summaryrefslogtreecommitdiffstats
path: root/arch/arm/Kconfig.debug
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/Kconfig.debug')
-rw-r--r--arch/arm/Kconfig.debug1854
1 files changed, 1854 insertions, 0 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
new file mode 100644
index 0000000000..b407b7b9b7
--- /dev/null
+++ b/arch/arm/Kconfig.debug
@@ -0,0 +1,1854 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config ARM_PTDUMP_CORE
+ def_bool n
+
+config ARM_PTDUMP_DEBUGFS
+ bool "Export kernel pagetable layout to userspace via debugfs"
+ depends on DEBUG_KERNEL
+ depends on MMU
+ select ARM_PTDUMP_CORE
+ select DEBUG_FS
+ help
+ Say Y here if you want to show the kernel pagetable layout in a
+ debugfs file. This information is only useful for kernel developers
+ who are working in architecture specific areas of the kernel.
+ It is probably not a good idea to enable this feature in a production
+ kernel.
+ If in doubt, say "N"
+
+config DEBUG_WX
+ bool "Warn on W+X mappings at boot"
+ depends on MMU
+ select ARM_PTDUMP_CORE
+ help
+ Generate a warning if any W+X mappings are found at boot.
+
+ This is useful for discovering cases where the kernel is leaving
+ W+X mappings after applying NX, as such mappings are a security risk.
+
+ Look for a message in dmesg output like this:
+
+ arm/mm: Checked W+X mappings: passed, no W+X pages found.
+
+ or like this, if the check failed:
+
+ arm/mm: Checked W+X mappings: FAILED, <N> W+X pages found.
+
+ Note that even if the check fails, your kernel is possibly
+ still fine, as W+X mappings are not a security hole in
+ themselves, what they do is that they make the exploitation
+ of other unfixed kernel bugs easier.
+
+ There is no runtime or memory usage effect of this option
+ once the kernel has booted up - it's a one time check.
+
+ If in doubt, say "Y".
+
+choice
+ prompt "Choose kernel unwinder"
+ default UNWINDER_ARM if AEABI
+ default UNWINDER_FRAME_POINTER if !AEABI
+ help
+ This determines which method will be used for unwinding kernel stack
+ traces for panics, oopses, bugs, warnings, perf, /proc/<pid>/stack,
+ livepatch, lockdep, and more.
+
+config UNWINDER_FRAME_POINTER
+ bool "Frame pointer unwinder"
+ depends on !THUMB2_KERNEL
+ select ARCH_WANT_FRAME_POINTERS
+ select FRAME_POINTER
+ help
+ This option enables the frame pointer unwinder for unwinding
+ kernel stack traces.
+
+config UNWINDER_ARM
+ bool "ARM EABI stack unwinder"
+ depends on AEABI
+ select ARM_UNWIND
+ help
+ This option enables stack unwinding support in the kernel
+ using the information automatically generated by the
+ compiler. The resulting kernel image is slightly bigger but
+ the performance is not affected. Currently, this feature
+ only works with EABI compilers.
+
+endchoice
+
+config ARM_UNWIND
+ bool
+
+config BACKTRACE_VERBOSE
+ bool "Verbose backtrace"
+ depends on EXPERT
+ help
+ When the kernel produces a warning or oops, the kernel prints a
+ trace of the call chain. This option controls whether we include
+ the numeric addresses or only include the symbolic information.
+
+ In most cases, say N here, unless you are intending to debug the
+ kernel and have access to the kernel binary image.
+
+config FRAME_POINTER
+ bool
+
+config DEBUG_USER
+ bool "Verbose user fault messages"
+ help
+ When a user program crashes due to an exception, the kernel can
+ print a brief message explaining what the problem was. This is
+ sometimes helpful for debugging but serves no purpose on a
+ production system. Most people should say N here.
+
+ In addition, you need to pass user_debug=N on the kernel command
+ line to enable this feature. N consists of the sum of:
+
+ 1 - undefined instruction events
+ 2 - system calls
+ 4 - invalid data aborts
+ 8 - SIGSEGV faults
+ 16 - SIGBUS faults
+
+# These options are only for real kernel hackers who want to get their hands dirty.
+config DEBUG_LL
+ bool "Kernel low-level debugging functions (read help!)"
+ depends on DEBUG_KERNEL
+ help
+ Say Y here to include definitions of printascii, printch, printhex
+ in the kernel. This is helpful if you are debugging code that
+ executes before the console is initialized.
+
+ Note that selecting this option will limit the kernel to a single
+ UART definition, as specified below. Attempting to boot the kernel
+ image on a different platform *will not work*, so this option should
+ not be enabled for kernels that are intended to be portable.
+
+choice
+ prompt "Kernel low-level debugging port"
+ depends on DEBUG_LL
+
+ config DEBUG_ALPINE_UART0
+ bool "Kernel low-level debugging messages via Alpine UART0"
+ depends on ARCH_ALPINE
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Alpine based platforms.
+
+ config DEBUG_ASM9260_UART
+ bool "Kernel low-level debugging via asm9260 UART"
+ depends on MACH_ASM9260
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to an UART or USART port on asm9260 based
+ machines.
+
+ DEBUG_UART_PHYS | DEBUG_UART_VIRT
+
+ 0x80000000 | 0xf0000000 | UART0
+ 0x80004000 | 0xf0004000 | UART1
+ 0x80008000 | 0xf0008000 | UART2
+ 0x8000c000 | 0xf000c000 | UART3
+ 0x80010000 | 0xf0010000 | UART4
+ 0x80014000 | 0xf0014000 | UART5
+ 0x80018000 | 0xf0018000 | UART6
+ 0x8001c000 | 0xf001c000 | UART7
+ 0x80020000 | 0xf0020000 | UART8
+ 0x80024000 | 0xf0024000 | UART9
+
+ config DEBUG_AT91_RM9200_DBGU
+ bool "Kernel low-level debugging on AT91RM9200, AT91SAM9, SAM9X60 DBGU"
+ select DEBUG_AT91_UART
+ depends on SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAM9X60
+ help
+ Say Y here if you want kernel low-level debugging support
+ on the DBGU port of:
+ at91rm9200, at91sam9260, at91sam9g20, at91sam9261,
+ at91sam9g10, at91sam9n12, at91sam9rl64, at91sam9x5, sam9x60
+
+ config DEBUG_AT91_SAM9263_DBGU
+ bool "Kernel low-level debugging on AT91SAM{9263,9G45,A5D3} DBGU"
+ select DEBUG_AT91_UART
+ depends on SOC_AT91SAM9 || SOC_SAMA5D3
+ help
+ Say Y here if you want kernel low-level debugging support
+ on the DBGU port of:
+ at91sam9263, at91sam9g45, at91sam9m10,
+ sama5d3
+
+ config DEBUG_AT91_SAMA5D2_UART1
+ bool "Kernel low-level debugging on SAMA5D2 UART1"
+ select DEBUG_AT91_UART
+ depends on SOC_SAMA5D2
+ help
+ Say Y here if you want kernel low-level debugging support
+ on the UART1 port of sama5d2.
+
+ config DEBUG_AT91_SAMA5D4_USART3
+ bool "Kernel low-level debugging on SAMA5D4 USART3"
+ select DEBUG_AT91_UART
+ depends on SOC_SAMA5D4
+ help
+ Say Y here if you want kernel low-level debugging support
+ on the USART3 port of sama5d4.
+
+ config DEBUG_AT91_SAMV7_USART1
+ bool "Kernel low-level debugging via SAMV7 USART1"
+ select DEBUG_AT91_UART
+ depends on SOC_SAMV7
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the USART1 port on SAMV7 based
+ machines.
+
+ config DEBUG_AT91_SAMA7G5_FLEXCOM3
+ bool "Kernel low-level debugging on SAMA7G5 FLEXCOM3"
+ select DEBUG_AT91_UART
+ depends on SOC_SAMA7G5
+ help
+ Say Y here if you want kernel low-level debugging support
+ on the FLEXCOM3 port of SAMA7G5.
+
+ config DEBUG_AT91_LAN966_FLEXCOM
+ bool "Kernel low-level debugging on LAN966 FLEXCOM USART"
+ select DEBUG_AT91_UART
+ depends on SOC_LAN966
+ help
+ Say Y here if you want kernel low-level debugging support
+ on the FLEXCOM port of LAN966.
+
+ DEBUG_UART_PHYS | DEBUG_UART_VIRT
+
+ 0xe0040200 | 0xfd040200 | FLEXCOM0
+ 0xe0044200 | 0xfd044200 | FLEXCOM1
+ 0xe0060200 | 0xfd060200 | FLEXCOM2
+ 0xe0064200 | 0xfd064200 | FLEXCOM3
+ 0xe0070200 | 0xfd070200 | FLEXCOM4
+
+ By default, enabling FLEXCOM3 port. Based on requirement, use
+ DEBUG_UART_PHYS and DEBUG_UART_VIRT configurations from above
+ table.
+
+ config DEBUG_BCM2835
+ bool "Kernel low-level debugging on BCM2835 PL011 UART"
+ depends on ARCH_BCM2835 && ARCH_MULTI_V6
+ select DEBUG_UART_PL01X
+
+ config DEBUG_BCM2836
+ bool "Kernel low-level debugging on BCM2836 PL011 UART"
+ depends on ARCH_BCM2835 && ARCH_MULTI_V7
+ select DEBUG_UART_PL01X
+
+ config DEBUG_BCM_5301X
+ bool "Kernel low-level debugging on BCM5301X/NSP UART1"
+ depends on ARCH_BCM_5301X || ARCH_BCM_NSP
+ select DEBUG_UART_8250
+
+ config DEBUG_BCM_HR2
+ bool "Kernel low-level debugging on Hurricane 2 UART2"
+ depends on ARCH_BCM_HR2
+ select DEBUG_UART_8250
+
+ config DEBUG_BCM_IPROC_UART3
+ bool "Kernel low-level debugging on BCM IPROC UART3"
+ depends on ARCH_BCM_CYGNUS
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the third serial port on these devices.
+
+ config DEBUG_BCM_KONA_UART
+ bool "Kernel low-level debugging messages via BCM KONA UART"
+ depends on ARCH_BCM_MOBILE
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Broadcom SoC platforms.
+ This low level debug works for Broadcom
+ mobile SoCs in the Kona family of chips (e.g. bcm28155,
+ bcm11351, etc...)
+
+ config DEBUG_BCM63XX_UART
+ bool "Kernel low-level debugging on BCM63XX UART"
+ depends on ARCH_BCMBCA
+
+ config DEBUG_BERLIN_UART
+ bool "Marvell Berlin SoC Debug UART"
+ depends on ARCH_BERLIN
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Marvell Berlin SoC based platforms.
+
+ config DEBUG_BRCMSTB_UART
+ bool "Use BRCMSTB UART for low-level debug"
+ depends on ARCH_BRCMSTB
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the first serial port on these devices. The
+ UART physical and virtual address is automatically provided
+ based on the chip identification register value.
+
+ If you have a Broadcom STB chip and would like early print
+ messages to appear over the UART, select this option.
+
+ config DEBUG_CLPS711X_UART1
+ bool "Kernel low-level debugging messages via UART1"
+ depends on ARCH_CLPS711X
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the first serial port on these devices.
+
+ config DEBUG_CLPS711X_UART2
+ bool "Kernel low-level debugging messages via UART2"
+ depends on ARCH_CLPS711X
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the second serial port on these devices.
+
+ config DEBUG_DAVINCI_DA8XX_UART1
+ bool "Kernel low-level debugging on DaVinci DA8XX using UART1"
+ depends on ARCH_DAVINCI_DA8XX
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART1 serial port on DaVinci DA8XX devices.
+
+ config DEBUG_DAVINCI_DA8XX_UART2
+ bool "Kernel low-level debugging on DaVinci DA8XX using UART2"
+ depends on ARCH_DAVINCI_DA8XX
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART2 serial port on DaVinci DA8XX devices.
+
+ config DEBUG_DC21285_PORT
+ bool "Kernel low-level debugging messages via footbridge serial port"
+ depends on FOOTBRIDGE
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the serial port in the DC21285 (Footbridge).
+
+ config DEBUG_DIGICOLOR_UA0
+ bool "Kernel low-level debugging messages via Digicolor UA0"
+ depends on ARCH_DIGICOLOR
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the UA0 serial port in the CX92755.
+
+ config DEBUG_EP93XX
+ bool "Kernel low-level debugging messages via ep93xx UART"
+ depends on ARCH_EP93XX
+ select DEBUG_UART_PL01X
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Cirrus Logic EP93xx based platforms.
+
+ config DEBUG_FOOTBRIDGE_COM1
+ bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
+ depends on FOOTBRIDGE
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the 8250 at PCI COM1.
+
+ config DEBUG_GEMINI
+ bool "Kernel low-level debugging messages via Cortina Systems Gemini UART"
+ depends on ARCH_GEMINI
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Cortina Gemini based platforms.
+
+ config DEBUG_HI3620_UART
+ bool "Hisilicon HI3620 Debug UART"
+ depends on ARCH_HI3xxx
+ select DEBUG_UART_PL01X
+ help
+ Say Y here if you want kernel low-level debugging support
+ on HI3620 UART.
+
+ config DEBUG_HIGHBANK_UART
+ bool "Kernel low-level debugging messages via Highbank UART"
+ depends on ARCH_HIGHBANK
+ select DEBUG_UART_PL01X
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the UART on Highbank based devices.
+
+ config DEBUG_HIP01_UART
+ bool "Hisilicon Hip01 Debug UART"
+ depends on ARCH_HIP01
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on HIP01 UART.
+
+ config DEBUG_HIP04_UART
+ bool "Hisilicon HiP04 Debug UART"
+ depends on ARCH_HIP04
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on HIP04 UART.
+
+ config DEBUG_HIX5HD2_UART
+ bool "Hisilicon Hix5hd2 Debug UART"
+ depends on ARCH_HIX5HD2
+ select DEBUG_UART_PL01X
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Hix5hd2 UART.
+
+ config DEBUG_IMX1_UART
+ bool "i.MX1 Debug UART"
+ depends on SOC_IMX1
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX1.
+
+ config DEBUG_IMX23_UART
+ bool "i.MX23 Debug UART"
+ depends on SOC_IMX23
+ select DEBUG_UART_PL01X
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX23.
+
+ config DEBUG_IMX25_UART
+ bool "i.MX25 Debug UART"
+ depends on SOC_IMX25
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX25.
+
+ config DEBUG_IMX27_UART
+ bool "i.MX27 Debug UART"
+ depends on SOC_IMX27
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX27.
+
+ config DEBUG_IMX28_UART
+ bool "i.MX28 Debug UART"
+ depends on SOC_IMX28
+ select DEBUG_UART_PL01X
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX28.
+
+ config DEBUG_IMX31_UART
+ bool "i.MX31 Debug UART"
+ depends on SOC_IMX31
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX31.
+
+ config DEBUG_IMX35_UART
+ bool "i.MX35 Debug UART"
+ depends on SOC_IMX35
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX35.
+
+ config DEBUG_IMX50_UART
+ bool "i.MX50 Debug UART"
+ depends on SOC_IMX50
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX50.
+
+ config DEBUG_IMX51_UART
+ bool "i.MX51 Debug UART"
+ depends on SOC_IMX51
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX51.
+
+ config DEBUG_IMX53_UART
+ bool "i.MX53 Debug UART"
+ depends on SOC_IMX53
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX53.
+
+ config DEBUG_IMX6Q_UART
+ bool "i.MX6Q/DL Debug UART"
+ depends on SOC_IMX6Q
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX6Q/DL.
+
+ config DEBUG_IMX6SL_UART
+ bool "i.MX6SL Debug UART"
+ depends on SOC_IMX6SL
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX6SL.
+
+ config DEBUG_IMX6SX_UART
+ bool "i.MX6SX Debug UART"
+ depends on SOC_IMX6SX
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX6SX.
+
+ config DEBUG_IMX6UL_UART
+ bool "i.MX6UL Debug UART"
+ depends on SOC_IMX6UL
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX6UL.
+
+ config DEBUG_IMX7D_UART
+ bool "i.MX7D Debug UART"
+ depends on SOC_IMX7D
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX7D.
+
+ config DEBUG_INTEGRATOR
+ bool "Kernel low-level debugging messages via ARM Integrator UART"
+ depends on ARCH_INTEGRATOR
+ select DEBUG_UART_PL01X
+ help
+ Say Y here if you want kernel low-level debugging support
+ on ARM Integrator platforms.
+
+ config DEBUG_KEYSTONE_UART0
+ bool "Kernel low-level debugging on KEYSTONE2 using UART0"
+ depends on ARCH_KEYSTONE
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART0 serial port on KEYSTONE2 devices.
+
+ config DEBUG_KEYSTONE_UART1
+ bool "Kernel low-level debugging on KEYSTONE2 using UART1"
+ depends on ARCH_KEYSTONE
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART1 serial port on KEYSTONE2 devices.
+
+ config DEBUG_LPC18XX_UART0
+ bool "Kernel low-level debugging via LPC18xx/43xx UART0"
+ depends on ARCH_LPC18XX
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on NXP LPC18xx/43xx UART0.
+
+ config DEBUG_LPC32XX
+ bool "Kernel low-level debugging messages via NXP LPC32xx UART"
+ depends on ARCH_LPC32XX
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on NXP LPC32xx based platforms.
+
+ config DEBUG_MESON_UARTAO
+ bool "Kernel low-level debugging via Meson6 UARTAO"
+ depends on ARCH_MESON
+ help
+ Say Y here if you want kernel low-lever debugging support
+ on Amlogic Meson6 based platforms on the UARTAO.
+
+ config DEBUG_MMP_UART2
+ bool "Kernel low-level debugging message via MMP UART2"
+ depends on ARCH_MMP
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on MMP UART2.
+
+ config DEBUG_MMP_UART3
+ bool "Kernel low-level debugging message via MMP UART3"
+ depends on ARCH_MMP
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on MMP UART3.
+
+ config DEBUG_MVEBU_UART0
+ bool "Kernel low-level debugging messages via MVEBU UART0 (old bootloaders)"
+ depends on ARCH_MVEBU
+ depends on ARCH_MVEBU && CPU_V7
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on MVEBU based platforms on UART0.
+
+ This option should be used with the old bootloaders
+ that left the internal registers mapped at
+ 0xd0000000. As of today, this is the case on
+ platforms such as the Globalscale Mirabox or the
+ Plathome OpenBlocks AX3, when using the original
+ bootloader.
+
+ This option will not work on older Marvell platforms
+ (Kirkwood, Dove, MV78xx0, Orion5x), which should pick
+ the "new bootloader" variant.
+
+ If the wrong DEBUG_MVEBU_UART* option is selected,
+ when u-boot hands over to the kernel, the system
+ silently crashes, with no serial output at all.
+
+ config DEBUG_MVEBU_UART0_ALTERNATE
+ bool "Kernel low-level debugging messages via MVEBU UART0 (new bootloaders)"
+ depends on ARCH_MVEBU || ARCH_DOVE || ARCH_MV78XX0 || ARCH_ORION5X
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on MVEBU based platforms on UART0. (Armada XP, Armada 3xx,
+ Kirkwood, Dove, MV78xx0, Orion5x).
+
+
+ This option should be used with the new bootloaders
+ that remap the internal registers at 0xf1000000.
+
+ If the wrong DEBUG_MVEBU_UART* option is selected,
+ when u-boot hands over to the kernel, the system
+ silently crashes, with no serial output at all.
+
+ config DEBUG_MVEBU_UART1_ALTERNATE
+ bool "Kernel low-level debugging messages via MVEBU UART1 (new bootloaders)"
+ depends on ARCH_MVEBU
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on MVEBU based platforms on UART1. (Armada XP, Armada 3xx,
+ Kirkwood, Dove, MV78xx0, Orion5x).
+
+ This option should be used with the new bootloaders
+ that remap the internal registers at 0xf1000000.
+ All of the older (pre Armada XP/370) platforms also use
+ this address, regardless of the boot loader version.
+
+ If the wrong DEBUG_MVEBU_UART* option is selected,
+ when u-boot hands over to the kernel, the system
+ silently crashes, with no serial output at all.
+
+ config DEBUG_MSTARV7_PMUART
+ bool "Kernel low-level debugging messages via MSTARV7 PM UART"
+ depends on ARCH_MSTARV7
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ for MSTAR ARMv7-based platforms on PM UART.
+
+ config DEBUG_MT6589_UART0
+ bool "Mediatek mt6589 UART0"
+ depends on ARCH_MEDIATEK
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ for Mediatek mt6589 based platforms on UART0.
+
+ config DEBUG_MT8127_UART0
+ bool "Mediatek mt8127/mt6592 UART0"
+ depends on ARCH_MEDIATEK
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ for Mediatek mt8127 based platforms on UART0.
+
+ config DEBUG_MT8135_UART3
+ bool "Mediatek mt8135 UART3"
+ depends on ARCH_MEDIATEK
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ for Mediatek mt8135 based platforms on UART3.
+
+ config DEBUG_NOMADIK_UART
+ bool "Kernel low-level debugging messages via NOMADIK UART"
+ depends on ARCH_NOMADIK
+ select DEBUG_UART_PL01X
+ help
+ Say Y here if you want kernel low-level debugging support
+ on NOMADIK based platforms.
+
+ config DEBUG_NSPIRE_CLASSIC_UART
+ bool "Kernel low-level debugging via TI-NSPIRE 8250 UART"
+ depends on ARCH_NSPIRE
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on TI-NSPIRE classic models.
+
+ config DEBUG_NSPIRE_CX_UART
+ bool "Kernel low-level debugging via TI-NSPIRE PL011 UART"
+ depends on ARCH_NSPIRE
+ select DEBUG_UART_PL01X
+ help
+ Say Y here if you want kernel low-level debugging support
+ on TI-NSPIRE CX models.
+
+ config DEBUG_OMAP1UART1
+ bool "Kernel low-level debugging via OMAP1 UART1"
+ depends on ARCH_OMAP1
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on OMAP1 based platforms (except OMAP730) on the UART1.
+
+ config DEBUG_OMAP1UART2
+ bool "Kernel low-level debugging via OMAP1 UART2"
+ depends on ARCH_OMAP1
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on OMAP1 based platforms (except OMAP730) on the UART2.
+
+ config DEBUG_OMAP1UART3
+ bool "Kernel low-level debugging via OMAP1 UART3"
+ depends on ARCH_OMAP1
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on OMAP1 based platforms (except OMAP730) on the UART3.
+
+ config DEBUG_OMAP2UART1
+ bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)"
+ depends on ARCH_OMAP2PLUS
+ select DEBUG_UART_8250
+ help
+ This covers at least h4, 2430sdp, 3430sdp, 3630sdp,
+ omap3 torpedo and 3530 lv som.
+
+ config DEBUG_OMAP2UART2
+ bool "Kernel low-level debugging messages via OMAP2/3/4 UART2"
+ depends on ARCH_OMAP2PLUS
+ select DEBUG_UART_8250
+
+ config DEBUG_OMAP2UART3
+ bool "Kernel low-level debugging messages via OMAP2 UART3 (n8x0)"
+ depends on ARCH_OMAP2PLUS
+ select DEBUG_UART_8250
+
+ config DEBUG_OMAP3UART3
+ bool "Kernel low-level debugging messages via OMAP3 UART3 (most omap3 boards)"
+ depends on ARCH_OMAP2PLUS
+ select DEBUG_UART_8250
+ help
+ This covers at least cm_t3x, beagle, crane, devkit8000,
+ igep00x0, ldp, n900, n9(50), pandora, overo, touchbook,
+ and 3517evm.
+
+ config DEBUG_OMAP4UART3
+ bool "Kernel low-level debugging messages via OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)"
+ depends on ARCH_OMAP2PLUS
+ select DEBUG_UART_8250
+
+ config DEBUG_OMAP3UART4
+ bool "Kernel low-level debugging messages via OMAP36XX UART4"
+ depends on ARCH_OMAP2PLUS
+ select DEBUG_UART_8250
+
+ config DEBUG_OMAP4UART4
+ bool "Kernel low-level debugging messages via OMAP4/5 UART4"
+ depends on ARCH_OMAP2PLUS
+ select DEBUG_UART_8250
+
+ config DEBUG_TI81XXUART1
+ bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)"
+ depends on ARCH_OMAP2PLUS
+ select DEBUG_UART_8250
+
+ config DEBUG_TI81XXUART2
+ bool "Kernel low-level debugging messages via TI81XX UART2"
+ depends on ARCH_OMAP2PLUS
+ select DEBUG_UART_8250
+
+ config DEBUG_TI81XXUART3
+ bool "Kernel low-level debugging messages via TI81XX UART3 (ti8168evm)"
+ depends on ARCH_OMAP2PLUS
+ select DEBUG_UART_8250
+
+ config DEBUG_AM33XXUART1
+ bool "Kernel low-level debugging messages via AM33XX UART1"
+ depends on ARCH_OMAP2PLUS
+ select DEBUG_UART_8250
+
+ config DEBUG_ZOOM_UART
+ bool "Kernel low-level debugging messages via Zoom2/3 UART"
+ depends on ARCH_OMAP2PLUS
+ select DEBUG_OMAP2PLUS_UART
+
+ config DEBUG_PXA_UART1
+ depends on ARCH_PXA
+ bool "Use PXA UART1 for low-level debug"
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on PXA UART1.
+
+ config DEBUG_QCOM_UARTDM
+ bool "Kernel low-level debugging messages via QCOM UARTDM"
+ depends on ARCH_QCOM
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the serial port on Qualcomm devices.
+
+ ARCH DEBUG_UART_PHYS DEBUG_UART_VIRT
+ APQ8064 0x16640000 0xf0040000
+ APQ8084 0xf995e000 0xfa75e000
+ IPQ4019 0x078af000 0xf78af000
+ MSM8X60 0x19c40000 0xf0040000
+ MSM8960 0x16440000 0xf0040000
+ MSM8974 0xf991e000 0xfa71e000
+
+ Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
+ options based on your needs.
+
+ config DEBUG_REALVIEW_STD_PORT
+ bool "RealView Default UART"
+ depends on ARCH_REALVIEW
+ select DEBUG_UART_PL01X
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the serial port on RealView EB, PB11MP, PBA8
+ and PBX platforms.
+
+ config DEBUG_REALVIEW_PB1176_PORT
+ bool "RealView PB1176 UART"
+ depends on MACH_REALVIEW_PB1176
+ select DEBUG_UART_PL01X
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the standard serial port on the RealView
+ PB1176 platform.
+
+ config DEBUG_RV1108_UART0
+ bool "Kernel low-level debugging messages via Rockchip RV1108 UART0"
+ depends on ARCH_ROCKCHIP
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Rockchip RV1108 based platforms.
+
+ config DEBUG_RV1108_UART1
+ bool "Kernel low-level debugging messages via Rockchip RV1108 UART1"
+ depends on ARCH_ROCKCHIP
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Rockchip RV1108 based platforms.
+
+ config DEBUG_RV1108_UART2
+ bool "Kernel low-level debugging messages via Rockchip RV1108 UART2"
+ depends on ARCH_ROCKCHIP
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Rockchip RV1108 based platforms.
+
+ config DEBUG_RK29_UART0
+ bool "Kernel low-level debugging messages via Rockchip RK29 UART0"
+ depends on ARCH_ROCKCHIP
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Rockchip based platforms.
+
+ config DEBUG_RK29_UART1
+ bool "Kernel low-level debugging messages via Rockchip RK29 UART1"
+ depends on ARCH_ROCKCHIP
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Rockchip based platforms.
+
+ config DEBUG_RK29_UART2
+ bool "Kernel low-level debugging messages via Rockchip RK29 UART2"
+ depends on ARCH_ROCKCHIP
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Rockchip based platforms.
+
+ config DEBUG_RK3X_UART0
+ bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART0"
+ depends on ARCH_ROCKCHIP
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Rockchip based platforms.
+
+ config DEBUG_RK3X_UART1
+ bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART1"
+ depends on ARCH_ROCKCHIP
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Rockchip based platforms.
+
+ config DEBUG_RK3X_UART2
+ bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART2"
+ depends on ARCH_ROCKCHIP
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Rockchip based platforms.
+
+ config DEBUG_RK3X_UART3
+ bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART3"
+ depends on ARCH_ROCKCHIP
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Rockchip based platforms.
+
+ config DEBUG_RK32_UART2
+ bool "Kernel low-level debugging messages via Rockchip RK32 UART2"
+ depends on ARCH_ROCKCHIP
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Rockchip RK32xx based platforms.
+
+ config DEBUG_R7S72100_SCIF2
+ bool "Kernel low-level debugging messages via SCIF2 on R7S72100"
+ depends on ARCH_R7S72100
+ help
+ Say Y here if you want kernel low-level debugging support
+ via SCIF2 on Renesas RZ/A1H (R7S72100).
+
+ config DEBUG_R7S9210_SCIF2
+ bool "Kernel low-level debugging messages via SCIF2 on R7S9210"
+ depends on ARCH_R7S9210
+ help
+ Say Y here if you want kernel low-level debugging support
+ via SCIF2 on Renesas RZ/A2M (R7S9210).
+
+ config DEBUG_R7S9210_SCIF4
+ bool "Kernel low-level debugging messages via SCIF4 on R7S9210"
+ depends on ARCH_R7S9210
+ help
+ Say Y here if you want kernel low-level debugging support
+ via SCIF4 on Renesas RZ/A2M (R7S9210).
+
+ config DEBUG_RCAR_GEN1_SCIF0
+ bool "Kernel low-level debugging messages via SCIF0 on R8A7778"
+ depends on ARCH_R8A7778
+ help
+ Say Y here if you want kernel low-level debugging support
+ via SCIF0 on Renesas R-Car M1A (R8A7778).
+
+ config DEBUG_RCAR_GEN1_SCIF2
+ bool "Kernel low-level debugging messages via SCIF2 on R8A7779"
+ depends on ARCH_R8A7779
+ help
+ Say Y here if you want kernel low-level debugging support
+ via SCIF2 on Renesas R-Car H1 (R8A7779).
+
+ config DEBUG_RCAR_GEN2_SCIF0
+ bool "Kernel low-level debugging messages via SCIF0 on R-Car Gen2 and RZ/G1"
+ depends on ARCH_R8A7743 || ARCH_R8A7744 || ARCH_R8A7790 || \
+ ARCH_R8A7791 || ARCH_R8A7792 || ARCH_R8A7793
+ help
+ Say Y here if you want kernel low-level debugging support
+ via SCIF0 on Renesas RZ/G1M (R8A7743), RZ/G1N (R8A7744),
+ R-Car H2 (R8A7790), M2-W (R8A7791), V2H (R8A7792), or
+ M2-N (R8A7793).
+
+ config DEBUG_RCAR_GEN2_SCIF1
+ bool "Kernel low-level debugging messages via SCIF1 on R8A77470"
+ depends on ARCH_R8A77470
+ help
+ Say Y here if you want kernel low-level debugging support
+ via SCIF1 on Renesas RZ/G1C (R8A77470).
+
+ config DEBUG_RCAR_GEN2_SCIF2
+ bool "Kernel low-level debugging messages via SCIF2 on R8A7794"
+ depends on ARCH_R8A7794
+ help
+ Say Y here if you want kernel low-level debugging support
+ via SCIF2 on Renesas R-Car E2 (R8A7794).
+
+ config DEBUG_RCAR_GEN2_SCIF4
+ bool "Kernel low-level debugging messages via SCIF4 on R8A7745"
+ depends on ARCH_R8A7745
+ help
+ Say Y here if you want kernel low-level debugging support
+ via SCIF4 on Renesas RZ/G1E (R8A7745).
+
+ config DEBUG_RCAR_GEN2_SCIFA2
+ bool "Kernel low-level debugging messages via SCIFA2 on R8A7742"
+ depends on ARCH_R8A7742
+ help
+ Say Y here if you want kernel low-level debugging support
+ via SCIFA2 on Renesas RZ/G1H (R8A7742).
+
+ config DEBUG_RMOBILE_SCIFA0
+ bool "Kernel low-level debugging messages via SCIFA0 on R8A73A4"
+ depends on ARCH_R8A73A4
+ help
+ Say Y here if you want kernel low-level debugging support
+ via SCIFA0 on Renesas R-Mobile APE6 (R8A73A4).
+
+ config DEBUG_RMOBILE_SCIFA1
+ bool "Kernel low-level debugging messages via SCIFA1 on R8A7740"
+ depends on ARCH_R8A7740
+ help
+ Say Y here if you want kernel low-level debugging support
+ via SCIFA1 on Renesas R-Mobile A1 (R8A7740).
+
+ config DEBUG_RMOBILE_SCIFA4
+ bool "Kernel low-level debugging messages via SCIFA4 on SH73A0"
+ depends on ARCH_SH73A0
+ help
+ Say Y here if you want kernel low-level debugging support
+ via SCIFA4 on Renesas SH-Mobile AG5 (SH73A0).
+
+ config DEBUG_S3C_UART0
+ depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
+ select DEBUG_EXYNOS_UART if ARCH_EXYNOS
+ select DEBUG_S3C64XX_UART if ARCH_S3C64XX
+ select DEBUG_S5PV210_UART if ARCH_S5PV210
+ bool "Use Samsung S3C UART 0 for low-level debug"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART 0. The port must have been initialised
+ by the boot-loader before use.
+
+ config DEBUG_S3C_UART1
+ depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
+ select DEBUG_EXYNOS_UART if ARCH_EXYNOS
+ select DEBUG_S3C64XX_UART if ARCH_S3C64XX
+ select DEBUG_S5PV210_UART if ARCH_S5PV210
+ bool "Use Samsung S3C UART 1 for low-level debug"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART 1. The port must have been initialised
+ by the boot-loader before use.
+
+ config DEBUG_S3C_UART2
+ depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
+ select DEBUG_EXYNOS_UART if ARCH_EXYNOS
+ select DEBUG_S3C64XX_UART if ARCH_S3C64XX
+ select DEBUG_S5PV210_UART if ARCH_S5PV210
+ bool "Use Samsung S3C UART 2 for low-level debug"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART 2. The port must have been initialised
+ by the boot-loader before use.
+
+ config DEBUG_S3C_UART3
+ depends on ARCH_EXYNOS || ARCH_S5PV210
+ select DEBUG_EXYNOS_UART if ARCH_EXYNOS
+ select DEBUG_S3C64XX_UART if ARCH_S3C64XX
+ select DEBUG_S5PV210_UART if ARCH_S5PV210
+ bool "Use Samsung S3C UART 3 for low-level debug"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART 3. The port must have been initialised
+ by the boot-loader before use.
+
+ config DEBUG_SA1100
+ depends on ARCH_SA1100
+ bool "Use SA1100 UARTs for low-level debug"
+ help
+ Say Y here if you want kernel low-level debugging support
+ on SA-11x0 UART ports. The kernel will check for the first
+ enabled UART in a sequence 3-1-2.
+
+ config DEBUG_SD5203_UART
+ bool "Hisilicon SD5203 Debug UART"
+ depends on ARCH_SD5203
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on SD5203 UART.
+
+ config DEBUG_SOCFPGA_UART0
+ depends on ARCH_INTEL_SOCFPGA
+ bool "Use SOCFPGA UART0 for low-level debug"
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on SOCFPGA(Cyclone 5 and Arria 5) based platforms.
+
+ config DEBUG_SOCFPGA_ARRIA10_UART1
+ depends on ARCH_INTEL_SOCFPGA
+ bool "Use SOCFPGA Arria10 UART1 for low-level debug"
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on SOCFPGA(Arria 10) based platforms.
+
+ config DEBUG_SOCFPGA_CYCLONE5_UART1
+ depends on ARCH_INTEL_SOCFPGA
+ bool "Use SOCFPGA Cyclone 5 UART1 for low-level debug"
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on SOCFPGA(Cyclone 5 and Arria 5) based platforms.
+
+ config DEBUG_SUN9I_UART0
+ bool "Kernel low-level debugging messages via sun9i UART0"
+ depends on MACH_SUN9I
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Allwinner A80 based platforms on the UART0.
+
+ config DEBUG_SUNXI_UART0
+ bool "Kernel low-level debugging messages via sunXi UART0"
+ depends on ARCH_SUNXI
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Allwinner A1X based platforms on the UART0.
+
+ config DEBUG_SUNXI_UART1
+ bool "Kernel low-level debugging messages via sunXi UART1"
+ depends on ARCH_SUNXI
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Allwinner A1X based platforms on the UART1.
+
+ config DEBUG_SUNXI_R_UART
+ bool "Kernel low-level debugging messages via sunXi R_UART"
+ depends on MACH_SUN6I || MACH_SUN8I
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Allwinner A31/A23 based platforms on the R_UART.
+
+ config DEBUG_SPEAR3XX
+ bool "Kernel low-level debugging messages via ST SPEAr 3xx/6xx UART"
+ depends on ARCH_SPEAR3XX || ARCH_SPEAR6XX
+ select DEBUG_UART_PL01X
+ help
+ Say Y here if you want kernel low-level debugging support
+ on ST SPEAr based platforms.
+
+ config DEBUG_SPEAR13XX
+ bool "Kernel low-level debugging messages via ST SPEAr 13xx UART"
+ depends on ARCH_SPEAR13XX
+ select DEBUG_UART_PL01X
+ help
+ Say Y here if you want kernel low-level debugging support
+ on ST SPEAr13xx based platforms.
+
+ config DEBUG_STIH41X_ASC2
+ bool "Use StiH415/416 ASC2 UART for low-level debug"
+ depends on ARCH_STI
+ help
+ Say Y here if you want kernel low-level debugging support
+ on STiH415/416 based platforms like b2000, which has
+ default UART wired up to ASC2.
+
+ If unsure, say N.
+
+ config DEBUG_STIH41X_SBC_ASC1
+ bool "Use StiH415/416 SBC ASC1 UART for low-level debug"
+ depends on ARCH_STI
+ help
+ Say Y here if you want kernel low-level debugging support
+ on STiH415/416 based platforms like b2020. which has
+ default UART wired up to SBC ASC1.
+
+ If unsure, say N.
+
+ config DEBUG_STIH418_SBC_ASC0
+ bool "Use StiH418 SBC ASC0 UART for low-level debug"
+ depends on ARCH_STI
+ help
+ Say Y here if you want kernel low-level debugging support
+ on STiH418 based platforms which has default UART wired
+ up to SBC ASC0.
+
+ If unsure, say N.
+
+ config STM32F4_DEBUG_UART
+ bool "Use STM32F4 UART for low-level debug"
+ depends on MACH_STM32F429 || MACH_STM32F469
+ select DEBUG_STM32_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on STM32F4 based platforms, which default UART is wired on
+ USART1, but another UART instance can be selected by modifying
+ CONFIG_DEBUG_UART_PHYS.
+
+ If unsure, say N.
+
+ config STM32F7_DEBUG_UART
+ bool "Use STM32F7 UART for low-level debug"
+ depends on MACH_STM32F746 || MACH_STM32F769
+ select DEBUG_STM32_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on STM32F7 based platforms, which default UART is wired on
+ USART1, but another UART instance can be selected by modifying
+ CONFIG_DEBUG_UART_PHYS.
+
+ If unsure, say N.
+
+ config STM32H7_DEBUG_UART
+ bool "Use STM32H7 UART for low-level debug"
+ depends on MACH_STM32H743
+ select DEBUG_STM32_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on STM32H7 based platforms, which default UART is wired on
+ USART1, but another UART instance can be selected by modifying
+ CONFIG_DEBUG_UART_PHYS.
+
+ If unsure, say N.
+
+ config STM32MP1_DEBUG_UART
+ bool "Use STM32MP1 UART for low-level debug"
+ depends on MACH_STM32MP157
+ select DEBUG_STM32_UART
+ help
+ Say Y here if you want kernel low-level debugging support on
+ STM32MP1-based platforms, where the default UART is wired to
+ UART4, but another UART instance can be selected by modifying
+ CONFIG_DEBUG_UART_PHYS and CONFIG_DEBUG_UART_VIRT.
+
+ If unsure, say N.
+
+ config TEGRA_DEBUG_UART_AUTO_ODMDATA
+ bool "Kernel low-level debugging messages via Tegra UART via ODMDATA"
+ depends on ARCH_TEGRA
+ select DEBUG_TEGRA_UART
+ help
+ Automatically determines which UART to use for low-level
+ debug based on the ODMDATA value. This value is part of
+ the BCT, and is written to the boot memory device using
+ nvflash, or other flashing tool. When bits 19:18 are 3,
+ then bits 17:15 indicate which UART to use; 0/1/2/3/4
+ are UART A/B/C/D/E.
+
+ config TEGRA_DEBUG_UARTA
+ bool "Kernel low-level debugging messages via Tegra UART A"
+ depends on ARCH_TEGRA
+ select DEBUG_TEGRA_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Tegra based platforms.
+
+ config TEGRA_DEBUG_UARTB
+ bool "Kernel low-level debugging messages via Tegra UART B"
+ depends on ARCH_TEGRA
+ select DEBUG_TEGRA_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Tegra based platforms.
+
+ config TEGRA_DEBUG_UARTC
+ bool "Kernel low-level debugging messages via Tegra UART C"
+ depends on ARCH_TEGRA
+ select DEBUG_TEGRA_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Tegra based platforms.
+
+ config TEGRA_DEBUG_UARTD
+ bool "Kernel low-level debugging messages via Tegra UART D"
+ depends on ARCH_TEGRA
+ select DEBUG_TEGRA_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Tegra based platforms.
+
+ config TEGRA_DEBUG_UARTE
+ bool "Kernel low-level debugging messages via Tegra UART E"
+ depends on ARCH_TEGRA
+ select DEBUG_TEGRA_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Tegra based platforms.
+
+ config DEBUG_UX500_UART
+ depends on ARCH_U8500
+ bool "Use Ux500 UART for low-level debug"
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Ux500 based platforms.
+
+ config DEBUG_VERSATILE
+ bool "Kernel low-level debugging messages via ARM Versatile UART"
+ depends on ARCH_VERSATILE
+ select DEBUG_UART_PL01X
+ help
+ Say Y here if you want kernel low-level debugging support
+ on ARM Versatile platforms.
+
+ config DEBUG_VEXPRESS_UART0_DETECT
+ bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
+ depends on ARCH_VEXPRESS && CPU_CP15_MMU
+ help
+ This option enables a simple heuristic which tries to determine
+ the motherboard's memory map variant (original or RS1) and then
+ choose the relevant UART0 base address.
+
+ Note that this will only work with standard A-class core tiles,
+ and may fail with non-standard SMM or custom software models.
+
+ config DEBUG_VEXPRESS_UART0_CA9
+ bool "Use PL011 UART0 at 0x10009000 (V2P-CA9 core tile)"
+ depends on ARCH_VEXPRESS
+ select DEBUG_UART_PL01X
+ help
+ This option selects UART0 at 0x10009000. Except for custom models,
+ this applies only to the V2P-CA9 tile.
+
+ config DEBUG_VEXPRESS_UART0_RS1
+ bool "Use PL011 UART0 at 0x1c090000 (RS1 complaint tiles)"
+ depends on ARCH_VEXPRESS
+ select DEBUG_UART_PL01X
+ help
+ This option selects UART0 at 0x1c090000. This applies to most
+ of the tiles using the RS1 memory map, including all new A-class
+ core tiles, FPGA-based SMMs and software models.
+
+ config DEBUG_VEXPRESS_UART0_CRX
+ bool "Use PL011 UART0 at 0xb0090000 (Cortex-R compliant tiles)"
+ depends on ARCH_VEXPRESS && !MMU
+ select DEBUG_UART_PL01X
+ help
+ This option selects UART0 at 0xb0090000. This is appropriate for
+ Cortex-R series tiles and SMMs, such as Cortex-R5 and Cortex-R7
+
+ config DEBUG_VF_UART
+ bool "Vybrid UART"
+ depends on SOC_VF610
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Vybrid based platforms.
+
+ config DEBUG_VT8500_UART0
+ bool "Use UART0 on VIA/Wondermedia SoCs"
+ depends on ARCH_VT8500
+ help
+ This option selects UART0 on VIA/Wondermedia System-on-a-chip
+ devices, including VT8500, WM8505, WM8650 and WM8850.
+
+ config DEBUG_ZYNQ_UART0
+ bool "Kernel low-level debugging on Xilinx Zynq using UART0"
+ depends on ARCH_ZYNQ
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART0 on the Zynq platform.
+
+ config DEBUG_ZYNQ_UART1
+ bool "Kernel low-level debugging on Xilinx Zynq using UART1"
+ depends on ARCH_ZYNQ
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART1 on the Zynq platform.
+
+ If you have a ZC702 board and want early boot messages to
+ appear on the USB serial adaptor, select this option.
+
+ config DEBUG_ICEDCC
+ bool "Kernel low-level debugging via EmbeddedICE DCC channel"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the EmbeddedICE macrocell's DCC channel using
+ co-processor 14. This is known to work on the ARM9 style ICE
+ channel and on the XScale with the PEEDI.
+
+ Note that the system will appear to hang during boot if there
+ is nothing connected to read from the DCC.
+
+ config DEBUG_SEMIHOSTING
+ bool "Kernel low-level debug output via semihosting I/O"
+ help
+ Semihosting enables code running on an ARM target to use
+ the I/O facilities on a host debugger/emulator through a
+ simple SVC call. The host debugger or emulator must have
+ semihosting enabled for the special svc call to be trapped
+ otherwise the kernel will crash.
+
+ This is known to work with OpenOCD, as well as
+ ARM's Fast Models, or any other controlling environment
+ that implements semihosting.
+
+ For more details about semihosting, please see
+ chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd.
+
+ config DEBUG_LL_UART_8250
+ bool "Kernel low-level debugging via 8250 UART"
+ help
+ Say Y here if you wish the debug print routes to direct
+ their output to an 8250 UART. You can use this option
+ to provide the parameters for the 8250 UART rather than
+ selecting one of the platform specific options above if
+ you know the parameters for the port.
+
+ This option is preferred over the platform specific
+ options; the platform specific options are deprecated
+ and will be soon removed.
+
+ config DEBUG_LL_UART_PL01X
+ bool "Kernel low-level debugging via ARM Ltd PL01x Primecell UART"
+ help
+ Say Y here if you wish the debug print routes to direct
+ their output to a PL01x Primecell UART. You can use
+ this option to provide the parameters for the UART
+ rather than selecting one of the platform specific
+ options above if you know the parameters for the port.
+
+ This option is preferred over the platform specific
+ options; the platform specific options are deprecated
+ and will be soon removed.
+
+endchoice
+
+config DEBUG_AT91_UART
+ bool
+ depends on ARCH_AT91
+
+config DEBUG_EXYNOS_UART
+ bool
+
+config DEBUG_S3C64XX_UART
+ bool
+
+config DEBUG_S5PV210_UART
+ bool
+
+config DEBUG_S3C_UART
+ depends on DEBUG_S3C64XX_UART || DEBUG_S5PV210_UART || \
+ DEBUG_EXYNOS_UART
+ int
+ default "0" if DEBUG_S3C_UART0
+ default "1" if DEBUG_S3C_UART1
+ default "2" if DEBUG_S3C_UART2
+ default "3" if DEBUG_S3C_UART3
+
+config DEBUG_OMAP2PLUS_UART
+ bool
+ depends on ARCH_OMAP2PLUS
+
+config DEBUG_IMX_UART_PORT
+ int "i.MX Debug UART Port Selection"
+ depends on DEBUG_IMX1_UART || \
+ DEBUG_IMX25_UART || \
+ DEBUG_IMX27_UART || \
+ DEBUG_IMX31_UART || \
+ DEBUG_IMX35_UART || \
+ DEBUG_IMX50_UART || \
+ DEBUG_IMX51_UART || \
+ DEBUG_IMX53_UART || \
+ DEBUG_IMX6Q_UART || \
+ DEBUG_IMX6SL_UART || \
+ DEBUG_IMX6SX_UART || \
+ DEBUG_IMX6UL_UART || \
+ DEBUG_IMX7D_UART
+ default 1
+ help
+ Choose UART port on which kernel low-level debug messages
+ should be output.
+
+config DEBUG_VF_UART_PORT
+ int "Vybrid Debug UART Port Selection" if DEBUG_VF_UART
+ default 1
+ range 0 3
+ depends on SOC_VF610
+ help
+ Choose UART port on which kernel low-level debug messages
+ should be output.
+
+config DEBUG_TEGRA_UART
+ bool
+ depends on ARCH_TEGRA
+
+config DEBUG_STM32_UART
+ bool
+ depends on ARCH_STM32
+
+config DEBUG_UART_FLOW_CONTROL
+ bool "Enable flow control (CTS) for the debug UART"
+ depends on DEBUG_LL
+ default y if DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC
+ help
+ Some UART ports are connected to terminals that will use modem
+ control signals to indicate whether they are ready to receive text.
+ In practice this means that the terminal is asserting the special
+ control signal CTS (Clear To Send). If your debug UART supports
+ this and your debug terminal will require it, enable this option.
+
+config DEBUG_LL_INCLUDE
+ string
+ default "debug/sa1100.S" if DEBUG_SA1100
+ default "debug/palmchip.S" if DEBUG_UART_8250_PALMCHIP
+ default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250
+ default "debug/at91.S" if DEBUG_AT91_UART
+ default "debug/asm9260.S" if DEBUG_ASM9260_UART
+ default "debug/clps711x.S" if DEBUG_CLPS711X_UART1 || DEBUG_CLPS711X_UART2
+ default "debug/dc21285.S" if DEBUG_DC21285_PORT
+ default "debug/meson.S" if DEBUG_MESON_UARTAO
+ default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X
+ default "debug/exynos.S" if DEBUG_EXYNOS_UART
+ default "debug/icedcc.S" if DEBUG_ICEDCC
+ default "debug/imx.S" if DEBUG_IMX1_UART || \
+ DEBUG_IMX25_UART || \
+ DEBUG_IMX27_UART || \
+ DEBUG_IMX31_UART || \
+ DEBUG_IMX35_UART || \
+ DEBUG_IMX50_UART || \
+ DEBUG_IMX51_UART || \
+ DEBUG_IMX53_UART || \
+ DEBUG_IMX6Q_UART || \
+ DEBUG_IMX6SL_UART || \
+ DEBUG_IMX6SX_UART || \
+ DEBUG_IMX6UL_UART || \
+ DEBUG_IMX7D_UART
+ default "debug/msm.S" if DEBUG_QCOM_UARTDM
+ default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
+ default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2
+ default "debug/renesas-scif.S" if DEBUG_R7S9210_SCIF2
+ default "debug/renesas-scif.S" if DEBUG_R7S9210_SCIF4
+ default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF0
+ default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF2
+ default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF0
+ default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF1
+ default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF2
+ default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF4
+ default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIFA2
+ default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0
+ default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1
+ default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4
+ default "debug/s3c24xx.S" if DEBUG_S3C64XX_UART
+ default "debug/s5pv210.S" if DEBUG_S5PV210_UART
+ default "debug/sti.S" if DEBUG_STIH41X_ASC2
+ default "debug/sti.S" if DEBUG_STIH41X_SBC_ASC1
+ default "debug/sti.S" if DEBUG_STIH418_SBC_ASC0
+ default "debug/stm32.S" if DEBUG_STM32_UART
+ default "debug/tegra.S" if DEBUG_TEGRA_UART
+ default "debug/ux500.S" if DEBUG_UX500_UART
+ default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT
+ default "debug/vf.S" if DEBUG_VF_UART
+ default "debug/vt8500.S" if DEBUG_VT8500_UART0
+ default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
+ default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART
+ default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0
+ default "debug/brcmstb.S" if DEBUG_BRCMSTB_UART
+ default "mach/debug-macro.S"
+
+# Compatibility options for PL01x
+config DEBUG_UART_PL01X
+ bool
+
+# Compatibility options for 8250
+config DEBUG_UART_8250
+ def_bool ARCH_IXP4XX || ARCH_RPC
+
+config DEBUG_UART_PHYS
+ hex "Physical base address of debug UART"
+ default 0x01c28000 if DEBUG_SUNXI_UART0
+ default 0x01c28400 if DEBUG_SUNXI_UART1
+ default 0x01d0c000 if DEBUG_DAVINCI_DA8XX_UART1
+ default 0x01d0d000 if DEBUG_DAVINCI_DA8XX_UART2
+ default 0x01f02800 if DEBUG_SUNXI_R_UART
+ default 0x02530c00 if DEBUG_KEYSTONE_UART0
+ default 0x02531000 if DEBUG_KEYSTONE_UART1
+ default 0x03010fe0 if ARCH_RPC
+ default 0x07000000 if DEBUG_SUN9I_UART0
+ default 0x09530000 if DEBUG_STIH418_SBC_ASC0
+ default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \
+ DEBUG_VEXPRESS_UART0_CA9
+ default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT
+ default 0x10124000 if DEBUG_RK3X_UART0
+ default 0x10126000 if DEBUG_RK3X_UART1
+ default 0x101f1000 if DEBUG_VERSATILE
+ default 0x101fb000 if DEBUG_NOMADIK_UART
+ default 0x10210000 if DEBUG_RV1108_UART2
+ default 0x10220000 if DEBUG_RV1108_UART1
+ default 0x10230000 if DEBUG_RV1108_UART0
+ default 0x11002000 if DEBUG_MT8127_UART0
+ default 0x11006000 if DEBUG_MT6589_UART0
+ default 0x11009000 if DEBUG_MT8135_UART3
+ default 0x16000000 if DEBUG_INTEGRATOR
+ default 0x1600d000 if DEBUG_SD5203_UART
+ default 0x18000300 if DEBUG_BCM_5301X
+ default 0x18000400 if DEBUG_BCM_HR2
+ default 0x18023000 if DEBUG_BCM_IPROC_UART3
+ default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1
+ default 0x1f221000 if DEBUG_MSTARV7_PMUART
+ default 0x20001000 if DEBUG_HIP01_UART
+ default 0x20060000 if DEBUG_RK29_UART0
+ default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
+ default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
+ default 0x20201000 if DEBUG_BCM2835
+ default 0x3e000000 if DEBUG_BCM_KONA_UART
+ default 0x3f201000 if DEBUG_BCM2836
+ default 0x40010000 if STM32MP1_DEBUG_UART
+ default 0x40011000 if STM32F4_DEBUG_UART || STM32F7_DEBUG_UART || \
+ STM32H7_DEBUG_UART
+ default 0x40028000 if DEBUG_AT91_SAMV7_USART1
+ default 0x40081000 if DEBUG_LPC18XX_UART0
+ default 0x40090000 if DEBUG_LPC32XX
+ default 0x40100000 if DEBUG_PXA_UART1
+ default 0x42000000 if DEBUG_GEMINI
+ default 0x44e09000 if DEBUG_AM33XXUART1
+ default 0x48020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1
+ default 0x48022000 if DEBUG_TI81XXUART2
+ default 0x48024000 if DEBUG_TI81XXUART3
+ default 0x4806a000 if DEBUG_OMAP2UART1 || DEBUG_OMAP3UART1 || \
+ DEBUG_OMAP4UART1 || DEBUG_OMAP5UART1
+ default 0x4806c000 if DEBUG_OMAP2UART2 || DEBUG_OMAP3UART2 || \
+ DEBUG_OMAP4UART2 || DEBUG_OMAP5UART2
+ default 0x4806e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4
+ default 0x49020000 if DEBUG_OMAP3UART3
+ default 0x49042000 if DEBUG_OMAP3UART4
+ default 0x7c0003f8 if DEBUG_FOOTBRIDGE_COM1
+ default 0x7f005000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
+ default 0x7f005400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
+ default 0x7f005800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2
+ default 0x7f005c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3
+ default 0x80010000 if DEBUG_ASM9260_UART
+ default 0x80070000 if DEBUG_IMX23_UART
+ default 0x80074000 if DEBUG_IMX28_UART
+ default 0x808c0000 if DEBUG_EP93XX || ARCH_EP93XX
+ default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
+ default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX
+ default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
+ default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
+ default 0xd0000000 if DEBUG_SPEAR3XX
+ default 0xd0012000 if DEBUG_MVEBU_UART0
+ default 0xc81004c0 if DEBUG_MESON_UARTAO
+ default 0xd4017000 if DEBUG_MMP_UART2
+ default 0xd4018000 if DEBUG_MMP_UART3
+ default 0xe0000000 if DEBUG_SPEAR13XX
+ default 0xe0064200 if DEBUG_AT91_LAN966_FLEXCOM
+ default 0xe1824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3
+ default 0xe4007000 if DEBUG_HIP04_UART
+ default 0xe6c40000 if DEBUG_RMOBILE_SCIFA0
+ default 0xe6c50000 if DEBUG_RMOBILE_SCIFA1
+ default 0xe6c60000 if DEBUG_RCAR_GEN2_SCIFA2
+ default 0xe6c80000 if DEBUG_RMOBILE_SCIFA4
+ default 0xe6e58000 if DEBUG_RCAR_GEN2_SCIF2
+ default 0xe6e60000 if DEBUG_RCAR_GEN2_SCIF0
+ default 0xe6e68000 if DEBUG_RCAR_GEN2_SCIF1
+ default 0xe6ee0000 if DEBUG_RCAR_GEN2_SCIF4
+ default 0xe8008000 if DEBUG_R7S72100_SCIF2 || DEBUG_R7S9210_SCIF2
+ default 0xe8009000 if DEBUG_R7S9210_SCIF4
+ default 0xf0000000 if DEBUG_DIGICOLOR_UA0
+ default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
+ default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE
+ default 0xf7fc9000 if DEBUG_BERLIN_UART
+ default 0xf8020000 if DEBUG_AT91_SAMA5D2_UART1
+ default 0xf8b00000 if DEBUG_HIX5HD2_UART
+ default 0xf991e000 if DEBUG_QCOM_UARTDM
+ default 0xfc00c000 if DEBUG_AT91_SAMA5D4_USART3
+ default 0xfcb00000 if DEBUG_HI3620_UART
+ default 0xfd883000 if DEBUG_ALPINE_UART0
+ default 0xfe531000 if DEBUG_STIH41X_SBC_ASC1
+ default 0xfed32000 if DEBUG_STIH41X_ASC2
+ default 0xff690000 if DEBUG_RK32_UART2
+ default 0xffc02000 if DEBUG_SOCFPGA_UART0
+ default 0xffc02100 if DEBUG_SOCFPGA_ARRIA10_UART1
+ default 0xffc03000 if DEBUG_SOCFPGA_CYCLONE5_UART1
+ default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0
+ default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2
+ default 0xfff36000 if DEBUG_HIGHBANK_UART
+ default 0xfffb0000 if DEBUG_OMAP1UART1
+ default 0xfffb0800 if DEBUG_OMAP1UART2
+ default 0xfffb9800 if DEBUG_OMAP1UART3
+ default 0xfffe8600 if DEBUG_BCM63XX_UART
+ default 0xffffee00 if DEBUG_AT91_SAM9263_DBGU
+ default 0xfffff200 if DEBUG_AT91_RM9200_DBGU
+ depends on ARCH_EP93XX || \
+ DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
+ DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
+ DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \
+ DEBUG_R7S9210_SCIF2 || DEBUG_R7S9210_SCIF4 || \
+ DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \
+ DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF1 || \
+ DEBUG_RCAR_GEN2_SCIF2 || DEBUG_RCAR_GEN2_SCIF4 || \
+ DEBUG_RCAR_GEN2_SCIFA2 || \
+ DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
+ DEBUG_RMOBILE_SCIFA4 || \
+ DEBUG_S3C64XX_UART || \
+ DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
+ DEBUG_DIGICOLOR_UA0 || \
+ DEBUG_AT91_UART || DEBUG_STM32_UART || \
+ DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \
+ DEBUG_STIH418_SBC_ASC0
+
+config DEBUG_UART_VIRT
+ hex "Virtual base address of debug UART"
+ default 0xc881f000 if DEBUG_RV1108_UART2
+ default 0xc8821000 if DEBUG_RV1108_UART1
+ default 0xc8912000 if DEBUG_RV1108_UART0
+ default 0xe0010fe0 if ARCH_RPC
+ default 0xe0824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3
+ default 0xf0010000 if DEBUG_ASM9260_UART
+ default 0xf0100000 if DEBUG_DIGICOLOR_UA0
+ default 0xf01fb000 if DEBUG_NOMADIK_UART
+ default 0xf0201000 if DEBUG_BCM2835 || DEBUG_BCM2836
+ default 0xf0221000 if DEBUG_MSTARV7_PMUART
+ default 0xf1000300 if DEBUG_BCM_5301X
+ default 0xf1000400 if DEBUG_BCM_HR2
+ default 0xf1002000 if DEBUG_MT8127_UART0
+ default 0xf1006000 if DEBUG_MT6589_UART0
+ default 0xf1009000 if DEBUG_MT8135_UART3
+ default 0xf1023000 if DEBUG_BCM_IPROC_UART3
+ default 0xf11f1000 if DEBUG_VERSATILE
+ default 0xf1600000 if DEBUG_INTEGRATOR
+ default 0xf1c28000 if DEBUG_SUNXI_UART0
+ default 0xf1c28400 if DEBUG_SUNXI_UART1
+ default 0xf1f02800 if DEBUG_SUNXI_R_UART
+ default 0xf31004c0 if DEBUG_MESON_UARTAO
+ default 0xf4090000 if DEBUG_LPC32XX
+ default 0xf4200000 if DEBUG_GEMINI
+ default 0xf6200000 if DEBUG_PXA_UART1
+ default 0xf7000000 if DEBUG_SUN9I_UART0
+ default 0xf7000000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
+ default 0xf7000400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
+ default 0xf7000800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2
+ default 0xf7000c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3
+ default 0xf7020000 if DEBUG_AT91_SAMA5D2_UART1
+ default 0xf7fc9000 if DEBUG_BERLIN_UART
+ default 0xf8007000 if DEBUG_HIP04_UART
+ default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9
+ default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
+ default 0xf8ffee00 if DEBUG_AT91_SAM9263_DBGU
+ default 0xf8fff200 if DEBUG_AT91_RM9200_DBGU
+ default 0xf9530000 if DEBUG_STIH418_SBC_ASC0
+ default 0xf9e09000 if DEBUG_AM33XXUART1
+ default 0xfa020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1
+ default 0xfa022000 if DEBUG_TI81XXUART2
+ default 0xfa024000 if DEBUG_TI81XXUART3
+ default 0xfa06a000 if DEBUG_OMAP2UART1 || DEBUG_OMAP3UART1 || \
+ DEBUG_OMAP4UART1 || DEBUG_OMAP5UART1
+ default 0xfa06c000 if DEBUG_OMAP2UART2 || DEBUG_OMAP3UART2 || \
+ DEBUG_OMAP4UART2 || DEBUG_OMAP5UART2
+ default 0xfa06e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4
+ default 0xfa71e000 if DEBUG_QCOM_UARTDM
+ default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
+ default 0xfb00c000 if DEBUG_AT91_SAMA5D4_USART3
+ default 0xfb020000 if DEBUG_OMAP3UART3
+ default 0xfb042000 if DEBUG_OMAP3UART4
+ default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
+ default 0xfcfe8600 if DEBUG_BCM63XX_UART
+ default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX
+ default 0xfd064200 if DEBUG_AT91_LAN966_FLEXCOM
+ default 0xfd531000 if DEBUG_STIH41X_SBC_ASC1
+ default 0xfd883000 if DEBUG_ALPINE_UART0
+ default 0xfdd32000 if DEBUG_STIH41X_ASC2
+ default 0xfe010000 if STM32MP1_DEBUG_UART
+ default 0xfe017000 if DEBUG_MMP_UART2
+ default 0xfe018000 if DEBUG_MMP_UART3
+ default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART
+ default 0xfe300000 if DEBUG_BCM_KONA_UART
+ default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HIX5HD2_UART
+ default 0xfeb24000 if DEBUG_RK3X_UART0
+ default 0xfeb26000 if DEBUG_RK3X_UART1
+ default 0xfeb30c00 if DEBUG_KEYSTONE_UART0
+ default 0xfeb31000 if DEBUG_KEYSTONE_UART1
+ default 0xfec02000 if DEBUG_SOCFPGA_UART0
+ default 0xfec02100 if DEBUG_SOCFPGA_ARRIA10_UART1
+ default 0xfec03000 if DEBUG_SOCFPGA_CYCLONE5_UART1
+ default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE
+ default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE
+ default 0xfec90000 if DEBUG_RK32_UART2
+ default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1
+ default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_SD5203_UART
+ default 0xfed60000 if DEBUG_RK29_UART0
+ default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
+ default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
+ default 0xfedc0000 if DEBUG_EP93XX
+ default 0xfee003f8 if DEBUG_FOOTBRIDGE_COM1
+ default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
+ default 0xfec00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
+ default 0xfec00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
+ default 0xfef36000 if DEBUG_HIGHBANK_UART
+ default 0xff0b0000 if DEBUG_OMAP1UART1
+ default 0xff0b0800 if DEBUG_OMAP1UART2
+ default 0xff0b9800 if DEBUG_OMAP1UART3
+ default 0xffd01000 if DEBUG_HIP01_UART
+ default DEBUG_UART_PHYS if !MMU
+ depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
+ DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
+ DEBUG_QCOM_UARTDM || \
+ DEBUG_S3C64XX_UART || \
+ DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
+ DEBUG_DIGICOLOR_UA0 || \
+ DEBUG_AT91_UART || DEBUG_STM32_UART || \
+ DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \
+ DEBUG_STIH418_SBC_ASC0
+
+config DEBUG_UART_8250_SHIFT
+ int "Register offset shift for the 8250 debug UART"
+ depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
+ default 0 if DEBUG_FOOTBRIDGE_COM1 || DEBUG_BCM_5301X || \
+ DEBUG_BCM_HR2
+ default 3 if DEBUG_MSTARV7_PMUART
+ default 2
+
+config DEBUG_UART_8250_WORD
+ bool "Use 32-bit accesses for 8250 UART"
+ depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
+ depends on DEBUG_UART_8250_SHIFT >= 2
+ default y if DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_ARRIA10_UART1 || \
+ DEBUG_SOCFPGA_CYCLONE5_UART1 || DEBUG_KEYSTONE_UART0 || \
+ DEBUG_KEYSTONE_UART1 || DEBUG_ALPINE_UART0 || \
+ DEBUG_DAVINCI_DA8XX_UART1 || DEBUG_DAVINCI_DA8XX_UART2 || \
+ DEBUG_BCM_IPROC_UART3 || DEBUG_BCM_KONA_UART || \
+ DEBUG_RK32_UART2
+
+config DEBUG_UART_8250_PALMCHIP
+ bool "8250 UART is Palmchip BK-310x"
+ depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
+ help
+ Palmchip provides a UART implementation compatible with 16550
+ except for having a different register layout. Say Y here if
+ the debug UART is of this type.
+
+config DEBUG_UNCOMPRESS
+ bool "Enable decompressor debugging via DEBUG_LL output"
+ depends on !ARCH_MULTIPLATFORM
+ depends on !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
+ depends on DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
+ (!DEBUG_TEGRA_UART || !ZBOOT_ROM) && \
+ !DEBUG_BRCMSTB_UART && !DEBUG_SEMIHOSTING
+ help
+ This option influences the normal decompressor output for
+ multiplatform kernels. Normally, multiplatform kernels disable
+ decompressor output because it is not possible to know where to
+ send the decompressor output.
+
+ When this option is set, the selected DEBUG_LL output method
+ will be re-used for normal decompressor output on multiplatform
+ kernels.
+
+
+config UNCOMPRESS_INCLUDE
+ string
+ default "mach/uncompress.h" if ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100
+ default "debug/uncompress.h"
+
+config EARLY_PRINTK
+ bool "Early printk"
+ depends on DEBUG_LL
+ help
+ Say Y here if you want to have an early console using the
+ kernel low-level debugging functions. Add earlyprintk to your
+ kernel parameters to enable this console.
+
+config ARM_KPROBES_TEST
+ tristate "Kprobes test module"
+ depends on KPROBES && MODULES
+ help
+ Perform tests of kprobes API and instruction set simulation.
+
+config PID_IN_CONTEXTIDR
+ bool "Write the current PID to the CONTEXTIDR register"
+ depends on CPU_COPY_V6
+ help
+ Enabling this option causes the kernel to write the current PID to
+ the PROCID field of the CONTEXTIDR register, at the expense of some
+ additional instructions during context switch. Say Y here only if you
+ are planning to use hardware trace tools with this kernel.
+
+source "drivers/hwtracing/coresight/Kconfig"