diff options
Diffstat (limited to 'arch/arm/boot/dts/marvell/dove-cubox.dts')
-rw-r--r-- | arch/arm/boot/dts/marvell/dove-cubox.dts | 143 |
1 files changed, 143 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/marvell/dove-cubox.dts b/arch/arm/boot/dts/marvell/dove-cubox.dts new file mode 100644 index 0000000000..bfde99486a --- /dev/null +++ b/arch/arm/boot/dts/marvell/dove-cubox.dts @@ -0,0 +1,143 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "dove.dtsi" + +/ { + model = "SolidRun CuBox"; + compatible = "solidrun,cubox", "marvell,dove"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_gpio_18>; + pinctrl-names = "default"; + + led-power { + label = "Power"; + gpios = <&gpio0 18 1>; + default-state = "keep"; + }; + }; + + usb_power: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 1 0>; + pinctrl-0 = <&pmx_gpio_1>; + pinctrl-names = "default"; + }; + + clocks { + /* 25MHz reference crystal */ + ref25: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + }; + + ir_recv: ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio0 19 1>; + pinctrl-0 = <&pmx_gpio_19>; + pinctrl-names = "default"; + }; + + gpu-subsystem { + status = "okay"; + }; +}; + +&uart0 { status = "okay"; }; +&sata0 { status = "okay"; }; +&mdio { status = "okay"; }; +ð { + status = "okay"; + ethernet-port@0 { + phy-handle = <ðphy>; + }; +}; + +&mdio { + ethphy: ethernet-phy@1 { + compatible = "marvell,88e1310"; + reg = <1>; + }; +}; + +&gpu { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <100000>; + + si5351: clock-generator@60 { + compatible = "silabs,si5351a-msop"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + + /* connect xtal input to 25MHz reference */ + clocks = <&ref25>; + clock-names = "xtal"; + + /* connect xtal input as source of pll0 and pll1 */ + silabs,pll-source = <0 0>, <1 0>; + + clkout0 { + reg = <0>; + silabs,drive-strength = <8>; + silabs,multisynth-source = <0>; + silabs,clock-source = <0>; + silabs,pll-master; + }; + + clkout2 { + reg = <2>; + silabs,drive-strength = <8>; + silabs,multisynth-source = <1>; + silabs,clock-source = <0>; + silabs,pll-master; + }; + }; +}; + +&sdio0 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + /* spi0.0: 4M Flash Winbond W25Q32BV */ + flash@0 { + compatible = "st,w25q32"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&audio1 { + status = "okay"; + clocks = <&gate_clk 13>, <&si5351 2>; + clock-names = "internal", "extclk"; + pinctrl-0 = <&pmx_audio1_i2s1_spdifo &pmx_audio1_extclk>; + pinctrl-names = "default"; +}; |