diff options
Diffstat (limited to 'arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts')
-rw-r--r-- | arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts | 269 |
1 files changed, 269 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts new file mode 100644 index 0000000000..e055b9e2fe --- /dev/null +++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts @@ -0,0 +1,269 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * at91-sama5d27_wlsom1_ek.dts - Device Tree file for SAMA5D27 WLSOM1 EK + * + * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries + * + * Author: Nicolas Ferre <nicolas.ferre@microcihp.com> + */ +/dts-v1/; +#include "at91-sama5d27_wlsom1.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "Microchip SAMA5D27 WLSOM1 EK"; + compatible = "microchip,sama5d27-wlsom1-ek", "microchip,sama5d27-wlsom1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5"; + + aliases { + serial0 = &uart0; /* DBGU */ + serial1 = &uart6; /* BT */ + serial2 = &uart5; /* mikro BUS 2 */ + serial3 = &uart3; /* mikro BUS 1 */ + i2c1 = &i2c1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_key_gpio_default>; + + button-1 { + label = "USER BUTTON"; + gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_PROG1>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led_gpio_default>; + status = "okay"; + + led-red { + label = "red"; + gpios = <&pioA PIN_PA6 GPIO_ACTIVE_HIGH>; + }; + + led-green { + label = "green"; + gpios = <&pioA PIN_PA7 GPIO_ACTIVE_HIGH>; + }; + + led-blue { + label = "blue"; + gpios = <&pioA PIN_PA8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&adc { + vddana-supply = <&vdd_3v3>; + vref-supply = <&vdd_3v3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc_default>; + status = "okay"; +}; + +&flx0 { + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; + status = "okay"; + + uart5: serial@200 { + pinctrl-0 = <&pinctrl_flx0_default>; + pinctrl-names = "default"; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; + }; +}; + +&flx1 { + status = "okay"; + + uart6: serial@200 { + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; + }; +}; + +&macb0 { + status = "okay"; +}; + +&pioA { + /* + * There is no real pinmux for ADC, if the pin + * is not requested by another peripheral then + * the muxing is done when channel is enabled. + * Requesting pins for ADC is GPIO is + * encouraged to prevent conflicts and to + * disable bias in order to be in the same + * state when the pin is not muxed to the adc. + */ + pinctrl_adc_default: adc_default { + pinmux = <PIN_PD25__GPIO>, + <PIN_PD26__GPIO>; + bias-disable; + }; + + pinctrl_flx0_default: flx0_usart_default { + pinmux = <PIN_PB28__FLEXCOM0_IO0>, + <PIN_PB29__FLEXCOM0_IO1>; + bias-disable; + }; + + pinctrl_key_gpio_default: key_gpio_default { + pinmux = <PIN_PB2__GPIO>; + bias-pull-up; + }; + + pinctrl_led_gpio_default: led_gpio_default { + pinmux = <PIN_PA6__GPIO>, + <PIN_PA7__GPIO>, + <PIN_PA8__GPIO>; + bias-pull-down; + }; + + pinctrl_sdmmc0_default: sdmmc0_default { + cmd_data { + pinmux = <PIN_PA1__SDMMC0_CMD>, + <PIN_PA2__SDMMC0_DAT0>, + <PIN_PA3__SDMMC0_DAT1>, + <PIN_PA4__SDMMC0_DAT2>, + <PIN_PA5__SDMMC0_DAT3>; + bias-disable; + }; + + ck_cd_vddsel { + pinmux = <PIN_PA0__SDMMC0_CK>, + <PIN_PA11__SDMMC0_VDDSEL>, + <PIN_PA12__SDMMC0_WP>, + <PIN_PA13__SDMMC0_CD>; + bias-disable; + }; + }; + + pinctrl_uart0_default: uart0_default { + pinmux = <PIN_PB26__URXD0>, + <PIN_PB27__UTXD0>; + bias-disable; + }; + + pinctrl_uart3_default: uart3_default { + pinmux = <PIN_PB11__URXD3>, + <PIN_PB12__UTXD3>; + bias-disable; + }; + + pinctrl_pwm0_default: pwm0_default { + pinmux = <PIN_PA31__PWML0>, + <PIN_PA30__PWMH0>; + bias-disable; + }; + + pinctrl_usb_default: usb_default { + pinmux = <PIN_PA10__GPIO>; + bias-disable; + }; + + pinctrl_usba_vbus: usba_vbus { + pinmux = <PIN_PA16__GPIO>; + bias-disable; + }; +}; + +&pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default>; + status = "okay"; +}; + +&qspi1 { + status = "okay"; + + qspi1_flash: flash@0 { + status = "okay"; + }; +}; + +&sdmmc0 { + bus-width = <4>; + mmc-ddr-3_3v; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdmmc0_default>; + status = "okay"; +}; + +&shutdown_controller { + debounce-delay-us = <976>; + atmel,wakeup-rtc-timer; + + input@0 { + reg = <0>; + }; +}; + +&tcb0 { + timer0: timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer1: timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0_default>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_default>; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "okay"; +}; + +&usb0 { + atmel,vbus-gpio = <&pioA PIN_PA16 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usba_vbus>; + status = "okay"; +}; + +&usb1 { + num-ports = <3>; + atmel,vbus-gpio = <0 + &pioA PIN_PA10 GPIO_ACTIVE_HIGH + 0 + >; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_default>; + status = "okay"; +}; + +&usb2 { + phy_type = "hsic"; + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + |