diff options
Diffstat (limited to 'arch/arm/boot/dts/gemini/gemini-dlink-dns-313.dts')
-rw-r--r-- | arch/arm/boot/dts/gemini/gemini-dlink-dns-313.dts | 323 |
1 files changed, 323 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/gemini/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini/gemini-dlink-dns-313.dts new file mode 100644 index 0000000000..138c47e1ac --- /dev/null +++ b/arch/arm/boot/dts/gemini/gemini-dlink-dns-313.dts @@ -0,0 +1,323 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree file for D-Link DNS-313 1-Bay Network Storage Enclosure + */ + +/dts-v1/; + +#include "gemini.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + model = "D-Link DNS-313 1-Bay Network Storage Enclosure"; + compatible = "dlink,dns-313", "cortina,gemini"; + #address-cells = <1>; + #size-cells = <1>; + + memory@0 { + /* 64 MB SDRAM in a Nanya NT5DS32M16BS-6K package */ + device_type = "memory"; + reg = <0x00000000 0x4000000>; + }; + + aliases { + mdio-gpio0 = &mdio0; + }; + + chosen { + bootargs = "console=ttyS0,19200n8 root=/dev/sda4 rw rootwait"; + stdout-path = "uart0:19200n8"; + }; + + gpio_keys { + compatible = "gpio-keys"; + + button-esc { + debounce-interval = <100>; + wakeup-source; + linux,code = <KEY_ESC>; + label = "reset"; + gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + led-power { + label = "dns313:blue:power"; + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + led-disk-blue { + label = "dns313:blue:disk"; + gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + led-disk-green { + label = "dns313:green:disk"; + gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "disk-read"; + }; + led-disk-red { + label = "dns313:red:disk"; + gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "disk-write"; + }; + }; + + /* + * This is a ADDA AD0405GB-G73 fan @3000 and 6000 RPM. + */ + fan0: gpio-fan { + compatible = "gpio-fan"; + gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>, + <&gpio0 12 GPIO_ACTIVE_HIGH>; + gpio-fan,speed-map = <0 0>, <3000 1>, <6000 2>; + #cooling-cells = <2>; + }; + + /* + * This is the type B USB connector on the device, + * a GPIO-controlled USB VBUS detect + */ + usb1_phy: phy { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + #phy-cells = <0>; + vbus-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; + }; + + /* Global Mixed-Mode Technology G751 mounted on GPIO I2C */ + i2c { + compatible = "i2c-gpio"; + sda-gpios = <&gpio0 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio0 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + #address-cells = <1>; + #size-cells = <0>; + + g751: temperature-sensor@48 { + compatible = "gmt,g751"; + reg = <0x48>; + #thermal-sensor-cells = <0>; + }; + }; + + thermal-zones { + chassis-thermal { + /* Poll every 20 seconds */ + polling-delay = <20000>; + /* Poll every 2nd second when cooling */ + polling-delay-passive = <2000>; + + thermal-sensors = <&g751>; + + /* Tripping points from the fan.script in the rootfs */ + trips { + chassis_alert0: chassis-alert0 { + /* At 43 degrees turn on low speed */ + temperature = <43000>; + hysteresis = <3000>; + type = "active"; + }; + chassis_alert1: chassis-alert1 { + /* At 47 degrees turn on high speed */ + temperature = <47000>; + hysteresis = <3000>; + type = "active"; + }; + chassis_crit: chassis-crit { + /* Just shut down at 60 degrees */ + temperature = <60000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&chassis_alert0>; + cooling-device = <&fan0 1 1>; + }; + map1 { + trip = <&chassis_alert1>; + cooling-device = <&fan0 2 2>; + }; + }; + }; + }; + + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + /* Uses MDC and MDIO */ + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ + <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ + #address-cells = <1>; + #size-cells = <0>; + + /* This is a Realtek RTL8211B Gigabit ethernet transceiver */ + phy0: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + + soc { + flash@30000000 { + /* + * This is a Eon EN29LV400AB 512 KiB flash with + * three partitions. + */ + compatible = "cortina,gemini-flash", "jedec-flash"; + status = "okay"; + reg = <0x30000000 0x00080000>; + #address-cells = <1>; + #size-cells = <1>; + + /* + * This "RedBoot" is the Storlink derivative. + */ + partition@0 { + label = "RedBoot"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "MTD1"; + reg = <0x00040000 0x00020000>; + read-only; + }; + partition@60000 { + label = "MTD2"; + reg = <0x00060000 0x00020000>; + read-only; + }; + }; + + syscon: syscon@40000000 { + pinctrl { + /* + */ + gpio0_default_pins: pinctrl-gpio0 { + mux { + function = "gpio0"; + groups = + /* Used by LEDs conflicts ICE */ + "gpio0bgrp", + /* Used by ? conflicts ICE */ + "gpio0cgrp", + /* + * Used by fan & G751, conflicts LPC, + * UART modem lines, SSP + */ + "gpio0egrp", + /* Used by G751 */ + "gpio0fgrp", + /* Used by MDIO */ + "gpio0igrp"; + }; + }; + gpio1_default_pins: pinctrl-gpio1 { + mux { + function = "gpio1"; + /* Used by "reset" button */ + groups = "gpio1dgrp"; + }; + }; + pinctrl-gmii { + mux { + function = "gmii"; + groups = "gmii_gmac0_grp"; + }; + /* + * In the vendor Linux tree, these values are set for the C3 + * version of the SL3512 ASIC with the comment "benson suggest" + */ + conf0 { + pins = "R8 GMAC0 RXDV", "U11 GMAC1 RXDV"; + skew-delay = <0>; + }; + conf1 { + pins = "T8 GMAC0 RXC"; + skew-delay = <10>; + }; + conf2 { + pins = "T11 GMAC1 RXC"; + skew-delay = <15>; + }; + conf3 { + pins = "P8 GMAC0 TXEN", "V11 GMAC1 TXEN"; + skew-delay = <7>; + }; + conf4 { + pins = "V7 GMAC0 TXC", "P10 GMAC1 TXC"; + skew-delay = <10>; + }; + conf5 { + /* The data lines all have default skew */ + pins = "U8 GMAC0 RXD0", "V8 GMAC0 RXD1", + "P9 GMAC0 RXD2", "R9 GMAC0 RXD3", + "R11 GMAC1 RXD0", "P11 GMAC1 RXD1", + "V12 GMAC1 RXD2", "U12 GMAC1 RXD3", + "R10 GMAC1 TXD0", "T10 GMAC1 TXD1", + "U10 GMAC1 TXD2", "V10 GMAC1 TXD3"; + skew-delay = <7>; + }; + conf6 { + pins = "U7 GMAC0 TXD0", "T7 GMAC0 TXD1", + "R7 GMAC0 TXD2", "P7 GMAC0 TXD3"; + skew-delay = <5>; + }; + /* Set up drive strength on GMAC0 to 16 mA */ + conf7 { + groups = "gmii_gmac0_grp"; + drive-strength = <16>; + }; + }; + }; + }; + + sata: sata@46000000 { + /* The ROM uses this muxmode */ + cortina,gemini-ata-muxmode = <0>; + cortina,gemini-enable-sata-bridge; + status = "okay"; + }; + + gpio0: gpio@4d000000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio0_default_pins>; + }; + + gpio1: gpio@4e000000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpio1_default_pins>; + }; + + ethernet@60000000 { + status = "okay"; + + ethernet-port@0 { + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + ethernet-port@1 { + /* Not used in this platform */ + }; + }; + + ide@63000000 { + status = "okay"; + }; + + usb@69000000 { + status = "okay"; + dr_mode = "peripheral"; + usb-phy = <&usb1_phy>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_default_pins>; + }; + }; +}; |