diff options
Diffstat (limited to 'arch/arm/boot/dts/microchip/sama7g5.dtsi')
-rw-r--r-- | arch/arm/boot/dts/microchip/sama7g5.dtsi | 1016 |
1 files changed, 1016 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/microchip/sama7g5.dtsi b/arch/arm/boot/dts/microchip/sama7g5.dtsi new file mode 100644 index 0000000000..269e0a3ca2 --- /dev/null +++ b/arch/arm/boot/dts/microchip/sama7g5.dtsi @@ -0,0 +1,1016 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * sama7g5.dtsi - Device Tree Include file for SAMA7G5 family SoC + * + * Copyright (C) 2020 Microchip Technology, Inc. and its subsidiaries + * + * Author: Eugen Hristev <eugen.hristev@microchip.com> + * Author: Claudiu Beznea <claudiu.beznea@microchip.com> + * + */ + +#include <dt-bindings/iio/adc/at91-sama5d2_adc.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/at91.h> +#include <dt-bindings/dma/at91.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mfd/at91-usart.h> +#include <dt-bindings/nvmem/microchip,sama7g5-otpc.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + model = "Microchip SAMA7G5 family SoC"; + compatible = "microchip,sama7g5"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + clocks = <&pmc PMC_TYPE_CORE PMC_CPUPLL>; + clock-names = "cpu"; + operating-points-v2 = <&cpu_opp_table>; + #cooling-cells = <2>; /* min followed by max */ + }; + }; + + cpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-90000000 { + opp-hz = /bits/ 64 <90000000>; + opp-microvolt = <1050000 1050000 1225000>; + clock-latency-ns = <320000>; + }; + + opp-250000000 { + opp-hz = /bits/ 64 <250000000>; + opp-microvolt = <1050000 1050000 1225000>; + clock-latency-ns = <320000>; + }; + + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1050000 1050000 1225000>; + clock-latency-ns = <320000>; + opp-suspend; + }; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1150000 1125000 1225000>; + clock-latency-ns = <320000>; + }; + + opp-1000000002 { + opp-hz = /bits/ 64 <1000000002>; + opp-microvolt = <1250000 1225000 1300000>; + clock-latency-ns = <320000>; + }; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&thermal_sensor>; + + trips { + cpu_normal: cpu-alert0 { + temperature = <90000>; + hysteresis = <0>; + type = "passive"; + }; + + cpu_hot: cpu-alert1 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + cpu_critical: cpu-critical { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_normal>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&cpu_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + clocks { + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + usb_clk: usb_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; + }; + + vddout25: fixed-regulator-vddout25 { + compatible = "regulator-fixed"; + + regulator-name = "VDDOUT25"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-boot-on; + status = "disabled"; + }; + + ns_sram: sram@100000 { + compatible = "mmio-sram"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x100000 0x20000>; + ranges; + }; + + thermal_sensor: thermal-sensor { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&adc AT91_SAMA7G5_ADC_TEMP_CHANNEL>; + io-channel-names = "sensor-channel"; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + nfc_sram: sram@600000 { + compatible = "mmio-sram"; + no-memory-wc; + reg = <0x00600000 0x2400>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00600000 0x2400>; + }; + + nfc_io: nfc-io@10000000 { + compatible = "atmel,sama5d3-nfc-io", "syscon"; + reg = <0x10000000 0x8000000>; + }; + + ebi: ebi@40000000 { + compatible = "atmel,sama5d3-ebi"; + #address-cells = <2>; + #size-cells = <1>; + atmel,smc = <&hsmc>; + reg = <0x40000000 0x20000000>; + ranges = <0x0 0x0 0x40000000 0x8000000 + 0x1 0x0 0x48000000 0x8000000 + 0x2 0x0 0x50000000 0x8000000 + 0x3 0x0 0x58000000 0x8000000>; + clocks = <&pmc PMC_TYPE_CORE PMC_MCK1>; + status = "disabled"; + + nand_controller: nand-controller { + compatible = "atmel,sama5d3-nand-controller"; + atmel,nfc-sram = <&nfc_sram>; + atmel,nfc-io = <&nfc_io>; + ecc-engine = <&pmecc>; + #address-cells = <2>; + #size-cells = <1>; + ranges; + status = "disabled"; + }; + }; + + securam: sram@e0000000 { + compatible = "microchip,sama7g5-securam", "atmel,sama5d2-securam", "mmio-sram"; + reg = <0xe0000000 0x4000>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 18>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xe0000000 0x4000>; + no-memory-wc; + }; + + secumod: secumod@e0004000 { + compatible = "microchip,sama7g5-secumod", "atmel,sama5d2-secumod", "syscon"; + reg = <0xe0004000 0x4000>; + gpio-controller; + #gpio-cells = <2>; + }; + + sfrbu: sfr@e0008000 { + compatible = "microchip,sama7g5-sfrbu", "atmel,sama5d2-sfrbu", "syscon"; + reg = <0xe0008000 0x20>; + }; + + pioA: pinctrl@e0014000 { + compatible = "microchip,sama7g5-pinctrl"; + reg = <0xe0014000 0x800>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; + }; + + pmc: clock-controller@e0018000 { + compatible = "microchip,sama7g5-pmc", "syscon"; + reg = <0xe0018000 0x200>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <2>; + clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>; + clock-names = "td_slck", "md_slck", "main_xtal"; + }; + + reset_controller: reset-controller@e001d000 { + compatible = "microchip,sama7g5-rstc"; + reg = <0xe001d000 0xc>, <0xe001d0e4 0x4>; + #reset-cells = <1>; + clocks = <&clk32k 0>; + }; + + shdwc: poweroff@e001d010 { + compatible = "microchip,sama7g5-shdwc", "syscon"; + reg = <0xe001d010 0x10>; + clocks = <&clk32k 0>; + #address-cells = <1>; + #size-cells = <0>; + atmel,wakeup-rtc-timer; + atmel,wakeup-rtt-timer; + status = "disabled"; + }; + + rtt: rtc@e001d020 { + compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt"; + reg = <0xe001d020 0x30>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk32k 0>; + }; + + clk32k: clock-controller@e001d050 { + compatible = "microchip,sama7g5-sckc", "microchip,sam9x60-sckc"; + reg = <0xe001d050 0x4>; + clocks = <&slow_xtal>; + #clock-cells = <1>; + }; + + gpbr: gpbr@e001d060 { + compatible = "microchip,sama7g5-gpbr", "syscon"; + reg = <0xe001d060 0x48>; + }; + + rtc: rtc@e001d0a8 { + compatible = "microchip,sama7g5-rtc", "microchip,sam9x60-rtc"; + reg = <0xe001d0a8 0x30>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk32k 1>; + }; + + ps_wdt: watchdog@e001d180 { + compatible = "microchip,sama7g5-wdt"; + reg = <0xe001d180 0x24>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk32k 0>; + }; + + chipid@e0020000 { + compatible = "microchip,sama7g5-chipid"; + reg = <0xe0020000 0x8>; + }; + + tcb1: timer@e0800000 { + compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe0800000 0x100>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 91>, <&pmc PMC_TYPE_PERIPHERAL 92>, <&pmc PMC_TYPE_PERIPHERAL 93>, <&clk32k 1>; + clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; + }; + + hsmc: hsmc@e0808000 { + compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd"; + reg = <0xe0808000 0x1000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pmecc: ecc-engine@e0808070 { + compatible = "atmel,sama5d2-pmecc"; + reg = <0xe0808070 0x490>, + <0xe0808500 0x200>; + }; + }; + + qspi0: spi@e080c000 { + compatible = "microchip,sama7g5-ospi"; + reg = <0xe080c000 0x400>, <0x20000000 0x10000000>; + reg-names = "qspi_base", "qspi_mmap"; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(41)>, + <&dma0 AT91_XDMAC_DT_PERID(40)>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 78>, <&pmc PMC_TYPE_GCK 78>; + clock-names = "pclk", "gclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + qspi1: spi@e0810000 { + compatible = "microchip,sama7g5-qspi"; + reg = <0xe0810000 0x400>, <0x30000000 0x10000000>; + reg-names = "qspi_base", "qspi_mmap"; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(43)>, + <&dma0 AT91_XDMAC_DT_PERID(42)>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 79>, <&pmc PMC_TYPE_GCK 79>; + clock-names = "pclk", "gclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + can0: can@e0828000 { + compatible = "bosch,m_can"; + reg = <0xe0828000 0x100>, <0x100000 0x7800>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 61>, <&pmc PMC_TYPE_GCK 61>; + clock-names = "hclk", "cclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 61>; + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>; + assigned-clock-rates = <40000000>; + bosch,mram-cfg = <0x3400 0 0 64 0 0 32 32>; + status = "disabled"; + }; + + can1: can@e082c000 { + compatible = "bosch,m_can"; + reg = <0xe082c000 0x100>, <0x100000 0xbc00>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 62>, <&pmc PMC_TYPE_GCK 62>; + clock-names = "hclk", "cclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 62>; + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>; + assigned-clock-rates = <40000000>; + bosch,mram-cfg = <0x7800 0 0 64 0 0 32 32>; + status = "disabled"; + }; + + can2: can@e0830000 { + compatible = "bosch,m_can"; + reg = <0xe0830000 0x100>, <0x100000 0x10000>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 63>, <&pmc PMC_TYPE_GCK 63>; + clock-names = "hclk", "cclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 63>; + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>; + assigned-clock-rates = <40000000>; + bosch,mram-cfg = <0xbc00 0 0 64 0 0 32 32>; + status = "disabled"; + }; + + can3: can@e0834000 { + compatible = "bosch,m_can"; + reg = <0xe0834000 0x100>, <0x110000 0x4400>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 64>, <&pmc PMC_TYPE_GCK 64>; + clock-names = "hclk", "cclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 64>; + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>; + assigned-clock-rates = <40000000>; + bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>; + status = "disabled"; + }; + + can4: can@e0838000 { + compatible = "bosch,m_can"; + reg = <0xe0838000 0x100>, <0x110000 0x8800>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 65>, <&pmc PMC_TYPE_GCK 65>; + clock-names = "hclk", "cclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 65>; + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>; + assigned-clock-rates = <40000000>; + bosch,mram-cfg = <0x4400 0 0 64 0 0 32 32>; + status = "disabled"; + }; + + can5: can@e083c000 { + compatible = "bosch,m_can"; + reg = <0xe083c000 0x100>, <0x110000 0xcc00>; + reg-names = "m_can", "message_ram"; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "int0", "int1"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 66>, <&pmc PMC_TYPE_GCK 66>; + clock-names = "hclk", "cclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 66>; + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>; + assigned-clock-rates = <40000000>; + bosch,mram-cfg = <0x8800 0 0 64 0 0 32 32>; + status = "disabled"; + }; + + adc: adc@e1000000 { + compatible = "microchip,sama7g5-adc"; + reg = <0xe1000000 0x200>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_GCK 26>; + assigned-clocks = <&pmc PMC_TYPE_GCK 26>; + assigned-clock-rates = <100000000>; + clock-names = "adc_clk"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(0)>; + dma-names = "rx"; + atmel,min-sample-rate-hz = <200000>; + atmel,max-sample-rate-hz = <20000000>; + atmel,startup-time-ms = <4>; + #io-channel-cells = <1>; + nvmem-cells = <&temperature_calib>; + nvmem-cell-names = "temperature_calib"; + status = "disabled"; + }; + + sdmmc0: mmc@e1204000 { + compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci"; + reg = <0xe1204000 0x4000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 80>, <&pmc PMC_TYPE_GCK 80>; + clock-names = "hclock", "multclk"; + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>; + assigned-clocks = <&pmc PMC_TYPE_GCK 80>; + assigned-clock-rates = <200000000>; + microchip,sdcal-inverted; + status = "disabled"; + }; + + sdmmc1: mmc@e1208000 { + compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci"; + reg = <0xe1208000 0x4000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 81>, <&pmc PMC_TYPE_GCK 81>; + clock-names = "hclock", "multclk"; + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>; + assigned-clocks = <&pmc PMC_TYPE_GCK 81>; + assigned-clock-rates = <200000000>; + microchip,sdcal-inverted; + status = "disabled"; + }; + + sdmmc2: mmc@e120c000 { + compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci"; + reg = <0xe120c000 0x4000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 82>, <&pmc PMC_TYPE_GCK 82>; + clock-names = "hclock", "multclk"; + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>; + assigned-clocks = <&pmc PMC_TYPE_GCK 82>; + assigned-clock-rates = <200000000>; + microchip,sdcal-inverted; + status = "disabled"; + }; + + csi2dc: csi2dc@e1404000 { + compatible = "microchip,sama7g5-csi2dc"; + reg = <0xe1404000 0x500>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&xisc>; + clock-names = "pclk", "scck"; + assigned-clocks = <&xisc>; + assigned-clock-rates = <266000000>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + csi2dc_in: endpoint { + }; + }; + + port@1 { + reg = <1>; + csi2dc_out: endpoint { + bus-width = <14>; + hsync-active = <1>; + vsync-active = <1>; + remote-endpoint = <&xisc_in>; + }; + }; + }; + }; + + xisc: xisc@e1408000 { + compatible = "microchip,sama7g5-isc"; + reg = <0xe1408000 0x2000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 56>; + clock-names = "hclock"; + #clock-cells = <0>; + clock-output-names = "isc-mck"; + status = "disabled"; + + port { + xisc_in: endpoint { + bus-type = <5>; /* Parallel */ + bus-width = <14>; + hsync-active = <1>; + vsync-active = <1>; + remote-endpoint = <&csi2dc_out>; + }; + }; + }; + + pwm: pwm@e1604000 { + compatible = "microchip,sama7g5-pwm", "atmel,sama5d2-pwm"; + reg = <0xe1604000 0x4000>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + #pwm-cells = <3>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 77>; + status = "disabled"; + }; + + pdmc0: sound@e1608000 { + compatible = "microchip,sama7g5-pdmc"; + reg = <0xe1608000 0x1000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + #sound-dai-cells = <0>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(37)>; + dma-names = "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 68>, <&pmc PMC_TYPE_GCK 68>; + clock-names = "pclk", "gclk"; + status = "disabled"; + }; + + pdmc1: sound@e160c000 { + compatible = "microchip,sama7g5-pdmc"; + reg = <0xe160c000 0x1000>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + #sound-dai-cells = <0>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(38)>; + dma-names = "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 69>, <&pmc PMC_TYPE_GCK 69>; + clock-names = "pclk", "gclk"; + status = "disabled"; + }; + + spdifrx: spdifrx@e1614000 { + #sound-dai-cells = <0>; + compatible = "microchip,sama7g5-spdifrx"; + reg = <0xe1614000 0x4000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(49)>; + dma-names = "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 84>, <&pmc PMC_TYPE_GCK 84>; + clock-names = "pclk", "gclk"; + status = "disabled"; + }; + + spdiftx: spdiftx@e1618000 { + #sound-dai-cells = <0>; + compatible = "microchip,sama7g5-spdiftx"; + reg = <0xe1618000 0x4000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(50)>; + dma-names = "tx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 85>, <&pmc PMC_TYPE_GCK 85>; + clock-names = "pclk", "gclk"; + }; + + i2s0: i2s@e161c000 { + compatible = "microchip,sama7g5-i2smcc"; + #sound-dai-cells = <0>; + reg = <0xe161c000 0x4000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(34)>, <&dma0 AT91_XDMAC_DT_PERID(33)>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 57>, <&pmc PMC_TYPE_GCK 57>; + clock-names = "pclk", "gclk"; + status = "disabled"; + }; + + i2s1: i2s@e1620000 { + compatible = "microchip,sama7g5-i2smcc"; + #sound-dai-cells = <0>; + reg = <0xe1620000 0x4000>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(36)>, <&dma0 AT91_XDMAC_DT_PERID(35)>; + dma-names = "tx", "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>; + clock-names = "pclk", "gclk"; + status = "disabled"; + }; + + eic: interrupt-controller@e1628000 { + compatible = "microchip,sama7g5-eic"; + reg = <0xe1628000 0xec>; + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 37>; + clock-names = "pclk"; + status = "disabled"; + }; + + pit64b0: timer@e1800000 { + compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b"; + reg = <0xe1800000 0x4000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 70>, <&pmc PMC_TYPE_GCK 70>; + clock-names = "pclk", "gclk"; + }; + + pit64b1: timer@e1804000 { + compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b"; + reg = <0xe1804000 0x4000>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 71>, <&pmc PMC_TYPE_GCK 71>; + clock-names = "pclk", "gclk"; + }; + + aes: crypto@e1810000 { + compatible = "atmel,at91sam9g46-aes"; + reg = <0xe1810000 0x100>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 27>; + clock-names = "aes_clk"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>, + <&dma0 AT91_XDMAC_DT_PERID(2)>; + dma-names = "tx", "rx"; + }; + + sha: crypto@e1814000 { + compatible = "atmel,at91sam9g46-sha"; + reg = <0xe1814000 0x100>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 83>; + clock-names = "sha_clk"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>; + dma-names = "tx"; + }; + + flx0: flexcom@e1818000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xe1818000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xe1818000 0x800>; + status = "disabled"; + + uart0: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; + clock-names = "usart"; + dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>, + <&dma1 AT91_XDMAC_DT_PERID(5)>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; + }; + + flx1: flexcom@e181c000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xe181c000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xe181c000 0x800>; + status = "disabled"; + + i2c1: i2c@600 { + compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; + atmel,fifo-size = <32>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>, + <&dma0 AT91_XDMAC_DT_PERID(7)>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + }; + + flx3: flexcom@e1824000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xe1824000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 41>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xe1824000 0x800>; + status = "disabled"; + + uart3: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 41>; + clock-names = "usart"; + dmas = <&dma1 AT91_XDMAC_DT_PERID(12)>, + <&dma1 AT91_XDMAC_DT_PERID(11)>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + status = "disabled"; + }; + }; + + trng: rng@e2010000 { + compatible = "microchip,sama7g5-trng", "atmel,at91sam9g45-trng"; + reg = <0xe2010000 0x100>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 97>; + status = "disabled"; + }; + + tdes: crypto@e2014000 { + compatible = "atmel,at91sam9g46-tdes"; + reg = <0xe2014000 0x100>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 96>; + clock-names = "tdes_clk"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>, + <&dma0 AT91_XDMAC_DT_PERID(53)>; + dma-names = "tx", "rx"; + }; + + flx4: flexcom@e2018000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xe2018000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 42>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xe2018000 0x800>; + status = "disabled"; + + uart4: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 42>; + clock-names = "usart"; + dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>, + <&dma1 AT91_XDMAC_DT_PERID(13)>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + flx7: flexcom@e2024000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xe2024000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 45>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xe2024000 0x800>; + status = "disabled"; + + uart7: serial@200 { + compatible = "atmel,at91sam9260-usart"; + reg = <0x200 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 45>; + clock-names = "usart"; + dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>, + <&dma1 AT91_XDMAC_DT_PERID(19)>; + dma-names = "tx", "rx"; + atmel,use-dma-rx; + atmel,use-dma-tx; + atmel,fifo-size = <16>; + status = "disabled"; + }; + }; + + gmac0: ethernet@e2800000 { + compatible = "microchip,sama7g5-gem"; + reg = <0xe2800000 0x1000>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_GCK 51>, <&pmc PMC_TYPE_GCK 53>; + clock-names = "pclk", "hclk", "tx_clk", "tsu_clk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 51>; + assigned-clock-rates = <125000000>; + status = "disabled"; + }; + + gmac1: ethernet@e2804000 { + compatible = "microchip,sama7g5-emac"; + reg = <0xe2804000 0x1000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 52>, <&pmc PMC_TYPE_PERIPHERAL 52>; + clock-names = "pclk", "hclk"; + status = "disabled"; + }; + + dma0: dma-controller@e2808000 { + compatible = "microchip,sama7g5-dma"; + reg = <0xe2808000 0x1000>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; + clock-names = "dma_clk"; + status = "disabled"; + }; + + dma1: dma-controller@e280c000 { + compatible = "microchip,sama7g5-dma"; + reg = <0xe280c000 0x1000>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; + clock-names = "dma_clk"; + status = "disabled"; + }; + + /* Place dma2 here despite it's address */ + dma2: dma-controller@e1200000 { + compatible = "microchip,sama7g5-dma"; + reg = <0xe1200000 0x1000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 24>; + clock-names = "dma_clk"; + dma-requests = <0>; + status = "disabled"; + }; + + tcb0: timer@e2814000 { + compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xe2814000 0x100>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 88>, <&pmc PMC_TYPE_PERIPHERAL 89>, <&pmc PMC_TYPE_PERIPHERAL 90>, <&clk32k 1>; + clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; + }; + + flx8: flexcom@e2818000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xe2818000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 46>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xe2818000 0x800>; + status = "disabled"; + + i2c8: i2c@600 { + compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 46>; + atmel,fifo-size = <32>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>, + <&dma0 AT91_XDMAC_DT_PERID(21)>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + }; + + flx9: flexcom@e281c000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xe281c000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 47>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xe281c000 0x800>; + status = "disabled"; + + i2c9: i2c@600 { + compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c"; + reg = <0x600 0x200>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 47>; + atmel,fifo-size = <32>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>, + <&dma0 AT91_XDMAC_DT_PERID(23)>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + }; + + flx11: flexcom@e2824000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xe2824000 0x200>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 49>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xe2824000 0x800>; + status = "disabled"; + + spi11: spi@400 { + compatible = "atmel,at91rm9200-spi"; + reg = <0x400 0x200>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 49>; + clock-names = "spi_clk"; + #address-cells = <1>; + #size-cells = <0>; + atmel,fifo-size = <32>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(28)>, + <&dma0 AT91_XDMAC_DT_PERID(27)>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + }; + + uddrc: uddrc@e3800000 { + compatible = "microchip,sama7g5-uddrc"; + reg = <0xe3800000 0x4000>; + }; + + ddr3phy: ddr3phy@e3804000 { + compatible = "microchip,sama7g5-ddr3phy"; + reg = <0xe3804000 0x1000>; + }; + + otpc: efuse@e8c00000 { + compatible = "microchip,sama7g5-otpc", "syscon"; + reg = <0xe8c00000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + + temperature_calib: calib@1 { + reg = <OTP_PKT(1) 76>; + }; + }; + + gic: interrupt-controller@e8c11000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0xe8c11000 0x1000>, + <0xe8c12000 0x2000>; + }; + }; +}; |