diff options
Diffstat (limited to 'arch/arm/boot/dts/intel/ixp/intel-ixp45x-ixp46x.dtsi')
-rw-r--r-- | arch/arm/boot/dts/intel/ixp/intel-ixp45x-ixp46x.dtsi | 86 |
1 files changed, 86 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp45x-ixp46x.dtsi b/arch/arm/boot/dts/intel/ixp/intel-ixp45x-ixp46x.dtsi new file mode 100644 index 0000000000..1dd4a65cb7 --- /dev/null +++ b/arch/arm/boot/dts/intel/ixp/intel-ixp45x-ixp46x.dtsi @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: ISC +/* + * Device Tree file for Intel XScale Network Processors + * in the IXP45x and IXP46x series. This series has 64 interrupts and adds a + * few more peripherals over the 42x and 43x series so this extends the + * basic IXP4xx DTSI. + */ +#include "intel-ixp4xx.dtsi" + +/ { + soc { + bus@c4000000 { + compatible = "intel,ixp46x-expansion-bus-controller", "syscon"; + /* Uses at least up to 0x124 */ + reg = <0xc4000000 0x1000>; + }; + + rng@70002100 { + compatible = "intel,ixp46x-rng"; + reg = <0x70002100 4>; + }; + + interrupt-controller@c8003000 { + compatible = "intel,ixp43x-interrupt"; + }; + + /* + * This is the USB Device Mode (UDC) controller, which is used + * to present the IXP4xx as a device on a USB bus. + */ + usb@c800b000 { + compatible = "intel,ixp4xx-udc"; + reg = <0xc800b000 0x1000>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c@c8011000 { + compatible = "intel,ixp4xx-i2c"; + reg = <0xc8011000 0x18>; + interrupts = <33 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + /* This is known as EthB1 */ + ethernet@c800d000 { + compatible = "intel,ixp4xx-ethernet"; + reg = <0xc800d000 0x1000>; + status = "disabled"; + intel,npe = <1>; + /* Dummy values that depend on firmware */ + queue-rx = <&qmgr 0>; + queue-txready = <&qmgr 0>; + }; + + /* This is known as EthB2 */ + ethernet@c800e000 { + compatible = "intel,ixp4xx-ethernet"; + reg = <0xc800e000 0x1000>; + status = "disabled"; + intel,npe = <2>; + /* Dummy values that depend on firmware */ + queue-rx = <&qmgr 0>; + queue-txready = <&qmgr 0>; + }; + + /* This is known as EthB3 */ + ethernet@c800f000 { + compatible = "intel,ixp4xx-ethernet"; + reg = <0xc800f000 0x1000>; + status = "disabled"; + intel,npe = <3>; + /* Dummy values that depend on firmware */ + queue-rx = <&qmgr 0>; + queue-txready = <&qmgr 0>; + }; + + ptp-timer@c8010000 { + compatible = "intel,ixp46x-ptp-timer"; + reg = <0xc8010000 0x1000>; + interrupt-parent = <&gpio0>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>, <7 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "master", "slave"; + }; + }; +}; |