diff options
Diffstat (limited to 'arch/arm/boot/dts/microchip/animeo_ip.dts')
-rw-r--r-- | arch/arm/boot/dts/microchip/animeo_ip.dts | 195 |
1 files changed, 195 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/microchip/animeo_ip.dts b/arch/arm/boot/dts/microchip/animeo_ip.dts new file mode 100644 index 0000000000..29936bfbee --- /dev/null +++ b/arch/arm/boot/dts/microchip/animeo_ip.dts @@ -0,0 +1,195 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * animeo_ip.dts - Device Tree file for Somfy Animeo IP Boards + * + * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + */ + +/dts-v1/; +#include "at91sam9260.dtsi" + +/ { + model = "Somfy Animeo IP"; + compatible = "somfy,animeo-ip", "atmel,at91sam9260", "atmel,at91sam9"; + + aliases { + serial0 = &usart1; + serial1 = &usart2; + serial2 = &usart0; + serial3 = &dbgu; + serial4 = &usart3; + serial5 = &uart0; + serial6 = &uart1; + }; + + chosen { + stdout-path = &usart2; + }; + + memory@20000000 { + reg = <0x20000000 0x4000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <18432000>; + }; + }; + + ahb { + apb { + tcb0: timer@fffa0000 { + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>, <1>; + }; + + timer@2 { + compatible = "atmel,tcb-timer"; + reg = <2>; + }; + }; + + usart0: serial@fffb0000 { + pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts>; + linux,rs485-enabled-at-boot-time; + status = "okay"; + }; + + usart1: serial@fffb4000 { + pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts>; + linux,rs485-enabled-at-boot-time; + status = "okay"; + }; + + usart2: serial@fffb8000 { + pinctrl-0 = <&pinctrl_usart2>; + status = "okay"; + }; + + macb0: ethernet@fffc4000 { + pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii>; + phy-mode = "mii"; + status = "okay"; + }; + + mmc0: mmc@fffa8000 { + pinctrl-0 = <&pinctrl_mmc0_clk + &pinctrl_mmc0_slot1_cmd_dat0 + &pinctrl_mmc0_slot1_dat1_3>; + pinctrl-names = "default"; + status = "okay"; + + slot@1 { + reg = <1>; + bus-width = <4>; + }; + }; + + watchdog@fffffd40 { + status = "okay"; + }; + }; + + ebi: ebi@10000000 { + status = "okay"; + + nand_controller: nand-controller { + status = "okay"; + pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; + pinctrl-names = "default"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + barebox@0 { + label = "barebox"; + reg = <0x0 0x58000>; + }; + + u_boot_env@58000 { + label = "u_boot_env"; + reg = <0x58000 0x8000>; + }; + + ubi@60000 { + label = "ubi"; + reg = <0x60000 0x1FA0000>; + }; + }; + }; + }; + }; + + usb0: ohci@500000 { + num-ports = <2>; + atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>; + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + + power_green { + label = "power_green"; + gpios = <&pioC 17 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + power_red { + label = "power_red"; + gpios = <&pioA 2 GPIO_ACTIVE_HIGH>; + }; + + tx_green { + label = "tx_green"; + gpios = <&pioC 19 GPIO_ACTIVE_HIGH>; + }; + + tx_red { + label = "tx_red"; + gpios = <&pioC 18 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-switch-in { + label = "keyswitch_in"; + gpios = <&pioB 1 GPIO_ACTIVE_HIGH>; + linux,code = <28>; + wakeup-source; + }; + + key-error-in { + label = "error_in"; + gpios = <&pioB 2 GPIO_ACTIVE_HIGH>; + linux,code = <29>; + wakeup-source; + }; + + key-s { + label = "btn"; + gpios = <&pioC 23 GPIO_ACTIVE_HIGH>; + linux,code = <31>; + wakeup-source; + }; + }; +}; |