diff options
Diffstat (limited to 'arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som.dtsi')
-rw-r--r-- | arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som.dtsi | 158 |
1 files changed, 158 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som.dtsi new file mode 100644 index 0000000000..ce543e325c --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sr-som.dtsi @@ -0,0 +1,158 @@ +/* + * Copyright (C) 2013,2014 Russell King + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include <dt-bindings/gpio/gpio.h> + +/ { + vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-name = "vcc_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_microsom_enet_ar8035>; + phy-mode = "rgmii-id"; + + /* + * The PHY seems to require a long-enough reset duration to avoid + * some rare issues where the PHY gets stuck in an inconsistent and + * non-functional state at boot-up. 10ms proved to be fine . + */ + phy-reset-duration = <10>; + phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* + * The PHY can appear at either address 0 or 4 due to the + * configuration (LED) pin not being pulled sufficiently. + */ + ethernet-phy@0 { + reg = <0>; + qca,clk-out-frequency = <125000000>; + qca,smarteee-tw-us-1g = <24>; + }; + + ethernet-phy@4 { + reg = <4>; + qca,clk-out-frequency = <125000000>; + qca,smarteee-tw-us-1g = <24>; + }; + + /* + * ADIN1300 (som rev 1.9 or later) is always at address 1. It + * will be enabled automatically by U-Boot if detected. + */ + ethernet-phy@1 { + reg = <1>; + adi,phy-output-clock = "125mhz-free-running"; + status = "disabled"; + }; + }; +}; + +&iomuxc { + microsom { + pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + /* AR8035 reset */ + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0 + /* AR8035 interrupt */ + MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 + /* GPIO16 -> AR8035 25MHz */ + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x13030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */ + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1 + /* AR8035 pin strapping: IO voltage: pull up */ + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + /* AR8035 pin strapping: PHYADDR#0: pull down */ + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030 + /* AR8035 pin strapping: PHYADDR#1: pull down */ + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030 + /* AR8035 pin strapping: MODE#1: pull up */ + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + /* AR8035 pin strapping: MODE#3: pull up */ + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + /* AR8035 pin strapping: MODE#0: pull down */ + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030 + + /* + * As the RMII pins are also connected to RGMII + * so that an AR8030 can be placed, set these + * to high-z with the same pulls as above. + * Use the GPIO settings to avoid changing the + * input select registers. + */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x03000 + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x03000 + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x03000 + >; + }; + + pinctrl_microsom_uart1: microsom-uart1 { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_microsom_uart1>; + status = "okay"; +}; |