diff options
Diffstat (limited to 'arch/arm/boot/dts/nxp/imx/imx27.dtsi')
-rw-r--r-- | arch/arm/boot/dts/nxp/imx/imx27.dtsi | 593 |
1 files changed, 593 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/nxp/imx/imx27.dtsi b/arch/arm/boot/dts/nxp/imx/imx27.dtsi new file mode 100644 index 0000000000..faba12ee74 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx27.dtsi @@ -0,0 +1,593 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright 2012 Sascha Hauer, Pengutronix + +#include "imx27-pinfunc.h" + +#include <dt-bindings/clock/imx27-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + /* + * The decompressor and also some bootloaders rely on a + * pre-existing /chosen node to be available to insert the + * command line and merge other ATAGS info. + */ + chosen {}; + + aliases { + ethernet0 = &fec; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + i2c0 = &i2c1; + i2c1 = &i2c2; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &uart6; + spi0 = &cspi1; + spi1 = &cspi2; + spi2 = &cspi3; + }; + + aitc: aitc-interrupt-controller@10040000 { + compatible = "fsl,imx27-aitc", "fsl,avic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x10040000 0x1000>; + }; + + clocks { + clk_osc26m: osc26m { + compatible = "fsl,imx-osc26m", "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + }; + + cpus { + #size-cells = <0>; + #address-cells = <1>; + + cpu: cpu@0 { + device_type = "cpu"; + reg = <0>; + compatible = "arm,arm926ej-s"; + operating-points = < + /* kHz uV */ + 266000 1300000 + 399000 1450000 + >; + clock-latency = <62500>; + clocks = <&clks IMX27_CLK_CPU_DIV>; + voltage-tolerance = <5>; + }; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&aitc>; + ranges; + + aipi1: aipi@10000000 { /* AIPI1 */ + compatible = "fsl,aipi-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x10000000 0x20000>; + ranges; + + dma: dma@10001000 { + compatible = "fsl,imx27-dma"; + reg = <0x10001000 0x1000>; + interrupts = <32>; + clocks = <&clks IMX27_CLK_DMA_IPG_GATE>, + <&clks IMX27_CLK_DMA_AHB_GATE>; + clock-names = "ipg", "ahb"; + #dma-cells = <1>; + dma-channels = <16>; + }; + + wdog: watchdog@10002000 { + compatible = "fsl,imx27-wdt", "fsl,imx21-wdt"; + reg = <0x10002000 0x1000>; + interrupts = <27>; + clocks = <&clks IMX27_CLK_WDOG_IPG_GATE>; + }; + + gpt1: timer@10003000 { + compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; + reg = <0x10003000 0x1000>; + interrupts = <26>; + clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; + clock-names = "ipg", "per"; + }; + + gpt2: timer@10004000 { + compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; + reg = <0x10004000 0x1000>; + interrupts = <25>; + clocks = <&clks IMX27_CLK_GPT2_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; + clock-names = "ipg", "per"; + }; + + gpt3: timer@10005000 { + compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; + reg = <0x10005000 0x1000>; + interrupts = <24>; + clocks = <&clks IMX27_CLK_GPT3_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; + clock-names = "ipg", "per"; + }; + + pwm: pwm@10006000 { + #pwm-cells = <3>; + compatible = "fsl,imx27-pwm"; + reg = <0x10006000 0x1000>; + interrupts = <23>; + clocks = <&clks IMX27_CLK_PWM_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; + clock-names = "ipg", "per"; + }; + + rtc: rtc@10007000 { + compatible = "fsl,imx21-rtc"; + reg = <0x10007000 0x1000>; + interrupts = <22>; + clocks = <&clks IMX27_CLK_CKIL>, + <&clks IMX27_CLK_RTC_IPG_GATE>; + clock-names = "ref", "ipg"; + }; + + kpp: kpp@10008000 { + compatible = "fsl,imx27-kpp", "fsl,imx21-kpp"; + reg = <0x10008000 0x1000>; + interrupts = <21>; + clocks = <&clks IMX27_CLK_KPP_IPG_GATE>; + status = "disabled"; + }; + + owire: owire@10009000 { + compatible = "fsl,imx27-owire", "fsl,imx21-owire"; + reg = <0x10009000 0x1000>; + clocks = <&clks IMX27_CLK_OWIRE_IPG_GATE>; + status = "disabled"; + }; + + uart1: serial@1000a000 { + compatible = "fsl,imx27-uart", "fsl,imx21-uart"; + reg = <0x1000a000 0x1000>; + interrupts = <20>; + clocks = <&clks IMX27_CLK_UART1_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart2: serial@1000b000 { + compatible = "fsl,imx27-uart", "fsl,imx21-uart"; + reg = <0x1000b000 0x1000>; + interrupts = <19>; + clocks = <&clks IMX27_CLK_UART2_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart3: serial@1000c000 { + compatible = "fsl,imx27-uart", "fsl,imx21-uart"; + reg = <0x1000c000 0x1000>; + interrupts = <18>; + clocks = <&clks IMX27_CLK_UART3_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart4: serial@1000d000 { + compatible = "fsl,imx27-uart", "fsl,imx21-uart"; + reg = <0x1000d000 0x1000>; + interrupts = <17>; + clocks = <&clks IMX27_CLK_UART4_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + cspi1: spi@1000e000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx27-cspi"; + reg = <0x1000e000 0x1000>; + interrupts = <16>; + clocks = <&clks IMX27_CLK_CSPI1_IPG_GATE>, + <&clks IMX27_CLK_PER2_GATE>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + cspi2: spi@1000f000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx27-cspi"; + reg = <0x1000f000 0x1000>; + interrupts = <15>; + clocks = <&clks IMX27_CLK_CSPI2_IPG_GATE>, + <&clks IMX27_CLK_PER2_GATE>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ssi1: ssi@10010000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx27-ssi", "fsl,imx21-ssi"; + reg = <0x10010000 0x1000>; + interrupts = <14>; + clocks = <&clks IMX27_CLK_SSI1_IPG_GATE>; + dmas = <&dma 12>, <&dma 13>, <&dma 14>, <&dma 15>; + dma-names = "rx0", "tx0", "rx1", "tx1"; + fsl,fifo-depth = <8>; + status = "disabled"; + }; + + ssi2: ssi@10011000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx27-ssi", "fsl,imx21-ssi"; + reg = <0x10011000 0x1000>; + interrupts = <13>; + clocks = <&clks IMX27_CLK_SSI2_IPG_GATE>; + dmas = <&dma 8>, <&dma 9>, <&dma 10>, <&dma 11>; + dma-names = "rx0", "tx0", "rx1", "tx1"; + fsl,fifo-depth = <8>; + status = "disabled"; + }; + + i2c1: i2c@10012000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx27-i2c", "fsl,imx21-i2c"; + reg = <0x10012000 0x1000>; + interrupts = <12>; + clocks = <&clks IMX27_CLK_I2C1_IPG_GATE>; + status = "disabled"; + }; + + sdhci1: mmc@10013000 { + compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; + reg = <0x10013000 0x1000>; + interrupts = <11>; + clocks = <&clks IMX27_CLK_SDHC1_IPG_GATE>, + <&clks IMX27_CLK_PER2_GATE>; + clock-names = "ipg", "per"; + dmas = <&dma 7>; + dma-names = "rx-tx"; + status = "disabled"; + }; + + sdhci2: mmc@10014000 { + compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; + reg = <0x10014000 0x1000>; + interrupts = <10>; + clocks = <&clks IMX27_CLK_SDHC2_IPG_GATE>, + <&clks IMX27_CLK_PER2_GATE>; + clock-names = "ipg", "per"; + dmas = <&dma 6>; + dma-names = "rx-tx"; + status = "disabled"; + }; + + iomuxc: iomuxc@10015000 { + compatible = "fsl,imx27-iomuxc"; + reg = <0x10015000 0x600>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio1: gpio@10015000 { + compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; + reg = <0x10015000 0x100>; + clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>; + interrupts = <8>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@10015100 { + compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; + reg = <0x10015100 0x100>; + clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>; + interrupts = <8>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@10015200 { + compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; + reg = <0x10015200 0x100>; + clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>; + interrupts = <8>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@10015300 { + compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; + reg = <0x10015300 0x100>; + clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>; + interrupts = <8>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@10015400 { + compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; + reg = <0x10015400 0x100>; + clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>; + interrupts = <8>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio6: gpio@10015500 { + compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; + reg = <0x10015500 0x100>; + clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>; + interrupts = <8>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + audmux: audmux@10016000 { + compatible = "fsl,imx27-audmux", "fsl,imx21-audmux"; + reg = <0x10016000 0x1000>; + clocks = <&clks IMX27_CLK_DUMMY>; + clock-names = "audmux"; + status = "disabled"; + }; + + cspi3: spi@10017000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx27-cspi"; + reg = <0x10017000 0x1000>; + interrupts = <6>; + clocks = <&clks IMX27_CLK_CSPI3_IPG_GATE>, + <&clks IMX27_CLK_PER2_GATE>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + gpt4: timer@10019000 { + compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; + reg = <0x10019000 0x1000>; + interrupts = <4>; + clocks = <&clks IMX27_CLK_GPT4_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; + clock-names = "ipg", "per"; + }; + + gpt5: timer@1001a000 { + compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; + reg = <0x1001a000 0x1000>; + interrupts = <3>; + clocks = <&clks IMX27_CLK_GPT5_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; + clock-names = "ipg", "per"; + }; + + uart5: serial@1001b000 { + compatible = "fsl,imx27-uart", "fsl,imx21-uart"; + reg = <0x1001b000 0x1000>; + interrupts = <49>; + clocks = <&clks IMX27_CLK_UART5_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart6: serial@1001c000 { + compatible = "fsl,imx27-uart", "fsl,imx21-uart"; + reg = <0x1001c000 0x1000>; + interrupts = <48>; + clocks = <&clks IMX27_CLK_UART6_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + i2c2: i2c@1001d000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx27-i2c", "fsl,imx21-i2c"; + reg = <0x1001d000 0x1000>; + interrupts = <1>; + clocks = <&clks IMX27_CLK_I2C2_IPG_GATE>; + status = "disabled"; + }; + + sdhci3: mmc@1001e000 { + compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; + reg = <0x1001e000 0x1000>; + interrupts = <9>; + clocks = <&clks IMX27_CLK_SDHC3_IPG_GATE>, + <&clks IMX27_CLK_PER2_GATE>; + clock-names = "ipg", "per"; + dmas = <&dma 36>; + dma-names = "rx-tx"; + status = "disabled"; + }; + + gpt6: timer@1001f000 { + compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; + reg = <0x1001f000 0x1000>; + interrupts = <2>; + clocks = <&clks IMX27_CLK_GPT6_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; + clock-names = "ipg", "per"; + }; + }; + + aipi2: aipi@10020000 { /* AIPI2 */ + compatible = "fsl,aipi-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x10020000 0x20000>; + ranges; + + fb: fb@10021000 { + compatible = "fsl,imx27-fb", "fsl,imx21-fb"; + interrupts = <61>; + reg = <0x10021000 0x1000>; + clocks = <&clks IMX27_CLK_LCDC_IPG_GATE>, + <&clks IMX27_CLK_LCDC_AHB_GATE>, + <&clks IMX27_CLK_PER3_GATE>; + clock-names = "ipg", "ahb", "per"; + status = "disabled"; + }; + + coda: coda@10023000 { + compatible = "fsl,imx27-vpu", "cnm,codadx6"; + reg = <0x10023000 0x0200>; + interrupts = <53>; + clocks = <&clks IMX27_CLK_VPU_BAUD_GATE>, + <&clks IMX27_CLK_VPU_AHB_GATE>; + clock-names = "per", "ahb"; + iram = <&iram>; + }; + + usbotg: usb@10024000 { + compatible = "fsl,imx27-usb"; + reg = <0x10024000 0x200>; + interrupts = <56>; + clocks = <&clks IMX27_CLK_USB_IPG_GATE>, + <&clks IMX27_CLK_USB_AHB_GATE>, + <&clks IMX27_CLK_USB_DIV>; + clock-names = "ipg", "ahb", "per"; + fsl,usbmisc = <&usbmisc 0>; + status = "disabled"; + }; + + usbh1: usb@10024200 { + compatible = "fsl,imx27-usb"; + reg = <0x10024200 0x200>; + interrupts = <54>; + clocks = <&clks IMX27_CLK_USB_IPG_GATE>, + <&clks IMX27_CLK_USB_AHB_GATE>, + <&clks IMX27_CLK_USB_DIV>; + clock-names = "ipg", "ahb", "per"; + fsl,usbmisc = <&usbmisc 1>; + dr_mode = "host"; + status = "disabled"; + }; + + usbh2: usb@10024400 { + compatible = "fsl,imx27-usb"; + reg = <0x10024400 0x200>; + interrupts = <55>; + clocks = <&clks IMX27_CLK_USB_IPG_GATE>, + <&clks IMX27_CLK_USB_AHB_GATE>, + <&clks IMX27_CLK_USB_DIV>; + clock-names = "ipg", "ahb", "per"; + fsl,usbmisc = <&usbmisc 2>; + dr_mode = "host"; + status = "disabled"; + }; + + usbmisc: usbmisc@10024600 { + #index-cells = <1>; + compatible = "fsl,imx27-usbmisc"; + reg = <0x10024600 0x200>; + }; + + sahara2: crypto@10025000 { + compatible = "fsl,imx27-sahara"; + reg = <0x10025000 0x1000>; + interrupts = <59>; + clocks = <&clks IMX27_CLK_SAHARA_IPG_GATE>, + <&clks IMX27_CLK_SAHARA_AHB_GATE>; + clock-names = "ipg", "ahb"; + }; + + clks: ccm@10027000 { + compatible = "fsl,imx27-ccm"; + reg = <0x10027000 0x1000>; + #clock-cells = <1>; + }; + + iim: efuse@10028000 { + compatible = "fsl,imx27-iim"; + reg = <0x10028000 0x1000>; + interrupts = <62>; + clocks = <&clks IMX27_CLK_IIM_IPG_GATE>; + }; + + fec: ethernet@1002b000 { + compatible = "fsl,imx27-fec"; + reg = <0x1002b000 0x1000>; + interrupts = <50>; + clocks = <&clks IMX27_CLK_FEC_IPG_GATE>, + <&clks IMX27_CLK_FEC_AHB_GATE>; + clock-names = "ipg", "ahb"; + status = "disabled"; + }; + }; + + nfc: nand-controller@d8000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,imx27-nand"; + reg = <0xd8000000 0x1000>; + interrupts = <29>; + clocks = <&clks IMX27_CLK_NFC_BAUD_GATE>; + status = "disabled"; + }; + + weim: weim@d8002000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,imx27-weim"; + reg = <0xd8002000 0x1000>; + clocks = <&clks IMX27_CLK_EMI_AHB_GATE>; + ranges = < + 0 0 0xc0000000 0x08000000 + 1 0 0xc8000000 0x08000000 + 2 0 0xd0000000 0x02000000 + 3 0 0xd2000000 0x02000000 + 4 0 0xd4000000 0x02000000 + 5 0 0xd6000000 0x02000000 + >; + status = "disabled"; + }; + + iram: sram@ffff4c00 { + compatible = "mmio-sram"; + reg = <0xffff4c00 0xb400>; + }; + }; +}; |