diff options
Diffstat (limited to 'arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts')
-rw-r--r-- | arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts | 876 |
1 files changed, 876 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts new file mode 100644 index 0000000000..df1335492a --- /dev/null +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts @@ -0,0 +1,876 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// +// Copyright (C) 2016-2018 Zodiac Inflight Innovations + +/dts-v1/; +#include "vf610.dtsi" + +/ { + model = "ZII VF610 SCU4 AIB"; + compatible = "zii,vf610scu4-aib", "zii,vf610dev", "fsl,vf610"; + + chosen { + stdout-path = &uart0; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pinctrl_leds_debug>; + pinctrl-names = "default"; + + led-debug { + label = "zii:green:debug1"; + gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + mdio-mux { + compatible = "mdio-mux-gpio"; + pinctrl-0 = <&pinctrl_mdio_mux>; + pinctrl-names = "default"; + gpios = <&gpio4 4 GPIO_ACTIVE_HIGH + &gpio4 5 GPIO_ACTIVE_HIGH + &gpio3 30 GPIO_ACTIVE_HIGH + &gpio3 31 GPIO_ACTIVE_HIGH>; + mdio-parent-bus = <&mdio1>; + #address-cells = <1>; + #size-cells = <0>; + + mdio_mux_1: mdio@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + switch0: switch0@0 { + compatible = "marvell,mv88e6190"; + reg = <0>; + dsa,member = <0 0>; + eeprom-length = <65536>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + phy-mode = "rmii"; + ethernet = <&fec1>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "aib2main_1"; + }; + + port@2 { + reg = <2>; + label = "aib2main_2"; + }; + + port@3 { + reg = <3>; + label = "eth_cu_1000_5"; + }; + + port@4 { + reg = <4>; + label = "eth_cu_1000_6"; + }; + + port@5 { + reg = <5>; + label = "eth_cu_1000_4"; + }; + + port@6 { + reg = <6>; + label = "eth_cu_1000_7"; + }; + + port@7 { + reg = <7>; + label = "modem_pic"; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + switch0port10: port@10 { + reg = <10>; + label = "dsa"; + phy-mode = "xgmii"; + link = <&switch1port10 + &switch3port10 + &switch2port10>; + + fixed-link { + speed = <10000>; + full-duplex; + }; + }; + }; + }; + }; + + mdio_mux_2: mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + switch1: switch1@0 { + compatible = "marvell,mv88e6190"; + reg = <0>; + dsa,member = <0 1>; + eeprom-length = <65536>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + label = "eth_cu_1000_3"; + }; + + port@2 { + reg = <2>; + label = "eth_cu_100_2"; + }; + + port@3 { + reg = <3>; + label = "eth_cu_100_3"; + }; + + switch1port9: port@9 { + reg = <9>; + label = "dsa"; + phy-mode = "xgmii"; + link = <&switch3port10 + &switch2port10>; + + fixed-link { + speed = <10000>; + full-duplex; + }; + }; + + switch1port10: port@10 { + reg = <10>; + label = "dsa"; + phy-mode = "xgmii"; + link = <&switch0port10>; + + fixed-link { + speed = <10000>; + full-duplex; + }; + }; + }; + }; + }; + + mdio_mux_4: mdio@4 { + reg = <4>; + #address-cells = <1>; + #size-cells = <0>; + + switch2: switch2@0 { + compatible = "marvell,mv88e6190"; + reg = <0>; + dsa,member = <0 2>; + eeprom-length = <65536>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + reg = <2>; + label = "eth_fc_1000_2"; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sff1>; + }; + + port@3 { + reg = <3>; + label = "eth_fc_1000_3"; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sff2>; + }; + + port@4 { + reg = <4>; + label = "eth_fc_1000_4"; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sff3>; + }; + + port@5 { + reg = <5>; + label = "eth_fc_1000_5"; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sff4>; + }; + + port@6 { + reg = <6>; + label = "eth_fc_1000_6"; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sff5>; + }; + + port@7 { + reg = <7>; + label = "eth_fc_1000_7"; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sff6>; + }; + + port@9 { + reg = <9>; + label = "eth_fc_1000_1"; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sff0>; + }; + + switch2port10: port@10 { + reg = <10>; + label = "dsa"; + phy-mode = "2500base-x"; + link = <&switch3port9 + &switch1port9 + &switch0port10>; + + fixed-link { + speed = <2500>; + full-duplex; + }; + }; + }; + }; + }; + + mdio_mux_8: mdio@8 { + reg = <8>; + #address-cells = <1>; + #size-cells = <0>; + + switch3: switch3@0 { + compatible = "marvell,mv88e6190"; + reg = <0>; + dsa,member = <0 3>; + eeprom-length = <65536>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@2 { + reg = <2>; + label = "eth_fc_1000_8"; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sff7>; + }; + + port@3 { + reg = <3>; + label = "eth_fc_1000_9"; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sff8>; + }; + + port@4 { + reg = <4>; + label = "eth_fc_1000_10"; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sff9>; + }; + + switch3port9: port@9 { + reg = <9>; + label = "dsa"; + phy-mode = "2500base-x"; + link = <&switch2port10>; + + fixed-link { + speed = <2500>; + full-duplex; + }; + }; + + switch3port10: port@10 { + reg = <10>; + label = "dsa"; + phy-mode = "xgmii"; + link = <&switch1port9 + &switch0port10>; + + fixed-link { + speed = <10000>; + full-duplex; + }; + }; + }; + }; + }; + }; + + sff0: sff0 { + compatible = "sff,sff"; + i2c-bus = <&sff0_i2c>; + los-gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + }; + + sff1: sff1 { + compatible = "sff,sff"; + i2c-bus = <&sff1_i2c>; + los-gpios = <&gpio9 1 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; + }; + + sff2: sff2 { + compatible = "sff,sff"; + i2c-bus = <&sff2_i2c>; + los-gpios = <&gpio9 2 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>; + }; + + sff3: sff3 { + compatible = "sff,sff"; + i2c-bus = <&sff3_i2c>; + los-gpios = <&gpio9 3 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>; + }; + + sff4: sff4 { + compatible = "sff,sff"; + i2c-bus = <&sff4_i2c>; + los-gpios = <&gpio9 4 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>; + }; + + sff5: sff5 { + compatible = "sff,sff"; + i2c-bus = <&sff5_i2c>; + los-gpios = <&gpio9 5 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio7 5 GPIO_ACTIVE_HIGH>; + }; + + sff6: sff6 { + compatible = "sff,sff"; + i2c-bus = <&sff6_i2c>; + los-gpios = <&gpio9 6 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>; + }; + + sff7: sff7 { + compatible = "sff,sff"; + i2c-bus = <&sff7_i2c>; + los-gpios = <&gpio9 7 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>; + }; + + sff8: sff8 { + compatible = "sff,sff"; + i2c-bus = <&sff8_i2c>; + los-gpios = <&gpio9 8 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; + }; + + sff9: sff9 { + compatible = "sff,sff"; + i2c-bus = <&sff9_i2c>; + los-gpios = <&gpio9 9 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>; + }; + + reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_mcu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&dspi0 { + pinctrl-0 = <&pinctrl_dspi0>; + pinctrl-names = "default"; + bus-num = <0>; + status = "okay"; + + adc@5 { + compatible = "holt,hi8435"; + reg = <5>; + gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; + spi-max-frequency = <1000000>; + }; +}; + +&dspi1 { + bus-num = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi1>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partition@0 { + label = "m25p128-0"; + reg = <0x0 0x01000000>; + }; + }; + + flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <1>; + spi-max-frequency = <50000000>; + + partition@0 { + label = "m25p128-1"; + reg = <0x0 0x01000000>; + }; + }; +}; + +&adc0 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&adc1 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&edma0 { + status = "okay"; +}; + +&edma1 { + status = "okay"; +}; + +&esdhc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc0>; + bus-width = <8>; + non-removable; + no-1-8-v; + no-sd; + no-sdio; + keep-power-in-suspend; + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + no-sdio; + status = "okay"; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; + + fixed-link { + speed = <100>; + full-duplex; + }; + + mdio1: mdio { + #address-cells = <1>; + #size-cells = <0>; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + status = "okay"; + + gpio5: io-expander@20 { + compatible = "nxp,pca9554"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio6: io-expander@22 { + compatible = "nxp,pca9554"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + temp-sensor@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + eeprom@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + }; + + eeprom@52 { + compatible = "atmel,24c04"; + reg = <0x52>; + }; + + elapsed-time-recorder@6b { + compatible = "dallas,ds1682"; + reg = <0x6b>; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + watchdog@38 { + compatible = "zii,rave-wdt"; + reg = <0x38>; + }; + + adc@4a { + compatible = "adi,adt7411"; + reg = <0x4a>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + gpio9: io-expander@20 { + compatible = "semtech,sx1503q"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sx1503_20>; + #gpio-cells = <2>; + reg = <0x20>; + gpio-controller; + interrupt-parent = <&gpio1>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; + }; + + temp-sensor@4e { + compatible = "national,lm75"; + reg = <0x4e>; + }; + + temp-sensor@4f { + compatible = "national,lm75"; + reg = <0x4f>; + }; + + gpio7: io-expander@23 { + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x23>; + }; + + adc@4a { + compatible = "adi,adt7411"; + reg = <0x4a>; + }; + + eeprom@54 { + compatible = "atmel,24c08"; + reg = <0x54>; + }; + + i2c-mux@70 { + compatible = "nxp,pca9548"; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + sff0_i2c: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + sff1_i2c: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + sff2_i2c: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + sff3_i2c: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + sff4_i2c: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + }; + + i2c-mux@71 { + compatible = "nxp,pca9548"; + pinctrl-names = "default"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; + + sff5_i2c: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + sff6_i2c: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + sff7_i2c: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + sff8_i2c: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + sff9_i2c: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + }; +}; + +&snvsrtc { + status = "disabled"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "okay"; +}; + +&uart1 { + linux,rs485-enabled-at-boot-time; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + linux,rs485-enabled-at-boot-time; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&iomuxc { + pinctrl_dspi0: dspi0grp { + fsl,pins = < + VF610_PAD_PTB19__DSPI0_CS0 0x1182 + VF610_PAD_PTB18__DSPI0_CS1 0x1182 + VF610_PAD_PTB13__DSPI0_CS4 0x1182 + VF610_PAD_PTB12__DSPI0_CS5 0x1182 + VF610_PAD_PTB20__DSPI0_SIN 0x1181 + VF610_PAD_PTB21__DSPI0_SOUT 0x1182 + VF610_PAD_PTB22__DSPI0_SCK 0x1182 + >; + }; + + pinctrl_dspi1: dspi1grp { + fsl,pins = < + VF610_PAD_PTD5__DSPI1_CS0 0x1182 + VF610_PAD_PTD4__DSPI1_CS1 0x1182 + VF610_PAD_PTC6__DSPI1_SIN 0x1181 + VF610_PAD_PTC7__DSPI1_SOUT 0x1182 + VF610_PAD_PTC8__DSPI1_SCK 0x1182 + >; + }; + + pinctrl_dspi2: dspi2gpio { + fsl,pins = < + VF610_PAD_PTD30__GPIO_64 0x33e2 + VF610_PAD_PTD29__GPIO_65 0x33e1 + VF610_PAD_PTD28__GPIO_66 0x33e2 + VF610_PAD_PTD27__GPIO_67 0x33e2 + VF610_PAD_PTD26__GPIO_68 0x31c2 + >; + }; + + pinctrl_esdhc0: esdhc0grp { + fsl,pins = < + VF610_PAD_PTC0__ESDHC0_CLK 0x31ef + VF610_PAD_PTC1__ESDHC0_CMD 0x31ef + VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef + VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef + VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef + VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef + VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef + VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef + VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef + VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTA6__RMII_CLKIN 0x30d1 + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; + + pinctrl_i2c0: i2c0grp { + fsl,pins = < + VF610_PAD_PTB14__I2C0_SCL 0x37ff + VF610_PAD_PTB15__I2C0_SDA 0x37ff + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + VF610_PAD_PTB16__I2C1_SCL 0x37ff + VF610_PAD_PTB17__I2C1_SDA 0x37ff + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + VF610_PAD_PTA22__I2C2_SCL 0x37ff + VF610_PAD_PTA23__I2C2_SDA 0x37ff + >; + }; + + pinctrl_leds_debug: pinctrl-leds-debug { + fsl,pins = < + VF610_PAD_PTB26__GPIO_96 0x31c2 + >; + }; + + pinctrl_mdio_mux: pinctrl-mdio-mux { + fsl,pins = < + VF610_PAD_PTE27__GPIO_132 0x31c2 + VF610_PAD_PTE28__GPIO_133 0x31c2 + VF610_PAD_PTE21__GPIO_126 0x31c2 + VF610_PAD_PTE22__GPIO_127 0x31c2 + >; + }; + + pinctrl_qspi0: qspi0grp { + fsl,pins = < + VF610_PAD_PTD7__QSPI0_B_QSCK 0x31c3 + VF610_PAD_PTD8__QSPI0_B_CS0 0x31ff + VF610_PAD_PTD9__QSPI0_B_DATA3 0x31c3 + VF610_PAD_PTD10__QSPI0_B_DATA2 0x31c3 + VF610_PAD_PTD11__QSPI0_B_DATA1 0x31c3 + VF610_PAD_PTD12__QSPI0_B_DATA0 0x31c3 + >; + }; + + pinctrl_sx1503_20: pinctrl-sx1503-20 { + fsl,pins = < + VF610_PAD_PTD31__GPIO_63 0x219d + >; + }; + + pinctrl_uart0: uart0grp { + fsl,pins = < + VF610_PAD_PTB10__UART0_TX 0x21a2 + VF610_PAD_PTB11__UART0_RX 0x21a1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + VF610_PAD_PTB23__UART1_TX 0x21a2 + VF610_PAD_PTB24__UART1_RX 0x21a1 + VF610_PAD_PTB25__UART1_RTS 0x21a2 /* Used as DE signal for the RS-485 transceiver */ + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + VF610_PAD_PTD0__UART2_TX 0x21a2 + VF610_PAD_PTD1__UART2_RX 0x21a1 + VF610_PAD_PTD2__UART2_RTS 0x21a2 /* Used as DE signal for the RS-485 transceiver */ + >; + }; +}; |