diff options
Diffstat (limited to 'arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts')
-rw-r--r-- | arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts | 329 |
1 files changed, 329 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts new file mode 100644 index 0000000000..c0847636f2 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts @@ -0,0 +1,329 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2018 Inventec Corporation +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "Lanyang BMC"; + compatible = "inventec,lanyang-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlycon"; + }; + + memory@80000000 { + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + flash_memory: region@98000000 { + no-map; + reg = <0x98000000 0x04000000>; /* 64M */ + }; + }; + + leds { + compatible = "gpio-leds"; + + sys_boot_status { + label = "System_boot_status"; + gpios = <&gpio ASPEED_GPIO(B, 6) GPIO_ACTIVE_LOW>; + }; + + attention { + label = "Attention_locator"; + gpios = <&gpio ASPEED_GPIO(B, 7) GPIO_ACTIVE_HIGH>; + }; + + plt_fault { + label = "Platform_fault"; + gpios = <&gpio ASPEED_GPIO(B, 1) GPIO_ACTIVE_HIGH>; + }; + + hdd_fault { + label = "Onboard_drive_fault"; + gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_HIGH>; + }; + bmc_err { + lable = "BMC_fault"; + gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>; + }; + + sys_err { + lable = "Sys_fault"; + gpios = <&gpio ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>; + }; + }; + + fsi: gpio-fsi { + compatible = "fsi-master-gpio", "fsi-master"; + #address-cells = <2>; + #size-cells = <0>; + + clock-gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>; + trans-gpios = <&gpio ASPEED_GPIO(D, 5) GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>; + mux-gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>, + <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>, + <&adc 13>, <&adc 14>, <&adc 15>; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 12>; + }; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default + &pinctrl_pwm2_default &pinctrl_pwm3_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + fan@1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x01>; + }; + + fan@2 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x02>; + }; + + fan@3 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x03>; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + label = "pnor"; + m25p,fast-read; + }; +}; + +&spi2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2ck_default + &pinctrl_spi2cs0_default + &pinctrl_spi2cs1_default + &pinctrl_spi2miso_default + &pinctrl_spi2mosi_default>; + + flash@0 { + status = "okay"; + }; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default>; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&lpc_snoop { + status = "okay"; + snoop-ports = <0x80>; +}; + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, + <&syscon ASPEED_CLK_MAC1RCLK>; + clock-names = "MACCLK", "RCLK"; + use-ncsi; +}; + +&mac1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&i2c0 { + status = "okay"; + + eeprom@55 { + compatible = "atmel,24c64"; + reg = <0x55>; + pagesize = <32>; + }; + + rtc@68 { + compatible = "nxp,pcf8523"; + reg = <0x68>; + }; + + tmp75@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; +}; + +&vuart { + status = "okay"; +}; + +&gfx { + status = "okay"; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&gpio { + pin_gpio_b0 { + gpio-hog; + gpios = <ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_HDD1_PWR_EN"; + }; + + pin_gpio_b5 { + gpio-hog; + gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>; + input; + line-name = "BMC_USB1_OCI2"; + }; + + pin_gpio_h5 { + gpio-hog; + gpios = <ASPEED_GPIO(H, 5) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_CP0_PERST_ENABLE_R"; + }; + + pin_gpio_z2 { + gpio-hog; + gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "RST_PCA9546_U177_N"; + }; + + pin_gpio_aa6 { + gpio-hog; + gpios = <ASPEED_GPIO(AA, 6) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_CP0_RESET_N"; + }; + + pin_gpio_aa7 { + gpio-hog; + gpios = <ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_TPM_RESET_N"; + }; + + pin_gpio_ab0 { + gpio-hog; + gpios = <ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>; + output-high; + line-name = "BMC_USB_PWRON_N"; + }; +}; + +&ibt { + status = "okay"; +}; + +&adc { + status = "okay"; +}; + +#include "ibm-power9-dual.dtsi" |