diff options
Diffstat (limited to 'arch/arm/boot/dts/nxp/mxs/imx28-cfa10058.dts')
-rw-r--r-- | arch/arm/boot/dts/nxp/mxs/imx28-cfa10058.dts | 121 |
1 files changed, 121 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-cfa10058.dts b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10058.dts new file mode 100644 index 0000000000..aae0f18014 --- /dev/null +++ b/arch/arm/boot/dts/nxp/mxs/imx28-cfa10058.dts @@ -0,0 +1,121 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2013 Crystalfontz America, Inc. + * Copyright 2013 Free Electrons + */ + +/* + * The CFA-10058 is an expansion board for the CFA-10036 module, thus we + * need to include the CFA-10036 DTS. + */ +#include "imx28-cfa10036.dts" + +/ { + model = "Crystalfontz CFA-10058 Board"; + compatible = "crystalfontz,cfa10058", "crystalfontz,cfa10036", "fsl,imx28"; + + reg_usb1_vbus: regulator-0 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb_pins_cfa10058>; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio0 7 1>; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 3 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_cfa10058>; + display = <&display0>; + status = "okay"; + + display0: display0 { + bits-per-pixel = <32>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <30000000>; + hactive = <800>; + vactive = <480>; + hback-porch = <40>; + hfront-porch = <40>; + vback-porch = <13>; + vfront-porch = <29>; + hsync-len = <8>; + vsync-len = <8>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&lradc { + fsl,lradc-touchscreen-wires = <4>; + status = "okay"; +}; + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>; + phy-reset-duration = <100>; + status = "okay"; +}; + +&pinctrl { + usb_pins_cfa10058: usb-10058@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_GPMI_D07__GPIO_0_7 + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + + lcdif_pins_cfa10058: lcdif-10058@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RD_E__LCD_VSYNC + MX28_PAD_LCD_WR_RWN__LCD_HSYNC + MX28_PAD_LCD_RS__LCD_DOTCLK + MX28_PAD_LCD_CS__LCD_ENABLE + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_b>; + status = "okay"; +}; + +&usb1 { + vbus-supply = <®_usb1_vbus>; + pinctrl-0 = <&usb1_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; |