diff options
Diffstat (limited to 'arch/arm/boot/dts/broadcom/bcm53016-dlink-dwl-8610ap.dts')
-rw-r--r-- | arch/arm/boot/dts/broadcom/bcm53016-dlink-dwl-8610ap.dts | 131 |
1 files changed, 131 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/broadcom/bcm53016-dlink-dwl-8610ap.dts b/arch/arm/boot/dts/broadcom/bcm53016-dlink-dwl-8610ap.dts new file mode 100644 index 0000000000..c1f5439174 --- /dev/null +++ b/arch/arm/boot/dts/broadcom/bcm53016-dlink-dwl-8610ap.dts @@ -0,0 +1,131 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "bcm4709.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" +#include <dt-bindings/leds/common.h> +#include <dt-bindings/input/input.h> + +/ { + model = "D-Link DWL-8610AP"; + compatible = "dlink,dwl-8610ap", "brcm,bcm53016", "brcm,bcm4708"; + + memory@0 { + device_type = "memory"; + /* 512 MB RAM in 2 x Macronix D9PSH chips */ + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + led-power { + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_GREEN>; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + led-diag { + /* Actually "diag" unclear what this means */ + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_RED>; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led-wlan-2g { + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_GREEN>; + gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; + }; + + led-wlan-5g { + function = LED_FUNCTION_WLAN; + color = <LED_COLOR_ID_GREEN>; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + button-reset { + debounce-interval = <100>; + wakeup-source; + linux,code = <KEY_RESTART>; + label = "reset"; + /* This GPIO is actually stored in NVRAM, but it's not gonna change */ + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + }; + }; + + /* + * Flash memory at 0x1e000000-0x1fffffff + * Macronix 32 64KB blocks; total size 2MB, same that can be + * found attached to the spi_nor SPI controller. + */ + nvram@1e080000 { + compatible = "brcm,nvram"; + reg = <0x1e080000 0x00020000>; + + et0macaddr: et0macaddr { + }; + + et1macaddr: et1macaddr { + }; + }; +}; + +&gmac0 { + nvmem-cells = <&et0macaddr>; + nvmem-cell-names = "mac-address"; +}; + +&gmac1 { + nvmem-cells = <&et1macaddr>; + nvmem-cell-names = "mac-address"; +}; + +&spi_nor { + /* Serial SPI NOR Flash MX 25L1606E */ + status = "okay"; +}; + +&nandcs { + /* + * Spansion S34ML01G100TFI00 128 MB NAND Flash memory + * + * This ECC is a bit unorthodox but it is what the stock firmware + * is using, so to be able to mount the original partitions + * this is necessary. + */ + nand-ecc-strength = <5>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + /* This is named nflash1.trx in CFE */ + trx@0 { + label = "firmware"; + reg = <0x00000000 0x02800000>; + compatible = "brcm,trx"; + }; + + /* This is named nflash1.trx2 in CFE */ + trx2@2800000 { + label = "firmware2"; + reg = <0x02800000 0x02800000>; + compatible = "brcm,trx"; + }; + + /* This is named nflash1.rwfs in CFE */ + free@5000000 { + label = "free"; + reg = <0x05000000 0x03000000>; + }; + }; +}; |