:4, sz:4, line_len:4, pad:12; +#endif +}; + +struct bcr_slc_cfg { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int pad:24, way:2, lsz:2, sz:4; +#else + unsigned int sz:4, lsz:2, way:2, pad:24; +#endif +}; + +struct bcr_clust_cfg { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int pad:7, c:1, num_entries:8, num_cores:8, ver:8; +#else + unsigned int ver:8, num_cores:8, num_entries:8, c:1, pad:7; +#endif +}; + +struct bcr_volatile { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int start:4, limit:4, pad:22, order:1, disable:1; +#else + unsigned int disable:1, order:1, pad:22, limit:4, start:4; +#endif +}; + +struct bcr_mpy { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int pad:8, x1616:8, dsp:4, cycles:2, type:2, ver:8; +#else + unsigned int ver:8, type:2, cycles:2, dsp:4, x1616:8, pad:8; +#endif +}; + +struct bcr_iccm_arcompact { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int base:16, pad:5, sz:3, ver:8; +#else + unsigned int ver:8, sz:3, pad:5, base:16; +#endif +}; + +struct bcr_iccm_arcv2 { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int pad:8, sz11:4, sz01:4, sz10:4, sz00:4, ver:8; +#else + unsigned int ver:8, sz00:4, sz10:4, sz01:4, sz11:4, pad:8; +#endif +}; + +struct bcr_dccm_arcompact { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int res:21, sz:3, ver:8; +#else + unsigned int ver:8, sz:3, res:21; +#endif +}; + +struct bcr_dccm_arcv2 { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int pad2:12, cyc:3, pad1:1, sz1:4, sz0:4, ver:8; +#else + unsigned int ver:8, sz0:4, sz1:4, pad1:1, cyc:3, pad2:12; +#endif +}; + +/* ARCompact: Both SP and DP FPU BCRs have same format */ +struct bcr_fp_arcompact { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int fast:1, ver:8; +#else + unsigned int ver:8, fast:1; +#endif +}; + +struct bcr_fp_arcv2 { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int pad2:15, dp:1, pad1:7, sp:1, ver:8; +#else + unsigned int ver:8, sp:1, pad1:7, dp:1, pad2:15; +#endif +}; + +struct bcr_actionpoint { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int pad:21, min:1, num:2, ver:8; +#else + unsigned int ver:8, num:2, min:1, pad:21; +#endif +}; + +#include <soc/arc/timers.h> + +struct bcr_bpu_arcompact { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int pad2:19, fam:1, pad:2, ent:2, ver:8; +#else + unsigned int ver:8, ent:2, pad:2, fam:1, pad2:19; +#endif +}; + +struct bcr_bpu_arcv2 { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int pad:6, fbe:2, tqe:2, ts:4, ft:1, rse:2, pte:3, bce:3, ver:8; +#else + unsigned int ver:8, bce:3, pte:3, rse:2, ft:1, ts:4, tqe:2, fbe:2, pad:6; +#endif +}; + +/* Error Protection Build: ECC/Parity */ +struct bcr_erp { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int pad3:5, mmu:3, pad2:4, ic:3, dc:3, pad1:6, ver:8; +#else + unsigned int ver:8, pad1:6, dc:3, ic:3, pad2:4, mmu:3, pad3:5; +#endif +}; + +/* Error Protection Control */ +struct ctl_erp { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int pad2:27, mpd:1, pad1:2, dpd:1, dpi:1; +#else + unsigned int dpi:1, dpd:1, pad1:2, mpd:1, pad2:27; +#endif +}; + +struct bcr_lpb { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int pad:16, entries:8, ver:8; +#else + unsigned int ver:8, entries:8, pad:16; +#endif +}; + +struct bcr_generic { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int info:24, ver:8; +#else + unsigned int ver:8, info:24; +#endif +}; + +static inline int is_isa_arcv2(void) +{ + return IS_ENABLED(CONFIG_ISA_ARCV2); +} + +static inline int is_isa_arcompact(void) +{ + return IS_ENABLED(CONFIG_ISA_ARCOMPACT); +} + +#endif /* __ASEMBLY__ */ + +#endif /* _ASM_ARC_ARCREGS_H */ diff --git a/arch/arc/include/asm/asm-offsets.h b/arch/arc/include/asm/asm-offsets.h new file mode 100644 index 0000000000..32a1d3d518 --- /dev/null +++ b/arch/arc/include/asm/asm-offsets.h @@ -0,0 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#include <generated/asm-offsets.h> diff --git a/arch/arc/include/asm/asserts.h b/arch/arc/include/asm/asserts.h new file mode 100644 index 0000000000..108f33be6a --- /dev/null +++ b/arch/arc/include/asm/asserts.h @@ -0,0 +1,34 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2020 Synopsys, Inc. (www.synopsys.com) + * + * Author: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> + */ +#ifndef __ASM_ARC_ASSERTS_H +#define __ASM_ARC_ASSERTS_H + +/* Helpers to sanitize config options. */ + +void chk_opt_strict(char *opt_name, bool hw_exists, bool opt_ena); +void chk_opt_weak(char *opt_name, bool hw_exists, bool opt_ena); + +/* + * Check required config option: + * - panic in case of OPT enabled but corresponding HW absent. + * - warn in case of OPT disabled but corresponding HW exists. +*/ +#define CHK_OPT_STRICT(opt_name, hw_exists) \ +({ \ + chk_opt_strict(#opt_name, hw_exists, IS_ENABLED(opt_name)); \ +}) + +/* + * Check optional config option: + * - panic in case of OPT enabled but corresponding HW absent. +*/ +#define CHK_OPT_WEAK(opt_name, hw_exists) \ +({ \ + chk_opt_weak(#opt_name, hw_exists, IS_ENABLED(opt_name)); \ +}) + +#endif /* __ASM_ARC_ASSERTS_H */ diff --git a/arch/arc/include/asm/atomic-llsc.h b/arch/arc/include/asm/atomic-llsc.h new file mode 100644 index 0000000000..5258cb81a1 --- /dev/null +++ b/arch/arc/include/asm/atomic-llsc.h @@ -0,0 +1,97 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef _ASM_ARC_ATOMIC_LLSC_H +#define _ASM_ARC_ATOMIC_LLSC_H + +#define arch_atomic_set(v, i) WRITE_ONCE(((v)->counter), (i)) + +#define ATOMIC_OP(op, asm_op) \ +static inline void arch_atomic_##op(int i, atomic_t *v) \ +{ \ + unsigned int val; \ + \ + __asm__ __volatile__( \ + "1: llock %[val], [%[ctr]] \n" \ + " " #asm_op " %[val], %[val], %[i] \n" \ + " scond %[val], [%[ctr]] \n" \ + " bnz 1b \n" \ + : [val] "=&r" (val) /* Early clobber to prevent reg reuse */ \ + : [ctr] "r" (&v->counter), /* Not "m": llock only supports reg direct addr mode */ \ + [i] "ir" (i) \ + : "cc", "memory"); \ +} \ + +#define ATOMIC_OP_RETURN(op, asm_op) \ +static inline int arch_atomic_##op##_return_relaxed(int i, atomic_t *v) \ +{ \ + unsigned int val; \ + \ + __asm__ __volatile__( \ + "1: llock %[val], [%[ctr]] \n" \ + " " #asm_op " %[val], %[val], %[i] \n" \ + " scond %[val], [%[ctr]] \n" \ + " bnz 1b \n" \ + : [val] "=&r" (val) \ + : [ctr] "r" (&v->counter), \ + [i] "ir" (i) \ + : "cc", "memory"); \ + \ + return val; \ +} + +#define arch_atomic_add_return_relaxed arch_atomic_add_return_relaxed +#define arch_atomic_sub_return_relaxed arch_atomic_sub_return_relaxed + +#define ATOMIC_FETCH_OP(op, asm_op) \ +static inline int arch_atomic_fetch_##op##_relaxed(int i, atomic_t *v) \ +{ \ + unsigned int val, orig; \ + \ + __asm__ __volatile__( \ + "1: llock %[orig], [%[ctr]] \n" \ + " " #asm_op " %[val], %[orig], %[i] \n" \ + " scond %[val], [%[ctr]] \n" \ + " bnz 1b \n" \ + : [val] "=&r" (val), \ + [orig] "=&r" (orig) \ + : [ctr] "r" (&v->counter), \ + [i] "ir" (i) \ + : "cc", "memory"); \ + \ + return orig; \ +} + +#define arch_atomic_fetch_add_relaxed arch_atomic_fetch_add_relaxed +#define arch_atomic_fetch_sub_relaxed arch_atomic_fetch_sub_relaxed + +#define arch_atomic_fetch_and_relaxed arch_atomic_fetch_and_relaxed +#define arch_atomic_fetch_andnot_relaxed arch_atomic_fetch_andnot_relaxed +#define arch_atomic_fetch_or_relaxed arch_atomic_fetch_or_relaxed +#define arch_atomic_fetch_xor_relaxed arch_atomic_fetch_xor_relaxed + +#define ATOMIC_OPS(op, asm_op) \ + ATOMIC_OP(op, asm_op) \ + ATOMIC_OP_RETURN(op, asm_op) \ + ATOMIC_FETCH_OP(op, asm_op) + +ATOMIC_OPS(add, add) +ATOMIC_OPS(sub, sub) + +#undef ATOMIC_OPS +#define ATOMIC_OPS(op, asm_op) \ + ATOMIC_OP(op, asm_op) \ + ATOMIC_FETCH_OP(op, asm_op) + +ATOMIC_OPS(and, and) +ATOMIC_OPS(andnot, bic) +ATOMIC_OPS(or, or) +ATOMIC_OPS(xor, xor) + +#define arch_atomic_andnot arch_atomic_andnot + +#undef ATOMIC_OPS +#undef ATOMIC_FETCH_OP +#undef ATOMIC_OP_RETURN +#undef ATOMIC_OP + +#endif diff --git a/arch/arc/include/asm/atomic-spinlock.h b/arch/arc/include/asm/atomic-spinlock.h new file mode 100644 index 0000000000..89d12a60f8 --- /dev/null +++ b/arch/arc/include/asm/atomic-spinlock.h @@ -0,0 +1,111 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef _ASM_ARC_ATOMIC_SPLOCK_H +#define _ASM_ARC_ATOMIC_SPLOCK_H + +/* + * Non hardware assisted Atomic-R-M-W + * Locking would change to irq-disabling only (UP) and spinlocks (SMP) + */ + +static inline void arch_atomic_set(atomic_t *v, int i) +{ + /* + * Independent of hardware support, all of the atomic_xxx() APIs need + * to follow the same locking rules to make sure that a "hardware" + * atomic insn (e.g. LD) doesn't clobber an "emulated" atomic insn + * sequence + * + * Thus atomic_set() despite being 1 insn (and seemingly atomic) + * requires the locking. + */ + unsigned long flags; + + atomic_ops_lock(flags); + WRITE_ONCE(v->counter, i); + atomic_ops_unlock(flags); +} + +#define arch_atomic_set_release(v, i) arch_atomic_set((v), (i)) + +#define ATOMIC_OP(op, c_op, asm_op) \ +static inline void arch_atomic_##op(int i, atomic_t *v) \ +{ \ + unsigned long flags; \ + \ + atomic_ops_lock(flags); \ + v->counter c_op i; \ + atomic_ops_unlock(flags); \ +} + +#define ATOMIC_OP_RETURN(op, c_op, asm_op) \ +static inline int arch_atomic_##op##_return(int i, atomic_t *v) \ +{ \ + unsigned long flags; \ + unsigned int temp; \ + \ + /* \ + * spin lock/unlock provides the needed smp_mb() before/after \ + */ \ + atomic_ops_lock(flags); \ + temp = v->counter; \ + temp c_op i; \ + v->counter = temp; \ + atomic_ops_unlock(flags); \ + \ + return temp; \ +} + +#define ATOMIC_FETCH_OP(op, c_op, asm_op) \ +static inline int arch_atomic_fetch_##op(int i, atomic_t *v) \ +{ \ + unsigned long flags; \ + unsigned int orig; \ + \ + /* \ + * spin lock/unlock provides the needed smp_mb() before/after \ + */ \ + atomic_ops_lock(flags); \ + orig = v->counter; \ + v->counter c_op i; \ + atomic_ops_unlock(flags); \ + \ + return orig; \ +} + +#define ATOMIC_OPS(op, c_op, asm_op) \ + ATOMIC_OP(op, c_op, asm_op) \ + ATOMIC_OP_RETURN(op, c_op, asm_op) \ + ATOMIC_FETCH_OP(op, c_op, asm_op) + +ATOMIC_OPS(add, +=, add) +ATOMIC_OPS(sub, -=, sub) + +#define arch_atomic_fetch_add arch_atomic_fetch_add +#define arch_atomic_fetch_sub arch_atomic_fetch_sub +#define arch_atomic_add_return arch_atomic_add_return +#define arch_atomic_sub_return arch_atomic_sub_return + +#undef ATOMIC_OPS +#define ATOMIC_OPS(op, c_op, asm_op) \ + ATOMIC_OP(op, c_op, asm_op) \ + ATOMIC_FETCH_OP(op, c_op, asm_op) + +ATOMIC_OPS(and, &=, and) +ATOMIC_OPS(andnot, &= ~, bic) +ATOMIC_OPS(or, |=, or) +ATOMIC_OPS(xor, ^=, xor) + +#define arch_atomic_andnot arch_atomic_andnot + +#define arch_atomic_fetch_and arch_atomic_fetch_and +#define arch_atomic_fetch_andnot arch_atomic_fetch_andnot +#define arch_atomic_fetch_or arch_atomic_fetch_or +#define arch_atomic_fetch_xor arch_atomic_fetch_xor + +#undef ATOMIC_OPS +#undef ATOMIC_FETCH_OP +#undef ATOMIC_OP_RETURN +#undef ATOMIC_OP + +#endif diff --git a/arch/arc/include/asm/atomic.h b/arch/arc/include/asm/atomic.h new file mode 100644 index 0000000000..592d7fffc2 --- /dev/null +++ b/arch/arc/include/asm/atomic.h @@ -0,0 +1,36 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef _ASM_ARC_ATOMIC_H +#define _ASM_ARC_ATOMIC_H + +#ifndef __ASSEMBLY__ + +#include <linux/types.h> +#include <linux/compiler.h> +#include <asm/cmpxchg.h> +#include <asm/barrier.h> +#include <asm/smp.h> + +#define arch_atomic_read(v) READ_ONCE((v)->counter) + +#ifdef CONFIG_ARC_HAS_LLSC +#include <asm/atomic-llsc.h> +#else +#include <asm/atomic-spinlock.h> +#endif + +/* + * 64-bit atomics + */ +#ifdef CONFIG_GENERIC_ATOMIC64 +#include <asm-generic/atomic64.h> +#else +#include <asm/atomic64-arcv2.h> +#endif + +#endif /* !__ASSEMBLY__ */ + +#endif diff --git a/arch/arc/include/asm/atomic64-arcv2.h b/arch/arc/include/asm/atomic64-arcv2.h new file mode 100644 index 0000000000..9b5791b854 --- /dev/null +++ b/arch/arc/include/asm/atomic64-arcv2.h @@ -0,0 +1,235 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +/* + * ARCv2 supports 64-bit exclusive load (LLOCKD) / store (SCONDD) + * - The address HAS to be 64-bit aligned + */ + +#ifndef _ASM_ARC_ATOMIC64_ARCV2_H +#define _ASM_ARC_ATOMIC64_ARCV2_H + +typedef struct { + s64 __aligned(8) counter; +} atomic64_t; + +#define ATOMIC64_INIT(a) { (a) } + +static inline s64 arch_atomic64_read(const atomic64_t *v) +{ + s64 val; + + __asm__ __volatile__( + " ldd %0, [%1] \n" + : "=r"(val) + : "r"(&v->counter)); + + return val; +} + +static inline void arch_atomic64_set(atomic64_t *v, s64 a) +{ + /* + * This could have been a simple assignment in "C" but would need + * explicit volatile. Otherwise gcc optimizers could elide the store + * which borked atomic64 self-test + * In the inline asm version, memory clobber needed for exact same + * reason, to tell gcc about the store. + * + * This however is not needed for sibling atomic64_add() etc since both + * load/store are explicitly done in inline asm. As long as API is used + * for each access, gcc has no way to optimize away any load/store + */ + __asm__ __volatile__( + " std %0, [%1] \n" + : + : "r"(a), "r"(&v->counter) + : "memory"); +} + +#define ATOMIC64_OP(op, op1, op2) \ +static inline void arch_atomic64_##op(s64 a, atomic64_t *v) \ +{ \ + s64 val; \ + \ + __asm__ __volatile__( \ + "1: \n" \ + " llockd %0, [%1] \n" \ + " " #op1 " %L0, %L0, %L2 \n" \ + " " #op2 " %H0, %H0, %H2 \n" \ + " scondd %0, [%1] \n" \ + " bnz 1b \n" \ + : "=&r"(val) \ + : "r"(&v->counter), "ir"(a) \ + : "cc", "memory"); \ +} \ + +#define ATOMIC64_OP_RETURN(op, op1, op2) \ +static inline s64 arch_atomic64_##op##_return_relaxed(s64 a, atomic64_t *v) \ +{ \ + s64 val; \ + \ + __asm__ __volatile__( \ + "1: \n" \ + " llockd %0, [%1] \n" \ + " " #op1 " %L0, %L0, %L2 \n" \ + " " #op2 " %H0, %H0, %H2 \n" \ + " scondd %0, [%1] \n" \ + " bnz 1b \n" \ + : [val] "=&r"(val) \ + : "r"(&v->counter), "ir"(a) \ + : "cc", "memory"); \ + \ + return val; \ +} + +#define arch_atomic64_add_return_relaxed arch_atomic64_add_return_relaxed +#define arch_atomic64_sub_return_relaxed arch_atomic64_sub_return_relaxed + +#define ATOMIC64_FETCH_OP(op, op1, op2) \ +static inline s64 arch_atomic64_fetch_##op##_relaxed(s64 a, atomic64_t *v) \ +{ \ + s64 val, orig; \ + \ + __asm__ __volatile__( \ + "1: \n" \ + " llockd %0, [%2] \n" \ + " " #op1 " %L1, %L0, %L3 \n" \ + " " #op2 " %H1, %H0, %H3 \n" \ + " scondd %1, [%2] \n" \ + " bnz 1b \n" \ + : "=&r"(orig), "=&r"(val) \ + : "r"(&v->counter), "ir"(a) \ + : "cc", "memory"); \ + \ + return orig; \ +} + +#define arch_atomic64_fetch_add_relaxed arch_atomic64_fetch_add_relaxed +#define arch_atomic64_fetch_sub_relaxed arch_atomic64_fetch_sub_relaxed + +#define arch_atomic64_fetch_and_relaxed arch_atomic64_fetch_and_relaxed +#define arch_atomic64_fetch_andnot_relaxed arch_atomic64_fetch_andnot_relaxed +#define arch_atomic64_fetch_or_relaxed arch_atomic64_fetch_or_relaxed +#define arch_atomic64_fetch_xor_relaxed arch_atomic64_fetch_xor_relaxed + +#define ATOMIC64_OPS(op, op1, op2) \ + ATOMIC64_OP(op, op1, op2) \ + ATOMIC64_OP_RETURN(op, op1, op2) \ + ATOMIC64_FETCH_OP(op, op1, op2) + +ATOMIC64_OPS(add, add.f, adc) +ATOMIC64_OPS(sub, sub.f, sbc) + +#undef ATOMIC64_OPS +#define ATOMIC64_OPS(op, op1, op2) \ + ATOMIC64_OP(op, op1, op2) \ + ATOMIC64_FETCH_OP(op, op1, op2) + +ATOMIC64_OPS(and, and, and) +ATOMIC64_OPS(andnot, bic, bic) +ATOMIC64_OPS(or, or, or) +ATOMIC64_OPS(xor, xor, xor) + +#define arch_atomic64_andnot arch_atomic64_andnot + +#undef ATOMIC64_OPS +#undef ATOMIC64_FETCH_OP +#undef ATOMIC64_OP_RETURN +#undef ATOMIC64_OP + +static inline s64 +arch_atomic64_cmpxchg(atomic64_t *ptr, s64 expected, s64 new) +{ + s64 prev; + + smp_mb(); + + __asm__ __volatile__( + "1: llockd %0, [%1] \n" + " brne %L0, %L2, 2f \n" + " brne %H0, %H2, 2f \n" + " scondd %3, [%1] \n" + " bnz 1b \n" + "2: \n" + : "=&r"(prev) + : "r"(ptr), "ir"(expected), "r"(new) + : "cc"); /* memory clobber comes from smp_mb() */ + + smp_mb(); + + return prev; +} +#define arch_atomic64_cmpxchg arch_atomic64_cmpxchg + +static inline s64 arch_atomic64_xchg(atomic64_t *ptr, s64 new) +{ + s64 prev; + + smp_mb(); + + __asm__ __volatile__( + "1: llockd %0, [%1] \n" + " scondd %2, [%1] \n" + " bnz 1b \n" + "2: \n" + : "=&r"(prev) + : "r"(ptr), "r"(new) + : "cc"); /* memory clobber comes from smp_mb() */ + + smp_mb(); + + return prev; +} +#define arch_atomic64_xchg arch_atomic64_xchg + +static inline s64 arch_atomic64_dec_if_positive(atomic64_t *v) +{ + s64 val; + + smp_mb(); + + __asm__ __volatile__( + "1: llockd %0, [%1] \n" + " sub.f %L0, %L0, 1 # w0 - 1, set C on borrow\n" + " sub.c %H0, %H0, 1 # if C set, w1 - 1\n" + " brlt %H0, 0, 2f \n" + " scondd %0, [%1] \n" + " bnz 1b \n" + "2: \n" + : "=&r"(val) + : "r"(&v->counter) + : "cc"); /* memory clobber comes from smp_mb() */ + + smp_mb(); + + return val; +} +#define arch_atomic64_dec_if_positive arch_atomic64_dec_if_positive + +static inline s64 arch_atomic64_fetch_add_unless(atomic64_t *v, s64 a, s64 u) +{ + s64 old, temp; + + smp_mb(); + + __asm__ __volatile__( + "1: llockd %0, [%2] \n" + " brne %L0, %L4, 2f # continue to add since v != u \n" + " breq.d %H0, %H4, 3f # return since v == u \n" + "2: \n" + " add.f %L1, %L0, %L3 \n" + " adc %H1, %H0, %H3 \n" + " scondd %1, [%2] \n" + " bnz 1b \n" + "3: \n" + : "=&r"(old), "=&r" (temp) + : "r"(&v->counter), "r"(a), "r"(u) + : "cc"); /* memory clobber comes from smp_mb() */ + + smp_mb(); + + return old; +} +#define arch_atomic64_fetch_add_unless arch_atomic64_fetch_add_unless + +#endif diff --git a/arch/arc/include/asm/barrier.h b/arch/arc/include/asm/barrier.h new file mode 100644 index 0000000000..4637de9e02 --- /dev/null +++ b/arch/arc/include/asm/barrier.h @@ -0,0 +1,44 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef __ASM_BARRIER_H +#define __ASM_BARRIER_H + +#ifdef CONFIG_ISA_ARCV2 + +/* + * ARCv2 based HS38 cores are in-order issue, but still weakly ordered + * due to micro-arch buffering/queuing of load/store, cache hit vs. miss ... + * + * Explicit barrier provided by DMB instruction + * - Operand supports fine grained load/store/load+store semantics + * - Ensures that selected memory operation issued before it will complete + * before any subsequent memory operation of same type + * - DMB guarantees SMP as well as local barrier semantics + * (asm-generic/barrier.h ensures sane smp_*mb if not defined here, i.e. + * UP: barrier(), SMP: smp_*mb == *mb) + * - DSYNC provides DMB+completion_of_cache_bpu_maintenance_ops hence not needed + * in the general case. Plus it only provides full barrier. + */ + +#define mb() asm volatile("dmb 3\n" : : : "memory") +#define rmb() asm volatile("dmb 1\n" : : : "memory") +#define wmb() asm volatile("dmb 2\n" : : : "memory") + +#else + +/* + * ARCompact based cores (ARC700) only have SYNC instruction which is super + * heavy weight as it flushes the pipeline as well. + * There are no real SMP implementations of such cores. + */ + +#define mb() asm volatile("sync\n" : : : "memory") + +#endif + +#include <asm-generic/barrier.h> + +#endif diff --git a/arch/arc/include/asm/bitops.h b/arch/arc/include/asm/bitops.h new file mode 100644 index 0000000000..f5a936496f --- /dev/null +++ b/arch/arc/include/asm/bitops.h @@ -0,0 +1,197 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef _ASM_BITOPS_H +#define _ASM_BITOPS_H + +#ifndef _LINUX_BITOPS_H +#error only <linux/bitops.h> can be included directly +#endif + +#ifndef __ASSEMBLY__ + +#include <linux/types.h> +#include <linux/compiler.h> + +#ifdef CONFIG_ISA_ARCOMPACT + +/* + * Count the number of zeros, starting from MSB + * Helper for fls( ) friends + * This is a pure count, so (1-32) or (0-31) doesn't apply + * It could be 0 to 32, based on num of 0's in there + * clz(0x8000_0000) = 0, clz(0xFFFF_FFFF)=0, clz(0) = 32, clz(1) = 31 + */ +static inline __attribute__ ((const)) int clz(unsigned int x) +{ + unsigned int res; + + __asm__ __volatile__( + " norm.f %0, %1 \n" + " mov.n %0, 0 \n" + " add.p %0, %0, 1 \n" + : "=r"(res) + : "r"(x) + : "cc"); + + return res; +} + +static inline int constant_fls(unsigned int x) +{ + int r = 32; + + if (!x) + return 0; + if (!(x & 0xffff0000u)) { + x <<= 16; + r -= 16; + } + if (!(x & 0xff000000u)) { + x <<= 8; + r -= 8; + } + if (!(x & 0xf0000000u)) { + x <<= 4; + r -= 4; + } + if (!(x & 0xc0000000u)) { + x <<= 2; + r -= 2; + } + if (!(x & 0x80000000u)) + r -= 1; + return r; +} + +/* + * fls = Find Last Set in word + * @result: [1-32] + * fls(1) = 1, fls(0x80000000) = 32, fls(0) = 0 + */ +static inline __attribute__ ((const)) int fls(unsigned int x) +{ + if (__builtin_constant_p(x)) + return constant_fls(x); + + return 32 - clz(x); +} + +/* + * __fls: Similar to fls, but zero based (0-31) + */ +static inline __attribute__ ((const)) unsigned long __fls(unsigned long x) +{ + if (!x) + return 0; + else + return fls(x) - 1; +} + +/* + * ffs = Find First Set in word (LSB to MSB) + * @result: [1-32], 0 if all 0's + */ +#define ffs(x) ({ unsigned long __t = (x); fls(__t & -__t); }) + +/* + * __ffs: Similar to ffs, but zero based (0-31) + */ +static inline __attribute__ ((const)) unsigned long __ffs(unsigned long word) +{ + if (!word) + return word; + + return ffs(word) - 1; +} + +#else /* CONFIG_ISA_ARCV2 */ + +/* + * fls = Find Last Set in word + * @result: [1-32] + * fls(1) = 1, fls(0x80000000) = 32, fls(0) = 0 + */ +static inline __attribute__ ((const)) int fls(unsigned int x) +{ + int n; + + asm volatile( + " fls.f %0, %1 \n" /* 0:31; 0(Z) if src 0 */ + " add.nz %0, %0, 1 \n" /* 0:31 -> 1:32 */ + : "=r"(n) /* Early clobber not needed */ + : "r"(x) + : "cc"); + + return n; +} + +/* + * __fls: Similar to fls, but zero based (0-31). Also 0 if no bit set + */ +static inline __attribute__ ((const)) unsigned long __fls(unsigned long x) +{ + /* FLS insn has exactly same semantics as the API */ + return __builtin_arc_fls(x); +} + +/* + * ffs = Find First Set in word (LSB to MSB) + * @result: [1-32], 0 if all 0's + */ +static inline __attribute__ ((const)) int ffs(unsigned int x) +{ + int n; + + asm volatile( + " ffs.f %0, %1 \n" /* 0:31; 31(Z) if src 0 */ + " add.nz %0, %0, 1 \n" /* 0:31 -> 1:32 */ + " mov.z %0, 0 \n" /* 31(Z)-> 0 */ + : "=r"(n) /* Early clobber not needed */ + : "r"(x) + : "cc"); + + return n; +} + +/* + * __ffs: Similar to ffs, but zero based (0-31) + */ +static inline __attribute__ ((const)) unsigned long __ffs(unsigned long x) +{ + unsigned long n; + + asm volatile( + " ffs.f %0, %1 \n" /* 0:31; 31(Z) if src 0 */ + " mov.z %0, 0 \n" /* 31(Z)-> 0 */ + : "=r"(n) + : "r"(x) + : "cc"); + + return n; + +} + +#endif /* CONFIG_ISA_ARCOMPACT */ + +/* + * ffz = Find First Zero in word. + * @return:[0-31], 32 if all 1's + */ +#define ffz(x) __ffs(~(x)) + +#include <asm-generic/bitops/hweight.h> +#include <asm-generic/bitops/fls64.h> +#include <asm-generic/bitops/sched.h> +#include <asm-generic/bitops/lock.h> +#include <asm-generic/bitops/atomic.h> +#include <asm-generic/bitops/non-atomic.h> + +#include <asm-generic/bitops/le.h> +#include <asm-generic/bitops/ext2-atomic-setbit.h> + +#endif /* !__ASSEMBLY__ */ + +#endif diff --git a/arch/arc/include/asm/bug.h b/arch/arc/include/asm/bug.h new file mode 100644 index 0000000000..4c453ba96c --- /dev/null +++ b/arch/arc/include/asm/bug.h @@ -0,0 +1,34 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef _ASM_ARC_BUG_H +#define _ASM_ARC_BUG_H + +#ifndef __ASSEMBLY__ + +#include <asm/ptrace.h> + +struct task_struct; + +void show_regs(struct pt_regs *regs); +void show_stacktrace(struct task_struct *tsk, struct pt_regs *regs, + const char *loglvl); +void show_kernel_fault_diag(const char *str, struct pt_regs *regs, + unsigned long address); +void die(const char *str, struct pt_regs *regs, unsigned long address); + +#define BUG() do { \ + pr_warn("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \ + barrier_before_unreachable(); \ + __builtin_trap(); \ +} while (0) + +#define HAVE_ARCH_BUG + +#include <asm-generic/bug.h> + +#endif /* !__ASSEMBLY__ */ + +#endif diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h new file mode 100644 index 0000000000..f0f1fc5d62 --- /dev/null +++ b/arch/arc/include/asm/cache.h @@ -0,0 +1,128 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef __ARC_ASM_CACHE_H +#define __ARC_ASM_CACHE_H + +/* In case $$ not config, setup a dummy number for rest of kernel */ +#ifndef CONFIG_ARC_CACHE_LINE_SHIFT +#define L1_CACHE_SHIFT 6 +#else +#define L1_CACHE_SHIFT CONFIG_ARC_CACHE_LINE_SHIFT +#endif + +#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) +#define CACHE_LINE_MASK (~(L1_CACHE_BYTES - 1)) + +/* + * ARC700 doesn't cache any access in top 1G (0xc000_0000 to 0xFFFF_FFFF) + * Ideal for wiring memory mapped peripherals as we don't need to do + * explicit uncached accesses (LD.di/ST.di) hence more portable drivers + */ +#define ARC_UNCACHED_ADDR_SPACE 0xc0000000 + +#ifndef __ASSEMBLY__ + +#include <linux/build_bug.h> + +/* Uncached access macros */ +#define arc_read_uncached_32(ptr) \ +({ \ + unsigned int __ret; \ + __asm__ __volatile__( \ + " ld.di %0, [%1] \n" \ + : "=r"(__ret) \ + : "r"(ptr)); \ + __ret; \ +}) + +#define arc_write_uncached_32(ptr, data)\ +({ \ + __asm__ __volatile__( \ + " st.di %0, [%1] \n" \ + : \ + : "r"(data), "r"(ptr)); \ +}) + +/* Largest line length for either L1 or L2 is 128 bytes */ +#define SMP_CACHE_BYTES 128 +#define cache_line_size() SMP_CACHE_BYTES +#define ARCH_DMA_MINALIGN SMP_CACHE_BYTES + +/* + * Make sure slab-allocated buffers are 64-bit aligned when atomic64_t uses + * ARCv2 64-bit atomics (LLOCKD/SCONDD). This guarantess runtime 64-bit + * alignment for any atomic64_t embedded in buffer. + * Default ARCH_SLAB_MINALIGN is __alignof__(long long) which has a relaxed + * value of 4 (and not 8) in ARC ABI. + */ +#if defined(CONFIG_ARC_HAS_LL64) && defined(CONFIG_ARC_HAS_LLSC) +#define ARCH_SLAB_MINALIGN 8 +#endif + +extern int ioc_enable; +extern unsigned long perip_base, perip_end; + +#endif /* !__ASSEMBLY__ */ + +/* Instruction cache related Auxiliary registers */ +#define ARC_REG_IC_BCR 0x77 /* Build Config reg */ +#define ARC_REG_IC_IVIC 0x10 +#define ARC_REG_IC_CTRL 0x11 +#define ARC_REG_IC_IVIR 0x16 +#define ARC_REG_IC_ENDR 0x17 +#define ARC_REG_IC_IVIL 0x19 +#define ARC_REG_IC_PTAG 0x1E +#define ARC_REG_IC_PTAG_HI 0x1F + +/* Bit val in IC_CTRL */ +#define IC_CTRL_DIS 0x1 + +/* Data cache related Auxiliary registers */ +#define ARC_REG_DC_BCR 0x72 /* Build Config reg */ +#define ARC_REG_DC_IVDC 0x47 +#define ARC_REG_DC_CTRL 0x48 +#define ARC_REG_DC_IVDL 0x4A +#define ARC_REG_DC_FLSH 0x4B +#define ARC_REG_DC_FLDL 0x4C +#define ARC_REG_DC_STARTR 0x4D +#define ARC_REG_DC_ENDR 0x4E +#define ARC_REG_DC_PTAG 0x5C +#define ARC_REG_DC_PTAG_HI 0x5F + +/* Bit val in DC_CTRL */ +#define DC_CTRL_DIS 0x001 +#define DC_CTRL_INV_MODE_FLUSH 0x040 +#define DC_CTRL_FLUSH_STATUS 0x100 +#define DC_CTRL_RGN_OP_INV 0x200 +#define DC_CTRL_RGN_OP_MSK 0x200 + +/*System-level cache (L2 cache) related Auxiliary registers */ +#define ARC_REG_SLC_CFG 0x901 +#define ARC_REG_SLC_CTRL 0x903 +#define ARC_REG_SLC_FLUSH 0x904 +#define ARC_REG_SLC_INVALIDATE 0x905 +#define ARC_AUX_SLC_IVDL 0x910 +#define ARC_AUX_SLC_FLDL 0x912 +#define ARC_REG_SLC_RGN_START 0x914 +#define ARC_REG_SLC_RGN_START1 0x915 +#define ARC_REG_SLC_RGN_END 0x916 +#define ARC_REG_SLC_RGN_END1 0x917 + +/* Bit val in SLC_CONTROL */ +#define SLC_CTRL_DIS 0x001 +#define SLC_CTRL_IM 0x040 +#define SLC_CTRL_BUSY 0x100 +#define SLC_CTRL_RGN_OP_INV 0x200 + +/* IO coherency related Auxiliary registers */ +#define ARC_REG_IO_COH_ENABLE 0x500 +#define ARC_IO_COH_ENABLE_BIT BIT(0) +#define ARC_REG_IO_COH_PARTIAL 0x501 +#define ARC_IO_COH_PARTIAL_BIT BIT(0) +#define ARC_REG_IO_COH_AP0_BASE 0x508 +#define ARC_REG_IO_COH_AP0_SIZE 0x509 + +#endif /* _ASM_CACHE_H */ diff --git a/arch/arc/include/asm/cacheflush.h b/arch/arc/include/asm/cacheflush.h new file mode 100644 index 0000000000..bd5b1a9a05 --- /dev/null +++ b/arch/arc/include/asm/cacheflush.h @@ -0,0 +1,111 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * vineetg: May 2011: for Non-aliasing VIPT D-cache following can be NOPs + * -flush_cache_dup_mm (fork) + * -likewise for flush_cache_mm (exit/execve) + * -likewise for flush_cache_{range,page} (munmap, exit, COW-break) + * + * vineetg: April 2008 + * -Added a critical CacheLine flush to copy_to_user_page( ) which + * was causing gdbserver to not setup breakpoints consistently + */ + +#ifndef _ASM_CACHEFLUSH_H +#define _ASM_CACHEFLUSH_H + +#include <linux/mm.h> +#include <asm/shmparam.h> + +void flush_cache_all(void); + +void flush_icache_range(unsigned long kstart, unsigned long kend); +void __sync_icache_dcache(phys_addr_t paddr, unsigned long vaddr, int len); +void __inv_icache_pages(phys_addr_t paddr, unsigned long vaddr, unsigned nr); +void __flush_dcache_pages(phys_addr_t paddr, unsigned long vaddr, unsigned nr); + +#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1 + +void flush_dcache_page(struct page *page); +void flush_dcache_folio(struct folio *folio); +#define flush_dcache_folio flush_dcache_folio + +void dma_cache_wback_inv(phys_addr_t start, unsigned long sz); +void dma_cache_inv(phys_addr_t start, unsigned long sz); +void dma_cache_wback(phys_addr_t start, unsigned long sz); + +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) + +/* TBD: optimize this */ +#define flush_cache_vmap(start, end) flush_cache_all() +#define flush_cache_vunmap(start, end) flush_cache_all() + +#define flush_cache_dup_mm(mm) /* called on fork (VIVT only) */ + +#ifndef CONFIG_ARC_CACHE_VIPT_ALIASING + +#define flush_cache_mm(mm) /* called on munmap/exit */ +#define flush_cache_range(mm, u_vstart, u_vend) +#define flush_cache_page(vma, u_vaddr, pfn) /* PF handling/COW-break */ + +#else /* VIPT aliasing dcache */ + +/* To clear out stale userspace mappings */ +void flush_cache_mm(struct mm_struct *mm); +void flush_cache_range(struct vm_area_struct *vma, + unsigned long start,unsigned long end); +void flush_cache_page(struct vm_area_struct *vma, + unsigned long user_addr, unsigned long page); + +/* + * To make sure that userspace mapping is flushed to memory before + * get_user_pages() uses a kernel mapping to access the page + */ +#define ARCH_HAS_FLUSH_ANON_PAGE +void flush_anon_page(struct vm_area_struct *vma, + struct page *page, unsigned long u_vaddr); + +#endif /* CONFIG_ARC_CACHE_VIPT_ALIASING */ + +/* + * A new pagecache page has PG_arch_1 clear - thus dcache dirty by default + * This works around some PIO based drivers which don't call flush_dcache_page + * to record that they dirtied the dcache + */ +#define PG_dc_clean PG_arch_1 + +#define CACHE_COLORS_NUM 4 +#define CACHE_COLORS_MSK (CACHE_COLORS_NUM - 1) +#define CACHE_COLOR(addr) (((unsigned long)(addr) >> (PAGE_SHIFT)) & CACHE_COLORS_MSK) + +/* + * Simple wrapper over config option + * Bootup code ensures that hardware matches kernel configuration + */ +static inline int cache_is_vipt_aliasing(void) +{ + return IS_ENABLED(CONFIG_ARC_CACHE_VIPT_ALIASING); +} + +/* + * checks if two addresses (after page aligning) index into same cache set + */ +#define addr_not_cache_congruent(addr1, addr2) \ +({ \ + cache_is_vipt_aliasing() ? \ + (CACHE_COLOR(addr1) != CACHE_COLOR(addr2)) : 0; \ +}) + +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ +do { \ + memcpy(dst, src, len); \ + if (vma->vm_flags & VM_EXEC) \ + __sync_icache_dcache((unsigned long)(dst), vaddr, len); \ +} while (0) + +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ + memcpy(dst, src, len); \ + +#endif diff --git a/arch/arc/include/asm/checksum.h b/arch/arc/include/asm/checksum.h new file mode 100644 index 0000000000..0b485800a3 --- /dev/null +++ b/arch/arc/include/asm/checksum.h @@ -0,0 +1,98 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * Joern Rennecke <joern.rennecke@embecosm.com>: Jan 2012 + * -Insn Scheduling improvements to csum core routines. + * = csum_fold( ) largely derived from ARM version. + * = ip_fast_cum( ) to have module scheduling + * -gcc 4.4.x broke networking. Alias analysis needed to be primed. + * worked around by adding memory clobber to ip_fast_csum( ) + * + * vineetg: May 2010 + * -Rewrote ip_fast_cscum( ) and csum_fold( ) with fast inline asm + */ + +#ifndef _ASM_ARC_CHECKSUM_H +#define _ASM_ARC_CHECKSUM_H + +/* + * Fold a partial checksum + * + * The 2 swords comprising the 32bit sum are added, any carry to 16th bit + * added back and final sword result inverted. + */ +static inline __sum16 csum_fold(__wsum s) +{ + unsigned int r = s << 16 | s >> 16; /* ror */ + s = ~s; + s -= r; + return s >> 16; +} + +/* + * This is a version of ip_compute_csum() optimized for IP headers, + * which always checksum on 4 octet boundaries. + */ +static inline __sum16 +ip_fast_csum(const void *iph, unsigned int ihl) +{ + const void *ptr = iph; + unsigned int tmp, tmp2, sum; + + __asm__( + " ld.ab %0, [%3, 4] \n" + " ld.ab %2, [%3, 4] \n" + " sub %1, %4, 2 \n" + " lsr.f lp_count, %1, 1 \n" + " bcc 0f \n" + " add.f %0, %0, %2 \n" + " ld.ab %2, [%3, 4] \n" + "0: lp 1f \n" + " ld.ab %1, [%3, 4] \n" + " adc.f %0, %0, %2 \n" + " ld.ab %2, [%3, 4] \n" + " adc.f %0, %0, %1 \n" + "1: adc.f %0, %0, %2 \n" + " add.cs %0,%0,1 \n" + : "=&r"(sum), "=r"(tmp), "=&r"(tmp2), "+&r" (ptr) + : "r"(ihl) + : "cc", "lp_count", "memory"); + + return csum_fold(sum); +} + +/* + * TCP pseudo Header is 12 bytes: + * SA [4], DA [4], zeroes [1], Proto[1], TCP Seg(hdr+data) Len [2] + */ +static inline __wsum +csum_tcpudp_nofold(__be32 saddr, __be32 daddr, __u32 len, + __u8 proto, __wsum sum) +{ + __asm__ __volatile__( + " add.f %0, %0, %1 \n" + " adc.f %0, %0, %2 \n" + " adc.f %0, %0, %3 \n" + " adc.f %0, %0, %4 \n" + " adc %0, %0, 0 \n" + : "+&r"(sum) + : "r"(saddr), "r"(daddr), +#ifdef CONFIG_CPU_BIG_ENDIAN + "r"(len), +#else + "r"(len << 8), +#endif + "r"(htons(proto)) + : "cc"); + + return sum; +} + +#define csum_fold csum_fold +#define ip_fast_csum ip_fast_csum +#define csum_tcpudp_nofold csum_tcpudp_nofold + +#include <asm-generic/checksum.h> + +#endif /* _ASM_ARC_CHECKSUM_H */ diff --git a/arch/arc/include/asm/cmpxchg.h b/arch/arc/include/asm/cmpxchg.h new file mode 100644 index 0000000000..e138fde067 --- /dev/null +++ b/arch/arc/include/asm/cmpxchg.h @@ -0,0 +1,143 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef __ASM_ARC_CMPXCHG_H +#define __ASM_ARC_CMPXCHG_H + +#include <linux/build_bug.h> +#include <linux/types.h> + +#include <asm/barrier.h> +#include <asm/smp.h> + +#ifdef CONFIG_ARC_HAS_LLSC + +/* + * if (*ptr == @old) + * *ptr = @new + */ +#define __cmpxchg(ptr, old, new) \ +({ \ + __typeof__(*(ptr)) _prev; \ + \ + __asm__ __volatile__( \ + "1: llock %0, [%1] \n" \ + " brne %0, %2, 2f \n" \ + " scond %3, [%1] \n" \ + " bnz 1b \n" \ + "2: \n" \ + : "=&r"(_prev) /* Early clobber prevent reg reuse */ \ + : "r"(ptr), /* Not "m": llock only supports reg */ \ + "ir"(old), \ + "r"(new) /* Not "ir": scond can't take LIMM */ \ + : "cc", \ + "memory"); /* gcc knows memory is clobbered */ \ + \ + _prev; \ +}) + +#define arch_cmpxchg_relaxed(ptr, old, new) \ +({ \ + __typeof__(ptr) _p_ = (ptr); \ + __typeof__(*(ptr)) _o_ = (old); \ + __typeof__(*(ptr)) _n_ = (new); \ + __typeof__(*(ptr)) _prev_; \ + \ + switch(sizeof((_p_))) { \ + case 4: \ + _prev_ = __cmpxchg(_p_, _o_, _n_); \ + break; \ + default: \ + BUILD_BUG(); \ + } \ + _prev_; \ +}) + +#else + +#define arch_cmpxchg(ptr, old, new) \ +({ \ + volatile __typeof__(ptr) _p_ = (ptr); \ + __typeof__(*(ptr)) _o_ = (old); \ + __typeof__(*(ptr)) _n_ = (new); \ + __typeof__(*(ptr)) _prev_; \ + unsigned long __flags; \ + \ + BUILD_BUG_ON(sizeof(_p_) != 4); \ + \ + /* \ + * spin lock/unlock provide the needed smp_mb() before/after \ + */ \ + atomic_ops_lock(__flags); \ + _prev_ = *_p_; \ + if (_prev_ == _o_) \ + *_p_ = _n_; \ + atomic_ops_unlock(__flags); \ + _prev_; \ +}) + +#endif + +/* + * xchg + */ +#ifdef CONFIG_ARC_HAS_LLSC + +#define __arch_xchg(ptr, val) \ +({ \ + __asm__ __volatile__( \ + " ex %0, [%1] \n" /* set new value */ \ + : "+r"(val) \ + : "r"(ptr) \ + : "memory"); \ + _val_; /* get old value */ \ +}) + +#define arch_xchg_relaxed(ptr, val) \ +({ \ + __typeof__(ptr) _p_ = (ptr); \ + __typeof__(*(ptr)) _val_ = (val); \ + \ + switch(sizeof(*(_p_))) { \ + case 4: \ + _val_ = __arch_xchg(_p_, _val_); \ + break; \ + default: \ + BUILD_BUG(); \ + } \ + _val_; \ +}) + +#else /* !CONFIG_ARC_HAS_LLSC */ + +/* + * EX instructions is baseline and present in !LLSC too. But in this + * regime it still needs use @atomic_ops_lock spinlock to allow interop + * with cmpxchg() which uses spinlock in !LLSC + * (llist.h use xchg and cmpxchg on sama data) + */ + +#define arch_xchg(ptr, val) \ +({ \ + __typeof__(ptr) _p_ = (ptr); \ + __typeof__(*(ptr)) _val_ = (val); \ + \ + unsigned long __flags; \ + \ + atomic_ops_lock(__flags); \ + \ + __asm__ __volatile__( \ + " ex %0, [%1] \n" \ + : "+r"(_val_) \ + : "r"(_p_) \ + : "memory"); \ + \ + atomic_ops_unlock(__flags); \ + _val_; \ +}) + +#endif + +#endif diff --git a/arch/arc/include/asm/current.h b/arch/arc/include/asm/current.h new file mode 100644 index 0000000000..06be89f6f2 --- /dev/null +++ b/arch/arc/include/asm/current.h @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * Vineetg: May 16th, 2008 + * - Current macro is now implemented as "global register" r25 + */ + +#ifndef _ASM_ARC_CURRENT_H +#define _ASM_ARC_CURRENT_H + +#ifndef __ASSEMBLY__ + +#ifdef CONFIG_ARC_CURR_IN_REG + +register struct task_struct *curr_arc asm("gp"); +#define current (curr_arc) + +#else +#include <asm-generic/current.h> +#endif /* ! CONFIG_ARC_CURR_IN_REG */ + +#endif /* ! __ASSEMBLY__ */ + +#endif /* _ASM_ARC_CURRENT_H */ diff --git a/arch/arc/include/asm/delay.h b/arch/arc/include/asm/delay.h new file mode 100644 index 0000000000..54db798f0a --- /dev/null +++ b/arch/arc/include/asm/delay.h @@ -0,0 +1,69 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * Delay routines using pre computed loops_per_jiffy value. + * + * vineetg: Feb 2012 + * -Rewrote in "C" to avoid dealing with availability of H/w MPY + * -Also reduced the num of MPY operations from 3 to 2 + * + * Amit Bhor: Codito Technologies 2004 + */ + +#ifndef __ASM_ARC_UDELAY_H +#define __ASM_ARC_UDELAY_H + +#include <asm-generic/types.h> +#include <asm/param.h> /* HZ */ + +extern unsigned long loops_per_jiffy; + +static inline void __delay(unsigned long loops) +{ + __asm__ __volatile__( + " mov lp_count, %0 \n" + " lp 1f \n" + " nop \n" + "1: \n" + : + : "r"(loops) + : "lp_count"); +} + +extern void __bad_udelay(void); + +/* + * Normal Math for computing loops in "N" usecs + * -we have precomputed @loops_per_jiffy + * -1 sec has HZ jiffies + * loops per "N" usecs = ((loops_per_jiffy * HZ / 1000000) * N) + * + * Approximate Division by multiplication: + * -Mathematically if we multiply and divide a number by same value the + * result remains unchanged: In this case, we use 2^32 + * -> (loops_per_N_usec * 2^32 ) / 2^32 + * -> (((loops_per_jiffy * HZ / 1000000) * N) * 2^32) / 2^32 + * -> (loops_per_jiffy * HZ * N * 4295) / 2^32 + * + * -Divide by 2^32 is very simply right shift by 32 + * -We simply need to ensure that the multiply per above eqn happens in + * 64-bit precision (if CPU doesn't support it - gcc can emaulate it) + */ + +static inline void __udelay(unsigned long usecs) +{ + unsigned long loops; + + /* (u64) cast ensures 64 bit MPY - real or emulated + * HZ * 4295 is pre-evaluated by gcc - hence only 2 mpy ops + */ + loops = ((u64) usecs * 4295 * HZ * loops_per_jiffy) >> 32; + + __delay(loops); +} + +#define udelay(n) (__builtin_constant_p(n) ? ((n) > 20000 ? __bad_udelay() \ + : __udelay(n)) : __udelay(n)) + +#endif /* __ASM_ARC_UDELAY_H */ diff --git a/arch/arc/include/asm/disasm.h b/arch/arc/include/asm/disasm.h new file mode 100644 index 0000000000..61fb4d7aff --- /dev/null +++ b/arch/arc/include/asm/disasm.h @@ -0,0 +1,113 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * several functions that help interpret ARC instructions + * used for unaligned accesses, kprobes and kgdb + * + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef __ARC_DISASM_H__ +#define __ARC_DISASM_H__ + +enum { + op_Bcc = 0, op_BLcc = 1, op_LD = 2, op_ST = 3, op_MAJOR_4 = 4, + op_MAJOR_5 = 5, op_LD_ADD = 12, op_ADD_SUB_SHIFT = 13, + op_ADD_MOV_CMP = 14, op_S = 15, op_LD_S = 16, op_LDB_S = 17, + op_LDW_S = 18, op_LDWX_S = 19, op_ST_S = 20, op_STB_S = 21, + op_STW_S = 22, op_Su5 = 23, op_SP = 24, op_GP = 25, + op_Pcl = 26, op_MOV_S = 27, op_ADD_CMP = 28, op_BR_S = 29, + op_B_S = 30, op_BL_S = 31 +}; + +enum flow { + noflow, + direct_jump, + direct_call, + indirect_jump, + indirect_call, + invalid_instr +}; + +#define IS_BIT(word, n) ((word) & (1<<n)) +#define BITS(word, s, e) (((word) >> (s)) & (~((-2) << ((e) - (s))))) + +#define MAJOR_OPCODE(word) (BITS((word), 27, 31)) +#define MINOR_OPCODE(word) (BITS((word), 16, 21)) +#define FIELD_A(word) (BITS((word), 0, 5)) +#define FIELD_B(word) ((BITS((word), 12, 14)<<3) | \ + (BITS((word), 24, 26))) +#define FIELD_C(word) (BITS((word), 6, 11)) +#define FIELD_u6(word) FIELDC(word) +#define FIELD_s12(word) sign_extend(((BITS((word), 0, 5) << 6) | \ + BITS((word), 6, 11)), 12) + +/* note that for BL/BRcc these two macro's need another AND statement to mask + * out bit 1 (make the result a multiple of 4) */ +#define FIELD_s9(word) sign_extend(((BITS(word, 15, 15) << 8) | \ + BITS(word, 16, 23)), 9) +#define FIELD_s21(word) sign_extend(((BITS(word, 6, 15) << 11) | \ + (BITS(word, 17, 26) << 1)), 12) +#define FIELD_s25(word) sign_extend(((BITS(word, 0, 3) << 21) | \ + (BITS(word, 6, 15) << 11) | \ + (BITS(word, 17, 26) << 1)), 12) + +/* note: these operate on 16 bits! */ +#define FIELD_S_A(word) ((BITS((word), 2, 2)<<3) | BITS((word), 0, 2)) +#define FIELD_S_B(word) ((BITS((word), 10, 10)<<3) | \ + BITS((word), 8, 10)) +#define FIELD_S_C(word) ((BITS((word), 7, 7)<<3) | BITS((word), 5, 7)) +#define FIELD_S_H(word) ((BITS((word), 0, 2)<<3) | BITS((word), 5, 8)) +#define FIELD_S_u5(word) (BITS((word), 0, 4)) +#define FIELD_S_u6(word) (BITS((word), 0, 4) << 1) +#define FIELD_S_u7(word) (BITS((word), 0, 4) << 2) +#define FIELD_S_u10(word) (BITS((word), 0, 7) << 2) +#define FIELD_S_s7(word) sign_extend(BITS((word), 0, 5) << 1, 9) +#define FIELD_S_s8(word) sign_extend(BITS((word), 0, 7) << 1, 9) +#define FIELD_S_s9(word) sign_extend(BITS((word), 0, 8), 9) +#define FIELD_S_s10(word) sign_extend(BITS((word), 0, 8) << 1, 10) +#define FIELD_S_s11(word) sign_extend(BITS((word), 0, 8) << 2, 11) +#define FIELD_S_s13(word) sign_extend(BITS((word), 0, 10) << 2, 13) + +#define STATUS32_L 0x00000100 +#define REG_LIMM 62 + +struct disasm_state { + /* generic info */ + unsigned long words[2]; + int instr_len; + int major_opcode; + /* info for branch/jump */ + int is_branch; + int target; + int delay_slot; + enum flow flow; + /* info for load/store */ + int src1, src2, src3, dest, wb_reg; + int zz, aa, x, pref, di; + int fault, write; +}; + +static inline int sign_extend(int value, int bits) +{ + if (IS_BIT(value, (bits - 1))) + value |= (0xffffffff << bits); + + return value; +} + +static inline int is_short_instr(unsigned long addr) +{ + uint16_t word = *((uint16_t *)addr); + int opcode = (word >> 11) & 0x1F; + return (opcode >= 0x0B); +} + +void disasm_instr(unsigned long addr, struct disasm_state *state, + int userspace, struct pt_regs *regs, struct callee_regs *cregs); +int disasm_next_pc(unsigned long pc, struct pt_regs *regs, struct callee_regs + *cregs, unsigned long *fall_thru, unsigned long *target); +long get_reg(int reg, struct pt_regs *regs, struct callee_regs *cregs); +void set_reg(int reg, long val, struct pt_regs *regs, + struct callee_regs *cregs); + +#endif /* __ARC_DISASM_H__ */ diff --git a/arch/arc/include/asm/dma.h b/arch/arc/include/asm/dma.h new file mode 100644 index 0000000000..02431027ed --- /dev/null +++ b/arch/arc/include/asm/dma.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef ASM_ARC_DMA_H +#define ASM_ARC_DMA_H + +#define MAX_DMA_ADDRESS 0xC0000000 + +#endif diff --git a/arch/arc/include/asm/dsp-impl.h b/arch/arc/include/asm/dsp-impl.h new file mode 100644 index 0000000000..cd5636dfeb --- /dev/null +++ b/arch/arc/include/asm/dsp-impl.h @@ -0,0 +1,152 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2020 Synopsys, Inc. (www.synopsys.com) + * + * Author: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> + */ +#ifndef __ASM_ARC_DSP_IMPL_H +#define __ASM_ARC_DSP_IMPL_H + +#include <asm/dsp.h> + +#define DSP_CTRL_DISABLED_ALL 0 + +#ifdef __ASSEMBLY__ + +/* clobbers r5 register */ +.macro DSP_EARLY_INIT +#ifdef CONFIG_ISA_ARCV2 + lr r5, [ARC_AUX_DSP_BUILD] + bmsk r5, r5, 7 + breq r5, 0, 1f + mov r5, DSP_CTRL_DISABLED_ALL + sr r5, [ARC_AUX_DSP_CTRL] +1: +#endif +.endm + +/* clobbers r10, r11 registers pair */ +.macro DSP_SAVE_REGFILE_IRQ +#if defined(CONFIG_ARC_DSP_KERNEL) + /* + * Drop any changes to DSP_CTRL made by userspace so userspace won't be + * able to break kernel - reset it to DSP_CTRL_DISABLED_ALL value + */ + mov r10, DSP_CTRL_DISABLED_ALL + sr r10, [ARC_AUX_DSP_CTRL] + +#elif defined(CONFIG_ARC_DSP_SAVE_RESTORE_REGS) + /* + * Save DSP_CTRL register and reset it to value suitable for kernel + * (DSP_CTRL_DISABLED_ALL) + */ + mov r10, DSP_CTRL_DISABLED_ALL + aex r10, [ARC_AUX_DSP_CTRL] + st r10, [sp, PT_DSP_CTRL] + +#endif +.endm + +/* clobbers r10, r11 registers pair */ +.macro DSP_RESTORE_REGFILE_IRQ +#if defined(CONFIG_ARC_DSP_SAVE_RESTORE_REGS) + ld r10, [sp, PT_DSP_CTRL] + sr r10, [ARC_AUX_DSP_CTRL] + +#endif +.endm + +#else /* __ASEMBLY__ */ + +#include <linux/sched.h> +#include <asm/asserts.h> +#include <asm/switch_to.h> + +#ifdef CONFIG_ARC_DSP_SAVE_RESTORE_REGS + +/* + * As we save new and restore old AUX register value in the same place we + * can optimize a bit and use AEX instruction (swap contents of an auxiliary + * register with a core register) instead of LR + SR pair. + */ +#define AUX_SAVE_RESTORE(_saveto, _readfrom, _offt, _aux) \ +do { \ + long unsigned int _scratch; \ + \ + __asm__ __volatile__( \ + "ld %0, [%2, %4] \n" \ + "aex %0, [%3] \n" \ + "st %0, [%1, %4] \n" \ + : \ + "=&r" (_scratch) /* must be early clobber */ \ + : \ + "r" (_saveto), \ + "r" (_readfrom), \ + "Ir" (_aux), \ + "Ir" (_offt) \ + : \ + "memory" \ + ); \ +} while (0) + +#define DSP_AUX_SAVE_RESTORE(_saveto, _readfrom, _aux) \ + AUX_SAVE_RESTORE(_saveto, _readfrom, \ + offsetof(struct dsp_callee_regs, _aux), \ + ARC_AUX_##_aux) + +static inline void dsp_save_restore(struct task_struct *prev, + struct task_struct *next) +{ + long unsigned int *saveto = &prev->thread.dsp.ACC0_GLO; + long unsigned int *readfrom = &next->thread.dsp.ACC0_GLO; + + DSP_AUX_SAVE_RESTORE(saveto, readfrom, ACC0_GLO); + DSP_AUX_SAVE_RESTORE(saveto, readfrom, ACC0_GHI); + + DSP_AUX_SAVE_RESTORE(saveto, readfrom, DSP_BFLY0); + DSP_AUX_SAVE_RESTORE(saveto, readfrom, DSP_FFT_CTRL); + +#ifdef CONFIG_ARC_DSP_AGU_USERSPACE + DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_AP0); + DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_AP1); + DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_AP2); + DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_AP3); + + DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_OS0); + DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_OS1); + + DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_MOD0); + DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_MOD1); + DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_MOD2); + DSP_AUX_SAVE_RESTORE(saveto, readfrom, AGU_MOD3); +#endif /* CONFIG_ARC_DSP_AGU_USERSPACE */ +} + +#else /* !CONFIG_ARC_DSP_SAVE_RESTORE_REGS */ +#define dsp_save_restore(p, n) +#endif /* CONFIG_ARC_DSP_SAVE_RESTORE_REGS */ + +static inline bool dsp_exist(void) +{ + struct bcr_generic bcr; + + READ_BCR(ARC_AUX_DSP_BUILD, bcr); + return !!bcr.ver; +} + +static inline bool agu_exist(void) +{ + struct bcr_generic bcr; + + READ_BCR(ARC_AUX_AGU_BUILD, bcr); + return !!bcr.ver; +} + +static inline void dsp_config_check(void) +{ + CHK_OPT_STRICT(CONFIG_ARC_DSP_HANDLED, dsp_exist()); + CHK_OPT_WEAK(CONFIG_ARC_DSP_AGU_USERSPACE, agu_exist()); +} + +#endif /* __ASEMBLY__ */ +#endif /* __ASM_ARC_DSP_IMPL_H */ diff --git a/arch/arc/include/asm/dsp.h b/arch/arc/include/asm/dsp.h new file mode 100644 index 0000000000..202c78e567 --- /dev/null +++ b/arch/arc/include/asm/dsp.h @@ -0,0 +1,29 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2020 Synopsys, Inc. (www.synopsys.com) + * + * Author: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> + */ +#ifndef __ASM_ARC_DSP_H +#define __ASM_ARC_DSP_H + +#ifndef __ASSEMBLY__ + +/* + * DSP-related saved registers - need to be saved only when you are + * scheduled out. + * structure fields name must correspond to aux register defenitions for + * automatic offset calculation in DSP_AUX_SAVE_RESTORE macros + */ +struct dsp_callee_regs { + unsigned long ACC0_GLO, ACC0_GHI, DSP_BFLY0, DSP_FFT_CTRL; +#ifdef CONFIG_ARC_DSP_AGU_USERSPACE + unsigned long AGU_AP0, AGU_AP1, AGU_AP2, AGU_AP3; + unsigned long AGU_OS0, AGU_OS1; + unsigned long AGU_MOD0, AGU_MOD1, AGU_MOD2, AGU_MOD3; +#endif +}; + +#endif /* !__ASSEMBLY__ */ + +#endif /* __ASM_ARC_DSP_H */ diff --git a/arch/arc/include/asm/dwarf.h b/arch/arc/include/asm/dwarf.h new file mode 100644 index 0000000000..a0d5ebe1bc --- /dev/null +++ b/arch/arc/include/asm/dwarf.h @@ -0,0 +1,43 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2016-17 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef _ASM_ARC_DWARF_H +#define _ASM_ARC_DWARF_H + +#ifdef __ASSEMBLY__ + +#ifdef ARC_DW2_UNWIND_AS_CFI + +#define CFI_STARTPROC .cfi_startproc +#define CFI_ENDPROC .cfi_endproc +#define CFI_DEF_CFA .cfi_def_cfa +#define CFI_DEF_CFA_OFFSET .cfi_def_cfa_offset +#define CFI_DEF_CFA_REGISTER .cfi_def_cfa_register +#define CFI_OFFSET .cfi_offset +#define CFI_REL_OFFSET .cfi_rel_offset +#define CFI_REGISTER .cfi_register +#define CFI_RESTORE .cfi_restore +#define CFI_UNDEFINED .cfi_undefined + +#else + +#define CFI_IGNORE # + +#define CFI_STARTPROC CFI_IGNORE +#define CFI_ENDPROC CFI_IGNORE +#define CFI_DEF_CFA CFI_IGNORE +#define CFI_DEF_CFA_OFFSET CFI_IGNORE +#define CFI_DEF_CFA_REGISTER CFI_IGNORE +#define CFI_OFFSET CFI_IGNORE +#define CFI_REL_OFFSET CFI_IGNORE +#define CFI_REGISTER CFI_IGNORE +#define CFI_RESTORE CFI_IGNORE +#define CFI_UNDEFINED CFI_IGNORE + +#endif /* !ARC_DW2_UNWIND_AS_CFI */ + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_ARC_DWARF_H */ diff --git a/arch/arc/include/asm/elf.h b/arch/arc/include/asm/elf.h new file mode 100644 index 0000000000..0284ace0e1 --- /dev/null +++ b/arch/arc/include/asm/elf.h @@ -0,0 +1,72 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef __ASM_ARC_ELF_H +#define __ASM_ARC_ELF_H + +#include <linux/types.h> +#include <linux/elf-em.h> +#include <uapi/asm/elf.h> + +#define EM_ARC_INUSE (IS_ENABLED(CONFIG_ISA_ARCOMPACT) ? \ + EM_ARCOMPACT : EM_ARCV2) + +/* ARC Relocations (kernel Modules only) */ +#define R_ARC_32 0x4 +#define R_ARC_32_ME 0x1B +#define R_ARC_32_PCREL 0x31 + +/*to set parameters in the core dumps */ +#define ELF_ARCH EM_ARC_INUSE +#define ELF_CLASS ELFCLASS32 + +#ifdef CONFIG_CPU_BIG_ENDIAN +#define ELF_DATA ELFDATA2MSB +#else +#define ELF_DATA ELFDATA2LSB +#endif + +/* + * To ensure that + * -we don't load something for the wrong architecture. + * -The userspace is using the correct syscall ABI + */ +struct elf32_hdr; +extern int elf_check_arch(const struct elf32_hdr *); +#define elf_check_arch elf_check_arch + +#define CORE_DUMP_USE_REGSET + +#define ELF_EXEC_PAGESIZE PAGE_SIZE + +/* + * This is the location that an ET_DYN program is loaded if exec'ed. Typical + * use of this is to invoke "./ld.so someprog" to test out a new version of + * the loader. We need to make sure that it is out of the way of the program + * that it will "exec", and that there is sufficient room for the brk. + */ +#define ELF_ET_DYN_BASE (2UL * TASK_SIZE / 3) + +/* + * When the program starts, a1 contains a pointer to a function to be + * registered with atexit, as per the SVR4 ABI. A value of 0 means we + * have no such handler. + */ +#define ELF_PLAT_INIT(_r, load_addr) ((_r)->r0 = 0) + +/* + * This yields a mask that user programs can use to figure out what + * instruction set this cpu supports. + */ +#define ELF_HWCAP (0) + +/* + * This yields a string that ld.so will use to load implementation + * specific libraries for optimization. This is more specific in + * intent than poking at uname or /proc/cpuinfo. + */ +#define ELF_PLATFORM (NULL) + +#endif diff --git a/arch/arc/include/asm/entry-arcv2.h b/arch/arc/include/asm/entry-arcv2.h new file mode 100644 index 0000000000..4d13320e0c --- /dev/null +++ b/arch/arc/include/asm/entry-arcv2.h @@ -0,0 +1,294 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef __ASM_ARC_ENTRY_ARCV2_H +#define __ASM_ARC_ENTRY_ARCV2_H + +#include <asm/asm-offsets.h> +#include <asm/dsp-impl.h> +#include <asm/irqflags-arcv2.h> +#include <asm/thread_info.h> /* For THREAD_SIZE */ + +/* + * Interrupt/Exception stack layout (pt_regs) for ARCv2 + * (End of struct aligned to end of page [unless nested]) + * + * INTERRUPT EXCEPTION + * + * manual --------------------- manual + * | orig_r0 | + * | event/ECR | + * | bta | + * | gp | + * | fp | + * | sp | + * | r12 | + * | r30 | + * | r58 | + * | r59 | + * hw autosave --------------------- + * optional | r0 | + * | r1 | + * ~ ~ + * | r9 | + * | r10 | + * | r11 | + * | blink | + * | lpe | + * | lps | + * | lpc | + * | ei base | + * | ldi base | + * | jli base | + * --------------------- + * hw autosave | pc / eret | + * mandatory | stat32 / erstatus | + * --------------------- + */ + +/*------------------------------------------------------------------------*/ +.macro INTERRUPT_PROLOGUE + + ; Before jumping to Interrupt Vector, hardware micro-ops did following: + ; 1. SP auto-switched to kernel mode stack + ; 2. STATUS32.Z flag set if in U mode at time of interrupt (U:1,K:0) + ; 3. Auto save: (mandatory) Push PC and STAT32 on stack + ; hardware does even if CONFIG_ARC_IRQ_NO_AUTOSAVE + ; 4a. Auto save: (optional) r0-r11, blink, LPE,LPS,LPC, JLI,LDI,EI + ; + ; Now + ; 4b. If Auto-save (optional) not enabled in hw, manually save them + ; 5. Manually save: r12,r30, sp,fp,gp, ACCL pair + ; + ; At the end, SP points to pt_regs + +#ifdef CONFIG_ARC_IRQ_NO_AUTOSAVE + ; carve pt_regs on stack (case #3), PC/STAT32 already on stack + sub sp, sp, SZ_PT_REGS - 8 + + __SAVE_REGFILE_HARD +#else + ; carve pt_regs on stack (case #4), which grew partially already + sub sp, sp, PT_r0 +#endif + + __SAVE_REGFILE_SOFT +.endm + +/*------------------------------------------------------------------------*/ +.macro EXCEPTION_PROLOGUE_KEEP_AE + + ; Before jumping to Exception Vector, hardware micro-ops did following: + ; 1. SP auto-switched to kernel mode stack + ; 2. STATUS32.Z flag set if in U mode at time of exception (U:1,K:0) + ; + ; Now manually save rest of reg file + ; At the end, SP points to pt_regs + + sub sp, sp, SZ_PT_REGS ; carve space for pt_regs + + ; _HARD saves r10 clobbered by _SOFT as scratch hence comes first + + __SAVE_REGFILE_HARD + __SAVE_REGFILE_SOFT + + st r0, [sp] ; orig_r0 + + lr r10, [eret] + lr r11, [erstatus] + ST2 r10, r11, PT_ret + + lr r10, [ecr] + lr r11, [erbta] + ST2 r10, r11, PT_event + + ; OUTPUT: r10 has ECR expected by EV_Trap +.endm + +.macro EXCEPTION_PROLOGUE + + EXCEPTION_PROLOGUE_KEEP_AE ; return ECR in r10 + + lr r0, [efa] + mov r1, sp + + FAKE_RET_FROM_EXCPN ; clobbers r9 +.endm + +/*------------------------------------------------------------------------ + * This macro saves the registers manually which would normally be autosaved + * by hardware on taken interrupts. It is used by + * - exception handlers (which don't have autosave) + * - interrupt autosave disabled due to CONFIG_ARC_IRQ_NO_AUTOSAVE + */ +.macro __SAVE_REGFILE_HARD + + ST2 r0, r1, PT_r0 + ST2 r2, r3, PT_r2 + ST2 r4, r5, PT_r4 + ST2 r6, r7, PT_r6 + ST2 r8, r9, PT_r8 + ST2 r10, r11, PT_r10 + + st blink, [sp, PT_blink] + + lr r10, [lp_end] + lr r11, [lp_start] + ST2 r10, r11, PT_lpe + + st lp_count, [sp, PT_lpc] + + ; skip JLI, LDI, EI for now +.endm + +/*------------------------------------------------------------------------ + * This macros saves a bunch of other registers which can't be autosaved for + * various reasons: + * - r12: the last caller saved scratch reg since hardware saves in pairs so r0-r11 + * - r30: free reg, used by gcc as scratch + * - ACCL/ACCH pair when they exist + */ +.macro __SAVE_REGFILE_SOFT + + st fp, [sp, PT_fp] ; r27 + st r30, [sp, PT_r30] + st r12, [sp, PT_r12] + st r26, [sp, PT_r26] ; gp + + ; Saving pt_regs->sp correctly requires some extra work due to the way + ; Auto stack switch works + ; - U mode: retrieve it from AUX_USER_SP + ; - K mode: add the offset from current SP where H/w starts auto push + ; + ; 1. Utilize the fact that Z bit is set if Intr taken in U mode + ; 2. Upon entry SP is always saved (for any inspection, unwinding etc), + ; but on return, restored only if U mode + + lr r10, [AUX_USER_SP] ; U mode SP + + ; ISA requires ADD.nz to have same dest and src reg operands + mov.nz r10, sp + add2.nz r10, r10, SZ_PT_REGS/4 ; K mode SP + + st r10, [sp, PT_sp] ; SP (pt_regs->sp) + +#ifdef CONFIG_ARC_HAS_ACCL_REGS + ST2 r58, r59, PT_r58 +#endif + + /* clobbers r10, r11 registers pair */ + DSP_SAVE_REGFILE_IRQ + +#ifdef CONFIG_ARC_CURR_IN_REG + GET_CURR_TASK_ON_CPU gp +#endif + +.endm + +/*------------------------------------------------------------------------*/ +.macro __RESTORE_REGFILE_SOFT + + ld fp, [sp, PT_fp] + ld r30, [sp, PT_r30] + ld r12, [sp, PT_r12] + ld r26, [sp, PT_r26] + + ; Restore SP (into AUX_USER_SP) only if returning to U mode + ; - for K mode, it will be implicitly restored as stack is unwound + ; - Z flag set on K is inverse of what hardware does on interrupt entry + ; but that doesn't really matter + bz 1f + + ld r10, [sp, PT_sp] ; SP (pt_regs->sp) + sr r10, [AUX_USER_SP] +1: + + /* clobbers r10, r11 registers pair */ + DSP_RESTORE_REGFILE_IRQ + +#ifdef CONFIG_ARC_HAS_ACCL_REGS + LD2 r58, r59, PT_r58 +#endif +.endm + +/*------------------------------------------------------------------------*/ +.macro __RESTORE_REGFILE_HARD + + ld blink, [sp, PT_blink] + + LD2 r10, r11, PT_lpe + sr r10, [lp_end] + sr r11, [lp_start] + + ld r10, [sp, PT_lpc] ; lp_count can't be target of LD + mov lp_count, r10 + + LD2 r0, r1, PT_r0 + LD2 r2, r3, PT_r2 + LD2 r4, r5, PT_r4 + LD2 r6, r7, PT_r6 + LD2 r8, r9, PT_r8 + LD2 r10, r11, PT_r10 +.endm + + +/*------------------------------------------------------------------------*/ +.macro INTERRUPT_EPILOGUE + + ; INPUT: r0 has STAT32 of calling context + ; INPUT: Z flag set if returning to K mode + + ; _SOFT clobbers r10 restored by _HARD hence the order + + __RESTORE_REGFILE_SOFT + +#ifdef CONFIG_ARC_IRQ_NO_AUTOSAVE + __RESTORE_REGFILE_HARD + + ; SP points to PC/STAT32: hw restores them despite NO_AUTOSAVE + add sp, sp, SZ_PT_REGS - 8 +#else + add sp, sp, PT_r0 +#endif + +.endm + +/*------------------------------------------------------------------------*/ +.macro EXCEPTION_EPILOGUE + + ; INPUT: r0 has STAT32 of calling context + + btst r0, STATUS_U_BIT ; Z flag set if K, used in restoring SP + + ld r10, [sp, PT_bta] + sr r10, [erbta] + + LD2 r10, r11, PT_ret + sr r10, [eret] + sr r11, [erstatus] + + __RESTORE_REGFILE_SOFT + __RESTORE_REGFILE_HARD + + add sp, sp, SZ_PT_REGS +.endm + +.macro FAKE_RET_FROM_EXCPN + lr r9, [status32] + bclr r9, r9, STATUS_AE_BIT + bset r9, r9, STATUS_IE_BIT + kflag r9 +.endm + +/* Get thread_info of "current" tsk */ +.macro GET_CURR_THR_INFO_FROM_SP reg + bmskn \reg, sp, THREAD_SHIFT - 1 +.endm + +/* Get CPU-ID of this core */ +.macro GET_CPU_ID reg + lr \reg, [identity] + xbfu \reg, \reg, 0xE8 /* 00111 01000 */ + /* M = 8-1 N = 8 */ +.endm + +#endif diff --git a/arch/arc/include/asm/entry-compact.h b/arch/arc/include/asm/entry-compact.h new file mode 100644 index 0000000000..a0e760eb35 --- /dev/null +++ b/arch/arc/include/asm/entry-compact.h @@ -0,0 +1,302 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * Vineetg: March 2009 (Supporting 2 levels of Interrupts) + * Stack switching code can no longer reliably rely on the fact that + * if we are NOT in user mode, stack is switched to kernel mode. + * e.g. L2 IRQ interrupted a L1 ISR which had not yet completed + * it's prologue including stack switching from user mode + * + * Vineetg: Aug 28th 2008: Bug #94984 + * -Zero Overhead Loop Context shd be cleared when entering IRQ/EXcp/Trap + * Normally CPU does this automatically, however when doing FAKE rtie, + * we also need to explicitly do this. The problem in macros + * FAKE_RET_FROM_EXCPN and FAKE_RET_FROM_EXCPN_LOCK_IRQ was that this bit + * was being "CLEARED" rather then "SET". Actually "SET" clears ZOL context + * + * Vineetg: May 5th 2008 + * -Modified CALLEE_REG save/restore macros to handle the fact that + * r25 contains the kernel current task ptr + * - Defined Stack Switching Macro to be reused in all intr/excp hdlrs + * - Shaved off 11 instructions from RESTORE_ALL_INT1 by using the + * address Write back load ld.ab instead of separate ld/add instn + * + * Amit Bhor, Sameer Dhavale: Codito Technologies 2004 + */ + +#ifndef __ASM_ARC_ENTRY_COMPACT_H +#define __ASM_ARC_ENTRY_COMPACT_H + +#include <asm/asm-offsets.h> +#include <asm/irqflags-compact.h> +#include <asm/thread_info.h> /* For THREAD_SIZE */ + +/*-------------------------------------------------------------- + * Switch to Kernel Mode stack if SP points to User Mode stack + * + * Entry : r9 contains pre-IRQ/exception/trap status32 + * Exit : SP set to K mode stack + * SP at the time of entry (K/U) saved @ pt_regs->sp + * Clobbers: r9 + *-------------------------------------------------------------*/ + +.macro SWITCH_TO_KERNEL_STK + + /* User Mode when this happened ? Yes: Proceed to switch stack */ + bbit1 r9, STATUS_U_BIT, 88f + + /* OK we were already in kernel mode when this event happened, thus can + * assume SP is kernel mode SP. _NO_ need to do any stack switching + */ + +#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS + /* However.... + * If Level 2 Interrupts enabled, we may end up with a corner case: + * 1. User Task executing + * 2. L1 IRQ taken, ISR starts (CPU auto-switched to KERNEL mode) + * 3. But before it could switch SP from USER to KERNEL stack + * a L2 IRQ "Interrupts" L1 + * Thay way although L2 IRQ happened in Kernel mode, stack is still + * not switched. + * To handle this, we may need to switch stack even if in kernel mode + * provided SP has values in range of USER mode stack ( < 0x7000_0000 ) + */ + brlo sp, VMALLOC_START, 88f + + /* TODO: vineetg: + * We need to be a bit more cautious here. What if a kernel bug in + * L1 ISR, caused SP to go whaco (some small value which looks like + * USER stk) and then we take L2 ISR. + * Above brlo alone would treat it as a valid L1-L2 scenario + * instead of shouting around + * The only feasible way is to make sure this L2 happened in + * L1 prelogue ONLY i.e. ilink2 is less than a pre-set marker in + * L1 ISR before it switches stack + */ + +#endif + + /*------Intr/Ecxp happened in kernel mode, SP already setup ------ */ + /* save it nevertheless @ pt_regs->sp for uniformity */ + + b.d 66f + st sp, [sp, PT_sp - SZ_PT_REGS] + +88: /*------Intr/Ecxp happened in user mode, "switch" stack ------ */ + + GET_CURR_TASK_ON_CPU r9 + + /* With current tsk in r9, get it's kernel mode stack base */ + GET_TSK_STACK_BASE r9, r9 + + /* save U mode SP @ pt_regs->sp */ + st sp, [r9, PT_sp - SZ_PT_REGS] + + /* final SP switch */ + mov sp, r9 +66: +.endm + +/*------------------------------------------------------------ + * "FAKE" a rtie to return from CPU Exception context + * This is to re-enable Exceptions within exception + * Look at EV_ProtV to see how this is actually used + *-------------------------------------------------------------*/ + +.macro FAKE_RET_FROM_EXCPN + + lr r9, [status32] + bclr r9, r9, STATUS_AE_BIT + or r9, r9, (STATUS_E1_MASK|STATUS_E2_MASK) + sr r9, [erstatus] + mov r9, 55f + sr r9, [eret] + rtie +55: +.endm + +/*-------------------------------------------------------------- + * For early Exception/ISR Prologue, a core reg is temporarily needed to + * code the rest of prolog (stack switching). This is done by stashing + * it to memory (non-SMP case) or SCRATCH0 Aux Reg (SMP). + * + * Before saving the full regfile - this reg is restored back, only + * to be saved again on kernel mode stack, as part of pt_regs. + *-------------------------------------------------------------*/ +.macro PROLOG_FREEUP_REG reg, mem + st \reg, [\mem] +.endm + +.macro PROLOG_RESTORE_REG reg, mem + ld \reg, [\mem] +.endm + +/*-------------------------------------------------------------- + * Exception Entry prologue + * -Switches stack to K mode (if not already) + * -Saves the register file + * + * After this it is safe to call the "C" handlers + *-------------------------------------------------------------*/ +.macro EXCEPTION_PROLOGUE_KEEP_AE + + /* Need at least 1 reg to code the early exception prologue */ + PROLOG_FREEUP_REG r9, @ex_saved_reg1 + + /* U/K mode at time of exception (stack not switched if already K) */ + lr r9, [erstatus] + + /* ARC700 doesn't provide auto-stack switching */ + SWITCH_TO_KERNEL_STK + + st.a r0, [sp, -8] /* orig_r0 needed for syscall (skip ECR slot) */ + sub sp, sp, 4 /* skip pt_regs->sp, already saved above */ + + /* Restore r9 used to code the early prologue */ + PROLOG_RESTORE_REG r9, @ex_saved_reg1 + + /* now we are ready to save the regfile */ + SAVE_R0_TO_R12 + PUSH gp + PUSH fp + PUSH blink + PUSHAX eret + PUSHAX erstatus + PUSH lp_count + PUSHAX lp_end + PUSHAX lp_start + PUSHAX erbta + + lr r10, [ecr] + st r10, [sp, PT_event] + +#ifdef CONFIG_ARC_CURR_IN_REG + /* gp already saved on stack: now load with "current" */ + GET_CURR_TASK_ON_CPU gp +#endif + ; OUTPUT: r10 has ECR expected by EV_Trap +.endm + +.macro EXCEPTION_PROLOGUE + + EXCEPTION_PROLOGUE_KEEP_AE ; return ECR in r10 + + lr r0, [efa] + mov r1, sp + + FAKE_RET_FROM_EXCPN ; clobbers r9 +.endm + +/*-------------------------------------------------------------- + * Restore all registers used by system call or Exceptions + * SP should always be pointing to the next free stack element + * when entering this macro. + * + * NOTE: + * + * It is recommended that lp_count/ilink1/ilink2 not be used as a dest reg + * for memory load operations. If used in that way interrupts are deffered + * by hardware and that is not good. + *-------------------------------------------------------------*/ +.macro EXCEPTION_EPILOGUE + + POPAX erbta + POPAX lp_start + POPAX lp_end + + POP r9 + mov lp_count, r9 ;LD to lp_count is not allowed + + POPAX erstatus + POPAX eret + POP blink + POP fp + POP gp + RESTORE_R12_TO_R0 + + ld sp, [sp] /* restore original sp */ + /* orig_r0, ECR skipped automatically */ +.endm + +/* Dummy ECR values for Interrupts */ +#define event_IRQ1 0x0031abcd +#define event_IRQ2 0x0032abcd + +.macro INTERRUPT_PROLOGUE LVL + + /* free up r9 as scratchpad */ + PROLOG_FREEUP_REG r9, @int\LVL\()_saved_reg + + /* Which mode (user/kernel) was the system in when intr occurred */ + lr r9, [status32_l\LVL\()] + + SWITCH_TO_KERNEL_STK + + + PUSH 0x003\LVL\()abcd /* Dummy ECR */ + sub sp, sp, 8 /* skip orig_r0 (not needed) + skip pt_regs->sp, already saved above */ + + /* Restore r9 used to code the early prologue */ + PROLOG_RESTORE_REG r9, @int\LVL\()_saved_reg + + SAVE_R0_TO_R12 + PUSH gp + PUSH fp + PUSH blink + PUSH ilink\LVL\() + PUSHAX status32_l\LVL\() + PUSH lp_count + PUSHAX lp_end + PUSHAX lp_start + PUSHAX bta_l\LVL\() + +#ifdef CONFIG_ARC_CURR_IN_REG + /* gp already saved on stack: now load with "current" */ + GET_CURR_TASK_ON_CPU gp +#endif +.endm + +/*-------------------------------------------------------------- + * Restore all registers used by interrupt handlers. + * + * NOTE: + * + * It is recommended that lp_count/ilink1/ilink2 not be used as a dest reg + * for memory load operations. If used in that way interrupts are deffered + * by hardware and that is not good. + *-------------------------------------------------------------*/ +.macro INTERRUPT_EPILOGUE LVL + + POPAX bta_l\LVL\() + POPAX lp_start + POPAX lp_end + + POP r9 + mov lp_count, r9 ;LD to lp_count is not allowed + + POPAX status32_l\LVL\() + POP ilink\LVL\() + POP blink + POP fp + POP gp + RESTORE_R12_TO_R0 + + ld sp, [sp] /* restore original sp; orig_r0, ECR skipped implicitly */ +.endm + +/* Get thread_info of "current" tsk */ +.macro GET_CURR_THR_INFO_FROM_SP reg + bic \reg, sp, (THREAD_SIZE - 1) +.endm + +/* Get CPU-ID of this core */ +.macro GET_CPU_ID reg + lr \reg, [identity] + lsr \reg, \reg, 8 + bmsk \reg, \reg, 7 +.endm + +#endif /* __ASM_ARC_ENTRY_COMPACT_H */ diff --git a/arch/arc/include/asm/entry.h b/arch/arc/include/asm/entry.h new file mode 100644 index 0000000000..49c2e090cb --- /dev/null +++ b/arch/arc/include/asm/entry.h @@ -0,0 +1,270 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef __ASM_ARC_ENTRY_H +#define __ASM_ARC_ENTRY_H + +#include <asm/unistd.h> /* For NR_syscalls defination */ +#include <asm/arcregs.h> +#include <asm/ptrace.h> +#include <asm/processor.h> /* For VMALLOC_START */ +#include <asm/mmu.h> + +#ifdef __ASSEMBLY__ + +#ifdef CONFIG_ISA_ARCOMPACT +#include <asm/entry-compact.h> /* ISA specific bits */ +#else +#include <asm/entry-arcv2.h> +#endif + +/* Note on the LD/ST addr modes with addr reg wback + * + * LD.a same as LD.aw + * + * LD.a reg1, [reg2, x] => Pre Incr + * Eff Addr for load = [reg2 + x] + * + * LD.ab reg1, [reg2, x] => Post Incr + * Eff Addr for load = [reg2] + */ + +.macro PUSH reg + st.a \reg, [sp, -4] +.endm + +.macro PUSHAX aux + lr r9, [\aux] + PUSH r9 +.endm + +.macro POP reg + ld.ab \reg, [sp, 4] +.endm + +.macro POPAX aux + POP r9 + sr r9, [\aux] +.endm + +/*-------------------------------------------------------------- + * Helpers to save/restore Scratch Regs: + * used by Interrupt/Exception Prologue/Epilogue + *-------------------------------------------------------------*/ +.macro SAVE_R0_TO_R12 + PUSH r0 + PUSH r1 + PUSH r2 + PUSH r3 + PUSH r4 + PUSH r5 + PUSH r6 + PUSH r7 + PUSH r8 + PUSH r9 + PUSH r10 + PUSH r11 + PUSH r12 +.endm + +.macro RESTORE_R12_TO_R0 + POP r12 + POP r11 + POP r10 + POP r9 + POP r8 + POP r7 + POP r6 + POP r5 + POP r4 + POP r3 + POP r2 + POP r1 + POP r0 + +.endm + +/*-------------------------------------------------------------- + * Helpers to save/restore callee-saved regs: + * used by several macros below + *-------------------------------------------------------------*/ +.macro SAVE_R13_TO_R25 + PUSH r13 + PUSH r14 + PUSH r15 + PUSH r16 + PUSH r17 + PUSH r18 + PUSH r19 + PUSH r20 + PUSH r21 + PUSH r22 + PUSH r23 + PUSH r24 + PUSH r25 +.endm + +.macro RESTORE_R25_TO_R13 + POP r25 + POP r24 + POP r23 + POP r22 + POP r21 + POP r20 + POP r19 + POP r18 + POP r17 + POP r16 + POP r15 + POP r14 + POP r13 +.endm + +/* + * save user mode callee regs as struct callee_regs + * - needed by fork/do_signal/unaligned-access-emulation. + */ +.macro SAVE_CALLEE_SAVED_USER + SAVE_R13_TO_R25 +.endm + +/* + * restore user mode callee regs as struct callee_regs + * - could have been changed by ptrace tracer or unaligned-access fixup + */ +.macro RESTORE_CALLEE_SAVED_USER + RESTORE_R25_TO_R13 +.endm + +/* + * save/restore kernel mode callee regs at the time of context switch + */ +.macro SAVE_CALLEE_SAVED_KERNEL + SAVE_R13_TO_R25 +.endm + +.macro RESTORE_CALLEE_SAVED_KERNEL + RESTORE_R25_TO_R13 +.endm + +/*-------------------------------------------------------------- + * Super FAST Restore callee saved regs by simply re-adjusting SP + *-------------------------------------------------------------*/ +.macro DISCARD_CALLEE_SAVED_USER + add sp, sp, SZ_CALLEE_REGS +.endm + +/*------------------------------------------------------------- + * given a tsk struct, get to the base of it's kernel mode stack + * tsk->thread_info is really a PAGE, whose bottom hoists stack + * which grows upwards towards thread_info + *------------------------------------------------------------*/ + +.macro GET_TSK_STACK_BASE tsk, out + + /* Get task->thread_info (this is essentially start of a PAGE) */ + ld \out, [\tsk, TASK_THREAD_INFO] + + /* Go to end of page where stack begins (grows upwards) */ + add2 \out, \out, (THREAD_SIZE)/4 + +.endm + +/* + * @reg [OUT] thread_info->flags of "current" + */ +.macro GET_CURR_THR_INFO_FLAGS reg + GET_CURR_THR_INFO_FROM_SP \reg + ld \reg, [\reg, THREAD_INFO_FLAGS] +.endm + +#ifdef CONFIG_SMP + +/* + * Retrieve the current running task on this CPU + * - loads it from backing _current_task[] (and can't use the + * caching reg for current task + */ +.macro GET_CURR_TASK_ON_CPU reg + GET_CPU_ID \reg + ld.as \reg, [@_current_task, \reg] +.endm + +/*------------------------------------------------- + * Save a new task as the "current" task on this CPU + * 1. Determine curr CPU id. + * 2. Use it to index into _current_task[ ] + * + * Coded differently than GET_CURR_TASK_ON_CPU (which uses LD.AS) + * because ST r0, [r1, offset] can ONLY have s9 @offset + * while LD can take s9 (4 byte insn) or LIMM (8 byte insn) + */ + +.macro SET_CURR_TASK_ON_CPU tsk, tmp + GET_CPU_ID \tmp + add2 \tmp, @_current_task, \tmp + st \tsk, [\tmp] +#ifdef CONFIG_ARC_CURR_IN_REG + mov gp, \tsk +#endif + +.endm + + +#else /* Uniprocessor implementation of macros */ + +.macro GET_CURR_TASK_ON_CPU reg + ld \reg, [@_current_task] +.endm + +.macro SET_CURR_TASK_ON_CPU tsk, tmp + st \tsk, [@_current_task] +#ifdef CONFIG_ARC_CURR_IN_REG + mov gp, \tsk +#endif +.endm + +#endif /* SMP / UNI */ + +/* + * Get the ptr to some field of Current Task at @off in task struct + * - Uses current task cached in reg if enabled + */ +#ifdef CONFIG_ARC_CURR_IN_REG + +.macro GET_CURR_TASK_FIELD_PTR off, reg + add \reg, gp, \off +.endm + +#else + +.macro GET_CURR_TASK_FIELD_PTR off, reg + GET_CURR_TASK_ON_CPU \reg + add \reg, \reg, \off +.endm + +#endif /* CONFIG_ARC_CURR_IN_REG */ + +#else /* !__ASSEMBLY__ */ + +extern void do_signal(struct pt_regs *); +extern void do_notify_resume(struct pt_regs *); +extern int do_privilege_fault(unsigned long, struct pt_regs *); +extern int do_extension_fault(unsigned long, struct pt_regs *); +extern int insterror_is_error(unsigned long, struct pt_regs *); +extern int do_memory_error(unsigned long, struct pt_regs *); +extern int trap_is_brkpt(unsigned long, struct pt_regs *); +extern int do_misaligned_error(unsigned long, struct pt_regs *); +extern int do_trap5_error(unsigned long, struct pt_regs *); +extern int do_misaligned_access(unsigned long, struct pt_regs *, struct callee_regs *); +extern void do_machine_check_fault(unsigned long, struct pt_regs *); +extern void do_non_swi_trap(unsigned long, struct pt_regs *); +extern void do_insterror_or_kprobe(unsigned long, struct pt_regs *); +extern void do_page_fault(unsigned long, struct pt_regs *); + +#endif + +#endif /* __ASM_ARC_ENTRY_H */ diff --git a/arch/arc/include/asm/exec.h b/arch/arc/include/asm/exec.h new file mode 100644 index 0000000000..6134175d96 --- /dev/null +++ b/arch/arc/include/asm/exec.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef __ASM_ARC_EXEC_H +#define __ASM_ARC_EXEC_H + +/* Align to 16b */ +#define arch_align_stack(p) ((unsigned long)(p) & ~0xf) + +#endif diff --git a/arch/arc/include/asm/fb.h b/arch/arc/include/asm/fb.h new file mode 100644 index 0000000000..9c2383d29c --- /dev/null +++ b/arch/arc/include/asm/fb.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef _ASM_FB_H_ +#define _ASM_FB_H_ + +#include <asm-generic/fb.h> + +#endif /* _ASM_FB_H_ */ diff --git a/arch/arc/include/asm/fpu.h b/arch/arc/include/asm/fpu.h new file mode 100644 index 0000000000..006bcf88a7 --- /dev/null +++ b/arch/arc/include/asm/fpu.h @@ -0,0 +1,57 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2020 Synopsys, Inc. (www.synopsys.com) + * + */ + +#ifndef _ASM_ARC_FPU_H +#define _ASM_ARC_FPU_H + +#ifdef CONFIG_ARC_FPU_SAVE_RESTORE + +#include <asm/ptrace.h> + +#ifdef CONFIG_ISA_ARCOMPACT + +/* These DPFP regs need to be saved/restored across ctx-sw */ +struct arc_fpu { + struct { + unsigned int l, h; + } aux_dpfp[2]; +}; + +#define fpu_init_task(regs) + +#else + +/* + * ARCv2 FPU Control aux register + * - bits to enable Traps on Exceptions + * - Rounding mode + * + * ARCv2 FPU Status aux register + * - FPU exceptions flags (Inv, Div-by-Zero, overflow, underflow, inexact) + * - Flag Write Enable to clear flags explicitly (vs. by fpu instructions + * only + */ + +struct arc_fpu { + unsigned int ctrl, status; +}; + +extern void fpu_init_task(struct pt_regs *regs); + +#endif /* !CONFIG_ISA_ARCOMPACT */ + +struct task_struct; + +extern void fpu_save_restore(struct task_struct *p, struct task_struct *n); + +#else /* !CONFIG_ARC_FPU_SAVE_RESTORE */ + +#define fpu_save_restore(p, n) +#define fpu_init_task(regs) + +#endif /* CONFIG_ARC_FPU_SAVE_RESTORE */ + +#endif /* _ASM_ARC_FPU_H */ diff --git a/arch/arc/include/asm/futex.h b/arch/arc/include/asm/futex.h new file mode 100644 index 0000000000..607d1c16d4 --- /dev/null +++ b/arch/arc/include/asm/futex.h @@ -0,0 +1,169 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * Vineetg: August 2010: From Android kernel work + */ + +#ifndef _ASM_FUTEX_H +#define _ASM_FUTEX_H + +#include <linux/futex.h> +#include <linux/preempt.h> +#include <linux/uaccess.h> +#include <asm/errno.h> + +#ifdef CONFIG_ARC_HAS_LLSC + +#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)\ + \ + smp_mb(); \ + __asm__ __volatile__( \ + "1: llock %1, [%2] \n" \ + insn "\n" \ + "2: scond %0, [%2] \n" \ + " bnz 1b \n" \ + " mov %0, 0 \n" \ + "3: \n" \ + " .section .fixup,\"ax\" \n" \ + " .align 4 \n" \ + "4: mov %0, %4 \n" \ + " j 3b \n" \ + " .previous \n" \ + " .section __ex_table,\"a\" \n" \ + " .align 4 \n" \ + " .word 1b, 4b \n" \ + " .word 2b, 4b \n" \ + " .previous \n" \ + \ + : "=&r" (ret), "=&r" (oldval) \ + : "r" (uaddr), "r" (oparg), "ir" (-EFAULT) \ + : "cc", "memory"); \ + smp_mb() \ + +#else /* !CONFIG_ARC_HAS_LLSC */ + +#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)\ + \ + smp_mb(); \ + __asm__ __volatile__( \ + "1: ld %1, [%2] \n" \ + insn "\n" \ + "2: st %0, [%2] \n" \ + " mov %0, 0 \n" \ + "3: \n" \ + " .section .fixup,\"ax\" \n" \ + " .align 4 \n" \ + "4: mov %0, %4 \n" \ + " j 3b \n" \ + " .previous \n" \ + " .section __ex_table,\"a\" \n" \ + " .align 4 \n" \ + " .word 1b, 4b \n" \ + " .word 2b, 4b \n" \ + " .previous \n" \ + \ + : "=&r" (ret), "=&r" (oldval) \ + : "r" (uaddr), "r" (oparg), "ir" (-EFAULT) \ + : "cc", "memory"); \ + smp_mb() \ + +#endif + +static inline int arch_futex_atomic_op_inuser(int op, int oparg, int *oval, + u32 __user *uaddr) +{ + int oldval = 0, ret; + + if (!access_ok(uaddr, sizeof(u32))) + return -EFAULT; + +#ifndef CONFIG_ARC_HAS_LLSC + preempt_disable(); /* to guarantee atomic r-m-w of futex op */ +#endif + + switch (op) { + case FUTEX_OP_SET: + __futex_atomic_op("mov %0, %3", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_ADD: + /* oldval = *uaddr; *uaddr += oparg ; ret = *uaddr */ + __futex_atomic_op("add %0, %1, %3", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_OR: + __futex_atomic_op("or %0, %1, %3", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_ANDN: + __futex_atomic_op("bic %0, %1, %3", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_XOR: + __futex_atomic_op("xor %0, %1, %3", ret, oldval, uaddr, oparg); + break; + default: + ret = -ENOSYS; + } + +#ifndef CONFIG_ARC_HAS_LLSC + preempt_enable(); +#endif + + if (!ret) + *oval = oldval; + + return ret; +} + +/* + * cmpxchg of futex (pagefaults disabled by caller) + * Return 0 for success, -EFAULT otherwise + */ +static inline int +futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, u32 expval, + u32 newval) +{ + int ret = 0; + u32 existval; + + if (!access_ok(uaddr, sizeof(u32))) + return -EFAULT; + +#ifndef CONFIG_ARC_HAS_LLSC + preempt_disable(); /* to guarantee atomic r-m-w of futex op */ +#endif + smp_mb(); + + __asm__ __volatile__( +#ifdef CONFIG_ARC_HAS_LLSC + "1: llock %1, [%4] \n" + " brne %1, %2, 3f \n" + "2: scond %3, [%4] \n" + " bnz 1b \n" +#else + "1: ld %1, [%4] \n" + " brne %1, %2, 3f \n" + "2: st %3, [%4] \n" +#endif + "3: \n" + " .section .fixup,\"ax\" \n" + "4: mov %0, %5 \n" + " j 3b \n" + " .previous \n" + " .section __ex_table,\"a\" \n" + " .align 4 \n" + " .word 1b, 4b \n" + " .word 2b, 4b \n" + " .previous\n" + : "+&r"(ret), "=&r"(existval) + : "r"(expval), "r"(newval), "r"(uaddr), "ir"(-EFAULT) + : "cc", "memory"); + + smp_mb(); + +#ifndef CONFIG_ARC_HAS_LLSC + preempt_enable(); +#endif + *uval = existval; + return ret; +} + +#endif diff --git a/arch/arc/include/asm/highmem.h b/arch/arc/include/asm/highmem.h new file mode 100644 index 0000000000..a6b8e2c352 --- /dev/null +++ b/arch/arc/include/asm/highmem.h @@ -0,0 +1,53 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2015 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef _ASM_HIGHMEM_H +#define _ASM_HIGHMEM_H + +#ifdef CONFIG_HIGHMEM + +#include <uapi/asm/page.h> +#include <asm/kmap_size.h> + +#define FIXMAP_SIZE PGDIR_SIZE +#define PKMAP_SIZE PGDIR_SIZE + +/* start after vmalloc area */ +#define FIXMAP_BASE (PAGE_OFFSET - FIXMAP_SIZE - PKMAP_SIZE) + +#define FIX_KMAP_SLOTS (KM_MAX_IDX * NR_CPUS) +#define FIX_KMAP_BEGIN (0UL) +#define FIX_KMAP_END ((FIX_KMAP_BEGIN + FIX_KMAP_SLOTS) - 1) + +#define FIXADDR_TOP (FIXMAP_BASE + (FIX_KMAP_END << PAGE_SHIFT)) + +/* + * This should be converted to the asm-generic version, but of course this + * is needlessly different from all other architectures. Sigh - tglx + */ +#define __fix_to_virt(x) (FIXADDR_TOP - ((x) << PAGE_SHIFT)) +#define __virt_to_fix(x) (((FIXADDR_TOP - ((x) & PAGE_MASK))) >> PAGE_SHIFT) + +/* start after fixmap area */ +#define PKMAP_BASE (FIXMAP_BASE + FIXMAP_SIZE) +#define LAST_PKMAP (PKMAP_SIZE >> PAGE_SHIFT) +#define LAST_PKMAP_MASK (LAST_PKMAP - 1) +#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT)) +#define PKMAP_NR(virt) (((virt) - PKMAP_BASE) >> PAGE_SHIFT) + +#include <asm/cacheflush.h> + +extern void kmap_init(void); + +#define arch_kmap_local_post_unmap(vaddr) \ + local_flush_tlb_kernel_range(vaddr, vaddr + PAGE_SIZE) + +static inline void flush_cache_kmaps(void) +{ + flush_cache_all(); +} +#endif + +#endif diff --git a/arch/arc/include/asm/hugepage.h b/arch/arc/include/asm/hugepage.h new file mode 100644 index 0000000000..ef8d416637 --- /dev/null +++ b/arch/arc/include/asm/hugepage.h @@ -0,0 +1,67 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com) + */ + + +#ifndef _ASM_ARC_HUGEPAGE_H +#define _ASM_ARC_HUGEPAGE_H + +#include <linux/types.h> +#include <asm-generic/pgtable-nopmd.h> + +static inline pte_t pmd_pte(pmd_t pmd) +{ + return __pte(pmd_val(pmd)); +} + +static inline pmd_t pte_pmd(pte_t pte) +{ + return __pmd(pte_val(pte)); +} + +#define pmd_wrprotect(pmd) pte_pmd(pte_wrprotect(pmd_pte(pmd))) +#define pmd_mkwrite_novma(pmd) pte_pmd(pte_mkwrite_novma(pmd_pte(pmd))) +#define pmd_mkdirty(pmd) pte_pmd(pte_mkdirty(pmd_pte(pmd))) +#define pmd_mkold(pmd) pte_pmd(pte_mkold(pmd_pte(pmd))) +#define pmd_mkyoung(pmd) pte_pmd(pte_mkyoung(pmd_pte(pmd))) +#define pmd_mkhuge(pmd) pte_pmd(pte_mkhuge(pmd_pte(pmd))) +#define pmd_mkinvalid(pmd) pte_pmd(pte_mknotpresent(pmd_pte(pmd))) +#define pmd_mkclean(pmd) pte_pmd(pte_mkclean(pmd_pte(pmd))) + +#define pmd_write(pmd) pte_write(pmd_pte(pmd)) +#define pmd_young(pmd) pte_young(pmd_pte(pmd)) +#define pmd_dirty(pmd) pte_dirty(pmd_pte(pmd)) + +#define mk_pmd(page, prot) pte_pmd(mk_pte(page, prot)) + +#define pmd_trans_huge(pmd) (pmd_val(pmd) & _PAGE_HW_SZ) + +#define pfn_pmd(pfn, prot) (__pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))) + +static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot) +{ + /* + * open-coded pte_modify() with additional retaining of HW_SZ bit + * so that pmd_trans_huge() remains true for this PMD + */ + return __pmd((pmd_val(pmd) & (_PAGE_CHG_MASK | _PAGE_HW_SZ)) | pgprot_val(newprot)); +} + +static inline void set_pmd_at(struct mm_struct *mm, unsigned long addr, + pmd_t *pmdp, pmd_t pmd) +{ + *pmdp = pmd; +} + +extern void update_mmu_cache_pmd(struct vm_area_struct *vma, unsigned long addr, + pmd_t *pmd); + +#define __HAVE_ARCH_FLUSH_PMD_TLB_RANGE +extern void flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end); + +/* We don't have hardware dirty/accessed bits, generic_pmdp_establish is fine.*/ +#define pmdp_establish generic_pmdp_establish + +#endif diff --git a/arch/arc/include/asm/io.h b/arch/arc/include/asm/io.h new file mode 100644 index 0000000000..4fdb735063 --- /dev/null +++ b/arch/arc/include/asm/io.h @@ -0,0 +1,234 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef _ASM_ARC_IO_H +#define _ASM_ARC_IO_H + +#include <linux/types.h> +#include <asm/byteorder.h> +#include <asm/page.h> +#include <asm/unaligned.h> + +#ifdef CONFIG_ISA_ARCV2 +#include <asm/barrier.h> +#define __iormb() rmb() +#define __iowmb() wmb() +#else +#define __iormb() do { } while (0) +#define __iowmb() do { } while (0) +#endif + +extern void __iomem *ioremap(phys_addr_t paddr, unsigned long size); +#define ioremap ioremap +#define ioremap_prot ioremap_prot +#define iounmap iounmap +static inline void __iomem *ioport_map(unsigned long port, unsigned int nr) +{ + return (void __iomem *)port; +} + +static inline void ioport_unmap(void __iomem *addr) +{ +} + +/* + * io{read,write}{16,32}be() macros + */ +#define ioread16be(p) ({ u16 __v = be16_to_cpu((__force __be16)__raw_readw(p)); __iormb(); __v; }) +#define ioread32be(p) ({ u32 __v = be32_to_cpu((__force __be32)__raw_readl(p)); __iormb(); __v; }) + +#define iowrite16be(v,p) ({ __iowmb(); __raw_writew((__force u16)cpu_to_be16(v), p); }) +#define iowrite32be(v,p) ({ __iowmb(); __raw_writel((__force u32)cpu_to_be32(v), p); }) + +/* Change struct page to physical address */ +#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) + +#define __raw_readb __raw_readb +static inline u8 __raw_readb(const volatile void __iomem *addr) +{ + u8 b; + + __asm__ __volatile__( + " ldb%U1 %0, %1 \n" + : "=r" (b) + : "m" (*(volatile u8 __force *)addr) + : "memory"); + + return b; +} + +#define __raw_readw __raw_readw +static inline u16 __raw_readw(const volatile void __iomem *addr) +{ + u16 s; + + __asm__ __volatile__( + " ldw%U1 %0, %1 \n" + : "=r" (s) + : "m" (*(volatile u16 __force *)addr) + : "memory"); + + return s; +} + +#define __raw_readl __raw_readl +static inline u32 __raw_readl(const volatile void __iomem *addr) +{ + u32 w; + + __asm__ __volatile__( + " ld%U1 %0, %1 \n" + : "=r" (w) + : "m" (*(volatile u32 __force *)addr) + : "memory"); + + return w; +} + +/* + * {read,write}s{b,w,l}() repeatedly access the same IO address in + * native endianness in 8-, 16-, 32-bit chunks {into,from} memory, + * @count times + */ +#define __raw_readsx(t,f) \ +static inline void __raw_reads##f(const volatile void __iomem *addr, \ + void *ptr, unsigned int count) \ +{ \ + bool is_aligned = ((unsigned long)ptr % ((t) / 8)) == 0; \ + u##t *buf = ptr; \ + \ + if (!count) \ + return; \ + \ + /* Some ARC CPU's don't support unaligned accesses */ \ + if (is_aligned) { \ + do { \ + u##t x = __raw_read##f(addr); \ + *buf++ = x; \ + } while (--count); \ + } else { \ + do { \ + u##t x = __raw_read##f(addr); \ + put_unaligned(x, buf++); \ + } while (--count); \ + } \ +} + +#define __raw_readsb __raw_readsb +__raw_readsx(8, b) +#define __raw_readsw __raw_readsw +__raw_readsx(16, w) +#define __raw_readsl __raw_readsl +__raw_readsx(32, l) + +#define __raw_writeb __raw_writeb +static inline void __raw_writeb(u8 b, volatile void __iomem *addr) +{ + __asm__ __volatile__( + " stb%U1 %0, %1 \n" + : + : "r" (b), "m" (*(volatile u8 __force *)addr) + : "memory"); +} + +#define __raw_writew __raw_writew +static inline void __raw_writew(u16 s, volatile void __iomem *addr) +{ + __asm__ __volatile__( + " stw%U1 %0, %1 \n" + : + : "r" (s), "m" (*(volatile u16 __force *)addr) + : "memory"); + +} + +#define __raw_writel __raw_writel +static inline void __raw_writel(u32 w, volatile void __iomem *addr) +{ + __asm__ __volatile__( + " st%U1 %0, %1 \n" + : + : "r" (w), "m" (*(volatile u32 __force *)addr) + : "memory"); + +} + +#define __raw_writesx(t,f) \ +static inline void __raw_writes##f(volatile void __iomem *addr, \ + const void *ptr, unsigned int count) \ +{ \ + bool is_aligned = ((unsigned long)ptr % ((t) / 8)) == 0; \ + const u##t *buf = ptr; \ + \ + if (!count) \ + return; \ + \ + /* Some ARC CPU's don't support unaligned accesses */ \ + if (is_aligned) { \ + do { \ + __raw_write##f(*buf++, addr); \ + } while (--count); \ + } else { \ + do { \ + __raw_write##f(get_unaligned(buf++), addr); \ + } while (--count); \ + } \ +} + +#define __raw_writesb __raw_writesb +__raw_writesx(8, b) +#define __raw_writesw __raw_writesw +__raw_writesx(16, w) +#define __raw_writesl __raw_writesl +__raw_writesx(32, l) + +/* + * MMIO can also get buffered/optimized in micro-arch, so barriers needed + * Based on ARM model for the typical use case + * + * <ST [DMA buffer]> + * <writel MMIO "go" reg> + * or: + * <readl MMIO "status" reg> + * <LD [DMA buffer]> + * + * http://lkml.kernel.org/r/20150622133656.GG1583@arm.com + */ +#define readb(c) ({ u8 __v = readb_relaxed(c); __iormb(); __v; }) +#define readw(c) ({ u16 __v = readw_relaxed(c); __iormb(); __v; }) +#define readl(c) ({ u32 __v = readl_relaxed(c); __iormb(); __v; }) +#define readsb(p,d,l) ({ __raw_readsb(p,d,l); __iormb(); }) +#define readsw(p,d,l) ({ __raw_readsw(p,d,l); __iormb(); }) +#define readsl(p,d,l) ({ __raw_readsl(p,d,l); __iormb(); }) + +#define writeb(v,c) ({ __iowmb(); writeb_relaxed(v,c); }) +#define writew(v,c) ({ __iowmb(); writew_relaxed(v,c); }) +#define writel(v,c) ({ __iowmb(); writel_relaxed(v,c); }) +#define writesb(p,d,l) ({ __iowmb(); __raw_writesb(p,d,l); }) +#define writesw(p,d,l) ({ __iowmb(); __raw_writesw(p,d,l); }) +#define writesl(p,d,l) ({ __iowmb(); __raw_writesl(p,d,l); }) + +/* + * Relaxed API for drivers which can handle barrier ordering themselves + * + * Also these are defined to perform little endian accesses. + * To provide the typical device register semantics of fixed endian, + * swap the byte order for Big Endian + * + * http://lkml.kernel.org/r/201603100845.30602.arnd@arndb.de + */ +#define readb_relaxed(c) __raw_readb(c) +#define readw_relaxed(c) ({ u16 __r = le16_to_cpu((__force __le16) \ + __raw_readw(c)); __r; }) +#define readl_relaxed(c) ({ u32 __r = le32_to_cpu((__force __le32) \ + __raw_readl(c)); __r; }) + +#define writeb_relaxed(v,c) __raw_writeb(v,c) +#define writew_relaxed(v,c) __raw_writew((__force u16) cpu_to_le16(v),c) +#define writel_relaxed(v,c) __raw_writel((__force u32) cpu_to_le32(v),c) + +#include <asm-generic/io.h> + +#endif /* _ASM_ARC_IO_H */ diff --git a/arch/arc/include/asm/irq.h b/arch/arc/include/asm/irq.h new file mode 100644 index 0000000000..c574712ad8 --- /dev/null +++ b/arch/arc/include/asm/irq.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef __ASM_ARC_IRQ_H +#define __ASM_ARC_IRQ_H + +/* + * ARCv2 can support 240 interrupts in the core interrupts controllers and + * 128 interrupts in IDU. Thus 512 virtual IRQs must be enough for most + * configurations of boards. + * This doesnt affect ARCompact, but we change it to same value + */ +#define NR_IRQS 512 + +/* Platform Independent IRQs */ +#ifdef CONFIG_ISA_ARCV2 +#define IPI_IRQ 19 +#define SOFTIRQ_IRQ 21 +#define FIRST_EXT_IRQ 24 +#endif + +#include <linux/interrupt.h> +#include <asm-generic/irq.h> + +extern void arc_init_IRQ(void); +extern void arch_do_IRQ(unsigned int, struct pt_regs *); + +#endif diff --git a/arch/arc/include/asm/irqflags-arcv2.h b/arch/arc/include/asm/irqflags-arcv2.h new file mode 100644 index 0000000000..fb3c21f1a2 --- /dev/null +++ b/arch/arc/include/asm/irqflags-arcv2.h @@ -0,0 +1,175 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef __ASM_IRQFLAGS_ARCV2_H +#define __ASM_IRQFLAGS_ARCV2_H + +#include <asm/arcregs.h> + +/* status32 Bits */ +#define STATUS_AD_BIT 19 /* Disable Align chk: core supports non-aligned */ +#define STATUS_IE_BIT 31 + +#define STATUS_AD_MASK (1<<STATUS_AD_BIT) +#define STATUS_IE_MASK (1<<STATUS_IE_BIT) + +/* status32 Bits as encoded/expected by CLRI/SETI */ +#define CLRI_STATUS_IE_BIT 4 + +#define CLRI_STATUS_E_MASK 0xF +#define CLRI_STATUS_IE_MASK (1 << CLRI_STATUS_IE_BIT) + +#define AUX_USER_SP 0x00D +#define AUX_IRQ_CTRL 0x00E +#define AUX_IRQ_ACT 0x043 /* Active Intr across all levels */ +#define AUX_IRQ_LVL_PEND 0x200 /* Pending Intr across all levels */ +#define AUX_IRQ_HINT 0x201 /* For generating Soft Interrupts */ +#define AUX_IRQ_PRIORITY 0x206 +#define ICAUSE 0x40a +#define AUX_IRQ_SELECT 0x40b +#define AUX_IRQ_ENABLE 0x40c + +/* Was Intr taken in User Mode */ +#define AUX_IRQ_ACT_BIT_U 31 + +/* + * Hardware supports 16 priorities (0 highest, 15 lowest) + * Linux by default runs at 1, priority 0 reserved for NMI style interrupts + */ +#define ARCV2_IRQ_DEF_PRIO 1 + +/* seed value for status register */ +#ifdef CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS +#define __AD_ENB STATUS_AD_MASK +#else +#define __AD_ENB 0 +#endif + +#define ISA_INIT_STATUS_BITS (STATUS_IE_MASK | __AD_ENB | \ + (ARCV2_IRQ_DEF_PRIO << 1)) + +#ifndef __ASSEMBLY__ + +/* + * Save IRQ state and disable IRQs + */ +static inline long arch_local_irq_save(void) +{ + unsigned long flags; + + __asm__ __volatile__(" clri %0 \n" : "=r" (flags) : : "memory"); + + return flags; +} + +/* + * restore saved IRQ state + */ +static inline void arch_local_irq_restore(unsigned long flags) +{ + __asm__ __volatile__(" seti %0 \n" : : "r" (flags) : "memory"); +} + +/* + * Unconditionally Enable IRQs + */ +static inline void arch_local_irq_enable(void) +{ + unsigned int irqact = read_aux_reg(AUX_IRQ_ACT); + + if (irqact & 0xffff) + write_aux_reg(AUX_IRQ_ACT, irqact & ~0xffff); + + __asm__ __volatile__(" seti \n" : : : "memory"); +} + +/* + * Unconditionally Disable IRQs + */ +static inline void arch_local_irq_disable(void) +{ + __asm__ __volatile__(" clri \n" : : : "memory"); +} + +/* + * save IRQ state + */ +static inline long arch_local_save_flags(void) +{ + unsigned long temp; + + __asm__ __volatile__( + " lr %0, [status32] \n" + : "=&r"(temp) + : + : "memory"); + + /* To be compatible with irq_save()/irq_restore() + * encode the irq bits as expected by CLRI/SETI + * (this was needed to make CONFIG_TRACE_IRQFLAGS work) + */ + temp = (1 << 5) | + ((!!(temp & STATUS_IE_MASK)) << CLRI_STATUS_IE_BIT) | + ((temp >> 1) & CLRI_STATUS_E_MASK); + return temp; +} + +/* + * Query IRQ state + */ +static inline int arch_irqs_disabled_flags(unsigned long flags) +{ + return !(flags & CLRI_STATUS_IE_MASK); +} + +static inline int arch_irqs_disabled(void) +{ + return arch_irqs_disabled_flags(arch_local_save_flags()); +} + +static inline void arc_softirq_trigger(int irq) +{ + write_aux_reg(AUX_IRQ_HINT, irq); +} + +static inline void arc_softirq_clear(int irq) +{ + write_aux_reg(AUX_IRQ_HINT, 0); +} + +#else + +#ifdef CONFIG_TRACE_IRQFLAGS + +.macro TRACE_ASM_IRQ_DISABLE + bl trace_hardirqs_off +.endm + +.macro TRACE_ASM_IRQ_ENABLE + bl trace_hardirqs_on +.endm + +#else + +.macro TRACE_ASM_IRQ_DISABLE +.endm + +.macro TRACE_ASM_IRQ_ENABLE +.endm + +#endif +.macro IRQ_DISABLE scratch + clri + TRACE_ASM_IRQ_DISABLE +.endm + +.macro IRQ_ENABLE scratch + TRACE_ASM_IRQ_ENABLE + seti +.endm + +#endif /* __ASSEMBLY__ */ + +#endif diff --git a/arch/arc/include/asm/irqflags-compact.h b/arch/arc/include/asm/irqflags-compact.h new file mode 100644 index 0000000000..0d63e568d6 --- /dev/null +++ b/arch/arc/include/asm/irqflags-compact.h @@ -0,0 +1,201 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef __ASM_IRQFLAGS_ARCOMPACT_H +#define __ASM_IRQFLAGS_ARCOMPACT_H + +/* vineetg: March 2010 : local_irq_save( ) optimisation + * -Remove explicit mov of current status32 into reg, that is not needed + * -Use BIC insn instead of INVERTED + AND + * -Conditionally disable interrupts (if they are not enabled, don't disable) +*/ + +#include <asm/arcregs.h> + +/* status32 Reg bits related to Interrupt Handling */ +#define STATUS_E1_BIT 1 /* Int 1 enable */ +#define STATUS_E2_BIT 2 /* Int 2 enable */ +#define STATUS_A1_BIT 3 /* Int 1 active */ +#define STATUS_A2_BIT 4 /* Int 2 active */ +#define STATUS_AE_BIT 5 /* Exception active */ + +#define STATUS_E1_MASK (1<<STATUS_E1_BIT) +#define STATUS_E2_MASK (1<<STATUS_E2_BIT) +#define STATUS_A1_MASK (1<<STATUS_A1_BIT) +#define STATUS_A2_MASK (1<<STATUS_A2_BIT) +#define STATUS_AE_MASK (1<<STATUS_AE_BIT) +#define STATUS_IE_MASK (STATUS_E1_MASK | STATUS_E2_MASK) + +/* Other Interrupt Handling related Aux regs */ +#define AUX_IRQ_LEV 0x200 /* IRQ Priority: L1 or L2 */ +#define AUX_IRQ_HINT 0x201 /* For generating Soft Interrupts */ +#define AUX_IRQ_LV12 0x43 /* interrupt level register */ + +#define AUX_IENABLE 0x40c +#define AUX_ITRIGGER 0x40d +#define AUX_IPULSE 0x415 + +#define ISA_INIT_STATUS_BITS STATUS_IE_MASK + +#ifndef __ASSEMBLY__ + +/****************************************************************** + * IRQ Control Macros + * + * All of them have "memory" clobber (compiler barrier) which is needed to + * ensure that LD/ST requiring irq safetly (R-M-W when LLSC is not available) + * are redone after IRQs are re-enabled (and gcc doesn't reuse stale register) + * + * Noted at the time of Abilis Timer List corruption + * + * Orig Bug + Rejected solution: + * https://lore.kernel.org/lkml/1364553218-31255-1-git-send-email-vgupta@synopsys.com + * + * Reasoning: + * https://lore.kernel.org/lkml/CA+55aFyFWjpSVQM6M266tKrG_ZXJzZ-nYejpmXYQXbrr42mGPQ@mail.gmail.com + * + ******************************************************************/ + +/* + * Save IRQ state and disable IRQs + */ +static inline long arch_local_irq_save(void) +{ + unsigned long temp, flags; + + __asm__ __volatile__( + " lr %1, [status32] \n" + " bic %0, %1, %2 \n" + " and.f 0, %1, %2 \n" + " flag.nz %0 \n" + : "=r"(temp), "=r"(flags) + : "n"((STATUS_E1_MASK | STATUS_E2_MASK)) + : "memory", "cc"); + + return flags; +} + +/* + * restore saved IRQ state + */ +static inline void arch_local_irq_restore(unsigned long flags) +{ + + __asm__ __volatile__( + " flag %0 \n" + : + : "r"(flags) + : "memory"); +} + +/* + * Unconditionally Enable IRQs + */ +#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS +extern void arch_local_irq_enable(void); +#else +static inline void arch_local_irq_enable(void) +{ + unsigned long temp; + + __asm__ __volatile__( + " lr %0, [status32] \n" + " or %0, %0, %1 \n" + " flag %0 \n" + : "=&r"(temp) + : "n"((STATUS_E1_MASK | STATUS_E2_MASK)) + : "cc", "memory"); +} +#endif + +/* + * Unconditionally Disable IRQs + */ +static inline void arch_local_irq_disable(void) +{ + unsigned long temp; + + __asm__ __volatile__( + " lr %0, [status32] \n" + " and %0, %0, %1 \n" + " flag %0 \n" + : "=&r"(temp) + : "n"(~(STATUS_E1_MASK | STATUS_E2_MASK)) + : "memory"); +} + +/* + * save IRQ state + */ +static inline long arch_local_save_flags(void) +{ + unsigned long temp; + + __asm__ __volatile__( + " lr %0, [status32] \n" + : "=&r"(temp) + : + : "memory"); + + return temp; +} + +/* + * Query IRQ state + */ +static inline int arch_irqs_disabled_flags(unsigned long flags) +{ + return !(flags & (STATUS_E1_MASK +#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS + | STATUS_E2_MASK +#endif + )); +} + +static inline int arch_irqs_disabled(void) +{ + return arch_irqs_disabled_flags(arch_local_save_flags()); +} + +#else + +#ifdef CONFIG_TRACE_IRQFLAGS + +.macro TRACE_ASM_IRQ_DISABLE + bl trace_hardirqs_off +.endm + +.macro TRACE_ASM_IRQ_ENABLE + bl trace_hardirqs_on +.endm + +#else + +.macro TRACE_ASM_IRQ_DISABLE +.endm + +.macro TRACE_ASM_IRQ_ENABLE +.endm + +#endif + +.macro IRQ_DISABLE scratch + lr \scratch, [status32] + bic \scratch, \scratch, (STATUS_E1_MASK | STATUS_E2_MASK) + flag \scratch + TRACE_ASM_IRQ_DISABLE +.endm + +.macro IRQ_ENABLE scratch + TRACE_ASM_IRQ_ENABLE + lr \scratch, [status32] + or \scratch, \scratch, (STATUS_E1_MASK | STATUS_E2_MASK) + flag \scratch +.endm + +#endif /* __ASSEMBLY__ */ + +#endif diff --git a/arch/arc/include/asm/irqflags.h b/arch/arc/include/asm/irqflags.h new file mode 100644 index 0000000000..edf201a699 --- /dev/null +++ b/arch/arc/include/asm/irqflags.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef __ASM_ARC_IRQFLAGS_H +#define __ASM_ARC_IRQFLAGS_H + +#ifdef CONFIG_ISA_ARCOMPACT +#include <asm/irqflags-compact.h> +#else +#include <asm/irqflags-arcv2.h> +#endif + +#endif diff --git a/arch/arc/include/asm/jump_label.h b/arch/arc/include/asm/jump_label.h new file mode 100644 index 0000000000..9d96180797 --- /dev/null +++ b/arch/arc/include/asm/jump_label.h @@ -0,0 +1,72 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _ASM_ARC_JUMP_LABEL_H +#define _ASM_ARC_JUMP_LABEL_H + +#ifndef __ASSEMBLY__ + +#include <linux/stringify.h> +#include <linux/types.h> + +#define JUMP_LABEL_NOP_SIZE 4 + +/* + * NOTE about '.balign 4': + * + * To make atomic update of patched instruction available we need to guarantee + * that this instruction doesn't cross L1 cache line boundary. + * + * As of today we simply align instruction which can be patched by 4 byte using + * ".balign 4" directive. In that case patched instruction is aligned with one + * 16-bit NOP_S if this is required. + * However 'align by 4' directive is much stricter than it actually required. + * It's enough that our 32-bit instruction don't cross L1 cache line boundary / + * L1 I$ fetch block boundary which can be achieved by using + * ".bundle_align_mode" assembler directive. That will save us from adding + * useless NOP_S padding in most of the cases. + * + * TODO: switch to ".bundle_align_mode" directive using whin it will be + * supported by ARC toolchain. + */ + +static __always_inline bool arch_static_branch(struct static_key *key, + bool branch) +{ + asm_volatile_goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)" \n" + "1: \n" + "nop \n" + ".pushsection __jump_table, \"aw\" \n" + ".word 1b, %l[l_yes], %c0 \n" + ".popsection \n" + : : "i" (&((char *)key)[branch]) : : l_yes); + + return false; +l_yes: + return true; +} + +static __always_inline bool arch_static_branch_jump(struct static_key *key, + bool branch) +{ + asm_volatile_goto(".balign "__stringify(JUMP_LABEL_NOP_SIZE)" \n" + "1: \n" + "b %l[l_yes] \n" + ".pushsection __jump_table, \"aw\" \n" + ".word 1b, %l[l_yes], %c0 \n" + ".popsection \n" + : : "i" (&((char *)key)[branch]) : : l_yes); + + return false; +l_yes: + return true; +} + +typedef u32 jump_label_t; + +struct jump_entry { + jump_label_t code; + jump_label_t target; + jump_label_t key; +}; + +#endif /* __ASSEMBLY__ */ +#endif diff --git a/arch/arc/include/asm/kdebug.h b/arch/arc/include/asm/kdebug.h new file mode 100644 index 0000000000..f92049d1d3 --- /dev/null +++ b/arch/arc/include/asm/kdebug.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef _ASM_ARC_KDEBUG_H +#define _ASM_ARC_KDEBUG_H + +enum die_val { + DIE_UNUSED, + DIE_TRAP, + DIE_IERR, + DIE_OOPS +}; + +#endif diff --git a/arch/arc/include/asm/kgdb.h b/arch/arc/include/asm/kgdb.h new file mode 100644 index 0000000000..f9f71b9096 --- /dev/null +++ b/arch/arc/include/asm/kgdb.h @@ -0,0 +1,60 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * kgdb support for ARC + * + * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef __ARC_KGDB_H__ +#define __ARC_KGDB_H__ + +#ifdef CONFIG_KGDB + +#include <asm/ptrace.h> + +/* to ensure compatibility with Linux 2.6.35, we don't implement the get/set + * register API yet */ +#undef DBG_MAX_REG_NUM + +#define GDB_MAX_REGS 87 + +#define BREAK_INSTR_SIZE 2 +#define CACHE_FLUSH_IS_SAFE 1 +#define NUMREGBYTES (GDB_MAX_REGS * 4) +#define BUFMAX 2048 + +static inline void arch_kgdb_breakpoint(void) +{ + __asm__ __volatile__ ("trap_s 0x4\n"); +} + +extern void kgdb_trap(struct pt_regs *regs); + +/* This is the numbering of registers according to the GDB. See GDB's + * arc-tdep.h for details. + * + * Registers are ordered for GDB 7.5. It is incompatible with GDB 6.8. */ +enum arc_linux_regnums { + _R0 = 0, + _R1, _R2, _R3, _R4, _R5, _R6, _R7, _R8, _R9, _R10, _R11, _R12, _R13, + _R14, _R15, _R16, _R17, _R18, _R19, _R20, _R21, _R22, _R23, _R24, + _R25, _R26, + _FP = 27, + __SP = 28, + _R30 = 30, + _BLINK = 31, + _LP_COUNT = 60, + _STOP_PC = 64, + _RET = 64, + _LP_START = 65, + _LP_END = 66, + _STATUS32 = 67, + _ECR = 76, + _BTA = 82, +}; + +#else +#define kgdb_trap(regs) +#endif + +#endif /* __ARC_KGDB_H__ */ diff --git a/arch/arc/include/asm/kprobes.h b/arch/arc/include/asm/kprobes.h new file mode 100644 index 0000000000..de1566e32c --- /dev/null +++ b/arch/arc/include/asm/kprobes.h @@ -0,0 +1,55 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef _ARC_KPROBES_H +#define _ARC_KPROBES_H + +#include <asm-generic/kprobes.h> + +#ifdef CONFIG_KPROBES + +typedef u16 kprobe_opcode_t; + +#define UNIMP_S_INSTRUCTION 0x79e0 +#define TRAP_S_2_INSTRUCTION 0x785e + +#define MAX_INSN_SIZE 8 +#define MAX_STACK_SIZE 64 + +struct arch_specific_insn { + int is_short; + kprobe_opcode_t *t1_addr, *t2_addr; + kprobe_opcode_t t1_opcode, t2_opcode; +}; + +#define flush_insn_slot(p) do { } while (0) + +#define kretprobe_blacklist_size 0 + +struct kprobe; + +void arch_remove_kprobe(struct kprobe *p); + +int kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data); + +struct prev_kprobe { + struct kprobe *kp; + unsigned long status; +}; + +struct kprobe_ctlblk { + unsigned int kprobe_status; + struct prev_kprobe prev_kprobe; +}; + +int kprobe_fault_handler(struct pt_regs *regs, unsigned long cause); +void __kretprobe_trampoline(void); +void trap_is_kprobe(unsigned long address, struct pt_regs *regs); +#else +#define trap_is_kprobe(address, regs) +#endif /* CONFIG_KPROBES */ + +#endif /* _ARC_KPROBES_H */ diff --git a/arch/arc/include/asm/linkage.h b/arch/arc/include/asm/linkage.h new file mode 100644 index 0000000000..8a3fb71e9c --- /dev/null +++ b/arch/arc/include/asm/linkage.h @@ -0,0 +1,80 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef __ASM_LINKAGE_H +#define __ASM_LINKAGE_H + +#include <asm/dwarf.h> + +#define ASM_NL ` /* use '`' to mark new line in macro */ +#define __ALIGN .align 4 +#define __ALIGN_STR __stringify(__ALIGN) + +#ifdef __ASSEMBLY__ + +.macro ST2 e, o, off +#ifdef CONFIG_ARC_HAS_LL64 + std \e, [sp, \off] +#else + st \e, [sp, \off] + st \o, [sp, \off+4] +#endif +.endm + +.macro LD2 e, o, off +#ifdef CONFIG_ARC_HAS_LL64 + ldd \e, [sp, \off] +#else + ld \e, [sp, \off] + ld \o, [sp, \off+4] +#endif +.endm + +/* annotation for data we want in DCCM - if enabled in .config */ +.macro ARCFP_DATA nm +#ifdef CONFIG_ARC_HAS_DCCM + .section .data.arcfp +#else + .section .data +#endif + .global \nm +.endm + +/* annotation for data we want in DCCM - if enabled in .config */ +.macro ARCFP_CODE +#ifdef CONFIG_ARC_HAS_ICCM + .section .text.arcfp, "ax",@progbits +#else + .section .text, "ax",@progbits +#endif +.endm + +#define ENTRY_CFI(name) \ + .globl name ASM_NL \ + ALIGN ASM_NL \ + name: ASM_NL \ + CFI_STARTPROC ASM_NL + +#define END_CFI(name) \ + CFI_ENDPROC ASM_NL \ + .size name, .-name + +#else /* !__ASSEMBLY__ */ + +#ifdef CONFIG_ARC_HAS_ICCM +#define __arcfp_code __section(".text.arcfp") +#else +#define __arcfp_code __section(".text") +#endif + +#ifdef CONFIG_ARC_HAS_DCCM +#define __arcfp_data __section(".data.arcfp") +#else +#define __arcfp_data __section(".data") +#endif + +#endif /* __ASSEMBLY__ */ + +#endif diff --git a/arch/arc/include/asm/mach_desc.h b/arch/arc/include/asm/mach_desc.h new file mode 100644 index 0000000000..c4e1970593 --- /dev/null +++ b/arch/arc/include/asm/mach_desc.h @@ -0,0 +1,64 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com) + * + * based on METAG mach/arch.h (which in turn was based on ARM) + */ + +#ifndef _ASM_ARC_MACH_DESC_H_ +#define _ASM_ARC_MACH_DESC_H_ + +/** + * struct machine_desc - Board specific callbacks, called from ARC common code + * Provided by each ARC board using MACHINE_START()/MACHINE_END(), so + * a multi-platform kernel builds with array of such descriptors. + * We extend the early DT scan to also match the DT's "compatible" string + * against the @dt_compat of all such descriptors, and one with highest + * "DT score" is selected as global @machine_desc. + * + * @name: Board/SoC name + * @dt_compat: Array of device tree 'compatible' strings + * (XXX: although only 1st entry is looked at) + * @init_early: Very early callback [called from setup_arch()] + * @init_per_cpu: for each CPU as it is coming up (SMP as well as UP) + * [(M):init_IRQ(), (o):start_kernel_secondary()] + * @init_machine: arch initcall level callback (e.g. populate static + * platform devices or parse Devicetree) + * @init_late: Late initcall level callback + * + */ +struct machine_desc { + const char *name; + const char **dt_compat; + void (*init_early)(void); + void (*init_per_cpu)(unsigned int); + void (*init_machine)(void); + void (*init_late)(void); + +}; + +/* + * Current machine - only accessible during boot. + */ +extern const struct machine_desc *machine_desc; + +/* + * Machine type table - also only accessible during boot + */ +extern const struct machine_desc __arch_info_begin[], __arch_info_end[]; + +/* + * Set of macros to define architecture features. + * This is built into a table by the linker. + */ +#define MACHINE_START(_type, _name) \ +static const struct machine_desc __mach_desc_##_type \ +__used __section(".arch.info.init") = { \ + .name = _name, + +#define MACHINE_END \ +}; + +extern const struct machine_desc *setup_machine_fdt(void *dt); + +#endif diff --git a/arch/arc/include/asm/mmu-arcv2.h b/arch/arc/include/asm/mmu-arcv2.h new file mode 100644 index 0000000000..ed9036d4ed --- /dev/null +++ b/arch/arc/include/asm/mmu-arcv2.h @@ -0,0 +1,103 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012, 2019-20 Synopsys, Inc. (www.synopsys.com) + * + * MMUv3 (arc700) / MMUv4 (archs) are software page walked and software managed. + * This file contains the TLB access registers and commands + */ + +#ifndef _ASM_ARC_MMU_ARCV2_H +#define _ASM_ARC_MMU_ARCV2_H + +/* + * TLB Management regs + */ +#define ARC_REG_MMU_BCR 0x06f + +#ifdef CONFIG_ARC_MMU_V3 +#define ARC_REG_TLBPD0 0x405 +#define ARC_REG_TLBPD1 0x406 +#define ARC_REG_TLBPD1HI 0 /* Dummy: allows common code */ +#define ARC_REG_TLBINDEX 0x407 +#define ARC_REG_TLBCOMMAND 0x408 +#define ARC_REG_PID 0x409 +#define ARC_REG_SCRATCH_DATA0 0x418 +#else +#define ARC_REG_TLBPD0 0x460 +#define ARC_REG_TLBPD1 0x461 +#define ARC_REG_TLBPD1HI 0x463 +#define ARC_REG_TLBINDEX 0x464 +#define ARC_REG_TLBCOMMAND 0x465 +#define ARC_REG_PID 0x468 +#define ARC_REG_SCRATCH_DATA0 0x46c +#endif + +/* Bits in MMU PID reg */ +#define __TLB_ENABLE (1 << 31) +#define __PROG_ENABLE (1 << 30) +#define MMU_ENABLE (__TLB_ENABLE | __PROG_ENABLE) + +/* Bits in TLB Index reg */ +#define TLB_LKUP_ERR 0x80000000 + +#ifdef CONFIG_ARC_MMU_V3 +#define TLB_DUP_ERR (TLB_LKUP_ERR | 0x00000001) +#else +#define TLB_DUP_ERR (TLB_LKUP_ERR | 0x40000000) +#endif + +/* + * TLB Commands + */ +#define TLBWrite 0x1 +#define TLBRead 0x2 +#define TLBGetIndex 0x3 +#define TLBProbe 0x4 +#define TLBWriteNI 0x5 /* write JTLB without inv uTLBs */ +#define TLBIVUTLB 0x6 /* explicitly inv uTLBs */ + +#ifdef CONFIG_ARC_MMU_V4 +#define TLBInsertEntry 0x7 +#define TLBDeleteEntry 0x8 +#endif + +/* Masks for actual TLB "PD"s */ +#define PTE_BITS_IN_PD0 (_PAGE_GLOBAL | _PAGE_PRESENT | _PAGE_HW_SZ) +#define PTE_BITS_RWX (_PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ) + +#define PTE_BITS_NON_RWX_IN_PD1 (PAGE_MASK_PHYS | _PAGE_CACHEABLE) + +#ifndef __ASSEMBLY__ + +struct mm_struct; +extern int pae40_exist_but_not_enab(void); + +static inline int is_pae40_enabled(void) +{ + return IS_ENABLED(CONFIG_ARC_HAS_PAE40); +} + +static inline void mmu_setup_asid(struct mm_struct *mm, unsigned long asid) +{ + write_aux_reg(ARC_REG_PID, asid | MMU_ENABLE); +} + +static inline void mmu_setup_pgd(struct mm_struct *mm, void *pgd) +{ + /* PGD cached in MMU reg to avoid 3 mem lookups: task->mm->pgd */ +#ifdef CONFIG_ISA_ARCV2 + write_aux_reg(ARC_REG_SCRATCH_DATA0, (unsigned int)pgd); +#endif +} + +#else + +.macro ARC_MMU_REENABLE reg + lr \reg, [ARC_REG_PID] + or \reg, \reg, MMU_ENABLE + sr \reg, [ARC_REG_PID] +.endm + +#endif /* !__ASSEMBLY__ */ + +#endif diff --git a/arch/arc/include/asm/mmu.h b/arch/arc/include/asm/mmu.h new file mode 100644 index 0000000000..9febf5bc3d --- /dev/null +++ b/arch/arc/include/asm/mmu.h @@ -0,0 +1,23 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef _ASM_ARC_MMU_H +#define _ASM_ARC_MMU_H + +#ifndef __ASSEMBLY__ + +#include <linux/threads.h> /* NR_CPUS */ + +typedef struct { + unsigned long asid[NR_CPUS]; /* 8 bit MMU PID + Generation cycle */ +} mm_context_t; + +extern void do_tlb_overlap_fault(unsigned long, unsigned long, struct pt_regs *); + +#endif + +#include <asm/mmu-arcv2.h> + +#endif diff --git a/arch/arc/include/asm/mmu_context.h b/arch/arc/include/asm/mmu_context.h new file mode 100644 index 0000000000..dda471f5f0 --- /dev/null +++ b/arch/arc/include/asm/mmu_context.h @@ -0,0 +1,174 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * vineetg: May 2011 + * -Refactored get_new_mmu_context( ) to only handle live-mm. + * retiring-mm handled in other hooks + * + * Vineetg: March 25th, 2008: Bug #92690 + * -Major rewrite of Core ASID allocation routine get_new_mmu_context + * + * Amit Bhor, Sameer Dhavale: Codito Technologies 2004 + */ + +#ifndef _ASM_ARC_MMU_CONTEXT_H +#define _ASM_ARC_MMU_CONTEXT_H + +#include <linux/sched/mm.h> + +#include <asm/tlb.h> +#include <asm-generic/mm_hooks.h> + +/* ARC ASID Management + * + * MMU tags TLBs with an 8-bit ASID, avoiding need to flush the TLB on + * context-switch. + * + * ASID is managed per cpu, so task threads across CPUs can have different + * ASID. Global ASID management is needed if hardware supports TLB shootdown + * and/or shared TLB across cores, which ARC doesn't. + * + * Each task is assigned unique ASID, with a simple round-robin allocator + * tracked in @asid_cpu. When 8-bit value rolls over,a new cycle is started + * over from 0, and TLB is flushed + * + * A new allocation cycle, post rollover, could potentially reassign an ASID + * to a different task. Thus the rule is to refresh the ASID in a new cycle. + * The 32 bit @asid_cpu (and mm->asid) have 8 bits MMU PID and rest 24 bits + * serve as cycle/generation indicator and natural 32 bit unsigned math + * automagically increments the generation when lower 8 bits rollover. + */ + +#define MM_CTXT_ASID_MASK 0x000000ff /* MMU PID reg :8 bit PID */ +#define MM_CTXT_CYCLE_MASK (~MM_CTXT_ASID_MASK) + +#define MM_CTXT_FIRST_CYCLE (MM_CTXT_ASID_MASK + 1) +#define MM_CTXT_NO_ASID 0UL + +#define asid_mm(mm, cpu) mm->context.asid[cpu] +#define hw_pid(mm, cpu) (asid_mm(mm, cpu) & MM_CTXT_ASID_MASK) + +DECLARE_PER_CPU(unsigned int, asid_cache); +#define asid_cpu(cpu) per_cpu(asid_cache, cpu) + +/* + * Get a new ASID if task doesn't have a valid one (unalloc or from prev cycle) + * Also set the MMU PID register to existing/updated ASID + */ +static inline void get_new_mmu_context(struct mm_struct *mm) +{ + const unsigned int cpu = smp_processor_id(); + unsigned long flags; + + local_irq_save(flags); + + /* + * Move to new ASID if it was not from current alloc-cycle/generation. + * This is done by ensuring that the generation bits in both mm->ASID + * and cpu's ASID counter are exactly same. + * + * Note: Callers needing new ASID unconditionally, independent of + * generation, e.g. local_flush_tlb_mm() for forking parent, + * first need to destroy the context, setting it to invalid + * value. + */ + if (!((asid_mm(mm, cpu) ^ asid_cpu(cpu)) & MM_CTXT_CYCLE_MASK)) + goto set_hw; + + /* move to new ASID and handle rollover */ + if (unlikely(!(++asid_cpu(cpu) & MM_CTXT_ASID_MASK))) { + + local_flush_tlb_all(); + + /* + * Above check for rollover of 8 bit ASID in 32 bit container. + * If the container itself wrapped around, set it to a non zero + * "generation" to distinguish from no context + */ + if (!asid_cpu(cpu)) + asid_cpu(cpu) = MM_CTXT_FIRST_CYCLE; + } + + /* Assign new ASID to tsk */ + asid_mm(mm, cpu) = asid_cpu(cpu); + +set_hw: + mmu_setup_asid(mm, hw_pid(mm, cpu)); + + local_irq_restore(flags); +} + +/* + * Initialize the context related info for a new mm_struct + * instance. + */ +#define init_new_context init_new_context +static inline int +init_new_context(struct task_struct *tsk, struct mm_struct *mm) +{ + int i; + + for_each_possible_cpu(i) + asid_mm(mm, i) = MM_CTXT_NO_ASID; + + return 0; +} + +#define destroy_context destroy_context +static inline void destroy_context(struct mm_struct *mm) +{ + unsigned long flags; + + /* Needed to elide CONFIG_DEBUG_PREEMPT warning */ + local_irq_save(flags); + asid_mm(mm, smp_processor_id()) = MM_CTXT_NO_ASID; + local_irq_restore(flags); +} + +/* Prepare the MMU for task: setup PID reg with allocated ASID + If task doesn't have an ASID (never alloc or stolen, get a new ASID) +*/ +static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, + struct task_struct *tsk) +{ + const int cpu = smp_processor_id(); + + /* + * Note that the mm_cpumask is "aggregating" only, we don't clear it + * for the switched-out task, unlike some other arches. + * It is used to enlist cpus for sending TLB flush IPIs and not sending + * it to CPUs where a task once ran-on, could cause stale TLB entry + * re-use, specially for a multi-threaded task. + * e.g. T1 runs on C1, migrates to C3. T2 running on C2 munmaps. + * For a non-aggregating mm_cpumask, IPI not sent C1, and if T1 + * were to re-migrate to C1, it could access the unmapped region + * via any existing stale TLB entries. + */ + cpumask_set_cpu(cpu, mm_cpumask(next)); + + mmu_setup_pgd(next, next->pgd); + + get_new_mmu_context(next); +} + +/* + * activate_mm defaults (in asm-generic) to switch_mm and is called at the + * time of execve() to get a new ASID Note the subtlety here: + * get_new_mmu_context() behaves differently here vs. in switch_mm(). Here + * it always returns a new ASID, because mm has an unallocated "initial" + * value, while in latter, it moves to a new ASID, only if it was + * unallocated + */ + +/* it seemed that deactivate_mm( ) is a reasonable place to do book-keeping + * for retiring-mm. However destroy_context( ) still needs to do that because + * between mm_release( ) = >deactive_mm( ) and + * mmput => .. => __mmdrop( ) => destroy_context( ) + * there is a good chance that task gets sched-out/in, making it's ASID valid + * again (this teased me for a whole day). + */ + +#include <asm-generic/mmu_context.h> + +#endif /* __ASM_ARC_MMU_CONTEXT_H */ diff --git a/arch/arc/include/asm/module.h b/arch/arc/include/asm/module.h new file mode 100644 index 0000000000..f534a1fef0 --- /dev/null +++ b/arch/arc/include/asm/module.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * Amit Bhor, Sameer Dhavale: Codito Technologies 2004 + */ + +#ifndef _ASM_ARC_MODULE_H +#define _ASM_ARC_MODULE_H + +#include <asm-generic/module.h> + +struct mod_arch_specific { +#ifdef CONFIG_ARC_DW2_UNWIND + void *unw_info; + int unw_sec_idx; +#endif + const char *secstr; +}; + +#endif /* _ASM_ARC_MODULE_H */ diff --git a/arch/arc/include/asm/page.h b/arch/arc/include/asm/page.h new file mode 100644 index 0000000000..02b53ad811 --- /dev/null +++ b/arch/arc/include/asm/page.h @@ -0,0 +1,138 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ +#ifndef __ASM_ARC_PAGE_H +#define __ASM_ARC_PAGE_H + +#include <uapi/asm/page.h> + +#ifdef CONFIG_ARC_HAS_PAE40 + +#define MAX_POSSIBLE_PHYSMEM_BITS 40 +#define PAGE_MASK_PHYS (0xff00000000ull | PAGE_MASK) + +#else /* CONFIG_ARC_HAS_PAE40 */ + +#define MAX_POSSIBLE_PHYSMEM_BITS 32 +#define PAGE_MASK_PHYS PAGE_MASK + +#endif /* CONFIG_ARC_HAS_PAE40 */ + +#ifndef __ASSEMBLY__ + +#define clear_page(paddr) memset((paddr), 0, PAGE_SIZE) +#define copy_user_page(to, from, vaddr, pg) copy_page(to, from) +#define copy_page(to, from) memcpy((to), (from), PAGE_SIZE) + +struct vm_area_struct; +struct page; + +#define __HAVE_ARCH_COPY_USER_HIGHPAGE + +void copy_user_highpage(struct page *to, struct page *from, + unsigned long u_vaddr, struct vm_area_struct *vma); +void clear_user_page(void *to, unsigned long u_vaddr, struct page *page); + +typedef struct { + unsigned long pgd; +} pgd_t; + +#define pgd_val(x) ((x).pgd) +#define __pgd(x) ((pgd_t) { (x) }) + +#if CONFIG_PGTABLE_LEVELS > 3 + +typedef struct { + unsigned long pud; +} pud_t; + +#define pud_val(x) ((x).pud) +#define __pud(x) ((pud_t) { (x) }) + +#endif + +#if CONFIG_PGTABLE_LEVELS > 2 + +typedef struct { + unsigned long pmd; +} pmd_t; + +#define pmd_val(x) ((x).pmd) +#define __pmd(x) ((pmd_t) { (x) }) + +#endif + +typedef struct { +#ifdef CONFIG_ARC_HAS_PAE40 + unsigned long long pte; +#else + unsigned long pte; +#endif +} pte_t; + +#define pte_val(x) ((x).pte) +#define __pte(x) ((pte_t) { (x) }) + +typedef struct { + unsigned long pgprot; +} pgprot_t; + +#define pgprot_val(x) ((x).pgprot) +#define __pgprot(x) ((pgprot_t) { (x) }) +#define pte_pgprot(x) __pgprot(pte_val(x)) + +typedef struct page *pgtable_t; + +/* + * Use virt_to_pfn with caution: + * If used in pte or paddr related macros, it could cause truncation + * in PAE40 builds + * As a rule of thumb, only use it in helpers starting with virt_ + * You have been warned ! + */ +#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT) + +/* + * When HIGHMEM is enabled we have holes in the memory map so we need + * pfn_valid() that takes into account the actual extents of the physical + * memory + */ +#ifdef CONFIG_HIGHMEM + +extern unsigned long arch_pfn_offset; +#define ARCH_PFN_OFFSET arch_pfn_offset + +extern int pfn_valid(unsigned long pfn); +#define pfn_valid pfn_valid + +#else /* CONFIG_HIGHMEM */ + +#define ARCH_PFN_OFFSET virt_to_pfn((void *)CONFIG_LINUX_RAM_BASE) + +#endif /* CONFIG_HIGHMEM */ + +/* + * __pa, __va, virt_to_page (ALERT: deprecated, don't use them) + * + * These macros have historically been misnamed + * virt here means link-address/program-address as embedded in object code. + * And for ARC, link-addr = physical address + */ +#define __pa(vaddr) ((unsigned long)(vaddr)) +#define __va(paddr) ((void *)((unsigned long)(paddr))) + +#define virt_to_page(kaddr) pfn_to_page(virt_to_pfn(kaddr)) +#define virt_addr_valid(kaddr) pfn_valid(virt_to_pfn(kaddr)) + +/* Default Permissions for stack/heaps pages (Non Executable) */ +#define VM_DATA_DEFAULT_FLAGS VM_DATA_FLAGS_NON_EXEC + +#define WANT_PAGE_VIRTUAL 1 + +#include <asm-generic/memory_model.h> /* page_to_pfn, pfn_to_page */ +#include <asm-generic/getorder.h> + +#endif /* !__ASSEMBLY__ */ + +#endif diff --git a/arch/arc/include/asm/pci.h b/arch/arc/include/asm/pci.h new file mode 100644 index 0000000000..a6858e1117 --- /dev/null +++ b/arch/arc/include/asm/pci.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef _ASM_ARC_PCI_H +#define _ASM_ARC_PCI_H + +#ifdef __KERNEL__ +#include <linux/ioport.h> + +#define PCIBIOS_MIN_IO 0x100 +#define PCIBIOS_MIN_MEM 0x100000 + +#define pcibios_assign_all_busses() 1 + +#endif /* __KERNEL__ */ + +#endif /* _ASM_ARC_PCI_H */ diff --git a/arch/arc/include/asm/perf_event.h b/arch/arc/include/asm/perf_event.h new file mode 100644 index 0000000000..d5719a2608 --- /dev/null +++ b/arch/arc/include/asm/perf_event.h @@ -0,0 +1,70 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Linux performance counter support for ARC + * + * Copyright (C) 2014-2015 Synopsys, Inc. (www.synopsys.com) + * Copyright (C) 2011-2013 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef __ASM_PERF_EVENT_H +#define __ASM_PERF_EVENT_H + +/* Max number of counters that PCT block may ever have */ +#define ARC_PERF_MAX_COUNTERS 32 + +#define ARC_REG_CC_BUILD 0xF6 +#define ARC_REG_CC_INDEX 0x240 +#define ARC_REG_CC_NAME0 0x241 +#define ARC_REG_CC_NAME1 0x242 + +#define ARC_REG_PCT_BUILD 0xF5 +#define ARC_REG_PCT_COUNTL 0x250 +#define ARC_REG_PCT_COUNTH 0x251 +#define ARC_REG_PCT_SNAPL 0x252 +#define ARC_REG_PCT_SNAPH 0x253 +#define ARC_REG_PCT_CONFIG 0x254 +#define ARC_REG_PCT_CONTROL 0x255 +#define ARC_REG_PCT_INDEX 0x256 +#define ARC_REG_PCT_INT_CNTL 0x25C +#define ARC_REG_PCT_INT_CNTH 0x25D +#define ARC_REG_PCT_INT_CTRL 0x25E +#define ARC_REG_PCT_INT_ACT 0x25F + +#define ARC_REG_PCT_CONFIG_USER (1 << 18) /* count in user mode */ +#define ARC_REG_PCT_CONFIG_KERN (1 << 19) /* count in kernel mode */ + +#define ARC_REG_PCT_CONTROL_CC (1 << 16) /* clear counts */ +#define ARC_REG_PCT_CONTROL_SN (1 << 17) /* snapshot */ + +struct arc_reg_pct_build { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int m:8, c:8, r:5, i:1, s:2, v:8; +#else + unsigned int v:8, s:2, i:1, r:5, c:8, m:8; +#endif +}; + +struct arc_reg_cc_build { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int c:16, r:8, v:8; +#else + unsigned int v:8, r:8, c:16; +#endif +}; + +#define PERF_COUNT_ARC_DCLM (PERF_COUNT_HW_MAX + 0) +#define PERF_COUNT_ARC_DCSM (PERF_COUNT_HW_MAX + 1) +#define PERF_COUNT_ARC_ICM (PERF_COUNT_HW_MAX + 2) +#define PERF_COUNT_ARC_BPOK (PERF_COUNT_HW_MAX + 3) +#define PERF_COUNT_ARC_EDTLB (PERF_COUNT_HW_MAX + 4) +#define PERF_COUNT_ARC_EITLB (PERF_COUNT_HW_MAX + 5) +#define PERF_COUNT_ARC_LDC (PERF_COUNT_HW_MAX + 6) +#define PERF_COUNT_ARC_STC (PERF_COUNT_HW_MAX + 7) + +#define PERF_COUNT_ARC_HW_MAX (PERF_COUNT_HW_MAX + 8) + +#ifdef CONFIG_PERF_EVENTS +#define perf_arch_bpf_user_pt_regs(regs) (struct user_regs_struct *)regs +#endif + +#endif /* __ASM_PERF_EVENT_H */ diff --git a/arch/arc/include/asm/pgalloc.h b/arch/arc/include/asm/pgalloc.h new file mode 100644 index 0000000000..096b8ef58e --- /dev/null +++ b/arch/arc/include/asm/pgalloc.h @@ -0,0 +1,97 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * vineetg: June 2011 + * -"/proc/meminfo | grep PageTables" kept on increasing + * Recently added pgtable dtor was not getting called. + * + * vineetg: May 2011 + * -Variable pg-sz means that Page Tables could be variable sized themselves + * So calculate it based on addr traversal split [pgd-bits:pte-bits:xxx] + * -Page Table size capped to max 1 to save memory - hence verified. + * -Since these deal with constants, gcc compile-time optimizes them. + * + * vineetg: Nov 2010 + * -Added pgtable ctor/dtor used for pgtable mem accounting + * + * vineetg: April 2010 + * -Switched pgtable_t from being struct page * to unsigned long + * =Needed so that Page Table allocator (pte_alloc_one) is not forced to + * deal with struct page. That way in future we can make it allocate + * multiple PG Tbls in one Page Frame + * =sweet side effect is avoiding calls to ugly page_address( ) from the + * pg-tlb allocator sub-sys (pte_alloc_one, ptr_free, pmd_populate) + * + * Amit Bhor, Sameer Dhavale: Codito Technologies 2004 + */ + +#ifndef _ASM_ARC_PGALLOC_H +#define _ASM_ARC_PGALLOC_H + +#include <linux/mm.h> +#include <linux/log2.h> +#include <asm-generic/pgalloc.h> + +static inline void +pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte) +{ + /* + * The cast to long below is OK in 32-bit PAE40 regime with long long pte + * Despite "wider" pte, the pte table needs to be in non-PAE low memory + * as all higher levels can only hold long pointers. + * + * The cast itself is needed given simplistic definition of set_pmd() + */ + set_pmd(pmd, __pmd((unsigned long)pte)); +} + +static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t pte_page) +{ + set_pmd(pmd, __pmd((unsigned long)page_address(pte_page))); +} + +static inline pgd_t *pgd_alloc(struct mm_struct *mm) +{ + pgd_t *ret = (pgd_t *) __get_free_page(GFP_KERNEL); + + if (ret) { + int num, num2; + num = USER_PTRS_PER_PGD + USER_KERNEL_GUTTER / PGDIR_SIZE; + memzero(ret, num * sizeof(pgd_t)); + + num2 = VMALLOC_SIZE / PGDIR_SIZE; + memcpy(ret + num, swapper_pg_dir + num, num2 * sizeof(pgd_t)); + + memzero(ret + num + num2, + (PTRS_PER_PGD - num - num2) * sizeof(pgd_t)); + + } + return ret; +} + +#if CONFIG_PGTABLE_LEVELS > 3 + +static inline void p4d_populate(struct mm_struct *mm, p4d_t *p4dp, pud_t *pudp) +{ + set_p4d(p4dp, __p4d((unsigned long)pudp)); +} + +#define __pud_free_tlb(tlb, pmd, addr) pud_free((tlb)->mm, pmd) + +#endif + +#if CONFIG_PGTABLE_LEVELS > 2 + +static inline void pud_populate(struct mm_struct *mm, pud_t *pudp, pmd_t *pmdp) +{ + set_pud(pudp, __pud((unsigned long)pmdp)); +} + +#define __pmd_free_tlb(tlb, pmd, addr) pmd_free((tlb)->mm, pmd) + +#endif + +#define __pte_free_tlb(tlb, pte, addr) pte_free((tlb)->mm, pte) + +#endif /* _ASM_ARC_PGALLOC_H */ diff --git a/arch/arc/include/asm/pgtable-bits-arcv2.h b/arch/arc/include/asm/pgtable-bits-arcv2.h new file mode 100644 index 0000000000..f3eea3f30b --- /dev/null +++ b/arch/arc/include/asm/pgtable-bits-arcv2.h @@ -0,0 +1,147 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +/* + * page table flags for software walked/managed MMUv3 (ARC700) and MMUv4 (HS) + * There correspond to the corresponding bits in the TLB + */ + +#ifndef _ASM_ARC_PGTABLE_BITS_ARCV2_H +#define _ASM_ARC_PGTABLE_BITS_ARCV2_H + +#ifdef CONFIG_ARC_CACHE_PAGES +#define _PAGE_CACHEABLE (1 << 0) /* Cached (H) */ +#else +#define _PAGE_CACHEABLE 0 +#endif + +#define _PAGE_EXECUTE (1 << 1) /* User Execute (H) */ +#define _PAGE_WRITE (1 << 2) /* User Write (H) */ +#define _PAGE_READ (1 << 3) /* User Read (H) */ +#define _PAGE_ACCESSED (1 << 4) /* Accessed (s) */ +#define _PAGE_DIRTY (1 << 5) /* Modified (s) */ +#define _PAGE_SPECIAL (1 << 6) +#define _PAGE_GLOBAL (1 << 8) /* ASID agnostic (H) */ +#define _PAGE_PRESENT (1 << 9) /* PTE/TLB Valid (H) */ + +/* We borrow bit 5 to store the exclusive marker in swap PTEs. */ +#define _PAGE_SWP_EXCLUSIVE _PAGE_DIRTY + +#ifdef CONFIG_ARC_MMU_V4 +#define _PAGE_HW_SZ (1 << 10) /* Normal/super (H) */ +#else +#define _PAGE_HW_SZ 0 +#endif + +/* Defaults for every user page */ +#define ___DEF (_PAGE_PRESENT | _PAGE_CACHEABLE) + +/* Set of bits not changed in pte_modify */ +#define _PAGE_CHG_MASK (PAGE_MASK_PHYS | _PAGE_ACCESSED | _PAGE_DIRTY | \ + _PAGE_SPECIAL) + +/* More Abbrevaited helpers */ +#define PAGE_U_NONE __pgprot(___DEF) +#define PAGE_U_R __pgprot(___DEF | _PAGE_READ) +#define PAGE_U_W_R __pgprot(___DEF | _PAGE_READ | _PAGE_WRITE) +#define PAGE_U_X_R __pgprot(___DEF | _PAGE_READ | _PAGE_EXECUTE) +#define PAGE_U_X_W_R __pgprot(___DEF \ + | _PAGE_READ | _PAGE_WRITE | _PAGE_EXECUTE) +#define PAGE_KERNEL __pgprot(___DEF | _PAGE_GLOBAL \ + | _PAGE_READ | _PAGE_WRITE | _PAGE_EXECUTE) + +#define PAGE_SHARED PAGE_U_W_R + +#define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) & ~_PAGE_CACHEABLE)) + +/* + * Mapping of vm_flags (Generic VM) to PTE flags (arch specific) + * + * Certain cases have 1:1 mapping + * e.g. __P101 means VM_READ, VM_EXEC and !VM_SHARED + * which directly corresponds to PAGE_U_X_R + * + * Other rules which cause the divergence from 1:1 mapping + * + * 1. Although ARC700 can do exclusive execute/write protection (meaning R + * can be tracked independet of X/W unlike some other CPUs), still to + * keep things consistent with other archs: + * -Write implies Read: W => R + * -Execute implies Read: X => R + * + * 2. Pvt Writable doesn't have Write Enabled initially: Pvt-W => !W + * This is to enable COW mechanism + */ + /* xwr */ +#ifndef __ASSEMBLY__ + +#define pte_write(pte) (pte_val(pte) & _PAGE_WRITE) +#define pte_dirty(pte) (pte_val(pte) & _PAGE_DIRTY) +#define pte_young(pte) (pte_val(pte) & _PAGE_ACCESSED) +#define pte_special(pte) (pte_val(pte) & _PAGE_SPECIAL) + +#define PTE_BIT_FUNC(fn, op) \ + static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; } + +PTE_BIT_FUNC(mknotpresent, &= ~(_PAGE_PRESENT)); +PTE_BIT_FUNC(wrprotect, &= ~(_PAGE_WRITE)); +PTE_BIT_FUNC(mkwrite_novma, |= (_PAGE_WRITE)); +PTE_BIT_FUNC(mkclean, &= ~(_PAGE_DIRTY)); +PTE_BIT_FUNC(mkdirty, |= (_PAGE_DIRTY)); +PTE_BIT_FUNC(mkold, &= ~(_PAGE_ACCESSED)); +PTE_BIT_FUNC(mkyoung, |= (_PAGE_ACCESSED)); +PTE_BIT_FUNC(mkspecial, |= (_PAGE_SPECIAL)); +PTE_BIT_FUNC(mkhuge, |= (_PAGE_HW_SZ)); + +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ + return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot)); +} + +struct vm_fault; +void update_mmu_cache_range(struct vm_fault *vmf, struct vm_area_struct *vma, + unsigned long address, pte_t *ptep, unsigned int nr); + +#define update_mmu_cache(vma, addr, ptep) \ + update_mmu_cache_range(NULL, vma, addr, ptep, 1) + +/* + * Encode/decode swap entries and swap PTEs. Swap PTEs are all PTEs that + * are !pte_none() && !pte_present(). + * + * Format of swap PTEs: + * + * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * <-------------- offset -------------> <--- zero --> E < type -> + * + * E is the exclusive marker that is not stored in swap entries. + * The zero'ed bits include _PAGE_PRESENT. + */ +#define __swp_entry(type, off) ((swp_entry_t) \ + { ((type) & 0x1f) | ((off) << 13) }) + +/* Decode a PTE containing swap "identifier "into constituents */ +#define __swp_type(pte_lookalike) (((pte_lookalike).val) & 0x1f) +#define __swp_offset(pte_lookalike) ((pte_lookalike).val >> 13) + +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) + +static inline int pte_swp_exclusive(pte_t pte) +{ + return pte_val(pte) & _PAGE_SWP_EXCLUSIVE; +} + +PTE_BIT_FUNC(swp_mkexclusive, |= (_PAGE_SWP_EXCLUSIVE)); +PTE_BIT_FUNC(swp_clear_exclusive, &= ~(_PAGE_SWP_EXCLUSIVE)); + +#ifdef CONFIG_TRANSPARENT_HUGEPAGE +#include <asm/hugepage.h> +#endif + +#endif /* __ASSEMBLY__ */ + +#endif diff --git a/arch/arc/include/asm/pgtable-levels.h b/arch/arc/include/asm/pgtable-levels.h new file mode 100644 index 0000000000..fc417c75c2 --- /dev/null +++ b/arch/arc/include/asm/pgtable-levels.h @@ -0,0 +1,188 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2020 Synopsys, Inc. (www.synopsys.com) + */ + +/* + * Helpers for implemenintg paging levels + */ + +#ifndef _ASM_ARC_PGTABLE_LEVELS_H +#define _ASM_ARC_PGTABLE_LEVELS_H + +#if CONFIG_PGTABLE_LEVELS == 2 + +/* + * 2 level paging setup for software walked MMUv3 (ARC700) and MMUv4 (HS) + * + * [31] 32 bit virtual address [0] + * ------------------------------------------------------- + * | | <---------- PGDIR_SHIFT ----------> | + * | | | <-- PAGE_SHIFT --> | + * ------------------------------------------------------- + * | | | + * | | --> off in page frame + * | ---> index into Page Table + * ----> index into Page Directory + * + * Given software walk, the vaddr split is arbitrary set to 11:8:13 + * However enabling of super page in a 2 level regime pegs PGDIR_SHIFT to + * super page size. + */ + +#if defined(CONFIG_ARC_HUGEPAGE_16M) +#define PGDIR_SHIFT 24 +#elif defined(CONFIG_ARC_HUGEPAGE_2M) +#define PGDIR_SHIFT 21 +#else +/* + * No Super page case + * Default value provides 11:8:13 (8K), 10:10:12 (4K) + * Limits imposed by pgtable_t only PAGE_SIZE long + * (so 4K page can only have 1K entries: or 10 bits) + */ +#ifdef CONFIG_ARC_PAGE_SIZE_4K +#define PGDIR_SHIFT 22 +#else +#define PGDIR_SHIFT 21 +#endif + +#endif + +#else /* CONFIG_PGTABLE_LEVELS != 2 */ + +/* + * A default 3 level paging testing setup in software walked MMU + * MMUv4 (8K page): <4> : <7> : <8> : <13> + * A default 4 level paging testing setup in software walked MMU + * MMUv4 (8K page): <4> : <3> : <4> : <8> : <13> + */ +#define PGDIR_SHIFT 28 +#if CONFIG_PGTABLE_LEVELS > 3 +#define PUD_SHIFT 25 +#endif +#if CONFIG_PGTABLE_LEVELS > 2 +#define PMD_SHIFT 21 +#endif + +#endif /* CONFIG_PGTABLE_LEVELS */ + +#define PGDIR_SIZE BIT(PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE - 1)) +#define PTRS_PER_PGD BIT(32 - PGDIR_SHIFT) + +#if CONFIG_PGTABLE_LEVELS > 3 +#define PUD_SIZE BIT(PUD_SHIFT) +#define PUD_MASK (~(PUD_SIZE - 1)) +#define PTRS_PER_PUD BIT(PGDIR_SHIFT - PUD_SHIFT) +#endif + +#if CONFIG_PGTABLE_LEVELS > 2 +#define PMD_SIZE BIT(PMD_SHIFT) +#define PMD_MASK (~(PMD_SIZE - 1)) +#define PTRS_PER_PMD BIT(PUD_SHIFT - PMD_SHIFT) +#endif + +#define PTRS_PER_PTE BIT(PMD_SHIFT - PAGE_SHIFT) + +#ifndef __ASSEMBLY__ + +#if CONFIG_PGTABLE_LEVELS > 3 +#include <asm-generic/pgtable-nop4d.h> +#elif CONFIG_PGTABLE_LEVELS > 2 +#include <asm-generic/pgtable-nopud.h> +#else +#include <asm-generic/pgtable-nopmd.h> +#endif + +/* + * 1st level paging: pgd + */ +#define pgd_ERROR(e) \ + pr_crit("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) + +#if CONFIG_PGTABLE_LEVELS > 3 + +/* In 4 level paging, p4d_* macros work on pgd */ +#define p4d_none(x) (!p4d_val(x)) +#define p4d_bad(x) ((p4d_val(x) & ~PAGE_MASK)) +#define p4d_present(x) (p4d_val(x)) +#define p4d_clear(xp) do { p4d_val(*(xp)) = 0; } while (0) +#define p4d_pgtable(p4d) ((pud_t *)(p4d_val(p4d) & PAGE_MASK)) +#define p4d_page(p4d) virt_to_page(p4d_pgtable(p4d)) +#define set_p4d(p4dp, p4d) (*(p4dp) = p4d) + +/* + * 2nd level paging: pud + */ +#define pud_ERROR(e) \ + pr_crit("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pud_val(e)) + +#endif + +#if CONFIG_PGTABLE_LEVELS > 2 + +/* + * In 3 level paging, pud_* macros work on pgd + * In 4 level paging, pud_* macros work on pud + */ +#define pud_none(x) (!pud_val(x)) +#define pud_bad(x) ((pud_val(x) & ~PAGE_MASK)) +#define pud_present(x) (pud_val(x)) +#define pud_clear(xp) do { pud_val(*(xp)) = 0; } while (0) +#define pud_pgtable(pud) ((pmd_t *)(pud_val(pud) & PAGE_MASK)) +#define pud_page(pud) virt_to_page(pud_pgtable(pud)) +#define set_pud(pudp, pud) (*(pudp) = pud) + +/* + * 3rd level paging: pmd + */ +#define pmd_ERROR(e) \ + pr_crit("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e)) + +#define pmd_pfn(pmd) ((pmd_val(pmd) & PMD_MASK) >> PAGE_SHIFT) +#define pfn_pmd(pfn,prot) __pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) +#define mk_pmd(page,prot) pfn_pmd(page_to_pfn(page),prot) + +#endif + +/* + * Due to the strange way generic pgtable level folding works, the pmd_* macros + * - are valid even for 2 levels (which supposedly only has pgd - pte) + * - behave differently for 2 vs. 3 + * In 2 level paging (pgd -> pte), pmd_* macros work on pgd + * In 3+ level paging (pgd -> pmd -> pte), pmd_* macros work on pmd + */ +#define pmd_none(x) (!pmd_val(x)) +#define pmd_bad(x) ((pmd_val(x) & ~PAGE_MASK)) +#define pmd_present(x) (pmd_val(x)) +#define pmd_clear(xp) do { pmd_val(*(xp)) = 0; } while (0) +#define pmd_page_vaddr(pmd) (pmd_val(pmd) & PAGE_MASK) +#define pmd_pfn(pmd) ((pmd_val(pmd) & PAGE_MASK) >> PAGE_SHIFT) +#define pmd_page(pmd) virt_to_page(pmd_page_vaddr(pmd)) +#define set_pmd(pmdp, pmd) (*(pmdp) = pmd) +#define pmd_pgtable(pmd) ((pgtable_t) pmd_page(pmd)) + +/* + * 4th level paging: pte + */ +#define pte_ERROR(e) \ + pr_crit("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) + +#define PFN_PTE_SHIFT PAGE_SHIFT +#define pte_none(x) (!pte_val(x)) +#define pte_present(x) (pte_val(x) & _PAGE_PRESENT) +#define pte_clear(mm,addr,ptep) set_pte_at(mm, addr, ptep, __pte(0)) +#define pte_page(pte) pfn_to_page(pte_pfn(pte)) +#define set_pte(ptep, pte) ((*(ptep)) = (pte)) +#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT) +#define pfn_pte(pfn, prot) __pte(__pfn_to_phys(pfn) | pgprot_val(prot)) +#define mk_pte(page, prot) pfn_pte(page_to_pfn(page), prot) + +#ifdef CONFIG_ISA_ARCV2 +#define pmd_leaf(x) (pmd_val(x) & _PAGE_HW_SZ) +#endif + +#endif /* !__ASSEMBLY__ */ + +#endif diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h new file mode 100644 index 0000000000..4cf45a99fd --- /dev/null +++ b/arch/arc/include/asm/pgtable.h @@ -0,0 +1,34 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef _ASM_ARC_PGTABLE_H +#define _ASM_ARC_PGTABLE_H + +#include <linux/bits.h> + +#include <asm/pgtable-levels.h> +#include <asm/pgtable-bits-arcv2.h> +#include <asm/page.h> +#include <asm/mmu.h> + +/* + * Number of entries a user land program use. + * TASK_SIZE is the maximum vaddr that can be used by a userland program. + */ +#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) + +#ifndef __ASSEMBLY__ + +extern char empty_zero_page[PAGE_SIZE]; +#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) + +extern pgd_t swapper_pg_dir[] __aligned(PAGE_SIZE); + +/* to cope with aliasing VIPT cache */ +#define HAVE_ARCH_UNMAPPED_AREA + +#endif /* __ASSEMBLY__ */ + +#endif diff --git a/arch/arc/include/asm/processor.h b/arch/arc/include/asm/processor.h new file mode 100644 index 0000000000..d606658e2f --- /dev/null +++ b/arch/arc/include/asm/processor.h @@ -0,0 +1,104 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * vineetg: March 2009 + * -Implemented task_pt_regs( ) + * + * Amit Bhor, Sameer Dhavale, Ashwin Chaugule: Codito Technologies 2004 + */ + +#ifndef __ASM_ARC_PROCESSOR_H +#define __ASM_ARC_PROCESSOR_H + +#ifndef __ASSEMBLY__ + +#include <asm/ptrace.h> +#include <asm/dsp.h> +#include <asm/fpu.h> + +/* Arch specific stuff which needs to be saved per task. + * However these items are not so important so as to earn a place in + * struct thread_info + */ +struct thread_struct { + unsigned long callee_reg; /* pointer to callee regs */ + unsigned long fault_address; /* dbls as brkpt holder as well */ +#ifdef CONFIG_ARC_DSP_SAVE_RESTORE_REGS + struct dsp_callee_regs dsp; +#endif +#ifdef CONFIG_ARC_FPU_SAVE_RESTORE + struct arc_fpu fpu; +#endif +}; + +#define INIT_THREAD { } + +/* Forward declaration, a strange C thing */ +struct task_struct; + +#define task_pt_regs(p) \ + ((struct pt_regs *)(THREAD_SIZE + (void *)task_stack_page(p)) - 1) + +/* + * A lot of busy-wait loops in SMP are based off of non-volatile data otherwise + * get optimised away by gcc + */ +#define cpu_relax() barrier() + +#define KSTK_EIP(tsk) (task_pt_regs(tsk)->ret) +#define KSTK_ESP(tsk) (task_pt_regs(tsk)->sp) + +/* + * Where about of Task's sp, fp, blink when it was last seen in kernel mode. + * Look in process.c for details of kernel stack layout + */ +#define TSK_K_ESP(tsk) (task_thread_info(tsk)->ksp) + +#define TSK_K_REG(tsk, off) (*((unsigned long *)(TSK_K_ESP(tsk) + \ + sizeof(struct callee_regs) + off))) + +#define TSK_K_BLINK(tsk) TSK_K_REG(tsk, 4) +#define TSK_K_FP(tsk) TSK_K_REG(tsk, 0) + +extern void start_thread(struct pt_regs * regs, unsigned long pc, + unsigned long usp); + +extern unsigned int __get_wchan(struct task_struct *p); + +#endif /* !__ASSEMBLY__ */ + +/* + * Default System Memory Map on ARC + * + * ---------------------------- (lower 2G, Translated) ------------------------- + * 0x0000_0000 0x5FFF_FFFF (user vaddr: TASK_SIZE) + * 0x6000_0000 0x6FFF_FFFF (reserved gutter between U/K) + * 0x7000_0000 0x7FFF_FFFF (kvaddr: vmalloc/modules/pkmap..) + * + * PAGE_OFFSET ---------------- (Upper 2G, Untranslated) ----------------------- + * 0x8000_0000 0xBFFF_FFFF (kernel direct mapped) + * 0xC000_0000 0xFFFF_FFFF (peripheral uncached space) + * ----------------------------------------------------------------------------- + */ + +#define TASK_SIZE 0x60000000 + +#define VMALLOC_START (PAGE_OFFSET - (CONFIG_ARC_KVADDR_SIZE << 20)) + +/* 1 PGDIR_SIZE each for fixmap/pkmap, 2 PGDIR_SIZE gutter (see asm/highmem.h) */ +#define VMALLOC_SIZE ((CONFIG_ARC_KVADDR_SIZE << 20) - PMD_SIZE * 4) + +#define VMALLOC_END (VMALLOC_START + VMALLOC_SIZE) + +#define USER_KERNEL_GUTTER (VMALLOC_START - TASK_SIZE) + +#define STACK_TOP TASK_SIZE +#define STACK_TOP_MAX STACK_TOP + +/* This decides where the kernel will search for a free chunk of vm + * space during mmap's. + */ +#define TASK_UNMAPPED_BASE (TASK_SIZE / 3) + +#endif /* __ASM_ARC_PROCESSOR_H */ diff --git a/arch/arc/include/asm/ptrace.h b/arch/arc/include/asm/ptrace.h new file mode 100644 index 0000000000..4a2b30fb5a --- /dev/null +++ b/arch/arc/include/asm/ptrace.h @@ -0,0 +1,175 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * Amit Bhor, Sameer Dhavale: Codito Technologies 2004 + */ +#ifndef __ASM_ARC_PTRACE_H +#define __ASM_ARC_PTRACE_H + +#include <uapi/asm/ptrace.h> +#include <linux/compiler.h> + +#ifndef __ASSEMBLY__ + +typedef union { + struct { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned long state:8, vec:8, cause:8, param:8; +#else + unsigned long param:8, cause:8, vec:8, state:8; +#endif + }; + unsigned long full; +} ecr_reg; + +/* THE pt_regs: Defines how regs are saved during entry into kernel */ + +#ifdef CONFIG_ISA_ARCOMPACT +struct pt_regs { + + /* Real registers */ + unsigned long bta; /* bta_l1, bta_l2, erbta */ + + unsigned long lp_start, lp_end, lp_count; + + unsigned long status32; /* status32_l1, status32_l2, erstatus */ + unsigned long ret; /* ilink1, ilink2 or eret */ + unsigned long blink; + unsigned long fp; + unsigned long r26; /* gp */ + + unsigned long r12, r11, r10, r9, r8, r7, r6, r5, r4, r3, r2, r1, r0; + + unsigned long sp; /* User/Kernel depending on where we came from */ + unsigned long orig_r0; + + /* + * To distinguish bet excp, syscall, irq + * For traps and exceptions, Exception Cause Register. + * ECR: <00> <VV> <CC> <PP> + * Last word used by Linux for extra state mgmt (syscall-restart) + * For interrupts, use artificial ECR values to note current prio-level + */ + ecr_reg ecr; +}; + +#define MAX_REG_OFFSET offsetof(struct pt_regs, ecr) + +#else + +struct pt_regs { + + unsigned long orig_r0; + + ecr_reg ecr; /* Exception Cause Reg */ + + unsigned long bta; /* erbta */ + + unsigned long fp; + unsigned long r30; + unsigned long r12; + unsigned long r26; /* gp */ + +#ifdef CONFIG_ARC_HAS_ACCL_REGS + unsigned long r58, r59; /* ACCL/ACCH used by FPU / DSP MPY */ +#endif +#ifdef CONFIG_ARC_DSP_SAVE_RESTORE_REGS + unsigned long DSP_CTRL; +#endif + + unsigned long sp; /* user/kernel sp depending on entry */ + + /*------- Below list auto saved by h/w -----------*/ + unsigned long r0, r1, r2, r3, r4, r5, r6, r7, r8, r9, r10, r11; + + unsigned long blink; + unsigned long lp_end, lp_start, lp_count; + + unsigned long ei, ldi, jli; + + unsigned long ret; + unsigned long status32; +}; + +#define MAX_REG_OFFSET offsetof(struct pt_regs, status32) + +#endif + +/* Callee saved registers - need to be saved only when you are scheduled out */ + +struct callee_regs { + unsigned long r25, r24, r23, r22, r21, r20, r19, r18, r17, r16, r15, r14, r13; +}; + +#define instruction_pointer(regs) ((regs)->ret) +#define profile_pc(regs) instruction_pointer(regs) + +/* return 1 if user mode or 0 if kernel mode */ +#define user_mode(regs) (regs->status32 & STATUS_U_MASK) + +#define user_stack_pointer(regs)\ +({ unsigned int sp; \ + if (user_mode(regs)) \ + sp = (regs)->sp;\ + else \ + sp = -1; \ + sp; \ +}) + +/* return 1 if PC in delay slot */ +#define delay_mode(regs) ((regs->status32 & STATUS_DE_MASK) == STATUS_DE_MASK) + +#define in_syscall(regs) ((regs->ecr.vec == ECR_V_TRAP) && !regs->ecr.param) +#define in_brkpt_trap(regs) ((regs->ecr.vec == ECR_V_TRAP) && regs->ecr.param) + +#define STATE_SCALL_RESTARTED 0x01 + +#define syscall_wont_restart(regs) (regs->ecr.state |= STATE_SCALL_RESTARTED) +#define syscall_restartable(regs) !(regs->ecr.state & STATE_SCALL_RESTARTED) + +#define current_pt_regs() \ +({ \ + /* open-coded current_thread_info() */ \ + register unsigned long sp asm ("sp"); \ + unsigned long pg_start = (sp & ~(THREAD_SIZE - 1)); \ + (struct pt_regs *)(pg_start + THREAD_SIZE) - 1; \ +}) + +static inline long regs_return_value(struct pt_regs *regs) +{ + return (long)regs->r0; +} + +static inline void instruction_pointer_set(struct pt_regs *regs, + unsigned long val) +{ + instruction_pointer(regs) = val; +} + +static inline unsigned long kernel_stack_pointer(struct pt_regs *regs) +{ + return regs->sp; +} + +extern int regs_query_register_offset(const char *name); +extern const char *regs_query_register_name(unsigned int offset); +extern bool regs_within_kernel_stack(struct pt_regs *regs, unsigned long addr); +extern unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs, + unsigned int n); + +static inline unsigned long regs_get_register(struct pt_regs *regs, + unsigned int offset) +{ + if (unlikely(offset > MAX_REG_OFFSET)) + return 0; + + return *(unsigned long *)((unsigned long)regs + offset); +} + +extern int syscall_trace_entry(struct pt_regs *); +extern void syscall_trace_exit(struct pt_regs *); + +#endif /* !__ASSEMBLY__ */ + +#endif /* __ASM_PTRACE_H */ diff --git a/arch/arc/include/asm/sections.h b/arch/arc/include/asm/sections.h new file mode 100644 index 0000000000..860b4fd67a --- /dev/null +++ b/arch/arc/include/asm/sections.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef _ASM_ARC_SECTIONS_H +#define _ASM_ARC_SECTIONS_H + +#include <asm-generic/sections.h> + +extern char __arc_dccm_base[]; + +#endif diff --git a/arch/arc/include/asm/serial.h b/arch/arc/include/asm/serial.h new file mode 100644 index 0000000000..83062c8b97 --- /dev/null +++ b/arch/arc/include/asm/serial.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef _ASM_ARC_SERIAL_H +#define _ASM_ARC_SERIAL_H + +/* + * early 8250 (now earlycon) requires BASE_BAUD to be defined in this header. + * However to still determine it dynamically (for multi-platform images) + * we do this in a helper by parsing the FDT early + */ + +extern unsigned int __init arc_early_base_baud(void); + +#define BASE_BAUD arc_early_base_baud() + +#endif /* _ASM_ARC_SERIAL_H */ diff --git a/arch/arc/include/asm/setup.h b/arch/arc/include/asm/setup.h new file mode 100644 index 0000000000..1c6db599e1 --- /dev/null +++ b/arch/arc/include/asm/setup.h @@ -0,0 +1,45 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ +#ifndef __ASM_ARC_SETUP_H +#define __ASM_ARC_SETUP_H + + +#include <linux/types.h> +#include <uapi/asm/setup.h> + +#define COMMAND_LINE_SIZE 256 + +/* + * Data structure to map a ID to string + * Used a lot for bootup reporting of hardware diversity + */ +struct id_to_str { + int id; + const char *str; +}; + +extern int root_mountflags, end_mem; + +void setup_processor(void); +void __init setup_arch_memory(void); +long __init arc_get_mem_sz(void); + +/* Helpers used in arc_*_mumbojumbo routines */ +#define IS_AVAIL1(v, s) ((v) ? s : "") +#define IS_DISABLED_RUN(v) ((v) ? "" : "(disabled) ") +#define IS_USED_RUN(v) ((v) ? "" : "(not used) ") +#define IS_USED_CFG(cfg) IS_USED_RUN(IS_ENABLED(cfg)) +#define IS_AVAIL2(v, s, cfg) IS_AVAIL1(v, s), IS_AVAIL1(v, IS_USED_CFG(cfg)) +#define IS_AVAIL3(v, v2, s) IS_AVAIL1(v, s), IS_AVAIL1(v, IS_DISABLED_RUN(v2)) + +extern void arc_mmu_init(void); +extern int arc_mmu_mumbojumbo(int cpu_id, char *buf, int len); + +extern void arc_cache_init(void); +extern int arc_cache_mumbojumbo(int cpu_id, char *buf, int len); + +extern void __init handle_uboot_args(void); + +#endif /* __ASMARC_SETUP_H */ diff --git a/arch/arc/include/asm/shmparam.h b/arch/arc/include/asm/shmparam.h new file mode 100644 index 0000000000..8b0251464f --- /dev/null +++ b/arch/arc/include/asm/shmparam.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef __ARC_ASM_SHMPARAM_H +#define __ARC_ASM_SHMPARAM_H + +/* Handle upto 2 cache bins */ +#define SHMLBA (2 * PAGE_SIZE) + +/* Enforce SHMLBA in shmat */ +#define __ARCH_FORCE_SHMLBA + +#endif diff --git a/arch/arc/include/asm/smp.h b/arch/arc/include/asm/smp.h new file mode 100644 index 0000000000..e0913f52c2 --- /dev/null +++ b/arch/arc/include/asm/smp.h @@ -0,0 +1,130 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef __ASM_ARC_SMP_H +#define __ASM_ARC_SMP_H + +#ifdef CONFIG_SMP + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/threads.h> + +#define raw_smp_processor_id() (current_thread_info()->cpu) + +/* including cpumask.h leads to cyclic deps hence this Forward declaration */ +struct cpumask; + +/* + * APIs provided by arch SMP code to generic code + */ +extern void arch_send_call_function_single_ipi(int cpu); +extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); + +/* + * APIs provided by arch SMP code to rest of arch code + */ +extern void __init smp_init_cpus(void); +extern void first_lines_of_secondary(void); +extern const char *arc_platform_smp_cpuinfo(void); +extern void arc_platform_smp_wait_to_boot(int); +extern void start_kernel_secondary(void); + +/* + * API expected BY platform smp code (FROM arch smp code) + * + * smp_ipi_irq_setup: + * Takes @cpu and @hwirq to which the arch-common ISR is hooked up + */ +extern int smp_ipi_irq_setup(int cpu, irq_hw_number_t hwirq); + +/* + * struct plat_smp_ops - SMP callbacks provided by platform to ARC SMP + * + * @info: SoC SMP specific info for /proc/cpuinfo etc + * @init_early_smp: A SMP specific h/w block can init itself + * Could be common across platforms so not covered by + * mach_desc->init_early() + * @init_per_cpu: Called for each core so SMP h/w block driver can do + * any needed setup per cpu (e.g. IPI request) + * @cpu_kick: For Master to kickstart a cpu (optionally at a PC) + * @ipi_send: To send IPI to a @cpu + * @ips_clear: To clear IPI received at @irq + */ +struct plat_smp_ops { + const char *info; + void (*init_early_smp)(void); + void (*init_per_cpu)(int cpu); + void (*cpu_kick)(int cpu, unsigned long pc); + void (*ipi_send)(int cpu); + void (*ipi_clear)(int irq); +}; + +/* TBD: stop exporting it for direct population by platform */ +extern struct plat_smp_ops plat_smp_ops; + +#else /* CONFIG_SMP */ + +static inline void smp_init_cpus(void) {} +static inline const char *arc_platform_smp_cpuinfo(void) +{ + return ""; +} + +#endif /* !CONFIG_SMP */ + +/* + * ARC700 doesn't support atomic Read-Modify-Write ops. + * Originally Interrupts had to be disabled around code to gaurantee atomicity. + * The LLOCK/SCOND insns allow writing interrupt-hassle-free based atomic ops + * based on retry-if-irq-in-atomic (with hardware assist). + * However despite these, we provide the IRQ disabling variant + * + * (1) These insn were introduced only in 4.10 release. So for older released + * support needed. + * + * (2) In a SMP setup, the LLOCK/SCOND atomicity across CPUs needs to be + * gaurantted by the platform (not something which core handles). + * Assuming a platform won't, SMP Linux needs to use spinlocks + local IRQ + * disabling for atomicity. + * + * However exported spinlock API is not usable due to cyclic hdr deps + * (even after system.h disintegration upstream) + * asm/bitops.h -> linux/spinlock.h -> linux/preempt.h + * -> linux/thread_info.h -> linux/bitops.h -> asm/bitops.h + * + * So the workaround is to use the lowest level arch spinlock API. + * The exported spinlock API is smart enough to be NOP for !CONFIG_SMP, + * but same is not true for ARCH backend, hence the need for 2 variants + */ +#ifndef CONFIG_ARC_HAS_LLSC + +#include <linux/irqflags.h> +#ifdef CONFIG_SMP + +#include <asm/spinlock.h> + +extern arch_spinlock_t smp_atomic_ops_lock; + +#define atomic_ops_lock(flags) do { \ + local_irq_save(flags); \ + arch_spin_lock(&smp_atomic_ops_lock); \ +} while (0) + +#define atomic_ops_unlock(flags) do { \ + arch_spin_unlock(&smp_atomic_ops_lock); \ + local_irq_restore(flags); \ +} while (0) + +#else /* !CONFIG_SMP */ + +#define atomic_ops_lock(flags) local_irq_save(flags) +#define atomic_ops_unlock(flags) local_irq_restore(flags) + +#endif /* !CONFIG_SMP */ + +#endif /* !CONFIG_ARC_HAS_LLSC */ + +#endif diff --git a/arch/arc/include/asm/spinlock.h b/arch/arc/include/asm/spinlock.h new file mode 100644 index 0000000000..1928716089 --- /dev/null +++ b/arch/arc/include/asm/spinlock.h @@ -0,0 +1,382 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef __ASM_SPINLOCK_H +#define __ASM_SPINLOCK_H + +#include <asm/spinlock_types.h> +#include <asm/processor.h> +#include <asm/barrier.h> + +#define arch_spin_is_locked(x) ((x)->slock != __ARCH_SPIN_LOCK_UNLOCKED__) + +#ifdef CONFIG_ARC_HAS_LLSC + +static inline void arch_spin_lock(arch_spinlock_t *lock) +{ + unsigned int val; + + __asm__ __volatile__( + "1: llock %[val], [%[slock]] \n" + " breq %[val], %[LOCKED], 1b \n" /* spin while LOCKED */ + " scond %[LOCKED], [%[slock]] \n" /* acquire */ + " bnz 1b \n" + " \n" + : [val] "=&r" (val) + : [slock] "r" (&(lock->slock)), + [LOCKED] "r" (__ARCH_SPIN_LOCK_LOCKED__) + : "memory", "cc"); + + /* + * ACQUIRE barrier to ensure load/store after taking the lock + * don't "bleed-up" out of the critical section (leak-in is allowed) + * http://www.spinics.net/lists/kernel/msg2010409.html + * + * ARCv2 only has load-load, store-store and all-all barrier + * thus need the full all-all barrier + */ + smp_mb(); +} + +/* 1 - lock taken successfully */ +static inline int arch_spin_trylock(arch_spinlock_t *lock) +{ + unsigned int val, got_it = 0; + + __asm__ __volatile__( + "1: llock %[val], [%[slock]] \n" + " breq %[val], %[LOCKED], 4f \n" /* already LOCKED, just bail */ + " scond %[LOCKED], [%[slock]] \n" /* acquire */ + " bnz 1b \n" + " mov %[got_it], 1 \n" + "4: \n" + " \n" + : [val] "=&r" (val), + [got_it] "+&r" (got_it) + : [slock] "r" (&(lock->slock)), + [LOCKED] "r" (__ARCH_SPIN_LOCK_LOCKED__) + : "memory", "cc"); + + smp_mb(); + + return got_it; +} + +static inline void arch_spin_unlock(arch_spinlock_t *lock) +{ + smp_mb(); + + WRITE_ONCE(lock->slock, __ARCH_SPIN_LOCK_UNLOCKED__); +} + +/* + * Read-write spinlocks, allowing multiple readers but only one writer. + * Unfair locking as Writers could be starved indefinitely by Reader(s) + */ + +static inline void arch_read_lock(arch_rwlock_t *rw) +{ + unsigned int val; + + /* + * zero means writer holds the lock exclusively, deny Reader. + * Otherwise grant lock to first/subseq reader + * + * if (rw->counter > 0) { + * rw->counter--; + * ret = 1; + * } + */ + + __asm__ __volatile__( + "1: llock %[val], [%[rwlock]] \n" + " brls %[val], %[WR_LOCKED], 1b\n" /* <= 0: spin while write locked */ + " sub %[val], %[val], 1 \n" /* reader lock */ + " scond %[val], [%[rwlock]] \n" + " bnz 1b \n" + " \n" + : [val] "=&r" (val) + : [rwlock] "r" (&(rw->counter)), + [WR_LOCKED] "ir" (0) + : "memory", "cc"); + + smp_mb(); +} + +/* 1 - lock taken successfully */ +static inline int arch_read_trylock(arch_rwlock_t *rw) +{ + unsigned int val, got_it = 0; + + __asm__ __volatile__( + "1: llock %[val], [%[rwlock]] \n" + " brls %[val], %[WR_LOCKED], 4f\n" /* <= 0: already write locked, bail */ + " sub %[val], %[val], 1 \n" /* counter-- */ + " scond %[val], [%[rwlock]] \n" + " bnz 1b \n" /* retry if collided with someone */ + " mov %[got_it], 1 \n" + " \n" + "4: ; --- done --- \n" + + : [val] "=&r" (val), + [got_it] "+&r" (got_it) + : [rwlock] "r" (&(rw->counter)), + [WR_LOCKED] "ir" (0) + : "memory", "cc"); + + smp_mb(); + + return got_it; +} + +static inline void arch_write_lock(arch_rwlock_t *rw) +{ + unsigned int val; + + /* + * If reader(s) hold lock (lock < __ARCH_RW_LOCK_UNLOCKED__), + * deny writer. Otherwise if unlocked grant to writer + * Hence the claim that Linux rwlocks are unfair to writers. + * (can be starved for an indefinite time by readers). + * + * if (rw->counter == __ARCH_RW_LOCK_UNLOCKED__) { + * rw->counter = 0; + * ret = 1; + * } + */ + + __asm__ __volatile__( + "1: llock %[val], [%[rwlock]] \n" + " brne %[val], %[UNLOCKED], 1b \n" /* while !UNLOCKED spin */ + " mov %[val], %[WR_LOCKED] \n" + " scond %[val], [%[rwlock]] \n" + " bnz 1b \n" + " \n" + : [val] "=&r" (val) + : [rwlock] "r" (&(rw->counter)), + [UNLOCKED] "ir" (__ARCH_RW_LOCK_UNLOCKED__), + [WR_LOCKED] "ir" (0) + : "memory", "cc"); + + smp_mb(); +} + +/* 1 - lock taken successfully */ +static inline int arch_write_trylock(arch_rwlock_t *rw) +{ + unsigned int val, got_it = 0; + + __asm__ __volatile__( + "1: llock %[val], [%[rwlock]] \n" + " brne %[val], %[UNLOCKED], 4f \n" /* !UNLOCKED, bail */ + " mov %[val], %[WR_LOCKED] \n" + " scond %[val], [%[rwlock]] \n" + " bnz 1b \n" /* retry if collided with someone */ + " mov %[got_it], 1 \n" + " \n" + "4: ; --- done --- \n" + + : [val] "=&r" (val), + [got_it] "+&r" (got_it) + : [rwlock] "r" (&(rw->counter)), + [UNLOCKED] "ir" (__ARCH_RW_LOCK_UNLOCKED__), + [WR_LOCKED] "ir" (0) + : "memory", "cc"); + + smp_mb(); + + return got_it; +} + +static inline void arch_read_unlock(arch_rwlock_t *rw) +{ + unsigned int val; + + smp_mb(); + + /* + * rw->counter++; + */ + __asm__ __volatile__( + "1: llock %[val], [%[rwlock]] \n" + " add %[val], %[val], 1 \n" + " scond %[val], [%[rwlock]] \n" + " bnz 1b \n" + " \n" + : [val] "=&r" (val) + : [rwlock] "r" (&(rw->counter)) + : "memory", "cc"); +} + +static inline void arch_write_unlock(arch_rwlock_t *rw) +{ + smp_mb(); + + WRITE_ONCE(rw->counter, __ARCH_RW_LOCK_UNLOCKED__); +} + +#else /* !CONFIG_ARC_HAS_LLSC */ + +static inline void arch_spin_lock(arch_spinlock_t *lock) +{ + unsigned int val = __ARCH_SPIN_LOCK_LOCKED__; + + /* + * Per lkmm, smp_mb() is only required after _lock (and before_unlock) + * for ACQ and REL semantics respectively. However EX based spinlocks + * need the extra smp_mb to workaround a hardware quirk. + */ + smp_mb(); + + __asm__ __volatile__( + "1: ex %0, [%1] \n" + " breq %0, %2, 1b \n" + : "+&r" (val) + : "r"(&(lock->slock)), "ir"(__ARCH_SPIN_LOCK_LOCKED__) + : "memory"); + + smp_mb(); +} + +/* 1 - lock taken successfully */ +static inline int arch_spin_trylock(arch_spinlock_t *lock) +{ + unsigned int val = __ARCH_SPIN_LOCK_LOCKED__; + + smp_mb(); + + __asm__ __volatile__( + "1: ex %0, [%1] \n" + : "+r" (val) + : "r"(&(lock->slock)) + : "memory"); + + smp_mb(); + + return (val == __ARCH_SPIN_LOCK_UNLOCKED__); +} + +static inline void arch_spin_unlock(arch_spinlock_t *lock) +{ + unsigned int val = __ARCH_SPIN_LOCK_UNLOCKED__; + + /* + * RELEASE barrier: given the instructions avail on ARCv2, full barrier + * is the only option + */ + smp_mb(); + + /* + * EX is not really required here, a simple STore of 0 suffices. + * However this causes tasklist livelocks in SystemC based SMP virtual + * platforms where the systemc core scheduler uses EX as a cue for + * moving to next core. Do a git log of this file for details + */ + __asm__ __volatile__( + " ex %0, [%1] \n" + : "+r" (val) + : "r"(&(lock->slock)) + : "memory"); + + /* + * see pairing version/comment in arch_spin_lock above + */ + smp_mb(); +} + +/* + * Read-write spinlocks, allowing multiple readers but only one writer. + * Unfair locking as Writers could be starved indefinitely by Reader(s) + * + * The spinlock itself is contained in @counter and access to it is + * serialized with @lock_mutex. + */ + +/* 1 - lock taken successfully */ +static inline int arch_read_trylock(arch_rwlock_t *rw) +{ + int ret = 0; + unsigned long flags; + + local_irq_save(flags); + arch_spin_lock(&(rw->lock_mutex)); + + /* + * zero means writer holds the lock exclusively, deny Reader. + * Otherwise grant lock to first/subseq reader + */ + if (rw->counter > 0) { + rw->counter--; + ret = 1; + } + + arch_spin_unlock(&(rw->lock_mutex)); + local_irq_restore(flags); + + return ret; +} + +/* 1 - lock taken successfully */ +static inline int arch_write_trylock(arch_rwlock_t *rw) +{ + int ret = 0; + unsigned long flags; + + local_irq_save(flags); + arch_spin_lock(&(rw->lock_mutex)); + + /* + * If reader(s) hold lock (lock < __ARCH_RW_LOCK_UNLOCKED__), + * deny writer. Otherwise if unlocked grant to writer + * Hence the claim that Linux rwlocks are unfair to writers. + * (can be starved for an indefinite time by readers). + */ + if (rw->counter == __ARCH_RW_LOCK_UNLOCKED__) { + rw->counter = 0; + ret = 1; + } + arch_spin_unlock(&(rw->lock_mutex)); + local_irq_restore(flags); + + return ret; +} + +static inline void arch_read_lock(arch_rwlock_t *rw) +{ + while (!arch_read_trylock(rw)) + cpu_relax(); +} + +static inline void arch_write_lock(arch_rwlock_t *rw) +{ + while (!arch_write_trylock(rw)) + cpu_relax(); +} + +static inline void arch_read_unlock(arch_rwlock_t *rw) +{ + unsigned long flags; + + local_irq_save(flags); + arch_spin_lock(&(rw->lock_mutex)); + rw->counter++; + arch_spin_unlock(&(rw->lock_mutex)); + local_irq_restore(flags); +} + +static inline void arch_write_unlock(arch_rwlock_t *rw) +{ + unsigned long flags; + + local_irq_save(flags); + arch_spin_lock(&(rw->lock_mutex)); + rw->counter = __ARCH_RW_LOCK_UNLOCKED__; + arch_spin_unlock(&(rw->lock_mutex)); + local_irq_restore(flags); +} + +#endif + +#endif /* __ASM_SPINLOCK_H */ diff --git a/arch/arc/include/asm/spinlock_types.h b/arch/arc/include/asm/spinlock_types.h new file mode 100644 index 0000000000..7cd0373998 --- /dev/null +++ b/arch/arc/include/asm/spinlock_types.h @@ -0,0 +1,34 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef __ASM_SPINLOCK_TYPES_H +#define __ASM_SPINLOCK_TYPES_H + +typedef struct { + volatile unsigned int slock; +} arch_spinlock_t; + +#define __ARCH_SPIN_LOCK_UNLOCKED__ 0 +#define __ARCH_SPIN_LOCK_LOCKED__ 1 + +#define __ARCH_SPIN_LOCK_UNLOCKED { __ARCH_SPIN_LOCK_UNLOCKED__ } +#define __ARCH_SPIN_LOCK_LOCKED { __ARCH_SPIN_LOCK_LOCKED__ } + +/* + * Unlocked : 0x0100_0000 + * Read lock(s) : 0x00FF_FFFF to 0x01 (Multiple Readers decrement it) + * Write lock : 0x0, but only if prior value is "unlocked" 0x0100_0000 + */ +typedef struct { + volatile unsigned int counter; +#ifndef CONFIG_ARC_HAS_LLSC + arch_spinlock_t lock_mutex; +#endif +} arch_rwlock_t; + +#define __ARCH_RW_LOCK_UNLOCKED__ 0x01000000 +#define __ARCH_RW_LOCK_UNLOCKED { .counter = __ARCH_RW_LOCK_UNLOCKED__ } + +#endif diff --git a/arch/arc/include/asm/stacktrace.h b/arch/arc/include/asm/stacktrace.h new file mode 100644 index 0000000000..4c50fb003d --- /dev/null +++ b/arch/arc/include/asm/stacktrace.h @@ -0,0 +1,34 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) + * Copyright (C) 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef __ASM_STACKTRACE_H +#define __ASM_STACKTRACE_H + +#include <linux/sched.h> + +/** + * arc_unwind_core - Unwind the kernel mode stack for an execution context + * @tsk: NULL for current task, specific task otherwise + * @regs: pt_regs used to seed the unwinder {SP, FP, BLINK, PC} + * If NULL, use pt_regs of @tsk (if !NULL) otherwise + * use the current values of {SP, FP, BLINK, PC} + * @consumer_fn: Callback invoked for each frame unwound + * Returns 0 to continue unwinding, -1 to stop + * @arg: Arg to callback + * + * Returns the address of first function in stack + * + * Semantics: + * - synchronous unwinding (e.g. dump_stack): @tsk NULL, @regs NULL + * - Asynchronous unwinding of sleeping task: @tsk !NULL, @regs NULL + * - Asynchronous unwinding of intr/excp etc: @tsk !NULL, @regs !NULL + */ +notrace noinline unsigned int arc_unwind_core( + struct task_struct *tsk, struct pt_regs *regs, + int (*consumer_fn) (unsigned int, void *), + void *arg); + +#endif /* __ASM_STACKTRACE_H */ diff --git a/arch/arc/include/asm/string.h b/arch/arc/include/asm/string.h new file mode 100644 index 0000000000..3182ea9dcd --- /dev/null +++ b/arch/arc/include/asm/string.h @@ -0,0 +1,34 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * vineetg: May 2011 + * -We had half-optimised memset/memcpy, got better versions of those + * -Added memcmp, strchr, strcpy, strcmp, strlen + * + * Amit Bhor: Codito Technologies 2004 + */ + +#ifndef _ASM_ARC_STRING_H +#define _ASM_ARC_STRING_H + +#include <linux/types.h> + +#define __HAVE_ARCH_MEMSET +#define __HAVE_ARCH_MEMCPY +#define __HAVE_ARCH_MEMCMP +#define __HAVE_ARCH_STRCHR +#define __HAVE_ARCH_STRCPY +#define __HAVE_ARCH_STRCMP +#define __HAVE_ARCH_STRLEN + +extern void *memset(void *ptr, int, __kernel_size_t); +extern void *memcpy(void *, const void *, __kernel_size_t); +extern void memzero(void *ptr, __kernel_size_t n); +extern int memcmp(const void *, const void *, __kernel_size_t); +extern char *strchr(const char *s, int c); +extern char *strcpy(char *dest, const char *src); +extern int strcmp(const char *cs, const char *ct); +extern __kernel_size_t strlen(const char *); + +#endif /* _ASM_ARC_STRING_H */ diff --git a/arch/arc/include/asm/switch_to.h b/arch/arc/include/asm/switch_to.h new file mode 100644 index 0000000000..1f85de8288 --- /dev/null +++ b/arch/arc/include/asm/switch_to.h @@ -0,0 +1,27 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef _ASM_ARC_SWITCH_TO_H +#define _ASM_ARC_SWITCH_TO_H + +#ifndef __ASSEMBLY__ + +#include <linux/sched.h> +#include <asm/dsp-impl.h> +#include <asm/fpu.h> + +struct task_struct *__switch_to(struct task_struct *p, struct task_struct *n); + +#define switch_to(prev, next, last) \ +do { \ + dsp_save_restore(prev, next); \ + fpu_save_restore(prev, next); \ + last = __switch_to(prev, next);\ + mb(); \ +} while (0) + +#endif + +#endif diff --git a/arch/arc/include/asm/syscall.h b/arch/arc/include/asm/syscall.h new file mode 100644 index 0000000000..9709256e31 --- /dev/null +++ b/arch/arc/include/asm/syscall.h @@ -0,0 +1,80 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef _ASM_ARC_SYSCALL_H +#define _ASM_ARC_SYSCALL_H 1 + +#include <uapi/linux/audit.h> +#include <linux/err.h> +#include <linux/sched.h> +#include <asm/unistd.h> +#include <asm/ptrace.h> /* in_syscall() */ + +extern void *sys_call_table[]; + +static inline long +syscall_get_nr(struct task_struct *task, struct pt_regs *regs) +{ + if (user_mode(regs) && in_syscall(regs)) + return regs->r8; + else + return -1; +} + +static inline void +syscall_rollback(struct task_struct *task, struct pt_regs *regs) +{ + regs->r0 = regs->orig_r0; +} + +static inline long +syscall_get_error(struct task_struct *task, struct pt_regs *regs) +{ + /* 0 if syscall succeeded, otherwise -Errorcode */ + return IS_ERR_VALUE(regs->r0) ? regs->r0 : 0; +} + +static inline long +syscall_get_return_value(struct task_struct *task, struct pt_regs *regs) +{ + return regs->r0; +} + +static inline void +syscall_set_return_value(struct task_struct *task, struct pt_regs *regs, + int error, long val) +{ + regs->r0 = (long) error ?: val; +} + +/* + * @i: argument index [0,5] + * @n: number of arguments; n+i must be [1,6]. + */ +static inline void +syscall_get_arguments(struct task_struct *task, struct pt_regs *regs, + unsigned long *args) +{ + unsigned long *inside_ptregs = &(regs->r0); + unsigned int n = 6; + unsigned int i = 0; + + while (n--) { + args[i++] = (*inside_ptregs); + inside_ptregs--; + } +} + +static inline int +syscall_get_arch(struct task_struct *task) +{ + return IS_ENABLED(CONFIG_ISA_ARCOMPACT) + ? (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) + ? AUDIT_ARCH_ARCOMPACTBE : AUDIT_ARCH_ARCOMPACT) + : (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) + ? AUDIT_ARCH_ARCV2BE : AUDIT_ARCH_ARCV2); +} + +#endif diff --git a/arch/arc/include/asm/syscalls.h b/arch/arc/include/asm/syscalls.h new file mode 100644 index 0000000000..c3f4714a4f --- /dev/null +++ b/arch/arc/include/asm/syscalls.h @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef _ASM_ARC_SYSCALLS_H +#define _ASM_ARC_SYSCALLS_H 1 + +#include <linux/compiler.h> +#include <linux/linkage.h> +#include <linux/types.h> + +int sys_clone_wrapper(int, int, int, int, int); +int sys_clone3_wrapper(void *, size_t); +int sys_cacheflush(uint32_t, uint32_t uint32_t); +int sys_arc_settls(void *); +int sys_arc_gettls(void); +int sys_arc_usr_cmpxchg(int *, int, int); + +#include <asm-generic/syscalls.h> + +#endif diff --git a/arch/arc/include/asm/thread_info.h b/arch/arc/include/asm/thread_info.h new file mode 100644 index 0000000000..4c530cf131 --- /dev/null +++ b/arch/arc/include/asm/thread_info.h @@ -0,0 +1,106 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * Vineetg: Oct 2009 + * No need for ARC specific thread_info allocator (kmalloc/free). This is + * anyways one page allocation, thus slab alloc can be short-circuited and + * the generic version (get_free_page) would be loads better. + * + * Sameer Dhavale: Codito Technologies 2004 + */ + +#ifndef _ASM_THREAD_INFO_H +#define _ASM_THREAD_INFO_H + +#include <asm/page.h> + +#ifdef CONFIG_16KSTACKS +#define THREAD_SIZE_ORDER 1 +#else +#define THREAD_SIZE_ORDER 0 +#endif + +#define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER) +#define THREAD_SHIFT (PAGE_SHIFT << THREAD_SIZE_ORDER) + +#ifndef __ASSEMBLY__ + +#include <linux/thread_info.h> + +/* + * low level task data that entry.S needs immediate access to + * - this struct should fit entirely inside of one cache line + * - this struct shares the supervisor stack pages + * - if the contents of this structure are changed, the assembly constants + * must also be changed + */ +struct thread_info { + unsigned long flags; /* low level flags */ + unsigned long ksp; /* kernel mode stack top in __switch_to */ + int preempt_count; /* 0 => preemptable, <0 => BUG */ + int cpu; /* current CPU */ + unsigned long thr_ptr; /* TLS ptr */ + struct task_struct *task; /* main task structure */ +}; + +/* + * initilaize thread_info for any @tsk + * - this is not related to init_task per se + */ +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .flags = 0, \ + .cpu = 0, \ + .preempt_count = INIT_PREEMPT_COUNT, \ +} + +static inline __attribute_const__ struct thread_info *current_thread_info(void) +{ + register unsigned long sp asm("sp"); + return (struct thread_info *)(sp & ~(THREAD_SIZE - 1)); +} + +#endif /* !__ASSEMBLY__ */ + +/* + * thread information flags + * - these are process state flags that various assembly files may need to + * access + * - pending work-to-be-done flags are in LSW + * - other flags in MSW + */ +#define TIF_RESTORE_SIGMASK 0 /* restore sig mask in do_signal() */ +#define TIF_NOTIFY_RESUME 1 /* resumption notification requested */ +#define TIF_SIGPENDING 2 /* signal pending */ +#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ +#define TIF_SYSCALL_AUDIT 4 /* syscall auditing active */ +#define TIF_NOTIFY_SIGNAL 5 /* signal notifications exist */ +#define TIF_SYSCALL_TRACE 15 /* syscall trace active */ +/* true if poll_idle() is polling TIF_NEED_RESCHED */ +#define TIF_MEMDIE 16 +#define TIF_SYSCALL_TRACEPOINT 17 /* syscall tracepoint instrumentation */ + +#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) +#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME) +#define _TIF_SIGPENDING (1<<TIF_SIGPENDING) +#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED) +#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT) +#define _TIF_NOTIFY_SIGNAL (1<<TIF_NOTIFY_SIGNAL) +#define _TIF_MEMDIE (1<<TIF_MEMDIE) +#define _TIF_SYSCALL_TRACEPOINT (1<<TIF_SYSCALL_TRACEPOINT) + +/* work to do on interrupt/exception return */ +#define _TIF_WORK_MASK (_TIF_NEED_RESCHED | _TIF_SIGPENDING | \ + _TIF_NOTIFY_RESUME | _TIF_NOTIFY_SIGNAL) + +#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_TRACEPOINT) + +/* + * _TIF_ALLWORK_MASK includes SYSCALL_TRACE, but we don't need it. + * SYSCALL_TRACE is anyway separately/unconditionally tested right after a + * syscall, so all that remains to be tested is _TIF_WORK_MASK + */ + +#endif /* _ASM_THREAD_INFO_H */ diff --git a/arch/arc/include/asm/timex.h b/arch/arc/include/asm/timex.h new file mode 100644 index 0000000000..48b3482bc9 --- /dev/null +++ b/arch/arc/include/asm/timex.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef _ASM_ARC_TIMEX_H +#define _ASM_ARC_TIMEX_H + +#define CLOCK_TICK_RATE 80000000 /* slated to be removed */ + +#include <asm-generic/timex.h> + +/* XXX: get_cycles() to be implemented with RTSC insn */ + +#endif /* _ASM_ARC_TIMEX_H */ diff --git a/arch/arc/include/asm/tlb.h b/arch/arc/include/asm/tlb.h new file mode 100644 index 0000000000..975b35d373 --- /dev/null +++ b/arch/arc/include/asm/tlb.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef _ASM_ARC_TLB_H +#define _ASM_ARC_TLB_H + +#include <linux/pagemap.h> +#include <asm-generic/tlb.h> + +#endif /* _ASM_ARC_TLB_H */ diff --git a/arch/arc/include/asm/tlbflush.h b/arch/arc/include/asm/tlbflush.h new file mode 100644 index 0000000000..992a2837a5 --- /dev/null +++ b/arch/arc/include/asm/tlbflush.h @@ -0,0 +1,42 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef __ASM_ARC_TLBFLUSH__ +#define __ASM_ARC_TLBFLUSH__ + +#include <linux/mm.h> + +void local_flush_tlb_all(void); +void local_flush_tlb_mm(struct mm_struct *mm); +void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page); +void local_flush_tlb_kernel_range(unsigned long start, unsigned long end); +void local_flush_tlb_range(struct vm_area_struct *vma, + unsigned long start, unsigned long end); +#ifdef CONFIG_TRANSPARENT_HUGEPAGE +void local_flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end); +#endif + +#ifndef CONFIG_SMP +#define flush_tlb_range(vma, s, e) local_flush_tlb_range(vma, s, e) +#define flush_tlb_page(vma, page) local_flush_tlb_page(vma, page) +#define flush_tlb_kernel_range(s, e) local_flush_tlb_kernel_range(s, e) +#define flush_tlb_all() local_flush_tlb_all() +#define flush_tlb_mm(mm) local_flush_tlb_mm(mm) +#ifdef CONFIG_TRANSPARENT_HUGEPAGE +#define flush_pmd_tlb_range(vma, s, e) local_flush_pmd_tlb_range(vma, s, e) +#endif +#else +extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end); +extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page); +extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); +extern void flush_tlb_all(void); +extern void flush_tlb_mm(struct mm_struct *mm); +#ifdef CONFIG_TRANSPARENT_HUGEPAGE +extern void flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end); +#endif +#endif /* CONFIG_SMP */ +#endif diff --git a/arch/arc/include/asm/uaccess.h b/arch/arc/include/asm/uaccess.h new file mode 100644 index 0000000000..1e8809ea00 --- /dev/null +++ b/arch/arc/include/asm/uaccess.h @@ -0,0 +1,638 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * vineetg: June 2010 + * -__clear_user( ) called multiple times during elf load was byte loop + * converted to do as much word clear as possible. + * + * vineetg: Dec 2009 + * -Hand crafted constant propagation for "constant" copy sizes + * -stock kernel shrunk by 33K at -O3 + * + * vineetg: Sept 2009 + * -Added option to (UN)inline copy_(to|from)_user to reduce code sz + * -kernel shrunk by 200K even at -O3 (gcc 4.2.1) + * -Enabled when doing -Os + * + * Amit Bhor, Sameer Dhavale: Codito Technologies 2004 + */ + +#ifndef _ASM_ARC_UACCESS_H +#define _ASM_ARC_UACCESS_H + +#include <linux/string.h> /* for generic string functions */ + +/*********** Single byte/hword/word copies ******************/ + +#define __get_user_fn(sz, u, k) \ +({ \ + long __ret = 0; /* success by default */ \ + switch (sz) { \ + case 1: __arc_get_user_one(*(k), u, "ldb", __ret); break; \ + case 2: __arc_get_user_one(*(k), u, "ldw", __ret); break; \ + case 4: __arc_get_user_one(*(k), u, "ld", __ret); break; \ + case 8: __arc_get_user_one_64(*(k), u, __ret); break; \ + } \ + __ret; \ +}) + +/* + * Returns 0 on success, -EFAULT if not. + * @ret already contains 0 - given that errors will be less likely + * (hence +r asm constraint below). + * In case of error, fixup code will make it -EFAULT + */ +#define __arc_get_user_one(dst, src, op, ret) \ + __asm__ __volatile__( \ + "1: "op" %1,[%2]\n" \ + "2: ;nop\n" \ + " .section .fixup, \"ax\"\n" \ + " .align 4\n" \ + "3: # return -EFAULT\n" \ + " mov %0, %3\n" \ + " # zero out dst ptr\n" \ + " mov %1, 0\n" \ + " j 2b\n" \ + " .previous\n" \ + " .section __ex_table, \"a\"\n" \ + " .align 4\n" \ + " .word 1b,3b\n" \ + " .previous\n" \ + \ + : "+r" (ret), "=r" (dst) \ + : "r" (src), "ir" (-EFAULT)) + +#define __arc_get_user_one_64(dst, src, ret) \ + __asm__ __volatile__( \ + "1: ld %1,[%2]\n" \ + "4: ld %R1,[%2, 4]\n" \ + "2: ;nop\n" \ + " .section .fixup, \"ax\"\n" \ + " .align 4\n" \ + "3: # return -EFAULT\n" \ + " mov %0, %3\n" \ + " # zero out dst ptr\n" \ + " mov %1, 0\n" \ + " mov %R1, 0\n" \ + " j 2b\n" \ + " .previous\n" \ + " .section __ex_table, \"a\"\n" \ + " .align 4\n" \ + " .word 1b,3b\n" \ + " .word 4b,3b\n" \ + " .previous\n" \ + \ + : "+r" (ret), "=r" (dst) \ + : "r" (src), "ir" (-EFAULT)) + +#define __put_user_fn(sz, u, k) \ +({ \ + long __ret = 0; /* success by default */ \ + switch (sz) { \ + case 1: __arc_put_user_one(*(k), u, "stb", __ret); break; \ + case 2: __arc_put_user_one(*(k), u, "stw", __ret); break; \ + case 4: __arc_put_user_one(*(k), u, "st", __ret); break; \ + case 8: __arc_put_user_one_64(*(k), u, __ret); break; \ + } \ + __ret; \ +}) + +#define __arc_put_user_one(src, dst, op, ret) \ + __asm__ __volatile__( \ + "1: "op" %1,[%2]\n" \ + "2: ;nop\n" \ + " .section .fixup, \"ax\"\n" \ + " .align 4\n" \ + "3: mov %0, %3\n" \ + " j 2b\n" \ + " .previous\n" \ + " .section __ex_table, \"a\"\n" \ + " .align 4\n" \ + " .word 1b,3b\n" \ + " .previous\n" \ + \ + : "+r" (ret) \ + : "r" (src), "r" (dst), "ir" (-EFAULT)) + +#define __arc_put_user_one_64(src, dst, ret) \ + __asm__ __volatile__( \ + "1: st %1,[%2]\n" \ + "4: st %R1,[%2, 4]\n" \ + "2: ;nop\n" \ + " .section .fixup, \"ax\"\n" \ + " .align 4\n" \ + "3: mov %0, %3\n" \ + " j 2b\n" \ + " .previous\n" \ + " .section __ex_table, \"a\"\n" \ + " .align 4\n" \ + " .word 1b,3b\n" \ + " .word 4b,3b\n" \ + " .previous\n" \ + \ + : "+r" (ret) \ + : "r" (src), "r" (dst), "ir" (-EFAULT)) + + +static inline unsigned long +raw_copy_from_user(void *to, const void __user *from, unsigned long n) +{ + long res = 0; + char val; + unsigned long tmp1, tmp2, tmp3, tmp4; + unsigned long orig_n = n; + + if (n == 0) + return 0; + + /* fallback for unaligned access when hardware doesn't support */ + if (!IS_ENABLED(CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS) && + (((unsigned long)to & 0x3) || ((unsigned long)from & 0x3))) { + + unsigned char tmp; + + __asm__ __volatile__ ( + " mov.f lp_count, %0 \n" + " lpnz 2f \n" + "1: ldb.ab %1, [%3, 1] \n" + " stb.ab %1, [%2, 1] \n" + " sub %0,%0,1 \n" + "2: ;nop \n" + " .section .fixup, \"ax\" \n" + " .align 4 \n" + "3: j 2b \n" + " .previous \n" + " .section __ex_table, \"a\" \n" + " .align 4 \n" + " .word 1b, 3b \n" + " .previous \n" + + : "+r" (n), + /* + * Note as an '&' earlyclobber operand to make sure the + * temporary register inside the loop is not the same as + * FROM or TO. + */ + "=&r" (tmp), "+r" (to), "+r" (from) + : + : "lp_count", "memory"); + + return n; + } + + /* + * Hand-crafted constant propagation to reduce code sz of the + * laddered copy 16x,8,4,2,1 + */ + if (__builtin_constant_p(orig_n)) { + res = orig_n; + + if (orig_n / 16) { + orig_n = orig_n % 16; + + __asm__ __volatile__( + " lsr lp_count, %7,4 \n" + " lp 3f \n" + "1: ld.ab %3, [%2, 4] \n" + "11: ld.ab %4, [%2, 4] \n" + "12: ld.ab %5, [%2, 4] \n" + "13: ld.ab %6, [%2, 4] \n" + " st.ab %3, [%1, 4] \n" + " st.ab %4, [%1, 4] \n" + " st.ab %5, [%1, 4] \n" + " st.ab %6, [%1, 4] \n" + " sub %0,%0,16 \n" + "3: ;nop \n" + " .section .fixup, \"ax\" \n" + " .align 4 \n" + "4: j 3b \n" + " .previous \n" + " .section __ex_table, \"a\" \n" + " .align 4 \n" + " .word 1b, 4b \n" + " .word 11b,4b \n" + " .word 12b,4b \n" + " .word 13b,4b \n" + " .previous \n" + : "+r" (res), "+r"(to), "+r"(from), + "=r"(tmp1), "=r"(tmp2), "=r"(tmp3), "=r"(tmp4) + : "ir"(n) + : "lp_count", "memory"); + } + if (orig_n / 8) { + orig_n = orig_n % 8; + + __asm__ __volatile__( + "14: ld.ab %3, [%2,4] \n" + "15: ld.ab %4, [%2,4] \n" + " st.ab %3, [%1,4] \n" + " st.ab %4, [%1,4] \n" + " sub %0,%0,8 \n" + "31: ;nop \n" + " .section .fixup, \"ax\" \n" + " .align 4 \n" + "4: j 31b \n" + " .previous \n" + " .section __ex_table, \"a\" \n" + " .align 4 \n" + " .word 14b,4b \n" + " .word 15b,4b \n" + " .previous \n" + : "+r" (res), "+r"(to), "+r"(from), + "=r"(tmp1), "=r"(tmp2) + : + : "memory"); + } + if (orig_n / 4) { + orig_n = orig_n % 4; + + __asm__ __volatile__( + "16: ld.ab %3, [%2,4] \n" + " st.ab %3, [%1,4] \n" + " sub %0,%0,4 \n" + "32: ;nop \n" + " .section .fixup, \"ax\" \n" + " .align 4 \n" + "4: j 32b \n" + " .previous \n" + " .section __ex_table, \"a\" \n" + " .align 4 \n" + " .word 16b,4b \n" + " .previous \n" + : "+r" (res), "+r"(to), "+r"(from), "=r"(tmp1) + : + : "memory"); + } + if (orig_n / 2) { + orig_n = orig_n % 2; + + __asm__ __volatile__( + "17: ldw.ab %3, [%2,2] \n" + " stw.ab %3, [%1,2] \n" + " sub %0,%0,2 \n" + "33: ;nop \n" + " .section .fixup, \"ax\" \n" + " .align 4 \n" + "4: j 33b \n" + " .previous \n" + " .section __ex_table, \"a\" \n" + " .align 4 \n" + " .word 17b,4b \n" + " .previous \n" + : "+r" (res), "+r"(to), "+r"(from), "=r"(tmp1) + : + : "memory"); + } + if (orig_n & 1) { + __asm__ __volatile__( + "18: ldb.ab %3, [%2,2] \n" + " stb.ab %3, [%1,2] \n" + " sub %0,%0,1 \n" + "34: ; nop \n" + " .section .fixup, \"ax\" \n" + " .align 4 \n" + "4: j 34b \n" + " .previous \n" + " .section __ex_table, \"a\" \n" + " .align 4 \n" + " .word 18b,4b \n" + " .previous \n" + : "+r" (res), "+r"(to), "+r"(from), "=r"(tmp1) + : + : "memory"); + } + } else { /* n is NOT constant, so laddered copy of 16x,8,4,2,1 */ + + __asm__ __volatile__( + " mov %0,%3 \n" + " lsr.f lp_count, %3,4 \n" /* 16x bytes */ + " lpnz 3f \n" + "1: ld.ab %5, [%2, 4] \n" + "11: ld.ab %6, [%2, 4] \n" + "12: ld.ab %7, [%2, 4] \n" + "13: ld.ab %8, [%2, 4] \n" + " st.ab %5, [%1, 4] \n" + " st.ab %6, [%1, 4] \n" + " st.ab %7, [%1, 4] \n" + " st.ab %8, [%1, 4] \n" + " sub %0,%0,16 \n" + "3: and.f %3,%3,0xf \n" /* stragglers */ + " bz 34f \n" + " bbit0 %3,3,31f \n" /* 8 bytes left */ + "14: ld.ab %5, [%2,4] \n" + "15: ld.ab %6, [%2,4] \n" + " st.ab %5, [%1,4] \n" + " st.ab %6, [%1,4] \n" + " sub.f %0,%0,8 \n" + "31: bbit0 %3,2,32f \n" /* 4 bytes left */ + "16: ld.ab %5, [%2,4] \n" + " st.ab %5, [%1,4] \n" + " sub.f %0,%0,4 \n" + "32: bbit0 %3,1,33f \n" /* 2 bytes left */ + "17: ldw.ab %5, [%2,2] \n" + " stw.ab %5, [%1,2] \n" + " sub.f %0,%0,2 \n" + "33: bbit0 %3,0,34f \n" + "18: ldb.ab %5, [%2,1] \n" /* 1 byte left */ + " stb.ab %5, [%1,1] \n" + " sub.f %0,%0,1 \n" + "34: ;nop \n" + " .section .fixup, \"ax\" \n" + " .align 4 \n" + "4: j 34b \n" + " .previous \n" + " .section __ex_table, \"a\" \n" + " .align 4 \n" + " .word 1b, 4b \n" + " .word 11b,4b \n" + " .word 12b,4b \n" + " .word 13b,4b \n" + " .word 14b,4b \n" + " .word 15b,4b \n" + " .word 16b,4b \n" + " .word 17b,4b \n" + " .word 18b,4b \n" + " .previous \n" + : "=r" (res), "+r"(to), "+r"(from), "+r"(n), "=r"(val), + "=r"(tmp1), "=r"(tmp2), "=r"(tmp3), "=r"(tmp4) + : + : "lp_count", "memory"); + } + + return res; +} + +static inline unsigned long +raw_copy_to_user(void __user *to, const void *from, unsigned long n) +{ + long res = 0; + char val; + unsigned long tmp1, tmp2, tmp3, tmp4; + unsigned long orig_n = n; + + if (n == 0) + return 0; + + /* fallback for unaligned access when hardware doesn't support */ + if (!IS_ENABLED(CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS) && + (((unsigned long)to & 0x3) || ((unsigned long)from & 0x3))) { + + unsigned char tmp; + + __asm__ __volatile__( + " mov.f lp_count, %0 \n" + " lpnz 3f \n" + " ldb.ab %1, [%3, 1] \n" + "1: stb.ab %1, [%2, 1] \n" + " sub %0, %0, 1 \n" + "3: ;nop \n" + " .section .fixup, \"ax\" \n" + " .align 4 \n" + "4: j 3b \n" + " .previous \n" + " .section __ex_table, \"a\" \n" + " .align 4 \n" + " .word 1b, 4b \n" + " .previous \n" + + : "+r" (n), + /* Note as an '&' earlyclobber operand to make sure the + * temporary register inside the loop is not the same as + * FROM or TO. + */ + "=&r" (tmp), "+r" (to), "+r" (from) + : + : "lp_count", "memory"); + + return n; + } + + if (__builtin_constant_p(orig_n)) { + res = orig_n; + + if (orig_n / 16) { + orig_n = orig_n % 16; + + __asm__ __volatile__( + " lsr lp_count, %7,4 \n" + " lp 3f \n" + " ld.ab %3, [%2, 4] \n" + " ld.ab %4, [%2, 4] \n" + " ld.ab %5, [%2, 4] \n" + " ld.ab %6, [%2, 4] \n" + "1: st.ab %3, [%1, 4] \n" + "11: st.ab %4, [%1, 4] \n" + "12: st.ab %5, [%1, 4] \n" + "13: st.ab %6, [%1, 4] \n" + " sub %0, %0, 16 \n" + "3:;nop \n" + " .section .fixup, \"ax\" \n" + " .align 4 \n" + "4: j 3b \n" + " .previous \n" + " .section __ex_table, \"a\" \n" + " .align 4 \n" + " .word 1b, 4b \n" + " .word 11b,4b \n" + " .word 12b,4b \n" + " .word 13b,4b \n" + " .previous \n" + : "+r" (res), "+r"(to), "+r"(from), + "=r"(tmp1), "=r"(tmp2), "=r"(tmp3), "=r"(tmp4) + : "ir"(n) + : "lp_count", "memory"); + } + if (orig_n / 8) { + orig_n = orig_n % 8; + + __asm__ __volatile__( + " ld.ab %3, [%2,4] \n" + " ld.ab %4, [%2,4] \n" + "14: st.ab %3, [%1,4] \n" + "15: st.ab %4, [%1,4] \n" + " sub %0, %0, 8 \n" + "31:;nop \n" + " .section .fixup, \"ax\" \n" + " .align 4 \n" + "4: j 31b \n" + " .previous \n" + " .section __ex_table, \"a\" \n" + " .align 4 \n" + " .word 14b,4b \n" + " .word 15b,4b \n" + " .previous \n" + : "+r" (res), "+r"(to), "+r"(from), + "=r"(tmp1), "=r"(tmp2) + : + : "memory"); + } + if (orig_n / 4) { + orig_n = orig_n % 4; + + __asm__ __volatile__( + " ld.ab %3, [%2,4] \n" + "16: st.ab %3, [%1,4] \n" + " sub %0, %0, 4 \n" + "32:;nop \n" + " .section .fixup, \"ax\" \n" + " .align 4 \n" + "4: j 32b \n" + " .previous \n" + " .section __ex_table, \"a\" \n" + " .align 4 \n" + " .word 16b,4b \n" + " .previous \n" + : "+r" (res), "+r"(to), "+r"(from), "=r"(tmp1) + : + : "memory"); + } + if (orig_n / 2) { + orig_n = orig_n % 2; + + __asm__ __volatile__( + " ldw.ab %3, [%2,2] \n" + "17: stw.ab %3, [%1,2] \n" + " sub %0, %0, 2 \n" + "33:;nop \n" + " .section .fixup, \"ax\" \n" + " .align 4 \n" + "4: j 33b \n" + " .previous \n" + " .section __ex_table, \"a\" \n" + " .align 4 \n" + " .word 17b,4b \n" + " .previous \n" + : "+r" (res), "+r"(to), "+r"(from), "=r"(tmp1) + : + : "memory"); + } + if (orig_n & 1) { + __asm__ __volatile__( + " ldb.ab %3, [%2,1] \n" + "18: stb.ab %3, [%1,1] \n" + " sub %0, %0, 1 \n" + "34: ;nop \n" + " .section .fixup, \"ax\" \n" + " .align 4 \n" + "4: j 34b \n" + " .previous \n" + " .section __ex_table, \"a\" \n" + " .align 4 \n" + " .word 18b,4b \n" + " .previous \n" + : "+r" (res), "+r"(to), "+r"(from), "=r"(tmp1) + : + : "memory"); + } + } else { /* n is NOT constant, so laddered copy of 16x,8,4,2,1 */ + + __asm__ __volatile__( + " mov %0,%3 \n" + " lsr.f lp_count, %3,4 \n" /* 16x bytes */ + " lpnz 3f \n" + " ld.ab %5, [%2, 4] \n" + " ld.ab %6, [%2, 4] \n" + " ld.ab %7, [%2, 4] \n" + " ld.ab %8, [%2, 4] \n" + "1: st.ab %5, [%1, 4] \n" + "11: st.ab %6, [%1, 4] \n" + "12: st.ab %7, [%1, 4] \n" + "13: st.ab %8, [%1, 4] \n" + " sub %0, %0, 16 \n" + "3: and.f %3,%3,0xf \n" /* stragglers */ + " bz 34f \n" + " bbit0 %3,3,31f \n" /* 8 bytes left */ + " ld.ab %5, [%2,4] \n" + " ld.ab %6, [%2,4] \n" + "14: st.ab %5, [%1,4] \n" + "15: st.ab %6, [%1,4] \n" + " sub.f %0, %0, 8 \n" + "31: bbit0 %3,2,32f \n" /* 4 bytes left */ + " ld.ab %5, [%2,4] \n" + "16: st.ab %5, [%1,4] \n" + " sub.f %0, %0, 4 \n" + "32: bbit0 %3,1,33f \n" /* 2 bytes left */ + " ldw.ab %5, [%2,2] \n" + "17: stw.ab %5, [%1,2] \n" + " sub.f %0, %0, 2 \n" + "33: bbit0 %3,0,34f \n" + " ldb.ab %5, [%2,1] \n" /* 1 byte left */ + "18: stb.ab %5, [%1,1] \n" + " sub.f %0, %0, 1 \n" + "34: ;nop \n" + " .section .fixup, \"ax\" \n" + " .align 4 \n" + "4: j 34b \n" + " .previous \n" + " .section __ex_table, \"a\" \n" + " .align 4 \n" + " .word 1b, 4b \n" + " .word 11b,4b \n" + " .word 12b,4b \n" + " .word 13b,4b \n" + " .word 14b,4b \n" + " .word 15b,4b \n" + " .word 16b,4b \n" + " .word 17b,4b \n" + " .word 18b,4b \n" + " .previous \n" + : "=r" (res), "+r"(to), "+r"(from), "+r"(n), "=r"(val), + "=r"(tmp1), "=r"(tmp2), "=r"(tmp3), "=r"(tmp4) + : + : "lp_count", "memory"); + } + + return res; +} + +static inline unsigned long __clear_user(void __user *to, unsigned long n) +{ + long res = n; + unsigned char *d_char = to; + + __asm__ __volatile__( + " bbit0 %0, 0, 1f \n" + "75: stb.ab %2, [%0,1] \n" + " sub %1, %1, 1 \n" + "1: bbit0 %0, 1, 2f \n" + "76: stw.ab %2, [%0,2] \n" + " sub %1, %1, 2 \n" + "2: asr.f lp_count, %1, 2 \n" + " lpnz 3f \n" + "77: st.ab %2, [%0,4] \n" + " sub %1, %1, 4 \n" + "3: bbit0 %1, 1, 4f \n" + "78: stw.ab %2, [%0,2] \n" + " sub %1, %1, 2 \n" + "4: bbit0 %1, 0, 5f \n" + "79: stb.ab %2, [%0,1] \n" + " sub %1, %1, 1 \n" + "5: \n" + " .section .fixup, \"ax\" \n" + " .align 4 \n" + "3: j 5b \n" + " .previous \n" + " .section __ex_table, \"a\" \n" + " .align 4 \n" + " .word 75b, 3b \n" + " .word 76b, 3b \n" + " .word 77b, 3b \n" + " .word 78b, 3b \n" + " .word 79b, 3b \n" + " .previous \n" + : "+r"(d_char), "+r"(res) + : "i"(0) + : "lp_count", "memory"); + + return res; +} + +#define INLINE_COPY_TO_USER +#define INLINE_COPY_FROM_USER + +#define __clear_user __clear_user + +#include <asm-generic/uaccess.h> + +#endif diff --git a/arch/arc/include/asm/unaligned.h b/arch/arc/include/asm/unaligned.h new file mode 100644 index 0000000000..cf5a02382e --- /dev/null +++ b/arch/arc/include/asm/unaligned.h @@ -0,0 +1,27 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef _ASM_ARC_UNALIGNED_H +#define _ASM_ARC_UNALIGNED_H + +/* ARC700 can't handle unaligned Data accesses. */ + +#include <asm-generic/unaligned.h> +#include <asm/ptrace.h> + +#ifdef CONFIG_ARC_EMUL_UNALIGNED +int misaligned_fixup(unsigned long address, struct pt_regs *regs, + struct callee_regs *cregs); +#else +static inline int +misaligned_fixup(unsigned long address, struct pt_regs *regs, + struct callee_regs *cregs) +{ + /* Not fixed */ + return 1; +} +#endif + +#endif /* _ASM_ARC_UNALIGNED_H */ diff --git a/arch/arc/include/asm/unwind.h b/arch/arc/include/asm/unwind.h new file mode 100644 index 0000000000..e95a20453a --- /dev/null +++ b/arch/arc/include/asm/unwind.h @@ -0,0 +1,156 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#ifndef _ASM_ARC_UNWIND_H +#define _ASM_ARC_UNWIND_H + +#ifdef CONFIG_ARC_DW2_UNWIND + +#include <linux/sched.h> + +struct arc700_regs { + unsigned long r0; + unsigned long r1; + unsigned long r2; + unsigned long r3; + unsigned long r4; + unsigned long r5; + unsigned long r6; + unsigned long r7; + unsigned long r8; + unsigned long r9; + unsigned long r10; + unsigned long r11; + unsigned long r12; + unsigned long r13; + unsigned long r14; + unsigned long r15; + unsigned long r16; + unsigned long r17; + unsigned long r18; + unsigned long r19; + unsigned long r20; + unsigned long r21; + unsigned long r22; + unsigned long r23; + unsigned long r24; + unsigned long r25; + unsigned long r26; + unsigned long r27; /* fp */ + unsigned long r28; /* sp */ + unsigned long r29; + unsigned long r30; + unsigned long r31; /* blink */ + unsigned long r63; /* pc */ +}; + +struct unwind_frame_info { + struct arc700_regs regs; + struct task_struct *task; + unsigned call_frame:1; +}; + +#define UNW_PC(frame) ((frame)->regs.r63) +#define UNW_SP(frame) ((frame)->regs.r28) +#define UNW_BLINK(frame) ((frame)->regs.r31) + +/* Rajesh FIXME */ +#ifdef CONFIG_FRAME_POINTER +#define UNW_FP(frame) ((frame)->regs.r27) +#define FRAME_RETADDR_OFFSET 4 +#define FRAME_LINK_OFFSET 0 +#define STACK_BOTTOM_UNW(tsk) STACK_LIMIT((tsk)->thread.ksp) +#define STACK_TOP_UNW(tsk) ((tsk)->thread.ksp) +#else +#define UNW_FP(frame) ((void)(frame), 0) +#endif + +#define STACK_LIMIT(ptr) (((ptr) - 1) & ~(THREAD_SIZE - 1)) + +#define UNW_REGISTER_INFO \ + PTREGS_INFO(r0), \ + PTREGS_INFO(r1), \ + PTREGS_INFO(r2), \ + PTREGS_INFO(r3), \ + PTREGS_INFO(r4), \ + PTREGS_INFO(r5), \ + PTREGS_INFO(r6), \ + PTREGS_INFO(r7), \ + PTREGS_INFO(r8), \ + PTREGS_INFO(r9), \ + PTREGS_INFO(r10), \ + PTREGS_INFO(r11), \ + PTREGS_INFO(r12), \ + PTREGS_INFO(r13), \ + PTREGS_INFO(r14), \ + PTREGS_INFO(r15), \ + PTREGS_INFO(r16), \ + PTREGS_INFO(r17), \ + PTREGS_INFO(r18), \ + PTREGS_INFO(r19), \ + PTREGS_INFO(r20), \ + PTREGS_INFO(r21), \ + PTREGS_INFO(r22), \ + PTREGS_INFO(r23), \ + PTREGS_INFO(r24), \ + PTREGS_INFO(r25), \ + PTREGS_INFO(r26), \ + PTREGS_INFO(r27), \ + PTREGS_INFO(r28), \ + PTREGS_INFO(r29), \ + PTREGS_INFO(r30), \ + PTREGS_INFO(r31), \ + PTREGS_INFO(r63) + +#define UNW_DEFAULT_RA(raItem, dataAlign) \ + ((raItem).where == Memory && !((raItem).value * (dataAlign) + 4)) + +extern int arc_unwind(struct unwind_frame_info *frame); +extern void arc_unwind_init(void); +extern void *unwind_add_table(struct module *module, const void *table_start, + unsigned long table_size); +extern void unwind_remove_table(void *handle, int init_only); + +static inline int +arch_unwind_init_running(struct unwind_frame_info *info, + int (*callback) (struct unwind_frame_info *info, + void *arg), + void *arg) +{ + return 0; +} + +static inline int arch_unw_user_mode(const struct unwind_frame_info *info) +{ + return 0; +} + +static inline void arch_unw_init_blocked(struct unwind_frame_info *info) +{ + return; +} + +static inline void arch_unw_init_frame_info(struct unwind_frame_info *info, + struct pt_regs *regs) +{ + return; +} + +#else + +#define UNW_PC(frame) ((void)(frame), 0) +#define UNW_SP(frame) ((void)(frame), 0) +#define UNW_FP(frame) ((void)(frame), 0) + +static inline void arc_unwind_init(void) +{ +} + +#define unwind_add_table(a, b, c) +#define unwind_remove_table(a, b) + +#endif /* CONFIG_ARC_DW2_UNWIND */ + +#endif /* _ASM_ARC_UNWIND_H */ diff --git a/arch/arc/include/asm/vermagic.h b/arch/arc/include/asm/vermagic.h new file mode 100644 index 0000000000..a10257d2c6 --- /dev/null +++ b/arch/arc/include/asm/vermagic.h @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef _ASM_VERMAGIC_H +#define _ASM_VERMAGIC_H + +#define MODULE_ARCH_VERMAGIC "ARC700" + +#endif /* _ASM_VERMAGIC_H */ diff --git a/arch/arc/include/asm/vmalloc.h b/arch/arc/include/asm/vmalloc.h new file mode 100644 index 0000000000..973095aad6 --- /dev/null +++ b/arch/arc/include/asm/vmalloc.h @@ -0,0 +1,4 @@ +#ifndef _ASM_ARC_VMALLOC_H +#define _ASM_ARC_VMALLOC_H + +#endif /* _ASM_ARC_VMALLOC_H */ diff --git a/arch/arc/include/uapi/asm/Kbuild b/arch/arc/include/uapi/asm/Kbuild new file mode 100644 index 0000000000..e784701419 --- /dev/null +++ b/arch/arc/include/uapi/asm/Kbuild @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0 +generic-y += ucontext.h diff --git a/arch/arc/include/uapi/asm/bpf_perf_event.h b/arch/arc/include/uapi/asm/bpf_perf_event.h new file mode 100644 index 0000000000..6cb1c28232 --- /dev/null +++ b/arch/arc/include/uapi/asm/bpf_perf_event.h @@ -0,0 +1,9 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _UAPI__ASM_BPF_PERF_EVENT_H__ +#define _UAPI__ASM_BPF_PERF_EVENT_H__ + +#include <asm/ptrace.h> + +typedef struct user_regs_struct bpf_user_pt_regs_t; + +#endif /* _UAPI__ASM_BPF_PERF_EVENT_H__ */ diff --git a/arch/arc/include/uapi/asm/byteorder.h b/arch/arc/include/uapi/asm/byteorder.h new file mode 100644 index 0000000000..5540111531 --- /dev/null +++ b/arch/arc/include/uapi/asm/byteorder.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARC_BYTEORDER_H +#define __ASM_ARC_BYTEORDER_H + +#ifdef __BIG_ENDIAN__ +#include <linux/byteorder/big_endian.h> +#else +#include <linux/byteorder/little_endian.h> +#endif + +#endif /* ASM_ARC_BYTEORDER_H */ diff --git a/arch/arc/include/uapi/asm/cachectl.h b/arch/arc/include/uapi/asm/cachectl.h new file mode 100644 index 0000000000..0e4f2affc7 --- /dev/null +++ b/arch/arc/include/uapi/asm/cachectl.h @@ -0,0 +1,29 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARC_ASM_CACHECTL_H +#define __ARC_ASM_CACHECTL_H + +/* + * ARC ABI flags defined for Android's finegrained cacheflush requirements + */ +#define CF_I_INV 0x0002 +#define CF_D_FLUSH 0x0010 +#define CF_D_FLUSH_INV 0x0020 + +#define CF_DEFAULT (CF_I_INV | CF_D_FLUSH) + +/* + * Standard flags expected by cacheflush system call users + */ +#define ICACHE CF_I_INV +#define DCACHE CF_D_FLUSH +#define BCACHE (CF_I_INV | CF_D_FLUSH) + +#endif diff --git a/arch/arc/include/uapi/asm/elf.h b/arch/arc/include/uapi/asm/elf.h new file mode 100644 index 0000000000..3c1dae4e5a --- /dev/null +++ b/arch/arc/include/uapi/asm/elf.h @@ -0,0 +1,35 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _UAPI__ASM_ARC_ELF_H +#define _UAPI__ASM_ARC_ELF_H + +#include <asm/ptrace.h> /* for user_regs_struct */ + +/* Machine specific ELF Hdr flags */ +#define EF_ARC_OSABI_MSK 0x00000f00 + +#define EF_ARC_OSABI_V3 0x00000300 /* v3 (no legacy syscalls) */ +#define EF_ARC_OSABI_V4 0x00000400 /* v4 (64bit data any reg align) */ + +#if __GNUC__ < 6 +#define EF_ARC_OSABI_CURRENT EF_ARC_OSABI_V3 +#else +#define EF_ARC_OSABI_CURRENT EF_ARC_OSABI_V4 +#endif + +typedef unsigned long elf_greg_t; +typedef unsigned long elf_fpregset_t; + +#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t)) +#define ELF_ARCV2REG (sizeof(struct user_regs_arcv2) / sizeof(elf_greg_t)) + +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; + +#endif diff --git a/arch/arc/include/uapi/asm/page.h b/arch/arc/include/uapi/asm/page.h new file mode 100644 index 0000000000..2a4ad619ab --- /dev/null +++ b/arch/arc/include/uapi/asm/page.h @@ -0,0 +1,36 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _UAPI__ASM_ARC_PAGE_H +#define _UAPI__ASM_ARC_PAGE_H + +#include <linux/const.h> + +/* PAGE_SHIFT determines the page size */ +#if defined(CONFIG_ARC_PAGE_SIZE_16K) +#define PAGE_SHIFT 14 +#elif defined(CONFIG_ARC_PAGE_SIZE_4K) +#define PAGE_SHIFT 12 +#else +/* + * Default 8k + * done this way (instead of under CONFIG_ARC_PAGE_SIZE_8K) because adhoc + * user code (busybox appletlib.h) expects PAGE_SHIFT to be defined w/o + * using the correct uClibc header and in their build our autoconf.h is + * not available + */ +#define PAGE_SHIFT 13 +#endif + +#define PAGE_SIZE _BITUL(PAGE_SHIFT) /* Default 8K */ +#define PAGE_OFFSET _AC(0x80000000, UL) /* Kernel starts at 2G onwrds */ + +#define PAGE_MASK (~(PAGE_SIZE-1)) + +#endif /* _UAPI__ASM_ARC_PAGE_H */ diff --git a/arch/arc/include/uapi/asm/ptrace.h b/arch/arc/include/uapi/asm/ptrace.h new file mode 100644 index 0000000000..2a6eff57f6 --- /dev/null +++ b/arch/arc/include/uapi/asm/ptrace.h @@ -0,0 +1,58 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Amit Bhor, Sameer Dhavale: Codito Technologies 2004 + */ + +#ifndef _UAPI__ASM_ARC_PTRACE_H +#define _UAPI__ASM_ARC_PTRACE_H + +#define PTRACE_GET_THREAD_AREA 25 + +#ifndef __ASSEMBLY__ +/* + * Userspace ABI: Register state needed by + * -ptrace (gdbserver) + * -sigcontext (SA_SIGNINFO signal frame) + * + * This is to decouple pt_regs from user-space ABI, to be able to change it + * w/o affecting the ABI. + * + * The intermediate pad,pad2 are relics of initial layout based on pt_regs + * for optimizations when copying pt_regs to/from user_regs_struct. + * We no longer need them, but can't be changed as they are part of ABI now. + * + * Also, sigcontext only care about the scratch regs as that is what we really + * save/restore for signal handling. However gdb also uses the same struct + * hence callee regs need to be in there too. +*/ +struct user_regs_struct { + + unsigned long pad; + struct { + unsigned long bta, lp_start, lp_end, lp_count; + unsigned long status32, ret, blink, fp, gp; + unsigned long r12, r11, r10, r9, r8, r7, r6, r5, r4, r3, r2, r1, r0; + unsigned long sp; + } scratch; + unsigned long pad2; + struct { + unsigned long r25, r24, r23, r22, r21, r20; + unsigned long r19, r18, r17, r16, r15, r14, r13; + } callee; + unsigned long efa; /* break pt addr, for break points in delay slots */ + unsigned long stop_pc; /* give dbg stop_pc after ensuring brkpt trap */ +}; + +struct user_regs_arcv2 { + unsigned long r30, r58, r59; +}; + +#endif /* !__ASSEMBLY__ */ + +#endif /* _UAPI__ASM_ARC_PTRACE_H */ diff --git a/arch/arc/include/uapi/asm/setup.h b/arch/arc/include/uapi/asm/setup.h new file mode 100644 index 0000000000..a6d4e44938 --- /dev/null +++ b/arch/arc/include/uapi/asm/setup.h @@ -0,0 +1,6 @@ +/* + * setup.h is part of userspace header ABI so UAPI scripts have to generate it + * even if there's nothing to export - causing empty <uapi/asm/setup.h> + * However to prevent "patch" from discarding it we add this placeholder + * comment + */ diff --git a/arch/arc/include/uapi/asm/sigcontext.h b/arch/arc/include/uapi/asm/sigcontext.h new file mode 100644 index 0000000000..7a5449dfcb --- /dev/null +++ b/arch/arc/include/uapi/asm/sigcontext.h @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _ASM_ARC_SIGCONTEXT_H +#define _ASM_ARC_SIGCONTEXT_H + +#include <asm/ptrace.h> + +/* + * Signal context structure - contains all info to do with the state + * before the signal handler was invoked. + */ +struct sigcontext { + struct user_regs_struct regs; + struct user_regs_arcv2 v2abi; +}; + +#endif /* _ASM_ARC_SIGCONTEXT_H */ diff --git a/arch/arc/include/uapi/asm/signal.h b/arch/arc/include/uapi/asm/signal.h new file mode 100644 index 0000000000..ba3143a1b3 --- /dev/null +++ b/arch/arc/include/uapi/asm/signal.h @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Amit Bhor, Sameer Dhavale: Codito Technologies 2004 + */ + +#ifndef _ASM_ARC_SIGNAL_H +#define _ASM_ARC_SIGNAL_H + +/* + * This is much needed for ARC sigreturn optimization. + * This allows uClibc to piggback the addr of a sigreturn stub in sigaction, + * which allows sigreturn based re-entry into kernel after handling signal. + * W/o this kernel needs to "synthesize" the sigreturn trampoline on user + * mode stack which in turn forces the following: + * -TLB Flush (after making the stack page executable) + * -Cache line Flush (to make I/D Cache lines coherent) + */ +#define SA_RESTORER 0x04000000 + +#include <asm-generic/signal.h> + +#endif /* _ASM_ARC_SIGNAL_H */ diff --git a/arch/arc/include/uapi/asm/swab.h b/arch/arc/include/uapi/asm/swab.h new file mode 100644 index 0000000000..02109cd48e --- /dev/null +++ b/arch/arc/include/uapi/asm/swab.h @@ -0,0 +1,99 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * vineetg: May 2011 + * -Support single cycle endian-swap insn in ARC700 4.10 + * + * vineetg: June 2009 + * -Better htonl implementation (5 instead of 9 ALU instructions) + * -Hardware assisted single cycle bswap (Use Case of ARC custom instrn) + */ + +#ifndef __ASM_ARC_SWAB_H +#define __ASM_ARC_SWAB_H + +#include <linux/types.h> + +/* Native single cycle endian swap insn */ +#ifdef CONFIG_ARC_HAS_SWAPE + +#define __arch_swab32(x) \ +({ \ + unsigned int tmp = x; \ + __asm__( \ + " swape %0, %1 \n" \ + : "=r" (tmp) \ + : "r" (tmp)); \ + tmp; \ +}) + +#else + +/* Several ways of Endian-Swap Emulation for ARC + * 0: kernel generic + * 1: ARC optimised "C" + * 2: ARC Custom instruction + */ +#define ARC_BSWAP_TYPE 1 + +#if (ARC_BSWAP_TYPE == 1) /******* Software only ********/ + +/* The kernel default implementation of htonl is + * return x<<24 | x>>24 | + * (x & (__u32)0x0000ff00UL)<<8 | (x & (__u32)0x00ff0000UL)>>8; + * + * This generates 9 instructions on ARC (excluding the ld/st) + * + * 8051fd8c: ld r3,[r7,20] ; Mem op : Get the value to be swapped + * 8051fd98: asl r5,r3,24 ; get 3rd Byte + * 8051fd9c: lsr r2,r3,24 ; get 0th Byte + * 8051fda0: and r4,r3,0xff00 + * 8051fda8: asl r4,r4,8 ; get 1st Byte + * 8051fdac: and r3,r3,0x00ff0000 + * 8051fdb4: or r2,r2,r5 ; combine 0th and 3rd Bytes + * 8051fdb8: lsr r3,r3,8 ; 2nd Byte at correct place in Dst Reg + * 8051fdbc: or r2,r2,r4 ; combine 0,3 Bytes with 1st Byte + * 8051fdc0: or r2,r2,r3 ; combine 0,3,1 Bytes with 2nd Byte + * 8051fdc4: st r2,[r1,20] ; Mem op : save result back to mem + * + * Joern suggested a better "C" algorithm which is great since + * (1) It is portable to any architecure + * (2) At the same time it takes advantage of ARC ISA (rotate intrns) + */ + +#define __arch_swab32(x) \ +({ unsigned long __in = (x), __tmp; \ + __tmp = __in << 8 | __in >> 24; /* ror tmp,in,24 */ \ + __in = __in << 24 | __in >> 8; /* ror in,in,8 */ \ + __tmp ^= __in; \ + __tmp &= 0xff00ff; \ + __tmp ^ __in; \ +}) + +#elif (ARC_BSWAP_TYPE == 2) /* Custom single cycle bswap instruction */ + +#define __arch_swab32(x) \ +({ \ + unsigned int tmp = x; \ + __asm__( \ + " .extInstruction bswap, 7, 0x00, SUFFIX_NONE, SYNTAX_2OP \n"\ + " bswap %0, %1 \n"\ + : "=r" (tmp) \ + : "r" (tmp)); \ + tmp; \ +}) + +#endif /* ARC_BSWAP_TYPE=zzz */ + +#endif /* CONFIG_ARC_HAS_SWAPE */ + +#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) +#define __SWAB_64_THRU_32__ +#endif + +#endif diff --git a/arch/arc/include/uapi/asm/unistd.h b/arch/arc/include/uapi/asm/unistd.h new file mode 100644 index 0000000000..fa2713ae6b --- /dev/null +++ b/arch/arc/include/uapi/asm/unistd.h @@ -0,0 +1,52 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/******** no-legacy-syscalls-ABI *******/ + +/* + * Non-typical guard macro to enable inclusion twice in ARCH sys.c + * That is how the Generic syscall wrapper generator works + */ +#if !defined(_UAPI_ASM_ARC_UNISTD_H) || defined(__SYSCALL) +#define _UAPI_ASM_ARC_UNISTD_H + +#define __ARCH_WANT_RENAMEAT +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SET_GET_RLIMIT +#define __ARCH_WANT_SYS_EXECVE +#define __ARCH_WANT_SYS_CLONE +#define __ARCH_WANT_SYS_CLONE3 +#define __ARCH_WANT_SYS_VFORK +#define __ARCH_WANT_SYS_FORK +#define __ARCH_WANT_TIME32_SYSCALLS + +#define sys_mmap2 sys_mmap_pgoff + +#include <asm-generic/unistd.h> + +#define NR_syscalls __NR_syscalls + +/* Generic syscall (fs/filesystems.c - lost in asm-generic/unistd.h */ +#define __NR_sysfs (__NR_arch_specific_syscall + 3) + +/* ARC specific syscall */ +#define __NR_cacheflush (__NR_arch_specific_syscall + 0) +#define __NR_arc_settls (__NR_arch_specific_syscall + 1) +#define __NR_arc_gettls (__NR_arch_specific_syscall + 2) +#define __NR_arc_usr_cmpxchg (__NR_arch_specific_syscall + 4) + +__SYSCALL(__NR_cacheflush, sys_cacheflush) +__SYSCALL(__NR_arc_settls, sys_arc_settls) +__SYSCALL(__NR_arc_gettls, sys_arc_gettls) +__SYSCALL(__NR_arc_usr_cmpxchg, sys_arc_usr_cmpxchg) +__SYSCALL(__NR_sysfs, sys_sysfs) + +#undef __SYSCALL + +#endif diff --git a/arch/arc/kernel/.gitignore b/arch/arc/kernel/.gitignore new file mode 100644 index 0000000000..bbb90f92d0 --- /dev/null +++ b/arch/arc/kernel/.gitignore @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only +vmlinux.lds diff --git a/arch/arc/kernel/Makefile b/arch/arc/kernel/Makefile new file mode 100644 index 0000000000..95fbf9364c --- /dev/null +++ b/arch/arc/kernel/Makefile @@ -0,0 +1,29 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) +# + +obj-y := head.o arcksyms.o setup.o irq.o reset.o ptrace.o process.o devtree.o +obj-y += signal.o traps.o sys.o troubleshoot.o stacktrace.o disasm.o +obj-y += ctx_sw_asm.o + +obj-$(CONFIG_ISA_ARCOMPACT) += entry-compact.o intc-compact.o +obj-$(CONFIG_ISA_ARCV2) += entry-arcv2.o intc-arcv2.o + +obj-$(CONFIG_MODULES) += arcksyms.o module.o +obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_ARC_MCIP) += mcip.o +obj-$(CONFIG_ARC_DW2_UNWIND) += unwind.o +obj-$(CONFIG_KPROBES) += kprobes.o +obj-$(CONFIG_ARC_EMUL_UNALIGNED) += unaligned.o +obj-$(CONFIG_KGDB) += kgdb.o +obj-$(CONFIG_ARC_METAWARE_HLINK) += arc_hostlink.o +obj-$(CONFIG_PERF_EVENTS) += perf_event.o +obj-$(CONFIG_JUMP_LABEL) += jump_label.o + +obj-$(CONFIG_ARC_FPU_SAVE_RESTORE) += fpu.o +ifdef CONFIG_ISA_ARCOMPACT +CFLAGS_fpu.o += -mdpfp +endif + +extra-y := vmlinux.lds diff --git a/arch/arc/kernel/arc_hostlink.c b/arch/arc/kernel/arc_hostlink.c new file mode 100644 index 0000000000..08c5196efe --- /dev/null +++ b/arch/arc/kernel/arc_hostlink.c @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * arc_hostlink.c: Pseudo-driver for Metaware provided "hostlink" facility + * + * Allows Linux userland access to host in absence of any peripherals. + * + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#include <linux/fs.h> /* file_operations */ +#include <linux/miscdevice.h> +#include <linux/mm.h> /* VM_IO */ +#include <linux/module.h> +#include <linux/uaccess.h> + +static unsigned char __HOSTLINK__[4 * PAGE_SIZE] __aligned(PAGE_SIZE); + +static int arc_hl_mmap(struct file *fp, struct vm_area_struct *vma) +{ + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + + if (io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, + vma->vm_end - vma->vm_start, + vma->vm_page_prot)) { + pr_warn("Hostlink buffer mmap ERROR\n"); + return -EAGAIN; + } + return 0; +} + +static long arc_hl_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + /* we only support, returning the physical addr to mmap in user space */ + put_user((unsigned int)__HOSTLINK__, (int __user *)arg); + return 0; +} + +static const struct file_operations arc_hl_fops = { + .unlocked_ioctl = arc_hl_ioctl, + .mmap = arc_hl_mmap, +}; + +static struct miscdevice arc_hl_dev = { + .minor = MISC_DYNAMIC_MINOR, + .name = "hostlink", + .fops = &arc_hl_fops +}; + +static int __init arc_hl_init(void) +{ + pr_info("ARC Hostlink driver mmap at 0x%p\n", __HOSTLINK__); + return misc_register(&arc_hl_dev); +} +module_init(arc_hl_init); diff --git a/arch/arc/kernel/arcksyms.c b/arch/arc/kernel/arcksyms.c new file mode 100644 index 0000000000..8851c0a19e --- /dev/null +++ b/arch/arc/kernel/arcksyms.c @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * arcksyms.c - Exporting symbols not exportable from their own sources + * + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#include <linux/module.h> + +/* libgcc functions, not part of kernel sources */ +extern void __ashldi3(void); +extern void __ashrdi3(void); +extern void __divsi3(void); +extern void __divsf3(void); +extern void __lshrdi3(void); +extern void __modsi3(void); +extern void __muldi3(void); +extern void __ucmpdi2(void); +extern void __udivsi3(void); +extern void __umodsi3(void); +extern void __cmpdi2(void); +extern void __fixunsdfsi(void); +extern void __muldf3(void); +extern void __divdf3(void); +extern void __floatunsidf(void); +extern void __floatunsisf(void); +extern void __udivdi3(void); + +EXPORT_SYMBOL(__ashldi3); +EXPORT_SYMBOL(__ashrdi3); +EXPORT_SYMBOL(__divsi3); +EXPORT_SYMBOL(__divsf3); +EXPORT_SYMBOL(__lshrdi3); +EXPORT_SYMBOL(__modsi3); +EXPORT_SYMBOL(__muldi3); +EXPORT_SYMBOL(__ucmpdi2); +EXPORT_SYMBOL(__udivsi3); +EXPORT_SYMBOL(__umodsi3); +EXPORT_SYMBOL(__cmpdi2); +EXPORT_SYMBOL(__fixunsdfsi); +EXPORT_SYMBOL(__muldf3); +EXPORT_SYMBOL(__divdf3); +EXPORT_SYMBOL(__floatunsidf); +EXPORT_SYMBOL(__floatunsisf); +EXPORT_SYMBOL(__udivdi3); + +/* ARC optimised assembler routines */ +EXPORT_SYMBOL(memset); +EXPORT_SYMBOL(memcpy); +EXPORT_SYMBOL(memcmp); +EXPORT_SYMBOL(strchr); +EXPORT_SYMBOL(strcpy); +EXPORT_SYMBOL(strcmp); +EXPORT_SYMBOL(strlen); diff --git a/arch/arc/kernel/asm-offsets.c b/arch/arc/kernel/asm-offsets.c new file mode 100644 index 0000000000..f77deb7991 --- /dev/null +++ b/arch/arc/kernel/asm-offsets.c @@ -0,0 +1,84 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/interrupt.h> +#include <linux/thread_info.h> +#include <linux/kbuild.h> +#include <linux/ptrace.h> +#include <asm/hardirq.h> +#include <asm/page.h> + + +int main(void) +{ + DEFINE(TASK_THREAD, offsetof(struct task_struct, thread)); + DEFINE(TASK_THREAD_INFO, offsetof(struct task_struct, stack)); + + BLANK(); + + DEFINE(THREAD_CALLEE_REG, offsetof(struct thread_struct, callee_reg)); + DEFINE(THREAD_FAULT_ADDR, + offsetof(struct thread_struct, fault_address)); + + BLANK(); + + DEFINE(THREAD_INFO_KSP, offsetof(struct thread_info, ksp)); + DEFINE(THREAD_INFO_FLAGS, offsetof(struct thread_info, flags)); + DEFINE(THREAD_INFO_PREEMPT_COUNT, + offsetof(struct thread_info, preempt_count)); + + BLANK(); + + DEFINE(TASK_ACT_MM, offsetof(struct task_struct, active_mm)); + DEFINE(TASK_TGID, offsetof(struct task_struct, tgid)); + DEFINE(TASK_PID, offsetof(struct task_struct, pid)); + DEFINE(TASK_COMM, offsetof(struct task_struct, comm)); + + DEFINE(MM_CTXT, offsetof(struct mm_struct, context)); + DEFINE(MM_PGD, offsetof(struct mm_struct, pgd)); + + DEFINE(MM_CTXT_ASID, offsetof(mm_context_t, asid)); + + BLANK(); + + DEFINE(PT_status32, offsetof(struct pt_regs, status32)); + DEFINE(PT_event, offsetof(struct pt_regs, ecr)); + DEFINE(PT_bta, offsetof(struct pt_regs, bta)); + DEFINE(PT_sp, offsetof(struct pt_regs, sp)); + DEFINE(PT_r0, offsetof(struct pt_regs, r0)); + DEFINE(PT_r1, offsetof(struct pt_regs, r1)); + DEFINE(PT_r2, offsetof(struct pt_regs, r2)); + DEFINE(PT_r3, offsetof(struct pt_regs, r3)); + DEFINE(PT_r4, offsetof(struct pt_regs, r4)); + DEFINE(PT_r5, offsetof(struct pt_regs, r5)); + DEFINE(PT_r6, offsetof(struct pt_regs, r6)); + DEFINE(PT_r7, offsetof(struct pt_regs, r7)); + DEFINE(PT_r8, offsetof(struct pt_regs, r8)); + DEFINE(PT_r10, offsetof(struct pt_regs, r10)); + DEFINE(PT_r26, offsetof(struct pt_regs, r26)); + DEFINE(PT_ret, offsetof(struct pt_regs, ret)); + DEFINE(PT_blink, offsetof(struct pt_regs, blink)); + OFFSET(PT_fp, pt_regs, fp); + DEFINE(PT_lpe, offsetof(struct pt_regs, lp_end)); + DEFINE(PT_lpc, offsetof(struct pt_regs, lp_count)); +#ifdef CONFIG_ISA_ARCV2 + OFFSET(PT_r12, pt_regs, r12); + OFFSET(PT_r30, pt_regs, r30); +#endif +#ifdef CONFIG_ARC_HAS_ACCL_REGS + OFFSET(PT_r58, pt_regs, r58); + OFFSET(PT_r59, pt_regs, r59); +#endif +#ifdef CONFIG_ARC_DSP_SAVE_RESTORE_REGS + OFFSET(PT_DSP_CTRL, pt_regs, DSP_CTRL); +#endif + + DEFINE(SZ_CALLEE_REGS, sizeof(struct callee_regs)); + DEFINE(SZ_PT_REGS, sizeof(struct pt_regs)); + + return 0; +} diff --git a/arch/arc/kernel/ctx_sw_asm.S b/arch/arc/kernel/ctx_sw_asm.S new file mode 100644 index 0000000000..48e1f21976 --- /dev/null +++ b/arch/arc/kernel/ctx_sw_asm.S @@ -0,0 +1,64 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * Vineetg: Aug 2009 + * -Moved core context switch macro out of entry.S into this file. + * -This is the more "natural" hand written assembler + */ + +#include <linux/linkage.h> +#include <asm/entry.h> /* For the SAVE_* macros */ +#include <asm/asm-offsets.h> + +; IN +; - r0: prev task (also current) +; - r1: next task +; OUT +; - r0: prev task (so r0 not touched) + + .section .sched.text,"ax",@progbits +ENTRY_CFI(__switch_to) + + /* save kernel stack frame regs of @prev task */ + push blink + CFI_DEF_CFA_OFFSET 4 + CFI_OFFSET r31, -4 + + push fp + CFI_DEF_CFA_OFFSET 8 + CFI_OFFSET r27, -8 + + mov fp, sp + CFI_DEF_CFA_REGISTER r27 + + /* kernel mode callee regs of @prev */ + SAVE_CALLEE_SAVED_KERNEL + + /* + * save final SP to @prev->thread_info.ksp + * @prev is "current" so thread_info derived from SP + */ + GET_CURR_THR_INFO_FROM_SP r10 + st sp, [r10, THREAD_INFO_KSP] + + /* update @next in _current_task[] and GP register caching it */ + SET_CURR_TASK_ON_CPU r1, r10 + + /* load SP from @next->thread_info.ksp */ + ld r10, [r1, TASK_THREAD_INFO] + ld sp, [r10, THREAD_INFO_KSP] + + /* restore callee regs, stack frame regs of @next */ + RESTORE_CALLEE_SAVED_KERNEL + + pop fp + CFI_RESTORE r27 + CFI_DEF_CFA r28, 4 + + pop blink + CFI_RESTORE r31 + CFI_DEF_CFA_OFFSET 0 + + j [blink] +END_CFI(__switch_to) diff --git a/arch/arc/kernel/devtree.c b/arch/arc/kernel/devtree.c new file mode 100644 index 0000000000..4c9e61457b --- /dev/null +++ b/arch/arc/kernel/devtree.c @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com) + * + * Based on reduced version of METAG + */ + + +#include <linux/init.h> +#include <linux/reboot.h> +#include <linux/memblock.h> +#include <linux/of.h> +#include <linux/of_fdt.h> +#include <asm/mach_desc.h> +#include <asm/serial.h> + +#ifdef CONFIG_SERIAL_EARLYCON + +static unsigned int __initdata arc_base_baud; + +unsigned int __init arc_early_base_baud(void) +{ + return arc_base_baud/16; +} + +static void __init arc_set_early_base_baud(unsigned long dt_root) +{ + if (of_flat_dt_is_compatible(dt_root, "abilis,arc-tb10x")) + arc_base_baud = 166666666; /* Fixed 166.6MHz clk (TB10x) */ + else if (of_flat_dt_is_compatible(dt_root, "snps,arc-sdp") || + of_flat_dt_is_compatible(dt_root, "snps,hsdk")) + arc_base_baud = 33333333; /* Fixed 33MHz clk (AXS10x & HSDK) */ + else + arc_base_baud = 50000000; /* Fixed default 50MHz */ +} +#else +#define arc_set_early_base_baud(dt_root) +#endif + +static const void * __init arch_get_next_mach(const char *const **match) +{ + static const struct machine_desc *mdesc = __arch_info_begin; + const struct machine_desc *m = mdesc; + + if (m >= __arch_info_end) + return NULL; + + mdesc++; + *match = m->dt_compat; + return m; +} + +/** + * setup_machine_fdt - Machine setup when an dtb was passed to the kernel + * @dt: virtual address pointer to dt blob + * + * If a dtb was passed to the kernel, then use it to choose the correct + * machine_desc and to setup the system. + */ +const struct machine_desc * __init setup_machine_fdt(void *dt) +{ + const struct machine_desc *mdesc; + unsigned long dt_root; + + if (!early_init_dt_scan(dt)) + return NULL; + + mdesc = of_flat_dt_match_machine(NULL, arch_get_next_mach); + if (!mdesc) + machine_halt(); + + dt_root = of_get_flat_dt_root(); + arc_set_early_base_baud(dt_root); + + return mdesc; +} diff --git a/arch/arc/kernel/disasm.c b/arch/arc/kernel/disasm.c new file mode 100644 index 0000000000..ccc7e8c39e --- /dev/null +++ b/arch/arc/kernel/disasm.c @@ -0,0 +1,594 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * several functions that help interpret ARC instructions + * used for unaligned accesses, kprobes and kgdb + * + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#include <linux/types.h> +#include <linux/kprobes.h> +#include <linux/slab.h> +#include <linux/uaccess.h> +#include <asm/disasm.h> + +#if defined(CONFIG_KGDB) || defined(CONFIG_ARC_EMUL_UNALIGNED) || \ + defined(CONFIG_KPROBES) + +/* disasm_instr: Analyses instruction at addr, stores + * findings in *state + */ +void __kprobes disasm_instr(unsigned long addr, struct disasm_state *state, + int userspace, struct pt_regs *regs, struct callee_regs *cregs) +{ + int fieldA = 0; + int fieldC = 0, fieldCisReg = 0; + uint16_t word1 = 0, word0 = 0; + int subopcode, is_linked, op_format; + uint16_t *ins_ptr; + uint16_t ins_buf[4]; + int bytes_not_copied = 0; + + memset(state, 0, sizeof(struct disasm_state)); + + /* This fetches the upper part of the 32 bit instruction + * in both the cases of Little Endian or Big Endian configurations. */ + if (userspace) { + bytes_not_copied = copy_from_user(ins_buf, + (const void __user *) addr, 8); + if (bytes_not_copied > 6) + goto fault; + ins_ptr = ins_buf; + } else { + ins_ptr = (uint16_t *) addr; + } + + word1 = *((uint16_t *)addr); + + state->major_opcode = (word1 >> 11) & 0x1F; + + /* Check if the instruction is 32 bit or 16 bit instruction */ + if (state->major_opcode < 0x0B) { + if (bytes_not_copied > 4) + goto fault; + state->instr_len = 4; + word0 = *((uint16_t *)(addr+2)); + state->words[0] = (word1 << 16) | word0; + } else { + state->instr_len = 2; + state->words[0] = word1; + } + + /* Read the second word in case of limm */ + word1 = *((uint16_t *)(addr + state->instr_len)); + word0 = *((uint16_t *)(addr + state->instr_len + 2)); + state->words[1] = (word1 << 16) | word0; + + switch (state->major_opcode) { + case op_Bcc: + state->is_branch = 1; + + /* unconditional branch s25, conditional branch s21 */ + fieldA = (IS_BIT(state->words[0], 16)) ? + FIELD_s25(state->words[0]) : + FIELD_s21(state->words[0]); + + state->delay_slot = IS_BIT(state->words[0], 5); + state->target = fieldA + (addr & ~0x3); + state->flow = direct_jump; + break; + + case op_BLcc: + if (IS_BIT(state->words[0], 16)) { + /* Branch and Link*/ + /* unconditional branch s25, conditional branch s21 */ + fieldA = (IS_BIT(state->words[0], 17)) ? + (FIELD_s25(state->words[0]) & ~0x3) : + FIELD_s21(state->words[0]); + + state->flow = direct_call; + } else { + /*Branch On Compare */ + fieldA = FIELD_s9(state->words[0]) & ~0x3; + state->flow = direct_jump; + } + + state->delay_slot = IS_BIT(state->words[0], 5); + state->target = fieldA + (addr & ~0x3); + state->is_branch = 1; + break; + + case op_LD: /* LD<zz> a,[b,s9] */ + state->write = 0; + state->di = BITS(state->words[0], 11, 11); + if (state->di) + break; + state->x = BITS(state->words[0], 6, 6); + state->zz = BITS(state->words[0], 7, 8); + state->aa = BITS(state->words[0], 9, 10); + state->wb_reg = FIELD_B(state->words[0]); + if (state->wb_reg == REG_LIMM) { + state->instr_len += 4; + state->aa = 0; + state->src1 = state->words[1]; + } else { + state->src1 = get_reg(state->wb_reg, regs, cregs); + } + state->src2 = FIELD_s9(state->words[0]); + state->dest = FIELD_A(state->words[0]); + state->pref = (state->dest == REG_LIMM); + break; + + case op_ST: + state->write = 1; + state->di = BITS(state->words[0], 5, 5); + if (state->di) + break; + state->aa = BITS(state->words[0], 3, 4); + state->zz = BITS(state->words[0], 1, 2); + state->src1 = FIELD_C(state->words[0]); + if (state->src1 == REG_LIMM) { + state->instr_len += 4; + state->src1 = state->words[1]; + } else { + state->src1 = get_reg(state->src1, regs, cregs); + } + state->wb_reg = FIELD_B(state->words[0]); + if (state->wb_reg == REG_LIMM) { + state->aa = 0; + state->instr_len += 4; + state->src2 = state->words[1]; + } else { + state->src2 = get_reg(state->wb_reg, regs, cregs); + } + state->src3 = FIELD_s9(state->words[0]); + break; + + case op_MAJOR_4: + subopcode = MINOR_OPCODE(state->words[0]); + switch (subopcode) { + case 32: /* Jcc */ + case 33: /* Jcc.D */ + case 34: /* JLcc */ + case 35: /* JLcc.D */ + is_linked = 0; + + if (subopcode == 33 || subopcode == 35) + state->delay_slot = 1; + + if (subopcode == 34 || subopcode == 35) + is_linked = 1; + + fieldCisReg = 0; + op_format = BITS(state->words[0], 22, 23); + if (op_format == 0 || ((op_format == 3) && + (!IS_BIT(state->words[0], 5)))) { + fieldC = FIELD_C(state->words[0]); + + if (fieldC == REG_LIMM) { + fieldC = state->words[1]; + state->instr_len += 4; + } else { + fieldCisReg = 1; + } + } else if (op_format == 1 || ((op_format == 3) + && (IS_BIT(state->words[0], 5)))) { + fieldC = FIELD_C(state->words[0]); + } else { + /* op_format == 2 */ + fieldC = FIELD_s12(state->words[0]); + } + + if (!fieldCisReg) { + state->target = fieldC; + state->flow = is_linked ? + direct_call : direct_jump; + } else { + state->target = get_reg(fieldC, regs, cregs); + state->flow = is_linked ? + indirect_call : indirect_jump; + } + state->is_branch = 1; + break; + + case 40: /* LPcc */ + if (BITS(state->words[0], 22, 23) == 3) { + /* Conditional LPcc u7 */ + fieldC = FIELD_C(state->words[0]); + + fieldC = fieldC << 1; + fieldC += (addr & ~0x03); + state->is_branch = 1; + state->flow = direct_jump; + state->target = fieldC; + } + /* For Unconditional lp, next pc is the fall through + * which is updated */ + break; + + case 48 ... 55: /* LD a,[b,c] */ + state->di = BITS(state->words[0], 15, 15); + if (state->di) + break; + state->x = BITS(state->words[0], 16, 16); + state->zz = BITS(state->words[0], 17, 18); + state->aa = BITS(state->words[0], 22, 23); + state->wb_reg = FIELD_B(state->words[0]); + if (state->wb_reg == REG_LIMM) { + state->instr_len += 4; + state->src1 = state->words[1]; + } else { + state->src1 = get_reg(state->wb_reg, regs, + cregs); + } + state->src2 = FIELD_C(state->words[0]); + if (state->src2 == REG_LIMM) { + state->instr_len += 4; + state->src2 = state->words[1]; + } else { + state->src2 = get_reg(state->src2, regs, + cregs); + } + state->dest = FIELD_A(state->words[0]); + if (state->dest == REG_LIMM) + state->pref = 1; + break; + + case 10: /* MOV */ + /* still need to check for limm to extract instr len */ + /* MOV is special case because it only takes 2 args */ + switch (BITS(state->words[0], 22, 23)) { + case 0: /* OP a,b,c */ + if (FIELD_C(state->words[0]) == REG_LIMM) + state->instr_len += 4; + break; + case 1: /* OP a,b,u6 */ + break; + case 2: /* OP b,b,s12 */ + break; + case 3: /* OP.cc b,b,c/u6 */ + if ((!IS_BIT(state->words[0], 5)) && + (FIELD_C(state->words[0]) == REG_LIMM)) + state->instr_len += 4; + break; + } + break; + + + default: + /* Not a Load, Jump or Loop instruction */ + /* still need to check for limm to extract instr len */ + switch (BITS(state->words[0], 22, 23)) { + case 0: /* OP a,b,c */ + if ((FIELD_B(state->words[0]) == REG_LIMM) || + (FIELD_C(state->words[0]) == REG_LIMM)) + state->instr_len += 4; + break; + case 1: /* OP a,b,u6 */ + break; + case 2: /* OP b,b,s12 */ + break; + case 3: /* OP.cc b,b,c/u6 */ + if ((!IS_BIT(state->words[0], 5)) && + ((FIELD_B(state->words[0]) == REG_LIMM) || + (FIELD_C(state->words[0]) == REG_LIMM))) + state->instr_len += 4; + break; + } + break; + } + break; + + /* 16 Bit Instructions */ + case op_LD_ADD: /* LD_S|LDB_S|LDW_S a,[b,c] */ + state->zz = BITS(state->words[0], 3, 4); + state->src1 = get_reg(FIELD_S_B(state->words[0]), regs, cregs); + state->src2 = get_reg(FIELD_S_C(state->words[0]), regs, cregs); + state->dest = FIELD_S_A(state->words[0]); + break; + + case op_ADD_MOV_CMP: + /* check for limm, ignore mov_s h,b (== mov_s 0,b) */ + if ((BITS(state->words[0], 3, 4) < 3) && + (FIELD_S_H(state->words[0]) == REG_LIMM)) + state->instr_len += 4; + break; + + case op_S: + subopcode = BITS(state->words[0], 5, 7); + switch (subopcode) { + case 0: /* j_s */ + case 1: /* j_s.d */ + case 2: /* jl_s */ + case 3: /* jl_s.d */ + state->target = get_reg(FIELD_S_B(state->words[0]), + regs, cregs); + state->delay_slot = subopcode & 1; + state->flow = (subopcode >= 2) ? + direct_call : indirect_jump; + break; + case 7: + switch (BITS(state->words[0], 8, 10)) { + case 4: /* jeq_s [blink] */ + case 5: /* jne_s [blink] */ + case 6: /* j_s [blink] */ + case 7: /* j_s.d [blink] */ + state->delay_slot = (subopcode == 7); + state->flow = indirect_jump; + state->target = get_reg(31, regs, cregs); + default: + break; + } + default: + break; + } + break; + + case op_LD_S: /* LD_S c, [b, u7] */ + state->src1 = get_reg(FIELD_S_B(state->words[0]), regs, cregs); + state->src2 = FIELD_S_u7(state->words[0]); + state->dest = FIELD_S_C(state->words[0]); + break; + + case op_LDB_S: + case op_STB_S: + /* no further handling required as byte accesses should not + * cause an unaligned access exception */ + state->zz = 1; + break; + + case op_LDWX_S: /* LDWX_S c, [b, u6] */ + state->x = 1; + fallthrough; + + case op_LDW_S: /* LDW_S c, [b, u6] */ + state->zz = 2; + state->src1 = get_reg(FIELD_S_B(state->words[0]), regs, cregs); + state->src2 = FIELD_S_u6(state->words[0]); + state->dest = FIELD_S_C(state->words[0]); + break; + + case op_ST_S: /* ST_S c, [b, u7] */ + state->write = 1; + state->src1 = get_reg(FIELD_S_C(state->words[0]), regs, cregs); + state->src2 = get_reg(FIELD_S_B(state->words[0]), regs, cregs); + state->src3 = FIELD_S_u7(state->words[0]); + break; + + case op_STW_S: /* STW_S c,[b,u6] */ + state->write = 1; + state->zz = 2; + state->src1 = get_reg(FIELD_S_C(state->words[0]), regs, cregs); + state->src2 = get_reg(FIELD_S_B(state->words[0]), regs, cregs); + state->src3 = FIELD_S_u6(state->words[0]); + break; + + case op_SP: /* LD_S|LDB_S b,[sp,u7], ST_S|STB_S b,[sp,u7] */ + /* note: we are ignoring possibility of: + * ADD_S, SUB_S, PUSH_S, POP_S as these should not + * cause unaligned exception anyway */ + state->write = BITS(state->words[0], 6, 6); + state->zz = BITS(state->words[0], 5, 5); + if (state->zz) + break; /* byte accesses should not come here */ + if (!state->write) { + state->src1 = get_reg(28, regs, cregs); + state->src2 = FIELD_S_u7(state->words[0]); + state->dest = FIELD_S_B(state->words[0]); + } else { + state->src1 = get_reg(FIELD_S_B(state->words[0]), regs, + cregs); + state->src2 = get_reg(28, regs, cregs); + state->src3 = FIELD_S_u7(state->words[0]); + } + break; + + case op_GP: /* LD_S|LDB_S|LDW_S r0,[gp,s11/s9/s10] */ + /* note: ADD_S r0, gp, s11 is ignored */ + state->zz = BITS(state->words[0], 9, 10); + state->src1 = get_reg(26, regs, cregs); + state->src2 = state->zz ? FIELD_S_s10(state->words[0]) : + FIELD_S_s11(state->words[0]); + state->dest = 0; + break; + + case op_Pcl: /* LD_S b,[pcl,u10] */ + state->src1 = regs->ret & ~3; + state->src2 = FIELD_S_u10(state->words[0]); + state->dest = FIELD_S_B(state->words[0]); + break; + + case op_BR_S: + state->target = FIELD_S_s8(state->words[0]) + (addr & ~0x03); + state->flow = direct_jump; + state->is_branch = 1; + break; + + case op_B_S: + fieldA = (BITS(state->words[0], 9, 10) == 3) ? + FIELD_S_s7(state->words[0]) : + FIELD_S_s10(state->words[0]); + state->target = fieldA + (addr & ~0x03); + state->flow = direct_jump; + state->is_branch = 1; + break; + + case op_BL_S: + state->target = FIELD_S_s13(state->words[0]) + (addr & ~0x03); + state->flow = direct_call; + state->is_branch = 1; + break; + + default: + break; + } + + if (bytes_not_copied <= (8 - state->instr_len)) + return; + +fault: state->fault = 1; +} + +long __kprobes get_reg(int reg, struct pt_regs *regs, + struct callee_regs *cregs) +{ + long *p; + +#if defined(CONFIG_ISA_ARCOMPACT) + if (reg <= 12) { + p = ®s->r0; + return p[-reg]; + } +#else /* CONFIG_ISA_ARCV2 */ + if (reg <= 11) { + p = ®s->r0; + return p[reg]; + } + + if (reg == 12) + return regs->r12; + if (reg == 30) + return regs->r30; +#ifdef CONFIG_ARC_HAS_ACCL_REGS + if (reg == 58) + return regs->r58; + if (reg == 59) + return regs->r59; +#endif +#endif + if (cregs && (reg <= 25)) { + p = &cregs->r13; + return p[13 - reg]; + } + + if (reg == 26) + return regs->r26; + if (reg == 27) + return regs->fp; + if (reg == 28) + return regs->sp; + if (reg == 31) + return regs->blink; + + return 0; +} + +void __kprobes set_reg(int reg, long val, struct pt_regs *regs, + struct callee_regs *cregs) +{ + long *p; + +#if defined(CONFIG_ISA_ARCOMPACT) + switch (reg) { + case 0 ... 12: + p = ®s->r0; + p[-reg] = val; + break; + case 13 ... 25: + if (cregs) { + p = &cregs->r13; + p[13 - reg] = val; + } + break; + case 26: + regs->r26 = val; + break; + case 27: + regs->fp = val; + break; + case 28: + regs->sp = val; + break; + case 31: + regs->blink = val; + break; + default: + break; + } +#else /* CONFIG_ISA_ARCV2 */ + switch (reg) { + case 0 ... 11: + p = ®s->r0; + p[reg] = val; + break; + case 12: + regs->r12 = val; + break; + case 13 ... 25: + if (cregs) { + p = &cregs->r13; + p[13 - reg] = val; + } + break; + case 26: + regs->r26 = val; + break; + case 27: + regs->fp = val; + break; + case 28: + regs->sp = val; + break; + case 30: + regs->r30 = val; + break; + case 31: + regs->blink = val; + break; +#ifdef CONFIG_ARC_HAS_ACCL_REGS + case 58: + regs->r58 = val; + break; + case 59: + regs->r59 = val; + break; +#endif + default: + break; + } +#endif +} + +/* + * Disassembles the insn at @pc and sets @next_pc to next PC (which could be + * @pc +2/4/6 (ARCompact ISA allows free intermixing of 16/32 bit insns). + * + * If @pc is a branch + * -@tgt_if_br is set to branch target. + * -If branch has delay slot, @next_pc updated with actual next PC. + */ +int __kprobes disasm_next_pc(unsigned long pc, struct pt_regs *regs, + struct callee_regs *cregs, + unsigned long *next_pc, unsigned long *tgt_if_br) +{ + struct disasm_state instr; + + disasm_instr(pc, &instr, 0, regs, cregs); + + *next_pc = pc + instr.instr_len; + + /* Instruction with possible two targets branch, jump and loop */ + if (instr.is_branch) + *tgt_if_br = instr.target; + + /* For the instructions with delay slots, the fall through is the + * instruction following the instruction in delay slot. + */ + if (instr.delay_slot) { + struct disasm_state instr_d; + + disasm_instr(*next_pc, &instr_d, 0, regs, cregs); + + *next_pc += instr_d.instr_len; + } + + /* Zero Overhead Loop - end of the loop */ + if (!(regs->status32 & STATUS32_L) && (*next_pc == regs->lp_end) + && (regs->lp_count > 1)) { + *next_pc = regs->lp_start; + } + + return instr.is_branch; +} + +#endif /* CONFIG_KGDB || CONFIG_ARC_EMUL_UNALIGNED || CONFIG_KPROBES */ diff --git a/arch/arc/kernel/entry-arcv2.S b/arch/arc/kernel/entry-arcv2.S new file mode 100644 index 0000000000..2e49c81c80 --- /dev/null +++ b/arch/arc/kernel/entry-arcv2.S @@ -0,0 +1,249 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * ARCv2 ISA based core Low Level Intr/Traps/Exceptions(non-TLB) Handling + * + * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com) + */ + +#include <linux/linkage.h> /* ARC_{EXTRY,EXIT} */ +#include <asm/entry.h> /* SAVE_ALL_{INT1,INT2,TRAP...} */ +#include <asm/errno.h> +#include <asm/arcregs.h> +#include <asm/irqflags.h> +#include <asm/mmu.h> + +; A maximum number of supported interrupts in the core interrupt controller. +; This number is not equal to the maximum interrupt number (256) because +; first 16 lines are reserved for exceptions and are not configurable. +#define NR_CPU_IRQS 240 + + .cpu HS + +#define VECTOR .word + +;############################ Vector Table ################################# + + .section .vector,"a",@progbits + .align 4 + +# Initial 16 slots are Exception Vectors +VECTOR res_service ; Reset Vector +VECTOR mem_service ; Mem exception +VECTOR instr_service ; Instrn Error +VECTOR EV_MachineCheck ; Fatal Machine check +VECTOR EV_TLBMissI ; Intruction TLB miss +VECTOR EV_TLBMissD ; Data TLB miss +VECTOR EV_TLBProtV ; Protection Violation +VECTOR EV_PrivilegeV ; Privilege Violation +VECTOR EV_SWI ; Software Breakpoint +VECTOR EV_Trap ; Trap exception +VECTOR EV_Extension ; Extn Instruction Exception +VECTOR EV_DivZero ; Divide by Zero +VECTOR EV_DCError ; Data Cache Error +VECTOR EV_Misaligned ; Misaligned Data Access +VECTOR reserved ; Reserved slots +VECTOR reserved ; Reserved slots + +# Begin Interrupt Vectors +VECTOR handle_interrupt ; (16) Timer0 +VECTOR handle_interrupt ; unused (Timer1) +VECTOR handle_interrupt ; unused (WDT) +VECTOR handle_interrupt ; (19) Inter core Interrupt (IPI) +VECTOR handle_interrupt ; (20) perf Interrupt +VECTOR handle_interrupt ; (21) Software Triggered Intr (Self IPI) +VECTOR handle_interrupt ; unused +VECTOR handle_interrupt ; (23) unused +# End of fixed IRQs + +.rept NR_CPU_IRQS - 8 + VECTOR handle_interrupt +.endr + + .section .text, "ax",@progbits + +reserved: + flag 1 ; Unexpected event, halt + +;##################### Interrupt Handling ############################## + +ENTRY(handle_interrupt) + + INTERRUPT_PROLOGUE + + # irq control APIs local_irq_save/restore/disable/enable fiddle with + # global interrupt enable bits in STATUS32 (.IE for 1 prio, .E[] for 2 prio) + # However a taken interrupt doesn't clear these bits. Thus irqs_disabled() + # query in hard ISR path would return false (since .IE is set) which would + # trips genirq interrupt handling asserts. + # + # So do a "soft" disable of interrutps here. + # + # Note this disable is only for consistent book-keeping as further interrupts + # will be disabled anyways even w/o this. Hardware tracks active interrupts + # seperately in AUX_IRQ_ACT.active and will not take new interrupts + # unless this one returns (or higher prio becomes pending in 2-prio scheme) + + IRQ_DISABLE + + ; icause is banked: one per priority level + ; so a higher prio interrupt taken here won't clobber prev prio icause + lr r0, [ICAUSE] + mov blink, ret_from_exception + + b.d arch_do_IRQ + mov r1, sp + +END(handle_interrupt) + +;################### Non TLB Exception Handling ############################# + +ENTRY(EV_SWI) + ; TODO: implement this + EXCEPTION_PROLOGUE + b ret_from_exception +END(EV_SWI) + +ENTRY(EV_DivZero) + ; TODO: implement this + EXCEPTION_PROLOGUE + b ret_from_exception +END(EV_DivZero) + +ENTRY(EV_DCError) + ; TODO: implement this + EXCEPTION_PROLOGUE + b ret_from_exception +END(EV_DCError) + +; --------------------------------------------- +; Memory Error Exception Handler +; - Unlike ARCompact, handles Bus errors for both User/Kernel mode, +; Instruction fetch or Data access, under a single Exception Vector +; --------------------------------------------- + +ENTRY(mem_service) + + EXCEPTION_PROLOGUE + + bl do_memory_error + b ret_from_exception +END(mem_service) + +ENTRY(EV_Misaligned) + + EXCEPTION_PROLOGUE + + SAVE_CALLEE_SAVED_USER + mov r2, sp ; callee_regs + + bl do_misaligned_access + + ; TBD: optimize - do this only if a callee reg was involved + ; either a dst of emulated LD/ST or src with address-writeback + RESTORE_CALLEE_SAVED_USER + + b ret_from_exception +END(EV_Misaligned) + +; --------------------------------------------- +; Protection Violation Exception Handler +; --------------------------------------------- + +ENTRY(EV_TLBProtV) + + EXCEPTION_PROLOGUE + + mov blink, ret_from_exception + b do_page_fault + +END(EV_TLBProtV) + +; From Linux standpoint Slow Path I/D TLB Miss is same a ProtV as they +; need to call do_page_fault(). +; ECR in pt_regs provides whether access was R/W/X + +.global call_do_page_fault +.set call_do_page_fault, EV_TLBProtV + +;############# Common Handlers for ARCompact and ARCv2 ############## + +#include "entry.S" + +;############# Return from Intr/Excp/Trap (ARCv2 ISA Specifics) ############## +; +; Restore the saved sys context (common exit-path for EXCPN/IRQ/Trap) +; IRQ shd definitely not happen between now and rtie +; All 2 entry points to here already disable interrupts + +.Lrestore_regs: +restore_regs: + + # Interrpts are actually disabled from this point on, but will get + # reenabled after we return from interrupt/exception. + # But irq tracer needs to be told now... + TRACE_ASM_IRQ_ENABLE + + ld r0, [sp, PT_status32] ; U/K mode at time of entry + lr r10, [AUX_IRQ_ACT] + + bmsk r11, r10, 15 ; extract AUX_IRQ_ACT.active + breq r11, 0, .Lexcept_ret ; No intr active, ret from Exception + +;####### Return from Intr ####### + +.Lisr_ret: + +debug_marker_l1: + ; bbit1.nt r0, STATUS_DE_BIT, .Lintr_ret_to_delay_slot + btst r0, STATUS_DE_BIT ; Z flag set if bit clear + bnz .Lintr_ret_to_delay_slot ; branch if STATUS_DE_BIT set + + ; Handle special case #1: (Entry via Exception, Return via IRQ) + ; + ; Exception in U mode, preempted in kernel, Intr taken (K mode), orig + ; task now returning to U mode (riding the Intr) + ; AUX_IRQ_ACTIVE won't have U bit set (since intr in K mode), hence SP + ; won't be switched to correct U mode value (from AUX_SP) + ; So force AUX_IRQ_ACT.U for such a case + + btst r0, STATUS_U_BIT ; Z flag set if K (Z clear for U) + bset.nz r11, r11, AUX_IRQ_ACT_BIT_U ; NZ means U + sr r11, [AUX_IRQ_ACT] + + INTERRUPT_EPILOGUE + rtie + +;####### Return from Exception / pure kernel mode ####### + +.Lexcept_ret: ; Expects r0 has PT_status32 + +debug_marker_syscall: + EXCEPTION_EPILOGUE + rtie + +;####### Return from Intr to insn in delay slot ####### + +; Handle special case #2: (Entry via Exception in Delay Slot, Return via IRQ) +; +; Intr returning to a Delay Slot (DS) insn +; (since IRQ NOT allowed in DS in ARCv2, this can only happen if orig +; entry was via Exception in DS which got preempted in kernel). +; +; IRQ RTIE won't reliably restore DE bit and/or BTA, needs workaround +; +; Solution is to drop out of interrupt context into pure kernel mode +; and return from pure kernel mode which does right things for delay slot + +.Lintr_ret_to_delay_slot: +debug_marker_ds: + + ld r2, [@intr_to_DE_cnt] + add r2, r2, 1 + st r2, [@intr_to_DE_cnt] + + ; drop out of interrupt context (clear AUX_IRQ_ACT.active) + bmskn r11, r10, 15 + sr r11, [AUX_IRQ_ACT] + b .Lexcept_ret + +END(ret_from_exception) diff --git a/arch/arc/kernel/entry-compact.S b/arch/arc/kernel/entry-compact.S new file mode 100644 index 0000000000..774c03cc1d --- /dev/null +++ b/arch/arc/kernel/entry-compact.S @@ -0,0 +1,388 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Low Level Interrupts/Traps/Exceptions(non-TLB) Handling for ARCompact ISA + * + * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * vineetg: May 2011 + * -Userspace unaligned access emulation + * + * vineetg: Feb 2011 (ptrace low level code fixes) + * -traced syscall return code (r0) was not saved into pt_regs for restoring + * into user reg-file when traded task rets to user space. + * -syscalls needing arch-wrappers (mainly for passing sp as pt_regs) + * were not invoking post-syscall trace hook (jumping directly into + * ret_from_system_call) + * + * vineetg: Nov 2010: + * -Vector table jumps (@8 bytes) converted into branches (@4 bytes) + * -To maintain the slot size of 8 bytes/vector, added nop, which is + * not executed at runtime. + * + * vineetg: Nov 2009 (Everything needed for TIF_RESTORE_SIGMASK) + * -do_signal()invoked upon TIF_RESTORE_SIGMASK as well + * -Wrappers for sys_{,rt_}sigsuspend() no longer needed as they don't + * need ptregs anymore + * + * Vineetg: Oct 2009 + * -In a rare scenario, Process gets a Priv-V exception and gets scheduled + * out. Since we don't do FAKE RTIE for Priv-V, CPU exception state remains + * active (AE bit enabled). This causes a double fault for a subseq valid + * exception. Thus FAKE RTIE needed in low level Priv-Violation handler. + * Instr Error could also cause similar scenario, so same there as well. + * + * Vineetg: March 2009 (Supporting 2 levels of Interrupts) + * + * Vineetg: Aug 28th 2008: Bug #94984 + * -Zero Overhead Loop Context shd be cleared when entering IRQ/EXcp/Trap + * Normally CPU does this automatically, however when doing FAKE rtie, + * we need to explicitly do this. The problem in macros + * FAKE_RET_FROM_EXCPN and FAKE_RET_FROM_EXCPN_LOCK_IRQ was that this bit + * was being "CLEARED" rather then "SET". Since it is Loop INHIBIT Bit, + * setting it and not clearing it clears ZOL context + * + * Vineetg: May 16th, 2008 + * - r25 now contains the Current Task when in kernel + * + * Vineetg: Dec 22, 2007 + * Minor Surgery of Low Level ISR to make it SMP safe + * - MMU_SCRATCH0 Reg used for freeing up r9 in Level 1 ISR + * - _current_task is made an array of NR_CPUS + * - Access of _current_task wrapped inside a macro so that if hardware + * team agrees for a dedicated reg, no other code is touched + * + * Amit Bhor, Rahul Trivedi, Kanika Nema, Sameer Dhavale : Codito Tech 2004 + */ + +#include <linux/errno.h> +#include <linux/linkage.h> /* {ENTRY,EXIT} */ +#include <asm/entry.h> +#include <asm/irqflags.h> + + .cpu A7 + +;############################ Vector Table ################################# + +.macro VECTOR lbl +#if 1 /* Just in case, build breaks */ + j \lbl +#else + b \lbl + nop +#endif +.endm + + .section .vector, "ax",@progbits + .align 4 + +/* Each entry in the vector table must occupy 2 words. Since it is a jump + * across sections (.vector to .text) we are guaranteed that 'j somewhere' + * will use the 'j limm' form of the instruction as long as somewhere is in + * a section other than .vector. + */ + +; ********* Critical System Events ********************** +VECTOR res_service ; 0x0, Reset Vector (0x0) +VECTOR mem_service ; 0x8, Mem exception (0x1) +VECTOR instr_service ; 0x10, Instrn Error (0x2) + +; ******************** Device ISRs ********************** +#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS +VECTOR handle_interrupt_level2 +#else +VECTOR handle_interrupt_level1 +#endif + +.rept 28 +VECTOR handle_interrupt_level1 ; Other devices +.endr + +/* FOR ARC600: timer = 0x3, uart = 0x8, emac = 0x10 */ + +; ******************** Exceptions ********************** +VECTOR EV_MachineCheck ; 0x100, Fatal Machine check (0x20) +VECTOR EV_TLBMissI ; 0x108, Instruction TLB miss (0x21) +VECTOR EV_TLBMissD ; 0x110, Data TLB miss (0x22) +VECTOR EV_TLBProtV ; 0x118, Protection Violation (0x23) + ; or Misaligned Access +VECTOR EV_PrivilegeV ; 0x120, Privilege Violation (0x24) +VECTOR EV_Trap ; 0x128, Trap exception (0x25) +VECTOR EV_Extension ; 0x130, Extn Instruction Excp (0x26) + +.rept 24 +VECTOR reserved ; Reserved Exceptions +.endr + + +;##################### Scratch Mem for IRQ stack switching ############# + +ARCFP_DATA int1_saved_reg + .align 32 + .type int1_saved_reg, @object + .size int1_saved_reg, 4 +int1_saved_reg: + .zero 4 + +/* Each Interrupt level needs its own scratch */ +ARCFP_DATA int2_saved_reg + .type int2_saved_reg, @object + .size int2_saved_reg, 4 +int2_saved_reg: + .zero 4 + +; --------------------------------------------- + .section .text, "ax",@progbits + + +reserved: + flag 1 ; Unexpected event, halt + +;##################### Interrupt Handling ############################## + +#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS +; --------------------------------------------- +; Level 2 ISR: Can interrupt a Level 1 ISR +; --------------------------------------------- +ENTRY(handle_interrupt_level2) + + INTERRUPT_PROLOGUE 2 + + ;------------------------------------------------------ + ; if L2 IRQ interrupted a L1 ISR, disable preemption + ; + ; This is to avoid a potential L1-L2-L1 scenario + ; -L1 IRQ taken + ; -L2 interrupts L1 (before L1 ISR could run) + ; -preemption off IRQ, user task in syscall picked to run + ; -RTIE to userspace + ; Returns from L2 context fine + ; But both L1 and L2 re-enabled, so another L1 can be taken + ; while prev L1 is still unserviced + ; + ;------------------------------------------------------ + + ; L2 interrupting L1 implies both L2 and L1 active + ; However both A2 and A1 are NOT set in STATUS32, thus + ; need to check STATUS32_L2 to determine if L1 was active + + ld r9, [sp, PT_status32] ; get statu32_l2 (saved in pt_regs) + bbit0 r9, STATUS_A1_BIT, 1f ; L1 not active when L2 IRQ, so normal + + ; bump thread_info->preempt_count (Disable preemption) + GET_CURR_THR_INFO_FROM_SP r10 + ld r9, [r10, THREAD_INFO_PREEMPT_COUNT] + add r9, r9, 1 + st r9, [r10, THREAD_INFO_PREEMPT_COUNT] + +1: + ;------------------------------------------------------ + ; setup params for Linux common ISR and invoke it + ;------------------------------------------------------ + lr r0, [icause2] + and r0, r0, 0x1f + + bl.d @arch_do_IRQ + mov r1, sp + + mov r8,0x2 + sr r8, [AUX_IRQ_LV12] ; clear bit in Sticky Status Reg + + b ret_from_exception + +END(handle_interrupt_level2) + +#endif + +; --------------------------------------------- +; User Mode Memory Bus Error Interrupt Handler +; (Kernel mode memory errors handled via separate exception vectors) +; --------------------------------------------- +ENTRY(mem_service) + + INTERRUPT_PROLOGUE 2 + + mov r0, ilink2 + mov r1, sp + + ; User process needs to be killed with SIGBUS, but first need to get + ; out of the L2 interrupt context (drop to pure kernel mode) and jump + ; off to "C" code where SIGBUS in enqueued + lr r3, [status32] + bclr r3, r3, STATUS_A2_BIT + or r3, r3, (STATUS_E1_MASK|STATUS_E2_MASK) + sr r3, [status32_l2] + mov ilink2, 1f + rtie +1: + bl do_memory_error + b ret_from_exception +END(mem_service) + +; --------------------------------------------- +; Level 1 ISR +; --------------------------------------------- +ENTRY(handle_interrupt_level1) + + INTERRUPT_PROLOGUE 1 + + lr r0, [icause1] + and r0, r0, 0x1f + +#ifdef CONFIG_TRACE_IRQFLAGS + ; icause1 needs to be read early, before calling tracing, which + ; can clobber scratch regs, hence use of stack to stash it + push r0 + TRACE_ASM_IRQ_DISABLE + pop r0 +#endif + + bl.d @arch_do_IRQ + mov r1, sp + + mov r8,0x1 + sr r8, [AUX_IRQ_LV12] ; clear bit in Sticky Status Reg + + b ret_from_exception +END(handle_interrupt_level1) + +;################### Non TLB Exception Handling ############################# + +; --------------------------------------------- +; Protection Violation Exception Handler +; --------------------------------------------- + +ENTRY(EV_TLBProtV) + + EXCEPTION_PROLOGUE ; ECR returned in r10 + + ;------ (5) Type of Protection Violation? ---------- + ; + ; ProtV Hardware Exception is triggered for Access Faults of 2 types + ; -Access Violation : 00_23_(00|01|02|03)_00 + ; x r w r+w + ; -Unaligned Access : 00_23_04_00 + bbit1 r10, ECR_C_BIT_PROTV_MISALIG_DATA, 4f + + ;========= (6a) Access Violation Processing ======== + bl do_page_fault + b ret_from_exception + + ;========== (6b) Non aligned access ============ +4: + + SAVE_CALLEE_SAVED_USER + mov r2, sp ; callee_regs + + bl do_misaligned_access + + ; TBD: optimize - do this only if a callee reg was involved + ; either a dst of emulated LD/ST or src with address-writeback + RESTORE_CALLEE_SAVED_USER + + b ret_from_exception + +END(EV_TLBProtV) + +; Wrapper for Linux page fault handler called from EV_TLBMiss* +; Very similar to ProtV handler case (6a) above, but avoids the extra checks +; for Misaligned access +; +ENTRY(call_do_page_fault) + + EXCEPTION_PROLOGUE + + mov blink, ret_from_exception + b do_page_fault + +END(call_do_page_fault) + +;############# Common Handlers for ARCompact and ARCv2 ############## + +#include "entry.S" + +;############# Return from Intr/Excp/Trap (ARC Specifics) ############## +; +; Restore the saved sys context (common exit-path for EXCPN/IRQ/Trap) +; IRQ shd definitely not happen between now and rtie +; All 2 entry points to here already disable interrupts + +.Lrestore_regs: + + # Interrupts are actually disabled from this point on, but will get + # reenabled after we return from interrupt/exception. + # But irq tracer needs to be told now... + TRACE_ASM_IRQ_ENABLE + + lr r10, [status32] + + ; Restore REG File. In case multiple Events outstanding, + ; use the same priority as rtie: EXCPN, L2 IRQ, L1 IRQ, None + ; Note that we use realtime STATUS32 (not pt_regs->status32) to + ; decide that. + + and.f 0, r10, (STATUS_A1_MASK|STATUS_A2_MASK) + bz .Lexcep_or_pure_K_ret + + ; Returning from Interrupts (Level 1 or 2) + +#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS + + ; Level 2 interrupt return Path - from hardware standpoint + bbit0 r10, STATUS_A2_BIT, not_level2_interrupt + + ;------------------------------------------------------------------ + ; However the context returning might not have taken L2 intr itself + ; e.g. Task'A' user-code -> L2 intr -> schedule -> 'B' user-code ret + ; Special considerations needed for the context which took L2 intr + + ld r9, [sp, PT_event] ; Ensure this is L2 intr context + brne r9, event_IRQ2, 149f + + ;------------------------------------------------------------------ + ; if L2 IRQ interrupted an L1 ISR, we'd disabled preemption earlier + ; so that sched doesn't move to new task, causing L1 to be delayed + ; undeterministically. Now that we've achieved that, let's reset + ; things to what they were, before returning from L2 context + ;---------------------------------------------------------------- + + ld r9, [sp, PT_status32] ; get statu32_l2 (saved in pt_regs) + bbit0 r9, STATUS_A1_BIT, 149f ; L1 not active when L2 IRQ, so normal + + ; decrement thread_info->preempt_count (re-enable preemption) + GET_CURR_THR_INFO_FROM_SP r10 + ld r9, [r10, THREAD_INFO_PREEMPT_COUNT] + + ; paranoid check, given A1 was active when A2 happened, preempt count + ; must not be 0 because we would have incremented it. + ; If this does happen we simply HALT as it means a BUG !!! + cmp r9, 0 + bnz 2f + flag 1 + +2: + sub r9, r9, 1 + st r9, [r10, THREAD_INFO_PREEMPT_COUNT] + +149: + INTERRUPT_EPILOGUE 2 ; return from level 2 interrupt +debug_marker_l2: + rtie + +not_level2_interrupt: + +#endif + + INTERRUPT_EPILOGUE 1 ; return from level 1 interrupt +debug_marker_l1: + rtie + +.Lexcep_or_pure_K_ret: + + ;this case is for syscalls or Exceptions or pure kernel mode + + EXCEPTION_EPILOGUE +debug_marker_syscall: + rtie + +END(ret_from_exception) diff --git a/arch/arc/kernel/entry.S b/arch/arc/kernel/entry.S new file mode 100644 index 0000000000..089f668051 --- /dev/null +++ b/arch/arc/kernel/entry.S @@ -0,0 +1,347 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Common Low Level Interrupts/Traps/Exceptions(non-TLB) Handling for ARC + * (included from entry-<isa>.S + * + * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +/*------------------------------------------------------------------ + * Function ABI + *------------------------------------------------------------------ + * + * Arguments r0 - r7 + * Caller Saved Registers r0 - r12 + * Callee Saved Registers r13- r25 + * Global Pointer (gp) r26 + * Frame Pointer (fp) r27 + * Stack Pointer (sp) r28 + * Branch link register (blink) r31 + *------------------------------------------------------------------ + */ + +;################### Special Sys Call Wrappers ########################## + +ENTRY(sys_clone_wrapper) + SAVE_CALLEE_SAVED_USER + bl @sys_clone + DISCARD_CALLEE_SAVED_USER + + GET_CURR_THR_INFO_FLAGS r10 + and.f 0, r10, _TIF_SYSCALL_WORK + bnz tracesys_exit + + b .Lret_from_system_call +END(sys_clone_wrapper) + +ENTRY(sys_clone3_wrapper) + SAVE_CALLEE_SAVED_USER + bl @sys_clone3 + DISCARD_CALLEE_SAVED_USER + + GET_CURR_THR_INFO_FLAGS r10 + and.f 0, r10, _TIF_SYSCALL_WORK + bnz tracesys_exit + + b .Lret_from_system_call +END(sys_clone3_wrapper) + +ENTRY(ret_from_fork) + ; when the forked child comes here from the __switch_to function + ; r0 has the last task pointer. + ; put last task in scheduler queue + jl @schedule_tail + + ld r9, [sp, PT_status32] + brne r9, 0, 1f + + jl.d [r14] ; kernel thread entry point + mov r0, r13 ; (see PF_KTHREAD block in copy_thread) + +1: + ; Return to user space + ; 1. Any forked task (Reach here via BRne above) + ; 2. First ever init task (Reach here via return from JL above) + ; This is the historic "kernel_execve" use-case, to return to init + ; user mode, in a round about way since that is always done from + ; a kernel thread which is executed via JL above but always returns + ; out whenever kernel_execve (now inline do_fork()) is involved + b ret_from_exception +END(ret_from_fork) + +;################### Non TLB Exception Handling ############################# + +; --------------------------------------------- +; Instruction Error Exception Handler +; --------------------------------------------- + +ENTRY(instr_service) + + EXCEPTION_PROLOGUE + + bl do_insterror_or_kprobe + b ret_from_exception +END(instr_service) + +; --------------------------------------------- +; Machine Check Exception Handler +; --------------------------------------------- + +ENTRY(EV_MachineCheck) + + EXCEPTION_PROLOGUE_KEEP_AE ; ECR returned in r10 + + lr r0, [efa] + mov r1, sp + + ; MC excpetions disable MMU + ARC_MMU_REENABLE r3 + + lsr r3, r10, 8 + bmsk r3, r3, 7 + brne r3, ECR_C_MCHK_DUP_TLB, 1f + + bl do_tlb_overlap_fault + b ret_from_exception + +1: + ; DEAD END: can't do much, display Regs and HALT + SAVE_CALLEE_SAVED_USER + + GET_CURR_TASK_FIELD_PTR TASK_THREAD, r10 + st sp, [r10, THREAD_CALLEE_REG] + + j do_machine_check_fault + +END(EV_MachineCheck) + +; --------------------------------------------- +; Privilege Violation Exception Handler +; --------------------------------------------- +ENTRY(EV_PrivilegeV) + + EXCEPTION_PROLOGUE + + bl do_privilege_fault + b ret_from_exception +END(EV_PrivilegeV) + +; --------------------------------------------- +; Extension Instruction Exception Handler +; --------------------------------------------- +ENTRY(EV_Extension) + + EXCEPTION_PROLOGUE + + bl do_extension_fault + b ret_from_exception +END(EV_Extension) + +;################ Trap Handling (Syscall, Breakpoint) ################## + +; --------------------------------------------- +; syscall Tracing +; --------------------------------------------- +tracesys: + ; safekeep EFA (r12) if syscall tracer wanted PC + ; for traps, ERET is pre-commit so points to next-PC + GET_CURR_TASK_FIELD_PTR TASK_THREAD, r11 + st r12, [r11, THREAD_FAULT_ADDR] ; thread.fault_address + + ; PRE syscall trace hook + mov r0, sp ; pt_regs + bl @syscall_trace_enter + + ; Tracing code now returns the syscall num (orig or modif) + mov r8, r0 + + ; Do the Sys Call as we normally would. + cmp r8, NR_syscalls - 1 + mov.hi r0, -ENOSYS + bhi tracesys_exit + + ; Restore the sys-call args. Mere invocation of the hook abv could have + ; clobbered them (since they are in scratch regs). The tracer could also + ; have deliberately changed the syscall args: r0-r7 + ld r0, [sp, PT_r0] + ld r1, [sp, PT_r1] + ld r2, [sp, PT_r2] + ld r3, [sp, PT_r3] + ld r4, [sp, PT_r4] + ld r5, [sp, PT_r5] + ld r6, [sp, PT_r6] + ld r7, [sp, PT_r7] + ld.as r9, [sys_call_table, r8] + jl [r9] + +tracesys_exit: + st r0, [sp, PT_r0] + + ; POST syscall trace hook + mov r0, sp ; pt_regs needed + bl @syscall_trace_exit + + ; don't call ret_from_system_call as it saves r0, already done above + b ret_from_exception + +; --------------------------------------------- +; Breakpoint TRAP +; --------------------------------------------- +trap_with_param: + mov r0, r12 ; EFA in case ptracer/gdb wants stop_pc + mov r1, sp ; pt_regs + + ; save callee regs in case tracer/gdb wants to peek + SAVE_CALLEE_SAVED_USER + + ; safekeep ref to callee regs + GET_CURR_TASK_FIELD_PTR TASK_THREAD, r10 + st sp, [r10, THREAD_CALLEE_REG] + + ; call the non syscall trap handler + bl do_non_swi_trap + + ; unwind stack to discard callee regs + DISCARD_CALLEE_SAVED_USER + + b ret_from_exception + +; --------------------------------------------- +; syscall TRAP +; ABI: (r0-r7) upto 8 args, (r8) syscall number +; --------------------------------------------- + +ENTRY(EV_Trap) + + EXCEPTION_PROLOGUE_KEEP_AE + + lr r12, [efa] + + FAKE_RET_FROM_EXCPN + + ;============ TRAP N : breakpoints, kprobes etc + bmsk.f 0, r10, 7 + bnz trap_with_param + + ;============ TRAP 0 (no param): syscall + + ; syscall tracing ongoing, invoke pre-post-hooks around syscall + GET_CURR_THR_INFO_FLAGS r10 + and.f 0, r10, _TIF_SYSCALL_WORK + bnz tracesys ; this never comes back + + ;============ Normal syscall case + + cmp r8, NR_syscalls - 1 + mov.hi r0, -ENOSYS + bhi .Lret_from_system_call + + ld.as r9,[sys_call_table, r8] + jl [r9] + +.Lret_from_system_call: + st r0, [sp, PT_r0] ; sys call return value in pt_regs + + ; fall through to ret_from_exception +END(EV_Trap) + +;############# Return from Intr/Excp/Trap (Linux Specifics) ############## +; +; If ret to user mode do we need to handle signals, schedule() et al. + +ENTRY(ret_from_exception) + + ; Pre-{IRQ,Trap,Exception} K/U mode from pt_regs->status32 + ld r8, [sp, PT_status32] ; returning to User/Kernel Mode + + bbit0 r8, STATUS_U_BIT, resume_kernel_mode + + ; Before returning to User mode check-for-and-complete any pending work + ; such as rescheduling/signal-delivery etc. +resume_user_mode_begin: + + ; Disable IRQs to ensures that chk for pending work itself is atomic + ; (and we don't end up missing a NEED_RESCHED/SIGPENDING due to an + ; interim IRQ). + IRQ_DISABLE r10 + + ; Fast Path return to user mode if no pending work + GET_CURR_THR_INFO_FLAGS r9 + and.f 0, r9, _TIF_WORK_MASK + bz .Lrestore_regs + + ; --- (Slow Path #1) task preemption --- + bbit0 r9, TIF_NEED_RESCHED, .Lchk_pend_signals + mov blink, resume_user_mode_begin ; tail-call to U mode ret chks + j @schedule ; BTST+Bnz causes relo error in link + +.Lchk_pend_signals: + IRQ_ENABLE r10 + + ; --- (Slow Path #2) pending signal --- + mov r0, sp ; pt_regs for arg to do_signal()/do_notify_resume() + + GET_CURR_THR_INFO_FLAGS r9 + and.f 0, r9, _TIF_SIGPENDING|_TIF_NOTIFY_SIGNAL + bz .Lchk_notify_resume + + ; Normal Trap/IRQ entry only saves Scratch (caller-saved) regs + ; in pt_reg since the "C" ABI (kernel code) will automatically + ; save/restore callee-saved regs. + ; + ; However, here we need to explicitly save callee regs because + ; (i) If this signal causes coredump - full regfile needed + ; (ii) If signal is SIGTRAP/SIGSTOP, task is being traced thus + ; tracer might call PEEKUSR(CALLEE reg) + ; + ; NOTE: SP will grow up by size of CALLEE Reg-File + SAVE_CALLEE_SAVED_USER + + ; save location of saved Callee Regs @ thread_struct->callee + GET_CURR_TASK_FIELD_PTR TASK_THREAD, r10 + st sp, [r10, THREAD_CALLEE_REG] + + bl @do_signal + + ; Ideally we want to discard the Callee reg above, however if this was + ; a tracing signal, tracer could have done a POKEUSR(CALLEE reg) + RESTORE_CALLEE_SAVED_USER + + b resume_user_mode_begin ; loop back to start of U mode ret + + ; --- (Slow Path #3) notify_resume --- +.Lchk_notify_resume: + btst r9, TIF_NOTIFY_RESUME + blnz @do_notify_resume + b resume_user_mode_begin ; unconditionally back to U mode ret chks + ; for single exit point from this block + +resume_kernel_mode: + + ; Disable Interrupts from this point on + ; CONFIG_PREEMPTION: This is a must for preempt_schedule_irq() + ; !CONFIG_PREEMPTION: To ensure restore_regs is intr safe + IRQ_DISABLE r9 + +#ifdef CONFIG_PREEMPTION + + ; Can't preempt if preemption disabled + GET_CURR_THR_INFO_FROM_SP r10 + ld r8, [r10, THREAD_INFO_PREEMPT_COUNT] + brne r8, 0, .Lrestore_regs + + ; check if this task's NEED_RESCHED flag set + ld r9, [r10, THREAD_INFO_FLAGS] + bbit0 r9, TIF_NEED_RESCHED, .Lrestore_regs + + ; Invoke PREEMPTION + jl preempt_schedule_irq + + ; preempt_schedule_irq() always returns with IRQ disabled +#endif + + b .Lrestore_regs + +##### DONT ADD CODE HERE - .Lrestore_regs actually follows in entry-<isa>.S + diff --git a/arch/arc/kernel/fpu.c b/arch/arc/kernel/fpu.c new file mode 100644 index 0000000000..ec640219d9 --- /dev/null +++ b/arch/arc/kernel/fpu.c @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * fpu.c - save/restore of Floating Point Unit Registers on task switch + * + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#include <linux/sched.h> +#include <asm/fpu.h> + +#ifdef CONFIG_ISA_ARCOMPACT + +/* + * To save/restore FPU regs, simplest scheme would use LR/SR insns. + * However since SR serializes the pipeline, an alternate "hack" can be used + * which uses the FPU Exchange insn (DEXCL) to r/w FPU regs. + * + * Store to 64bit dpfp1 reg from a pair of core regs: + * dexcl1 0, r1, r0 ; where r1:r0 is the 64 bit val + * + * Read from dpfp1 into pair of core regs (w/o clobbering dpfp1) + * mov_s r3, 0 + * daddh11 r1, r3, r3 ; get "hi" into r1 (dpfp1 unchanged) + * dexcl1 r0, r1, r3 ; get "low" into r0 (dpfp1 low clobbered) + * dexcl1 0, r1, r0 ; restore dpfp1 to orig value + * + * However we can tweak the read, so that read-out of outgoing task's FPU regs + * and write of incoming task's regs happen in one shot. So all the work is + * done before context switch + */ + +void fpu_save_restore(struct task_struct *prev, struct task_struct *next) +{ + unsigned int *saveto = &prev->thread.fpu.aux_dpfp[0].l; + unsigned int *readfrom = &next->thread.fpu.aux_dpfp[0].l; + + const unsigned int zero = 0; + + __asm__ __volatile__( + "daddh11 %0, %2, %2\n" + "dexcl1 %1, %3, %4\n" + : "=&r" (*(saveto + 1)), /* early clobber must here */ + "=&r" (*(saveto)) + : "r" (zero), "r" (*(readfrom + 1)), "r" (*(readfrom)) + ); + + __asm__ __volatile__( + "daddh22 %0, %2, %2\n" + "dexcl2 %1, %3, %4\n" + : "=&r"(*(saveto + 3)), /* early clobber must here */ + "=&r"(*(saveto + 2)) + : "r" (zero), "r" (*(readfrom + 3)), "r" (*(readfrom + 2)) + ); +} + +#else + +void fpu_init_task(struct pt_regs *regs) +{ + const unsigned int fwe = 0x80000000; + + /* default rounding mode */ + write_aux_reg(ARC_REG_FPU_CTRL, 0x100); + + /* Initialize to zero: setting requires FWE be set */ + write_aux_reg(ARC_REG_FPU_STATUS, fwe); +} + +void fpu_save_restore(struct task_struct *prev, struct task_struct *next) +{ + struct arc_fpu *save = &prev->thread.fpu; + struct arc_fpu *restore = &next->thread.fpu; + const unsigned int fwe = 0x80000000; + + save->ctrl = read_aux_reg(ARC_REG_FPU_CTRL); + save->status = read_aux_reg(ARC_REG_FPU_STATUS); + + write_aux_reg(ARC_REG_FPU_CTRL, restore->ctrl); + write_aux_reg(ARC_REG_FPU_STATUS, (fwe | restore->status)); +} + +#endif diff --git a/arch/arc/kernel/head.S b/arch/arc/kernel/head.S new file mode 100644 index 0000000000..9152782444 --- /dev/null +++ b/arch/arc/kernel/head.S @@ -0,0 +1,173 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * ARC CPU startup Code + * + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * Vineetg: Dec 2007 + * -Check if we are running on Simulator or on real hardware + * to skip certain things during boot on simulator + */ + +#include <linux/linkage.h> +#include <asm/asm-offsets.h> +#include <asm/entry.h> +#include <asm/arcregs.h> +#include <asm/cache.h> +#include <asm/dsp-impl.h> +#include <asm/irqflags.h> + +.macro CPU_EARLY_SETUP + + ; Setting up Vectror Table (in case exception happens in early boot + sr @_int_vec_base_lds, [AUX_INTR_VEC_BASE] + + ; Disable I-cache/D-cache if kernel so configured + lr r5, [ARC_REG_IC_BCR] + breq r5, 0, 1f ; I$ doesn't exist + lr r5, [ARC_REG_IC_CTRL] +#ifdef CONFIG_ARC_HAS_ICACHE + bclr r5, r5, 0 ; 0 - Enable, 1 is Disable +#else + bset r5, r5, 0 ; I$ exists, but is not used +#endif + sr r5, [ARC_REG_IC_CTRL] + +1: + lr r5, [ARC_REG_DC_BCR] + breq r5, 0, 1f ; D$ doesn't exist + lr r5, [ARC_REG_DC_CTRL] + bclr r5, r5, 6 ; Invalidate (discard w/o wback) +#ifdef CONFIG_ARC_HAS_DCACHE + bclr r5, r5, 0 ; Enable (+Inv) +#else + bset r5, r5, 0 ; Disable (+Inv) +#endif + sr r5, [ARC_REG_DC_CTRL] + +1: + +#ifdef CONFIG_ISA_ARCV2 + ; Unaligned access is disabled at reset, so re-enable early as + ; gcc 7.3.1 (ARC GNU 2018.03) onwards generates unaligned access + ; by default + lr r5, [status32] +#ifdef CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS + bset r5, r5, STATUS_AD_BIT +#else + ; Although disabled at reset, bootloader might have enabled it + bclr r5, r5, STATUS_AD_BIT +#endif + kflag r5 + +#ifdef CONFIG_ARC_LPB_DISABLE + lr r5, [ARC_REG_LPB_BUILD] + breq r5, 0, 1f ; LPB doesn't exist + mov r5, 1 + sr r5, [ARC_REG_LPB_CTRL] +1: +#endif /* CONFIG_ARC_LPB_DISABLE */ + + /* On HSDK, CCMs need to remapped super early */ +#ifdef CONFIG_ARC_SOC_HSDK + mov r6, 0x60000000 + lr r5, [ARC_REG_ICCM_BUILD] + breq r5, 0, 1f + sr r6, [ARC_REG_AUX_ICCM] +1: + lr r5, [ARC_REG_DCCM_BUILD] + breq r5, 0, 2f + sr r6, [ARC_REG_AUX_DCCM] +2: +#endif /* CONFIG_ARC_SOC_HSDK */ + +#endif /* CONFIG_ISA_ARCV2 */ + + ; Config DSP_CTRL properly, so kernel may use integer multiply, + ; multiply-accumulate, and divide operations + DSP_EARLY_INIT +.endm + + .section .init.text, "ax",@progbits + +;---------------------------------------------------------------- +; Default Reset Handler (jumped into from Reset vector) +; - Don't clobber r0,r1,r2 as they might have u-boot provided args +; - Platforms can override this weak version if needed +;---------------------------------------------------------------- +WEAK(res_service) + j stext +END(res_service) + +;---------------------------------------------------------------- +; Kernel Entry point +;---------------------------------------------------------------- +ENTRY(stext) + + CPU_EARLY_SETUP + +#ifdef CONFIG_SMP + GET_CPU_ID r5 + cmp r5, 0 + mov.nz r0, r5 + bz .Lmaster_proceed + + ; Non-Masters wait for Master to boot enough and bring them up + ; when they resume, tail-call to entry point + mov blink, @first_lines_of_secondary + j arc_platform_smp_wait_to_boot + +.Lmaster_proceed: +#endif + + ; Clear BSS before updating any globals + ; XXX: use ZOL here + mov r5, __bss_start + sub r6, __bss_stop, r5 + lsr.f lp_count, r6, 2 + lpnz 1f + st.ab 0, [r5, 4] +1: + + ; Uboot - kernel ABI + ; r0 = [0] No uboot interaction, [1] cmdline in r2, [2] DTB in r2 + ; r1 = magic number (always zero as of now) + ; r2 = pointer to uboot provided cmdline or external DTB in mem + ; These are handled later in handle_uboot_args() + st r0, [@uboot_tag] + st r1, [@uboot_magic] + st r2, [@uboot_arg] + + ; setup "current" tsk and optionally cache it in dedicated r25 + mov r9, @init_task + SET_CURR_TASK_ON_CPU r9, r0 ; r9 = tsk, r0 = scratch + + ; setup stack (fp, sp) + mov fp, 0 + + ; tsk->thread_info is really a PAGE, whose bottom hoists stack + GET_TSK_STACK_BASE r9, sp ; r9 = tsk, sp = stack base(output) + + j start_kernel ; "C" entry point +END(stext) + +#ifdef CONFIG_SMP +;---------------------------------------------------------------- +; First lines of code run by secondary before jumping to 'C' +;---------------------------------------------------------------- + .section .text, "ax",@progbits +ENTRY(first_lines_of_secondary) + + ; setup per-cpu idle task as "current" on this CPU + ld r0, [@secondary_idle_tsk] + SET_CURR_TASK_ON_CPU r0, r1 + + ; setup stack (fp, sp) + mov fp, 0 + + ; set it's stack base to tsk->thread_info bottom + GET_TSK_STACK_BASE r0, sp + + j start_kernel_secondary +END(first_lines_of_secondary) +#endif diff --git a/arch/arc/kernel/intc-arcv2.c b/arch/arc/kernel/intc-arcv2.c new file mode 100644 index 0000000000..678898757e --- /dev/null +++ b/arch/arc/kernel/intc-arcv2.c @@ -0,0 +1,191 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2014 Synopsys, Inc. (www.synopsys.com) + */ + +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/irqdomain.h> +#include <linux/irqchip.h> +#include <asm/irq.h> + +#define NR_EXCEPTIONS 16 + +struct bcr_irq_arcv2 { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int pad:3, firq:1, prio:4, exts:8, irqs:8, ver:8; +#else + unsigned int ver:8, irqs:8, exts:8, prio:4, firq:1, pad:3; +#endif +}; + +/* + * Early Hardware specific Interrupt setup + * -Called very early (start_kernel -> setup_arch -> setup_processor) + * -Platform Independent (must for any ARC Core) + * -Needed for each CPU (hence not foldable into init_IRQ) + */ +void arc_init_IRQ(void) +{ + unsigned int tmp, irq_prio, i; + struct bcr_irq_arcv2 irq_bcr; + + struct aux_irq_ctrl { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int res3:18, save_idx_regs:1, res2:1, + save_u_to_u:1, save_lp_regs:1, save_blink:1, + res:4, save_nr_gpr_pairs:5; +#else + unsigned int save_nr_gpr_pairs:5, res:4, + save_blink:1, save_lp_regs:1, save_u_to_u:1, + res2:1, save_idx_regs:1, res3:18; +#endif + } ictrl; + + *(unsigned int *)&ictrl = 0; + +#ifndef CONFIG_ARC_IRQ_NO_AUTOSAVE + ictrl.save_nr_gpr_pairs = 6; /* r0 to r11 (r12 saved manually) */ + ictrl.save_blink = 1; + ictrl.save_lp_regs = 1; /* LP_COUNT, LP_START, LP_END */ + ictrl.save_u_to_u = 0; /* user ctxt saved on kernel stack */ + ictrl.save_idx_regs = 1; /* JLI, LDI, EI */ +#endif + + WRITE_AUX(AUX_IRQ_CTRL, ictrl); + + /* + * ARCv2 core intc provides multiple interrupt priorities (upto 16). + * Typical builds though have only two levels (0-high, 1-low) + * Linux by default uses lower prio 1 for most irqs, reserving 0 for + * NMI style interrupts in future (say perf) + */ + + READ_BCR(ARC_REG_IRQ_BCR, irq_bcr); + + irq_prio = irq_bcr.prio; /* Encoded as N-1 for N levels */ + pr_info("archs-intc\t: %d priority levels (default %d)%s\n", + irq_prio + 1, ARCV2_IRQ_DEF_PRIO, + irq_bcr.firq ? " FIRQ (not used)":""); + + /* + * Set a default priority for all available interrupts to prevent + * switching of register banks if Fast IRQ and multiple register banks + * are supported by CPU. + * Also disable private-per-core IRQ lines so faulty external HW won't + * trigger interrupt that kernel is not ready to handle. + */ + for (i = NR_EXCEPTIONS; i < irq_bcr.irqs + NR_EXCEPTIONS; i++) { + write_aux_reg(AUX_IRQ_SELECT, i); + write_aux_reg(AUX_IRQ_PRIORITY, ARCV2_IRQ_DEF_PRIO); + + /* + * Only mask cpu private IRQs here. + * "common" interrupts are masked at IDU, otherwise it would + * need to be unmasked at each cpu, with IPIs + */ + if (i < FIRST_EXT_IRQ) + write_aux_reg(AUX_IRQ_ENABLE, 0); + } + + /* setup status32, don't enable intr yet as kernel doesn't want */ + tmp = read_aux_reg(ARC_REG_STATUS32); + tmp |= ARCV2_IRQ_DEF_PRIO << 1; + tmp &= ~STATUS_IE_MASK; + asm volatile("kflag %0 \n"::"r"(tmp)); +} + +static void arcv2_irq_mask(struct irq_data *data) +{ + write_aux_reg(AUX_IRQ_SELECT, data->hwirq); + write_aux_reg(AUX_IRQ_ENABLE, 0); +} + +static void arcv2_irq_unmask(struct irq_data *data) +{ + write_aux_reg(AUX_IRQ_SELECT, data->hwirq); + write_aux_reg(AUX_IRQ_ENABLE, 1); +} + +static void arcv2_irq_enable(struct irq_data *data) +{ + /* set default priority */ + write_aux_reg(AUX_IRQ_SELECT, data->hwirq); + write_aux_reg(AUX_IRQ_PRIORITY, ARCV2_IRQ_DEF_PRIO); + + /* + * hw auto enables (linux unmask) all by default + * So no need to do IRQ_ENABLE here + * XXX: However OSCI LAN need it + */ + write_aux_reg(AUX_IRQ_ENABLE, 1); +} + +static struct irq_chip arcv2_irq_chip = { + .name = "ARCv2 core Intc", + .irq_mask = arcv2_irq_mask, + .irq_unmask = arcv2_irq_unmask, + .irq_enable = arcv2_irq_enable +}; + +static int arcv2_irq_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hw) +{ + /* + * core intc IRQs [16, 23]: + * Statically assigned always private-per-core (Timers, WDT, IPI, PCT) + */ + if (hw < FIRST_EXT_IRQ) { + /* + * A subsequent request_percpu_irq() fails if percpu_devid is + * not set. That in turns sets NOAUTOEN, meaning each core needs + * to call enable_percpu_irq() + */ + irq_set_percpu_devid(irq); + irq_set_chip_and_handler(irq, &arcv2_irq_chip, handle_percpu_irq); + } else { + irq_set_chip_and_handler(irq, &arcv2_irq_chip, handle_level_irq); + } + + return 0; +} + +static const struct irq_domain_ops arcv2_irq_ops = { + .xlate = irq_domain_xlate_onecell, + .map = arcv2_irq_map, +}; + + +static int __init +init_onchip_IRQ(struct device_node *intc, struct device_node *parent) +{ + struct irq_domain *root_domain; + struct bcr_irq_arcv2 irq_bcr; + unsigned int nr_cpu_irqs; + + READ_BCR(ARC_REG_IRQ_BCR, irq_bcr); + nr_cpu_irqs = irq_bcr.irqs + NR_EXCEPTIONS; + + if (parent) + panic("DeviceTree incore intc not a root irq controller\n"); + + root_domain = irq_domain_add_linear(intc, nr_cpu_irqs, &arcv2_irq_ops, NULL); + if (!root_domain) + panic("root irq domain not avail\n"); + + /* + * Needed for primary domain lookup to succeed + * This is a primary irqchip, and can never have a parent + */ + irq_set_default_host(root_domain); + +#ifdef CONFIG_SMP + irq_create_mapping(root_domain, IPI_IRQ); +#endif + irq_create_mapping(root_domain, SOFTIRQ_IRQ); + + return 0; +} + +IRQCHIP_DECLARE(arc_intc, "snps,archs-intc", init_onchip_IRQ); diff --git a/arch/arc/kernel/intc-compact.c b/arch/arc/kernel/intc-compact.c new file mode 100644 index 0000000000..6885e42287 --- /dev/null +++ b/arch/arc/kernel/intc-compact.c @@ -0,0 +1,170 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2011-12 Synopsys, Inc. (www.synopsys.com) + */ + +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/irqdomain.h> +#include <linux/irqchip.h> +#include <asm/irq.h> + +#define NR_CPU_IRQS 32 /* number of irq lines coming in */ +#define TIMER0_IRQ 3 /* Fixed by ISA */ + +/* + * Early Hardware specific Interrupt setup + * -Platform independent, needed for each CPU (not foldable into init_IRQ) + * -Called very early (start_kernel -> setup_arch -> setup_processor) + * + * what it does ? + * -Optionally, setup the High priority Interrupts as Level 2 IRQs + */ +void arc_init_IRQ(void) +{ + unsigned int level_mask = 0, i; + + /* Is timer high priority Interrupt (Level2 in ARCompact jargon) */ + level_mask |= IS_ENABLED(CONFIG_ARC_COMPACT_IRQ_LEVELS) << TIMER0_IRQ; + + /* + * Write to register, even if no LV2 IRQs configured to reset it + * in case bootloader had mucked with it + */ + write_aux_reg(AUX_IRQ_LEV, level_mask); + + if (level_mask) + pr_info("Level-2 interrupts bitset %x\n", level_mask); + + /* + * Disable all IRQ lines so faulty external hardware won't + * trigger interrupt that kernel is not ready to handle. + */ + for (i = TIMER0_IRQ; i < NR_CPU_IRQS; i++) { + unsigned int ienb; + + ienb = read_aux_reg(AUX_IENABLE); + ienb &= ~(1 << i); + write_aux_reg(AUX_IENABLE, ienb); + } +} + +/* + * ARC700 core includes a simple on-chip intc supporting + * -per IRQ enable/disable + * -2 levels of interrupts (high/low) + * -all interrupts being level triggered + * + * To reduce platform code, we assume all IRQs directly hooked-up into intc. + * Platforms with external intc, hence cascaded IRQs, are free to over-ride + * below, per IRQ. + */ + +static void arc_irq_mask(struct irq_data *data) +{ + unsigned int ienb; + + ienb = read_aux_reg(AUX_IENABLE); + ienb &= ~(1 << data->hwirq); + write_aux_reg(AUX_IENABLE, ienb); +} + +static void arc_irq_unmask(struct irq_data *data) +{ + unsigned int ienb; + + ienb = read_aux_reg(AUX_IENABLE); + ienb |= (1 << data->hwirq); + write_aux_reg(AUX_IENABLE, ienb); +} + +static struct irq_chip onchip_intc = { + .name = "ARC In-core Intc", + .irq_mask = arc_irq_mask, + .irq_unmask = arc_irq_unmask, +}; + +static int arc_intc_domain_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hw) +{ + switch (hw) { + case TIMER0_IRQ: + irq_set_percpu_devid(irq); + irq_set_chip_and_handler(irq, &onchip_intc, handle_percpu_irq); + break; + default: + irq_set_chip_and_handler(irq, &onchip_intc, handle_level_irq); + } + return 0; +} + +static const struct irq_domain_ops arc_intc_domain_ops = { + .xlate = irq_domain_xlate_onecell, + .map = arc_intc_domain_map, +}; + +static int __init +init_onchip_IRQ(struct device_node *intc, struct device_node *parent) +{ + struct irq_domain *root_domain; + + if (parent) + panic("DeviceTree incore intc not a root irq controller\n"); + + root_domain = irq_domain_add_linear(intc, NR_CPU_IRQS, + &arc_intc_domain_ops, NULL); + if (!root_domain) + panic("root irq domain not avail\n"); + + /* + * Needed for primary domain lookup to succeed + * This is a primary irqchip, and can never have a parent + */ + irq_set_default_host(root_domain); + + return 0; +} + +IRQCHIP_DECLARE(arc_intc, "snps,arc700-intc", init_onchip_IRQ); + +/* + * arch_local_irq_enable - Enable interrupts. + * + * 1. Explicitly called to re-enable interrupts + * 2. Implicitly called from spin_unlock_irq, write_unlock_irq etc + * which maybe in hard ISR itself + * + * Semantics of this function change depending on where it is called from: + * + * -If called from hard-ISR, it must not invert interrupt priorities + * e.g. suppose TIMER is high priority (Level 2) IRQ + * Time hard-ISR, timer_interrupt( ) calls spin_unlock_irq several times. + * Here local_irq_enable( ) shd not re-enable lower priority interrupts + * -If called from soft-ISR, it must re-enable all interrupts + * soft ISR are low priority jobs which can be very slow, thus all IRQs + * must be enabled while they run. + * Now hardware context wise we may still be in L2 ISR (not done rtie) + * still we must re-enable both L1 and L2 IRQs + * Another twist is prev scenario with flow being + * L1 ISR ==> interrupted by L2 ISR ==> L2 soft ISR + * here we must not re-enable Ll as prev Ll Interrupt's h/w context will get + * over-written (this is deficiency in ARC700 Interrupt mechanism) + */ + +#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS /* Complex version for 2 IRQ levels */ + +void arch_local_irq_enable(void) +{ + unsigned long flags = arch_local_save_flags(); + + if (flags & STATUS_A2_MASK) + flags |= STATUS_E2_MASK; + else if (flags & STATUS_A1_MASK) + flags |= STATUS_E1_MASK; + + arch_local_irq_restore(flags); +} + +EXPORT_SYMBOL(arch_local_irq_enable); +#endif diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c new file mode 100644 index 0000000000..dd09b58ff8 --- /dev/null +++ b/arch/arc/kernel/irq.c @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2011-12 Synopsys, Inc. (www.synopsys.com) + */ + +#include <linux/interrupt.h> +#include <linux/irqchip.h> +#include <asm/mach_desc.h> + +#include <asm/irq_regs.h> +#include <asm/smp.h> + +/* + * Late Interrupt system init called from start_kernel for Boot CPU only + * + * Since slab must already be initialized, platforms can start doing any + * needed request_irq( )s + */ +void __init init_IRQ(void) +{ + /* + * process the entire interrupt tree in one go + * Any external intc will be setup provided DT chains them + * properly + */ + irqchip_init(); + +#ifdef CONFIG_SMP + /* a SMP H/w block could do IPI IRQ request here */ + if (plat_smp_ops.init_per_cpu) + plat_smp_ops.init_per_cpu(smp_processor_id()); +#endif + + if (machine_desc->init_per_cpu) + machine_desc->init_per_cpu(smp_processor_id()); +} + +/* + * "C" Entry point for any ARC ISR, called from low level vector handler + * @irq is the vector number read from ICAUSE reg of on-chip intc + */ +void arch_do_IRQ(unsigned int hwirq, struct pt_regs *regs) +{ + struct pt_regs *old_regs; + + irq_enter(); + old_regs = set_irq_regs(regs); + generic_handle_domain_irq(NULL, hwirq); + set_irq_regs(old_regs); + irq_exit(); +} diff --git a/arch/arc/kernel/jump_label.c b/arch/arc/kernel/jump_label.c new file mode 100644 index 0000000000..70b74a5d04 --- /dev/null +++ b/arch/arc/kernel/jump_label.c @@ -0,0 +1,157 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/kernel.h> +#include <linux/jump_label.h> + +#include "asm/cacheflush.h" + +#define JUMPLABEL_ERR "ARC: jump_label: ERROR: " + +/* Halt system on fatal error to make debug easier */ +#define arc_jl_fatal(format...) \ +({ \ + pr_err(JUMPLABEL_ERR format); \ + BUG(); \ +}) + +static inline u32 arc_gen_nop(void) +{ + /* 1x 32bit NOP in middle endian */ + return 0x7000264a; +} + +/* + * Atomic update of patched instruction is only available if this + * instruction doesn't cross L1 cache line boundary. You can read about + * the way we achieve this in arc/include/asm/jump_label.h + */ +static inline void instruction_align_assert(void *addr, int len) +{ + unsigned long a = (unsigned long)addr; + + if ((a >> L1_CACHE_SHIFT) != ((a + len - 1) >> L1_CACHE_SHIFT)) + arc_jl_fatal("instruction (addr %px) cross L1 cache line border", + addr); +} + +/* + * ARCv2 'Branch unconditionally' instruction: + * 00000ssssssssss1SSSSSSSSSSNRtttt + * s S[n:0] lower bits signed immediate (number is bitfield size) + * S S[m:n+1] upper bits signed immediate (number is bitfield size) + * t S[24:21] upper bits signed immediate (branch unconditionally far) + * N N <.d> delay slot mode + * R R Reserved + */ +static inline u32 arc_gen_branch(jump_label_t pc, jump_label_t target) +{ + u32 instruction_l, instruction_r; + u32 pcl = pc & GENMASK(31, 2); + u32 u_offset = target - pcl; + u32 s, S, t; + + /* + * Offset in 32-bit branch instruction must to fit into s25. + * Something is terribly broken if we get such huge offset within one + * function. + */ + if ((s32)u_offset < -16777216 || (s32)u_offset > 16777214) + arc_jl_fatal("gen branch with offset (%d) not fit in s25", + (s32)u_offset); + + /* + * All instructions are aligned by 2 bytes so we should never get offset + * here which is not 2 bytes aligned. + */ + if (u_offset & 0x1) + arc_jl_fatal("gen branch with offset (%d) unaligned to 2 bytes", + (s32)u_offset); + + s = (u_offset >> 1) & GENMASK(9, 0); + S = (u_offset >> 11) & GENMASK(9, 0); + t = (u_offset >> 21) & GENMASK(3, 0); + + /* 00000ssssssssss1 */ + instruction_l = (s << 1) | 0x1; + /* SSSSSSSSSSNRtttt */ + instruction_r = (S << 6) | t; + + return (instruction_r << 16) | (instruction_l & GENMASK(15, 0)); +} + +void arch_jump_label_transform(struct jump_entry *entry, + enum jump_label_type type) +{ + jump_label_t *instr_addr = (jump_label_t *)entry->code; + u32 instr; + + instruction_align_assert(instr_addr, JUMP_LABEL_NOP_SIZE); + + if (type == JUMP_LABEL_JMP) + instr = arc_gen_branch(entry->code, entry->target); + else + instr = arc_gen_nop(); + + WRITE_ONCE(*instr_addr, instr); + flush_icache_range(entry->code, entry->code + JUMP_LABEL_NOP_SIZE); +} + +#ifdef CONFIG_ARC_DBG_JUMP_LABEL +#define SELFTEST_MSG "ARC: instruction generation self-test: " + +struct arc_gen_branch_testdata { + jump_label_t pc; + jump_label_t target_address; + u32 expected_instr; +}; + +static __init int branch_gen_test(const struct arc_gen_branch_testdata *test) +{ + u32 instr_got; + + instr_got = arc_gen_branch(test->pc, test->target_address); + if (instr_got == test->expected_instr) + return 0; + + pr_err(SELFTEST_MSG "FAIL:\n arc_gen_branch(0x%08x, 0x%08x) != 0x%08x, got 0x%08x\n", + test->pc, test->target_address, + test->expected_instr, instr_got); + + return -EFAULT; +} + +/* + * Offset field in branch instruction is not continuous. Test all + * available offset field and sign combinations. Test data is generated + * from real working code. + */ +static const struct arc_gen_branch_testdata arcgenbr_test_data[] __initconst = { + {0x90007548, 0x90007514, 0xffcf07cd}, /* tiny (-52) offs */ + {0x9000c9c0, 0x9000c782, 0xffcf05c3}, /* tiny (-574) offs */ + {0x9000cc1c, 0x9000c782, 0xffcf0367}, /* tiny (-1178) offs */ + {0x9009dce0, 0x9009d106, 0xff8f0427}, /* small (-3034) offs */ + {0x9000f5de, 0x90007d30, 0xfc0f0755}, /* big (-30892) offs */ + {0x900a2444, 0x90035f64, 0xc9cf0321}, /* huge (-443616) offs */ + {0x90007514, 0x9000752c, 0x00000019}, /* tiny (+24) offs */ + {0x9001a578, 0x9001a77a, 0x00000203}, /* tiny (+514) offs */ + {0x90031ed8, 0x90032634, 0x0000075d}, /* tiny (+1884) offs */ + {0x9008c7f2, 0x9008d3f0, 0x00400401}, /* small (+3072) offs */ + {0x9000bb38, 0x9003b340, 0x17c00009}, /* big (+194568) offs */ + {0x90008f44, 0x90578d80, 0xb7c2063d} /* huge (+5701180) offs */ +}; + +static __init int instr_gen_test(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(arcgenbr_test_data); i++) + if (branch_gen_test(&arcgenbr_test_data[i])) + return -EFAULT; + + pr_info(SELFTEST_MSG "OK\n"); + + return 0; +} +early_initcall(instr_gen_test); + +#endif /* CONFIG_ARC_DBG_JUMP_LABEL */ diff --git a/arch/arc/kernel/kgdb.c b/arch/arc/kernel/kgdb.c new file mode 100644 index 0000000000..4f2b595145 --- /dev/null +++ b/arch/arc/kernel/kgdb.c @@ -0,0 +1,206 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * kgdb support for ARC + * + * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com) + */ + +#include <linux/kgdb.h> +#include <linux/sched.h> +#include <linux/sched/task_stack.h> +#include <asm/disasm.h> +#include <asm/cacheflush.h> + +static void to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs, + struct callee_regs *cregs) +{ + int regno; + + for (regno = 0; regno <= 26; regno++) + gdb_regs[_R0 + regno] = get_reg(regno, kernel_regs, cregs); + + for (regno = 27; regno < GDB_MAX_REGS; regno++) + gdb_regs[regno] = 0; + + gdb_regs[_FP] = kernel_regs->fp; + gdb_regs[__SP] = kernel_regs->sp; + gdb_regs[_BLINK] = kernel_regs->blink; + gdb_regs[_RET] = kernel_regs->ret; + gdb_regs[_STATUS32] = kernel_regs->status32; + gdb_regs[_LP_COUNT] = kernel_regs->lp_count; + gdb_regs[_LP_END] = kernel_regs->lp_end; + gdb_regs[_LP_START] = kernel_regs->lp_start; + gdb_regs[_BTA] = kernel_regs->bta; + gdb_regs[_STOP_PC] = kernel_regs->ret; +} + +static void from_gdb_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs, + struct callee_regs *cregs) +{ + int regno; + + for (regno = 0; regno <= 26; regno++) + set_reg(regno, gdb_regs[regno + _R0], kernel_regs, cregs); + + kernel_regs->fp = gdb_regs[_FP]; + kernel_regs->sp = gdb_regs[__SP]; + kernel_regs->blink = gdb_regs[_BLINK]; + kernel_regs->ret = gdb_regs[_RET]; + kernel_regs->status32 = gdb_regs[_STATUS32]; + kernel_regs->lp_count = gdb_regs[_LP_COUNT]; + kernel_regs->lp_end = gdb_regs[_LP_END]; + kernel_regs->lp_start = gdb_regs[_LP_START]; + kernel_regs->bta = gdb_regs[_BTA]; +} + + +void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs) +{ + to_gdb_regs(gdb_regs, kernel_regs, (struct callee_regs *) + current->thread.callee_reg); +} + +void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs) +{ + from_gdb_regs(gdb_regs, kernel_regs, (struct callee_regs *) + current->thread.callee_reg); +} + +void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, + struct task_struct *task) +{ + if (task) + to_gdb_regs(gdb_regs, task_pt_regs(task), + (struct callee_regs *) task->thread.callee_reg); +} + +struct single_step_data_t { + uint16_t opcode[2]; + unsigned long address[2]; + int is_branch; + int armed; +} single_step_data; + +static void undo_single_step(struct pt_regs *regs) +{ + if (single_step_data.armed) { + int i; + + for (i = 0; i < (single_step_data.is_branch ? 2 : 1); i++) { + memcpy((void *) single_step_data.address[i], + &single_step_data.opcode[i], + BREAK_INSTR_SIZE); + + flush_icache_range(single_step_data.address[i], + single_step_data.address[i] + + BREAK_INSTR_SIZE); + } + single_step_data.armed = 0; + } +} + +static void place_trap(unsigned long address, void *save) +{ + memcpy(save, (void *) address, BREAK_INSTR_SIZE); + memcpy((void *) address, &arch_kgdb_ops.gdb_bpt_instr, + BREAK_INSTR_SIZE); + flush_icache_range(address, address + BREAK_INSTR_SIZE); +} + +static void do_single_step(struct pt_regs *regs) +{ + single_step_data.is_branch = disasm_next_pc((unsigned long) + regs->ret, regs, (struct callee_regs *) + current->thread.callee_reg, + &single_step_data.address[0], + &single_step_data.address[1]); + + place_trap(single_step_data.address[0], &single_step_data.opcode[0]); + + if (single_step_data.is_branch) { + place_trap(single_step_data.address[1], + &single_step_data.opcode[1]); + } + + single_step_data.armed++; +} + +int kgdb_arch_handle_exception(int e_vector, int signo, int err_code, + char *remcomInBuffer, char *remcomOutBuffer, + struct pt_regs *regs) +{ + unsigned long addr; + char *ptr; + + undo_single_step(regs); + + switch (remcomInBuffer[0]) { + case 's': + case 'c': + ptr = &remcomInBuffer[1]; + if (kgdb_hex2long(&ptr, &addr)) + regs->ret = addr; + fallthrough; + + case 'D': + case 'k': + atomic_set(&kgdb_cpu_doing_single_step, -1); + + if (remcomInBuffer[0] == 's') { + do_single_step(regs); + atomic_set(&kgdb_cpu_doing_single_step, + smp_processor_id()); + } + + return 0; + } + return -1; +} + +int kgdb_arch_init(void) +{ + single_step_data.armed = 0; + return 0; +} + +void kgdb_trap(struct pt_regs *regs) +{ + /* trap_s 3 is used for breakpoints that overwrite existing + * instructions, while trap_s 4 is used for compiled breakpoints. + * + * with trap_s 3 breakpoints the original instruction needs to be + * restored and continuation needs to start at the location of the + * breakpoint. + * + * with trap_s 4 (compiled) breakpoints, continuation needs to + * start after the breakpoint. + */ + if (regs->ecr.param == 3) + instruction_pointer(regs) -= BREAK_INSTR_SIZE; + + kgdb_handle_exception(1, SIGTRAP, 0, regs); +} + +void kgdb_arch_exit(void) +{ +} + +void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long ip) +{ + instruction_pointer(regs) = ip; +} + +void kgdb_call_nmi_hook(void *ignored) +{ + /* Default implementation passes get_irq_regs() but we don't */ + kgdb_nmicallback(raw_smp_processor_id(), NULL); +} + +const struct kgdb_arch arch_kgdb_ops = { + /* breakpoint instruction: TRAP_S 0x3 */ +#ifdef CONFIG_CPU_BIG_ENDIAN + .gdb_bpt_instr = {0x78, 0x7e}, +#else + .gdb_bpt_instr = {0x7e, 0x78}, +#endif +}; diff --git a/arch/arc/kernel/kprobes.c b/arch/arc/kernel/kprobes.c new file mode 100644 index 0000000000..e71d64119d --- /dev/null +++ b/arch/arc/kernel/kprobes.c @@ -0,0 +1,415 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#include <linux/types.h> +#include <linux/kprobes.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/kdebug.h> +#include <linux/sched.h> +#include <linux/uaccess.h> +#include <asm/cacheflush.h> +#include <asm/current.h> +#include <asm/disasm.h> + +#define MIN_STACK_SIZE(addr) min((unsigned long)MAX_STACK_SIZE, \ + (unsigned long)current_thread_info() + THREAD_SIZE - (addr)) + +DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; +DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); + +int __kprobes arch_prepare_kprobe(struct kprobe *p) +{ + /* Attempt to probe at unaligned address */ + if ((unsigned long)p->addr & 0x01) + return -EINVAL; + + /* Address should not be in exception handling code */ + + p->ainsn.is_short = is_short_instr((unsigned long)p->addr); + p->opcode = *p->addr; + + return 0; +} + +void __kprobes arch_arm_kprobe(struct kprobe *p) +{ + *p->addr = UNIMP_S_INSTRUCTION; + + flush_icache_range((unsigned long)p->addr, + (unsigned long)p->addr + sizeof(kprobe_opcode_t)); +} + +void __kprobes arch_disarm_kprobe(struct kprobe *p) +{ + *p->addr = p->opcode; + + flush_icache_range((unsigned long)p->addr, + (unsigned long)p->addr + sizeof(kprobe_opcode_t)); +} + +void __kprobes arch_remove_kprobe(struct kprobe *p) +{ + arch_disarm_kprobe(p); + + /* Can we remove the kprobe in the middle of kprobe handling? */ + if (p->ainsn.t1_addr) { + *(p->ainsn.t1_addr) = p->ainsn.t1_opcode; + + flush_icache_range((unsigned long)p->ainsn.t1_addr, + (unsigned long)p->ainsn.t1_addr + + sizeof(kprobe_opcode_t)); + + p->ainsn.t1_addr = NULL; + } + + if (p->ainsn.t2_addr) { + *(p->ainsn.t2_addr) = p->ainsn.t2_opcode; + + flush_icache_range((unsigned long)p->ainsn.t2_addr, + (unsigned long)p->ainsn.t2_addr + + sizeof(kprobe_opcode_t)); + + p->ainsn.t2_addr = NULL; + } +} + +static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb) +{ + kcb->prev_kprobe.kp = kprobe_running(); + kcb->prev_kprobe.status = kcb->kprobe_status; +} + +static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb) +{ + __this_cpu_write(current_kprobe, kcb->prev_kprobe.kp); + kcb->kprobe_status = kcb->prev_kprobe.status; +} + +static inline void __kprobes set_current_kprobe(struct kprobe *p) +{ + __this_cpu_write(current_kprobe, p); +} + +static void __kprobes resume_execution(struct kprobe *p, unsigned long addr, + struct pt_regs *regs) +{ + /* Remove the trap instructions inserted for single step and + * restore the original instructions + */ + if (p->ainsn.t1_addr) { + *(p->ainsn.t1_addr) = p->ainsn.t1_opcode; + + flush_icache_range((unsigned long)p->ainsn.t1_addr, + (unsigned long)p->ainsn.t1_addr + + sizeof(kprobe_opcode_t)); + + p->ainsn.t1_addr = NULL; + } + + if (p->ainsn.t2_addr) { + *(p->ainsn.t2_addr) = p->ainsn.t2_opcode; + + flush_icache_range((unsigned long)p->ainsn.t2_addr, + (unsigned long)p->ainsn.t2_addr + + sizeof(kprobe_opcode_t)); + + p->ainsn.t2_addr = NULL; + } + + return; +} + +static void __kprobes setup_singlestep(struct kprobe *p, struct pt_regs *regs) +{ + unsigned long next_pc; + unsigned long tgt_if_br = 0; + int is_branch; + unsigned long bta; + + /* Copy the opcode back to the kprobe location and execute the + * instruction. Because of this we will not be able to get into the + * same kprobe until this kprobe is done + */ + *(p->addr) = p->opcode; + + flush_icache_range((unsigned long)p->addr, + (unsigned long)p->addr + sizeof(kprobe_opcode_t)); + + /* Now we insert the trap at the next location after this instruction to + * single step. If it is a branch we insert the trap at possible branch + * targets + */ + + bta = regs->bta; + + if (regs->status32 & 0x40) { + /* We are in a delay slot with the branch taken */ + + next_pc = bta & ~0x01; + + if (!p->ainsn.is_short) { + if (bta & 0x01) + regs->blink += 2; + else { + /* Branch not taken */ + next_pc += 2; + + /* next pc is taken from bta after executing the + * delay slot instruction + */ + regs->bta += 2; + } + } + + is_branch = 0; + } else + is_branch = + disasm_next_pc((unsigned long)p->addr, regs, + (struct callee_regs *) current->thread.callee_reg, + &next_pc, &tgt_if_br); + + p->ainsn.t1_addr = (kprobe_opcode_t *) next_pc; + p->ainsn.t1_opcode = *(p->ainsn.t1_addr); + *(p->ainsn.t1_addr) = TRAP_S_2_INSTRUCTION; + + flush_icache_range((unsigned long)p->ainsn.t1_addr, + (unsigned long)p->ainsn.t1_addr + + sizeof(kprobe_opcode_t)); + + if (is_branch) { + p->ainsn.t2_addr = (kprobe_opcode_t *) tgt_if_br; + p->ainsn.t2_opcode = *(p->ainsn.t2_addr); + *(p->ainsn.t2_addr) = TRAP_S_2_INSTRUCTION; + + flush_icache_range((unsigned long)p->ainsn.t2_addr, + (unsigned long)p->ainsn.t2_addr + + sizeof(kprobe_opcode_t)); + } +} + +int __kprobes arc_kprobe_handler(unsigned long addr, struct pt_regs *regs) +{ + struct kprobe *p; + struct kprobe_ctlblk *kcb; + + preempt_disable(); + + kcb = get_kprobe_ctlblk(); + p = get_kprobe((unsigned long *)addr); + + if (p) { + /* + * We have reentered the kprobe_handler, since another kprobe + * was hit while within the handler, we save the original + * kprobes and single step on the instruction of the new probe + * without calling any user handlers to avoid recursive + * kprobes. + */ + if (kprobe_running()) { + save_previous_kprobe(kcb); + set_current_kprobe(p); + kprobes_inc_nmissed_count(p); + setup_singlestep(p, regs); + kcb->kprobe_status = KPROBE_REENTER; + return 1; + } + + set_current_kprobe(p); + kcb->kprobe_status = KPROBE_HIT_ACTIVE; + + /* If we have no pre-handler or it returned 0, we continue with + * normal processing. If we have a pre-handler and it returned + * non-zero - which means user handler setup registers to exit + * to another instruction, we must skip the single stepping. + */ + if (!p->pre_handler || !p->pre_handler(p, regs)) { + setup_singlestep(p, regs); + kcb->kprobe_status = KPROBE_HIT_SS; + } else { + reset_current_kprobe(); + preempt_enable_no_resched(); + } + + return 1; + } + + /* no_kprobe: */ + preempt_enable_no_resched(); + return 0; +} + +static int __kprobes arc_post_kprobe_handler(unsigned long addr, + struct pt_regs *regs) +{ + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (!cur) + return 0; + + resume_execution(cur, addr, regs); + + /* Rearm the kprobe */ + arch_arm_kprobe(cur); + + /* + * When we return from trap instruction we go to the next instruction + * We restored the actual instruction in resume_exectuiont and we to + * return to the same address and execute it + */ + regs->ret = addr; + + if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) { + kcb->kprobe_status = KPROBE_HIT_SSDONE; + cur->post_handler(cur, regs, 0); + } + + if (kcb->kprobe_status == KPROBE_REENTER) { + restore_previous_kprobe(kcb); + goto out; + } + + reset_current_kprobe(); + +out: + preempt_enable_no_resched(); + return 1; +} + +/* + * Fault can be for the instruction being single stepped or for the + * pre/post handlers in the module. + * This is applicable for applications like user probes, where we have the + * probe in user space and the handlers in the kernel + */ + +int __kprobes kprobe_fault_handler(struct pt_regs *regs, unsigned long trapnr) +{ + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + switch (kcb->kprobe_status) { + case KPROBE_HIT_SS: + case KPROBE_REENTER: + /* + * We are here because the instruction being single stepped + * caused the fault. We reset the current kprobe and allow the + * exception handler as if it is regular exception. In our + * case it doesn't matter because the system will be halted + */ + resume_execution(cur, (unsigned long)cur->addr, regs); + + if (kcb->kprobe_status == KPROBE_REENTER) + restore_previous_kprobe(kcb); + else + reset_current_kprobe(); + + preempt_enable_no_resched(); + break; + + case KPROBE_HIT_ACTIVE: + case KPROBE_HIT_SSDONE: + /* + * We are here because the instructions in the pre/post handler + * caused the fault. + */ + + /* + * In case the user-specified fault handler returned zero, + * try to fix up. + */ + if (fixup_exception(regs)) + return 1; + + /* + * fixup_exception() could not handle it, + * Let do_page_fault() fix it. + */ + break; + + default: + break; + } + return 0; +} + +int __kprobes kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data) +{ + struct die_args *args = data; + unsigned long addr = args->err; + int ret = NOTIFY_DONE; + + switch (val) { + case DIE_IERR: + if (arc_kprobe_handler(addr, args->regs)) + return NOTIFY_STOP; + break; + + case DIE_TRAP: + if (arc_post_kprobe_handler(addr, args->regs)) + return NOTIFY_STOP; + break; + + default: + break; + } + + return ret; +} + +static void __used kretprobe_trampoline_holder(void) +{ + __asm__ __volatile__(".global __kretprobe_trampoline\n" + "__kretprobe_trampoline:\n" + "nop\n"); +} + +void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri, + struct pt_regs *regs) +{ + + ri->ret_addr = (kprobe_opcode_t *) regs->blink; + ri->fp = NULL; + + /* Replace the return addr with trampoline addr */ + regs->blink = (unsigned long)&__kretprobe_trampoline; +} + +static int __kprobes trampoline_probe_handler(struct kprobe *p, + struct pt_regs *regs) +{ + regs->ret = __kretprobe_trampoline_handler(regs, NULL); + + /* By returning a non zero value, we are telling the kprobe handler + * that we don't want the post_handler to run + */ + return 1; +} + +static struct kprobe trampoline_p = { + .addr = (kprobe_opcode_t *) &__kretprobe_trampoline, + .pre_handler = trampoline_probe_handler +}; + +int __init arch_init_kprobes(void) +{ + /* Registering the trampoline code for the kret probe */ + return register_kprobe(&trampoline_p); +} + +int __kprobes arch_trampoline_kprobe(struct kprobe *p) +{ + if (p->addr == (kprobe_opcode_t *) &__kretprobe_trampoline) + return 1; + + return 0; +} + +void trap_is_kprobe(unsigned long address, struct pt_regs *regs) +{ + notify_die(DIE_TRAP, "kprobe_trap", regs, address, 0, SIGTRAP); +} diff --git a/arch/arc/kernel/mcip.c b/arch/arc/kernel/mcip.c new file mode 100644 index 0000000000..55373ca0d2 --- /dev/null +++ b/arch/arc/kernel/mcip.c @@ -0,0 +1,419 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * ARC ARConnect (MultiCore IP) support (formerly known as MCIP) + * + * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com) + */ + +#include <linux/smp.h> +#include <linux/irq.h> +#include <linux/irqchip/chained_irq.h> +#include <linux/spinlock.h> +#include <soc/arc/mcip.h> +#include <asm/irqflags-arcv2.h> +#include <asm/setup.h> + +static DEFINE_RAW_SPINLOCK(mcip_lock); + +#ifdef CONFIG_SMP + +static char smp_cpuinfo_buf[128]; + +/* + * Set mask to halt GFRC if any online core in SMP cluster is halted. + * Only works for ARC HS v3.0+, on earlier versions has no effect. + */ +static void mcip_update_gfrc_halt_mask(int cpu) +{ + struct bcr_generic gfrc; + unsigned long flags; + u32 gfrc_halt_mask; + + READ_BCR(ARC_REG_GFRC_BUILD, gfrc); + + /* + * CMD_GFRC_SET_CORE and CMD_GFRC_READ_CORE commands were added in + * GFRC 0x3 version. + */ + if (gfrc.ver < 0x3) + return; + + raw_spin_lock_irqsave(&mcip_lock, flags); + + __mcip_cmd(CMD_GFRC_READ_CORE, 0); + gfrc_halt_mask = read_aux_reg(ARC_REG_MCIP_READBACK); + gfrc_halt_mask |= BIT(cpu); + __mcip_cmd_data(CMD_GFRC_SET_CORE, 0, gfrc_halt_mask); + + raw_spin_unlock_irqrestore(&mcip_lock, flags); +} + +static void mcip_update_debug_halt_mask(int cpu) +{ + u32 mcip_mask = 0; + unsigned long flags; + + raw_spin_lock_irqsave(&mcip_lock, flags); + + /* + * mcip_mask is same for CMD_DEBUG_SET_SELECT and CMD_DEBUG_SET_MASK + * commands. So read it once instead of reading both CMD_DEBUG_READ_MASK + * and CMD_DEBUG_READ_SELECT. + */ + __mcip_cmd(CMD_DEBUG_READ_SELECT, 0); + mcip_mask = read_aux_reg(ARC_REG_MCIP_READBACK); + + mcip_mask |= BIT(cpu); + + __mcip_cmd_data(CMD_DEBUG_SET_SELECT, 0, mcip_mask); + /* + * Parameter specified halt cause: + * STATUS32[H]/actionpoint/breakpoint/self-halt + * We choose all of them (0xF). + */ + __mcip_cmd_data(CMD_DEBUG_SET_MASK, 0xF, mcip_mask); + + raw_spin_unlock_irqrestore(&mcip_lock, flags); +} + +static void mcip_setup_per_cpu(int cpu) +{ + struct mcip_bcr mp; + + READ_BCR(ARC_REG_MCIP_BCR, mp); + + smp_ipi_irq_setup(cpu, IPI_IRQ); + smp_ipi_irq_setup(cpu, SOFTIRQ_IRQ); + + /* Update GFRC halt mask as new CPU came online */ + if (mp.gfrc) + mcip_update_gfrc_halt_mask(cpu); + + /* Update MCIP debug mask as new CPU came online */ + if (mp.dbg) + mcip_update_debug_halt_mask(cpu); +} + +static void mcip_ipi_send(int cpu) +{ + unsigned long flags; + int ipi_was_pending; + + /* ARConnect can only send IPI to others */ + if (unlikely(cpu == raw_smp_processor_id())) { + arc_softirq_trigger(SOFTIRQ_IRQ); + return; + } + + raw_spin_lock_irqsave(&mcip_lock, flags); + + /* + * If receiver already has a pending interrupt, elide sending this one. + * Linux cross core calling works well with concurrent IPIs + * coalesced into one + * see arch/arc/kernel/smp.c: ipi_send_msg_one() + */ + __mcip_cmd(CMD_INTRPT_READ_STATUS, cpu); + ipi_was_pending = read_aux_reg(ARC_REG_MCIP_READBACK); + if (!ipi_was_pending) + __mcip_cmd(CMD_INTRPT_GENERATE_IRQ, cpu); + + raw_spin_unlock_irqrestore(&mcip_lock, flags); +} + +static void mcip_ipi_clear(int irq) +{ + unsigned int cpu, c; + unsigned long flags; + + if (unlikely(irq == SOFTIRQ_IRQ)) { + arc_softirq_clear(irq); + return; + } + + raw_spin_lock_irqsave(&mcip_lock, flags); + + /* Who sent the IPI */ + __mcip_cmd(CMD_INTRPT_CHECK_SOURCE, 0); + + cpu = read_aux_reg(ARC_REG_MCIP_READBACK); /* 1,2,4,8... */ + + /* + * In rare case, multiple concurrent IPIs sent to same target can + * possibly be coalesced by MCIP into 1 asserted IRQ, so @cpus can be + * "vectored" (multiple bits sets) as opposed to typical single bit + */ + do { + c = __ffs(cpu); /* 0,1,2,3 */ + __mcip_cmd(CMD_INTRPT_GENERATE_ACK, c); + cpu &= ~(1U << c); + } while (cpu); + + raw_spin_unlock_irqrestore(&mcip_lock, flags); +} + +static void mcip_probe_n_setup(void) +{ + struct mcip_bcr mp; + + READ_BCR(ARC_REG_MCIP_BCR, mp); + + sprintf(smp_cpuinfo_buf, + "Extn [SMP]\t: ARConnect (v%d): %d cores with %s%s%s%s\n", + mp.ver, mp.num_cores, + IS_AVAIL1(mp.ipi, "IPI "), + IS_AVAIL1(mp.idu, "IDU "), + IS_AVAIL1(mp.dbg, "DEBUG "), + IS_AVAIL1(mp.gfrc, "GFRC")); +} + +struct plat_smp_ops plat_smp_ops = { + .info = smp_cpuinfo_buf, + .init_early_smp = mcip_probe_n_setup, + .init_per_cpu = mcip_setup_per_cpu, + .ipi_send = mcip_ipi_send, + .ipi_clear = mcip_ipi_clear, +}; + +#endif + +/*************************************************************************** + * ARCv2 Interrupt Distribution Unit (IDU) + * + * Connects external "COMMON" IRQs to core intc, providing: + * -dynamic routing (IRQ affinity) + * -load balancing (Round Robin interrupt distribution) + * -1:N distribution + * + * It physically resides in the MCIP hw block + */ + +#include <linux/irqchip.h> +#include <linux/of.h> +#include <linux/of_irq.h> + +/* + * Set the DEST for @cmn_irq to @cpu_mask (1 bit per core) + */ +static void idu_set_dest(unsigned int cmn_irq, unsigned int cpu_mask) +{ + __mcip_cmd_data(CMD_IDU_SET_DEST, cmn_irq, cpu_mask); +} + +static void idu_set_mode(unsigned int cmn_irq, bool set_lvl, unsigned int lvl, + bool set_distr, unsigned int distr) +{ + union { + unsigned int word; + struct { + unsigned int distr:2, pad:2, lvl:1, pad2:27; + }; + } data; + + data.word = __mcip_cmd_read(CMD_IDU_READ_MODE, cmn_irq); + if (set_distr) + data.distr = distr; + if (set_lvl) + data.lvl = lvl; + __mcip_cmd_data(CMD_IDU_SET_MODE, cmn_irq, data.word); +} + +static void idu_irq_mask_raw(irq_hw_number_t hwirq) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&mcip_lock, flags); + __mcip_cmd_data(CMD_IDU_SET_MASK, hwirq, 1); + raw_spin_unlock_irqrestore(&mcip_lock, flags); +} + +static void idu_irq_mask(struct irq_data *data) +{ + idu_irq_mask_raw(data->hwirq); +} + +static void idu_irq_unmask(struct irq_data *data) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&mcip_lock, flags); + __mcip_cmd_data(CMD_IDU_SET_MASK, data->hwirq, 0); + raw_spin_unlock_irqrestore(&mcip_lock, flags); +} + +static void idu_irq_ack(struct irq_data *data) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&mcip_lock, flags); + __mcip_cmd(CMD_IDU_ACK_CIRQ, data->hwirq); + raw_spin_unlock_irqrestore(&mcip_lock, flags); +} + +static void idu_irq_mask_ack(struct irq_data *data) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&mcip_lock, flags); + __mcip_cmd_data(CMD_IDU_SET_MASK, data->hwirq, 1); + __mcip_cmd(CMD_IDU_ACK_CIRQ, data->hwirq); + raw_spin_unlock_irqrestore(&mcip_lock, flags); +} + +static int +idu_irq_set_affinity(struct irq_data *data, const struct cpumask *cpumask, + bool force) +{ + unsigned long flags; + cpumask_t online; + unsigned int destination_bits; + unsigned int distribution_mode; + + /* errout if no online cpu per @cpumask */ + if (!cpumask_and(&online, cpumask, cpu_online_mask)) + return -EINVAL; + + raw_spin_lock_irqsave(&mcip_lock, flags); + + destination_bits = cpumask_bits(&online)[0]; + idu_set_dest(data->hwirq, destination_bits); + + if (ffs(destination_bits) == fls(destination_bits)) + distribution_mode = IDU_M_DISTRI_DEST; + else + distribution_mode = IDU_M_DISTRI_RR; + + idu_set_mode(data->hwirq, false, 0, true, distribution_mode); + + raw_spin_unlock_irqrestore(&mcip_lock, flags); + + return IRQ_SET_MASK_OK; +} + +static int idu_irq_set_type(struct irq_data *data, u32 type) +{ + unsigned long flags; + + /* + * ARCv2 IDU HW does not support inverse polarity, so these are the + * only interrupt types supported. + */ + if (type & ~(IRQ_TYPE_EDGE_RISING | IRQ_TYPE_LEVEL_HIGH)) + return -EINVAL; + + raw_spin_lock_irqsave(&mcip_lock, flags); + + idu_set_mode(data->hwirq, true, + type & IRQ_TYPE_EDGE_RISING ? IDU_M_TRIG_EDGE : + IDU_M_TRIG_LEVEL, + false, 0); + + raw_spin_unlock_irqrestore(&mcip_lock, flags); + + return 0; +} + +static void idu_irq_enable(struct irq_data *data) +{ + /* + * By default send all common interrupts to all available online CPUs. + * The affinity of common interrupts in IDU must be set manually since + * in some cases the kernel will not call irq_set_affinity() by itself: + * 1. When the kernel is not configured with support of SMP. + * 2. When the kernel is configured with support of SMP but upper + * interrupt controllers does not support setting of the affinity + * and cannot propagate it to IDU. + */ + idu_irq_set_affinity(data, cpu_online_mask, false); + idu_irq_unmask(data); +} + +static struct irq_chip idu_irq_chip = { + .name = "MCIP IDU Intc", + .irq_mask = idu_irq_mask, + .irq_unmask = idu_irq_unmask, + .irq_ack = idu_irq_ack, + .irq_mask_ack = idu_irq_mask_ack, + .irq_enable = idu_irq_enable, + .irq_set_type = idu_irq_set_type, +#ifdef CONFIG_SMP + .irq_set_affinity = idu_irq_set_affinity, +#endif + +}; + +static void idu_cascade_isr(struct irq_desc *desc) +{ + struct irq_domain *idu_domain = irq_desc_get_handler_data(desc); + struct irq_chip *core_chip = irq_desc_get_chip(desc); + irq_hw_number_t core_hwirq = irqd_to_hwirq(irq_desc_get_irq_data(desc)); + irq_hw_number_t idu_hwirq = core_hwirq - FIRST_EXT_IRQ; + + chained_irq_enter(core_chip, desc); + generic_handle_domain_irq(idu_domain, idu_hwirq); + chained_irq_exit(core_chip, desc); +} + +static int idu_irq_map(struct irq_domain *d, unsigned int virq, irq_hw_number_t hwirq) +{ + irq_set_chip_and_handler(virq, &idu_irq_chip, handle_level_irq); + irq_set_status_flags(virq, IRQ_MOVE_PCNTXT); + + return 0; +} + +static const struct irq_domain_ops idu_irq_ops = { + .xlate = irq_domain_xlate_onetwocell, + .map = idu_irq_map, +}; + +/* + * [16, 23]: Statically assigned always private-per-core (Timers, WDT, IPI) + * [24, 23+C]: If C > 0 then "C" common IRQs + * [24+C, N]: Not statically assigned, private-per-core + */ + + +static int __init +idu_of_init(struct device_node *intc, struct device_node *parent) +{ + struct irq_domain *domain; + int nr_irqs; + int i, virq; + struct mcip_bcr mp; + struct mcip_idu_bcr idu_bcr; + + READ_BCR(ARC_REG_MCIP_BCR, mp); + + if (!mp.idu) + panic("IDU not detected, but DeviceTree using it"); + + READ_BCR(ARC_REG_MCIP_IDU_BCR, idu_bcr); + nr_irqs = mcip_idu_bcr_to_nr_irqs(idu_bcr); + + pr_info("MCIP: IDU supports %u common irqs\n", nr_irqs); + + domain = irq_domain_add_linear(intc, nr_irqs, &idu_irq_ops, NULL); + + /* Parent interrupts (core-intc) are already mapped */ + + for (i = 0; i < nr_irqs; i++) { + /* Mask all common interrupts by default */ + idu_irq_mask_raw(i); + + /* + * Return parent uplink IRQs (towards core intc) 24,25,..... + * this step has been done before already + * however we need it to get the parent virq and set IDU handler + * as first level isr + */ + virq = irq_create_mapping(NULL, i + FIRST_EXT_IRQ); + BUG_ON(!virq); + irq_set_chained_handler_and_data(virq, idu_cascade_isr, domain); + } + + __mcip_cmd(CMD_IDU_ENABLE, 0); + + return 0; +} +IRQCHIP_DECLARE(arcv2_idu_intc, "snps,archs-idu-intc", idu_of_init); diff --git a/arch/arc/kernel/module.c b/arch/arc/kernel/module.c new file mode 100644 index 0000000000..c90c279047 --- /dev/null +++ b/arch/arc/kernel/module.c @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#include <linux/module.h> +#include <linux/moduleloader.h> +#include <linux/kernel.h> +#include <linux/elf.h> +#include <linux/vmalloc.h> +#include <linux/slab.h> +#include <linux/fs.h> +#include <linux/string.h> +#include <asm/unwind.h> + +static inline void arc_write_me(unsigned short *addr, unsigned long value) +{ + *addr = (value & 0xffff0000) >> 16; + *(addr + 1) = (value & 0xffff); +} + +/* + * This gets called before relocation loop in generic loader + * Make a note of the section index of unwinding section + */ +int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs, + char *secstr, struct module *mod) +{ +#ifdef CONFIG_ARC_DW2_UNWIND + mod->arch.unw_sec_idx = 0; + mod->arch.unw_info = NULL; +#endif + mod->arch.secstr = secstr; + return 0; +} + +void module_arch_cleanup(struct module *mod) +{ +#ifdef CONFIG_ARC_DW2_UNWIND + if (mod->arch.unw_info) + unwind_remove_table(mod->arch.unw_info, 0); +#endif +} + +int apply_relocate_add(Elf32_Shdr *sechdrs, + const char *strtab, + unsigned int symindex, /* sec index for sym tbl */ + unsigned int relsec, /* sec index for relo sec */ + struct module *module) +{ + int i, n, relo_type; + Elf32_Rela *rel_entry = (void *)sechdrs[relsec].sh_addr; + Elf32_Sym *sym_entry, *sym_sec; + Elf32_Addr relocation, location, tgt_addr; + unsigned int tgtsec; + + /* + * @relsec has relocations e.g. .rela.init.text + * @tgtsec is section to patch e.g. .init.text + */ + tgtsec = sechdrs[relsec].sh_info; + tgt_addr = sechdrs[tgtsec].sh_addr; + sym_sec = (Elf32_Sym *) sechdrs[symindex].sh_addr; + n = sechdrs[relsec].sh_size / sizeof(*rel_entry); + + pr_debug("\nSection to fixup %s @%x\n", + module->arch.secstr + sechdrs[tgtsec].sh_name, tgt_addr); + pr_debug("=========================================================\n"); + pr_debug("r_off\tr_add\tst_value ADDRESS VALUE\n"); + pr_debug("=========================================================\n"); + + /* Loop thru entries in relocation section */ + for (i = 0; i < n; i++) { + const char *s; + + /* This is where to make the change */ + location = tgt_addr + rel_entry[i].r_offset; + + /* This is the symbol it is referring to. Note that all + undefined symbols have been resolved. */ + sym_entry = sym_sec + ELF32_R_SYM(rel_entry[i].r_info); + + relocation = sym_entry->st_value + rel_entry[i].r_addend; + + if (sym_entry->st_name == 0 && ELF_ST_TYPE (sym_entry->st_info) == STT_SECTION) { + s = module->arch.secstr + sechdrs[sym_entry->st_shndx].sh_name; + } else { + s = strtab + sym_entry->st_name; + } + + pr_debug(" %x\t%x\t%x %x %x [%s]\n", + rel_entry[i].r_offset, rel_entry[i].r_addend, + sym_entry->st_value, location, relocation, s); + + /* This assumes modules are built with -mlong-calls + * so any branches/jumps are absolute 32 bit jmps + * global data access again is abs 32 bit. + * Both of these are handled by same relocation type + */ + relo_type = ELF32_R_TYPE(rel_entry[i].r_info); + + if (likely(R_ARC_32_ME == relo_type)) /* ME ( S + A ) */ + arc_write_me((unsigned short *)location, relocation); + else if (R_ARC_32 == relo_type) /* ( S + A ) */ + *((Elf32_Addr *) location) = relocation; + else if (R_ARC_32_PCREL == relo_type) /* ( S + A ) - PDATA ) */ + *((Elf32_Addr *) location) = relocation - location; + else + goto relo_err; + + } + +#ifdef CONFIG_ARC_DW2_UNWIND + if (strcmp(module->arch.secstr+sechdrs[tgtsec].sh_name, ".eh_frame") == 0) + module->arch.unw_sec_idx = tgtsec; +#endif + + return 0; + +relo_err: + pr_err("%s: unknown relocation: %u\n", + module->name, ELF32_R_TYPE(rel_entry[i].r_info)); + return -ENOEXEC; + +} + +/* Just before lift off: After sections have been relocated, we add the + * dwarf section to unwinder table pool + * This couldn't be done in module_frob_arch_sections() because + * relocations had not been applied by then + */ +int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs, + struct module *mod) +{ +#ifdef CONFIG_ARC_DW2_UNWIND + void *unw; + int unwsec = mod->arch.unw_sec_idx; + + if (unwsec) { + unw = unwind_add_table(mod, (void *)sechdrs[unwsec].sh_addr, + sechdrs[unwsec].sh_size); + mod->arch.unw_info = unw; + } +#endif + return 0; +} diff --git a/arch/arc/kernel/perf_event.c b/arch/arc/kernel/perf_event.c new file mode 100644 index 0000000000..adff957962 --- /dev/null +++ b/arch/arc/kernel/perf_event.c @@ -0,0 +1,850 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// Linux performance counter support for ARC CPUs. +// This code is inspired by the perf support of various other architectures. +// +// Copyright (C) 2013-2018 Synopsys, Inc. (www.synopsys.com) + +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/perf_event.h> +#include <linux/platform_device.h> +#include <asm/arcregs.h> +#include <asm/stacktrace.h> + +/* HW holds 8 symbols + one for null terminator */ +#define ARCPMU_EVENT_NAME_LEN 9 + +/* + * Some ARC pct quirks: + * + * PERF_COUNT_HW_STALLED_CYCLES_BACKEND + * PERF_COUNT_HW_STALLED_CYCLES_FRONTEND + * The ARC 700 can either measure stalls per pipeline stage, or all stalls + * combined; for now we assign all stalls to STALLED_CYCLES_BACKEND + * and all pipeline flushes (e.g. caused by mispredicts, etc.) to + * STALLED_CYCLES_FRONTEND. + * + * We could start multiple performance counters and combine everything + * afterwards, but that makes it complicated. + * + * Note that I$ cache misses aren't counted by either of the two! + */ + +/* + * ARC PCT has hardware conditions with fixed "names" but variable "indexes" + * (based on a specific RTL build) + * Below is the static map between perf generic/arc specific event_id and + * h/w condition names. + * At the time of probe, we loop thru each index and find it's name to + * complete the mapping of perf event_id to h/w index as latter is needed + * to program the counter really + */ +static const char * const arc_pmu_ev_hw_map[] = { + /* count cycles */ + [PERF_COUNT_HW_CPU_CYCLES] = "crun", + [PERF_COUNT_HW_REF_CPU_CYCLES] = "crun", + [PERF_COUNT_HW_BUS_CYCLES] = "crun", + + [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = "bflush", + [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = "bstall", + + /* counts condition */ + [PERF_COUNT_HW_INSTRUCTIONS] = "iall", + /* All jump instructions that are taken */ + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = "ijmptak", +#ifdef CONFIG_ISA_ARCV2 + [PERF_COUNT_HW_BRANCH_MISSES] = "bpmp", +#else + [PERF_COUNT_ARC_BPOK] = "bpok", /* NP-NT, PT-T, PNT-NT */ + [PERF_COUNT_HW_BRANCH_MISSES] = "bpfail", /* NP-T, PT-NT, PNT-T */ +#endif + [PERF_COUNT_ARC_LDC] = "imemrdc", /* Instr: mem read cached */ + [PERF_COUNT_ARC_STC] = "imemwrc", /* Instr: mem write cached */ + + [PERF_COUNT_ARC_DCLM] = "dclm", /* D-cache Load Miss */ + [PERF_COUNT_ARC_DCSM] = "dcsm", /* D-cache Store Miss */ + [PERF_COUNT_ARC_ICM] = "icm", /* I-cache Miss */ + [PERF_COUNT_ARC_EDTLB] = "edtlb", /* D-TLB Miss */ + [PERF_COUNT_ARC_EITLB] = "eitlb", /* I-TLB Miss */ + + [PERF_COUNT_HW_CACHE_REFERENCES] = "imemrdc", /* Instr: mem read cached */ + [PERF_COUNT_HW_CACHE_MISSES] = "dclm", /* D-cache Load Miss */ +}; + +#define C(_x) PERF_COUNT_HW_CACHE_##_x +#define CACHE_OP_UNSUPPORTED 0xffff + +static const unsigned int arc_pmu_cache_map[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { + [C(L1D)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = PERF_COUNT_ARC_LDC, + [C(RESULT_MISS)] = PERF_COUNT_ARC_DCLM, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = PERF_COUNT_ARC_STC, + [C(RESULT_MISS)] = PERF_COUNT_ARC_DCSM, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = PERF_COUNT_HW_INSTRUCTIONS, + [C(RESULT_MISS)] = PERF_COUNT_ARC_ICM, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(LL)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(DTLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = PERF_COUNT_ARC_LDC, + [C(RESULT_MISS)] = PERF_COUNT_ARC_EDTLB, + }, + /* DTLB LD/ST Miss not segregated by h/w*/ + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(ITLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = PERF_COUNT_ARC_EITLB, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(BPU)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = PERF_COUNT_HW_BRANCH_INSTRUCTIONS, + [C(RESULT_MISS)] = PERF_COUNT_HW_BRANCH_MISSES, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(NODE)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, +}; + +enum arc_pmu_attr_groups { + ARCPMU_ATTR_GR_EVENTS, + ARCPMU_ATTR_GR_FORMATS, + ARCPMU_NR_ATTR_GR +}; + +struct arc_pmu_raw_event_entry { + char name[ARCPMU_EVENT_NAME_LEN]; +}; + +struct arc_pmu { + struct pmu pmu; + unsigned int irq; + int n_counters; + int n_events; + u64 max_period; + int ev_hw_idx[PERF_COUNT_ARC_HW_MAX]; + + struct arc_pmu_raw_event_entry *raw_entry; + struct attribute **attrs; + struct perf_pmu_events_attr *attr; + const struct attribute_group *attr_groups[ARCPMU_NR_ATTR_GR + 1]; +}; + +struct arc_pmu_cpu { + /* + * A 1 bit for an index indicates that the counter is being used for + * an event. A 0 means that the counter can be used. + */ + unsigned long used_mask[BITS_TO_LONGS(ARC_PERF_MAX_COUNTERS)]; + + /* + * The events that are active on the PMU for the given index. + */ + struct perf_event *act_counter[ARC_PERF_MAX_COUNTERS]; +}; + +struct arc_callchain_trace { + int depth; + void *perf_stuff; +}; + +static int callchain_trace(unsigned int addr, void *data) +{ + struct arc_callchain_trace *ctrl = data; + struct perf_callchain_entry_ctx *entry = ctrl->perf_stuff; + + perf_callchain_store(entry, addr); + + if (ctrl->depth++ < 3) + return 0; + + return -1; +} + +void perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, + struct pt_regs *regs) +{ + struct arc_callchain_trace ctrl = { + .depth = 0, + .perf_stuff = entry, + }; + + arc_unwind_core(NULL, regs, callchain_trace, &ctrl); +} + +void perf_callchain_user(struct perf_callchain_entry_ctx *entry, + struct pt_regs *regs) +{ + /* + * User stack can't be unwound trivially with kernel dwarf unwinder + * So for now just record the user PC + */ + perf_callchain_store(entry, instruction_pointer(regs)); +} + +static struct arc_pmu *arc_pmu; +static DEFINE_PER_CPU(struct arc_pmu_cpu, arc_pmu_cpu); + +/* read counter #idx; note that counter# != event# on ARC! */ +static u64 arc_pmu_read_counter(int idx) +{ + u32 tmp; + u64 result; + + /* + * ARC supports making 'snapshots' of the counters, so we don't + * need to care about counters wrapping to 0 underneath our feet + */ + write_aux_reg(ARC_REG_PCT_INDEX, idx); + tmp = read_aux_reg(ARC_REG_PCT_CONTROL); + write_aux_reg(ARC_REG_PCT_CONTROL, tmp | ARC_REG_PCT_CONTROL_SN); + result = (u64) (read_aux_reg(ARC_REG_PCT_SNAPH)) << 32; + result |= read_aux_reg(ARC_REG_PCT_SNAPL); + + return result; +} + +static void arc_perf_event_update(struct perf_event *event, + struct hw_perf_event *hwc, int idx) +{ + u64 prev_raw_count = local64_read(&hwc->prev_count); + u64 new_raw_count = arc_pmu_read_counter(idx); + s64 delta = new_raw_count - prev_raw_count; + + /* + * We aren't afraid of hwc->prev_count changing beneath our feet + * because there's no way for us to re-enter this function anytime. + */ + local64_set(&hwc->prev_count, new_raw_count); + local64_add(delta, &event->count); + local64_sub(delta, &hwc->period_left); +} + +static void arc_pmu_read(struct perf_event *event) +{ + arc_perf_event_update(event, &event->hw, event->hw.idx); +} + +static int arc_pmu_cache_event(u64 config) +{ + unsigned int cache_type, cache_op, cache_result; + int ret; + + cache_type = (config >> 0) & 0xff; + cache_op = (config >> 8) & 0xff; + cache_result = (config >> 16) & 0xff; + if (cache_type >= PERF_COUNT_HW_CACHE_MAX) + return -EINVAL; + if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX) + return -EINVAL; + if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX) + return -EINVAL; + + ret = arc_pmu_cache_map[cache_type][cache_op][cache_result]; + + if (ret == CACHE_OP_UNSUPPORTED) + return -ENOENT; + + pr_debug("init cache event: type/op/result %d/%d/%d with h/w %d \'%s\'\n", + cache_type, cache_op, cache_result, ret, + arc_pmu_ev_hw_map[ret]); + + return ret; +} + +/* initializes hw_perf_event structure if event is supported */ +static int arc_pmu_event_init(struct perf_event *event) +{ + struct hw_perf_event *hwc = &event->hw; + int ret; + + if (!is_sampling_event(event)) { + hwc->sample_period = arc_pmu->max_period; + hwc->last_period = hwc->sample_period; + local64_set(&hwc->period_left, hwc->sample_period); + } + + hwc->config = 0; + + if (is_isa_arcv2()) { + /* "exclude user" means "count only kernel" */ + if (event->attr.exclude_user) + hwc->config |= ARC_REG_PCT_CONFIG_KERN; + + /* "exclude kernel" means "count only user" */ + if (event->attr.exclude_kernel) + hwc->config |= ARC_REG_PCT_CONFIG_USER; + } + + switch (event->attr.type) { + case PERF_TYPE_HARDWARE: + if (event->attr.config >= PERF_COUNT_HW_MAX) + return -ENOENT; + if (arc_pmu->ev_hw_idx[event->attr.config] < 0) + return -ENOENT; + hwc->config |= arc_pmu->ev_hw_idx[event->attr.config]; + pr_debug("init event %d with h/w %08x \'%s\'\n", + (int)event->attr.config, (int)hwc->config, + arc_pmu_ev_hw_map[event->attr.config]); + return 0; + + case PERF_TYPE_HW_CACHE: + ret = arc_pmu_cache_event(event->attr.config); + if (ret < 0) + return ret; + hwc->config |= arc_pmu->ev_hw_idx[ret]; + pr_debug("init cache event with h/w %08x \'%s\'\n", + (int)hwc->config, arc_pmu_ev_hw_map[ret]); + return 0; + + case PERF_TYPE_RAW: + if (event->attr.config >= arc_pmu->n_events) + return -ENOENT; + + hwc->config |= event->attr.config; + pr_debug("init raw event with idx %lld \'%s\'\n", + event->attr.config, + arc_pmu->raw_entry[event->attr.config].name); + + return 0; + + default: + return -ENOENT; + } +} + +/* starts all counters */ +static void arc_pmu_enable(struct pmu *pmu) +{ + u32 tmp; + tmp = read_aux_reg(ARC_REG_PCT_CONTROL); + write_aux_reg(ARC_REG_PCT_CONTROL, (tmp & 0xffff0000) | 0x1); +} + +/* stops all counters */ +static void arc_pmu_disable(struct pmu *pmu) +{ + u32 tmp; + tmp = read_aux_reg(ARC_REG_PCT_CONTROL); + write_aux_reg(ARC_REG_PCT_CONTROL, (tmp & 0xffff0000) | 0x0); +} + +static int arc_pmu_event_set_period(struct perf_event *event) +{ + struct hw_perf_event *hwc = &event->hw; + s64 left = local64_read(&hwc->period_left); + s64 period = hwc->sample_period; + int idx = hwc->idx; + int overflow = 0; + u64 value; + + if (unlikely(left <= -period)) { + /* left underflowed by more than period. */ + left = period; + local64_set(&hwc->period_left, left); + hwc->last_period = period; + overflow = 1; + } else if (unlikely(left <= 0)) { + /* left underflowed by less than period. */ + left += period; + local64_set(&hwc->period_left, left); + hwc->last_period = period; + overflow = 1; + } + + if (left > arc_pmu->max_period) + left = arc_pmu->max_period; + + value = arc_pmu->max_period - left; + local64_set(&hwc->prev_count, value); + + /* Select counter */ + write_aux_reg(ARC_REG_PCT_INDEX, idx); + + /* Write value */ + write_aux_reg(ARC_REG_PCT_COUNTL, lower_32_bits(value)); + write_aux_reg(ARC_REG_PCT_COUNTH, upper_32_bits(value)); + + perf_event_update_userpage(event); + + return overflow; +} + +/* + * Assigns hardware counter to hardware condition. + * Note that there is no separate start/stop mechanism; + * stopping is achieved by assigning the 'never' condition + */ +static void arc_pmu_start(struct perf_event *event, int flags) +{ + struct hw_perf_event *hwc = &event->hw; + int idx = hwc->idx; + + if (WARN_ON_ONCE(idx == -1)) + return; + + if (flags & PERF_EF_RELOAD) + WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE)); + + hwc->state = 0; + + arc_pmu_event_set_period(event); + + /* Enable interrupt for this counter */ + if (is_sampling_event(event)) + write_aux_reg(ARC_REG_PCT_INT_CTRL, + read_aux_reg(ARC_REG_PCT_INT_CTRL) | BIT(idx)); + + /* enable ARC pmu here */ + write_aux_reg(ARC_REG_PCT_INDEX, idx); /* counter # */ + write_aux_reg(ARC_REG_PCT_CONFIG, hwc->config); /* condition */ +} + +static void arc_pmu_stop(struct perf_event *event, int flags) +{ + struct hw_perf_event *hwc = &event->hw; + int idx = hwc->idx; + + /* Disable interrupt for this counter */ + if (is_sampling_event(event)) { + /* + * Reset interrupt flag by writing of 1. This is required + * to make sure pending interrupt was not left. + */ + write_aux_reg(ARC_REG_PCT_INT_ACT, BIT(idx)); + write_aux_reg(ARC_REG_PCT_INT_CTRL, + read_aux_reg(ARC_REG_PCT_INT_CTRL) & ~BIT(idx)); + } + + if (!(event->hw.state & PERF_HES_STOPPED)) { + /* stop hw counter here */ + write_aux_reg(ARC_REG_PCT_INDEX, idx); + + /* condition code #0 is always "never" */ + write_aux_reg(ARC_REG_PCT_CONFIG, 0); + + event->hw.state |= PERF_HES_STOPPED; + } + + if ((flags & PERF_EF_UPDATE) && + !(event->hw.state & PERF_HES_UPTODATE)) { + arc_perf_event_update(event, &event->hw, idx); + event->hw.state |= PERF_HES_UPTODATE; + } +} + +static void arc_pmu_del(struct perf_event *event, int flags) +{ + struct arc_pmu_cpu *pmu_cpu = this_cpu_ptr(&arc_pmu_cpu); + + arc_pmu_stop(event, PERF_EF_UPDATE); + __clear_bit(event->hw.idx, pmu_cpu->used_mask); + + pmu_cpu->act_counter[event->hw.idx] = 0; + + perf_event_update_userpage(event); +} + +/* allocate hardware counter and optionally start counting */ +static int arc_pmu_add(struct perf_event *event, int flags) +{ + struct arc_pmu_cpu *pmu_cpu = this_cpu_ptr(&arc_pmu_cpu); + struct hw_perf_event *hwc = &event->hw; + int idx; + + idx = ffz(pmu_cpu->used_mask[0]); + if (idx == arc_pmu->n_counters) + return -EAGAIN; + + __set_bit(idx, pmu_cpu->used_mask); + hwc->idx = idx; + + write_aux_reg(ARC_REG_PCT_INDEX, idx); + + pmu_cpu->act_counter[idx] = event; + + if (is_sampling_event(event)) { + /* Mimic full counter overflow as other arches do */ + write_aux_reg(ARC_REG_PCT_INT_CNTL, + lower_32_bits(arc_pmu->max_period)); + write_aux_reg(ARC_REG_PCT_INT_CNTH, + upper_32_bits(arc_pmu->max_period)); + } + + write_aux_reg(ARC_REG_PCT_CONFIG, 0); + write_aux_reg(ARC_REG_PCT_COUNTL, 0); + write_aux_reg(ARC_REG_PCT_COUNTH, 0); + local64_set(&hwc->prev_count, 0); + + hwc->state = PERF_HES_UPTODATE | PERF_HES_STOPPED; + if (flags & PERF_EF_START) + arc_pmu_start(event, PERF_EF_RELOAD); + + perf_event_update_userpage(event); + + return 0; +} + +#ifdef CONFIG_ISA_ARCV2 +static irqreturn_t arc_pmu_intr(int irq, void *dev) +{ + struct perf_sample_data data; + struct arc_pmu_cpu *pmu_cpu = this_cpu_ptr(&arc_pmu_cpu); + struct pt_regs *regs; + unsigned int active_ints; + int idx; + + arc_pmu_disable(&arc_pmu->pmu); + + active_ints = read_aux_reg(ARC_REG_PCT_INT_ACT); + if (!active_ints) + goto done; + + regs = get_irq_regs(); + + do { + struct perf_event *event; + struct hw_perf_event *hwc; + + idx = __ffs(active_ints); + + /* Reset interrupt flag by writing of 1 */ + write_aux_reg(ARC_REG_PCT_INT_ACT, BIT(idx)); + + /* + * On reset of "interrupt active" bit corresponding + * "interrupt enable" bit gets automatically reset as well. + * Now we need to re-enable interrupt for the counter. + */ + write_aux_reg(ARC_REG_PCT_INT_CTRL, + read_aux_reg(ARC_REG_PCT_INT_CTRL) | BIT(idx)); + + event = pmu_cpu->act_counter[idx]; + hwc = &event->hw; + + WARN_ON_ONCE(hwc->idx != idx); + + arc_perf_event_update(event, &event->hw, event->hw.idx); + perf_sample_data_init(&data, 0, hwc->last_period); + if (arc_pmu_event_set_period(event)) { + if (perf_event_overflow(event, &data, regs)) + arc_pmu_stop(event, 0); + } + + active_ints &= ~BIT(idx); + } while (active_ints); + +done: + arc_pmu_enable(&arc_pmu->pmu); + + return IRQ_HANDLED; +} +#else + +static irqreturn_t arc_pmu_intr(int irq, void *dev) +{ + return IRQ_NONE; +} + +#endif /* CONFIG_ISA_ARCV2 */ + +static void arc_cpu_pmu_irq_init(void *data) +{ + int irq = *(int *)data; + + enable_percpu_irq(irq, IRQ_TYPE_NONE); + + /* Clear all pending interrupt flags */ + write_aux_reg(ARC_REG_PCT_INT_ACT, 0xffffffff); +} + +/* Event field occupies the bottom 15 bits of our config field */ +PMU_FORMAT_ATTR(event, "config:0-14"); +static struct attribute *arc_pmu_format_attrs[] = { + &format_attr_event.attr, + NULL, +}; + +static struct attribute_group arc_pmu_format_attr_gr = { + .name = "format", + .attrs = arc_pmu_format_attrs, +}; + +static ssize_t arc_pmu_events_sysfs_show(struct device *dev, + struct device_attribute *attr, + char *page) +{ + struct perf_pmu_events_attr *pmu_attr; + + pmu_attr = container_of(attr, struct perf_pmu_events_attr, attr); + return sprintf(page, "event=0x%04llx\n", pmu_attr->id); +} + +/* + * We don't add attrs here as we don't have pre-defined list of perf events. + * We will generate and add attrs dynamically in probe() after we read HW + * configuration. + */ +static struct attribute_group arc_pmu_events_attr_gr = { + .name = "events", +}; + +static void arc_pmu_add_raw_event_attr(int j, char *str) +{ + memmove(arc_pmu->raw_entry[j].name, str, ARCPMU_EVENT_NAME_LEN - 1); + arc_pmu->attr[j].attr.attr.name = arc_pmu->raw_entry[j].name; + arc_pmu->attr[j].attr.attr.mode = VERIFY_OCTAL_PERMISSIONS(0444); + arc_pmu->attr[j].attr.show = arc_pmu_events_sysfs_show; + arc_pmu->attr[j].id = j; + arc_pmu->attrs[j] = &(arc_pmu->attr[j].attr.attr); +} + +static int arc_pmu_raw_alloc(struct device *dev) +{ + arc_pmu->attr = devm_kmalloc_array(dev, arc_pmu->n_events + 1, + sizeof(*arc_pmu->attr), GFP_KERNEL | __GFP_ZERO); + if (!arc_pmu->attr) + return -ENOMEM; + + arc_pmu->attrs = devm_kmalloc_array(dev, arc_pmu->n_events + 1, + sizeof(*arc_pmu->attrs), GFP_KERNEL | __GFP_ZERO); + if (!arc_pmu->attrs) + return -ENOMEM; + + arc_pmu->raw_entry = devm_kmalloc_array(dev, arc_pmu->n_events, + sizeof(*arc_pmu->raw_entry), GFP_KERNEL | __GFP_ZERO); + if (!arc_pmu->raw_entry) + return -ENOMEM; + + return 0; +} + +static inline bool event_in_hw_event_map(int i, char *name) +{ + if (!arc_pmu_ev_hw_map[i]) + return false; + + if (!strlen(arc_pmu_ev_hw_map[i])) + return false; + + if (strcmp(arc_pmu_ev_hw_map[i], name)) + return false; + + return true; +} + +static void arc_pmu_map_hw_event(int j, char *str) +{ + int i; + + /* See if HW condition has been mapped to a perf event_id */ + for (i = 0; i < ARRAY_SIZE(arc_pmu_ev_hw_map); i++) { + if (event_in_hw_event_map(i, str)) { + pr_debug("mapping perf event %2d to h/w event \'%8s\' (idx %d)\n", + i, str, j); + arc_pmu->ev_hw_idx[i] = j; + } + } +} + +static int arc_pmu_device_probe(struct platform_device *pdev) +{ + struct arc_reg_pct_build pct_bcr; + struct arc_reg_cc_build cc_bcr; + int i, has_interrupts, irq = -1; + int counter_size; /* in bits */ + + union cc_name { + struct { + u32 word0, word1; + char sentinel; + } indiv; + char str[ARCPMU_EVENT_NAME_LEN]; + } cc_name; + + + READ_BCR(ARC_REG_PCT_BUILD, pct_bcr); + if (!pct_bcr.v) { + pr_err("This core does not have performance counters!\n"); + return -ENODEV; + } + BUILD_BUG_ON(ARC_PERF_MAX_COUNTERS > 32); + if (WARN_ON(pct_bcr.c > ARC_PERF_MAX_COUNTERS)) + return -EINVAL; + + READ_BCR(ARC_REG_CC_BUILD, cc_bcr); + if (WARN(!cc_bcr.v, "Counters exist but No countable conditions?")) + return -EINVAL; + + arc_pmu = devm_kzalloc(&pdev->dev, sizeof(struct arc_pmu), GFP_KERNEL); + if (!arc_pmu) + return -ENOMEM; + + arc_pmu->n_events = cc_bcr.c; + + if (arc_pmu_raw_alloc(&pdev->dev)) + return -ENOMEM; + + has_interrupts = is_isa_arcv2() ? pct_bcr.i : 0; + + arc_pmu->n_counters = pct_bcr.c; + counter_size = 32 + (pct_bcr.s << 4); + + arc_pmu->max_period = (1ULL << counter_size) / 2 - 1ULL; + + pr_info("ARC perf\t: %d counters (%d bits), %d conditions%s\n", + arc_pmu->n_counters, counter_size, cc_bcr.c, + has_interrupts ? ", [overflow IRQ support]" : ""); + + cc_name.str[ARCPMU_EVENT_NAME_LEN - 1] = 0; + for (i = 0; i < PERF_COUNT_ARC_HW_MAX; i++) + arc_pmu->ev_hw_idx[i] = -1; + + /* loop thru all available h/w condition indexes */ + for (i = 0; i < cc_bcr.c; i++) { + write_aux_reg(ARC_REG_CC_INDEX, i); + cc_name.indiv.word0 = le32_to_cpu(read_aux_reg(ARC_REG_CC_NAME0)); + cc_name.indiv.word1 = le32_to_cpu(read_aux_reg(ARC_REG_CC_NAME1)); + + arc_pmu_map_hw_event(i, cc_name.str); + arc_pmu_add_raw_event_attr(i, cc_name.str); + } + + arc_pmu_events_attr_gr.attrs = arc_pmu->attrs; + arc_pmu->attr_groups[ARCPMU_ATTR_GR_EVENTS] = &arc_pmu_events_attr_gr; + arc_pmu->attr_groups[ARCPMU_ATTR_GR_FORMATS] = &arc_pmu_format_attr_gr; + + arc_pmu->pmu = (struct pmu) { + .pmu_enable = arc_pmu_enable, + .pmu_disable = arc_pmu_disable, + .event_init = arc_pmu_event_init, + .add = arc_pmu_add, + .del = arc_pmu_del, + .start = arc_pmu_start, + .stop = arc_pmu_stop, + .read = arc_pmu_read, + .attr_groups = arc_pmu->attr_groups, + }; + + if (has_interrupts) { + irq = platform_get_irq(pdev, 0); + if (irq >= 0) { + int ret; + + arc_pmu->irq = irq; + + /* intc map function ensures irq_set_percpu_devid() called */ + ret = request_percpu_irq(irq, arc_pmu_intr, "ARC perf counters", + this_cpu_ptr(&arc_pmu_cpu)); + + if (!ret) + on_each_cpu(arc_cpu_pmu_irq_init, &irq, 1); + else + irq = -1; + } + + } + + if (irq == -1) + arc_pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT; + + /* + * perf parser doesn't really like '-' symbol in events name, so let's + * use '_' in arc pct name as it goes to kernel PMU event prefix. + */ + return perf_pmu_register(&arc_pmu->pmu, "arc_pct", PERF_TYPE_RAW); +} + +static const struct of_device_id arc_pmu_match[] = { + { .compatible = "snps,arc700-pct" }, + { .compatible = "snps,archs-pct" }, + {}, +}; +MODULE_DEVICE_TABLE(of, arc_pmu_match); + +static struct platform_driver arc_pmu_driver = { + .driver = { + .name = "arc-pct", + .of_match_table = of_match_ptr(arc_pmu_match), + }, + .probe = arc_pmu_device_probe, +}; + +module_platform_driver(arc_pmu_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mischa Jonker <mjonker@synopsys.com>"); +MODULE_DESCRIPTION("ARC PMU driver"); diff --git a/arch/arc/kernel/process.c b/arch/arc/kernel/process.c new file mode 100644 index 0000000000..186ceab661 --- /dev/null +++ b/arch/arc/kernel/process.c @@ -0,0 +1,296 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * Amit Bhor, Kanika Nema: Codito Technologies 2004 + */ + +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/sched/task.h> +#include <linux/sched/task_stack.h> + +#include <linux/mm.h> +#include <linux/fs.h> +#include <linux/unistd.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/syscalls.h> +#include <linux/elf.h> +#include <linux/tick.h> + +#include <asm/fpu.h> + +SYSCALL_DEFINE1(arc_settls, void *, user_tls_data_ptr) +{ + task_thread_info(current)->thr_ptr = (unsigned int)user_tls_data_ptr; + return 0; +} + +/* + * We return the user space TLS data ptr as sys-call return code + * Ideally it should be copy to user. + * However we can cheat by the fact that some sys-calls do return + * absurdly high values + * Since the tls dat aptr is not going to be in range of 0xFFFF_xxxx + * it won't be considered a sys-call error + * and it will be loads better than copy-to-user, which is a definite + * D-TLB Miss + */ +SYSCALL_DEFINE0(arc_gettls) +{ + return task_thread_info(current)->thr_ptr; +} + +SYSCALL_DEFINE3(arc_usr_cmpxchg, int __user *, uaddr, int, expected, int, new) +{ + struct pt_regs *regs = current_pt_regs(); + u32 uval; + int ret; + + /* + * This is only for old cores lacking LLOCK/SCOND, which by definition + * can't possibly be SMP. Thus doesn't need to be SMP safe. + * And this also helps reduce the overhead for serializing in + * the UP case + */ + WARN_ON_ONCE(IS_ENABLED(CONFIG_SMP)); + + /* Z indicates to userspace if operation succeeded */ + regs->status32 &= ~STATUS_Z_MASK; + + ret = access_ok(uaddr, sizeof(*uaddr)); + if (!ret) + goto fail; + +again: + preempt_disable(); + + ret = __get_user(uval, uaddr); + if (ret) + goto fault; + + if (uval != expected) + goto out; + + ret = __put_user(new, uaddr); + if (ret) + goto fault; + + regs->status32 |= STATUS_Z_MASK; + +out: + preempt_enable(); + return uval; + +fault: + preempt_enable(); + + if (unlikely(ret != -EFAULT)) + goto fail; + + mmap_read_lock(current->mm); + ret = fixup_user_fault(current->mm, (unsigned long) uaddr, + FAULT_FLAG_WRITE, NULL); + mmap_read_unlock(current->mm); + + if (likely(!ret)) + goto again; + +fail: + force_sig(SIGSEGV); + return ret; +} + +#ifdef CONFIG_ISA_ARCV2 + +void arch_cpu_idle(void) +{ + /* Re-enable interrupts <= default irq priority before committing SLEEP */ + const unsigned int arg = 0x10 | ARCV2_IRQ_DEF_PRIO; + + __asm__ __volatile__( + "sleep %0 \n" + : + :"I"(arg)); /* can't be "r" has to be embedded const */ + + raw_local_irq_disable(); +} + +#else /* ARC700 */ + +void arch_cpu_idle(void) +{ + /* sleep, but enable both set E1/E2 (levels of interrupts) before committing */ + __asm__ __volatile__("sleep 0x3 \n"); + raw_local_irq_disable(); +} + +#endif + +asmlinkage void ret_from_fork(void); + +/* + * Copy architecture-specific thread state + * + * Layout of Child kernel mode stack as setup at the end of this function is + * + * | ... | + * | ... | + * | unused | + * | | + * ------------------ + * | r25 | <==== top of Stack (thread_info.ksp) + * ~ ~ + * | --to-- | (CALLEE Regs of kernel mode) + * | r13 | + * ------------------ + * | fp | + * | blink | @ret_from_fork + * ------------------ + * | | + * ~ ~ + * ~ ~ + * | | + * ------------------ + * | r12 | + * ~ ~ + * | --to-- | (scratch Regs of user mode) + * | r0 | + * ------------------ + * | SP | + * | orig_r0 | + * | event/ECR | + * ------------------ <===== END of PAGE + */ +int copy_thread(struct task_struct *p, const struct kernel_clone_args *args) +{ + unsigned long clone_flags = args->flags; + unsigned long usp = args->stack; + unsigned long tls = args->tls; + struct pt_regs *c_regs; /* child's pt_regs */ + unsigned long *childksp; /* to unwind out of __switch_to() */ + struct callee_regs *c_callee; /* child's callee regs */ + struct callee_regs *parent_callee; /* paren't callee */ + struct pt_regs *regs = current_pt_regs(); + + /* Mark the specific anchors to begin with (see pic above) */ + c_regs = task_pt_regs(p); + childksp = (unsigned long *)c_regs - 2; /* 2 words for FP/BLINK */ + c_callee = ((struct callee_regs *)childksp) - 1; + + /* + * __switch_to() uses thread_info.ksp to start unwinding stack + * For kernel threads we don't need to create callee regs, the + * stack layout nevertheless needs to remain the same. + * Also, since __switch_to anyways unwinds callee regs, we use + * this to populate kernel thread entry-pt/args into callee regs, + * so that ret_from_kernel_thread() becomes simpler. + */ + task_thread_info(p)->ksp = (unsigned long)c_callee; /* THREAD_INFO_KSP */ + + /* __switch_to expects FP(0), BLINK(return addr) at top */ + childksp[0] = 0; /* fp */ + childksp[1] = (unsigned long)ret_from_fork; /* blink */ + + if (unlikely(args->fn)) { + memset(c_regs, 0, sizeof(struct pt_regs)); + + c_callee->r13 = (unsigned long)args->fn_arg; + c_callee->r14 = (unsigned long)args->fn; + + return 0; + } + + /*--------- User Task Only --------------*/ + + /* __switch_to expects FP(0), BLINK(return addr) at top of stack */ + childksp[0] = 0; /* for POP fp */ + childksp[1] = (unsigned long)ret_from_fork; /* for POP blink */ + + /* Copy parents pt regs on child's kernel mode stack */ + *c_regs = *regs; + + if (usp) + c_regs->sp = usp; + + c_regs->r0 = 0; /* fork returns 0 in child */ + + parent_callee = ((struct callee_regs *)regs) - 1; + *c_callee = *parent_callee; + + if (unlikely(clone_flags & CLONE_SETTLS)) { + /* + * set task's userland tls data ptr from 4th arg + * clone C-lib call is difft from clone sys-call + */ + task_thread_info(p)->thr_ptr = tls; + } else { + /* Normal fork case: set parent's TLS ptr in child */ + task_thread_info(p)->thr_ptr = + task_thread_info(current)->thr_ptr; + } + + + /* + * setup usermode thread pointer #1: + * when child is picked by scheduler, __switch_to() uses @c_callee to + * populate usermode callee regs: this works (despite being in a kernel + * function) since special return path for child @ret_from_fork() + * ensures those regs are not clobbered all the way to RTIE to usermode + */ + c_callee->r25 = task_thread_info(p)->thr_ptr; + + return 0; +} + +/* + * Do necessary setup to start up a new user task + */ +void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp) +{ + regs->sp = usp; + regs->ret = pc; + + /* + * [U]ser Mode bit set + * [L] ZOL loop inhibited to begin with - cleared by a LP insn + * Interrupts enabled + */ + regs->status32 = STATUS_U_MASK | STATUS_L_MASK | ISA_INIT_STATUS_BITS; + + fpu_init_task(regs); + + /* bogus seed values for debugging */ + regs->lp_start = 0x10; + regs->lp_end = 0x80; +} + +/* + * Some archs flush debug and FPU info here + */ +void flush_thread(void) +{ +} + +int elf_check_arch(const struct elf32_hdr *x) +{ + unsigned int eflags; + + if (x->e_machine != EM_ARC_INUSE) { + pr_err("ELF not built for %s ISA\n", + is_isa_arcompact() ? "ARCompact":"ARCv2"); + return 0; + } + + eflags = x->e_flags; + if ((eflags & EF_ARC_OSABI_MSK) != EF_ARC_OSABI_CURRENT) { + pr_err("ABI mismatch - you need newer toolchain\n"); + force_fatal_sig(SIGSEGV); + return 0; + } + + return 1; +} +EXPORT_SYMBOL(elf_check_arch); diff --git a/arch/arc/kernel/ptrace.c b/arch/arc/kernel/ptrace.c new file mode 100644 index 0000000000..e0c233c178 --- /dev/null +++ b/arch/arc/kernel/ptrace.c @@ -0,0 +1,401 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#include <linux/ptrace.h> +#include <linux/sched/task_stack.h> +#include <linux/regset.h> +#include <linux/unistd.h> +#include <linux/elf.h> + +#define CREATE_TRACE_POINTS +#include <trace/events/syscalls.h> + +struct pt_regs_offset { + const char *name; + int offset; +}; + +#define REG_OFFSET_NAME(r) {.name = #r, .offset = offsetof(struct pt_regs, r)} +#define REG_OFFSET_END {.name = NULL, .offset = 0} + +#ifdef CONFIG_ISA_ARCOMPACT +static const struct pt_regs_offset regoffset_table[] = { + REG_OFFSET_NAME(bta), + REG_OFFSET_NAME(lp_start), + REG_OFFSET_NAME(lp_end), + REG_OFFSET_NAME(lp_count), + REG_OFFSET_NAME(status32), + REG_OFFSET_NAME(ret), + REG_OFFSET_NAME(blink), + REG_OFFSET_NAME(fp), + REG_OFFSET_NAME(r26), + REG_OFFSET_NAME(r12), + REG_OFFSET_NAME(r11), + REG_OFFSET_NAME(r10), + REG_OFFSET_NAME(r9), + REG_OFFSET_NAME(r8), + REG_OFFSET_NAME(r7), + REG_OFFSET_NAME(r6), + REG_OFFSET_NAME(r5), + REG_OFFSET_NAME(r4), + REG_OFFSET_NAME(r3), + REG_OFFSET_NAME(r2), + REG_OFFSET_NAME(r1), + REG_OFFSET_NAME(r0), + REG_OFFSET_NAME(sp), + REG_OFFSET_NAME(orig_r0), + REG_OFFSET_NAME(ecr), + REG_OFFSET_END, +}; + +#else + +static const struct pt_regs_offset regoffset_table[] = { + REG_OFFSET_NAME(orig_r0), + REG_OFFSET_NAME(ecr), + REG_OFFSET_NAME(bta), + REG_OFFSET_NAME(r26), + REG_OFFSET_NAME(fp), + REG_OFFSET_NAME(sp), + REG_OFFSET_NAME(r12), + REG_OFFSET_NAME(r30), +#ifdef CONFIG_ARC_HAS_ACCL_REGS + REG_OFFSET_NAME(r58), + REG_OFFSET_NAME(r59), +#endif +#ifdef CONFIG_ARC_DSP_SAVE_RESTORE_REGS + REG_OFFSET_NAME(DSP_CTRL), +#endif + REG_OFFSET_NAME(r0), + REG_OFFSET_NAME(r1), + REG_OFFSET_NAME(r2), + REG_OFFSET_NAME(r3), + REG_OFFSET_NAME(r4), + REG_OFFSET_NAME(r5), + REG_OFFSET_NAME(r6), + REG_OFFSET_NAME(r7), + REG_OFFSET_NAME(r8), + REG_OFFSET_NAME(r9), + REG_OFFSET_NAME(r10), + REG_OFFSET_NAME(r11), + REG_OFFSET_NAME(blink), + REG_OFFSET_NAME(lp_end), + REG_OFFSET_NAME(lp_start), + REG_OFFSET_NAME(lp_count), + REG_OFFSET_NAME(ei), + REG_OFFSET_NAME(ldi), + REG_OFFSET_NAME(jli), + REG_OFFSET_NAME(ret), + REG_OFFSET_NAME(status32), + REG_OFFSET_END, +}; +#endif + +static struct callee_regs *task_callee_regs(struct task_struct *tsk) +{ + struct callee_regs *tmp = (struct callee_regs *)tsk->thread.callee_reg; + return tmp; +} + +static int genregs_get(struct task_struct *target, + const struct user_regset *regset, + struct membuf to) +{ + const struct pt_regs *ptregs = task_pt_regs(target); + const struct callee_regs *cregs = task_callee_regs(target); + unsigned int stop_pc_val; + + membuf_zero(&to, 4); // pad + membuf_store(&to, ptregs->bta); + membuf_store(&to, ptregs->lp_start); + membuf_store(&to, ptregs->lp_end); + membuf_store(&to, ptregs->lp_count); + membuf_store(&to, ptregs->status32); + membuf_store(&to, ptregs->ret); + membuf_store(&to, ptregs->blink); + membuf_store(&to, ptregs->fp); + membuf_store(&to, ptregs->r26); // gp + membuf_store(&to, ptregs->r12); + membuf_store(&to, ptregs->r11); + membuf_store(&to, ptregs->r10); + membuf_store(&to, ptregs->r9); + membuf_store(&to, ptregs->r8); + membuf_store(&to, ptregs->r7); + membuf_store(&to, ptregs->r6); + membuf_store(&to, ptregs->r5); + membuf_store(&to, ptregs->r4); + membuf_store(&to, ptregs->r3); + membuf_store(&to, ptregs->r2); + membuf_store(&to, ptregs->r1); + membuf_store(&to, ptregs->r0); + membuf_store(&to, ptregs->sp); + membuf_zero(&to, 4); // pad2 + membuf_store(&to, cregs->r25); + membuf_store(&to, cregs->r24); + membuf_store(&to, cregs->r23); + membuf_store(&to, cregs->r22); + membuf_store(&to, cregs->r21); + membuf_store(&to, cregs->r20); + membuf_store(&to, cregs->r19); + membuf_store(&to, cregs->r18); + membuf_store(&to, cregs->r17); + membuf_store(&to, cregs->r16); + membuf_store(&to, cregs->r15); + membuf_store(&to, cregs->r14); + membuf_store(&to, cregs->r13); + membuf_store(&to, target->thread.fault_address); // efa + + if (in_brkpt_trap(ptregs)) { + stop_pc_val = target->thread.fault_address; + pr_debug("\t\tstop_pc (brk-pt)\n"); + } else { + stop_pc_val = ptregs->ret; + pr_debug("\t\tstop_pc (others)\n"); + } + + return membuf_store(&to, stop_pc_val); // stop_pc +} + +static int genregs_set(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + const void *kbuf, const void __user *ubuf) +{ + const struct pt_regs *ptregs = task_pt_regs(target); + const struct callee_regs *cregs = task_callee_regs(target); + int ret = 0; + +#define REG_IN_CHUNK(FIRST, NEXT, PTR) \ + if (!ret) \ + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, \ + (void *)(PTR), \ + offsetof(struct user_regs_struct, FIRST), \ + offsetof(struct user_regs_struct, NEXT)); + +#define REG_IN_ONE(LOC, PTR) \ + if (!ret) \ + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, \ + (void *)(PTR), \ + offsetof(struct user_regs_struct, LOC), \ + offsetof(struct user_regs_struct, LOC) + 4); + +#define REG_IGNORE_ONE(LOC) \ + if (!ret) \ + user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, \ + offsetof(struct user_regs_struct, LOC), \ + offsetof(struct user_regs_struct, LOC) + 4); + + REG_IGNORE_ONE(pad); + + REG_IN_ONE(scratch.bta, &ptregs->bta); + REG_IN_ONE(scratch.lp_start, &ptregs->lp_start); + REG_IN_ONE(scratch.lp_end, &ptregs->lp_end); + REG_IN_ONE(scratch.lp_count, &ptregs->lp_count); + + REG_IGNORE_ONE(scratch.status32); + + REG_IN_ONE(scratch.ret, &ptregs->ret); + REG_IN_ONE(scratch.blink, &ptregs->blink); + REG_IN_ONE(scratch.fp, &ptregs->fp); + REG_IN_ONE(scratch.gp, &ptregs->r26); + REG_IN_ONE(scratch.r12, &ptregs->r12); + REG_IN_ONE(scratch.r11, &ptregs->r11); + REG_IN_ONE(scratch.r10, &ptregs->r10); + REG_IN_ONE(scratch.r9, &ptregs->r9); + REG_IN_ONE(scratch.r8, &ptregs->r8); + REG_IN_ONE(scratch.r7, &ptregs->r7); + REG_IN_ONE(scratch.r6, &ptregs->r6); + REG_IN_ONE(scratch.r5, &ptregs->r5); + REG_IN_ONE(scratch.r4, &ptregs->r4); + REG_IN_ONE(scratch.r3, &ptregs->r3); + REG_IN_ONE(scratch.r2, &ptregs->r2); + REG_IN_ONE(scratch.r1, &ptregs->r1); + REG_IN_ONE(scratch.r0, &ptregs->r0); + REG_IN_ONE(scratch.sp, &ptregs->sp); + + REG_IGNORE_ONE(pad2); + + REG_IN_ONE(callee.r25, &cregs->r25); + REG_IN_ONE(callee.r24, &cregs->r24); + REG_IN_ONE(callee.r23, &cregs->r23); + REG_IN_ONE(callee.r22, &cregs->r22); + REG_IN_ONE(callee.r21, &cregs->r21); + REG_IN_ONE(callee.r20, &cregs->r20); + REG_IN_ONE(callee.r19, &cregs->r19); + REG_IN_ONE(callee.r18, &cregs->r18); + REG_IN_ONE(callee.r17, &cregs->r17); + REG_IN_ONE(callee.r16, &cregs->r16); + REG_IN_ONE(callee.r15, &cregs->r15); + REG_IN_ONE(callee.r14, &cregs->r14); + REG_IN_ONE(callee.r13, &cregs->r13); + + REG_IGNORE_ONE(efa); /* efa update invalid */ + REG_IGNORE_ONE(stop_pc); /* PC updated via @ret */ + + return ret; +} + +#ifdef CONFIG_ISA_ARCV2 +static int arcv2regs_get(struct task_struct *target, + const struct user_regset *regset, + struct membuf to) +{ + const struct pt_regs *regs = task_pt_regs(target); + + if (IS_ENABLED(CONFIG_ARC_HAS_ACCL_REGS)) + /* + * itemized copy not needed like above as layout of regs (r30,r58,r59) + * is exactly same in kernel (pt_regs) and userspace (user_regs_arcv2) + */ + return membuf_write(&to, ®s->r30, sizeof(struct user_regs_arcv2)); + + + membuf_write(&to, ®s->r30, 4); /* r30 only */ + return membuf_zero(&to, sizeof(struct user_regs_arcv2) - 4); +} + +static int arcv2regs_set(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + const void *kbuf, const void __user *ubuf) +{ + const struct pt_regs *regs = task_pt_regs(target); + int ret, copy_sz; + + if (IS_ENABLED(CONFIG_ARC_HAS_ACCL_REGS)) + copy_sz = sizeof(struct user_regs_arcv2); + else + copy_sz = 4; /* r30 only */ + + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, (void *)®s->r30, + 0, copy_sz); + + return ret; +} + +#endif + +enum arc_getset { + REGSET_CMN, + REGSET_ARCV2, +}; + +static const struct user_regset arc_regsets[] = { + [REGSET_CMN] = { + .core_note_type = NT_PRSTATUS, + .n = ELF_NGREG, + .size = sizeof(unsigned long), + .align = sizeof(unsigned long), + .regset_get = genregs_get, + .set = genregs_set, + }, +#ifdef CONFIG_ISA_ARCV2 + [REGSET_ARCV2] = { + .core_note_type = NT_ARC_V2, + .n = ELF_ARCV2REG, + .size = sizeof(unsigned long), + .align = sizeof(unsigned long), + .regset_get = arcv2regs_get, + .set = arcv2regs_set, + }, +#endif +}; + +static const struct user_regset_view user_arc_view = { + .name = "arc", + .e_machine = EM_ARC_INUSE, + .regsets = arc_regsets, + .n = ARRAY_SIZE(arc_regsets) +}; + +const struct user_regset_view *task_user_regset_view(struct task_struct *task) +{ + return &user_arc_view; +} + +void ptrace_disable(struct task_struct *child) +{ +} + +long arch_ptrace(struct task_struct *child, long request, + unsigned long addr, unsigned long data) +{ + int ret = -EIO; + + pr_debug("REQ=%ld: ADDR =0x%lx, DATA=0x%lx)\n", request, addr, data); + + switch (request) { + case PTRACE_GET_THREAD_AREA: + ret = put_user(task_thread_info(child)->thr_ptr, + (unsigned long __user *)data); + break; + default: + ret = ptrace_request(child, request, addr, data); + break; + } + + return ret; +} + +asmlinkage int syscall_trace_enter(struct pt_regs *regs) +{ + if (test_thread_flag(TIF_SYSCALL_TRACE)) + if (ptrace_report_syscall_entry(regs)) + return ULONG_MAX; + +#ifdef CONFIG_HAVE_SYSCALL_TRACEPOINTS + if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) + trace_sys_enter(regs, syscall_get_nr(current, regs)); +#endif + + return regs->r8; +} + +asmlinkage void syscall_trace_exit(struct pt_regs *regs) +{ + if (test_thread_flag(TIF_SYSCALL_TRACE)) + ptrace_report_syscall_exit(regs, 0); + +#ifdef CONFIG_HAVE_SYSCALL_TRACEPOINTS + if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) + trace_sys_exit(regs, regs_return_value(regs)); +#endif +} + +int regs_query_register_offset(const char *name) +{ + const struct pt_regs_offset *roff; + + for (roff = regoffset_table; roff->name != NULL; roff++) + if (!strcmp(roff->name, name)) + return roff->offset; + return -EINVAL; +} + +const char *regs_query_register_name(unsigned int offset) +{ + const struct pt_regs_offset *roff; + for (roff = regoffset_table; roff->name != NULL; roff++) + if (roff->offset == offset) + return roff->name; + return NULL; +} + +bool regs_within_kernel_stack(struct pt_regs *regs, unsigned long addr) +{ + return (addr & ~(THREAD_SIZE - 1)) == + (kernel_stack_pointer(regs) & ~(THREAD_SIZE - 1)); +} + +unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs, unsigned int n) +{ + unsigned long *addr = (unsigned long *)kernel_stack_pointer(regs); + + addr += n; + if (regs_within_kernel_stack(regs, (unsigned long)addr)) + return *addr; + else + return 0; +} diff --git a/arch/arc/kernel/reset.c b/arch/arc/kernel/reset.c new file mode 100644 index 0000000000..fd6c3eb930 --- /dev/null +++ b/arch/arc/kernel/reset.c @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#include <linux/kernel.h> +#include <linux/printk.h> +#include <linux/reboot.h> +#include <linux/pm.h> + +void machine_halt(void) +{ + /* Halt the processor */ + __asm__ __volatile__("flag 1\n"); +} + +void machine_restart(char *__unused) +{ + /* Soft reset : jump to reset vector */ + pr_info("Put your restart handler here\n"); + machine_halt(); +} + +void machine_power_off(void) +{ + /* FIXME :: power off ??? */ + machine_halt(); +} + +void (*pm_power_off) (void) = NULL; +EXPORT_SYMBOL(pm_power_off); diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c new file mode 100644 index 0000000000..d08a5092c2 --- /dev/null +++ b/arch/arc/kernel/setup.c @@ -0,0 +1,654 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#include <linux/seq_file.h> +#include <linux/fs.h> +#include <linux/delay.h> +#include <linux/root_dev.h> +#include <linux/clk.h> +#include <linux/clocksource.h> +#include <linux/console.h> +#include <linux/module.h> +#include <linux/sizes.h> +#include <linux/cpu.h> +#include <linux/of_clk.h> +#include <linux/of_fdt.h> +#include <linux/of.h> +#include <linux/cache.h> +#include <uapi/linux/mount.h> +#include <asm/sections.h> +#include <asm/arcregs.h> +#include <asm/asserts.h> +#include <asm/tlb.h> +#include <asm/setup.h> +#include <asm/page.h> +#include <asm/irq.h> +#include <asm/unwind.h> +#include <asm/mach_desc.h> +#include <asm/smp.h> +#include <asm/dsp-impl.h> +#include <soc/arc/mcip.h> + +#define FIX_PTR(x) __asm__ __volatile__(";" : "+r"(x)) + +unsigned int intr_to_DE_cnt; + +/* Part of U-boot ABI: see head.S */ +int __initdata uboot_tag; +int __initdata uboot_magic; +char __initdata *uboot_arg; + +const struct machine_desc *machine_desc; + +struct task_struct *_current_task[NR_CPUS]; /* For stack switching */ + +struct cpuinfo_arc { + int arcver; + unsigned int t0:1, t1:1; + struct { + unsigned long base; + unsigned int sz; + } iccm, dccm; +}; + +#ifdef CONFIG_ISA_ARCV2 + +static const struct id_to_str arc_hs_rel[] = { + /* ID.ARCVER, Release */ + { 0x51, "R2.0" }, + { 0x52, "R2.1" }, + { 0x53, "R3.0" }, +}; + +static const struct id_to_str arc_hs_ver54_rel[] = { + /* UARCH.MAJOR, Release */ + { 0, "R3.10a"}, + { 1, "R3.50a"}, + { 2, "R3.60a"}, + { 3, "R4.00a"}, + { 0xFF, NULL } +}; +#endif + +static int +arcompact_mumbojumbo(int c, struct cpuinfo_arc *info, char *buf, int len) +{ + int n = 0; +#ifdef CONFIG_ISA_ARCOMPACT + char *cpu_nm, *isa_nm = "ARCompact"; + struct bcr_fp_arcompact fpu_sp, fpu_dp; + int atomic = 0, be, present; + int bpu_full, bpu_cache, bpu_pred; + struct bcr_bpu_arcompact bpu; + struct bcr_iccm_arcompact iccm; + struct bcr_dccm_arcompact dccm; + struct bcr_generic isa; + + READ_BCR(ARC_REG_ISA_CFG_BCR, isa); + + if (!isa.ver) /* ISA BCR absent, use Kconfig info */ + atomic = IS_ENABLED(CONFIG_ARC_HAS_LLSC); + else { + /* ARC700_BUILD only has 2 bits of isa info */ + atomic = isa.info & 1; + } + + be = IS_ENABLED(CONFIG_CPU_BIG_ENDIAN); + + if (info->arcver < 0x34) + cpu_nm = "ARC750"; + else + cpu_nm = "ARC770"; + + n += scnprintf(buf + n, len - n, "processor [%d]\t: %s (%s ISA) %s%s%s\n", + c, cpu_nm, isa_nm, + IS_AVAIL2(atomic, "atomic ", CONFIG_ARC_HAS_LLSC), + IS_AVAIL1(be, "[Big-Endian]")); + + READ_BCR(ARC_REG_FP_BCR, fpu_sp); + READ_BCR(ARC_REG_DPFP_BCR, fpu_dp); + + if (fpu_sp.ver | fpu_dp.ver) + n += scnprintf(buf + n, len - n, "FPU\t\t: %s%s\n", + IS_AVAIL1(fpu_sp.ver, "SP "), + IS_AVAIL1(fpu_dp.ver, "DP ")); + + READ_BCR(ARC_REG_BPU_BCR, bpu); + bpu_full = bpu.fam ? 1 : 0; + bpu_cache = 256 << (bpu.ent - 1); + bpu_pred = 256 << (bpu.ent - 1); + + n += scnprintf(buf + n, len - n, + "BPU\t\t: %s%s match, cache:%d, Predict Table:%d\n", + IS_AVAIL1(bpu_full, "full"), + IS_AVAIL1(!bpu_full, "partial"), + bpu_cache, bpu_pred); + + READ_BCR(ARC_REG_ICCM_BUILD, iccm); + if (iccm.ver) { + info->iccm.sz = 4096 << iccm.sz; /* 8K to 512K */ + info->iccm.base = iccm.base << 16; + } + + READ_BCR(ARC_REG_DCCM_BUILD, dccm); + if (dccm.ver) { + unsigned long base; + info->dccm.sz = 2048 << dccm.sz; /* 2K to 256K */ + + base = read_aux_reg(ARC_REG_DCCM_BASE_BUILD); + info->dccm.base = base & ~0xF; + } + + /* ARCompact ISA specific sanity checks */ + present = fpu_dp.ver; /* SP has no arch visible regs */ + CHK_OPT_STRICT(CONFIG_ARC_FPU_SAVE_RESTORE, present); +#endif + return n; + +} + +static int arcv2_mumbojumbo(int c, struct cpuinfo_arc *info, char *buf, int len) +{ + int n = 0; +#ifdef CONFIG_ISA_ARCV2 + const char *release = "", *cpu_nm = "HS38", *isa_nm = "ARCv2"; + int dual_issue = 0, dual_enb = 0, mpy_opt, present; + int bpu_full, bpu_cache, bpu_pred, bpu_ret_stk; + char mpy_nm[16], lpb_nm[32]; + struct bcr_isa_arcv2 isa; + struct bcr_mpy mpy; + struct bcr_fp_arcv2 fpu; + struct bcr_bpu_arcv2 bpu; + struct bcr_lpb lpb; + struct bcr_iccm_arcv2 iccm; + struct bcr_dccm_arcv2 dccm; + struct bcr_erp erp; + + /* + * Initial HS cores bumped AUX IDENTITY.ARCVER for each release until + * ARCVER 0x54 which introduced AUX MICRO_ARCH_BUILD and subsequent + * releases only update it. + */ + + if (info->arcver > 0x50 && info->arcver <= 0x53) { + release = arc_hs_rel[info->arcver - 0x51].str; + } else { + const struct id_to_str *tbl; + struct bcr_uarch_build uarch; + + READ_BCR(ARC_REG_MICRO_ARCH_BCR, uarch); + + for (tbl = &arc_hs_ver54_rel[0]; tbl->id != 0xFF; tbl++) { + if (uarch.maj == tbl->id) { + release = tbl->str; + break; + } + } + if (uarch.prod == 4) { + unsigned int exec_ctrl; + + cpu_nm = "HS48"; + dual_issue = 1; + /* if dual issue hardware, is it enabled ? */ + READ_BCR(AUX_EXEC_CTRL, exec_ctrl); + dual_enb = !(exec_ctrl & 1); + } + } + + READ_BCR(ARC_REG_ISA_CFG_BCR, isa); + + n += scnprintf(buf + n, len - n, "processor [%d]\t: %s %s (%s ISA) %s%s%s\n", + c, cpu_nm, release, isa_nm, + IS_AVAIL1(isa.be, "[Big-Endian]"), + IS_AVAIL3(dual_issue, dual_enb, " Dual-Issue ")); + + READ_BCR(ARC_REG_MPY_BCR, mpy); + mpy_opt = 2; /* stock MPY/MPYH */ + if (mpy.dsp) /* OPT 7-9 */ + mpy_opt = mpy.dsp + 6; + + scnprintf(mpy_nm, 16, "mpy[opt %d] ", mpy_opt); + + READ_BCR(ARC_REG_FP_V2_BCR, fpu); + + n += scnprintf(buf + n, len - n, "ISA Extn\t: %s%s%s%s%s%s%s%s%s%s%s\n", + IS_AVAIL2(isa.atomic, "atomic ", CONFIG_ARC_HAS_LLSC), + IS_AVAIL2(isa.ldd, "ll64 ", CONFIG_ARC_HAS_LL64), + IS_AVAIL2(isa.unalign, "unalign ", CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS), + IS_AVAIL1(mpy.ver, mpy_nm), + IS_AVAIL1(isa.div_rem, "div_rem "), + IS_AVAIL1((fpu.sp | fpu.dp), " FPU:"), + IS_AVAIL1(fpu.sp, " sp"), + IS_AVAIL1(fpu.dp, " dp")); + + READ_BCR(ARC_REG_BPU_BCR, bpu); + bpu_full = bpu.ft; + bpu_cache = 256 << bpu.bce; + bpu_pred = 2048 << bpu.pte; + bpu_ret_stk = 4 << bpu.rse; + + READ_BCR(ARC_REG_LPB_BUILD, lpb); + if (lpb.ver) { + unsigned int ctl; + ctl = read_aux_reg(ARC_REG_LPB_CTRL); + + scnprintf(lpb_nm, sizeof(lpb_nm), " Loop Buffer:%d %s", + lpb.entries, IS_DISABLED_RUN(!ctl)); + } + + n += scnprintf(buf + n, len - n, + "BPU\t\t: %s%s match, cache:%d, Predict Table:%d Return stk: %d%s\n", + IS_AVAIL1(bpu_full, "full"), + IS_AVAIL1(!bpu_full, "partial"), + bpu_cache, bpu_pred, bpu_ret_stk, + lpb_nm); + + READ_BCR(ARC_REG_ICCM_BUILD, iccm); + if (iccm.ver) { + unsigned long base; + info->iccm.sz = 256 << iccm.sz00; /* 512B to 16M */ + if (iccm.sz00 == 0xF && iccm.sz01 > 0) + info->iccm.sz <<= iccm.sz01; + base = read_aux_reg(ARC_REG_AUX_ICCM); + info->iccm.base = base & 0xF0000000; + } + + READ_BCR(ARC_REG_DCCM_BUILD, dccm); + if (dccm.ver) { + unsigned long base; + info->dccm.sz = 256 << dccm.sz0; + if (dccm.sz0 == 0xF && dccm.sz1 > 0) + info->dccm.sz <<= dccm.sz1; + base = read_aux_reg(ARC_REG_AUX_DCCM); + info->dccm.base = base & 0xF0000000; + } + + /* Error Protection: ECC/Parity */ + READ_BCR(ARC_REG_ERP_BUILD, erp); + if (erp.ver) { + struct ctl_erp ctl; + READ_BCR(ARC_REG_ERP_CTRL, ctl); + /* inverted bits: 0 means enabled */ + n += scnprintf(buf + n, len - n, "Extn [ECC]\t: %s%s%s%s%s%s\n", + IS_AVAIL3(erp.ic, !ctl.dpi, "IC "), + IS_AVAIL3(erp.dc, !ctl.dpd, "DC "), + IS_AVAIL3(erp.mmu, !ctl.mpd, "MMU ")); + } + + /* ARCv2 ISA specific sanity checks */ + present = fpu.sp | fpu.dp | mpy.dsp; /* DSP and/or FPU */ + CHK_OPT_STRICT(CONFIG_ARC_HAS_ACCL_REGS, present); + + dsp_config_check(); +#endif + return n; +} + +static char *arc_cpu_mumbojumbo(int c, struct cpuinfo_arc *info, char *buf, int len) +{ + struct bcr_identity ident; + struct bcr_timer timer; + struct bcr_generic bcr; + struct mcip_bcr mp; + struct bcr_actionpoint ap; + unsigned long vec_base; + int ap_num, ap_full, smart, rtt, n; + + memset(info, 0, sizeof(struct cpuinfo_arc)); + + READ_BCR(AUX_IDENTITY, ident); + info->arcver = ident.family; + + n = scnprintf(buf, len, + "\nIDENTITY\t: ARCVER [%#02x] ARCNUM [%#02x] CHIPID [%#4x]\n", + ident.family, ident.cpu_id, ident.chip_id); + + if (is_isa_arcompact()) { + n += arcompact_mumbojumbo(c, info, buf + n, len - n); + } else if (is_isa_arcv2()){ + n += arcv2_mumbojumbo(c, info, buf + n, len - n); + } + + n += arc_mmu_mumbojumbo(c, buf + n, len - n); + n += arc_cache_mumbojumbo(c, buf + n, len - n); + + READ_BCR(ARC_REG_TIMERS_BCR, timer); + info->t0 = timer.t0; + info->t1 = timer.t1; + + READ_BCR(ARC_REG_MCIP_BCR, mp); + vec_base = read_aux_reg(AUX_INTR_VEC_BASE); + + n += scnprintf(buf + n, len - n, + "Timers\t\t: %s%s%s%s%s%s\nVector Table\t: %#lx\n", + IS_AVAIL1(timer.t0, "Timer0 "), + IS_AVAIL1(timer.t1, "Timer1 "), + IS_AVAIL2(timer.rtc, "RTC [UP 64-bit] ", CONFIG_ARC_TIMERS_64BIT), + IS_AVAIL2(mp.gfrc, "GFRC [SMP 64-bit] ", CONFIG_ARC_TIMERS_64BIT), + vec_base); + + READ_BCR(ARC_REG_AP_BCR, ap); + if (ap.ver) { + ap_num = 2 << ap.num; + ap_full = !ap.min; + } + + READ_BCR(ARC_REG_SMART_BCR, bcr); + smart = bcr.ver ? 1 : 0; + + READ_BCR(ARC_REG_RTT_BCR, bcr); + rtt = bcr.ver ? 1 : 0; + + if (ap.ver | smart | rtt) { + n += scnprintf(buf + n, len - n, "DEBUG\t\t: %s%s", + IS_AVAIL1(smart, "smaRT "), + IS_AVAIL1(rtt, "RTT ")); + if (ap.ver) { + n += scnprintf(buf + n, len - n, "ActionPoint %d/%s", + ap_num, + ap_full ? "full":"min"); + } + n += scnprintf(buf + n, len - n, "\n"); + } + + if (info->dccm.sz || info->iccm.sz) + n += scnprintf(buf + n, len - n, + "Extn [CCM]\t: DCCM @ %lx, %d KB / ICCM: @ %lx, %d KB\n", + info->dccm.base, TO_KB(info->dccm.sz), + info->iccm.base, TO_KB(info->iccm.sz)); + + return buf; +} + +void chk_opt_strict(char *opt_name, bool hw_exists, bool opt_ena) +{ + if (hw_exists && !opt_ena) + pr_warn(" ! Enable %s for working apps\n", opt_name); + else if (!hw_exists && opt_ena) + panic("Disable %s, hardware NOT present\n", opt_name); +} + +void chk_opt_weak(char *opt_name, bool hw_exists, bool opt_ena) +{ + if (!hw_exists && opt_ena) + panic("Disable %s, hardware NOT present\n", opt_name); +} + +/* + * ISA agnostic sanity checks + */ +static void arc_chk_core_config(struct cpuinfo_arc *info) +{ + if (!info->t0) + panic("Timer0 is not present!\n"); + + if (!info->t1) + panic("Timer1 is not present!\n"); + +#ifdef CONFIG_ARC_HAS_DCCM + /* + * DCCM can be arbit placed in hardware. + * Make sure it's placement/sz matches what Linux is built with + */ + if ((unsigned int)__arc_dccm_base != info->dccm.base) + panic("Linux built with incorrect DCCM Base address\n"); + + if (CONFIG_ARC_DCCM_SZ * SZ_1K != info->dccm.sz) + panic("Linux built with incorrect DCCM Size\n"); +#endif + +#ifdef CONFIG_ARC_HAS_ICCM + if (CONFIG_ARC_ICCM_SZ * SZ_1K != info->iccm.sz) + panic("Linux built with incorrect ICCM Size\n"); +#endif +} + +/* + * Initialize and setup the processor core + * This is called by all the CPUs thus should not do special case stuff + * such as only for boot CPU etc + */ + +void setup_processor(void) +{ + struct cpuinfo_arc info; + int c = smp_processor_id(); + char str[512]; + + pr_info("%s", arc_cpu_mumbojumbo(c, &info, str, sizeof(str))); + pr_info("%s", arc_platform_smp_cpuinfo()); + + arc_chk_core_config(&info); + + arc_init_IRQ(); + arc_mmu_init(); + arc_cache_init(); + +} + +static inline bool uboot_arg_invalid(unsigned long addr) +{ + /* + * Check that it is a untranslated address (although MMU is not enabled + * yet, it being a high address ensures this is not by fluke) + */ + if (addr < PAGE_OFFSET) + return true; + + /* Check that address doesn't clobber resident kernel image */ + return addr >= (unsigned long)_stext && addr <= (unsigned long)_end; +} + +#define IGNORE_ARGS "Ignore U-boot args: " + +/* uboot_tag values for U-boot - kernel ABI revision 0; see head.S */ +#define UBOOT_TAG_NONE 0 +#define UBOOT_TAG_CMDLINE 1 +#define UBOOT_TAG_DTB 2 +/* We always pass 0 as magic from U-boot */ +#define UBOOT_MAGIC_VALUE 0 + +void __init handle_uboot_args(void) +{ + bool use_embedded_dtb = true; + bool append_cmdline = false; + + /* check that we know this tag */ + if (uboot_tag != UBOOT_TAG_NONE && + uboot_tag != UBOOT_TAG_CMDLINE && + uboot_tag != UBOOT_TAG_DTB) { + pr_warn(IGNORE_ARGS "invalid uboot tag: '%08x'\n", uboot_tag); + goto ignore_uboot_args; + } + + if (uboot_magic != UBOOT_MAGIC_VALUE) { + pr_warn(IGNORE_ARGS "non zero uboot magic\n"); + goto ignore_uboot_args; + } + + if (uboot_tag != UBOOT_TAG_NONE && + uboot_arg_invalid((unsigned long)uboot_arg)) { + pr_warn(IGNORE_ARGS "invalid uboot arg: '%px'\n", uboot_arg); + goto ignore_uboot_args; + } + + /* see if U-boot passed an external Device Tree blob */ + if (uboot_tag == UBOOT_TAG_DTB) { + machine_desc = setup_machine_fdt((void *)uboot_arg); + + /* external Device Tree blob is invalid - use embedded one */ + use_embedded_dtb = !machine_desc; + } + + if (uboot_tag == UBOOT_TAG_CMDLINE) + append_cmdline = true; + +ignore_uboot_args: + + if (use_embedded_dtb) { + machine_desc = setup_machine_fdt(__dtb_start); + if (!machine_desc) + panic("Embedded DT invalid\n"); + } + + /* + * NOTE: @boot_command_line is populated by setup_machine_fdt() so this + * append processing can only happen after. + */ + if (append_cmdline) { + /* Ensure a whitespace between the 2 cmdlines */ + strlcat(boot_command_line, " ", COMMAND_LINE_SIZE); + strlcat(boot_command_line, uboot_arg, COMMAND_LINE_SIZE); + } +} + +void __init setup_arch(char **cmdline_p) +{ + handle_uboot_args(); + + /* Save unparsed command line copy for /proc/cmdline */ + *cmdline_p = boot_command_line; + + /* To force early parsing of things like mem=xxx */ + parse_early_param(); + + /* Platform/board specific: e.g. early console registration */ + if (machine_desc->init_early) + machine_desc->init_early(); + + smp_init_cpus(); + + setup_processor(); + setup_arch_memory(); + + /* copy flat DT out of .init and then unflatten it */ + unflatten_and_copy_device_tree(); + + /* Can be issue if someone passes cmd line arg "ro" + * But that is unlikely so keeping it as it is + */ + root_mountflags &= ~MS_RDONLY; + + arc_unwind_init(); +} + +/* + * Called from start_kernel() - boot CPU only + */ +void __init time_init(void) +{ + of_clk_init(NULL); + timer_probe(); +} + +static int __init customize_machine(void) +{ + if (machine_desc->init_machine) + machine_desc->init_machine(); + + return 0; +} +arch_initcall(customize_machine); + +static int __init init_late_machine(void) +{ + if (machine_desc->init_late) + machine_desc->init_late(); + + return 0; +} +late_initcall(init_late_machine); +/* + * Get CPU information for use by the procfs. + */ + +#define cpu_to_ptr(c) ((void *)(0xFFFF0000 | (unsigned int)(c))) +#define ptr_to_cpu(p) (~0xFFFF0000UL & (unsigned int)(p)) + +static int show_cpuinfo(struct seq_file *m, void *v) +{ + char *str; + int cpu_id = ptr_to_cpu(v); + struct device *cpu_dev = get_cpu_device(cpu_id); + struct cpuinfo_arc info; + struct clk *cpu_clk; + unsigned long freq = 0; + + if (!cpu_online(cpu_id)) { + seq_printf(m, "processor [%d]\t: Offline\n", cpu_id); + goto done; + } + + str = (char *)__get_free_page(GFP_KERNEL); + if (!str) + goto done; + + seq_printf(m, arc_cpu_mumbojumbo(cpu_id, &info, str, PAGE_SIZE)); + + cpu_clk = clk_get(cpu_dev, NULL); + if (IS_ERR(cpu_clk)) { + seq_printf(m, "CPU speed \t: Cannot get clock for processor [%d]\n", + cpu_id); + } else { + freq = clk_get_rate(cpu_clk); + } + if (freq) + seq_printf(m, "CPU speed\t: %lu.%02lu Mhz\n", + freq / 1000000, (freq / 10000) % 100); + + seq_printf(m, "Bogo MIPS\t: %lu.%02lu\n", + loops_per_jiffy / (500000 / HZ), + (loops_per_jiffy / (5000 / HZ)) % 100); + + seq_printf(m, arc_platform_smp_cpuinfo()); + + free_page((unsigned long)str); +done: + seq_printf(m, "\n"); + + return 0; +} + +static void *c_start(struct seq_file *m, loff_t *pos) +{ + /* + * Callback returns cpu-id to iterator for show routine, NULL to stop. + * However since NULL is also a valid cpu-id (0), we use a round-about + * way to pass it w/o having to kmalloc/free a 2 byte string. + * Encode cpu-id as 0xFFcccc, which is decoded by show routine. + */ + return *pos < nr_cpu_ids ? cpu_to_ptr(*pos) : NULL; +} + +static void *c_next(struct seq_file *m, void *v, loff_t *pos) +{ + ++*pos; + return c_start(m, pos); +} + +static void c_stop(struct seq_file *m, void *v) +{ +} + +const struct seq_operations cpuinfo_op = { + .start = c_start, + .next = c_next, + .stop = c_stop, + .show = show_cpuinfo +}; + +static DEFINE_PER_CPU(struct cpu, cpu_topology); + +static int __init topology_init(void) +{ + int cpu; + + for_each_present_cpu(cpu) + register_cpu(&per_cpu(cpu_topology, cpu), cpu); + + return 0; +} + +subsys_initcall(topology_init); diff --git a/arch/arc/kernel/signal.c b/arch/arc/kernel/signal.c new file mode 100644 index 0000000000..8f6f4a5429 --- /dev/null +++ b/arch/arc/kernel/signal.c @@ -0,0 +1,443 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Signal Handling for ARC + * + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * vineetg: Jan 2010 (Restarting of timer related syscalls) + * + * vineetg: Nov 2009 (Everything needed for TIF_RESTORE_SIGMASK) + * -do_signal() supports TIF_RESTORE_SIGMASK + * -do_signal() no loner needs oldset, required by OLD sys_sigsuspend + * -sys_rt_sigsuspend() now comes from generic code, so discard arch implemen + * -sys_sigsuspend() no longer needs to fudge ptregs, hence that arg removed + * -sys_sigsuspend() no longer loops for do_signal(), sets TIF_xxx and leaves + * the job to do_signal() + * + * vineetg: July 2009 + * -Modified Code to support the uClibc provided userland sigreturn stub + * to avoid kernel synthesing it on user stack at runtime, costing TLB + * probes and Cache line flushes. + * + * vineetg: July 2009 + * -In stash_usr_regs( ) and restore_usr_regs( ), save/restore of user regs + * in done in block copy rather than one word at a time. + * This saves around 2K of code and improves LMBench lat_sig <catch> + * + * rajeshwarr: Feb 2009 + * - Support for Realtime Signals + * + * vineetg: Aug 11th 2008: Bug #94183 + * -ViXS were still seeing crashes when using insmod to load drivers. + * It turned out that the code to change Execute permssions for TLB entries + * of user was not guarded for interrupts (mod_tlb_permission) + * This was causing TLB entries to be overwritten on unrelated indexes + * + * Vineetg: July 15th 2008: Bug #94183 + * -Exception happens in Delay slot of a JMP, and before user space resumes, + * Signal is delivered (Ctrl + C) = >SIGINT. + * setup_frame( ) sets up PC,SP,BLINK to enable user space signal handler + * to run, but doesn't clear the Delay slot bit from status32. As a result, + * on resuming user mode, signal handler branches off to BTA of orig JMP + * -FIX: clear the DE bit from status32 in setup_frame( ) + * + * Rahul Trivedi, Kanika Nema: Codito Technologies 2004 + */ + +#include <linux/signal.h> +#include <linux/ptrace.h> +#include <linux/personality.h> +#include <linux/uaccess.h> +#include <linux/syscalls.h> +#include <linux/resume_user_mode.h> +#include <linux/sched/task_stack.h> + +#include <asm/ucontext.h> +#include <asm/entry.h> + +struct rt_sigframe { + struct siginfo info; + struct ucontext uc; +#define MAGIC_SIGALTSTK 0x07302004 + unsigned int sigret_magic; +}; + +static int save_arcv2_regs(struct sigcontext __user *mctx, struct pt_regs *regs) +{ + int err = 0; +#ifndef CONFIG_ISA_ARCOMPACT + struct user_regs_arcv2 v2abi; + + v2abi.r30 = regs->r30; +#ifdef CONFIG_ARC_HAS_ACCL_REGS + v2abi.r58 = regs->r58; + v2abi.r59 = regs->r59; +#else + v2abi.r58 = v2abi.r59 = 0; +#endif + err = __copy_to_user(&mctx->v2abi, (void const *)&v2abi, sizeof(v2abi)); +#endif + return err; +} + +static int restore_arcv2_regs(struct sigcontext __user *mctx, struct pt_regs *regs) +{ + int err = 0; +#ifndef CONFIG_ISA_ARCOMPACT + struct user_regs_arcv2 v2abi; + + err = __copy_from_user(&v2abi, &mctx->v2abi, sizeof(v2abi)); + + regs->r30 = v2abi.r30; +#ifdef CONFIG_ARC_HAS_ACCL_REGS + regs->r58 = v2abi.r58; + regs->r59 = v2abi.r59; +#endif +#endif + return err; +} + +static int +stash_usr_regs(struct rt_sigframe __user *sf, struct pt_regs *regs, + sigset_t *set) +{ + int err; + struct user_regs_struct uregs; + + uregs.scratch.bta = regs->bta; + uregs.scratch.lp_start = regs->lp_start; + uregs.scratch.lp_end = regs->lp_end; + uregs.scratch.lp_count = regs->lp_count; + uregs.scratch.status32 = regs->status32; + uregs.scratch.ret = regs->ret; + uregs.scratch.blink = regs->blink; + uregs.scratch.fp = regs->fp; + uregs.scratch.gp = regs->r26; + uregs.scratch.r12 = regs->r12; + uregs.scratch.r11 = regs->r11; + uregs.scratch.r10 = regs->r10; + uregs.scratch.r9 = regs->r9; + uregs.scratch.r8 = regs->r8; + uregs.scratch.r7 = regs->r7; + uregs.scratch.r6 = regs->r6; + uregs.scratch.r5 = regs->r5; + uregs.scratch.r4 = regs->r4; + uregs.scratch.r3 = regs->r3; + uregs.scratch.r2 = regs->r2; + uregs.scratch.r1 = regs->r1; + uregs.scratch.r0 = regs->r0; + uregs.scratch.sp = regs->sp; + + err = __copy_to_user(&(sf->uc.uc_mcontext.regs.scratch), &uregs.scratch, + sizeof(sf->uc.uc_mcontext.regs.scratch)); + + if (is_isa_arcv2()) + err |= save_arcv2_regs(&(sf->uc.uc_mcontext), regs); + + err |= __copy_to_user(&sf->uc.uc_sigmask, set, sizeof(sigset_t)); + + return err ? -EFAULT : 0; +} + +static int restore_usr_regs(struct pt_regs *regs, struct rt_sigframe __user *sf) +{ + sigset_t set; + int err; + struct user_regs_struct uregs; + + err = __copy_from_user(&set, &sf->uc.uc_sigmask, sizeof(set)); + err |= __copy_from_user(&uregs.scratch, + &(sf->uc.uc_mcontext.regs.scratch), + sizeof(sf->uc.uc_mcontext.regs.scratch)); + + if (is_isa_arcv2()) + err |= restore_arcv2_regs(&(sf->uc.uc_mcontext), regs); + + if (err) + return -EFAULT; + + set_current_blocked(&set); + regs->bta = uregs.scratch.bta; + regs->lp_start = uregs.scratch.lp_start; + regs->lp_end = uregs.scratch.lp_end; + regs->lp_count = uregs.scratch.lp_count; + regs->status32 = uregs.scratch.status32; + regs->ret = uregs.scratch.ret; + regs->blink = uregs.scratch.blink; + regs->fp = uregs.scratch.fp; + regs->r26 = uregs.scratch.gp; + regs->r12 = uregs.scratch.r12; + regs->r11 = uregs.scratch.r11; + regs->r10 = uregs.scratch.r10; + regs->r9 = uregs.scratch.r9; + regs->r8 = uregs.scratch.r8; + regs->r7 = uregs.scratch.r7; + regs->r6 = uregs.scratch.r6; + regs->r5 = uregs.scratch.r5; + regs->r4 = uregs.scratch.r4; + regs->r3 = uregs.scratch.r3; + regs->r2 = uregs.scratch.r2; + regs->r1 = uregs.scratch.r1; + regs->r0 = uregs.scratch.r0; + regs->sp = uregs.scratch.sp; + + return 0; +} + +static inline int is_do_ss_needed(unsigned int magic) +{ + if (MAGIC_SIGALTSTK == magic) + return 1; + else + return 0; +} + +SYSCALL_DEFINE0(rt_sigreturn) +{ + struct rt_sigframe __user *sf; + unsigned int magic; + struct pt_regs *regs = current_pt_regs(); + + /* Always make any pending restarted system calls return -EINTR */ + current->restart_block.fn = do_no_restart_syscall; + + /* Since we stacked the signal on a word boundary, + * then 'sp' should be word aligned here. If it's + * not, then the user is trying to mess with us. + */ + if (regs->sp & 3) + goto badframe; + + sf = (struct rt_sigframe __force __user *)(regs->sp); + + if (!access_ok(sf, sizeof(*sf))) + goto badframe; + + if (__get_user(magic, &sf->sigret_magic)) + goto badframe; + + if (unlikely(is_do_ss_needed(magic))) + if (restore_altstack(&sf->uc.uc_stack)) + goto badframe; + + if (restore_usr_regs(regs, sf)) + goto badframe; + + /* Don't restart from sigreturn */ + syscall_wont_restart(regs); + + /* + * Ensure that sigreturn always returns to user mode (in case the + * regs saved on user stack got fudged between save and sigreturn) + * Otherwise it is easy to panic the kernel with a custom + * signal handler and/or restorer which clobberes the status32/ret + * to return to a bogus location in kernel mode. + */ + regs->status32 |= STATUS_U_MASK; + + return regs->r0; + +badframe: + force_sig(SIGSEGV); + return 0; +} + +/* + * Determine which stack to use.. + */ +static inline void __user *get_sigframe(struct ksignal *ksig, + struct pt_regs *regs, + unsigned long framesize) +{ + unsigned long sp = sigsp(regs->sp, ksig); + void __user *frame; + + /* No matter what happens, 'sp' must be word + * aligned otherwise nasty things could happen + */ + + /* ATPCS B01 mandates 8-byte alignment */ + frame = (void __user *)((sp - framesize) & ~7); + + /* Check that we can actually write to the signal frame */ + if (!access_ok(frame, framesize)) + frame = NULL; + + return frame; +} + +static int +setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs) +{ + struct rt_sigframe __user *sf; + unsigned int magic = 0; + int err = 0; + + sf = get_sigframe(ksig, regs, sizeof(struct rt_sigframe)); + if (!sf) + return 1; + + /* + * w/o SA_SIGINFO, struct ucontext is partially populated (only + * uc_mcontext/uc_sigmask) for kernel's normal user state preservation + * during signal handler execution. This works for SA_SIGINFO as well + * although the semantics are now overloaded (the same reg state can be + * inspected by userland: but are they allowed to fiddle with it ? + */ + err |= stash_usr_regs(sf, regs, set); + + /* + * SA_SIGINFO requires 3 args to signal handler: + * #1: sig-no (common to any handler) + * #2: struct siginfo + * #3: struct ucontext (completely populated) + */ + if (unlikely(ksig->ka.sa.sa_flags & SA_SIGINFO)) { + err |= copy_siginfo_to_user(&sf->info, &ksig->info); + err |= __put_user(0, &sf->uc.uc_flags); + err |= __put_user(NULL, &sf->uc.uc_link); + err |= __save_altstack(&sf->uc.uc_stack, regs->sp); + + /* setup args 2 and 3 for user mode handler */ + regs->r1 = (unsigned long)&sf->info; + regs->r2 = (unsigned long)&sf->uc; + + /* + * small optim to avoid unconditionally calling do_sigaltstack + * in sigreturn path, now that we only have rt_sigreturn + */ + magic = MAGIC_SIGALTSTK; + } + + err |= __put_user(magic, &sf->sigret_magic); + if (err) + return err; + + /* #1 arg to the user Signal handler */ + regs->r0 = ksig->sig; + + /* setup PC of user space signal handler */ + regs->ret = (unsigned long)ksig->ka.sa.sa_handler; + + /* + * handler returns using sigreturn stub provided already by userspace + * If not, nuke the process right away + */ + if(!(ksig->ka.sa.sa_flags & SA_RESTORER)) + return 1; + + regs->blink = (unsigned long)ksig->ka.sa.sa_restorer; + + /* User Stack for signal handler will be above the frame just carved */ + regs->sp = (unsigned long)sf; + + /* + * Bug 94183, Clear the DE bit, so that when signal handler + * starts to run, it doesn't use BTA + */ + regs->status32 &= ~STATUS_DE_MASK; + regs->status32 |= STATUS_L_MASK; + + return err; +} + +static void arc_restart_syscall(struct k_sigaction *ka, struct pt_regs *regs) +{ + switch (regs->r0) { + case -ERESTART_RESTARTBLOCK: + case -ERESTARTNOHAND: + /* + * ERESTARTNOHAND means that the syscall should + * only be restarted if there was no handler for + * the signal, and since we only get here if there + * is a handler, we don't restart + */ + regs->r0 = -EINTR; /* ERESTART_xxx is internal */ + break; + + case -ERESTARTSYS: + /* + * ERESTARTSYS means to restart the syscall if + * there is no handler or the handler was + * registered with SA_RESTART + */ + if (!(ka->sa.sa_flags & SA_RESTART)) { + regs->r0 = -EINTR; + break; + } + fallthrough; + + case -ERESTARTNOINTR: + /* + * ERESTARTNOINTR means that the syscall should + * be called again after the signal handler returns. + * Setup reg state just as it was before doing the trap + * r0 has been clobbered with sys call ret code thus it + * needs to be reloaded with orig first arg to syscall + * in orig_r0. Rest of relevant reg-file: + * r8 (syscall num) and (r1 - r7) will be reset to + * their orig user space value when we ret from kernel + */ + regs->r0 = regs->orig_r0; + regs->ret -= is_isa_arcv2() ? 2 : 4; + break; + } +} + +/* + * OK, we're invoking a handler + */ +static void +handle_signal(struct ksignal *ksig, struct pt_regs *regs) +{ + sigset_t *oldset = sigmask_to_save(); + int failed; + + /* Set up the stack frame */ + failed = setup_rt_frame(ksig, oldset, regs); + + signal_setup_done(failed, ksig, 0); +} + +void do_signal(struct pt_regs *regs) +{ + struct ksignal ksig; + int restart_scall; + + restart_scall = in_syscall(regs) && syscall_restartable(regs); + + if (test_thread_flag(TIF_SIGPENDING) && get_signal(&ksig)) { + if (restart_scall) { + arc_restart_syscall(&ksig.ka, regs); + syscall_wont_restart(regs); /* No more restarts */ + } + handle_signal(&ksig, regs); + return; + } + + if (restart_scall) { + /* No handler for syscall: restart it */ + if (regs->r0 == -ERESTARTNOHAND || + regs->r0 == -ERESTARTSYS || regs->r0 == -ERESTARTNOINTR) { + regs->r0 = regs->orig_r0; + regs->ret -= is_isa_arcv2() ? 2 : 4; + } else if (regs->r0 == -ERESTART_RESTARTBLOCK) { + regs->r8 = __NR_restart_syscall; + regs->ret -= is_isa_arcv2() ? 2 : 4; + } + syscall_wont_restart(regs); /* No more restarts */ + } + + /* If there's no signal to deliver, restore the saved sigmask back */ + restore_saved_sigmask(); +} + +void do_notify_resume(struct pt_regs *regs) +{ + /* + * ASM glue guarantees that this is only called when returning to + * user mode + */ + if (test_thread_flag(TIF_NOTIFY_RESUME)) + resume_user_mode_work(regs); +} diff --git a/arch/arc/kernel/smp.c b/arch/arc/kernel/smp.c new file mode 100644 index 0000000000..8d9b188caa --- /dev/null +++ b/arch/arc/kernel/smp.c @@ -0,0 +1,414 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * RajeshwarR: Dec 11, 2007 + * -- Added support for Inter Processor Interrupts + * + * Vineetg: Nov 1st, 2007 + * -- Initial Write (Borrowed heavily from ARM) + */ + +#include <linux/spinlock.h> +#include <linux/sched/mm.h> +#include <linux/interrupt.h> +#include <linux/profile.h> +#include <linux/mm.h> +#include <linux/cpu.h> +#include <linux/irq.h> +#include <linux/atomic.h> +#include <linux/cpumask.h> +#include <linux/reboot.h> +#include <linux/irqdomain.h> +#include <linux/export.h> +#include <linux/of_fdt.h> + +#include <asm/mach_desc.h> +#include <asm/setup.h> +#include <asm/smp.h> +#include <asm/processor.h> + +#ifndef CONFIG_ARC_HAS_LLSC +arch_spinlock_t smp_atomic_ops_lock = __ARCH_SPIN_LOCK_UNLOCKED; + +EXPORT_SYMBOL_GPL(smp_atomic_ops_lock); +#endif + +struct plat_smp_ops __weak plat_smp_ops; + +/* XXX: per cpu ? Only needed once in early secondary boot */ +struct task_struct *secondary_idle_tsk; + +/* Called from start_kernel */ +void __init smp_prepare_boot_cpu(void) +{ +} + +static int __init arc_get_cpu_map(const char *name, struct cpumask *cpumask) +{ + unsigned long dt_root = of_get_flat_dt_root(); + const char *buf; + + buf = of_get_flat_dt_prop(dt_root, name, NULL); + if (!buf) + return -EINVAL; + + if (cpulist_parse(buf, cpumask)) + return -EINVAL; + + return 0; +} + +/* + * Read from DeviceTree and setup cpu possible mask. If there is no + * "possible-cpus" property in DeviceTree pretend all [0..NR_CPUS-1] exist. + */ +static void __init arc_init_cpu_possible(void) +{ + struct cpumask cpumask; + + if (arc_get_cpu_map("possible-cpus", &cpumask)) { + pr_warn("Failed to get possible-cpus from dtb, pretending all %u cpus exist\n", + NR_CPUS); + + cpumask_setall(&cpumask); + } + + if (!cpumask_test_cpu(0, &cpumask)) + panic("Master cpu (cpu[0]) is missed in cpu possible mask!"); + + init_cpu_possible(&cpumask); +} + +/* + * Called from setup_arch() before calling setup_processor() + * + * - Initialise the CPU possible map early - this describes the CPUs + * which may be present or become present in the system. + * - Call early smp init hook. This can initialize a specific multi-core + * IP which is say common to several platforms (hence not part of + * platform specific int_early() hook) + */ +void __init smp_init_cpus(void) +{ + arc_init_cpu_possible(); + + if (plat_smp_ops.init_early_smp) + plat_smp_ops.init_early_smp(); +} + +/* called from init ( ) => process 1 */ +void __init smp_prepare_cpus(unsigned int max_cpus) +{ + /* + * if platform didn't set the present map already, do it now + * boot cpu is set to present already by init/main.c + */ + if (num_present_cpus() <= 1) + init_cpu_present(cpu_possible_mask); +} + +void __init smp_cpus_done(unsigned int max_cpus) +{ + +} + +/* + * Default smp boot helper for Run-on-reset case where all cores start off + * together. Non-masters need to wait for Master to start running. + * This is implemented using a flag in memory, which Non-masters spin-wait on. + * Master sets it to cpu-id of core to "ungate" it. + */ +static volatile int wake_flag; + +#ifdef CONFIG_ISA_ARCOMPACT + +#define __boot_read(f) f +#define __boot_write(f, v) f = v + +#else + +#define __boot_read(f) arc_read_uncached_32(&f) +#define __boot_write(f, v) arc_write_uncached_32(&f, v) + +#endif + +static void arc_default_smp_cpu_kick(int cpu, unsigned long pc) +{ + BUG_ON(cpu == 0); + + __boot_write(wake_flag, cpu); +} + +void arc_platform_smp_wait_to_boot(int cpu) +{ + /* for halt-on-reset, we've waited already */ + if (IS_ENABLED(CONFIG_ARC_SMP_HALT_ON_RESET)) + return; + + while (__boot_read(wake_flag) != cpu) + ; + + __boot_write(wake_flag, 0); +} + +const char *arc_platform_smp_cpuinfo(void) +{ + return plat_smp_ops.info ? : ""; +} + +/* + * The very first "C" code executed by secondary + * Called from asm stub in head.S + * "current"/R25 already setup by low level boot code + */ +void start_kernel_secondary(void) +{ + struct mm_struct *mm = &init_mm; + unsigned int cpu = smp_processor_id(); + + /* MMU, Caches, Vector Table, Interrupts etc */ + setup_processor(); + + mmget(mm); + mmgrab(mm); + current->active_mm = mm; + cpumask_set_cpu(cpu, mm_cpumask(mm)); + + /* Some SMP H/w setup - for each cpu */ + if (plat_smp_ops.init_per_cpu) + plat_smp_ops.init_per_cpu(cpu); + + if (machine_desc->init_per_cpu) + machine_desc->init_per_cpu(cpu); + + notify_cpu_starting(cpu); + set_cpu_online(cpu, true); + + pr_info("## CPU%u LIVE ##: Executing Code...\n", cpu); + + local_irq_enable(); + cpu_startup_entry(CPUHP_AP_ONLINE_IDLE); +} + +/* + * Called from kernel_init( ) -> smp_init( ) - for each CPU + * + * At this point, Secondary Processor is "HALT"ed: + * -It booted, but was halted in head.S + * -It was configured to halt-on-reset + * So need to wake it up. + * + * Essential requirements being where to run from (PC) and stack (SP) +*/ +int __cpu_up(unsigned int cpu, struct task_struct *idle) +{ + unsigned long wait_till; + + secondary_idle_tsk = idle; + + pr_info("Idle Task [%d] %p", cpu, idle); + pr_info("Trying to bring up CPU%u ...\n", cpu); + + if (plat_smp_ops.cpu_kick) + plat_smp_ops.cpu_kick(cpu, + (unsigned long)first_lines_of_secondary); + else + arc_default_smp_cpu_kick(cpu, (unsigned long)NULL); + + /* wait for 1 sec after kicking the secondary */ + wait_till = jiffies + HZ; + while (time_before(jiffies, wait_till)) { + if (cpu_online(cpu)) + break; + } + + if (!cpu_online(cpu)) { + pr_info("Timeout: CPU%u FAILED to come up !!!\n", cpu); + return -1; + } + + secondary_idle_tsk = NULL; + + return 0; +} + +/*****************************************************************************/ +/* Inter Processor Interrupt Handling */ +/*****************************************************************************/ + +enum ipi_msg_type { + IPI_EMPTY = 0, + IPI_RESCHEDULE = 1, + IPI_CALL_FUNC, + IPI_CPU_STOP, +}; + +/* + * In arches with IRQ for each msg type (above), receiver can use IRQ-id to + * figure out what msg was sent. For those which don't (ARC has dedicated IPI + * IRQ), the msg-type needs to be conveyed via per-cpu data + */ + +static DEFINE_PER_CPU(unsigned long, ipi_data); + +static void ipi_send_msg_one(int cpu, enum ipi_msg_type msg) +{ + unsigned long __percpu *ipi_data_ptr = per_cpu_ptr(&ipi_data, cpu); + unsigned long old, new; + unsigned long flags; + + pr_debug("%d Sending msg [%d] to %d\n", smp_processor_id(), msg, cpu); + + local_irq_save(flags); + + /* + * Atomically write new msg bit (in case others are writing too), + * and read back old value + */ + do { + new = old = *ipi_data_ptr; + new |= 1U << msg; + } while (cmpxchg(ipi_data_ptr, old, new) != old); + + /* + * Call the platform specific IPI kick function, but avoid if possible: + * Only do so if there's no pending msg from other concurrent sender(s). + * Otherwise, receiver will see this msg as well when it takes the + * IPI corresponding to that msg. This is true, even if it is already in + * IPI handler, because !@old means it has not yet dequeued the msg(s) + * so @new msg can be a free-loader + */ + if (plat_smp_ops.ipi_send && !old) + plat_smp_ops.ipi_send(cpu); + + local_irq_restore(flags); +} + +static void ipi_send_msg(const struct cpumask *callmap, enum ipi_msg_type msg) +{ + unsigned int cpu; + + for_each_cpu(cpu, callmap) + ipi_send_msg_one(cpu, msg); +} + +void arch_smp_send_reschedule(int cpu) +{ + ipi_send_msg_one(cpu, IPI_RESCHEDULE); +} + +void smp_send_stop(void) +{ + struct cpumask targets; + cpumask_copy(&targets, cpu_online_mask); + cpumask_clear_cpu(smp_processor_id(), &targets); + ipi_send_msg(&targets, IPI_CPU_STOP); +} + +void arch_send_call_function_single_ipi(int cpu) +{ + ipi_send_msg_one(cpu, IPI_CALL_FUNC); +} + +void arch_send_call_function_ipi_mask(const struct cpumask *mask) +{ + ipi_send_msg(mask, IPI_CALL_FUNC); +} + +/* + * ipi_cpu_stop - handle IPI from smp_send_stop() + */ +static void ipi_cpu_stop(void) +{ + machine_halt(); +} + +static inline int __do_IPI(unsigned long msg) +{ + int rc = 0; + + switch (msg) { + case IPI_RESCHEDULE: + scheduler_ipi(); + break; + + case IPI_CALL_FUNC: + generic_smp_call_function_interrupt(); + break; + + case IPI_CPU_STOP: + ipi_cpu_stop(); + break; + + default: + rc = 1; + } + + return rc; +} + +/* + * arch-common ISR to handle for inter-processor interrupts + * Has hooks for platform specific IPI + */ +static irqreturn_t do_IPI(int irq, void *dev_id) +{ + unsigned long pending; + unsigned long __maybe_unused copy; + + pr_debug("IPI [%ld] received on cpu %d\n", + *this_cpu_ptr(&ipi_data), smp_processor_id()); + + if (plat_smp_ops.ipi_clear) + plat_smp_ops.ipi_clear(irq); + + /* + * "dequeue" the msg corresponding to this IPI (and possibly other + * piggybacked msg from elided IPIs: see ipi_send_msg_one() above) + */ + copy = pending = xchg(this_cpu_ptr(&ipi_data), 0); + + do { + unsigned long msg = __ffs(pending); + int rc; + + rc = __do_IPI(msg); + if (rc) + pr_info("IPI with bogus msg %ld in %ld\n", msg, copy); + pending &= ~(1U << msg); + } while (pending); + + return IRQ_HANDLED; +} + +/* + * API called by platform code to hookup arch-common ISR to their IPI IRQ + * + * Note: If IPI is provided by platform (vs. say ARC MCIP), their intc setup/map + * function needs to call irq_set_percpu_devid() for IPI IRQ, otherwise + * request_percpu_irq() below will fail + */ +static DEFINE_PER_CPU(int, ipi_dev); + +int smp_ipi_irq_setup(int cpu, irq_hw_number_t hwirq) +{ + int *dev = per_cpu_ptr(&ipi_dev, cpu); + unsigned int virq = irq_find_mapping(NULL, hwirq); + + if (!virq) + panic("Cannot find virq for root domain and hwirq=%lu", hwirq); + + /* Boot cpu calls request, all call enable */ + if (!cpu) { + int rc; + + rc = request_percpu_irq(virq, do_IPI, "IPI Interrupt", dev); + if (rc) + panic("Percpu IRQ request failed for %u\n", virq); + } + + enable_percpu_irq(virq, 0); + + return 0; +} diff --git a/arch/arc/kernel/stacktrace.c b/arch/arc/kernel/stacktrace.c new file mode 100644 index 0000000000..ea99c066ef --- /dev/null +++ b/arch/arc/kernel/stacktrace.c @@ -0,0 +1,275 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * stacktrace.c : stacktracing APIs needed by rest of kernel + * (wrappers over ARC dwarf based unwinder) + * + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * vineetg: aug 2009 + * -Implemented CONFIG_STACKTRACE APIs, primarily save_stack_trace_tsk( ) + * for displaying task's kernel mode call stack in /proc/<pid>/stack + * -Iterator based approach to have single copy of unwinding core and APIs + * needing unwinding, implement the logic in iterator regarding: + * = which frame onwards to start capture + * = which frame to stop capturing (wchan) + * = specifics of data structs where trace is saved(CONFIG_STACKTRACE etc) + * + * vineetg: March 2009 + * -Implemented correct versions of thread_saved_pc() and __get_wchan() + * + * rajeshwarr: 2008 + * -Initial implementation + */ + +#include <linux/ptrace.h> +#include <linux/export.h> +#include <linux/stacktrace.h> +#include <linux/kallsyms.h> +#include <linux/sched/debug.h> + +#include <asm/arcregs.h> +#include <asm/unwind.h> +#include <asm/stacktrace.h> +#include <asm/switch_to.h> + +/*------------------------------------------------------------------------- + * Unwinder Iterator + *------------------------------------------------------------------------- + */ + +#ifdef CONFIG_ARC_DW2_UNWIND + +static int +seed_unwind_frame_info(struct task_struct *tsk, struct pt_regs *regs, + struct unwind_frame_info *frame_info) +{ + if (regs) { + /* + * Asynchronous unwinding of intr/exception + * - Just uses the pt_regs passed + */ + frame_info->task = tsk; + + frame_info->regs.r27 = regs->fp; + frame_info->regs.r28 = regs->sp; + frame_info->regs.r31 = regs->blink; + frame_info->regs.r63 = regs->ret; + frame_info->call_frame = 0; + } else if (tsk == NULL || tsk == current) { + /* + * synchronous unwinding (e.g. dump_stack) + * - uses current values of SP and friends + */ + unsigned long fp, sp, blink, ret; + frame_info->task = current; + + __asm__ __volatile__( + "mov %0,r27\n\t" + "mov %1,r28\n\t" + "mov %2,r31\n\t" + "mov %3,r63\n\t" + : "=r"(fp), "=r"(sp), "=r"(blink), "=r"(ret) + ); + + frame_info->regs.r27 = fp; + frame_info->regs.r28 = sp; + frame_info->regs.r31 = blink; + frame_info->regs.r63 = ret; + frame_info->call_frame = 0; + } else { + /* + * Asynchronous unwinding of a likely sleeping task + * - first ensure it is actually sleeping + * - if so, it will be in __switch_to, kernel mode SP of task + * is safe-kept and BLINK at a well known location in there + */ + + if (task_is_running(tsk)) + return -1; + + frame_info->task = tsk; + + frame_info->regs.r27 = TSK_K_FP(tsk); + frame_info->regs.r28 = TSK_K_ESP(tsk); + frame_info->regs.r31 = TSK_K_BLINK(tsk); + frame_info->regs.r63 = (unsigned int)__switch_to; + + /* In the prologue of __switch_to, first FP is saved on stack + * and then SP is copied to FP. Dwarf assumes cfa as FP based + * but we didn't save FP. The value retrieved above is FP's + * state in previous frame. + * As a work around for this, we unwind from __switch_to start + * and adjust SP accordingly. The other limitation is that + * __switch_to macro is dwarf rules are not generated for inline + * assembly code + */ + frame_info->regs.r27 = 0; + frame_info->regs.r28 += 60; + frame_info->call_frame = 0; + + } + return 0; +} + +#endif + +notrace noinline unsigned int +arc_unwind_core(struct task_struct *tsk, struct pt_regs *regs, + int (*consumer_fn) (unsigned int, void *), void *arg) +{ +#ifdef CONFIG_ARC_DW2_UNWIND + int ret = 0, cnt = 0; + unsigned int address; + struct unwind_frame_info frame_info; + + if (seed_unwind_frame_info(tsk, regs, &frame_info)) + return 0; + + while (1) { + address = UNW_PC(&frame_info); + + if (!address || !__kernel_text_address(address)) + break; + + if (consumer_fn(address, arg) == -1) + break; + + ret = arc_unwind(&frame_info); + if (ret) + break; + + frame_info.regs.r63 = frame_info.regs.r31; + + if (cnt++ > 128) { + printk("unwinder looping too long, aborting !\n"); + return 0; + } + } + + return address; /* return the last address it saw */ +#else + /* On ARC, only Dward based unwinder works. fp based backtracing is + * not possible (-fno-omit-frame-pointer) because of the way function + * prologue is setup (callee regs saved and then fp set and not other + * way around + */ + pr_warn_once("CONFIG_ARC_DW2_UNWIND needs to be enabled\n"); + return 0; + +#endif +} + +/*------------------------------------------------------------------------- + * callbacks called by unwinder iterator to implement kernel APIs + * + * The callback can return -1 to force the iterator to stop, which by default + * keeps going till the bottom-most frame. + *------------------------------------------------------------------------- + */ + +/* Call-back which plugs into unwinding core to dump the stack in + * case of panic/OOPs/BUG etc + */ +static int __print_sym(unsigned int address, void *arg) +{ + const char *loglvl = arg; + + printk("%s %pS\n", loglvl, (void *)address); + return 0; +} + +#ifdef CONFIG_STACKTRACE + +/* Call-back which plugs into unwinding core to capture the + * traces needed by kernel on /proc/<pid>/stack + */ +static int __collect_all(unsigned int address, void *arg) +{ + struct stack_trace *trace = arg; + + if (trace->skip > 0) + trace->skip--; + else + trace->entries[trace->nr_entries++] = address; + + if (trace->nr_entries >= trace->max_entries) + return -1; + + return 0; +} + +static int __collect_all_but_sched(unsigned int address, void *arg) +{ + struct stack_trace *trace = arg; + + if (in_sched_functions(address)) + return 0; + + if (trace->skip > 0) + trace->skip--; + else + trace->entries[trace->nr_entries++] = address; + + if (trace->nr_entries >= trace->max_entries) + return -1; + + return 0; +} + +#endif + +static int __get_first_nonsched(unsigned int address, void *unused) +{ + if (in_sched_functions(address)) + return 0; + + return -1; +} + +/*------------------------------------------------------------------------- + * APIs expected by various kernel sub-systems + *------------------------------------------------------------------------- + */ + +noinline void show_stacktrace(struct task_struct *tsk, struct pt_regs *regs, + const char *loglvl) +{ + printk("%s\nStack Trace:\n", loglvl); + arc_unwind_core(tsk, regs, __print_sym, (void *)loglvl); +} +EXPORT_SYMBOL(show_stacktrace); + +/* Expected by sched Code */ +void show_stack(struct task_struct *tsk, unsigned long *sp, const char *loglvl) +{ + show_stacktrace(tsk, NULL, loglvl); +} + +/* Another API expected by schedular, shows up in "ps" as Wait Channel + * Of course just returning schedule( ) would be pointless so unwind until + * the function is not in schedular code + */ +unsigned int __get_wchan(struct task_struct *tsk) +{ + return arc_unwind_core(tsk, NULL, __get_first_nonsched, NULL); +} + +#ifdef CONFIG_STACKTRACE + +/* + * API required by CONFIG_STACKTRACE, CONFIG_LATENCYTOP. + * A typical use is when /proc/<pid>/stack is queried by userland + */ +void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace) +{ + /* Assumes @tsk is sleeping so unwinds from __switch_to */ + arc_unwind_core(tsk, NULL, __collect_all_but_sched, trace); +} + +void save_stack_trace(struct stack_trace *trace) +{ + /* Pass NULL for task so it unwinds the current call frame */ + arc_unwind_core(NULL, NULL, __collect_all, trace); +} +EXPORT_SYMBOL_GPL(save_stack_trace); +#endif diff --git a/arch/arc/kernel/sys.c b/arch/arc/kernel/sys.c new file mode 100644 index 0000000000..1069446bdc --- /dev/null +++ b/arch/arc/kernel/sys.c @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/syscalls.h> +#include <linux/signal.h> +#include <linux/unistd.h> + +#include <asm/syscalls.h> + +#define sys_clone sys_clone_wrapper +#define sys_clone3 sys_clone3_wrapper + +#undef __SYSCALL +#define __SYSCALL(nr, call) [nr] = (call), + +void *sys_call_table[NR_syscalls] = { + [0 ... NR_syscalls-1] = sys_ni_syscall, +#include <asm/unistd.h> +}; diff --git a/arch/arc/kernel/traps.c b/arch/arc/kernel/traps.c new file mode 100644 index 0000000000..9b9570b793 --- /dev/null +++ b/arch/arc/kernel/traps.c @@ -0,0 +1,158 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Traps/Non-MMU Exception handling for ARC + * + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * vineetg: May 2011 + * -user-space unaligned access emulation + * + * Rahul Trivedi: Codito Technologies 2004 + */ + +#include <linux/sched/signal.h> +#include <linux/kdebug.h> +#include <linux/uaccess.h> +#include <linux/ptrace.h> +#include <linux/kprobes.h> +#include <linux/kgdb.h> +#include <asm/entry.h> +#include <asm/setup.h> +#include <asm/unaligned.h> +#include <asm/kprobes.h> + +void die(const char *str, struct pt_regs *regs, unsigned long address) +{ + show_kernel_fault_diag(str, regs, address); + + /* DEAD END */ + __asm__("flag 1"); +} + +/* + * Helper called for bulk of exceptions NOT needing specific handling + * -for user faults enqueues requested signal + * -for kernel, chk if due to copy_(to|from)_user, otherwise die() + */ +static noinline int +unhandled_exception(const char *str, struct pt_regs *regs, + int signo, int si_code, void __user *addr) +{ + if (user_mode(regs)) { + struct task_struct *tsk = current; + + tsk->thread.fault_address = (__force unsigned int)addr; + + force_sig_fault(signo, si_code, addr); + + } else { + /* If not due to copy_(to|from)_user, we are doomed */ + if (fixup_exception(regs)) + return 0; + + die(str, regs, (unsigned long)addr); + } + + return 1; +} + +#define DO_ERROR_INFO(signr, str, name, sicode) \ +int name(unsigned long address, struct pt_regs *regs) \ +{ \ + return unhandled_exception(str, regs, signr, sicode, \ + (void __user *)address); \ +} + +/* + * Entry points for exceptions NOT needing specific handling + */ +DO_ERROR_INFO(SIGILL, "Priv Op/Disabled Extn", do_privilege_fault, ILL_PRVOPC) +DO_ERROR_INFO(SIGILL, "Invalid Extn Insn", do_extension_fault, ILL_ILLOPC) +DO_ERROR_INFO(SIGILL, "Illegal Insn (or Seq)", insterror_is_error, ILL_ILLOPC) +DO_ERROR_INFO(SIGBUS, "Invalid Mem Access", __weak do_memory_error, BUS_ADRERR) +DO_ERROR_INFO(SIGTRAP, "Breakpoint Set", trap_is_brkpt, TRAP_BRKPT) +DO_ERROR_INFO(SIGBUS, "Misaligned Access", do_misaligned_error, BUS_ADRALN) +DO_ERROR_INFO(SIGSEGV, "gcc generated __builtin_trap", do_trap5_error, 0) + +/* + * Entry Point for Misaligned Data access Exception, for emulating in software + */ +int do_misaligned_access(unsigned long address, struct pt_regs *regs, + struct callee_regs *cregs) +{ + /* If emulation not enabled, or failed, kill the task */ + if (misaligned_fixup(address, regs, cregs) != 0) + return do_misaligned_error(address, regs); + + return 0; +} + +/* + * Entry point for miscll errors such as Nested Exceptions + * -Duplicate TLB entry is handled seperately though + */ +void do_machine_check_fault(unsigned long address, struct pt_regs *regs) +{ + die("Unhandled Machine Check Exception", regs, address); +} + + +/* + * Entry point for traps induced by ARCompact TRAP_S <n> insn + * This is same family as TRAP0/SWI insn (use the same vector). + * The only difference being SWI insn take no operand, while TRAP_S does + * which reflects in ECR Reg as 8 bit param. + * Thus TRAP_S <n> can be used for specific purpose + * -1 used for software breakpointing (gdb) + * -2 used by kprobes + * -5 __builtin_trap() generated by gcc (2018.03 onwards) for toggle such as + * -fno-isolate-erroneous-paths-dereference + */ +void do_non_swi_trap(unsigned long address, struct pt_regs *regs) +{ + switch (regs->ecr.param) { + case 1: + trap_is_brkpt(address, regs); + break; + + case 2: + trap_is_kprobe(address, regs); + break; + + case 3: + case 4: + kgdb_trap(regs); + break; + + case 5: + do_trap5_error(address, regs); + break; + default: + break; + } +} + +/* + * Entry point for Instruction Error Exception + * -For a corner case, ARC kprobes implementation resorts to using + * this exception, hence the check + */ +void do_insterror_or_kprobe(unsigned long address, struct pt_regs *regs) +{ + int rc; + + /* Check if this exception is caused by kprobes */ + rc = notify_die(DIE_IERR, "kprobe_ierr", regs, address, 0, SIGILL); + if (rc == NOTIFY_STOP) + return; + + insterror_is_error(address, regs); +} + +/* + * abort() call generated by older gcc for __builtin_trap() + */ +void abort(void) +{ + __asm__ __volatile__("trap_s 5\n"); +} diff --git a/arch/arc/kernel/troubleshoot.c b/arch/arc/kernel/troubleshoot.c new file mode 100644 index 0000000000..d5b3ed2c58 --- /dev/null +++ b/arch/arc/kernel/troubleshoot.c @@ -0,0 +1,228 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#include <linux/ptrace.h> +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/fs.h> +#include <linux/kdev_t.h> +#include <linux/proc_fs.h> +#include <linux/file.h> +#include <linux/sched/mm.h> +#include <linux/sched/debug.h> + +#include <asm/arcregs.h> +#include <asm/irqflags.h> + +#define ARC_PATH_MAX 256 + +static noinline void print_regs_scratch(struct pt_regs *regs) +{ + pr_cont("BTA: 0x%08lx\n SP: 0x%08lx FP: 0x%08lx BLK: %pS\n", + regs->bta, regs->sp, regs->fp, (void *)regs->blink); + pr_cont("LPS: 0x%08lx\tLPE: 0x%08lx\tLPC: 0x%08lx\n", + regs->lp_start, regs->lp_end, regs->lp_count); + + pr_info("r00: 0x%08lx\tr01: 0x%08lx\tr02: 0x%08lx\n" \ + "r03: 0x%08lx\tr04: 0x%08lx\tr05: 0x%08lx\n" \ + "r06: 0x%08lx\tr07: 0x%08lx\tr08: 0x%08lx\n" \ + "r09: 0x%08lx\tr10: 0x%08lx\tr11: 0x%08lx\n" \ + "r12: 0x%08lx\t", + regs->r0, regs->r1, regs->r2, + regs->r3, regs->r4, regs->r5, + regs->r6, regs->r7, regs->r8, + regs->r9, regs->r10, regs->r11, + regs->r12); +} + +static void print_regs_callee(struct callee_regs *regs) +{ + pr_cont("r13: 0x%08lx\tr14: 0x%08lx\n" \ + "r15: 0x%08lx\tr16: 0x%08lx\tr17: 0x%08lx\n" \ + "r18: 0x%08lx\tr19: 0x%08lx\tr20: 0x%08lx\n" \ + "r21: 0x%08lx\tr22: 0x%08lx\tr23: 0x%08lx\n" \ + "r24: 0x%08lx\tr25: 0x%08lx\n", + regs->r13, regs->r14, + regs->r15, regs->r16, regs->r17, + regs->r18, regs->r19, regs->r20, + regs->r21, regs->r22, regs->r23, + regs->r24, regs->r25); +} + +static void print_task_path_n_nm(struct task_struct *tsk) +{ + char *path_nm = NULL; + struct mm_struct *mm; + struct file *exe_file; + char buf[ARC_PATH_MAX]; + + mm = get_task_mm(tsk); + if (!mm) + goto done; + + exe_file = get_mm_exe_file(mm); + mmput(mm); + + if (exe_file) { + path_nm = file_path(exe_file, buf, ARC_PATH_MAX-1); + fput(exe_file); + } + +done: + pr_info("Path: %s\n", !IS_ERR(path_nm) ? path_nm : "?"); +} + +static void show_faulting_vma(unsigned long address) +{ + struct vm_area_struct *vma; + struct mm_struct *active_mm = current->active_mm; + + /* can't use print_vma_addr() yet as it doesn't check for + * non-inclusive vma + */ + mmap_read_lock(active_mm); + vma = vma_lookup(active_mm, address); + + /* Lookup the vma at the address and report if the container VMA is not + * found + */ + if (vma) { + char buf[ARC_PATH_MAX]; + char *nm = "?"; + + if (vma->vm_file) { + nm = file_path(vma->vm_file, buf, ARC_PATH_MAX-1); + if (IS_ERR(nm)) + nm = "?"; + } + pr_info(" @off 0x%lx in [%s] VMA: 0x%08lx to 0x%08lx\n", + vma->vm_start < TASK_UNMAPPED_BASE ? + address : address - vma->vm_start, + nm, vma->vm_start, vma->vm_end); + } else + pr_info(" @No matching VMA found\n"); + + mmap_read_unlock(active_mm); +} + +static void show_ecr_verbose(struct pt_regs *regs) +{ + unsigned int vec, cause_code; + unsigned long address; + + /* For Data fault, this is data address not instruction addr */ + address = current->thread.fault_address; + + vec = regs->ecr.vec; + cause_code = regs->ecr.cause; + + /* For DTLB Miss or ProtV, display the memory involved too */ + if (vec == ECR_V_DTLB_MISS) { + pr_cont("Invalid %s @ 0x%08lx by insn @ %pS\n", + (cause_code == 0x01) ? "Read" : + ((cause_code == 0x02) ? "Write" : "EX"), + address, (void *)regs->ret); + } else if (vec == ECR_V_ITLB_MISS) { + pr_cont("Insn could not be fetched\n"); + } else if (vec == ECR_V_MACH_CHK) { + pr_cont("Machine Check (%s)\n", (cause_code == 0x0) ? + "Double Fault" : "Other Fatal Err"); + + } else if (vec == ECR_V_PROTV) { + if (cause_code == ECR_C_PROTV_INST_FETCH) + pr_cont("Execute from Non-exec Page\n"); + else if (cause_code == ECR_C_PROTV_MISALIG_DATA && + IS_ENABLED(CONFIG_ISA_ARCOMPACT)) + pr_cont("Misaligned r/w from 0x%08lx\n", address); + else + pr_cont("%s access not allowed on page\n", + (cause_code == 0x01) ? "Read" : + ((cause_code == 0x02) ? "Write" : "EX")); + } else if (vec == ECR_V_INSN_ERR) { + pr_cont("Illegal Insn\n"); +#ifdef CONFIG_ISA_ARCV2 + } else if (vec == ECR_V_MEM_ERR) { + if (cause_code == 0x00) + pr_cont("Bus Error from Insn Mem\n"); + else if (cause_code == 0x10) + pr_cont("Bus Error from Data Mem\n"); + else + pr_cont("Bus Error, check PRM\n"); + } else if (vec == ECR_V_MISALIGN) { + pr_cont("Misaligned r/w from 0x%08lx\n", address); +#endif + } else if (vec == ECR_V_TRAP) { + if (regs->ecr.param == 5) + pr_cont("gcc generated __builtin_trap\n"); + } else { + pr_cont("Check Programmer's Manual\n"); + } +} + +/************************************************************************ + * API called by rest of kernel + ***********************************************************************/ + +void show_regs(struct pt_regs *regs) +{ + struct task_struct *tsk = current; + struct callee_regs *cregs = (struct callee_regs *)tsk->thread.callee_reg; + + /* + * generic code calls us with preemption disabled, but some calls + * here could sleep, so re-enable to avoid lockdep splat + */ + preempt_enable(); + + print_task_path_n_nm(tsk); + show_regs_print_info(KERN_INFO); + + show_ecr_verbose(regs); + + if (user_mode(regs)) + show_faulting_vma(regs->ret); /* faulting code, not data */ + + pr_info("ECR: 0x%08lx EFA: 0x%08lx ERET: 0x%08lx\n", + regs->ecr.full, current->thread.fault_address, regs->ret); + + pr_info("STAT32: 0x%08lx", regs->status32); + +#define STS_BIT(r, bit) r->status32 & STATUS_##bit##_MASK ? #bit" " : "" + +#ifdef CONFIG_ISA_ARCOMPACT + pr_cont(" [%2s%2s%2s%2s%2s%2s%2s]", + (regs->status32 & STATUS_U_MASK) ? "U " : "K ", + STS_BIT(regs, DE), STS_BIT(regs, AE), + STS_BIT(regs, A2), STS_BIT(regs, A1), + STS_BIT(regs, E2), STS_BIT(regs, E1)); +#else + pr_cont(" [%2s%2s%2s%2s] ", + STS_BIT(regs, IE), + (regs->status32 & STATUS_U_MASK) ? "U " : "K ", + STS_BIT(regs, DE), STS_BIT(regs, AE)); +#endif + + print_regs_scratch(regs); + if (cregs) + print_regs_callee(cregs); + + preempt_disable(); +} + +void show_kernel_fault_diag(const char *str, struct pt_regs *regs, + unsigned long address) +{ + current->thread.fault_address = address; + + /* Show fault description */ + pr_info("\n%s\n", str); + + /* Caller and Callee regs */ + show_regs(regs); + + /* Show stack trace if this Fatality happened in kernel mode */ + if (!user_mode(regs)) + show_stacktrace(current, regs, KERN_DEFAULT); +} diff --git a/arch/arc/kernel/unaligned.c b/arch/arc/kernel/unaligned.c new file mode 100644 index 0000000000..99a9b92ed9 --- /dev/null +++ b/arch/arc/kernel/unaligned.c @@ -0,0 +1,262 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2011-2012 Synopsys (www.synopsys.com) + * + * vineetg : May 2011 + * -Adapted (from .26 to .35) + * -original contribution by Tim.yao@amlogic.com + */ + +#include <linux/types.h> +#include <linux/perf_event.h> +#include <linux/ptrace.h> +#include <linux/uaccess.h> +#include <asm/disasm.h> + +#ifdef CONFIG_CPU_BIG_ENDIAN +#define BE 1 +#define FIRST_BYTE_16 "swap %1, %1\n swape %1, %1\n" +#define FIRST_BYTE_32 "swape %1, %1\n" +#else +#define BE 0 +#define FIRST_BYTE_16 +#define FIRST_BYTE_32 +#endif + +#define __get8_unaligned_check(val, addr, err) \ + __asm__( \ + "1: ldb.ab %1, [%2, 1]\n" \ + "2:\n" \ + " .section .fixup,\"ax\"\n" \ + " .align 4\n" \ + "3: mov %0, 1\n" \ + " j 2b\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + " .align 4\n" \ + " .long 1b, 3b\n" \ + " .previous\n" \ + : "=r" (err), "=&r" (val), "=r" (addr) \ + : "0" (err), "2" (addr)) + +#define get16_unaligned_check(val, addr) \ + do { \ + unsigned int err = 0, v, a = addr; \ + __get8_unaligned_check(v, a, err); \ + val = v << ((BE) ? 8 : 0); \ + __get8_unaligned_check(v, a, err); \ + val |= v << ((BE) ? 0 : 8); \ + if (err) \ + goto fault; \ + } while (0) + +#define get32_unaligned_check(val, addr) \ + do { \ + unsigned int err = 0, v, a = addr; \ + __get8_unaligned_check(v, a, err); \ + val = v << ((BE) ? 24 : 0); \ + __get8_unaligned_check(v, a, err); \ + val |= v << ((BE) ? 16 : 8); \ + __get8_unaligned_check(v, a, err); \ + val |= v << ((BE) ? 8 : 16); \ + __get8_unaligned_check(v, a, err); \ + val |= v << ((BE) ? 0 : 24); \ + if (err) \ + goto fault; \ + } while (0) + +#define put16_unaligned_check(val, addr) \ + do { \ + unsigned int err = 0, v = val, a = addr;\ + \ + __asm__( \ + FIRST_BYTE_16 \ + "1: stb.ab %1, [%2, 1]\n" \ + " lsr %1, %1, 8\n" \ + "2: stb %1, [%2]\n" \ + "3:\n" \ + " .section .fixup,\"ax\"\n" \ + " .align 4\n" \ + "4: mov %0, 1\n" \ + " j 3b\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + " .align 4\n" \ + " .long 1b, 4b\n" \ + " .long 2b, 4b\n" \ + " .previous\n" \ + : "=r" (err), "=&r" (v), "=&r" (a) \ + : "0" (err), "1" (v), "2" (a)); \ + \ + if (err) \ + goto fault; \ + } while (0) + +#define put32_unaligned_check(val, addr) \ + do { \ + unsigned int err = 0, v = val, a = addr;\ + \ + __asm__( \ + FIRST_BYTE_32 \ + "1: stb.ab %1, [%2, 1]\n" \ + " lsr %1, %1, 8\n" \ + "2: stb.ab %1, [%2, 1]\n" \ + " lsr %1, %1, 8\n" \ + "3: stb.ab %1, [%2, 1]\n" \ + " lsr %1, %1, 8\n" \ + "4: stb %1, [%2]\n" \ + "5:\n" \ + " .section .fixup,\"ax\"\n" \ + " .align 4\n" \ + "6: mov %0, 1\n" \ + " j 5b\n" \ + " .previous\n" \ + " .section __ex_table,\"a\"\n" \ + " .align 4\n" \ + " .long 1b, 6b\n" \ + " .long 2b, 6b\n" \ + " .long 3b, 6b\n" \ + " .long 4b, 6b\n" \ + " .previous\n" \ + : "=r" (err), "=&r" (v), "=&r" (a) \ + : "0" (err), "1" (v), "2" (a)); \ + \ + if (err) \ + goto fault; \ + } while (0) + +/* sysctl hooks */ +int unaligned_enabled __read_mostly = 1; /* Enabled by default */ +int no_unaligned_warning __read_mostly = 1; /* Only 1 warning by default */ + +static void fixup_load(struct disasm_state *state, struct pt_regs *regs, + struct callee_regs *cregs) +{ + int val; + + /* register write back */ + if ((state->aa == 1) || (state->aa == 2)) { + set_reg(state->wb_reg, state->src1 + state->src2, regs, cregs); + + if (state->aa == 2) + state->src2 = 0; + } + + if (state->zz == 0) { + get32_unaligned_check(val, state->src1 + state->src2); + } else { + get16_unaligned_check(val, state->src1 + state->src2); + + if (state->x) + val = (val << 16) >> 16; + } + + if (state->pref == 0) + set_reg(state->dest, val, regs, cregs); + + return; + +fault: state->fault = 1; +} + +static void fixup_store(struct disasm_state *state, struct pt_regs *regs, + struct callee_regs *cregs) +{ + /* register write back */ + if ((state->aa == 1) || (state->aa == 2)) { + set_reg(state->wb_reg, state->src2 + state->src3, regs, cregs); + + if (state->aa == 3) + state->src3 = 0; + } else if (state->aa == 3) { + if (state->zz == 2) { + set_reg(state->wb_reg, state->src2 + (state->src3 << 1), + regs, cregs); + } else if (!state->zz) { + set_reg(state->wb_reg, state->src2 + (state->src3 << 2), + regs, cregs); + } else { + goto fault; + } + } + + /* write fix-up */ + if (!state->zz) + put32_unaligned_check(state->src1, state->src2 + state->src3); + else + put16_unaligned_check(state->src1, state->src2 + state->src3); + + return; + +fault: state->fault = 1; +} + +/* + * Handle an unaligned access + * Returns 0 if successfully handled, 1 if some error happened + */ +int misaligned_fixup(unsigned long address, struct pt_regs *regs, + struct callee_regs *cregs) +{ + struct disasm_state state; + char buf[TASK_COMM_LEN]; + + /* handle user mode only and only if enabled by sysadmin */ + if (!user_mode(regs) || !unaligned_enabled) + return 1; + + if (no_unaligned_warning) { + pr_warn_once("%s(%d) made unaligned access which was emulated" + " by kernel assist\n. This can degrade application" + " performance significantly\n. To enable further" + " logging of such instances, please \n" + " echo 0 > /proc/sys/kernel/ignore-unaligned-usertrap\n", + get_task_comm(buf, current), task_pid_nr(current)); + } else { + /* Add rate limiting if it gets down to it */ + pr_warn("%s(%d): unaligned access to/from 0x%lx by PC: 0x%lx\n", + get_task_comm(buf, current), task_pid_nr(current), + address, regs->ret); + + } + + disasm_instr(regs->ret, &state, 1, regs, cregs); + + if (state.fault) + goto fault; + + /* ldb/stb should not have unaligned exception */ + if ((state.zz == 1) || (state.di)) + goto fault; + + if (!state.write) + fixup_load(&state, regs, cregs); + else + fixup_store(&state, regs, cregs); + + if (state.fault) + goto fault; + + /* clear any remnants of delay slot */ + if (delay_mode(regs)) { + regs->ret = regs->bta & ~1U; + regs->status32 &= ~STATUS_DE_MASK; + } else { + regs->ret += state.instr_len; + + /* handle zero-overhead-loop */ + if ((regs->ret == regs->lp_end) && (regs->lp_count)) { + regs->ret = regs->lp_start; + regs->lp_count--; + } + } + + perf_sw_event(PERF_COUNT_SW_ALIGNMENT_FAULTS, 1, regs, address); + return 0; + +fault: + pr_err("Alignment trap: fault in fix-up %08lx at [<%08lx>]\n", + state.words[0], address); + + return 1; +} diff --git a/arch/arc/kernel/unwind.c b/arch/arc/kernel/unwind.c new file mode 100644 index 0000000000..9270d0a713 --- /dev/null +++ b/arch/arc/kernel/unwind.c @@ -0,0 +1,1315 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * Copyright (C) 2002-2006 Novell, Inc. + * Jan Beulich <jbeulich@novell.com> + * + * A simple API for unwinding kernel stacks. This is used for + * debugging and error reporting purposes. The kernel doesn't need + * full-blown stack unwinding with all the bells and whistles, so there + * is not much point in implementing the full Dwarf2 unwind API. + */ + +#include <linux/sched.h> +#include <linux/module.h> +#include <linux/memblock.h> +#include <linux/sort.h> +#include <linux/slab.h> +#include <linux/stop_machine.h> +#include <linux/uaccess.h> +#include <linux/ptrace.h> +#include <asm/sections.h> +#include <asm/unaligned.h> +#include <asm/unwind.h> + +extern char __start_unwind[], __end_unwind[]; +/* extern const u8 __start_unwind_hdr[], __end_unwind_hdr[];*/ + +/* #define UNWIND_DEBUG */ + +#ifdef UNWIND_DEBUG +int dbg_unw; +#define unw_debug(fmt, ...) \ +do { \ + if (dbg_unw) \ + pr_info(fmt, ##__VA_ARGS__); \ +} while (0); +#else +#define unw_debug(fmt, ...) +#endif + +#define MAX_STACK_DEPTH 8 + +#define EXTRA_INFO(f) { \ + BUILD_BUG_ON_ZERO(offsetof(struct unwind_frame_info, f) \ + % sizeof_field(struct unwind_frame_info, f)) \ + + offsetof(struct unwind_frame_info, f) \ + / sizeof_field(struct unwind_frame_info, f), \ + sizeof_field(struct unwind_frame_info, f) \ + } +#define PTREGS_INFO(f) EXTRA_INFO(regs.f) + +static const struct { + unsigned offs:BITS_PER_LONG / 2; + unsigned width:BITS_PER_LONG / 2; +} reg_info[] = { +UNW_REGISTER_INFO}; + +#undef PTREGS_INFO +#undef EXTRA_INFO + +#ifndef REG_INVALID +#define REG_INVALID(r) (reg_info[r].width == 0) +#endif + +#define DW_CFA_nop 0x00 +#define DW_CFA_set_loc 0x01 +#define DW_CFA_advance_loc1 0x02 +#define DW_CFA_advance_loc2 0x03 +#define DW_CFA_advance_loc4 0x04 +#define DW_CFA_offset_extended 0x05 +#define DW_CFA_restore_extended 0x06 +#define DW_CFA_undefined 0x07 +#define DW_CFA_same_value 0x08 +#define DW_CFA_register 0x09 +#define DW_CFA_remember_state 0x0a +#define DW_CFA_restore_state 0x0b +#define DW_CFA_def_cfa 0x0c +#define DW_CFA_def_cfa_register 0x0d +#define DW_CFA_def_cfa_offset 0x0e +#define DW_CFA_def_cfa_expression 0x0f +#define DW_CFA_expression 0x10 +#define DW_CFA_offset_extended_sf 0x11 +#define DW_CFA_def_cfa_sf 0x12 +#define DW_CFA_def_cfa_offset_sf 0x13 +#define DW_CFA_val_offset 0x14 +#define DW_CFA_val_offset_sf 0x15 +#define DW_CFA_val_expression 0x16 +#define DW_CFA_lo_user 0x1c +#define DW_CFA_GNU_window_save 0x2d +#define DW_CFA_GNU_args_size 0x2e +#define DW_CFA_GNU_negative_offset_extended 0x2f +#define DW_CFA_hi_user 0x3f + +#define DW_EH_PE_FORM 0x07 +#define DW_EH_PE_native 0x00 +#define DW_EH_PE_leb128 0x01 +#define DW_EH_PE_data2 0x02 +#define DW_EH_PE_data4 0x03 +#define DW_EH_PE_data8 0x04 +#define DW_EH_PE_signed 0x08 +#define DW_EH_PE_ADJUST 0x70 +#define DW_EH_PE_abs 0x00 +#define DW_EH_PE_pcrel 0x10 +#define DW_EH_PE_textrel 0x20 +#define DW_EH_PE_datarel 0x30 +#define DW_EH_PE_funcrel 0x40 +#define DW_EH_PE_aligned 0x50 +#define DW_EH_PE_indirect 0x80 +#define DW_EH_PE_omit 0xff + +#define CIE_ID 0 + +typedef unsigned long uleb128_t; +typedef signed long sleb128_t; + +static struct unwind_table { + struct { + unsigned long pc; + unsigned long range; + } core, init; + const void *address; + unsigned long size; + const unsigned char *header; + unsigned long hdrsz; + struct unwind_table *link; + const char *name; +} root_table; + +struct unwind_item { + enum item_location { + Nowhere, + Memory, + Register, + Value + } where; + uleb128_t value; +}; + +struct unwind_state { + uleb128_t loc, org; + const u8 *cieStart, *cieEnd; + uleb128_t codeAlign; + sleb128_t dataAlign; + struct cfa { + uleb128_t reg, offs; + } cfa; + struct unwind_item regs[ARRAY_SIZE(reg_info)]; + unsigned stackDepth:8; + unsigned version:8; + const u8 *label; + const u8 *stack[MAX_STACK_DEPTH]; +}; + +static const struct cfa badCFA = { ARRAY_SIZE(reg_info), 1 }; + +static struct unwind_table *find_table(unsigned long pc) +{ + struct unwind_table *table; + + for (table = &root_table; table; table = table->link) + if ((pc >= table->core.pc + && pc < table->core.pc + table->core.range) + || (pc >= table->init.pc + && pc < table->init.pc + table->init.range)) + break; + + return table; +} + +static unsigned long read_pointer(const u8 **pLoc, + const void *end, signed ptrType); +static void init_unwind_hdr(struct unwind_table *table, + void *(*alloc) (unsigned long)); + +/* + * wrappers for header alloc (vs. calling one vs. other at call site) + * to elide section mismatches warnings + */ +static void *__init unw_hdr_alloc_early(unsigned long sz) +{ + return memblock_alloc_from(sz, sizeof(unsigned int), MAX_DMA_ADDRESS); +} + +static void init_unwind_table(struct unwind_table *table, const char *name, + const void *core_start, unsigned long core_size, + const void *init_start, unsigned long init_size, + const void *table_start, unsigned long table_size, + const u8 *header_start, unsigned long header_size) +{ + table->core.pc = (unsigned long)core_start; + table->core.range = core_size; + table->init.pc = (unsigned long)init_start; + table->init.range = init_size; + table->address = table_start; + table->size = table_size; + /* To avoid the pointer addition with NULL pointer.*/ + if (header_start != NULL) { + const u8 *ptr = header_start + 4; + const u8 *end = header_start + header_size; + /* See if the linker provided table looks valid. */ + if (header_size <= 4 + || header_start[0] != 1 + || (void *)read_pointer(&ptr, end, header_start[1]) + != table_start + || header_start[2] == DW_EH_PE_omit + || read_pointer(&ptr, end, header_start[2]) <= 0 + || header_start[3] == DW_EH_PE_omit) + header_start = NULL; + } + table->hdrsz = header_size; + smp_wmb(); + table->header = header_start; + table->link = NULL; + table->name = name; +} + +void __init arc_unwind_init(void) +{ + init_unwind_table(&root_table, "kernel", _text, _end - _text, NULL, 0, + __start_unwind, __end_unwind - __start_unwind, + NULL, 0); + /*__start_unwind_hdr, __end_unwind_hdr - __start_unwind_hdr);*/ + + init_unwind_hdr(&root_table, unw_hdr_alloc_early); +} + +static const u32 bad_cie, not_fde; +static const u32 *cie_for_fde(const u32 *fde, const struct unwind_table *); +static const u32 *__cie_for_fde(const u32 *fde); +static signed fde_pointer_type(const u32 *cie); + +struct eh_frame_hdr_table_entry { + unsigned long start, fde; +}; + +static int cmp_eh_frame_hdr_table_entries(const void *p1, const void *p2) +{ + const struct eh_frame_hdr_table_entry *e1 = p1; + const struct eh_frame_hdr_table_entry *e2 = p2; + + return (e1->start > e2->start) - (e1->start < e2->start); +} + +static void swap_eh_frame_hdr_table_entries(void *p1, void *p2, int size) +{ + struct eh_frame_hdr_table_entry *e1 = p1; + struct eh_frame_hdr_table_entry *e2 = p2; + + swap(e1->start, e2->start); + swap(e1->fde, e2->fde); +} + +static void init_unwind_hdr(struct unwind_table *table, + void *(*alloc) (unsigned long)) +{ + const u8 *ptr; + unsigned long tableSize = table->size, hdrSize; + unsigned int n; + const u32 *fde; + struct { + u8 version; + u8 eh_frame_ptr_enc; + u8 fde_count_enc; + u8 table_enc; + unsigned long eh_frame_ptr; + unsigned int fde_count; + struct eh_frame_hdr_table_entry table[]; + } __attribute__ ((__packed__)) *header; + + if (table->header) + return; + + if (table->hdrsz) + pr_warn(".eh_frame_hdr for '%s' present but unusable\n", + table->name); + + if (tableSize & (sizeof(*fde) - 1)) + return; + + for (fde = table->address, n = 0; + tableSize > sizeof(*fde) && tableSize - sizeof(*fde) >= *fde; + tableSize -= sizeof(*fde) + *fde, fde += 1 + *fde / sizeof(*fde)) { + const u32 *cie = cie_for_fde(fde, table); + signed ptrType; + + if (cie == ¬_fde) + continue; + if (cie == NULL || cie == &bad_cie) + goto ret_err; + ptrType = fde_pointer_type(cie); + if (ptrType < 0) + goto ret_err; + + ptr = (const u8 *)(fde + 2); + if (!read_pointer(&ptr, (const u8 *)(fde + 1) + *fde, + ptrType)) { + /* FIXME_Rajesh We have 4 instances of null addresses + * instead of the initial loc addr + * return; + */ + WARN(1, "unwinder: FDE->initial_location NULL %p\n", + (const u8 *)(fde + 1) + *fde); + } + ++n; + } + + if (tableSize || !n) + goto ret_err; + + hdrSize = 4 + sizeof(unsigned long) + sizeof(unsigned int) + + 2 * n * sizeof(unsigned long); + + header = alloc(hdrSize); + if (!header) + goto ret_err; + + header->version = 1; + header->eh_frame_ptr_enc = DW_EH_PE_abs | DW_EH_PE_native; + header->fde_count_enc = DW_EH_PE_abs | DW_EH_PE_data4; + header->table_enc = DW_EH_PE_abs | DW_EH_PE_native; + put_unaligned((unsigned long)table->address, &header->eh_frame_ptr); + BUILD_BUG_ON(offsetof(typeof(*header), fde_count) + % __alignof(typeof(header->fde_count))); + header->fde_count = n; + + BUILD_BUG_ON(offsetof(typeof(*header), table) + % __alignof(typeof(*header->table))); + for (fde = table->address, tableSize = table->size, n = 0; + tableSize; + tableSize -= sizeof(*fde) + *fde, fde += 1 + *fde / sizeof(*fde)) { + const u32 *cie = __cie_for_fde(fde); + + if (fde[1] == CIE_ID) + continue; /* this is a CIE */ + ptr = (const u8 *)(fde + 2); + header->table[n].start = read_pointer(&ptr, + (const u8 *)(fde + 1) + + *fde, + fde_pointer_type(cie)); + header->table[n].fde = (unsigned long)fde; + ++n; + } + WARN_ON(n != header->fde_count); + + sort(header->table, + n, + sizeof(*header->table), + cmp_eh_frame_hdr_table_entries, swap_eh_frame_hdr_table_entries); + + table->hdrsz = hdrSize; + smp_wmb(); + table->header = (const void *)header; + return; + +ret_err: + panic("Attention !!! Dwarf FDE parsing errors\n"); +} + +#ifdef CONFIG_MODULES +static void *unw_hdr_alloc(unsigned long sz) +{ + return kmalloc(sz, GFP_KERNEL); +} + +static struct unwind_table *last_table; + +/* Must be called with module_mutex held. */ +void *unwind_add_table(struct module *module, const void *table_start, + unsigned long table_size) +{ + struct unwind_table *table; + struct module_memory *core_text; + struct module_memory *init_text; + + if (table_size <= 0) + return NULL; + + table = kmalloc(sizeof(*table), GFP_KERNEL); + if (!table) + return NULL; + + core_text = &module->mem[MOD_TEXT]; + init_text = &module->mem[MOD_INIT_TEXT]; + + init_unwind_table(table, module->name, core_text->base, core_text->size, + init_text->base, init_text->size, table_start, table_size, NULL, 0); + + init_unwind_hdr(table, unw_hdr_alloc); + +#ifdef UNWIND_DEBUG + unw_debug("Table added for [%s] %lx %lx\n", + module->name, table->core.pc, table->core.range); +#endif + if (last_table) + last_table->link = table; + else + root_table.link = table; + last_table = table; + + return table; +} + +struct unlink_table_info { + struct unwind_table *table; + int init_only; +}; + +static int unlink_table(void *arg) +{ + struct unlink_table_info *info = arg; + struct unwind_table *table = info->table, *prev; + + for (prev = &root_table; prev->link && prev->link != table; + prev = prev->link) + ; + + if (prev->link) { + if (info->init_only) { + table->init.pc = 0; + table->init.range = 0; + info->table = NULL; + } else { + prev->link = table->link; + if (!prev->link) + last_table = prev; + } + } else + info->table = NULL; + + return 0; +} + +/* Must be called with module_mutex held. */ +void unwind_remove_table(void *handle, int init_only) +{ + struct unwind_table *table = handle; + struct unlink_table_info info; + + if (!table || table == &root_table) + return; + + if (init_only && table == last_table) { + table->init.pc = 0; + table->init.range = 0; + return; + } + + info.table = table; + info.init_only = init_only; + + unlink_table(&info); /* XXX: SMP */ + kfree(table->header); + kfree(table); +} + +#endif /* CONFIG_MODULES */ + +static uleb128_t get_uleb128(const u8 **pcur, const u8 *end) +{ + const u8 *cur = *pcur; + uleb128_t value; + unsigned int shift; + + for (shift = 0, value = 0; cur < end; shift += 7) { + if (shift + 7 > 8 * sizeof(value) + && (*cur & 0x7fU) >= (1U << (8 * sizeof(value) - shift))) { + cur = end + 1; + break; + } + value |= (uleb128_t) (*cur & 0x7f) << shift; + if (!(*cur++ & 0x80)) + break; + } + *pcur = cur; + + return value; +} + +static sleb128_t get_sleb128(const u8 **pcur, const u8 *end) +{ + const u8 *cur = *pcur; + sleb128_t value; + unsigned int shift; + + for (shift = 0, value = 0; cur < end; shift += 7) { + if (shift + 7 > 8 * sizeof(value) + && (*cur & 0x7fU) >= (1U << (8 * sizeof(value) - shift))) { + cur = end + 1; + break; + } + value |= (sleb128_t) (*cur & 0x7f) << shift; + if (!(*cur & 0x80)) { + value |= -(*cur++ & 0x40) << shift; + break; + } + } + *pcur = cur; + + return value; +} + +static const u32 *__cie_for_fde(const u32 *fde) +{ + const u32 *cie; + + cie = fde + 1 - fde[1] / sizeof(*fde); + + return cie; +} + +static const u32 *cie_for_fde(const u32 *fde, const struct unwind_table *table) +{ + const u32 *cie; + + if (!*fde || (*fde & (sizeof(*fde) - 1))) + return &bad_cie; + + if (fde[1] == CIE_ID) + return ¬_fde; /* this is a CIE */ + + if ((fde[1] & (sizeof(*fde) - 1))) +/* || fde[1] > (unsigned long)(fde + 1) - (unsigned long)table->address) */ + return NULL; /* this is not a valid FDE */ + + cie = __cie_for_fde(fde); + + if (*cie <= sizeof(*cie) + 4 || *cie >= fde[1] - sizeof(*fde) + || (*cie & (sizeof(*cie) - 1)) + || (cie[1] != CIE_ID)) + return NULL; /* this is not a (valid) CIE */ + return cie; +} + +static unsigned long read_pointer(const u8 **pLoc, const void *end, + signed ptrType) +{ + unsigned long value = 0; + union { + const u8 *p8; + const u16 *p16u; + const s16 *p16s; + const u32 *p32u; + const s32 *p32s; + const unsigned long *pul; + } ptr; + + if (ptrType < 0 || ptrType == DW_EH_PE_omit) + return 0; + ptr.p8 = *pLoc; + switch (ptrType & DW_EH_PE_FORM) { + case DW_EH_PE_data2: + if (end < (const void *)(ptr.p16u + 1)) + return 0; + if (ptrType & DW_EH_PE_signed) + value = get_unaligned((u16 *) ptr.p16s++); + else + value = get_unaligned((u16 *) ptr.p16u++); + break; + case DW_EH_PE_data4: +#ifdef CONFIG_64BIT + if (end < (const void *)(ptr.p32u + 1)) + return 0; + if (ptrType & DW_EH_PE_signed) + value = get_unaligned(ptr.p32s++); + else + value = get_unaligned(ptr.p32u++); + break; + case DW_EH_PE_data8: + BUILD_BUG_ON(sizeof(u64) != sizeof(value)); +#else + BUILD_BUG_ON(sizeof(u32) != sizeof(value)); +#endif + fallthrough; + case DW_EH_PE_native: + if (end < (const void *)(ptr.pul + 1)) + return 0; + value = get_unaligned((unsigned long *)ptr.pul++); + break; + case DW_EH_PE_leb128: + BUILD_BUG_ON(sizeof(uleb128_t) > sizeof(value)); + value = ptrType & DW_EH_PE_signed ? get_sleb128(&ptr.p8, end) + : get_uleb128(&ptr.p8, end); + if ((const void *)ptr.p8 > end) + return 0; + break; + default: + return 0; + } + switch (ptrType & DW_EH_PE_ADJUST) { + case DW_EH_PE_abs: + break; + case DW_EH_PE_pcrel: + value += (unsigned long)*pLoc; + break; + default: + return 0; + } + if ((ptrType & DW_EH_PE_indirect) + && __get_user(value, (unsigned long __user *)value)) + return 0; + *pLoc = ptr.p8; + + return value; +} + +static signed fde_pointer_type(const u32 *cie) +{ + const u8 *ptr = (const u8 *)(cie + 2); + unsigned int version = *ptr; + + if (*++ptr) { + const char *aug; + const u8 *end = (const u8 *)(cie + 1) + *cie; + uleb128_t len; + + /* check if augmentation size is first (and thus present) */ + if (*ptr != 'z') + return -1; + + /* check if augmentation string is nul-terminated */ + aug = (const void *)ptr; + ptr = memchr(aug, 0, end - ptr); + if (ptr == NULL) + return -1; + + ++ptr; /* skip terminator */ + get_uleb128(&ptr, end); /* skip code alignment */ + get_sleb128(&ptr, end); /* skip data alignment */ + /* skip return address column */ + version <= 1 ? (void) ++ptr : (void)get_uleb128(&ptr, end); + len = get_uleb128(&ptr, end); /* augmentation length */ + + if (ptr + len < ptr || ptr + len > end) + return -1; + + end = ptr + len; + while (*++aug) { + if (ptr >= end) + return -1; + switch (*aug) { + case 'L': + ++ptr; + break; + case 'P':{ + signed ptrType = *ptr++; + + if (!read_pointer(&ptr, end, ptrType) + || ptr > end) + return -1; + } + break; + case 'R': + return *ptr; + default: + return -1; + } + } + } + return DW_EH_PE_native | DW_EH_PE_abs; +} + +static int advance_loc(unsigned long delta, struct unwind_state *state) +{ + state->loc += delta * state->codeAlign; + + /* FIXME_Rajesh: Probably we are defining for the initial range as well; + return delta > 0; + */ + unw_debug("delta %3lu => loc 0x%lx: ", delta, state->loc); + return 1; +} + +static void set_rule(uleb128_t reg, enum item_location where, uleb128_t value, + struct unwind_state *state) +{ + if (reg < ARRAY_SIZE(state->regs)) { + state->regs[reg].where = where; + state->regs[reg].value = value; + +#ifdef UNWIND_DEBUG + unw_debug("r%lu: ", reg); + switch (where) { + case Nowhere: + unw_debug("s "); + break; + case Memory: + unw_debug("c(%lu) ", value); + break; + case Register: + unw_debug("r(%lu) ", value); + break; + case Value: + unw_debug("v(%lu) ", value); + break; + default: + break; + } +#endif + } +} + +static int processCFI(const u8 *start, const u8 *end, unsigned long targetLoc, + signed ptrType, struct unwind_state *state) +{ + union { + const u8 *p8; + const u16 *p16; + const u32 *p32; + } ptr; + int result = 1; + u8 opcode; + + if (start != state->cieStart) { + state->loc = state->org; + result = + processCFI(state->cieStart, state->cieEnd, 0, ptrType, + state); + if (targetLoc == 0 && state->label == NULL) + return result; + } + for (ptr.p8 = start; result && ptr.p8 < end;) { + switch (*ptr.p8 >> 6) { + uleb128_t value; + + case 0: + opcode = *ptr.p8++; + + switch (opcode) { + case DW_CFA_nop: + unw_debug("cfa nop "); + break; + case DW_CFA_set_loc: + state->loc = read_pointer(&ptr.p8, end, + ptrType); + if (state->loc == 0) + result = 0; + unw_debug("cfa_set_loc: 0x%lx ", state->loc); + break; + case DW_CFA_advance_loc1: + unw_debug("\ncfa advance loc1:"); + result = ptr.p8 < end + && advance_loc(*ptr.p8++, state); + break; + case DW_CFA_advance_loc2: + value = *ptr.p8++; + value += *ptr.p8++ << 8; + unw_debug("\ncfa advance loc2:"); + result = ptr.p8 <= end + 2 + /* && advance_loc(*ptr.p16++, state); */ + && advance_loc(value, state); + break; + case DW_CFA_advance_loc4: + unw_debug("\ncfa advance loc4:"); + result = ptr.p8 <= end + 4 + && advance_loc(*ptr.p32++, state); + break; + case DW_CFA_offset_extended: + value = get_uleb128(&ptr.p8, end); + unw_debug("cfa_offset_extended: "); + set_rule(value, Memory, + get_uleb128(&ptr.p8, end), state); + break; + case DW_CFA_val_offset: + value = get_uleb128(&ptr.p8, end); + set_rule(value, Value, + get_uleb128(&ptr.p8, end), state); + break; + case DW_CFA_offset_extended_sf: + value = get_uleb128(&ptr.p8, end); + set_rule(value, Memory, + get_sleb128(&ptr.p8, end), state); + break; + case DW_CFA_val_offset_sf: + value = get_uleb128(&ptr.p8, end); + set_rule(value, Value, + get_sleb128(&ptr.p8, end), state); + break; + case DW_CFA_restore_extended: + unw_debug("cfa_restore_extended: "); + case DW_CFA_undefined: + unw_debug("cfa_undefined: "); + case DW_CFA_same_value: + unw_debug("cfa_same_value: "); + set_rule(get_uleb128(&ptr.p8, end), Nowhere, 0, + state); + break; + case DW_CFA_register: + unw_debug("cfa_register: "); + value = get_uleb128(&ptr.p8, end); + set_rule(value, + Register, + get_uleb128(&ptr.p8, end), state); + break; + case DW_CFA_remember_state: + unw_debug("cfa_remember_state: "); + if (ptr.p8 == state->label) { + state->label = NULL; + return 1; + } + if (state->stackDepth >= MAX_STACK_DEPTH) + return 0; + state->stack[state->stackDepth++] = ptr.p8; + break; + case DW_CFA_restore_state: + unw_debug("cfa_restore_state: "); + if (state->stackDepth) { + const uleb128_t loc = state->loc; + const u8 *label = state->label; + + state->label = + state->stack[state->stackDepth - 1]; + memcpy(&state->cfa, &badCFA, + sizeof(state->cfa)); + memset(state->regs, 0, + sizeof(state->regs)); + state->stackDepth = 0; + result = + processCFI(start, end, 0, ptrType, + state); + state->loc = loc; + state->label = label; + } else + return 0; + break; + case DW_CFA_def_cfa: + state->cfa.reg = get_uleb128(&ptr.p8, end); + unw_debug("cfa_def_cfa: r%lu ", state->cfa.reg); + fallthrough; + case DW_CFA_def_cfa_offset: + state->cfa.offs = get_uleb128(&ptr.p8, end); + unw_debug("cfa_def_cfa_offset: 0x%lx ", + state->cfa.offs); + break; + case DW_CFA_def_cfa_sf: + state->cfa.reg = get_uleb128(&ptr.p8, end); + fallthrough; + case DW_CFA_def_cfa_offset_sf: + state->cfa.offs = get_sleb128(&ptr.p8, end) + * state->dataAlign; + break; + case DW_CFA_def_cfa_register: + unw_debug("cfa_def_cfa_register: "); + state->cfa.reg = get_uleb128(&ptr.p8, end); + break; + /*todo case DW_CFA_def_cfa_expression: */ + /*todo case DW_CFA_expression: */ + /*todo case DW_CFA_val_expression: */ + case DW_CFA_GNU_args_size: + get_uleb128(&ptr.p8, end); + break; + case DW_CFA_GNU_negative_offset_extended: + value = get_uleb128(&ptr.p8, end); + set_rule(value, + Memory, + (uleb128_t) 0 - get_uleb128(&ptr.p8, + end), + state); + break; + case DW_CFA_GNU_window_save: + default: + unw_debug("UNKNOWN OPCODE 0x%x\n", opcode); + result = 0; + break; + } + break; + case 1: + unw_debug("\ncfa_adv_loc: "); + result = advance_loc(*ptr.p8++ & 0x3f, state); + break; + case 2: + unw_debug("cfa_offset: "); + value = *ptr.p8++ & 0x3f; + set_rule(value, Memory, get_uleb128(&ptr.p8, end), + state); + break; + case 3: + unw_debug("cfa_restore: "); + set_rule(*ptr.p8++ & 0x3f, Nowhere, 0, state); + break; + } + + if (ptr.p8 > end) + result = 0; + if (result && targetLoc != 0 && targetLoc < state->loc) + return 1; + } + + return result && ptr.p8 == end && (targetLoc == 0 || ( + /*todo While in theory this should apply, gcc in practice omits + everything past the function prolog, and hence the location + never reaches the end of the function. + targetLoc < state->loc && */ state->label == NULL)); +} + +/* Unwind to previous to frame. Returns 0 if successful, negative + * number in case of an error. */ +int arc_unwind(struct unwind_frame_info *frame) +{ +#define FRAME_REG(r, t) (((t *)frame)[reg_info[r].offs]) + const u32 *fde = NULL, *cie = NULL; + const u8 *ptr = NULL, *end = NULL; + unsigned long pc = UNW_PC(frame) - frame->call_frame; + unsigned long startLoc = 0, endLoc = 0, cfa; + unsigned int i; + signed ptrType = -1; + uleb128_t retAddrReg = 0; + const struct unwind_table *table; + struct unwind_state state; + unsigned long *fptr; + unsigned long addr; + + unw_debug("\n\nUNWIND FRAME:\n"); + unw_debug("PC: 0x%lx BLINK: 0x%lx, SP: 0x%lx, FP: 0x%x\n", + UNW_PC(frame), UNW_BLINK(frame), UNW_SP(frame), + UNW_FP(frame)); + + if (UNW_PC(frame) == 0) + return -EINVAL; + +#ifdef UNWIND_DEBUG + { + unsigned long *sptr = (unsigned long *)UNW_SP(frame); + unw_debug("\nStack Dump:\n"); + for (i = 0; i < 20; i++, sptr++) + unw_debug("0x%p: 0x%lx\n", sptr, *sptr); + unw_debug("\n"); + } +#endif + + table = find_table(pc); + if (table != NULL + && !(table->size & (sizeof(*fde) - 1))) { + const u8 *hdr = table->header; + unsigned long tableSize; + + smp_rmb(); + if (hdr && hdr[0] == 1) { + switch (hdr[3] & DW_EH_PE_FORM) { + case DW_EH_PE_native: + tableSize = sizeof(unsigned long); + break; + case DW_EH_PE_data2: + tableSize = 2; + break; + case DW_EH_PE_data4: + tableSize = 4; + break; + case DW_EH_PE_data8: + tableSize = 8; + break; + default: + tableSize = 0; + break; + } + ptr = hdr + 4; + end = hdr + table->hdrsz; + if (tableSize && read_pointer(&ptr, end, hdr[1]) + == (unsigned long)table->address + && (i = read_pointer(&ptr, end, hdr[2])) > 0 + && i == (end - ptr) / (2 * tableSize) + && !((end - ptr) % (2 * tableSize))) { + do { + const u8 *cur = + ptr + (i / 2) * (2 * tableSize); + + startLoc = read_pointer(&cur, + cur + tableSize, + hdr[3]); + if (pc < startLoc) + i /= 2; + else { + ptr = cur - tableSize; + i = (i + 1) / 2; + } + } while (startLoc && i > 1); + if (i == 1 + && (startLoc = read_pointer(&ptr, + ptr + tableSize, + hdr[3])) != 0 + && pc >= startLoc) + fde = (void *)read_pointer(&ptr, + ptr + + tableSize, + hdr[3]); + } + } + + if (fde != NULL) { + cie = cie_for_fde(fde, table); + ptr = (const u8 *)(fde + 2); + if (cie != NULL + && cie != &bad_cie + && cie != ¬_fde + && (ptrType = fde_pointer_type(cie)) >= 0 + && read_pointer(&ptr, + (const u8 *)(fde + 1) + *fde, + ptrType) == startLoc) { + if (!(ptrType & DW_EH_PE_indirect)) + ptrType &= + DW_EH_PE_FORM | DW_EH_PE_signed; + endLoc = + startLoc + read_pointer(&ptr, + (const u8 *)(fde + + 1) + + *fde, ptrType); + if (pc >= endLoc) { + fde = NULL; + cie = NULL; + } + } else { + fde = NULL; + cie = NULL; + } + } + } + if (cie != NULL) { + memset(&state, 0, sizeof(state)); + state.cieEnd = ptr; /* keep here temporarily */ + ptr = (const u8 *)(cie + 2); + end = (const u8 *)(cie + 1) + *cie; + frame->call_frame = 1; + if (*++ptr) { + /* check if augmentation size is first (thus present) */ + if (*ptr == 'z') { + while (++ptr < end && *ptr) { + switch (*ptr) { + /* chk for ignorable or already handled + * nul-terminated augmentation string */ + case 'L': + case 'P': + case 'R': + continue; + case 'S': + frame->call_frame = 0; + continue; + default: + break; + } + break; + } + } + if (ptr >= end || *ptr) + cie = NULL; + } + ++ptr; + } + if (cie != NULL) { + /* get code alignment factor */ + state.codeAlign = get_uleb128(&ptr, end); + /* get data alignment factor */ + state.dataAlign = get_sleb128(&ptr, end); + if (state.codeAlign == 0 || state.dataAlign == 0 || ptr >= end) + cie = NULL; + else { + retAddrReg = + state.version <= 1 ? *ptr++ : get_uleb128(&ptr, + end); + unw_debug("CIE Frame Info:\n"); + unw_debug("return Address register 0x%lx\n", + retAddrReg); + unw_debug("data Align: %ld\n", state.dataAlign); + unw_debug("code Align: %lu\n", state.codeAlign); + /* skip augmentation */ + if (((const char *)(cie + 2))[1] == 'z') { + uleb128_t augSize = get_uleb128(&ptr, end); + + ptr += augSize; + } + if (ptr > end || retAddrReg >= ARRAY_SIZE(reg_info) + || REG_INVALID(retAddrReg) + || reg_info[retAddrReg].width != + sizeof(unsigned long)) + cie = NULL; + } + } + if (cie != NULL) { + state.cieStart = ptr; + ptr = state.cieEnd; + state.cieEnd = end; + end = (const u8 *)(fde + 1) + *fde; + /* skip augmentation */ + if (((const char *)(cie + 2))[1] == 'z') { + uleb128_t augSize = get_uleb128(&ptr, end); + + if ((ptr += augSize) > end) + fde = NULL; + } + } + if (cie == NULL || fde == NULL) { +#ifdef CONFIG_FRAME_POINTER + unsigned long top, bottom; + + top = STACK_TOP_UNW(frame->task); + bottom = STACK_BOTTOM_UNW(frame->task); +#if FRAME_RETADDR_OFFSET < 0 + if (UNW_SP(frame) < top && UNW_FP(frame) <= UNW_SP(frame) + && bottom < UNW_FP(frame) +#else + if (UNW_SP(frame) > top && UNW_FP(frame) >= UNW_SP(frame) + && bottom > UNW_FP(frame) +#endif + && !((UNW_SP(frame) | UNW_FP(frame)) + & (sizeof(unsigned long) - 1))) { + unsigned long link; + + if (!__get_user(link, (unsigned long *) + (UNW_FP(frame) + FRAME_LINK_OFFSET)) +#if FRAME_RETADDR_OFFSET < 0 + && link > bottom && link < UNW_FP(frame) +#else + && link > UNW_FP(frame) && link < bottom +#endif + && !(link & (sizeof(link) - 1)) + && !__get_user(UNW_PC(frame), + (unsigned long *)(UNW_FP(frame) + + FRAME_RETADDR_OFFSET))) + { + UNW_SP(frame) = + UNW_FP(frame) + FRAME_RETADDR_OFFSET +#if FRAME_RETADDR_OFFSET < 0 + - +#else + + +#endif + sizeof(UNW_PC(frame)); + UNW_FP(frame) = link; + return 0; + } + } +#endif + return -ENXIO; + } + state.org = startLoc; + memcpy(&state.cfa, &badCFA, sizeof(state.cfa)); + + unw_debug("\nProcess instructions\n"); + + /* process instructions + * For ARC, we optimize by having blink(retAddrReg) with + * the sameValue in the leaf function, so we should not check + * state.regs[retAddrReg].where == Nowhere + */ + if (!processCFI(ptr, end, pc, ptrType, &state) + || state.loc > endLoc +/* || state.regs[retAddrReg].where == Nowhere */ + || state.cfa.reg >= ARRAY_SIZE(reg_info) + || reg_info[state.cfa.reg].width != sizeof(unsigned long) + || state.cfa.offs % sizeof(unsigned long)) + return -EIO; + +#ifdef UNWIND_DEBUG + unw_debug("\n"); + + unw_debug("\nRegister State Based on the rules parsed from FDE:\n"); + for (i = 0; i < ARRAY_SIZE(state.regs); ++i) { + + if (REG_INVALID(i)) + continue; + + switch (state.regs[i].where) { + case Nowhere: + break; + case Memory: + unw_debug(" r%d: c(%lu),", i, state.regs[i].value); + break; + case Register: + unw_debug(" r%d: r(%lu),", i, state.regs[i].value); + break; + case Value: + unw_debug(" r%d: v(%lu),", i, state.regs[i].value); + break; + } + } + + unw_debug("\n"); +#endif + + /* update frame */ + if (frame->call_frame + && !UNW_DEFAULT_RA(state.regs[retAddrReg], state.dataAlign)) + frame->call_frame = 0; + cfa = FRAME_REG(state.cfa.reg, unsigned long) + state.cfa.offs; + startLoc = min_t(unsigned long, UNW_SP(frame), cfa); + endLoc = max_t(unsigned long, UNW_SP(frame), cfa); + if (STACK_LIMIT(startLoc) != STACK_LIMIT(endLoc)) { + startLoc = min(STACK_LIMIT(cfa), cfa); + endLoc = max(STACK_LIMIT(cfa), cfa); + } + + unw_debug("\nCFA reg: 0x%lx, offset: 0x%lx => 0x%lx\n", + state.cfa.reg, state.cfa.offs, cfa); + + for (i = 0; i < ARRAY_SIZE(state.regs); ++i) { + if (REG_INVALID(i)) { + if (state.regs[i].where == Nowhere) + continue; + return -EIO; + } + switch (state.regs[i].where) { + default: + break; + case Register: + if (state.regs[i].value >= ARRAY_SIZE(reg_info) + || REG_INVALID(state.regs[i].value) + || reg_info[i].width > + reg_info[state.regs[i].value].width) + return -EIO; + switch (reg_info[state.regs[i].value].width) { + case sizeof(u8): + state.regs[i].value = + FRAME_REG(state.regs[i].value, const u8); + break; + case sizeof(u16): + state.regs[i].value = + FRAME_REG(state.regs[i].value, const u16); + break; + case sizeof(u32): + state.regs[i].value = + FRAME_REG(state.regs[i].value, const u32); + break; +#ifdef CONFIG_64BIT + case sizeof(u64): + state.regs[i].value = + FRAME_REG(state.regs[i].value, const u64); + break; +#endif + default: + return -EIO; + } + break; + } + } + + unw_debug("\nRegister state after evaluation with realtime Stack:\n"); + fptr = (unsigned long *)(&frame->regs); + for (i = 0; i < ARRAY_SIZE(state.regs); ++i, fptr++) { + + if (REG_INVALID(i)) + continue; + switch (state.regs[i].where) { + case Nowhere: + if (reg_info[i].width != sizeof(UNW_SP(frame)) + || &FRAME_REG(i, __typeof__(UNW_SP(frame))) + != &UNW_SP(frame)) + continue; + UNW_SP(frame) = cfa; + break; + case Register: + switch (reg_info[i].width) { + case sizeof(u8): + FRAME_REG(i, u8) = state.regs[i].value; + break; + case sizeof(u16): + FRAME_REG(i, u16) = state.regs[i].value; + break; + case sizeof(u32): + FRAME_REG(i, u32) = state.regs[i].value; + break; +#ifdef CONFIG_64BIT + case sizeof(u64): + FRAME_REG(i, u64) = state.regs[i].value; + break; +#endif + default: + return -EIO; + } + break; + case Value: + if (reg_info[i].width != sizeof(unsigned long)) + return -EIO; + FRAME_REG(i, unsigned long) = cfa + state.regs[i].value + * state.dataAlign; + break; + case Memory: + addr = cfa + state.regs[i].value * state.dataAlign; + + if ((state.regs[i].value * state.dataAlign) + % sizeof(unsigned long) + || addr < startLoc + || addr + sizeof(unsigned long) < addr + || addr + sizeof(unsigned long) > endLoc) + return -EIO; + + switch (reg_info[i].width) { + case sizeof(u8): + __get_user(FRAME_REG(i, u8), + (u8 __user *)addr); + break; + case sizeof(u16): + __get_user(FRAME_REG(i, u16), + (u16 __user *)addr); + break; + case sizeof(u32): + __get_user(FRAME_REG(i, u32), + (u32 __user *)addr); + break; +#ifdef CONFIG_64BIT + case sizeof(u64): + __get_user(FRAME_REG(i, u64), + (u64 __user *)addr); + break; +#endif + default: + return -EIO; + } + + break; + } + unw_debug("r%d: 0x%lx ", i, *fptr); + } + + return 0; +#undef FRAME_REG +} +EXPORT_SYMBOL(arc_unwind); diff --git a/arch/arc/kernel/vmlinux.lds.S b/arch/arc/kernel/vmlinux.lds.S new file mode 100644 index 0000000000..549c3f4079 --- /dev/null +++ b/arch/arc/kernel/vmlinux.lds.S @@ -0,0 +1,155 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#include <asm-generic/vmlinux.lds.h> +#include <asm/cache.h> +#include <asm/page.h> +#include <asm/thread_info.h> + +OUTPUT_ARCH(arc) +ENTRY(res_service) + +#ifdef CONFIG_CPU_BIG_ENDIAN +jiffies = jiffies_64 + 4; +#else +jiffies = jiffies_64; +#endif + +SECTIONS +{ + /* + * ICCM starts at 0x8000_0000. So if kernel is relocated to some other + * address, make sure peripheral at 0x8z doesn't clash with ICCM + * Essentially vector is also in ICCM. + */ + + . = CONFIG_LINUX_LINK_BASE; + + _int_vec_base_lds = .; + .vector : { + *(.vector) + . = ALIGN(PAGE_SIZE); + } + +#ifdef CONFIG_ARC_HAS_ICCM + .text.arcfp : { + *(.text.arcfp) + . = ALIGN(CONFIG_ARC_ICCM_SZ * 1024); + } +#endif + + /* + * The reason for having a seperate subsection .init.ramfs is to + * prevent objump from including it in kernel dumps + * + * Reason for having .init.ramfs above .init is to make sure that the + * binary blob is tucked away to one side, reducing the displacement + * between .init.text and .text, avoiding any possible relocation + * errors because of calls from .init.text to .text + * Yes such calls do exist. e.g. + * decompress_inflate.c:gunzip( ) -> zlib_inflate_workspace( ) + */ + + __init_begin = .; + + .init.ramfs : { INIT_RAM_FS } + + . = ALIGN(PAGE_SIZE); + + HEAD_TEXT_SECTION + INIT_TEXT_SECTION(L1_CACHE_BYTES) + + /* INIT_DATA_SECTION open-coded: special INIT_RAM_FS handling */ + .init.data : { + INIT_DATA + INIT_SETUP(L1_CACHE_BYTES) + INIT_CALLS + CON_INITCALL + } + + .init.arch.info : { + __arch_info_begin = .; + *(.arch.info.init) + __arch_info_end = .; + } + + PERCPU_SECTION(L1_CACHE_BYTES) + + . = ALIGN(PAGE_SIZE); + __init_end = .; + + .text : { + _text = .; + _stext = .; + TEXT_TEXT + SCHED_TEXT + LOCK_TEXT + KPROBES_TEXT + IRQENTRY_TEXT + SOFTIRQENTRY_TEXT + *(.fixup) + *(.gnu.warning) + } + EXCEPTION_TABLE(L1_CACHE_BYTES) + _etext = .; + + _sdata = .; + RO_DATA(PAGE_SIZE) + + /* + * 1. this is .data essentially + * 2. THREAD_SIZE for init.task, must be kernel-stk sz aligned + */ + RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE) + + _edata = .; + + BSS_SECTION(4, 4, 4) + +#ifdef CONFIG_ARC_DW2_UNWIND + . = ALIGN(PAGE_SIZE); + .eh_frame : { + __start_unwind = .; + *(.eh_frame) + __end_unwind = .; + } +#else + /DISCARD/ : { *(.eh_frame) } +#endif + + . = ALIGN(PAGE_SIZE); + _end = . ; + + STABS_DEBUG + ELF_DETAILS + DISCARDS + + .arcextmap 0 : { + *(.gnu.linkonce.arcextmap.*) + *(.arcextmap.*) + } + +#ifndef CONFIG_DEBUG_INFO + /DISCARD/ : { *(.debug_frame) } + /DISCARD/ : { *(.debug_aranges) } + /DISCARD/ : { *(.debug_pubnames) } + /DISCARD/ : { *(.debug_info) } + /DISCARD/ : { *(.debug_abbrev) } + /DISCARD/ : { *(.debug_line) } + /DISCARD/ : { *(.debug_str) } + /DISCARD/ : { *(.debug_loc) } + /DISCARD/ : { *(.debug_macinfo) } + /DISCARD/ : { *(.debug_ranges) } +#endif + +#ifdef CONFIG_ARC_HAS_DCCM + . = CONFIG_ARC_DCCM_BASE; + __arc_dccm_base = .; + .data.arcfp : { + *(.data.arcfp) + } + . = ALIGN(CONFIG_ARC_DCCM_SZ * 1024); +#endif +} diff --git a/arch/arc/lib/Makefile b/arch/arc/lib/Makefile new file mode 100644 index 0000000000..30158ae69f --- /dev/null +++ b/arch/arc/lib/Makefile @@ -0,0 +1,15 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) +# + +lib-y := strchr-700.o strcpy-700.o strlen.o memcmp.o + +lib-$(CONFIG_ISA_ARCOMPACT) += memcpy-700.o memset.o strcmp.o +lib-$(CONFIG_ISA_ARCV2) += memset-archs.o strcmp-archs.o + +ifdef CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS +lib-$(CONFIG_ISA_ARCV2) +=memcpy-archs-unaligned.o +else +lib-$(CONFIG_ISA_ARCV2) +=memcpy-archs.o +endif diff --git a/arch/arc/lib/memcmp.S b/arch/arc/lib/memcmp.S new file mode 100644 index 0000000000..d6dc5e9bc4 --- /dev/null +++ b/arch/arc/lib/memcmp.S @@ -0,0 +1,149 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#include <linux/linkage.h> + +#ifdef __LITTLE_ENDIAN__ +#define WORD2 r2 +#define SHIFT r3 +#else /* BIG ENDIAN */ +#define WORD2 r3 +#define SHIFT r2 +#endif + +ENTRY_CFI(memcmp) + or r12,r0,r1 + asl_s r12,r12,30 + sub r3,r2,1 + brls r2,r12,.Lbytewise + ld r4,[r0,0] + ld r5,[r1,0] + lsr.f lp_count,r3,3 +#ifdef CONFIG_ISA_ARCV2 + /* In ARCv2 a branch can't be the last instruction in a zero overhead + * loop. + * So we move the branch to the start of the loop, duplicate it + * after the end, and set up r12 so that the branch isn't taken + * initially. + */ + mov_s r12,WORD2 + lpne .Loop_end + brne WORD2,r12,.Lodd + ld WORD2,[r0,4] +#else + lpne .Loop_end + ld_s WORD2,[r0,4] +#endif + ld_s r12,[r1,4] + brne r4,r5,.Leven + ld.a r4,[r0,8] + ld.a r5,[r1,8] +#ifdef CONFIG_ISA_ARCV2 +.Loop_end: + brne WORD2,r12,.Lodd +#else + brne WORD2,r12,.Lodd +.Loop_end: +#endif + asl_s SHIFT,SHIFT,3 + bhs_s .Last_cmp + brne r4,r5,.Leven + ld r4,[r0,4] + ld r5,[r1,4] +#ifdef __LITTLE_ENDIAN__ + nop_s + ; one more load latency cycle +.Last_cmp: + xor r0,r4,r5 + bset r0,r0,SHIFT + sub_s r1,r0,1 + bic_s r1,r1,r0 + norm r1,r1 + b.d .Leven_cmp + and r1,r1,24 +.Leven: + xor r0,r4,r5 + sub_s r1,r0,1 + bic_s r1,r1,r0 + norm r1,r1 + ; slow track insn + and r1,r1,24 +.Leven_cmp: + asl r2,r4,r1 + asl r12,r5,r1 + lsr_s r2,r2,1 + lsr_s r12,r12,1 + j_s.d [blink] + sub r0,r2,r12 + .balign 4 +.Lodd: + xor r0,WORD2,r12 + sub_s r1,r0,1 + bic_s r1,r1,r0 + norm r1,r1 + ; slow track insn + and r1,r1,24 + asl_s r2,r2,r1 + asl_s r12,r12,r1 + lsr_s r2,r2,1 + lsr_s r12,r12,1 + j_s.d [blink] + sub r0,r2,r12 +#else /* BIG ENDIAN */ +.Last_cmp: + neg_s SHIFT,SHIFT + lsr r4,r4,SHIFT + lsr r5,r5,SHIFT + ; slow track insn +.Leven: + sub.f r0,r4,r5 + mov.ne r0,1 + j_s.d [blink] + bset.cs r0,r0,31 +.Lodd: + cmp_s WORD2,r12 + mov_s r0,1 + j_s.d [blink] + bset.cs r0,r0,31 +#endif /* ENDIAN */ + .balign 4 +.Lbytewise: + breq r2,0,.Lnil + ldb r4,[r0,0] + ldb r5,[r1,0] + lsr.f lp_count,r3 +#ifdef CONFIG_ISA_ARCV2 + mov r12,r3 + lpne .Lbyte_end + brne r3,r12,.Lbyte_odd +#else + lpne .Lbyte_end +#endif + ldb_s r3,[r0,1] + ldb r12,[r1,1] + brne r4,r5,.Lbyte_even + ldb.a r4,[r0,2] + ldb.a r5,[r1,2] +#ifdef CONFIG_ISA_ARCV2 +.Lbyte_end: + brne r3,r12,.Lbyte_odd +#else + brne r3,r12,.Lbyte_odd +.Lbyte_end: +#endif + bcc .Lbyte_even + brne r4,r5,.Lbyte_even + ldb_s r3,[r0,1] + ldb_s r12,[r1,1] +.Lbyte_odd: + j_s.d [blink] + sub r0,r3,r12 +.Lbyte_even: + j_s.d [blink] + sub r0,r4,r5 +.Lnil: + j_s.d [blink] + mov r0,0 +END_CFI(memcmp) diff --git a/arch/arc/lib/memcpy-700.S b/arch/arc/lib/memcpy-700.S new file mode 100644 index 0000000000..f2e239e219 --- /dev/null +++ b/arch/arc/lib/memcpy-700.S @@ -0,0 +1,63 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#include <linux/linkage.h> + +ENTRY_CFI(memcpy) + or r3,r0,r1 + asl_s r3,r3,30 + mov_s r5,r0 + brls.d r2,r3,.Lcopy_bytewise + sub.f r3,r2,1 + ld_s r12,[r1,0] + asr.f lp_count,r3,3 + bbit0.d r3,2,.Lnox4 + bmsk_s r2,r2,1 + st.ab r12,[r5,4] + ld.a r12,[r1,4] +.Lnox4: + lppnz .Lendloop + ld_s r3,[r1,4] + st.ab r12,[r5,4] + ld.a r12,[r1,8] + st.ab r3,[r5,4] +.Lendloop: + breq r2,0,.Last_store + ld r3,[r5,0] +#ifdef __LITTLE_ENDIAN__ + add3 r2,-1,r2 + ; uses long immediate + xor_s r12,r12,r3 + bmsk r12,r12,r2 + xor_s r12,r12,r3 +#else /* BIG ENDIAN */ + sub3 r2,31,r2 + ; uses long immediate + xor_s r3,r3,r12 + bmsk r3,r3,r2 + xor_s r12,r12,r3 +#endif /* ENDIAN */ +.Last_store: + j_s.d [blink] + st r12,[r5,0] + + .balign 4 +.Lcopy_bytewise: + jcs [blink] + ldb_s r12,[r1,0] + lsr.f lp_count,r3 + bhs_s .Lnox1 + stb.ab r12,[r5,1] + ldb.a r12,[r1,1] +.Lnox1: + lppnz .Lendbloop + ldb_s r3,[r1,1] + stb.ab r12,[r5,1] + ldb.a r12,[r1,2] + stb.ab r3,[r5,1] +.Lendbloop: + j_s.d [blink] + stb r12,[r5,0] +END_CFI(memcpy) diff --git a/arch/arc/lib/memcpy-archs-unaligned.S b/arch/arc/lib/memcpy-archs-unaligned.S new file mode 100644 index 0000000000..28993a73fd --- /dev/null +++ b/arch/arc/lib/memcpy-archs-unaligned.S @@ -0,0 +1,47 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * ARCv2 memcpy implementation optimized for unaligned memory access using. + * + * Copyright (C) 2019 Synopsys + * Author: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> + */ + +#include <linux/linkage.h> + +#ifdef CONFIG_ARC_HAS_LL64 +# define LOADX(DST,RX) ldd.ab DST, [RX, 8] +# define STOREX(SRC,RX) std.ab SRC, [RX, 8] +# define ZOLSHFT 5 +# define ZOLAND 0x1F +#else +# define LOADX(DST,RX) ld.ab DST, [RX, 4] +# define STOREX(SRC,RX) st.ab SRC, [RX, 4] +# define ZOLSHFT 4 +# define ZOLAND 0xF +#endif + +ENTRY_CFI(memcpy) + mov r3, r0 ; don;t clobber ret val + + lsr.f lp_count, r2, ZOLSHFT + lpnz @.Lcopy32_64bytes + ;; LOOP START + LOADX (r6, r1) + LOADX (r8, r1) + LOADX (r10, r1) + LOADX (r4, r1) + STOREX (r6, r3) + STOREX (r8, r3) + STOREX (r10, r3) + STOREX (r4, r3) +.Lcopy32_64bytes: + + and.f lp_count, r2, ZOLAND ;Last remaining 31 bytes + lpnz @.Lcopyremainingbytes + ;; LOOP START + ldb.ab r5, [r1, 1] + stb.ab r5, [r3, 1] +.Lcopyremainingbytes: + + j [blink] +END_CFI(memcpy) diff --git a/arch/arc/lib/memcpy-archs.S b/arch/arc/lib/memcpy-archs.S new file mode 100644 index 0000000000..0051a84f60 --- /dev/null +++ b/arch/arc/lib/memcpy-archs.S @@ -0,0 +1,219 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) + */ + +#include <linux/linkage.h> + +#ifdef __LITTLE_ENDIAN__ +# define SHIFT_1(RX,RY,IMM) asl RX, RY, IMM ; << +# define SHIFT_2(RX,RY,IMM) lsr RX, RY, IMM ; >> +# define MERGE_1(RX,RY,IMM) asl RX, RY, IMM +# define MERGE_2(RX,RY,IMM) +# define EXTRACT_1(RX,RY,IMM) and RX, RY, 0xFFFF +# define EXTRACT_2(RX,RY,IMM) lsr RX, RY, IMM +#else +# define SHIFT_1(RX,RY,IMM) lsr RX, RY, IMM ; >> +# define SHIFT_2(RX,RY,IMM) asl RX, RY, IMM ; << +# define MERGE_1(RX,RY,IMM) asl RX, RY, IMM ; << +# define MERGE_2(RX,RY,IMM) asl RX, RY, IMM ; << +# define EXTRACT_1(RX,RY,IMM) lsr RX, RY, IMM +# define EXTRACT_2(RX,RY,IMM) lsr RX, RY, 0x08 +#endif + +#ifdef CONFIG_ARC_HAS_LL64 +# define LOADX(DST,RX) ldd.ab DST, [RX, 8] +# define STOREX(SRC,RX) std.ab SRC, [RX, 8] +# define ZOLSHFT 5 +# define ZOLAND 0x1F +#else +# define LOADX(DST,RX) ld.ab DST, [RX, 4] +# define STOREX(SRC,RX) st.ab SRC, [RX, 4] +# define ZOLSHFT 4 +# define ZOLAND 0xF +#endif + +ENTRY_CFI(memcpy) + mov.f 0, r2 +;;; if size is zero + jz.d [blink] + mov r3, r0 ; don;t clobber ret val + +;;; if size <= 8 + cmp r2, 8 + bls.d @.Lsmallchunk + mov.f lp_count, r2 + + and.f r4, r0, 0x03 + rsub lp_count, r4, 4 + lpnz @.Laligndestination + ;; LOOP BEGIN + ldb.ab r5, [r1,1] + sub r2, r2, 1 + stb.ab r5, [r3,1] +.Laligndestination: + +;;; Check the alignment of the source + and.f r4, r1, 0x03 + bnz.d @.Lsourceunaligned + +;;; CASE 0: Both source and destination are 32bit aligned +;;; Convert len to Dwords, unfold x4 + lsr.f lp_count, r2, ZOLSHFT + lpnz @.Lcopy32_64bytes + ;; LOOP START + LOADX (r6, r1) + LOADX (r8, r1) + LOADX (r10, r1) + LOADX (r4, r1) + STOREX (r6, r3) + STOREX (r8, r3) + STOREX (r10, r3) + STOREX (r4, r3) +.Lcopy32_64bytes: + + and.f lp_count, r2, ZOLAND ;Last remaining 31 bytes +.Lsmallchunk: + lpnz @.Lcopyremainingbytes + ;; LOOP START + ldb.ab r5, [r1,1] + stb.ab r5, [r3,1] +.Lcopyremainingbytes: + + j [blink] +;;; END CASE 0 + +.Lsourceunaligned: + cmp r4, 2 + beq.d @.LunalignedOffby2 + sub r2, r2, 1 + + bhi.d @.LunalignedOffby3 + ldb.ab r5, [r1, 1] + +;;; CASE 1: The source is unaligned, off by 1 + ;; Hence I need to read 1 byte for a 16bit alignment + ;; and 2bytes to reach 32bit alignment + ldh.ab r6, [r1, 2] + sub r2, r2, 2 + ;; Convert to words, unfold x2 + lsr.f lp_count, r2, 3 + MERGE_1 (r6, r6, 8) + MERGE_2 (r5, r5, 24) + or r5, r5, r6 + + ;; Both src and dst are aligned + lpnz @.Lcopy8bytes_1 + ;; LOOP START + ld.ab r6, [r1, 4] + ld.ab r8, [r1,4] + + SHIFT_1 (r7, r6, 24) + or r7, r7, r5 + SHIFT_2 (r5, r6, 8) + + SHIFT_1 (r9, r8, 24) + or r9, r9, r5 + SHIFT_2 (r5, r8, 8) + + st.ab r7, [r3, 4] + st.ab r9, [r3, 4] +.Lcopy8bytes_1: + + ;; Write back the remaining 16bits + EXTRACT_1 (r6, r5, 16) + sth.ab r6, [r3, 2] + ;; Write back the remaining 8bits + EXTRACT_2 (r5, r5, 16) + stb.ab r5, [r3, 1] + + and.f lp_count, r2, 0x07 ;Last 8bytes + lpnz @.Lcopybytewise_1 + ;; LOOP START + ldb.ab r6, [r1,1] + stb.ab r6, [r3,1] +.Lcopybytewise_1: + j [blink] + +.LunalignedOffby2: +;;; CASE 2: The source is unaligned, off by 2 + ldh.ab r5, [r1, 2] + sub r2, r2, 1 + + ;; Both src and dst are aligned + ;; Convert to words, unfold x2 + lsr.f lp_count, r2, 3 +#ifdef __BIG_ENDIAN__ + asl.nz r5, r5, 16 +#endif + lpnz @.Lcopy8bytes_2 + ;; LOOP START + ld.ab r6, [r1, 4] + ld.ab r8, [r1,4] + + SHIFT_1 (r7, r6, 16) + or r7, r7, r5 + SHIFT_2 (r5, r6, 16) + + SHIFT_1 (r9, r8, 16) + or r9, r9, r5 + SHIFT_2 (r5, r8, 16) + + st.ab r7, [r3, 4] + st.ab r9, [r3, 4] +.Lcopy8bytes_2: + +#ifdef __BIG_ENDIAN__ + lsr.nz r5, r5, 16 +#endif + sth.ab r5, [r3, 2] + + and.f lp_count, r2, 0x07 ;Last 8bytes + lpnz @.Lcopybytewise_2 + ;; LOOP START + ldb.ab r6, [r1,1] + stb.ab r6, [r3,1] +.Lcopybytewise_2: + j [blink] + +.LunalignedOffby3: +;;; CASE 3: The source is unaligned, off by 3 +;;; Hence, I need to read 1byte for achieve the 32bit alignment + + ;; Both src and dst are aligned + ;; Convert to words, unfold x2 + lsr.f lp_count, r2, 3 +#ifdef __BIG_ENDIAN__ + asl.ne r5, r5, 24 +#endif + lpnz @.Lcopy8bytes_3 + ;; LOOP START + ld.ab r6, [r1, 4] + ld.ab r8, [r1,4] + + SHIFT_1 (r7, r6, 8) + or r7, r7, r5 + SHIFT_2 (r5, r6, 24) + + SHIFT_1 (r9, r8, 8) + or r9, r9, r5 + SHIFT_2 (r5, r8, 24) + + st.ab r7, [r3, 4] + st.ab r9, [r3, 4] +.Lcopy8bytes_3: + +#ifdef __BIG_ENDIAN__ + lsr.nz r5, r5, 24 +#endif + stb.ab r5, [r3, 1] + + and.f lp_count, r2, 0x07 ;Last 8bytes + lpnz @.Lcopybytewise_3 + ;; LOOP START + ldb.ab r6, [r1,1] + stb.ab r6, [r3,1] +.Lcopybytewise_3: + j [blink] + +END_CFI(memcpy) diff --git a/arch/arc/lib/memset-archs.S b/arch/arc/lib/memset-archs.S new file mode 100644 index 0000000000..d0a5cec4cd --- /dev/null +++ b/arch/arc/lib/memset-archs.S @@ -0,0 +1,144 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) + */ + +#include <linux/linkage.h> +#include <asm/cache.h> + +/* + * The memset implementation below is optimized to use prefetchw and prealloc + * instruction in case of CPU with 64B L1 data cache line (L1_CACHE_SHIFT == 6) + * If you want to implement optimized memset for other possible L1 data cache + * line lengths (32B and 128B) you should rewrite code carefully checking + * we don't call any prefetchw/prealloc instruction for L1 cache lines which + * don't belongs to memset area. + */ + +#if L1_CACHE_SHIFT == 6 + +.macro PREALLOC_INSTR reg, off + prealloc [\reg, \off] +.endm + +.macro PREFETCHW_INSTR reg, off + prefetchw [\reg, \off] +.endm + +#else + +.macro PREALLOC_INSTR reg, off +.endm + +.macro PREFETCHW_INSTR reg, off +.endm + +#endif + +ENTRY_CFI(memset) + mov.f 0, r2 +;;; if size is zero + jz.d [blink] + mov r3, r0 ; don't clobber ret val + + PREFETCHW_INSTR r0, 0 ; Prefetch the first write location + +;;; if length < 8 + brls.d.nt r2, 8, .Lsmallchunk + mov.f lp_count,r2 + + and.f r4, r0, 0x03 + rsub lp_count, r4, 4 + lpnz @.Laligndestination + ;; LOOP BEGIN + stb.ab r1, [r3,1] + sub r2, r2, 1 +.Laligndestination: + +;;; Destination is aligned + and r1, r1, 0xFF + asl r4, r1, 8 + or r4, r4, r1 + asl r5, r4, 16 + or r5, r5, r4 + mov r4, r5 + + sub3 lp_count, r2, 8 + cmp r2, 64 + bmsk.hi r2, r2, 5 + mov.ls lp_count, 0 + add3.hi r2, r2, 8 + +;;; Convert len to Dwords, unfold x8 + lsr.f lp_count, lp_count, 6 + + lpnz @.Lset64bytes + ;; LOOP START + PREALLOC_INSTR r3, 64 ; alloc next line w/o fetching + +#ifdef CONFIG_ARC_HAS_LL64 + std.ab r4, [r3, 8] + std.ab r4, [r3, 8] + std.ab r4, [r3, 8] + std.ab r4, [r3, 8] + std.ab r4, [r3, 8] + std.ab r4, [r3, 8] + std.ab r4, [r3, 8] + std.ab r4, [r3, 8] +#else + st.ab r4, [r3, 4] + st.ab r4, [r3, 4] + st.ab r4, [r3, 4] + st.ab r4, [r3, 4] + st.ab r4, [r3, 4] + st.ab r4, [r3, 4] + st.ab r4, [r3, 4] + st.ab r4, [r3, 4] + st.ab r4, [r3, 4] + st.ab r4, [r3, 4] + st.ab r4, [r3, 4] + st.ab r4, [r3, 4] + st.ab r4, [r3, 4] + st.ab r4, [r3, 4] + st.ab r4, [r3, 4] + st.ab r4, [r3, 4] +#endif +.Lset64bytes: + + lsr.f lp_count, r2, 5 ;Last remaining max 124 bytes + lpnz .Lset32bytes + ;; LOOP START +#ifdef CONFIG_ARC_HAS_LL64 + std.ab r4, [r3, 8] + std.ab r4, [r3, 8] + std.ab r4, [r3, 8] + std.ab r4, [r3, 8] +#else + st.ab r4, [r3, 4] + st.ab r4, [r3, 4] + st.ab r4, [r3, 4] + st.ab r4, [r3, 4] + st.ab r4, [r3, 4] + st.ab r4, [r3, 4] + st.ab r4, [r3, 4] + st.ab r4, [r3, 4] +#endif +.Lset32bytes: + + and.f lp_count, r2, 0x1F ;Last remaining 31 bytes +.Lsmallchunk: + lpnz .Lcopy3bytes + ;; LOOP START + stb.ab r1, [r3, 1] +.Lcopy3bytes: + + j [blink] + +END_CFI(memset) + +ENTRY_CFI(memzero) + ; adjust bzero args to memset args + mov r2, r1 + b.d memset ;tail call so need to tinker with blink + mov r1, 0 +END_CFI(memzero) diff --git a/arch/arc/lib/memset.S b/arch/arc/lib/memset.S new file mode 100644 index 0000000000..9f35960da1 --- /dev/null +++ b/arch/arc/lib/memset.S @@ -0,0 +1,56 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#include <linux/linkage.h> + +#define SMALL 7 /* Must be at least 6 to deal with alignment/loop issues. */ + +ENTRY_CFI(memset) + mov_s r4,r0 + or r12,r0,r2 + bmsk.f r12,r12,1 + extb_s r1,r1 + asl r3,r1,8 + beq.d .Laligned + or_s r1,r1,r3 + brls r2,SMALL,.Ltiny + add r3,r2,r0 + stb r1,[r3,-1] + bclr_s r3,r3,0 + stw r1,[r3,-2] + bmsk.f r12,r0,1 + add_s r2,r2,r12 + sub.ne r2,r2,4 + stb.ab r1,[r4,1] + and r4,r4,-2 + stw.ab r1,[r4,2] + and r4,r4,-4 +.Laligned: ; This code address should be aligned for speed. + asl r3,r1,16 + lsr.f lp_count,r2,2 + or_s r1,r1,r3 + lpne .Loop_end + st.ab r1,[r4,4] +.Loop_end: + j_s [blink] + + .balign 4 +.Ltiny: + mov.f lp_count,r2 + lpne .Ltiny_end + stb.ab r1,[r4,1] +.Ltiny_end: + j_s [blink] +END_CFI(memset) + +; memzero: @r0 = mem, @r1 = size_t +; memset: @r0 = mem, @r1 = char, @r2 = size_t + +ENTRY_CFI(memzero) + ; adjust bzero args to memset args + mov r2, r1 + mov r1, 0 + b memset ;tail call so need to tinker with blink +END_CFI(memzero) diff --git a/arch/arc/lib/strchr-700.S b/arch/arc/lib/strchr-700.S new file mode 100644 index 0000000000..d52e2833f9 --- /dev/null +++ b/arch/arc/lib/strchr-700.S @@ -0,0 +1,130 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +/* ARC700 has a relatively long pipeline and branch prediction, so we want + to avoid branches that are hard to predict. On the other hand, the + presence of the norm instruction makes it easier to operate on whole + words branch-free. */ + +#include <linux/linkage.h> + +ENTRY_CFI(strchr) + extb_s r1,r1 + asl r5,r1,8 + bmsk r2,r0,1 + or r5,r5,r1 + mov_s r3,0x01010101 + breq.d r2,r0,.Laligned + asl r4,r5,16 + sub_s r0,r0,r2 + asl r7,r2,3 + ld_s r2,[r0] +#ifdef __LITTLE_ENDIAN__ + asl r7,r3,r7 +#else + lsr r7,r3,r7 +#endif + or r5,r5,r4 + ror r4,r3 + sub r12,r2,r7 + bic_s r12,r12,r2 + and r12,r12,r4 + brne.d r12,0,.Lfound0_ua + xor r6,r2,r5 + ld.a r2,[r0,4] + sub r12,r6,r7 + bic r12,r12,r6 +#ifdef __LITTLE_ENDIAN__ + and r7,r12,r4 + breq r7,0,.Loop ; For speed, we want this branch to be unaligned. + b .Lfound_char ; Likewise this one. +#else + and r12,r12,r4 + breq r12,0,.Loop ; For speed, we want this branch to be unaligned. + lsr_s r12,r12,7 + bic r2,r7,r6 + b.d .Lfound_char_b + and_s r2,r2,r12 +#endif +; /* We require this code address to be unaligned for speed... */ +.Laligned: + ld_s r2,[r0] + or r5,r5,r4 + ror r4,r3 +; /* ... so that this code address is aligned, for itself and ... */ +.Loop: + sub r12,r2,r3 + bic_s r12,r12,r2 + and r12,r12,r4 + brne.d r12,0,.Lfound0 + xor r6,r2,r5 + ld.a r2,[r0,4] + sub r12,r6,r3 + bic r12,r12,r6 + and r7,r12,r4 + breq r7,0,.Loop /* ... so that this branch is unaligned. */ + ; Found searched-for character. r0 has already advanced to next word. +#ifdef __LITTLE_ENDIAN__ +/* We only need the information about the first matching byte + (i.e. the least significant matching byte) to be exact, + hence there is no problem with carry effects. */ +.Lfound_char: + sub r3,r7,1 + bic r3,r3,r7 + norm r2,r3 + sub_s r0,r0,1 + asr_s r2,r2,3 + j.d [blink] + sub_s r0,r0,r2 + + .balign 4 +.Lfound0_ua: + mov r3,r7 +.Lfound0: + sub r3,r6,r3 + bic r3,r3,r6 + and r2,r3,r4 + or_s r12,r12,r2 + sub_s r3,r12,1 + bic_s r3,r3,r12 + norm r3,r3 + add_s r0,r0,3 + asr_s r12,r3,3 + asl.f 0,r2,r3 + sub_s r0,r0,r12 + j_s.d [blink] + mov.pl r0,0 +#else /* BIG ENDIAN */ +.Lfound_char: + lsr r7,r7,7 + + bic r2,r7,r6 +.Lfound_char_b: + norm r2,r2 + sub_s r0,r0,4 + asr_s r2,r2,3 + j.d [blink] + add_s r0,r0,r2 + +.Lfound0_ua: + mov_s r3,r7 +.Lfound0: + asl_s r2,r2,7 + or r7,r6,r4 + bic_s r12,r12,r2 + sub r2,r7,r3 + or r2,r2,r6 + bic r12,r2,r12 + bic.f r3,r4,r12 + norm r3,r3 + + add.pl r3,r3,1 + asr_s r12,r3,3 + asl.f 0,r2,r3 + add_s r0,r0,r12 + j_s.d [blink] + mov.mi r0,0 +#endif /* ENDIAN */ +END_CFI(strchr) diff --git a/arch/arc/lib/strcmp-archs.S b/arch/arc/lib/strcmp-archs.S new file mode 100644 index 0000000000..7cffb37174 --- /dev/null +++ b/arch/arc/lib/strcmp-archs.S @@ -0,0 +1,75 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) + */ + +#include <linux/linkage.h> + +ENTRY_CFI(strcmp) + or r2, r0, r1 + bmsk_s r2, r2, 1 + brne r2, 0, @.Lcharloop + +;;; s1 and s2 are word aligned + ld.ab r2, [r0, 4] + + mov_s r12, 0x01010101 + ror r11, r12 + .align 4 +.LwordLoop: + ld.ab r3, [r1, 4] + ;; Detect NULL char in str1 + sub r4, r2, r12 + ld.ab r5, [r0, 4] + bic r4, r4, r2 + and r4, r4, r11 + brne.d.nt r4, 0, .LfoundNULL + ;; Check if the read locations are the same + cmp r2, r3 + beq.d .LwordLoop + mov.eq r2, r5 + + ;; A match is found, spot it out +#ifdef __LITTLE_ENDIAN__ + swape r3, r3 + mov_s r0, 1 + swape r2, r2 +#else + mov_s r0, 1 +#endif + cmp_s r2, r3 + j_s.d [blink] + bset.lo r0, r0, 31 + + .align 4 +.LfoundNULL: +#ifdef __BIG_ENDIAN__ + swape r4, r4 + swape r2, r2 + swape r3, r3 +#endif + ;; Find null byte + ffs r0, r4 + bmsk r2, r2, r0 + bmsk r3, r3, r0 + swape r2, r2 + swape r3, r3 + ;; make the return value + sub.f r0, r2, r3 + mov.hi r0, 1 + j_s.d [blink] + bset.lo r0, r0, 31 + + .align 4 +.Lcharloop: + ldb.ab r2, [r0, 1] + ldb.ab r3, [r1, 1] + nop + breq r2, 0, .Lcmpend + breq r2, r3, .Lcharloop + + .align 4 +.Lcmpend: + j_s.d [blink] + sub r0, r2, r3 +END_CFI(strcmp) diff --git a/arch/arc/lib/strcmp.S b/arch/arc/lib/strcmp.S new file mode 100644 index 0000000000..b20c98fb3b --- /dev/null +++ b/arch/arc/lib/strcmp.S @@ -0,0 +1,93 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +/* This is optimized primarily for the ARC700. + It would be possible to speed up the loops by one cycle / word + respective one cycle / byte by forcing double source 1 alignment, unrolling + by a factor of two, and speculatively loading the second word / byte of + source 1; however, that would increase the overhead for loop setup / finish, + and strcmp might often terminate early. */ + +#include <linux/linkage.h> + +ENTRY_CFI(strcmp) + or r2,r0,r1 + bmsk_s r2,r2,1 + brne r2,0,.Lcharloop + mov_s r12,0x01010101 + ror r5,r12 +.Lwordloop: + ld.ab r2,[r0,4] + ld.ab r3,[r1,4] + nop_s + sub r4,r2,r12 + bic r4,r4,r2 + and r4,r4,r5 + brne r4,0,.Lfound0 + breq r2,r3,.Lwordloop +#ifdef __LITTLE_ENDIAN__ + xor r0,r2,r3 ; mask for difference + sub_s r1,r0,1 + bic_s r0,r0,r1 ; mask for least significant difference bit + sub r1,r5,r0 + xor r0,r5,r1 ; mask for least significant difference byte + and_s r2,r2,r0 + and_s r3,r3,r0 +#endif /* LITTLE ENDIAN */ + cmp_s r2,r3 + mov_s r0,1 + j_s.d [blink] + bset.lo r0,r0,31 + + .balign 4 +#ifdef __LITTLE_ENDIAN__ +.Lfound0: + xor r0,r2,r3 ; mask for difference + or r0,r0,r4 ; or in zero indicator + sub_s r1,r0,1 + bic_s r0,r0,r1 ; mask for least significant difference bit + sub r1,r5,r0 + xor r0,r5,r1 ; mask for least significant difference byte + and_s r2,r2,r0 + and_s r3,r3,r0 + sub.f r0,r2,r3 + mov.hi r0,1 + j_s.d [blink] + bset.lo r0,r0,31 +#else /* BIG ENDIAN */ + /* The zero-detection above can mis-detect 0x01 bytes as zeroes + because of carry-propagateion from a lower significant zero byte. + We can compensate for this by checking that bit0 is zero. + This compensation is not necessary in the step where we + get a low estimate for r2, because in any affected bytes + we already have 0x00 or 0x01, which will remain unchanged + when bit 7 is cleared. */ + .balign 4 +.Lfound0: + lsr r0,r4,8 + lsr_s r1,r2 + bic_s r2,r2,r0 ; get low estimate for r2 and get ... + bic_s r0,r0,r1 ; <this is the adjusted mask for zeros> + or_s r3,r3,r0 ; ... high estimate r3 so that r2 > r3 will ... + cmp_s r3,r2 ; ... be independent of trailing garbage + or_s r2,r2,r0 ; likewise for r3 > r2 + bic_s r3,r3,r0 + rlc r0,0 ; r0 := r2 > r3 ? 1 : 0 + cmp_s r2,r3 + j_s.d [blink] + bset.lo r0,r0,31 +#endif /* ENDIAN */ + + .balign 4 +.Lcharloop: + ldb.ab r2,[r0,1] + ldb.ab r3,[r1,1] + nop_s + breq r2,0,.Lcmpend + breq r2,r3,.Lcharloop +.Lcmpend: + j_s.d [blink] + sub r0,r2,r3 +END_CFI(strcmp) diff --git a/arch/arc/lib/strcpy-700.S b/arch/arc/lib/strcpy-700.S new file mode 100644 index 0000000000..6e2294d13e --- /dev/null +++ b/arch/arc/lib/strcpy-700.S @@ -0,0 +1,67 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +/* If dst and src are 4 byte aligned, copy 8 bytes at a time. + If the src is 4, but not 8 byte aligned, we first read 4 bytes to get + it 8 byte aligned. Thus, we can do a little read-ahead, without + dereferencing a cache line that we should not touch. + Note that short and long instructions have been scheduled to avoid + branch stalls. + The beq_s to r3z could be made unaligned & long to avoid a stall + there, but the it is not likely to be taken often, and it + would also be likey to cost an unaligned mispredict at the next call. */ + +#include <linux/linkage.h> + +ENTRY_CFI(strcpy) + or r2,r0,r1 + bmsk_s r2,r2,1 + brne.d r2,0,charloop + mov_s r10,r0 + ld_s r3,[r1,0] + mov r8,0x01010101 + bbit0.d r1,2,loop_start + ror r12,r8 + sub r2,r3,r8 + bic_s r2,r2,r3 + tst_s r2,r12 + bne r3z + mov_s r4,r3 + .balign 4 +loop: + ld.a r3,[r1,4] + st.ab r4,[r10,4] +loop_start: + ld.a r4,[r1,4] + sub r2,r3,r8 + bic_s r2,r2,r3 + tst_s r2,r12 + bne_s r3z + st.ab r3,[r10,4] + sub r2,r4,r8 + bic r2,r2,r4 + tst r2,r12 + beq loop + mov_s r3,r4 +#ifdef __LITTLE_ENDIAN__ +r3z: bmsk.f r1,r3,7 + lsr_s r3,r3,8 +#else +r3z: lsr.f r1,r3,24 + asl_s r3,r3,8 +#endif + bne.d r3z + stb.ab r1,[r10,1] + j_s [blink] + + .balign 4 +charloop: + ldb.ab r3,[r1,1] + + + brne.d r3,0,charloop + stb.ab r3,[r10,1] + j [blink] +END_CFI(strcpy) diff --git a/arch/arc/lib/strlen.S b/arch/arc/lib/strlen.S new file mode 100644 index 0000000000..dae428ceb8 --- /dev/null +++ b/arch/arc/lib/strlen.S @@ -0,0 +1,80 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#include <linux/linkage.h> + +ENTRY_CFI(strlen) + or r3,r0,7 + ld r2,[r3,-7] + ld.a r6,[r3,-3] + mov r4,0x01010101 + ; uses long immediate +#ifdef __LITTLE_ENDIAN__ + asl_s r1,r0,3 + btst_s r0,2 + asl r7,r4,r1 + ror r5,r4 + sub r1,r2,r7 + bic_s r1,r1,r2 + mov.eq r7,r4 + sub r12,r6,r7 + bic r12,r12,r6 + or.eq r12,r12,r1 + and r12,r12,r5 + brne r12,0,.Learly_end +#else /* BIG ENDIAN */ + ror r5,r4 + btst_s r0,2 + mov_s r1,31 + sub3 r7,r1,r0 + sub r1,r2,r4 + bic_s r1,r1,r2 + bmsk r1,r1,r7 + sub r12,r6,r4 + bic r12,r12,r6 + bmsk.ne r12,r12,r7 + or.eq r12,r12,r1 + and r12,r12,r5 + brne r12,0,.Learly_end +#endif /* ENDIAN */ + +.Loop: + ld_s r2,[r3,4] + ld.a r6,[r3,8] + ; stall for load result + sub r1,r2,r4 + bic_s r1,r1,r2 + sub r12,r6,r4 + bic r12,r12,r6 + or r12,r12,r1 + and r12,r12,r5 + breq r12,0,.Loop +.Lend: + and.f r1,r1,r5 + sub.ne r3,r3,4 + mov.eq r1,r12 +#ifdef __LITTLE_ENDIAN__ + sub_s r2,r1,1 + bic_s r2,r2,r1 + norm r1,r2 + sub_s r0,r0,3 + lsr_s r1,r1,3 + sub r0,r3,r0 + j_s.d [blink] + sub r0,r0,r1 +#else /* BIG ENDIAN */ + lsr_s r1,r1,7 + mov.eq r2,r6 + bic_s r1,r1,r2 + norm r1,r1 + sub r0,r3,r0 + lsr_s r1,r1,3 + j_s.d [blink] + add r0,r0,r1 +#endif /* ENDIAN */ +.Learly_end: + b.d .Lend + sub_s.ne r1,r1,r1 +END_CFI(strlen) diff --git a/arch/arc/mm/Makefile b/arch/arc/mm/Makefile new file mode 100644 index 0000000000..633a773369 --- /dev/null +++ b/arch/arc/mm/Makefile @@ -0,0 +1,8 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) +# + +obj-y := extable.o ioremap.o dma.o fault.o init.o +obj-y += tlb.o tlbex.o cache.o mmap.o +obj-$(CONFIG_HIGHMEM) += highmem.o diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c new file mode 100644 index 0000000000..f7e05c1466 --- /dev/null +++ b/arch/arc/mm/cache.c @@ -0,0 +1,1218 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * ARC Cache Management + * + * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/cache.h> +#include <linux/mmu_context.h> +#include <linux/syscalls.h> +#include <linux/uaccess.h> +#include <linux/pagemap.h> +#include <asm/cacheflush.h> +#include <asm/cachectl.h> +#include <asm/setup.h> + +#ifdef CONFIG_ISA_ARCV2 +#define USE_RGN_FLSH 1 +#endif + +static int l2_line_sz; +static int ioc_exists; +int slc_enable = 1, ioc_enable = 1; +unsigned long perip_base = ARC_UNCACHED_ADDR_SPACE; /* legacy value for boot */ +unsigned long perip_end = 0xFFFFFFFF; /* legacy value */ + +static struct cpuinfo_arc_cache { + unsigned int sz_k, line_len, colors; +} ic_info, dc_info, slc_info; + +void (*_cache_line_loop_ic_fn)(phys_addr_t paddr, unsigned long vaddr, + unsigned long sz, const int op, const int full_page); + +void (*__dma_cache_wback_inv)(phys_addr_t start, unsigned long sz); +void (*__dma_cache_inv)(phys_addr_t start, unsigned long sz); +void (*__dma_cache_wback)(phys_addr_t start, unsigned long sz); + +static int read_decode_cache_bcr_arcv2(int c, char *buf, int len) +{ + struct cpuinfo_arc_cache *p_slc = &slc_info; + struct bcr_identity ident; + struct bcr_generic sbcr; + struct bcr_clust_cfg cbcr; + struct bcr_volatile vol; + int n = 0; + + READ_BCR(ARC_REG_SLC_BCR, sbcr); + if (sbcr.ver) { + struct bcr_slc_cfg slc_cfg; + READ_BCR(ARC_REG_SLC_CFG, slc_cfg); + p_slc->sz_k = 128 << slc_cfg.sz; + l2_line_sz = p_slc->line_len = (slc_cfg.lsz == 0) ? 128 : 64; + n += scnprintf(buf + n, len - n, + "SLC\t\t: %uK, %uB Line%s\n", + p_slc->sz_k, p_slc->line_len, IS_USED_RUN(slc_enable)); + } + + READ_BCR(ARC_REG_CLUSTER_BCR, cbcr); + if (cbcr.c) { + ioc_exists = 1; + + /* + * As for today we don't support both IOC and ZONE_HIGHMEM enabled + * simultaneously. This happens because as of today IOC aperture covers + * only ZONE_NORMAL (low mem) and any dma transactions outside this + * region won't be HW coherent. + * If we want to use both IOC and ZONE_HIGHMEM we can use + * bounce_buffer to handle dma transactions to HIGHMEM. + * Also it is possible to modify dma_direct cache ops or increase IOC + * aperture size if we are planning to use HIGHMEM without PAE. + */ + if (IS_ENABLED(CONFIG_HIGHMEM) || is_pae40_enabled()) + ioc_enable = 0; + } else { + ioc_enable = 0; + } + + READ_BCR(AUX_IDENTITY, ident); + + /* HS 2.0 didn't have AUX_VOL */ + if (ident.family > 0x51) { + READ_BCR(AUX_VOL, vol); + perip_base = vol.start << 28; + /* HS 3.0 has limit and strict-ordering fields */ + if (ident.family > 0x52) + perip_end = (vol.limit << 28) - 1; + } + + n += scnprintf(buf + n, len - n, "Peripherals\t: %#lx%s%s\n", + perip_base, + IS_AVAIL3(ioc_exists, ioc_enable, ", IO-Coherency (per-device) ")); + + return n; +} + +int arc_cache_mumbojumbo(int c, char *buf, int len) +{ + struct cpuinfo_arc_cache *p_ic = &ic_info, *p_dc = &dc_info; + struct bcr_cache ibcr, dbcr; + int vipt, assoc; + int n = 0; + + READ_BCR(ARC_REG_IC_BCR, ibcr); + if (!ibcr.ver) + goto dc_chk; + + if (is_isa_arcompact() && (ibcr.ver <= 3)) { + BUG_ON(ibcr.config != 3); + assoc = 2; /* Fixed to 2w set assoc */ + } else if (is_isa_arcv2() && (ibcr.ver >= 4)) { + assoc = 1 << ibcr.config; /* 1,2,4,8 */ + } + + p_ic->line_len = 8 << ibcr.line_len; + p_ic->sz_k = 1 << (ibcr.sz - 1); + p_ic->colors = p_ic->sz_k/assoc/TO_KB(PAGE_SIZE); + + n += scnprintf(buf + n, len - n, + "I-Cache\t\t: %uK, %dway/set, %uB Line, VIPT%s%s\n", + p_ic->sz_k, assoc, p_ic->line_len, + p_ic->colors > 1 ? " aliasing" : "", + IS_USED_CFG(CONFIG_ARC_HAS_ICACHE)); + +dc_chk: + READ_BCR(ARC_REG_DC_BCR, dbcr); + if (!dbcr.ver) + goto slc_chk; + + if (is_isa_arcompact() && (dbcr.ver <= 3)) { + BUG_ON(dbcr.config != 2); + vipt = 1; + assoc = 4; /* Fixed to 4w set assoc */ + p_dc->colors = p_dc->sz_k/assoc/TO_KB(PAGE_SIZE); + } else if (is_isa_arcv2() && (dbcr.ver >= 4)) { + vipt = 0; + assoc = 1 << dbcr.config; /* 1,2,4,8 */ + p_dc->colors = 1; /* PIPT so can't VIPT alias */ + } + + p_dc->line_len = 16 << dbcr.line_len; + p_dc->sz_k = 1 << (dbcr.sz - 1); + + n += scnprintf(buf + n, len - n, + "D-Cache\t\t: %uK, %dway/set, %uB Line, %s%s%s\n", + p_dc->sz_k, assoc, p_dc->line_len, + vipt ? "VIPT" : "PIPT", + p_dc->colors > 1 ? " aliasing" : "", + IS_USED_CFG(CONFIG_ARC_HAS_DCACHE)); + +slc_chk: + if (is_isa_arcv2()) + n += read_decode_cache_bcr_arcv2(c, buf + n, len - n); + + return n; +} + +/* + * Line Operation on {I,D}-Cache + */ + +#define OP_INV 0x1 +#define OP_FLUSH 0x2 +#define OP_FLUSH_N_INV 0x3 +#define OP_INV_IC 0x4 + +/* + * Cache Flush programming model + * + * ARC700 MMUv3 I$ and D$ are both VIPT and can potentially alias. + * Programming model requires both paddr and vaddr irrespecive of aliasing + * considerations: + * - vaddr in {I,D}C_IV?L + * - paddr in {I,D}C_PTAG + * + * In HS38x (MMUv4), D$ is PIPT, I$ is VIPT and can still alias. + * Programming model is different for aliasing vs. non-aliasing I$ + * - D$ / Non-aliasing I$: only paddr in {I,D}C_IV?L + * - Aliasing I$: same as ARC700 above (so MMUv3 routine used for MMUv4 I$) + * + * - If PAE40 is enabled, independent of aliasing considerations, the higher + * bits needs to be written into PTAG_HI + */ + +static inline +void __cache_line_loop_v3(phys_addr_t paddr, unsigned long vaddr, + unsigned long sz, const int op, const int full_page) +{ + unsigned int aux_cmd, aux_tag; + int num_lines; + + if (op == OP_INV_IC) { + aux_cmd = ARC_REG_IC_IVIL; + aux_tag = ARC_REG_IC_PTAG; + } else { + aux_cmd = op & OP_INV ? ARC_REG_DC_IVDL : ARC_REG_DC_FLDL; + aux_tag = ARC_REG_DC_PTAG; + } + + /* Ensure we properly floor/ceil the non-line aligned/sized requests + * and have @paddr - aligned to cache line and integral @num_lines. + * This however can be avoided for page sized since: + * -@paddr will be cache-line aligned already (being page aligned) + * -@sz will be integral multiple of line size (being page sized). + */ + if (!full_page) { + sz += paddr & ~CACHE_LINE_MASK; + paddr &= CACHE_LINE_MASK; + vaddr &= CACHE_LINE_MASK; + } + num_lines = DIV_ROUND_UP(sz, L1_CACHE_BYTES); + + /* + * MMUv3, cache ops require paddr in PTAG reg + * if V-P const for loop, PTAG can be written once outside loop + */ + if (full_page) + write_aux_reg(aux_tag, paddr); + + /* + * This is technically for MMU v4, using the MMU v3 programming model + * Special work for HS38 aliasing I-cache configuration with PAE40 + * - upper 8 bits of paddr need to be written into PTAG_HI + * - (and needs to be written before the lower 32 bits) + * Note that PTAG_HI is hoisted outside the line loop + */ + if (is_pae40_enabled() && op == OP_INV_IC) + write_aux_reg(ARC_REG_IC_PTAG_HI, (u64)paddr >> 32); + + while (num_lines-- > 0) { + if (!full_page) { + write_aux_reg(aux_tag, paddr); + paddr += L1_CACHE_BYTES; + } + + write_aux_reg(aux_cmd, vaddr); + vaddr += L1_CACHE_BYTES; + } +} + +#ifndef USE_RGN_FLSH + +/* + */ +static inline +void __cache_line_loop_v4(phys_addr_t paddr, unsigned long vaddr, + unsigned long sz, const int op, const int full_page) +{ + unsigned int aux_cmd; + int num_lines; + + if (op == OP_INV_IC) { + aux_cmd = ARC_REG_IC_IVIL; + } else { + /* d$ cmd: INV (discard or wback-n-discard) OR FLUSH (wback) */ + aux_cmd = op & OP_INV ? ARC_REG_DC_IVDL : ARC_REG_DC_FLDL; + } + + /* Ensure we properly floor/ceil the non-line aligned/sized requests + * and have @paddr - aligned to cache line and integral @num_lines. + * This however can be avoided for page sized since: + * -@paddr will be cache-line aligned already (being page aligned) + * -@sz will be integral multiple of line size (being page sized). + */ + if (!full_page) { + sz += paddr & ~CACHE_LINE_MASK; + paddr &= CACHE_LINE_MASK; + } + + num_lines = DIV_ROUND_UP(sz, L1_CACHE_BYTES); + + /* + * For HS38 PAE40 configuration + * - upper 8 bits of paddr need to be written into PTAG_HI + * - (and needs to be written before the lower 32 bits) + */ + if (is_pae40_enabled()) { + if (op == OP_INV_IC) + /* + * Non aliasing I-cache in HS38, + * aliasing I-cache handled in __cache_line_loop_v3() + */ + write_aux_reg(ARC_REG_IC_PTAG_HI, (u64)paddr >> 32); + else + write_aux_reg(ARC_REG_DC_PTAG_HI, (u64)paddr >> 32); + } + + while (num_lines-- > 0) { + write_aux_reg(aux_cmd, paddr); + paddr += L1_CACHE_BYTES; + } +} + +#else + +/* + * optimized flush operation which takes a region as opposed to iterating per line + */ +static inline +void __cache_line_loop_v4(phys_addr_t paddr, unsigned long vaddr, + unsigned long sz, const int op, const int full_page) +{ + unsigned int s, e; + + /* Only for Non aliasing I-cache in HS38 */ + if (op == OP_INV_IC) { + s = ARC_REG_IC_IVIR; + e = ARC_REG_IC_ENDR; + } else { + s = ARC_REG_DC_STARTR; + e = ARC_REG_DC_ENDR; + } + + if (!full_page) { + /* for any leading gap between @paddr and start of cache line */ + sz += paddr & ~CACHE_LINE_MASK; + paddr &= CACHE_LINE_MASK; + + /* + * account for any trailing gap to end of cache line + * this is equivalent to DIV_ROUND_UP() in line ops above + */ + sz += L1_CACHE_BYTES - 1; + } + + if (is_pae40_enabled()) { + /* TBD: check if crossing 4TB boundary */ + if (op == OP_INV_IC) + write_aux_reg(ARC_REG_IC_PTAG_HI, (u64)paddr >> 32); + else + write_aux_reg(ARC_REG_DC_PTAG_HI, (u64)paddr >> 32); + } + + /* ENDR needs to be set ahead of START */ + write_aux_reg(e, paddr + sz); /* ENDR is exclusive */ + write_aux_reg(s, paddr); + + /* caller waits on DC_CTRL.FS */ +} + +#endif + +#ifdef CONFIG_ARC_MMU_V3 +#define __cache_line_loop __cache_line_loop_v3 +#else +#define __cache_line_loop __cache_line_loop_v4 +#endif + +#ifdef CONFIG_ARC_HAS_DCACHE + +/*************************************************************** + * Machine specific helpers for Entire D-Cache or Per Line ops + */ + +#ifndef USE_RGN_FLSH +/* + * this version avoids extra read/write of DC_CTRL for flush or invalid ops + * in the non region flush regime (such as for ARCompact) + */ +static inline void __before_dc_op(const int op) +{ + if (op == OP_FLUSH_N_INV) { + /* Dcache provides 2 cmd: FLUSH or INV + * INV in turn has sub-modes: DISCARD or FLUSH-BEFORE + * flush-n-inv is achieved by INV cmd but with IM=1 + * So toggle INV sub-mode depending on op request and default + */ + const unsigned int ctl = ARC_REG_DC_CTRL; + write_aux_reg(ctl, read_aux_reg(ctl) | DC_CTRL_INV_MODE_FLUSH); + } +} + +#else + +static inline void __before_dc_op(const int op) +{ + const unsigned int ctl = ARC_REG_DC_CTRL; + unsigned int val = read_aux_reg(ctl); + + if (op == OP_FLUSH_N_INV) { + val |= DC_CTRL_INV_MODE_FLUSH; + } + + if (op != OP_INV_IC) { + /* + * Flush / Invalidate is provided by DC_CTRL.RNG_OP 0 or 1 + * combined Flush-n-invalidate uses DC_CTRL.IM = 1 set above + */ + val &= ~DC_CTRL_RGN_OP_MSK; + if (op & OP_INV) + val |= DC_CTRL_RGN_OP_INV; + } + write_aux_reg(ctl, val); +} + +#endif + + +static inline void __after_dc_op(const int op) +{ + if (op & OP_FLUSH) { + const unsigned int ctl = ARC_REG_DC_CTRL; + unsigned int reg; + + /* flush / flush-n-inv both wait */ + while ((reg = read_aux_reg(ctl)) & DC_CTRL_FLUSH_STATUS) + ; + + /* Switch back to default Invalidate mode */ + if (op == OP_FLUSH_N_INV) + write_aux_reg(ctl, reg & ~DC_CTRL_INV_MODE_FLUSH); + } +} + +/* + * Operation on Entire D-Cache + * @op = {OP_INV, OP_FLUSH, OP_FLUSH_N_INV} + * Note that constant propagation ensures all the checks are gone + * in generated code + */ +static inline void __dc_entire_op(const int op) +{ + int aux; + + __before_dc_op(op); + + if (op & OP_INV) /* Inv or flush-n-inv use same cmd reg */ + aux = ARC_REG_DC_IVDC; + else + aux = ARC_REG_DC_FLSH; + + write_aux_reg(aux, 0x1); + + __after_dc_op(op); +} + +static inline void __dc_disable(void) +{ + const int r = ARC_REG_DC_CTRL; + + __dc_entire_op(OP_FLUSH_N_INV); + write_aux_reg(r, read_aux_reg(r) | DC_CTRL_DIS); +} + +static void __dc_enable(void) +{ + const int r = ARC_REG_DC_CTRL; + + write_aux_reg(r, read_aux_reg(r) & ~DC_CTRL_DIS); +} + +/* For kernel mappings cache operation: index is same as paddr */ +#define __dc_line_op_k(p, sz, op) __dc_line_op(p, p, sz, op) + +/* + * D-Cache Line ops: Per Line INV (discard or wback+discard) or FLUSH (wback) + */ +static inline void __dc_line_op(phys_addr_t paddr, unsigned long vaddr, + unsigned long sz, const int op) +{ + const int full_page = __builtin_constant_p(sz) && sz == PAGE_SIZE; + unsigned long flags; + + local_irq_save(flags); + + __before_dc_op(op); + + __cache_line_loop(paddr, vaddr, sz, op, full_page); + + __after_dc_op(op); + + local_irq_restore(flags); +} + +#else + +#define __dc_entire_op(op) +#define __dc_disable() +#define __dc_enable() +#define __dc_line_op(paddr, vaddr, sz, op) +#define __dc_line_op_k(paddr, sz, op) + +#endif /* CONFIG_ARC_HAS_DCACHE */ + +#ifdef CONFIG_ARC_HAS_ICACHE + +static inline void __ic_entire_inv(void) +{ + write_aux_reg(ARC_REG_IC_IVIC, 1); + read_aux_reg(ARC_REG_IC_CTRL); /* blocks */ +} + +static inline void +__ic_line_inv_vaddr_local(phys_addr_t paddr, unsigned long vaddr, + unsigned long sz) +{ + const int full_page = __builtin_constant_p(sz) && sz == PAGE_SIZE; + unsigned long flags; + + local_irq_save(flags); + (*_cache_line_loop_ic_fn)(paddr, vaddr, sz, OP_INV_IC, full_page); + local_irq_restore(flags); +} + +#ifndef CONFIG_SMP + +#define __ic_line_inv_vaddr(p, v, s) __ic_line_inv_vaddr_local(p, v, s) + +#else + +struct ic_inv_args { + phys_addr_t paddr, vaddr; + int sz; +}; + +static void __ic_line_inv_vaddr_helper(void *info) +{ + struct ic_inv_args *ic_inv = info; + + __ic_line_inv_vaddr_local(ic_inv->paddr, ic_inv->vaddr, ic_inv->sz); +} + +static void __ic_line_inv_vaddr(phys_addr_t paddr, unsigned long vaddr, + unsigned long sz) +{ + struct ic_inv_args ic_inv = { + .paddr = paddr, + .vaddr = vaddr, + .sz = sz + }; + + on_each_cpu(__ic_line_inv_vaddr_helper, &ic_inv, 1); +} + +#endif /* CONFIG_SMP */ + +#else /* !CONFIG_ARC_HAS_ICACHE */ + +#define __ic_entire_inv() +#define __ic_line_inv_vaddr(pstart, vstart, sz) + +#endif /* CONFIG_ARC_HAS_ICACHE */ + +static noinline void slc_op_rgn(phys_addr_t paddr, unsigned long sz, const int op) +{ +#ifdef CONFIG_ISA_ARCV2 + /* + * SLC is shared between all cores and concurrent aux operations from + * multiple cores need to be serialized using a spinlock + * A concurrent operation can be silently ignored and/or the old/new + * operation can remain incomplete forever (lockup in SLC_CTRL_BUSY loop + * below) + */ + static DEFINE_SPINLOCK(lock); + unsigned long flags; + unsigned int ctrl; + phys_addr_t end; + + spin_lock_irqsave(&lock, flags); + + /* + * The Region Flush operation is specified by CTRL.RGN_OP[11..9] + * - b'000 (default) is Flush, + * - b'001 is Invalidate if CTRL.IM == 0 + * - b'001 is Flush-n-Invalidate if CTRL.IM == 1 + */ + ctrl = read_aux_reg(ARC_REG_SLC_CTRL); + + /* Don't rely on default value of IM bit */ + if (!(op & OP_FLUSH)) /* i.e. OP_INV */ + ctrl &= ~SLC_CTRL_IM; /* clear IM: Disable flush before Inv */ + else + ctrl |= SLC_CTRL_IM; + + if (op & OP_INV) + ctrl |= SLC_CTRL_RGN_OP_INV; /* Inv or flush-n-inv */ + else + ctrl &= ~SLC_CTRL_RGN_OP_INV; + + write_aux_reg(ARC_REG_SLC_CTRL, ctrl); + + /* + * Lower bits are ignored, no need to clip + * END needs to be setup before START (latter triggers the operation) + * END can't be same as START, so add (l2_line_sz - 1) to sz + */ + end = paddr + sz + l2_line_sz - 1; + if (is_pae40_enabled()) + write_aux_reg(ARC_REG_SLC_RGN_END1, upper_32_bits(end)); + + write_aux_reg(ARC_REG_SLC_RGN_END, lower_32_bits(end)); + + if (is_pae40_enabled()) + write_aux_reg(ARC_REG_SLC_RGN_START1, upper_32_bits(paddr)); + + write_aux_reg(ARC_REG_SLC_RGN_START, lower_32_bits(paddr)); + + /* Make sure "busy" bit reports correct stataus, see STAR 9001165532 */ + read_aux_reg(ARC_REG_SLC_CTRL); + + while (read_aux_reg(ARC_REG_SLC_CTRL) & SLC_CTRL_BUSY); + + spin_unlock_irqrestore(&lock, flags); +#endif +} + +static __maybe_unused noinline void slc_op_line(phys_addr_t paddr, unsigned long sz, const int op) +{ +#ifdef CONFIG_ISA_ARCV2 + /* + * SLC is shared between all cores and concurrent aux operations from + * multiple cores need to be serialized using a spinlock + * A concurrent operation can be silently ignored and/or the old/new + * operation can remain incomplete forever (lockup in SLC_CTRL_BUSY loop + * below) + */ + static DEFINE_SPINLOCK(lock); + + const unsigned long SLC_LINE_MASK = ~(l2_line_sz - 1); + unsigned int ctrl, cmd; + unsigned long flags; + int num_lines; + + spin_lock_irqsave(&lock, flags); + + ctrl = read_aux_reg(ARC_REG_SLC_CTRL); + + /* Don't rely on default value of IM bit */ + if (!(op & OP_FLUSH)) /* i.e. OP_INV */ + ctrl &= ~SLC_CTRL_IM; /* clear IM: Disable flush before Inv */ + else + ctrl |= SLC_CTRL_IM; + + write_aux_reg(ARC_REG_SLC_CTRL, ctrl); + + cmd = op & OP_INV ? ARC_AUX_SLC_IVDL : ARC_AUX_SLC_FLDL; + + sz += paddr & ~SLC_LINE_MASK; + paddr &= SLC_LINE_MASK; + + num_lines = DIV_ROUND_UP(sz, l2_line_sz); + + while (num_lines-- > 0) { + write_aux_reg(cmd, paddr); + paddr += l2_line_sz; + } + + /* Make sure "busy" bit reports correct stataus, see STAR 9001165532 */ + read_aux_reg(ARC_REG_SLC_CTRL); + + while (read_aux_reg(ARC_REG_SLC_CTRL) & SLC_CTRL_BUSY); + + spin_unlock_irqrestore(&lock, flags); +#endif +} + +#define slc_op(paddr, sz, op) slc_op_rgn(paddr, sz, op) + +noinline static void slc_entire_op(const int op) +{ + unsigned int ctrl, r = ARC_REG_SLC_CTRL; + + ctrl = read_aux_reg(r); + + if (!(op & OP_FLUSH)) /* i.e. OP_INV */ + ctrl &= ~SLC_CTRL_IM; /* clear IM: Disable flush before Inv */ + else + ctrl |= SLC_CTRL_IM; + + write_aux_reg(r, ctrl); + + if (op & OP_INV) /* Inv or flush-n-inv use same cmd reg */ + write_aux_reg(ARC_REG_SLC_INVALIDATE, 0x1); + else + write_aux_reg(ARC_REG_SLC_FLUSH, 0x1); + + /* Make sure "busy" bit reports correct stataus, see STAR 9001165532 */ + read_aux_reg(r); + + /* Important to wait for flush to complete */ + while (read_aux_reg(r) & SLC_CTRL_BUSY); +} + +static inline void arc_slc_disable(void) +{ + const int r = ARC_REG_SLC_CTRL; + + slc_entire_op(OP_FLUSH_N_INV); + write_aux_reg(r, read_aux_reg(r) | SLC_CTRL_DIS); +} + +static inline void arc_slc_enable(void) +{ + const int r = ARC_REG_SLC_CTRL; + + write_aux_reg(r, read_aux_reg(r) & ~SLC_CTRL_DIS); +} + +/*********************************************************** + * Exported APIs + */ + +/* + * Handle cache congruency of kernel and userspace mappings of page when kernel + * writes-to/reads-from + * + * The idea is to defer flushing of kernel mapping after a WRITE, possible if: + * -dcache is NOT aliasing, hence any U/K-mappings of page are congruent + * -U-mapping doesn't exist yet for page (finalised in update_mmu_cache) + * -In SMP, if hardware caches are coherent + * + * There's a corollary case, where kernel READs from a userspace mapped page. + * If the U-mapping is not congruent to K-mapping, former needs flushing. + */ +void flush_dcache_folio(struct folio *folio) +{ + struct address_space *mapping; + + if (!cache_is_vipt_aliasing()) { + clear_bit(PG_dc_clean, &folio->flags); + return; + } + + /* don't handle anon pages here */ + mapping = folio_flush_mapping(folio); + if (!mapping) + return; + + /* + * pagecache page, file not yet mapped to userspace + * Make a note that K-mapping is dirty + */ + if (!mapping_mapped(mapping)) { + clear_bit(PG_dc_clean, &folio->flags); + } else if (folio_mapped(folio)) { + /* kernel reading from page with U-mapping */ + phys_addr_t paddr = (unsigned long)folio_address(folio); + unsigned long vaddr = folio_pos(folio); + + /* + * vaddr is not actually the virtual address, but is + * congruent to every user mapping. + */ + if (addr_not_cache_congruent(paddr, vaddr)) + __flush_dcache_pages(paddr, vaddr, + folio_nr_pages(folio)); + } +} +EXPORT_SYMBOL(flush_dcache_folio); + +void flush_dcache_page(struct page *page) +{ + return flush_dcache_folio(page_folio(page)); +} +EXPORT_SYMBOL(flush_dcache_page); + +/* + * DMA ops for systems with L1 cache only + * Make memory coherent with L1 cache by flushing/invalidating L1 lines + */ +static void __dma_cache_wback_inv_l1(phys_addr_t start, unsigned long sz) +{ + __dc_line_op_k(start, sz, OP_FLUSH_N_INV); +} + +static void __dma_cache_inv_l1(phys_addr_t start, unsigned long sz) +{ + __dc_line_op_k(start, sz, OP_INV); +} + +static void __dma_cache_wback_l1(phys_addr_t start, unsigned long sz) +{ + __dc_line_op_k(start, sz, OP_FLUSH); +} + +/* + * DMA ops for systems with both L1 and L2 caches, but without IOC + * Both L1 and L2 lines need to be explicitly flushed/invalidated + */ +static void __dma_cache_wback_inv_slc(phys_addr_t start, unsigned long sz) +{ + __dc_line_op_k(start, sz, OP_FLUSH_N_INV); + slc_op(start, sz, OP_FLUSH_N_INV); +} + +static void __dma_cache_inv_slc(phys_addr_t start, unsigned long sz) +{ + __dc_line_op_k(start, sz, OP_INV); + slc_op(start, sz, OP_INV); +} + +static void __dma_cache_wback_slc(phys_addr_t start, unsigned long sz) +{ + __dc_line_op_k(start, sz, OP_FLUSH); + slc_op(start, sz, OP_FLUSH); +} + +/* + * Exported DMA API + */ +void dma_cache_wback_inv(phys_addr_t start, unsigned long sz) +{ + __dma_cache_wback_inv(start, sz); +} +EXPORT_SYMBOL(dma_cache_wback_inv); + +void dma_cache_inv(phys_addr_t start, unsigned long sz) +{ + __dma_cache_inv(start, sz); +} +EXPORT_SYMBOL(dma_cache_inv); + +void dma_cache_wback(phys_addr_t start, unsigned long sz) +{ + __dma_cache_wback(start, sz); +} +EXPORT_SYMBOL(dma_cache_wback); + +/* + * This is API for making I/D Caches consistent when modifying + * kernel code (loadable modules, kprobes, kgdb...) + * This is called on insmod, with kernel virtual address for CODE of + * the module. ARC cache maintenance ops require PHY address thus we + * need to convert vmalloc addr to PHY addr + */ +void flush_icache_range(unsigned long kstart, unsigned long kend) +{ + unsigned int tot_sz; + + WARN(kstart < TASK_SIZE, "%s() can't handle user vaddr", __func__); + + /* Shortcut for bigger flush ranges. + * Here we don't care if this was kernel virtual or phy addr + */ + tot_sz = kend - kstart; + if (tot_sz > PAGE_SIZE) { + flush_cache_all(); + return; + } + + /* Case: Kernel Phy addr (0x8000_0000 onwards) */ + if (likely(kstart > PAGE_OFFSET)) { + /* + * The 2nd arg despite being paddr will be used to index icache + * This is OK since no alternate virtual mappings will exist + * given the callers for this case: kprobe/kgdb in built-in + * kernel code only. + */ + __sync_icache_dcache(kstart, kstart, kend - kstart); + return; + } + + /* + * Case: Kernel Vaddr (0x7000_0000 to 0x7fff_ffff) + * (1) ARC Cache Maintenance ops only take Phy addr, hence special + * handling of kernel vaddr. + * + * (2) Despite @tot_sz being < PAGE_SIZE (bigger cases handled already), + * it still needs to handle a 2 page scenario, where the range + * straddles across 2 virtual pages and hence need for loop + */ + while (tot_sz > 0) { + unsigned int off, sz; + unsigned long phy, pfn; + + off = kstart % PAGE_SIZE; + pfn = vmalloc_to_pfn((void *)kstart); + phy = (pfn << PAGE_SHIFT) + off; + sz = min_t(unsigned int, tot_sz, PAGE_SIZE - off); + __sync_icache_dcache(phy, kstart, sz); + kstart += sz; + tot_sz -= sz; + } +} +EXPORT_SYMBOL(flush_icache_range); + +/* + * General purpose helper to make I and D cache lines consistent. + * @paddr is phy addr of region + * @vaddr is typically user vaddr (breakpoint) or kernel vaddr (vmalloc) + * However in one instance, when called by kprobe (for a breakpt in + * builtin kernel code) @vaddr will be paddr only, meaning CDU operation will + * use a paddr to index the cache (despite VIPT). This is fine since a + * builtin kernel page will not have any virtual mappings. + * kprobe on loadable module will be kernel vaddr. + */ +void __sync_icache_dcache(phys_addr_t paddr, unsigned long vaddr, int len) +{ + __dc_line_op(paddr, vaddr, len, OP_FLUSH_N_INV); + __ic_line_inv_vaddr(paddr, vaddr, len); +} + +/* wrapper to compile time eliminate alignment checks in flush loop */ +void __inv_icache_pages(phys_addr_t paddr, unsigned long vaddr, unsigned nr) +{ + __ic_line_inv_vaddr(paddr, vaddr, nr * PAGE_SIZE); +} + +/* + * wrapper to clearout kernel or userspace mappings of a page + * For kernel mappings @vaddr == @paddr + */ +void __flush_dcache_pages(phys_addr_t paddr, unsigned long vaddr, unsigned nr) +{ + __dc_line_op(paddr, vaddr & PAGE_MASK, nr * PAGE_SIZE, OP_FLUSH_N_INV); +} + +noinline void flush_cache_all(void) +{ + unsigned long flags; + + local_irq_save(flags); + + __ic_entire_inv(); + __dc_entire_op(OP_FLUSH_N_INV); + + local_irq_restore(flags); + +} + +#ifdef CONFIG_ARC_CACHE_VIPT_ALIASING + +void flush_cache_mm(struct mm_struct *mm) +{ + flush_cache_all(); +} + +void flush_cache_page(struct vm_area_struct *vma, unsigned long u_vaddr, + unsigned long pfn) +{ + phys_addr_t paddr = pfn << PAGE_SHIFT; + + u_vaddr &= PAGE_MASK; + + __flush_dcache_pages(paddr, u_vaddr, 1); + + if (vma->vm_flags & VM_EXEC) + __inv_icache_pages(paddr, u_vaddr, 1); +} + +void flush_cache_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end) +{ + flush_cache_all(); +} + +void flush_anon_page(struct vm_area_struct *vma, struct page *page, + unsigned long u_vaddr) +{ + /* TBD: do we really need to clear the kernel mapping */ + __flush_dcache_pages((phys_addr_t)page_address(page), u_vaddr, 1); + __flush_dcache_pages((phys_addr_t)page_address(page), + (phys_addr_t)page_address(page), 1); + +} + +#endif + +void copy_user_highpage(struct page *to, struct page *from, + unsigned long u_vaddr, struct vm_area_struct *vma) +{ + struct folio *src = page_folio(from); + struct folio *dst = page_folio(to); + void *kfrom = kmap_atomic(from); + void *kto = kmap_atomic(to); + int clean_src_k_mappings = 0; + + /* + * If SRC page was already mapped in userspace AND it's U-mapping is + * not congruent with K-mapping, sync former to physical page so that + * K-mapping in memcpy below, sees the right data + * + * Note that while @u_vaddr refers to DST page's userspace vaddr, it is + * equally valid for SRC page as well + * + * For !VIPT cache, all of this gets compiled out as + * addr_not_cache_congruent() is 0 + */ + if (page_mapcount(from) && addr_not_cache_congruent(kfrom, u_vaddr)) { + __flush_dcache_pages((unsigned long)kfrom, u_vaddr, 1); + clean_src_k_mappings = 1; + } + + copy_page(kto, kfrom); + + /* + * Mark DST page K-mapping as dirty for a later finalization by + * update_mmu_cache(). Although the finalization could have been done + * here as well (given that both vaddr/paddr are available). + * But update_mmu_cache() already has code to do that for other + * non copied user pages (e.g. read faults which wire in pagecache page + * directly). + */ + clear_bit(PG_dc_clean, &dst->flags); + + /* + * if SRC was already usermapped and non-congruent to kernel mapping + * sync the kernel mapping back to physical page + */ + if (clean_src_k_mappings) { + __flush_dcache_pages((unsigned long)kfrom, + (unsigned long)kfrom, 1); + } else { + clear_bit(PG_dc_clean, &src->flags); + } + + kunmap_atomic(kto); + kunmap_atomic(kfrom); +} + +void clear_user_page(void *to, unsigned long u_vaddr, struct page *page) +{ + struct folio *folio = page_folio(page); + clear_page(to); + clear_bit(PG_dc_clean, &folio->flags); +} +EXPORT_SYMBOL(clear_user_page); + +/********************************************************************** + * Explicit Cache flush request from user space via syscall + * Needed for JITs which generate code on the fly + */ +SYSCALL_DEFINE3(cacheflush, uint32_t, start, uint32_t, sz, uint32_t, flags) +{ + /* TBD: optimize this */ + flush_cache_all(); + return 0; +} + +/* + * IO-Coherency (IOC) setup rules: + * + * 1. Needs to be at system level, so only once by Master core + * Non-Masters need not be accessing caches at that time + * - They are either HALT_ON_RESET and kick started much later or + * - if run on reset, need to ensure that arc_platform_smp_wait_to_boot() + * doesn't perturb caches or coherency unit + * + * 2. caches (L1 and SLC) need to be purged (flush+inv) before setting up IOC, + * otherwise any straggler data might behave strangely post IOC enabling + * + * 3. All Caches need to be disabled when setting up IOC to elide any in-flight + * Coherency transactions + */ +static noinline void __init arc_ioc_setup(void) +{ + unsigned int ioc_base, mem_sz; + + /* + * If IOC was already enabled (due to bootloader) it technically needs to + * be reconfigured with aperture base,size corresponding to Linux memory map + * which will certainly be different than uboot's. But disabling and + * reenabling IOC when DMA might be potentially active is tricky business. + * To avoid random memory issues later, just panic here and ask user to + * upgrade bootloader to one which doesn't enable IOC + */ + if (read_aux_reg(ARC_REG_IO_COH_ENABLE) & ARC_IO_COH_ENABLE_BIT) + panic("IOC already enabled, please upgrade bootloader!\n"); + + if (!ioc_enable) + return; + + /* Flush + invalidate + disable L1 dcache */ + __dc_disable(); + + /* Flush + invalidate SLC */ + if (read_aux_reg(ARC_REG_SLC_BCR)) + slc_entire_op(OP_FLUSH_N_INV); + + /* + * currently IOC Aperture covers entire DDR + * TBD: fix for PGU + 1GB of low mem + * TBD: fix for PAE + */ + mem_sz = arc_get_mem_sz(); + + if (!is_power_of_2(mem_sz) || mem_sz < 4096) + panic("IOC Aperture size must be power of 2 larger than 4KB"); + + /* + * IOC Aperture size decoded as 2 ^ (SIZE + 2) KB, + * so setting 0x11 implies 512MB, 0x12 implies 1GB... + */ + write_aux_reg(ARC_REG_IO_COH_AP0_SIZE, order_base_2(mem_sz >> 10) - 2); + + /* for now assume kernel base is start of IOC aperture */ + ioc_base = CONFIG_LINUX_RAM_BASE; + + if (ioc_base % mem_sz != 0) + panic("IOC Aperture start must be aligned to the size of the aperture"); + + write_aux_reg(ARC_REG_IO_COH_AP0_BASE, ioc_base >> 12); + write_aux_reg(ARC_REG_IO_COH_PARTIAL, ARC_IO_COH_PARTIAL_BIT); + write_aux_reg(ARC_REG_IO_COH_ENABLE, ARC_IO_COH_ENABLE_BIT); + + /* Re-enable L1 dcache */ + __dc_enable(); +} + +/* + * Cache related boot time checks/setups only needed on master CPU: + * - Geometry checks (kernel build and hardware agree: e.g. L1_CACHE_BYTES) + * Assume SMP only, so all cores will have same cache config. A check on + * one core suffices for all + * - IOC setup / dma callbacks only need to be done once + */ +static noinline void __init arc_cache_init_master(void) +{ + if (IS_ENABLED(CONFIG_ARC_HAS_ICACHE)) { + struct cpuinfo_arc_cache *ic = &ic_info; + + if (!ic->line_len) + panic("cache support enabled but non-existent cache\n"); + + if (ic->line_len != L1_CACHE_BYTES) + panic("ICache line [%d] != kernel Config [%d]", + ic->line_len, L1_CACHE_BYTES); + + /* + * In MMU v4 (HS38x) the aliasing icache config uses IVIL/PTAG + * pair to provide vaddr/paddr respectively, just as in MMU v3 + */ + if (is_isa_arcv2() && ic->colors > 1) + _cache_line_loop_ic_fn = __cache_line_loop_v3; + else + _cache_line_loop_ic_fn = __cache_line_loop; + } + + if (IS_ENABLED(CONFIG_ARC_HAS_DCACHE)) { + struct cpuinfo_arc_cache *dc = &dc_info; + + if (!dc->line_len) + panic("cache support enabled but non-existent cache\n"); + + if (dc->line_len != L1_CACHE_BYTES) + panic("DCache line [%d] != kernel Config [%d]", + dc->line_len, L1_CACHE_BYTES); + + /* check for D-Cache aliasing on ARCompact: ARCv2 has PIPT */ + if (is_isa_arcompact()) { + int handled = IS_ENABLED(CONFIG_ARC_CACHE_VIPT_ALIASING); + + if (dc->colors > 1) { + if (!handled) + panic("Enable CONFIG_ARC_CACHE_VIPT_ALIASING\n"); + if (CACHE_COLORS_NUM != dc->colors) + panic("CACHE_COLORS_NUM not optimized for config\n"); + } else if (handled && dc->colors == 1) { + panic("Disable CONFIG_ARC_CACHE_VIPT_ALIASING\n"); + } + } + } + + /* + * Check that SMP_CACHE_BYTES (and hence ARCH_DMA_MINALIGN) is larger + * or equal to any cache line length. + */ + BUILD_BUG_ON_MSG(L1_CACHE_BYTES > SMP_CACHE_BYTES, + "SMP_CACHE_BYTES must be >= any cache line length"); + if (is_isa_arcv2() && (l2_line_sz > SMP_CACHE_BYTES)) + panic("L2 Cache line [%d] > kernel Config [%d]\n", + l2_line_sz, SMP_CACHE_BYTES); + + /* Note that SLC disable not formally supported till HS 3.0 */ + if (is_isa_arcv2() && l2_line_sz && !slc_enable) + arc_slc_disable(); + + if (is_isa_arcv2() && ioc_exists) + arc_ioc_setup(); + + if (is_isa_arcv2() && l2_line_sz && slc_enable) { + __dma_cache_wback_inv = __dma_cache_wback_inv_slc; + __dma_cache_inv = __dma_cache_inv_slc; + __dma_cache_wback = __dma_cache_wback_slc; + } else { + __dma_cache_wback_inv = __dma_cache_wback_inv_l1; + __dma_cache_inv = __dma_cache_inv_l1; + __dma_cache_wback = __dma_cache_wback_l1; + } + /* + * In case of IOC (say IOC+SLC case), pointers above could still be set + * but end up not being relevant as the first function in chain is not + * called at all for devices using coherent DMA. + * arch_sync_dma_for_cpu() -> dma_cache_*() -> __dma_cache_*() + */ +} + +void __ref arc_cache_init(void) +{ + unsigned int __maybe_unused cpu = smp_processor_id(); + + if (!cpu) + arc_cache_init_master(); + + /* + * In PAE regime, TLB and cache maintenance ops take wider addresses + * And even if PAE is not enabled in kernel, the upper 32-bits still need + * to be zeroed to keep the ops sane. + * As an optimization for more common !PAE enabled case, zero them out + * once at init, rather than checking/setting to 0 for every runtime op + */ + if (is_isa_arcv2() && pae40_exist_but_not_enab()) { + + if (IS_ENABLED(CONFIG_ARC_HAS_ICACHE)) + write_aux_reg(ARC_REG_IC_PTAG_HI, 0); + + if (IS_ENABLED(CONFIG_ARC_HAS_DCACHE)) + write_aux_reg(ARC_REG_DC_PTAG_HI, 0); + + if (l2_line_sz) { + write_aux_reg(ARC_REG_SLC_RGN_END1, 0); + write_aux_reg(ARC_REG_SLC_RGN_START1, 0); + } + } +} diff --git a/arch/arc/mm/dma.c b/arch/arc/mm/dma.c new file mode 100644 index 0000000000..2a7fbbb83b --- /dev/null +++ b/arch/arc/mm/dma.c @@ -0,0 +1,106 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#include <linux/dma-map-ops.h> +#include <asm/cache.h> +#include <asm/cacheflush.h> + +/* + * ARCH specific callbacks for generic noncoherent DMA ops + * - hardware IOC not available (or "dma-coherent" not set for device in DT) + * - But still handle both coherent and non-coherent requests from caller + * + * For DMA coherent hardware (IOC) generic code suffices + */ + +void arch_dma_prep_coherent(struct page *page, size_t size) +{ + /* + * Evict any existing L1 and/or L2 lines for the backing page + * in case it was used earlier as a normal "cached" page. + * Yeah this bit us - STAR 9000898266 + * + * Although core does call flush_cache_vmap(), it gets kvaddr hence + * can't be used to efficiently flush L1 and/or L2 which need paddr + * Currently flush_cache_vmap nukes the L1 cache completely which + * will be optimized as a separate commit + */ + dma_cache_wback_inv(page_to_phys(page), size); +} + +/* + * Cache operations depending on function and direction argument, inspired by + * https://lore.kernel.org/lkml/20180518175004.GF17671@n2100.armlinux.org.uk + * "dma_sync_*_for_cpu and direction=TO_DEVICE (was Re: [PATCH 02/20] + * dma-mapping: provide a generic dma-noncoherent implementation)" + * + * | map == for_device | unmap == for_cpu + * |---------------------------------------------------------------- + * TO_DEV | writeback writeback | none none + * FROM_DEV | invalidate invalidate | invalidate* invalidate* + * BIDIR | writeback+inv writeback+inv | invalidate invalidate + * + * [*] needed for CPU speculative prefetches + * + * NOTE: we don't check the validity of direction argument as it is done in + * upper layer functions (in include/linux/dma-mapping.h) + */ + +void arch_sync_dma_for_device(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) +{ + switch (dir) { + case DMA_TO_DEVICE: + dma_cache_wback(paddr, size); + break; + + case DMA_FROM_DEVICE: + dma_cache_inv(paddr, size); + break; + + case DMA_BIDIRECTIONAL: + dma_cache_wback_inv(paddr, size); + break; + + default: + break; + } +} + +void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size, + enum dma_data_direction dir) +{ + switch (dir) { + case DMA_TO_DEVICE: + break; + + /* FROM_DEVICE invalidate needed if speculative CPU prefetch only */ + case DMA_FROM_DEVICE: + case DMA_BIDIRECTIONAL: + dma_cache_inv(paddr, size); + break; + + default: + break; + } +} + +/* + * Plug in direct dma map ops. + */ +void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size, + const struct iommu_ops *iommu, bool coherent) +{ + /* + * IOC hardware snoops all DMA traffic keeping the caches consistent + * with memory - eliding need for any explicit cache maintenance of + * DMA buffers. + */ + if (is_isa_arcv2() && ioc_enable && coherent) + dev->dma_coherent = true; + + dev_info(dev, "use %scoherent DMA ops\n", + dev->dma_coherent ? "" : "non"); +} diff --git a/arch/arc/mm/extable.c b/arch/arc/mm/extable.c new file mode 100644 index 0000000000..88fa3a4d49 --- /dev/null +++ b/arch/arc/mm/extable.c @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * Borrowed heavily from MIPS + */ + +#include <linux/export.h> +#include <linux/extable.h> +#include <linux/uaccess.h> + +int fixup_exception(struct pt_regs *regs) +{ + const struct exception_table_entry *fixup; + + fixup = search_exception_tables(instruction_pointer(regs)); + if (fixup) { + regs->ret = fixup->fixup; + + return 1; + } + + return 0; +} diff --git a/arch/arc/mm/fault.c b/arch/arc/mm/fault.c new file mode 100644 index 0000000000..95119a5e77 --- /dev/null +++ b/arch/arc/mm/fault.c @@ -0,0 +1,193 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Page Fault Handling for ARC (TLB Miss / ProtV) + * + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#include <linux/signal.h> +#include <linux/interrupt.h> +#include <linux/sched/signal.h> +#include <linux/errno.h> +#include <linux/ptrace.h> +#include <linux/uaccess.h> +#include <linux/kdebug.h> +#include <linux/perf_event.h> +#include <linux/mm_types.h> +#include <asm/entry.h> +#include <asm/mmu.h> + +/* + * kernel virtual address is required to implement vmalloc/pkmap/fixmap + * Refer to asm/processor.h for System Memory Map + * + * It simply copies the PMD entry (pointer to 2nd level page table or hugepage) + * from swapper pgdir to task pgdir. The 2nd level table/page is thus shared + */ +noinline static int handle_kernel_vaddr_fault(unsigned long address) +{ + /* + * Synchronize this task's top level page-table + * with the 'reference' page table. + */ + pgd_t *pgd, *pgd_k; + p4d_t *p4d, *p4d_k; + pud_t *pud, *pud_k; + pmd_t *pmd, *pmd_k; + + pgd = pgd_offset(current->active_mm, address); + pgd_k = pgd_offset_k(address); + + if (pgd_none (*pgd_k)) + goto bad_area; + if (!pgd_present(*pgd)) + set_pgd(pgd, *pgd_k); + + p4d = p4d_offset(pgd, address); + p4d_k = p4d_offset(pgd_k, address); + if (p4d_none(*p4d_k)) + goto bad_area; + if (!p4d_present(*p4d)) + set_p4d(p4d, *p4d_k); + + pud = pud_offset(p4d, address); + pud_k = pud_offset(p4d_k, address); + if (pud_none(*pud_k)) + goto bad_area; + if (!pud_present(*pud)) + set_pud(pud, *pud_k); + + pmd = pmd_offset(pud, address); + pmd_k = pmd_offset(pud_k, address); + if (pmd_none(*pmd_k)) + goto bad_area; + if (!pmd_present(*pmd)) + set_pmd(pmd, *pmd_k); + + /* XXX: create the TLB entry here */ + return 0; + +bad_area: + return 1; +} + +void do_page_fault(unsigned long address, struct pt_regs *regs) +{ + struct vm_area_struct *vma = NULL; + struct task_struct *tsk = current; + struct mm_struct *mm = tsk->mm; + int sig, si_code = SEGV_MAPERR; + unsigned int write = 0, exec = 0, mask; + vm_fault_t fault = VM_FAULT_SIGSEGV; /* handle_mm_fault() output */ + unsigned int flags; /* handle_mm_fault() input */ + + /* + * NOTE! We MUST NOT take any locks for this case. We may + * be in an interrupt or a critical region, and should + * only copy the information from the master page table, + * nothing more. + */ + if (address >= VMALLOC_START && !user_mode(regs)) { + if (unlikely(handle_kernel_vaddr_fault(address))) + goto no_context; + else + return; + } + + /* + * If we're in an interrupt or have no user + * context, we must not take the fault.. + */ + if (faulthandler_disabled() || !mm) + goto no_context; + + if (regs->ecr.cause & ECR_C_PROTV_STORE) /* ST/EX */ + write = 1; + else if ((regs->ecr.vec == ECR_V_PROTV) && + (regs->ecr.cause == ECR_C_PROTV_INST_FETCH)) + exec = 1; + + flags = FAULT_FLAG_DEFAULT; + if (user_mode(regs)) + flags |= FAULT_FLAG_USER; + if (write) + flags |= FAULT_FLAG_WRITE; + + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address); +retry: + vma = lock_mm_and_find_vma(mm, address, regs); + if (!vma) + goto bad_area_nosemaphore; + + /* + * vm_area is good, now check permissions for this memory access + */ + mask = VM_READ; + if (write) + mask = VM_WRITE; + if (exec) + mask = VM_EXEC; + + if (!(vma->vm_flags & mask)) { + si_code = SEGV_ACCERR; + goto bad_area; + } + + fault = handle_mm_fault(vma, address, flags, regs); + + /* Quick path to respond to signals */ + if (fault_signal_pending(fault, regs)) { + if (!user_mode(regs)) + goto no_context; + return; + } + + /* The fault is fully completed (including releasing mmap lock) */ + if (fault & VM_FAULT_COMPLETED) + return; + + /* + * Fault retry nuances, mmap_lock already relinquished by core mm + */ + if (unlikely(fault & VM_FAULT_RETRY)) { + flags |= FAULT_FLAG_TRIED; + goto retry; + } + +bad_area: + mmap_read_unlock(mm); + +bad_area_nosemaphore: + /* + * Major/minor page fault accounting + * (in case of retry we only land here once) + */ + if (likely(!(fault & VM_FAULT_ERROR))) + /* Normal return path: fault Handled Gracefully */ + return; + + if (!user_mode(regs)) + goto no_context; + + if (fault & VM_FAULT_OOM) { + pagefault_out_of_memory(); + return; + } + + if (fault & VM_FAULT_SIGBUS) { + sig = SIGBUS; + si_code = BUS_ADRERR; + } + else { + sig = SIGSEGV; + } + + tsk->thread.fault_address = address; + force_sig_fault(sig, si_code, (void __user *)address); + return; + +no_context: + if (fixup_exception(regs)) + return; + + die("Oops", regs, address); +} diff --git a/arch/arc/mm/highmem.c b/arch/arc/mm/highmem.c new file mode 100644 index 0000000000..c79912a6b1 --- /dev/null +++ b/arch/arc/mm/highmem.c @@ -0,0 +1,73 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2015 Synopsys, Inc. (www.synopsys.com) + */ + +#include <linux/memblock.h> +#include <linux/export.h> +#include <linux/highmem.h> +#include <linux/pgtable.h> +#include <asm/processor.h> +#include <asm/pgalloc.h> +#include <asm/tlbflush.h> + +/* + * HIGHMEM API: + * + * kmap() API provides sleep semantics hence referred to as "permanent maps" + * It allows mapping LAST_PKMAP pages, using @last_pkmap_nr as the cursor + * for book-keeping + * + * kmap_atomic() can't sleep (calls pagefault_disable()), thus it provides + * shortlived ala "temporary mappings" which historically were implemented as + * fixmaps (compile time addr etc). Their book-keeping is done per cpu. + * + * Both these facts combined (preemption disabled and per-cpu allocation) + * means the total number of concurrent fixmaps will be limited to max + * such allocations in a single control path. Thus KM_TYPE_NR (another + * historic relic) is a small'ish number which caps max percpu fixmaps + * + * ARC HIGHMEM Details + * + * - the kernel vaddr space from 0x7z to 0x8z (currently used by vmalloc/module) + * is now shared between vmalloc and kmap (non overlapping though) + * + * - Both fixmap/pkmap use a dedicated page table each, hooked up to swapper PGD + * This means each only has 1 PGDIR_SIZE worth of kvaddr mappings, which means + * 2M of kvaddr space for typical config (8K page and 11:8:13 traversal split) + * + * - The fixed KMAP slots for kmap_local/atomic() require KM_MAX_IDX slots per + * CPU. So the number of CPUs sharing a single PTE page is limited. + * + * - pkmap being preemptible, in theory could do with more than 256 concurrent + * mappings. However, generic pkmap code: map_new_virtual(), doesn't traverse + * the PGD and only works with a single page table @pkmap_page_table, hence + * sets the limit + */ + +extern pte_t * pkmap_page_table; + +static noinline pte_t * __init alloc_kmap_pgtable(unsigned long kvaddr) +{ + pmd_t *pmd_k = pmd_off_k(kvaddr); + pte_t *pte_k; + + pte_k = (pte_t *)memblock_alloc_low(PAGE_SIZE, PAGE_SIZE); + if (!pte_k) + panic("%s: Failed to allocate %lu bytes align=0x%lx\n", + __func__, PAGE_SIZE, PAGE_SIZE); + + pmd_populate_kernel(&init_mm, pmd_k, pte_k); + return pte_k; +} + +void __init kmap_init(void) +{ + /* Due to recursive include hell, we can't do this in processor.h */ + BUILD_BUG_ON(PAGE_OFFSET < (VMALLOC_END + FIXMAP_SIZE + PKMAP_SIZE)); + BUILD_BUG_ON(LAST_PKMAP > PTRS_PER_PTE); + BUILD_BUG_ON(FIX_KMAP_SLOTS > PTRS_PER_PTE); + + pkmap_page_table = alloc_kmap_pgtable(PKMAP_BASE); + alloc_kmap_pgtable(FIXMAP_BASE); +} diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c new file mode 100644 index 0000000000..6a71b23f13 --- /dev/null +++ b/arch/arc/mm/init.c @@ -0,0 +1,202 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/memblock.h> +#ifdef CONFIG_BLK_DEV_INITRD +#include <linux/initrd.h> +#endif +#include <linux/of_fdt.h> +#include <linux/swap.h> +#include <linux/module.h> +#include <linux/highmem.h> +#include <asm/page.h> +#include <asm/sections.h> +#include <asm/setup.h> +#include <asm/arcregs.h> + +pgd_t swapper_pg_dir[PTRS_PER_PGD] __aligned(PAGE_SIZE); +char empty_zero_page[PAGE_SIZE] __aligned(PAGE_SIZE); +EXPORT_SYMBOL(empty_zero_page); + +static const unsigned long low_mem_start = CONFIG_LINUX_RAM_BASE; +static unsigned long low_mem_sz; + +#ifdef CONFIG_HIGHMEM +static unsigned long min_high_pfn, max_high_pfn; +static phys_addr_t high_mem_start; +static phys_addr_t high_mem_sz; +unsigned long arch_pfn_offset; +EXPORT_SYMBOL(arch_pfn_offset); +#endif + +long __init arc_get_mem_sz(void) +{ + return low_mem_sz; +} + +/* User can over-ride above with "mem=nnn[KkMm]" in cmdline */ +static int __init setup_mem_sz(char *str) +{ + low_mem_sz = memparse(str, NULL) & PAGE_MASK; + + /* early console might not be setup yet - it will show up later */ + pr_info("\"mem=%s\": mem sz set to %ldM\n", str, TO_MB(low_mem_sz)); + + return 0; +} +early_param("mem", setup_mem_sz); + +void __init early_init_dt_add_memory_arch(u64 base, u64 size) +{ + int in_use = 0; + + if (!low_mem_sz) { + if (base != low_mem_start) + panic("CONFIG_LINUX_RAM_BASE != DT memory { }"); + + low_mem_sz = size; + in_use = 1; + memblock_add_node(base, size, 0, MEMBLOCK_NONE); + } else { +#ifdef CONFIG_HIGHMEM + high_mem_start = base; + high_mem_sz = size; + in_use = 1; + memblock_add_node(base, size, 1, MEMBLOCK_NONE); + memblock_reserve(base, size); +#endif + } + + pr_info("Memory @ %llx [%lldM] %s\n", + base, TO_MB(size), !in_use ? "Not used":""); +} + +/* + * First memory setup routine called from setup_arch() + * 1. setup swapper's mm @init_mm + * 2. Count the pages we have and setup bootmem allocator + * 3. zone setup + */ +void __init setup_arch_memory(void) +{ + unsigned long max_zone_pfn[MAX_NR_ZONES] = { 0 }; + + setup_initial_init_mm(_text, _etext, _edata, _end); + + /* first page of system - kernel .vector starts here */ + min_low_pfn = virt_to_pfn((void *)CONFIG_LINUX_RAM_BASE); + + /* Last usable page of low mem */ + max_low_pfn = max_pfn = PFN_DOWN(low_mem_start + low_mem_sz); + + /*------------- bootmem allocator setup -----------------------*/ + + /* + * seed the bootmem allocator after any DT memory node parsing or + * "mem=xxx" cmdline overrides have potentially updated @arc_mem_sz + * + * Only low mem is added, otherwise we have crashes when allocating + * mem_map[] itself. NO_BOOTMEM allocates mem_map[] at the end of + * avail memory, ending in highmem with a > 32-bit address. However + * it then tries to memset it with a truncaed 32-bit handle, causing + * the crash + */ + + memblock_reserve(CONFIG_LINUX_LINK_BASE, + __pa(_end) - CONFIG_LINUX_LINK_BASE); + +#ifdef CONFIG_BLK_DEV_INITRD + if (phys_initrd_size) { + memblock_reserve(phys_initrd_start, phys_initrd_size); + initrd_start = (unsigned long)__va(phys_initrd_start); + initrd_end = initrd_start + phys_initrd_size; + } +#endif + + early_init_fdt_reserve_self(); + early_init_fdt_scan_reserved_mem(); + + memblock_dump_all(); + + /*----------------- node/zones setup --------------------------*/ + max_zone_pfn[ZONE_NORMAL] = max_low_pfn; + +#ifdef CONFIG_HIGHMEM + /* + * On ARC (w/o PAE) HIGHMEM addresses are actually smaller (0 based) + * than addresses in normal aka low memory (0x8000_0000 based). + * Even with PAE, the huge peripheral space hole would waste a lot of + * mem with single contiguous mem_map[]. + * Thus when HIGHMEM on ARC is enabled the memory map corresponding + * to the hole is freed and ARC specific version of pfn_valid() + * handles the hole in the memory map. + */ + + min_high_pfn = PFN_DOWN(high_mem_start); + max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz); + + /* + * max_high_pfn should be ok here for both HIGHMEM and HIGHMEM+PAE. + * For HIGHMEM without PAE max_high_pfn should be less than + * min_low_pfn to guarantee that these two regions don't overlap. + * For PAE case highmem is greater than lowmem, so it is natural + * to use max_high_pfn. + * + * In both cases, holes should be handled by pfn_valid(). + */ + max_zone_pfn[ZONE_HIGHMEM] = max_high_pfn; + + high_memory = (void *)(min_high_pfn << PAGE_SHIFT); + + arch_pfn_offset = min(min_low_pfn, min_high_pfn); + kmap_init(); + +#else /* CONFIG_HIGHMEM */ + /* pfn_valid() uses this when FLATMEM=y and HIGHMEM=n */ + max_mapnr = max_low_pfn - min_low_pfn; + +#endif /* CONFIG_HIGHMEM */ + + free_area_init(max_zone_pfn); +} + +static void __init highmem_init(void) +{ +#ifdef CONFIG_HIGHMEM + unsigned long tmp; + + memblock_phys_free(high_mem_start, high_mem_sz); + for (tmp = min_high_pfn; tmp < max_high_pfn; tmp++) + free_highmem_page(pfn_to_page(tmp)); +#endif +} + +/* + * mem_init - initializes memory + * + * Frees up bootmem + * Calculates and displays memory available/used + */ +void __init mem_init(void) +{ + memblock_free_all(); + highmem_init(); + + BUILD_BUG_ON((PTRS_PER_PGD * sizeof(pgd_t)) > PAGE_SIZE); + BUILD_BUG_ON((PTRS_PER_PUD * sizeof(pud_t)) > PAGE_SIZE); + BUILD_BUG_ON((PTRS_PER_PMD * sizeof(pmd_t)) > PAGE_SIZE); + BUILD_BUG_ON((PTRS_PER_PTE * sizeof(pte_t)) > PAGE_SIZE); +} + +#ifdef CONFIG_HIGHMEM +int pfn_valid(unsigned long pfn) +{ + return (pfn >= min_high_pfn && pfn <= max_high_pfn) || + (pfn >= min_low_pfn && pfn <= max_low_pfn); +} +EXPORT_SYMBOL(pfn_valid); +#endif diff --git a/arch/arc/mm/ioremap.c b/arch/arc/mm/ioremap.c new file mode 100644 index 0000000000..b07004d532 --- /dev/null +++ b/arch/arc/mm/ioremap.c @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + */ + +#include <linux/vmalloc.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/mm.h> +#include <linux/cache.h> + +static inline bool arc_uncached_addr_space(phys_addr_t paddr) +{ + if (is_isa_arcompact()) { + if (paddr >= ARC_UNCACHED_ADDR_SPACE) + return true; + } else if (paddr >= perip_base && paddr <= perip_end) { + return true; + } + + return false; +} + +void __iomem *ioremap(phys_addr_t paddr, unsigned long size) +{ + /* + * If the region is h/w uncached, MMU mapping can be elided as optim + * The cast to u32 is fine as this region can only be inside 4GB + */ + if (arc_uncached_addr_space(paddr)) + return (void __iomem *)(u32)paddr; + + return ioremap_prot(paddr, size, + pgprot_val(pgprot_noncached(PAGE_KERNEL))); +} +EXPORT_SYMBOL(ioremap); + +/* + * ioremap with access flags + * Cache semantics wise it is same as ioremap - "forced" uncached. + * However unlike vanilla ioremap which bypasses ARC MMU for addresses in + * ARC hardware uncached region, this one still goes thru the MMU as caller + * might need finer access control (R/W/X) + */ +void __iomem *ioremap_prot(phys_addr_t paddr, size_t size, + unsigned long flags) +{ + pgprot_t prot = __pgprot(flags); + + /* force uncached */ + return generic_ioremap_prot(paddr, size, pgprot_noncached(prot)); +} +EXPORT_SYMBOL(ioremap_prot); + +void iounmap(volatile void __iomem *addr) +{ + /* weird double cast to handle phys_addr_t > 32 bits */ + if (arc_uncached_addr_space((phys_addr_t)(u32)addr)) + return; + + generic_iounmap(addr); +} +EXPORT_SYMBOL(iounmap); diff --git a/arch/arc/mm/mmap.c b/arch/arc/mm/mmap.c new file mode 100644 index 0000000000..fce5fa2b4f --- /dev/null +++ b/arch/arc/mm/mmap.c @@ -0,0 +1,96 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * ARC700 mmap + * + * (started from arm version - for VIPT alias handling) + * + * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com) + */ + +#include <linux/fs.h> +#include <linux/mm.h> +#include <linux/mman.h> +#include <linux/sched/mm.h> + +#include <asm/cacheflush.h> + +#define COLOUR_ALIGN(addr, pgoff) \ + ((((addr) + SHMLBA - 1) & ~(SHMLBA - 1)) + \ + (((pgoff) << PAGE_SHIFT) & (SHMLBA - 1))) + +/* + * Ensure that shared mappings are correctly aligned to + * avoid aliasing issues with VIPT caches. + * We need to ensure that + * a specific page of an object is always mapped at a multiple of + * SHMLBA bytes. + */ +unsigned long +arch_get_unmapped_area(struct file *filp, unsigned long addr, + unsigned long len, unsigned long pgoff, unsigned long flags) +{ + struct mm_struct *mm = current->mm; + struct vm_area_struct *vma; + int do_align = 0; + int aliasing = cache_is_vipt_aliasing(); + struct vm_unmapped_area_info info; + + /* + * We only need to do colour alignment if D cache aliases. + */ + if (aliasing) + do_align = filp || (flags & MAP_SHARED); + + /* + * We enforce the MAP_FIXED case. + */ + if (flags & MAP_FIXED) { + if (aliasing && flags & MAP_SHARED && + (addr - (pgoff << PAGE_SHIFT)) & (SHMLBA - 1)) + return -EINVAL; + return addr; + } + + if (len > TASK_SIZE) + return -ENOMEM; + + if (addr) { + if (do_align) + addr = COLOUR_ALIGN(addr, pgoff); + else + addr = PAGE_ALIGN(addr); + + vma = find_vma(mm, addr); + if (TASK_SIZE - len >= addr && + (!vma || addr + len <= vm_start_gap(vma))) + return addr; + } + + info.flags = 0; + info.length = len; + info.low_limit = mm->mmap_base; + info.high_limit = TASK_SIZE; + info.align_mask = do_align ? (PAGE_MASK & (SHMLBA - 1)) : 0; + info.align_offset = pgoff << PAGE_SHIFT; + return vm_unmapped_area(&info); +} + +static const pgprot_t protection_map[16] = { + [VM_NONE] = PAGE_U_NONE, + [VM_READ] = PAGE_U_R, + [VM_WRITE] = PAGE_U_R, + [VM_WRITE | VM_READ] = PAGE_U_R, + [VM_EXEC] = PAGE_U_X_R, + [VM_EXEC | VM_READ] = PAGE_U_X_R, + [VM_EXEC | VM_WRITE] = PAGE_U_X_R, + [VM_EXEC | VM_WRITE | VM_READ] = PAGE_U_X_R, + [VM_SHARED] = PAGE_U_NONE, + [VM_SHARED | VM_READ] = PAGE_U_R, + [VM_SHARED | VM_WRITE] = PAGE_U_W_R, + [VM_SHARED | VM_WRITE | VM_READ] = PAGE_U_W_R, + [VM_SHARED | VM_EXEC] = PAGE_U_X_R, + [VM_SHARED | VM_EXEC | VM_READ] = PAGE_U_X_R, + [VM_SHARED | VM_EXEC | VM_WRITE] = PAGE_U_X_W_R, + [VM_SHARED | VM_EXEC | VM_WRITE | VM_READ] = PAGE_U_X_W_R +}; +DECLARE_VM_GET_PAGE_PROT diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c new file mode 100644 index 0000000000..e536b2dcd4 --- /dev/null +++ b/arch/arc/mm/tlb.c @@ -0,0 +1,761 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * TLB Management (flush/create/diagnostics) for MMUv3 and MMUv4 + * + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + */ + +#include <linux/module.h> +#include <linux/bug.h> +#include <linux/mm_types.h> + +#include <asm/arcregs.h> +#include <asm/setup.h> +#include <asm/mmu_context.h> +#include <asm/mmu.h> + +/* A copy of the ASID from the PID reg is kept in asid_cache */ +DEFINE_PER_CPU(unsigned int, asid_cache) = MM_CTXT_FIRST_CYCLE; + +static struct cpuinfo_arc_mmu { + unsigned int ver, pg_sz_k, s_pg_sz_m, pae, sets, ways; +} mmuinfo; + +/* + * Utility Routine to erase a J-TLB entry + * Caller needs to setup Index Reg (manually or via getIndex) + */ +static inline void __tlb_entry_erase(void) +{ + write_aux_reg(ARC_REG_TLBPD1, 0); + + if (is_pae40_enabled()) + write_aux_reg(ARC_REG_TLBPD1HI, 0); + + write_aux_reg(ARC_REG_TLBPD0, 0); + write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite); +} + +static void utlb_invalidate(void) +{ + write_aux_reg(ARC_REG_TLBCOMMAND, TLBIVUTLB); +} + +#ifdef CONFIG_ARC_MMU_V3 + +static inline unsigned int tlb_entry_lkup(unsigned long vaddr_n_asid) +{ + unsigned int idx; + + write_aux_reg(ARC_REG_TLBPD0, vaddr_n_asid); + + write_aux_reg(ARC_REG_TLBCOMMAND, TLBProbe); + idx = read_aux_reg(ARC_REG_TLBINDEX); + + return idx; +} + +static void tlb_entry_erase(unsigned int vaddr_n_asid) +{ + unsigned int idx; + + /* Locate the TLB entry for this vaddr + ASID */ + idx = tlb_entry_lkup(vaddr_n_asid); + + /* No error means entry found, zero it out */ + if (likely(!(idx & TLB_LKUP_ERR))) { + __tlb_entry_erase(); + } else { + /* Duplicate entry error */ + WARN(idx == TLB_DUP_ERR, "Probe returned Dup PD for %x\n", + vaddr_n_asid); + } +} + +static void tlb_entry_insert(unsigned int pd0, phys_addr_t pd1) +{ + unsigned int idx; + + /* + * First verify if entry for this vaddr+ASID already exists + * This also sets up PD0 (vaddr, ASID..) for final commit + */ + idx = tlb_entry_lkup(pd0); + + /* + * If Not already present get a free slot from MMU. + * Otherwise, Probe would have located the entry and set INDEX Reg + * with existing location. This will cause Write CMD to over-write + * existing entry with new PD0 and PD1 + */ + if (likely(idx & TLB_LKUP_ERR)) + write_aux_reg(ARC_REG_TLBCOMMAND, TLBGetIndex); + + /* setup the other half of TLB entry (pfn, rwx..) */ + write_aux_reg(ARC_REG_TLBPD1, pd1); + + /* + * Commit the Entry to MMU + * It doesn't sound safe to use the TLBWriteNI cmd here + * which doesn't flush uTLBs. I'd rather be safe than sorry. + */ + write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite); +} + +#else /* MMUv4 */ + +static void tlb_entry_erase(unsigned int vaddr_n_asid) +{ + write_aux_reg(ARC_REG_TLBPD0, vaddr_n_asid | _PAGE_PRESENT); + write_aux_reg(ARC_REG_TLBCOMMAND, TLBDeleteEntry); +} + +static void tlb_entry_insert(unsigned int pd0, phys_addr_t pd1) +{ + write_aux_reg(ARC_REG_TLBPD0, pd0); + + if (!is_pae40_enabled()) { + write_aux_reg(ARC_REG_TLBPD1, pd1); + } else { + write_aux_reg(ARC_REG_TLBPD1, pd1 & 0xFFFFFFFF); + write_aux_reg(ARC_REG_TLBPD1HI, (u64)pd1 >> 32); + } + + write_aux_reg(ARC_REG_TLBCOMMAND, TLBInsertEntry); +} + +#endif + +/* + * Un-conditionally (without lookup) erase the entire MMU contents + */ + +noinline void local_flush_tlb_all(void) +{ + struct cpuinfo_arc_mmu *mmu = &mmuinfo; + unsigned long flags; + unsigned int entry; + int num_tlb = mmu->sets * mmu->ways; + + local_irq_save(flags); + + /* Load PD0 and PD1 with template for a Blank Entry */ + write_aux_reg(ARC_REG_TLBPD1, 0); + + if (is_pae40_enabled()) + write_aux_reg(ARC_REG_TLBPD1HI, 0); + + write_aux_reg(ARC_REG_TLBPD0, 0); + + for (entry = 0; entry < num_tlb; entry++) { + /* write this entry to the TLB */ + write_aux_reg(ARC_REG_TLBINDEX, entry); + write_aux_reg(ARC_REG_TLBCOMMAND, TLBWriteNI); + } + + if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE)) { + const int stlb_idx = 0x800; + + /* Blank sTLB entry */ + write_aux_reg(ARC_REG_TLBPD0, _PAGE_HW_SZ); + + for (entry = stlb_idx; entry < stlb_idx + 16; entry++) { + write_aux_reg(ARC_REG_TLBINDEX, entry); + write_aux_reg(ARC_REG_TLBCOMMAND, TLBWriteNI); + } + } + + utlb_invalidate(); + + local_irq_restore(flags); +} + +/* + * Flush the entire MM for userland. The fastest way is to move to Next ASID + */ +noinline void local_flush_tlb_mm(struct mm_struct *mm) +{ + /* + * Small optimisation courtesy IA64 + * flush_mm called during fork,exit,munmap etc, multiple times as well. + * Only for fork( ) do we need to move parent to a new MMU ctxt, + * all other cases are NOPs, hence this check. + */ + if (atomic_read(&mm->mm_users) == 0) + return; + + /* + * - Move to a new ASID, but only if the mm is still wired in + * (Android Binder ended up calling this for vma->mm != tsk->mm, + * causing h/w - s/w ASID to get out of sync) + * - Also get_new_mmu_context() new implementation allocates a new + * ASID only if it is not allocated already - so unallocate first + */ + destroy_context(mm); + if (current->mm == mm) + get_new_mmu_context(mm); +} + +/* + * Flush a Range of TLB entries for userland. + * @start is inclusive, while @end is exclusive + * Difference between this and Kernel Range Flush is + * -Here the fastest way (if range is too large) is to move to next ASID + * without doing any explicit Shootdown + * -In case of kernel Flush, entry has to be shot down explicitly + */ +void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end) +{ + const unsigned int cpu = smp_processor_id(); + unsigned long flags; + + /* If range @start to @end is more than 32 TLB entries deep, + * its better to move to a new ASID rather than searching for + * individual entries and then shooting them down + * + * The calc above is rough, doesn't account for unaligned parts, + * since this is heuristics based anyways + */ + if (unlikely((end - start) >= PAGE_SIZE * 32)) { + local_flush_tlb_mm(vma->vm_mm); + return; + } + + /* + * @start moved to page start: this alone suffices for checking + * loop end condition below, w/o need for aligning @end to end + * e.g. 2000 to 4001 will anyhow loop twice + */ + start &= PAGE_MASK; + + local_irq_save(flags); + + if (asid_mm(vma->vm_mm, cpu) != MM_CTXT_NO_ASID) { + while (start < end) { + tlb_entry_erase(start | hw_pid(vma->vm_mm, cpu)); + start += PAGE_SIZE; + } + } + + local_irq_restore(flags); +} + +/* Flush the kernel TLB entries - vmalloc/modules (Global from MMU perspective) + * @start, @end interpreted as kvaddr + * Interestingly, shared TLB entries can also be flushed using just + * @start,@end alone (interpreted as user vaddr), although technically SASID + * is also needed. However our smart TLbProbe lookup takes care of that. + */ +void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) +{ + unsigned long flags; + + /* exactly same as above, except for TLB entry not taking ASID */ + + if (unlikely((end - start) >= PAGE_SIZE * 32)) { + local_flush_tlb_all(); + return; + } + + start &= PAGE_MASK; + + local_irq_save(flags); + while (start < end) { + tlb_entry_erase(start); + start += PAGE_SIZE; + } + + local_irq_restore(flags); +} + +/* + * Delete TLB entry in MMU for a given page (??? address) + * NOTE One TLB entry contains translation for single PAGE + */ + +void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page) +{ + const unsigned int cpu = smp_processor_id(); + unsigned long flags; + + /* Note that it is critical that interrupts are DISABLED between + * checking the ASID and using it flush the TLB entry + */ + local_irq_save(flags); + + if (asid_mm(vma->vm_mm, cpu) != MM_CTXT_NO_ASID) { + tlb_entry_erase((page & PAGE_MASK) | hw_pid(vma->vm_mm, cpu)); + } + + local_irq_restore(flags); +} + +#ifdef CONFIG_SMP + +struct tlb_args { + struct vm_area_struct *ta_vma; + unsigned long ta_start; + unsigned long ta_end; +}; + +static inline void ipi_flush_tlb_page(void *arg) +{ + struct tlb_args *ta = arg; + + local_flush_tlb_page(ta->ta_vma, ta->ta_start); +} + +static inline void ipi_flush_tlb_range(void *arg) +{ + struct tlb_args *ta = arg; + + local_flush_tlb_range(ta->ta_vma, ta->ta_start, ta->ta_end); +} + +#ifdef CONFIG_TRANSPARENT_HUGEPAGE +static inline void ipi_flush_pmd_tlb_range(void *arg) +{ + struct tlb_args *ta = arg; + + local_flush_pmd_tlb_range(ta->ta_vma, ta->ta_start, ta->ta_end); +} +#endif + +static inline void ipi_flush_tlb_kernel_range(void *arg) +{ + struct tlb_args *ta = (struct tlb_args *)arg; + + local_flush_tlb_kernel_range(ta->ta_start, ta->ta_end); +} + +void flush_tlb_all(void) +{ + on_each_cpu((smp_call_func_t)local_flush_tlb_all, NULL, 1); +} + +void flush_tlb_mm(struct mm_struct *mm) +{ + on_each_cpu_mask(mm_cpumask(mm), (smp_call_func_t)local_flush_tlb_mm, + mm, 1); +} + +void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) +{ + struct tlb_args ta = { + .ta_vma = vma, + .ta_start = uaddr + }; + + on_each_cpu_mask(mm_cpumask(vma->vm_mm), ipi_flush_tlb_page, &ta, 1); +} + +void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end) +{ + struct tlb_args ta = { + .ta_vma = vma, + .ta_start = start, + .ta_end = end + }; + + on_each_cpu_mask(mm_cpumask(vma->vm_mm), ipi_flush_tlb_range, &ta, 1); +} + +#ifdef CONFIG_TRANSPARENT_HUGEPAGE +void flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end) +{ + struct tlb_args ta = { + .ta_vma = vma, + .ta_start = start, + .ta_end = end + }; + + on_each_cpu_mask(mm_cpumask(vma->vm_mm), ipi_flush_pmd_tlb_range, &ta, 1); +} +#endif + +void flush_tlb_kernel_range(unsigned long start, unsigned long end) +{ + struct tlb_args ta = { + .ta_start = start, + .ta_end = end + }; + + on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1); +} +#endif + +/* + * Routine to create a TLB entry + */ +static void create_tlb(struct vm_area_struct *vma, unsigned long vaddr, pte_t *ptep) +{ + unsigned long flags; + unsigned int asid_or_sasid, rwx; + unsigned long pd0; + phys_addr_t pd1; + + /* + * create_tlb() assumes that current->mm == vma->mm, since + * -it ASID for TLB entry is fetched from MMU ASID reg (valid for curr) + * -completes the lazy write to SASID reg (again valid for curr tsk) + * + * Removing the assumption involves + * -Using vma->mm->context{ASID,SASID}, as opposed to MMU reg. + * -More importantly it makes this handler inconsistent with fast-path + * TLB Refill handler which always deals with "current" + * + * Lets see the use cases when current->mm != vma->mm and we land here + * 1. execve->copy_strings()->__get_user_pages->handle_mm_fault + * Here VM wants to pre-install a TLB entry for user stack while + * current->mm still points to pre-execve mm (hence the condition). + * However the stack vaddr is soon relocated (randomization) and + * move_page_tables() tries to undo that TLB entry. + * Thus not creating TLB entry is not any worse. + * + * 2. ptrace(POKETEXT) causes a CoW - debugger(current) inserting a + * breakpoint in debugged task. Not creating a TLB now is not + * performance critical. + * + * Both the cases above are not good enough for code churn. + */ + if (current->active_mm != vma->vm_mm) + return; + + local_irq_save(flags); + + vaddr &= PAGE_MASK; + + /* update this PTE credentials */ + pte_val(*ptep) |= (_PAGE_PRESENT | _PAGE_ACCESSED); + + /* Create HW TLB(PD0,PD1) from PTE */ + + /* ASID for this task */ + asid_or_sasid = read_aux_reg(ARC_REG_PID) & 0xff; + + pd0 = vaddr | asid_or_sasid | (pte_val(*ptep) & PTE_BITS_IN_PD0); + + /* + * ARC MMU provides fully orthogonal access bits for K/U mode, + * however Linux only saves 1 set to save PTE real-estate + * Here we convert 3 PTE bits into 6 MMU bits: + * -Kernel only entries have Kr Kw Kx 0 0 0 + * -User entries have mirrored K and U bits + */ + rwx = pte_val(*ptep) & PTE_BITS_RWX; + + if (pte_val(*ptep) & _PAGE_GLOBAL) + rwx <<= 3; /* r w x => Kr Kw Kx 0 0 0 */ + else + rwx |= (rwx << 3); /* r w x => Kr Kw Kx Ur Uw Ux */ + + pd1 = rwx | (pte_val(*ptep) & PTE_BITS_NON_RWX_IN_PD1); + + tlb_entry_insert(pd0, pd1); + + local_irq_restore(flags); +} + +/* + * Called at the end of pagefault, for a userspace mapped page + * -pre-install the corresponding TLB entry into MMU + * -Finalize the delayed D-cache flush of kernel mapping of page due to + * flush_dcache_page(), copy_user_page() + * + * Note that flush (when done) involves both WBACK - so physical page is + * in sync as well as INV - so any non-congruent aliases don't remain + */ +void update_mmu_cache_range(struct vm_fault *vmf, struct vm_area_struct *vma, + unsigned long vaddr_unaligned, pte_t *ptep, unsigned int nr) +{ + unsigned long vaddr = vaddr_unaligned & PAGE_MASK; + phys_addr_t paddr = pte_val(*ptep) & PAGE_MASK_PHYS; + struct page *page = pfn_to_page(pte_pfn(*ptep)); + + create_tlb(vma, vaddr, ptep); + + if (page == ZERO_PAGE(0)) { + return; + } + + /* + * Exec page : Independent of aliasing/page-color considerations, + * since icache doesn't snoop dcache on ARC, any dirty + * K-mapping of a code page needs to be wback+inv so that + * icache fetch by userspace sees code correctly. + * !EXEC page: If K-mapping is NOT congruent to U-mapping, flush it + * so userspace sees the right data. + * (Avoids the flush for Non-exec + congruent mapping case) + */ + if ((vma->vm_flags & VM_EXEC) || + addr_not_cache_congruent(paddr, vaddr)) { + struct folio *folio = page_folio(page); + int dirty = !test_and_set_bit(PG_dc_clean, &folio->flags); + if (dirty) { + unsigned long offset = offset_in_folio(folio, paddr); + nr = folio_nr_pages(folio); + paddr -= offset; + vaddr -= offset; + /* wback + inv dcache lines (K-mapping) */ + __flush_dcache_pages(paddr, paddr, nr); + + /* invalidate any existing icache lines (U-mapping) */ + if (vma->vm_flags & VM_EXEC) + __inv_icache_pages(paddr, vaddr, nr); + } + } +} + +#ifdef CONFIG_TRANSPARENT_HUGEPAGE + +/* + * MMUv4 in HS38x cores supports Super Pages which are basis for Linux THP + * support. + * + * Normal and Super pages can co-exist (ofcourse not overlap) in TLB with a + * new bit "SZ" in TLB page descriptor to distinguish between them. + * Super Page size is configurable in hardware (4K to 16M), but fixed once + * RTL builds. + * + * The exact THP size a Linux configuration will support is a function of: + * - MMU page size (typical 8K, RTL fixed) + * - software page walker address split between PGD:PTE:PFN (typical + * 11:8:13, but can be changed with 1 line) + * So for above default, THP size supported is 8K * (2^8) = 2M + * + * Default Page Walker is 2 levels, PGD:PTE:PFN, which in THP regime + * reduces to 1 level (as PTE is folded into PGD and canonically referred + * to as PMD). + * Thus THP PMD accessors are implemented in terms of PTE (just like sparc) + */ + +void update_mmu_cache_pmd(struct vm_area_struct *vma, unsigned long addr, + pmd_t *pmd) +{ + pte_t pte = __pte(pmd_val(*pmd)); + update_mmu_cache_range(NULL, vma, addr, &pte, HPAGE_PMD_NR); +} + +void local_flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end) +{ + unsigned int cpu; + unsigned long flags; + + local_irq_save(flags); + + cpu = smp_processor_id(); + + if (likely(asid_mm(vma->vm_mm, cpu) != MM_CTXT_NO_ASID)) { + unsigned int asid = hw_pid(vma->vm_mm, cpu); + + /* No need to loop here: this will always be for 1 Huge Page */ + tlb_entry_erase(start | _PAGE_HW_SZ | asid); + } + + local_irq_restore(flags); +} + +#endif + +/* Read the Cache Build Configuration Registers, Decode them and save into + * the cpuinfo structure for later use. + * No Validation is done here, simply read/convert the BCRs + */ +int arc_mmu_mumbojumbo(int c, char *buf, int len) +{ + struct cpuinfo_arc_mmu *mmu = &mmuinfo; + unsigned int bcr, u_dtlb, u_itlb, sasid; + struct bcr_mmu_3 *mmu3; + struct bcr_mmu_4 *mmu4; + char super_pg[64] = ""; + int n = 0; + + bcr = read_aux_reg(ARC_REG_MMU_BCR); + mmu->ver = (bcr >> 24); + + if (is_isa_arcompact() && mmu->ver == 3) { + mmu3 = (struct bcr_mmu_3 *)&bcr; + mmu->pg_sz_k = 1 << (mmu3->pg_sz - 1); + mmu->sets = 1 << mmu3->sets; + mmu->ways = 1 << mmu3->ways; + u_dtlb = mmu3->u_dtlb; + u_itlb = mmu3->u_itlb; + sasid = mmu3->sasid; + } else { + mmu4 = (struct bcr_mmu_4 *)&bcr; + mmu->pg_sz_k = 1 << (mmu4->sz0 - 1); + mmu->s_pg_sz_m = 1 << (mmu4->sz1 - 11); + mmu->sets = 64 << mmu4->n_entry; + mmu->ways = mmu4->n_ways * 2; + u_dtlb = mmu4->u_dtlb * 4; + u_itlb = mmu4->u_itlb * 4; + sasid = mmu4->sasid; + mmu->pae = mmu4->pae; + } + + if (mmu->s_pg_sz_m) + scnprintf(super_pg, 64, "/%dM%s", + mmu->s_pg_sz_m, + IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE) ? " (THP enabled)":""); + + n += scnprintf(buf + n, len - n, + "MMU [v%x]\t: %dk%s, swalk %d lvl, JTLB %dx%d, uDTLB %d, uITLB %d%s%s%s\n", + mmu->ver, mmu->pg_sz_k, super_pg, CONFIG_PGTABLE_LEVELS, + mmu->sets, mmu->ways, + u_dtlb, u_itlb, + IS_AVAIL1(sasid, ", SASID"), + IS_AVAIL2(mmu->pae, ", PAE40 ", CONFIG_ARC_HAS_PAE40)); + + return n; +} + +int pae40_exist_but_not_enab(void) +{ + return mmuinfo.pae && !is_pae40_enabled(); +} + +void arc_mmu_init(void) +{ + struct cpuinfo_arc_mmu *mmu = &mmuinfo; + int compat = 0; + + /* + * Can't be done in processor.h due to header include dependencies + */ + BUILD_BUG_ON(!IS_ALIGNED((CONFIG_ARC_KVADDR_SIZE << 20), PMD_SIZE)); + + /* + * stack top size sanity check, + * Can't be done in processor.h due to header include dependencies + */ + BUILD_BUG_ON(!IS_ALIGNED(STACK_TOP, PMD_SIZE)); + + /* + * Ensure that MMU features assumed by kernel exist in hardware. + * - For older ARC700 cpus, only v3 supported + * - For HS cpus, v4 was baseline and v5 is backwards compatible + * (will run older software). + */ + if (is_isa_arcompact() && mmu->ver == 3) + compat = 1; + else if (is_isa_arcv2() && mmu->ver >= 4) + compat = 1; + + if (!compat) + panic("MMU ver %d doesn't match kernel built for\n", mmu->ver); + + if (mmu->pg_sz_k != TO_KB(PAGE_SIZE)) + panic("MMU pg size != PAGE_SIZE (%luk)\n", TO_KB(PAGE_SIZE)); + + if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE) && + mmu->s_pg_sz_m != TO_MB(HPAGE_PMD_SIZE)) + panic("MMU Super pg size != Linux HPAGE_PMD_SIZE (%luM)\n", + (unsigned long)TO_MB(HPAGE_PMD_SIZE)); + + if (IS_ENABLED(CONFIG_ARC_HAS_PAE40) && !mmu->pae) + panic("Hardware doesn't support PAE40\n"); + + /* Enable the MMU with ASID 0 */ + mmu_setup_asid(NULL, 0); + + /* cache the pgd pointer in MMU SCRATCH reg (ARCv2 only) */ + mmu_setup_pgd(NULL, swapper_pg_dir); + + if (pae40_exist_but_not_enab()) + write_aux_reg(ARC_REG_TLBPD1HI, 0); +} + +/* + * TLB Programmer's Model uses Linear Indexes: 0 to {255, 511} for 128 x {2,4} + * The mapping is Column-first. + * --------------------- ----------- + * |way0|way1|way2|way3| |way0|way1| + * --------------------- ----------- + * [set0] | 0 | 1 | 2 | 3 | | 0 | 1 | + * [set1] | 4 | 5 | 6 | 7 | | 2 | 3 | + * ~ ~ ~ ~ + * [set127] | 508| 509| 510| 511| | 254| 255| + * --------------------- ----------- + * For normal operations we don't(must not) care how above works since + * MMU cmd getIndex(vaddr) abstracts that out. + * However for walking WAYS of a SET, we need to know this + */ +#define SET_WAY_TO_IDX(mmu, set, way) ((set) * mmu->ways + (way)) + +/* Handling of Duplicate PD (TLB entry) in MMU. + * -Could be due to buggy customer tapeouts or obscure kernel bugs + * -MMU complaints not at the time of duplicate PD installation, but at the + * time of lookup matching multiple ways. + * -Ideally these should never happen - but if they do - workaround by deleting + * the duplicate one. + * -Knob to be verbose abt it.(TODO: hook them up to debugfs) + */ +volatile int dup_pd_silent; /* Be silent abt it or complain (default) */ + +void do_tlb_overlap_fault(unsigned long cause, unsigned long address, + struct pt_regs *regs) +{ + struct cpuinfo_arc_mmu *mmu = &mmuinfo; + unsigned long flags; + int set, n_ways = mmu->ways; + + n_ways = min(n_ways, 4); + BUG_ON(mmu->ways > 4); + + local_irq_save(flags); + + /* loop thru all sets of TLB */ + for (set = 0; set < mmu->sets; set++) { + + int is_valid, way; + unsigned int pd0[4]; + + /* read out all the ways of current set */ + for (way = 0, is_valid = 0; way < n_ways; way++) { + write_aux_reg(ARC_REG_TLBINDEX, + SET_WAY_TO_IDX(mmu, set, way)); + write_aux_reg(ARC_REG_TLBCOMMAND, TLBRead); + pd0[way] = read_aux_reg(ARC_REG_TLBPD0); + is_valid |= pd0[way] & _PAGE_PRESENT; + pd0[way] &= PAGE_MASK; + } + + /* If all the WAYS in SET are empty, skip to next SET */ + if (!is_valid) + continue; + + /* Scan the set for duplicate ways: needs a nested loop */ + for (way = 0; way < n_ways - 1; way++) { + + int n; + + if (!pd0[way]) + continue; + + for (n = way + 1; n < n_ways; n++) { + if (pd0[way] != pd0[n]) + continue; + + if (!dup_pd_silent) + pr_info("Dup TLB PD0 %08x @ set %d ways %d,%d\n", + pd0[way], set, way, n); + + /* + * clear entry @way and not @n. + * This is critical to our optimised loop + */ + pd0[way] = 0; + write_aux_reg(ARC_REG_TLBINDEX, + SET_WAY_TO_IDX(mmu, set, way)); + __tlb_entry_erase(); + } + } + } + + local_irq_restore(flags); +} diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S new file mode 100644 index 0000000000..e054780a8f --- /dev/null +++ b/arch/arc/mm/tlbex.S @@ -0,0 +1,378 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * TLB Exception Handling for ARC + * + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) + * + * Vineetg: April 2011 : + * -MMU v1: moved out legacy code into a seperate file + * -MMU v3: PD{0,1} bits layout changed: They don't overlap anymore, + * helps avoid a shift when preparing PD0 from PTE + * + * Vineetg: July 2009 + * -For MMU V2, we need not do heuristics at the time of commiting a D-TLB + * entry, so that it doesn't knock out it's I-TLB entry + * -Some more fine tuning: + * bmsk instead of add, asl.cc instead of branch, delay slot utilise etc + * + * Vineetg: July 2009 + * -Practically rewrote the I/D TLB Miss handlers + * Now 40 and 135 instructions a peice as compared to 131 and 449 resp. + * Hence Leaner by 1.5 K + * Used Conditional arithmetic to replace excessive branching + * Also used short instructions wherever possible + * + * Vineetg: Aug 13th 2008 + * -Passing ECR (Exception Cause REG) to do_page_fault( ) for printing + * more information in case of a Fatality + * + * Vineetg: March 25th Bug #92690 + * -Added Debug Code to check if sw-ASID == hw-ASID + + * Rahul Trivedi, Amit Bhor: Codito Technologies 2004 + */ + +#include <linux/linkage.h> +#include <linux/pgtable.h> +#include <asm/entry.h> +#include <asm/mmu.h> +#include <asm/arcregs.h> +#include <asm/cache.h> +#include <asm/processor.h> + +#ifdef CONFIG_ISA_ARCOMPACT +;----------------------------------------------------------------- +; ARC700 Exception Handling doesn't auto-switch stack and it only provides +; ONE scratch AUX reg "ARC_REG_SCRATCH_DATA0" +; +; For Non-SMP, the scratch AUX reg is repurposed to cache task PGD, so a +; "global" is used to free-up FIRST core reg to be able to code the rest of +; exception prologue (IRQ auto-disabled on Exceptions, so it's IRQ-safe). +; Since the Fast Path TLB Miss handler is coded with 4 regs, the remaining 3 +; need to be saved as well by extending the "global" to be 4 words. Hence +; ".size ex_saved_reg1, 16" +; [All of this dance is to avoid stack switching for each TLB Miss, since we +; only need to save only a handful of regs, as opposed to complete reg file] +; +; For ARC700 SMP, the "global" obviously can't be used for free up the FIRST +; core reg as it will not be SMP safe. +; Thus scratch AUX reg is used (and no longer used to cache task PGD). +; To save the rest of 3 regs - per cpu, the global is made "per-cpu". +; Epilogue thus has to locate the "per-cpu" storage for regs. +; To avoid cache line bouncing the per-cpu global is aligned/sized per +; L1_CACHE_SHIFT, despite fundamentally needing to be 12 bytes only. Hence +; ".size ex_saved_reg1, (CONFIG_NR_CPUS << L1_CACHE_SHIFT)" + +; As simple as that.... +;-------------------------------------------------------------------------- + +; scratch memory to save [r0-r3] used to code TLB refill Handler +ARCFP_DATA ex_saved_reg1 + .align 1 << L1_CACHE_SHIFT + .type ex_saved_reg1, @object +#ifdef CONFIG_SMP + .size ex_saved_reg1, (CONFIG_NR_CPUS << L1_CACHE_SHIFT) +ex_saved_reg1: + .zero (CONFIG_NR_CPUS << L1_CACHE_SHIFT) +#else + .size ex_saved_reg1, 16 +ex_saved_reg1: + .zero 16 +#endif + +.macro TLBMISS_FREEUP_REGS +#ifdef CONFIG_SMP + sr r0, [ARC_REG_SCRATCH_DATA0] ; freeup r0 to code with + GET_CPU_ID r0 ; get to per cpu scratch mem, + asl r0, r0, L1_CACHE_SHIFT ; cache line wide per cpu + add r0, @ex_saved_reg1, r0 +#else + st r0, [@ex_saved_reg1] + mov_s r0, @ex_saved_reg1 +#endif + st_s r1, [r0, 4] + st_s r2, [r0, 8] + st_s r3, [r0, 12] +.endm + +.macro TLBMISS_RESTORE_REGS +#ifdef CONFIG_SMP + GET_CPU_ID r0 ; get to per cpu scratch mem + asl r0, r0, L1_CACHE_SHIFT ; each is cache line wide + add r0, @ex_saved_reg1, r0 + ld_s r3, [r0,12] + ld_s r2, [r0, 8] + ld_s r1, [r0, 4] + lr r0, [ARC_REG_SCRATCH_DATA0] +#else + mov_s r0, @ex_saved_reg1 + ld_s r3, [r0,12] + ld_s r2, [r0, 8] + ld_s r1, [r0, 4] + ld_s r0, [r0] +#endif +.endm + +#else /* ARCv2 */ + +.macro TLBMISS_FREEUP_REGS +#ifdef CONFIG_ARC_HAS_LL64 + std r0, [sp, -16] + std r2, [sp, -8] +#else + PUSH r0 + PUSH r1 + PUSH r2 + PUSH r3 +#endif +.endm + +.macro TLBMISS_RESTORE_REGS +#ifdef CONFIG_ARC_HAS_LL64 + ldd r0, [sp, -16] + ldd r2, [sp, -8] +#else + POP r3 + POP r2 + POP r1 + POP r0 +#endif +.endm + +#endif + +;============================================================================ +;TLB Miss handling Code +;============================================================================ + +#ifndef PMD_SHIFT +#define PMD_SHIFT PUD_SHIFT +#endif + +#ifndef PUD_SHIFT +#define PUD_SHIFT PGDIR_SHIFT +#endif + +;----------------------------------------------------------------------------- +; This macro does the page-table lookup for the faulting address. +; OUT: r0 = PTE faulted on, r1 = ptr to PTE, r2 = Faulting V-address +.macro LOAD_FAULT_PTE + + lr r2, [efa] + +#ifdef CONFIG_ISA_ARCV2 + lr r1, [ARC_REG_SCRATCH_DATA0] ; current pgd +#else + GET_CURR_TASK_ON_CPU r1 + ld r1, [r1, TASK_ACT_MM] + ld r1, [r1, MM_PGD] +#endif + + lsr r0, r2, PGDIR_SHIFT ; Bits for indexing into PGD + ld.as r3, [r1, r0] ; PGD entry corresp to faulting addr + tst r3, r3 + bz do_slow_path_pf ; if no Page Table, do page fault + +#if CONFIG_PGTABLE_LEVELS > 3 + lsr r0, r2, PUD_SHIFT ; Bits for indexing into PUD + and r0, r0, (PTRS_PER_PUD - 1) + ld.as r1, [r3, r0] ; PMD entry + tst r1, r1 + bz do_slow_path_pf + mov r3, r1 +#endif + +#if CONFIG_PGTABLE_LEVELS > 2 + lsr r0, r2, PMD_SHIFT ; Bits for indexing into PMD + and r0, r0, (PTRS_PER_PMD - 1) + ld.as r1, [r3, r0] ; PMD entry + tst r1, r1 + bz do_slow_path_pf + mov r3, r1 +#endif + +#ifdef CONFIG_TRANSPARENT_HUGEPAGE + and.f 0, r3, _PAGE_HW_SZ ; Is this Huge PMD (thp) + add2.nz r1, r1, r0 + bnz.d 2f ; YES: PGD == PMD has THP PTE: stop pgd walk + mov.nz r0, r3 + +#endif + and r1, r3, PAGE_MASK + + ; Get the PTE entry: The idea is + ; (1) x = addr >> PAGE_SHIFT -> masks page-off bits from @fault-addr + ; (2) y = x & (PTRS_PER_PTE - 1) -> to get index + ; (3) z = (pgtbl + y * 4) + +#ifdef CONFIG_ARC_HAS_PAE40 +#define PTE_SIZE_LOG 3 /* 8 == 2 ^ 3 */ +#else +#define PTE_SIZE_LOG 2 /* 4 == 2 ^ 2 */ +#endif + + ; multiply in step (3) above avoided by shifting lesser in step (1) + lsr r0, r2, ( PAGE_SHIFT - PTE_SIZE_LOG ) + and r0, r0, ( (PTRS_PER_PTE - 1) << PTE_SIZE_LOG ) + ld.aw r0, [r1, r0] ; r0: PTE (lower word only for PAE40) + ; r1: PTE ptr + +2: + +.endm + +;----------------------------------------------------------------- +; Convert Linux PTE entry into TLB entry +; A one-word PTE entry is programmed as two-word TLB Entry [PD0:PD1] in mmu +; (for PAE40, two-words PTE, while three-word TLB Entry [PD0:PD1:PD1HI]) +; IN: r0 = PTE, r1 = ptr to PTE + +.macro CONV_PTE_TO_TLB + and r3, r0, PTE_BITS_RWX ; r w x + asl r2, r3, 3 ; Kr Kw Kx 0 0 0 (GLOBAL, kernel only) + and.f 0, r0, _PAGE_GLOBAL + or.z r2, r2, r3 ; Kr Kw Kx Ur Uw Ux (!GLOBAL, user page) + + and r3, r0, PTE_BITS_NON_RWX_IN_PD1 ; Extract PFN+cache bits from PTE + or r3, r3, r2 + + sr r3, [ARC_REG_TLBPD1] ; paddr[31..13] | Kr Kw Kx Ur Uw Ux | C +#ifdef CONFIG_ARC_HAS_PAE40 + ld r3, [r1, 4] ; paddr[39..32] + sr r3, [ARC_REG_TLBPD1HI] +#endif + + and r2, r0, PTE_BITS_IN_PD0 ; Extract other PTE flags: (V)alid, (G)lb + + lr r3,[ARC_REG_TLBPD0] ; MMU prepares PD0 with vaddr and asid + + or r3, r3, r2 ; S | vaddr | {sasid|asid} + sr r3,[ARC_REG_TLBPD0] ; rewrite PD0 +.endm + +;----------------------------------------------------------------- +; Commit the TLB entry into MMU + +.macro COMMIT_ENTRY_TO_MMU +#ifdef CONFIG_ARC_MMU_V3 + + /* Get free TLB slot: Set = computed from vaddr, way = random */ + sr TLBGetIndex, [ARC_REG_TLBCOMMAND] + + /* Commit the Write */ + sr TLBWriteNI, [ARC_REG_TLBCOMMAND] + +#else + sr TLBInsertEntry, [ARC_REG_TLBCOMMAND] +#endif + +88: +.endm + + +ARCFP_CODE ;Fast Path Code, candidate for ICCM + +;----------------------------------------------------------------------------- +; I-TLB Miss Exception Handler +;----------------------------------------------------------------------------- + +ENTRY(EV_TLBMissI) + + TLBMISS_FREEUP_REGS + + ;---------------------------------------------------------------- + ; Get the PTE corresponding to V-addr accessed, r2 is setup with EFA + LOAD_FAULT_PTE + + ;---------------------------------------------------------------- + ; VERIFY_PTE: Check if PTE permissions approp for executing code + cmp_s r2, VMALLOC_START + mov_s r2, (_PAGE_PRESENT | _PAGE_EXECUTE) + or.hs r2, r2, _PAGE_GLOBAL + + and r3, r0, r2 ; Mask out NON Flag bits from PTE + xor.f r3, r3, r2 ; check ( ( pte & flags_test ) == flags_test ) + bnz do_slow_path_pf + + ; Let Linux VM know that the page was accessed + or r0, r0, _PAGE_ACCESSED ; set Accessed Bit + st_s r0, [r1] ; Write back PTE + + CONV_PTE_TO_TLB + COMMIT_ENTRY_TO_MMU + TLBMISS_RESTORE_REGS +EV_TLBMissI_fast_ret: ; additional label for VDK OS-kit instrumentation + rtie + +END(EV_TLBMissI) + +;----------------------------------------------------------------------------- +; D-TLB Miss Exception Handler +;----------------------------------------------------------------------------- + +ENTRY(EV_TLBMissD) + + TLBMISS_FREEUP_REGS + + ;---------------------------------------------------------------- + ; Get the PTE corresponding to V-addr accessed + ; If PTE exists, it will setup, r0 = PTE, r1 = Ptr to PTE, r2 = EFA + LOAD_FAULT_PTE + + ;---------------------------------------------------------------- + ; VERIFY_PTE: Chk if PTE permissions approp for data access (R/W/R+W) + + cmp_s r2, VMALLOC_START + mov_s r2, _PAGE_PRESENT ; common bit for K/U PTE + or.hs r2, r2, _PAGE_GLOBAL ; kernel PTE only + + ; Linux PTE [RWX] bits are semantically overloaded: + ; -If PAGE_GLOBAL set, they refer to kernel-only flags (vmalloc) + ; -Otherwise they are user-mode permissions, and those are exactly + ; same for kernel mode as well (e.g. copy_(to|from)_user) + + lr r3, [ecr] + btst_s r3, ECR_C_BIT_DTLB_LD_MISS ; Read Access + or.nz r2, r2, _PAGE_READ ; chk for Read flag in PTE + btst_s r3, ECR_C_BIT_DTLB_ST_MISS ; Write Access + or.nz r2, r2, _PAGE_WRITE ; chk for Write flag in PTE + ; Above laddering takes care of XCHG access (both R and W) + + ; By now, r2 setup with all the Flags we need to check in PTE + and r3, r0, r2 ; Mask out NON Flag bits from PTE + brne.d r3, r2, do_slow_path_pf ; is ((pte & flags_test) == flags_test) + + ;---------------------------------------------------------------- + ; UPDATE_PTE: Let Linux VM know that page was accessed/dirty + or r0, r0, _PAGE_ACCESSED ; Accessed bit always + or.nz r0, r0, _PAGE_DIRTY ; if Write, set Dirty bit as well + st_s r0, [r1] ; Write back PTE + + CONV_PTE_TO_TLB + + COMMIT_ENTRY_TO_MMU + TLBMISS_RESTORE_REGS +EV_TLBMissD_fast_ret: ; additional label for VDK OS-kit instrumentation + rtie + +;-------- Common routine to call Linux Page Fault Handler ----------- +do_slow_path_pf: + +#ifdef CONFIG_ISA_ARCV2 + ; Set Z flag if exception in U mode. Hardware micro-ops do this on any + ; taken interrupt/exception, and thus is already the case at the entry + ; above, but ensuing code would have already clobbered. + ; EXCEPTION_PROLOGUE called in slow path, relies on correct Z flag set + + lr r2, [erstatus] + and r2, r2, STATUS_U_MASK + bxor.f 0, r2, STATUS_U_BIT +#endif + + ; Restore the 4-scratch regs saved by fast path miss handler + TLBMISS_RESTORE_REGS + + ; Slow path TLB Miss handled as a regular ARC Exception + ; (stack switching / save the complete reg-file). + b call_do_page_fault +END(EV_TLBMissD) diff --git a/arch/arc/plat-axs10x/Kconfig b/arch/arc/plat-axs10x/Kconfig new file mode 100644 index 0000000000..b9652c69d1 --- /dev/null +++ b/arch/arc/plat-axs10x/Kconfig @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com) +# + +menuconfig ARC_PLAT_AXS10X + bool "Synopsys ARC AXS10x Software Development Platforms" + select DW_APB_ICTL + select GPIO_DWAPB + select OF_GPIO + select HAVE_PCI + select GENERIC_IRQ_CHIP + select GPIOLIB + select AXS101 if ISA_ARCOMPACT + select AXS103 if ISA_ARCV2 + help + Support for the ARC AXS10x Software Development Platforms. + + The AXS10x Platforms consist of a mainboard with peripherals, + on which several daughter cards can be placed. The daughter cards + typically contain a CPU and memory. + +if ARC_PLAT_AXS10X + +config AXS101 + depends on ISA_ARCOMPACT + bool "AXS101 with AXC001 CPU Card (ARC 770D/EM6/AS221)" + help + This adds support for the 770D/EM6/AS221 CPU Card. Only the ARC + 770D is supported in Linux. + + The AXS101 Platform consists of an AXS10x mainboard with + this daughtercard. Please use the axs101.dts device tree + with this configuration. + +config AXS103 + bool "AXS103 with AXC003 CPU Card (ARC HS38x)" + depends on ISA_ARCV2 + help + This adds support for the HS38x CPU Card. + + The AXS103 Platform consists of an AXS10x mainboard with + this daughtercard. Please use the axs103.dts device tree + with this configuration. + +endif diff --git a/arch/arc/plat-axs10x/Makefile b/arch/arc/plat-axs10x/Makefile new file mode 100644 index 0000000000..cebe5716ee --- /dev/null +++ b/arch/arc/plat-axs10x/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com) +# + +obj-$(CONFIG_ARC_PLAT_AXS10X) += axs10x.o diff --git a/arch/arc/plat-axs10x/axs10x.c b/arch/arc/plat-axs10x/axs10x.c new file mode 100644 index 0000000000..1feb990a56 --- /dev/null +++ b/arch/arc/plat-axs10x/axs10x.c @@ -0,0 +1,384 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * AXS101/AXS103 Software Development Platform + * + * Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com) + */ + +#include <linux/of_fdt.h> +#include <linux/libfdt.h> + +#include <asm/asm-offsets.h> +#include <asm/io.h> +#include <asm/mach_desc.h> +#include <soc/arc/mcip.h> + +#define AXS_MB_CGU 0xE0010000 +#define AXS_MB_CREG 0xE0011000 + +#define CREG_MB_IRQ_MUX (AXS_MB_CREG + 0x214) +#define CREG_MB_SW_RESET (AXS_MB_CREG + 0x220) +#define CREG_MB_VER (AXS_MB_CREG + 0x230) +#define CREG_MB_CONFIG (AXS_MB_CREG + 0x234) + +#define AXC001_CREG 0xF0001000 +#define AXC001_GPIO_INTC 0xF0003000 + +static void __init axs10x_enable_gpio_intc_wire(void) +{ + /* + * Peripherals on CPU Card and Mother Board are wired to cpu intc via + * intermediate DW APB GPIO blocks (mainly for debouncing) + * + * --------------------- + * | snps,arc700-intc | + * --------------------- + * | #7 | #15 + * ------------------- ------------------- + * | snps,dw-apb-gpio | | snps,dw-apb-gpio | + * ------------------- ------------------- + * | #12 | + * | [ Debug UART on cpu card ] + * | + * ------------------------ + * | snps,dw-apb-intc (MB)| + * ------------------------ + * | | | | + * [eth] [uart] [... other perip on Main Board] + * + * Current implementation of "irq-dw-apb-ictl" driver doesn't work well + * with stacked INTCs. In particular problem happens if its master INTC + * not yet instantiated. See discussion here - + * https://lore.kernel.org/lkml/54F6FE2C.7020309@synopsys.com + * + * So setup the first gpio block as a passive pass thru and hide it from + * DT hardware topology - connect MB intc directly to cpu intc + * The GPIO "wire" needs to be init nevertheless (here) + * + * One side adv is that peripheral interrupt handling avoids one nested + * intc ISR hop + */ +#define GPIO_INTEN (AXC001_GPIO_INTC + 0x30) +#define GPIO_INTMASK (AXC001_GPIO_INTC + 0x34) +#define GPIO_INTTYPE_LEVEL (AXC001_GPIO_INTC + 0x38) +#define GPIO_INT_POLARITY (AXC001_GPIO_INTC + 0x3c) +#define MB_TO_GPIO_IRQ 12 + + iowrite32(~(1 << MB_TO_GPIO_IRQ), (void __iomem *) GPIO_INTMASK); + iowrite32(0, (void __iomem *) GPIO_INTTYPE_LEVEL); + iowrite32(~0, (void __iomem *) GPIO_INT_POLARITY); + iowrite32(1 << MB_TO_GPIO_IRQ, (void __iomem *) GPIO_INTEN); +} + +static void __init axs10x_print_board_ver(unsigned int creg, const char *str) +{ + union ver { + struct { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int pad:11, y:12, m:4, d:5; +#else + unsigned int d:5, m:4, y:12, pad:11; +#endif + }; + unsigned int val; + } board; + + board.val = ioread32((void __iomem *)creg); + pr_info("AXS: %s FPGA Date: %u-%u-%u\n", str, board.d, board.m, + board.y); +} + +static void __init axs10x_early_init(void) +{ + int mb_rev; + char mb[32]; + + /* Determine motherboard version */ + if (ioread32((void __iomem *) CREG_MB_CONFIG) & (1 << 28)) + mb_rev = 3; /* HT-3 (rev3.0) */ + else + mb_rev = 2; /* HT-2 (rev2.0) */ + + axs10x_enable_gpio_intc_wire(); + + scnprintf(mb, 32, "MainBoard v%d", mb_rev); + axs10x_print_board_ver(CREG_MB_VER, mb); +} + +#ifdef CONFIG_AXS101 + +#define CREG_CPU_ADDR_770 (AXC001_CREG + 0x20) +#define CREG_CPU_ADDR_TUNN (AXC001_CREG + 0x60) +#define CREG_CPU_ADDR_770_UPD (AXC001_CREG + 0x34) +#define CREG_CPU_ADDR_TUNN_UPD (AXC001_CREG + 0x74) + +#define CREG_CPU_ARC770_IRQ_MUX (AXC001_CREG + 0x114) +#define CREG_CPU_GPIO_UART_MUX (AXC001_CREG + 0x120) + +/* + * Set up System Memory Map for ARC cpu / peripherals controllers + * + * Each AXI master has a 4GB memory map specified as 16 apertures of 256MB, each + * of which maps to a corresponding 256MB aperture in Target slave memory map. + * + * e.g. ARC cpu AXI Master's aperture 8 (0x8000_0000) is mapped to aperture 0 + * (0x0000_0000) of DDR Port 0 (slave #1) + * + * Access from cpu to MB controllers such as GMAC is setup using AXI Tunnel: + * which has master/slaves on both ends. + * e.g. aperture 14 (0xE000_0000) of ARC cpu is mapped to aperture 14 + * (0xE000_0000) of CPU Card AXI Tunnel slave (slave #3) which is mapped to + * MB AXI Tunnel Master, which also has a mem map setup + * + * In the reverse direction, MB AXI Masters (e.g. GMAC) mem map is setup + * to map to MB AXI Tunnel slave which connects to CPU Card AXI Tunnel Master + */ +struct aperture { + unsigned int slave_sel:4, slave_off:4, pad:24; +}; + +/* CPU Card target slaves */ +#define AXC001_SLV_NONE 0 +#define AXC001_SLV_DDR_PORT0 1 +#define AXC001_SLV_SRAM 2 +#define AXC001_SLV_AXI_TUNNEL 3 +#define AXC001_SLV_AXI2APB 6 +#define AXC001_SLV_DDR_PORT1 7 + +/* MB AXI Target slaves */ +#define AXS_MB_SLV_NONE 0 +#define AXS_MB_SLV_AXI_TUNNEL_CPU 1 +#define AXS_MB_SLV_AXI_TUNNEL_HAPS 2 +#define AXS_MB_SLV_SRAM 3 +#define AXS_MB_SLV_CONTROL 4 + +/* MB AXI masters */ +#define AXS_MB_MST_TUNNEL_CPU 0 +#define AXS_MB_MST_USB_OHCI 10 + +/* + * memmap for ARC core on CPU Card + */ +static const struct aperture axc001_memmap[16] = { + {AXC001_SLV_AXI_TUNNEL, 0x0}, + {AXC001_SLV_AXI_TUNNEL, 0x1}, + {AXC001_SLV_SRAM, 0x0}, /* 0x2000_0000: Local SRAM */ + {AXC001_SLV_NONE, 0x0}, + {AXC001_SLV_NONE, 0x0}, + {AXC001_SLV_NONE, 0x0}, + {AXC001_SLV_NONE, 0x0}, + {AXC001_SLV_NONE, 0x0}, + {AXC001_SLV_DDR_PORT0, 0x0}, /* 0x8000_0000: DDR 0..256M */ + {AXC001_SLV_DDR_PORT0, 0x1}, /* 0x9000_0000: DDR 256..512M */ + {AXC001_SLV_DDR_PORT0, 0x2}, + {AXC001_SLV_DDR_PORT0, 0x3}, + {AXC001_SLV_NONE, 0x0}, + {AXC001_SLV_AXI_TUNNEL, 0xD}, + {AXC001_SLV_AXI_TUNNEL, 0xE}, /* MB: CREG, CGU... */ + {AXC001_SLV_AXI2APB, 0x0}, /* CPU Card local CREG, CGU... */ +}; + +/* + * memmap for CPU Card AXI Tunnel Master (for access by MB controllers) + * GMAC (MB) -> MB AXI Tunnel slave -> CPU Card AXI Tunnel Master -> DDR + */ +static const struct aperture axc001_axi_tunnel_memmap[16] = { + {AXC001_SLV_AXI_TUNNEL, 0x0}, + {AXC001_SLV_AXI_TUNNEL, 0x1}, + {AXC001_SLV_SRAM, 0x0}, + {AXC001_SLV_NONE, 0x0}, + {AXC001_SLV_NONE, 0x0}, + {AXC001_SLV_NONE, 0x0}, + {AXC001_SLV_NONE, 0x0}, + {AXC001_SLV_NONE, 0x0}, + {AXC001_SLV_DDR_PORT1, 0x0}, + {AXC001_SLV_DDR_PORT1, 0x1}, + {AXC001_SLV_DDR_PORT1, 0x2}, + {AXC001_SLV_DDR_PORT1, 0x3}, + {AXC001_SLV_NONE, 0x0}, + {AXC001_SLV_AXI_TUNNEL, 0xD}, + {AXC001_SLV_AXI_TUNNEL, 0xE}, + {AXC001_SLV_AXI2APB, 0x0}, +}; + +/* + * memmap for MB AXI Masters + * Same mem map for all perip controllers as well as MB AXI Tunnel Master + */ +static const struct aperture axs_mb_memmap[16] = { + {AXS_MB_SLV_SRAM, 0x0}, + {AXS_MB_SLV_SRAM, 0x0}, + {AXS_MB_SLV_NONE, 0x0}, + {AXS_MB_SLV_NONE, 0x0}, + {AXS_MB_SLV_NONE, 0x0}, + {AXS_MB_SLV_NONE, 0x0}, + {AXS_MB_SLV_NONE, 0x0}, + {AXS_MB_SLV_NONE, 0x0}, + {AXS_MB_SLV_AXI_TUNNEL_CPU, 0x8}, /* DDR on CPU Card */ + {AXS_MB_SLV_AXI_TUNNEL_CPU, 0x9}, /* DDR on CPU Card */ + {AXS_MB_SLV_AXI_TUNNEL_CPU, 0xA}, + {AXS_MB_SLV_AXI_TUNNEL_CPU, 0xB}, + {AXS_MB_SLV_NONE, 0x0}, + {AXS_MB_SLV_AXI_TUNNEL_HAPS, 0xD}, + {AXS_MB_SLV_CONTROL, 0x0}, /* MB Local CREG, CGU... */ + {AXS_MB_SLV_AXI_TUNNEL_CPU, 0xF}, +}; + +static noinline void __init +axs101_set_memmap(void __iomem *base, const struct aperture map[16]) +{ + unsigned int slave_select, slave_offset; + int i; + + slave_select = slave_offset = 0; + for (i = 0; i < 8; i++) { + slave_select |= map[i].slave_sel << (i << 2); + slave_offset |= map[i].slave_off << (i << 2); + } + + iowrite32(slave_select, base + 0x0); /* SLV0 */ + iowrite32(slave_offset, base + 0x8); /* OFFSET0 */ + + slave_select = slave_offset = 0; + for (i = 0; i < 8; i++) { + slave_select |= map[i+8].slave_sel << (i << 2); + slave_offset |= map[i+8].slave_off << (i << 2); + } + + iowrite32(slave_select, base + 0x4); /* SLV1 */ + iowrite32(slave_offset, base + 0xC); /* OFFSET1 */ +} + +static void __init axs101_early_init(void) +{ + int i; + + /* ARC 770D memory view */ + axs101_set_memmap((void __iomem *) CREG_CPU_ADDR_770, axc001_memmap); + iowrite32(1, (void __iomem *) CREG_CPU_ADDR_770_UPD); + + /* AXI tunnel memory map (incoming traffic from MB into CPU Card */ + axs101_set_memmap((void __iomem *) CREG_CPU_ADDR_TUNN, + axc001_axi_tunnel_memmap); + iowrite32(1, (void __iomem *) CREG_CPU_ADDR_TUNN_UPD); + + /* MB peripherals memory map */ + for (i = AXS_MB_MST_TUNNEL_CPU; i <= AXS_MB_MST_USB_OHCI; i++) + axs101_set_memmap((void __iomem *) AXS_MB_CREG + (i << 4), + axs_mb_memmap); + + iowrite32(0x3ff, (void __iomem *) AXS_MB_CREG + 0x100); /* Update */ + + /* GPIO pins 18 and 19 are used as UART rx and tx, respectively. */ + iowrite32(0x01, (void __iomem *) CREG_CPU_GPIO_UART_MUX); + + /* Set up the MB interrupt system: mux interrupts to GPIO7) */ + iowrite32(0x01, (void __iomem *) CREG_MB_IRQ_MUX); + + /* reset ethernet and ULPI interfaces */ + iowrite32(0x18, (void __iomem *) CREG_MB_SW_RESET); + + /* map GPIO 14:10 to ARC 9:5 (IRQ mux change for MB v2 onwards) */ + iowrite32(0x52, (void __iomem *) CREG_CPU_ARC770_IRQ_MUX); + + axs10x_early_init(); +} + +#endif /* CONFIG_AXS101 */ + +#ifdef CONFIG_AXS103 + +#define AXC003_CREG 0xF0001000 +#define AXC003_MST_AXI_TUNNEL 0 +#define AXC003_MST_HS38 1 + +#define CREG_CPU_AXI_M0_IRQ_MUX (AXC003_CREG + 0x440) +#define CREG_CPU_GPIO_UART_MUX (AXC003_CREG + 0x480) +#define CREG_CPU_TUN_IO_CTRL (AXC003_CREG + 0x494) + + +static void __init axs103_early_init(void) +{ +#ifdef CONFIG_ARC_MCIP + /* + * AXS103 configurations for SMP/QUAD configurations share device tree + * which defaults to 100 MHz. However recent failures of Quad config + * revealed P&R timing violations so clamp it down to safe 50 MHz + * Instead of duplicating defconfig/DT for SMP/QUAD, add a small hack + * of fudging the freq in DT + */ +#define AXS103_QUAD_CORE_CPU_FREQ_HZ 50000000 + + unsigned int num_cores = (read_aux_reg(ARC_REG_MCIP_BCR) >> 16) & 0x3F; + if (num_cores > 2) { + u32 freq; + int off = fdt_path_offset(initial_boot_params, "/cpu_card/core_clk"); + const struct fdt_property *prop; + + prop = fdt_get_property(initial_boot_params, off, + "assigned-clock-rates", NULL); + freq = be32_to_cpu(*(u32 *)(prop->data)); + + /* Patching .dtb in-place with new core clock value */ + if (freq != AXS103_QUAD_CORE_CPU_FREQ_HZ) { + freq = cpu_to_be32(AXS103_QUAD_CORE_CPU_FREQ_HZ); + fdt_setprop_inplace(initial_boot_params, off, + "assigned-clock-rates", &freq, sizeof(freq)); + } + } +#endif + + /* Memory maps already config in pre-bootloader */ + + /* set GPIO mux to UART */ + iowrite32(0x01, (void __iomem *) CREG_CPU_GPIO_UART_MUX); + + iowrite32((0x00100000U | 0x000C0000U | 0x00003322U), + (void __iomem *) CREG_CPU_TUN_IO_CTRL); + + /* Set up the AXS_MB interrupt system.*/ + iowrite32(12, (void __iomem *) (CREG_CPU_AXI_M0_IRQ_MUX + + (AXC003_MST_HS38 << 2))); + + /* connect ICTL - Main Board with GPIO line */ + iowrite32(0x01, (void __iomem *) CREG_MB_IRQ_MUX); + + axs10x_print_board_ver(AXC003_CREG + 4088, "AXC003 CPU Card"); + + axs10x_early_init(); +} +#endif + +#ifdef CONFIG_AXS101 + +static const char *axs101_compat[] __initconst = { + "snps,axs101", + NULL, +}; + +MACHINE_START(AXS101, "axs101") + .dt_compat = axs101_compat, + .init_early = axs101_early_init, +MACHINE_END + +#endif /* CONFIG_AXS101 */ + +#ifdef CONFIG_AXS103 + +static const char *axs103_compat[] __initconst = { + "snps,axs103", + NULL, +}; + +MACHINE_START(AXS103, "axs103") + .dt_compat = axs103_compat, + .init_early = axs103_early_init, +MACHINE_END + +/* + * For the VDK OS-kit, to get the offset to pid and command fields + */ +char coware_swa_pid_offset[TASK_PID]; +char coware_swa_comm_offset[TASK_COMM]; + +#endif /* CONFIG_AXS103 */ diff --git a/arch/arc/plat-hsdk/Kconfig b/arch/arc/plat-hsdk/Kconfig new file mode 100644 index 0000000000..a2d10c29fb --- /dev/null +++ b/arch/arc/plat-hsdk/Kconfig @@ -0,0 +1,14 @@ +# SPDX-License-Identifier: GPL-2.0-only +# Copyright (C) 2017 Synopsys, Inc. (www.synopsys.com) +# + +menuconfig ARC_SOC_HSDK + bool "ARC HS Development Kit SOC" + depends on ISA_ARCV2 + select ARC_HAS_ACCL_REGS + select ARC_IRQ_NO_AUTOSAVE + select ARC_FPU_SAVE_RESTORE + select CLK_HSDK + select RESET_CONTROLLER + select RESET_HSDK + select HAVE_PCI diff --git a/arch/arc/plat-hsdk/Makefile b/arch/arc/plat-hsdk/Makefile new file mode 100644 index 0000000000..bb2921e824 --- /dev/null +++ b/arch/arc/plat-hsdk/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Copyright (C) 2017 Synopsys, Inc. (www.synopsys.com) +# + +obj-y := platform.o diff --git a/arch/arc/plat-hsdk/platform.c b/arch/arc/plat-hsdk/platform.c new file mode 100644 index 0000000000..c4a875b223 --- /dev/null +++ b/arch/arc/plat-hsdk/platform.c @@ -0,0 +1,326 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * ARC HSDK Platform support code + * + * Copyright (C) 2017 Synopsys, Inc. (www.synopsys.com) + */ + +#include <linux/init.h> +#include <linux/of_fdt.h> +#include <linux/libfdt.h> +#include <linux/smp.h> +#include <asm/arcregs.h> +#include <asm/io.h> +#include <asm/mach_desc.h> + +int arc_hsdk_axi_dmac_coherent __section(".data") = 0; + +#define ARC_CCM_UNUSED_ADDR 0x60000000 + + +#define ARC_PERIPHERAL_BASE 0xf0000000 +#define CREG_BASE (ARC_PERIPHERAL_BASE + 0x1000) + +#define SDIO_BASE (ARC_PERIPHERAL_BASE + 0xA000) +#define SDIO_UHS_REG_EXT (SDIO_BASE + 0x108) +#define SDIO_UHS_REG_EXT_DIV_2 (2 << 30) + +#define HSDK_GPIO_INTC (ARC_PERIPHERAL_BASE + 0x3000) + +static void __init hsdk_enable_gpio_intc_wire(void) +{ + /* + * Peripherals on CPU Card are wired to cpu intc via intermediate + * DW APB GPIO blocks (mainly for debouncing) + * + * --------------------- + * | snps,archs-intc | + * --------------------- + * | + * ---------------------- + * | snps,archs-idu-intc | + * ---------------------- + * | | | | | + * | [eth] [USB] [... other peripherals] + * | + * ------------------- + * | snps,dw-apb-intc | + * ------------------- + * | | | | + * [Bt] [HAPS] [... other peripherals] + * + * Current implementation of "irq-dw-apb-ictl" driver doesn't work well + * with stacked INTCs. In particular problem happens if its master INTC + * not yet instantiated. See discussion here - + * https://lore.kernel.org/lkml/54F6FE2C.7020309@synopsys.com + * + * So setup the first gpio block as a passive pass thru and hide it from + * DT hardware topology - connect intc directly to cpu intc + * The GPIO "wire" needs to be init nevertheless (here) + * + * One side adv is that peripheral interrupt handling avoids one nested + * intc ISR hop + * + * According to HSDK User's Manual [1], "Table 2 Interrupt Mapping" + * we have the following GPIO input lines used as sources of interrupt: + * - GPIO[0] - Bluetooth interrupt of RS9113 module + * - GPIO[2] - HAPS interrupt (on HapsTrak 3 connector) + * - GPIO[3] - Audio codec (MAX9880A) interrupt + * - GPIO[8-23] - Available on Arduino and PMOD_x headers + * For now there's no use of Arduino and PMOD_x headers in Linux + * use-case so we only enable lines 0, 2 and 3. + * + * [1] https://github.com/foss-for-synopsys-dwc-arc-processors/ARC-Development-Systems-Forum/wiki/docs/ARC_HSDK_User_Guide.pdf + */ +#define GPIO_INTEN (HSDK_GPIO_INTC + 0x30) +#define GPIO_INTMASK (HSDK_GPIO_INTC + 0x34) +#define GPIO_INTTYPE_LEVEL (HSDK_GPIO_INTC + 0x38) +#define GPIO_INT_POLARITY (HSDK_GPIO_INTC + 0x3c) +#define GPIO_INT_CONNECTED_MASK 0x0d + + iowrite32(0xffffffff, (void __iomem *) GPIO_INTMASK); + iowrite32(~GPIO_INT_CONNECTED_MASK, (void __iomem *) GPIO_INTMASK); + iowrite32(0x00000000, (void __iomem *) GPIO_INTTYPE_LEVEL); + iowrite32(0xffffffff, (void __iomem *) GPIO_INT_POLARITY); + iowrite32(GPIO_INT_CONNECTED_MASK, (void __iomem *) GPIO_INTEN); +} + +static int __init hsdk_tweak_node_coherency(const char *path, bool coherent) +{ + void *fdt = initial_boot_params; + const void *prop; + int node, ret; + bool dt_coh_set; + + node = fdt_path_offset(fdt, path); + if (node < 0) + goto tweak_fail; + + prop = fdt_getprop(fdt, node, "dma-coherent", &ret); + if (!prop && ret != -FDT_ERR_NOTFOUND) + goto tweak_fail; + + dt_coh_set = ret != -FDT_ERR_NOTFOUND; + ret = 0; + + /* need to remove "dma-coherent" property */ + if (dt_coh_set && !coherent) + ret = fdt_delprop(fdt, node, "dma-coherent"); + + /* need to set "dma-coherent" property */ + if (!dt_coh_set && coherent) + ret = fdt_setprop(fdt, node, "dma-coherent", NULL, 0); + + if (ret < 0) + goto tweak_fail; + + return 0; + +tweak_fail: + pr_err("failed to tweak %s to %scoherent\n", path, coherent ? "" : "non"); + return -EFAULT; +} + +enum hsdk_axi_masters { + M_HS_CORE = 0, + M_HS_RTT, + M_AXI_TUN, + M_HDMI_VIDEO, + M_HDMI_AUDIO, + M_USB_HOST, + M_ETHERNET, + M_SDIO, + M_GPU, + M_DMAC_0, + M_DMAC_1, + M_DVFS +}; + +#define UPDATE_VAL 1 + +/* + * This is modified configuration of AXI bridge. Default settings + * are specified in "Table 111 CREG Address Decoder register reset values". + * + * AXI_M_m_SLV{0|1} - Slave Select register for master 'm'. + * Possible slaves are: + * - 0 => no slave selected + * - 1 => DDR controller port #1 + * - 2 => SRAM controller + * - 3 => AXI tunnel + * - 4 => EBI controller + * - 5 => ROM controller + * - 6 => AXI2APB bridge + * - 7 => DDR controller port #2 + * - 8 => DDR controller port #3 + * - 9 => HS38x4 IOC + * - 10 => HS38x4 DMI + * AXI_M_m_OFFSET{0|1} - Addr Offset register for master 'm' + * + * Please read ARC HS Development IC Specification, section 17.2 for more + * information about apertures configuration. + * + * m master AXI_M_m_SLV0 AXI_M_m_SLV1 AXI_M_m_OFFSET0 AXI_M_m_OFFSET1 + * 0 HS (CBU) 0x11111111 0x63111111 0xFEDCBA98 0x0E543210 + * 1 HS (RTT) 0x77777777 0x77777777 0xFEDCBA98 0x76543210 + * 2 AXI Tunnel 0x88888888 0x88888888 0xFEDCBA98 0x76543210 + * 3 HDMI-VIDEO 0x77777777 0x77777777 0xFEDCBA98 0x76543210 + * 4 HDMI-ADUIO 0x77777777 0x77777777 0xFEDCBA98 0x76543210 + * 5 USB-HOST 0x77777777 0x77999999 0xFEDCBA98 0x76DCBA98 + * 6 ETHERNET 0x77777777 0x77999999 0xFEDCBA98 0x76DCBA98 + * 7 SDIO 0x77777777 0x77999999 0xFEDCBA98 0x76DCBA98 + * 8 GPU 0x77777777 0x77777777 0xFEDCBA98 0x76543210 + * 9 DMAC (port #1) 0x77777777 0x77777777 0xFEDCBA98 0x76543210 + * 10 DMAC (port #2) 0x77777777 0x77777777 0xFEDCBA98 0x76543210 + * 11 DVFS 0x00000000 0x60000000 0x00000000 0x00000000 + */ + +#define CREG_AXI_M_SLV0(m) ((void __iomem *)(CREG_BASE + 0x20 * (m))) +#define CREG_AXI_M_SLV1(m) ((void __iomem *)(CREG_BASE + 0x20 * (m) + 0x04)) +#define CREG_AXI_M_OFT0(m) ((void __iomem *)(CREG_BASE + 0x20 * (m) + 0x08)) +#define CREG_AXI_M_OFT1(m) ((void __iomem *)(CREG_BASE + 0x20 * (m) + 0x0C)) +#define CREG_AXI_M_UPDT(m) ((void __iomem *)(CREG_BASE + 0x20 * (m) + 0x14)) + +#define CREG_AXI_M_HS_CORE_BOOT ((void __iomem *)(CREG_BASE + 0x010)) + +#define CREG_PAE ((void __iomem *)(CREG_BASE + 0x180)) +#define CREG_PAE_UPDT ((void __iomem *)(CREG_BASE + 0x194)) + +static void __init hsdk_init_memory_bridge_axi_dmac(void) +{ + bool coherent = !!arc_hsdk_axi_dmac_coherent; + u32 axi_m_slv1, axi_m_oft1; + + /* + * Don't tweak memory bridge configuration if we failed to tweak DTB + * as we will end up in a inconsistent state. + */ + if (hsdk_tweak_node_coherency("/soc/dmac@80000", coherent)) + return; + + if (coherent) { + axi_m_slv1 = 0x77999999; + axi_m_oft1 = 0x76DCBA98; + } else { + axi_m_slv1 = 0x77777777; + axi_m_oft1 = 0x76543210; + } + + writel(0x77777777, CREG_AXI_M_SLV0(M_DMAC_0)); + writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_DMAC_0)); + writel(axi_m_slv1, CREG_AXI_M_SLV1(M_DMAC_0)); + writel(axi_m_oft1, CREG_AXI_M_OFT1(M_DMAC_0)); + writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_DMAC_0)); + + writel(0x77777777, CREG_AXI_M_SLV0(M_DMAC_1)); + writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_DMAC_1)); + writel(axi_m_slv1, CREG_AXI_M_SLV1(M_DMAC_1)); + writel(axi_m_oft1, CREG_AXI_M_OFT1(M_DMAC_1)); + writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_DMAC_1)); +} + +static void __init hsdk_init_memory_bridge(void) +{ + u32 reg; + + /* + * M_HS_CORE has one unique register - BOOT. + * We need to clean boot mirror (BOOT[1:0]) bits in them to avoid first + * aperture to be masked by 'boot mirror'. + */ + reg = readl(CREG_AXI_M_HS_CORE_BOOT) & (~0x3); + writel(reg, CREG_AXI_M_HS_CORE_BOOT); + writel(0x11111111, CREG_AXI_M_SLV0(M_HS_CORE)); + writel(0x63111111, CREG_AXI_M_SLV1(M_HS_CORE)); + writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_HS_CORE)); + writel(0x0E543210, CREG_AXI_M_OFT1(M_HS_CORE)); + writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_HS_CORE)); + + writel(0x77777777, CREG_AXI_M_SLV0(M_HS_RTT)); + writel(0x77777777, CREG_AXI_M_SLV1(M_HS_RTT)); + writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_HS_RTT)); + writel(0x76543210, CREG_AXI_M_OFT1(M_HS_RTT)); + writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_HS_RTT)); + + writel(0x88888888, CREG_AXI_M_SLV0(M_AXI_TUN)); + writel(0x88888888, CREG_AXI_M_SLV1(M_AXI_TUN)); + writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_AXI_TUN)); + writel(0x76543210, CREG_AXI_M_OFT1(M_AXI_TUN)); + writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_AXI_TUN)); + + writel(0x77777777, CREG_AXI_M_SLV0(M_HDMI_VIDEO)); + writel(0x77777777, CREG_AXI_M_SLV1(M_HDMI_VIDEO)); + writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_HDMI_VIDEO)); + writel(0x76543210, CREG_AXI_M_OFT1(M_HDMI_VIDEO)); + writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_HDMI_VIDEO)); + + writel(0x77777777, CREG_AXI_M_SLV0(M_HDMI_AUDIO)); + writel(0x77777777, CREG_AXI_M_SLV1(M_HDMI_AUDIO)); + writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_HDMI_AUDIO)); + writel(0x76543210, CREG_AXI_M_OFT1(M_HDMI_AUDIO)); + writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_HDMI_AUDIO)); + + writel(0x77777777, CREG_AXI_M_SLV0(M_USB_HOST)); + writel(0x77999999, CREG_AXI_M_SLV1(M_USB_HOST)); + writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_USB_HOST)); + writel(0x76DCBA98, CREG_AXI_M_OFT1(M_USB_HOST)); + writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_USB_HOST)); + + writel(0x77777777, CREG_AXI_M_SLV0(M_ETHERNET)); + writel(0x77999999, CREG_AXI_M_SLV1(M_ETHERNET)); + writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_ETHERNET)); + writel(0x76DCBA98, CREG_AXI_M_OFT1(M_ETHERNET)); + writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_ETHERNET)); + + writel(0x77777777, CREG_AXI_M_SLV0(M_SDIO)); + writel(0x77999999, CREG_AXI_M_SLV1(M_SDIO)); + writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_SDIO)); + writel(0x76DCBA98, CREG_AXI_M_OFT1(M_SDIO)); + writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_SDIO)); + + writel(0x77777777, CREG_AXI_M_SLV0(M_GPU)); + writel(0x77777777, CREG_AXI_M_SLV1(M_GPU)); + writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_GPU)); + writel(0x76543210, CREG_AXI_M_OFT1(M_GPU)); + writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_GPU)); + + writel(0x00000000, CREG_AXI_M_SLV0(M_DVFS)); + writel(0x60000000, CREG_AXI_M_SLV1(M_DVFS)); + writel(0x00000000, CREG_AXI_M_OFT0(M_DVFS)); + writel(0x00000000, CREG_AXI_M_OFT1(M_DVFS)); + writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_DVFS)); + + hsdk_init_memory_bridge_axi_dmac(); + + /* + * PAE remapping for DMA clients does not work due to an RTL bug, so + * CREG_PAE register must be programmed to all zeroes, otherwise it + * will cause problems with DMA to/from peripherals even if PAE40 is + * not used. + */ + writel(0x00000000, CREG_PAE); + writel(UPDATE_VAL, CREG_PAE_UPDT); +} + +static void __init hsdk_init_early(void) +{ + hsdk_init_memory_bridge(); + + /* + * Switch SDIO external ciu clock divider from default div-by-8 to + * minimum possible div-by-2. + */ + iowrite32(SDIO_UHS_REG_EXT_DIV_2, (void __iomem *) SDIO_UHS_REG_EXT); + + hsdk_enable_gpio_intc_wire(); +} + +static const char *hsdk_compat[] __initconst = { + "snps,hsdk", + NULL, +}; + +MACHINE_START(SIMULATION, "hsdk") + .dt_compat = hsdk_compat, + .init_early = hsdk_init_early, +MACHINE_END diff --git a/arch/arc/plat-sim/Makefile b/arch/arc/plat-sim/Makefile new file mode 100644 index 0000000000..ea9389bf8b --- /dev/null +++ b/arch/arc/plat-sim/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Copyright (C) 2011-2012 Synopsys, Inc. (www.synopsys.com) +# + +obj-y := platform.o diff --git a/arch/arc/plat-sim/platform.c b/arch/arc/plat-sim/platform.c new file mode 100644 index 0000000000..2bde2a6e33 --- /dev/null +++ b/arch/arc/plat-sim/platform.c @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * ARC simulation Platform support code + * + * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com) + */ + +#include <linux/init.h> +#include <asm/mach_desc.h> + +/*----------------------- Machine Descriptions ------------------------------ + * + * Machine description is simply a set of platform/board specific callbacks + * This is not directly related to DeviceTree based dynamic device creation, + * however as part of early device tree scan, we also select the right + * callback set, by matching the DT compatible name. + */ + +static const char *simulation_compat[] __initconst = { +#ifdef CONFIG_ISA_ARCOMPACT + "snps,nsim", + "snps,nsimosci", +#else + "snps,nsimosci_hs", + "snps,zebu_hs", +#endif + NULL, +}; + +MACHINE_START(SIMULATION, "simulation") + .dt_compat = simulation_compat, +MACHINE_END diff --git a/arch/arc/plat-tb10x/Kconfig b/arch/arc/plat-tb10x/Kconfig new file mode 100644 index 0000000000..158d53aad4 --- /dev/null +++ b/arch/arc/plat-tb10x/Kconfig @@ -0,0 +1,20 @@ +# SPDX-License-Identifier: GPL-2.0-only +# Abilis Systems TB10x platform kernel configuration file +# +# Author: Christian Ruppert <christian.ruppert@abilis.com> +# + + +menuconfig ARC_PLAT_TB10X + bool "Abilis TB10x" + select PINCTRL + select PINCTRL_TB10X + select PINMUX + select GPIOLIB + select GPIO_TB10X + select TB10X_IRQC + help + Support for platforms based on the TB10x home media gateway SOC by + Abilis Systems. TB10x is based on the ARC700 CPU architecture. + Say Y if you are building a kernel for one of the SOCs in this + series (e.g. TB100 or TB101). If in doubt say N. diff --git a/arch/arc/plat-tb10x/Makefile b/arch/arc/plat-tb10x/Makefile new file mode 100644 index 0000000000..8e97d454e7 --- /dev/null +++ b/arch/arc/plat-tb10x/Makefile @@ -0,0 +1,10 @@ +# SPDX-License-Identifier: GPL-2.0-only +# Abilis Systems TB10x platform Makefile +# +# Author: Christian Ruppert <christian.ruppert@abilis.com> +# + + +KBUILD_CFLAGS += -Iarch/arc/plat-tb10x/include + +obj-y += tb10x.o diff --git a/arch/arc/plat-tb10x/tb10x.c b/arch/arc/plat-tb10x/tb10x.c new file mode 100644 index 0000000000..11d23420f9 --- /dev/null +++ b/arch/arc/plat-tb10x/tb10x.c @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Abilis Systems TB10x platform initialisation + * + * Copyright (C) Abilis Systems 2012 + * + * Author: Christian Ruppert <christian.ruppert@abilis.com> + */ + +#include <linux/init.h> +#include <asm/mach_desc.h> + +static const char *tb10x_compat[] __initdata = { + "abilis,arc-tb10x", + NULL, +}; + +MACHINE_START(TB10x, "tb10x") + .dt_compat = tb10x_compat, +MACHINE_END |