diff options
Diffstat (limited to 'arch/arm/boot/dts/microchip/aks-cdu.dts')
-rw-r--r-- | arch/arm/boot/dts/microchip/aks-cdu.dts | 122 |
1 files changed, 122 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/microchip/aks-cdu.dts b/arch/arm/boot/dts/microchip/aks-cdu.dts new file mode 100644 index 0000000000..742fcf525e --- /dev/null +++ b/arch/arm/boot/dts/microchip/aks-cdu.dts @@ -0,0 +1,122 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * aks-cdu.dts - Device Tree file for AK signal CDU + * + * Copyright (C) 2012 AK signal Brno a.s. + * 2012 Jiri Prchal <jiri.prchal@aksignal.cz> + */ + +/dts-v1/; + +#include "ge863-pro3.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,115200 ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs"; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + }; + + ahb { + apb { + usart0: serial@fffb0000 { + status = "okay"; + }; + + usart1: serial@fffb4000 { + status = "okay"; + linux,rs485-enabled-at-boot-time; + rs485-rts-delay = <0 0>; + }; + + usart2: serial@fffb8000 { + status = "okay"; + linux,rs485-enabled-at-boot-time; + rs485-rts-delay = <0 0>; + }; + + usart3: serial@fffd0000 { + status = "okay"; + linux,rs485-enabled-at-boot-time; + rs485-rts-delay = <0 0>; + }; + + macb0: ethernet@fffc4000 { + phy-mode = "rmii"; + status = "okay"; + }; + + usb1: gadget@fffa4000 { + atmel,vbus-gpio = <&pioC 15 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + }; + + usb0: ohci@500000 { + num-ports = <2>; + status = "okay"; + }; + + ebi: ebi@10000000 { + nand_controller: nand-controller { + nand: nand@3 { + partitions { + bootstrap@0 { + label = "bootstrap"; + reg = <0x0 0x40000>; + }; + + uboot@40000 { + label = "uboot"; + reg = <0x40000 0x80000>; + }; + + ubootenv@c0000 { + label = "ubootenv"; + reg = <0xc0000 0x40000>; + }; + + kernel@100000 { + label = "kernel"; + reg = <0x100000 0x400000>; + }; + + rootfs@500000 { + label = "rootfs"; + reg = <0x500000 0x7b00000>; + }; + }; + }; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + red { + gpios = <&pioC 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + }; + + green { + gpios = <&pioA 5 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + default-state = "on"; + }; + + yellow { + gpios = <&pioB 20 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + blue { + gpios = <&pioB 21 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + }; +}; |